drivers/net/ethernet/intel/e1000/e1000_hw.h

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2006 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 /* e1000_hw.h
  30  * Structures, enums, and macros for the MAC
  31  */
  32
  33 #ifndef _E1000_HW_H_
  34 #define _E1000_HW_H_
  35
  36 #include "e1000_osdep.h"
  37
  38
  39 /* Forward declarations of structures used by the shared code */
  40 struct e1000_hw;
  41 struct e1000_hw_stats;
  42
  43 /* Enumerated types specific to the e1000 hardware */
  44 /* Media Access Controllers */
  45 typedef enum {
  46         e1000_undefined = 0,
  47         e1000_82542_rev2_0,
  48         e1000_82542_rev2_1,
  49         e1000_82543,
  50         e1000_82544,
  51         e1000_82540,
  52         e1000_82545,
  53         e1000_82545_rev_3,
  54         e1000_82546,
  55         e1000_ce4100,
  56         e1000_82546_rev_3,
  57         e1000_82541,
  58         e1000_82541_rev_2,
  59         e1000_82547,
  60         e1000_82547_rev_2,
  61         e1000_num_macs
  62 } e1000_mac_type;
  63
  64 typedef enum {
  65         e1000_eeprom_uninitialized = 0,
  66         e1000_eeprom_spi,
  67         e1000_eeprom_microwire,
  68         e1000_eeprom_flash,
  69         e1000_eeprom_none,      /* No NVM support */
  70         e1000_num_eeprom_types
  71 } e1000_eeprom_type;
  72
  73 /* Media Types */
  74 typedef enum {
  75         e1000_media_type_copper = 0,
  76         e1000_media_type_fiber = 1,
  77         e1000_media_type_internal_serdes = 2,
  78         e1000_num_media_types
  79 } e1000_media_type;
  80
  81 typedef enum {
  82         e1000_10_half = 0,
  83         e1000_10_full = 1,
  84         e1000_100_half = 2,
  85         e1000_100_full = 3
  86 } e1000_speed_duplex_type;
  87
  88 /* Flow Control Settings */
  89 typedef enum {
  90         E1000_FC_NONE = 0,
  91         E1000_FC_RX_PAUSE = 1,
  92         E1000_FC_TX_PAUSE = 2,
  93         E1000_FC_FULL = 3,
  94         E1000_FC_DEFAULT = 0xFF
  95 } e1000_fc_type;
  96
  97 struct e1000_shadow_ram {
  98         u16 eeprom_word;
  99         bool modified;
 100 };
 101
 102 /* PCI bus types */
 103 typedef enum {
 104         e1000_bus_type_unknown = 0,
 105         e1000_bus_type_pci,
 106         e1000_bus_type_pcix,
 107         e1000_bus_type_reserved
 108 } e1000_bus_type;
 109
 110 /* PCI bus speeds */
 111 typedef enum {
 112         e1000_bus_speed_unknown = 0,
 113         e1000_bus_speed_33,
 114         e1000_bus_speed_66,
 115         e1000_bus_speed_100,
 116         e1000_bus_speed_120,
 117         e1000_bus_speed_133,
 118         e1000_bus_speed_reserved
 119 } e1000_bus_speed;
 120
 121 /* PCI bus widths */
 122 typedef enum {
 123         e1000_bus_width_unknown = 0,
 124         e1000_bus_width_32,
 125         e1000_bus_width_64,
 126         e1000_bus_width_reserved
 127 } e1000_bus_width;
 128
 129 /* PHY status info structure and supporting enums */
 130 typedef enum {
 131         e1000_cable_length_50 = 0,
 132         e1000_cable_length_50_80,
 133         e1000_cable_length_80_110,
 134         e1000_cable_length_110_140,
 135         e1000_cable_length_140,
 136         e1000_cable_length_undefined = 0xFF
 137 } e1000_cable_length;
 138
 139 typedef enum {
 140         e1000_gg_cable_length_60 = 0,
 141         e1000_gg_cable_length_60_115 = 1,
 142         e1000_gg_cable_length_115_150 = 2,
 143         e1000_gg_cable_length_150 = 4
 144 } e1000_gg_cable_length;
 145
 146 typedef enum {
 147         e1000_igp_cable_length_10 = 10,
 148         e1000_igp_cable_length_20 = 20,
 149         e1000_igp_cable_length_30 = 30,
 150         e1000_igp_cable_length_40 = 40,
 151         e1000_igp_cable_length_50 = 50,
 152         e1000_igp_cable_length_60 = 60,
 153         e1000_igp_cable_length_70 = 70,
 154         e1000_igp_cable_length_80 = 80,
 155         e1000_igp_cable_length_90 = 90,
 156         e1000_igp_cable_length_100 = 100,
 157         e1000_igp_cable_length_110 = 110,
 158         e1000_igp_cable_length_115 = 115,
 159         e1000_igp_cable_length_120 = 120,
 160         e1000_igp_cable_length_130 = 130,
 161         e1000_igp_cable_length_140 = 140,
 162         e1000_igp_cable_length_150 = 150,
 163         e1000_igp_cable_length_160 = 160,
 164         e1000_igp_cable_length_170 = 170,
 165         e1000_igp_cable_length_180 = 180
 166 } e1000_igp_cable_length;
 167
 168 typedef enum {
 169         e1000_10bt_ext_dist_enable_normal = 0,
 170         e1000_10bt_ext_dist_enable_lower,
 171         e1000_10bt_ext_dist_enable_undefined = 0xFF
 172 } e1000_10bt_ext_dist_enable;
 173
 174 typedef enum {
 175         e1000_rev_polarity_normal = 0,
 176         e1000_rev_polarity_reversed,
 177         e1000_rev_polarity_undefined = 0xFF
 178 } e1000_rev_polarity;
 179
 180 typedef enum {
 181         e1000_downshift_normal = 0,
 182         e1000_downshift_activated,
 183         e1000_downshift_undefined = 0xFF
 184 } e1000_downshift;
 185
 186 typedef enum {
 187         e1000_smart_speed_default = 0,
 188         e1000_smart_speed_on,
 189         e1000_smart_speed_off
 190 } e1000_smart_speed;
 191
 192 typedef enum {
 193         e1000_polarity_reversal_enabled = 0,
 194         e1000_polarity_reversal_disabled,
 195         e1000_polarity_reversal_undefined = 0xFF
 196 } e1000_polarity_reversal;
 197
 198 typedef enum {
 199         e1000_auto_x_mode_manual_mdi = 0,
 200         e1000_auto_x_mode_manual_mdix,
 201         e1000_auto_x_mode_auto1,
 202         e1000_auto_x_mode_auto2,
 203         e1000_auto_x_mode_undefined = 0xFF
 204 } e1000_auto_x_mode;
 205
 206 typedef enum {
 207         e1000_1000t_rx_status_not_ok = 0,
 208         e1000_1000t_rx_status_ok,
 209         e1000_1000t_rx_status_undefined = 0xFF
 210 } e1000_1000t_rx_status;
 211
 212 typedef enum {
 213         e1000_phy_m88 = 0,
 214         e1000_phy_igp,
 215         e1000_phy_8211,
 216         e1000_phy_8201,
 217         e1000_phy_undefined = 0xFF
 218 } e1000_phy_type;
 219
 220 typedef enum {
 221         e1000_ms_hw_default = 0,
 222         e1000_ms_force_master,
 223         e1000_ms_force_slave,
 224         e1000_ms_auto
 225 } e1000_ms_type;
 226
 227 typedef enum {
 228         e1000_ffe_config_enabled = 0,
 229         e1000_ffe_config_active,
 230         e1000_ffe_config_blocked
 231 } e1000_ffe_config;
 232
 233 typedef enum {
 234         e1000_dsp_config_disabled = 0,
 235         e1000_dsp_config_enabled,
 236         e1000_dsp_config_activated,
 237         e1000_dsp_config_undefined = 0xFF
 238 } e1000_dsp_config;
 239
 240 struct e1000_phy_info {
 241         e1000_cable_length cable_length;
 242         e1000_10bt_ext_dist_enable extended_10bt_distance;
 243         e1000_rev_polarity cable_polarity;
 244         e1000_downshift downshift;
 245         e1000_polarity_reversal polarity_correction;
 246         e1000_auto_x_mode mdix_mode;
 247         e1000_1000t_rx_status local_rx;
 248         e1000_1000t_rx_status remote_rx;
 249 };
 250
 251 struct e1000_phy_stats {
 252         u32 idle_errors;
 253         u32 receive_errors;
 254 };
 255
 256 struct e1000_eeprom_info {
 257         e1000_eeprom_type type;
 258         u16 word_size;
 259         u16 opcode_bits;
 260         u16 address_bits;
 261         u16 delay_usec;
 262         u16 page_size;
 263 };
 264
 265 /* Flex ASF Information */
 266 #define E1000_HOST_IF_MAX_SIZE  2048
 267
 268 typedef enum {
 269         e1000_byte_align = 0,
 270         e1000_word_align = 1,
 271         e1000_dword_align = 2
 272 } e1000_align_type;
 273
 274 /* Error Codes */
 275 #define E1000_SUCCESS      0
 276 #define E1000_ERR_EEPROM   1
 277 #define E1000_ERR_PHY      2
 278 #define E1000_ERR_CONFIG   3
 279 #define E1000_ERR_PARAM    4
 280 #define E1000_ERR_MAC_TYPE 5
 281 #define E1000_ERR_PHY_TYPE 6
 282 #define E1000_ERR_RESET   9
 283 #define E1000_ERR_MASTER_REQUESTS_PENDING 10
 284 #define E1000_ERR_HOST_INTERFACE_COMMAND 11
 285 #define E1000_BLK_PHY_RESET   12
 286
 287 #define E1000_BYTE_SWAP_WORD(_value) ((((_value) & 0x00ff) << 8) | \
 288                                      (((_value) & 0xff00) >> 8))
 289
 290 /* Function prototypes */
 291 /* Initialization */
 292 s32 e1000_reset_hw(struct e1000_hw *hw);
 293 s32 e1000_init_hw(struct e1000_hw *hw);
 294 s32 e1000_set_mac_type(struct e1000_hw *hw);
 295 void e1000_set_media_type(struct e1000_hw *hw);
 296
 297 /* Link Configuration */
 298 s32 e1000_setup_link(struct e1000_hw *hw);
 299 s32 e1000_phy_setup_autoneg(struct e1000_hw *hw);
 300 void e1000_config_collision_dist(struct e1000_hw *hw);
 301 s32 e1000_check_for_link(struct e1000_hw *hw);
 302 s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 * speed, u16 * duplex);
 303 s32 e1000_force_mac_fc(struct e1000_hw *hw);
 304
 305 /* PHY */
 306 s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 * phy_data);
 307 s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 reg_addr, u16 data);
 308 s32 e1000_phy_hw_reset(struct e1000_hw *hw);
 309 s32 e1000_phy_reset(struct e1000_hw *hw);
 310 s32 e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info);
 311 s32 e1000_validate_mdi_setting(struct e1000_hw *hw);
 312
 313 /* EEPROM Functions */
 314 s32 e1000_init_eeprom_params(struct e1000_hw *hw);
 315
 316 /* MNG HOST IF functions */
 317 u32 e1000_enable_mng_pass_thru(struct e1000_hw *hw);
 318
 319 #define E1000_MNG_DHCP_TX_PAYLOAD_CMD   64
 320 #define E1000_HI_MAX_MNG_DATA_LENGTH    0x6F8   /* Host Interface data length */
 321
 322 #define E1000_MNG_DHCP_COMMAND_TIMEOUT  10      /* Time in ms to process MNG command */
 323 #define E1000_MNG_DHCP_COOKIE_OFFSET    0x6F0   /* Cookie offset */
 324 #define E1000_MNG_DHCP_COOKIE_LENGTH    0x10    /* Cookie length */
 325 #define E1000_MNG_IAMT_MODE             0x3
 326 #define E1000_MNG_ICH_IAMT_MODE         0x2
 327 #define E1000_IAMT_SIGNATURE            0x544D4149      /* Intel(R) Active Management Technology signature */
 328
 329 #define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1        /* DHCP parsing enabled */
 330 #define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT    0x2        /* DHCP parsing enabled */
 331 #define E1000_VFTA_ENTRY_SHIFT                       0x5
 332 #define E1000_VFTA_ENTRY_MASK                        0x7F
 333 #define E1000_VFTA_ENTRY_BIT_SHIFT_MASK              0x1F
 334
 335 struct e1000_host_mng_command_header {
 336         u8 command_id;
 337         u8 checksum;
 338         u16 reserved1;
 339         u16 reserved2;
 340         u16 command_length;
 341 };
 342
 343 struct e1000_host_mng_command_info {
 344         struct e1000_host_mng_command_header command_header;    /* Command Head/Command Result Head has 4 bytes */
 345         u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH];  /* Command data can length 0..0x658 */
 346 };
 347 #ifdef __BIG_ENDIAN
 348 struct e1000_host_mng_dhcp_cookie {
 349         u32 signature;
 350         u16 vlan_id;
 351         u8 reserved0;
 352         u8 status;
 353         u32 reserved1;
 354         u8 checksum;
 355         u8 reserved3;
 356         u16 reserved2;
 357 };
 358 #else
 359 struct e1000_host_mng_dhcp_cookie {
 360         u32 signature;
 361         u8 status;
 362         u8 reserved0;
 363         u16 vlan_id;
 364         u32 reserved1;
 365         u16 reserved2;
 366         u8 reserved3;
 367         u8 checksum;
 368 };
 369 #endif
 370
 371 bool e1000_check_mng_mode(struct e1000_hw *hw);
 372 s32 e1000_read_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
 373 s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw);
 374 s32 e1000_update_eeprom_checksum(struct e1000_hw *hw);
 375 s32 e1000_write_eeprom(struct e1000_hw *hw, u16 reg, u16 words, u16 * data);
 376 s32 e1000_read_mac_addr(struct e1000_hw *hw);
 377
 378 /* Filters (multicast, vlan, receive) */
 379 u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 * mc_addr);
 380 void e1000_mta_set(struct e1000_hw *hw, u32 hash_value);
 381 void e1000_rar_set(struct e1000_hw *hw, u8 * mc_addr, u32 rar_index);
 382 void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value);
 383
 384 /* LED functions */
 385 s32 e1000_setup_led(struct e1000_hw *hw);
 386 s32 e1000_cleanup_led(struct e1000_hw *hw);
 387 s32 e1000_led_on(struct e1000_hw *hw);
 388 s32 e1000_led_off(struct e1000_hw *hw);
 389 s32 e1000_blink_led_start(struct e1000_hw *hw);
 390
 391 /* Adaptive IFS Functions */
 392
 393 /* Everything else */
 394 void e1000_reset_adaptive(struct e1000_hw *hw);
 395 void e1000_update_adaptive(struct e1000_hw *hw);
 396 void e1000_tbi_adjust_stats(struct e1000_hw *hw, struct e1000_hw_stats *stats,
 397                             u32 frame_len, u8 * mac_addr);
 398 void e1000_get_bus_info(struct e1000_hw *hw);
 399 void e1000_pci_set_mwi(struct e1000_hw *hw);
 400 void e1000_pci_clear_mwi(struct e1000_hw *hw);
 401 void e1000_pcix_set_mmrbc(struct e1000_hw *hw, int mmrbc);
 402 int e1000_pcix_get_mmrbc(struct e1000_hw *hw);
 403 /* Port I/O is only supported on 82544 and newer */
 404 void e1000_io_write(struct e1000_hw *hw, unsigned long port, u32 value);
 405
 406 #define E1000_READ_REG_IO(a, reg) \
 407     e1000_read_reg_io((a), E1000_##reg)
 408 #define E1000_WRITE_REG_IO(a, reg, val) \
 409     e1000_write_reg_io((a), E1000_##reg, val)
 410
 411 /* PCI Device IDs */
 412 #define E1000_DEV_ID_82542               0x1000
 413 #define E1000_DEV_ID_82543GC_FIBER       0x1001
 414 #define E1000_DEV_ID_82543GC_COPPER      0x1004
 415 #define E1000_DEV_ID_82544EI_COPPER      0x1008
 416 #define E1000_DEV_ID_82544EI_FIBER       0x1009
 417 #define E1000_DEV_ID_82544GC_COPPER      0x100C
 418 #define E1000_DEV_ID_82544GC_LOM         0x100D
 419 #define E1000_DEV_ID_82540EM             0x100E
 420 #define E1000_DEV_ID_82540EM_LOM         0x1015
 421 #define E1000_DEV_ID_82540EP_LOM         0x1016
 422 #define E1000_DEV_ID_82540EP             0x1017
 423 #define E1000_DEV_ID_82540EP_LP          0x101E
 424 #define E1000_DEV_ID_82545EM_COPPER      0x100F
 425 #define E1000_DEV_ID_82545EM_FIBER       0x1011
 426 #define E1000_DEV_ID_82545GM_COPPER      0x1026
 427 #define E1000_DEV_ID_82545GM_FIBER       0x1027
 428 #define E1000_DEV_ID_82545GM_SERDES      0x1028
 429 #define E1000_DEV_ID_82546EB_COPPER      0x1010
 430 #define E1000_DEV_ID_82546EB_FIBER       0x1012
 431 #define E1000_DEV_ID_82546EB_QUAD_COPPER 0x101D
 432 #define E1000_DEV_ID_82541EI             0x1013
 433 #define E1000_DEV_ID_82541EI_MOBILE      0x1018
 434 #define E1000_DEV_ID_82541ER_LOM         0x1014
 435 #define E1000_DEV_ID_82541ER             0x1078
 436 #define E1000_DEV_ID_82547GI             0x1075
 437 #define E1000_DEV_ID_82541GI             0x1076
 438 #define E1000_DEV_ID_82541GI_MOBILE      0x1077
 439 #define E1000_DEV_ID_82541GI_LF          0x107C
 440 #define E1000_DEV_ID_82546GB_COPPER      0x1079
 441 #define E1000_DEV_ID_82546GB_FIBER       0x107A
 442 #define E1000_DEV_ID_82546GB_SERDES      0x107B
 443 #define E1000_DEV_ID_82546GB_PCIE        0x108A
 444 #define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099
 445 #define E1000_DEV_ID_82547EI             0x1019
 446 #define E1000_DEV_ID_82547EI_MOBILE      0x101A
 447 #define E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3 0x10B5
 448 #define E1000_DEV_ID_INTEL_CE4100_GBE    0x2E6E
 449
 450 #define NODE_ADDRESS_SIZE 6
 451
 452 /* MAC decode size is 128K - This is the size of BAR0 */
 453 #define MAC_DECODE_SIZE (128 * 1024)
 454
 455 #define E1000_82542_2_0_REV_ID 2
 456 #define E1000_82542_2_1_REV_ID 3
 457 #define E1000_REVISION_0       0
 458 #define E1000_REVISION_1       1
 459 #define E1000_REVISION_2       2
 460 #define E1000_REVISION_3       3
 461
 462 #define SPEED_10    10
 463 #define SPEED_100   100
 464 #define SPEED_1000  1000
 465 #define HALF_DUPLEX 1
 466 #define FULL_DUPLEX 2
 467
 468 /* The sizes (in bytes) of a ethernet packet */
 469 #define ENET_HEADER_SIZE             14
 470 #define MINIMUM_ETHERNET_FRAME_SIZE  64 /* With FCS */
 471 #define ETHERNET_FCS_SIZE            4
 472 #define MINIMUM_ETHERNET_PACKET_SIZE \
 473     (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE)
 474 #define CRC_LENGTH                   ETHERNET_FCS_SIZE
 475 #define MAX_JUMBO_FRAME_SIZE         0x3F00
 476
 477 /* 802.1q VLAN Packet Sizes */
 478 #define VLAN_TAG_SIZE  4        /* 802.3ac tag (not DMAed) */
 479
 480 /* Ethertype field values */
 481 #define ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.3ac packet */
 482 #define ETHERNET_IP_TYPE        0x0800  /* IP packets */
 483 #define ETHERNET_ARP_TYPE       0x0806  /* Address Resolution Protocol (ARP) */
 484
 485 /* Packet Header defines */
 486 #define IP_PROTOCOL_TCP    6
 487 #define IP_PROTOCOL_UDP    0x11
 488
 489 /* This defines the bits that are set in the Interrupt Mask
 490  * Set/Read Register.  Each bit is documented below:
 491  *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
 492  *   o RXSEQ  = Receive Sequence Error
 493  */
 494 #define POLL_IMS_ENABLE_MASK ( \
 495     E1000_IMS_RXDMT0 |         \
 496     E1000_IMS_RXSEQ)
 497
 498 /* This defines the bits that are set in the Interrupt Mask
 499  * Set/Read Register.  Each bit is documented below:
 500  *   o RXT0   = Receiver Timer Interrupt (ring 0)
 501  *   o TXDW   = Transmit Descriptor Written Back
 502  *   o RXDMT0 = Receive Descriptor Minimum Threshold hit (ring 0)
 503  *   o RXSEQ  = Receive Sequence Error
 504  *   o LSC    = Link Status Change
 505  */
 506 #define IMS_ENABLE_MASK ( \
 507     E1000_IMS_RXT0   |    \
 508     E1000_IMS_TXDW   |    \
 509     E1000_IMS_RXDMT0 |    \
 510     E1000_IMS_RXSEQ  |    \
 511     E1000_IMS_LSC)
 512
 513 /* Number of high/low register pairs in the RAR. The RAR (Receive Address
 514  * Registers) holds the directed and multicast addresses that we monitor. We
 515  * reserve one of these spots for our directed address, allowing us room for
 516  * E1000_RAR_ENTRIES - 1 multicast addresses.
 517  */
 518 #define E1000_RAR_ENTRIES 15
 519
 520 #define MIN_NUMBER_OF_DESCRIPTORS  8
 521 #define MAX_NUMBER_OF_DESCRIPTORS  0xFFF8
 522
 523 /* Receive Descriptor */
 524 struct e1000_rx_desc {
 525         __le64 buffer_addr;     /* Address of the descriptor's data buffer */
 526         __le16 length;          /* Length of data DMAed into data buffer */
 527         __le16 csum;            /* Packet checksum */
 528         u8 status;              /* Descriptor status */
 529         u8 errors;              /* Descriptor Errors */
 530         __le16 special;
 531 };
 532
 533 /* Receive Descriptor - Extended */
 534 union e1000_rx_desc_extended {
 535         struct {
 536                 __le64 buffer_addr;
 537                 __le64 reserved;
 538         } read;
 539         struct {
 540                 struct {
 541                         __le32 mrq;     /* Multiple Rx Queues */
 542                         union {
 543                                 __le32 rss;     /* RSS Hash */
 544                                 struct {
 545                                         __le16 ip_id;   /* IP id */
 546                                         __le16 csum;    /* Packet Checksum */
 547                                 } csum_ip;
 548                         } hi_dword;
 549                 } lower;
 550                 struct {
 551                         __le32 status_error;    /* ext status/error */
 552                         __le16 length;
 553                         __le16 vlan;    /* VLAN tag */
 554                 } upper;
 555         } wb;                   /* writeback */
 556 };
 557
 558 #define MAX_PS_BUFFERS 4
 559 /* Receive Descriptor - Packet Split */
 560 union e1000_rx_desc_packet_split {
 561         struct {
 562                 /* one buffer for protocol header(s), three data buffers */
 563                 __le64 buffer_addr[MAX_PS_BUFFERS];
 564         } read;
 565         struct {
 566                 struct {
 567                         __le32 mrq;     /* Multiple Rx Queues */
 568                         union {
 569                                 __le32 rss;     /* RSS Hash */
 570                                 struct {
 571                                         __le16 ip_id;   /* IP id */
 572                                         __le16 csum;    /* Packet Checksum */
 573                                 } csum_ip;
 574                         } hi_dword;
 575                 } lower;
 576                 struct {
 577                         __le32 status_error;    /* ext status/error */
 578                         __le16 length0; /* length of buffer 0 */
 579                         __le16 vlan;    /* VLAN tag */
 580                 } middle;
 581                 struct {
 582                         __le16 header_status;
 583                         __le16 length[3];       /* length of buffers 1-3 */
 584                 } upper;
 585                 __le64 reserved;
 586         } wb;                   /* writeback */
 587 };
 588
 589 /* Receive Descriptor bit definitions */
 590 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
 591 #define E1000_RXD_STAT_EOP      0x02    /* End of Packet */
 592 #define E1000_RXD_STAT_IXSM     0x04    /* Ignore checksum */
 593 #define E1000_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
 594 #define E1000_RXD_STAT_UDPCS    0x10    /* UDP xsum calculated */
 595 #define E1000_RXD_STAT_TCPCS    0x20    /* TCP xsum calculated */
 596 #define E1000_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
 597 #define E1000_RXD_STAT_PIF      0x80    /* passed in-exact filter */
 598 #define E1000_RXD_STAT_IPIDV    0x200   /* IP identification valid */
 599 #define E1000_RXD_STAT_UDPV     0x400   /* Valid UDP checksum */
 600 #define E1000_RXD_STAT_ACK      0x8000  /* ACK Packet indication */
 601 #define E1000_RXD_ERR_CE        0x01    /* CRC Error */
 602 #define E1000_RXD_ERR_SE        0x02    /* Symbol Error */
 603 #define E1000_RXD_ERR_SEQ       0x04    /* Sequence Error */
 604 #define E1000_RXD_ERR_CXE       0x10    /* Carrier Extension Error */
 605 #define E1000_RXD_ERR_TCPE      0x20    /* TCP/UDP Checksum Error */
 606 #define E1000_RXD_ERR_IPE       0x40    /* IP Checksum Error */
 607 #define E1000_RXD_ERR_RXE       0x80    /* Rx Data Error */
 608 #define E1000_RXD_SPC_VLAN_MASK 0x0FFF  /* VLAN ID is in lower 12 bits */
 609 #define E1000_RXD_SPC_PRI_MASK  0xE000  /* Priority is in upper 3 bits */
 610 #define E1000_RXD_SPC_PRI_SHIFT 13
 611 #define E1000_RXD_SPC_CFI_MASK  0x1000  /* CFI is bit 12 */
 612 #define E1000_RXD_SPC_CFI_SHIFT 12
 613
 614 #define E1000_RXDEXT_STATERR_CE    0x01000000
 615 #define E1000_RXDEXT_STATERR_SE    0x02000000
 616 #define E1000_RXDEXT_STATERR_SEQ   0x04000000
 617 #define E1000_RXDEXT_STATERR_CXE   0x10000000
 618 #define E1000_RXDEXT_STATERR_TCPE  0x20000000
 619 #define E1000_RXDEXT_STATERR_IPE   0x40000000
 620 #define E1000_RXDEXT_STATERR_RXE   0x80000000
 621
 622 #define E1000_RXDPS_HDRSTAT_HDRSP        0x00008000
 623 #define E1000_RXDPS_HDRSTAT_HDRLEN_MASK  0x000003FF
 624
 625 /* mask to determine if packets should be dropped due to frame errors */
 626 #define E1000_RXD_ERR_FRAME_ERR_MASK ( \
 627     E1000_RXD_ERR_CE  |                \
 628     E1000_RXD_ERR_SE  |                \
 629     E1000_RXD_ERR_SEQ |                \
 630     E1000_RXD_ERR_CXE |                \
 631     E1000_RXD_ERR_RXE)
 632
 633 /* Same mask, but for extended and packet split descriptors */
 634 #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \
 635     E1000_RXDEXT_STATERR_CE  |            \
 636     E1000_RXDEXT_STATERR_SE  |            \
 637     E1000_RXDEXT_STATERR_SEQ |            \
 638     E1000_RXDEXT_STATERR_CXE |            \
 639     E1000_RXDEXT_STATERR_RXE)
 640
 641 /* Transmit Descriptor */
 642 struct e1000_tx_desc {
 643         __le64 buffer_addr;     /* Address of the descriptor's data buffer */
 644         union {
 645                 __le32 data;
 646                 struct {
 647                         __le16 length;  /* Data buffer length */
 648                         u8 cso; /* Checksum offset */
 649                         u8 cmd; /* Descriptor control */
 650                 } flags;
 651         } lower;
 652         union {
 653                 __le32 data;
 654                 struct {
 655                         u8 status;      /* Descriptor status */
 656                         u8 css; /* Checksum start */
 657                         __le16 special;
 658                 } fields;
 659         } upper;
 660 };
 661
 662 /* Transmit Descriptor bit definitions */
 663 #define E1000_TXD_DTYP_D     0x00100000 /* Data Descriptor */
 664 #define E1000_TXD_DTYP_C     0x00000000 /* Context Descriptor */
 665 #define E1000_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
 666 #define E1000_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
 667 #define E1000_TXD_CMD_EOP    0x01000000 /* End of Packet */
 668 #define E1000_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
 669 #define E1000_TXD_CMD_IC     0x04000000 /* Insert Checksum */
 670 #define E1000_TXD_CMD_RS     0x08000000 /* Report Status */
 671 #define E1000_TXD_CMD_RPS    0x10000000 /* Report Packet Sent */
 672 #define E1000_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
 673 #define E1000_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
 674 #define E1000_TXD_CMD_IDE    0x80000000 /* Enable Tidv register */
 675 #define E1000_TXD_STAT_DD    0x00000001 /* Descriptor Done */
 676 #define E1000_TXD_STAT_EC    0x00000002 /* Excess Collisions */
 677 #define E1000_TXD_STAT_LC    0x00000004 /* Late Collisions */
 678 #define E1000_TXD_STAT_TU    0x00000008 /* Transmit underrun */
 679 #define E1000_TXD_CMD_TCP    0x01000000 /* TCP packet */
 680 #define E1000_TXD_CMD_IP     0x02000000 /* IP packet */
 681 #define E1000_TXD_CMD_TSE    0x04000000 /* TCP Seg enable */
 682 #define E1000_TXD_STAT_TC    0x00000004 /* Tx Underrun */
 683
 684 /* Offload Context Descriptor */
 685 struct e1000_context_desc {
 686         union {
 687                 __le32 ip_config;
 688                 struct {
 689                         u8 ipcss;       /* IP checksum start */
 690                         u8 ipcso;       /* IP checksum offset */
 691                         __le16 ipcse;   /* IP checksum end */
 692                 } ip_fields;
 693         } lower_setup;
 694         union {
 695                 __le32 tcp_config;
 696                 struct {
 697                         u8 tucss;       /* TCP checksum start */
 698                         u8 tucso;       /* TCP checksum offset */
 699                         __le16 tucse;   /* TCP checksum end */
 700                 } tcp_fields;
 701         } upper_setup;
 702         __le32 cmd_and_length;  /* */
 703         union {
 704                 __le32 data;
 705                 struct {
 706                         u8 status;      /* Descriptor status */
 707                         u8 hdr_len;     /* Header length */
 708                         __le16 mss;     /* Maximum segment size */
 709                 } fields;
 710         } tcp_seg_setup;
 711 };
 712
 713 /* Offload data descriptor */
 714 struct e1000_data_desc {
 715         __le64 buffer_addr;     /* Address of the descriptor's buffer address */
 716         union {
 717                 __le32 data;
 718                 struct {
 719                         __le16 length;  /* Data buffer length */
 720                         u8 typ_len_ext; /* */
 721                         u8 cmd; /* */
 722                 } flags;
 723         } lower;
 724         union {
 725                 __le32 data;
 726                 struct {
 727                         u8 status;      /* Descriptor status */
 728                         u8 popts;       /* Packet Options */
 729                         __le16 special; /* */
 730                 } fields;
 731         } upper;
 732 };
 733
 734 /* Filters */
 735 #define E1000_NUM_UNICAST          16   /* Unicast filter entries */
 736 #define E1000_MC_TBL_SIZE          128  /* Multicast Filter Table (4096 bits) */
 737 #define E1000_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
 738
 739 /* Receive Address Register */
 740 struct e1000_rar {
 741         volatile __le32 low;    /* receive address low */
 742         volatile __le32 high;   /* receive address high */
 743 };
 744
 745 /* Number of entries in the Multicast Table Array (MTA). */
 746 #define E1000_NUM_MTA_REGISTERS 128
 747
 748 /* IPv4 Address Table Entry */
 749 struct e1000_ipv4_at_entry {
 750         volatile u32 ipv4_addr; /* IP Address (RW) */
 751         volatile u32 reserved;
 752 };
 753
 754 /* Four wakeup IP addresses are supported */
 755 #define E1000_WAKEUP_IP_ADDRESS_COUNT_MAX 4
 756 #define E1000_IP4AT_SIZE                  E1000_WAKEUP_IP_ADDRESS_COUNT_MAX
 757 #define E1000_IP6AT_SIZE                  1
 758
 759 /* IPv6 Address Table Entry */
 760 struct e1000_ipv6_at_entry {
 761         volatile u8 ipv6_addr[16];
 762 };
 763
 764 /* Flexible Filter Length Table Entry */
 765 struct e1000_fflt_entry {
 766         volatile u32 length;    /* Flexible Filter Length (RW) */
 767         volatile u32 reserved;
 768 };
 769
 770 /* Flexible Filter Mask Table Entry */
 771 struct e1000_ffmt_entry {
 772         volatile u32 mask;      /* Flexible Filter Mask (RW) */
 773         volatile u32 reserved;
 774 };
 775
 776 /* Flexible Filter Value Table Entry */
 777 struct e1000_ffvt_entry {
 778         volatile u32 value;     /* Flexible Filter Value (RW) */
 779         volatile u32 reserved;
 780 };
 781
 782 /* Four Flexible Filters are supported */
 783 #define E1000_FLEXIBLE_FILTER_COUNT_MAX 4
 784
 785 /* Each Flexible Filter is at most 128 (0x80) bytes in length */
 786 #define E1000_FLEXIBLE_FILTER_SIZE_MAX  128
 787
 788 #define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX
 789 #define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
 790 #define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX
 791
 792 #define E1000_DISABLE_SERDES_LOOPBACK   0x0400
 793
 794 /* Register Set. (82543, 82544)
 795  *
 796  * Registers are defined to be 32 bits and  should be accessed as 32 bit values.
 797  * These registers are physically located on the NIC, but are mapped into the
 798  * host memory address space.
 799  *
 800  * RW - register is both readable and writable
 801  * RO - register is read only
 802  * WO - register is write only
 803  * R/clr - register is read only and is cleared when read
 804  * A - register array
 805  */
 806 #define E1000_CTRL     0x00000  /* Device Control - RW */
 807 #define E1000_CTRL_DUP 0x00004  /* Device Control Duplicate (Shadow) - RW */
 808 #define E1000_STATUS   0x00008  /* Device Status - RO */
 809 #define E1000_EECD     0x00010  /* EEPROM/Flash Control - RW */
 810 #define E1000_EERD     0x00014  /* EEPROM Read - RW */
 811 #define E1000_CTRL_EXT 0x00018  /* Extended Device Control - RW */
 812 #define E1000_FLA      0x0001C  /* Flash Access - RW */
 813 #define E1000_MDIC     0x00020  /* MDI Control - RW */
 814
 815 #define INTEL_CE_GBE_MDIO_RCOMP_BASE    (hw->ce4100_gbe_mdio_base_virt)
 816 #define E1000_MDIO_STS  (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0)
 817 #define E1000_MDIO_CMD  (INTEL_CE_GBE_MDIO_RCOMP_BASE + 4)
 818 #define E1000_MDIO_DRV  (INTEL_CE_GBE_MDIO_RCOMP_BASE + 8)
 819 #define E1000_MDC_CMD   (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0xC)
 820 #define E1000_RCOMP_CTL (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x20)
 821 #define E1000_RCOMP_STS (INTEL_CE_GBE_MDIO_RCOMP_BASE + 0x24)
 822
 823 #define E1000_SCTL     0x00024  /* SerDes Control - RW */
 824 #define E1000_FEXTNVM  0x00028  /* Future Extended NVM register */
 825 #define E1000_FCAL     0x00028  /* Flow Control Address Low - RW */
 826 #define E1000_FCAH     0x0002C  /* Flow Control Address High -RW */
 827 #define E1000_FCT      0x00030  /* Flow Control Type - RW */
 828 #define E1000_VET      0x00038  /* VLAN Ether Type - RW */
 829 #define E1000_ICR      0x000C0  /* Interrupt Cause Read - R/clr */
 830 #define E1000_ITR      0x000C4  /* Interrupt Throttling Rate - RW */
 831 #define E1000_ICS      0x000C8  /* Interrupt Cause Set - WO */
 832 #define E1000_IMS      0x000D0  /* Interrupt Mask Set - RW */
 833 #define E1000_IMC      0x000D8  /* Interrupt Mask Clear - WO */
 834 #define E1000_IAM      0x000E0  /* Interrupt Acknowledge Auto Mask */
 835
 836 /* Auxiliary Control Register. This register is CE4100 specific,
 837  * RMII/RGMII function is switched by this register - RW
 838  * Following are bits definitions of the Auxiliary Control Register
 839  */
 840 #define E1000_CTL_AUX  0x000E0
 841 #define E1000_CTL_AUX_END_SEL_SHIFT     10
 842 #define E1000_CTL_AUX_ENDIANESS_SHIFT   8
 843 #define E1000_CTL_AUX_RGMII_RMII_SHIFT  0
 844
 845 /* descriptor and packet transfer use CTL_AUX.ENDIANESS */
 846 #define E1000_CTL_AUX_DES_PKT   (0x0 << E1000_CTL_AUX_END_SEL_SHIFT)
 847 /* descriptor use CTL_AUX.ENDIANESS, packet use default */
 848 #define E1000_CTL_AUX_DES       (0x1 << E1000_CTL_AUX_END_SEL_SHIFT)
 849 /* descriptor use default, packet use CTL_AUX.ENDIANESS */
 850 #define E1000_CTL_AUX_PKT       (0x2 << E1000_CTL_AUX_END_SEL_SHIFT)
 851 /* all use CTL_AUX.ENDIANESS */
 852 #define E1000_CTL_AUX_ALL       (0x3 << E1000_CTL_AUX_END_SEL_SHIFT)
 853
 854 #define E1000_CTL_AUX_RGMII     (0x0 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
 855 #define E1000_CTL_AUX_RMII      (0x1 << E1000_CTL_AUX_RGMII_RMII_SHIFT)
 856
 857 /* LW little endian, Byte big endian */
 858 #define E1000_CTL_AUX_LWLE_BBE  (0x0 << E1000_CTL_AUX_ENDIANESS_SHIFT)
 859 #define E1000_CTL_AUX_LWLE_BLE  (0x1 << E1000_CTL_AUX_ENDIANESS_SHIFT)
 860 #define E1000_CTL_AUX_LWBE_BBE  (0x2 << E1000_CTL_AUX_ENDIANESS_SHIFT)
 861 #define E1000_CTL_AUX_LWBE_BLE  (0x3 << E1000_CTL_AUX_ENDIANESS_SHIFT)
 862
 863 #define E1000_RCTL     0x00100  /* RX Control - RW */
 864 #define E1000_RDTR1    0x02820  /* RX Delay Timer (1) - RW */
 865 #define E1000_RDBAL1   0x02900  /* RX Descriptor Base Address Low (1) - RW */
 866 #define E1000_RDBAH1   0x02904  /* RX Descriptor Base Address High (1) - RW */
 867 #define E1000_RDLEN1   0x02908  /* RX Descriptor Length (1) - RW */
 868 #define E1000_RDH1     0x02910  /* RX Descriptor Head (1) - RW */
 869 #define E1000_RDT1     0x02918  /* RX Descriptor Tail (1) - RW */
 870 #define E1000_FCTTV    0x00170  /* Flow Control Transmit Timer Value - RW */
 871 #define E1000_TXCW     0x00178  /* TX Configuration Word - RW */
 872 #define E1000_RXCW     0x00180  /* RX Configuration Word - RO */
 873 #define E1000_TCTL     0x00400  /* TX Control - RW */
 874 #define E1000_TCTL_EXT 0x00404  /* Extended TX Control - RW */
 875 #define E1000_TIPG     0x00410  /* TX Inter-packet gap -RW */
 876 #define E1000_TBT      0x00448  /* TX Burst Timer - RW */
 877 #define E1000_AIT      0x00458  /* Adaptive Interframe Spacing Throttle - RW */
 878 #define E1000_LEDCTL   0x00E00  /* LED Control - RW */
 879 #define E1000_EXTCNF_CTRL  0x00F00      /* Extended Configuration Control */
 880 #define E1000_EXTCNF_SIZE  0x00F08      /* Extended Configuration Size */
 881 #define E1000_PHY_CTRL     0x00F10      /* PHY Control Register in CSR */
 882 #define FEXTNVM_SW_CONFIG  0x0001
 883 #define E1000_PBA      0x01000  /* Packet Buffer Allocation - RW */
 884 #define E1000_PBS      0x01008  /* Packet Buffer Size */
 885 #define E1000_EEMNGCTL 0x01010  /* MNG EEprom Control */
 886 #define E1000_FLASH_UPDATES 1000
 887 #define E1000_EEARBC   0x01024  /* EEPROM Auto Read Bus Control */
 888 #define E1000_FLASHT   0x01028  /* FLASH Timer Register */
 889 #define E1000_EEWR     0x0102C  /* EEPROM Write Register - RW */
 890 #define E1000_FLSWCTL  0x01030  /* FLASH control register */
 891 #define E1000_FLSWDATA 0x01034  /* FLASH data register */
 892 #define E1000_FLSWCNT  0x01038  /* FLASH Access Counter */
 893 #define E1000_FLOP     0x0103C  /* FLASH Opcode Register */
 894 #define E1000_ERT      0x02008  /* Early Rx Threshold - RW */
 895 #define E1000_FCRTL    0x02160  /* Flow Control Receive Threshold Low - RW */
 896 #define E1000_FCRTH    0x02168  /* Flow Control Receive Threshold High - RW */
 897 #define E1000_PSRCTL   0x02170  /* Packet Split Receive Control - RW */
 898 #define E1000_RDBAL    0x02800  /* RX Descriptor Base Address Low - RW */
 899 #define E1000_RDBAH    0x02804  /* RX Descriptor Base Address High - RW */
 900 #define E1000_RDLEN    0x02808  /* RX Descriptor Length - RW */
 901 #define E1000_RDH      0x02810  /* RX Descriptor Head - RW */
 902 #define E1000_RDT      0x02818  /* RX Descriptor Tail - RW */
 903 #define E1000_RDTR     0x02820  /* RX Delay Timer - RW */
 904 #define E1000_RDBAL0   E1000_RDBAL      /* RX Desc Base Address Low (0) - RW */
 905 #define E1000_RDBAH0   E1000_RDBAH      /* RX Desc Base Address High (0) - RW */
 906 #define E1000_RDLEN0   E1000_RDLEN      /* RX Desc Length (0) - RW */
 907 #define E1000_RDH0     E1000_RDH        /* RX Desc Head (0) - RW */
 908 #define E1000_RDT0     E1000_RDT        /* RX Desc Tail (0) - RW */
 909 #define E1000_RDTR0    E1000_RDTR       /* RX Delay Timer (0) - RW */
 910 #define E1000_RXDCTL   0x02828  /* RX Descriptor Control queue 0 - RW */
 911 #define E1000_RXDCTL1  0x02928  /* RX Descriptor Control queue 1 - RW */
 912 #define E1000_RADV     0x0282C  /* RX Interrupt Absolute Delay Timer - RW */
 913 #define E1000_RSRPD    0x02C00  /* RX Small Packet Detect - RW */
 914 #define E1000_RAID     0x02C08  /* Receive Ack Interrupt Delay - RW */
 915 #define E1000_TXDMAC   0x03000  /* TX DMA Control - RW */
 916 #define E1000_KABGTXD  0x03004  /* AFE Band Gap Transmit Ref Data */
 917 #define E1000_TDFH     0x03410  /* TX Data FIFO Head - RW */
 918 #define E1000_TDFT     0x03418  /* TX Data FIFO Tail - RW */
 919 #define E1000_TDFHS    0x03420  /* TX Data FIFO Head Saved - RW */
 920 #define E1000_TDFTS    0x03428  /* TX Data FIFO Tail Saved - RW */
 921 #define E1000_TDFPC    0x03430  /* TX Data FIFO Packet Count - RW */
 922 #define E1000_TDBAL    0x03800  /* TX Descriptor Base Address Low - RW */
 923 #define E1000_TDBAH    0x03804  /* TX Descriptor Base Address High - RW */
 924 #define E1000_TDLEN    0x03808  /* TX Descriptor Length - RW */
 925 #define E1000_TDH      0x03810  /* TX Descriptor Head - RW */
 926 #define E1000_TDT      0x03818  /* TX Descripotr Tail - RW */
 927 #define E1000_TIDV     0x03820  /* TX Interrupt Delay Value - RW */
 928 #define E1000_TXDCTL   0x03828  /* TX Descriptor Control - RW */
 929 #define E1000_TADV     0x0382C  /* TX Interrupt Absolute Delay Val - RW */
 930 #define E1000_TSPMT    0x03830  /* TCP Segmentation PAD & Min Threshold - RW */
 931 #define E1000_TARC0    0x03840  /* TX Arbitration Count (0) */
 932 #define E1000_TDBAL1   0x03900  /* TX Desc Base Address Low (1) - RW */
 933 #define E1000_TDBAH1   0x03904  /* TX Desc Base Address High (1) - RW */
 934 #define E1000_TDLEN1   0x03908  /* TX Desc Length (1) - RW */
 935 #define E1000_TDH1     0x03910  /* TX Desc Head (1) - RW */
 936 #define E1000_TDT1     0x03918  /* TX Desc Tail (1) - RW */
 937 #define E1000_TXDCTL1  0x03928  /* TX Descriptor Control (1) - RW */
 938 #define E1000_TARC1    0x03940  /* TX Arbitration Count (1) */
 939 #define E1000_CRCERRS  0x04000  /* CRC Error Count - R/clr */
 940 #define E1000_ALGNERRC 0x04004  /* Alignment Error Count - R/clr */
 941 #define E1000_SYMERRS  0x04008  /* Symbol Error Count - R/clr */
 942 #define E1000_RXERRC   0x0400C  /* Receive Error Count - R/clr */
 943 #define E1000_MPC      0x04010  /* Missed Packet Count - R/clr */
 944 #define E1000_SCC      0x04014  /* Single Collision Count - R/clr */
 945 #define E1000_ECOL     0x04018  /* Excessive Collision Count - R/clr */
 946 #define E1000_MCC      0x0401C  /* Multiple Collision Count - R/clr */
 947 #define E1000_LATECOL  0x04020  /* Late Collision Count - R/clr */
 948 #define E1000_COLC     0x04028  /* Collision Count - R/clr */
 949 #define E1000_DC       0x04030  /* Defer Count - R/clr */
 950 #define E1000_TNCRS    0x04034  /* TX-No CRS - R/clr */
 951 #define E1000_SEC      0x04038  /* Sequence Error Count - R/clr */
 952 #define E1000_CEXTERR  0x0403C  /* Carrier Extension Error Count - R/clr */
 953 #define E1000_RLEC     0x04040  /* Receive Length Error Count - R/clr */
 954 #define E1000_XONRXC   0x04048  /* XON RX Count - R/clr */
 955 #define E1000_XONTXC   0x0404C  /* XON TX Count - R/clr */
 956 #define E1000_XOFFRXC  0x04050  /* XOFF RX Count - R/clr */
 957 #define E1000_XOFFTXC  0x04054  /* XOFF TX Count - R/clr */
 958 #define E1000_FCRUC    0x04058  /* Flow Control RX Unsupported Count- R/clr */
 959 #define E1000_PRC64    0x0405C  /* Packets RX (64 bytes) - R/clr */
 960 #define E1000_PRC127   0x04060  /* Packets RX (65-127 bytes) - R/clr */
 961 #define E1000_PRC255   0x04064  /* Packets RX (128-255 bytes) - R/clr */
 962 #define E1000_PRC511   0x04068  /* Packets RX (255-511 bytes) - R/clr */
 963 #define E1000_PRC1023  0x0406C  /* Packets RX (512-1023 bytes) - R/clr */
 964 #define E1000_PRC1522  0x04070  /* Packets RX (1024-1522 bytes) - R/clr */
 965 #define E1000_GPRC     0x04074  /* Good Packets RX Count - R/clr */
 966 #define E1000_BPRC     0x04078  /* Broadcast Packets RX Count - R/clr */
 967 #define E1000_MPRC     0x0407C  /* Multicast Packets RX Count - R/clr */
 968 #define E1000_GPTC     0x04080  /* Good Packets TX Count - R/clr */
 969 #define E1000_GORCL    0x04088  /* Good Octets RX Count Low - R/clr */
 970 #define E1000_GORCH    0x0408C  /* Good Octets RX Count High - R/clr */
 971 #define E1000_GOTCL    0x04090  /* Good Octets TX Count Low - R/clr */
 972 #define E1000_GOTCH    0x04094  /* Good Octets TX Count High - R/clr */
 973 #define E1000_RNBC     0x040A0  /* RX No Buffers Count - R/clr */
 974 #define E1000_RUC      0x040A4  /* RX Undersize Count - R/clr */
 975 #define E1000_RFC      0x040A8  /* RX Fragment Count - R/clr */
 976 #define E1000_ROC      0x040AC  /* RX Oversize Count - R/clr */
 977 #define E1000_RJC      0x040B0  /* RX Jabber Count - R/clr */
 978 #define E1000_MGTPRC   0x040B4  /* Management Packets RX Count - R/clr */
 979 #define E1000_MGTPDC   0x040B8  /* Management Packets Dropped Count - R/clr */
 980 #define E1000_MGTPTC   0x040BC  /* Management Packets TX Count - R/clr */
 981 #define E1000_TORL     0x040C0  /* Total Octets RX Low - R/clr */
 982 #define E1000_TORH     0x040C4  /* Total Octets RX High - R/clr */
 983 #define E1000_TOTL     0x040C8  /* Total Octets TX Low - R/clr */
 984 #define E1000_TOTH     0x040CC  /* Total Octets TX High - R/clr */
 985 #define E1000_TPR      0x040D0  /* Total Packets RX - R/clr */
 986 #define E1000_TPT      0x040D4  /* Total Packets TX - R/clr */
 987 #define E1000_PTC64    0x040D8  /* Packets TX (64 bytes) - R/clr */
 988 #define E1000_PTC127   0x040DC  /* Packets TX (65-127 bytes) - R/clr */
 989 #define E1000_PTC255   0x040E0  /* Packets TX (128-255 bytes) - R/clr */
 990 #define E1000_PTC511   0x040E4  /* Packets TX (256-511 bytes) - R/clr */
 991 #define E1000_PTC1023  0x040E8  /* Packets TX (512-1023 bytes) - R/clr */
 992 #define E1000_PTC1522  0x040EC  /* Packets TX (1024-1522 Bytes) - R/clr */
 993 #define E1000_MPTC     0x040F0  /* Multicast Packets TX Count - R/clr */
 994 #define E1000_BPTC     0x040F4  /* Broadcast Packets TX Count - R/clr */
 995 #define E1000_TSCTC    0x040F8  /* TCP Segmentation Context TX - R/clr */
 996 #define E1000_TSCTFC   0x040FC  /* TCP Segmentation Context TX Fail - R/clr */
 997 #define E1000_IAC      0x04100  /* Interrupt Assertion Count */
 998 #define E1000_ICRXPTC  0x04104  /* Interrupt Cause Rx Packet Timer Expire Count */
 999 #define E1000_ICRXATC  0x04108  /* Interrupt Cause Rx Absolute Timer Expire Count */
1000 #define E1000_ICTXPTC  0x0410C  /* Interrupt Cause Tx Packet Timer Expire Count */
1001 #define E1000_ICTXATC  0x04110  /* Interrupt Cause Tx Absolute Timer Expire Count */
1002 #define E1000_ICTXQEC  0x04118  /* Interrupt Cause Tx Queue Empty Count */
1003 #define E1000_ICTXQMTC 0x0411C  /* Interrupt Cause Tx Queue Minimum Threshold Count */
1004 #define E1000_ICRXDMTC 0x04120  /* Interrupt Cause Rx Descriptor Minimum Threshold Count */
1005 #define E1000_ICRXOC   0x04124  /* Interrupt Cause Receiver Overrun Count */
1006 #define E1000_RXCSUM   0x05000  /* RX Checksum Control - RW */
1007 #define E1000_RFCTL    0x05008  /* Receive Filter Control */
1008 #define E1000_MTA      0x05200  /* Multicast Table Array - RW Array */
1009 #define E1000_RA       0x05400  /* Receive Address - RW Array */
1010 #define E1000_VFTA     0x05600  /* VLAN Filter Table Array - RW Array */
1011 #define E1000_WUC      0x05800  /* Wakeup Control - RW */
1012 #define E1000_WUFC     0x05808  /* Wakeup Filter Control - RW */
1013 #define E1000_WUS      0x05810  /* Wakeup Status - RO */
1014 #define E1000_MANC     0x05820  /* Management Control - RW */
1015 #define E1000_IPAV     0x05838  /* IP Address Valid - RW */
1016 #define E1000_IP4AT    0x05840  /* IPv4 Address Table - RW Array */
1017 #define E1000_IP6AT    0x05880  /* IPv6 Address Table - RW Array */
1018 #define E1000_WUPL     0x05900  /* Wakeup Packet Length - RW */
1019 #define E1000_WUPM     0x05A00  /* Wakeup Packet Memory - RO A */
1020 #define E1000_FFLT     0x05F00  /* Flexible Filter Length Table - RW Array */
1021 #define E1000_HOST_IF  0x08800  /* Host Interface */
1022 #define E1000_FFMT     0x09000  /* Flexible Filter Mask Table - RW Array */
1023 #define E1000_FFVT     0x09800  /* Flexible Filter Value Table - RW Array */
1024
1025 #define E1000_KUMCTRLSTA 0x00034        /* MAC-PHY interface - RW */
1026 #define E1000_MDPHYA     0x0003C        /* PHY address - RW */
1027 #define E1000_MANC2H     0x05860        /* Management Control To Host - RW */
1028 #define E1000_SW_FW_SYNC 0x05B5C        /* Software-Firmware Synchronization - RW */
1029
1030 #define E1000_GCR       0x05B00 /* PCI-Ex Control */
1031 #define E1000_GSCL_1    0x05B10 /* PCI-Ex Statistic Control #1 */
1032 #define E1000_GSCL_2    0x05B14 /* PCI-Ex Statistic Control #2 */
1033 #define E1000_GSCL_3    0x05B18 /* PCI-Ex Statistic Control #3 */
1034 #define E1000_GSCL_4    0x05B1C /* PCI-Ex Statistic Control #4 */
1035 #define E1000_FACTPS    0x05B30 /* Function Active and Power State to MNG */
1036 #define E1000_SWSM      0x05B50 /* SW Semaphore */
1037 #define E1000_FWSM      0x05B54 /* FW Semaphore */
1038 #define E1000_FFLT_DBG  0x05F04 /* Debug Register */
1039 #define E1000_HICR      0x08F00 /* Host Interface Control */
1040
1041 /* RSS registers */
1042 #define E1000_CPUVEC    0x02C10 /* CPU Vector Register - RW */
1043 #define E1000_MRQC      0x05818 /* Multiple Receive Control - RW */
1044 #define E1000_RETA      0x05C00 /* Redirection Table - RW Array */
1045 #define E1000_RSSRK     0x05C80 /* RSS Random Key - RW Array */
1046 #define E1000_RSSIM     0x05864 /* RSS Interrupt Mask */
1047 #define E1000_RSSIR     0x05868 /* RSS Interrupt Request */
1048 /* Register Set (82542)
1049  *
1050  * Some of the 82542 registers are located at different offsets than they are
1051  * in more current versions of the 8254x. Despite the difference in location,
1052  * the registers function in the same manner.
1053  */
1054 #define E1000_82542_CTL_AUX  E1000_CTL_AUX
1055 #define E1000_82542_CTRL     E1000_CTRL
1056 #define E1000_82542_CTRL_DUP E1000_CTRL_DUP
1057 #define E1000_82542_STATUS   E1000_STATUS
1058 #define E1000_82542_EECD     E1000_EECD
1059 #define E1000_82542_EERD     E1000_EERD
1060 #define E1000_82542_CTRL_EXT E1000_CTRL_EXT
1061 #define E1000_82542_FLA      E1000_FLA
1062 #define E1000_82542_MDIC     E1000_MDIC
1063 #define E1000_82542_SCTL     E1000_SCTL
1064 #define E1000_82542_FEXTNVM  E1000_FEXTNVM
1065 #define E1000_82542_FCAL     E1000_FCAL
1066 #define E1000_82542_FCAH     E1000_FCAH
1067 #define E1000_82542_FCT      E1000_FCT
1068 #define E1000_82542_VET      E1000_VET
1069 #define E1000_82542_RA       0x00040
1070 #define E1000_82542_ICR      E1000_ICR
1071 #define E1000_82542_ITR      E1000_ITR
1072 #define E1000_82542_ICS      E1000_ICS
1073 #define E1000_82542_IMS      E1000_IMS
1074 #define E1000_82542_IMC      E1000_IMC
1075 #define E1000_82542_RCTL     E1000_RCTL
1076 #define E1000_82542_RDTR     0x00108
1077 #define E1000_82542_RDBAL    0x00110
1078 #define E1000_82542_RDBAH    0x00114
1079 #define E1000_82542_RDLEN    0x00118
1080 #define E1000_82542_RDH      0x00120
1081 #define E1000_82542_RDT      0x00128
1082 #define E1000_82542_RDTR0    E1000_82542_RDTR
1083 #define E1000_82542_RDBAL0   E1000_82542_RDBAL
1084 #define E1000_82542_RDBAH0   E1000_82542_RDBAH
1085 #define E1000_82542_RDLEN0   E1000_82542_RDLEN
1086 #define E1000_82542_RDH0     E1000_82542_RDH
1087 #define E1000_82542_RDT0     E1000_82542_RDT
1088 #define E1000_82542_SRRCTL(_n) (0x280C + ((_n) << 8))   /* Split and Replication
1089                                                          * RX Control - RW */
1090 #define E1000_82542_DCA_RXCTRL(_n) (0x02814 + ((_n) << 8))
1091 #define E1000_82542_RDBAH3   0x02B04    /* RX Desc Base High Queue 3 - RW */
1092 #define E1000_82542_RDBAL3   0x02B00    /* RX Desc Low Queue 3 - RW */
1093 #define E1000_82542_RDLEN3   0x02B08    /* RX Desc Length Queue 3 - RW */
1094 #define E1000_82542_RDH3     0x02B10    /* RX Desc Head Queue 3 - RW */
1095 #define E1000_82542_RDT3     0x02B18    /* RX Desc Tail Queue 3 - RW */
1096 #define E1000_82542_RDBAL2   0x02A00    /* RX Desc Base Low Queue 2 - RW */
1097 #define E1000_82542_RDBAH2   0x02A04    /* RX Desc Base High Queue 2 - RW */
1098 #define E1000_82542_RDLEN2   0x02A08    /* RX Desc Length Queue 2 - RW */
1099 #define E1000_82542_RDH2     0x02A10    /* RX Desc Head Queue 2 - RW */
1100 #define E1000_82542_RDT2     0x02A18    /* RX Desc Tail Queue 2 - RW */
1101 #define E1000_82542_RDTR1    0x00130
1102 #define E1000_82542_RDBAL1   0x00138
1103 #define E1000_82542_RDBAH1   0x0013C
1104 #define E1000_82542_RDLEN1   0x00140
1105 #define E1000_82542_RDH1     0x00148
1106 #define E1000_82542_RDT1     0x00150
1107 #define E1000_82542_FCRTH    0x00160
1108 #define E1000_82542_FCRTL    0x00168
1109 #define E1000_82542_FCTTV    E1000_FCTTV
1110 #define E1000_82542_TXCW     E1000_TXCW
1111 #define E1000_82542_RXCW     E1000_RXCW
1112 #define E1000_82542_MTA      0x00200
1113 #define E1000_82542_TCTL     E1000_TCTL
1114 #define E1000_82542_TCTL_EXT E1000_TCTL_EXT
1115 #define E1000_82542_TIPG     E1000_TIPG
1116 #define E1000_82542_TDBAL    0x00420
1117 #define E1000_82542_TDBAH    0x00424
1118 #define E1000_82542_TDLEN    0x00428
1119 #define E1000_82542_TDH      0x00430
1120 #define E1000_82542_TDT      0x00438
1121 #define E1000_82542_TIDV     0x00440
1122 #define E1000_82542_TBT      E1000_TBT
1123 #define E1000_82542_AIT      E1000_AIT
1124 #define E1000_82542_VFTA     0x00600
1125 #define E1000_82542_LEDCTL   E1000_LEDCTL
1126 #define E1000_82542_PBA      E1000_PBA
1127 #define E1000_82542_PBS      E1000_PBS
1128 #define E1000_82542_EEMNGCTL E1000_EEMNGCTL
1129 #define E1000_82542_EEARBC   E1000_EEARBC
1130 #define E1000_82542_FLASHT   E1000_FLASHT
1131 #define E1000_82542_EEWR     E1000_EEWR
1132 #define E1000_82542_FLSWCTL  E1000_FLSWCTL
1133 #define E1000_82542_FLSWDATA E1000_FLSWDATA
1134 #define E1000_82542_FLSWCNT  E1000_FLSWCNT
1135 #define E1000_82542_FLOP     E1000_FLOP
1136 #define E1000_82542_EXTCNF_CTRL  E1000_EXTCNF_CTRL
1137 #define E1000_82542_EXTCNF_SIZE  E1000_EXTCNF_SIZE
1138 #define E1000_82542_PHY_CTRL E1000_PHY_CTRL
1139 #define E1000_82542_ERT      E1000_ERT
1140 #define E1000_82542_RXDCTL   E1000_RXDCTL
1141 #define E1000_82542_RXDCTL1  E1000_RXDCTL1
1142 #define E1000_82542_RADV     E1000_RADV
1143 #define E1000_82542_RSRPD    E1000_RSRPD
1144 #define E1000_82542_TXDMAC   E1000_TXDMAC
1145 #define E1000_82542_KABGTXD  E1000_KABGTXD
1146 #define E1000_82542_TDFHS    E1000_TDFHS
1147 #define E1000_82542_TDFTS    E1000_TDFTS
1148 #define E1000_82542_TDFPC    E1000_TDFPC
1149 #define E1000_82542_TXDCTL   E1000_TXDCTL
1150 #define E1000_82542_TADV     E1000_TADV
1151 #define E1000_82542_TSPMT    E1000_TSPMT
1152 #define E1000_82542_CRCERRS  E1000_CRCERRS
1153 #define E1000_82542_ALGNERRC E1000_ALGNERRC
1154 #define E1000_82542_SYMERRS  E1000_SYMERRS
1155 #define E1000_82542_RXERRC   E1000_RXERRC
1156 #define E1000_82542_MPC      E1000_MPC
1157 #define E1000_82542_SCC      E1000_SCC
1158 #define E1000_82542_ECOL     E1000_ECOL
1159 #define E1000_82542_MCC      E1000_MCC
1160 #define E1000_82542_LATECOL  E1000_LATECOL
1161 #define E1000_82542_COLC     E1000_COLC
1162 #define E1000_82542_DC       E1000_DC
1163 #define E1000_82542_TNCRS    E1000_TNCRS
1164 #define E1000_82542_SEC      E1000_SEC
1165 #define E1000_82542_CEXTERR  E1000_CEXTERR
1166 #define E1000_82542_RLEC     E1000_RLEC
1167 #define E1000_82542_XONRXC   E1000_XONRXC
1168 #define E1000_82542_XONTXC   E1000_XONTXC
1169 #define E1000_82542_XOFFRXC  E1000_XOFFRXC
1170 #define E1000_82542_XOFFTXC  E1000_XOFFTXC
1171 #define E1000_82542_FCRUC    E1000_FCRUC
1172 #define E1000_82542_PRC64    E1000_PRC64
1173 #define E1000_82542_PRC127   E1000_PRC127
1174 #define E1000_82542_PRC255   E1000_PRC255
1175 #define E1000_82542_PRC511   E1000_PRC511
1176 #define E1000_82542_PRC1023  E1000_PRC1023
1177 #define E1000_82542_PRC1522  E1000_PRC1522
1178 #define E1000_82542_GPRC     E1000_GPRC
1179 #define E1000_82542_BPRC     E1000_BPRC
1180 #define E1000_82542_MPRC     E1000_MPRC
1181 #define E1000_82542_GPTC     E1000_GPTC
1182 #define E1000_82542_GORCL    E1000_GORCL
1183 #define E1000_82542_GORCH    E1000_GORCH
1184 #define E1000_82542_GOTCL    E1000_GOTCL
1185 #define E1000_82542_GOTCH    E1000_GOTCH
1186 #define E1000_82542_RNBC     E1000_RNBC
1187 #define E1000_82542_RUC      E1000_RUC
1188 #define E1000_82542_RFC      E1000_RFC
1189 #define E1000_82542_ROC      E1000_ROC
1190 #define E1000_82542_RJC      E1000_RJC
1191 #define E1000_82542_MGTPRC   E1000_MGTPRC
1192 #define E1000_82542_MGTPDC   E1000_MGTPDC
1193 #define E1000_82542_MGTPTC   E1000_MGTPTC
1194 #define E1000_82542_TORL     E1000_TORL
1195 #define E1000_82542_TORH     E1000_TORH
1196 #define E1000_82542_TOTL     E1000_TOTL
1197 #define E1000_82542_TOTH     E1000_TOTH
1198 #define E1000_82542_TPR      E1000_TPR
1199 #define E1000_82542_TPT      E1000_TPT
1200 #define E1000_82542_PTC64    E1000_PTC64
1201 #define E1000_82542_PTC127   E1000_PTC127
1202 #define E1000_82542_PTC255   E1000_PTC255
1203 #define E1000_82542_PTC511   E1000_PTC511
1204 #define E1000_82542_PTC1023  E1000_PTC1023
1205 #define E1000_82542_PTC1522  E1000_PTC1522
1206 #define E1000_82542_MPTC     E1000_MPTC
1207 #define E1000_82542_BPTC     E1000_BPTC
1208 #define E1000_82542_TSCTC    E1000_TSCTC
1209 #define E1000_82542_TSCTFC   E1000_TSCTFC
1210 #define E1000_82542_RXCSUM   E1000_RXCSUM
1211 #define E1000_82542_WUC      E1000_WUC
1212 #define E1000_82542_WUFC     E1000_WUFC
1213 #define E1000_82542_WUS      E1000_WUS
1214 #define E1000_82542_MANC     E1000_MANC
1215 #define E1000_82542_IPAV     E1000_IPAV
1216 #define E1000_82542_IP4AT    E1000_IP4AT
1217 #define E1000_82542_IP6AT    E1000_IP6AT
1218 #define E1000_82542_WUPL     E1000_WUPL
1219 #define E1000_82542_WUPM     E1000_WUPM
1220 #define E1000_82542_FFLT     E1000_FFLT
1221 #define E1000_82542_TDFH     0x08010
1222 #define E1000_82542_TDFT     0x08018
1223 #define E1000_82542_FFMT     E1000_FFMT
1224 #define E1000_82542_FFVT     E1000_FFVT
1225 #define E1000_82542_HOST_IF  E1000_HOST_IF
1226 #define E1000_82542_IAM         E1000_IAM
1227 #define E1000_82542_EEMNGCTL    E1000_EEMNGCTL
1228 #define E1000_82542_PSRCTL      E1000_PSRCTL
1229 #define E1000_82542_RAID        E1000_RAID
1230 #define E1000_82542_TARC0       E1000_TARC0
1231 #define E1000_82542_TDBAL1      E1000_TDBAL1
1232 #define E1000_82542_TDBAH1      E1000_TDBAH1
1233 #define E1000_82542_TDLEN1      E1000_TDLEN1
1234 #define E1000_82542_TDH1        E1000_TDH1
1235 #define E1000_82542_TDT1        E1000_TDT1
1236 #define E1000_82542_TXDCTL1     E1000_TXDCTL1
1237 #define E1000_82542_TARC1       E1000_TARC1
1238 #define E1000_82542_RFCTL       E1000_RFCTL
1239 #define E1000_82542_GCR         E1000_GCR
1240 #define E1000_82542_GSCL_1      E1000_GSCL_1
1241 #define E1000_82542_GSCL_2      E1000_GSCL_2
1242 #define E1000_82542_GSCL_3      E1000_GSCL_3
1243 #define E1000_82542_GSCL_4      E1000_GSCL_4
1244 #define E1000_82542_FACTPS      E1000_FACTPS
1245 #define E1000_82542_SWSM        E1000_SWSM
1246 #define E1000_82542_FWSM        E1000_FWSM
1247 #define E1000_82542_FFLT_DBG    E1000_FFLT_DBG
1248 #define E1000_82542_IAC         E1000_IAC
1249 #define E1000_82542_ICRXPTC     E1000_ICRXPTC
1250 #define E1000_82542_ICRXATC     E1000_ICRXATC
1251 #define E1000_82542_ICTXPTC     E1000_ICTXPTC
1252 #define E1000_82542_ICTXATC     E1000_ICTXATC
1253 #define E1000_82542_ICTXQEC     E1000_ICTXQEC
1254 #define E1000_82542_ICTXQMTC    E1000_ICTXQMTC
1255 #define E1000_82542_ICRXDMTC    E1000_ICRXDMTC
1256 #define E1000_82542_ICRXOC      E1000_ICRXOC
1257 #define E1000_82542_HICR        E1000_HICR
1258
1259 #define E1000_82542_CPUVEC      E1000_CPUVEC
1260 #define E1000_82542_MRQC        E1000_MRQC
1261 #define E1000_82542_RETA        E1000_RETA
1262 #define E1000_82542_RSSRK       E1000_RSSRK
1263 #define E1000_82542_RSSIM       E1000_RSSIM
1264 #define E1000_82542_RSSIR       E1000_RSSIR
1265 #define E1000_82542_KUMCTRLSTA E1000_KUMCTRLSTA
1266 #define E1000_82542_SW_FW_SYNC E1000_SW_FW_SYNC
1267
1268 /* Statistics counters collected by the MAC */
1269 struct e1000_hw_stats {
1270         u64 crcerrs;
1271         u64 algnerrc;
1272         u64 symerrs;
1273         u64 rxerrc;
1274         u64 txerrc;
1275         u64 mpc;
1276         u64 scc;
1277         u64 ecol;
1278         u64 mcc;
1279         u64 latecol;
1280         u64 colc;
1281         u64 dc;
1282         u64 tncrs;
1283         u64 sec;
1284         u64 cexterr;
1285         u64 rlec;
1286         u64 xonrxc;
1287         u64 xontxc;
1288         u64 xoffrxc;
1289         u64 xofftxc;
1290         u64 fcruc;
1291         u64 prc64;
1292         u64 prc127;
1293         u64 prc255;
1294         u64 prc511;
1295         u64 prc1023;
1296         u64 prc1522;
1297         u64 gprc;
1298         u64 bprc;
1299         u64 mprc;
1300         u64 gptc;
1301         u64 gorcl;
1302         u64 gorch;
1303         u64 gotcl;
1304         u64 gotch;
1305         u64 rnbc;
1306         u64 ruc;
1307         u64 rfc;
1308         u64 roc;
1309         u64 rlerrc;
1310         u64 rjc;
1311         u64 mgprc;
1312         u64 mgpdc;
1313         u64 mgptc;
1314         u64 torl;
1315         u64 torh;
1316         u64 totl;
1317         u64 toth;
1318         u64 tpr;
1319         u64 tpt;
1320         u64 ptc64;
1321         u64 ptc127;
1322         u64 ptc255;
1323         u64 ptc511;
1324         u64 ptc1023;
1325         u64 ptc1522;
1326         u64 mptc;
1327         u64 bptc;
1328         u64 tsctc;
1329         u64 tsctfc;
1330         u64 iac;
1331         u64 icrxptc;
1332         u64 icrxatc;
1333         u64 ictxptc;
1334         u64 ictxatc;
1335         u64 ictxqec;
1336         u64 ictxqmtc;
1337         u64 icrxdmtc;
1338         u64 icrxoc;
1339 };
1340
1341 /* Structure containing variables used by the shared code (e1000_hw.c) */
1342 struct e1000_hw {
1343         u8 __iomem *hw_addr;
1344         u8 __iomem *flash_address;
1345         void __iomem *ce4100_gbe_mdio_base_virt;
1346         e1000_mac_type mac_type;
1347         e1000_phy_type phy_type;
1348         u32 phy_init_script;
1349         e1000_media_type media_type;
1350         void *back;
1351         struct e1000_shadow_ram *eeprom_shadow_ram;
1352         u32 flash_bank_size;
1353         u32 flash_base_addr;
1354         e1000_fc_type fc;
1355         e1000_bus_speed bus_speed;
1356         e1000_bus_width bus_width;
1357         e1000_bus_type bus_type;
1358         struct e1000_eeprom_info eeprom;
1359         e1000_ms_type master_slave;
1360         e1000_ms_type original_master_slave;
1361         e1000_ffe_config ffe_config_state;
1362         u32 asf_firmware_present;
1363         u32 eeprom_semaphore_present;
1364         unsigned long io_base;
1365         u32 phy_id;
1366         u32 phy_revision;
1367         u32 phy_addr;
1368         u32 original_fc;
1369         u32 txcw;
1370         u32 autoneg_failed;
1371         u32 max_frame_size;
1372         u32 min_frame_size;
1373         u32 mc_filter_type;
1374         u32 num_mc_addrs;
1375         u32 collision_delta;
1376         u32 tx_packet_delta;
1377         u32 ledctl_default;
1378         u32 ledctl_mode1;
1379         u32 ledctl_mode2;
1380         bool tx_pkt_filtering;
1381         struct e1000_host_mng_dhcp_cookie mng_cookie;
1382         u16 phy_spd_default;
1383         u16 autoneg_advertised;
1384         u16 pci_cmd_word;
1385         u16 fc_high_water;
1386         u16 fc_low_water;
1387         u16 fc_pause_time;
1388         u16 current_ifs_val;
1389         u16 ifs_min_val;
1390         u16 ifs_max_val;
1391         u16 ifs_step_size;
1392         u16 ifs_ratio;
1393         u16 device_id;
1394         u16 vendor_id;
1395         u16 subsystem_id;
1396         u16 subsystem_vendor_id;
1397         u8 revision_id;
1398         u8 autoneg;
1399         u8 mdix;
1400         u8 forced_speed_duplex;
1401         u8 wait_autoneg_complete;
1402         u8 dma_fairness;
1403         u8 mac_addr[NODE_ADDRESS_SIZE];
1404         u8 perm_mac_addr[NODE_ADDRESS_SIZE];
1405         bool disable_polarity_correction;
1406         bool speed_downgraded;
1407         e1000_smart_speed smart_speed;
1408         e1000_dsp_config dsp_config_state;
1409         bool get_link_status;
1410         bool serdes_has_link;
1411         bool tbi_compatibility_en;
1412         bool tbi_compatibility_on;
1413         bool laa_is_present;
1414         bool phy_reset_disable;
1415         bool initialize_hw_bits_disable;
1416         bool fc_send_xon;
1417         bool fc_strict_ieee;
1418         bool report_tx_early;
1419         bool adaptive_ifs;
1420         bool ifs_params_forced;
1421         bool in_ifs_mode;
1422         bool mng_reg_access_disabled;
1423         bool leave_av_bit_off;
1424         bool bad_tx_carr_stats_fd;
1425         bool has_smbus;
1426 };
1427
1428 #define E1000_EEPROM_SWDPIN0   0x0001   /* SWDPIN 0 EEPROM Value */
1429 #define E1000_EEPROM_LED_LOGIC 0x0020   /* Led Logic Word */
1430 #define E1000_EEPROM_RW_REG_DATA   16   /* Offset to data in EEPROM read/write registers */
1431 #define E1000_EEPROM_RW_REG_DONE   2    /* Offset to READ/WRITE done bit */
1432 #define E1000_EEPROM_RW_REG_START  1    /* First bit for telling part to start operation */
1433 #define E1000_EEPROM_RW_ADDR_SHIFT 2    /* Shift to the address bits */
1434 #define E1000_EEPROM_POLL_WRITE    1    /* Flag for polling for write complete */
1435 #define E1000_EEPROM_POLL_READ     0    /* Flag for polling for read complete */
1436 /* Register Bit Masks */
1437 /* Device Control */
1438 #define E1000_CTRL_FD       0x00000001  /* Full duplex.0=half; 1=full */
1439 #define E1000_CTRL_BEM      0x00000002  /* Endian Mode.0=little,1=big */
1440 #define E1000_CTRL_PRIOR    0x00000004  /* Priority on PCI. 0=rx,1=fair */
1441 #define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004        /*Blocks new Master requests */
1442 #define E1000_CTRL_LRST     0x00000008  /* Link reset. 0=normal,1=reset */
1443 #define E1000_CTRL_TME      0x00000010  /* Test mode. 0=normal,1=test */
1444 #define E1000_CTRL_SLE      0x00000020  /* Serial Link on 0=dis,1=en */
1445 #define E1000_CTRL_ASDE     0x00000020  /* Auto-speed detect enable */
1446 #define E1000_CTRL_SLU      0x00000040  /* Set link up (Force Link) */
1447 #define E1000_CTRL_ILOS     0x00000080  /* Invert Loss-Of Signal */
1448 #define E1000_CTRL_SPD_SEL  0x00000300  /* Speed Select Mask */
1449 #define E1000_CTRL_SPD_10   0x00000000  /* Force 10Mb */
1450 #define E1000_CTRL_SPD_100  0x00000100  /* Force 100Mb */
1451 #define E1000_CTRL_SPD_1000 0x00000200  /* Force 1Gb */
1452 #define E1000_CTRL_BEM32    0x00000400  /* Big Endian 32 mode */
1453 #define E1000_CTRL_FRCSPD   0x00000800  /* Force Speed */
1454 #define E1000_CTRL_FRCDPX   0x00001000  /* Force Duplex */
1455 #define E1000_CTRL_D_UD_EN  0x00002000  /* Dock/Undock enable */
1456 #define E1000_CTRL_D_UD_POLARITY 0x00004000     /* Defined polarity of Dock/Undock indication in SDP[0] */
1457 #define E1000_CTRL_FORCE_PHY_RESET 0x00008000   /* Reset both PHY ports, through PHYRST_N pin */
1458 #define E1000_CTRL_EXT_LINK_EN 0x00010000       /* enable link status from external LINK_0 and LINK_1 pins */
1459 #define E1000_CTRL_SWDPIN0  0x00040000  /* SWDPIN 0 value */
1460 #define E1000_CTRL_SWDPIN1  0x00080000  /* SWDPIN 1 value */
1461 #define E1000_CTRL_SWDPIN2  0x00100000  /* SWDPIN 2 value */
1462 #define E1000_CTRL_SWDPIN3  0x00200000  /* SWDPIN 3 value */
1463 #define E1000_CTRL_SWDPIO0  0x00400000  /* SWDPIN 0 Input or output */
1464 #define E1000_CTRL_SWDPIO1  0x00800000  /* SWDPIN 1 input or output */
1465 #define E1000_CTRL_SWDPIO2  0x01000000  /* SWDPIN 2 input or output */
1466 #define E1000_CTRL_SWDPIO3  0x02000000  /* SWDPIN 3 input or output */
1467 #define E1000_CTRL_RST      0x04000000  /* Global reset */
1468 #define E1000_CTRL_RFCE     0x08000000  /* Receive Flow Control enable */
1469 #define E1000_CTRL_TFCE     0x10000000  /* Transmit flow control enable */
1470 #define E1000_CTRL_RTE      0x20000000  /* Routing tag enable */
1471 #define E1000_CTRL_VME      0x40000000  /* IEEE VLAN mode enable */
1472 #define E1000_CTRL_PHY_RST  0x80000000  /* PHY Reset */
1473 #define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to manageability engine */
1474
1475 /* Device Status */
1476 #define E1000_STATUS_FD         0x00000001      /* Full duplex.0=half,1=full */
1477 #define E1000_STATUS_LU         0x00000002      /* Link up.0=no,1=link */
1478 #define E1000_STATUS_FUNC_MASK  0x0000000C      /* PCI Function Mask */
1479 #define E1000_STATUS_FUNC_SHIFT 2
1480 #define E1000_STATUS_FUNC_0     0x00000000      /* Function 0 */
1481 #define E1000_STATUS_FUNC_1     0x00000004      /* Function 1 */
1482 #define E1000_STATUS_TXOFF      0x00000010      /* transmission paused */
1483 #define E1000_STATUS_TBIMODE    0x00000020      /* TBI mode */
1484 #define E1000_STATUS_SPEED_MASK 0x000000C0
1485 #define E1000_STATUS_SPEED_10   0x00000000      /* Speed 10Mb/s */
1486 #define E1000_STATUS_SPEED_100  0x00000040      /* Speed 100Mb/s */
1487 #define E1000_STATUS_SPEED_1000 0x00000080      /* Speed 1000Mb/s */
1488 #define E1000_STATUS_LAN_INIT_DONE 0x00000200   /* Lan Init Completion
1489                                                    by EEPROM/Flash */
1490 #define E1000_STATUS_ASDV       0x00000300      /* Auto speed detect value */
1491 #define E1000_STATUS_DOCK_CI    0x00000800      /* Change in Dock/Undock state. Clear on write '0'. */
1492 #define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000       /* Status of Master requests. */
1493 #define E1000_STATUS_MTXCKOK    0x00000400      /* MTX clock running OK */
1494 #define E1000_STATUS_PCI66      0x00000800      /* In 66Mhz slot */
1495 #define E1000_STATUS_BUS64      0x00001000      /* In 64 bit slot */
1496 #define E1000_STATUS_PCIX_MODE  0x00002000      /* PCI-X mode */
1497 #define E1000_STATUS_PCIX_SPEED 0x0000C000      /* PCI-X bus speed */
1498 #define E1000_STATUS_BMC_SKU_0  0x00100000      /* BMC USB redirect disabled */
1499 #define E1000_STATUS_BMC_SKU_1  0x00200000      /* BMC SRAM disabled */
1500 #define E1000_STATUS_BMC_SKU_2  0x00400000      /* BMC SDRAM disabled */
1501 #define E1000_STATUS_BMC_CRYPTO 0x00800000      /* BMC crypto disabled */
1502 #define E1000_STATUS_BMC_LITE   0x01000000      /* BMC external code execution disabled */
1503 #define E1000_STATUS_RGMII_ENABLE 0x02000000    /* RGMII disabled */
1504 #define E1000_STATUS_FUSE_8       0x04000000
1505 #define E1000_STATUS_FUSE_9       0x08000000
1506 #define E1000_STATUS_SERDES0_DIS  0x10000000    /* SERDES disabled on port 0 */
1507 #define E1000_STATUS_SERDES1_DIS  0x20000000    /* SERDES disabled on port 1 */
1508
1509 /* Constants used to interpret the masked PCI-X bus speed. */
1510 #define E1000_STATUS_PCIX_SPEED_66  0x00000000  /* PCI-X bus speed  50-66 MHz */
1511 #define E1000_STATUS_PCIX_SPEED_100 0x00004000  /* PCI-X bus speed  66-100 MHz */
1512 #define E1000_STATUS_PCIX_SPEED_133 0x00008000  /* PCI-X bus speed 100-133 MHz */
1513
1514 /* EEPROM/Flash Control */
1515 #define E1000_EECD_SK        0x00000001 /* EEPROM Clock */
1516 #define E1000_EECD_CS        0x00000002 /* EEPROM Chip Select */
1517 #define E1000_EECD_DI        0x00000004 /* EEPROM Data In */
1518 #define E1000_EECD_DO        0x00000008 /* EEPROM Data Out */
1519 #define E1000_EECD_FWE_MASK  0x00000030
1520 #define E1000_EECD_FWE_DIS   0x00000010 /* Disable FLASH writes */
1521 #define E1000_EECD_FWE_EN    0x00000020 /* Enable FLASH writes */
1522 #define E1000_EECD_FWE_SHIFT 4
1523 #define E1000_EECD_REQ       0x00000040 /* EEPROM Access Request */
1524 #define E1000_EECD_GNT       0x00000080 /* EEPROM Access Grant */
1525 #define E1000_EECD_PRES      0x00000100 /* EEPROM Present */
1526 #define E1000_EECD_SIZE      0x00000200 /* EEPROM Size (0=64 word 1=256 word) */
1527 #define E1000_EECD_ADDR_BITS 0x00000400 /* EEPROM Addressing bits based on type
1528                                          * (0-small, 1-large) */
1529 #define E1000_EECD_TYPE      0x00002000 /* EEPROM Type (1-SPI, 0-Microwire) */
1530 #ifndef E1000_EEPROM_GRANT_ATTEMPTS
1531 #define E1000_EEPROM_GRANT_ATTEMPTS 1000        /* EEPROM # attempts to gain grant */
1532 #endif
1533 #define E1000_EECD_AUTO_RD          0x00000200  /* EEPROM Auto Read done */
1534 #define E1000_EECD_SIZE_EX_MASK     0x00007800  /* EEprom Size */
1535 #define E1000_EECD_SIZE_EX_SHIFT    11
1536 #define E1000_EECD_NVADDS    0x00018000 /* NVM Address Size */
1537 #define E1000_EECD_SELSHAD   0x00020000 /* Select Shadow RAM */
1538 #define E1000_EECD_INITSRAM  0x00040000 /* Initialize Shadow RAM */
1539 #define E1000_EECD_FLUPD     0x00080000 /* Update FLASH */
1540 #define E1000_EECD_AUPDEN    0x00100000 /* Enable Autonomous FLASH update */
1541 #define E1000_EECD_SHADV     0x00200000 /* Shadow RAM Data Valid */
1542 #define E1000_EECD_SEC1VAL   0x00400000 /* Sector One Valid */
1543 #define E1000_EECD_SECVAL_SHIFT      22
1544 #define E1000_STM_OPCODE     0xDB00
1545 #define E1000_HICR_FW_RESET  0xC0
1546
1547 #define E1000_SHADOW_RAM_WORDS     2048
1548 #define E1000_ICH_NVM_SIG_WORD     0x13
1549 #define E1000_ICH_NVM_SIG_MASK     0xC0
1550
1551 /* EEPROM Read */
1552 #define E1000_EERD_START      0x00000001        /* Start Read */
1553 #define E1000_EERD_DONE       0x00000010        /* Read Done */
1554 #define E1000_EERD_ADDR_SHIFT 8
1555 #define E1000_EERD_ADDR_MASK  0x0000FF00        /* Read Address */
1556 #define E1000_EERD_DATA_SHIFT 16
1557 #define E1000_EERD_DATA_MASK  0xFFFF0000        /* Read Data */
1558
1559 /* SPI EEPROM Status Register */
1560 #define EEPROM_STATUS_RDY_SPI  0x01
1561 #define EEPROM_STATUS_WEN_SPI  0x02
1562 #define EEPROM_STATUS_BP0_SPI  0x04
1563 #define EEPROM_STATUS_BP1_SPI  0x08
1564 #define EEPROM_STATUS_WPEN_SPI 0x80
1565
1566 /* Extended Device Control */
1567 #define E1000_CTRL_EXT_GPI0_EN   0x00000001     /* Maps SDP4 to GPI0 */
1568 #define E1000_CTRL_EXT_GPI1_EN   0x00000002     /* Maps SDP5 to GPI1 */
1569 #define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN
1570 #define E1000_CTRL_EXT_GPI2_EN   0x00000004     /* Maps SDP6 to GPI2 */
1571 #define E1000_CTRL_EXT_GPI3_EN   0x00000008     /* Maps SDP7 to GPI3 */
1572 #define E1000_CTRL_EXT_SDP4_DATA 0x00000010     /* Value of SW Defineable Pin 4 */
1573 #define E1000_CTRL_EXT_SDP5_DATA 0x00000020     /* Value of SW Defineable Pin 5 */
1574 #define E1000_CTRL_EXT_PHY_INT   E1000_CTRL_EXT_SDP5_DATA
1575 #define E1000_CTRL_EXT_SDP6_DATA 0x00000040     /* Value of SW Defineable Pin 6 */
1576 #define E1000_CTRL_EXT_SDP7_DATA 0x00000080     /* Value of SW Defineable Pin 7 */
1577 #define E1000_CTRL_EXT_SDP4_DIR  0x00000100     /* Direction of SDP4 0=in 1=out */
1578 #define E1000_CTRL_EXT_SDP5_DIR  0x00000200     /* Direction of SDP5 0=in 1=out */
1579 #define E1000_CTRL_EXT_SDP6_DIR  0x00000400     /* Direction of SDP6 0=in 1=out */
1580 #define E1000_CTRL_EXT_SDP7_DIR  0x00000800     /* Direction of SDP7 0=in 1=out */
1581 #define E1000_CTRL_EXT_ASDCHK    0x00001000     /* Initiate an ASD sequence */
1582 #define E1000_CTRL_EXT_EE_RST    0x00002000     /* Reinitialize from EEPROM */
1583 #define E1000_CTRL_EXT_IPS       0x00004000     /* Invert Power State */
1584 #define E1000_CTRL_EXT_SPD_BYPS  0x00008000     /* Speed Select Bypass */
1585 #define E1000_CTRL_EXT_RO_DIS    0x00020000     /* Relaxed Ordering disable */
1586 #define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
1587 #define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
1588 #define E1000_CTRL_EXT_LINK_MODE_TBI  0x00C00000
1589 #define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000
1590 #define E1000_CTRL_EXT_LINK_MODE_SERDES  0x00C00000
1591 #define E1000_CTRL_EXT_LINK_MODE_SGMII   0x00800000
1592 #define E1000_CTRL_EXT_WR_WMARK_MASK  0x03000000
1593 #define E1000_CTRL_EXT_WR_WMARK_256   0x00000000
1594 #define E1000_CTRL_EXT_WR_WMARK_320   0x01000000
1595 #define E1000_CTRL_EXT_WR_WMARK_384   0x02000000
1596 #define E1000_CTRL_EXT_WR_WMARK_448   0x03000000
1597 #define E1000_CTRL_EXT_DRV_LOAD       0x10000000        /* Driver loaded bit for FW */
1598 #define E1000_CTRL_EXT_IAME           0x08000000        /* Interrupt acknowledge Auto-mask */
1599 #define E1000_CTRL_EXT_INT_TIMER_CLR  0x20000000        /* Clear Interrupt timers after IMS clear */
1600 #define E1000_CRTL_EXT_PB_PAREN       0x01000000        /* packet buffer parity error detection enabled */
1601 #define E1000_CTRL_EXT_DF_PAREN       0x02000000        /* descriptor FIFO parity error detection enable */
1602 #define E1000_CTRL_EXT_GHOST_PAREN    0x40000000
1603
1604 /* MDI Control */
1605 #define E1000_MDIC_DATA_MASK 0x0000FFFF
1606 #define E1000_MDIC_REG_MASK  0x001F0000
1607 #define E1000_MDIC_REG_SHIFT 16
1608 #define E1000_MDIC_PHY_MASK  0x03E00000
1609 #define E1000_MDIC_PHY_SHIFT 21
1610 #define E1000_MDIC_OP_WRITE  0x04000000
1611 #define E1000_MDIC_OP_READ   0x08000000
1612 #define E1000_MDIC_READY     0x10000000
1613 #define E1000_MDIC_INT_EN    0x20000000
1614 #define E1000_MDIC_ERROR     0x40000000
1615
1616 #define INTEL_CE_GBE_MDIC_OP_WRITE      0x04000000
1617 #define INTEL_CE_GBE_MDIC_OP_READ       0x00000000
1618 #define INTEL_CE_GBE_MDIC_GO            0x80000000
1619 #define INTEL_CE_GBE_MDIC_READ_ERROR    0x80000000
1620
1621 #define E1000_KUMCTRLSTA_MASK           0x0000FFFF
1622 #define E1000_KUMCTRLSTA_OFFSET         0x001F0000
1623 #define E1000_KUMCTRLSTA_OFFSET_SHIFT   16
1624 #define E1000_KUMCTRLSTA_REN            0x00200000
1625
1626 #define E1000_KUMCTRLSTA_OFFSET_FIFO_CTRL      0x00000000
1627 #define E1000_KUMCTRLSTA_OFFSET_CTRL           0x00000001
1628 #define E1000_KUMCTRLSTA_OFFSET_INB_CTRL       0x00000002
1629 #define E1000_KUMCTRLSTA_OFFSET_DIAG           0x00000003
1630 #define E1000_KUMCTRLSTA_OFFSET_TIMEOUTS       0x00000004
1631 #define E1000_KUMCTRLSTA_OFFSET_INB_PARAM      0x00000009
1632 #define E1000_KUMCTRLSTA_OFFSET_HD_CTRL        0x00000010
1633 #define E1000_KUMCTRLSTA_OFFSET_M2P_SERDES     0x0000001E
1634 #define E1000_KUMCTRLSTA_OFFSET_M2P_MODES      0x0000001F
1635
1636 /* FIFO Control */
1637 #define E1000_KUMCTRLSTA_FIFO_CTRL_RX_BYPASS   0x00000008
1638 #define E1000_KUMCTRLSTA_FIFO_CTRL_TX_BYPASS   0x00000800
1639
1640 /* In-Band Control */
1641 #define E1000_KUMCTRLSTA_INB_CTRL_LINK_STATUS_TX_TIMEOUT_DEFAULT    0x00000500
1642 #define E1000_KUMCTRLSTA_INB_CTRL_DIS_PADDING  0x00000010
1643
1644 /* Half-Duplex Control */
1645 #define E1000_KUMCTRLSTA_HD_CTRL_10_100_DEFAULT 0x00000004
1646 #define E1000_KUMCTRLSTA_HD_CTRL_1000_DEFAULT  0x00000000
1647
1648 #define E1000_KUMCTRLSTA_OFFSET_K0S_CTRL       0x0000001E
1649
1650 #define E1000_KUMCTRLSTA_DIAG_FELPBK           0x2000
1651 #define E1000_KUMCTRLSTA_DIAG_NELPBK           0x1000
1652
1653 #define E1000_KUMCTRLSTA_K0S_100_EN            0x2000
1654 #define E1000_KUMCTRLSTA_K0S_GBE_EN            0x1000
1655 #define E1000_KUMCTRLSTA_K0S_ENTRY_LATENCY_MASK   0x0003
1656
1657 #define E1000_KABGTXD_BGSQLBIAS                0x00050000
1658
1659 #define E1000_PHY_CTRL_SPD_EN                  0x00000001
1660 #define E1000_PHY_CTRL_D0A_LPLU                0x00000002
1661 #define E1000_PHY_CTRL_NOND0A_LPLU             0x00000004
1662 #define E1000_PHY_CTRL_NOND0A_GBE_DISABLE      0x00000008
1663 #define E1000_PHY_CTRL_GBE_DISABLE             0x00000040
1664 #define E1000_PHY_CTRL_B2B_EN                  0x00000080
1665
1666 /* LED Control */
1667 #define E1000_LEDCTL_LED0_MODE_MASK       0x0000000F
1668 #define E1000_LEDCTL_LED0_MODE_SHIFT      0
1669 #define E1000_LEDCTL_LED0_BLINK_RATE      0x0000020
1670 #define E1000_LEDCTL_LED0_IVRT            0x00000040
1671 #define E1000_LEDCTL_LED0_BLINK           0x00000080
1672 #define E1000_LEDCTL_LED1_MODE_MASK       0x00000F00
1673 #define E1000_LEDCTL_LED1_MODE_SHIFT      8
1674 #define E1000_LEDCTL_LED1_BLINK_RATE      0x0002000
1675 #define E1000_LEDCTL_LED1_IVRT            0x00004000
1676 #define E1000_LEDCTL_LED1_BLINK           0x00008000
1677 #define E1000_LEDCTL_LED2_MODE_MASK       0x000F0000
1678 #define E1000_LEDCTL_LED2_MODE_SHIFT      16
1679 #define E1000_LEDCTL_LED2_BLINK_RATE      0x00200000
1680 #define E1000_LEDCTL_LED2_IVRT            0x00400000
1681 #define E1000_LEDCTL_LED2_BLINK           0x00800000
1682 #define E1000_LEDCTL_LED3_MODE_MASK       0x0F000000
1683 #define E1000_LEDCTL_LED3_MODE_SHIFT      24
1684 #define E1000_LEDCTL_LED3_BLINK_RATE      0x20000000
1685 #define E1000_LEDCTL_LED3_IVRT            0x40000000
1686 #define E1000_LEDCTL_LED3_BLINK           0x80000000
1687
1688 #define E1000_LEDCTL_MODE_LINK_10_1000  0x0
1689 #define E1000_LEDCTL_MODE_LINK_100_1000 0x1
1690 #define E1000_LEDCTL_MODE_LINK_UP       0x2
1691 #define E1000_LEDCTL_MODE_ACTIVITY      0x3
1692 #define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4
1693 #define E1000_LEDCTL_MODE_LINK_10       0x5
1694 #define E1000_LEDCTL_MODE_LINK_100      0x6
1695 #define E1000_LEDCTL_MODE_LINK_1000     0x7
1696 #define E1000_LEDCTL_MODE_PCIX_MODE     0x8
1697 #define E1000_LEDCTL_MODE_FULL_DUPLEX   0x9
1698 #define E1000_LEDCTL_MODE_COLLISION     0xA
1699 #define E1000_LEDCTL_MODE_BUS_SPEED     0xB
1700 #define E1000_LEDCTL_MODE_BUS_SIZE      0xC
1701 #define E1000_LEDCTL_MODE_PAUSED        0xD
1702 #define E1000_LEDCTL_MODE_LED_ON        0xE
1703 #define E1000_LEDCTL_MODE_LED_OFF       0xF
1704
1705 /* Receive Address */
1706 #define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
1707
1708 /* Interrupt Cause Read */
1709 #define E1000_ICR_TXDW          0x00000001      /* Transmit desc written back */
1710 #define E1000_ICR_TXQE          0x00000002      /* Transmit Queue empty */
1711 #define E1000_ICR_LSC           0x00000004      /* Link Status Change */
1712 #define E1000_ICR_RXSEQ         0x00000008      /* rx sequence error */
1713 #define E1000_ICR_RXDMT0        0x00000010      /* rx desc min. threshold (0) */
1714 #define E1000_ICR_RXO           0x00000040      /* rx overrun */
1715 #define E1000_ICR_RXT0          0x00000080      /* rx timer intr (ring 0) */
1716 #define E1000_ICR_MDAC          0x00000200      /* MDIO access complete */
1717 #define E1000_ICR_RXCFG         0x00000400      /* RX /c/ ordered set */
1718 #define E1000_ICR_GPI_EN0       0x00000800      /* GP Int 0 */
1719 #define E1000_ICR_GPI_EN1       0x00001000      /* GP Int 1 */
1720 #define E1000_ICR_GPI_EN2       0x00002000      /* GP Int 2 */
1721 #define E1000_ICR_GPI_EN3       0x00004000      /* GP Int 3 */
1722 #define E1000_ICR_TXD_LOW       0x00008000
1723 #define E1000_ICR_SRPD          0x00010000
1724 #define E1000_ICR_ACK           0x00020000      /* Receive Ack frame */
1725 #define E1000_ICR_MNG           0x00040000      /* Manageability event */
1726 #define E1000_ICR_DOCK          0x00080000      /* Dock/Undock */
1727 #define E1000_ICR_INT_ASSERTED  0x80000000      /* If this bit asserted, the driver should claim the interrupt */
1728 #define E1000_ICR_RXD_FIFO_PAR0 0x00100000      /* queue 0 Rx descriptor FIFO parity error */
1729 #define E1000_ICR_TXD_FIFO_PAR0 0x00200000      /* queue 0 Tx descriptor FIFO parity error */
1730 #define E1000_ICR_HOST_ARB_PAR  0x00400000      /* host arb read buffer parity error */
1731 #define E1000_ICR_PB_PAR        0x00800000      /* packet buffer parity error */
1732 #define E1000_ICR_RXD_FIFO_PAR1 0x01000000      /* queue 1 Rx descriptor FIFO parity error */
1733 #define E1000_ICR_TXD_FIFO_PAR1 0x02000000      /* queue 1 Tx descriptor FIFO parity error */
1734 #define E1000_ICR_ALL_PARITY    0x03F00000      /* all parity error bits */
1735 #define E1000_ICR_DSW           0x00000020      /* FW changed the status of DISSW bit in the FWSM */
1736 #define E1000_ICR_PHYINT        0x00001000      /* LAN connected device generates an interrupt */
1737 #define E1000_ICR_EPRST         0x00100000      /* ME hardware reset occurs */
1738
1739 /* Interrupt Cause Set */
1740 #define E1000_ICS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
1741 #define E1000_ICS_TXQE      E1000_ICR_TXQE      /* Transmit Queue empty */
1742 #define E1000_ICS_LSC       E1000_ICR_LSC       /* Link Status Change */
1743 #define E1000_ICS_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
1744 #define E1000_ICS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
1745 #define E1000_ICS_RXO       E1000_ICR_RXO       /* rx overrun */
1746 #define E1000_ICS_RXT0      E1000_ICR_RXT0      /* rx timer intr */
1747 #define E1000_ICS_MDAC      E1000_ICR_MDAC      /* MDIO access complete */
1748 #define E1000_ICS_RXCFG     E1000_ICR_RXCFG     /* RX /c/ ordered set */
1749 #define E1000_ICS_GPI_EN0   E1000_ICR_GPI_EN0   /* GP Int 0 */
1750 #define E1000_ICS_GPI_EN1   E1000_ICR_GPI_EN1   /* GP Int 1 */
1751 #define E1000_ICS_GPI_EN2   E1000_ICR_GPI_EN2   /* GP Int 2 */
1752 #define E1000_ICS_GPI_EN3   E1000_ICR_GPI_EN3   /* GP Int 3 */
1753 #define E1000_ICS_TXD_LOW   E1000_ICR_TXD_LOW
1754 #define E1000_ICS_SRPD      E1000_ICR_SRPD
1755 #define E1000_ICS_ACK       E1000_ICR_ACK       /* Receive Ack frame */
1756 #define E1000_ICS_MNG       E1000_ICR_MNG       /* Manageability event */
1757 #define E1000_ICS_DOCK      E1000_ICR_DOCK      /* Dock/Undock */
1758 #define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
1759 #define E1000_ICS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
1760 #define E1000_ICS_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR  /* host arb read buffer parity error */
1761 #define E1000_ICS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
1762 #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
1763 #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
1764 #define E1000_ICS_DSW       E1000_ICR_DSW
1765 #define E1000_ICS_PHYINT    E1000_ICR_PHYINT
1766 #define E1000_ICS_EPRST     E1000_ICR_EPRST
1767
1768 /* Interrupt Mask Set */
1769 #define E1000_IMS_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
1770 #define E1000_IMS_TXQE      E1000_ICR_TXQE      /* Transmit Queue empty */
1771 #define E1000_IMS_LSC       E1000_ICR_LSC       /* Link Status Change */
1772 #define E1000_IMS_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
1773 #define E1000_IMS_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
1774 #define E1000_IMS_RXO       E1000_ICR_RXO       /* rx overrun */
1775 #define E1000_IMS_RXT0      E1000_ICR_RXT0      /* rx timer intr */
1776 #define E1000_IMS_MDAC      E1000_ICR_MDAC      /* MDIO access complete */
1777 #define E1000_IMS_RXCFG     E1000_ICR_RXCFG     /* RX /c/ ordered set */
1778 #define E1000_IMS_GPI_EN0   E1000_ICR_GPI_EN0   /* GP Int 0 */
1779 #define E1000_IMS_GPI_EN1   E1000_ICR_GPI_EN1   /* GP Int 1 */
1780 #define E1000_IMS_GPI_EN2   E1000_ICR_GPI_EN2   /* GP Int 2 */
1781 #define E1000_IMS_GPI_EN3   E1000_ICR_GPI_EN3   /* GP Int 3 */
1782 #define E1000_IMS_TXD_LOW   E1000_ICR_TXD_LOW
1783 #define E1000_IMS_SRPD      E1000_ICR_SRPD
1784 #define E1000_IMS_ACK       E1000_ICR_ACK       /* Receive Ack frame */
1785 #define E1000_IMS_MNG       E1000_ICR_MNG       /* Manageability event */
1786 #define E1000_IMS_DOCK      E1000_ICR_DOCK      /* Dock/Undock */
1787 #define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
1788 #define E1000_IMS_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
1789 #define E1000_IMS_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR  /* host arb read buffer parity error */
1790 #define E1000_IMS_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
1791 #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
1792 #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
1793 #define E1000_IMS_DSW       E1000_ICR_DSW
1794 #define E1000_IMS_PHYINT    E1000_ICR_PHYINT
1795 #define E1000_IMS_EPRST     E1000_ICR_EPRST
1796
1797 /* Interrupt Mask Clear */
1798 #define E1000_IMC_TXDW      E1000_ICR_TXDW      /* Transmit desc written back */
1799 #define E1000_IMC_TXQE      E1000_ICR_TXQE      /* Transmit Queue empty */
1800 #define E1000_IMC_LSC       E1000_ICR_LSC       /* Link Status Change */
1801 #define E1000_IMC_RXSEQ     E1000_ICR_RXSEQ     /* rx sequence error */
1802 #define E1000_IMC_RXDMT0    E1000_ICR_RXDMT0    /* rx desc min. threshold */
1803 #define E1000_IMC_RXO       E1000_ICR_RXO       /* rx overrun */
1804 #define E1000_IMC_RXT0      E1000_ICR_RXT0      /* rx timer intr */
1805 #define E1000_IMC_MDAC      E1000_ICR_MDAC      /* MDIO access complete */
1806 #define E1000_IMC_RXCFG     E1000_ICR_RXCFG     /* RX /c/ ordered set */
1807 #define E1000_IMC_GPI_EN0   E1000_ICR_GPI_EN0   /* GP Int 0 */
1808 #define E1000_IMC_GPI_EN1   E1000_ICR_GPI_EN1   /* GP Int 1 */
1809 #define E1000_IMC_GPI_EN2   E1000_ICR_GPI_EN2   /* GP Int 2 */
1810 #define E1000_IMC_GPI_EN3   E1000_ICR_GPI_EN3   /* GP Int 3 */
1811 #define E1000_IMC_TXD_LOW   E1000_ICR_TXD_LOW
1812 #define E1000_IMC_SRPD      E1000_ICR_SRPD
1813 #define E1000_IMC_ACK       E1000_ICR_ACK       /* Receive Ack frame */
1814 #define E1000_IMC_MNG       E1000_ICR_MNG       /* Manageability event */
1815 #define E1000_IMC_DOCK      E1000_ICR_DOCK      /* Dock/Undock */
1816 #define E1000_IMC_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* queue 0 Rx descriptor FIFO parity error */
1817 #define E1000_IMC_TXD_FIFO_PAR0 E1000_ICR_TXD_FIFO_PAR0 /* queue 0 Tx descriptor FIFO parity error */
1818 #define E1000_IMC_HOST_ARB_PAR  E1000_ICR_HOST_ARB_PAR  /* host arb read buffer parity error */
1819 #define E1000_IMC_PB_PAR        E1000_ICR_PB_PAR        /* packet buffer parity error */
1820 #define E1000_IMC_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* queue 1 Rx descriptor FIFO parity error */
1821 #define E1000_IMC_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 /* queue 1 Tx descriptor FIFO parity error */
1822 #define E1000_IMC_DSW       E1000_ICR_DSW
1823 #define E1000_IMC_PHYINT    E1000_ICR_PHYINT
1824 #define E1000_IMC_EPRST     E1000_ICR_EPRST
1825
1826 /* Receive Control */
1827 #define E1000_RCTL_RST            0x00000001    /* Software reset */
1828 #define E1000_RCTL_EN             0x00000002    /* enable */
1829 #define E1000_RCTL_SBP            0x00000004    /* store bad packet */
1830 #define E1000_RCTL_UPE            0x00000008    /* unicast promiscuous enable */
1831 #define E1000_RCTL_MPE            0x00000010    /* multicast promiscuous enab */
1832 #define E1000_RCTL_LPE            0x00000020    /* long packet enable */
1833 #define E1000_RCTL_LBM_NO         0x00000000    /* no loopback mode */
1834 #define E1000_RCTL_LBM_MAC        0x00000040    /* MAC loopback mode */
1835 #define E1000_RCTL_LBM_SLP        0x00000080    /* serial link loopback mode */
1836 #define E1000_RCTL_LBM_TCVR       0x000000C0    /* tcvr loopback mode */
1837 #define E1000_RCTL_DTYP_MASK      0x00000C00    /* Descriptor type mask */
1838 #define E1000_RCTL_DTYP_PS        0x00000400    /* Packet Split descriptor */
1839 #define E1000_RCTL_RDMTS_HALF     0x00000000    /* rx desc min threshold size */
1840 #define E1000_RCTL_RDMTS_QUAT     0x00000100    /* rx desc min threshold size */
1841 #define E1000_RCTL_RDMTS_EIGTH    0x00000200    /* rx desc min threshold size */
1842 #define E1000_RCTL_MO_SHIFT       12    /* multicast offset shift */
1843 #define E1000_RCTL_MO_0           0x00000000    /* multicast offset 11:0 */
1844 #define E1000_RCTL_MO_1           0x00001000    /* multicast offset 12:1 */
1845 #define E1000_RCTL_MO_2           0x00002000    /* multicast offset 13:2 */
1846 #define E1000_RCTL_MO_3           0x00003000    /* multicast offset 15:4 */
1847 #define E1000_RCTL_MDR            0x00004000    /* multicast desc ring 0 */
1848 #define E1000_RCTL_BAM            0x00008000    /* broadcast enable */
1849 /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */
1850 #define E1000_RCTL_SZ_2048        0x00000000    /* rx buffer size 2048 */
1851 #define E1000_RCTL_SZ_1024        0x00010000    /* rx buffer size 1024 */
1852 #define E1000_RCTL_SZ_512         0x00020000    /* rx buffer size 512 */
1853 #define E1000_RCTL_SZ_256         0x00030000    /* rx buffer size 256 */
1854 /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */
1855 #define E1000_RCTL_SZ_16384       0x00010000    /* rx buffer size 16384 */
1856 #define E1000_RCTL_SZ_8192        0x00020000    /* rx buffer size 8192 */
1857 #define E1000_RCTL_SZ_4096        0x00030000    /* rx buffer size 4096 */
1858 #define E1000_RCTL_VFE            0x00040000    /* vlan filter enable */
1859 #define E1000_RCTL_CFIEN          0x00080000    /* canonical form enable */
1860 #define E1000_RCTL_CFI            0x00100000    /* canonical form indicator */
1861 #define E1000_RCTL_DPF            0x00400000    /* discard pause frames */
1862 #define E1000_RCTL_PMCF           0x00800000    /* pass MAC control frames */
1863 #define E1000_RCTL_BSEX           0x02000000    /* Buffer size extension */
1864 #define E1000_RCTL_SECRC          0x04000000    /* Strip Ethernet CRC */
1865 #define E1000_RCTL_FLXBUF_MASK    0x78000000    /* Flexible buffer size */
1866 #define E1000_RCTL_FLXBUF_SHIFT   27    /* Flexible buffer shift */
1867
1868 /* Use byte values for the following shift parameters
1869  * Usage:
1870  *     psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) &
1871  *                  E1000_PSRCTL_BSIZE0_MASK) |
1872  *                ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) &
1873  *                  E1000_PSRCTL_BSIZE1_MASK) |
1874  *                ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) &
1875  *                  E1000_PSRCTL_BSIZE2_MASK) |
1876  *                ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |;
1877  *                  E1000_PSRCTL_BSIZE3_MASK))
1878  * where value0 = [128..16256],  default=256
1879  *       value1 = [1024..64512], default=4096
1880  *       value2 = [0..64512],    default=4096
1881  *       value3 = [0..64512],    default=0
1882  */
1883
1884 #define E1000_PSRCTL_BSIZE0_MASK   0x0000007F
1885 #define E1000_PSRCTL_BSIZE1_MASK   0x00003F00
1886 #define E1000_PSRCTL_BSIZE2_MASK   0x003F0000
1887 #define E1000_PSRCTL_BSIZE3_MASK   0x3F000000
1888
1889 #define E1000_PSRCTL_BSIZE0_SHIFT  7    /* Shift _right_ 7 */
1890 #define E1000_PSRCTL_BSIZE1_SHIFT  2    /* Shift _right_ 2 */
1891 #define E1000_PSRCTL_BSIZE2_SHIFT  6    /* Shift _left_ 6 */
1892 #define E1000_PSRCTL_BSIZE3_SHIFT 14    /* Shift _left_ 14 */
1893
1894 /* SW_W_SYNC definitions */
1895 #define E1000_SWFW_EEP_SM     0x0001
1896 #define E1000_SWFW_PHY0_SM    0x0002
1897 #define E1000_SWFW_PHY1_SM    0x0004
1898 #define E1000_SWFW_MAC_CSR_SM 0x0008
1899
1900 /* Receive Descriptor */
1901 #define E1000_RDT_DELAY 0x0000ffff      /* Delay timer (1=1024us) */
1902 #define E1000_RDT_FPDB  0x80000000      /* Flush descriptor block */
1903 #define E1000_RDLEN_LEN 0x0007ff80      /* descriptor length */
1904 #define E1000_RDH_RDH   0x0000ffff      /* receive descriptor head */
1905 #define E1000_RDT_RDT   0x0000ffff      /* receive descriptor tail */
1906
1907 /* Flow Control */
1908 #define E1000_FCRTH_RTH  0x0000FFF8     /* Mask Bits[15:3] for RTH */
1909 #define E1000_FCRTH_XFCE 0x80000000     /* External Flow Control Enable */
1910 #define E1000_FCRTL_RTL  0x0000FFF8     /* Mask Bits[15:3] for RTL */
1911 #define E1000_FCRTL_XONE 0x80000000     /* Enable XON frame transmission */
1912
1913 /* Header split receive */
1914 #define E1000_RFCTL_ISCSI_DIS           0x00000001
1915 #define E1000_RFCTL_ISCSI_DWC_MASK      0x0000003E
1916 #define E1000_RFCTL_ISCSI_DWC_SHIFT     1
1917 #define E1000_RFCTL_NFSW_DIS            0x00000040
1918 #define E1000_RFCTL_NFSR_DIS            0x00000080
1919 #define E1000_RFCTL_NFS_VER_MASK        0x00000300
1920 #define E1000_RFCTL_NFS_VER_SHIFT       8
1921 #define E1000_RFCTL_IPV6_DIS            0x00000400
1922 #define E1000_RFCTL_IPV6_XSUM_DIS       0x00000800
1923 #define E1000_RFCTL_ACK_DIS             0x00001000
1924 #define E1000_RFCTL_ACKD_DIS            0x00002000
1925 #define E1000_RFCTL_IPFRSP_DIS          0x00004000
1926 #define E1000_RFCTL_EXTEN               0x00008000
1927 #define E1000_RFCTL_IPV6_EX_DIS         0x00010000
1928 #define E1000_RFCTL_NEW_IPV6_EXT_DIS    0x00020000
1929
1930 /* Receive Descriptor Control */
1931 #define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */
1932 #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */
1933 #define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */
1934 #define E1000_RXDCTL_GRAN    0x01000000 /* RXDCTL Granularity */
1935
1936 /* Transmit Descriptor Control */
1937 #define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */
1938 #define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */
1939 #define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */
1940 #define E1000_TXDCTL_GRAN    0x01000000 /* TXDCTL Granularity */
1941 #define E1000_TXDCTL_LWTHRESH 0xFE000000        /* TXDCTL Low Threshold */
1942 #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */
1943 #define E1000_TXDCTL_COUNT_DESC 0x00400000      /* Enable the counting of desc.
1944                                                    still to be processed. */
1945 /* Transmit Configuration Word */
1946 #define E1000_TXCW_FD         0x00000020        /* TXCW full duplex */
1947 #define E1000_TXCW_HD         0x00000040        /* TXCW half duplex */
1948 #define E1000_TXCW_PAUSE      0x00000080        /* TXCW sym pause request */
1949 #define E1000_TXCW_ASM_DIR    0x00000100        /* TXCW astm pause direction */
1950 #define E1000_TXCW_PAUSE_MASK 0x00000180        /* TXCW pause request mask */
1951 #define E1000_TXCW_RF         0x00003000        /* TXCW remote fault */
1952 #define E1000_TXCW_NP         0x00008000        /* TXCW next page */
1953 #define E1000_TXCW_CW         0x0000ffff        /* TxConfigWord mask */
1954 #define E1000_TXCW_TXC        0x40000000        /* Transmit Config control */
1955 #define E1000_TXCW_ANE        0x80000000        /* Auto-neg enable */
1956
1957 /* Receive Configuration Word */
1958 #define E1000_RXCW_CW    0x0000ffff     /* RxConfigWord mask */
1959 #define E1000_RXCW_NC    0x04000000     /* Receive config no carrier */
1960 #define E1000_RXCW_IV    0x08000000     /* Receive config invalid */
1961 #define E1000_RXCW_CC    0x10000000     /* Receive config change */
1962 #define E1000_RXCW_C     0x20000000     /* Receive config */
1963 #define E1000_RXCW_SYNCH 0x40000000     /* Receive config synch */
1964 #define E1000_RXCW_ANC   0x80000000     /* Auto-neg complete */
1965
1966 /* Transmit Control */
1967 #define E1000_TCTL_RST    0x00000001    /* software reset */
1968 #define E1000_TCTL_EN     0x00000002    /* enable tx */
1969 #define E1000_TCTL_BCE    0x00000004    /* busy check enable */
1970 #define E1000_TCTL_PSP    0x00000008    /* pad short packets */
1971 #define E1000_TCTL_CT     0x00000ff0    /* collision threshold */
1972 #define E1000_TCTL_COLD   0x003ff000    /* collision distance */
1973 #define E1000_TCTL_SWXOFF 0x00400000    /* SW Xoff transmission */
1974 #define E1000_TCTL_PBE    0x00800000    /* Packet Burst Enable */
1975 #define E1000_TCTL_RTLC   0x01000000    /* Re-transmit on late collision */
1976 #define E1000_TCTL_NRTU   0x02000000    /* No Re-transmit on underrun */
1977 #define E1000_TCTL_MULR   0x10000000    /* Multiple request support */
1978 /* Extended Transmit Control */
1979 #define E1000_TCTL_EXT_BST_MASK  0x000003FF     /* Backoff Slot Time */
1980 #define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00     /* Gigabit Carry Extend Padding */
1981
1982 /* Receive Checksum Control */
1983 #define E1000_RXCSUM_PCSS_MASK 0x000000FF       /* Packet Checksum Start */
1984 #define E1000_RXCSUM_IPOFL     0x00000100       /* IPv4 checksum offload */
1985 #define E1000_RXCSUM_TUOFL     0x00000200       /* TCP / UDP checksum offload */
1986 #define E1000_RXCSUM_IPV6OFL   0x00000400       /* IPv6 checksum offload */
1987 #define E1000_RXCSUM_IPPCSE    0x00001000       /* IP payload checksum enable */
1988 #define E1000_RXCSUM_PCSD      0x00002000       /* packet checksum disabled */
1989
1990 /* Multiple Receive Queue Control */
1991 #define E1000_MRQC_ENABLE_MASK              0x00000003
1992 #define E1000_MRQC_ENABLE_RSS_2Q            0x00000001
1993 #define E1000_MRQC_ENABLE_RSS_INT           0x00000004
1994 #define E1000_MRQC_RSS_FIELD_MASK           0xFFFF0000
1995 #define E1000_MRQC_RSS_FIELD_IPV4_TCP       0x00010000
1996 #define E1000_MRQC_RSS_FIELD_IPV4           0x00020000
1997 #define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX    0x00040000
1998 #define E1000_MRQC_RSS_FIELD_IPV6_EX        0x00080000
1999 #define E1000_MRQC_RSS_FIELD_IPV6           0x00100000
2000 #define E1000_MRQC_RSS_FIELD_IPV6_TCP       0x00200000
2001
2002 /* Definitions for power management and wakeup registers */
2003 /* Wake Up Control */
2004 #define E1000_WUC_APME       0x00000001 /* APM Enable */
2005 #define E1000_WUC_PME_EN     0x00000002 /* PME Enable */
2006 #define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */
2007 #define E1000_WUC_APMPME     0x00000008 /* Assert PME on APM Wakeup */
2008 #define E1000_WUC_SPM        0x80000000 /* Enable SPM */
2009
2010 /* Wake Up Filter Control */
2011 #define E1000_WUFC_LNKC 0x00000001      /* Link Status Change Wakeup Enable */
2012 #define E1000_WUFC_MAG  0x00000002      /* Magic Packet Wakeup Enable */
2013 #define E1000_WUFC_EX   0x00000004      /* Directed Exact Wakeup Enable */
2014 #define E1000_WUFC_MC   0x00000008      /* Directed Multicast Wakeup Enable */
2015 #define E1000_WUFC_BC   0x00000010      /* Broadcast Wakeup Enable */
2016 #define E1000_WUFC_ARP  0x00000020      /* ARP Request Packet Wakeup Enable */
2017 #define E1000_WUFC_IPV4 0x00000040      /* Directed IPv4 Packet Wakeup Enable */
2018 #define E1000_WUFC_IPV6 0x00000080      /* Directed IPv6 Packet Wakeup Enable */
2019 #define E1000_WUFC_IGNORE_TCO      0x00008000   /* Ignore WakeOn TCO packets */
2020 #define E1000_WUFC_FLX0 0x00010000      /* Flexible Filter 0 Enable */
2021 #define E1000_WUFC_FLX1 0x00020000      /* Flexible Filter 1 Enable */
2022 #define E1000_WUFC_FLX2 0x00040000      /* Flexible Filter 2 Enable */
2023 #define E1000_WUFC_FLX3 0x00080000      /* Flexible Filter 3 Enable */
2024 #define E1000_WUFC_ALL_FILTERS 0x000F00FF       /* Mask for all wakeup filters */
2025 #define E1000_WUFC_FLX_OFFSET 16        /* Offset to the Flexible Filters bits */
2026 #define E1000_WUFC_FLX_FILTERS 0x000F0000       /* Mask for the 4 flexible filters */
2027
2028 /* Wake Up Status */
2029 #define E1000_WUS_LNKC 0x00000001       /* Link Status Changed */
2030 #define E1000_WUS_MAG  0x00000002       /* Magic Packet Received */
2031 #define E1000_WUS_EX   0x00000004       /* Directed Exact Received */
2032 #define E1000_WUS_MC   0x00000008       /* Directed Multicast Received */
2033 #define E1000_WUS_BC   0x00000010       /* Broadcast Received */
2034 #define E1000_WUS_ARP  0x00000020       /* ARP Request Packet Received */
2035 #define E1000_WUS_IPV4 0x00000040       /* Directed IPv4 Packet Wakeup Received */
2036 #define E1000_WUS_IPV6 0x00000080       /* Directed IPv6 Packet Wakeup Received */
2037 #define E1000_WUS_FLX0 0x00010000       /* Flexible Filter 0 Match */
2038 #define E1000_WUS_FLX1 0x00020000       /* Flexible Filter 1 Match */
2039 #define E1000_WUS_FLX2 0x00040000       /* Flexible Filter 2 Match */
2040 #define E1000_WUS_FLX3 0x00080000       /* Flexible Filter 3 Match */
2041 #define E1000_WUS_FLX_FILTERS 0x000F0000        /* Mask for the 4 flexible filters */
2042
2043 /* Management Control */
2044 #define E1000_MANC_SMBUS_EN      0x00000001     /* SMBus Enabled - RO */
2045 #define E1000_MANC_ASF_EN        0x00000002     /* ASF Enabled - RO */
2046 #define E1000_MANC_R_ON_FORCE    0x00000004     /* Reset on Force TCO - RO */
2047 #define E1000_MANC_RMCP_EN       0x00000100     /* Enable RCMP 026Fh Filtering */
2048 #define E1000_MANC_0298_EN       0x00000200     /* Enable RCMP 0298h Filtering */
2049 #define E1000_MANC_IPV4_EN       0x00000400     /* Enable IPv4 */
2050 #define E1000_MANC_IPV6_EN       0x00000800     /* Enable IPv6 */
2051 #define E1000_MANC_SNAP_EN       0x00001000     /* Accept LLC/SNAP */
2052 #define E1000_MANC_ARP_EN        0x00002000     /* Enable ARP Request Filtering */
2053 #define E1000_MANC_NEIGHBOR_EN   0x00004000     /* Enable Neighbor Discovery
2054                                                  * Filtering */
2055 #define E1000_MANC_ARP_RES_EN    0x00008000     /* Enable ARP response Filtering */
2056 #define E1000_MANC_TCO_RESET     0x00010000     /* TCO Reset Occurred */
2057 #define E1000_MANC_RCV_TCO_EN    0x00020000     /* Receive TCO Packets Enabled */
2058 #define E1000_MANC_REPORT_STATUS 0x00040000     /* Status Reporting Enabled */
2059 #define E1000_MANC_RCV_ALL       0x00080000     /* Receive All Enabled */
2060 #define E1000_MANC_BLK_PHY_RST_ON_IDE   0x00040000      /* Block phy resets */
2061 #define E1000_MANC_EN_MAC_ADDR_FILTER   0x00100000      /* Enable MAC address
2062                                                          * filtering */
2063 #define E1000_MANC_EN_MNG2HOST   0x00200000     /* Enable MNG packets to host
2064                                                  * memory */
2065 #define E1000_MANC_EN_IP_ADDR_FILTER    0x00400000      /* Enable IP address
2066                                                          * filtering */
2067 #define E1000_MANC_EN_XSUM_FILTER   0x00800000  /* Enable checksum filtering */
2068 #define E1000_MANC_BR_EN         0x01000000     /* Enable broadcast filtering */
2069 #define E1000_MANC_SMB_REQ       0x01000000     /* SMBus Request */
2070 #define E1000_MANC_SMB_GNT       0x02000000     /* SMBus Grant */
2071 #define E1000_MANC_SMB_CLK_IN    0x04000000     /* SMBus Clock In */
2072 #define E1000_MANC_SMB_DATA_IN   0x08000000     /* SMBus Data In */
2073 #define E1000_MANC_SMB_DATA_OUT  0x10000000     /* SMBus Data Out */
2074 #define E1000_MANC_SMB_CLK_OUT   0x20000000     /* SMBus Clock Out */
2075
2076 #define E1000_MANC_SMB_DATA_OUT_SHIFT  28       /* SMBus Data Out Shift */
2077 #define E1000_MANC_SMB_CLK_OUT_SHIFT   29       /* SMBus Clock Out Shift */
2078
2079 /* SW Semaphore Register */
2080 #define E1000_SWSM_SMBI         0x00000001      /* Driver Semaphore bit */
2081 #define E1000_SWSM_SWESMBI      0x00000002      /* FW Semaphore bit */
2082 #define E1000_SWSM_WMNG         0x00000004      /* Wake MNG Clock */
2083 #define E1000_SWSM_DRV_LOAD     0x00000008      /* Driver Loaded Bit */
2084
2085 /* FW Semaphore Register */
2086 #define E1000_FWSM_MODE_MASK    0x0000000E      /* FW mode */
2087 #define E1000_FWSM_MODE_SHIFT            1
2088 #define E1000_FWSM_FW_VALID     0x00008000      /* FW established a valid mode */
2089
2090 #define E1000_FWSM_RSPCIPHY        0x00000040   /* Reset PHY on PCI reset */
2091 #define E1000_FWSM_DISSW           0x10000000   /* FW disable SW Write Access */
2092 #define E1000_FWSM_SKUSEL_MASK     0x60000000   /* LAN SKU select */
2093 #define E1000_FWSM_SKUEL_SHIFT     29
2094 #define E1000_FWSM_SKUSEL_EMB      0x0  /* Embedded SKU */
2095 #define E1000_FWSM_SKUSEL_CONS     0x1  /* Consumer SKU */
2096 #define E1000_FWSM_SKUSEL_PERF_100 0x2  /* Perf & Corp 10/100 SKU */
2097 #define E1000_FWSM_SKUSEL_PERF_GBE 0x3  /* Perf & Copr GbE SKU */
2098
2099 /* FFLT Debug Register */
2100 #define E1000_FFLT_DBG_INVC     0x00100000      /* Invalid /C/ code handling */
2101
2102 typedef enum {
2103         e1000_mng_mode_none = 0,
2104         e1000_mng_mode_asf,
2105         e1000_mng_mode_pt,
2106         e1000_mng_mode_ipmi,
2107         e1000_mng_mode_host_interface_only
2108 } e1000_mng_mode;
2109
2110 /* Host Interface Control Register */
2111 #define E1000_HICR_EN           0x00000001      /* Enable Bit - RO */
2112 #define E1000_HICR_C            0x00000002      /* Driver sets this bit when done
2113                                                  * to put command in RAM */
2114 #define E1000_HICR_SV           0x00000004      /* Status Validity */
2115 #define E1000_HICR_FWR          0x00000080      /* FW reset. Set by the Host */
2116
2117 /* Host Interface Command Interface - Address range 0x8800-0x8EFF */
2118 #define E1000_HI_MAX_DATA_LENGTH         252    /* Host Interface data length */
2119 #define E1000_HI_MAX_BLOCK_BYTE_LENGTH  1792    /* Number of bytes in range */
2120 #define E1000_HI_MAX_BLOCK_DWORD_LENGTH  448    /* Number of dwords in range */
2121 #define E1000_HI_COMMAND_TIMEOUT         500    /* Time in ms to process HI command */
2122
2123 struct e1000_host_command_header {
2124         u8 command_id;
2125         u8 command_length;
2126         u8 command_options;     /* I/F bits for command, status for return */
2127         u8 checksum;
2128 };
2129 struct e1000_host_command_info {
2130         struct e1000_host_command_header command_header;        /* Command Head/Command Result Head has 4 bytes */
2131         u8 command_data[E1000_HI_MAX_DATA_LENGTH];      /* Command data can length 0..252 */
2132 };
2133
2134 /* Host SMB register #0 */
2135 #define E1000_HSMC0R_CLKIN      0x00000001      /* SMB Clock in */
2136 #define E1000_HSMC0R_DATAIN     0x00000002      /* SMB Data in */
2137 #define E1000_HSMC0R_DATAOUT    0x00000004      /* SMB Data out */
2138 #define E1000_HSMC0R_CLKOUT     0x00000008      /* SMB Clock out */
2139
2140 /* Host SMB register #1 */
2141 #define E1000_HSMC1R_CLKIN      E1000_HSMC0R_CLKIN
2142 #define E1000_HSMC1R_DATAIN     E1000_HSMC0R_DATAIN
2143 #define E1000_HSMC1R_DATAOUT    E1000_HSMC0R_DATAOUT
2144 #define E1000_HSMC1R_CLKOUT     E1000_HSMC0R_CLKOUT
2145
2146 /* FW Status Register */
2147 #define E1000_FWSTS_FWS_MASK    0x000000FF      /* FW Status */
2148
2149 /* Wake Up Packet Length */
2150 #define E1000_WUPL_LENGTH_MASK 0x0FFF   /* Only the lower 12 bits are valid */
2151
2152 #define E1000_MDALIGN          4096
2153
2154 /* PCI-Ex registers*/
2155
2156 /* PCI-Ex Control Register */
2157 #define E1000_GCR_RXD_NO_SNOOP          0x00000001
2158 #define E1000_GCR_RXDSCW_NO_SNOOP       0x00000002
2159 #define E1000_GCR_RXDSCR_NO_SNOOP       0x00000004
2160 #define E1000_GCR_TXD_NO_SNOOP          0x00000008
2161 #define E1000_GCR_TXDSCW_NO_SNOOP       0x00000010
2162 #define E1000_GCR_TXDSCR_NO_SNOOP       0x00000020
2163
2164 #define PCI_EX_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP         | \
2165                              E1000_GCR_RXDSCW_NO_SNOOP      | \
2166                              E1000_GCR_RXDSCR_NO_SNOOP      | \
2167                              E1000_GCR_TXD_NO_SNOOP         | \
2168                              E1000_GCR_TXDSCW_NO_SNOOP      | \
2169                              E1000_GCR_TXDSCR_NO_SNOOP)
2170
2171 #define PCI_EX_82566_SNOOP_ALL PCI_EX_NO_SNOOP_ALL
2172
2173 #define E1000_GCR_L1_ACT_WITHOUT_L0S_RX 0x08000000
2174 /* Function Active and Power State to MNG */
2175 #define E1000_FACTPS_FUNC0_POWER_STATE_MASK         0x00000003
2176 #define E1000_FACTPS_LAN0_VALID                     0x00000004
2177 #define E1000_FACTPS_FUNC0_AUX_EN                   0x00000008
2178 #define E1000_FACTPS_FUNC1_POWER_STATE_MASK         0x000000C0
2179 #define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT        6
2180 #define E1000_FACTPS_LAN1_VALID                     0x00000100
2181 #define E1000_FACTPS_FUNC1_AUX_EN                   0x00000200
2182 #define E1000_FACTPS_FUNC2_POWER_STATE_MASK         0x00003000
2183 #define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT        12
2184 #define E1000_FACTPS_IDE_ENABLE                     0x00004000
2185 #define E1000_FACTPS_FUNC2_AUX_EN                   0x00008000
2186 #define E1000_FACTPS_FUNC3_POWER_STATE_MASK         0x000C0000
2187 #define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT        18
2188 #define E1000_FACTPS_SP_ENABLE                      0x00100000
2189 #define E1000_FACTPS_FUNC3_AUX_EN                   0x00200000
2190 #define E1000_FACTPS_FUNC4_POWER_STATE_MASK         0x03000000
2191 #define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT        24
2192 #define E1000_FACTPS_IPMI_ENABLE                    0x04000000
2193 #define E1000_FACTPS_FUNC4_AUX_EN                   0x08000000
2194 #define E1000_FACTPS_MNGCG                          0x20000000
2195 #define E1000_FACTPS_LAN_FUNC_SEL                   0x40000000
2196 #define E1000_FACTPS_PM_STATE_CHANGED               0x80000000
2197
2198 /* PCI-Ex Config Space */
2199 #define PCI_EX_LINK_STATUS           0x12
2200 #define PCI_EX_LINK_WIDTH_MASK       0x3F0
2201 #define PCI_EX_LINK_WIDTH_SHIFT      4
2202
2203 /* EEPROM Commands - Microwire */
2204 #define EEPROM_READ_OPCODE_MICROWIRE  0x6       /* EEPROM read opcode */
2205 #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5       /* EEPROM write opcode */
2206 #define EEPROM_ERASE_OPCODE_MICROWIRE 0x7       /* EEPROM erase opcode */
2207 #define EEPROM_EWEN_OPCODE_MICROWIRE  0x13      /* EEPROM erase/write enable */
2208 #define EEPROM_EWDS_OPCODE_MICROWIRE  0x10      /* EEPROM erase/write disable */
2209
2210 /* EEPROM Commands - SPI */
2211 #define EEPROM_MAX_RETRY_SPI        5000        /* Max wait of 5ms, for RDY signal */
2212 #define EEPROM_READ_OPCODE_SPI      0x03        /* EEPROM read opcode */
2213 #define EEPROM_WRITE_OPCODE_SPI     0x02        /* EEPROM write opcode */
2214 #define EEPROM_A8_OPCODE_SPI        0x08        /* opcode bit-3 = address bit-8 */
2215 #define EEPROM_WREN_OPCODE_SPI      0x06        /* EEPROM set Write Enable latch */
2216 #define EEPROM_WRDI_OPCODE_SPI      0x04        /* EEPROM reset Write Enable latch */
2217 #define EEPROM_RDSR_OPCODE_SPI      0x05        /* EEPROM read Status register */
2218 #define EEPROM_WRSR_OPCODE_SPI      0x01        /* EEPROM write Status register */
2219 #define EEPROM_ERASE4K_OPCODE_SPI   0x20        /* EEPROM ERASE 4KB */
2220 #define EEPROM_ERASE64K_OPCODE_SPI  0xD8        /* EEPROM ERASE 64KB */
2221 #define EEPROM_ERASE256_OPCODE_SPI  0xDB        /* EEPROM ERASE 256B */
2222
2223 /* EEPROM Size definitions */
2224 #define EEPROM_WORD_SIZE_SHIFT  6
2225 #define EEPROM_SIZE_SHIFT       10
2226 #define EEPROM_SIZE_MASK        0x1C00
2227
2228 /* EEPROM Word Offsets */
2229 #define EEPROM_COMPAT                 0x0003
2230 #define EEPROM_ID_LED_SETTINGS        0x0004
2231 #define EEPROM_VERSION                0x0005
2232 #define EEPROM_SERDES_AMPLITUDE       0x0006    /* For SERDES output amplitude adjustment. */
2233 #define EEPROM_PHY_CLASS_WORD         0x0007
2234 #define EEPROM_INIT_CONTROL1_REG      0x000A
2235 #define EEPROM_INIT_CONTROL2_REG      0x000F
2236 #define EEPROM_SWDEF_PINS_CTRL_PORT_1 0x0010
2237 #define EEPROM_INIT_CONTROL3_PORT_B   0x0014
2238 #define EEPROM_INIT_3GIO_3            0x001A
2239 #define EEPROM_SWDEF_PINS_CTRL_PORT_0 0x0020
2240 #define EEPROM_INIT_CONTROL3_PORT_A   0x0024
2241 #define EEPROM_CFG                    0x0012
2242 #define EEPROM_FLASH_VERSION          0x0032
2243 #define EEPROM_CHECKSUM_REG           0x003F
2244
2245 #define E1000_EEPROM_CFG_DONE         0x00040000        /* MNG config cycle done */
2246 #define E1000_EEPROM_CFG_DONE_PORT_1  0x00080000        /* ...for second port */
2247
2248 /* Word definitions for ID LED Settings */
2249 #define ID_LED_RESERVED_0000 0x0000
2250 #define ID_LED_RESERVED_FFFF 0xFFFF
2251 #define ID_LED_DEFAULT       ((ID_LED_OFF1_ON2 << 12) | \
2252                               (ID_LED_OFF1_OFF2 << 8) | \
2253                               (ID_LED_DEF1_DEF2 << 4) | \
2254                               (ID_LED_DEF1_DEF2))
2255 #define ID_LED_DEF1_DEF2     0x1
2256 #define ID_LED_DEF1_ON2      0x2
2257 #define ID_LED_DEF1_OFF2     0x3
2258 #define ID_LED_ON1_DEF2      0x4
2259 #define ID_LED_ON1_ON2       0x5
2260 #define ID_LED_ON1_OFF2      0x6
2261 #define ID_LED_OFF1_DEF2     0x7
2262 #define ID_LED_OFF1_ON2      0x8
2263 #define ID_LED_OFF1_OFF2     0x9
2264
2265 #define IGP_ACTIVITY_LED_MASK   0xFFFFF0FF
2266 #define IGP_ACTIVITY_LED_ENABLE 0x0300
2267 #define IGP_LED3_MODE           0x07000000
2268
2269 /* Mask bits for SERDES amplitude adjustment in Word 6 of the EEPROM */
2270 #define EEPROM_SERDES_AMPLITUDE_MASK  0x000F
2271
2272 /* Mask bit for PHY class in Word 7 of the EEPROM */
2273 #define EEPROM_PHY_CLASS_A   0x8000
2274
2275 /* Mask bits for fields in Word 0x0a of the EEPROM */
2276 #define EEPROM_WORD0A_ILOS   0x0010
2277 #define EEPROM_WORD0A_SWDPIO 0x01E0
2278 #define EEPROM_WORD0A_LRST   0x0200
2279 #define EEPROM_WORD0A_FD     0x0400
2280 #define EEPROM_WORD0A_66MHZ  0x0800
2281
2282 /* Mask bits for fields in Word 0x0f of the EEPROM */
2283 #define EEPROM_WORD0F_PAUSE_MASK 0x3000
2284 #define EEPROM_WORD0F_PAUSE      0x1000
2285 #define EEPROM_WORD0F_ASM_DIR    0x2000
2286 #define EEPROM_WORD0F_ANE        0x0800
2287 #define EEPROM_WORD0F_SWPDIO_EXT 0x00F0
2288 #define EEPROM_WORD0F_LPLU       0x0001
2289
2290 /* Mask bits for fields in Word 0x10/0x20 of the EEPROM */
2291 #define EEPROM_WORD1020_GIGA_DISABLE         0x0010
2292 #define EEPROM_WORD1020_GIGA_DISABLE_NON_D0A 0x0008
2293
2294 /* Mask bits for fields in Word 0x1a of the EEPROM */
2295 #define EEPROM_WORD1A_ASPM_MASK  0x000C
2296
2297 /* For checksumming, the sum of all words in the EEPROM should equal 0xBABA. */
2298 #define EEPROM_SUM 0xBABA
2299
2300 /* EEPROM Map defines (WORD OFFSETS)*/
2301 #define EEPROM_NODE_ADDRESS_BYTE_0 0
2302 #define EEPROM_PBA_BYTE_1          8
2303
2304 #define EEPROM_RESERVED_WORD          0xFFFF
2305
2306 /* EEPROM Map Sizes (Byte Counts) */
2307 #define PBA_SIZE 4
2308
2309 /* Collision related configuration parameters */
2310 #define E1000_COLLISION_THRESHOLD       15
2311 #define E1000_CT_SHIFT                  4
2312 /* Collision distance is a 0-based value that applies to
2313  * half-duplex-capable hardware only. */
2314 #define E1000_COLLISION_DISTANCE        63
2315 #define E1000_COLLISION_DISTANCE_82542  64
2316 #define E1000_FDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
2317 #define E1000_HDX_COLLISION_DISTANCE    E1000_COLLISION_DISTANCE
2318 #define E1000_COLD_SHIFT                12
2319
2320 /* Number of Transmit and Receive Descriptors must be a multiple of 8 */
2321 #define REQ_TX_DESCRIPTOR_MULTIPLE  8
2322 #define REQ_RX_DESCRIPTOR_MULTIPLE  8
2323
2324 /* Default values for the transmit IPG register */
2325 #define DEFAULT_82542_TIPG_IPGT        10
2326 #define DEFAULT_82543_TIPG_IPGT_FIBER  9
2327 #define DEFAULT_82543_TIPG_IPGT_COPPER 8
2328
2329 #define E1000_TIPG_IPGT_MASK  0x000003FF
2330 #define E1000_TIPG_IPGR1_MASK 0x000FFC00
2331 #define E1000_TIPG_IPGR2_MASK 0x3FF00000
2332
2333 #define DEFAULT_82542_TIPG_IPGR1 2
2334 #define DEFAULT_82543_TIPG_IPGR1 8
2335 #define E1000_TIPG_IPGR1_SHIFT  10
2336
2337 #define DEFAULT_82542_TIPG_IPGR2 10
2338 #define DEFAULT_82543_TIPG_IPGR2 6
2339 #define E1000_TIPG_IPGR2_SHIFT  20
2340
2341 #define E1000_TXDMAC_DPP 0x00000001
2342
2343 /* Adaptive IFS defines */
2344 #define TX_THRESHOLD_START     8
2345 #define TX_THRESHOLD_INCREMENT 10
2346 #define TX_THRESHOLD_DECREMENT 1
2347 #define TX_THRESHOLD_STOP      190
2348 #define TX_THRESHOLD_DISABLE   0
2349 #define TX_THRESHOLD_TIMER_MS  10000
2350 #define MIN_NUM_XMITS          1000
2351 #define IFS_MAX                80
2352 #define IFS_STEP               10
2353 #define IFS_MIN                40
2354 #define IFS_RATIO              4
2355
2356 /* Extended Configuration Control and Size */
2357 #define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001
2358 #define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE  0x00000002
2359 #define E1000_EXTCNF_CTRL_D_UD_ENABLE       0x00000004
2360 #define E1000_EXTCNF_CTRL_D_UD_LATENCY      0x00000008
2361 #define E1000_EXTCNF_CTRL_D_UD_OWNER        0x00000010
2362 #define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020
2363 #define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040
2364 #define E1000_EXTCNF_CTRL_EXT_CNF_POINTER   0x0FFF0000
2365
2366 #define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH    0x000000FF
2367 #define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH   0x0000FF00
2368 #define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH   0x00FF0000
2369 #define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE  0x00000001
2370 #define E1000_EXTCNF_CTRL_SWFLAG            0x00000020
2371
2372 /* PBA constants */
2373 #define E1000_PBA_8K 0x0008     /* 8KB, default Rx allocation */
2374 #define E1000_PBA_12K 0x000C    /* 12KB, default Rx allocation */
2375 #define E1000_PBA_16K 0x0010    /* 16KB, default TX allocation */
2376 #define E1000_PBA_20K 0x0014
2377 #define E1000_PBA_22K 0x0016
2378 #define E1000_PBA_24K 0x0018
2379 #define E1000_PBA_30K 0x001E
2380 #define E1000_PBA_32K 0x0020
2381 #define E1000_PBA_34K 0x0022
2382 #define E1000_PBA_38K 0x0026
2383 #define E1000_PBA_40K 0x0028
2384 #define E1000_PBA_48K 0x0030    /* 48KB, default RX allocation */
2385
2386 #define E1000_PBS_16K E1000_PBA_16K
2387
2388 /* Flow Control Constants */
2389 #define FLOW_CONTROL_ADDRESS_LOW  0x00C28001
2390 #define FLOW_CONTROL_ADDRESS_HIGH 0x00000100
2391 #define FLOW_CONTROL_TYPE         0x8808
2392
2393 /* The historical defaults for the flow control values are given below. */
2394 #define FC_DEFAULT_HI_THRESH        (0x8000)    /* 32KB */
2395 #define FC_DEFAULT_LO_THRESH        (0x4000)    /* 16KB */
2396 #define FC_DEFAULT_TX_TIMER         (0x100)     /* ~130 us */
2397
2398 /* PCIX Config space */
2399 #define PCIX_COMMAND_REGISTER    0xE6
2400 #define PCIX_STATUS_REGISTER_LO  0xE8
2401 #define PCIX_STATUS_REGISTER_HI  0xEA
2402
2403 #define PCIX_COMMAND_MMRBC_MASK      0x000C
2404 #define PCIX_COMMAND_MMRBC_SHIFT     0x2
2405 #define PCIX_STATUS_HI_MMRBC_MASK    0x0060
2406 #define PCIX_STATUS_HI_MMRBC_SHIFT   0x5
2407 #define PCIX_STATUS_HI_MMRBC_4K      0x3
2408 #define PCIX_STATUS_HI_MMRBC_2K      0x2
2409
2410 /* Number of bits required to shift right the "pause" bits from the
2411  * EEPROM (bits 13:12) to the "pause" (bits 8:7) field in the TXCW register.
2412  */
2413 #define PAUSE_SHIFT 5
2414
2415 /* Number of bits required to shift left the "SWDPIO" bits from the
2416  * EEPROM (bits 8:5) to the "SWDPIO" (bits 25:22) field in the CTRL register.
2417  */
2418 #define SWDPIO_SHIFT 17
2419
2420 /* Number of bits required to shift left the "SWDPIO_EXT" bits from the
2421  * EEPROM word F (bits 7:4) to the bits 11:8 of The Extended CTRL register.
2422  */
2423 #define SWDPIO__EXT_SHIFT 4
2424
2425 /* Number of bits required to shift left the "ILOS" bit from the EEPROM
2426  * (bit 4) to the "ILOS" (bit 7) field in the CTRL register.
2427  */
2428 #define ILOS_SHIFT  3
2429
2430 #define RECEIVE_BUFFER_ALIGN_SIZE  (256)
2431
2432 /* Number of milliseconds we wait for auto-negotiation to complete */
2433 #define LINK_UP_TIMEOUT             500
2434
2435 /* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */
2436 #define AUTO_READ_DONE_TIMEOUT      10
2437 /* Number of milliseconds we wait for PHY configuration done after MAC reset */
2438 #define PHY_CFG_TIMEOUT             100
2439
2440 #define E1000_TX_BUFFER_SIZE ((u32)1514)
2441
2442 /* The carrier extension symbol, as received by the NIC. */
2443 #define CARRIER_EXTENSION   0x0F
2444
2445 /* TBI_ACCEPT macro definition:
2446  *
2447  * This macro requires:
2448  *      adapter = a pointer to struct e1000_hw
2449  *      status = the 8 bit status field of the RX descriptor with EOP set
2450  *      error = the 8 bit error field of the RX descriptor with EOP set
2451  *      length = the sum of all the length fields of the RX descriptors that
2452  *               make up the current frame
2453  *      last_byte = the last byte of the frame DMAed by the hardware
2454  *      max_frame_length = the maximum frame length we want to accept.
2455  *      min_frame_length = the minimum frame length we want to accept.
2456  *
2457  * This macro is a conditional that should be used in the interrupt
2458  * handler's Rx processing routine when RxErrors have been detected.
2459  *
2460  * Typical use:
2461  *  ...
2462  *  if (TBI_ACCEPT) {
2463  *      accept_frame = true;
2464  *      e1000_tbi_adjust_stats(adapter, MacAddress);
2465  *      frame_length--;
2466  *  } else {
2467  *      accept_frame = false;
2468  *  }
2469  *  ...
2470  */
2471
2472 #define TBI_ACCEPT(adapter, status, errors, length, last_byte) \
2473     ((adapter)->tbi_compatibility_on && \
2474      (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \
2475      ((last_byte) == CARRIER_EXTENSION) && \
2476      (((status) & E1000_RXD_STAT_VP) ? \
2477           (((length) > ((adapter)->min_frame_size - VLAN_TAG_SIZE)) && \
2478            ((length) <= ((adapter)->max_frame_size + 1))) : \
2479           (((length) > (adapter)->min_frame_size) && \
2480            ((length) <= ((adapter)->max_frame_size + VLAN_TAG_SIZE + 1)))))
2481
2482 /* Structures, enums, and macros for the PHY */
2483
2484 /* Bit definitions for the Management Data IO (MDIO) and Management Data
2485  * Clock (MDC) pins in the Device Control Register.
2486  */
2487 #define E1000_CTRL_PHY_RESET_DIR  E1000_CTRL_SWDPIO0
2488 #define E1000_CTRL_PHY_RESET      E1000_CTRL_SWDPIN0
2489 #define E1000_CTRL_MDIO_DIR       E1000_CTRL_SWDPIO2
2490 #define E1000_CTRL_MDIO           E1000_CTRL_SWDPIN2
2491 #define E1000_CTRL_MDC_DIR        E1000_CTRL_SWDPIO3
2492 #define E1000_CTRL_MDC            E1000_CTRL_SWDPIN3
2493 #define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR
2494 #define E1000_CTRL_PHY_RESET4     E1000_CTRL_EXT_SDP4_DATA
2495
2496 /* PHY 1000 MII Register/Bit Definitions */
2497 /* PHY Registers defined by IEEE */
2498 #define PHY_CTRL         0x00   /* Control Register */
2499 #define PHY_STATUS       0x01   /* Status Register */
2500 #define PHY_ID1          0x02   /* Phy Id Reg (word 1) */
2501 #define PHY_ID2          0x03   /* Phy Id Reg (word 2) */
2502 #define PHY_AUTONEG_ADV  0x04   /* Autoneg Advertisement */
2503 #define PHY_LP_ABILITY   0x05   /* Link Partner Ability (Base Page) */
2504 #define PHY_AUTONEG_EXP  0x06   /* Autoneg Expansion Reg */
2505 #define PHY_NEXT_PAGE_TX 0x07   /* Next Page TX */
2506 #define PHY_LP_NEXT_PAGE 0x08   /* Link Partner Next Page */
2507 #define PHY_1000T_CTRL   0x09   /* 1000Base-T Control Reg */
2508 #define PHY_1000T_STATUS 0x0A   /* 1000Base-T Status Reg */
2509 #define PHY_EXT_STATUS   0x0F   /* Extended Status Reg */
2510
2511 #define MAX_PHY_REG_ADDRESS        0x1F /* 5 bit address bus (0-0x1F) */
2512 #define MAX_PHY_MULTI_PAGE_REG     0xF  /* Registers equal on all pages */
2513
2514 /* M88E1000 Specific Registers */
2515 #define M88E1000_PHY_SPEC_CTRL     0x10 /* PHY Specific Control Register */
2516 #define M88E1000_PHY_SPEC_STATUS   0x11 /* PHY Specific Status Register */
2517 #define M88E1000_INT_ENABLE        0x12 /* Interrupt Enable Register */
2518 #define M88E1000_INT_STATUS        0x13 /* Interrupt Status Register */
2519 #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Control */
2520 #define M88E1000_RX_ERR_CNTR       0x15 /* Receive Error Counter */
2521
2522 #define M88E1000_PHY_EXT_CTRL      0x1A /* PHY extend control register */
2523 #define M88E1000_PHY_PAGE_SELECT   0x1D /* Reg 29 for page number setting */
2524 #define M88E1000_PHY_GEN_CONTROL   0x1E /* Its meaning depends on reg 29 */
2525 #define M88E1000_PHY_VCO_REG_BIT8  0x100        /* Bits 8 & 11 are adjusted for */
2526 #define M88E1000_PHY_VCO_REG_BIT11 0x800        /* improved BER performance */
2527
2528 #define IGP01E1000_IEEE_REGS_PAGE  0x0000
2529 #define IGP01E1000_IEEE_RESTART_AUTONEG 0x3300
2530 #define IGP01E1000_IEEE_FORCE_GIGA      0x0140
2531
2532 /* IGP01E1000 Specific Registers */
2533 #define IGP01E1000_PHY_PORT_CONFIG 0x10 /* PHY Specific Port Config Register */
2534 #define IGP01E1000_PHY_PORT_STATUS 0x11 /* PHY Specific Status Register */
2535 #define IGP01E1000_PHY_PORT_CTRL   0x12 /* PHY Specific Control Register */
2536 #define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */
2537 #define IGP01E1000_GMII_FIFO       0x14 /* GMII FIFO Register */
2538 #define IGP01E1000_PHY_CHANNEL_QUALITY 0x15     /* PHY Channel Quality Register */
2539 #define IGP02E1000_PHY_POWER_MGMT      0x19
2540 #define IGP01E1000_PHY_PAGE_SELECT     0x1F     /* PHY Page Select Core Register */
2541
2542 /* IGP01E1000 AGC Registers - stores the cable length values*/
2543 #define IGP01E1000_PHY_AGC_A        0x1172
2544 #define IGP01E1000_PHY_AGC_B        0x1272
2545 #define IGP01E1000_PHY_AGC_C        0x1472
2546 #define IGP01E1000_PHY_AGC_D        0x1872
2547
2548 /* IGP02E1000 AGC Registers for cable length values */
2549 #define IGP02E1000_PHY_AGC_A        0x11B1
2550 #define IGP02E1000_PHY_AGC_B        0x12B1
2551 #define IGP02E1000_PHY_AGC_C        0x14B1
2552 #define IGP02E1000_PHY_AGC_D        0x18B1
2553
2554 /* IGP01E1000 DSP Reset Register */
2555 #define IGP01E1000_PHY_DSP_RESET   0x1F33
2556 #define IGP01E1000_PHY_DSP_SET     0x1F71
2557 #define IGP01E1000_PHY_DSP_FFE     0x1F35
2558
2559 #define IGP01E1000_PHY_CHANNEL_NUM    4
2560 #define IGP02E1000_PHY_CHANNEL_NUM    4
2561
2562 #define IGP01E1000_PHY_AGC_PARAM_A    0x1171
2563 #define IGP01E1000_PHY_AGC_PARAM_B    0x1271
2564 #define IGP01E1000_PHY_AGC_PARAM_C    0x1471
2565 #define IGP01E1000_PHY_AGC_PARAM_D    0x1871
2566
2567 #define IGP01E1000_PHY_EDAC_MU_INDEX        0xC000
2568 #define IGP01E1000_PHY_EDAC_SIGN_EXT_9_BITS 0x8000
2569
2570 #define IGP01E1000_PHY_ANALOG_TX_STATE      0x2890
2571 #define IGP01E1000_PHY_ANALOG_CLASS_A       0x2000
2572 #define IGP01E1000_PHY_FORCE_ANALOG_ENABLE  0x0004
2573 #define IGP01E1000_PHY_DSP_FFE_CM_CP        0x0069
2574
2575 #define IGP01E1000_PHY_DSP_FFE_DEFAULT      0x002A
2576 /* IGP01E1000 PCS Initialization register - stores the polarity status when
2577  * speed = 1000 Mbps. */
2578 #define IGP01E1000_PHY_PCS_INIT_REG  0x00B4
2579 #define IGP01E1000_PHY_PCS_CTRL_REG  0x00B5
2580
2581 #define IGP01E1000_ANALOG_REGS_PAGE  0x20C0
2582
2583 /* PHY Control Register */
2584 #define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
2585 #define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
2586 #define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
2587 #define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
2588 #define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
2589 #define MII_CR_POWER_DOWN       0x0800  /* Power down */
2590 #define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
2591 #define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
2592 #define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
2593 #define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
2594
2595 /* PHY Status Register */
2596 #define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
2597 #define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
2598 #define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
2599 #define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
2600 #define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
2601 #define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
2602 #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
2603 #define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
2604 #define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
2605 #define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
2606 #define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
2607 #define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
2608 #define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
2609 #define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
2610 #define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
2611
2612 /* Autoneg Advertisement Register */
2613 #define NWAY_AR_SELECTOR_FIELD 0x0001   /* indicates IEEE 802.3 CSMA/CD */
2614 #define NWAY_AR_10T_HD_CAPS    0x0020   /* 10T   Half Duplex Capable */
2615 #define NWAY_AR_10T_FD_CAPS    0x0040   /* 10T   Full Duplex Capable */
2616 #define NWAY_AR_100TX_HD_CAPS  0x0080   /* 100TX Half Duplex Capable */
2617 #define NWAY_AR_100TX_FD_CAPS  0x0100   /* 100TX Full Duplex Capable */
2618 #define NWAY_AR_100T4_CAPS     0x0200   /* 100T4 Capable */
2619 #define NWAY_AR_PAUSE          0x0400   /* Pause operation desired */
2620 #define NWAY_AR_ASM_DIR        0x0800   /* Asymmetric Pause Direction bit */
2621 #define NWAY_AR_REMOTE_FAULT   0x2000   /* Remote Fault detected */
2622 #define NWAY_AR_NEXT_PAGE      0x8000   /* Next Page ability supported */
2623
2624 /* Link Partner Ability Register (Base Page) */
2625 #define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */
2626 #define NWAY_LPAR_10T_HD_CAPS    0x0020 /* LP is 10T   Half Duplex Capable */
2627 #define NWAY_LPAR_10T_FD_CAPS    0x0040 /* LP is 10T   Full Duplex Capable */
2628 #define NWAY_LPAR_100TX_HD_CAPS  0x0080 /* LP is 100TX Half Duplex Capable */
2629 #define NWAY_LPAR_100TX_FD_CAPS  0x0100 /* LP is 100TX Full Duplex Capable */
2630 #define NWAY_LPAR_100T4_CAPS     0x0200 /* LP is 100T4 Capable */
2631 #define NWAY_LPAR_PAUSE          0x0400 /* LP Pause operation desired */
2632 #define NWAY_LPAR_ASM_DIR        0x0800 /* LP Asymmetric Pause Direction bit */
2633 #define NWAY_LPAR_REMOTE_FAULT   0x2000 /* LP has detected Remote Fault */
2634 #define NWAY_LPAR_ACKNOWLEDGE    0x4000 /* LP has rx'd link code word */
2635 #define NWAY_LPAR_NEXT_PAGE      0x8000 /* Next Page ability supported */
2636
2637 /* Autoneg Expansion Register */
2638 #define NWAY_ER_LP_NWAY_CAPS      0x0001        /* LP has Auto Neg Capability */
2639 #define NWAY_ER_PAGE_RXD          0x0002        /* LP is 10T   Half Duplex Capable */
2640 #define NWAY_ER_NEXT_PAGE_CAPS    0x0004        /* LP is 10T   Full Duplex Capable */
2641 #define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008        /* LP is 100TX Half Duplex Capable */
2642 #define NWAY_ER_PAR_DETECT_FAULT  0x0010        /* LP is 100TX Full Duplex Capable */
2643
2644 /* Next Page TX Register */
2645 #define NPTX_MSG_CODE_FIELD 0x0001      /* NP msg code or unformatted data */
2646 #define NPTX_TOGGLE         0x0800      /* Toggles between exchanges
2647                                          * of different NP
2648                                          */
2649 #define NPTX_ACKNOWLDGE2    0x1000      /* 1 = will comply with msg
2650                                          * 0 = cannot comply with msg
2651                                          */
2652 #define NPTX_MSG_PAGE       0x2000      /* formatted(1)/unformatted(0) pg */
2653 #define NPTX_NEXT_PAGE      0x8000      /* 1 = addition NP will follow
2654                                          * 0 = sending last NP
2655                                          */
2656
2657 /* Link Partner Next Page Register */
2658 #define LP_RNPR_MSG_CODE_FIELD 0x0001   /* NP msg code or unformatted data */
2659 #define LP_RNPR_TOGGLE         0x0800   /* Toggles between exchanges
2660                                          * of different NP
2661                                          */
2662 #define LP_RNPR_ACKNOWLDGE2    0x1000   /* 1 = will comply with msg
2663                                          * 0 = cannot comply with msg
2664                                          */
2665 #define LP_RNPR_MSG_PAGE       0x2000   /* formatted(1)/unformatted(0) pg */
2666 #define LP_RNPR_ACKNOWLDGE     0x4000   /* 1 = ACK / 0 = NO ACK */
2667 #define LP_RNPR_NEXT_PAGE      0x8000   /* 1 = addition NP will follow
2668                                          * 0 = sending last NP
2669                                          */
2670
2671 /* 1000BASE-T Control Register */
2672 #define CR_1000T_ASYM_PAUSE      0x0080 /* Advertise asymmetric pause bit */
2673 #define CR_1000T_HD_CAPS         0x0100 /* Advertise 1000T HD capability */
2674 #define CR_1000T_FD_CAPS         0x0200 /* Advertise 1000T FD capability  */
2675 #define CR_1000T_REPEATER_DTE    0x0400 /* 1=Repeater/switch device port */
2676                                         /* 0=DTE device */
2677 #define CR_1000T_MS_VALUE        0x0800 /* 1=Configure PHY as Master */
2678                                         /* 0=Configure PHY as Slave */
2679 #define CR_1000T_MS_ENABLE       0x1000 /* 1=Master/Slave manual config value */
2680                                         /* 0=Automatic Master/Slave config */
2681 #define CR_1000T_TEST_MODE_NORMAL 0x0000        /* Normal Operation */
2682 #define CR_1000T_TEST_MODE_1     0x2000 /* Transmit Waveform test */
2683 #define CR_1000T_TEST_MODE_2     0x4000 /* Master Transmit Jitter test */
2684 #define CR_1000T_TEST_MODE_3     0x6000 /* Slave Transmit Jitter test */
2685 #define CR_1000T_TEST_MODE_4     0x8000 /* Transmitter Distortion test */
2686
2687 /* 1000BASE-T Status Register */
2688 #define SR_1000T_IDLE_ERROR_CNT   0x00FF        /* Num idle errors since last read */
2689 #define SR_1000T_ASYM_PAUSE_DIR   0x0100        /* LP asymmetric pause direction bit */
2690 #define SR_1000T_LP_HD_CAPS       0x0400        /* LP is 1000T HD capable */
2691 #define SR_1000T_LP_FD_CAPS       0x0800        /* LP is 1000T FD capable */
2692 #define SR_1000T_REMOTE_RX_STATUS 0x1000        /* Remote receiver OK */
2693 #define SR_1000T_LOCAL_RX_STATUS  0x2000        /* Local receiver OK */
2694 #define SR_1000T_MS_CONFIG_RES    0x4000        /* 1=Local TX is Master, 0=Slave */
2695 #define SR_1000T_MS_CONFIG_FAULT  0x8000        /* Master/Slave config fault */
2696 #define SR_1000T_REMOTE_RX_STATUS_SHIFT          12
2697 #define SR_1000T_LOCAL_RX_STATUS_SHIFT           13
2698 #define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT    5
2699 #define FFE_IDLE_ERR_COUNT_TIMEOUT_20            20
2700 #define FFE_IDLE_ERR_COUNT_TIMEOUT_100           100
2701
2702 /* Extended Status Register */
2703 #define IEEE_ESR_1000T_HD_CAPS 0x1000   /* 1000T HD capable */
2704 #define IEEE_ESR_1000T_FD_CAPS 0x2000   /* 1000T FD capable */
2705 #define IEEE_ESR_1000X_HD_CAPS 0x4000   /* 1000X HD capable */
2706 #define IEEE_ESR_1000X_FD_CAPS 0x8000   /* 1000X FD capable */
2707
2708 #define PHY_TX_POLARITY_MASK   0x0100   /* register 10h bit 8 (polarity bit) */
2709 #define PHY_TX_NORMAL_POLARITY 0        /* register 10h bit 8 (normal polarity) */
2710
2711 #define AUTO_POLARITY_DISABLE  0x0010   /* register 11h bit 4 */
2712                                       /* (0=enable, 1=disable) */
2713
2714 /* M88E1000 PHY Specific Control Register */
2715 #define M88E1000_PSCR_JABBER_DISABLE    0x0001  /* 1=Jabber Function disabled */
2716 #define M88E1000_PSCR_POLARITY_REVERSAL 0x0002  /* 1=Polarity Reversal enabled */
2717 #define M88E1000_PSCR_SQE_TEST          0x0004  /* 1=SQE Test enabled */
2718 #define M88E1000_PSCR_CLK125_DISABLE    0x0010  /* 1=CLK125 low,
2719                                                  * 0=CLK125 toggling
2720                                                  */
2721 #define M88E1000_PSCR_MDI_MANUAL_MODE  0x0000   /* MDI Crossover Mode bits 6:5 */
2722                                                /* Manual MDI configuration */
2723 #define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020   /* Manual MDIX configuration */
2724 #define M88E1000_PSCR_AUTO_X_1000T     0x0040   /* 1000BASE-T: Auto crossover,
2725                                                  *  100BASE-TX/10BASE-T:
2726                                                  *  MDI Mode
2727                                                  */
2728 #define M88E1000_PSCR_AUTO_X_MODE      0x0060   /* Auto crossover enabled
2729                                                  * all speeds.
2730                                                  */
2731 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE 0x0080
2732                                         /* 1=Enable Extended 10BASE-T distance
2733                                          * (Lower 10BASE-T RX Threshold)
2734                                          * 0=Normal 10BASE-T RX Threshold */
2735 #define M88E1000_PSCR_MII_5BIT_ENABLE      0x0100
2736                                         /* 1=5-Bit interface in 100BASE-TX
2737                                          * 0=MII interface in 100BASE-TX */
2738 #define M88E1000_PSCR_SCRAMBLER_DISABLE    0x0200       /* 1=Scrambler disable */
2739 #define M88E1000_PSCR_FORCE_LINK_GOOD      0x0400       /* 1=Force link good */
2740 #define M88E1000_PSCR_ASSERT_CRS_ON_TX     0x0800       /* 1=Assert CRS on Transmit */
2741
2742 #define M88E1000_PSCR_POLARITY_REVERSAL_SHIFT    1
2743 #define M88E1000_PSCR_AUTO_X_MODE_SHIFT          5
2744 #define M88E1000_PSCR_10BT_EXT_DIST_ENABLE_SHIFT 7
2745
2746 /* M88E1000 PHY Specific Status Register */
2747 #define M88E1000_PSSR_JABBER             0x0001 /* 1=Jabber */
2748 #define M88E1000_PSSR_REV_POLARITY       0x0002 /* 1=Polarity reversed */
2749 #define M88E1000_PSSR_DOWNSHIFT          0x0020 /* 1=Downshifted */
2750 #define M88E1000_PSSR_MDIX               0x0040 /* 1=MDIX; 0=MDI */
2751 #define M88E1000_PSSR_CABLE_LENGTH       0x0380 /* 0=<50M;1=50-80M;2=80-110M;
2752                                                  * 3=110-140M;4=>140M */
2753 #define M88E1000_PSSR_LINK               0x0400 /* 1=Link up, 0=Link down */
2754 #define M88E1000_PSSR_SPD_DPLX_RESOLVED  0x0800 /* 1=Speed & Duplex resolved */
2755 #define M88E1000_PSSR_PAGE_RCVD          0x1000 /* 1=Page received */
2756 #define M88E1000_PSSR_DPLX               0x2000 /* 1=Duplex 0=Half Duplex */
2757 #define M88E1000_PSSR_SPEED              0xC000 /* Speed, bits 14:15 */
2758 #define M88E1000_PSSR_10MBS              0x0000 /* 00=10Mbs */
2759 #define M88E1000_PSSR_100MBS             0x4000 /* 01=100Mbs */
2760 #define M88E1000_PSSR_1000MBS            0x8000 /* 10=1000Mbs */
2761
2762 #define M88E1000_PSSR_REV_POLARITY_SHIFT 1
2763 #define M88E1000_PSSR_DOWNSHIFT_SHIFT    5
2764 #define M88E1000_PSSR_MDIX_SHIFT         6
2765 #define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7
2766
2767 /* M88E1000 Extended PHY Specific Control Register */
2768 #define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000    /* 1=Fiber loopback */
2769 #define M88E1000_EPSCR_DOWN_NO_IDLE   0x8000    /* 1=Lost lock detect enabled.
2770                                                  * Will assert lost lock and bring
2771                                                  * link down if idle not seen
2772                                                  * within 1ms in 1000BASE-T
2773                                                  */
2774 /* Number of times we will attempt to autonegotiate before downshifting if we
2775  * are the master */
2776 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00
2777 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X   0x0000
2778 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X   0x0400
2779 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X   0x0800
2780 #define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X   0x0C00
2781 /* Number of times we will attempt to autonegotiate before downshifting if we
2782  * are the slave */
2783 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK  0x0300
2784 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS   0x0000
2785 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X    0x0100
2786 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X    0x0200
2787 #define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X    0x0300
2788 #define M88E1000_EPSCR_TX_CLK_2_5     0x0060    /* 2.5 MHz TX_CLK */
2789 #define M88E1000_EPSCR_TX_CLK_25      0x0070    /* 25  MHz TX_CLK */
2790 #define M88E1000_EPSCR_TX_CLK_0       0x0000    /* NO  TX_CLK */
2791
2792 /* M88EC018 Rev 2 specific DownShift settings */
2793 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK  0x0E00
2794 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X    0x0000
2795 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X    0x0200
2796 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X    0x0400
2797 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X    0x0600
2798 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X    0x0800
2799 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X    0x0A00
2800 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X    0x0C00
2801 #define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X    0x0E00
2802
2803 /* IGP01E1000 Specific Port Config Register - R/W */
2804 #define IGP01E1000_PSCFR_AUTO_MDIX_PAR_DETECT  0x0010
2805 #define IGP01E1000_PSCFR_PRE_EN                0x0020
2806 #define IGP01E1000_PSCFR_SMART_SPEED           0x0080
2807 #define IGP01E1000_PSCFR_DISABLE_TPLOOPBACK    0x0100
2808 #define IGP01E1000_PSCFR_DISABLE_JABBER        0x0400
2809 #define IGP01E1000_PSCFR_DISABLE_TRANSMIT      0x2000
2810
2811 /* IGP01E1000 Specific Port Status Register - R/O */
2812 #define IGP01E1000_PSSR_AUTONEG_FAILED         0x0001   /* RO LH SC */
2813 #define IGP01E1000_PSSR_POLARITY_REVERSED      0x0002
2814 #define IGP01E1000_PSSR_CABLE_LENGTH           0x007C
2815 #define IGP01E1000_PSSR_FULL_DUPLEX            0x0200
2816 #define IGP01E1000_PSSR_LINK_UP                0x0400
2817 #define IGP01E1000_PSSR_MDIX                   0x0800
2818 #define IGP01E1000_PSSR_SPEED_MASK             0xC000   /* speed bits mask */
2819 #define IGP01E1000_PSSR_SPEED_10MBPS           0x4000
2820 #define IGP01E1000_PSSR_SPEED_100MBPS          0x8000
2821 #define IGP01E1000_PSSR_SPEED_1000MBPS         0xC000
2822 #define IGP01E1000_PSSR_CABLE_LENGTH_SHIFT     0x0002   /* shift right 2 */
2823 #define IGP01E1000_PSSR_MDIX_SHIFT             0x000B   /* shift right 11 */
2824
2825 /* IGP01E1000 Specific Port Control Register - R/W */
2826 #define IGP01E1000_PSCR_TP_LOOPBACK            0x0010
2827 #define IGP01E1000_PSCR_CORRECT_NC_SCMBLR      0x0200
2828 #define IGP01E1000_PSCR_TEN_CRS_SELECT         0x0400
2829 #define IGP01E1000_PSCR_FLIP_CHIP              0x0800
2830 #define IGP01E1000_PSCR_AUTO_MDIX              0x1000
2831 #define IGP01E1000_PSCR_FORCE_MDI_MDIX         0x2000   /* 0-MDI, 1-MDIX */
2832
2833 /* IGP01E1000 Specific Port Link Health Register */
2834 #define IGP01E1000_PLHR_SS_DOWNGRADE           0x8000
2835 #define IGP01E1000_PLHR_GIG_SCRAMBLER_ERROR    0x4000
2836 #define IGP01E1000_PLHR_MASTER_FAULT           0x2000
2837 #define IGP01E1000_PLHR_MASTER_RESOLUTION      0x1000
2838 #define IGP01E1000_PLHR_GIG_REM_RCVR_NOK       0x0800   /* LH */
2839 #define IGP01E1000_PLHR_IDLE_ERROR_CNT_OFLOW   0x0400   /* LH */
2840 #define IGP01E1000_PLHR_DATA_ERR_1             0x0200   /* LH */
2841 #define IGP01E1000_PLHR_DATA_ERR_0             0x0100
2842 #define IGP01E1000_PLHR_AUTONEG_FAULT          0x0040
2843 #define IGP01E1000_PLHR_AUTONEG_ACTIVE         0x0010
2844 #define IGP01E1000_PLHR_VALID_CHANNEL_D        0x0008
2845 #define IGP01E1000_PLHR_VALID_CHANNEL_C        0x0004
2846 #define IGP01E1000_PLHR_VALID_CHANNEL_B        0x0002
2847 #define IGP01E1000_PLHR_VALID_CHANNEL_A        0x0001
2848
2849 /* IGP01E1000 Channel Quality Register */
2850 #define IGP01E1000_MSE_CHANNEL_D        0x000F
2851 #define IGP01E1000_MSE_CHANNEL_C        0x00F0
2852 #define IGP01E1000_MSE_CHANNEL_B        0x0F00
2853 #define IGP01E1000_MSE_CHANNEL_A        0xF000
2854
2855 #define IGP02E1000_PM_SPD                         0x0001        /* Smart Power Down */
2856 #define IGP02E1000_PM_D3_LPLU                     0x0004        /* Enable LPLU in non-D0a modes */
2857 #define IGP02E1000_PM_D0_LPLU                     0x0002        /* Enable LPLU in D0a mode */
2858
2859 /* IGP01E1000 DSP reset macros */
2860 #define DSP_RESET_ENABLE     0x0
2861 #define DSP_RESET_DISABLE    0x2
2862 #define E1000_MAX_DSP_RESETS 10
2863
2864 /* IGP01E1000 & IGP02E1000 AGC Registers */
2865
2866 #define IGP01E1000_AGC_LENGTH_SHIFT 7   /* Coarse - 13:11, Fine - 10:7 */
2867 #define IGP02E1000_AGC_LENGTH_SHIFT 9   /* Coarse - 15:13, Fine - 12:9 */
2868
2869 /* IGP02E1000 AGC Register Length 9-bit mask */
2870 #define IGP02E1000_AGC_LENGTH_MASK  0x7F
2871
2872 /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */
2873 #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128
2874 #define IGP02E1000_AGC_LENGTH_TABLE_SIZE 113
2875
2876 /* The precision error of the cable length is +/- 10 meters */
2877 #define IGP01E1000_AGC_RANGE    10
2878 #define IGP02E1000_AGC_RANGE    15
2879
2880 /* IGP01E1000 PCS Initialization register */
2881 /* bits 3:6 in the PCS registers stores the channels polarity */
2882 #define IGP01E1000_PHY_POLARITY_MASK    0x0078
2883
2884 /* IGP01E1000 GMII FIFO Register */
2885 #define IGP01E1000_GMII_FLEX_SPD               0x10     /* Enable flexible speed
2886                                                          * on Link-Up */
2887 #define IGP01E1000_GMII_SPD                    0x20     /* Enable SPD */
2888
2889 /* IGP01E1000 Analog Register */
2890 #define IGP01E1000_ANALOG_SPARE_FUSE_STATUS       0x20D1
2891 #define IGP01E1000_ANALOG_FUSE_STATUS             0x20D0
2892 #define IGP01E1000_ANALOG_FUSE_CONTROL            0x20DC
2893 #define IGP01E1000_ANALOG_FUSE_BYPASS             0x20DE
2894
2895 #define IGP01E1000_ANALOG_FUSE_POLY_MASK            0xF000
2896 #define IGP01E1000_ANALOG_FUSE_FINE_MASK            0x0F80
2897 #define IGP01E1000_ANALOG_FUSE_COARSE_MASK          0x0070
2898 #define IGP01E1000_ANALOG_SPARE_FUSE_ENABLED        0x0100
2899 #define IGP01E1000_ANALOG_FUSE_ENABLE_SW_CONTROL    0x0002
2900
2901 #define IGP01E1000_ANALOG_FUSE_COARSE_THRESH        0x0040
2902 #define IGP01E1000_ANALOG_FUSE_COARSE_10            0x0010
2903 #define IGP01E1000_ANALOG_FUSE_FINE_1               0x0080
2904 #define IGP01E1000_ANALOG_FUSE_FINE_10              0x0500
2905
2906 /* Bit definitions for valid PHY IDs. */
2907 /* I = Integrated
2908  * E = External
2909  */
2910 #define M88_VENDOR         0x0141
2911 #define M88E1000_E_PHY_ID  0x01410C50
2912 #define M88E1000_I_PHY_ID  0x01410C30
2913 #define M88E1011_I_PHY_ID  0x01410C20
2914 #define IGP01E1000_I_PHY_ID  0x02A80380
2915 #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID
2916 #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID
2917 #define M88E1011_I_REV_4   0x04
2918 #define M88E1111_I_PHY_ID  0x01410CC0
2919 #define M88E1118_E_PHY_ID  0x01410E40
2920 #define L1LXT971A_PHY_ID   0x001378E0
2921
2922 #define RTL8211B_PHY_ID    0x001CC910
2923 #define RTL8201N_PHY_ID    0x8200
2924 #define RTL_PHY_CTRL_FD    0x0100 /* Full duplex.0=half; 1=full */
2925 #define RTL_PHY_CTRL_SPD_100    0x200000 /* Force 100Mb */
2926
2927 /* Bits...
2928  * 15-5: page
2929  * 4-0: register offset
2930  */
2931 #define PHY_PAGE_SHIFT        5
2932 #define PHY_REG(page, reg)    \
2933         (((page) << PHY_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS))
2934
2935 #define IGP3_PHY_PORT_CTRL           \
2936         PHY_REG(769, 17)        /* Port General Configuration */
2937 #define IGP3_PHY_RATE_ADAPT_CTRL \
2938         PHY_REG(769, 25)        /* Rate Adapter Control Register */
2939
2940 #define IGP3_KMRN_FIFO_CTRL_STATS \
2941         PHY_REG(770, 16)        /* KMRN FIFO's control/status register */
2942 #define IGP3_KMRN_POWER_MNG_CTRL \
2943         PHY_REG(770, 17)        /* KMRN Power Management Control Register */
2944 #define IGP3_KMRN_INBAND_CTRL \
2945         PHY_REG(770, 18)        /* KMRN Inband Control Register */
2946 #define IGP3_KMRN_DIAG \
2947         PHY_REG(770, 19)        /* KMRN Diagnostic register */
2948 #define IGP3_KMRN_DIAG_PCS_LOCK_LOSS 0x0002     /* RX PCS is not synced */
2949 #define IGP3_KMRN_ACK_TIMEOUT \
2950         PHY_REG(770, 20)        /* KMRN Acknowledge Timeouts register */
2951
2952 #define IGP3_VR_CTRL \
2953         PHY_REG(776, 18)        /* Voltage regulator control register */
2954 #define IGP3_VR_CTRL_MODE_SHUT       0x0200     /* Enter powerdown, shutdown VRs */
2955 #define IGP3_VR_CTRL_MODE_MASK       0x0300     /* Shutdown VR Mask */
2956
2957 #define IGP3_CAPABILITY \
2958         PHY_REG(776, 19)        /* IGP3 Capability Register */
2959
2960 /* Capabilities for SKU Control  */
2961 #define IGP3_CAP_INITIATE_TEAM       0x0001     /* Able to initiate a team */
2962 #define IGP3_CAP_WFM                 0x0002     /* Support WoL and PXE */
2963 #define IGP3_CAP_ASF                 0x0004     /* Support ASF */
2964 #define IGP3_CAP_LPLU                0x0008     /* Support Low Power Link Up */
2965 #define IGP3_CAP_DC_AUTO_SPEED       0x0010     /* Support AC/DC Auto Link Speed */
2966 #define IGP3_CAP_SPD                 0x0020     /* Support Smart Power Down */
2967 #define IGP3_CAP_MULT_QUEUE          0x0040     /* Support 2 tx & 2 rx queues */
2968 #define IGP3_CAP_RSS                 0x0080     /* Support RSS */
2969 #define IGP3_CAP_8021PQ              0x0100     /* Support 802.1Q & 802.1p */
2970 #define IGP3_CAP_AMT_CB              0x0200     /* Support active manageability and circuit breaker */
2971
2972 #define IGP3_PPC_JORDAN_EN           0x0001
2973 #define IGP3_PPC_JORDAN_GIGA_SPEED   0x0002
2974
2975 #define IGP3_KMRN_PMC_EE_IDLE_LINK_DIS         0x0001
2976 #define IGP3_KMRN_PMC_K0S_ENTRY_LATENCY_MASK   0x001E
2977 #define IGP3_KMRN_PMC_K0S_MODE1_EN_GIGA        0x0020
2978 #define IGP3_KMRN_PMC_K0S_MODE1_EN_100         0x0040
2979
2980 #define IGP3E1000_PHY_MISC_CTRL                0x1B     /* Misc. Ctrl register */
2981 #define IGP3_PHY_MISC_DUPLEX_MANUAL_SET        0x1000   /* Duplex Manual Set */
2982
2983 #define IGP3_KMRN_EXT_CTRL  PHY_REG(770, 18)
2984 #define IGP3_KMRN_EC_DIS_INBAND    0x0080
2985
2986 #define IGP03E1000_E_PHY_ID  0x02A80390
2987 #define IFE_E_PHY_ID         0x02A80330 /* 10/100 PHY */
2988 #define IFE_PLUS_E_PHY_ID    0x02A80320
2989 #define IFE_C_E_PHY_ID       0x02A80310
2990
2991 #define IFE_PHY_EXTENDED_STATUS_CONTROL   0x10  /* 100BaseTx Extended Status, Control and Address */
2992 #define IFE_PHY_SPECIAL_CONTROL           0x11  /* 100BaseTx PHY special control register */
2993 #define IFE_PHY_RCV_FALSE_CARRIER         0x13  /* 100BaseTx Receive False Carrier Counter */
2994 #define IFE_PHY_RCV_DISCONNECT            0x14  /* 100BaseTx Receive Disconnect Counter */
2995 #define IFE_PHY_RCV_ERROT_FRAME           0x15  /* 100BaseTx Receive Error Frame Counter */
2996 #define IFE_PHY_RCV_SYMBOL_ERR            0x16  /* Receive Symbol Error Counter */
2997 #define IFE_PHY_PREM_EOF_ERR              0x17  /* 100BaseTx Receive Premature End Of Frame Error Counter */
2998 #define IFE_PHY_RCV_EOF_ERR               0x18  /* 10BaseT Receive End Of Frame Error Counter */
2999 #define IFE_PHY_TX_JABBER_DETECT          0x19  /* 10BaseT Transmit Jabber Detect Counter */
3000 #define IFE_PHY_EQUALIZER                 0x1A  /* PHY Equalizer Control and Status */
3001 #define IFE_PHY_SPECIAL_CONTROL_LED       0x1B  /* PHY special control and LED configuration */
3002 #define IFE_PHY_MDIX_CONTROL              0x1C  /* MDI/MDI-X Control register */
3003 #define IFE_PHY_HWI_CONTROL               0x1D  /* Hardware Integrity Control (HWI) */
3004
3005 #define IFE_PESC_REDUCED_POWER_DOWN_DISABLE  0x2000     /* Default 1 = Disable auto reduced power down */
3006 #define IFE_PESC_100BTX_POWER_DOWN           0x0400     /* Indicates the power state of 100BASE-TX */
3007 #define IFE_PESC_10BTX_POWER_DOWN            0x0200     /* Indicates the power state of 10BASE-T */
3008 #define IFE_PESC_POLARITY_REVERSED           0x0100     /* Indicates 10BASE-T polarity */
3009 #define IFE_PESC_PHY_ADDR_MASK               0x007C     /* Bit 6:2 for sampled PHY address */
3010 #define IFE_PESC_SPEED                       0x0002     /* Auto-negotiation speed result 1=100Mbs, 0=10Mbs */
3011 #define IFE_PESC_DUPLEX                      0x0001     /* Auto-negotiation duplex result 1=Full, 0=Half */
3012 #define IFE_PESC_POLARITY_REVERSED_SHIFT     8
3013
3014 #define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN   0x0100     /* 1 = Dynamic Power Down disabled */
3015 #define IFE_PSC_FORCE_POLARITY               0x0020     /* 1=Reversed Polarity, 0=Normal */
3016 #define IFE_PSC_AUTO_POLARITY_DISABLE        0x0010     /* 1=Auto Polarity Disabled, 0=Enabled */
3017 #define IFE_PSC_JABBER_FUNC_DISABLE          0x0001     /* 1=Jabber Disabled, 0=Normal Jabber Operation */
3018 #define IFE_PSC_FORCE_POLARITY_SHIFT         5
3019 #define IFE_PSC_AUTO_POLARITY_DISABLE_SHIFT  4
3020
3021 #define IFE_PMC_AUTO_MDIX                    0x0080     /* 1=enable MDI/MDI-X feature, default 0=disabled */
3022 #define IFE_PMC_FORCE_MDIX                   0x0040     /* 1=force MDIX-X, 0=force MDI */
3023 #define IFE_PMC_MDIX_STATUS                  0x0020     /* 1=MDI-X, 0=MDI */
3024 #define IFE_PMC_AUTO_MDIX_COMPLETE           0x0010     /* Resolution algorithm is completed */
3025 #define IFE_PMC_MDIX_MODE_SHIFT              6
3026 #define IFE_PHC_MDIX_RESET_ALL_MASK          0x0000     /* Disable auto MDI-X */
3027
3028 #define IFE_PHC_HWI_ENABLE                   0x8000     /* Enable the HWI feature */
3029 #define IFE_PHC_ABILITY_CHECK                0x4000     /* 1= Test Passed, 0=failed */
3030 #define IFE_PHC_TEST_EXEC                    0x2000     /* PHY launch test pulses on the wire */
3031 #define IFE_PHC_HIGHZ                        0x0200     /* 1 = Open Circuit */
3032 #define IFE_PHC_LOWZ                         0x0400     /* 1 = Short Circuit */
3033 #define IFE_PHC_LOW_HIGH_Z_MASK              0x0600     /* Mask for indication type of problem on the line */
3034 #define IFE_PHC_DISTANCE_MASK                0x01FF     /* Mask for distance to the cable problem, in 80cm granularity */
3035 #define IFE_PHC_RESET_ALL_MASK               0x0000     /* Disable HWI */
3036 #define IFE_PSCL_PROBE_MODE                  0x0020     /* LED Probe mode */
3037 #define IFE_PSCL_PROBE_LEDS_OFF              0x0006     /* Force LEDs 0 and 2 off */
3038 #define IFE_PSCL_PROBE_LEDS_ON               0x0007     /* Force LEDs 0 and 2 on */
3039
3040 #define ICH_FLASH_COMMAND_TIMEOUT            5000       /* 5000 uSecs - adjusted */
3041 #define ICH_FLASH_ERASE_TIMEOUT              3000000    /* Up to 3 seconds - worst case */
3042 #define ICH_FLASH_CYCLE_REPEAT_COUNT         10 /* 10 cycles */
3043 #define ICH_FLASH_SEG_SIZE_256               256
3044 #define ICH_FLASH_SEG_SIZE_4K                4096
3045 #define ICH_FLASH_SEG_SIZE_64K               65536
3046
3047 #define ICH_CYCLE_READ                       0x0
3048 #define ICH_CYCLE_RESERVED                   0x1
3049 #define ICH_CYCLE_WRITE                      0x2
3050 #define ICH_CYCLE_ERASE                      0x3
3051
3052 #define ICH_FLASH_GFPREG   0x0000
3053 #define ICH_FLASH_HSFSTS   0x0004
3054 #define ICH_FLASH_HSFCTL   0x0006
3055 #define ICH_FLASH_FADDR    0x0008
3056 #define ICH_FLASH_FDATA0   0x0010
3057 #define ICH_FLASH_FRACC    0x0050
3058 #define ICH_FLASH_FREG0    0x0054
3059 #define ICH_FLASH_FREG1    0x0058
3060 #define ICH_FLASH_FREG2    0x005C
3061 #define ICH_FLASH_FREG3    0x0060
3062 #define ICH_FLASH_FPR0     0x0074
3063 #define ICH_FLASH_FPR1     0x0078
3064 #define ICH_FLASH_SSFSTS   0x0090
3065 #define ICH_FLASH_SSFCTL   0x0092
3066 #define ICH_FLASH_PREOP    0x0094
3067 #define ICH_FLASH_OPTYPE   0x0096
3068 #define ICH_FLASH_OPMENU   0x0098
3069
3070 #define ICH_FLASH_REG_MAPSIZE      0x00A0
3071 #define ICH_FLASH_SECTOR_SIZE      4096
3072 #define ICH_GFPREG_BASE_MASK       0x1FFF
3073 #define ICH_FLASH_LINEAR_ADDR_MASK 0x00FFFFFF
3074
3075 /* Miscellaneous PHY bit definitions. */
3076 #define PHY_PREAMBLE        0xFFFFFFFF
3077 #define PHY_SOF             0x01
3078 #define PHY_OP_READ         0x02
3079 #define PHY_OP_WRITE        0x01
3080 #define PHY_TURNAROUND      0x02
3081 #define PHY_PREAMBLE_SIZE   32
3082 #define MII_CR_SPEED_1000   0x0040
3083 #define MII_CR_SPEED_100    0x2000
3084 #define MII_CR_SPEED_10     0x0000
3085 #define E1000_PHY_ADDRESS   0x01
3086 #define PHY_AUTO_NEG_TIME   45  /* 4.5 Seconds */
3087 #define PHY_FORCE_TIME      20  /* 2.0 Seconds */
3088 #define PHY_REVISION_MASK   0xFFFFFFF0
3089 #define DEVICE_SPEED_MASK   0x00000300  /* Device Ctrl Reg Speed Mask */
3090 #define REG4_SPEED_MASK     0x01E0
3091 #define REG9_SPEED_MASK     0x0300
3092 #define ADVERTISE_10_HALF   0x0001
3093 #define ADVERTISE_10_FULL   0x0002
3094 #define ADVERTISE_100_HALF  0x0004
3095 #define ADVERTISE_100_FULL  0x0008
3096 #define ADVERTISE_1000_HALF 0x0010
3097 #define ADVERTISE_1000_FULL 0x0020
3098 #define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F  /* Everything but 1000-Half */
3099 #define AUTONEG_ADVERTISE_10_100_ALL    0x000F  /* All 10/100 speeds */
3100 #define AUTONEG_ADVERTISE_10_ALL        0x0003  /* 10Mbps Full & Half speeds */
3101
3102 #endif /* _E1000_HW_H_ */