1 #ifndef _DVB_USB_VP7021_H_
2 #define _DVB_USB_VP7021_H_
4 #define DVB_USB_LOG_PREFIX "vp702x"
7 extern int dvb_usb_vp702x_debug
;
8 #define deb_info(args...) dprintk(dvb_usb_vp702x_debug,0x01,args)
9 #define deb_xfer(args...) dprintk(dvb_usb_vp702x_debug,0x02,args)
10 #define deb_rc(args...) dprintk(dvb_usb_vp702x_debug,0x04,args)
11 #define deb_fe(args...) dprintk(dvb_usb_vp702x_debug,0x08,args)
13 /* commands are read and written with USB control messages */
15 /* consecutive read/write operation */
16 #define REQUEST_OUT 0xB2
17 #define REQUEST_IN 0xB3
19 /* the out-buffer of these consecutive operations contain sub-commands when b[0] = 0
20 * request: 0xB2; i: 0; v: 0; b[0] = 0, b[1] = subcmd, additional buffer
21 * the returning buffer looks as follows
22 * request: 0xB3; i: 0; v: 0; b[0] = 0xB3, additional buffer */
24 #define GET_TUNER_STATUS 0x05
25 /* additional in buffer:
27 * N/A N/A 0x05 signal-quality N/A N/A signal-strength lock==0 N/A */
29 #define GET_SYSTEM_STRING 0x06
30 /* additional in buffer:
32 * N/A 'U' 'S' 'B' '7' '0' '2' 'X' N/A */
34 #define SET_DISEQC_CMD 0x08
35 /* additional out buffer:
38 * additional in buffer:
40 * N/A 0 0 b[1] == b[2] == 0 -> success, failure otherwise */
42 #define SET_LNB_POWER 0x09
43 /* additional out buffer:
45 * 0x00 0xff 1 = on, 0 = off
46 * additional in buffer:
48 * N/A 0 0 b[1] == b[2] == 0 -> success failure otherwise */
50 #define GET_MAC_ADDRESS 0x0A
51 /* #define GET_MAC_ADDRESS 0x0B */
52 /* additional in buffer:
54 * N/A N/A 0x0A or 0x0B MAC0 MAC1 MAC2 MAC3 MAC4 MAC5 */
56 #define SET_PID_FILTER 0x11
57 /* additional in buffer:
59 * PID0_MSB PID0_LSB ... PID7_MSB PID7_LSB PID_active (bits) */
61 /* request: 0xB2; i: 0; v: 0;
62 * b[0] != 0 -> tune and lock a channel
64 * freq0 freq1 divstep srate0 srate1 srate2 flag chksum
67 /* one direction requests */
68 #define READ_REMOTE_REQ 0xB4
69 /* IN i: 0; v: 0; b[0] == request, b[1] == key */
71 #define READ_PID_NUMBER_REQ 0xB5
72 /* IN i: 0; v: 0; b[0] == request, b[1] == 0, b[2] = pid number */
74 #define WRITE_EEPROM_REQ 0xB6
75 /* OUT i: offset; v: value to write; no extra buffer */
77 #define READ_EEPROM_REQ 0xB7
78 /* IN i: bufferlen; v: offset; buffer with bufferlen bytes */
80 #define READ_STATUS 0xB8
81 /* IN i: 0; v: 0; bufferlen 10 */
83 #define READ_TUNER_REG_REQ 0xB9
84 /* IN i: 0; v: register; b[0] = value */
86 #define READ_FX2_REG_REQ 0xBA
87 /* IN i: offset; v: 0; b[0] = value */
89 #define WRITE_FX2_REG_REQ 0xBB
90 /* OUT i: offset; v: value to write; 1 byte extra buffer */
92 #define SET_TUNER_POWER_REQ 0xBC
93 /* IN i: 0 = power off, 1 = power on */
95 #define WRITE_TUNER_REG_REQ 0xBD
96 /* IN i: register, v: value to write, no extra buffer */
98 #define RESET_TUNER 0xBE
99 /* IN i: 0, v: 0, no extra buffer */
101 struct vp702x_device_state
{
102 struct mutex buf_mutex
;
108 extern struct dvb_frontend
* vp702x_fe_attach(struct dvb_usb_device
*d
);
110 extern int vp702x_usb_inout_op(struct dvb_usb_device
*d
, u8
*o
, int olen
, u8
*i
, int ilen
, int msec
);
111 extern int vp702x_usb_in_op(struct dvb_usb_device
*d
, u8 req
, u16 value
, u16 index
, u8
*b
, int blen
);