Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / arch / mips / sibyte / sb1250 / smp.c
blob38e7f6bd7922edd6c25e2169515cdccacfc81ea7
1 /*
2 * Copyright (C) 2001, 2002, 2003 Broadcom Corporation
4 * This program is free software; you can redistribute it and/or
5 * modify it under the terms of the GNU General Public License
6 * as published by the Free Software Foundation; either version 2
7 * of the License, or (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
19 #include <linux/init.h>
20 #include <linux/delay.h>
21 #include <linux/interrupt.h>
22 #include <linux/smp.h>
23 #include <linux/kernel_stat.h>
24 #include <linux/sched.h>
26 #include <asm/mmu_context.h>
27 #include <asm/io.h>
28 #include <asm/fw/cfe/cfe_api.h>
29 #include <asm/sibyte/sb1250.h>
30 #include <asm/sibyte/sb1250_regs.h>
31 #include <asm/sibyte/sb1250_int.h>
33 static void *mailbox_set_regs[] = {
34 IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_SET_CPU),
35 IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_SET_CPU)
38 static void *mailbox_clear_regs[] = {
39 IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CLR_CPU),
40 IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CLR_CPU)
43 static void *mailbox_regs[] = {
44 IOADDR(A_IMR_CPU0_BASE + R_IMR_MAILBOX_CPU),
45 IOADDR(A_IMR_CPU1_BASE + R_IMR_MAILBOX_CPU)
49 * SMP init and finish on secondary CPUs
51 void __cpuinit sb1250_smp_init(void)
53 unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
54 STATUSF_IP1 | STATUSF_IP0;
56 /* Set interrupt mask, but don't enable */
57 change_c0_status(ST0_IM, imask);
61 * These are routines for dealing with the sb1250 smp capabilities
62 * independent of board/firmware
66 * Simple enough; everything is set up, so just poke the appropriate mailbox
67 * register, and we should be set
69 static void sb1250_send_ipi_single(int cpu, unsigned int action)
71 __raw_writeq((((u64)action) << 48), mailbox_set_regs[cpu]);
74 static inline void sb1250_send_ipi_mask(const struct cpumask *mask,
75 unsigned int action)
77 unsigned int i;
79 for_each_cpu(i, mask)
80 sb1250_send_ipi_single(i, action);
84 * Code to run on secondary just after probing the CPU
86 static void __cpuinit sb1250_init_secondary(void)
88 extern void sb1250_smp_init(void);
90 sb1250_smp_init();
94 * Do any tidying up before marking online and running the idle
95 * loop
97 static void __cpuinit sb1250_smp_finish(void)
99 extern void sb1250_clockevent_init(void);
101 sb1250_clockevent_init();
102 local_irq_enable();
106 * Final cleanup after all secondaries booted
108 static void sb1250_cpus_done(void)
113 * Setup the PC, SP, and GP of a secondary processor and start it
114 * running!
116 static void __cpuinit sb1250_boot_secondary(int cpu, struct task_struct *idle)
118 int retval;
120 retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
121 __KSTK_TOS(idle),
122 (unsigned long)task_thread_info(idle), 0);
123 if (retval != 0)
124 printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
128 * Use CFE to find out how many CPUs are available, setting up
129 * cpu_possible_map and the logical/physical mappings.
130 * XXXKW will the boot CPU ever not be physical 0?
132 * Common setup before any secondaries are started
134 static void __init sb1250_smp_setup(void)
136 int i, num;
138 cpus_clear(cpu_possible_map);
139 cpu_set(0, cpu_possible_map);
140 __cpu_number_map[0] = 0;
141 __cpu_logical_map[0] = 0;
143 for (i = 1, num = 0; i < NR_CPUS; i++) {
144 if (cfe_cpu_stop(i) == 0) {
145 cpu_set(i, cpu_possible_map);
146 __cpu_number_map[i] = ++num;
147 __cpu_logical_map[num] = i;
150 printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
153 static void __init sb1250_prepare_cpus(unsigned int max_cpus)
157 struct plat_smp_ops sb_smp_ops = {
158 .send_ipi_single = sb1250_send_ipi_single,
159 .send_ipi_mask = sb1250_send_ipi_mask,
160 .init_secondary = sb1250_init_secondary,
161 .smp_finish = sb1250_smp_finish,
162 .cpus_done = sb1250_cpus_done,
163 .boot_secondary = sb1250_boot_secondary,
164 .smp_setup = sb1250_smp_setup,
165 .prepare_cpus = sb1250_prepare_cpus,
168 void sb1250_mailbox_interrupt(void)
170 int cpu = smp_processor_id();
171 int irq = K_INT_MBOX_0;
172 unsigned int action;
174 kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq));
175 /* Load the mailbox register to figure out what we're supposed to do */
176 action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff;
178 /* Clear the mailbox to clear the interrupt */
179 ____raw_writeq(((u64)action) << 48, mailbox_clear_regs[cpu]);
181 if (action & SMP_RESCHEDULE_YOURSELF)
182 scheduler_ipi();
184 if (action & SMP_CALL_FUNCTION)
185 smp_call_function_interrupt();