arch/arm/mach-at91/board-yl-9200.c

   1 /*
   2  * linux/arch/arm/mach-at91/board-yl-9200.c
   3  *
   4  * Adapted from various board files in arch/arm/mach-at91
   5  *
   6  * Modifications for YL-9200 platform:
   7  *  Copyright (C) 2007 S. Birtles
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License as published by
  11  * the Free Software Foundation; either version 2 of the License, or
  12  * (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * You should have received a copy of the GNU General Public License
  20  * along with this program; if not, write to the Free Software
  21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  22  */
  23
  24 #include <linux/types.h>
  25 #include <linux/gpio.h>
  26 #include <linux/init.h>
  27 #include <linux/mm.h>
  28 #include <linux/module.h>
  29 #include <linux/dma-mapping.h>
  30 #include <linux/platform_device.h>
  31 #include <linux/spi/spi.h>
  32 #include <linux/spi/ads7846.h>
  33 #include <linux/mtd/physmap.h>
  34 #include <linux/gpio_keys.h>
  35 #include <linux/input.h>
  36
  37 #include <asm/setup.h>
  38 #include <asm/mach-types.h>
  39 #include <asm/irq.h>
  40
  41 #include <asm/mach/arch.h>
  42 #include <asm/mach/map.h>
  43 #include <asm/mach/irq.h>
  44
  45 #include <mach/hardware.h>
  46 #include <mach/board.h>
  47 #include <mach/at91rm9200_mc.h>
  48 #include <mach/cpu.h>
  49
  50 #include "generic.h"
  51
  52
  53 static void __init yl9200_init_early(void)
  54 {
  55         /* Set cpu type: PQFP */
  56         at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
  57
  58         /* Initialize processor: 18.432 MHz crystal */
  59         at91_initialize(18432000);
  60
  61         /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */
  62         at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17);
  63
  64         /* DBGU on ttyS0. (Rx & Tx only) */
  65         at91_register_uart(0, 0, 0);
  66
  67         /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
  68         at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
  69                         | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
  70                         | ATMEL_UART_RI);
  71
  72         /* USART0 on ttyS2. (Rx & Tx only to JP3) */
  73         at91_register_uart(AT91RM9200_ID_US0, 2, 0);
  74
  75         /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
  76         at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
  77
  78         /* set serial console to ttyS0 (ie, DBGU) */
  79         at91_set_serial_console(0);
  80 }
  81
  82 /*
  83  * LEDs
  84  */
  85 static struct gpio_led yl9200_leds[] = {
  86         {       /* D2 */
  87                 .name                   = "led2",
  88                 .gpio                   = AT91_PIN_PB17,
  89                 .active_low             = 1,
  90                 .default_trigger        = "timer",
  91         },
  92         {       /* D3 */
  93                 .name                   = "led3",
  94                 .gpio                   = AT91_PIN_PB16,
  95                 .active_low             = 1,
  96                 .default_trigger        = "heartbeat",
  97         },
  98         {       /* D4 */
  99                 .name                   = "led4",
 100                 .gpio                   = AT91_PIN_PB15,
 101                 .active_low             = 1,
 102         },
 103         {       /* D5 */
 104                 .name                   = "led5",
 105                 .gpio                   = AT91_PIN_PB8,
 106                 .active_low             = 1,
 107         }
 108 };
 109
 110 /*
 111  * Ethernet
 112  */
 113 static struct macb_platform_data __initdata yl9200_eth_data = {
 114         .phy_irq_pin            = AT91_PIN_PB28,
 115         .is_rmii                = 1,
 116 };
 117
 118 /*
 119  * USB Host
 120  */
 121 static struct at91_usbh_data __initdata yl9200_usbh_data = {
 122         .ports                  = 1,    /* PQFP version of AT91RM9200 */
 123         .vbus_pin               = {-EINVAL, -EINVAL},
 124         .overcurrent_pin= {-EINVAL, -EINVAL},
 125 };
 126
 127 /*
 128  * USB Device
 129  */
 130 static struct at91_udc_data __initdata yl9200_udc_data = {
 131         .pullup_pin             = AT91_PIN_PC4,
 132         .vbus_pin               = AT91_PIN_PC5,
 133         .pullup_active_low      = 1,    /* Active Low due to PNP transistor (pg 7) */
 134
 135 };
 136
 137 /*
 138  * MMC
 139  */
 140 static struct at91_mmc_data __initdata yl9200_mmc_data = {
 141         .det_pin        = AT91_PIN_PB9,
 142         .wire4          = 1,
 143         .wp_pin         = -EINVAL,
 144         .vcc_pin        = -EINVAL,
 145 };
 146
 147 /*
 148  * NAND Flash
 149  */
 150 static struct mtd_partition __initdata yl9200_nand_partition[] = {
 151         {
 152                 .name   = "AT91 NAND partition 1, boot",
 153                 .offset = 0,
 154                 .size   = SZ_256K
 155         },
 156         {
 157                 .name   = "AT91 NAND partition 2, kernel",
 158                 .offset = MTDPART_OFS_NXTBLK,
 159                 .size   = (2 * SZ_1M) - SZ_256K
 160         },
 161         {
 162                 .name   = "AT91 NAND partition 3, filesystem",
 163                 .offset = MTDPART_OFS_NXTBLK,
 164                 .size   = 14 * SZ_1M
 165         },
 166         {
 167                 .name   = "AT91 NAND partition 4, storage",
 168                 .offset = MTDPART_OFS_NXTBLK,
 169                 .size   = SZ_16M
 170         },
 171         {
 172                 .name   = "AT91 NAND partition 5, ext-fs",
 173                 .offset = MTDPART_OFS_NXTBLK,
 174                 .size   = SZ_32M
 175         }
 176 };
 177
 178 static struct atmel_nand_data __initdata yl9200_nand_data = {
 179         .ale            = 6,
 180         .cle            = 7,
 181         .det_pin        = -EINVAL,
 182         .rdy_pin        = AT91_PIN_PC14,        /* R/!B (Sheet10) */
 183         .enable_pin     = AT91_PIN_PC15,        /* !CE  (Sheet10) */
 184         .parts          = yl9200_nand_partition,
 185         .num_parts      = ARRAY_SIZE(yl9200_nand_partition),
 186 };
 187
 188 /*
 189  * NOR Flash
 190  */
 191 #define YL9200_FLASH_BASE       AT91_CHIPSELECT_0
 192 #define YL9200_FLASH_SIZE       SZ_16M
 193
 194 static struct mtd_partition yl9200_flash_partitions[] = {
 195         {
 196                 .name           = "Bootloader",
 197                 .offset         = 0,
 198                 .size           = SZ_256K,
 199                 .mask_flags     = MTD_WRITEABLE,        /* force read-only */
 200         },
 201         {
 202                 .name           = "Kernel",
 203                 .offset         = MTDPART_OFS_NXTBLK,
 204                 .size           = (2 * SZ_1M) - SZ_256K
 205         },
 206         {
 207                 .name           = "Filesystem",
 208                 .offset         = MTDPART_OFS_NXTBLK,
 209                 .size           = MTDPART_SIZ_FULL
 210         }
 211 };
 212
 213 static struct physmap_flash_data yl9200_flash_data = {
 214         .width          = 2,
 215         .parts          = yl9200_flash_partitions,
 216         .nr_parts       = ARRAY_SIZE(yl9200_flash_partitions),
 217 };
 218
 219 static struct resource yl9200_flash_resources[] = {
 220         {
 221                 .start  = YL9200_FLASH_BASE,
 222                 .end    = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
 223                 .flags  = IORESOURCE_MEM,
 224         }
 225 };
 226
 227 static struct platform_device yl9200_flash = {
 228         .name           = "physmap-flash",
 229         .id             = 0,
 230         .dev            = {
 231                                 .platform_data  = &yl9200_flash_data,
 232                         },
 233         .resource       = yl9200_flash_resources,
 234         .num_resources  = ARRAY_SIZE(yl9200_flash_resources),
 235 };
 236
 237 /*
 238  * I2C (TWI)
 239  */
 240 static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
 241         {       /* EEPROM */
 242                 I2C_BOARD_INFO("24c128", 0x50),
 243         }
 244 };
 245
 246 /*
 247  * GPIO Buttons
 248 */
 249 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 250 static struct gpio_keys_button yl9200_buttons[] = {
 251         {
 252                 .gpio           = AT91_PIN_PA24,
 253                 .code           = BTN_2,
 254                 .desc           = "SW2",
 255                 .active_low     = 1,
 256                 .wakeup         = 1,
 257         },
 258         {
 259                 .gpio           = AT91_PIN_PB1,
 260                 .code           = BTN_3,
 261                 .desc           = "SW3",
 262                 .active_low     = 1,
 263                 .wakeup         = 1,
 264         },
 265         {
 266                 .gpio           = AT91_PIN_PB2,
 267                 .code           = BTN_4,
 268                 .desc           = "SW4",
 269                 .active_low     = 1,
 270                 .wakeup         = 1,
 271         },
 272         {
 273                 .gpio           = AT91_PIN_PB6,
 274                 .code           = BTN_5,
 275                 .desc           = "SW5",
 276                 .active_low     = 1,
 277                 .wakeup         = 1,
 278         }
 279 };
 280
 281 static struct gpio_keys_platform_data yl9200_button_data = {
 282         .buttons        = yl9200_buttons,
 283         .nbuttons       = ARRAY_SIZE(yl9200_buttons),
 284 };
 285
 286 static struct platform_device yl9200_button_device = {
 287         .name           = "gpio-keys",
 288         .id             = -1,
 289         .num_resources  = 0,
 290         .dev            = {
 291                 .platform_data  = &yl9200_button_data,
 292         }
 293 };
 294
 295 static void __init yl9200_add_device_buttons(void)
 296 {
 297         at91_set_gpio_input(AT91_PIN_PA24, 1);  /* SW2 */
 298         at91_set_deglitch(AT91_PIN_PA24, 1);
 299         at91_set_gpio_input(AT91_PIN_PB1, 1);   /* SW3 */
 300         at91_set_deglitch(AT91_PIN_PB1, 1);
 301         at91_set_gpio_input(AT91_PIN_PB2, 1);   /* SW4 */
 302         at91_set_deglitch(AT91_PIN_PB2, 1);
 303         at91_set_gpio_input(AT91_PIN_PB6, 1);   /* SW5 */
 304         at91_set_deglitch(AT91_PIN_PB6, 1);
 305
 306         /* Enable buttons (Sheet 5) */
 307         at91_set_gpio_output(AT91_PIN_PB7, 1);
 308
 309         platform_device_register(&yl9200_button_device);
 310 }
 311 #else
 312 static void __init yl9200_add_device_buttons(void) {}
 313 #endif
 314
 315 /*
 316  * Touchscreen
 317  */
 318 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 319 static int ads7843_pendown_state(void)
 320 {
 321         return !at91_get_gpio_value(AT91_PIN_PB11);     /* Touchscreen PENIRQ */
 322 }
 323
 324 static struct ads7846_platform_data ads_info = {
 325         .model                  = 7843,
 326         .x_min                  = 150,
 327         .x_max                  = 3830,
 328         .y_min                  = 190,
 329         .y_max                  = 3830,
 330         .vref_delay_usecs       = 100,
 331
 332         /* For a 8" touch-screen */
 333         // .x_plate_ohms                = 603,
 334         // .y_plate_ohms                = 332,
 335
 336         /* For a 10.4" touch-screen */
 337         // .x_plate_ohms                = 611,
 338         // .y_plate_ohms                = 325,
 339
 340         .x_plate_ohms           = 576,
 341         .y_plate_ohms           = 366,
 342
 343         .pressure_max           = 15000, /* generally nonsense on the 7843 */
 344         .debounce_max           = 1,
 345         .debounce_rep           = 0,
 346         .debounce_tol           = (~0),
 347         .get_pendown_state      = ads7843_pendown_state,
 348 };
 349
 350 static void __init yl9200_add_device_ts(void)
 351 {
 352         at91_set_gpio_input(AT91_PIN_PB11, 1);  /* Touchscreen interrupt pin */
 353         at91_set_gpio_input(AT91_PIN_PB10, 1);  /* Touchscreen BUSY signal - not used! */
 354 }
 355 #else
 356 static void __init yl9200_add_device_ts(void) {}
 357 #endif
 358
 359 /*
 360  * SPI devices
 361  */
 362 static struct spi_board_info yl9200_spi_devices[] = {
 363 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 364         {       /* Touchscreen */
 365                 .modalias       = "ads7846",
 366                 .chip_select    = 0,
 367                 .max_speed_hz   = 5000 * 26,
 368                 .platform_data  = &ads_info,
 369                 .irq            = AT91_PIN_PB11,
 370         },
 371 #endif
 372         {       /* CAN */
 373                 .modalias       = "mcp2510",
 374                 .chip_select    = 1,
 375                 .max_speed_hz   = 25000 * 26,
 376                 .irq            = AT91_PIN_PC0,
 377         }
 378 };
 379
 380 /*
 381  * LCD / VGA
 382  *
 383  * EPSON S1D13806 FB (discontinued chip)
 384  * EPSON S1D13506 FB
 385  */
 386 #if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
 387 #include <video/s1d13xxxfb.h>
 388
 389
 390 static void yl9200_init_video(void)
 391 {
 392         /* NWAIT Signal */
 393         at91_set_A_periph(AT91_PIN_PC6, 0);
 394
 395         /* Initialization of the Static Memory Controller for Chip Select 2 */
 396         at91_sys_write(AT91_SMC_CSR(2), AT91_SMC_DBW_16         /* 16 bit */
 397                         | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4)    /* wait states */
 398                         | AT91_SMC_TDF_(0x100)                  /* float time */
 399         );
 400 }
 401
 402 static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
 403 {
 404         {S1DREG_MISC,                   0x00},  /* Miscellaneous Register*/
 405         {S1DREG_COM_DISP_MODE,          0x01},  /* Display Mode Register, LCD only*/
 406         {S1DREG_GPIO_CNF0,              0x00},  /* General IO Pins Configuration Register*/
 407         {S1DREG_GPIO_CTL0,              0x00},  /* General IO Pins Control Register*/
 408         {S1DREG_CLK_CNF,                0x11},  /* Memory Clock Configuration Register*/
 409         {S1DREG_LCD_CLK_CNF,            0x10},  /* LCD Pixel Clock Configuration Register*/
 410         {S1DREG_CRT_CLK_CNF,            0x12},  /* CRT/TV Pixel Clock Configuration Register*/
 411         {S1DREG_MPLUG_CLK_CNF,          0x01},  /* MediaPlug Clock Configuration Register*/
 412         {S1DREG_CPU2MEM_WST_SEL,        0x02},  /* CPU To Memory Wait State Select Register*/
 413         {S1DREG_MEM_CNF,                0x00},  /* Memory Configuration Register*/
 414         {S1DREG_SDRAM_REF_RATE,         0x04},  /* DRAM Refresh Rate Register, MCLK source*/
 415         {S1DREG_SDRAM_TC0,              0x12},  /* DRAM Timings Control Register 0*/
 416         {S1DREG_SDRAM_TC1,              0x02},  /* DRAM Timings Control Register 1*/
 417         {S1DREG_PANEL_TYPE,             0x25},  /* Panel Type Register*/
 418         {S1DREG_MOD_RATE,               0x00},  /* MOD Rate Register*/
 419         {S1DREG_LCD_DISP_HWIDTH,        0x4F},  /* LCD Horizontal Display Width Register*/
 420         {S1DREG_LCD_NDISP_HPER,         0x13},  /* LCD Horizontal Non-Display Period Register*/
 421         {S1DREG_TFT_FPLINE_START,       0x01},  /* TFT FPLINE Start Position Register*/
 422         {S1DREG_TFT_FPLINE_PWIDTH,      0x0c},  /* TFT FPLINE Pulse Width Register*/
 423         {S1DREG_LCD_DISP_VHEIGHT0,      0xDF},  /* LCD Vertical Display Height Register 0*/
 424         {S1DREG_LCD_DISP_VHEIGHT1,      0x01},  /* LCD Vertical Display Height Register 1*/
 425         {S1DREG_LCD_NDISP_VPER,         0x2c},  /* LCD Vertical Non-Display Period Register*/
 426         {S1DREG_TFT_FPFRAME_START,      0x0a},  /* TFT FPFRAME Start Position Register*/
 427         {S1DREG_TFT_FPFRAME_PWIDTH,     0x02},  /* TFT FPFRAME Pulse Width Register*/
 428         {S1DREG_LCD_DISP_MODE,          0x05},  /* LCD Display Mode Register*/
 429         {S1DREG_LCD_MISC,               0x01},  /* LCD Miscellaneous Register*/
 430         {S1DREG_LCD_DISP_START0,        0x00},  /* LCD Display Start Address Register 0*/
 431         {S1DREG_LCD_DISP_START1,        0x00},  /* LCD Display Start Address Register 1*/
 432         {S1DREG_LCD_DISP_START2,        0x00},  /* LCD Display Start Address Register 2*/
 433         {S1DREG_LCD_MEM_OFF0,           0x80},  /* LCD Memory Address Offset Register 0*/
 434         {S1DREG_LCD_MEM_OFF1,           0x02},  /* LCD Memory Address Offset Register 1*/
 435         {S1DREG_LCD_PIX_PAN,            0x03},  /* LCD Pixel Panning Register*/
 436         {S1DREG_LCD_DISP_FIFO_HTC,      0x00},  /* LCD Display FIFO High Threshold Control Register*/
 437         {S1DREG_LCD_DISP_FIFO_LTC,      0x00},  /* LCD Display FIFO Low Threshold Control Register*/
 438         {S1DREG_CRT_DISP_HWIDTH,        0x4F},  /* CRT/TV Horizontal Display Width Register*/
 439         {S1DREG_CRT_NDISP_HPER,         0x13},  /* CRT/TV Horizontal Non-Display Period Register*/
 440         {S1DREG_CRT_HRTC_START,         0x01},  /* CRT/TV HRTC Start Position Register*/
 441         {S1DREG_CRT_HRTC_PWIDTH,        0x0B},  /* CRT/TV HRTC Pulse Width Register*/
 442         {S1DREG_CRT_DISP_VHEIGHT0,      0xDF},  /* CRT/TV Vertical Display Height Register 0*/
 443         {S1DREG_CRT_DISP_VHEIGHT1,      0x01},  /* CRT/TV Vertical Display Height Register 1*/
 444         {S1DREG_CRT_NDISP_VPER,         0x2B},  /* CRT/TV Vertical Non-Display Period Register*/
 445         {S1DREG_CRT_VRTC_START,         0x09},  /* CRT/TV VRTC Start Position Register*/
 446         {S1DREG_CRT_VRTC_PWIDTH,        0x01},  /* CRT/TV VRTC Pulse Width Register*/
 447         {S1DREG_TV_OUT_CTL,             0x18},  /* TV Output Control Register */
 448         {S1DREG_CRT_DISP_MODE,          0x05},  /* CRT/TV Display Mode Register, 16BPP*/
 449         {S1DREG_CRT_DISP_START0,        0x00},  /* CRT/TV Display Start Address Register 0*/
 450         {S1DREG_CRT_DISP_START1,        0x00},  /* CRT/TV Display Start Address Register 1*/
 451         {S1DREG_CRT_DISP_START2,        0x00},  /* CRT/TV Display Start Address Register 2*/
 452         {S1DREG_CRT_MEM_OFF0,           0x80},  /* CRT/TV Memory Address Offset Register 0*/
 453         {S1DREG_CRT_MEM_OFF1,           0x02},  /* CRT/TV Memory Address Offset Register 1*/
 454         {S1DREG_CRT_PIX_PAN,            0x00},  /* CRT/TV Pixel Panning Register*/
 455         {S1DREG_CRT_DISP_FIFO_HTC,      0x00},  /* CRT/TV Display FIFO High Threshold Control Register*/
 456         {S1DREG_CRT_DISP_FIFO_LTC,      0x00},  /* CRT/TV Display FIFO Low Threshold Control Register*/
 457         {S1DREG_LCD_CUR_CTL,            0x00},  /* LCD Ink/Cursor Control Register*/
 458         {S1DREG_LCD_CUR_START,          0x01},  /* LCD Ink/Cursor Start Address Register*/
 459         {S1DREG_LCD_CUR_XPOS0,          0x00},  /* LCD Cursor X Position Register 0*/
 460         {S1DREG_LCD_CUR_XPOS1,          0x00},  /* LCD Cursor X Position Register 1*/
 461         {S1DREG_LCD_CUR_YPOS0,          0x00},  /* LCD Cursor Y Position Register 0*/
 462         {S1DREG_LCD_CUR_YPOS1,          0x00},  /* LCD Cursor Y Position Register 1*/
 463         {S1DREG_LCD_CUR_BCTL0,          0x00},  /* LCD Ink/Cursor Blue Color 0 Register*/
 464         {S1DREG_LCD_CUR_GCTL0,          0x00},  /* LCD Ink/Cursor Green Color 0 Register*/
 465         {S1DREG_LCD_CUR_RCTL0,          0x00},  /* LCD Ink/Cursor Red Color 0 Register*/
 466         {S1DREG_LCD_CUR_BCTL1,          0x1F},  /* LCD Ink/Cursor Blue Color 1 Register*/
 467         {S1DREG_LCD_CUR_GCTL1,          0x3F},  /* LCD Ink/Cursor Green Color 1 Register*/
 468         {S1DREG_LCD_CUR_RCTL1,          0x1F},  /* LCD Ink/Cursor Red Color 1 Register*/
 469         {S1DREG_LCD_CUR_FIFO_HTC,       0x00},  /* LCD Ink/Cursor FIFO Threshold Register*/
 470         {S1DREG_CRT_CUR_CTL,            0x00},  /* CRT/TV Ink/Cursor Control Register*/
 471         {S1DREG_CRT_CUR_START,          0x01},  /* CRT/TV Ink/Cursor Start Address Register*/
 472         {S1DREG_CRT_CUR_XPOS0,          0x00},  /* CRT/TV Cursor X Position Register 0*/
 473         {S1DREG_CRT_CUR_XPOS1,          0x00},  /* CRT/TV Cursor X Position Register 1*/
 474         {S1DREG_CRT_CUR_YPOS0,          0x00},  /* CRT/TV Cursor Y Position Register 0*/
 475         {S1DREG_CRT_CUR_YPOS1,          0x00},  /* CRT/TV Cursor Y Position Register 1*/
 476         {S1DREG_CRT_CUR_BCTL0,          0x00},  /* CRT/TV Ink/Cursor Blue Color 0 Register*/
 477         {S1DREG_CRT_CUR_GCTL0,          0x00},  /* CRT/TV Ink/Cursor Green Color 0 Register*/
 478         {S1DREG_CRT_CUR_RCTL0,          0x00},  /* CRT/TV Ink/Cursor Red Color 0 Register*/
 479         {S1DREG_CRT_CUR_BCTL1,          0x1F},  /* CRT/TV Ink/Cursor Blue Color 1 Register*/
 480         {S1DREG_CRT_CUR_GCTL1,          0x3F},  /* CRT/TV Ink/Cursor Green Color 1 Register*/
 481         {S1DREG_CRT_CUR_RCTL1,          0x1F},  /* CRT/TV Ink/Cursor Red Color 1 Register*/
 482         {S1DREG_CRT_CUR_FIFO_HTC,       0x00},  /* CRT/TV Ink/Cursor FIFO Threshold Register*/
 483         {S1DREG_BBLT_CTL0,              0x00},  /* BitBlt Control Register 0*/
 484         {S1DREG_BBLT_CTL1,              0x01},  /* BitBlt Control Register 1*/
 485         {S1DREG_BBLT_CC_EXP,            0x00},  /* BitBlt ROP Code/Color Expansion Register*/
 486         {S1DREG_BBLT_OP,                0x00},  /* BitBlt Operation Register*/
 487         {S1DREG_BBLT_SRC_START0,        0x00},  /* BitBlt Source Start Address Register 0*/
 488         {S1DREG_BBLT_SRC_START1,        0x00},  /* BitBlt Source Start Address Register 1*/
 489         {S1DREG_BBLT_SRC_START2,        0x00},  /* BitBlt Source Start Address Register 2*/
 490         {S1DREG_BBLT_DST_START0,        0x00},  /* BitBlt Destination Start Address Register 0*/
 491         {S1DREG_BBLT_DST_START1,        0x00},  /* BitBlt Destination Start Address Register 1*/
 492         {S1DREG_BBLT_DST_START2,        0x00},  /* BitBlt Destination Start Address Register 2*/
 493         {S1DREG_BBLT_MEM_OFF0,          0x00},  /* BitBlt Memory Address Offset Register 0*/
 494         {S1DREG_BBLT_MEM_OFF1,          0x00},  /* BitBlt Memory Address Offset Register 1*/
 495         {S1DREG_BBLT_WIDTH0,            0x00},  /* BitBlt Width Register 0*/
 496         {S1DREG_BBLT_WIDTH1,            0x00},  /* BitBlt Width Register 1*/
 497         {S1DREG_BBLT_HEIGHT0,           0x00},  /* BitBlt Height Register 0*/
 498         {S1DREG_BBLT_HEIGHT1,           0x00},  /* BitBlt Height Register 1*/
 499         {S1DREG_BBLT_BGC0,              0x00},  /* BitBlt Background Color Register 0*/
 500         {S1DREG_BBLT_BGC1,              0x00},  /* BitBlt Background Color Register 1*/
 501         {S1DREG_BBLT_FGC0,              0x00},  /* BitBlt Foreground Color Register 0*/
 502         {S1DREG_BBLT_FGC1,              0x00},  /* BitBlt Foreground Color Register 1*/
 503         {S1DREG_LKUP_MODE,              0x00},  /* Look-Up Table Mode Register*/
 504         {S1DREG_LKUP_ADDR,              0x00},  /* Look-Up Table Address Register*/
 505         {S1DREG_PS_CNF,                 0x00},  /* Power Save Configuration Register*/
 506         {S1DREG_PS_STATUS,              0x00},  /* Power Save Status Register*/
 507         {S1DREG_CPU2MEM_WDOGT,          0x00},  /* CPU-to-Memory Access Watchdog Timer Register*/
 508         {S1DREG_COM_DISP_MODE,          0x01},  /* Display Mode Register, LCD only*/
 509 };
 510
 511 static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
 512         .initregs               = yl9200_s1dfb_initregs,
 513         .initregssize           = ARRAY_SIZE(yl9200_s1dfb_initregs),
 514         .platform_init_video    = yl9200_init_video,
 515 };
 516
 517 #define YL9200_FB_REG_BASE      AT91_CHIPSELECT_7
 518 #define YL9200_FB_VMEM_BASE     YL9200_FB_REG_BASE + SZ_2M
 519 #define YL9200_FB_VMEM_SIZE     SZ_2M
 520
 521 static struct resource yl9200_s1dfb_resource[] = {
 522         [0] = { /* video mem */
 523                 .name   = "s1d13xxxfb memory",
 524                 .start  = YL9200_FB_VMEM_BASE,
 525                 .end    = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
 526                 .flags  = IORESOURCE_MEM,
 527         },
 528         [1] = { /* video registers */
 529                 .name   = "s1d13xxxfb registers",
 530                 .start  = YL9200_FB_REG_BASE,
 531                 .end    = YL9200_FB_REG_BASE + SZ_512 -1,
 532                 .flags  = IORESOURCE_MEM,
 533         },
 534 };
 535
 536 static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
 537
 538 static struct platform_device yl9200_s1dfb_device = {
 539         .name           = "s1d13806fb",
 540         .id             = -1,
 541         .dev    = {
 542                 .dma_mask               = &s1dfb_dmamask,
 543                 .coherent_dma_mask      = DMA_BIT_MASK(32),
 544                 .platform_data          = &yl9200_s1dfb_pdata,
 545         },
 546         .resource       = yl9200_s1dfb_resource,
 547         .num_resources  = ARRAY_SIZE(yl9200_s1dfb_resource),
 548 };
 549
 550 void __init yl9200_add_device_video(void)
 551 {
 552         platform_device_register(&yl9200_s1dfb_device);
 553 }
 554 #else
 555 void __init yl9200_add_device_video(void) {}
 556 #endif
 557
 558
 559 static void __init yl9200_board_init(void)
 560 {
 561         /* Serial */
 562         at91_add_device_serial();
 563         /* Ethernet */
 564         at91_add_device_eth(&yl9200_eth_data);
 565         /* USB Host */
 566         at91_add_device_usbh(&yl9200_usbh_data);
 567         /* USB Device */
 568         at91_add_device_udc(&yl9200_udc_data);
 569         /* I2C */
 570         at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
 571         /* MMC */
 572         at91_add_device_mmc(0, &yl9200_mmc_data);
 573         /* NAND */
 574         at91_add_device_nand(&yl9200_nand_data);
 575         /* NOR Flash */
 576         platform_device_register(&yl9200_flash);
 577 #if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
 578         /* SPI */
 579         at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
 580         /* Touchscreen */
 581         yl9200_add_device_ts();
 582 #endif
 583         /* LEDs. */
 584         at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
 585         /* Push Buttons */
 586         yl9200_add_device_buttons();
 587         /* VGA */
 588         yl9200_add_device_video();
 589 }
 590
 591 MACHINE_START(YL9200, "uCdragon YL-9200")
 592         /* Maintainer: S.Birtles */
 593         .timer          = &at91rm9200_timer,
 594         .map_io         = at91_map_io,
 595         .init_early     = yl9200_init_early,
 596         .init_irq       = at91_init_irq_default,
 597         .init_machine   = yl9200_board_init,
 598 MACHINE_END