Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / drivers / infiniband / hw / ipath / ipath_wc_x86_64.c
blob3428acb0868c202383304105546fc023d3a0917e
1 /*
2 * Copyright (c) 2006, 2007 QLogic Corporation. All rights reserved.
3 * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
5 * This software is available to you under a choice of one of two
6 * licenses. You may choose to be licensed under the terms of the GNU
7 * General Public License (GPL) Version 2, available from the file
8 * COPYING in the main directory of this source tree, or the
9 * OpenIB.org BSD license below:
11 * Redistribution and use in source and binary forms, with or
12 * without modification, are permitted provided that the following
13 * conditions are met:
15 * - Redistributions of source code must retain the above
16 * copyright notice, this list of conditions and the following
17 * disclaimer.
19 * - Redistributions in binary form must reproduce the above
20 * copyright notice, this list of conditions and the following
21 * disclaimer in the documentation and/or other materials
22 * provided with the distribution.
24 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
25 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
26 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
27 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
28 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
29 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
30 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
31 * SOFTWARE.
35 * This file is conditionally built on x86_64 only. Otherwise weak symbol
36 * versions of the functions exported from here are used.
39 #include <linux/pci.h>
40 #include <asm/mtrr.h>
41 #include <asm/processor.h>
43 #include "ipath_kernel.h"
45 /**
46 * ipath_enable_wc - enable write combining for MMIO writes to the device
47 * @dd: infinipath device
49 * This routine is x86_64-specific; it twiddles the CPU's MTRRs to enable
50 * write combining.
52 int ipath_enable_wc(struct ipath_devdata *dd)
54 int ret = 0;
55 u64 pioaddr, piolen;
56 unsigned bits;
57 const unsigned long addr = pci_resource_start(dd->pcidev, 0);
58 const size_t len = pci_resource_len(dd->pcidev, 0);
61 * Set the PIO buffers to be WCCOMB, so we get HT bursts to the
62 * chip. Linux (possibly the hardware) requires it to be on a power
63 * of 2 address matching the length (which has to be a power of 2).
64 * For rev1, that means the base address, for rev2, it will be just
65 * the PIO buffers themselves.
66 * For chips with two sets of buffers, the calculations are
67 * somewhat more complicated; we need to sum, and the piobufbase
68 * register has both offsets, 2K in low 32 bits, 4K in high 32 bits.
69 * The buffers are still packed, so a single range covers both.
71 if (dd->ipath_piobcnt2k && dd->ipath_piobcnt4k) { /* 2 sizes */
72 unsigned long pio2kbase, pio4kbase;
73 pio2kbase = dd->ipath_piobufbase & 0xffffffffUL;
74 pio4kbase = (dd->ipath_piobufbase >> 32) & 0xffffffffUL;
75 if (pio2kbase < pio4kbase) { /* all, for now */
76 pioaddr = addr + pio2kbase;
77 piolen = pio4kbase - pio2kbase +
78 dd->ipath_piobcnt4k * dd->ipath_4kalign;
79 } else {
80 pioaddr = addr + pio4kbase;
81 piolen = pio2kbase - pio4kbase +
82 dd->ipath_piobcnt2k * dd->ipath_palign;
84 } else { /* single buffer size (2K, currently) */
85 pioaddr = addr + dd->ipath_piobufbase;
86 piolen = dd->ipath_piobcnt2k * dd->ipath_palign +
87 dd->ipath_piobcnt4k * dd->ipath_4kalign;
90 for (bits = 0; !(piolen & (1ULL << bits)); bits++)
91 /* do nothing */ ;
93 if (piolen != (1ULL << bits)) {
94 piolen >>= bits;
95 while (piolen >>= 1)
96 bits++;
97 piolen = 1ULL << (bits + 1);
99 if (pioaddr & (piolen - 1)) {
100 u64 atmp;
101 ipath_dbg("pioaddr %llx not on right boundary for size "
102 "%llx, fixing\n",
103 (unsigned long long) pioaddr,
104 (unsigned long long) piolen);
105 atmp = pioaddr & ~(piolen - 1);
106 if (atmp < addr || (atmp + piolen) > (addr + len)) {
107 ipath_dev_err(dd, "No way to align address/size "
108 "(%llx/%llx), no WC mtrr\n",
109 (unsigned long long) atmp,
110 (unsigned long long) piolen << 1);
111 ret = -ENODEV;
112 } else {
113 ipath_dbg("changing WC base from %llx to %llx, "
114 "len from %llx to %llx\n",
115 (unsigned long long) pioaddr,
116 (unsigned long long) atmp,
117 (unsigned long long) piolen,
118 (unsigned long long) piolen << 1);
119 pioaddr = atmp;
120 piolen <<= 1;
124 if (!ret) {
125 int cookie;
126 ipath_cdbg(VERBOSE, "Setting mtrr for chip to WC "
127 "(addr %llx, len=0x%llx)\n",
128 (unsigned long long) pioaddr,
129 (unsigned long long) piolen);
130 cookie = mtrr_add(pioaddr, piolen, MTRR_TYPE_WRCOMB, 0);
131 if (cookie < 0) {
133 dev_info(&dd->pcidev->dev,
134 "mtrr_add() WC for PIO bufs "
135 "failed (%d)\n",
136 cookie);
137 ret = -EINVAL;
139 } else {
140 ipath_cdbg(VERBOSE, "Set mtrr for chip to WC, "
141 "cookie is %d\n", cookie);
142 dd->ipath_wc_cookie = cookie;
143 dd->ipath_wc_base = (unsigned long) pioaddr;
144 dd->ipath_wc_len = (unsigned long) piolen;
148 return ret;
152 * ipath_disable_wc - disable write combining for MMIO writes to the device
153 * @dd: infinipath device
155 void ipath_disable_wc(struct ipath_devdata *dd)
157 if (dd->ipath_wc_cookie) {
158 int r;
159 ipath_cdbg(VERBOSE, "undoing WCCOMB on pio buffers\n");
160 r = mtrr_del(dd->ipath_wc_cookie, dd->ipath_wc_base,
161 dd->ipath_wc_len);
162 if (r < 0)
163 dev_info(&dd->pcidev->dev,
164 "mtrr_del(%lx, %lx, %lx) failed: %d\n",
165 dd->ipath_wc_cookie, dd->ipath_wc_base,
166 dd->ipath_wc_len, r);
167 dd->ipath_wc_cookie = 0; /* even on failure */
172 * ipath_unordered_wc - indicate whether write combining is ordered
174 * Because our performance depends on our ability to do write combining mmio
175 * writes in the most efficient way, we need to know if we are on an Intel
176 * or AMD x86_64 processor. AMD x86_64 processors flush WC buffers out in
177 * the order completed, and so no special flushing is required to get
178 * correct ordering. Intel processors, however, will flush write buffers
179 * out in "random" orders, and so explicit ordering is needed at times.
181 int ipath_unordered_wc(void)
183 return boot_cpu_data.x86_vendor != X86_VENDOR_AMD;