arch/arm/mach-pxa/idp.c

   1 /*
   2  *  linux/arch/arm/mach-pxa/idp.c
   3  *
   4  *  This program is free software; you can redistribute it and/or modify
   5  *  it under the terms of the GNU General Public License version 2 as
   6  *  published by the Free Software Foundation.
   7  *
   8  *  Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
   9  *
  10  *  2001-09-13: Cliff Brake <cbrake@accelent.com>
  11  *              Initial code
  12  *
  13  *  2005-02-15: Cliff Brake <cliff.brake@gmail.com>
  14  *              <http://www.vibren.com> <http://bec-systems.com>
  15  *              Updated for 2.6 kernel
  16  *
  17  */
  18
  19 #include <linux/init.h>
  20 #include <linux/interrupt.h>
  21 #include <linux/irq.h>
  22 #include <linux/platform_device.h>
  23 #include <linux/fb.h>
  24
  25 #include <asm/setup.h>
  26 #include <asm/memory.h>
  27 #include <asm/mach-types.h>
  28 #include <mach/hardware.h>
  29 #include <asm/irq.h>
  30
  31 #include <asm/mach/arch.h>
  32 #include <asm/mach/map.h>
  33
  34 #include <mach/pxa25x.h>
  35 #include <mach/idp.h>
  36 #include <mach/pxafb.h>
  37 #include <mach/bitfield.h>
  38 #include <mach/mmc.h>
  39
  40 #include "generic.h"
  41 #include "devices.h"
  42
  43 /* TODO:
  44  * - add pxa2xx_audio_ops_t device structure
  45  * - Ethernet interrupt
  46  */
  47
  48 static unsigned long idp_pin_config[] __initdata = {
  49         /* LCD */
  50         GPIOxx_LCD_DSTN_16BPP,
  51
  52         /* BTUART */
  53         GPIO42_BTUART_RXD,
  54         GPIO43_BTUART_TXD,
  55         GPIO44_BTUART_CTS,
  56         GPIO45_BTUART_RTS,
  57
  58         /* STUART */
  59         GPIO46_STUART_RXD,
  60         GPIO47_STUART_TXD,
  61
  62         /* MMC */
  63         GPIO6_MMC_CLK,
  64         GPIO8_MMC_CS0,
  65
  66         /* Ethernet */
  67         GPIO33_nCS_5,   /* Ethernet CS */
  68         GPIO4_GPIO,     /* Ethernet IRQ */
  69 };
  70
  71 static struct resource smc91x_resources[] = {
  72         [0] = {
  73                 .start  = (IDP_ETH_PHYS + 0x300),
  74                 .end    = (IDP_ETH_PHYS + 0xfffff),
  75                 .flags  = IORESOURCE_MEM,
  76         },
  77         [1] = {
  78                 .start  = PXA_GPIO_TO_IRQ(4),
  79                 .end    = PXA_GPIO_TO_IRQ(4),
  80                 .flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
  81         }
  82 };
  83
  84 static struct platform_device smc91x_device = {
  85         .name           = "smc91x",
  86         .id             = 0,
  87         .num_resources  = ARRAY_SIZE(smc91x_resources),
  88         .resource       = smc91x_resources,
  89 };
  90
  91 static void idp_backlight_power(int on)
  92 {
  93         if (on) {
  94                 IDP_CPLD_LCD |= (1<<1);
  95         } else {
  96                 IDP_CPLD_LCD &= ~(1<<1);
  97         }
  98 }
  99
 100 static void idp_vlcd(int on)
 101 {
 102         if (on) {
 103                 IDP_CPLD_LCD |= (1<<2);
 104         } else {
 105                 IDP_CPLD_LCD &= ~(1<<2);
 106         }
 107 }
 108
 109 static void idp_lcd_power(int on, struct fb_var_screeninfo *var)
 110 {
 111         if (on) {
 112                 IDP_CPLD_LCD |= (1<<0);
 113         } else {
 114                 IDP_CPLD_LCD &= ~(1<<0);
 115         }
 116
 117         /* call idp_vlcd for now as core driver does not support
 118          * both power and vlcd hooks.  Note, this is not technically
 119          * the correct sequence, but seems to work.  Disclaimer:
 120          * this may eventually damage the display.
 121          */
 122
 123         idp_vlcd(on);
 124 }
 125
 126 static struct pxafb_mode_info sharp_lm8v31_mode = {
 127         .pixclock       = 270000,
 128         .xres           = 640,
 129         .yres           = 480,
 130         .bpp            = 16,
 131         .hsync_len      = 1,
 132         .left_margin    = 3,
 133         .right_margin   = 3,
 134         .vsync_len      = 1,
 135         .upper_margin   = 0,
 136         .lower_margin   = 0,
 137         .sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 138         .cmap_greyscale = 0,
 139 };
 140
 141 static struct pxafb_mach_info sharp_lm8v31 = {
 142         .modes          = &sharp_lm8v31_mode,
 143         .num_modes      = 1,
 144         .cmap_inverse   = 0,
 145         .cmap_static    = 0,
 146         .lcd_conn       = LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
 147                           LCD_AC_BIAS_FREQ(255),
 148         .pxafb_backlight_power = &idp_backlight_power,
 149         .pxafb_lcd_power = &idp_lcd_power
 150 };
 151
 152 static struct pxamci_platform_data idp_mci_platform_data = {
 153         .ocr_mask               = MMC_VDD_32_33|MMC_VDD_33_34,
 154         .gpio_card_detect       = -1,
 155         .gpio_card_ro           = -1,
 156         .gpio_power             = -1,
 157 };
 158
 159 static void __init idp_init(void)
 160 {
 161         printk("idp_init()\n");
 162
 163         pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
 164         pxa_set_ffuart_info(NULL);
 165         pxa_set_btuart_info(NULL);
 166         pxa_set_stuart_info(NULL);
 167
 168         platform_device_register(&smc91x_device);
 169         //platform_device_register(&mst_audio_device);
 170         pxa_set_fb_info(NULL, &sharp_lm8v31);
 171         pxa_set_mci_info(&idp_mci_platform_data);
 172 }
 173
 174 static struct map_desc idp_io_desc[] __initdata = {
 175         {
 176                 .virtual        =  IDP_COREVOLT_VIRT,
 177                 .pfn            = __phys_to_pfn(IDP_COREVOLT_PHYS),
 178                 .length         = IDP_COREVOLT_SIZE,
 179                 .type           = MT_DEVICE
 180         }, {
 181                 .virtual        =  IDP_CPLD_VIRT,
 182                 .pfn            = __phys_to_pfn(IDP_CPLD_PHYS),
 183                 .length         = IDP_CPLD_SIZE,
 184                 .type           = MT_DEVICE
 185         }
 186 };
 187
 188 static void __init idp_map_io(void)
 189 {
 190         pxa25x_map_io();
 191         iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
 192 }
 193
 194
 195 MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 196         /* Maintainer: Vibren Technologies */
 197         .map_io         = idp_map_io,
 198         .init_irq       = pxa25x_init_irq,
 199         .handle_irq     = pxa25x_handle_irq,
 200         .timer          = &pxa_timer,
 201         .init_machine   = idp_init,
 202         .restart        = pxa_restart,
 203 MACHINE_END