1 /**************************************************************************
3 Copyright © 2006 Dave Airlie
7 Permission is hereby granted, free of charge, to any person obtaining a
8 copy of this software and associated documentation files (the
9 "Software"), to deal in the Software without restriction, including
10 without limitation the rights to use, copy, modify, merge, publish,
11 distribute, sub license, and/or sell copies of the Software, and to
12 permit persons to whom the Software is furnished to do so, subject to
13 the following conditions:
15 The above copyright notice and this permission notice (including the
16 next paragraph) shall be included in all copies or substantial portions
19 THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
20 OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
21 MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
22 IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
23 ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
24 TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
25 SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
27 **************************************************************************/
31 #define SIL164_VID 0x0001
32 #define SIL164_DID 0x0006
34 #define SIL164_VID_LO 0x00
35 #define SIL164_VID_HI 0x01
36 #define SIL164_DID_LO 0x02
37 #define SIL164_DID_HI 0x03
38 #define SIL164_REV 0x04
39 #define SIL164_RSVD 0x05
40 #define SIL164_FREQ_LO 0x06
41 #define SIL164_FREQ_HI 0x07
43 #define SIL164_REG8 0x08
44 #define SIL164_8_VEN (1<<5)
45 #define SIL164_8_HEN (1<<4)
46 #define SIL164_8_DSEL (1<<3)
47 #define SIL164_8_BSEL (1<<2)
48 #define SIL164_8_EDGE (1<<1)
49 #define SIL164_8_PD (1<<0)
51 #define SIL164_REG9 0x09
52 #define SIL164_9_VLOW (1<<7)
53 #define SIL164_9_MSEL_MASK (0x7<<4)
54 #define SIL164_9_TSEL (1<<3)
55 #define SIL164_9_RSEN (1<<2)
56 #define SIL164_9_HTPLG (1<<1)
57 #define SIL164_9_MDI (1<<0)
59 #define SIL164_REGC 0x0c
66 #define SILPTR(d) ((SIL164Ptr)(d->DriverPrivate.ptr))
68 static bool sil164_readb(struct intel_dvo_device
*dvo
, int addr
, uint8_t *ch
)
70 struct sil164_priv
*sil
= dvo
->dev_priv
;
71 struct i2c_adapter
*adapter
= dvo
->i2c_bus
;
75 struct i2c_msg msgs
[] = {
77 .addr
= dvo
->slave_addr
,
83 .addr
= dvo
->slave_addr
,
93 if (i2c_transfer(adapter
, msgs
, 2) == 2) {
99 DRM_DEBUG_KMS("Unable to read register 0x%02x from %s:%02x.\n",
100 addr
, adapter
->name
, dvo
->slave_addr
);
105 static bool sil164_writeb(struct intel_dvo_device
*dvo
, int addr
, uint8_t ch
)
107 struct sil164_priv
*sil
= dvo
->dev_priv
;
108 struct i2c_adapter
*adapter
= dvo
->i2c_bus
;
110 struct i2c_msg msg
= {
111 .addr
= dvo
->slave_addr
,
120 if (i2c_transfer(adapter
, &msg
, 1) == 1)
124 DRM_DEBUG_KMS("Unable to write register 0x%02x to %s:%d.\n",
125 addr
, adapter
->name
, dvo
->slave_addr
);
131 /* Silicon Image 164 driver for chip on i2c bus */
132 static bool sil164_init(struct intel_dvo_device
*dvo
,
133 struct i2c_adapter
*adapter
)
135 /* this will detect the SIL164 chip on the specified i2c bus */
136 struct sil164_priv
*sil
;
139 sil
= kzalloc(sizeof(struct sil164_priv
), GFP_KERNEL
);
143 dvo
->i2c_bus
= adapter
;
147 if (!sil164_readb(dvo
, SIL164_VID_LO
, &ch
))
150 if (ch
!= (SIL164_VID
& 0xff)) {
151 DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n",
152 ch
, adapter
->name
, dvo
->slave_addr
);
156 if (!sil164_readb(dvo
, SIL164_DID_LO
, &ch
))
159 if (ch
!= (SIL164_DID
& 0xff)) {
160 DRM_DEBUG_KMS("sil164 not detected got %d: from %s Slave %d.\n",
161 ch
, adapter
->name
, dvo
->slave_addr
);
166 DRM_DEBUG_KMS("init sil164 dvo controller successfully!\n");
174 static enum drm_connector_status
sil164_detect(struct intel_dvo_device
*dvo
)
178 sil164_readb(dvo
, SIL164_REG9
, ®9
);
180 if (reg9
& SIL164_9_HTPLG
)
181 return connector_status_connected
;
183 return connector_status_disconnected
;
186 static enum drm_mode_status
sil164_mode_valid(struct intel_dvo_device
*dvo
,
187 struct drm_display_mode
*mode
)
192 static void sil164_mode_set(struct intel_dvo_device
*dvo
,
193 struct drm_display_mode
*mode
,
194 struct drm_display_mode
*adjusted_mode
)
196 /* As long as the basics are set up, since we don't have clock
197 * dependencies in the mode setup, we can just leave the
198 * registers alone and everything will work fine.
200 /* recommended programming sequence from doc */
201 /*sil164_writeb(sil, 0x08, 0x30);
202 sil164_writeb(sil, 0x09, 0x00);
203 sil164_writeb(sil, 0x0a, 0x90);
204 sil164_writeb(sil, 0x0c, 0x89);
205 sil164_writeb(sil, 0x08, 0x31);*/
210 /* set the SIL164 power state */
211 static void sil164_dpms(struct intel_dvo_device
*dvo
, int mode
)
216 ret
= sil164_readb(dvo
, SIL164_REG8
, &ch
);
220 if (mode
== DRM_MODE_DPMS_ON
)
225 sil164_writeb(dvo
, SIL164_REG8
, ch
);
229 static void sil164_dump_regs(struct intel_dvo_device
*dvo
)
233 sil164_readb(dvo
, SIL164_FREQ_LO
, &val
);
234 DRM_LOG_KMS("SIL164_FREQ_LO: 0x%02x\n", val
);
235 sil164_readb(dvo
, SIL164_FREQ_HI
, &val
);
236 DRM_LOG_KMS("SIL164_FREQ_HI: 0x%02x\n", val
);
237 sil164_readb(dvo
, SIL164_REG8
, &val
);
238 DRM_LOG_KMS("SIL164_REG8: 0x%02x\n", val
);
239 sil164_readb(dvo
, SIL164_REG9
, &val
);
240 DRM_LOG_KMS("SIL164_REG9: 0x%02x\n", val
);
241 sil164_readb(dvo
, SIL164_REGC
, &val
);
242 DRM_LOG_KMS("SIL164_REGC: 0x%02x\n", val
);
245 static void sil164_destroy(struct intel_dvo_device
*dvo
)
247 struct sil164_priv
*sil
= dvo
->dev_priv
;
251 dvo
->dev_priv
= NULL
;
255 struct intel_dvo_dev_ops sil164_ops
= {
257 .detect
= sil164_detect
,
258 .mode_valid
= sil164_mode_valid
,
259 .mode_set
= sil164_mode_set
,
261 .dump_regs
= sil164_dump_regs
,
262 .destroy
= sil164_destroy
,