2 * Core registration and callback routines for MTD
5 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org>
6 * Copyright © 2006 Red Hat UK Limited
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
24 #include <linux/module.h>
25 #include <linux/kernel.h>
26 #include <linux/ptrace.h>
27 #include <linux/seq_file.h>
28 #include <linux/string.h>
29 #include <linux/timer.h>
30 #include <linux/major.h>
32 #include <linux/err.h>
33 #include <linux/ioctl.h>
34 #include <linux/init.h>
35 #include <linux/proc_fs.h>
36 #include <linux/idr.h>
37 #include <linux/backing-dev.h>
38 #include <linux/gfp.h>
40 #include <linux/mtd/mtd.h>
41 #include <linux/mtd/partitions.h>
45 * backing device capabilities for non-mappable devices (such as NAND flash)
46 * - permits private mappings, copies are taken of the data
48 static struct backing_dev_info mtd_bdi_unmappable
= {
49 .capabilities
= BDI_CAP_MAP_COPY
,
53 * backing device capabilities for R/O mappable devices (such as ROM)
54 * - permits private mappings, copies are taken of the data
55 * - permits non-writable shared mappings
57 static struct backing_dev_info mtd_bdi_ro_mappable
= {
58 .capabilities
= (BDI_CAP_MAP_COPY
| BDI_CAP_MAP_DIRECT
|
59 BDI_CAP_EXEC_MAP
| BDI_CAP_READ_MAP
),
63 * backing device capabilities for writable mappable devices (such as RAM)
64 * - permits private mappings, copies are taken of the data
65 * - permits non-writable shared mappings
67 static struct backing_dev_info mtd_bdi_rw_mappable
= {
68 .capabilities
= (BDI_CAP_MAP_COPY
| BDI_CAP_MAP_DIRECT
|
69 BDI_CAP_EXEC_MAP
| BDI_CAP_READ_MAP
|
73 static int mtd_cls_suspend(struct device
*dev
, pm_message_t state
);
74 static int mtd_cls_resume(struct device
*dev
);
76 static struct class mtd_class
= {
79 .suspend
= mtd_cls_suspend
,
80 .resume
= mtd_cls_resume
,
83 static DEFINE_IDR(mtd_idr
);
85 /* These are exported solely for the purpose of mtd_blkdevs.c. You
86 should not use them for _anything_ else */
87 DEFINE_MUTEX(mtd_table_mutex
);
88 EXPORT_SYMBOL_GPL(mtd_table_mutex
);
90 struct mtd_info
*__mtd_next_device(int i
)
92 return idr_get_next(&mtd_idr
, &i
);
94 EXPORT_SYMBOL_GPL(__mtd_next_device
);
96 static LIST_HEAD(mtd_notifiers
);
99 #if defined(CONFIG_MTD_CHAR) || defined(CONFIG_MTD_CHAR_MODULE)
100 #define MTD_DEVT(index) MKDEV(MTD_CHAR_MAJOR, (index)*2)
102 #define MTD_DEVT(index) 0
105 /* REVISIT once MTD uses the driver model better, whoever allocates
106 * the mtd_info will probably want to use the release() hook...
108 static void mtd_release(struct device
*dev
)
110 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
111 dev_t index
= MTD_DEVT(mtd
->index
);
113 /* remove /dev/mtdXro node if needed */
115 device_destroy(&mtd_class
, index
+ 1);
118 static int mtd_cls_suspend(struct device
*dev
, pm_message_t state
)
120 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
122 return mtd
? mtd_suspend(mtd
) : 0;
125 static int mtd_cls_resume(struct device
*dev
)
127 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
129 if (mtd
&& mtd
->resume
)
134 static ssize_t
mtd_type_show(struct device
*dev
,
135 struct device_attribute
*attr
, char *buf
)
137 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
166 return snprintf(buf
, PAGE_SIZE
, "%s\n", type
);
168 static DEVICE_ATTR(type
, S_IRUGO
, mtd_type_show
, NULL
);
170 static ssize_t
mtd_flags_show(struct device
*dev
,
171 struct device_attribute
*attr
, char *buf
)
173 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
175 return snprintf(buf
, PAGE_SIZE
, "0x%lx\n", (unsigned long)mtd
->flags
);
178 static DEVICE_ATTR(flags
, S_IRUGO
, mtd_flags_show
, NULL
);
180 static ssize_t
mtd_size_show(struct device
*dev
,
181 struct device_attribute
*attr
, char *buf
)
183 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
185 return snprintf(buf
, PAGE_SIZE
, "%llu\n",
186 (unsigned long long)mtd
->size
);
189 static DEVICE_ATTR(size
, S_IRUGO
, mtd_size_show
, NULL
);
191 static ssize_t
mtd_erasesize_show(struct device
*dev
,
192 struct device_attribute
*attr
, char *buf
)
194 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
196 return snprintf(buf
, PAGE_SIZE
, "%lu\n", (unsigned long)mtd
->erasesize
);
199 static DEVICE_ATTR(erasesize
, S_IRUGO
, mtd_erasesize_show
, NULL
);
201 static ssize_t
mtd_writesize_show(struct device
*dev
,
202 struct device_attribute
*attr
, char *buf
)
204 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
206 return snprintf(buf
, PAGE_SIZE
, "%lu\n", (unsigned long)mtd
->writesize
);
209 static DEVICE_ATTR(writesize
, S_IRUGO
, mtd_writesize_show
, NULL
);
211 static ssize_t
mtd_subpagesize_show(struct device
*dev
,
212 struct device_attribute
*attr
, char *buf
)
214 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
215 unsigned int subpagesize
= mtd
->writesize
>> mtd
->subpage_sft
;
217 return snprintf(buf
, PAGE_SIZE
, "%u\n", subpagesize
);
220 static DEVICE_ATTR(subpagesize
, S_IRUGO
, mtd_subpagesize_show
, NULL
);
222 static ssize_t
mtd_oobsize_show(struct device
*dev
,
223 struct device_attribute
*attr
, char *buf
)
225 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
227 return snprintf(buf
, PAGE_SIZE
, "%lu\n", (unsigned long)mtd
->oobsize
);
230 static DEVICE_ATTR(oobsize
, S_IRUGO
, mtd_oobsize_show
, NULL
);
232 static ssize_t
mtd_numeraseregions_show(struct device
*dev
,
233 struct device_attribute
*attr
, char *buf
)
235 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
237 return snprintf(buf
, PAGE_SIZE
, "%u\n", mtd
->numeraseregions
);
240 static DEVICE_ATTR(numeraseregions
, S_IRUGO
, mtd_numeraseregions_show
,
243 static ssize_t
mtd_name_show(struct device
*dev
,
244 struct device_attribute
*attr
, char *buf
)
246 struct mtd_info
*mtd
= dev_get_drvdata(dev
);
248 return snprintf(buf
, PAGE_SIZE
, "%s\n", mtd
->name
);
251 static DEVICE_ATTR(name
, S_IRUGO
, mtd_name_show
, NULL
);
253 static struct attribute
*mtd_attrs
[] = {
255 &dev_attr_flags
.attr
,
257 &dev_attr_erasesize
.attr
,
258 &dev_attr_writesize
.attr
,
259 &dev_attr_subpagesize
.attr
,
260 &dev_attr_oobsize
.attr
,
261 &dev_attr_numeraseregions
.attr
,
266 static struct attribute_group mtd_group
= {
270 static const struct attribute_group
*mtd_groups
[] = {
275 static struct device_type mtd_devtype
= {
277 .groups
= mtd_groups
,
278 .release
= mtd_release
,
282 * add_mtd_device - register an MTD device
283 * @mtd: pointer to new MTD device info structure
285 * Add a device to the list of MTD devices present in the system, and
286 * notify each currently active MTD 'user' of its arrival. Returns
287 * zero on success or 1 on failure, which currently will only happen
288 * if there is insufficient memory or a sysfs error.
291 int add_mtd_device(struct mtd_info
*mtd
)
293 struct mtd_notifier
*not;
296 if (!mtd
->backing_dev_info
) {
299 mtd
->backing_dev_info
= &mtd_bdi_rw_mappable
;
302 mtd
->backing_dev_info
= &mtd_bdi_ro_mappable
;
305 mtd
->backing_dev_info
= &mtd_bdi_unmappable
;
310 BUG_ON(mtd
->writesize
== 0);
311 mutex_lock(&mtd_table_mutex
);
314 if (!idr_pre_get(&mtd_idr
, GFP_KERNEL
))
316 error
= idr_get_new(&mtd_idr
, mtd
, &i
);
317 } while (error
== -EAGAIN
);
325 if (is_power_of_2(mtd
->erasesize
))
326 mtd
->erasesize_shift
= ffs(mtd
->erasesize
) - 1;
328 mtd
->erasesize_shift
= 0;
330 if (is_power_of_2(mtd
->writesize
))
331 mtd
->writesize_shift
= ffs(mtd
->writesize
) - 1;
333 mtd
->writesize_shift
= 0;
335 mtd
->erasesize_mask
= (1 << mtd
->erasesize_shift
) - 1;
336 mtd
->writesize_mask
= (1 << mtd
->writesize_shift
) - 1;
338 /* Some chips always power up locked. Unlock them now */
339 if ((mtd
->flags
& MTD_WRITEABLE
) && (mtd
->flags
& MTD_POWERUP_LOCK
)) {
340 error
= mtd_unlock(mtd
, 0, mtd
->size
);
341 if (error
&& error
!= -EOPNOTSUPP
)
343 "%s: unlock failed, writes may not work\n",
347 /* Caller should have set dev.parent to match the
350 mtd
->dev
.type
= &mtd_devtype
;
351 mtd
->dev
.class = &mtd_class
;
352 mtd
->dev
.devt
= MTD_DEVT(i
);
353 dev_set_name(&mtd
->dev
, "mtd%d", i
);
354 dev_set_drvdata(&mtd
->dev
, mtd
);
355 if (device_register(&mtd
->dev
) != 0)
359 device_create(&mtd_class
, mtd
->dev
.parent
,
363 pr_debug("mtd: Giving out device %d to %s\n", i
, mtd
->name
);
364 /* No need to get a refcount on the module containing
365 the notifier, since we hold the mtd_table_mutex */
366 list_for_each_entry(not, &mtd_notifiers
, list
)
369 mutex_unlock(&mtd_table_mutex
);
370 /* We _know_ we aren't being removed, because
371 our caller is still holding us here. So none
372 of this try_ nonsense, and no bitching about it
374 __module_get(THIS_MODULE
);
378 idr_remove(&mtd_idr
, i
);
380 mutex_unlock(&mtd_table_mutex
);
385 * del_mtd_device - unregister an MTD device
386 * @mtd: pointer to MTD device info structure
388 * Remove a device from the list of MTD devices present in the system,
389 * and notify each currently active MTD 'user' of its departure.
390 * Returns zero on success or 1 on failure, which currently will happen
391 * if the requested device does not appear to be present in the list.
394 int del_mtd_device(struct mtd_info
*mtd
)
397 struct mtd_notifier
*not;
399 mutex_lock(&mtd_table_mutex
);
401 if (idr_find(&mtd_idr
, mtd
->index
) != mtd
) {
406 /* No need to get a refcount on the module containing
407 the notifier, since we hold the mtd_table_mutex */
408 list_for_each_entry(not, &mtd_notifiers
, list
)
412 printk(KERN_NOTICE
"Removing MTD device #%d (%s) with use count %d\n",
413 mtd
->index
, mtd
->name
, mtd
->usecount
);
416 device_unregister(&mtd
->dev
);
418 idr_remove(&mtd_idr
, mtd
->index
);
420 module_put(THIS_MODULE
);
425 mutex_unlock(&mtd_table_mutex
);
430 * mtd_device_parse_register - parse partitions and register an MTD device.
432 * @mtd: the MTD device to register
433 * @types: the list of MTD partition probes to try, see
434 * 'parse_mtd_partitions()' for more information
435 * @parser_data: MTD partition parser-specific data
436 * @parts: fallback partition information to register, if parsing fails;
437 * only valid if %nr_parts > %0
438 * @nr_parts: the number of partitions in parts, if zero then the full
439 * MTD device is registered if no partition info is found
441 * This function aggregates MTD partitions parsing (done by
442 * 'parse_mtd_partitions()') and MTD device and partitions registering. It
443 * basically follows the most common pattern found in many MTD drivers:
445 * * It first tries to probe partitions on MTD device @mtd using parsers
446 * specified in @types (if @types is %NULL, then the default list of parsers
447 * is used, see 'parse_mtd_partitions()' for more information). If none are
448 * found this functions tries to fallback to information specified in
450 * * If any partitioning info was found, this function registers the found
452 * * If no partitions were found this function just registers the MTD device
455 * Returns zero in case of success and a negative error code in case of failure.
457 int mtd_device_parse_register(struct mtd_info
*mtd
, const char **types
,
458 struct mtd_part_parser_data
*parser_data
,
459 const struct mtd_partition
*parts
,
463 struct mtd_partition
*real_parts
;
465 err
= parse_mtd_partitions(mtd
, types
, &real_parts
, parser_data
);
466 if (err
<= 0 && nr_parts
&& parts
) {
467 real_parts
= kmemdup(parts
, sizeof(*parts
) * nr_parts
,
476 err
= add_mtd_partitions(mtd
, real_parts
, err
);
478 } else if (err
== 0) {
479 err
= add_mtd_device(mtd
);
486 EXPORT_SYMBOL_GPL(mtd_device_parse_register
);
489 * mtd_device_unregister - unregister an existing MTD device.
491 * @master: the MTD device to unregister. This will unregister both the master
492 * and any partitions if registered.
494 int mtd_device_unregister(struct mtd_info
*master
)
498 err
= del_mtd_partitions(master
);
502 if (!device_is_registered(&master
->dev
))
505 return del_mtd_device(master
);
507 EXPORT_SYMBOL_GPL(mtd_device_unregister
);
510 * register_mtd_user - register a 'user' of MTD devices.
511 * @new: pointer to notifier info structure
513 * Registers a pair of callbacks function to be called upon addition
514 * or removal of MTD devices. Causes the 'add' callback to be immediately
515 * invoked for each MTD device currently present in the system.
517 void register_mtd_user (struct mtd_notifier
*new)
519 struct mtd_info
*mtd
;
521 mutex_lock(&mtd_table_mutex
);
523 list_add(&new->list
, &mtd_notifiers
);
525 __module_get(THIS_MODULE
);
527 mtd_for_each_device(mtd
)
530 mutex_unlock(&mtd_table_mutex
);
532 EXPORT_SYMBOL_GPL(register_mtd_user
);
535 * unregister_mtd_user - unregister a 'user' of MTD devices.
536 * @old: pointer to notifier info structure
538 * Removes a callback function pair from the list of 'users' to be
539 * notified upon addition or removal of MTD devices. Causes the
540 * 'remove' callback to be immediately invoked for each MTD device
541 * currently present in the system.
543 int unregister_mtd_user (struct mtd_notifier
*old
)
545 struct mtd_info
*mtd
;
547 mutex_lock(&mtd_table_mutex
);
549 module_put(THIS_MODULE
);
551 mtd_for_each_device(mtd
)
554 list_del(&old
->list
);
555 mutex_unlock(&mtd_table_mutex
);
558 EXPORT_SYMBOL_GPL(unregister_mtd_user
);
561 * get_mtd_device - obtain a validated handle for an MTD device
562 * @mtd: last known address of the required MTD device
563 * @num: internal device number of the required MTD device
565 * Given a number and NULL address, return the num'th entry in the device
566 * table, if any. Given an address and num == -1, search the device table
567 * for a device with that address and return if it's still present. Given
568 * both, return the num'th driver only if its address matches. Return
571 struct mtd_info
*get_mtd_device(struct mtd_info
*mtd
, int num
)
573 struct mtd_info
*ret
= NULL
, *other
;
576 mutex_lock(&mtd_table_mutex
);
579 mtd_for_each_device(other
) {
585 } else if (num
>= 0) {
586 ret
= idr_find(&mtd_idr
, num
);
587 if (mtd
&& mtd
!= ret
)
596 err
= __get_mtd_device(ret
);
600 mutex_unlock(&mtd_table_mutex
);
603 EXPORT_SYMBOL_GPL(get_mtd_device
);
606 int __get_mtd_device(struct mtd_info
*mtd
)
610 if (!try_module_get(mtd
->owner
))
613 if (mtd
->get_device
) {
614 err
= mtd
->get_device(mtd
);
617 module_put(mtd
->owner
);
624 EXPORT_SYMBOL_GPL(__get_mtd_device
);
627 * get_mtd_device_nm - obtain a validated handle for an MTD device by
629 * @name: MTD device name to open
631 * This function returns MTD device description structure in case of
632 * success and an error code in case of failure.
634 struct mtd_info
*get_mtd_device_nm(const char *name
)
637 struct mtd_info
*mtd
= NULL
, *other
;
639 mutex_lock(&mtd_table_mutex
);
641 mtd_for_each_device(other
) {
642 if (!strcmp(name
, other
->name
)) {
651 err
= __get_mtd_device(mtd
);
655 mutex_unlock(&mtd_table_mutex
);
659 mutex_unlock(&mtd_table_mutex
);
662 EXPORT_SYMBOL_GPL(get_mtd_device_nm
);
664 void put_mtd_device(struct mtd_info
*mtd
)
666 mutex_lock(&mtd_table_mutex
);
667 __put_mtd_device(mtd
);
668 mutex_unlock(&mtd_table_mutex
);
671 EXPORT_SYMBOL_GPL(put_mtd_device
);
673 void __put_mtd_device(struct mtd_info
*mtd
)
676 BUG_ON(mtd
->usecount
< 0);
679 mtd
->put_device(mtd
);
681 module_put(mtd
->owner
);
683 EXPORT_SYMBOL_GPL(__put_mtd_device
);
686 * default_mtd_writev - the default writev method
687 * @mtd: mtd device description object pointer
688 * @vecs: the vectors to write
689 * @count: count of vectors in @vecs
690 * @to: the MTD device offset to write to
691 * @retlen: on exit contains the count of bytes written to the MTD device.
693 * This function returns zero in case of success and a negative error code in
696 static int default_mtd_writev(struct mtd_info
*mtd
, const struct kvec
*vecs
,
697 unsigned long count
, loff_t to
, size_t *retlen
)
700 size_t totlen
= 0, thislen
;
703 for (i
= 0; i
< count
; i
++) {
704 if (!vecs
[i
].iov_len
)
706 ret
= mtd_write(mtd
, to
, vecs
[i
].iov_len
, &thislen
,
709 if (ret
|| thislen
!= vecs
[i
].iov_len
)
711 to
+= vecs
[i
].iov_len
;
718 * mtd_writev - the vector-based MTD write method
719 * @mtd: mtd device description object pointer
720 * @vecs: the vectors to write
721 * @count: count of vectors in @vecs
722 * @to: the MTD device offset to write to
723 * @retlen: on exit contains the count of bytes written to the MTD device.
725 * This function returns zero in case of success and a negative error code in
728 int mtd_writev(struct mtd_info
*mtd
, const struct kvec
*vecs
,
729 unsigned long count
, loff_t to
, size_t *retlen
)
733 return default_mtd_writev(mtd
, vecs
, count
, to
, retlen
);
734 return mtd
->writev(mtd
, vecs
, count
, to
, retlen
);
736 EXPORT_SYMBOL_GPL(mtd_writev
);
739 * mtd_kmalloc_up_to - allocate a contiguous buffer up to the specified size
740 * @mtd: mtd device description object pointer
741 * @size: a pointer to the ideal or maximum size of the allocation, points
742 * to the actual allocation size on success.
744 * This routine attempts to allocate a contiguous kernel buffer up to
745 * the specified size, backing off the size of the request exponentially
746 * until the request succeeds or until the allocation size falls below
747 * the system page size. This attempts to make sure it does not adversely
748 * impact system performance, so when allocating more than one page, we
749 * ask the memory allocator to avoid re-trying, swapping, writing back
752 * Note, this function also makes sure that the allocated buffer is aligned to
753 * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value.
755 * This is called, for example by mtd_{read,write} and jffs2_scan_medium,
756 * to handle smaller (i.e. degraded) buffer allocations under low- or
757 * fragmented-memory situations where such reduced allocations, from a
758 * requested ideal, are allowed.
760 * Returns a pointer to the allocated buffer on success; otherwise, NULL.
762 void *mtd_kmalloc_up_to(const struct mtd_info
*mtd
, size_t *size
)
764 gfp_t flags
= __GFP_NOWARN
| __GFP_WAIT
|
765 __GFP_NORETRY
| __GFP_NO_KSWAPD
;
766 size_t min_alloc
= max_t(size_t, mtd
->writesize
, PAGE_SIZE
);
769 *size
= min_t(size_t, *size
, KMALLOC_MAX_SIZE
);
771 while (*size
> min_alloc
) {
772 kbuf
= kmalloc(*size
, flags
);
777 *size
= ALIGN(*size
, mtd
->writesize
);
781 * For the last resort allocation allow 'kmalloc()' to do all sorts of
782 * things (write-back, dropping caches, etc) by using GFP_KERNEL.
784 return kmalloc(*size
, GFP_KERNEL
);
786 EXPORT_SYMBOL_GPL(mtd_kmalloc_up_to
);
788 #ifdef CONFIG_PROC_FS
790 /*====================================================================*/
791 /* Support for /proc/mtd */
793 static struct proc_dir_entry
*proc_mtd
;
795 static int mtd_proc_show(struct seq_file
*m
, void *v
)
797 struct mtd_info
*mtd
;
799 seq_puts(m
, "dev: size erasesize name\n");
800 mutex_lock(&mtd_table_mutex
);
801 mtd_for_each_device(mtd
) {
802 seq_printf(m
, "mtd%d: %8.8llx %8.8x \"%s\"\n",
803 mtd
->index
, (unsigned long long)mtd
->size
,
804 mtd
->erasesize
, mtd
->name
);
806 mutex_unlock(&mtd_table_mutex
);
810 static int mtd_proc_open(struct inode
*inode
, struct file
*file
)
812 return single_open(file
, mtd_proc_show
, NULL
);
815 static const struct file_operations mtd_proc_ops
= {
816 .open
= mtd_proc_open
,
819 .release
= single_release
,
821 #endif /* CONFIG_PROC_FS */
823 /*====================================================================*/
826 static int __init
mtd_bdi_init(struct backing_dev_info
*bdi
, const char *name
)
832 ret
= bdi_register(bdi
, NULL
, name
);
840 static int __init
init_mtd(void)
844 ret
= class_register(&mtd_class
);
848 ret
= mtd_bdi_init(&mtd_bdi_unmappable
, "mtd-unmap");
852 ret
= mtd_bdi_init(&mtd_bdi_ro_mappable
, "mtd-romap");
856 ret
= mtd_bdi_init(&mtd_bdi_rw_mappable
, "mtd-rwmap");
860 #ifdef CONFIG_PROC_FS
861 proc_mtd
= proc_create("mtd", 0, NULL
, &mtd_proc_ops
);
862 #endif /* CONFIG_PROC_FS */
866 bdi_destroy(&mtd_bdi_ro_mappable
);
868 bdi_destroy(&mtd_bdi_unmappable
);
870 class_unregister(&mtd_class
);
872 pr_err("Error registering mtd class or bdi: %d\n", ret
);
876 static void __exit
cleanup_mtd(void)
878 #ifdef CONFIG_PROC_FS
880 remove_proc_entry( "mtd", NULL
);
881 #endif /* CONFIG_PROC_FS */
882 class_unregister(&mtd_class
);
883 bdi_destroy(&mtd_bdi_unmappable
);
884 bdi_destroy(&mtd_bdi_ro_mappable
);
885 bdi_destroy(&mtd_bdi_rw_mappable
);
888 module_init(init_mtd
);
889 module_exit(cleanup_mtd
);
891 MODULE_LICENSE("GPL");
892 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
893 MODULE_DESCRIPTION("Core MTD registration and access routines");