1 /* sun3lance.c: Ethernet driver for SUN3 Lance chip */
4 Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
5 This driver is a part of the linux kernel, and is thus distributed
6 under the GNU General Public License.
8 The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
9 true for the correct IRQ and address of the lance registers. They
10 have not been widely tested, however. What we probably need is a
11 "proper" way to search for a device in the sun3's prom, but, alas,
12 linux has no such thing.
14 This driver is largely based on atarilance.c, by Roman Hodek. Other
15 sources of inspiration were the NetBSD sun3 am7990 driver, and the
16 linux sparc lance driver (sunlance.c).
18 There are more assumptions made throughout this driver, it almost
19 certainly still needs work, but it does work at least for RARP/BOOTP and
20 mounting the root NFS filesystem.
24 static char *version
= "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
26 #include <linux/module.h>
27 #include <linux/stddef.h>
28 #include <linux/kernel.h>
29 #include <linux/string.h>
30 #include <linux/errno.h>
31 #include <linux/interrupt.h>
32 #include <linux/init.h>
33 #include <linux/ioport.h>
34 #include <linux/delay.h>
35 #include <linux/netdevice.h>
36 #include <linux/etherdevice.h>
37 #include <linux/skbuff.h>
38 #include <linux/bitops.h>
40 #include <asm/cacheflush.h>
41 #include <asm/setup.h>
44 #include <asm/pgtable.h>
46 #include <asm/idprom.h>
47 #include <asm/machines.h>
50 #include <asm/sun3mmu.h>
52 #include <asm/sun3xprom.h>
55 /* sun3/60 addr/irq for the lance chip. If your sun is different,
57 #define LANCE_OBIO 0x120000
58 #define LANCE_IRQ IRQ_AUTO_3
61 * 0 = silent, print only serious errors
62 * 1 = normal, print error messages
63 * 2 = debug, print debug infos
64 * 3 = debug, print even more debug infos (packet data)
70 static int lance_debug
= LANCE_DEBUG
;
72 static int lance_debug
= 1;
74 module_param(lance_debug
, int, 0);
75 MODULE_PARM_DESC(lance_debug
, "SUN3 Lance debug level (0-3)");
76 MODULE_LICENSE("GPL");
78 #define DPRINTK(n,a) \
80 if (lance_debug >= n) \
85 /* we're only using 32k of memory, so we use 4 TX
86 buffers and 16 RX buffers. These values are expressed as log2. */
88 #define TX_LOG_RING_SIZE 3
89 #define RX_LOG_RING_SIZE 5
91 /* These are the derived values */
93 #define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
94 #define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
95 #define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
97 #define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
98 #define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
99 #define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
101 /* Definitions for packet buffer access: */
102 #define PKT_BUF_SZ 1544
104 /* Get the address of a packet buffer corresponding to a given buffer head */
105 #define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
108 /* The LANCE Rx and Tx ring descriptors. */
109 struct lance_rx_head
{
110 unsigned short base
; /* Low word of base addr */
111 volatile unsigned char flag
;
112 unsigned char base_hi
; /* High word of base addr (unused) */
113 short buf_length
; /* This length is 2s complement! */
114 volatile short msg_length
; /* This length is "normal". */
117 struct lance_tx_head
{
118 unsigned short base
; /* Low word of base addr */
119 volatile unsigned char flag
;
120 unsigned char base_hi
; /* High word of base addr (unused) */
121 short length
; /* Length is 2s complement! */
125 /* The LANCE initialization block, described in databook. */
126 struct lance_init_block
{
127 unsigned short mode
; /* Pre-set mode */
128 unsigned char hwaddr
[6]; /* Physical ethernet address */
129 unsigned int filter
[2]; /* Multicast filter (unused). */
130 /* Receive and transmit ring base, along with length bits. */
135 unsigned short pad
[4]; /* is thie needed? */
138 /* The whole layout of the Lance shared memory */
139 struct lance_memory
{
140 struct lance_init_block init
;
141 struct lance_tx_head tx_head
[TX_RING_SIZE
];
142 struct lance_rx_head rx_head
[RX_RING_SIZE
];
143 char rx_data
[RX_RING_SIZE
][PKT_BUF_SZ
];
144 char tx_data
[TX_RING_SIZE
][PKT_BUF_SZ
];
147 /* The driver's private device structure */
149 struct lance_private
{
150 volatile unsigned short *iobase
;
151 struct lance_memory
*mem
;
152 int new_rx
, new_tx
; /* The next free ring entry */
153 int old_tx
, old_rx
; /* ring entry to be processed */
154 /* These two must be longs for set_bit() */
159 /* I/O register access macros */
162 #define DREG lp->iobase[0]
163 #define AREG lp->iobase[1]
164 #define REGA(a) (*( AREG = (a), &DREG ))
166 /* Definitions for the Lance */
169 #define TMD1_ENP 0x01 /* end of packet */
170 #define TMD1_STP 0x02 /* start of packet */
171 #define TMD1_DEF 0x04 /* deferred */
172 #define TMD1_ONE 0x08 /* one retry needed */
173 #define TMD1_MORE 0x10 /* more than one retry needed */
174 #define TMD1_ERR 0x40 /* error summary */
175 #define TMD1_OWN 0x80 /* ownership (set: chip owns) */
177 #define TMD1_OWN_CHIP TMD1_OWN
178 #define TMD1_OWN_HOST 0
180 /* tx_head misc field */
181 #define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
182 #define TMD3_RTRY 0x0400 /* failed after 16 retries */
183 #define TMD3_LCAR 0x0800 /* carrier lost */
184 #define TMD3_LCOL 0x1000 /* late collision */
185 #define TMD3_UFLO 0x4000 /* underflow (late memory) */
186 #define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
189 #define RMD1_ENP 0x01 /* end of packet */
190 #define RMD1_STP 0x02 /* start of packet */
191 #define RMD1_BUFF 0x04 /* buffer error */
192 #define RMD1_CRC 0x08 /* CRC error */
193 #define RMD1_OFLO 0x10 /* overflow */
194 #define RMD1_FRAM 0x20 /* framing error */
195 #define RMD1_ERR 0x40 /* error summary */
196 #define RMD1_OWN 0x80 /* ownership (set: ship owns) */
198 #define RMD1_OWN_CHIP RMD1_OWN
199 #define RMD1_OWN_HOST 0
202 #define CSR0 0 /* mode/status */
203 #define CSR1 1 /* init block addr (low) */
204 #define CSR2 2 /* init block addr (high) */
205 #define CSR3 3 /* misc */
206 #define CSR8 8 /* address filter */
207 #define CSR15 15 /* promiscuous mode */
210 /* (R=readable, W=writeable, S=set on write, C=clear on write) */
211 #define CSR0_INIT 0x0001 /* initialize (RS) */
212 #define CSR0_STRT 0x0002 /* start (RS) */
213 #define CSR0_STOP 0x0004 /* stop (RS) */
214 #define CSR0_TDMD 0x0008 /* transmit demand (RS) */
215 #define CSR0_TXON 0x0010 /* transmitter on (R) */
216 #define CSR0_RXON 0x0020 /* receiver on (R) */
217 #define CSR0_INEA 0x0040 /* interrupt enable (RW) */
218 #define CSR0_INTR 0x0080 /* interrupt active (R) */
219 #define CSR0_IDON 0x0100 /* initialization done (RC) */
220 #define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
221 #define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
222 #define CSR0_MERR 0x0800 /* memory error (RC) */
223 #define CSR0_MISS 0x1000 /* missed frame (RC) */
224 #define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
225 #define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
226 #define CSR0_ERR 0x8000 /* error (RC) */
229 #define CSR3_BCON 0x0001 /* byte control */
230 #define CSR3_ACON 0x0002 /* ALE control */
231 #define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
233 /***************************** Prototypes *****************************/
235 static int lance_probe( struct net_device
*dev
);
236 static int lance_open( struct net_device
*dev
);
237 static void lance_init_ring( struct net_device
*dev
);
238 static int lance_start_xmit( struct sk_buff
*skb
, struct net_device
*dev
);
239 static irqreturn_t
lance_interrupt( int irq
, void *dev_id
);
240 static int lance_rx( struct net_device
*dev
);
241 static int lance_close( struct net_device
*dev
);
242 static void set_multicast_list( struct net_device
*dev
);
244 /************************* End of Prototypes **************************/
246 struct net_device
* __init
sun3lance_probe(int unit
)
248 struct net_device
*dev
;
252 if (!MACH_IS_SUN3
&& !MACH_IS_SUN3X
)
253 return ERR_PTR(-ENODEV
);
255 /* check that this machine has an onboard lance */
256 switch(idprom
->id_machtype
) {
257 case SM_SUN3
|SM_3_50
:
258 case SM_SUN3
|SM_3_60
:
259 case SM_SUN3X
|SM_3_80
:
260 /* these machines have lance */
264 return ERR_PTR(-ENODEV
);
268 return ERR_PTR(-ENODEV
);
270 dev
= alloc_etherdev(sizeof(struct lance_private
));
272 return ERR_PTR(-ENOMEM
);
274 sprintf(dev
->name
, "eth%d", unit
);
275 netdev_boot_setup_check(dev
);
278 if (!lance_probe(dev
))
281 err
= register_netdev(dev
);
289 iounmap((void __iomem
*)dev
->base_addr
);
296 static const struct net_device_ops lance_netdev_ops
= {
297 .ndo_open
= lance_open
,
298 .ndo_stop
= lance_close
,
299 .ndo_start_xmit
= lance_start_xmit
,
300 .ndo_set_rx_mode
= set_multicast_list
,
301 .ndo_set_mac_address
= NULL
,
302 .ndo_change_mtu
= eth_change_mtu
,
303 .ndo_validate_addr
= eth_validate_addr
,
306 static int __init
lance_probe( struct net_device
*dev
)
308 unsigned long ioaddr
;
310 struct lance_private
*lp
;
312 static int did_version
;
313 volatile unsigned short *ioaddr_probe
;
314 unsigned short tmp1
, tmp2
;
317 ioaddr
= (unsigned long)ioremap(LANCE_OBIO
, PAGE_SIZE
);
321 ioaddr
= SUN3X_LANCE
;
324 /* test to see if there's really a lance here */
325 /* (CSRO_INIT shouldn't be readable) */
327 ioaddr_probe
= (volatile unsigned short *)ioaddr
;
328 tmp1
= ioaddr_probe
[0];
329 tmp2
= ioaddr_probe
[1];
331 ioaddr_probe
[1] = CSR0
;
332 ioaddr_probe
[0] = CSR0_INIT
| CSR0_STOP
;
334 if(ioaddr_probe
[0] != CSR0_STOP
) {
335 ioaddr_probe
[0] = tmp1
;
336 ioaddr_probe
[1] = tmp2
;
339 iounmap((void __iomem
*)ioaddr
);
344 lp
= netdev_priv(dev
);
347 MEM
= dvma_malloc_align(sizeof(struct lance_memory
), 0x10000);
350 iounmap((void __iomem
*)ioaddr
);
352 printk(KERN_WARNING
"SUN3 Lance couldn't allocate DVMA memory\n");
356 lp
->iobase
= (volatile unsigned short *)ioaddr
;
357 dev
->base_addr
= (unsigned long)ioaddr
; /* informational only */
359 REGA(CSR0
) = CSR0_STOP
;
361 if (request_irq(LANCE_IRQ
, lance_interrupt
, IRQF_DISABLED
, "SUN3 Lance", dev
) < 0) {
363 iounmap((void __iomem
*)ioaddr
);
365 dvma_free((void *)MEM
);
366 printk(KERN_WARNING
"SUN3 Lance unable to allocate IRQ\n");
369 dev
->irq
= (unsigned short)LANCE_IRQ
;
372 printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
374 (unsigned long)ioaddr
,
378 /* copy in the ethernet address from the prom */
379 for(i
= 0; i
< 6 ; i
++)
380 dev
->dev_addr
[i
] = idprom
->id_ethaddr
[i
];
382 /* tell the card it's ether address, bytes swapped */
383 MEM
->init
.hwaddr
[0] = dev
->dev_addr
[1];
384 MEM
->init
.hwaddr
[1] = dev
->dev_addr
[0];
385 MEM
->init
.hwaddr
[2] = dev
->dev_addr
[3];
386 MEM
->init
.hwaddr
[3] = dev
->dev_addr
[2];
387 MEM
->init
.hwaddr
[4] = dev
->dev_addr
[5];
388 MEM
->init
.hwaddr
[5] = dev
->dev_addr
[4];
390 printk("%pM\n", dev
->dev_addr
);
392 MEM
->init
.mode
= 0x0000;
393 MEM
->init
.filter
[0] = 0x00000000;
394 MEM
->init
.filter
[1] = 0x00000000;
395 MEM
->init
.rdra
= dvma_vtob(MEM
->rx_head
);
396 MEM
->init
.rlen
= (RX_LOG_RING_SIZE
<< 13) |
397 (dvma_vtob(MEM
->rx_head
) >> 16);
398 MEM
->init
.tdra
= dvma_vtob(MEM
->tx_head
);
399 MEM
->init
.tlen
= (TX_LOG_RING_SIZE
<< 13) |
400 (dvma_vtob(MEM
->tx_head
) >> 16);
402 DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
403 dvma_vtob(&(MEM
->init
)), dvma_vtob(MEM
->rx_head
),
404 (dvma_vtob(MEM
->tx_head
))));
406 if (did_version
++ == 0)
409 dev
->netdev_ops
= &lance_netdev_ops
;
410 // KLUDGE -- REMOVE ME
411 set_bit(__LINK_STATE_PRESENT
, &dev
->state
);
417 static int lance_open( struct net_device
*dev
)
419 struct lance_private
*lp
= netdev_priv(dev
);
422 DPRINTK( 2, ( "%s: lance_open()\n", dev
->name
));
424 REGA(CSR0
) = CSR0_STOP
;
426 lance_init_ring(dev
);
428 /* From now on, AREG is kept to point to CSR0 */
429 REGA(CSR0
) = CSR0_INIT
;
433 if (DREG
& CSR0_IDON
)
435 if (i
<= 0 || (DREG
& CSR0_ERR
)) {
436 DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
437 dev
->name
, i
, DREG
));
442 DREG
= CSR0_IDON
| CSR0_STRT
| CSR0_INEA
;
444 netif_start_queue(dev
);
446 DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev
->name
, DREG
));
452 /* Initialize the LANCE Rx and Tx rings. */
454 static void lance_init_ring( struct net_device
*dev
)
456 struct lance_private
*lp
= netdev_priv(dev
);
461 lp
->new_rx
= lp
->new_tx
= 0;
462 lp
->old_rx
= lp
->old_tx
= 0;
464 for( i
= 0; i
< TX_RING_SIZE
; i
++ ) {
465 MEM
->tx_head
[i
].base
= dvma_vtob(MEM
->tx_data
[i
]);
466 MEM
->tx_head
[i
].flag
= 0;
467 MEM
->tx_head
[i
].base_hi
=
468 (dvma_vtob(MEM
->tx_data
[i
])) >>16;
469 MEM
->tx_head
[i
].length
= 0;
470 MEM
->tx_head
[i
].misc
= 0;
473 for( i
= 0; i
< RX_RING_SIZE
; i
++ ) {
474 MEM
->rx_head
[i
].base
= dvma_vtob(MEM
->rx_data
[i
]);
475 MEM
->rx_head
[i
].flag
= RMD1_OWN_CHIP
;
476 MEM
->rx_head
[i
].base_hi
=
477 (dvma_vtob(MEM
->rx_data
[i
])) >> 16;
478 MEM
->rx_head
[i
].buf_length
= -PKT_BUF_SZ
| 0xf000;
479 MEM
->rx_head
[i
].msg_length
= 0;
482 /* tell the card it's ether address, bytes swapped */
483 MEM
->init
.hwaddr
[0] = dev
->dev_addr
[1];
484 MEM
->init
.hwaddr
[1] = dev
->dev_addr
[0];
485 MEM
->init
.hwaddr
[2] = dev
->dev_addr
[3];
486 MEM
->init
.hwaddr
[3] = dev
->dev_addr
[2];
487 MEM
->init
.hwaddr
[4] = dev
->dev_addr
[5];
488 MEM
->init
.hwaddr
[5] = dev
->dev_addr
[4];
490 MEM
->init
.mode
= 0x0000;
491 MEM
->init
.filter
[0] = 0x00000000;
492 MEM
->init
.filter
[1] = 0x00000000;
493 MEM
->init
.rdra
= dvma_vtob(MEM
->rx_head
);
494 MEM
->init
.rlen
= (RX_LOG_RING_SIZE
<< 13) |
495 (dvma_vtob(MEM
->rx_head
) >> 16);
496 MEM
->init
.tdra
= dvma_vtob(MEM
->tx_head
);
497 MEM
->init
.tlen
= (TX_LOG_RING_SIZE
<< 13) |
498 (dvma_vtob(MEM
->tx_head
) >> 16);
501 /* tell the lance the address of its init block */
502 REGA(CSR1
) = dvma_vtob(&(MEM
->init
));
503 REGA(CSR2
) = dvma_vtob(&(MEM
->init
)) >> 16;
506 REGA(CSR3
) = CSR3_BSWP
| CSR3_ACON
| CSR3_BCON
;
508 REGA(CSR3
) = CSR3_BSWP
;
514 static int lance_start_xmit( struct sk_buff
*skb
, struct net_device
*dev
)
516 struct lance_private
*lp
= netdev_priv(dev
);
518 struct lance_tx_head
*head
;
521 DPRINTK( 1, ( "%s: transmit start.\n",
524 /* Transmitter timeout, serious problems. */
525 if (netif_queue_stopped(dev
)) {
526 int tickssofar
= jiffies
- dev_trans_start(dev
);
527 if (tickssofar
< HZ
/5)
528 return NETDEV_TX_BUSY
;
530 DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
534 * Always set BSWP after a STOP as STOP puts it back into
535 * little endian mode.
537 REGA(CSR3
) = CSR3_BSWP
;
538 dev
->stats
.tx_errors
++;
540 if(lance_debug
>= 2) {
542 printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
543 lp
->old_tx
, lp
->new_tx
,
544 lp
->tx_full
? " (full)" : "",
546 for( i
= 0 ; i
< RX_RING_SIZE
; i
++ )
547 printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
548 i
, MEM
->rx_head
[i
].base
,
549 -MEM
->rx_head
[i
].buf_length
,
550 MEM
->rx_head
[i
].msg_length
);
551 for( i
= 0 ; i
< TX_RING_SIZE
; i
++ )
552 printk("tx #%d: base=%04x len=%04x misc=%04x\n",
553 i
, MEM
->tx_head
[i
].base
,
554 -MEM
->tx_head
[i
].length
,
555 MEM
->tx_head
[i
].misc
);
558 lance_init_ring(dev
);
559 REGA( CSR0
) = CSR0_INEA
| CSR0_INIT
| CSR0_STRT
;
561 netif_start_queue(dev
);
567 /* Block a timer-based transmit from overlapping. This could better be
568 done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
570 /* Block a timer-based transmit from overlapping with us by
571 stopping the queue for a bit... */
573 netif_stop_queue(dev
);
575 if (test_and_set_bit( 0, (void*)&lp
->lock
) != 0) {
576 printk( "%s: tx queue lock!.\n", dev
->name
);
577 /* don't clear dev->tbusy flag. */
578 return NETDEV_TX_BUSY
;
582 DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
586 /* this weirdness doesn't appear on sun3... */
587 if(!(DREG
& CSR0_INIT
)) {
588 DPRINTK( 1, ("INIT not set, reinitializing...\n"));
589 REGA( CSR0
) = CSR0_STOP
;
590 lance_init_ring(dev
);
591 REGA( CSR0
) = CSR0_INIT
| CSR0_STRT
;
595 /* Fill in a Tx ring entry */
597 if (lance_debug
>= 2) {
598 printk( "%s: TX pkt %d type 0x%04x"
600 " data at 0x%08x len %d\n",
601 dev
->name
, lp
->new_tx
, ((u_short
*)skb
->data
)[6],
602 DEV_ADDR(&skb
->data
[6]), DEV_ADDR(skb
->data
),
603 (int)skb
->data
, (int)skb
->len
);
606 /* We're not prepared for the int until the last flags are set/reset.
607 * And the int may happen already after setting the OWN_CHIP... */
608 local_irq_save(flags
);
610 /* Mask to ring buffer boundary. */
612 head
= &(MEM
->tx_head
[entry
]);
614 /* Caution: the write order is important here, set the "ownership" bits
618 /* the sun3's lance needs it's buffer padded to the minimum
620 len
= (ETH_ZLEN
< skb
->len
) ? skb
->len
: ETH_ZLEN
;
622 // head->length = -len;
623 head
->length
= (-len
) | 0xf000;
626 skb_copy_from_linear_data(skb
, PKTBUF_ADDR(head
), skb
->len
);
628 memset(PKTBUF_ADDR(head
) + skb
->len
, 0, len
-skb
->len
);
630 head
->flag
= TMD1_OWN_CHIP
| TMD1_ENP
| TMD1_STP
;
631 lp
->new_tx
= (lp
->new_tx
+ 1) & TX_RING_MOD_MASK
;
632 dev
->stats
.tx_bytes
+= skb
->len
;
634 /* Trigger an immediate send poll. */
635 REGA(CSR0
) = CSR0_INEA
| CSR0_TDMD
| CSR0_STRT
;
637 DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
642 if ((MEM
->tx_head
[(entry
+1) & TX_RING_MOD_MASK
].flag
& TMD1_OWN
) ==
644 netif_start_queue(dev
);
646 local_irq_restore(flags
);
651 /* The LANCE interrupt handler. */
653 static irqreturn_t
lance_interrupt( int irq
, void *dev_id
)
655 struct net_device
*dev
= dev_id
;
656 struct lance_private
*lp
= netdev_priv(dev
);
658 static int in_interrupt
;
661 DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
666 DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev
->name
));
676 DREG
= csr0
& (CSR0_TINT
| CSR0_RINT
| CSR0_IDON
);
680 DREG
= CSR0_BABL
| CSR0_MERR
| CSR0_CERR
| CSR0_MISS
;
683 DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
684 dev
->name
, csr0
, DREG
));
686 if (csr0
& CSR0_TINT
) { /* Tx-done interrupt */
687 int old_tx
= lp
->old_tx
;
689 // if(lance_debug >= 3) {
692 // printk("%s: tx int\n", dev->name);
694 // for(i = 0; i < TX_RING_SIZE; i++)
695 // printk("ring %d flag=%04x\n", i,
696 // MEM->tx_head[i].flag);
699 while( old_tx
!= lp
->new_tx
) {
700 struct lance_tx_head
*head
= &(MEM
->tx_head
[old_tx
]);
702 DPRINTK(3, ("on tx_ring %d\n", old_tx
));
704 if (head
->flag
& TMD1_OWN_CHIP
)
705 break; /* It still hasn't been Txed */
707 if (head
->flag
& TMD1_ERR
) {
708 int status
= head
->misc
;
709 dev
->stats
.tx_errors
++;
710 if (status
& TMD3_RTRY
) dev
->stats
.tx_aborted_errors
++;
711 if (status
& TMD3_LCAR
) dev
->stats
.tx_carrier_errors
++;
712 if (status
& TMD3_LCOL
) dev
->stats
.tx_window_errors
++;
713 if (status
& (TMD3_UFLO
| TMD3_BUFF
)) {
714 dev
->stats
.tx_fifo_errors
++;
715 printk("%s: Tx FIFO error\n",
717 REGA(CSR0
) = CSR0_STOP
;
718 REGA(CSR3
) = CSR3_BSWP
;
719 lance_init_ring(dev
);
720 REGA(CSR0
) = CSR0_STRT
| CSR0_INEA
;
723 } else if(head
->flag
& (TMD1_ENP
| TMD1_STP
)) {
725 head
->flag
&= ~(TMD1_ENP
| TMD1_STP
);
726 if(head
->flag
& (TMD1_ONE
| TMD1_MORE
))
727 dev
->stats
.collisions
++;
729 dev
->stats
.tx_packets
++;
730 DPRINTK(3, ("cleared tx ring %d\n", old_tx
));
732 old_tx
= (old_tx
+1) & TX_RING_MOD_MASK
;
739 if (netif_queue_stopped(dev
)) {
740 /* The ring is no longer full, clear tbusy. */
741 netif_start_queue(dev
);
742 netif_wake_queue(dev
);
745 if (csr0
& CSR0_RINT
) /* Rx interrupt */
748 /* Log misc errors. */
749 if (csr0
& CSR0_BABL
) dev
->stats
.tx_errors
++; /* Tx babble. */
750 if (csr0
& CSR0_MISS
) dev
->stats
.rx_errors
++; /* Missed a Rx frame. */
751 if (csr0
& CSR0_MERR
) {
752 DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
753 "status %04x.\n", dev
->name
, csr0
));
754 /* Restart the chip. */
755 REGA(CSR0
) = CSR0_STOP
;
756 REGA(CSR3
) = CSR3_BSWP
;
757 lance_init_ring(dev
);
758 REGA(CSR0
) = CSR0_STRT
| CSR0_INEA
;
762 /* Clear any other interrupt, and set interrupt enable. */
763 // DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
764 // CSR0_IDON | CSR0_INEA;
766 REGA(CSR0
) = CSR0_INEA
;
768 if(DREG
& (CSR0_RINT
| CSR0_TINT
)) {
769 DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG
));
773 DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
779 /* get packet, toss into skbuff */
780 static int lance_rx( struct net_device
*dev
)
782 struct lance_private
*lp
= netdev_priv(dev
);
783 int entry
= lp
->new_rx
;
785 /* If we own the next entry, it's a new packet. Send it up. */
786 while( (MEM
->rx_head
[entry
].flag
& RMD1_OWN
) == RMD1_OWN_HOST
) {
787 struct lance_rx_head
*head
= &(MEM
->rx_head
[entry
]);
788 int status
= head
->flag
;
790 if (status
!= (RMD1_ENP
|RMD1_STP
)) { /* There was an error. */
791 /* There is a tricky error noted by John Murphy,
792 <murf@perftech.com> to Russ Nelson: Even with
793 full-sized buffers it's possible for a jabber packet to use two
794 buffers, with only the last correctly noting the error. */
795 if (status
& RMD1_ENP
) /* Only count a general error at the */
796 dev
->stats
.rx_errors
++; /* end of a packet.*/
797 if (status
& RMD1_FRAM
) dev
->stats
.rx_frame_errors
++;
798 if (status
& RMD1_OFLO
) dev
->stats
.rx_over_errors
++;
799 if (status
& RMD1_CRC
) dev
->stats
.rx_crc_errors
++;
800 if (status
& RMD1_BUFF
) dev
->stats
.rx_fifo_errors
++;
801 head
->flag
&= (RMD1_ENP
|RMD1_STP
);
803 /* Malloc up new buffer, compatible with net-3. */
804 // short pkt_len = head->msg_length;// & 0xfff;
805 short pkt_len
= (head
->msg_length
& 0xfff) - 4;
809 printk( "%s: Runt packet!\n", dev
->name
);
810 dev
->stats
.rx_errors
++;
813 skb
= dev_alloc_skb( pkt_len
+2 );
815 DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
818 dev
->stats
.rx_dropped
++;
819 head
->msg_length
= 0;
820 head
->flag
|= RMD1_OWN_CHIP
;
821 lp
->new_rx
= (lp
->new_rx
+1) &
826 if (lance_debug
>= 3) {
827 u_char
*data
= PKTBUF_ADDR(head
);
828 printk("%s: RX pkt %d type 0x%04x"
830 dev
->name
, lp
->new_tx
, ((u_short
*)data
)[6],
833 printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
835 data
[15], data
[16], data
[17], data
[18],
836 data
[19], data
[20], data
[21], data
[22],
840 if (lance_debug
>= 3) {
841 u_char
*data
= PKTBUF_ADDR(head
);
842 printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev
->name
, entry
, ((u_short
*)data
)[6], pkt_len
);
846 skb_reserve( skb
, 2 ); /* 16 byte align */
847 skb_put( skb
, pkt_len
); /* Make room */
848 skb_copy_to_linear_data(skb
,
852 skb
->protocol
= eth_type_trans( skb
, dev
);
854 dev
->stats
.rx_packets
++;
855 dev
->stats
.rx_bytes
+= pkt_len
;
859 // head->buf_length = -PKT_BUF_SZ | 0xf000;
860 head
->msg_length
= 0;
861 head
->flag
= RMD1_OWN_CHIP
;
863 entry
= lp
->new_rx
= (lp
->new_rx
+1) & RX_RING_MOD_MASK
;
866 /* From lance.c (Donald Becker): */
867 /* We should check that at least two ring entries are free.
868 If not, we should free one and mark stats->rx_dropped++. */
874 static int lance_close( struct net_device
*dev
)
876 struct lance_private
*lp
= netdev_priv(dev
);
878 netif_stop_queue(dev
);
882 DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
885 /* We stop the LANCE here -- it occasionally polls
886 memory if we don't. */
892 /* Set or clear the multicast filter for this adaptor.
893 num_addrs == -1 Promiscuous mode, receive all packets
894 num_addrs == 0 Normal mode, clear multicast list
895 num_addrs > 0 Multicast mode, receive normal and MC packets, and do
896 best-effort filtering.
899 /* completely untested on a sun3 */
900 static void set_multicast_list( struct net_device
*dev
)
902 struct lance_private
*lp
= netdev_priv(dev
);
904 if(netif_queue_stopped(dev
))
905 /* Only possible if board is already started */
908 /* We take the simple way out and always enable promiscuous mode. */
909 DREG
= CSR0_STOP
; /* Temporarily stop the lance. */
911 if (dev
->flags
& IFF_PROMISC
) {
912 /* Log any net taps. */
913 DPRINTK( 3, ( "%s: Promiscuous mode enabled.\n", dev
->name
));
914 REGA( CSR15
) = 0x8000; /* Set promiscuous mode */
916 short multicast_table
[4];
917 int num_addrs
= netdev_mc_count(dev
);
919 /* We don't use the multicast table, but rely on upper-layer
921 memset( multicast_table
, (num_addrs
== 0) ? 0 : -1,
922 sizeof(multicast_table
) );
923 for( i
= 0; i
< 4; i
++ )
924 REGA( CSR8
+i
) = multicast_table
[i
];
925 REGA( CSR15
) = 0; /* Unset promiscuous mode */
929 * Always set BSWP after a STOP as STOP puts it back into
930 * little endian mode.
932 REGA( CSR3
) = CSR3_BSWP
;
934 /* Resume normal operation and reset AREG to CSR0 */
935 REGA( CSR0
) = CSR0_IDON
| CSR0_INEA
| CSR0_STRT
;
941 static struct net_device
*sun3lance_dev
;
943 int __init
init_module(void)
945 sun3lance_dev
= sun3lance_probe(-1);
946 if (IS_ERR(sun3lance_dev
))
947 return PTR_ERR(sun3lance_dev
);
951 void __exit
cleanup_module(void)
953 unregister_netdev(sun3lance_dev
);
955 iounmap((void __iomem
*)sun3lance_dev
->base_addr
);
957 free_netdev(sun3lance_dev
);