arch/powerpc/platforms/83xx/mpc836x_mds.c

   1 /*
   2  * Copyright (C) Freescale Semicondutor, Inc. 2006. All rights reserved.
   3  *
   4  * Author: Li Yang <LeoLi@freescale.com>
   5  *         Yin Olivia <Hong-hua.Yin@freescale.com>
   6  *
   7  * Description:
   8  * MPC8360E MDS board specific routines.
   9  *
  10  * Changelog:
  11  * Jun 21, 2006 Initial version
  12  *
  13  * This program is free software; you can redistribute it and/or modify it
  14  * under  the terms of  the GNU General  Public License as published by the
  15  * Free Software Foundation;  either version 2 of the  License, or (at your
  16  * option) any later version.
  17  */
  18
  19 #include <linux/stddef.h>
  20 #include <linux/kernel.h>
  21 #include <linux/compiler.h>
  22 #include <linux/init.h>
  23 #include <linux/errno.h>
  24 #include <linux/reboot.h>
  25 #include <linux/pci.h>
  26 #include <linux/kdev_t.h>
  27 #include <linux/major.h>
  28 #include <linux/console.h>
  29 #include <linux/delay.h>
  30 #include <linux/seq_file.h>
  31 #include <linux/root_dev.h>
  32 #include <linux/initrd.h>
  33 #include <linux/of_platform.h>
  34 #include <linux/of_device.h>
  35
  36 #include <asm/system.h>
  37 #include <linux/atomic.h>
  38 #include <asm/time.h>
  39 #include <asm/io.h>
  40 #include <asm/machdep.h>
  41 #include <asm/ipic.h>
  42 #include <asm/irq.h>
  43 #include <asm/prom.h>
  44 #include <asm/udbg.h>
  45 #include <sysdev/fsl_soc.h>
  46 #include <sysdev/fsl_pci.h>
  47 #include <sysdev/simple_gpio.h>
  48 #include <asm/qe.h>
  49 #include <asm/qe_ic.h>
  50
  51 #include "mpc83xx.h"
  52
  53 #undef DEBUG
  54 #ifdef DEBUG
  55 #define DBG(fmt...) udbg_printf(fmt)
  56 #else
  57 #define DBG(fmt...)
  58 #endif
  59
  60 /* ************************************************************************
  61  *
  62  * Setup the architecture
  63  *
  64  */
  65 static void __init mpc836x_mds_setup_arch(void)
  66 {
  67         struct device_node *np;
  68         u8 __iomem *bcsr_regs = NULL;
  69
  70         if (ppc_md.progress)
  71                 ppc_md.progress("mpc836x_mds_setup_arch()", 0);
  72
  73         /* Map BCSR area */
  74         np = of_find_node_by_name(NULL, "bcsr");
  75         if (np) {
  76                 struct resource res;
  77
  78                 of_address_to_resource(np, 0, &res);
  79                 bcsr_regs = ioremap(res.start, resource_size(&res));
  80                 of_node_put(np);
  81         }
  82
  83         mpc83xx_setup_pci();
  84
  85 #ifdef CONFIG_QUICC_ENGINE
  86         qe_reset();
  87
  88         if ((np = of_find_node_by_name(NULL, "par_io")) != NULL) {
  89                 par_io_init(np);
  90                 of_node_put(np);
  91
  92                 for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
  93                         par_io_of_config(np);
  94 #ifdef CONFIG_QE_USB
  95                 /* Must fixup Par IO before QE GPIO chips are registered. */
  96                 par_io_config_pin(1,  2, 1, 0, 3, 0); /* USBOE  */
  97                 par_io_config_pin(1,  3, 1, 0, 3, 0); /* USBTP  */
  98                 par_io_config_pin(1,  8, 1, 0, 1, 0); /* USBTN  */
  99                 par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
 100                 par_io_config_pin(1,  9, 2, 1, 3, 0); /* USBRP  */
 101                 par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN  */
 102                 par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21  */
 103 #endif /* CONFIG_QE_USB */
 104         }
 105
 106         if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
 107                         != NULL){
 108                 uint svid;
 109
 110                 /* Reset the Ethernet PHY */
 111 #define BCSR9_GETHRST 0x20
 112                 clrbits8(&bcsr_regs[9], BCSR9_GETHRST);
 113                 udelay(1000);
 114                 setbits8(&bcsr_regs[9], BCSR9_GETHRST);
 115
 116                 /* handle mpc8360ea rev.2.1 erratum 2: RGMII Timing */
 117                 svid = mfspr(SPRN_SVR);
 118                 if (svid == 0x80480021) {
 119                         void __iomem *immap;
 120
 121                         immap = ioremap(get_immrbase() + 0x14a8, 8);
 122
 123                         /*
 124                          * IMMR + 0x14A8[4:5] = 11 (clk delay for UCC 2)
 125                          * IMMR + 0x14A8[18:19] = 11 (clk delay for UCC 1)
 126                          */
 127                         setbits32(immap, 0x0c003000);
 128
 129                         /*
 130                          * IMMR + 0x14AC[20:27] = 10101010
 131                          * (data delay for both UCC's)
 132                          */
 133                         clrsetbits_be32(immap + 4, 0xff0, 0xaa0);
 134
 135                         iounmap(immap);
 136                 }
 137
 138                 iounmap(bcsr_regs);
 139                 of_node_put(np);
 140         }
 141 #endif                          /* CONFIG_QUICC_ENGINE */
 142 }
 143
 144 machine_device_initcall(mpc836x_mds, mpc83xx_declare_of_platform_devices);
 145
 146 #ifdef CONFIG_QE_USB
 147 static int __init mpc836x_usb_cfg(void)
 148 {
 149         u8 __iomem *bcsr;
 150         struct device_node *np;
 151         const char *mode;
 152         int ret = 0;
 153
 154         np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
 155         if (!np)
 156                 return -ENODEV;
 157
 158         bcsr = of_iomap(np, 0);
 159         of_node_put(np);
 160         if (!bcsr)
 161                 return -ENOMEM;
 162
 163         np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
 164         if (!np) {
 165                 ret = -ENODEV;
 166                 goto err;
 167         }
 168
 169 #define BCSR8_TSEC1M_MASK       (0x3 << 6)
 170 #define BCSR8_TSEC1M_RGMII      (0x0 << 6)
 171 #define BCSR8_TSEC2M_MASK       (0x3 << 4)
 172 #define BCSR8_TSEC2M_RGMII      (0x0 << 4)
 173         /*
 174          * Default is GMII (2), but we should set it to RGMII (0) if we use
 175          * USB (Eth PHY is in RGMII mode anyway).
 176          */
 177         clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
 178                                BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
 179
 180 #define BCSR13_USBMASK  0x0f
 181 #define BCSR13_nUSBEN   0x08 /* 1 - Disable, 0 - Enable                 */
 182 #define BCSR13_USBSPEED 0x04 /* 1 - Full, 0 - Low                       */
 183 #define BCSR13_USBMODE  0x02 /* 1 - Host, 0 - Function                  */
 184 #define BCSR13_nUSBVCC  0x01 /* 1 - gets VBUS, 0 - supplies VBUS        */
 185
 186         clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
 187
 188         mode = of_get_property(np, "mode", NULL);
 189         if (mode && !strcmp(mode, "peripheral")) {
 190                 setbits8(&bcsr[13], BCSR13_nUSBVCC);
 191                 qe_usb_clock_set(QE_CLK21, 48000000);
 192         } else {
 193                 setbits8(&bcsr[13], BCSR13_USBMODE);
 194                 /*
 195                  * The BCSR GPIOs are used to control power and
 196                  * speed of the USB transceiver. This is needed for
 197                  * the USB Host only.
 198                  */
 199                 simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
 200         }
 201
 202         of_node_put(np);
 203 err:
 204         iounmap(bcsr);
 205         return ret;
 206 }
 207 machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
 208 #endif /* CONFIG_QE_USB */
 209
 210 /*
 211  * Called very early, MMU is off, device-tree isn't unflattened
 212  */
 213 static int __init mpc836x_mds_probe(void)
 214 {
 215         unsigned long root = of_get_flat_dt_root();
 216
 217         return of_flat_dt_is_compatible(root, "MPC836xMDS");
 218 }
 219
 220 define_machine(mpc836x_mds) {
 221         .name           = "MPC836x MDS",
 222         .probe          = mpc836x_mds_probe,
 223         .setup_arch     = mpc836x_mds_setup_arch,
 224         .init_IRQ       = mpc83xx_ipic_and_qe_init_IRQ,
 225         .get_irq        = ipic_get_irq,
 226         .restart        = mpc83xx_restart,
 227         .time_init      = mpc83xx_time_init,
 228         .calibrate_decr = generic_calibrate_decr,
 229         .progress       = udbg_progress,
 230 };