?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / drivers / input / touchscreen / atmel_tsadcc.c
blob201b2d2ec1b3bbb63f47d4c4d207c842532f6db2
1 /*
2 * Atmel Touch Screen Driver
3 *
4 * Copyright (c) 2008 ATMEL
5 * Copyright (c) 2008 Dan Liang
6 * Copyright (c) 2008 TimeSys Corporation
7 * Copyright (c) 2008 Justin Waters
8 *
9 * Based on touchscreen code from Atmel Corporation.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15 #include <linux/init.h>
16 #include <linux/err.h>
17 #include <linux/kernel.h>
18 #include <linux/module.h>
19 #include <linux/input.h>
20 #include <linux/slab.h>
21 #include <linux/interrupt.h>
22 #include <linux/clk.h>
23 #include <linux/platform_device.h>
24 #include <linux/io.h>
25 #include <mach/board.h>
26 #include <mach/cpu.h>
27
28 /* Register definitions based on AT91SAM9RL64 preliminary draft datasheet */
29
30 #define ATMEL_TSADCC_CR 0x00 /* Control register */
31 #define ATMEL_TSADCC_SWRST (1 << 0) /* Software Reset*/
32 #define ATMEL_TSADCC_START (1 << 1) /* Start conversion */
33
34 #define ATMEL_TSADCC_MR 0x04 /* Mode register */
35 #define ATMEL_TSADCC_TSAMOD (3 << 0) /* ADC mode */
36 #define ATMEL_TSADCC_TSAMOD_ADC_ONLY_MODE (0x0) /* ADC Mode */
37 #define ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE (0x1) /* Touch Screen Only Mode */
38 #define ATMEL_TSADCC_LOWRES (1 << 4) /* Resolution selection */
39 #define ATMEL_TSADCC_SLEEP (1 << 5) /* Sleep mode */
40 #define ATMEL_TSADCC_PENDET (1 << 6) /* Pen Detect selection */
41 #define ATMEL_TSADCC_PRES (1 << 7) /* Pressure Measurement Selection */
42 #define ATMEL_TSADCC_PRESCAL (0x3f << 8) /* Prescalar Rate Selection */
43 #define ATMEL_TSADCC_EPRESCAL (0xff << 8) /* Prescalar Rate Selection (Extended) */
44 #define ATMEL_TSADCC_STARTUP (0x7f << 16) /* Start Up time */
45 #define ATMEL_TSADCC_SHTIM (0xf << 24) /* Sample & Hold time */
46 #define ATMEL_TSADCC_PENDBC (0xf << 28) /* Pen Detect debouncing time */
47
48 #define ATMEL_TSADCC_TRGR 0x08 /* Trigger register */
49 #define ATMEL_TSADCC_TRGMOD (7 << 0) /* Trigger mode */
50 #define ATMEL_TSADCC_TRGMOD_NONE (0 << 0)
51 #define ATMEL_TSADCC_TRGMOD_EXT_RISING (1 << 0)
52 #define ATMEL_TSADCC_TRGMOD_EXT_FALLING (2 << 0)
53 #define ATMEL_TSADCC_TRGMOD_EXT_ANY (3 << 0)
54 #define ATMEL_TSADCC_TRGMOD_PENDET (4 << 0)
55 #define ATMEL_TSADCC_TRGMOD_PERIOD (5 << 0)
56 #define ATMEL_TSADCC_TRGMOD_CONTINUOUS (6 << 0)
57 #define ATMEL_TSADCC_TRGPER (0xffff << 16) /* Trigger period */
58
59 #define ATMEL_TSADCC_TSR 0x0C /* Touch Screen register */
60 #define ATMEL_TSADCC_TSFREQ (0xf << 0) /* TS Frequency in Interleaved mode */
61 #define ATMEL_TSADCC_TSSHTIM (0xf << 24) /* Sample & Hold time */
62
63 #define ATMEL_TSADCC_CHER 0x10 /* Channel Enable register */
64 #define ATMEL_TSADCC_CHDR 0x14 /* Channel Disable register */
65 #define ATMEL_TSADCC_CHSR 0x18 /* Channel Status register */
66 #define ATMEL_TSADCC_CH(n) (1 << (n)) /* Channel number */
67
68 #define ATMEL_TSADCC_SR 0x1C /* Status register */
69 #define ATMEL_TSADCC_EOC(n) (1 << ((n)+0)) /* End of conversion for channel N */
70 #define ATMEL_TSADCC_OVRE(n) (1 << ((n)+8)) /* Overrun error for channel N */
71 #define ATMEL_TSADCC_DRDY (1 << 16) /* Data Ready */
72 #define ATMEL_TSADCC_GOVRE (1 << 17) /* General Overrun Error */
73 #define ATMEL_TSADCC_ENDRX (1 << 18) /* End of RX Buffer */
74 #define ATMEL_TSADCC_RXBUFF (1 << 19) /* TX Buffer full */
75 #define ATMEL_TSADCC_PENCNT (1 << 20) /* Pen contact */
76 #define ATMEL_TSADCC_NOCNT (1 << 21) /* No contact */
77
78 #define ATMEL_TSADCC_LCDR 0x20 /* Last Converted Data register */
79 #define ATMEL_TSADCC_DATA (0x3ff << 0) /* Channel data */
80
81 #define ATMEL_TSADCC_IER 0x24 /* Interrupt Enable register */
82 #define ATMEL_TSADCC_IDR 0x28 /* Interrupt Disable register */
83 #define ATMEL_TSADCC_IMR 0x2C /* Interrupt Mask register */
84 #define ATMEL_TSADCC_CDR0 0x30 /* Channel Data 0 */
85 #define ATMEL_TSADCC_CDR1 0x34 /* Channel Data 1 */
86 #define ATMEL_TSADCC_CDR2 0x38 /* Channel Data 2 */
87 #define ATMEL_TSADCC_CDR3 0x3C /* Channel Data 3 */
88 #define ATMEL_TSADCC_CDR4 0x40 /* Channel Data 4 */
89 #define ATMEL_TSADCC_CDR5 0x44 /* Channel Data 5 */
90
91 #define ATMEL_TSADCC_XPOS 0x50
92 #define ATMEL_TSADCC_Z1DAT 0x54
93 #define ATMEL_TSADCC_Z2DAT 0x58
94
95 #define PRESCALER_VAL(x) ((x) >> 8)
96
97 #define ADC_DEFAULT_CLOCK 100000
98
99 struct atmel_tsadcc {
100 struct input_dev *input;
101 char phys[32];
102 struct clk *clk;
103 int irq;
104 unsigned int prev_absx;
105 unsigned int prev_absy;
106 unsigned char bufferedmeasure;
107 };
108
109 static void __iomem *tsc_base;
110
111 #define atmel_tsadcc_read(reg) __raw_readl(tsc_base + (reg))
112 #define atmel_tsadcc_write(reg, val) __raw_writel((val), tsc_base + (reg))
113
114 static irqreturn_t atmel_tsadcc_interrupt(int irq, void *dev)
115 {
116 struct atmel_tsadcc *ts_dev = (struct atmel_tsadcc *)dev;
117 struct input_dev *input_dev = ts_dev->input;
118
119 unsigned int status;
120 unsigned int reg;
121
122 status = atmel_tsadcc_read(ATMEL_TSADCC_SR);
123 status &= atmel_tsadcc_read(ATMEL_TSADCC_IMR);
124
125 if (status & ATMEL_TSADCC_NOCNT) {
126 /* Contact lost */
127 reg = atmel_tsadcc_read(ATMEL_TSADCC_MR) | ATMEL_TSADCC_PENDBC;
128
129 atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
130 atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
131 atmel_tsadcc_write(ATMEL_TSADCC_IDR,
132 ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
133 atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
134
135 input_report_key(input_dev, BTN_TOUCH, 0);
136 ts_dev->bufferedmeasure = 0;
137 input_sync(input_dev);
138
139 } else if (status & ATMEL_TSADCC_PENCNT) {
140 /* Pen detected */
141 reg = atmel_tsadcc_read(ATMEL_TSADCC_MR);
142 reg &= ~ATMEL_TSADCC_PENDBC;
143
144 atmel_tsadcc_write(ATMEL_TSADCC_IDR, ATMEL_TSADCC_PENCNT);
145 atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
146 atmel_tsadcc_write(ATMEL_TSADCC_IER,
147 ATMEL_TSADCC_EOC(3) | ATMEL_TSADCC_NOCNT);
148 atmel_tsadcc_write(ATMEL_TSADCC_TRGR,
149 ATMEL_TSADCC_TRGMOD_PERIOD | (0x0FFF << 16));
150
151 } else if (status & ATMEL_TSADCC_EOC(3)) {
152 /* Conversion finished */
153
154 if (ts_dev->bufferedmeasure) {
155 /* Last measurement is always discarded, since it can
156 * be erroneous.
157 * Always report previous measurement */
158 input_report_abs(input_dev, ABS_X, ts_dev->prev_absx);
159 input_report_abs(input_dev, ABS_Y, ts_dev->prev_absy);
160 input_report_key(input_dev, BTN_TOUCH, 1);
161 input_sync(input_dev);
162 } else
163 ts_dev->bufferedmeasure = 1;
164
165 /* Now make new measurement */
166 ts_dev->prev_absx = atmel_tsadcc_read(ATMEL_TSADCC_CDR3) << 10;
167 ts_dev->prev_absx /= atmel_tsadcc_read(ATMEL_TSADCC_CDR2);
168
169 ts_dev->prev_absy = atmel_tsadcc_read(ATMEL_TSADCC_CDR1) << 10;
170 ts_dev->prev_absy /= atmel_tsadcc_read(ATMEL_TSADCC_CDR0);
171 }
172
173 return IRQ_HANDLED;
174 }
175
176 /*
177 * The functions for inserting/removing us as a module.
178 */
179
180 static int __devinit atmel_tsadcc_probe(struct platform_device *pdev)
181 {
182 struct atmel_tsadcc *ts_dev;
183 struct input_dev *input_dev;
184 struct resource *res;
185 struct at91_tsadcc_data *pdata = pdev->dev.platform_data;
186 int err = 0;
187 unsigned int prsc;
188 unsigned int reg;
189
190 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
191 if (!res) {
192 dev_err(&pdev->dev, "no mmio resource defined.\n");
193 return -ENXIO;
194 }
195
196 /* Allocate memory for device */
197 ts_dev = kzalloc(sizeof(struct atmel_tsadcc), GFP_KERNEL);
198 if (!ts_dev) {
199 dev_err(&pdev->dev, "failed to allocate memory.\n");
200 return -ENOMEM;
201 }
202 platform_set_drvdata(pdev, ts_dev);
203
204 input_dev = input_allocate_device();
205 if (!input_dev) {
206 dev_err(&pdev->dev, "failed to allocate input device.\n");
207 err = -EBUSY;
208 goto err_free_mem;
209 }
210
211 ts_dev->irq = platform_get_irq(pdev, 0);
212 if (ts_dev->irq < 0) {
213 dev_err(&pdev->dev, "no irq ID is designated.\n");
214 err = -ENODEV;
215 goto err_free_dev;
216 }
217
218 if (!request_mem_region(res->start, resource_size(res),
219 "atmel tsadcc regs")) {
220 dev_err(&pdev->dev, "resources is unavailable.\n");
221 err = -EBUSY;
222 goto err_free_dev;
223 }
224
225 tsc_base = ioremap(res->start, resource_size(res));
226 if (!tsc_base) {
227 dev_err(&pdev->dev, "failed to map registers.\n");
228 err = -ENOMEM;
229 goto err_release_mem;
230 }
231
232 err = request_irq(ts_dev->irq, atmel_tsadcc_interrupt, 0,
233 pdev->dev.driver->name, ts_dev);
234 if (err) {
235 dev_err(&pdev->dev, "failed to allocate irq.\n");
236 goto err_unmap_regs;
237 }
238
239 ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
240 if (IS_ERR(ts_dev->clk)) {
241 dev_err(&pdev->dev, "failed to get ts_clk\n");
242 err = PTR_ERR(ts_dev->clk);
243 goto err_free_irq;
244 }
245
246 ts_dev->input = input_dev;
247 ts_dev->bufferedmeasure = 0;
248
249 snprintf(ts_dev->phys, sizeof(ts_dev->phys),
250 "%s/input0", dev_name(&pdev->dev));
251
252 input_dev->name = "atmel touch screen controller";
253 input_dev->phys = ts_dev->phys;
254 input_dev->dev.parent = &pdev->dev;
255
256 __set_bit(EV_ABS, input_dev->evbit);
257 input_set_abs_params(input_dev, ABS_X, 0, 0x3FF, 0, 0);
258 input_set_abs_params(input_dev, ABS_Y, 0, 0x3FF, 0, 0);
259
260 input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
261
262 /* clk_enable() always returns 0, no need to check it */
263 clk_enable(ts_dev->clk);
264
265 prsc = clk_get_rate(ts_dev->clk);
266 dev_info(&pdev->dev, "Master clock is set at: %d Hz\n", prsc);
267
268 if (!pdata)
269 goto err_fail;
270
271 if (!pdata->adc_clock)
272 pdata->adc_clock = ADC_DEFAULT_CLOCK;
273
274 prsc = (prsc / (2 * pdata->adc_clock)) - 1;
275
276 /* saturate if this value is too high */
277 if (cpu_is_at91sam9rl()) {
278 if (prsc > PRESCALER_VAL(ATMEL_TSADCC_PRESCAL))
279 prsc = PRESCALER_VAL(ATMEL_TSADCC_PRESCAL);
280 } else {
281 if (prsc > PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL))
282 prsc = PRESCALER_VAL(ATMEL_TSADCC_EPRESCAL);
283 }
284
285 dev_info(&pdev->dev, "Prescaler is set at: %d\n", prsc);
286
287 reg = ATMEL_TSADCC_TSAMOD_TS_ONLY_MODE |
288 ((0x00 << 5) & ATMEL_TSADCC_SLEEP) | /* Normal Mode */
289 ((0x01 << 6) & ATMEL_TSADCC_PENDET) | /* Enable Pen Detect */
290 (prsc << 8) |
291 ((0x26 << 16) & ATMEL_TSADCC_STARTUP) |
292 ((pdata->pendet_debounce << 28) & ATMEL_TSADCC_PENDBC);
293
294 atmel_tsadcc_write(ATMEL_TSADCC_CR, ATMEL_TSADCC_SWRST);
295 atmel_tsadcc_write(ATMEL_TSADCC_MR, reg);
296 atmel_tsadcc_write(ATMEL_TSADCC_TRGR, ATMEL_TSADCC_TRGMOD_NONE);
297 atmel_tsadcc_write(ATMEL_TSADCC_TSR,
298 (pdata->ts_sample_hold_time << 24) & ATMEL_TSADCC_TSSHTIM);
299
300 atmel_tsadcc_read(ATMEL_TSADCC_SR);
301 atmel_tsadcc_write(ATMEL_TSADCC_IER, ATMEL_TSADCC_PENCNT);
302
303 /* All went ok, so register to the input system */
304 err = input_register_device(input_dev);
305 if (err)
306 goto err_fail;
307
308 return 0;
309
310 err_fail:
311 clk_disable(ts_dev->clk);
312 clk_put(ts_dev->clk);
313 err_free_irq:
314 free_irq(ts_dev->irq, ts_dev);
315 err_unmap_regs:
316 iounmap(tsc_base);
317 err_release_mem:
318 release_mem_region(res->start, resource_size(res));
319 err_free_dev:
320 input_free_device(input_dev);
321 err_free_mem:
322 kfree(ts_dev);
323 return err;
324 }
325
326 static int __devexit atmel_tsadcc_remove(struct platform_device *pdev)
327 {
328 struct atmel_tsadcc *ts_dev = dev_get_drvdata(&pdev->dev);
329 struct resource *res;
330
331 free_irq(ts_dev->irq, ts_dev);
332
333 input_unregister_device(ts_dev->input);
334
335 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
336 iounmap(tsc_base);
337 release_mem_region(res->start, resource_size(res));
338
339 clk_disable(ts_dev->clk);
340 clk_put(ts_dev->clk);
341
342 kfree(ts_dev);
343
344 return 0;
345 }
346
347 static struct platform_driver atmel_tsadcc_driver = {
348 .probe = atmel_tsadcc_probe,
349 .remove = __devexit_p(atmel_tsadcc_remove),
350 .driver = {
351 .name = "atmel_tsadcc",
352 },
353 };
354 module_platform_driver(atmel_tsadcc_driver);
355
356 MODULE_LICENSE("GPL");
357 MODULE_DESCRIPTION("Atmel TouchScreen Driver");
358 MODULE_AUTHOR("Dan Liang <dan.liang@atmel.com>");
359