Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / arch / powerpc / boot / dts / fsl / mpc8536si-post.dtsi
blobb37da56018b6340a6d514a85644d5131960de9ff
1 /*
2  * MPC8536 Silicon/SoC Device Tree Source (post include)
3  *
4  * Copyright 2011 Freescale Semiconductor Inc.
5  *
6  * Redistribution and use in source and binary forms, with or without
7  * modification, are permitted provided that the following conditions are met:
8  *     * Redistributions of source code must retain the above copyright
9  *       notice, this list of conditions and the following disclaimer.
10  *     * Redistributions in binary form must reproduce the above copyright
11  *       notice, this list of conditions and the following disclaimer in the
12  *       documentation and/or other materials provided with the distribution.
13  *     * Neither the name of Freescale Semiconductor nor the
14  *       names of its contributors may be used to endorse or promote products
15  *       derived from this software without specific prior written permission.
16  *
17  *
18  * ALTERNATIVELY, this software may be distributed under the terms of the
19  * GNU General Public License ("GPL") as published by the Free Software
20  * Foundation, either version 2 of that License or (at your option) any
21  * later version.
22  *
23  * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24  * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25  * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26  * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29  * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33  */
35 &lbc {
36         #address-cells = <2>;
37         #size-cells = <1>;
38         compatible = "fsl,mpc8536-elbc", "fsl,elbc", "simple-bus";
39         interrupts = <19 2 0 0>;
42 /* controller at 0x8000 */
43 &pci0 {
44         compatible = "fsl,mpc8540-pci";
45         device_type = "pci";
46         interrupts = <24 0x2 0 0>;
47         bus-range = <0 0xff>;
48         #interrupt-cells = <1>;
49         #size-cells = <2>;
50         #address-cells = <3>;
53 /* controller at 0x9000 */
54 &pci1 {
55         compatible = "fsl,mpc8548-pcie";
56         device_type = "pci";
57         #size-cells = <2>;
58         #address-cells = <3>;
59         bus-range = <0 255>;
60         clock-frequency = <33333333>;
61         interrupts = <25 2 0 0>;
63         pcie@0 {
64                 reg = <0 0 0 0 0>;
65                 #interrupt-cells = <1>;
66                 #size-cells = <2>;
67                 #address-cells = <3>;
68                 device_type = "pci";
69                 interrupts = <25 2 0 0>;
70                 interrupt-map-mask = <0xf800 0 0 7>;
72                 interrupt-map = <
73                         /* IDSEL 0x0 */
74                         0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
75                         0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
76                         0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
77                         0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
78                         >;
79         };
82 /* controller at 0xa000 */
83 &pci2 {
84         compatible = "fsl,mpc8548-pcie";
85         device_type = "pci";
86         #size-cells = <2>;
87         #address-cells = <3>;
88         bus-range = <0 255>;
89         clock-frequency = <33333333>;
90         interrupts = <26 2 0 0>;
92         pcie@0 {
93                 reg = <0 0 0 0 0>;
94                 #interrupt-cells = <1>;
95                 #size-cells = <2>;
96                 #address-cells = <3>;
97                 device_type = "pci";
98                 interrupts = <26 2 0 0>;
99                 interrupt-map-mask = <0xf800 0 0 7>;
100                 interrupt-map = <
101                         /* IDSEL 0x0 */
102                         0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
103                         0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
104                         0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
105                         0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
106                         >;
107         };
110 /* controller at 0xb000 */
111 &pci3 {
112         compatible = "fsl,mpc8548-pcie";
113         device_type = "pci";
114         #size-cells = <2>;
115         #address-cells = <3>;
116         bus-range = <0 255>;
117         clock-frequency = <33333333>;
118         interrupts = <27 2 0 0>;
120         pcie@0 {
121                 reg = <0 0 0 0 0>;
122                 #interrupt-cells = <1>;
123                 #size-cells = <2>;
124                 #address-cells = <3>;
125                 device_type = "pci";
126                 interrupts = <27 2 0 0>;
127                 interrupt-map-mask = <0xf800 0 0 7>;
128                 interrupt-map = <
129                         /* IDSEL 0x0 */
130                         0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
131                         0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
132                         0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
133                         0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
134                         >;
135         };
137 &soc {
138         #address-cells = <1>;
139         #size-cells = <1>;
140         device_type = "soc";
141         compatible = "fsl,mpc8536-immr", "simple-bus";
142         bus-frequency = <0>;            // Filled out by uboot.
144         ecm-law@0 {
145                 compatible = "fsl,ecm-law";
146                 reg = <0x0 0x1000>;
147                 fsl,num-laws = <12>;
148         };
150         ecm@1000 {
151                 compatible = "fsl,mpc8536-ecm", "fsl,ecm";
152                 reg = <0x1000 0x1000>;
153                 interrupts = <17 2 0 0>;
154         };
156         memory-controller@2000 {
157                 compatible = "fsl,mpc8536-memory-controller";
158                 reg = <0x2000 0x1000>;
159                 interrupts = <18 2 0 0>;
160         };
162 /include/ "pq3-i2c-0.dtsi"
163 /include/ "pq3-i2c-1.dtsi"
164 /include/ "pq3-duart-0.dtsi"
166 /include/ "pq3-espi-0.dtsi"
167         spi@7000 {
168                 fsl,espi-num-chipselects = <4>;
169         };
171 /include/ "pq3-gpio-0.dtsi"
173         /* mark compat w/8572 to get some erratum treatment */
174         gpio-controller@f000 {
175                 compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
176         };
178         sata@18000 {
179                 compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
180                 reg = <0x18000 0x1000>;
181                 cell-index = <1>;
182                 interrupts = <74 0x2 0 0>;
183         };
185         sata@19000 {
186                 compatible = "fsl,mpc8536-sata", "fsl,pq-sata";
187                 reg = <0x19000 0x1000>;
188                 cell-index = <2>;
189                 interrupts = <41 0x2 0 0>;
190         };
192         L2: l2-cache-controller@20000 {
193                 compatible = "fsl,mpc8536-l2-cache-controller";
194                 reg = <0x20000 0x1000>;
195                 cache-line-size = <32>; // 32 bytes
196                 cache-size = <0x80000>; // L2, 512K
197                 interrupts = <16 2 0 0>;
198         };
200 /include/ "pq3-dma-0.dtsi"
201 /include/ "pq3-etsec1-0.dtsi"
202 /include/ "pq3-etsec1-timer-0.dtsi"
204         usb@22000 {
205                 compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
206                 reg = <0x22000 0x1000>;
207                 #address-cells = <1>;
208                 #size-cells = <0>;
209                 interrupts = <28 0x2 0 0>;
210         };
212         usb@23000 {
213                 compatible = "fsl,mpc8536-usb2-mph", "fsl-usb2-mph";
214                 reg = <0x23000 0x1000>;
215                 #address-cells = <1>;
216                 #size-cells = <0>;
217                 interrupts = <46 0x2 0 0>;
218         };
220         ptp_clock@24e00 {
221                 interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
222         };
224 /include/ "pq3-etsec1-2.dtsi"
226         ethernet@26000 {
227                 cell-index = <1>;
228         };
230         usb@2b000 {
231                 compatible = "fsl,mpc8536-usb2-dr", "fsl-usb2-dr";
232                 reg = <0x2b000 0x1000>;
233                 #address-cells = <1>;
234                 #size-cells = <0>;
235                 interrupts = <60 0x2 0 0>;
236         };
238 /include/ "pq3-esdhc-0.dtsi"
239         sdhc@2e000 {
240                 compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
241         };
243 /include/ "pq3-sec3.0-0.dtsi"
244 /include/ "pq3-mpic.dtsi"
245 /include/ "pq3-mpic-timer-B.dtsi"
247         global-utilities@e0000 {
248                 compatible = "fsl,mpc8536-guts";
249                 reg = <0xe0000 0x1000>;
250                 fsl,has-rstcr;
251         };