drivers/block/cciss.h

   1 #ifndef CCISS_H
   2 #define CCISS_H
   3
   4 #include <linux/genhd.h>
   5 #include <linux/mutex.h>
   6
   7 #include "cciss_cmd.h"
   8
   9
  10 #define NWD_SHIFT       4
  11 #define MAX_PART        (1 << NWD_SHIFT)
  12
  13 #define IO_OK           0
  14 #define IO_ERROR        1
  15 #define IO_NEEDS_RETRY  3
  16
  17 #define VENDOR_LEN      8
  18 #define MODEL_LEN       16
  19 #define REV_LEN         4
  20
  21 struct ctlr_info;
  22 typedef struct ctlr_info ctlr_info_t;
  23
  24 struct access_method {
  25         void (*submit_command)(ctlr_info_t *h, CommandList_struct *c);
  26         void (*set_intr_mask)(ctlr_info_t *h, unsigned long val);
  27         unsigned long (*fifo_full)(ctlr_info_t *h);
  28         bool (*intr_pending)(ctlr_info_t *h);
  29         unsigned long (*command_completed)(ctlr_info_t *h);
  30 };
  31 typedef struct _drive_info_struct
  32 {
  33         unsigned char LunID[8];
  34         int     usage_count;
  35         struct request_queue *queue;
  36         sector_t nr_blocks;
  37         int     block_size;
  38         int     heads;
  39         int     sectors;
  40         int     cylinders;
  41         int     raid_level; /* set to -1 to indicate that
  42                              * the drive is not in use/configured
  43                              */
  44         int     busy_configuring; /* This is set when a drive is being removed
  45                                    * to prevent it from being opened or it's
  46                                    * queue from being started.
  47                                    */
  48         struct  device dev;
  49         __u8 serial_no[16]; /* from inquiry page 0x83,
  50                              * not necc. null terminated.
  51                              */
  52         char vendor[VENDOR_LEN + 1]; /* SCSI vendor string */
  53         char model[MODEL_LEN + 1];   /* SCSI model string */
  54         char rev[REV_LEN + 1];       /* SCSI revision string */
  55         char device_initialized;     /* indicates whether dev is initialized */
  56 } drive_info_struct;
  57
  58 struct ctlr_info
  59 {
  60         int     ctlr;
  61         char    devname[8];
  62         char    *product_name;
  63         char    firm_ver[4]; /* Firmware version */
  64         struct pci_dev *pdev;
  65         __u32   board_id;
  66         void __iomem *vaddr;
  67         unsigned long paddr;
  68         int     nr_cmds; /* Number of commands allowed on this controller */
  69         CfgTable_struct __iomem *cfgtable;
  70         int     interrupts_enabled;
  71         int     major;
  72         int     max_commands;
  73         int     commands_outstanding;
  74         int     max_outstanding; /* Debug */
  75         int     num_luns;
  76         int     highest_lun;
  77         int     usage_count;  /* number of opens all all minor devices */
  78         /* Need space for temp sg list
  79          * number of scatter/gathers supported
  80          * number of scatter/gathers in chained block
  81          */
  82         struct  scatterlist **scatter_list;
  83         int     maxsgentries;
  84         int     chainsize;
  85         int     max_cmd_sgentries;
  86         SGDescriptor_struct **cmd_sg_list;
  87
  88 #       define PERF_MODE_INT    0
  89 #       define DOORBELL_INT     1
  90 #       define SIMPLE_MODE_INT  2
  91 #       define MEMQ_MODE_INT    3
  92         unsigned int intr[4];
  93         unsigned int msix_vector;
  94         unsigned int msi_vector;
  95         int     intr_mode;
  96         int     cciss_max_sectors;
  97         BYTE    cciss_read;
  98         BYTE    cciss_write;
  99         BYTE    cciss_read_capacity;
 100
 101         /* information about each logical volume */
 102         drive_info_struct *drv[CISS_MAX_LUN];
 103
 104         struct access_method access;
 105
 106         /* queue and queue Info */
 107         struct list_head reqQ;
 108         struct list_head cmpQ;
 109         unsigned int Qdepth;
 110         unsigned int maxQsinceinit;
 111         unsigned int maxSG;
 112         spinlock_t lock;
 113
 114         /* pointers to command and error info pool */
 115         CommandList_struct      *cmd_pool;
 116         dma_addr_t              cmd_pool_dhandle;
 117         ErrorInfo_struct        *errinfo_pool;
 118         dma_addr_t              errinfo_pool_dhandle;
 119         unsigned long           *cmd_pool_bits;
 120         int                     nr_allocs;
 121         int                     nr_frees;
 122         int                     busy_configuring;
 123         int                     busy_initializing;
 124         int                     busy_scanning;
 125         struct mutex            busy_shutting_down;
 126
 127         /* This element holds the zero based queue number of the last
 128          * queue to be started.  It is used for fairness.
 129         */
 130         int                     next_to_run;
 131
 132         /* Disk structures we need to pass back */
 133         struct gendisk   *gendisk[CISS_MAX_LUN];
 134 #ifdef CONFIG_CISS_SCSI_TAPE
 135         struct cciss_scsi_adapter_data_t *scsi_ctlr;
 136 #endif
 137         unsigned char alive;
 138         struct list_head scan_list;
 139         struct completion scan_wait;
 140         struct device dev;
 141         /*
 142          * Performant mode tables.
 143          */
 144         u32 trans_support;
 145         u32 trans_offset;
 146         struct TransTable_struct *transtable;
 147         unsigned long transMethod;
 148
 149         /*
 150          * Performant mode completion buffer
 151          */
 152         u64 *reply_pool;
 153         dma_addr_t reply_pool_dhandle;
 154         u64 *reply_pool_head;
 155         size_t reply_pool_size;
 156         unsigned char reply_pool_wraparound;
 157         u32 *blockFetchTable;
 158 };
 159
 160 /*  Defining the diffent access_methods
 161  *
 162  * Memory mapped FIFO interface (SMART 53xx cards)
 163  */
 164 #define SA5_DOORBELL    0x20
 165 #define SA5_REQUEST_PORT_OFFSET 0x40
 166 #define SA5_REPLY_INTR_MASK_OFFSET      0x34
 167 #define SA5_REPLY_PORT_OFFSET           0x44
 168 #define SA5_INTR_STATUS         0x30
 169 #define SA5_SCRATCHPAD_OFFSET   0xB0
 170
 171 #define SA5_CTCFG_OFFSET        0xB4
 172 #define SA5_CTMEM_OFFSET        0xB8
 173
 174 #define SA5_INTR_OFF            0x08
 175 #define SA5B_INTR_OFF           0x04
 176 #define SA5_INTR_PENDING        0x08
 177 #define SA5B_INTR_PENDING       0x04
 178 #define FIFO_EMPTY              0xffffffff
 179 #define CCISS_FIRMWARE_READY    0xffff0000 /* value in scratchpad register */
 180 /* Perf. mode flags */
 181 #define SA5_PERF_INTR_PENDING   0x04
 182 #define SA5_PERF_INTR_OFF       0x05
 183 #define SA5_OUTDB_STATUS_PERF_BIT       0x01
 184 #define SA5_OUTDB_CLEAR_PERF_BIT        0x01
 185 #define SA5_OUTDB_CLEAR         0xA0
 186 #define SA5_OUTDB_CLEAR_PERF_BIT        0x01
 187 #define SA5_OUTDB_STATUS        0x9C
 188
 189
 190 #define  CISS_ERROR_BIT         0x02
 191
 192 #define CCISS_INTR_ON   1
 193 #define CCISS_INTR_OFF  0
 194
 195
 196 /* CCISS_BOARD_READY_WAIT_SECS is how long to wait for a board
 197  * to become ready, in seconds, before giving up on it.
 198  * CCISS_BOARD_READY_POLL_INTERVAL_MSECS * is how long to wait
 199  * between polling the board to see if it is ready, in
 200  * milliseconds.  CCISS_BOARD_READY_ITERATIONS is derived
 201  * the above.
 202  */
 203 #define CCISS_BOARD_READY_WAIT_SECS (120)
 204 #define CCISS_BOARD_NOT_READY_WAIT_SECS (100)
 205 #define CCISS_BOARD_READY_POLL_INTERVAL_MSECS (100)
 206 #define CCISS_BOARD_READY_ITERATIONS \
 207         ((CCISS_BOARD_READY_WAIT_SECS * 1000) / \
 208                 CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
 209 #define CCISS_BOARD_NOT_READY_ITERATIONS \
 210         ((CCISS_BOARD_NOT_READY_WAIT_SECS * 1000) / \
 211                 CCISS_BOARD_READY_POLL_INTERVAL_MSECS)
 212 #define CCISS_POST_RESET_PAUSE_MSECS (3000)
 213 #define CCISS_POST_RESET_NOOP_INTERVAL_MSECS (4000)
 214 #define CCISS_POST_RESET_NOOP_RETRIES (12)
 215 #define CCISS_POST_RESET_NOOP_TIMEOUT_MSECS (10000)
 216
 217 /*
 218         Send the command to the hardware
 219 */
 220 static void SA5_submit_command( ctlr_info_t *h, CommandList_struct *c)
 221 {
 222 #ifdef CCISS_DEBUG
 223         printk(KERN_WARNING "cciss%d: Sending %08x - down to controller\n",
 224                         h->ctlr, c->busaddr);
 225 #endif /* CCISS_DEBUG */
 226          writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
 227         readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
 228          h->commands_outstanding++;
 229          if ( h->commands_outstanding > h->max_outstanding)
 230                 h->max_outstanding = h->commands_outstanding;
 231 }
 232
 233 /*
 234  *  This card is the opposite of the other cards.
 235  *   0 turns interrupts on...
 236  *   0x08 turns them off...
 237  */
 238 static void SA5_intr_mask(ctlr_info_t *h, unsigned long val)
 239 {
 240         if (val)
 241         { /* Turn interrupts on */
 242                 h->interrupts_enabled = 1;
 243                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 244                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 245         } else /* Turn them off */
 246         {
 247                 h->interrupts_enabled = 0;
 248                 writel( SA5_INTR_OFF,
 249                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 250                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 251         }
 252 }
 253 /*
 254  *  This card is the opposite of the other cards.
 255  *   0 turns interrupts on...
 256  *   0x04 turns them off...
 257  */
 258 static void SA5B_intr_mask(ctlr_info_t *h, unsigned long val)
 259 {
 260         if (val)
 261         { /* Turn interrupts on */
 262                 h->interrupts_enabled = 1;
 263                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 264                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 265         } else /* Turn them off */
 266         {
 267                 h->interrupts_enabled = 0;
 268                 writel( SA5B_INTR_OFF,
 269                         h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 270                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 271         }
 272 }
 273
 274 /* Performant mode intr_mask */
 275 static void SA5_performant_intr_mask(ctlr_info_t *h, unsigned long val)
 276 {
 277         if (val) { /* turn on interrupts */
 278                 h->interrupts_enabled = 1;
 279                 writel(0, h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 280                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 281         } else {
 282                 h->interrupts_enabled = 0;
 283                 writel(SA5_PERF_INTR_OFF,
 284                                 h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 285                 (void) readl(h->vaddr + SA5_REPLY_INTR_MASK_OFFSET);
 286         }
 287 }
 288
 289 /*
 290  *  Returns true if fifo is full.
 291  *
 292  */
 293 static unsigned long SA5_fifo_full(ctlr_info_t *h)
 294 {
 295         if( h->commands_outstanding >= h->max_commands)
 296                 return(1);
 297         else
 298                 return(0);
 299
 300 }
 301 /*
 302  *   returns value read from hardware.
 303  *     returns FIFO_EMPTY if there is nothing to read
 304  */
 305 static unsigned long SA5_completed(ctlr_info_t *h)
 306 {
 307         unsigned long register_value
 308                 = readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
 309         if(register_value != FIFO_EMPTY)
 310         {
 311                 h->commands_outstanding--;
 312 #ifdef CCISS_DEBUG
 313                 printk("cciss:  Read %lx back from board\n", register_value);
 314 #endif /* CCISS_DEBUG */
 315         }
 316 #ifdef CCISS_DEBUG
 317         else
 318         {
 319                 printk("cciss:  FIFO Empty read\n");
 320         }
 321 #endif
 322         return ( register_value);
 323
 324 }
 325
 326 /* Performant mode command completed */
 327 static unsigned long SA5_performant_completed(ctlr_info_t *h)
 328 {
 329         unsigned long register_value = FIFO_EMPTY;
 330
 331         /* flush the controller write of the reply queue by reading
 332          * outbound doorbell status register.
 333          */
 334         register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 335         /* msi auto clears the interrupt pending bit. */
 336         if (!(h->msi_vector || h->msix_vector)) {
 337                 writel(SA5_OUTDB_CLEAR_PERF_BIT, h->vaddr + SA5_OUTDB_CLEAR);
 338                 /* Do a read in order to flush the write to the controller
 339                  * (as per spec.)
 340                  */
 341                 register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 342         }
 343
 344         if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
 345                 register_value = *(h->reply_pool_head);
 346                 (h->reply_pool_head)++;
 347                 h->commands_outstanding--;
 348         } else {
 349                 register_value = FIFO_EMPTY;
 350         }
 351         /* Check for wraparound */
 352         if (h->reply_pool_head == (h->reply_pool + h->max_commands)) {
 353                 h->reply_pool_head = h->reply_pool;
 354                 h->reply_pool_wraparound ^= 1;
 355         }
 356
 357         return register_value;
 358 }
 359 /*
 360  *      Returns true if an interrupt is pending..
 361  */
 362 static bool SA5_intr_pending(ctlr_info_t *h)
 363 {
 364         unsigned long register_value  =
 365                 readl(h->vaddr + SA5_INTR_STATUS);
 366 #ifdef CCISS_DEBUG
 367         printk("cciss: intr_pending %lx\n", register_value);
 368 #endif  /* CCISS_DEBUG */
 369         if( register_value &  SA5_INTR_PENDING)
 370                 return  1;
 371         return 0 ;
 372 }
 373
 374 /*
 375  *      Returns true if an interrupt is pending..
 376  */
 377 static bool SA5B_intr_pending(ctlr_info_t *h)
 378 {
 379         unsigned long register_value  =
 380                 readl(h->vaddr + SA5_INTR_STATUS);
 381 #ifdef CCISS_DEBUG
 382         printk("cciss: intr_pending %lx\n", register_value);
 383 #endif  /* CCISS_DEBUG */
 384         if( register_value &  SA5B_INTR_PENDING)
 385                 return  1;
 386         return 0 ;
 387 }
 388
 389 static bool SA5_performant_intr_pending(ctlr_info_t *h)
 390 {
 391         unsigned long register_value = readl(h->vaddr + SA5_INTR_STATUS);
 392
 393         if (!register_value)
 394                 return false;
 395
 396         if (h->msi_vector || h->msix_vector)
 397                 return true;
 398
 399         /* Read outbound doorbell to flush */
 400         register_value = readl(h->vaddr + SA5_OUTDB_STATUS);
 401         return register_value & SA5_OUTDB_STATUS_PERF_BIT;
 402 }
 403
 404 static struct access_method SA5_access = {
 405         SA5_submit_command,
 406         SA5_intr_mask,
 407         SA5_fifo_full,
 408         SA5_intr_pending,
 409         SA5_completed,
 410 };
 411
 412 static struct access_method SA5B_access = {
 413         SA5_submit_command,
 414         SA5B_intr_mask,
 415         SA5_fifo_full,
 416         SA5B_intr_pending,
 417         SA5_completed,
 418 };
 419
 420 static struct access_method SA5_performant_access = {
 421         SA5_submit_command,
 422         SA5_performant_intr_mask,
 423         SA5_fifo_full,
 424         SA5_performant_intr_pending,
 425         SA5_performant_completed,
 426 };
 427
 428 struct board_type {
 429         __u32   board_id;
 430         char    *product_name;
 431         struct access_method *access;
 432         int nr_cmds; /* Max cmds this kind of ctlr can handle. */
 433 };
 434
 435 #endif /* CCISS_H */