| blob | ff7b15b340a337dee3432cf269e2975cd4fcac8d |
1 /*
2 * MPC832x RDB Device Tree Source
3 *
4 * Copyright 2007 Freescale Semiconductor Inc.
5 *
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the
8 * Free Software Foundation; either version 2 of the License, or (at your
9 * option) any later version.
10 */
12 /dts-v1/;
14 / {
15 model = "MPC8323ERDB";
16 compatible = "MPC8323ERDB", "MPC832xRDB", "MPC83xxRDB";
17 #address-cells = <1>;
18 #size-cells = <1>;
20 aliases {
21 ethernet0 = &enet1;
22 ethernet1 = &enet0;
23 serial0 = &serial0;
24 serial1 = &serial1;
25 pci0 = &pci0;
26 };
28 cpus {
29 #address-cells = <1>;
30 #size-cells = <0>;
32 PowerPC,8323@0 {
33 device_type = "cpu";
34 reg = <0x0>;
35 d-cache-line-size = <0x20>; // 32 bytes
36 i-cache-line-size = <0x20>; // 32 bytes
37 d-cache-size = <16384>; // L1, 16K
38 i-cache-size = <16384>; // L1, 16K
39 timebase-frequency = <0>;
40 bus-frequency = <0>;
41 clock-frequency = <0>;
42 };
43 };
45 memory {
46 device_type = "memory";
47 reg = <0x00000000 0x04000000>;
48 };
50 soc8323@e0000000 {
51 #address-cells = <1>;
52 #size-cells = <1>;
53 device_type = "soc";
54 compatible = "simple-bus";
55 ranges = <0x0 0xe0000000 0x00100000>;
56 reg = <0xe0000000 0x00000200>;
57 bus-frequency = <0>;
59 wdt@200 {
60 device_type = "watchdog";
61 compatible = "mpc83xx_wdt";
62 reg = <0x200 0x100>;
63 };
65 pmc: power@b00 {
66 compatible = "fsl,mpc8323-pmc", "fsl,mpc8349-pmc";
67 reg = <0xb00 0x100 0xa00 0x100>;
68 interrupts = <80 0x8>;
69 interrupt-parent = <&ipic>;
70 };
72 i2c@3000 {
73 #address-cells = <1>;
74 #size-cells = <0>;
75 cell-index = <0>;
76 compatible = "fsl-i2c";
77 reg = <0x3000 0x100>;
78 interrupts = <14 0x8>;
79 interrupt-parent = <&ipic>;
80 dfsrr;
81 };
83 serial0: serial@4500 {
84 cell-index = <0>;
85 device_type = "serial";
86 compatible = "fsl,ns16550", "ns16550";
87 reg = <0x4500 0x100>;
88 clock-frequency = <0>;
89 interrupts = <9 0x8>;
90 interrupt-parent = <&ipic>;
91 };
93 serial1: serial@4600 {
94 cell-index = <1>;
95 device_type = "serial";
96 compatible = "fsl,ns16550", "ns16550";
97 reg = <0x4600 0x100>;
98 clock-frequency = <0>;
99 interrupts = <10 0x8>;
100 interrupt-parent = <&ipic>;
101 };
103 dma@82a8 {
104 #address-cells = <1>;
105 #size-cells = <1>;
106 compatible = "fsl,mpc8323-dma", "fsl,elo-dma";
107 reg = <0x82a8 4>;
108 ranges = <0 0x8100 0x1a8>;
109 interrupt-parent = <&ipic>;
110 interrupts = <71 8>;
111 cell-index = <0>;
112 dma-channel@0 {
113 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
114 reg = <0 0x80>;
115 cell-index = <0>;
116 interrupt-parent = <&ipic>;
117 interrupts = <71 8>;
118 };
119 dma-channel@80 {
120 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
121 reg = <0x80 0x80>;
122 cell-index = <1>;
123 interrupt-parent = <&ipic>;
124 interrupts = <71 8>;
125 };
126 dma-channel@100 {
127 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
128 reg = <0x100 0x80>;
129 cell-index = <2>;
130 interrupt-parent = <&ipic>;
131 interrupts = <71 8>;
132 };
133 dma-channel@180 {
134 compatible = "fsl,mpc8323-dma-channel", "fsl,elo-dma-channel";
135 reg = <0x180 0x28>;
136 cell-index = <3>;
137 interrupt-parent = <&ipic>;
138 interrupts = <71 8>;
139 };
140 };
142 crypto@30000 {
143 compatible = "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
144 reg = <0x30000 0x10000>;
145 interrupts = <11 0x8>;
146 interrupt-parent = <&ipic>;
147 fsl,num-channels = <1>;
148 fsl,channel-fifo-len = <24>;
149 fsl,exec-units-mask = <0x4c>;
150 fsl,descriptor-types-mask = <0x0122003f>;
151 sleep = <&pmc 0x03000000>;
152 };
154 ipic:pic@700 {
155 interrupt-controller;
156 #address-cells = <0>;
157 #interrupt-cells = <2>;
158 reg = <0x700 0x100>;
159 device_type = "ipic";
160 };
162 par_io@1400 {
163 #address-cells = <1>;
164 #size-cells = <1>;
165 reg = <0x1400 0x100>;
166 ranges = <3 0x1448 0x18>;
167 compatible = "fsl,mpc8323-qe-pario";
168 device_type = "par_io";
169 num-ports = <7>;
171 qe_pio_d: gpio-controller@1448 {
172 #gpio-cells = <2>;
173 compatible = "fsl,mpc8323-qe-pario-bank";
174 reg = <3 0x18>;
175 gpio-controller;
176 };
178 ucc2pio:ucc_pin@02 {
179 pio-map = <
180 /* port pin dir open_drain assignment has_irq */
181 3 4 3 0 2 0 /* MDIO */
182 3 5 1 0 2 0 /* MDC */
183 3 21 2 0 1 0 /* RX_CLK (CLK16) */
184 3 23 2 0 1 0 /* TX_CLK (CLK3) */
185 0 18 1 0 1 0 /* TxD0 */
186 0 19 1 0 1 0 /* TxD1 */
187 0 20 1 0 1 0 /* TxD2 */
188 0 21 1 0 1 0 /* TxD3 */
189 0 22 2 0 1 0 /* RxD0 */
190 0 23 2 0 1 0 /* RxD1 */
191 0 24 2 0 1 0 /* RxD2 */
192 0 25 2 0 1 0 /* RxD3 */
193 0 26 2 0 1 0 /* RX_ER */
194 0 27 1 0 1 0 /* TX_ER */
195 0 28 2 0 1 0 /* RX_DV */
196 0 29 2 0 1 0 /* COL */
197 0 30 1 0 1 0 /* TX_EN */
198 0 31 2 0 1 0>; /* CRS */
199 };
200 ucc3pio:ucc_pin@03 {
201 pio-map = <
202 /* port pin dir open_drain assignment has_irq */
203 0 13 2 0 1 0 /* RX_CLK (CLK9) */
204 3 24 2 0 1 0 /* TX_CLK (CLK10) */
205 1 0 1 0 1 0 /* TxD0 */
206 1 1 1 0 1 0 /* TxD1 */
207 1 2 1 0 1 0 /* TxD2 */
208 1 3 1 0 1 0 /* TxD3 */
209 1 4 2 0 1 0 /* RxD0 */
210 1 5 2 0 1 0 /* RxD1 */
211 1 6 2 0 1 0 /* RxD2 */
212 1 7 2 0 1 0 /* RxD3 */
213 1 8 2 0 1 0 /* RX_ER */
214 1 9 1 0 1 0 /* TX_ER */
215 1 10 2 0 1 0 /* RX_DV */
216 1 11 2 0 1 0 /* COL */
217 1 12 1 0 1 0 /* TX_EN */
218 1 13 2 0 1 0>; /* CRS */
219 };
220 };
221 };
223 qe@e0100000 {
224 #address-cells = <1>;
225 #size-cells = <1>;
226 device_type = "qe";
227 compatible = "fsl,qe";
228 ranges = <0x0 0xe0100000 0x00100000>;
229 reg = <0xe0100000 0x480>;
230 brg-frequency = <0>;
231 bus-frequency = <198000000>;
232 fsl,qe-num-riscs = <1>;
233 fsl,qe-num-snums = <28>;
235 muram@10000 {
236 #address-cells = <1>;
237 #size-cells = <1>;
238 compatible = "fsl,qe-muram", "fsl,cpm-muram";
239 ranges = <0x0 0x00010000 0x00004000>;
241 data-only@0 {
242 compatible = "fsl,qe-muram-data",
243 "fsl,cpm-muram-data";
244 reg = <0x0 0x4000>;
245 };
246 };
248 spi@4c0 {
249 #address-cells = <1>;
250 #size-cells = <0>;
251 cell-index = <0>;
252 compatible = "fsl,spi";
253 reg = <0x4c0 0x40>;
254 interrupts = <2>;
255 interrupt-parent = <&qeic>;
256 gpios = <&qe_pio_d 13 0>;
257 mode = "cpu-qe";
259 mmc-slot@0 {
260 compatible = "fsl,mpc8323rdb-mmc-slot",
261 "mmc-spi-slot";
262 reg = <0>;
263 gpios = <&qe_pio_d 14 1
264 &qe_pio_d 15 0>;
265 voltage-ranges = <3300 3300>;
266 spi-max-frequency = <50000000>;
267 };
268 };
270 spi@500 {
271 cell-index = <1>;
272 compatible = "fsl,spi";
273 reg = <0x500 0x40>;
274 interrupts = <1>;
275 interrupt-parent = <&qeic>;
276 mode = "cpu";
277 };
279 enet0: ucc@3000 {
280 device_type = "network";
281 compatible = "ucc_geth";
282 cell-index = <2>;
283 reg = <0x3000 0x200>;
284 interrupts = <33>;
285 interrupt-parent = <&qeic>;
286 local-mac-address = [ 00 00 00 00 00 00 ];
287 rx-clock-name = "clk16";
288 tx-clock-name = "clk3";
289 phy-handle = <&phy00>;
290 pio-handle = <&ucc2pio>;
291 };
293 enet1: ucc@2200 {
294 device_type = "network";
295 compatible = "ucc_geth";
296 cell-index = <3>;
297 reg = <0x2200 0x200>;
298 interrupts = <34>;
299 interrupt-parent = <&qeic>;
300 local-mac-address = [ 00 00 00 00 00 00 ];
301 rx-clock-name = "clk9";
302 tx-clock-name = "clk10";
303 phy-handle = <&phy04>;
304 pio-handle = <&ucc3pio>;
305 };
307 mdio@3120 {
308 #address-cells = <1>;
309 #size-cells = <0>;
310 reg = <0x3120 0x18>;
311 compatible = "fsl,ucc-mdio";
313 phy00:ethernet-phy@00 {
314 interrupt-parent = <&ipic>;
315 interrupts = <0>;
316 reg = <0x0>;
317 device_type = "ethernet-phy";
318 };
319 phy04:ethernet-phy@04 {
320 interrupt-parent = <&ipic>;
321 interrupts = <0>;
322 reg = <0x4>;
323 device_type = "ethernet-phy";
324 };
325 };
327 qeic:interrupt-controller@80 {
328 interrupt-controller;
329 compatible = "fsl,qe-ic";
330 #address-cells = <0>;
331 #interrupt-cells = <1>;
332 reg = <0x80 0x80>;
333 big-endian;
334 interrupts = <32 0x8 33 0x8>; //high:32 low:33
335 interrupt-parent = <&ipic>;
336 };
337 };
339 pci0: pci@e0008500 {
340 interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
341 interrupt-map = <
342 /* IDSEL 0x10 AD16 (USB) */
343 0x8000 0x0 0x0 0x1 &ipic 17 0x8
345 /* IDSEL 0x11 AD17 (Mini1)*/
346 0x8800 0x0 0x0 0x1 &ipic 18 0x8
347 0x8800 0x0 0x0 0x2 &ipic 19 0x8
348 0x8800 0x0 0x0 0x3 &ipic 20 0x8
349 0x8800 0x0 0x0 0x4 &ipic 48 0x8
351 /* IDSEL 0x12 AD18 (PCI/Mini2) */
352 0x9000 0x0 0x0 0x1 &ipic 19 0x8
353 0x9000 0x0 0x0 0x2 &ipic 20 0x8
354 0x9000 0x0 0x0 0x3 &ipic 48 0x8
355 0x9000 0x0 0x0 0x4 &ipic 17 0x8>;
357 interrupt-parent = <&ipic>;
358 interrupts = <66 0x8>;
359 bus-range = <0x0 0x0>;
360 ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
361 0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
362 0x01000000 0x0 0xd0000000 0xd0000000 0x0 0x04000000>;
363 clock-frequency = <0>;
364 #interrupt-cells = <1>;
365 #size-cells = <2>;
366 #address-cells = <3>;
367 reg = <0xe0008500 0x100 /* internal registers */
368 0xe0008300 0x8>; /* config space access registers */
369 compatible = "fsl,mpc8349-pci";
370 device_type = "pci";
371 sleep = <&pmc 0x00010000>;
372 };
373 };