1 /* linux/arch/arm/mach-s3c2440/mach-at2440evb.c
3 * Copyright (c) 2008 Ramax Lo <ramaxlo@gmail.com>
4 * Based on mach-anubis.c by Ben Dooks <ben@simtec.co.uk>
5 * and modifications by SBZ <sbz@spgui.org> and
6 * Weibing <http://weibing.blogbus.com>
8 * For product information, visit http://www.arm.com/
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #include <linux/kernel.h>
16 #include <linux/types.h>
17 #include <linux/interrupt.h>
18 #include <linux/list.h>
19 #include <linux/timer.h>
20 #include <linux/init.h>
22 #include <linux/serial_core.h>
23 #include <linux/dm9000.h>
24 #include <linux/platform_device.h>
26 #include <asm/mach/arch.h>
27 #include <asm/mach/map.h>
28 #include <asm/mach/irq.h>
30 #include <mach/hardware.h>
33 #include <asm/mach-types.h>
35 #include <plat/regs-serial.h>
36 #include <mach/regs-gpio.h>
37 #include <mach/regs-mem.h>
38 #include <mach/regs-lcd.h>
39 #include <plat/nand.h>
42 #include <linux/mtd/mtd.h>
43 #include <linux/mtd/nand.h>
44 #include <linux/mtd/nand_ecc.h>
45 #include <linux/mtd/partitions.h>
47 #include <plat/clock.h>
48 #include <plat/devs.h>
54 static struct map_desc at2440evb_iodesc
[] __initdata
= {
58 #define UCON S3C2410_UCON_DEFAULT
59 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE)
60 #define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
62 static struct s3c2410_uartcfg at2440evb_uartcfgs
[] __initdata
= {
69 .clk_sel
= S3C2410_UCON_CLKSEL1
| S3C2410_UCON_CLKSEL2
,
77 .clk_sel
= S3C2410_UCON_CLKSEL1
| S3C2410_UCON_CLKSEL2
,
81 /* NAND Flash on AT2440EVB board */
83 static struct mtd_partition __initdata at2440evb_default_nand_part
[] = {
96 .offset
= SZ_256K
+ SZ_2M
,
97 .size
= MTDPART_SIZ_FULL
,
101 static struct s3c2410_nand_set __initdata at2440evb_nand_sets
[] = {
105 .nr_partitions
= ARRAY_SIZE(at2440evb_default_nand_part
),
106 .partitions
= at2440evb_default_nand_part
,
110 static struct s3c2410_platform_nand __initdata at2440evb_nand_info
= {
114 .nr_sets
= ARRAY_SIZE(at2440evb_nand_sets
),
115 .sets
= at2440evb_nand_sets
,
118 /* DM9000AEP 10/100 ethernet controller */
120 static struct resource at2440evb_dm9k_resource
[] = {
122 .start
= S3C2410_CS3
,
123 .end
= S3C2410_CS3
+ 3,
124 .flags
= IORESOURCE_MEM
127 .start
= S3C2410_CS3
+ 4,
128 .end
= S3C2410_CS3
+ 7,
129 .flags
= IORESOURCE_MEM
134 .flags
= IORESOURCE_IRQ
| IORESOURCE_IRQ_HIGHEDGE
,
138 static struct dm9000_plat_data at2440evb_dm9k_pdata
= {
139 .flags
= (DM9000_PLATF_16BITONLY
| DM9000_PLATF_NO_EEPROM
),
142 static struct platform_device at2440evb_device_eth
= {
145 .num_resources
= ARRAY_SIZE(at2440evb_dm9k_resource
),
146 .resource
= at2440evb_dm9k_resource
,
148 .platform_data
= &at2440evb_dm9k_pdata
,
152 static struct s3c24xx_mci_pdata at2440evb_mci_pdata __initdata
= {
153 .gpio_detect
= S3C2410_GPG(10),
158 static struct s3c2410fb_display at2440evb_lcd_cfg __initdata
= {
160 .lcdcon5
= S3C2410_LCDCON5_FRM565
|
161 S3C2410_LCDCON5_INVVLINE
|
162 S3C2410_LCDCON5_INVVFRAME
|
163 S3C2410_LCDCON5_PWREN
|
164 S3C2410_LCDCON5_HWSWP
,
166 .type
= S3C2410_LCDCON1_TFT
,
171 .pixclock
= 33333, /* HCLK 60 MHz, divisor 2 */
183 static struct s3c2410fb_mach_info at2440evb_fb_info __initdata
= {
184 .displays
= &at2440evb_lcd_cfg
,
186 .default_display
= 0,
189 static struct platform_device
*at2440evb_devices
[] __initdata
= {
198 &at2440evb_device_eth
,
201 static void __init
at2440evb_map_io(void)
203 s3c24xx_init_io(at2440evb_iodesc
, ARRAY_SIZE(at2440evb_iodesc
));
204 s3c24xx_init_clocks(16934400);
205 s3c24xx_init_uarts(at2440evb_uartcfgs
, ARRAY_SIZE(at2440evb_uartcfgs
));
208 static void __init
at2440evb_init(void)
210 s3c24xx_fb_set_platdata(&at2440evb_fb_info
);
211 s3c24xx_mci_set_platdata(&at2440evb_mci_pdata
);
212 s3c_nand_set_platdata(&at2440evb_nand_info
);
213 s3c_i2c0_set_platdata(NULL
);
215 platform_add_devices(at2440evb_devices
, ARRAY_SIZE(at2440evb_devices
));
219 MACHINE_START(AT2440EVB
, "AT2440EVB")
220 .atag_offset
= 0x100,
221 .map_io
= at2440evb_map_io
,
222 .init_machine
= at2440evb_init
,
223 .init_irq
= s3c24xx_init_irq
,
224 .timer
= &s3c24xx_timer
,
225 .restart
= s3c244x_restart
,