?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / drivers / net / ethernet / neterion / s2io.c
blob97f63e12d86e21799f9473eee76d6052952b5fbb
1 /************************************************************************
2 * s2io.c: A Linux PCI-X Ethernet driver for Neterion 10GbE Server NIC
3 * Copyright(c) 2002-2010 Exar Corp.
4 *
5 * This software may be used and distributed according to the terms of
6 * the GNU General Public License (GPL), incorporated herein by reference.
7 * Drivers based on or derived from this code fall under the GPL and must
8 * retain the authorship, copyright and license notice. This file is not
9 * a complete program and may only be used when the entire operating
10 * system is licensed under the GPL.
11 * See the file COPYING in this distribution for more information.
12 *
13 * Credits:
14 * Jeff Garzik : For pointing out the improper error condition
15 * check in the s2io_xmit routine and also some
16 * issues in the Tx watch dog function. Also for
17 * patiently answering all those innumerable
18 * questions regaring the 2.6 porting issues.
19 * Stephen Hemminger : Providing proper 2.6 porting mechanism for some
20 * macros available only in 2.6 Kernel.
21 * Francois Romieu : For pointing out all code part that were
22 * deprecated and also styling related comments.
23 * Grant Grundler : For helping me get rid of some Architecture
24 * dependent code.
25 * Christopher Hellwig : Some more 2.6 specific issues in the driver.
26 *
27 * The module loadable parameters that are supported by the driver and a brief
28 * explanation of all the variables.
29 *
30 * rx_ring_num : This can be used to program the number of receive rings used
31 * in the driver.
32 * rx_ring_sz: This defines the number of receive blocks each ring can have.
33 * This is also an array of size 8.
34 * rx_ring_mode: This defines the operation mode of all 8 rings. The valid
35 * values are 1, 2.
36 * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
37 * tx_fifo_len: This too is an array of 8. Each element defines the number of
38 * Tx descriptors that can be associated with each corresponding FIFO.
39 * intr_type: This defines the type of interrupt. The values can be 0(INTA),
40 * 2(MSI_X). Default value is '2(MSI_X)'
41 * lro_max_pkts: This parameter defines maximum number of packets can be
42 * aggregated as a single large packet
43 * napi: This parameter used to enable/disable NAPI (polling Rx)
44 * Possible values '1' for enable and '0' for disable. Default is '1'
45 * ufo: This parameter used to enable/disable UDP Fragmentation Offload(UFO)
46 * Possible values '1' for enable and '0' for disable. Default is '0'
47 * vlan_tag_strip: This can be used to enable or disable vlan stripping.
48 * Possible values '1' for enable , '0' for disable.
49 * Default is '2' - which means disable in promisc mode
50 * and enable in non-promiscuous mode.
51 * multiq: This parameter used to enable/disable MULTIQUEUE support.
52 * Possible values '1' for enable and '0' for disable. Default is '0'
53 ************************************************************************/
54
55 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
56
57 #include <linux/module.h>
58 #include <linux/types.h>
59 #include <linux/errno.h>
60 #include <linux/ioport.h>
61 #include <linux/pci.h>
62 #include <linux/dma-mapping.h>
63 #include <linux/kernel.h>
64 #include <linux/netdevice.h>
65 #include <linux/etherdevice.h>
66 #include <linux/mdio.h>
67 #include <linux/skbuff.h>
68 #include <linux/init.h>
69 #include <linux/delay.h>
70 #include <linux/stddef.h>
71 #include <linux/ioctl.h>
72 #include <linux/timex.h>
73 #include <linux/ethtool.h>
74 #include <linux/workqueue.h>
75 #include <linux/if_vlan.h>
76 #include <linux/ip.h>
77 #include <linux/tcp.h>
78 #include <linux/uaccess.h>
79 #include <linux/io.h>
80 #include <linux/slab.h>
81 #include <linux/prefetch.h>
82 #include <net/tcp.h>
83
84 #include <asm/system.h>
85 #include <asm/div64.h>
86 #include <asm/irq.h>
87
88 /* local include */
89 #include "s2io.h"
90 #include "s2io-regs.h"
91
92 #define DRV_VERSION "2.0.26.28"
93
94 /* S2io Driver name & version. */
95 static const char s2io_driver_name[] = "Neterion";
96 static const char s2io_driver_version[] = DRV_VERSION;
97
98 static const int rxd_size[2] = {32, 48};
99 static const int rxd_count[2] = {127, 85};
100
101 static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
102 {
103 int ret;
104
105 ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
106 (GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
107
108 return ret;
109 }
110
111 /*
112 * Cards with following subsystem_id have a link state indication
113 * problem, 600B, 600C, 600D, 640B, 640C and 640D.
114 * macro below identifies these cards given the subsystem_id.
115 */
116 #define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
117 (dev_type == XFRAME_I_DEVICE) ? \
118 ((((subid >= 0x600B) && (subid <= 0x600D)) || \
119 ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
120
121 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
122 ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
123
124 static inline int is_s2io_card_up(const struct s2io_nic *sp)
125 {
126 return test_bit(__S2IO_STATE_CARD_UP, &sp->state);
127 }
128
129 /* Ethtool related variables and Macros. */
130 static const char s2io_gstrings[][ETH_GSTRING_LEN] = {
131 "Register test\t(offline)",
132 "Eeprom test\t(offline)",
133 "Link test\t(online)",
134 "RLDRAM test\t(offline)",
135 "BIST Test\t(offline)"
136 };
137
138 static const char ethtool_xena_stats_keys[][ETH_GSTRING_LEN] = {
139 {"tmac_frms"},
140 {"tmac_data_octets"},
141 {"tmac_drop_frms"},
142 {"tmac_mcst_frms"},
143 {"tmac_bcst_frms"},
144 {"tmac_pause_ctrl_frms"},
145 {"tmac_ttl_octets"},
146 {"tmac_ucst_frms"},
147 {"tmac_nucst_frms"},
148 {"tmac_any_err_frms"},
149 {"tmac_ttl_less_fb_octets"},
150 {"tmac_vld_ip_octets"},
151 {"tmac_vld_ip"},
152 {"tmac_drop_ip"},
153 {"tmac_icmp"},
154 {"tmac_rst_tcp"},
155 {"tmac_tcp"},
156 {"tmac_udp"},
157 {"rmac_vld_frms"},
158 {"rmac_data_octets"},
159 {"rmac_fcs_err_frms"},
160 {"rmac_drop_frms"},
161 {"rmac_vld_mcst_frms"},
162 {"rmac_vld_bcst_frms"},
163 {"rmac_in_rng_len_err_frms"},
164 {"rmac_out_rng_len_err_frms"},
165 {"rmac_long_frms"},
166 {"rmac_pause_ctrl_frms"},
167 {"rmac_unsup_ctrl_frms"},
168 {"rmac_ttl_octets"},
169 {"rmac_accepted_ucst_frms"},
170 {"rmac_accepted_nucst_frms"},
171 {"rmac_discarded_frms"},
172 {"rmac_drop_events"},
173 {"rmac_ttl_less_fb_octets"},
174 {"rmac_ttl_frms"},
175 {"rmac_usized_frms"},
176 {"rmac_osized_frms"},
177 {"rmac_frag_frms"},
178 {"rmac_jabber_frms"},
179 {"rmac_ttl_64_frms"},
180 {"rmac_ttl_65_127_frms"},
181 {"rmac_ttl_128_255_frms"},
182 {"rmac_ttl_256_511_frms"},
183 {"rmac_ttl_512_1023_frms"},
184 {"rmac_ttl_1024_1518_frms"},
185 {"rmac_ip"},
186 {"rmac_ip_octets"},
187 {"rmac_hdr_err_ip"},
188 {"rmac_drop_ip"},
189 {"rmac_icmp"},
190 {"rmac_tcp"},
191 {"rmac_udp"},
192 {"rmac_err_drp_udp"},
193 {"rmac_xgmii_err_sym"},
194 {"rmac_frms_q0"},
195 {"rmac_frms_q1"},
196 {"rmac_frms_q2"},
197 {"rmac_frms_q3"},
198 {"rmac_frms_q4"},
199 {"rmac_frms_q5"},
200 {"rmac_frms_q6"},
201 {"rmac_frms_q7"},
202 {"rmac_full_q0"},
203 {"rmac_full_q1"},
204 {"rmac_full_q2"},
205 {"rmac_full_q3"},
206 {"rmac_full_q4"},
207 {"rmac_full_q5"},
208 {"rmac_full_q6"},
209 {"rmac_full_q7"},
210 {"rmac_pause_cnt"},
211 {"rmac_xgmii_data_err_cnt"},
212 {"rmac_xgmii_ctrl_err_cnt"},
213 {"rmac_accepted_ip"},
214 {"rmac_err_tcp"},
215 {"rd_req_cnt"},
216 {"new_rd_req_cnt"},
217 {"new_rd_req_rtry_cnt"},
218 {"rd_rtry_cnt"},
219 {"wr_rtry_rd_ack_cnt"},
220 {"wr_req_cnt"},
221 {"new_wr_req_cnt"},
222 {"new_wr_req_rtry_cnt"},
223 {"wr_rtry_cnt"},
224 {"wr_disc_cnt"},
225 {"rd_rtry_wr_ack_cnt"},
226 {"txp_wr_cnt"},
227 {"txd_rd_cnt"},
228 {"txd_wr_cnt"},
229 {"rxd_rd_cnt"},
230 {"rxd_wr_cnt"},
231 {"txf_rd_cnt"},
232 {"rxf_wr_cnt"}
233 };
234
235 static const char ethtool_enhanced_stats_keys[][ETH_GSTRING_LEN] = {
236 {"rmac_ttl_1519_4095_frms"},
237 {"rmac_ttl_4096_8191_frms"},
238 {"rmac_ttl_8192_max_frms"},
239 {"rmac_ttl_gt_max_frms"},
240 {"rmac_osized_alt_frms"},
241 {"rmac_jabber_alt_frms"},
242 {"rmac_gt_max_alt_frms"},
243 {"rmac_vlan_frms"},
244 {"rmac_len_discard"},
245 {"rmac_fcs_discard"},
246 {"rmac_pf_discard"},
247 {"rmac_da_discard"},
248 {"rmac_red_discard"},
249 {"rmac_rts_discard"},
250 {"rmac_ingm_full_discard"},
251 {"link_fault_cnt"}
252 };
253
254 static const char ethtool_driver_stats_keys[][ETH_GSTRING_LEN] = {
255 {"\n DRIVER STATISTICS"},
256 {"single_bit_ecc_errs"},
257 {"double_bit_ecc_errs"},
258 {"parity_err_cnt"},
259 {"serious_err_cnt"},
260 {"soft_reset_cnt"},
261 {"fifo_full_cnt"},
262 {"ring_0_full_cnt"},
263 {"ring_1_full_cnt"},
264 {"ring_2_full_cnt"},
265 {"ring_3_full_cnt"},
266 {"ring_4_full_cnt"},
267 {"ring_5_full_cnt"},
268 {"ring_6_full_cnt"},
269 {"ring_7_full_cnt"},
270 {"alarm_transceiver_temp_high"},
271 {"alarm_transceiver_temp_low"},
272 {"alarm_laser_bias_current_high"},
273 {"alarm_laser_bias_current_low"},
274 {"alarm_laser_output_power_high"},
275 {"alarm_laser_output_power_low"},
276 {"warn_transceiver_temp_high"},
277 {"warn_transceiver_temp_low"},
278 {"warn_laser_bias_current_high"},
279 {"warn_laser_bias_current_low"},
280 {"warn_laser_output_power_high"},
281 {"warn_laser_output_power_low"},
282 {"lro_aggregated_pkts"},
283 {"lro_flush_both_count"},
284 {"lro_out_of_sequence_pkts"},
285 {"lro_flush_due_to_max_pkts"},
286 {"lro_avg_aggr_pkts"},
287 {"mem_alloc_fail_cnt"},
288 {"pci_map_fail_cnt"},
289 {"watchdog_timer_cnt"},
290 {"mem_allocated"},
291 {"mem_freed"},
292 {"link_up_cnt"},
293 {"link_down_cnt"},
294 {"link_up_time"},
295 {"link_down_time"},
296 {"tx_tcode_buf_abort_cnt"},
297 {"tx_tcode_desc_abort_cnt"},
298 {"tx_tcode_parity_err_cnt"},
299 {"tx_tcode_link_loss_cnt"},
300 {"tx_tcode_list_proc_err_cnt"},
301 {"rx_tcode_parity_err_cnt"},
302 {"rx_tcode_abort_cnt"},
303 {"rx_tcode_parity_abort_cnt"},
304 {"rx_tcode_rda_fail_cnt"},
305 {"rx_tcode_unkn_prot_cnt"},
306 {"rx_tcode_fcs_err_cnt"},
307 {"rx_tcode_buf_size_err_cnt"},
308 {"rx_tcode_rxd_corrupt_cnt"},
309 {"rx_tcode_unkn_err_cnt"},
310 {"tda_err_cnt"},
311 {"pfc_err_cnt"},
312 {"pcc_err_cnt"},
313 {"tti_err_cnt"},
314 {"tpa_err_cnt"},
315 {"sm_err_cnt"},
316 {"lso_err_cnt"},
317 {"mac_tmac_err_cnt"},
318 {"mac_rmac_err_cnt"},
319 {"xgxs_txgxs_err_cnt"},
320 {"xgxs_rxgxs_err_cnt"},
321 {"rc_err_cnt"},
322 {"prc_pcix_err_cnt"},
323 {"rpa_err_cnt"},
324 {"rda_err_cnt"},
325 {"rti_err_cnt"},
326 {"mc_err_cnt"}
327 };
328
329 #define S2IO_XENA_STAT_LEN ARRAY_SIZE(ethtool_xena_stats_keys)
330 #define S2IO_ENHANCED_STAT_LEN ARRAY_SIZE(ethtool_enhanced_stats_keys)
331 #define S2IO_DRIVER_STAT_LEN ARRAY_SIZE(ethtool_driver_stats_keys)
332
333 #define XFRAME_I_STAT_LEN (S2IO_XENA_STAT_LEN + S2IO_DRIVER_STAT_LEN)
334 #define XFRAME_II_STAT_LEN (XFRAME_I_STAT_LEN + S2IO_ENHANCED_STAT_LEN)
335
336 #define XFRAME_I_STAT_STRINGS_LEN (XFRAME_I_STAT_LEN * ETH_GSTRING_LEN)
337 #define XFRAME_II_STAT_STRINGS_LEN (XFRAME_II_STAT_LEN * ETH_GSTRING_LEN)
338
339 #define S2IO_TEST_LEN ARRAY_SIZE(s2io_gstrings)
340 #define S2IO_STRINGS_LEN (S2IO_TEST_LEN * ETH_GSTRING_LEN)
341
342 #define S2IO_TIMER_CONF(timer, handle, arg, exp) \
343 init_timer(&timer); \
344 timer.function = handle; \
345 timer.data = (unsigned long)arg; \
346 mod_timer(&timer, (jiffies + exp)) \
347
348 /* copy mac addr to def_mac_addr array */
349 static void do_s2io_copy_mac_addr(struct s2io_nic *sp, int offset, u64 mac_addr)
350 {
351 sp->def_mac_addr[offset].mac_addr[5] = (u8) (mac_addr);
352 sp->def_mac_addr[offset].mac_addr[4] = (u8) (mac_addr >> 8);
353 sp->def_mac_addr[offset].mac_addr[3] = (u8) (mac_addr >> 16);
354 sp->def_mac_addr[offset].mac_addr[2] = (u8) (mac_addr >> 24);
355 sp->def_mac_addr[offset].mac_addr[1] = (u8) (mac_addr >> 32);
356 sp->def_mac_addr[offset].mac_addr[0] = (u8) (mac_addr >> 40);
357 }
358
359 /*
360 * Constants to be programmed into the Xena's registers, to configure
361 * the XAUI.
362 */
363
364 #define END_SIGN 0x0
365 static const u64 herc_act_dtx_cfg[] = {
366 /* Set address */
367 0x8000051536750000ULL, 0x80000515367500E0ULL,
368 /* Write data */
369 0x8000051536750004ULL, 0x80000515367500E4ULL,
370 /* Set address */
371 0x80010515003F0000ULL, 0x80010515003F00E0ULL,
372 /* Write data */
373 0x80010515003F0004ULL, 0x80010515003F00E4ULL,
374 /* Set address */
375 0x801205150D440000ULL, 0x801205150D4400E0ULL,
376 /* Write data */
377 0x801205150D440004ULL, 0x801205150D4400E4ULL,
378 /* Set address */
379 0x80020515F2100000ULL, 0x80020515F21000E0ULL,
380 /* Write data */
381 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
382 /* Done */
383 END_SIGN
384 };
385
386 static const u64 xena_dtx_cfg[] = {
387 /* Set address */
388 0x8000051500000000ULL, 0x80000515000000E0ULL,
389 /* Write data */
390 0x80000515D9350004ULL, 0x80000515D93500E4ULL,
391 /* Set address */
392 0x8001051500000000ULL, 0x80010515000000E0ULL,
393 /* Write data */
394 0x80010515001E0004ULL, 0x80010515001E00E4ULL,
395 /* Set address */
396 0x8002051500000000ULL, 0x80020515000000E0ULL,
397 /* Write data */
398 0x80020515F2100004ULL, 0x80020515F21000E4ULL,
399 END_SIGN
400 };
401
402 /*
403 * Constants for Fixing the MacAddress problem seen mostly on
404 * Alpha machines.
405 */
406 static const u64 fix_mac[] = {
407 0x0060000000000000ULL, 0x0060600000000000ULL,
408 0x0040600000000000ULL, 0x0000600000000000ULL,
409 0x0020600000000000ULL, 0x0060600000000000ULL,
410 0x0020600000000000ULL, 0x0060600000000000ULL,
411 0x0020600000000000ULL, 0x0060600000000000ULL,
412 0x0020600000000000ULL, 0x0060600000000000ULL,
413 0x0020600000000000ULL, 0x0060600000000000ULL,
414 0x0020600000000000ULL, 0x0060600000000000ULL,
415 0x0020600000000000ULL, 0x0060600000000000ULL,
416 0x0020600000000000ULL, 0x0060600000000000ULL,
417 0x0020600000000000ULL, 0x0060600000000000ULL,
418 0x0020600000000000ULL, 0x0060600000000000ULL,
419 0x0020600000000000ULL, 0x0000600000000000ULL,
420 0x0040600000000000ULL, 0x0060600000000000ULL,
421 END_SIGN
422 };
423
424 MODULE_LICENSE("GPL");
425 MODULE_VERSION(DRV_VERSION);
426
427
428 /* Module Loadable parameters. */
429 S2IO_PARM_INT(tx_fifo_num, FIFO_DEFAULT_NUM);
430 S2IO_PARM_INT(rx_ring_num, 1);
431 S2IO_PARM_INT(multiq, 0);
432 S2IO_PARM_INT(rx_ring_mode, 1);
433 S2IO_PARM_INT(use_continuous_tx_intrs, 1);
434 S2IO_PARM_INT(rmac_pause_time, 0x100);
435 S2IO_PARM_INT(mc_pause_threshold_q0q3, 187);
436 S2IO_PARM_INT(mc_pause_threshold_q4q7, 187);
437 S2IO_PARM_INT(shared_splits, 0);
438 S2IO_PARM_INT(tmac_util_period, 5);
439 S2IO_PARM_INT(rmac_util_period, 5);
440 S2IO_PARM_INT(l3l4hdr_size, 128);
441 /* 0 is no steering, 1 is Priority steering, 2 is Default steering */
442 S2IO_PARM_INT(tx_steering_type, TX_DEFAULT_STEERING);
443 /* Frequency of Rx desc syncs expressed as power of 2 */
444 S2IO_PARM_INT(rxsync_frequency, 3);
445 /* Interrupt type. Values can be 0(INTA), 2(MSI_X) */
446 S2IO_PARM_INT(intr_type, 2);
447 /* Large receive offload feature */
448
449 /* Max pkts to be aggregated by LRO at one time. If not specified,
450 * aggregation happens until we hit max IP pkt size(64K)
451 */
452 S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
453 S2IO_PARM_INT(indicate_max_pkts, 0);
454
455 S2IO_PARM_INT(napi, 1);
456 S2IO_PARM_INT(ufo, 0);
457 S2IO_PARM_INT(vlan_tag_strip, NO_STRIP_IN_PROMISC);
458
459 static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
460 {DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
461 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
462 {[0 ...(MAX_RX_RINGS - 1)] = SMALL_BLK_CNT};
463 static unsigned int rts_frm_len[MAX_RX_RINGS] =
464 {[0 ...(MAX_RX_RINGS - 1)] = 0 };
465
466 module_param_array(tx_fifo_len, uint, NULL, 0);
467 module_param_array(rx_ring_sz, uint, NULL, 0);
468 module_param_array(rts_frm_len, uint, NULL, 0);
469
470 /*
471 * S2IO device table.
472 * This table lists all the devices that this driver supports.
473 */
474 static DEFINE_PCI_DEVICE_TABLE(s2io_tbl) = {
475 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
476 PCI_ANY_ID, PCI_ANY_ID},
477 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
478 PCI_ANY_ID, PCI_ANY_ID},
479 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
480 PCI_ANY_ID, PCI_ANY_ID},
481 {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
482 PCI_ANY_ID, PCI_ANY_ID},
483 {0,}
484 };
485
486 MODULE_DEVICE_TABLE(pci, s2io_tbl);
487
488 static struct pci_error_handlers s2io_err_handler = {
489 .error_detected = s2io_io_error_detected,
490 .slot_reset = s2io_io_slot_reset,
491 .resume = s2io_io_resume,
492 };
493
494 static struct pci_driver s2io_driver = {
495 .name = "S2IO",
496 .id_table = s2io_tbl,
497 .probe = s2io_init_nic,
498 .remove = __devexit_p(s2io_rem_nic),
499 .err_handler = &s2io_err_handler,
500 };
501
502 /* A simplifier macro used both by init and free shared_mem Fns(). */
503 #define TXD_MEM_PAGE_CNT(len, per_each) ((len+per_each - 1) / per_each)
504
505 /* netqueue manipulation helper functions */
506 static inline void s2io_stop_all_tx_queue(struct s2io_nic *sp)
507 {
508 if (!sp->config.multiq) {
509 int i;
510
511 for (i = 0; i < sp->config.tx_fifo_num; i++)
512 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_STOP;
513 }
514 netif_tx_stop_all_queues(sp->dev);
515 }
516
517 static inline void s2io_stop_tx_queue(struct s2io_nic *sp, int fifo_no)
518 {
519 if (!sp->config.multiq)
520 sp->mac_control.fifos[fifo_no].queue_state =
521 FIFO_QUEUE_STOP;
522
523 netif_tx_stop_all_queues(sp->dev);
524 }
525
526 static inline void s2io_start_all_tx_queue(struct s2io_nic *sp)
527 {
528 if (!sp->config.multiq) {
529 int i;
530
531 for (i = 0; i < sp->config.tx_fifo_num; i++)
532 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
533 }
534 netif_tx_start_all_queues(sp->dev);
535 }
536
537 static inline void s2io_start_tx_queue(struct s2io_nic *sp, int fifo_no)
538 {
539 if (!sp->config.multiq)
540 sp->mac_control.fifos[fifo_no].queue_state =
541 FIFO_QUEUE_START;
542
543 netif_tx_start_all_queues(sp->dev);
544 }
545
546 static inline void s2io_wake_all_tx_queue(struct s2io_nic *sp)
547 {
548 if (!sp->config.multiq) {
549 int i;
550
551 for (i = 0; i < sp->config.tx_fifo_num; i++)
552 sp->mac_control.fifos[i].queue_state = FIFO_QUEUE_START;
553 }
554 netif_tx_wake_all_queues(sp->dev);
555 }
556
557 static inline void s2io_wake_tx_queue(
558 struct fifo_info *fifo, int cnt, u8 multiq)
559 {
560
561 if (multiq) {
562 if (cnt && __netif_subqueue_stopped(fifo->dev, fifo->fifo_no))
563 netif_wake_subqueue(fifo->dev, fifo->fifo_no);
564 } else if (cnt && (fifo->queue_state == FIFO_QUEUE_STOP)) {
565 if (netif_queue_stopped(fifo->dev)) {
566 fifo->queue_state = FIFO_QUEUE_START;
567 netif_wake_queue(fifo->dev);
568 }
569 }
570 }
571
572 /**
573 * init_shared_mem - Allocation and Initialization of Memory
574 * @nic: Device private variable.
575 * Description: The function allocates all the memory areas shared
576 * between the NIC and the driver. This includes Tx descriptors,
577 * Rx descriptors and the statistics block.
578 */
579
580 static int init_shared_mem(struct s2io_nic *nic)
581 {
582 u32 size;
583 void *tmp_v_addr, *tmp_v_addr_next;
584 dma_addr_t tmp_p_addr, tmp_p_addr_next;
585 struct RxD_block *pre_rxd_blk = NULL;
586 int i, j, blk_cnt;
587 int lst_size, lst_per_page;
588 struct net_device *dev = nic->dev;
589 unsigned long tmp;
590 struct buffAdd *ba;
591 struct config_param *config = &nic->config;
592 struct mac_info *mac_control = &nic->mac_control;
593 unsigned long long mem_allocated = 0;
594
595 /* Allocation and initialization of TXDLs in FIFOs */
596 size = 0;
597 for (i = 0; i < config->tx_fifo_num; i++) {
598 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
599
600 size += tx_cfg->fifo_len;
601 }
602 if (size > MAX_AVAILABLE_TXDS) {
603 DBG_PRINT(ERR_DBG,
604 "Too many TxDs requested: %d, max supported: %d\n",
605 size, MAX_AVAILABLE_TXDS);
606 return -EINVAL;
607 }
608
609 size = 0;
610 for (i = 0; i < config->tx_fifo_num; i++) {
611 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
612
613 size = tx_cfg->fifo_len;
614 /*
615 * Legal values are from 2 to 8192
616 */
617 if (size < 2) {
618 DBG_PRINT(ERR_DBG, "Fifo %d: Invalid length (%d) - "
619 "Valid lengths are 2 through 8192\n",
620 i, size);
621 return -EINVAL;
622 }
623 }
624
625 lst_size = (sizeof(struct TxD) * config->max_txds);
626 lst_per_page = PAGE_SIZE / lst_size;
627
628 for (i = 0; i < config->tx_fifo_num; i++) {
629 struct fifo_info *fifo = &mac_control->fifos[i];
630 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
631 int fifo_len = tx_cfg->fifo_len;
632 int list_holder_size = fifo_len * sizeof(struct list_info_hold);
633
634 fifo->list_info = kzalloc(list_holder_size, GFP_KERNEL);
635 if (!fifo->list_info) {
636 DBG_PRINT(INFO_DBG, "Malloc failed for list_info\n");
637 return -ENOMEM;
638 }
639 mem_allocated += list_holder_size;
640 }
641 for (i = 0; i < config->tx_fifo_num; i++) {
642 int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
643 lst_per_page);
644 struct fifo_info *fifo = &mac_control->fifos[i];
645 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
646
647 fifo->tx_curr_put_info.offset = 0;
648 fifo->tx_curr_put_info.fifo_len = tx_cfg->fifo_len - 1;
649 fifo->tx_curr_get_info.offset = 0;
650 fifo->tx_curr_get_info.fifo_len = tx_cfg->fifo_len - 1;
651 fifo->fifo_no = i;
652 fifo->nic = nic;
653 fifo->max_txds = MAX_SKB_FRAGS + 2;
654 fifo->dev = dev;
655
656 for (j = 0; j < page_num; j++) {
657 int k = 0;
658 dma_addr_t tmp_p;
659 void *tmp_v;
660 tmp_v = pci_alloc_consistent(nic->pdev,
661 PAGE_SIZE, &tmp_p);
662 if (!tmp_v) {
663 DBG_PRINT(INFO_DBG,
664 "pci_alloc_consistent failed for TxDL\n");
665 return -ENOMEM;
666 }
667 /* If we got a zero DMA address(can happen on
668 * certain platforms like PPC), reallocate.
669 * Store virtual address of page we don't want,
670 * to be freed later.
671 */
672 if (!tmp_p) {
673 mac_control->zerodma_virt_addr = tmp_v;
674 DBG_PRINT(INIT_DBG,
675 "%s: Zero DMA address for TxDL. "
676 "Virtual address %p\n",
677 dev->name, tmp_v);
678 tmp_v = pci_alloc_consistent(nic->pdev,
679 PAGE_SIZE, &tmp_p);
680 if (!tmp_v) {
681 DBG_PRINT(INFO_DBG,
682 "pci_alloc_consistent failed for TxDL\n");
683 return -ENOMEM;
684 }
685 mem_allocated += PAGE_SIZE;
686 }
687 while (k < lst_per_page) {
688 int l = (j * lst_per_page) + k;
689 if (l == tx_cfg->fifo_len)
690 break;
691 fifo->list_info[l].list_virt_addr =
692 tmp_v + (k * lst_size);
693 fifo->list_info[l].list_phy_addr =
694 tmp_p + (k * lst_size);
695 k++;
696 }
697 }
698 }
699
700 for (i = 0; i < config->tx_fifo_num; i++) {
701 struct fifo_info *fifo = &mac_control->fifos[i];
702 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
703
704 size = tx_cfg->fifo_len;
705 fifo->ufo_in_band_v = kcalloc(size, sizeof(u64), GFP_KERNEL);
706 if (!fifo->ufo_in_band_v)
707 return -ENOMEM;
708 mem_allocated += (size * sizeof(u64));
709 }
710
711 /* Allocation and initialization of RXDs in Rings */
712 size = 0;
713 for (i = 0; i < config->rx_ring_num; i++) {
714 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
715 struct ring_info *ring = &mac_control->rings[i];
716
717 if (rx_cfg->num_rxd % (rxd_count[nic->rxd_mode] + 1)) {
718 DBG_PRINT(ERR_DBG, "%s: Ring%d RxD count is not a "
719 "multiple of RxDs per Block\n",
720 dev->name, i);
721 return FAILURE;
722 }
723 size += rx_cfg->num_rxd;
724 ring->block_count = rx_cfg->num_rxd /
725 (rxd_count[nic->rxd_mode] + 1);
726 ring->pkt_cnt = rx_cfg->num_rxd - ring->block_count;
727 }
728 if (nic->rxd_mode == RXD_MODE_1)
729 size = (size * (sizeof(struct RxD1)));
730 else
731 size = (size * (sizeof(struct RxD3)));
732
733 for (i = 0; i < config->rx_ring_num; i++) {
734 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
735 struct ring_info *ring = &mac_control->rings[i];
736
737 ring->rx_curr_get_info.block_index = 0;
738 ring->rx_curr_get_info.offset = 0;
739 ring->rx_curr_get_info.ring_len = rx_cfg->num_rxd - 1;
740 ring->rx_curr_put_info.block_index = 0;
741 ring->rx_curr_put_info.offset = 0;
742 ring->rx_curr_put_info.ring_len = rx_cfg->num_rxd - 1;
743 ring->nic = nic;
744 ring->ring_no = i;
745
746 blk_cnt = rx_cfg->num_rxd / (rxd_count[nic->rxd_mode] + 1);
747 /* Allocating all the Rx blocks */
748 for (j = 0; j < blk_cnt; j++) {
749 struct rx_block_info *rx_blocks;
750 int l;
751
752 rx_blocks = &ring->rx_blocks[j];
753 size = SIZE_OF_BLOCK; /* size is always page size */
754 tmp_v_addr = pci_alloc_consistent(nic->pdev, size,
755 &tmp_p_addr);
756 if (tmp_v_addr == NULL) {
757 /*
758 * In case of failure, free_shared_mem()
759 * is called, which should free any
760 * memory that was alloced till the
761 * failure happened.
762 */
763 rx_blocks->block_virt_addr = tmp_v_addr;
764 return -ENOMEM;
765 }
766 mem_allocated += size;
767 memset(tmp_v_addr, 0, size);
768
769 size = sizeof(struct rxd_info) *
770 rxd_count[nic->rxd_mode];
771 rx_blocks->block_virt_addr = tmp_v_addr;
772 rx_blocks->block_dma_addr = tmp_p_addr;
773 rx_blocks->rxds = kmalloc(size, GFP_KERNEL);
774 if (!rx_blocks->rxds)
775 return -ENOMEM;
776 mem_allocated += size;
777 for (l = 0; l < rxd_count[nic->rxd_mode]; l++) {
778 rx_blocks->rxds[l].virt_addr =
779 rx_blocks->block_virt_addr +
780 (rxd_size[nic->rxd_mode] * l);
781 rx_blocks->rxds[l].dma_addr =
782 rx_blocks->block_dma_addr +
783 (rxd_size[nic->rxd_mode] * l);
784 }
785 }
786 /* Interlinking all Rx Blocks */
787 for (j = 0; j < blk_cnt; j++) {
788 int next = (j + 1) % blk_cnt;
789 tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
790 tmp_v_addr_next = ring->rx_blocks[next].block_virt_addr;
791 tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
792 tmp_p_addr_next = ring->rx_blocks[next].block_dma_addr;
793
794 pre_rxd_blk = tmp_v_addr;
795 pre_rxd_blk->reserved_2_pNext_RxD_block =
796 (unsigned long)tmp_v_addr_next;
797 pre_rxd_blk->pNext_RxD_Blk_physical =
798 (u64)tmp_p_addr_next;
799 }
800 }
801 if (nic->rxd_mode == RXD_MODE_3B) {
802 /*
803 * Allocation of Storages for buffer addresses in 2BUFF mode
804 * and the buffers as well.
805 */
806 for (i = 0; i < config->rx_ring_num; i++) {
807 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
808 struct ring_info *ring = &mac_control->rings[i];
809
810 blk_cnt = rx_cfg->num_rxd /
811 (rxd_count[nic->rxd_mode] + 1);
812 size = sizeof(struct buffAdd *) * blk_cnt;
813 ring->ba = kmalloc(size, GFP_KERNEL);
814 if (!ring->ba)
815 return -ENOMEM;
816 mem_allocated += size;
817 for (j = 0; j < blk_cnt; j++) {
818 int k = 0;
819
820 size = sizeof(struct buffAdd) *
821 (rxd_count[nic->rxd_mode] + 1);
822 ring->ba[j] = kmalloc(size, GFP_KERNEL);
823 if (!ring->ba[j])
824 return -ENOMEM;
825 mem_allocated += size;
826 while (k != rxd_count[nic->rxd_mode]) {
827 ba = &ring->ba[j][k];
828 size = BUF0_LEN + ALIGN_SIZE;
829 ba->ba_0_org = kmalloc(size, GFP_KERNEL);
830 if (!ba->ba_0_org)
831 return -ENOMEM;
832 mem_allocated += size;
833 tmp = (unsigned long)ba->ba_0_org;
834 tmp += ALIGN_SIZE;
835 tmp &= ~((unsigned long)ALIGN_SIZE);
836 ba->ba_0 = (void *)tmp;
837
838 size = BUF1_LEN + ALIGN_SIZE;
839 ba->ba_1_org = kmalloc(size, GFP_KERNEL);
840 if (!ba->ba_1_org)
841 return -ENOMEM;
842 mem_allocated += size;
843 tmp = (unsigned long)ba->ba_1_org;
844 tmp += ALIGN_SIZE;
845 tmp &= ~((unsigned long)ALIGN_SIZE);
846 ba->ba_1 = (void *)tmp;
847 k++;
848 }
849 }
850 }
851 }
852
853 /* Allocation and initialization of Statistics block */
854 size = sizeof(struct stat_block);
855 mac_control->stats_mem =
856 pci_alloc_consistent(nic->pdev, size,
857 &mac_control->stats_mem_phy);
858
859 if (!mac_control->stats_mem) {
860 /*
861 * In case of failure, free_shared_mem() is called, which
862 * should free any memory that was alloced till the
863 * failure happened.
864 */
865 return -ENOMEM;
866 }
867 mem_allocated += size;
868 mac_control->stats_mem_sz = size;
869
870 tmp_v_addr = mac_control->stats_mem;
871 mac_control->stats_info = tmp_v_addr;
872 memset(tmp_v_addr, 0, size);
873 DBG_PRINT(INIT_DBG, "%s: Ring Mem PHY: 0x%llx\n",
874 dev_name(&nic->pdev->dev), (unsigned long long)tmp_p_addr);
875 mac_control->stats_info->sw_stat.mem_allocated += mem_allocated;
876 return SUCCESS;
877 }
878
879 /**
880 * free_shared_mem - Free the allocated Memory
881 * @nic: Device private variable.
882 * Description: This function is to free all memory locations allocated by
883 * the init_shared_mem() function and return it to the kernel.
884 */
885
886 static void free_shared_mem(struct s2io_nic *nic)
887 {
888 int i, j, blk_cnt, size;
889 void *tmp_v_addr;
890 dma_addr_t tmp_p_addr;
891 int lst_size, lst_per_page;
892 struct net_device *dev;
893 int page_num = 0;
894 struct config_param *config;
895 struct mac_info *mac_control;
896 struct stat_block *stats;
897 struct swStat *swstats;
898
899 if (!nic)
900 return;
901
902 dev = nic->dev;
903
904 config = &nic->config;
905 mac_control = &nic->mac_control;
906 stats = mac_control->stats_info;
907 swstats = &stats->sw_stat;
908
909 lst_size = sizeof(struct TxD) * config->max_txds;
910 lst_per_page = PAGE_SIZE / lst_size;
911
912 for (i = 0; i < config->tx_fifo_num; i++) {
913 struct fifo_info *fifo = &mac_control->fifos[i];
914 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
915
916 page_num = TXD_MEM_PAGE_CNT(tx_cfg->fifo_len, lst_per_page);
917 for (j = 0; j < page_num; j++) {
918 int mem_blks = (j * lst_per_page);
919 struct list_info_hold *fli;
920
921 if (!fifo->list_info)
922 return;
923
924 fli = &fifo->list_info[mem_blks];
925 if (!fli->list_virt_addr)
926 break;
927 pci_free_consistent(nic->pdev, PAGE_SIZE,
928 fli->list_virt_addr,
929 fli->list_phy_addr);
930 swstats->mem_freed += PAGE_SIZE;
931 }
932 /* If we got a zero DMA address during allocation,
933 * free the page now
934 */
935 if (mac_control->zerodma_virt_addr) {
936 pci_free_consistent(nic->pdev, PAGE_SIZE,
937 mac_control->zerodma_virt_addr,
938 (dma_addr_t)0);
939 DBG_PRINT(INIT_DBG,
940 "%s: Freeing TxDL with zero DMA address. "
941 "Virtual address %p\n",
942 dev->name, mac_control->zerodma_virt_addr);
943 swstats->mem_freed += PAGE_SIZE;
944 }
945 kfree(fifo->list_info);
946 swstats->mem_freed += tx_cfg->fifo_len *
947 sizeof(struct list_info_hold);
948 }
949
950 size = SIZE_OF_BLOCK;
951 for (i = 0; i < config->rx_ring_num; i++) {
952 struct ring_info *ring = &mac_control->rings[i];
953
954 blk_cnt = ring->block_count;
955 for (j = 0; j < blk_cnt; j++) {
956 tmp_v_addr = ring->rx_blocks[j].block_virt_addr;
957 tmp_p_addr = ring->rx_blocks[j].block_dma_addr;
958 if (tmp_v_addr == NULL)
959 break;
960 pci_free_consistent(nic->pdev, size,
961 tmp_v_addr, tmp_p_addr);
962 swstats->mem_freed += size;
963 kfree(ring->rx_blocks[j].rxds);
964 swstats->mem_freed += sizeof(struct rxd_info) *
965 rxd_count[nic->rxd_mode];
966 }
967 }
968
969 if (nic->rxd_mode == RXD_MODE_3B) {
970 /* Freeing buffer storage addresses in 2BUFF mode. */
971 for (i = 0; i < config->rx_ring_num; i++) {
972 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
973 struct ring_info *ring = &mac_control->rings[i];
974
975 blk_cnt = rx_cfg->num_rxd /
976 (rxd_count[nic->rxd_mode] + 1);
977 for (j = 0; j < blk_cnt; j++) {
978 int k = 0;
979 if (!ring->ba[j])
980 continue;
981 while (k != rxd_count[nic->rxd_mode]) {
982 struct buffAdd *ba = &ring->ba[j][k];
983 kfree(ba->ba_0_org);
984 swstats->mem_freed +=
985 BUF0_LEN + ALIGN_SIZE;
986 kfree(ba->ba_1_org);
987 swstats->mem_freed +=
988 BUF1_LEN + ALIGN_SIZE;
989 k++;
990 }
991 kfree(ring->ba[j]);
992 swstats->mem_freed += sizeof(struct buffAdd) *
993 (rxd_count[nic->rxd_mode] + 1);
994 }
995 kfree(ring->ba);
996 swstats->mem_freed += sizeof(struct buffAdd *) *
997 blk_cnt;
998 }
999 }
1000
1001 for (i = 0; i < nic->config.tx_fifo_num; i++) {
1002 struct fifo_info *fifo = &mac_control->fifos[i];
1003 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
1004
1005 if (fifo->ufo_in_band_v) {
1006 swstats->mem_freed += tx_cfg->fifo_len *
1007 sizeof(u64);
1008 kfree(fifo->ufo_in_band_v);
1009 }
1010 }
1011
1012 if (mac_control->stats_mem) {
1013 swstats->mem_freed += mac_control->stats_mem_sz;
1014 pci_free_consistent(nic->pdev,
1015 mac_control->stats_mem_sz,
1016 mac_control->stats_mem,
1017 mac_control->stats_mem_phy);
1018 }
1019 }
1020
1021 /**
1022 * s2io_verify_pci_mode -
1023 */
1024
1025 static int s2io_verify_pci_mode(struct s2io_nic *nic)
1026 {
1027 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1028 register u64 val64 = 0;
1029 int mode;
1030
1031 val64 = readq(&bar0->pci_mode);
1032 mode = (u8)GET_PCI_MODE(val64);
1033
1034 if (val64 & PCI_MODE_UNKNOWN_MODE)
1035 return -1; /* Unknown PCI mode */
1036 return mode;
1037 }
1038
1039 #define NEC_VENID 0x1033
1040 #define NEC_DEVID 0x0125
1041 static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev)
1042 {
1043 struct pci_dev *tdev = NULL;
1044 while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) {
1045 if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) {
1046 if (tdev->bus == s2io_pdev->bus->parent) {
1047 pci_dev_put(tdev);
1048 return 1;
1049 }
1050 }
1051 }
1052 return 0;
1053 }
1054
1055 static int bus_speed[8] = {33, 133, 133, 200, 266, 133, 200, 266};
1056 /**
1057 * s2io_print_pci_mode -
1058 */
1059 static int s2io_print_pci_mode(struct s2io_nic *nic)
1060 {
1061 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1062 register u64 val64 = 0;
1063 int mode;
1064 struct config_param *config = &nic->config;
1065 const char *pcimode;
1066
1067 val64 = readq(&bar0->pci_mode);
1068 mode = (u8)GET_PCI_MODE(val64);
1069
1070 if (val64 & PCI_MODE_UNKNOWN_MODE)
1071 return -1; /* Unknown PCI mode */
1072
1073 config->bus_speed = bus_speed[mode];
1074
1075 if (s2io_on_nec_bridge(nic->pdev)) {
1076 DBG_PRINT(ERR_DBG, "%s: Device is on PCI-E bus\n",
1077 nic->dev->name);
1078 return mode;
1079 }
1080
1081 switch (mode) {
1082 case PCI_MODE_PCI_33:
1083 pcimode = "33MHz PCI bus";
1084 break;
1085 case PCI_MODE_PCI_66:
1086 pcimode = "66MHz PCI bus";
1087 break;
1088 case PCI_MODE_PCIX_M1_66:
1089 pcimode = "66MHz PCIX(M1) bus";
1090 break;
1091 case PCI_MODE_PCIX_M1_100:
1092 pcimode = "100MHz PCIX(M1) bus";
1093 break;
1094 case PCI_MODE_PCIX_M1_133:
1095 pcimode = "133MHz PCIX(M1) bus";
1096 break;
1097 case PCI_MODE_PCIX_M2_66:
1098 pcimode = "133MHz PCIX(M2) bus";
1099 break;
1100 case PCI_MODE_PCIX_M2_100:
1101 pcimode = "200MHz PCIX(M2) bus";
1102 break;
1103 case PCI_MODE_PCIX_M2_133:
1104 pcimode = "266MHz PCIX(M2) bus";
1105 break;
1106 default:
1107 pcimode = "unsupported bus!";
1108 mode = -1;
1109 }
1110
1111 DBG_PRINT(ERR_DBG, "%s: Device is on %d bit %s\n",
1112 nic->dev->name, val64 & PCI_MODE_32_BITS ? 32 : 64, pcimode);
1113
1114 return mode;
1115 }
1116
1117 /**
1118 * init_tti - Initialization transmit traffic interrupt scheme
1119 * @nic: device private variable
1120 * @link: link status (UP/DOWN) used to enable/disable continuous
1121 * transmit interrupts
1122 * Description: The function configures transmit traffic interrupts
1123 * Return Value: SUCCESS on success and
1124 * '-1' on failure
1125 */
1126
1127 static int init_tti(struct s2io_nic *nic, int link)
1128 {
1129 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1130 register u64 val64 = 0;
1131 int i;
1132 struct config_param *config = &nic->config;
1133
1134 for (i = 0; i < config->tx_fifo_num; i++) {
1135 /*
1136 * TTI Initialization. Default Tx timer gets us about
1137 * 250 interrupts per sec. Continuous interrupts are enabled
1138 * by default.
1139 */
1140 if (nic->device_type == XFRAME_II_DEVICE) {
1141 int count = (nic->config.bus_speed * 125)/2;
1142 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
1143 } else
1144 val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
1145
1146 val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
1147 TTI_DATA1_MEM_TX_URNG_B(0x10) |
1148 TTI_DATA1_MEM_TX_URNG_C(0x30) |
1149 TTI_DATA1_MEM_TX_TIMER_AC_EN;
1150 if (i == 0)
1151 if (use_continuous_tx_intrs && (link == LINK_UP))
1152 val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
1153 writeq(val64, &bar0->tti_data1_mem);
1154
1155 if (nic->config.intr_type == MSI_X) {
1156 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1157 TTI_DATA2_MEM_TX_UFC_B(0x100) |
1158 TTI_DATA2_MEM_TX_UFC_C(0x200) |
1159 TTI_DATA2_MEM_TX_UFC_D(0x300);
1160 } else {
1161 if ((nic->config.tx_steering_type ==
1162 TX_DEFAULT_STEERING) &&
1163 (config->tx_fifo_num > 1) &&
1164 (i >= nic->udp_fifo_idx) &&
1165 (i < (nic->udp_fifo_idx +
1166 nic->total_udp_fifos)))
1167 val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) |
1168 TTI_DATA2_MEM_TX_UFC_B(0x80) |
1169 TTI_DATA2_MEM_TX_UFC_C(0x100) |
1170 TTI_DATA2_MEM_TX_UFC_D(0x120);
1171 else
1172 val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
1173 TTI_DATA2_MEM_TX_UFC_B(0x20) |
1174 TTI_DATA2_MEM_TX_UFC_C(0x40) |
1175 TTI_DATA2_MEM_TX_UFC_D(0x80);
1176 }
1177
1178 writeq(val64, &bar0->tti_data2_mem);
1179
1180 val64 = TTI_CMD_MEM_WE |
1181 TTI_CMD_MEM_STROBE_NEW_CMD |
1182 TTI_CMD_MEM_OFFSET(i);
1183 writeq(val64, &bar0->tti_command_mem);
1184
1185 if (wait_for_cmd_complete(&bar0->tti_command_mem,
1186 TTI_CMD_MEM_STROBE_NEW_CMD,
1187 S2IO_BIT_RESET) != SUCCESS)
1188 return FAILURE;
1189 }
1190
1191 return SUCCESS;
1192 }
1193
1194 /**
1195 * init_nic - Initialization of hardware
1196 * @nic: device private variable
1197 * Description: The function sequentially configures every block
1198 * of the H/W from their reset values.
1199 * Return Value: SUCCESS on success and
1200 * '-1' on failure (endian settings incorrect).
1201 */
1202
1203 static int init_nic(struct s2io_nic *nic)
1204 {
1205 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1206 struct net_device *dev = nic->dev;
1207 register u64 val64 = 0;
1208 void __iomem *add;
1209 u32 time;
1210 int i, j;
1211 int dtx_cnt = 0;
1212 unsigned long long mem_share;
1213 int mem_size;
1214 struct config_param *config = &nic->config;
1215 struct mac_info *mac_control = &nic->mac_control;
1216
1217 /* to set the swapper controle on the card */
1218 if (s2io_set_swapper(nic)) {
1219 DBG_PRINT(ERR_DBG, "ERROR: Setting Swapper failed\n");
1220 return -EIO;
1221 }
1222
1223 /*
1224 * Herc requires EOI to be removed from reset before XGXS, so..
1225 */
1226 if (nic->device_type & XFRAME_II_DEVICE) {
1227 val64 = 0xA500000000ULL;
1228 writeq(val64, &bar0->sw_reset);
1229 msleep(500);
1230 val64 = readq(&bar0->sw_reset);
1231 }
1232
1233 /* Remove XGXS from reset state */
1234 val64 = 0;
1235 writeq(val64, &bar0->sw_reset);
1236 msleep(500);
1237 val64 = readq(&bar0->sw_reset);
1238
1239 /* Ensure that it's safe to access registers by checking
1240 * RIC_RUNNING bit is reset. Check is valid only for XframeII.
1241 */
1242 if (nic->device_type == XFRAME_II_DEVICE) {
1243 for (i = 0; i < 50; i++) {
1244 val64 = readq(&bar0->adapter_status);
1245 if (!(val64 & ADAPTER_STATUS_RIC_RUNNING))
1246 break;
1247 msleep(10);
1248 }
1249 if (i == 50)
1250 return -ENODEV;
1251 }
1252
1253 /* Enable Receiving broadcasts */
1254 add = &bar0->mac_cfg;
1255 val64 = readq(&bar0->mac_cfg);
1256 val64 |= MAC_RMAC_BCAST_ENABLE;
1257 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1258 writel((u32)val64, add);
1259 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1260 writel((u32) (val64 >> 32), (add + 4));
1261
1262 /* Read registers in all blocks */
1263 val64 = readq(&bar0->mac_int_mask);
1264 val64 = readq(&bar0->mc_int_mask);
1265 val64 = readq(&bar0->xgxs_int_mask);
1266
1267 /* Set MTU */
1268 val64 = dev->mtu;
1269 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
1270
1271 if (nic->device_type & XFRAME_II_DEVICE) {
1272 while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
1273 SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
1274 &bar0->dtx_control, UF);
1275 if (dtx_cnt & 0x1)
1276 msleep(1); /* Necessary!! */
1277 dtx_cnt++;
1278 }
1279 } else {
1280 while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
1281 SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
1282 &bar0->dtx_control, UF);
1283 val64 = readq(&bar0->dtx_control);
1284 dtx_cnt++;
1285 }
1286 }
1287
1288 /* Tx DMA Initialization */
1289 val64 = 0;
1290 writeq(val64, &bar0->tx_fifo_partition_0);
1291 writeq(val64, &bar0->tx_fifo_partition_1);
1292 writeq(val64, &bar0->tx_fifo_partition_2);
1293 writeq(val64, &bar0->tx_fifo_partition_3);
1294
1295 for (i = 0, j = 0; i < config->tx_fifo_num; i++) {
1296 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
1297
1298 val64 |= vBIT(tx_cfg->fifo_len - 1, ((j * 32) + 19), 13) |
1299 vBIT(tx_cfg->fifo_priority, ((j * 32) + 5), 3);
1300
1301 if (i == (config->tx_fifo_num - 1)) {
1302 if (i % 2 == 0)
1303 i++;
1304 }
1305
1306 switch (i) {
1307 case 1:
1308 writeq(val64, &bar0->tx_fifo_partition_0);
1309 val64 = 0;
1310 j = 0;
1311 break;
1312 case 3:
1313 writeq(val64, &bar0->tx_fifo_partition_1);
1314 val64 = 0;
1315 j = 0;
1316 break;
1317 case 5:
1318 writeq(val64, &bar0->tx_fifo_partition_2);
1319 val64 = 0;
1320 j = 0;
1321 break;
1322 case 7:
1323 writeq(val64, &bar0->tx_fifo_partition_3);
1324 val64 = 0;
1325 j = 0;
1326 break;
1327 default:
1328 j++;
1329 break;
1330 }
1331 }
1332
1333 /*
1334 * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
1335 * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
1336 */
1337 if ((nic->device_type == XFRAME_I_DEVICE) && (nic->pdev->revision < 4))
1338 writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
1339
1340 val64 = readq(&bar0->tx_fifo_partition_0);
1341 DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
1342 &bar0->tx_fifo_partition_0, (unsigned long long)val64);
1343
1344 /*
1345 * Initialization of Tx_PA_CONFIG register to ignore packet
1346 * integrity checking.
1347 */
1348 val64 = readq(&bar0->tx_pa_cfg);
1349 val64 |= TX_PA_CFG_IGNORE_FRM_ERR |
1350 TX_PA_CFG_IGNORE_SNAP_OUI |
1351 TX_PA_CFG_IGNORE_LLC_CTRL |
1352 TX_PA_CFG_IGNORE_L2_ERR;
1353 writeq(val64, &bar0->tx_pa_cfg);
1354
1355 /* Rx DMA intialization. */
1356 val64 = 0;
1357 for (i = 0; i < config->rx_ring_num; i++) {
1358 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
1359
1360 val64 |= vBIT(rx_cfg->ring_priority, (5 + (i * 8)), 3);
1361 }
1362 writeq(val64, &bar0->rx_queue_priority);
1363
1364 /*
1365 * Allocating equal share of memory to all the
1366 * configured Rings.
1367 */
1368 val64 = 0;
1369 if (nic->device_type & XFRAME_II_DEVICE)
1370 mem_size = 32;
1371 else
1372 mem_size = 64;
1373
1374 for (i = 0; i < config->rx_ring_num; i++) {
1375 switch (i) {
1376 case 0:
1377 mem_share = (mem_size / config->rx_ring_num +
1378 mem_size % config->rx_ring_num);
1379 val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
1380 continue;
1381 case 1:
1382 mem_share = (mem_size / config->rx_ring_num);
1383 val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
1384 continue;
1385 case 2:
1386 mem_share = (mem_size / config->rx_ring_num);
1387 val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
1388 continue;
1389 case 3:
1390 mem_share = (mem_size / config->rx_ring_num);
1391 val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
1392 continue;
1393 case 4:
1394 mem_share = (mem_size / config->rx_ring_num);
1395 val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
1396 continue;
1397 case 5:
1398 mem_share = (mem_size / config->rx_ring_num);
1399 val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
1400 continue;
1401 case 6:
1402 mem_share = (mem_size / config->rx_ring_num);
1403 val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
1404 continue;
1405 case 7:
1406 mem_share = (mem_size / config->rx_ring_num);
1407 val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
1408 continue;
1409 }
1410 }
1411 writeq(val64, &bar0->rx_queue_cfg);
1412
1413 /*
1414 * Filling Tx round robin registers
1415 * as per the number of FIFOs for equal scheduling priority
1416 */
1417 switch (config->tx_fifo_num) {
1418 case 1:
1419 val64 = 0x0;
1420 writeq(val64, &bar0->tx_w_round_robin_0);
1421 writeq(val64, &bar0->tx_w_round_robin_1);
1422 writeq(val64, &bar0->tx_w_round_robin_2);
1423 writeq(val64, &bar0->tx_w_round_robin_3);
1424 writeq(val64, &bar0->tx_w_round_robin_4);
1425 break;
1426 case 2:
1427 val64 = 0x0001000100010001ULL;
1428 writeq(val64, &bar0->tx_w_round_robin_0);
1429 writeq(val64, &bar0->tx_w_round_robin_1);
1430 writeq(val64, &bar0->tx_w_round_robin_2);
1431 writeq(val64, &bar0->tx_w_round_robin_3);
1432 val64 = 0x0001000100000000ULL;
1433 writeq(val64, &bar0->tx_w_round_robin_4);
1434 break;
1435 case 3:
1436 val64 = 0x0001020001020001ULL;
1437 writeq(val64, &bar0->tx_w_round_robin_0);
1438 val64 = 0x0200010200010200ULL;
1439 writeq(val64, &bar0->tx_w_round_robin_1);
1440 val64 = 0x0102000102000102ULL;
1441 writeq(val64, &bar0->tx_w_round_robin_2);
1442 val64 = 0x0001020001020001ULL;
1443 writeq(val64, &bar0->tx_w_round_robin_3);
1444 val64 = 0x0200010200000000ULL;
1445 writeq(val64, &bar0->tx_w_round_robin_4);
1446 break;
1447 case 4:
1448 val64 = 0x0001020300010203ULL;
1449 writeq(val64, &bar0->tx_w_round_robin_0);
1450 writeq(val64, &bar0->tx_w_round_robin_1);
1451 writeq(val64, &bar0->tx_w_round_robin_2);
1452 writeq(val64, &bar0->tx_w_round_robin_3);
1453 val64 = 0x0001020300000000ULL;
1454 writeq(val64, &bar0->tx_w_round_robin_4);
1455 break;
1456 case 5:
1457 val64 = 0x0001020304000102ULL;
1458 writeq(val64, &bar0->tx_w_round_robin_0);
1459 val64 = 0x0304000102030400ULL;
1460 writeq(val64, &bar0->tx_w_round_robin_1);
1461 val64 = 0x0102030400010203ULL;
1462 writeq(val64, &bar0->tx_w_round_robin_2);
1463 val64 = 0x0400010203040001ULL;
1464 writeq(val64, &bar0->tx_w_round_robin_3);
1465 val64 = 0x0203040000000000ULL;
1466 writeq(val64, &bar0->tx_w_round_robin_4);
1467 break;
1468 case 6:
1469 val64 = 0x0001020304050001ULL;
1470 writeq(val64, &bar0->tx_w_round_robin_0);
1471 val64 = 0x0203040500010203ULL;
1472 writeq(val64, &bar0->tx_w_round_robin_1);
1473 val64 = 0x0405000102030405ULL;
1474 writeq(val64, &bar0->tx_w_round_robin_2);
1475 val64 = 0x0001020304050001ULL;
1476 writeq(val64, &bar0->tx_w_round_robin_3);
1477 val64 = 0x0203040500000000ULL;
1478 writeq(val64, &bar0->tx_w_round_robin_4);
1479 break;
1480 case 7:
1481 val64 = 0x0001020304050600ULL;
1482 writeq(val64, &bar0->tx_w_round_robin_0);
1483 val64 = 0x0102030405060001ULL;
1484 writeq(val64, &bar0->tx_w_round_robin_1);
1485 val64 = 0x0203040506000102ULL;
1486 writeq(val64, &bar0->tx_w_round_robin_2);
1487 val64 = 0x0304050600010203ULL;
1488 writeq(val64, &bar0->tx_w_round_robin_3);
1489 val64 = 0x0405060000000000ULL;
1490 writeq(val64, &bar0->tx_w_round_robin_4);
1491 break;
1492 case 8:
1493 val64 = 0x0001020304050607ULL;
1494 writeq(val64, &bar0->tx_w_round_robin_0);
1495 writeq(val64, &bar0->tx_w_round_robin_1);
1496 writeq(val64, &bar0->tx_w_round_robin_2);
1497 writeq(val64, &bar0->tx_w_round_robin_3);
1498 val64 = 0x0001020300000000ULL;
1499 writeq(val64, &bar0->tx_w_round_robin_4);
1500 break;
1501 }
1502
1503 /* Enable all configured Tx FIFO partitions */
1504 val64 = readq(&bar0->tx_fifo_partition_0);
1505 val64 |= (TX_FIFO_PARTITION_EN);
1506 writeq(val64, &bar0->tx_fifo_partition_0);
1507
1508 /* Filling the Rx round robin registers as per the
1509 * number of Rings and steering based on QoS with
1510 * equal priority.
1511 */
1512 switch (config->rx_ring_num) {
1513 case 1:
1514 val64 = 0x0;
1515 writeq(val64, &bar0->rx_w_round_robin_0);
1516 writeq(val64, &bar0->rx_w_round_robin_1);
1517 writeq(val64, &bar0->rx_w_round_robin_2);
1518 writeq(val64, &bar0->rx_w_round_robin_3);
1519 writeq(val64, &bar0->rx_w_round_robin_4);
1520
1521 val64 = 0x8080808080808080ULL;
1522 writeq(val64, &bar0->rts_qos_steering);
1523 break;
1524 case 2:
1525 val64 = 0x0001000100010001ULL;
1526 writeq(val64, &bar0->rx_w_round_robin_0);
1527 writeq(val64, &bar0->rx_w_round_robin_1);
1528 writeq(val64, &bar0->rx_w_round_robin_2);
1529 writeq(val64, &bar0->rx_w_round_robin_3);
1530 val64 = 0x0001000100000000ULL;
1531 writeq(val64, &bar0->rx_w_round_robin_4);
1532
1533 val64 = 0x8080808040404040ULL;
1534 writeq(val64, &bar0->rts_qos_steering);
1535 break;
1536 case 3:
1537 val64 = 0x0001020001020001ULL;
1538 writeq(val64, &bar0->rx_w_round_robin_0);
1539 val64 = 0x0200010200010200ULL;
1540 writeq(val64, &bar0->rx_w_round_robin_1);
1541 val64 = 0x0102000102000102ULL;
1542 writeq(val64, &bar0->rx_w_round_robin_2);
1543 val64 = 0x0001020001020001ULL;
1544 writeq(val64, &bar0->rx_w_round_robin_3);
1545 val64 = 0x0200010200000000ULL;
1546 writeq(val64, &bar0->rx_w_round_robin_4);
1547
1548 val64 = 0x8080804040402020ULL;
1549 writeq(val64, &bar0->rts_qos_steering);
1550 break;
1551 case 4:
1552 val64 = 0x0001020300010203ULL;
1553 writeq(val64, &bar0->rx_w_round_robin_0);
1554 writeq(val64, &bar0->rx_w_round_robin_1);
1555 writeq(val64, &bar0->rx_w_round_robin_2);
1556 writeq(val64, &bar0->rx_w_round_robin_3);
1557 val64 = 0x0001020300000000ULL;
1558 writeq(val64, &bar0->rx_w_round_robin_4);
1559
1560 val64 = 0x8080404020201010ULL;
1561 writeq(val64, &bar0->rts_qos_steering);
1562 break;
1563 case 5:
1564 val64 = 0x0001020304000102ULL;
1565 writeq(val64, &bar0->rx_w_round_robin_0);
1566 val64 = 0x0304000102030400ULL;
1567 writeq(val64, &bar0->rx_w_round_robin_1);
1568 val64 = 0x0102030400010203ULL;
1569 writeq(val64, &bar0->rx_w_round_robin_2);
1570 val64 = 0x0400010203040001ULL;
1571 writeq(val64, &bar0->rx_w_round_robin_3);
1572 val64 = 0x0203040000000000ULL;
1573 writeq(val64, &bar0->rx_w_round_robin_4);
1574
1575 val64 = 0x8080404020201008ULL;
1576 writeq(val64, &bar0->rts_qos_steering);
1577 break;
1578 case 6:
1579 val64 = 0x0001020304050001ULL;
1580 writeq(val64, &bar0->rx_w_round_robin_0);
1581 val64 = 0x0203040500010203ULL;
1582 writeq(val64, &bar0->rx_w_round_robin_1);
1583 val64 = 0x0405000102030405ULL;
1584 writeq(val64, &bar0->rx_w_round_robin_2);
1585 val64 = 0x0001020304050001ULL;
1586 writeq(val64, &bar0->rx_w_round_robin_3);
1587 val64 = 0x0203040500000000ULL;
1588 writeq(val64, &bar0->rx_w_round_robin_4);
1589
1590 val64 = 0x8080404020100804ULL;
1591 writeq(val64, &bar0->rts_qos_steering);
1592 break;
1593 case 7:
1594 val64 = 0x0001020304050600ULL;
1595 writeq(val64, &bar0->rx_w_round_robin_0);
1596 val64 = 0x0102030405060001ULL;
1597 writeq(val64, &bar0->rx_w_round_robin_1);
1598 val64 = 0x0203040506000102ULL;
1599 writeq(val64, &bar0->rx_w_round_robin_2);
1600 val64 = 0x0304050600010203ULL;
1601 writeq(val64, &bar0->rx_w_round_robin_3);
1602 val64 = 0x0405060000000000ULL;
1603 writeq(val64, &bar0->rx_w_round_robin_4);
1604
1605 val64 = 0x8080402010080402ULL;
1606 writeq(val64, &bar0->rts_qos_steering);
1607 break;
1608 case 8:
1609 val64 = 0x0001020304050607ULL;
1610 writeq(val64, &bar0->rx_w_round_robin_0);
1611 writeq(val64, &bar0->rx_w_round_robin_1);
1612 writeq(val64, &bar0->rx_w_round_robin_2);
1613 writeq(val64, &bar0->rx_w_round_robin_3);
1614 val64 = 0x0001020300000000ULL;
1615 writeq(val64, &bar0->rx_w_round_robin_4);
1616
1617 val64 = 0x8040201008040201ULL;
1618 writeq(val64, &bar0->rts_qos_steering);
1619 break;
1620 }
1621
1622 /* UDP Fix */
1623 val64 = 0;
1624 for (i = 0; i < 8; i++)
1625 writeq(val64, &bar0->rts_frm_len_n[i]);
1626
1627 /* Set the default rts frame length for the rings configured */
1628 val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
1629 for (i = 0 ; i < config->rx_ring_num ; i++)
1630 writeq(val64, &bar0->rts_frm_len_n[i]);
1631
1632 /* Set the frame length for the configured rings
1633 * desired by the user
1634 */
1635 for (i = 0; i < config->rx_ring_num; i++) {
1636 /* If rts_frm_len[i] == 0 then it is assumed that user not
1637 * specified frame length steering.
1638 * If the user provides the frame length then program
1639 * the rts_frm_len register for those values or else
1640 * leave it as it is.
1641 */
1642 if (rts_frm_len[i] != 0) {
1643 writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
1644 &bar0->rts_frm_len_n[i]);
1645 }
1646 }
1647
1648 /* Disable differentiated services steering logic */
1649 for (i = 0; i < 64; i++) {
1650 if (rts_ds_steer(nic, i, 0) == FAILURE) {
1651 DBG_PRINT(ERR_DBG,
1652 "%s: rts_ds_steer failed on codepoint %d\n",
1653 dev->name, i);
1654 return -ENODEV;
1655 }
1656 }
1657
1658 /* Program statistics memory */
1659 writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
1660
1661 if (nic->device_type == XFRAME_II_DEVICE) {
1662 val64 = STAT_BC(0x320);
1663 writeq(val64, &bar0->stat_byte_cnt);
1664 }
1665
1666 /*
1667 * Initializing the sampling rate for the device to calculate the
1668 * bandwidth utilization.
1669 */
1670 val64 = MAC_TX_LINK_UTIL_VAL(tmac_util_period) |
1671 MAC_RX_LINK_UTIL_VAL(rmac_util_period);
1672 writeq(val64, &bar0->mac_link_util);
1673
1674 /*
1675 * Initializing the Transmit and Receive Traffic Interrupt
1676 * Scheme.
1677 */
1678
1679 /* Initialize TTI */
1680 if (SUCCESS != init_tti(nic, nic->last_link_state))
1681 return -ENODEV;
1682
1683 /* RTI Initialization */
1684 if (nic->device_type == XFRAME_II_DEVICE) {
1685 /*
1686 * Programmed to generate Apprx 500 Intrs per
1687 * second
1688 */
1689 int count = (nic->config.bus_speed * 125)/4;
1690 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
1691 } else
1692 val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
1693 val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
1694 RTI_DATA1_MEM_RX_URNG_B(0x10) |
1695 RTI_DATA1_MEM_RX_URNG_C(0x30) |
1696 RTI_DATA1_MEM_RX_TIMER_AC_EN;
1697
1698 writeq(val64, &bar0->rti_data1_mem);
1699
1700 val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
1701 RTI_DATA2_MEM_RX_UFC_B(0x2) ;
1702 if (nic->config.intr_type == MSI_X)
1703 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x20) |
1704 RTI_DATA2_MEM_RX_UFC_D(0x40));
1705 else
1706 val64 |= (RTI_DATA2_MEM_RX_UFC_C(0x40) |
1707 RTI_DATA2_MEM_RX_UFC_D(0x80));
1708 writeq(val64, &bar0->rti_data2_mem);
1709
1710 for (i = 0; i < config->rx_ring_num; i++) {
1711 val64 = RTI_CMD_MEM_WE |
1712 RTI_CMD_MEM_STROBE_NEW_CMD |
1713 RTI_CMD_MEM_OFFSET(i);
1714 writeq(val64, &bar0->rti_command_mem);
1715
1716 /*
1717 * Once the operation completes, the Strobe bit of the
1718 * command register will be reset. We poll for this
1719 * particular condition. We wait for a maximum of 500ms
1720 * for the operation to complete, if it's not complete
1721 * by then we return error.
1722 */
1723 time = 0;
1724 while (true) {
1725 val64 = readq(&bar0->rti_command_mem);
1726 if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD))
1727 break;
1728
1729 if (time > 10) {
1730 DBG_PRINT(ERR_DBG, "%s: RTI init failed\n",
1731 dev->name);
1732 return -ENODEV;
1733 }
1734 time++;
1735 msleep(50);
1736 }
1737 }
1738
1739 /*
1740 * Initializing proper values as Pause threshold into all
1741 * the 8 Queues on Rx side.
1742 */
1743 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
1744 writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
1745
1746 /* Disable RMAC PAD STRIPPING */
1747 add = &bar0->mac_cfg;
1748 val64 = readq(&bar0->mac_cfg);
1749 val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
1750 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1751 writel((u32) (val64), add);
1752 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1753 writel((u32) (val64 >> 32), (add + 4));
1754 val64 = readq(&bar0->mac_cfg);
1755
1756 /* Enable FCS stripping by adapter */
1757 add = &bar0->mac_cfg;
1758 val64 = readq(&bar0->mac_cfg);
1759 val64 |= MAC_CFG_RMAC_STRIP_FCS;
1760 if (nic->device_type == XFRAME_II_DEVICE)
1761 writeq(val64, &bar0->mac_cfg);
1762 else {
1763 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1764 writel((u32) (val64), add);
1765 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
1766 writel((u32) (val64 >> 32), (add + 4));
1767 }
1768
1769 /*
1770 * Set the time value to be inserted in the pause frame
1771 * generated by xena.
1772 */
1773 val64 = readq(&bar0->rmac_pause_cfg);
1774 val64 &= ~(RMAC_PAUSE_HG_PTIME(0xffff));
1775 val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
1776 writeq(val64, &bar0->rmac_pause_cfg);
1777
1778 /*
1779 * Set the Threshold Limit for Generating the pause frame
1780 * If the amount of data in any Queue exceeds ratio of
1781 * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
1782 * pause frame is generated
1783 */
1784 val64 = 0;
1785 for (i = 0; i < 4; i++) {
1786 val64 |= (((u64)0xFF00 |
1787 nic->mac_control.mc_pause_threshold_q0q3)
1788 << (i * 2 * 8));
1789 }
1790 writeq(val64, &bar0->mc_pause_thresh_q0q3);
1791
1792 val64 = 0;
1793 for (i = 0; i < 4; i++) {
1794 val64 |= (((u64)0xFF00 |
1795 nic->mac_control.mc_pause_threshold_q4q7)
1796 << (i * 2 * 8));
1797 }
1798 writeq(val64, &bar0->mc_pause_thresh_q4q7);
1799
1800 /*
1801 * TxDMA will stop Read request if the number of read split has
1802 * exceeded the limit pointed by shared_splits
1803 */
1804 val64 = readq(&bar0->pic_control);
1805 val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
1806 writeq(val64, &bar0->pic_control);
1807
1808 if (nic->config.bus_speed == 266) {
1809 writeq(TXREQTO_VAL(0x7f) | TXREQTO_EN, &bar0->txreqtimeout);
1810 writeq(0x0, &bar0->read_retry_delay);
1811 writeq(0x0, &bar0->write_retry_delay);
1812 }
1813
1814 /*
1815 * Programming the Herc to split every write transaction
1816 * that does not start on an ADB to reduce disconnects.
1817 */
1818 if (nic->device_type == XFRAME_II_DEVICE) {
1819 val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
1820 MISC_LINK_STABILITY_PRD(3);
1821 writeq(val64, &bar0->misc_control);
1822 val64 = readq(&bar0->pic_control2);
1823 val64 &= ~(s2BIT(13)|s2BIT(14)|s2BIT(15));
1824 writeq(val64, &bar0->pic_control2);
1825 }
1826 if (strstr(nic->product_name, "CX4")) {
1827 val64 = TMAC_AVG_IPG(0x17);
1828 writeq(val64, &bar0->tmac_avg_ipg);
1829 }
1830
1831 return SUCCESS;
1832 }
1833 #define LINK_UP_DOWN_INTERRUPT 1
1834 #define MAC_RMAC_ERR_TIMER 2
1835
1836 static int s2io_link_fault_indication(struct s2io_nic *nic)
1837 {
1838 if (nic->device_type == XFRAME_II_DEVICE)
1839 return LINK_UP_DOWN_INTERRUPT;
1840 else
1841 return MAC_RMAC_ERR_TIMER;
1842 }
1843
1844 /**
1845 * do_s2io_write_bits - update alarm bits in alarm register
1846 * @value: alarm bits
1847 * @flag: interrupt status
1848 * @addr: address value
1849 * Description: update alarm bits in alarm register
1850 * Return Value:
1851 * NONE.
1852 */
1853 static void do_s2io_write_bits(u64 value, int flag, void __iomem *addr)
1854 {
1855 u64 temp64;
1856
1857 temp64 = readq(addr);
1858
1859 if (flag == ENABLE_INTRS)
1860 temp64 &= ~((u64)value);
1861 else
1862 temp64 |= ((u64)value);
1863 writeq(temp64, addr);
1864 }
1865
1866 static void en_dis_err_alarms(struct s2io_nic *nic, u16 mask, int flag)
1867 {
1868 struct XENA_dev_config __iomem *bar0 = nic->bar0;
1869 register u64 gen_int_mask = 0;
1870 u64 interruptible;
1871
1872 writeq(DISABLE_ALL_INTRS, &bar0->general_int_mask);
1873 if (mask & TX_DMA_INTR) {
1874 gen_int_mask |= TXDMA_INT_M;
1875
1876 do_s2io_write_bits(TXDMA_TDA_INT | TXDMA_PFC_INT |
1877 TXDMA_PCC_INT | TXDMA_TTI_INT |
1878 TXDMA_LSO_INT | TXDMA_TPA_INT |
1879 TXDMA_SM_INT, flag, &bar0->txdma_int_mask);
1880
1881 do_s2io_write_bits(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
1882 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
1883 PFC_PCIX_ERR | PFC_ECC_SG_ERR, flag,
1884 &bar0->pfc_err_mask);
1885
1886 do_s2io_write_bits(TDA_Fn_ECC_DB_ERR | TDA_SM0_ERR_ALARM |
1887 TDA_SM1_ERR_ALARM | TDA_Fn_ECC_SG_ERR |
1888 TDA_PCIX_ERR, flag, &bar0->tda_err_mask);
1889
1890 do_s2io_write_bits(PCC_FB_ECC_DB_ERR | PCC_TXB_ECC_DB_ERR |
1891 PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
1892 PCC_N_SERR | PCC_6_COF_OV_ERR |
1893 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
1894 PCC_7_LSO_OV_ERR | PCC_FB_ECC_SG_ERR |
1895 PCC_TXB_ECC_SG_ERR,
1896 flag, &bar0->pcc_err_mask);
1897
1898 do_s2io_write_bits(TTI_SM_ERR_ALARM | TTI_ECC_SG_ERR |
1899 TTI_ECC_DB_ERR, flag, &bar0->tti_err_mask);
1900
1901 do_s2io_write_bits(LSO6_ABORT | LSO7_ABORT |
1902 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM |
1903 LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
1904 flag, &bar0->lso_err_mask);
1905
1906 do_s2io_write_bits(TPA_SM_ERR_ALARM | TPA_TX_FRM_DROP,
1907 flag, &bar0->tpa_err_mask);
1908
1909 do_s2io_write_bits(SM_SM_ERR_ALARM, flag, &bar0->sm_err_mask);
1910 }
1911
1912 if (mask & TX_MAC_INTR) {
1913 gen_int_mask |= TXMAC_INT_M;
1914 do_s2io_write_bits(MAC_INT_STATUS_TMAC_INT, flag,
1915 &bar0->mac_int_mask);
1916 do_s2io_write_bits(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR |
1917 TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
1918 TMAC_DESC_ECC_SG_ERR | TMAC_DESC_ECC_DB_ERR,
1919 flag, &bar0->mac_tmac_err_mask);
1920 }
1921
1922 if (mask & TX_XGXS_INTR) {
1923 gen_int_mask |= TXXGXS_INT_M;
1924 do_s2io_write_bits(XGXS_INT_STATUS_TXGXS, flag,
1925 &bar0->xgxs_int_mask);
1926 do_s2io_write_bits(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR |
1927 TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
1928 flag, &bar0->xgxs_txgxs_err_mask);
1929 }
1930
1931 if (mask & RX_DMA_INTR) {
1932 gen_int_mask |= RXDMA_INT_M;
1933 do_s2io_write_bits(RXDMA_INT_RC_INT_M | RXDMA_INT_RPA_INT_M |
1934 RXDMA_INT_RDA_INT_M | RXDMA_INT_RTI_INT_M,
1935 flag, &bar0->rxdma_int_mask);
1936 do_s2io_write_bits(RC_PRCn_ECC_DB_ERR | RC_FTC_ECC_DB_ERR |
1937 RC_PRCn_SM_ERR_ALARM | RC_FTC_SM_ERR_ALARM |
1938 RC_PRCn_ECC_SG_ERR | RC_FTC_ECC_SG_ERR |
1939 RC_RDA_FAIL_WR_Rn, flag, &bar0->rc_err_mask);
1940 do_s2io_write_bits(PRC_PCI_AB_RD_Rn | PRC_PCI_AB_WR_Rn |
1941 PRC_PCI_AB_F_WR_Rn | PRC_PCI_DP_RD_Rn |
1942 PRC_PCI_DP_WR_Rn | PRC_PCI_DP_F_WR_Rn, flag,
1943 &bar0->prc_pcix_err_mask);
1944 do_s2io_write_bits(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR |
1945 RPA_ECC_SG_ERR | RPA_ECC_DB_ERR, flag,
1946 &bar0->rpa_err_mask);
1947 do_s2io_write_bits(RDA_RXDn_ECC_DB_ERR | RDA_FRM_ECC_DB_N_AERR |
1948 RDA_SM1_ERR_ALARM | RDA_SM0_ERR_ALARM |
1949 RDA_RXD_ECC_DB_SERR | RDA_RXDn_ECC_SG_ERR |
1950 RDA_FRM_ECC_SG_ERR |
1951 RDA_MISC_ERR|RDA_PCIX_ERR,
1952 flag, &bar0->rda_err_mask);
1953 do_s2io_write_bits(RTI_SM_ERR_ALARM |
1954 RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
1955 flag, &bar0->rti_err_mask);
1956 }
1957
1958 if (mask & RX_MAC_INTR) {
1959 gen_int_mask |= RXMAC_INT_M;
1960 do_s2io_write_bits(MAC_INT_STATUS_RMAC_INT, flag,
1961 &bar0->mac_int_mask);
1962 interruptible = (RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR |
1963 RMAC_UNUSED_INT | RMAC_SINGLE_ECC_ERR |
1964 RMAC_DOUBLE_ECC_ERR);
1965 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER)
1966 interruptible |= RMAC_LINK_STATE_CHANGE_INT;
1967 do_s2io_write_bits(interruptible,
1968 flag, &bar0->mac_rmac_err_mask);
1969 }
1970
1971 if (mask & RX_XGXS_INTR) {
1972 gen_int_mask |= RXXGXS_INT_M;
1973 do_s2io_write_bits(XGXS_INT_STATUS_RXGXS, flag,
1974 &bar0->xgxs_int_mask);
1975 do_s2io_write_bits(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR, flag,
1976 &bar0->xgxs_rxgxs_err_mask);
1977 }
1978
1979 if (mask & MC_INTR) {
1980 gen_int_mask |= MC_INT_M;
1981 do_s2io_write_bits(MC_INT_MASK_MC_INT,
1982 flag, &bar0->mc_int_mask);
1983 do_s2io_write_bits(MC_ERR_REG_SM_ERR | MC_ERR_REG_ECC_ALL_SNG |
1984 MC_ERR_REG_ECC_ALL_DBL | PLL_LOCK_N, flag,
1985 &bar0->mc_err_mask);
1986 }
1987 nic->general_int_mask = gen_int_mask;
1988
1989 /* Remove this line when alarm interrupts are enabled */
1990 nic->general_int_mask = 0;
1991 }
1992
1993 /**
1994 * en_dis_able_nic_intrs - Enable or Disable the interrupts
1995 * @nic: device private variable,
1996 * @mask: A mask indicating which Intr block must be modified and,
1997 * @flag: A flag indicating whether to enable or disable the Intrs.
1998 * Description: This function will either disable or enable the interrupts
1999 * depending on the flag argument. The mask argument can be used to
2000 * enable/disable any Intr block.
2001 * Return Value: NONE.
2002 */
2003
2004 static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
2005 {
2006 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2007 register u64 temp64 = 0, intr_mask = 0;
2008
2009 intr_mask = nic->general_int_mask;
2010
2011 /* Top level interrupt classification */
2012 /* PIC Interrupts */
2013 if (mask & TX_PIC_INTR) {
2014 /* Enable PIC Intrs in the general intr mask register */
2015 intr_mask |= TXPIC_INT_M;
2016 if (flag == ENABLE_INTRS) {
2017 /*
2018 * If Hercules adapter enable GPIO otherwise
2019 * disable all PCIX, Flash, MDIO, IIC and GPIO
2020 * interrupts for now.
2021 * TODO
2022 */
2023 if (s2io_link_fault_indication(nic) ==
2024 LINK_UP_DOWN_INTERRUPT) {
2025 do_s2io_write_bits(PIC_INT_GPIO, flag,
2026 &bar0->pic_int_mask);
2027 do_s2io_write_bits(GPIO_INT_MASK_LINK_UP, flag,
2028 &bar0->gpio_int_mask);
2029 } else
2030 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2031 } else if (flag == DISABLE_INTRS) {
2032 /*
2033 * Disable PIC Intrs in the general
2034 * intr mask register
2035 */
2036 writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
2037 }
2038 }
2039
2040 /* Tx traffic interrupts */
2041 if (mask & TX_TRAFFIC_INTR) {
2042 intr_mask |= TXTRAFFIC_INT_M;
2043 if (flag == ENABLE_INTRS) {
2044 /*
2045 * Enable all the Tx side interrupts
2046 * writing 0 Enables all 64 TX interrupt levels
2047 */
2048 writeq(0x0, &bar0->tx_traffic_mask);
2049 } else if (flag == DISABLE_INTRS) {
2050 /*
2051 * Disable Tx Traffic Intrs in the general intr mask
2052 * register.
2053 */
2054 writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
2055 }
2056 }
2057
2058 /* Rx traffic interrupts */
2059 if (mask & RX_TRAFFIC_INTR) {
2060 intr_mask |= RXTRAFFIC_INT_M;
2061 if (flag == ENABLE_INTRS) {
2062 /* writing 0 Enables all 8 RX interrupt levels */
2063 writeq(0x0, &bar0->rx_traffic_mask);
2064 } else if (flag == DISABLE_INTRS) {
2065 /*
2066 * Disable Rx Traffic Intrs in the general intr mask
2067 * register.
2068 */
2069 writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
2070 }
2071 }
2072
2073 temp64 = readq(&bar0->general_int_mask);
2074 if (flag == ENABLE_INTRS)
2075 temp64 &= ~((u64)intr_mask);
2076 else
2077 temp64 = DISABLE_ALL_INTRS;
2078 writeq(temp64, &bar0->general_int_mask);
2079
2080 nic->general_int_mask = readq(&bar0->general_int_mask);
2081 }
2082
2083 /**
2084 * verify_pcc_quiescent- Checks for PCC quiescent state
2085 * Return: 1 If PCC is quiescence
2086 * 0 If PCC is not quiescence
2087 */
2088 static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
2089 {
2090 int ret = 0, herc;
2091 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2092 u64 val64 = readq(&bar0->adapter_status);
2093
2094 herc = (sp->device_type == XFRAME_II_DEVICE);
2095
2096 if (flag == false) {
2097 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2098 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
2099 ret = 1;
2100 } else {
2101 if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2102 ret = 1;
2103 }
2104 } else {
2105 if ((!herc && (sp->pdev->revision >= 4)) || herc) {
2106 if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
2107 ADAPTER_STATUS_RMAC_PCC_IDLE))
2108 ret = 1;
2109 } else {
2110 if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
2111 ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
2112 ret = 1;
2113 }
2114 }
2115
2116 return ret;
2117 }
2118 /**
2119 * verify_xena_quiescence - Checks whether the H/W is ready
2120 * Description: Returns whether the H/W is ready to go or not. Depending
2121 * on whether adapter enable bit was written or not the comparison
2122 * differs and the calling function passes the input argument flag to
2123 * indicate this.
2124 * Return: 1 If xena is quiescence
2125 * 0 If Xena is not quiescence
2126 */
2127
2128 static int verify_xena_quiescence(struct s2io_nic *sp)
2129 {
2130 int mode;
2131 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2132 u64 val64 = readq(&bar0->adapter_status);
2133 mode = s2io_verify_pci_mode(sp);
2134
2135 if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
2136 DBG_PRINT(ERR_DBG, "TDMA is not ready!\n");
2137 return 0;
2138 }
2139 if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
2140 DBG_PRINT(ERR_DBG, "RDMA is not ready!\n");
2141 return 0;
2142 }
2143 if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
2144 DBG_PRINT(ERR_DBG, "PFC is not ready!\n");
2145 return 0;
2146 }
2147 if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
2148 DBG_PRINT(ERR_DBG, "TMAC BUF is not empty!\n");
2149 return 0;
2150 }
2151 if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
2152 DBG_PRINT(ERR_DBG, "PIC is not QUIESCENT!\n");
2153 return 0;
2154 }
2155 if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
2156 DBG_PRINT(ERR_DBG, "MC_DRAM is not ready!\n");
2157 return 0;
2158 }
2159 if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
2160 DBG_PRINT(ERR_DBG, "MC_QUEUES is not ready!\n");
2161 return 0;
2162 }
2163 if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
2164 DBG_PRINT(ERR_DBG, "M_PLL is not locked!\n");
2165 return 0;
2166 }
2167
2168 /*
2169 * In PCI 33 mode, the P_PLL is not used, and therefore,
2170 * the the P_PLL_LOCK bit in the adapter_status register will
2171 * not be asserted.
2172 */
2173 if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
2174 sp->device_type == XFRAME_II_DEVICE &&
2175 mode != PCI_MODE_PCI_33) {
2176 DBG_PRINT(ERR_DBG, "P_PLL is not locked!\n");
2177 return 0;
2178 }
2179 if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
2180 ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
2181 DBG_PRINT(ERR_DBG, "RC_PRC is not QUIESCENT!\n");
2182 return 0;
2183 }
2184 return 1;
2185 }
2186
2187 /**
2188 * fix_mac_address - Fix for Mac addr problem on Alpha platforms
2189 * @sp: Pointer to device specifc structure
2190 * Description :
2191 * New procedure to clear mac address reading problems on Alpha platforms
2192 *
2193 */
2194
2195 static void fix_mac_address(struct s2io_nic *sp)
2196 {
2197 struct XENA_dev_config __iomem *bar0 = sp->bar0;
2198 int i = 0;
2199
2200 while (fix_mac[i] != END_SIGN) {
2201 writeq(fix_mac[i++], &bar0->gpio_control);
2202 udelay(10);
2203 (void) readq(&bar0->gpio_control);
2204 }
2205 }
2206
2207 /**
2208 * start_nic - Turns the device on
2209 * @nic : device private variable.
2210 * Description:
2211 * This function actually turns the device on. Before this function is
2212 * called,all Registers are configured from their reset states
2213 * and shared memory is allocated but the NIC is still quiescent. On
2214 * calling this function, the device interrupts are cleared and the NIC is
2215 * literally switched on by writing into the adapter control register.
2216 * Return Value:
2217 * SUCCESS on success and -1 on failure.
2218 */
2219
2220 static int start_nic(struct s2io_nic *nic)
2221 {
2222 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2223 struct net_device *dev = nic->dev;
2224 register u64 val64 = 0;
2225 u16 subid, i;
2226 struct config_param *config = &nic->config;
2227 struct mac_info *mac_control = &nic->mac_control;
2228
2229 /* PRC Initialization and configuration */
2230 for (i = 0; i < config->rx_ring_num; i++) {
2231 struct ring_info *ring = &mac_control->rings[i];
2232
2233 writeq((u64)ring->rx_blocks[0].block_dma_addr,
2234 &bar0->prc_rxd0_n[i]);
2235
2236 val64 = readq(&bar0->prc_ctrl_n[i]);
2237 if (nic->rxd_mode == RXD_MODE_1)
2238 val64 |= PRC_CTRL_RC_ENABLED;
2239 else
2240 val64 |= PRC_CTRL_RC_ENABLED | PRC_CTRL_RING_MODE_3;
2241 if (nic->device_type == XFRAME_II_DEVICE)
2242 val64 |= PRC_CTRL_GROUP_READS;
2243 val64 &= ~PRC_CTRL_RXD_BACKOFF_INTERVAL(0xFFFFFF);
2244 val64 |= PRC_CTRL_RXD_BACKOFF_INTERVAL(0x1000);
2245 writeq(val64, &bar0->prc_ctrl_n[i]);
2246 }
2247
2248 if (nic->rxd_mode == RXD_MODE_3B) {
2249 /* Enabling 2 buffer mode by writing into Rx_pa_cfg reg. */
2250 val64 = readq(&bar0->rx_pa_cfg);
2251 val64 |= RX_PA_CFG_IGNORE_L2_ERR;
2252 writeq(val64, &bar0->rx_pa_cfg);
2253 }
2254
2255 if (vlan_tag_strip == 0) {
2256 val64 = readq(&bar0->rx_pa_cfg);
2257 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
2258 writeq(val64, &bar0->rx_pa_cfg);
2259 nic->vlan_strip_flag = 0;
2260 }
2261
2262 /*
2263 * Enabling MC-RLDRAM. After enabling the device, we timeout
2264 * for around 100ms, which is approximately the time required
2265 * for the device to be ready for operation.
2266 */
2267 val64 = readq(&bar0->mc_rldram_mrs);
2268 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE | MC_RLDRAM_MRS_ENABLE;
2269 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
2270 val64 = readq(&bar0->mc_rldram_mrs);
2271
2272 msleep(100); /* Delay by around 100 ms. */
2273
2274 /* Enabling ECC Protection. */
2275 val64 = readq(&bar0->adapter_control);
2276 val64 &= ~ADAPTER_ECC_EN;
2277 writeq(val64, &bar0->adapter_control);
2278
2279 /*
2280 * Verify if the device is ready to be enabled, if so enable
2281 * it.
2282 */
2283 val64 = readq(&bar0->adapter_status);
2284 if (!verify_xena_quiescence(nic)) {
2285 DBG_PRINT(ERR_DBG, "%s: device is not ready, "
2286 "Adapter status reads: 0x%llx\n",
2287 dev->name, (unsigned long long)val64);
2288 return FAILURE;
2289 }
2290
2291 /*
2292 * With some switches, link might be already up at this point.
2293 * Because of this weird behavior, when we enable laser,
2294 * we may not get link. We need to handle this. We cannot
2295 * figure out which switch is misbehaving. So we are forced to
2296 * make a global change.
2297 */
2298
2299 /* Enabling Laser. */
2300 val64 = readq(&bar0->adapter_control);
2301 val64 |= ADAPTER_EOI_TX_ON;
2302 writeq(val64, &bar0->adapter_control);
2303
2304 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
2305 /*
2306 * Dont see link state interrupts initially on some switches,
2307 * so directly scheduling the link state task here.
2308 */
2309 schedule_work(&nic->set_link_task);
2310 }
2311 /* SXE-002: Initialize link and activity LED */
2312 subid = nic->pdev->subsystem_device;
2313 if (((subid & 0xFF) >= 0x07) &&
2314 (nic->device_type == XFRAME_I_DEVICE)) {
2315 val64 = readq(&bar0->gpio_control);
2316 val64 |= 0x0000800000000000ULL;
2317 writeq(val64, &bar0->gpio_control);
2318 val64 = 0x0411040400000000ULL;
2319 writeq(val64, (void __iomem *)bar0 + 0x2700);
2320 }
2321
2322 return SUCCESS;
2323 }
2324 /**
2325 * s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
2326 */
2327 static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data,
2328 struct TxD *txdlp, int get_off)
2329 {
2330 struct s2io_nic *nic = fifo_data->nic;
2331 struct sk_buff *skb;
2332 struct TxD *txds;
2333 u16 j, frg_cnt;
2334
2335 txds = txdlp;
2336 if (txds->Host_Control == (u64)(long)fifo_data->ufo_in_band_v) {
2337 pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
2338 sizeof(u64), PCI_DMA_TODEVICE);
2339 txds++;
2340 }
2341
2342 skb = (struct sk_buff *)((unsigned long)txds->Host_Control);
2343 if (!skb) {
2344 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2345 return NULL;
2346 }
2347 pci_unmap_single(nic->pdev, (dma_addr_t)txds->Buffer_Pointer,
2348 skb_headlen(skb), PCI_DMA_TODEVICE);
2349 frg_cnt = skb_shinfo(skb)->nr_frags;
2350 if (frg_cnt) {
2351 txds++;
2352 for (j = 0; j < frg_cnt; j++, txds++) {
2353 const skb_frag_t *frag = &skb_shinfo(skb)->frags[j];
2354 if (!txds->Buffer_Pointer)
2355 break;
2356 pci_unmap_page(nic->pdev,
2357 (dma_addr_t)txds->Buffer_Pointer,
2358 skb_frag_size(frag), PCI_DMA_TODEVICE);
2359 }
2360 }
2361 memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
2362 return skb;
2363 }
2364
2365 /**
2366 * free_tx_buffers - Free all queued Tx buffers
2367 * @nic : device private variable.
2368 * Description:
2369 * Free all queued Tx buffers.
2370 * Return Value: void
2371 */
2372
2373 static void free_tx_buffers(struct s2io_nic *nic)
2374 {
2375 struct net_device *dev = nic->dev;
2376 struct sk_buff *skb;
2377 struct TxD *txdp;
2378 int i, j;
2379 int cnt = 0;
2380 struct config_param *config = &nic->config;
2381 struct mac_info *mac_control = &nic->mac_control;
2382 struct stat_block *stats = mac_control->stats_info;
2383 struct swStat *swstats = &stats->sw_stat;
2384
2385 for (i = 0; i < config->tx_fifo_num; i++) {
2386 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
2387 struct fifo_info *fifo = &mac_control->fifos[i];
2388 unsigned long flags;
2389
2390 spin_lock_irqsave(&fifo->tx_lock, flags);
2391 for (j = 0; j < tx_cfg->fifo_len; j++) {
2392 txdp = fifo->list_info[j].list_virt_addr;
2393 skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
2394 if (skb) {
2395 swstats->mem_freed += skb->truesize;
2396 dev_kfree_skb(skb);
2397 cnt++;
2398 }
2399 }
2400 DBG_PRINT(INTR_DBG,
2401 "%s: forcibly freeing %d skbs on FIFO%d\n",
2402 dev->name, cnt, i);
2403 fifo->tx_curr_get_info.offset = 0;
2404 fifo->tx_curr_put_info.offset = 0;
2405 spin_unlock_irqrestore(&fifo->tx_lock, flags);
2406 }
2407 }
2408
2409 /**
2410 * stop_nic - To stop the nic
2411 * @nic ; device private variable.
2412 * Description:
2413 * This function does exactly the opposite of what the start_nic()
2414 * function does. This function is called to stop the device.
2415 * Return Value:
2416 * void.
2417 */
2418
2419 static void stop_nic(struct s2io_nic *nic)
2420 {
2421 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2422 register u64 val64 = 0;
2423 u16 interruptible;
2424
2425 /* Disable all interrupts */
2426 en_dis_err_alarms(nic, ENA_ALL_INTRS, DISABLE_INTRS);
2427 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
2428 interruptible |= TX_PIC_INTR;
2429 en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
2430
2431 /* Clearing Adapter_En bit of ADAPTER_CONTROL Register */
2432 val64 = readq(&bar0->adapter_control);
2433 val64 &= ~(ADAPTER_CNTL_EN);
2434 writeq(val64, &bar0->adapter_control);
2435 }
2436
2437 /**
2438 * fill_rx_buffers - Allocates the Rx side skbs
2439 * @ring_info: per ring structure
2440 * @from_card_up: If this is true, we will map the buffer to get
2441 * the dma address for buf0 and buf1 to give it to the card.
2442 * Else we will sync the already mapped buffer to give it to the card.
2443 * Description:
2444 * The function allocates Rx side skbs and puts the physical
2445 * address of these buffers into the RxD buffer pointers, so that the NIC
2446 * can DMA the received frame into these locations.
2447 * The NIC supports 3 receive modes, viz
2448 * 1. single buffer,
2449 * 2. three buffer and
2450 * 3. Five buffer modes.
2451 * Each mode defines how many fragments the received frame will be split
2452 * up into by the NIC. The frame is split into L3 header, L4 Header,
2453 * L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
2454 * is split into 3 fragments. As of now only single buffer mode is
2455 * supported.
2456 * Return Value:
2457 * SUCCESS on success or an appropriate -ve value on failure.
2458 */
2459 static int fill_rx_buffers(struct s2io_nic *nic, struct ring_info *ring,
2460 int from_card_up)
2461 {
2462 struct sk_buff *skb;
2463 struct RxD_t *rxdp;
2464 int off, size, block_no, block_no1;
2465 u32 alloc_tab = 0;
2466 u32 alloc_cnt;
2467 u64 tmp;
2468 struct buffAdd *ba;
2469 struct RxD_t *first_rxdp = NULL;
2470 u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
2471 int rxd_index = 0;
2472 struct RxD1 *rxdp1;
2473 struct RxD3 *rxdp3;
2474 struct swStat *swstats = &ring->nic->mac_control.stats_info->sw_stat;
2475
2476 alloc_cnt = ring->pkt_cnt - ring->rx_bufs_left;
2477
2478 block_no1 = ring->rx_curr_get_info.block_index;
2479 while (alloc_tab < alloc_cnt) {
2480 block_no = ring->rx_curr_put_info.block_index;
2481
2482 off = ring->rx_curr_put_info.offset;
2483
2484 rxdp = ring->rx_blocks[block_no].rxds[off].virt_addr;
2485
2486 rxd_index = off + 1;
2487 if (block_no)
2488 rxd_index += (block_no * ring->rxd_count);
2489
2490 if ((block_no == block_no1) &&
2491 (off == ring->rx_curr_get_info.offset) &&
2492 (rxdp->Host_Control)) {
2493 DBG_PRINT(INTR_DBG, "%s: Get and Put info equated\n",
2494 ring->dev->name);
2495 goto end;
2496 }
2497 if (off && (off == ring->rxd_count)) {
2498 ring->rx_curr_put_info.block_index++;
2499 if (ring->rx_curr_put_info.block_index ==
2500 ring->block_count)
2501 ring->rx_curr_put_info.block_index = 0;
2502 block_no = ring->rx_curr_put_info.block_index;
2503 off = 0;
2504 ring->rx_curr_put_info.offset = off;
2505 rxdp = ring->rx_blocks[block_no].block_virt_addr;
2506 DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
2507 ring->dev->name, rxdp);
2508
2509 }
2510
2511 if ((rxdp->Control_1 & RXD_OWN_XENA) &&
2512 ((ring->rxd_mode == RXD_MODE_3B) &&
2513 (rxdp->Control_2 & s2BIT(0)))) {
2514 ring->rx_curr_put_info.offset = off;
2515 goto end;
2516 }
2517 /* calculate size of skb based on ring mode */
2518 size = ring->mtu +
2519 HEADER_ETHERNET_II_802_3_SIZE +
2520 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
2521 if (ring->rxd_mode == RXD_MODE_1)
2522 size += NET_IP_ALIGN;
2523 else
2524 size = ring->mtu + ALIGN_SIZE + BUF0_LEN + 4;
2525
2526 /* allocate skb */
2527 skb = dev_alloc_skb(size);
2528 if (!skb) {
2529 DBG_PRINT(INFO_DBG, "%s: Could not allocate skb\n",
2530 ring->dev->name);
2531 if (first_rxdp) {
2532 wmb();
2533 first_rxdp->Control_1 |= RXD_OWN_XENA;
2534 }
2535 swstats->mem_alloc_fail_cnt++;
2536
2537 return -ENOMEM ;
2538 }
2539 swstats->mem_allocated += skb->truesize;
2540
2541 if (ring->rxd_mode == RXD_MODE_1) {
2542 /* 1 buffer mode - normal operation mode */
2543 rxdp1 = (struct RxD1 *)rxdp;
2544 memset(rxdp, 0, sizeof(struct RxD1));
2545 skb_reserve(skb, NET_IP_ALIGN);
2546 rxdp1->Buffer0_ptr =
2547 pci_map_single(ring->pdev, skb->data,
2548 size - NET_IP_ALIGN,
2549 PCI_DMA_FROMDEVICE);
2550 if (pci_dma_mapping_error(nic->pdev,
2551 rxdp1->Buffer0_ptr))
2552 goto pci_map_failed;
2553
2554 rxdp->Control_2 =
2555 SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
2556 rxdp->Host_Control = (unsigned long)skb;
2557 } else if (ring->rxd_mode == RXD_MODE_3B) {
2558 /*
2559 * 2 buffer mode -
2560 * 2 buffer mode provides 128
2561 * byte aligned receive buffers.
2562 */
2563
2564 rxdp3 = (struct RxD3 *)rxdp;
2565 /* save buffer pointers to avoid frequent dma mapping */
2566 Buffer0_ptr = rxdp3->Buffer0_ptr;
2567 Buffer1_ptr = rxdp3->Buffer1_ptr;
2568 memset(rxdp, 0, sizeof(struct RxD3));
2569 /* restore the buffer pointers for dma sync*/
2570 rxdp3->Buffer0_ptr = Buffer0_ptr;
2571 rxdp3->Buffer1_ptr = Buffer1_ptr;
2572
2573 ba = &ring->ba[block_no][off];
2574 skb_reserve(skb, BUF0_LEN);
2575 tmp = (u64)(unsigned long)skb->data;
2576 tmp += ALIGN_SIZE;
2577 tmp &= ~ALIGN_SIZE;
2578 skb->data = (void *) (unsigned long)tmp;
2579 skb_reset_tail_pointer(skb);
2580
2581 if (from_card_up) {
2582 rxdp3->Buffer0_ptr =
2583 pci_map_single(ring->pdev, ba->ba_0,
2584 BUF0_LEN,
2585 PCI_DMA_FROMDEVICE);
2586 if (pci_dma_mapping_error(nic->pdev,
2587 rxdp3->Buffer0_ptr))
2588 goto pci_map_failed;
2589 } else
2590 pci_dma_sync_single_for_device(ring->pdev,
2591 (dma_addr_t)rxdp3->Buffer0_ptr,
2592 BUF0_LEN,
2593 PCI_DMA_FROMDEVICE);
2594
2595 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
2596 if (ring->rxd_mode == RXD_MODE_3B) {
2597 /* Two buffer mode */
2598
2599 /*
2600 * Buffer2 will have L3/L4 header plus
2601 * L4 payload
2602 */
2603 rxdp3->Buffer2_ptr = pci_map_single(ring->pdev,
2604 skb->data,
2605 ring->mtu + 4,
2606 PCI_DMA_FROMDEVICE);
2607
2608 if (pci_dma_mapping_error(nic->pdev,
2609 rxdp3->Buffer2_ptr))
2610 goto pci_map_failed;
2611
2612 if (from_card_up) {
2613 rxdp3->Buffer1_ptr =
2614 pci_map_single(ring->pdev,
2615 ba->ba_1,
2616 BUF1_LEN,
2617 PCI_DMA_FROMDEVICE);
2618
2619 if (pci_dma_mapping_error(nic->pdev,
2620 rxdp3->Buffer1_ptr)) {
2621 pci_unmap_single(ring->pdev,
2622 (dma_addr_t)(unsigned long)
2623 skb->data,
2624 ring->mtu + 4,
2625 PCI_DMA_FROMDEVICE);
2626 goto pci_map_failed;
2627 }
2628 }
2629 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
2630 rxdp->Control_2 |= SET_BUFFER2_SIZE_3
2631 (ring->mtu + 4);
2632 }
2633 rxdp->Control_2 |= s2BIT(0);
2634 rxdp->Host_Control = (unsigned long) (skb);
2635 }
2636 if (alloc_tab & ((1 << rxsync_frequency) - 1))
2637 rxdp->Control_1 |= RXD_OWN_XENA;
2638 off++;
2639 if (off == (ring->rxd_count + 1))
2640 off = 0;
2641 ring->rx_curr_put_info.offset = off;
2642
2643 rxdp->Control_2 |= SET_RXD_MARKER;
2644 if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
2645 if (first_rxdp) {
2646 wmb();
2647 first_rxdp->Control_1 |= RXD_OWN_XENA;
2648 }
2649 first_rxdp = rxdp;
2650 }
2651 ring->rx_bufs_left += 1;
2652 alloc_tab++;
2653 }
2654
2655 end:
2656 /* Transfer ownership of first descriptor to adapter just before
2657 * exiting. Before that, use memory barrier so that ownership
2658 * and other fields are seen by adapter correctly.
2659 */
2660 if (first_rxdp) {
2661 wmb();
2662 first_rxdp->Control_1 |= RXD_OWN_XENA;
2663 }
2664
2665 return SUCCESS;
2666
2667 pci_map_failed:
2668 swstats->pci_map_fail_cnt++;
2669 swstats->mem_freed += skb->truesize;
2670 dev_kfree_skb_irq(skb);
2671 return -ENOMEM;
2672 }
2673
2674 static void free_rxd_blk(struct s2io_nic *sp, int ring_no, int blk)
2675 {
2676 struct net_device *dev = sp->dev;
2677 int j;
2678 struct sk_buff *skb;
2679 struct RxD_t *rxdp;
2680 struct RxD1 *rxdp1;
2681 struct RxD3 *rxdp3;
2682 struct mac_info *mac_control = &sp->mac_control;
2683 struct stat_block *stats = mac_control->stats_info;
2684 struct swStat *swstats = &stats->sw_stat;
2685
2686 for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
2687 rxdp = mac_control->rings[ring_no].
2688 rx_blocks[blk].rxds[j].virt_addr;
2689 skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
2690 if (!skb)
2691 continue;
2692 if (sp->rxd_mode == RXD_MODE_1) {
2693 rxdp1 = (struct RxD1 *)rxdp;
2694 pci_unmap_single(sp->pdev,
2695 (dma_addr_t)rxdp1->Buffer0_ptr,
2696 dev->mtu +
2697 HEADER_ETHERNET_II_802_3_SIZE +
2698 HEADER_802_2_SIZE + HEADER_SNAP_SIZE,
2699 PCI_DMA_FROMDEVICE);
2700 memset(rxdp, 0, sizeof(struct RxD1));
2701 } else if (sp->rxd_mode == RXD_MODE_3B) {
2702 rxdp3 = (struct RxD3 *)rxdp;
2703 pci_unmap_single(sp->pdev,
2704 (dma_addr_t)rxdp3->Buffer0_ptr,
2705 BUF0_LEN,
2706 PCI_DMA_FROMDEVICE);
2707 pci_unmap_single(sp->pdev,
2708 (dma_addr_t)rxdp3->Buffer1_ptr,
2709 BUF1_LEN,
2710 PCI_DMA_FROMDEVICE);
2711 pci_unmap_single(sp->pdev,
2712 (dma_addr_t)rxdp3->Buffer2_ptr,
2713 dev->mtu + 4,
2714 PCI_DMA_FROMDEVICE);
2715 memset(rxdp, 0, sizeof(struct RxD3));
2716 }
2717 swstats->mem_freed += skb->truesize;
2718 dev_kfree_skb(skb);
2719 mac_control->rings[ring_no].rx_bufs_left -= 1;
2720 }
2721 }
2722
2723 /**
2724 * free_rx_buffers - Frees all Rx buffers
2725 * @sp: device private variable.
2726 * Description:
2727 * This function will free all Rx buffers allocated by host.
2728 * Return Value:
2729 * NONE.
2730 */
2731
2732 static void free_rx_buffers(struct s2io_nic *sp)
2733 {
2734 struct net_device *dev = sp->dev;
2735 int i, blk = 0, buf_cnt = 0;
2736 struct config_param *config = &sp->config;
2737 struct mac_info *mac_control = &sp->mac_control;
2738
2739 for (i = 0; i < config->rx_ring_num; i++) {
2740 struct ring_info *ring = &mac_control->rings[i];
2741
2742 for (blk = 0; blk < rx_ring_sz[i]; blk++)
2743 free_rxd_blk(sp, i, blk);
2744
2745 ring->rx_curr_put_info.block_index = 0;
2746 ring->rx_curr_get_info.block_index = 0;
2747 ring->rx_curr_put_info.offset = 0;
2748 ring->rx_curr_get_info.offset = 0;
2749 ring->rx_bufs_left = 0;
2750 DBG_PRINT(INIT_DBG, "%s: Freed 0x%x Rx Buffers on ring%d\n",
2751 dev->name, buf_cnt, i);
2752 }
2753 }
2754
2755 static int s2io_chk_rx_buffers(struct s2io_nic *nic, struct ring_info *ring)
2756 {
2757 if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
2758 DBG_PRINT(INFO_DBG, "%s: Out of memory in Rx Intr!!\n",
2759 ring->dev->name);
2760 }
2761 return 0;
2762 }
2763
2764 /**
2765 * s2io_poll - Rx interrupt handler for NAPI support
2766 * @napi : pointer to the napi structure.
2767 * @budget : The number of packets that were budgeted to be processed
2768 * during one pass through the 'Poll" function.
2769 * Description:
2770 * Comes into picture only if NAPI support has been incorporated. It does
2771 * the same thing that rx_intr_handler does, but not in a interrupt context
2772 * also It will process only a given number of packets.
2773 * Return value:
2774 * 0 on success and 1 if there are No Rx packets to be processed.
2775 */
2776
2777 static int s2io_poll_msix(struct napi_struct *napi, int budget)
2778 {
2779 struct ring_info *ring = container_of(napi, struct ring_info, napi);
2780 struct net_device *dev = ring->dev;
2781 int pkts_processed = 0;
2782 u8 __iomem *addr = NULL;
2783 u8 val8 = 0;
2784 struct s2io_nic *nic = netdev_priv(dev);
2785 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2786 int budget_org = budget;
2787
2788 if (unlikely(!is_s2io_card_up(nic)))
2789 return 0;
2790
2791 pkts_processed = rx_intr_handler(ring, budget);
2792 s2io_chk_rx_buffers(nic, ring);
2793
2794 if (pkts_processed < budget_org) {
2795 napi_complete(napi);
2796 /*Re Enable MSI-Rx Vector*/
2797 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
2798 addr += 7 - ring->ring_no;
2799 val8 = (ring->ring_no == 0) ? 0x3f : 0xbf;
2800 writeb(val8, addr);
2801 val8 = readb(addr);
2802 }
2803 return pkts_processed;
2804 }
2805
2806 static int s2io_poll_inta(struct napi_struct *napi, int budget)
2807 {
2808 struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi);
2809 int pkts_processed = 0;
2810 int ring_pkts_processed, i;
2811 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2812 int budget_org = budget;
2813 struct config_param *config = &nic->config;
2814 struct mac_info *mac_control = &nic->mac_control;
2815
2816 if (unlikely(!is_s2io_card_up(nic)))
2817 return 0;
2818
2819 for (i = 0; i < config->rx_ring_num; i++) {
2820 struct ring_info *ring = &mac_control->rings[i];
2821 ring_pkts_processed = rx_intr_handler(ring, budget);
2822 s2io_chk_rx_buffers(nic, ring);
2823 pkts_processed += ring_pkts_processed;
2824 budget -= ring_pkts_processed;
2825 if (budget <= 0)
2826 break;
2827 }
2828 if (pkts_processed < budget_org) {
2829 napi_complete(napi);
2830 /* Re enable the Rx interrupts for the ring */
2831 writeq(0, &bar0->rx_traffic_mask);
2832 readl(&bar0->rx_traffic_mask);
2833 }
2834 return pkts_processed;
2835 }
2836
2837 #ifdef CONFIG_NET_POLL_CONTROLLER
2838 /**
2839 * s2io_netpoll - netpoll event handler entry point
2840 * @dev : pointer to the device structure.
2841 * Description:
2842 * This function will be called by upper layer to check for events on the
2843 * interface in situations where interrupts are disabled. It is used for
2844 * specific in-kernel networking tasks, such as remote consoles and kernel
2845 * debugging over the network (example netdump in RedHat).
2846 */
2847 static void s2io_netpoll(struct net_device *dev)
2848 {
2849 struct s2io_nic *nic = netdev_priv(dev);
2850 struct XENA_dev_config __iomem *bar0 = nic->bar0;
2851 u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
2852 int i;
2853 struct config_param *config = &nic->config;
2854 struct mac_info *mac_control = &nic->mac_control;
2855
2856 if (pci_channel_offline(nic->pdev))
2857 return;
2858
2859 disable_irq(dev->irq);
2860
2861 writeq(val64, &bar0->rx_traffic_int);
2862 writeq(val64, &bar0->tx_traffic_int);
2863
2864 /* we need to free up the transmitted skbufs or else netpoll will
2865 * run out of skbs and will fail and eventually netpoll application such
2866 * as netdump will fail.
2867 */
2868 for (i = 0; i < config->tx_fifo_num; i++)
2869 tx_intr_handler(&mac_control->fifos[i]);
2870
2871 /* check for received packet and indicate up to network */
2872 for (i = 0; i < config->rx_ring_num; i++) {
2873 struct ring_info *ring = &mac_control->rings[i];
2874
2875 rx_intr_handler(ring, 0);
2876 }
2877
2878 for (i = 0; i < config->rx_ring_num; i++) {
2879 struct ring_info *ring = &mac_control->rings[i];
2880
2881 if (fill_rx_buffers(nic, ring, 0) == -ENOMEM) {
2882 DBG_PRINT(INFO_DBG,
2883 "%s: Out of memory in Rx Netpoll!!\n",
2884 dev->name);
2885 break;
2886 }
2887 }
2888 enable_irq(dev->irq);
2889 }
2890 #endif
2891
2892 /**
2893 * rx_intr_handler - Rx interrupt handler
2894 * @ring_info: per ring structure.
2895 * @budget: budget for napi processing.
2896 * Description:
2897 * If the interrupt is because of a received frame or if the
2898 * receive ring contains fresh as yet un-processed frames,this function is
2899 * called. It picks out the RxD at which place the last Rx processing had
2900 * stopped and sends the skb to the OSM's Rx handler and then increments
2901 * the offset.
2902 * Return Value:
2903 * No. of napi packets processed.
2904 */
2905 static int rx_intr_handler(struct ring_info *ring_data, int budget)
2906 {
2907 int get_block, put_block;
2908 struct rx_curr_get_info get_info, put_info;
2909 struct RxD_t *rxdp;
2910 struct sk_buff *skb;
2911 int pkt_cnt = 0, napi_pkts = 0;
2912 int i;
2913 struct RxD1 *rxdp1;
2914 struct RxD3 *rxdp3;
2915
2916 get_info = ring_data->rx_curr_get_info;
2917 get_block = get_info.block_index;
2918 memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
2919 put_block = put_info.block_index;
2920 rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
2921
2922 while (RXD_IS_UP2DT(rxdp)) {
2923 /*
2924 * If your are next to put index then it's
2925 * FIFO full condition
2926 */
2927 if ((get_block == put_block) &&
2928 (get_info.offset + 1) == put_info.offset) {
2929 DBG_PRINT(INTR_DBG, "%s: Ring Full\n",
2930 ring_data->dev->name);
2931 break;
2932 }
2933 skb = (struct sk_buff *)((unsigned long)rxdp->Host_Control);
2934 if (skb == NULL) {
2935 DBG_PRINT(ERR_DBG, "%s: NULL skb in Rx Intr\n",
2936 ring_data->dev->name);
2937 return 0;
2938 }
2939 if (ring_data->rxd_mode == RXD_MODE_1) {
2940 rxdp1 = (struct RxD1 *)rxdp;
2941 pci_unmap_single(ring_data->pdev, (dma_addr_t)
2942 rxdp1->Buffer0_ptr,
2943 ring_data->mtu +
2944 HEADER_ETHERNET_II_802_3_SIZE +
2945 HEADER_802_2_SIZE +
2946 HEADER_SNAP_SIZE,
2947 PCI_DMA_FROMDEVICE);
2948 } else if (ring_data->rxd_mode == RXD_MODE_3B) {
2949 rxdp3 = (struct RxD3 *)rxdp;
2950 pci_dma_sync_single_for_cpu(ring_data->pdev,
2951 (dma_addr_t)rxdp3->Buffer0_ptr,
2952 BUF0_LEN,
2953 PCI_DMA_FROMDEVICE);
2954 pci_unmap_single(ring_data->pdev,
2955 (dma_addr_t)rxdp3->Buffer2_ptr,
2956 ring_data->mtu + 4,
2957 PCI_DMA_FROMDEVICE);
2958 }
2959 prefetch(skb->data);
2960 rx_osm_handler(ring_data, rxdp);
2961 get_info.offset++;
2962 ring_data->rx_curr_get_info.offset = get_info.offset;
2963 rxdp = ring_data->rx_blocks[get_block].
2964 rxds[get_info.offset].virt_addr;
2965 if (get_info.offset == rxd_count[ring_data->rxd_mode]) {
2966 get_info.offset = 0;
2967 ring_data->rx_curr_get_info.offset = get_info.offset;
2968 get_block++;
2969 if (get_block == ring_data->block_count)
2970 get_block = 0;
2971 ring_data->rx_curr_get_info.block_index = get_block;
2972 rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
2973 }
2974
2975 if (ring_data->nic->config.napi) {
2976 budget--;
2977 napi_pkts++;
2978 if (!budget)
2979 break;
2980 }
2981 pkt_cnt++;
2982 if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
2983 break;
2984 }
2985 if (ring_data->lro) {
2986 /* Clear all LRO sessions before exiting */
2987 for (i = 0; i < MAX_LRO_SESSIONS; i++) {
2988 struct lro *lro = &ring_data->lro0_n[i];
2989 if (lro->in_use) {
2990 update_L3L4_header(ring_data->nic, lro);
2991 queue_rx_frame(lro->parent, lro->vlan_tag);
2992 clear_lro_session(lro);
2993 }
2994 }
2995 }
2996 return napi_pkts;
2997 }
2998
2999 /**
3000 * tx_intr_handler - Transmit interrupt handler
3001 * @nic : device private variable
3002 * Description:
3003 * If an interrupt was raised to indicate DMA complete of the
3004 * Tx packet, this function is called. It identifies the last TxD
3005 * whose buffer was freed and frees all skbs whose data have already
3006 * DMA'ed into the NICs internal memory.
3007 * Return Value:
3008 * NONE
3009 */
3010
3011 static void tx_intr_handler(struct fifo_info *fifo_data)
3012 {
3013 struct s2io_nic *nic = fifo_data->nic;
3014 struct tx_curr_get_info get_info, put_info;
3015 struct sk_buff *skb = NULL;
3016 struct TxD *txdlp;
3017 int pkt_cnt = 0;
3018 unsigned long flags = 0;
3019 u8 err_mask;
3020 struct stat_block *stats = nic->mac_control.stats_info;
3021 struct swStat *swstats = &stats->sw_stat;
3022
3023 if (!spin_trylock_irqsave(&fifo_data->tx_lock, flags))
3024 return;
3025
3026 get_info = fifo_data->tx_curr_get_info;
3027 memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
3028 txdlp = fifo_data->list_info[get_info.offset].list_virt_addr;
3029 while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
3030 (get_info.offset != put_info.offset) &&
3031 (txdlp->Host_Control)) {
3032 /* Check for TxD errors */
3033 if (txdlp->Control_1 & TXD_T_CODE) {
3034 unsigned long long err;
3035 err = txdlp->Control_1 & TXD_T_CODE;
3036 if (err & 0x1) {
3037 swstats->parity_err_cnt++;
3038 }
3039
3040 /* update t_code statistics */
3041 err_mask = err >> 48;
3042 switch (err_mask) {
3043 case 2:
3044 swstats->tx_buf_abort_cnt++;
3045 break;
3046
3047 case 3:
3048 swstats->tx_desc_abort_cnt++;
3049 break;
3050
3051 case 7:
3052 swstats->tx_parity_err_cnt++;
3053 break;
3054
3055 case 10:
3056 swstats->tx_link_loss_cnt++;
3057 break;
3058
3059 case 15:
3060 swstats->tx_list_proc_err_cnt++;
3061 break;
3062 }
3063 }
3064
3065 skb = s2io_txdl_getskb(fifo_data, txdlp, get_info.offset);
3066 if (skb == NULL) {
3067 spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3068 DBG_PRINT(ERR_DBG, "%s: NULL skb in Tx Free Intr\n",
3069 __func__);
3070 return;
3071 }
3072 pkt_cnt++;
3073
3074 /* Updating the statistics block */
3075 swstats->mem_freed += skb->truesize;
3076 dev_kfree_skb_irq(skb);
3077
3078 get_info.offset++;
3079 if (get_info.offset == get_info.fifo_len + 1)
3080 get_info.offset = 0;
3081 txdlp = fifo_data->list_info[get_info.offset].list_virt_addr;
3082 fifo_data->tx_curr_get_info.offset = get_info.offset;
3083 }
3084
3085 s2io_wake_tx_queue(fifo_data, pkt_cnt, nic->config.multiq);
3086
3087 spin_unlock_irqrestore(&fifo_data->tx_lock, flags);
3088 }
3089
3090 /**
3091 * s2io_mdio_write - Function to write in to MDIO registers
3092 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3093 * @addr : address value
3094 * @value : data value
3095 * @dev : pointer to net_device structure
3096 * Description:
3097 * This function is used to write values to the MDIO registers
3098 * NONE
3099 */
3100 static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value,
3101 struct net_device *dev)
3102 {
3103 u64 val64;
3104 struct s2io_nic *sp = netdev_priv(dev);
3105 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3106
3107 /* address transaction */
3108 val64 = MDIO_MMD_INDX_ADDR(addr) |
3109 MDIO_MMD_DEV_ADDR(mmd_type) |
3110 MDIO_MMS_PRT_ADDR(0x0);
3111 writeq(val64, &bar0->mdio_control);
3112 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3113 writeq(val64, &bar0->mdio_control);
3114 udelay(100);
3115
3116 /* Data transaction */
3117 val64 = MDIO_MMD_INDX_ADDR(addr) |
3118 MDIO_MMD_DEV_ADDR(mmd_type) |
3119 MDIO_MMS_PRT_ADDR(0x0) |
3120 MDIO_MDIO_DATA(value) |
3121 MDIO_OP(MDIO_OP_WRITE_TRANS);
3122 writeq(val64, &bar0->mdio_control);
3123 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3124 writeq(val64, &bar0->mdio_control);
3125 udelay(100);
3126
3127 val64 = MDIO_MMD_INDX_ADDR(addr) |
3128 MDIO_MMD_DEV_ADDR(mmd_type) |
3129 MDIO_MMS_PRT_ADDR(0x0) |
3130 MDIO_OP(MDIO_OP_READ_TRANS);
3131 writeq(val64, &bar0->mdio_control);
3132 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3133 writeq(val64, &bar0->mdio_control);
3134 udelay(100);
3135 }
3136
3137 /**
3138 * s2io_mdio_read - Function to write in to MDIO registers
3139 * @mmd_type : MMD type value (PMA/PMD/WIS/PCS/PHYXS)
3140 * @addr : address value
3141 * @dev : pointer to net_device structure
3142 * Description:
3143 * This function is used to read values to the MDIO registers
3144 * NONE
3145 */
3146 static u64 s2io_mdio_read(u32 mmd_type, u64 addr, struct net_device *dev)
3147 {
3148 u64 val64 = 0x0;
3149 u64 rval64 = 0x0;
3150 struct s2io_nic *sp = netdev_priv(dev);
3151 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3152
3153 /* address transaction */
3154 val64 = val64 | (MDIO_MMD_INDX_ADDR(addr)
3155 | MDIO_MMD_DEV_ADDR(mmd_type)
3156 | MDIO_MMS_PRT_ADDR(0x0));
3157 writeq(val64, &bar0->mdio_control);
3158 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3159 writeq(val64, &bar0->mdio_control);
3160 udelay(100);
3161
3162 /* Data transaction */
3163 val64 = MDIO_MMD_INDX_ADDR(addr) |
3164 MDIO_MMD_DEV_ADDR(mmd_type) |
3165 MDIO_MMS_PRT_ADDR(0x0) |
3166 MDIO_OP(MDIO_OP_READ_TRANS);
3167 writeq(val64, &bar0->mdio_control);
3168 val64 = val64 | MDIO_CTRL_START_TRANS(0xE);
3169 writeq(val64, &bar0->mdio_control);
3170 udelay(100);
3171
3172 /* Read the value from regs */
3173 rval64 = readq(&bar0->mdio_control);
3174 rval64 = rval64 & 0xFFFF0000;
3175 rval64 = rval64 >> 16;
3176 return rval64;
3177 }
3178
3179 /**
3180 * s2io_chk_xpak_counter - Function to check the status of the xpak counters
3181 * @counter : counter value to be updated
3182 * @flag : flag to indicate the status
3183 * @type : counter type
3184 * Description:
3185 * This function is to check the status of the xpak counters value
3186 * NONE
3187 */
3188
3189 static void s2io_chk_xpak_counter(u64 *counter, u64 * regs_stat, u32 index,
3190 u16 flag, u16 type)
3191 {
3192 u64 mask = 0x3;
3193 u64 val64;
3194 int i;
3195 for (i = 0; i < index; i++)
3196 mask = mask << 0x2;
3197
3198 if (flag > 0) {
3199 *counter = *counter + 1;
3200 val64 = *regs_stat & mask;
3201 val64 = val64 >> (index * 0x2);
3202 val64 = val64 + 1;
3203 if (val64 == 3) {
3204 switch (type) {
3205 case 1:
3206 DBG_PRINT(ERR_DBG,
3207 "Take Xframe NIC out of service.\n");
3208 DBG_PRINT(ERR_DBG,
3209 "Excessive temperatures may result in premature transceiver failure.\n");
3210 break;
3211 case 2:
3212 DBG_PRINT(ERR_DBG,
3213 "Take Xframe NIC out of service.\n");
3214 DBG_PRINT(ERR_DBG,
3215 "Excessive bias currents may indicate imminent laser diode failure.\n");
3216 break;
3217 case 3:
3218 DBG_PRINT(ERR_DBG,
3219 "Take Xframe NIC out of service.\n");
3220 DBG_PRINT(ERR_DBG,
3221 "Excessive laser output power may saturate far-end receiver.\n");
3222 break;
3223 default:
3224 DBG_PRINT(ERR_DBG,
3225 "Incorrect XPAK Alarm type\n");
3226 }
3227 val64 = 0x0;
3228 }
3229 val64 = val64 << (index * 0x2);
3230 *regs_stat = (*regs_stat & (~mask)) | (val64);
3231
3232 } else {
3233 *regs_stat = *regs_stat & (~mask);
3234 }
3235 }
3236
3237 /**
3238 * s2io_updt_xpak_counter - Function to update the xpak counters
3239 * @dev : pointer to net_device struct
3240 * Description:
3241 * This function is to upate the status of the xpak counters value
3242 * NONE
3243 */
3244 static void s2io_updt_xpak_counter(struct net_device *dev)
3245 {
3246 u16 flag = 0x0;
3247 u16 type = 0x0;
3248 u16 val16 = 0x0;
3249 u64 val64 = 0x0;
3250 u64 addr = 0x0;
3251
3252 struct s2io_nic *sp = netdev_priv(dev);
3253 struct stat_block *stats = sp->mac_control.stats_info;
3254 struct xpakStat *xstats = &stats->xpak_stat;
3255
3256 /* Check the communication with the MDIO slave */
3257 addr = MDIO_CTRL1;
3258 val64 = 0x0;
3259 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3260 if ((val64 == 0xFFFF) || (val64 == 0x0000)) {
3261 DBG_PRINT(ERR_DBG,
3262 "ERR: MDIO slave access failed - Returned %llx\n",
3263 (unsigned long long)val64);
3264 return;
3265 }
3266
3267 /* Check for the expected value of control reg 1 */
3268 if (val64 != MDIO_CTRL1_SPEED10G) {
3269 DBG_PRINT(ERR_DBG, "Incorrect value at PMA address 0x0000 - "
3270 "Returned: %llx- Expected: 0x%x\n",
3271 (unsigned long long)val64, MDIO_CTRL1_SPEED10G);
3272 return;
3273 }
3274
3275 /* Loading the DOM register to MDIO register */
3276 addr = 0xA100;
3277 s2io_mdio_write(MDIO_MMD_PMAPMD, addr, val16, dev);
3278 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3279
3280 /* Reading the Alarm flags */
3281 addr = 0xA070;
3282 val64 = 0x0;
3283 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3284
3285 flag = CHECKBIT(val64, 0x7);
3286 type = 1;
3287 s2io_chk_xpak_counter(&xstats->alarm_transceiver_temp_high,
3288 &xstats->xpak_regs_stat,
3289 0x0, flag, type);
3290
3291 if (CHECKBIT(val64, 0x6))
3292 xstats->alarm_transceiver_temp_low++;
3293
3294 flag = CHECKBIT(val64, 0x3);
3295 type = 2;
3296 s2io_chk_xpak_counter(&xstats->alarm_laser_bias_current_high,
3297 &xstats->xpak_regs_stat,
3298 0x2, flag, type);
3299
3300 if (CHECKBIT(val64, 0x2))
3301 xstats->alarm_laser_bias_current_low++;
3302
3303 flag = CHECKBIT(val64, 0x1);
3304 type = 3;
3305 s2io_chk_xpak_counter(&xstats->alarm_laser_output_power_high,
3306 &xstats->xpak_regs_stat,
3307 0x4, flag, type);
3308
3309 if (CHECKBIT(val64, 0x0))
3310 xstats->alarm_laser_output_power_low++;
3311
3312 /* Reading the Warning flags */
3313 addr = 0xA074;
3314 val64 = 0x0;
3315 val64 = s2io_mdio_read(MDIO_MMD_PMAPMD, addr, dev);
3316
3317 if (CHECKBIT(val64, 0x7))
3318 xstats->warn_transceiver_temp_high++;
3319
3320 if (CHECKBIT(val64, 0x6))
3321 xstats->warn_transceiver_temp_low++;
3322
3323 if (CHECKBIT(val64, 0x3))
3324 xstats->warn_laser_bias_current_high++;
3325
3326 if (CHECKBIT(val64, 0x2))
3327 xstats->warn_laser_bias_current_low++;
3328
3329 if (CHECKBIT(val64, 0x1))
3330 xstats->warn_laser_output_power_high++;
3331
3332 if (CHECKBIT(val64, 0x0))
3333 xstats->warn_laser_output_power_low++;
3334 }
3335
3336 /**
3337 * wait_for_cmd_complete - waits for a command to complete.
3338 * @sp : private member of the device structure, which is a pointer to the
3339 * s2io_nic structure.
3340 * Description: Function that waits for a command to Write into RMAC
3341 * ADDR DATA registers to be completed and returns either success or
3342 * error depending on whether the command was complete or not.
3343 * Return value:
3344 * SUCCESS on success and FAILURE on failure.
3345 */
3346
3347 static int wait_for_cmd_complete(void __iomem *addr, u64 busy_bit,
3348 int bit_state)
3349 {
3350 int ret = FAILURE, cnt = 0, delay = 1;
3351 u64 val64;
3352
3353 if ((bit_state != S2IO_BIT_RESET) && (bit_state != S2IO_BIT_SET))
3354 return FAILURE;
3355
3356 do {
3357 val64 = readq(addr);
3358 if (bit_state == S2IO_BIT_RESET) {
3359 if (!(val64 & busy_bit)) {
3360 ret = SUCCESS;
3361 break;
3362 }
3363 } else {
3364 if (val64 & busy_bit) {
3365 ret = SUCCESS;
3366 break;
3367 }
3368 }
3369
3370 if (in_interrupt())
3371 mdelay(delay);
3372 else
3373 msleep(delay);
3374
3375 if (++cnt >= 10)
3376 delay = 50;
3377 } while (cnt < 20);
3378 return ret;
3379 }
3380 /*
3381 * check_pci_device_id - Checks if the device id is supported
3382 * @id : device id
3383 * Description: Function to check if the pci device id is supported by driver.
3384 * Return value: Actual device id if supported else PCI_ANY_ID
3385 */
3386 static u16 check_pci_device_id(u16 id)
3387 {
3388 switch (id) {
3389 case PCI_DEVICE_ID_HERC_WIN:
3390 case PCI_DEVICE_ID_HERC_UNI:
3391 return XFRAME_II_DEVICE;
3392 case PCI_DEVICE_ID_S2IO_UNI:
3393 case PCI_DEVICE_ID_S2IO_WIN:
3394 return XFRAME_I_DEVICE;
3395 default:
3396 return PCI_ANY_ID;
3397 }
3398 }
3399
3400 /**
3401 * s2io_reset - Resets the card.
3402 * @sp : private member of the device structure.
3403 * Description: Function to Reset the card. This function then also
3404 * restores the previously saved PCI configuration space registers as
3405 * the card reset also resets the configuration space.
3406 * Return value:
3407 * void.
3408 */
3409
3410 static void s2io_reset(struct s2io_nic *sp)
3411 {
3412 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3413 u64 val64;
3414 u16 subid, pci_cmd;
3415 int i;
3416 u16 val16;
3417 unsigned long long up_cnt, down_cnt, up_time, down_time, reset_cnt;
3418 unsigned long long mem_alloc_cnt, mem_free_cnt, watchdog_cnt;
3419 struct stat_block *stats;
3420 struct swStat *swstats;
3421
3422 DBG_PRINT(INIT_DBG, "%s: Resetting XFrame card %s\n",
3423 __func__, pci_name(sp->pdev));
3424
3425 /* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
3426 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
3427
3428 val64 = SW_RESET_ALL;
3429 writeq(val64, &bar0->sw_reset);
3430 if (strstr(sp->product_name, "CX4"))
3431 msleep(750);
3432 msleep(250);
3433 for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
3434
3435 /* Restore the PCI state saved during initialization. */
3436 pci_restore_state(sp->pdev);
3437 pci_save_state(sp->pdev);
3438 pci_read_config_word(sp->pdev, 0x2, &val16);
3439 if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
3440 break;
3441 msleep(200);
3442 }
3443
3444 if (check_pci_device_id(val16) == (u16)PCI_ANY_ID)
3445 DBG_PRINT(ERR_DBG, "%s SW_Reset failed!\n", __func__);
3446
3447 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
3448
3449 s2io_init_pci(sp);
3450
3451 /* Set swapper to enable I/O register access */
3452 s2io_set_swapper(sp);
3453
3454 /* restore mac_addr entries */
3455 do_s2io_restore_unicast_mc(sp);
3456
3457 /* Restore the MSIX table entries from local variables */
3458 restore_xmsi_data(sp);
3459
3460 /* Clear certain PCI/PCI-X fields after reset */
3461 if (sp->device_type == XFRAME_II_DEVICE) {
3462 /* Clear "detected parity error" bit */
3463 pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
3464
3465 /* Clearing PCIX Ecc status register */
3466 pci_write_config_dword(sp->pdev, 0x68, 0x7C);
3467
3468 /* Clearing PCI_STATUS error reflected here */
3469 writeq(s2BIT(62), &bar0->txpic_int_reg);
3470 }
3471
3472 /* Reset device statistics maintained by OS */
3473 memset(&sp->stats, 0, sizeof(struct net_device_stats));
3474
3475 stats = sp->mac_control.stats_info;
3476 swstats = &stats->sw_stat;
3477
3478 /* save link up/down time/cnt, reset/memory/watchdog cnt */
3479 up_cnt = swstats->link_up_cnt;
3480 down_cnt = swstats->link_down_cnt;
3481 up_time = swstats->link_up_time;
3482 down_time = swstats->link_down_time;
3483 reset_cnt = swstats->soft_reset_cnt;
3484 mem_alloc_cnt = swstats->mem_allocated;
3485 mem_free_cnt = swstats->mem_freed;
3486 watchdog_cnt = swstats->watchdog_timer_cnt;
3487
3488 memset(stats, 0, sizeof(struct stat_block));
3489
3490 /* restore link up/down time/cnt, reset/memory/watchdog cnt */
3491 swstats->link_up_cnt = up_cnt;
3492 swstats->link_down_cnt = down_cnt;
3493 swstats->link_up_time = up_time;
3494 swstats->link_down_time = down_time;
3495 swstats->soft_reset_cnt = reset_cnt;
3496 swstats->mem_allocated = mem_alloc_cnt;
3497 swstats->mem_freed = mem_free_cnt;
3498 swstats->watchdog_timer_cnt = watchdog_cnt;
3499
3500 /* SXE-002: Configure link and activity LED to turn it off */
3501 subid = sp->pdev->subsystem_device;
3502 if (((subid & 0xFF) >= 0x07) &&
3503 (sp->device_type == XFRAME_I_DEVICE)) {
3504 val64 = readq(&bar0->gpio_control);
3505 val64 |= 0x0000800000000000ULL;
3506 writeq(val64, &bar0->gpio_control);
3507 val64 = 0x0411040400000000ULL;
3508 writeq(val64, (void __iomem *)bar0 + 0x2700);
3509 }
3510
3511 /*
3512 * Clear spurious ECC interrupts that would have occurred on
3513 * XFRAME II cards after reset.
3514 */
3515 if (sp->device_type == XFRAME_II_DEVICE) {
3516 val64 = readq(&bar0->pcc_err_reg);
3517 writeq(val64, &bar0->pcc_err_reg);
3518 }
3519
3520 sp->device_enabled_once = false;
3521 }
3522
3523 /**
3524 * s2io_set_swapper - to set the swapper controle on the card
3525 * @sp : private member of the device structure,
3526 * pointer to the s2io_nic structure.
3527 * Description: Function to set the swapper control on the card
3528 * correctly depending on the 'endianness' of the system.
3529 * Return value:
3530 * SUCCESS on success and FAILURE on failure.
3531 */
3532
3533 static int s2io_set_swapper(struct s2io_nic *sp)
3534 {
3535 struct net_device *dev = sp->dev;
3536 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3537 u64 val64, valt, valr;
3538
3539 /*
3540 * Set proper endian settings and verify the same by reading
3541 * the PIF Feed-back register.
3542 */
3543
3544 val64 = readq(&bar0->pif_rd_swapper_fb);
3545 if (val64 != 0x0123456789ABCDEFULL) {
3546 int i = 0;
3547 static const u64 value[] = {
3548 0xC30000C3C30000C3ULL, /* FE=1, SE=1 */
3549 0x8100008181000081ULL, /* FE=1, SE=0 */
3550 0x4200004242000042ULL, /* FE=0, SE=1 */
3551 0 /* FE=0, SE=0 */
3552 };
3553
3554 while (i < 4) {
3555 writeq(value[i], &bar0->swapper_ctrl);
3556 val64 = readq(&bar0->pif_rd_swapper_fb);
3557 if (val64 == 0x0123456789ABCDEFULL)
3558 break;
3559 i++;
3560 }
3561 if (i == 4) {
3562 DBG_PRINT(ERR_DBG, "%s: Endian settings are wrong, "
3563 "feedback read %llx\n",
3564 dev->name, (unsigned long long)val64);
3565 return FAILURE;
3566 }
3567 valr = value[i];
3568 } else {
3569 valr = readq(&bar0->swapper_ctrl);
3570 }
3571
3572 valt = 0x0123456789ABCDEFULL;
3573 writeq(valt, &bar0->xmsi_address);
3574 val64 = readq(&bar0->xmsi_address);
3575
3576 if (val64 != valt) {
3577 int i = 0;
3578 static const u64 value[] = {
3579 0x00C3C30000C3C300ULL, /* FE=1, SE=1 */
3580 0x0081810000818100ULL, /* FE=1, SE=0 */
3581 0x0042420000424200ULL, /* FE=0, SE=1 */
3582 0 /* FE=0, SE=0 */
3583 };
3584
3585 while (i < 4) {
3586 writeq((value[i] | valr), &bar0->swapper_ctrl);
3587 writeq(valt, &bar0->xmsi_address);
3588 val64 = readq(&bar0->xmsi_address);
3589 if (val64 == valt)
3590 break;
3591 i++;
3592 }
3593 if (i == 4) {
3594 unsigned long long x = val64;
3595 DBG_PRINT(ERR_DBG,
3596 "Write failed, Xmsi_addr reads:0x%llx\n", x);
3597 return FAILURE;
3598 }
3599 }
3600 val64 = readq(&bar0->swapper_ctrl);
3601 val64 &= 0xFFFF000000000000ULL;
3602
3603 #ifdef __BIG_ENDIAN
3604 /*
3605 * The device by default set to a big endian format, so a
3606 * big endian driver need not set anything.
3607 */
3608 val64 |= (SWAPPER_CTRL_TXP_FE |
3609 SWAPPER_CTRL_TXP_SE |
3610 SWAPPER_CTRL_TXD_R_FE |
3611 SWAPPER_CTRL_TXD_W_FE |
3612 SWAPPER_CTRL_TXF_R_FE |
3613 SWAPPER_CTRL_RXD_R_FE |
3614 SWAPPER_CTRL_RXD_W_FE |
3615 SWAPPER_CTRL_RXF_W_FE |
3616 SWAPPER_CTRL_XMSI_FE |
3617 SWAPPER_CTRL_STATS_FE |
3618 SWAPPER_CTRL_STATS_SE);
3619 if (sp->config.intr_type == INTA)
3620 val64 |= SWAPPER_CTRL_XMSI_SE;
3621 writeq(val64, &bar0->swapper_ctrl);
3622 #else
3623 /*
3624 * Initially we enable all bits to make it accessible by the
3625 * driver, then we selectively enable only those bits that
3626 * we want to set.
3627 */
3628 val64 |= (SWAPPER_CTRL_TXP_FE |
3629 SWAPPER_CTRL_TXP_SE |
3630 SWAPPER_CTRL_TXD_R_FE |
3631 SWAPPER_CTRL_TXD_R_SE |
3632 SWAPPER_CTRL_TXD_W_FE |
3633 SWAPPER_CTRL_TXD_W_SE |
3634 SWAPPER_CTRL_TXF_R_FE |
3635 SWAPPER_CTRL_RXD_R_FE |
3636 SWAPPER_CTRL_RXD_R_SE |
3637 SWAPPER_CTRL_RXD_W_FE |
3638 SWAPPER_CTRL_RXD_W_SE |
3639 SWAPPER_CTRL_RXF_W_FE |
3640 SWAPPER_CTRL_XMSI_FE |
3641 SWAPPER_CTRL_STATS_FE |
3642 SWAPPER_CTRL_STATS_SE);
3643 if (sp->config.intr_type == INTA)
3644 val64 |= SWAPPER_CTRL_XMSI_SE;
3645 writeq(val64, &bar0->swapper_ctrl);
3646 #endif
3647 val64 = readq(&bar0->swapper_ctrl);
3648
3649 /*
3650 * Verifying if endian settings are accurate by reading a
3651 * feedback register.
3652 */
3653 val64 = readq(&bar0->pif_rd_swapper_fb);
3654 if (val64 != 0x0123456789ABCDEFULL) {
3655 /* Endian settings are incorrect, calls for another dekko. */
3656 DBG_PRINT(ERR_DBG,
3657 "%s: Endian settings are wrong, feedback read %llx\n",
3658 dev->name, (unsigned long long)val64);
3659 return FAILURE;
3660 }
3661
3662 return SUCCESS;
3663 }
3664
3665 static int wait_for_msix_trans(struct s2io_nic *nic, int i)
3666 {
3667 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3668 u64 val64;
3669 int ret = 0, cnt = 0;
3670
3671 do {
3672 val64 = readq(&bar0->xmsi_access);
3673 if (!(val64 & s2BIT(15)))
3674 break;
3675 mdelay(1);
3676 cnt++;
3677 } while (cnt < 5);
3678 if (cnt == 5) {
3679 DBG_PRINT(ERR_DBG, "XMSI # %d Access failed\n", i);
3680 ret = 1;
3681 }
3682
3683 return ret;
3684 }
3685
3686 static void restore_xmsi_data(struct s2io_nic *nic)
3687 {
3688 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3689 u64 val64;
3690 int i, msix_index;
3691
3692 if (nic->device_type == XFRAME_I_DEVICE)
3693 return;
3694
3695 for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
3696 msix_index = (i) ? ((i-1) * 8 + 1) : 0;
3697 writeq(nic->msix_info[i].addr, &bar0->xmsi_address);
3698 writeq(nic->msix_info[i].data, &bar0->xmsi_data);
3699 val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6));
3700 writeq(val64, &bar0->xmsi_access);
3701 if (wait_for_msix_trans(nic, msix_index)) {
3702 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
3703 __func__, msix_index);
3704 continue;
3705 }
3706 }
3707 }
3708
3709 static void store_xmsi_data(struct s2io_nic *nic)
3710 {
3711 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3712 u64 val64, addr, data;
3713 int i, msix_index;
3714
3715 if (nic->device_type == XFRAME_I_DEVICE)
3716 return;
3717
3718 /* Store and display */
3719 for (i = 0; i < MAX_REQUESTED_MSI_X; i++) {
3720 msix_index = (i) ? ((i-1) * 8 + 1) : 0;
3721 val64 = (s2BIT(15) | vBIT(msix_index, 26, 6));
3722 writeq(val64, &bar0->xmsi_access);
3723 if (wait_for_msix_trans(nic, msix_index)) {
3724 DBG_PRINT(ERR_DBG, "%s: index: %d failed\n",
3725 __func__, msix_index);
3726 continue;
3727 }
3728 addr = readq(&bar0->xmsi_address);
3729 data = readq(&bar0->xmsi_data);
3730 if (addr && data) {
3731 nic->msix_info[i].addr = addr;
3732 nic->msix_info[i].data = data;
3733 }
3734 }
3735 }
3736
3737 static int s2io_enable_msi_x(struct s2io_nic *nic)
3738 {
3739 struct XENA_dev_config __iomem *bar0 = nic->bar0;
3740 u64 rx_mat;
3741 u16 msi_control; /* Temp variable */
3742 int ret, i, j, msix_indx = 1;
3743 int size;
3744 struct stat_block *stats = nic->mac_control.stats_info;
3745 struct swStat *swstats = &stats->sw_stat;
3746
3747 size = nic->num_entries * sizeof(struct msix_entry);
3748 nic->entries = kzalloc(size, GFP_KERNEL);
3749 if (!nic->entries) {
3750 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3751 __func__);
3752 swstats->mem_alloc_fail_cnt++;
3753 return -ENOMEM;
3754 }
3755 swstats->mem_allocated += size;
3756
3757 size = nic->num_entries * sizeof(struct s2io_msix_entry);
3758 nic->s2io_entries = kzalloc(size, GFP_KERNEL);
3759 if (!nic->s2io_entries) {
3760 DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n",
3761 __func__);
3762 swstats->mem_alloc_fail_cnt++;
3763 kfree(nic->entries);
3764 swstats->mem_freed
3765 += (nic->num_entries * sizeof(struct msix_entry));
3766 return -ENOMEM;
3767 }
3768 swstats->mem_allocated += size;
3769
3770 nic->entries[0].entry = 0;
3771 nic->s2io_entries[0].entry = 0;
3772 nic->s2io_entries[0].in_use = MSIX_FLG;
3773 nic->s2io_entries[0].type = MSIX_ALARM_TYPE;
3774 nic->s2io_entries[0].arg = &nic->mac_control.fifos;
3775
3776 for (i = 1; i < nic->num_entries; i++) {
3777 nic->entries[i].entry = ((i - 1) * 8) + 1;
3778 nic->s2io_entries[i].entry = ((i - 1) * 8) + 1;
3779 nic->s2io_entries[i].arg = NULL;
3780 nic->s2io_entries[i].in_use = 0;
3781 }
3782
3783 rx_mat = readq(&bar0->rx_mat);
3784 for (j = 0; j < nic->config.rx_ring_num; j++) {
3785 rx_mat |= RX_MAT_SET(j, msix_indx);
3786 nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j];
3787 nic->s2io_entries[j+1].type = MSIX_RING_TYPE;
3788 nic->s2io_entries[j+1].in_use = MSIX_FLG;
3789 msix_indx += 8;
3790 }
3791 writeq(rx_mat, &bar0->rx_mat);
3792 readq(&bar0->rx_mat);
3793
3794 ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries);
3795 /* We fail init if error or we get less vectors than min required */
3796 if (ret) {
3797 DBG_PRINT(ERR_DBG, "Enabling MSI-X failed\n");
3798 kfree(nic->entries);
3799 swstats->mem_freed += nic->num_entries *
3800 sizeof(struct msix_entry);
3801 kfree(nic->s2io_entries);
3802 swstats->mem_freed += nic->num_entries *
3803 sizeof(struct s2io_msix_entry);
3804 nic->entries = NULL;
3805 nic->s2io_entries = NULL;
3806 return -ENOMEM;
3807 }
3808
3809 /*
3810 * To enable MSI-X, MSI also needs to be enabled, due to a bug
3811 * in the herc NIC. (Temp change, needs to be removed later)
3812 */
3813 pci_read_config_word(nic->pdev, 0x42, &msi_control);
3814 msi_control |= 0x1; /* Enable MSI */
3815 pci_write_config_word(nic->pdev, 0x42, msi_control);
3816
3817 return 0;
3818 }
3819
3820 /* Handle software interrupt used during MSI(X) test */
3821 static irqreturn_t s2io_test_intr(int irq, void *dev_id)
3822 {
3823 struct s2io_nic *sp = dev_id;
3824
3825 sp->msi_detected = 1;
3826 wake_up(&sp->msi_wait);
3827
3828 return IRQ_HANDLED;
3829 }
3830
3831 /* Test interrupt path by forcing a a software IRQ */
3832 static int s2io_test_msi(struct s2io_nic *sp)
3833 {
3834 struct pci_dev *pdev = sp->pdev;
3835 struct XENA_dev_config __iomem *bar0 = sp->bar0;
3836 int err;
3837 u64 val64, saved64;
3838
3839 err = request_irq(sp->entries[1].vector, s2io_test_intr, 0,
3840 sp->name, sp);
3841 if (err) {
3842 DBG_PRINT(ERR_DBG, "%s: PCI %s: cannot assign irq %d\n",
3843 sp->dev->name, pci_name(pdev), pdev->irq);
3844 return err;
3845 }
3846
3847 init_waitqueue_head(&sp->msi_wait);
3848 sp->msi_detected = 0;
3849
3850 saved64 = val64 = readq(&bar0->scheduled_int_ctrl);
3851 val64 |= SCHED_INT_CTRL_ONE_SHOT;
3852 val64 |= SCHED_INT_CTRL_TIMER_EN;
3853 val64 |= SCHED_INT_CTRL_INT2MSI(1);
3854 writeq(val64, &bar0->scheduled_int_ctrl);
3855
3856 wait_event_timeout(sp->msi_wait, sp->msi_detected, HZ/10);
3857
3858 if (!sp->msi_detected) {
3859 /* MSI(X) test failed, go back to INTx mode */
3860 DBG_PRINT(ERR_DBG, "%s: PCI %s: No interrupt was generated "
3861 "using MSI(X) during test\n",
3862 sp->dev->name, pci_name(pdev));
3863
3864 err = -EOPNOTSUPP;
3865 }
3866
3867 free_irq(sp->entries[1].vector, sp);
3868
3869 writeq(saved64, &bar0->scheduled_int_ctrl);
3870
3871 return err;
3872 }
3873
3874 static void remove_msix_isr(struct s2io_nic *sp)
3875 {
3876 int i;
3877 u16 msi_control;
3878
3879 for (i = 0; i < sp->num_entries; i++) {
3880 if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) {
3881 int vector = sp->entries[i].vector;
3882 void *arg = sp->s2io_entries[i].arg;
3883 free_irq(vector, arg);
3884 }
3885 }
3886
3887 kfree(sp->entries);
3888 kfree(sp->s2io_entries);
3889 sp->entries = NULL;
3890 sp->s2io_entries = NULL;
3891
3892 pci_read_config_word(sp->pdev, 0x42, &msi_control);
3893 msi_control &= 0xFFFE; /* Disable MSI */
3894 pci_write_config_word(sp->pdev, 0x42, msi_control);
3895
3896 pci_disable_msix(sp->pdev);
3897 }
3898
3899 static void remove_inta_isr(struct s2io_nic *sp)
3900 {
3901 struct net_device *dev = sp->dev;
3902
3903 free_irq(sp->pdev->irq, dev);
3904 }
3905
3906 /* ********************************************************* *
3907 * Functions defined below concern the OS part of the driver *
3908 * ********************************************************* */
3909
3910 /**
3911 * s2io_open - open entry point of the driver
3912 * @dev : pointer to the device structure.
3913 * Description:
3914 * This function is the open entry point of the driver. It mainly calls a
3915 * function to allocate Rx buffers and inserts them into the buffer
3916 * descriptors and then enables the Rx part of the NIC.
3917 * Return value:
3918 * 0 on success and an appropriate (-)ve integer as defined in errno.h
3919 * file on failure.
3920 */
3921
3922 static int s2io_open(struct net_device *dev)
3923 {
3924 struct s2io_nic *sp = netdev_priv(dev);
3925 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
3926 int err = 0;
3927
3928 /*
3929 * Make sure you have link off by default every time
3930 * Nic is initialized
3931 */
3932 netif_carrier_off(dev);
3933 sp->last_link_state = 0;
3934
3935 /* Initialize H/W and enable interrupts */
3936 err = s2io_card_up(sp);
3937 if (err) {
3938 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
3939 dev->name);
3940 goto hw_init_failed;
3941 }
3942
3943 if (do_s2io_prog_unicast(dev, dev->dev_addr) == FAILURE) {
3944 DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
3945 s2io_card_down(sp);
3946 err = -ENODEV;
3947 goto hw_init_failed;
3948 }
3949 s2io_start_all_tx_queue(sp);
3950 return 0;
3951
3952 hw_init_failed:
3953 if (sp->config.intr_type == MSI_X) {
3954 if (sp->entries) {
3955 kfree(sp->entries);
3956 swstats->mem_freed += sp->num_entries *
3957 sizeof(struct msix_entry);
3958 }
3959 if (sp->s2io_entries) {
3960 kfree(sp->s2io_entries);
3961 swstats->mem_freed += sp->num_entries *
3962 sizeof(struct s2io_msix_entry);
3963 }
3964 }
3965 return err;
3966 }
3967
3968 /**
3969 * s2io_close -close entry point of the driver
3970 * @dev : device pointer.
3971 * Description:
3972 * This is the stop entry point of the driver. It needs to undo exactly
3973 * whatever was done by the open entry point,thus it's usually referred to
3974 * as the close function.Among other things this function mainly stops the
3975 * Rx side of the NIC and frees all the Rx buffers in the Rx rings.
3976 * Return value:
3977 * 0 on success and an appropriate (-)ve integer as defined in errno.h
3978 * file on failure.
3979 */
3980
3981 static int s2io_close(struct net_device *dev)
3982 {
3983 struct s2io_nic *sp = netdev_priv(dev);
3984 struct config_param *config = &sp->config;
3985 u64 tmp64;
3986 int offset;
3987
3988 /* Return if the device is already closed *
3989 * Can happen when s2io_card_up failed in change_mtu *
3990 */
3991 if (!is_s2io_card_up(sp))
3992 return 0;
3993
3994 s2io_stop_all_tx_queue(sp);
3995 /* delete all populated mac entries */
3996 for (offset = 1; offset < config->max_mc_addr; offset++) {
3997 tmp64 = do_s2io_read_unicast_mc(sp, offset);
3998 if (tmp64 != S2IO_DISABLE_MAC_ENTRY)
3999 do_s2io_delete_unicast_mc(sp, tmp64);
4000 }
4001
4002 s2io_card_down(sp);
4003
4004 return 0;
4005 }
4006
4007 /**
4008 * s2io_xmit - Tx entry point of te driver
4009 * @skb : the socket buffer containing the Tx data.
4010 * @dev : device pointer.
4011 * Description :
4012 * This function is the Tx entry point of the driver. S2IO NIC supports
4013 * certain protocol assist features on Tx side, namely CSO, S/G, LSO.
4014 * NOTE: when device can't queue the pkt,just the trans_start variable will
4015 * not be upadted.
4016 * Return value:
4017 * 0 on success & 1 on failure.
4018 */
4019
4020 static netdev_tx_t s2io_xmit(struct sk_buff *skb, struct net_device *dev)
4021 {
4022 struct s2io_nic *sp = netdev_priv(dev);
4023 u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
4024 register u64 val64;
4025 struct TxD *txdp;
4026 struct TxFIFO_element __iomem *tx_fifo;
4027 unsigned long flags = 0;
4028 u16 vlan_tag = 0;
4029 struct fifo_info *fifo = NULL;
4030 int do_spin_lock = 1;
4031 int offload_type;
4032 int enable_per_list_interrupt = 0;
4033 struct config_param *config = &sp->config;
4034 struct mac_info *mac_control = &sp->mac_control;
4035 struct stat_block *stats = mac_control->stats_info;
4036 struct swStat *swstats = &stats->sw_stat;
4037
4038 DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
4039
4040 if (unlikely(skb->len <= 0)) {
4041 DBG_PRINT(TX_DBG, "%s: Buffer has no data..\n", dev->name);
4042 dev_kfree_skb_any(skb);
4043 return NETDEV_TX_OK;
4044 }
4045
4046 if (!is_s2io_card_up(sp)) {
4047 DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
4048 dev->name);
4049 dev_kfree_skb(skb);
4050 return NETDEV_TX_OK;
4051 }
4052
4053 queue = 0;
4054 if (vlan_tx_tag_present(skb))
4055 vlan_tag = vlan_tx_tag_get(skb);
4056 if (sp->config.tx_steering_type == TX_DEFAULT_STEERING) {
4057 if (skb->protocol == htons(ETH_P_IP)) {
4058 struct iphdr *ip;
4059 struct tcphdr *th;
4060 ip = ip_hdr(skb);
4061
4062 if (!ip_is_fragment(ip)) {
4063 th = (struct tcphdr *)(((unsigned char *)ip) +
4064 ip->ihl*4);
4065
4066 if (ip->protocol == IPPROTO_TCP) {
4067 queue_len = sp->total_tcp_fifos;
4068 queue = (ntohs(th->source) +
4069 ntohs(th->dest)) &
4070 sp->fifo_selector[queue_len - 1];
4071 if (queue >= queue_len)
4072 queue = queue_len - 1;
4073 } else if (ip->protocol == IPPROTO_UDP) {
4074 queue_len = sp->total_udp_fifos;
4075 queue = (ntohs(th->source) +
4076 ntohs(th->dest)) &
4077 sp->fifo_selector[queue_len - 1];
4078 if (queue >= queue_len)
4079 queue = queue_len - 1;
4080 queue += sp->udp_fifo_idx;
4081 if (skb->len > 1024)
4082 enable_per_list_interrupt = 1;
4083 do_spin_lock = 0;
4084 }
4085 }
4086 }
4087 } else if (sp->config.tx_steering_type == TX_PRIORITY_STEERING)
4088 /* get fifo number based on skb->priority value */
4089 queue = config->fifo_mapping
4090 [skb->priority & (MAX_TX_FIFOS - 1)];
4091 fifo = &mac_control->fifos[queue];
4092
4093 if (do_spin_lock)
4094 spin_lock_irqsave(&fifo->tx_lock, flags);
4095 else {
4096 if (unlikely(!spin_trylock_irqsave(&fifo->tx_lock, flags)))
4097 return NETDEV_TX_LOCKED;
4098 }
4099
4100 if (sp->config.multiq) {
4101 if (__netif_subqueue_stopped(dev, fifo->fifo_no)) {
4102 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4103 return NETDEV_TX_BUSY;
4104 }
4105 } else if (unlikely(fifo->queue_state == FIFO_QUEUE_STOP)) {
4106 if (netif_queue_stopped(dev)) {
4107 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4108 return NETDEV_TX_BUSY;
4109 }
4110 }
4111
4112 put_off = (u16)fifo->tx_curr_put_info.offset;
4113 get_off = (u16)fifo->tx_curr_get_info.offset;
4114 txdp = fifo->list_info[put_off].list_virt_addr;
4115
4116 queue_len = fifo->tx_curr_put_info.fifo_len + 1;
4117 /* Avoid "put" pointer going beyond "get" pointer */
4118 if (txdp->Host_Control ||
4119 ((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4120 DBG_PRINT(TX_DBG, "Error in xmit, No free TXDs.\n");
4121 s2io_stop_tx_queue(sp, fifo->fifo_no);
4122 dev_kfree_skb(skb);
4123 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4124 return NETDEV_TX_OK;
4125 }
4126
4127 offload_type = s2io_offload_type(skb);
4128 if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
4129 txdp->Control_1 |= TXD_TCP_LSO_EN;
4130 txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
4131 }
4132 if (skb->ip_summed == CHECKSUM_PARTIAL) {
4133 txdp->Control_2 |= (TXD_TX_CKO_IPV4_EN |
4134 TXD_TX_CKO_TCP_EN |
4135 TXD_TX_CKO_UDP_EN);
4136 }
4137 txdp->Control_1 |= TXD_GATHER_CODE_FIRST;
4138 txdp->Control_1 |= TXD_LIST_OWN_XENA;
4139 txdp->Control_2 |= TXD_INT_NUMBER(fifo->fifo_no);
4140 if (enable_per_list_interrupt)
4141 if (put_off & (queue_len >> 5))
4142 txdp->Control_2 |= TXD_INT_TYPE_PER_LIST;
4143 if (vlan_tag) {
4144 txdp->Control_2 |= TXD_VLAN_ENABLE;
4145 txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
4146 }
4147
4148 frg_len = skb_headlen(skb);
4149 if (offload_type == SKB_GSO_UDP) {
4150 int ufo_size;
4151
4152 ufo_size = s2io_udp_mss(skb);
4153 ufo_size &= ~7;
4154 txdp->Control_1 |= TXD_UFO_EN;
4155 txdp->Control_1 |= TXD_UFO_MSS(ufo_size);
4156 txdp->Control_1 |= TXD_BUFFER0_SIZE(8);
4157 #ifdef __BIG_ENDIAN
4158 /* both variants do cpu_to_be64(be32_to_cpu(...)) */
4159 fifo->ufo_in_band_v[put_off] =
4160 (__force u64)skb_shinfo(skb)->ip6_frag_id;
4161 #else
4162 fifo->ufo_in_band_v[put_off] =
4163 (__force u64)skb_shinfo(skb)->ip6_frag_id << 32;
4164 #endif
4165 txdp->Host_Control = (unsigned long)fifo->ufo_in_band_v;
4166 txdp->Buffer_Pointer = pci_map_single(sp->pdev,
4167 fifo->ufo_in_band_v,
4168 sizeof(u64),
4169 PCI_DMA_TODEVICE);
4170 if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
4171 goto pci_map_failed;
4172 txdp++;
4173 }
4174
4175 txdp->Buffer_Pointer = pci_map_single(sp->pdev, skb->data,
4176 frg_len, PCI_DMA_TODEVICE);
4177 if (pci_dma_mapping_error(sp->pdev, txdp->Buffer_Pointer))
4178 goto pci_map_failed;
4179
4180 txdp->Host_Control = (unsigned long)skb;
4181 txdp->Control_1 |= TXD_BUFFER0_SIZE(frg_len);
4182 if (offload_type == SKB_GSO_UDP)
4183 txdp->Control_1 |= TXD_UFO_EN;
4184
4185 frg_cnt = skb_shinfo(skb)->nr_frags;
4186 /* For fragmented SKB. */
4187 for (i = 0; i < frg_cnt; i++) {
4188 const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
4189 /* A '0' length fragment will be ignored */
4190 if (!skb_frag_size(frag))
4191 continue;
4192 txdp++;
4193 txdp->Buffer_Pointer = (u64)skb_frag_dma_map(&sp->pdev->dev,
4194 frag, 0,
4195 skb_frag_size(frag),
4196 DMA_TO_DEVICE);
4197 txdp->Control_1 = TXD_BUFFER0_SIZE(skb_frag_size(frag));
4198 if (offload_type == SKB_GSO_UDP)
4199 txdp->Control_1 |= TXD_UFO_EN;
4200 }
4201 txdp->Control_1 |= TXD_GATHER_CODE_LAST;
4202
4203 if (offload_type == SKB_GSO_UDP)
4204 frg_cnt++; /* as Txd0 was used for inband header */
4205
4206 tx_fifo = mac_control->tx_FIFO_start[queue];
4207 val64 = fifo->list_info[put_off].list_phy_addr;
4208 writeq(val64, &tx_fifo->TxDL_Pointer);
4209
4210 val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
4211 TX_FIFO_LAST_LIST);
4212 if (offload_type)
4213 val64 |= TX_FIFO_SPECIAL_FUNC;
4214
4215 writeq(val64, &tx_fifo->List_Control);
4216
4217 mmiowb();
4218
4219 put_off++;
4220 if (put_off == fifo->tx_curr_put_info.fifo_len + 1)
4221 put_off = 0;
4222 fifo->tx_curr_put_info.offset = put_off;
4223
4224 /* Avoid "put" pointer going beyond "get" pointer */
4225 if (((put_off+1) == queue_len ? 0 : (put_off+1)) == get_off) {
4226 swstats->fifo_full_cnt++;
4227 DBG_PRINT(TX_DBG,
4228 "No free TxDs for xmit, Put: 0x%x Get:0x%x\n",
4229 put_off, get_off);
4230 s2io_stop_tx_queue(sp, fifo->fifo_no);
4231 }
4232 swstats->mem_allocated += skb->truesize;
4233 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4234
4235 if (sp->config.intr_type == MSI_X)
4236 tx_intr_handler(fifo);
4237
4238 return NETDEV_TX_OK;
4239
4240 pci_map_failed:
4241 swstats->pci_map_fail_cnt++;
4242 s2io_stop_tx_queue(sp, fifo->fifo_no);
4243 swstats->mem_freed += skb->truesize;
4244 dev_kfree_skb(skb);
4245 spin_unlock_irqrestore(&fifo->tx_lock, flags);
4246 return NETDEV_TX_OK;
4247 }
4248
4249 static void
4250 s2io_alarm_handle(unsigned long data)
4251 {
4252 struct s2io_nic *sp = (struct s2io_nic *)data;
4253 struct net_device *dev = sp->dev;
4254
4255 s2io_handle_errors(dev);
4256 mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
4257 }
4258
4259 static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
4260 {
4261 struct ring_info *ring = (struct ring_info *)dev_id;
4262 struct s2io_nic *sp = ring->nic;
4263 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4264
4265 if (unlikely(!is_s2io_card_up(sp)))
4266 return IRQ_HANDLED;
4267
4268 if (sp->config.napi) {
4269 u8 __iomem *addr = NULL;
4270 u8 val8 = 0;
4271
4272 addr = (u8 __iomem *)&bar0->xmsi_mask_reg;
4273 addr += (7 - ring->ring_no);
4274 val8 = (ring->ring_no == 0) ? 0x7f : 0xff;
4275 writeb(val8, addr);
4276 val8 = readb(addr);
4277 napi_schedule(&ring->napi);
4278 } else {
4279 rx_intr_handler(ring, 0);
4280 s2io_chk_rx_buffers(sp, ring);
4281 }
4282
4283 return IRQ_HANDLED;
4284 }
4285
4286 static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
4287 {
4288 int i;
4289 struct fifo_info *fifos = (struct fifo_info *)dev_id;
4290 struct s2io_nic *sp = fifos->nic;
4291 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4292 struct config_param *config = &sp->config;
4293 u64 reason;
4294
4295 if (unlikely(!is_s2io_card_up(sp)))
4296 return IRQ_NONE;
4297
4298 reason = readq(&bar0->general_int_status);
4299 if (unlikely(reason == S2IO_MINUS_ONE))
4300 /* Nothing much can be done. Get out */
4301 return IRQ_HANDLED;
4302
4303 if (reason & (GEN_INTR_TXPIC | GEN_INTR_TXTRAFFIC)) {
4304 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4305
4306 if (reason & GEN_INTR_TXPIC)
4307 s2io_txpic_intr_handle(sp);
4308
4309 if (reason & GEN_INTR_TXTRAFFIC)
4310 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4311
4312 for (i = 0; i < config->tx_fifo_num; i++)
4313 tx_intr_handler(&fifos[i]);
4314
4315 writeq(sp->general_int_mask, &bar0->general_int_mask);
4316 readl(&bar0->general_int_status);
4317 return IRQ_HANDLED;
4318 }
4319 /* The interrupt was not raised by us */
4320 return IRQ_NONE;
4321 }
4322
4323 static void s2io_txpic_intr_handle(struct s2io_nic *sp)
4324 {
4325 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4326 u64 val64;
4327
4328 val64 = readq(&bar0->pic_int_status);
4329 if (val64 & PIC_INT_GPIO) {
4330 val64 = readq(&bar0->gpio_int_reg);
4331 if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
4332 (val64 & GPIO_INT_REG_LINK_UP)) {
4333 /*
4334 * This is unstable state so clear both up/down
4335 * interrupt and adapter to re-evaluate the link state.
4336 */
4337 val64 |= GPIO_INT_REG_LINK_DOWN;
4338 val64 |= GPIO_INT_REG_LINK_UP;
4339 writeq(val64, &bar0->gpio_int_reg);
4340 val64 = readq(&bar0->gpio_int_mask);
4341 val64 &= ~(GPIO_INT_MASK_LINK_UP |
4342 GPIO_INT_MASK_LINK_DOWN);
4343 writeq(val64, &bar0->gpio_int_mask);
4344 } else if (val64 & GPIO_INT_REG_LINK_UP) {
4345 val64 = readq(&bar0->adapter_status);
4346 /* Enable Adapter */
4347 val64 = readq(&bar0->adapter_control);
4348 val64 |= ADAPTER_CNTL_EN;
4349 writeq(val64, &bar0->adapter_control);
4350 val64 |= ADAPTER_LED_ON;
4351 writeq(val64, &bar0->adapter_control);
4352 if (!sp->device_enabled_once)
4353 sp->device_enabled_once = 1;
4354
4355 s2io_link(sp, LINK_UP);
4356 /*
4357 * unmask link down interrupt and mask link-up
4358 * intr
4359 */
4360 val64 = readq(&bar0->gpio_int_mask);
4361 val64 &= ~GPIO_INT_MASK_LINK_DOWN;
4362 val64 |= GPIO_INT_MASK_LINK_UP;
4363 writeq(val64, &bar0->gpio_int_mask);
4364
4365 } else if (val64 & GPIO_INT_REG_LINK_DOWN) {
4366 val64 = readq(&bar0->adapter_status);
4367 s2io_link(sp, LINK_DOWN);
4368 /* Link is down so unmaks link up interrupt */
4369 val64 = readq(&bar0->gpio_int_mask);
4370 val64 &= ~GPIO_INT_MASK_LINK_UP;
4371 val64 |= GPIO_INT_MASK_LINK_DOWN;
4372 writeq(val64, &bar0->gpio_int_mask);
4373
4374 /* turn off LED */
4375 val64 = readq(&bar0->adapter_control);
4376 val64 = val64 & (~ADAPTER_LED_ON);
4377 writeq(val64, &bar0->adapter_control);
4378 }
4379 }
4380 val64 = readq(&bar0->gpio_int_mask);
4381 }
4382
4383 /**
4384 * do_s2io_chk_alarm_bit - Check for alarm and incrment the counter
4385 * @value: alarm bits
4386 * @addr: address value
4387 * @cnt: counter variable
4388 * Description: Check for alarm and increment the counter
4389 * Return Value:
4390 * 1 - if alarm bit set
4391 * 0 - if alarm bit is not set
4392 */
4393 static int do_s2io_chk_alarm_bit(u64 value, void __iomem *addr,
4394 unsigned long long *cnt)
4395 {
4396 u64 val64;
4397 val64 = readq(addr);
4398 if (val64 & value) {
4399 writeq(val64, addr);
4400 (*cnt)++;
4401 return 1;
4402 }
4403 return 0;
4404
4405 }
4406
4407 /**
4408 * s2io_handle_errors - Xframe error indication handler
4409 * @nic: device private variable
4410 * Description: Handle alarms such as loss of link, single or
4411 * double ECC errors, critical and serious errors.
4412 * Return Value:
4413 * NONE
4414 */
4415 static void s2io_handle_errors(void *dev_id)
4416 {
4417 struct net_device *dev = (struct net_device *)dev_id;
4418 struct s2io_nic *sp = netdev_priv(dev);
4419 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4420 u64 temp64 = 0, val64 = 0;
4421 int i = 0;
4422
4423 struct swStat *sw_stat = &sp->mac_control.stats_info->sw_stat;
4424 struct xpakStat *stats = &sp->mac_control.stats_info->xpak_stat;
4425
4426 if (!is_s2io_card_up(sp))
4427 return;
4428
4429 if (pci_channel_offline(sp->pdev))
4430 return;
4431
4432 memset(&sw_stat->ring_full_cnt, 0,
4433 sizeof(sw_stat->ring_full_cnt));
4434
4435 /* Handling the XPAK counters update */
4436 if (stats->xpak_timer_count < 72000) {
4437 /* waiting for an hour */
4438 stats->xpak_timer_count++;
4439 } else {
4440 s2io_updt_xpak_counter(dev);
4441 /* reset the count to zero */
4442 stats->xpak_timer_count = 0;
4443 }
4444
4445 /* Handling link status change error Intr */
4446 if (s2io_link_fault_indication(sp) == MAC_RMAC_ERR_TIMER) {
4447 val64 = readq(&bar0->mac_rmac_err_reg);
4448 writeq(val64, &bar0->mac_rmac_err_reg);
4449 if (val64 & RMAC_LINK_STATE_CHANGE_INT)
4450 schedule_work(&sp->set_link_task);
4451 }
4452
4453 /* In case of a serious error, the device will be Reset. */
4454 if (do_s2io_chk_alarm_bit(SERR_SOURCE_ANY, &bar0->serr_source,
4455 &sw_stat->serious_err_cnt))
4456 goto reset;
4457
4458 /* Check for data parity error */
4459 if (do_s2io_chk_alarm_bit(GPIO_INT_REG_DP_ERR_INT, &bar0->gpio_int_reg,
4460 &sw_stat->parity_err_cnt))
4461 goto reset;
4462
4463 /* Check for ring full counter */
4464 if (sp->device_type == XFRAME_II_DEVICE) {
4465 val64 = readq(&bar0->ring_bump_counter1);
4466 for (i = 0; i < 4; i++) {
4467 temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
4468 temp64 >>= 64 - ((i+1)*16);
4469 sw_stat->ring_full_cnt[i] += temp64;
4470 }
4471
4472 val64 = readq(&bar0->ring_bump_counter2);
4473 for (i = 0; i < 4; i++) {
4474 temp64 = (val64 & vBIT(0xFFFF, (i*16), 16));
4475 temp64 >>= 64 - ((i+1)*16);
4476 sw_stat->ring_full_cnt[i+4] += temp64;
4477 }
4478 }
4479
4480 val64 = readq(&bar0->txdma_int_status);
4481 /*check for pfc_err*/
4482 if (val64 & TXDMA_PFC_INT) {
4483 if (do_s2io_chk_alarm_bit(PFC_ECC_DB_ERR | PFC_SM_ERR_ALARM |
4484 PFC_MISC_0_ERR | PFC_MISC_1_ERR |
4485 PFC_PCIX_ERR,
4486 &bar0->pfc_err_reg,
4487 &sw_stat->pfc_err_cnt))
4488 goto reset;
4489 do_s2io_chk_alarm_bit(PFC_ECC_SG_ERR,
4490 &bar0->pfc_err_reg,
4491 &sw_stat->pfc_err_cnt);
4492 }
4493
4494 /*check for tda_err*/
4495 if (val64 & TXDMA_TDA_INT) {
4496 if (do_s2io_chk_alarm_bit(TDA_Fn_ECC_DB_ERR |
4497 TDA_SM0_ERR_ALARM |
4498 TDA_SM1_ERR_ALARM,
4499 &bar0->tda_err_reg,
4500 &sw_stat->tda_err_cnt))
4501 goto reset;
4502 do_s2io_chk_alarm_bit(TDA_Fn_ECC_SG_ERR | TDA_PCIX_ERR,
4503 &bar0->tda_err_reg,
4504 &sw_stat->tda_err_cnt);
4505 }
4506 /*check for pcc_err*/
4507 if (val64 & TXDMA_PCC_INT) {
4508 if (do_s2io_chk_alarm_bit(PCC_SM_ERR_ALARM | PCC_WR_ERR_ALARM |
4509 PCC_N_SERR | PCC_6_COF_OV_ERR |
4510 PCC_7_COF_OV_ERR | PCC_6_LSO_OV_ERR |
4511 PCC_7_LSO_OV_ERR | PCC_FB_ECC_DB_ERR |
4512 PCC_TXB_ECC_DB_ERR,
4513 &bar0->pcc_err_reg,
4514 &sw_stat->pcc_err_cnt))
4515 goto reset;
4516 do_s2io_chk_alarm_bit(PCC_FB_ECC_SG_ERR | PCC_TXB_ECC_SG_ERR,
4517 &bar0->pcc_err_reg,
4518 &sw_stat->pcc_err_cnt);
4519 }
4520
4521 /*check for tti_err*/
4522 if (val64 & TXDMA_TTI_INT) {
4523 if (do_s2io_chk_alarm_bit(TTI_SM_ERR_ALARM,
4524 &bar0->tti_err_reg,
4525 &sw_stat->tti_err_cnt))
4526 goto reset;
4527 do_s2io_chk_alarm_bit(TTI_ECC_SG_ERR | TTI_ECC_DB_ERR,
4528 &bar0->tti_err_reg,
4529 &sw_stat->tti_err_cnt);
4530 }
4531
4532 /*check for lso_err*/
4533 if (val64 & TXDMA_LSO_INT) {
4534 if (do_s2io_chk_alarm_bit(LSO6_ABORT | LSO7_ABORT |
4535 LSO6_SM_ERR_ALARM | LSO7_SM_ERR_ALARM,
4536 &bar0->lso_err_reg,
4537 &sw_stat->lso_err_cnt))
4538 goto reset;
4539 do_s2io_chk_alarm_bit(LSO6_SEND_OFLOW | LSO7_SEND_OFLOW,
4540 &bar0->lso_err_reg,
4541 &sw_stat->lso_err_cnt);
4542 }
4543
4544 /*check for tpa_err*/
4545 if (val64 & TXDMA_TPA_INT) {
4546 if (do_s2io_chk_alarm_bit(TPA_SM_ERR_ALARM,
4547 &bar0->tpa_err_reg,
4548 &sw_stat->tpa_err_cnt))
4549 goto reset;
4550 do_s2io_chk_alarm_bit(TPA_TX_FRM_DROP,
4551 &bar0->tpa_err_reg,
4552 &sw_stat->tpa_err_cnt);
4553 }
4554
4555 /*check for sm_err*/
4556 if (val64 & TXDMA_SM_INT) {
4557 if (do_s2io_chk_alarm_bit(SM_SM_ERR_ALARM,
4558 &bar0->sm_err_reg,
4559 &sw_stat->sm_err_cnt))
4560 goto reset;
4561 }
4562
4563 val64 = readq(&bar0->mac_int_status);
4564 if (val64 & MAC_INT_STATUS_TMAC_INT) {
4565 if (do_s2io_chk_alarm_bit(TMAC_TX_BUF_OVRN | TMAC_TX_SM_ERR,
4566 &bar0->mac_tmac_err_reg,
4567 &sw_stat->mac_tmac_err_cnt))
4568 goto reset;
4569 do_s2io_chk_alarm_bit(TMAC_ECC_SG_ERR | TMAC_ECC_DB_ERR |
4570 TMAC_DESC_ECC_SG_ERR |
4571 TMAC_DESC_ECC_DB_ERR,
4572 &bar0->mac_tmac_err_reg,
4573 &sw_stat->mac_tmac_err_cnt);
4574 }
4575
4576 val64 = readq(&bar0->xgxs_int_status);
4577 if (val64 & XGXS_INT_STATUS_TXGXS) {
4578 if (do_s2io_chk_alarm_bit(TXGXS_ESTORE_UFLOW | TXGXS_TX_SM_ERR,
4579 &bar0->xgxs_txgxs_err_reg,
4580 &sw_stat->xgxs_txgxs_err_cnt))
4581 goto reset;
4582 do_s2io_chk_alarm_bit(TXGXS_ECC_SG_ERR | TXGXS_ECC_DB_ERR,
4583 &bar0->xgxs_txgxs_err_reg,
4584 &sw_stat->xgxs_txgxs_err_cnt);
4585 }
4586
4587 val64 = readq(&bar0->rxdma_int_status);
4588 if (val64 & RXDMA_INT_RC_INT_M) {
4589 if (do_s2io_chk_alarm_bit(RC_PRCn_ECC_DB_ERR |
4590 RC_FTC_ECC_DB_ERR |
4591 RC_PRCn_SM_ERR_ALARM |
4592 RC_FTC_SM_ERR_ALARM,
4593 &bar0->rc_err_reg,
4594 &sw_stat->rc_err_cnt))
4595 goto reset;
4596 do_s2io_chk_alarm_bit(RC_PRCn_ECC_SG_ERR |
4597 RC_FTC_ECC_SG_ERR |
4598 RC_RDA_FAIL_WR_Rn, &bar0->rc_err_reg,
4599 &sw_stat->rc_err_cnt);
4600 if (do_s2io_chk_alarm_bit(PRC_PCI_AB_RD_Rn |
4601 PRC_PCI_AB_WR_Rn |
4602 PRC_PCI_AB_F_WR_Rn,
4603 &bar0->prc_pcix_err_reg,
4604 &sw_stat->prc_pcix_err_cnt))
4605 goto reset;
4606 do_s2io_chk_alarm_bit(PRC_PCI_DP_RD_Rn |
4607 PRC_PCI_DP_WR_Rn |
4608 PRC_PCI_DP_F_WR_Rn,
4609 &bar0->prc_pcix_err_reg,
4610 &sw_stat->prc_pcix_err_cnt);
4611 }
4612
4613 if (val64 & RXDMA_INT_RPA_INT_M) {
4614 if (do_s2io_chk_alarm_bit(RPA_SM_ERR_ALARM | RPA_CREDIT_ERR,
4615 &bar0->rpa_err_reg,
4616 &sw_stat->rpa_err_cnt))
4617 goto reset;
4618 do_s2io_chk_alarm_bit(RPA_ECC_SG_ERR | RPA_ECC_DB_ERR,
4619 &bar0->rpa_err_reg,
4620 &sw_stat->rpa_err_cnt);
4621 }
4622
4623 if (val64 & RXDMA_INT_RDA_INT_M) {
4624 if (do_s2io_chk_alarm_bit(RDA_RXDn_ECC_DB_ERR |
4625 RDA_FRM_ECC_DB_N_AERR |
4626 RDA_SM1_ERR_ALARM |
4627 RDA_SM0_ERR_ALARM |
4628 RDA_RXD_ECC_DB_SERR,
4629 &bar0->rda_err_reg,
4630 &sw_stat->rda_err_cnt))
4631 goto reset;
4632 do_s2io_chk_alarm_bit(RDA_RXDn_ECC_SG_ERR |
4633 RDA_FRM_ECC_SG_ERR |
4634 RDA_MISC_ERR |
4635 RDA_PCIX_ERR,
4636 &bar0->rda_err_reg,
4637 &sw_stat->rda_err_cnt);
4638 }
4639
4640 if (val64 & RXDMA_INT_RTI_INT_M) {
4641 if (do_s2io_chk_alarm_bit(RTI_SM_ERR_ALARM,
4642 &bar0->rti_err_reg,
4643 &sw_stat->rti_err_cnt))
4644 goto reset;
4645 do_s2io_chk_alarm_bit(RTI_ECC_SG_ERR | RTI_ECC_DB_ERR,
4646 &bar0->rti_err_reg,
4647 &sw_stat->rti_err_cnt);
4648 }
4649
4650 val64 = readq(&bar0->mac_int_status);
4651 if (val64 & MAC_INT_STATUS_RMAC_INT) {
4652 if (do_s2io_chk_alarm_bit(RMAC_RX_BUFF_OVRN | RMAC_RX_SM_ERR,
4653 &bar0->mac_rmac_err_reg,
4654 &sw_stat->mac_rmac_err_cnt))
4655 goto reset;
4656 do_s2io_chk_alarm_bit(RMAC_UNUSED_INT |
4657 RMAC_SINGLE_ECC_ERR |
4658 RMAC_DOUBLE_ECC_ERR,
4659 &bar0->mac_rmac_err_reg,
4660 &sw_stat->mac_rmac_err_cnt);
4661 }
4662
4663 val64 = readq(&bar0->xgxs_int_status);
4664 if (val64 & XGXS_INT_STATUS_RXGXS) {
4665 if (do_s2io_chk_alarm_bit(RXGXS_ESTORE_OFLOW | RXGXS_RX_SM_ERR,
4666 &bar0->xgxs_rxgxs_err_reg,
4667 &sw_stat->xgxs_rxgxs_err_cnt))
4668 goto reset;
4669 }
4670
4671 val64 = readq(&bar0->mc_int_status);
4672 if (val64 & MC_INT_STATUS_MC_INT) {
4673 if (do_s2io_chk_alarm_bit(MC_ERR_REG_SM_ERR,
4674 &bar0->mc_err_reg,
4675 &sw_stat->mc_err_cnt))
4676 goto reset;
4677
4678 /* Handling Ecc errors */
4679 if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
4680 writeq(val64, &bar0->mc_err_reg);
4681 if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
4682 sw_stat->double_ecc_errs++;
4683 if (sp->device_type != XFRAME_II_DEVICE) {
4684 /*
4685 * Reset XframeI only if critical error
4686 */
4687 if (val64 &
4688 (MC_ERR_REG_MIRI_ECC_DB_ERR_0 |
4689 MC_ERR_REG_MIRI_ECC_DB_ERR_1))
4690 goto reset;
4691 }
4692 } else
4693 sw_stat->single_ecc_errs++;
4694 }
4695 }
4696 return;
4697
4698 reset:
4699 s2io_stop_all_tx_queue(sp);
4700 schedule_work(&sp->rst_timer_task);
4701 sw_stat->soft_reset_cnt++;
4702 }
4703
4704 /**
4705 * s2io_isr - ISR handler of the device .
4706 * @irq: the irq of the device.
4707 * @dev_id: a void pointer to the dev structure of the NIC.
4708 * Description: This function is the ISR handler of the device. It
4709 * identifies the reason for the interrupt and calls the relevant
4710 * service routines. As a contongency measure, this ISR allocates the
4711 * recv buffers, if their numbers are below the panic value which is
4712 * presently set to 25% of the original number of rcv buffers allocated.
4713 * Return value:
4714 * IRQ_HANDLED: will be returned if IRQ was handled by this routine
4715 * IRQ_NONE: will be returned if interrupt is not from our device
4716 */
4717 static irqreturn_t s2io_isr(int irq, void *dev_id)
4718 {
4719 struct net_device *dev = (struct net_device *)dev_id;
4720 struct s2io_nic *sp = netdev_priv(dev);
4721 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4722 int i;
4723 u64 reason = 0;
4724 struct mac_info *mac_control;
4725 struct config_param *config;
4726
4727 /* Pretend we handled any irq's from a disconnected card */
4728 if (pci_channel_offline(sp->pdev))
4729 return IRQ_NONE;
4730
4731 if (!is_s2io_card_up(sp))
4732 return IRQ_NONE;
4733
4734 config = &sp->config;
4735 mac_control = &sp->mac_control;
4736
4737 /*
4738 * Identify the cause for interrupt and call the appropriate
4739 * interrupt handler. Causes for the interrupt could be;
4740 * 1. Rx of packet.
4741 * 2. Tx complete.
4742 * 3. Link down.
4743 */
4744 reason = readq(&bar0->general_int_status);
4745
4746 if (unlikely(reason == S2IO_MINUS_ONE))
4747 return IRQ_HANDLED; /* Nothing much can be done. Get out */
4748
4749 if (reason &
4750 (GEN_INTR_RXTRAFFIC | GEN_INTR_TXTRAFFIC | GEN_INTR_TXPIC)) {
4751 writeq(S2IO_MINUS_ONE, &bar0->general_int_mask);
4752
4753 if (config->napi) {
4754 if (reason & GEN_INTR_RXTRAFFIC) {
4755 napi_schedule(&sp->napi);
4756 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
4757 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4758 readl(&bar0->rx_traffic_int);
4759 }
4760 } else {
4761 /*
4762 * rx_traffic_int reg is an R1 register, writing all 1's
4763 * will ensure that the actual interrupt causing bit
4764 * get's cleared and hence a read can be avoided.
4765 */
4766 if (reason & GEN_INTR_RXTRAFFIC)
4767 writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
4768
4769 for (i = 0; i < config->rx_ring_num; i++) {
4770 struct ring_info *ring = &mac_control->rings[i];
4771
4772 rx_intr_handler(ring, 0);
4773 }
4774 }
4775
4776 /*
4777 * tx_traffic_int reg is an R1 register, writing all 1's
4778 * will ensure that the actual interrupt causing bit get's
4779 * cleared and hence a read can be avoided.
4780 */
4781 if (reason & GEN_INTR_TXTRAFFIC)
4782 writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
4783
4784 for (i = 0; i < config->tx_fifo_num; i++)
4785 tx_intr_handler(&mac_control->fifos[i]);
4786
4787 if (reason & GEN_INTR_TXPIC)
4788 s2io_txpic_intr_handle(sp);
4789
4790 /*
4791 * Reallocate the buffers from the interrupt handler itself.
4792 */
4793 if (!config->napi) {
4794 for (i = 0; i < config->rx_ring_num; i++) {
4795 struct ring_info *ring = &mac_control->rings[i];
4796
4797 s2io_chk_rx_buffers(sp, ring);
4798 }
4799 }
4800 writeq(sp->general_int_mask, &bar0->general_int_mask);
4801 readl(&bar0->general_int_status);
4802
4803 return IRQ_HANDLED;
4804
4805 } else if (!reason) {
4806 /* The interrupt was not raised by us */
4807 return IRQ_NONE;
4808 }
4809
4810 return IRQ_HANDLED;
4811 }
4812
4813 /**
4814 * s2io_updt_stats -
4815 */
4816 static void s2io_updt_stats(struct s2io_nic *sp)
4817 {
4818 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4819 u64 val64;
4820 int cnt = 0;
4821
4822 if (is_s2io_card_up(sp)) {
4823 /* Apprx 30us on a 133 MHz bus */
4824 val64 = SET_UPDT_CLICKS(10) |
4825 STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
4826 writeq(val64, &bar0->stat_cfg);
4827 do {
4828 udelay(100);
4829 val64 = readq(&bar0->stat_cfg);
4830 if (!(val64 & s2BIT(0)))
4831 break;
4832 cnt++;
4833 if (cnt == 5)
4834 break; /* Updt failed */
4835 } while (1);
4836 }
4837 }
4838
4839 /**
4840 * s2io_get_stats - Updates the device statistics structure.
4841 * @dev : pointer to the device structure.
4842 * Description:
4843 * This function updates the device statistics structure in the s2io_nic
4844 * structure and returns a pointer to the same.
4845 * Return value:
4846 * pointer to the updated net_device_stats structure.
4847 */
4848 static struct net_device_stats *s2io_get_stats(struct net_device *dev)
4849 {
4850 struct s2io_nic *sp = netdev_priv(dev);
4851 struct mac_info *mac_control = &sp->mac_control;
4852 struct stat_block *stats = mac_control->stats_info;
4853 u64 delta;
4854
4855 /* Configure Stats for immediate updt */
4856 s2io_updt_stats(sp);
4857
4858 /* A device reset will cause the on-adapter statistics to be zero'ed.
4859 * This can be done while running by changing the MTU. To prevent the
4860 * system from having the stats zero'ed, the driver keeps a copy of the
4861 * last update to the system (which is also zero'ed on reset). This
4862 * enables the driver to accurately know the delta between the last
4863 * update and the current update.
4864 */
4865 delta = ((u64) le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 |
4866 le32_to_cpu(stats->rmac_vld_frms)) - sp->stats.rx_packets;
4867 sp->stats.rx_packets += delta;
4868 dev->stats.rx_packets += delta;
4869
4870 delta = ((u64) le32_to_cpu(stats->tmac_frms_oflow) << 32 |
4871 le32_to_cpu(stats->tmac_frms)) - sp->stats.tx_packets;
4872 sp->stats.tx_packets += delta;
4873 dev->stats.tx_packets += delta;
4874
4875 delta = ((u64) le32_to_cpu(stats->rmac_data_octets_oflow) << 32 |
4876 le32_to_cpu(stats->rmac_data_octets)) - sp->stats.rx_bytes;
4877 sp->stats.rx_bytes += delta;
4878 dev->stats.rx_bytes += delta;
4879
4880 delta = ((u64) le32_to_cpu(stats->tmac_data_octets_oflow) << 32 |
4881 le32_to_cpu(stats->tmac_data_octets)) - sp->stats.tx_bytes;
4882 sp->stats.tx_bytes += delta;
4883 dev->stats.tx_bytes += delta;
4884
4885 delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_errors;
4886 sp->stats.rx_errors += delta;
4887 dev->stats.rx_errors += delta;
4888
4889 delta = ((u64) le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 |
4890 le32_to_cpu(stats->tmac_any_err_frms)) - sp->stats.tx_errors;
4891 sp->stats.tx_errors += delta;
4892 dev->stats.tx_errors += delta;
4893
4894 delta = le64_to_cpu(stats->rmac_drop_frms) - sp->stats.rx_dropped;
4895 sp->stats.rx_dropped += delta;
4896 dev->stats.rx_dropped += delta;
4897
4898 delta = le64_to_cpu(stats->tmac_drop_frms) - sp->stats.tx_dropped;
4899 sp->stats.tx_dropped += delta;
4900 dev->stats.tx_dropped += delta;
4901
4902 /* The adapter MAC interprets pause frames as multicast packets, but
4903 * does not pass them up. This erroneously increases the multicast
4904 * packet count and needs to be deducted when the multicast frame count
4905 * is queried.
4906 */
4907 delta = (u64) le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 |
4908 le32_to_cpu(stats->rmac_vld_mcst_frms);
4909 delta -= le64_to_cpu(stats->rmac_pause_ctrl_frms);
4910 delta -= sp->stats.multicast;
4911 sp->stats.multicast += delta;
4912 dev->stats.multicast += delta;
4913
4914 delta = ((u64) le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 |
4915 le32_to_cpu(stats->rmac_usized_frms)) +
4916 le64_to_cpu(stats->rmac_long_frms) - sp->stats.rx_length_errors;
4917 sp->stats.rx_length_errors += delta;
4918 dev->stats.rx_length_errors += delta;
4919
4920 delta = le64_to_cpu(stats->rmac_fcs_err_frms) - sp->stats.rx_crc_errors;
4921 sp->stats.rx_crc_errors += delta;
4922 dev->stats.rx_crc_errors += delta;
4923
4924 return &dev->stats;
4925 }
4926
4927 /**
4928 * s2io_set_multicast - entry point for multicast address enable/disable.
4929 * @dev : pointer to the device structure
4930 * Description:
4931 * This function is a driver entry point which gets called by the kernel
4932 * whenever multicast addresses must be enabled/disabled. This also gets
4933 * called to set/reset promiscuous mode. Depending on the deivce flag, we
4934 * determine, if multicast address must be enabled or if promiscuous mode
4935 * is to be disabled etc.
4936 * Return value:
4937 * void.
4938 */
4939
4940 static void s2io_set_multicast(struct net_device *dev)
4941 {
4942 int i, j, prev_cnt;
4943 struct netdev_hw_addr *ha;
4944 struct s2io_nic *sp = netdev_priv(dev);
4945 struct XENA_dev_config __iomem *bar0 = sp->bar0;
4946 u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
4947 0xfeffffffffffULL;
4948 u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, mac_addr = 0;
4949 void __iomem *add;
4950 struct config_param *config = &sp->config;
4951
4952 if ((dev->flags & IFF_ALLMULTI) && (!sp->m_cast_flg)) {
4953 /* Enable all Multicast addresses */
4954 writeq(RMAC_ADDR_DATA0_MEM_ADDR(multi_mac),
4955 &bar0->rmac_addr_data0_mem);
4956 writeq(RMAC_ADDR_DATA1_MEM_MASK(mask),
4957 &bar0->rmac_addr_data1_mem);
4958 val64 = RMAC_ADDR_CMD_MEM_WE |
4959 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4960 RMAC_ADDR_CMD_MEM_OFFSET(config->max_mc_addr - 1);
4961 writeq(val64, &bar0->rmac_addr_cmd_mem);
4962 /* Wait till command completes */
4963 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4964 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4965 S2IO_BIT_RESET);
4966
4967 sp->m_cast_flg = 1;
4968 sp->all_multi_pos = config->max_mc_addr - 1;
4969 } else if ((dev->flags & IFF_ALLMULTI) && (sp->m_cast_flg)) {
4970 /* Disable all Multicast addresses */
4971 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
4972 &bar0->rmac_addr_data0_mem);
4973 writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
4974 &bar0->rmac_addr_data1_mem);
4975 val64 = RMAC_ADDR_CMD_MEM_WE |
4976 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
4977 RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
4978 writeq(val64, &bar0->rmac_addr_cmd_mem);
4979 /* Wait till command completes */
4980 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
4981 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
4982 S2IO_BIT_RESET);
4983
4984 sp->m_cast_flg = 0;
4985 sp->all_multi_pos = 0;
4986 }
4987
4988 if ((dev->flags & IFF_PROMISC) && (!sp->promisc_flg)) {
4989 /* Put the NIC into promiscuous mode */
4990 add = &bar0->mac_cfg;
4991 val64 = readq(&bar0->mac_cfg);
4992 val64 |= MAC_CFG_RMAC_PROM_ENABLE;
4993
4994 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4995 writel((u32)val64, add);
4996 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
4997 writel((u32) (val64 >> 32), (add + 4));
4998
4999 if (vlan_tag_strip != 1) {
5000 val64 = readq(&bar0->rx_pa_cfg);
5001 val64 &= ~RX_PA_CFG_STRIP_VLAN_TAG;
5002 writeq(val64, &bar0->rx_pa_cfg);
5003 sp->vlan_strip_flag = 0;
5004 }
5005
5006 val64 = readq(&bar0->mac_cfg);
5007 sp->promisc_flg = 1;
5008 DBG_PRINT(INFO_DBG, "%s: entered promiscuous mode\n",
5009 dev->name);
5010 } else if (!(dev->flags & IFF_PROMISC) && (sp->promisc_flg)) {
5011 /* Remove the NIC from promiscuous mode */
5012 add = &bar0->mac_cfg;
5013 val64 = readq(&bar0->mac_cfg);
5014 val64 &= ~MAC_CFG_RMAC_PROM_ENABLE;
5015
5016 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5017 writel((u32)val64, add);
5018 writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
5019 writel((u32) (val64 >> 32), (add + 4));
5020
5021 if (vlan_tag_strip != 0) {
5022 val64 = readq(&bar0->rx_pa_cfg);
5023 val64 |= RX_PA_CFG_STRIP_VLAN_TAG;
5024 writeq(val64, &bar0->rx_pa_cfg);
5025 sp->vlan_strip_flag = 1;
5026 }
5027
5028 val64 = readq(&bar0->mac_cfg);
5029 sp->promisc_flg = 0;
5030 DBG_PRINT(INFO_DBG, "%s: left promiscuous mode\n", dev->name);
5031 }
5032
5033 /* Update individual M_CAST address list */
5034 if ((!sp->m_cast_flg) && netdev_mc_count(dev)) {
5035 if (netdev_mc_count(dev) >
5036 (config->max_mc_addr - config->max_mac_addr)) {
5037 DBG_PRINT(ERR_DBG,
5038 "%s: No more Rx filters can be added - "
5039 "please enable ALL_MULTI instead\n",
5040 dev->name);
5041 return;
5042 }
5043
5044 prev_cnt = sp->mc_addr_count;
5045 sp->mc_addr_count = netdev_mc_count(dev);
5046
5047 /* Clear out the previous list of Mc in the H/W. */
5048 for (i = 0; i < prev_cnt; i++) {
5049 writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
5050 &bar0->rmac_addr_data0_mem);
5051 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5052 &bar0->rmac_addr_data1_mem);
5053 val64 = RMAC_ADDR_CMD_MEM_WE |
5054 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5055 RMAC_ADDR_CMD_MEM_OFFSET
5056 (config->mc_start_offset + i);
5057 writeq(val64, &bar0->rmac_addr_cmd_mem);
5058
5059 /* Wait for command completes */
5060 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5061 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5062 S2IO_BIT_RESET)) {
5063 DBG_PRINT(ERR_DBG,
5064 "%s: Adding Multicasts failed\n",
5065 dev->name);
5066 return;
5067 }
5068 }
5069
5070 /* Create the new Rx filter list and update the same in H/W. */
5071 i = 0;
5072 netdev_for_each_mc_addr(ha, dev) {
5073 mac_addr = 0;
5074 for (j = 0; j < ETH_ALEN; j++) {
5075 mac_addr |= ha->addr[j];
5076 mac_addr <<= 8;
5077 }
5078 mac_addr >>= 8;
5079 writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
5080 &bar0->rmac_addr_data0_mem);
5081 writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
5082 &bar0->rmac_addr_data1_mem);
5083 val64 = RMAC_ADDR_CMD_MEM_WE |
5084 RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5085 RMAC_ADDR_CMD_MEM_OFFSET
5086 (i + config->mc_start_offset);
5087 writeq(val64, &bar0->rmac_addr_cmd_mem);
5088
5089 /* Wait for command completes */
5090 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5091 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5092 S2IO_BIT_RESET)) {
5093 DBG_PRINT(ERR_DBG,
5094 "%s: Adding Multicasts failed\n",
5095 dev->name);
5096 return;
5097 }
5098 i++;
5099 }
5100 }
5101 }
5102
5103 /* read from CAM unicast & multicast addresses and store it in
5104 * def_mac_addr structure
5105 */
5106 static void do_s2io_store_unicast_mc(struct s2io_nic *sp)
5107 {
5108 int offset;
5109 u64 mac_addr = 0x0;
5110 struct config_param *config = &sp->config;
5111
5112 /* store unicast & multicast mac addresses */
5113 for (offset = 0; offset < config->max_mc_addr; offset++) {
5114 mac_addr = do_s2io_read_unicast_mc(sp, offset);
5115 /* if read fails disable the entry */
5116 if (mac_addr == FAILURE)
5117 mac_addr = S2IO_DISABLE_MAC_ENTRY;
5118 do_s2io_copy_mac_addr(sp, offset, mac_addr);
5119 }
5120 }
5121
5122 /* restore unicast & multicast MAC to CAM from def_mac_addr structure */
5123 static void do_s2io_restore_unicast_mc(struct s2io_nic *sp)
5124 {
5125 int offset;
5126 struct config_param *config = &sp->config;
5127 /* restore unicast mac address */
5128 for (offset = 0; offset < config->max_mac_addr; offset++)
5129 do_s2io_prog_unicast(sp->dev,
5130 sp->def_mac_addr[offset].mac_addr);
5131
5132 /* restore multicast mac address */
5133 for (offset = config->mc_start_offset;
5134 offset < config->max_mc_addr; offset++)
5135 do_s2io_add_mc(sp, sp->def_mac_addr[offset].mac_addr);
5136 }
5137
5138 /* add a multicast MAC address to CAM */
5139 static int do_s2io_add_mc(struct s2io_nic *sp, u8 *addr)
5140 {
5141 int i;
5142 u64 mac_addr = 0;
5143 struct config_param *config = &sp->config;
5144
5145 for (i = 0; i < ETH_ALEN; i++) {
5146 mac_addr <<= 8;
5147 mac_addr |= addr[i];
5148 }
5149 if ((0ULL == mac_addr) || (mac_addr == S2IO_DISABLE_MAC_ENTRY))
5150 return SUCCESS;
5151
5152 /* check if the multicast mac already preset in CAM */
5153 for (i = config->mc_start_offset; i < config->max_mc_addr; i++) {
5154 u64 tmp64;
5155 tmp64 = do_s2io_read_unicast_mc(sp, i);
5156 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5157 break;
5158
5159 if (tmp64 == mac_addr)
5160 return SUCCESS;
5161 }
5162 if (i == config->max_mc_addr) {
5163 DBG_PRINT(ERR_DBG,
5164 "CAM full no space left for multicast MAC\n");
5165 return FAILURE;
5166 }
5167 /* Update the internal structure with this new mac address */
5168 do_s2io_copy_mac_addr(sp, i, mac_addr);
5169
5170 return do_s2io_add_mac(sp, mac_addr, i);
5171 }
5172
5173 /* add MAC address to CAM */
5174 static int do_s2io_add_mac(struct s2io_nic *sp, u64 addr, int off)
5175 {
5176 u64 val64;
5177 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5178
5179 writeq(RMAC_ADDR_DATA0_MEM_ADDR(addr),
5180 &bar0->rmac_addr_data0_mem);
5181
5182 val64 = RMAC_ADDR_CMD_MEM_WE | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5183 RMAC_ADDR_CMD_MEM_OFFSET(off);
5184 writeq(val64, &bar0->rmac_addr_cmd_mem);
5185
5186 /* Wait till command completes */
5187 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5188 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5189 S2IO_BIT_RESET)) {
5190 DBG_PRINT(INFO_DBG, "do_s2io_add_mac failed\n");
5191 return FAILURE;
5192 }
5193 return SUCCESS;
5194 }
5195 /* deletes a specified unicast/multicast mac entry from CAM */
5196 static int do_s2io_delete_unicast_mc(struct s2io_nic *sp, u64 addr)
5197 {
5198 int offset;
5199 u64 dis_addr = S2IO_DISABLE_MAC_ENTRY, tmp64;
5200 struct config_param *config = &sp->config;
5201
5202 for (offset = 1;
5203 offset < config->max_mc_addr; offset++) {
5204 tmp64 = do_s2io_read_unicast_mc(sp, offset);
5205 if (tmp64 == addr) {
5206 /* disable the entry by writing 0xffffffffffffULL */
5207 if (do_s2io_add_mac(sp, dis_addr, offset) == FAILURE)
5208 return FAILURE;
5209 /* store the new mac list from CAM */
5210 do_s2io_store_unicast_mc(sp);
5211 return SUCCESS;
5212 }
5213 }
5214 DBG_PRINT(ERR_DBG, "MAC address 0x%llx not found in CAM\n",
5215 (unsigned long long)addr);
5216 return FAILURE;
5217 }
5218
5219 /* read mac entries from CAM */
5220 static u64 do_s2io_read_unicast_mc(struct s2io_nic *sp, int offset)
5221 {
5222 u64 tmp64 = 0xffffffffffff0000ULL, val64;
5223 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5224
5225 /* read mac addr */
5226 val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
5227 RMAC_ADDR_CMD_MEM_OFFSET(offset);
5228 writeq(val64, &bar0->rmac_addr_cmd_mem);
5229
5230 /* Wait till command completes */
5231 if (wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
5232 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
5233 S2IO_BIT_RESET)) {
5234 DBG_PRINT(INFO_DBG, "do_s2io_read_unicast_mc failed\n");
5235 return FAILURE;
5236 }
5237 tmp64 = readq(&bar0->rmac_addr_data0_mem);
5238
5239 return tmp64 >> 16;
5240 }
5241
5242 /**
5243 * s2io_set_mac_addr driver entry point
5244 */
5245
5246 static int s2io_set_mac_addr(struct net_device *dev, void *p)
5247 {
5248 struct sockaddr *addr = p;
5249
5250 if (!is_valid_ether_addr(addr->sa_data))
5251 return -EINVAL;
5252
5253 memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
5254
5255 /* store the MAC address in CAM */
5256 return do_s2io_prog_unicast(dev, dev->dev_addr);
5257 }
5258 /**
5259 * do_s2io_prog_unicast - Programs the Xframe mac address
5260 * @dev : pointer to the device structure.
5261 * @addr: a uchar pointer to the new mac address which is to be set.
5262 * Description : This procedure will program the Xframe to receive
5263 * frames with new Mac Address
5264 * Return value: SUCCESS on success and an appropriate (-)ve integer
5265 * as defined in errno.h file on failure.
5266 */
5267
5268 static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr)
5269 {
5270 struct s2io_nic *sp = netdev_priv(dev);
5271 register u64 mac_addr = 0, perm_addr = 0;
5272 int i;
5273 u64 tmp64;
5274 struct config_param *config = &sp->config;
5275
5276 /*
5277 * Set the new MAC address as the new unicast filter and reflect this
5278 * change on the device address registered with the OS. It will be
5279 * at offset 0.
5280 */
5281 for (i = 0; i < ETH_ALEN; i++) {
5282 mac_addr <<= 8;
5283 mac_addr |= addr[i];
5284 perm_addr <<= 8;
5285 perm_addr |= sp->def_mac_addr[0].mac_addr[i];
5286 }
5287
5288 /* check if the dev_addr is different than perm_addr */
5289 if (mac_addr == perm_addr)
5290 return SUCCESS;
5291
5292 /* check if the mac already preset in CAM */
5293 for (i = 1; i < config->max_mac_addr; i++) {
5294 tmp64 = do_s2io_read_unicast_mc(sp, i);
5295 if (tmp64 == S2IO_DISABLE_MAC_ENTRY) /* CAM entry is empty */
5296 break;
5297
5298 if (tmp64 == mac_addr) {
5299 DBG_PRINT(INFO_DBG,
5300 "MAC addr:0x%llx already present in CAM\n",
5301 (unsigned long long)mac_addr);
5302 return SUCCESS;
5303 }
5304 }
5305 if (i == config->max_mac_addr) {
5306 DBG_PRINT(ERR_DBG, "CAM full no space left for Unicast MAC\n");
5307 return FAILURE;
5308 }
5309 /* Update the internal structure with this new mac address */
5310 do_s2io_copy_mac_addr(sp, i, mac_addr);
5311
5312 return do_s2io_add_mac(sp, mac_addr, i);
5313 }
5314
5315 /**
5316 * s2io_ethtool_sset - Sets different link parameters.
5317 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
5318 * @info: pointer to the structure with parameters given by ethtool to set
5319 * link information.
5320 * Description:
5321 * The function sets different link parameters provided by the user onto
5322 * the NIC.
5323 * Return value:
5324 * 0 on success.
5325 */
5326
5327 static int s2io_ethtool_sset(struct net_device *dev,
5328 struct ethtool_cmd *info)
5329 {
5330 struct s2io_nic *sp = netdev_priv(dev);
5331 if ((info->autoneg == AUTONEG_ENABLE) ||
5332 (ethtool_cmd_speed(info) != SPEED_10000) ||
5333 (info->duplex != DUPLEX_FULL))
5334 return -EINVAL;
5335 else {
5336 s2io_close(sp->dev);
5337 s2io_open(sp->dev);
5338 }
5339
5340 return 0;
5341 }
5342
5343 /**
5344 * s2io_ethtol_gset - Return link specific information.
5345 * @sp : private member of the device structure, pointer to the
5346 * s2io_nic structure.
5347 * @info : pointer to the structure with parameters given by ethtool
5348 * to return link information.
5349 * Description:
5350 * Returns link specific information like speed, duplex etc.. to ethtool.
5351 * Return value :
5352 * return 0 on success.
5353 */
5354
5355 static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
5356 {
5357 struct s2io_nic *sp = netdev_priv(dev);
5358 info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5359 info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
5360 info->port = PORT_FIBRE;
5361
5362 /* info->transceiver */
5363 info->transceiver = XCVR_EXTERNAL;
5364
5365 if (netif_carrier_ok(sp->dev)) {
5366 ethtool_cmd_speed_set(info, SPEED_10000);
5367 info->duplex = DUPLEX_FULL;
5368 } else {
5369 ethtool_cmd_speed_set(info, -1);
5370 info->duplex = -1;
5371 }
5372
5373 info->autoneg = AUTONEG_DISABLE;
5374 return 0;
5375 }
5376
5377 /**
5378 * s2io_ethtool_gdrvinfo - Returns driver specific information.
5379 * @sp : private member of the device structure, which is a pointer to the
5380 * s2io_nic structure.
5381 * @info : pointer to the structure with parameters given by ethtool to
5382 * return driver information.
5383 * Description:
5384 * Returns driver specefic information like name, version etc.. to ethtool.
5385 * Return value:
5386 * void
5387 */
5388
5389 static void s2io_ethtool_gdrvinfo(struct net_device *dev,
5390 struct ethtool_drvinfo *info)
5391 {
5392 struct s2io_nic *sp = netdev_priv(dev);
5393
5394 strlcpy(info->driver, s2io_driver_name, sizeof(info->driver));
5395 strlcpy(info->version, s2io_driver_version, sizeof(info->version));
5396 strlcpy(info->bus_info, pci_name(sp->pdev), sizeof(info->bus_info));
5397 info->regdump_len = XENA_REG_SPACE;
5398 info->eedump_len = XENA_EEPROM_SPACE;
5399 }
5400
5401 /**
5402 * s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
5403 * @sp: private member of the device structure, which is a pointer to the
5404 * s2io_nic structure.
5405 * @regs : pointer to the structure with parameters given by ethtool for
5406 * dumping the registers.
5407 * @reg_space: The input argumnet into which all the registers are dumped.
5408 * Description:
5409 * Dumps the entire register space of xFrame NIC into the user given
5410 * buffer area.
5411 * Return value :
5412 * void .
5413 */
5414
5415 static void s2io_ethtool_gregs(struct net_device *dev,
5416 struct ethtool_regs *regs, void *space)
5417 {
5418 int i;
5419 u64 reg;
5420 u8 *reg_space = (u8 *)space;
5421 struct s2io_nic *sp = netdev_priv(dev);
5422
5423 regs->len = XENA_REG_SPACE;
5424 regs->version = sp->pdev->subsystem_device;
5425
5426 for (i = 0; i < regs->len; i += 8) {
5427 reg = readq(sp->bar0 + i);
5428 memcpy((reg_space + i), &reg, 8);
5429 }
5430 }
5431
5432 /*
5433 * s2io_set_led - control NIC led
5434 */
5435 static void s2io_set_led(struct s2io_nic *sp, bool on)
5436 {
5437 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5438 u16 subid = sp->pdev->subsystem_device;
5439 u64 val64;
5440
5441 if ((sp->device_type == XFRAME_II_DEVICE) ||
5442 ((subid & 0xFF) >= 0x07)) {
5443 val64 = readq(&bar0->gpio_control);
5444 if (on)
5445 val64 |= GPIO_CTRL_GPIO_0;
5446 else
5447 val64 &= ~GPIO_CTRL_GPIO_0;
5448
5449 writeq(val64, &bar0->gpio_control);
5450 } else {
5451 val64 = readq(&bar0->adapter_control);
5452 if (on)
5453 val64 |= ADAPTER_LED_ON;
5454 else
5455 val64 &= ~ADAPTER_LED_ON;
5456
5457 writeq(val64, &bar0->adapter_control);
5458 }
5459
5460 }
5461
5462 /**
5463 * s2io_ethtool_set_led - To physically identify the nic on the system.
5464 * @dev : network device
5465 * @state: led setting
5466 *
5467 * Description: Used to physically identify the NIC on the system.
5468 * The Link LED will blink for a time specified by the user for
5469 * identification.
5470 * NOTE: The Link has to be Up to be able to blink the LED. Hence
5471 * identification is possible only if it's link is up.
5472 */
5473
5474 static int s2io_ethtool_set_led(struct net_device *dev,
5475 enum ethtool_phys_id_state state)
5476 {
5477 struct s2io_nic *sp = netdev_priv(dev);
5478 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5479 u16 subid = sp->pdev->subsystem_device;
5480
5481 if ((sp->device_type == XFRAME_I_DEVICE) && ((subid & 0xFF) < 0x07)) {
5482 u64 val64 = readq(&bar0->adapter_control);
5483 if (!(val64 & ADAPTER_CNTL_EN)) {
5484 pr_err("Adapter Link down, cannot blink LED\n");
5485 return -EAGAIN;
5486 }
5487 }
5488
5489 switch (state) {
5490 case ETHTOOL_ID_ACTIVE:
5491 sp->adapt_ctrl_org = readq(&bar0->gpio_control);
5492 return 1; /* cycle on/off once per second */
5493
5494 case ETHTOOL_ID_ON:
5495 s2io_set_led(sp, true);
5496 break;
5497
5498 case ETHTOOL_ID_OFF:
5499 s2io_set_led(sp, false);
5500 break;
5501
5502 case ETHTOOL_ID_INACTIVE:
5503 if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid))
5504 writeq(sp->adapt_ctrl_org, &bar0->gpio_control);
5505 }
5506
5507 return 0;
5508 }
5509
5510 static void s2io_ethtool_gringparam(struct net_device *dev,
5511 struct ethtool_ringparam *ering)
5512 {
5513 struct s2io_nic *sp = netdev_priv(dev);
5514 int i, tx_desc_count = 0, rx_desc_count = 0;
5515
5516 if (sp->rxd_mode == RXD_MODE_1) {
5517 ering->rx_max_pending = MAX_RX_DESC_1;
5518 ering->rx_jumbo_max_pending = MAX_RX_DESC_1;
5519 } else {
5520 ering->rx_max_pending = MAX_RX_DESC_2;
5521 ering->rx_jumbo_max_pending = MAX_RX_DESC_2;
5522 }
5523
5524 ering->tx_max_pending = MAX_TX_DESC;
5525
5526 for (i = 0; i < sp->config.rx_ring_num; i++)
5527 rx_desc_count += sp->config.rx_cfg[i].num_rxd;
5528 ering->rx_pending = rx_desc_count;
5529 ering->rx_jumbo_pending = rx_desc_count;
5530
5531 for (i = 0; i < sp->config.tx_fifo_num; i++)
5532 tx_desc_count += sp->config.tx_cfg[i].fifo_len;
5533 ering->tx_pending = tx_desc_count;
5534 DBG_PRINT(INFO_DBG, "max txds: %d\n", sp->config.max_txds);
5535 }
5536
5537 /**
5538 * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
5539 * @sp : private member of the device structure, which is a pointer to the
5540 * s2io_nic structure.
5541 * @ep : pointer to the structure with pause parameters given by ethtool.
5542 * Description:
5543 * Returns the Pause frame generation and reception capability of the NIC.
5544 * Return value:
5545 * void
5546 */
5547 static void s2io_ethtool_getpause_data(struct net_device *dev,
5548 struct ethtool_pauseparam *ep)
5549 {
5550 u64 val64;
5551 struct s2io_nic *sp = netdev_priv(dev);
5552 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5553
5554 val64 = readq(&bar0->rmac_pause_cfg);
5555 if (val64 & RMAC_PAUSE_GEN_ENABLE)
5556 ep->tx_pause = true;
5557 if (val64 & RMAC_PAUSE_RX_ENABLE)
5558 ep->rx_pause = true;
5559 ep->autoneg = false;
5560 }
5561
5562 /**
5563 * s2io_ethtool_setpause_data - set/reset pause frame generation.
5564 * @sp : private member of the device structure, which is a pointer to the
5565 * s2io_nic structure.
5566 * @ep : pointer to the structure with pause parameters given by ethtool.
5567 * Description:
5568 * It can be used to set or reset Pause frame generation or reception
5569 * support of the NIC.
5570 * Return value:
5571 * int, returns 0 on Success
5572 */
5573
5574 static int s2io_ethtool_setpause_data(struct net_device *dev,
5575 struct ethtool_pauseparam *ep)
5576 {
5577 u64 val64;
5578 struct s2io_nic *sp = netdev_priv(dev);
5579 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5580
5581 val64 = readq(&bar0->rmac_pause_cfg);
5582 if (ep->tx_pause)
5583 val64 |= RMAC_PAUSE_GEN_ENABLE;
5584 else
5585 val64 &= ~RMAC_PAUSE_GEN_ENABLE;
5586 if (ep->rx_pause)
5587 val64 |= RMAC_PAUSE_RX_ENABLE;
5588 else
5589 val64 &= ~RMAC_PAUSE_RX_ENABLE;
5590 writeq(val64, &bar0->rmac_pause_cfg);
5591 return 0;
5592 }
5593
5594 /**
5595 * read_eeprom - reads 4 bytes of data from user given offset.
5596 * @sp : private member of the device structure, which is a pointer to the
5597 * s2io_nic structure.
5598 * @off : offset at which the data must be written
5599 * @data : Its an output parameter where the data read at the given
5600 * offset is stored.
5601 * Description:
5602 * Will read 4 bytes of data from the user given offset and return the
5603 * read data.
5604 * NOTE: Will allow to read only part of the EEPROM visible through the
5605 * I2C bus.
5606 * Return value:
5607 * -1 on failure and 0 on success.
5608 */
5609
5610 #define S2IO_DEV_ID 5
5611 static int read_eeprom(struct s2io_nic *sp, int off, u64 *data)
5612 {
5613 int ret = -1;
5614 u32 exit_cnt = 0;
5615 u64 val64;
5616 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5617
5618 if (sp->device_type == XFRAME_I_DEVICE) {
5619 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
5620 I2C_CONTROL_ADDR(off) |
5621 I2C_CONTROL_BYTE_CNT(0x3) |
5622 I2C_CONTROL_READ |
5623 I2C_CONTROL_CNTL_START;
5624 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5625
5626 while (exit_cnt < 5) {
5627 val64 = readq(&bar0->i2c_control);
5628 if (I2C_CONTROL_CNTL_END(val64)) {
5629 *data = I2C_CONTROL_GET_DATA(val64);
5630 ret = 0;
5631 break;
5632 }
5633 msleep(50);
5634 exit_cnt++;
5635 }
5636 }
5637
5638 if (sp->device_type == XFRAME_II_DEVICE) {
5639 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5640 SPI_CONTROL_BYTECNT(0x3) |
5641 SPI_CONTROL_CMD(0x3) | SPI_CONTROL_ADDR(off);
5642 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5643 val64 |= SPI_CONTROL_REQ;
5644 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5645 while (exit_cnt < 5) {
5646 val64 = readq(&bar0->spi_control);
5647 if (val64 & SPI_CONTROL_NACK) {
5648 ret = 1;
5649 break;
5650 } else if (val64 & SPI_CONTROL_DONE) {
5651 *data = readq(&bar0->spi_data);
5652 *data &= 0xffffff;
5653 ret = 0;
5654 break;
5655 }
5656 msleep(50);
5657 exit_cnt++;
5658 }
5659 }
5660 return ret;
5661 }
5662
5663 /**
5664 * write_eeprom - actually writes the relevant part of the data value.
5665 * @sp : private member of the device structure, which is a pointer to the
5666 * s2io_nic structure.
5667 * @off : offset at which the data must be written
5668 * @data : The data that is to be written
5669 * @cnt : Number of bytes of the data that are actually to be written into
5670 * the Eeprom. (max of 3)
5671 * Description:
5672 * Actually writes the relevant part of the data value into the Eeprom
5673 * through the I2C bus.
5674 * Return value:
5675 * 0 on success, -1 on failure.
5676 */
5677
5678 static int write_eeprom(struct s2io_nic *sp, int off, u64 data, int cnt)
5679 {
5680 int exit_cnt = 0, ret = -1;
5681 u64 val64;
5682 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5683
5684 if (sp->device_type == XFRAME_I_DEVICE) {
5685 val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) |
5686 I2C_CONTROL_ADDR(off) |
5687 I2C_CONTROL_BYTE_CNT(cnt) |
5688 I2C_CONTROL_SET_DATA((u32)data) |
5689 I2C_CONTROL_CNTL_START;
5690 SPECIAL_REG_WRITE(val64, &bar0->i2c_control, LF);
5691
5692 while (exit_cnt < 5) {
5693 val64 = readq(&bar0->i2c_control);
5694 if (I2C_CONTROL_CNTL_END(val64)) {
5695 if (!(val64 & I2C_CONTROL_NACK))
5696 ret = 0;
5697 break;
5698 }
5699 msleep(50);
5700 exit_cnt++;
5701 }
5702 }
5703
5704 if (sp->device_type == XFRAME_II_DEVICE) {
5705 int write_cnt = (cnt == 8) ? 0 : cnt;
5706 writeq(SPI_DATA_WRITE(data, (cnt << 3)), &bar0->spi_data);
5707
5708 val64 = SPI_CONTROL_KEY(0x9) | SPI_CONTROL_SEL1 |
5709 SPI_CONTROL_BYTECNT(write_cnt) |
5710 SPI_CONTROL_CMD(0x2) | SPI_CONTROL_ADDR(off);
5711 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5712 val64 |= SPI_CONTROL_REQ;
5713 SPECIAL_REG_WRITE(val64, &bar0->spi_control, LF);
5714 while (exit_cnt < 5) {
5715 val64 = readq(&bar0->spi_control);
5716 if (val64 & SPI_CONTROL_NACK) {
5717 ret = 1;
5718 break;
5719 } else if (val64 & SPI_CONTROL_DONE) {
5720 ret = 0;
5721 break;
5722 }
5723 msleep(50);
5724 exit_cnt++;
5725 }
5726 }
5727 return ret;
5728 }
5729 static void s2io_vpd_read(struct s2io_nic *nic)
5730 {
5731 u8 *vpd_data;
5732 u8 data;
5733 int i = 0, cnt, len, fail = 0;
5734 int vpd_addr = 0x80;
5735 struct swStat *swstats = &nic->mac_control.stats_info->sw_stat;
5736
5737 if (nic->device_type == XFRAME_II_DEVICE) {
5738 strcpy(nic->product_name, "Xframe II 10GbE network adapter");
5739 vpd_addr = 0x80;
5740 } else {
5741 strcpy(nic->product_name, "Xframe I 10GbE network adapter");
5742 vpd_addr = 0x50;
5743 }
5744 strcpy(nic->serial_num, "NOT AVAILABLE");
5745
5746 vpd_data = kmalloc(256, GFP_KERNEL);
5747 if (!vpd_data) {
5748 swstats->mem_alloc_fail_cnt++;
5749 return;
5750 }
5751 swstats->mem_allocated += 256;
5752
5753 for (i = 0; i < 256; i += 4) {
5754 pci_write_config_byte(nic->pdev, (vpd_addr + 2), i);
5755 pci_read_config_byte(nic->pdev, (vpd_addr + 2), &data);
5756 pci_write_config_byte(nic->pdev, (vpd_addr + 3), 0);
5757 for (cnt = 0; cnt < 5; cnt++) {
5758 msleep(2);
5759 pci_read_config_byte(nic->pdev, (vpd_addr + 3), &data);
5760 if (data == 0x80)
5761 break;
5762 }
5763 if (cnt >= 5) {
5764 DBG_PRINT(ERR_DBG, "Read of VPD data failed\n");
5765 fail = 1;
5766 break;
5767 }
5768 pci_read_config_dword(nic->pdev, (vpd_addr + 4),
5769 (u32 *)&vpd_data[i]);
5770 }
5771
5772 if (!fail) {
5773 /* read serial number of adapter */
5774 for (cnt = 0; cnt < 252; cnt++) {
5775 if ((vpd_data[cnt] == 'S') &&
5776 (vpd_data[cnt+1] == 'N')) {
5777 len = vpd_data[cnt+2];
5778 if (len < min(VPD_STRING_LEN, 256-cnt-2)) {
5779 memcpy(nic->serial_num,
5780 &vpd_data[cnt + 3],
5781 len);
5782 memset(nic->serial_num+len,
5783 0,
5784 VPD_STRING_LEN-len);
5785 break;
5786 }
5787 }
5788 }
5789 }
5790
5791 if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
5792 len = vpd_data[1];
5793 memcpy(nic->product_name, &vpd_data[3], len);
5794 nic->product_name[len] = 0;
5795 }
5796 kfree(vpd_data);
5797 swstats->mem_freed += 256;
5798 }
5799
5800 /**
5801 * s2io_ethtool_geeprom - reads the value stored in the Eeprom.
5802 * @sp : private member of the device structure, which is a pointer to the * s2io_nic structure.
5803 * @eeprom : pointer to the user level structure provided by ethtool,
5804 * containing all relevant information.
5805 * @data_buf : user defined value to be written into Eeprom.
5806 * Description: Reads the values stored in the Eeprom at given offset
5807 * for a given length. Stores these values int the input argument data
5808 * buffer 'data_buf' and returns these to the caller (ethtool.)
5809 * Return value:
5810 * int 0 on success
5811 */
5812
5813 static int s2io_ethtool_geeprom(struct net_device *dev,
5814 struct ethtool_eeprom *eeprom, u8 * data_buf)
5815 {
5816 u32 i, valid;
5817 u64 data;
5818 struct s2io_nic *sp = netdev_priv(dev);
5819
5820 eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
5821
5822 if ((eeprom->offset + eeprom->len) > (XENA_EEPROM_SPACE))
5823 eeprom->len = XENA_EEPROM_SPACE - eeprom->offset;
5824
5825 for (i = 0; i < eeprom->len; i += 4) {
5826 if (read_eeprom(sp, (eeprom->offset + i), &data)) {
5827 DBG_PRINT(ERR_DBG, "Read of EEPROM failed\n");
5828 return -EFAULT;
5829 }
5830 valid = INV(data);
5831 memcpy((data_buf + i), &valid, 4);
5832 }
5833 return 0;
5834 }
5835
5836 /**
5837 * s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
5838 * @sp : private member of the device structure, which is a pointer to the
5839 * s2io_nic structure.
5840 * @eeprom : pointer to the user level structure provided by ethtool,
5841 * containing all relevant information.
5842 * @data_buf ; user defined value to be written into Eeprom.
5843 * Description:
5844 * Tries to write the user provided value in the Eeprom, at the offset
5845 * given by the user.
5846 * Return value:
5847 * 0 on success, -EFAULT on failure.
5848 */
5849
5850 static int s2io_ethtool_seeprom(struct net_device *dev,
5851 struct ethtool_eeprom *eeprom,
5852 u8 *data_buf)
5853 {
5854 int len = eeprom->len, cnt = 0;
5855 u64 valid = 0, data;
5856 struct s2io_nic *sp = netdev_priv(dev);
5857
5858 if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
5859 DBG_PRINT(ERR_DBG,
5860 "ETHTOOL_WRITE_EEPROM Err: "
5861 "Magic value is wrong, it is 0x%x should be 0x%x\n",
5862 (sp->pdev->vendor | (sp->pdev->device << 16)),
5863 eeprom->magic);
5864 return -EFAULT;
5865 }
5866
5867 while (len) {
5868 data = (u32)data_buf[cnt] & 0x000000FF;
5869 if (data)
5870 valid = (u32)(data << 24);
5871 else
5872 valid = data;
5873
5874 if (write_eeprom(sp, (eeprom->offset + cnt), valid, 0)) {
5875 DBG_PRINT(ERR_DBG,
5876 "ETHTOOL_WRITE_EEPROM Err: "
5877 "Cannot write into the specified offset\n");
5878 return -EFAULT;
5879 }
5880 cnt++;
5881 len--;
5882 }
5883
5884 return 0;
5885 }
5886
5887 /**
5888 * s2io_register_test - reads and writes into all clock domains.
5889 * @sp : private member of the device structure, which is a pointer to the
5890 * s2io_nic structure.
5891 * @data : variable that returns the result of each of the test conducted b
5892 * by the driver.
5893 * Description:
5894 * Read and write into all clock domains. The NIC has 3 clock domains,
5895 * see that registers in all the three regions are accessible.
5896 * Return value:
5897 * 0 on success.
5898 */
5899
5900 static int s2io_register_test(struct s2io_nic *sp, uint64_t *data)
5901 {
5902 struct XENA_dev_config __iomem *bar0 = sp->bar0;
5903 u64 val64 = 0, exp_val;
5904 int fail = 0;
5905
5906 val64 = readq(&bar0->pif_rd_swapper_fb);
5907 if (val64 != 0x123456789abcdefULL) {
5908 fail = 1;
5909 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 1);
5910 }
5911
5912 val64 = readq(&bar0->rmac_pause_cfg);
5913 if (val64 != 0xc000ffff00000000ULL) {
5914 fail = 1;
5915 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 2);
5916 }
5917
5918 val64 = readq(&bar0->rx_queue_cfg);
5919 if (sp->device_type == XFRAME_II_DEVICE)
5920 exp_val = 0x0404040404040404ULL;
5921 else
5922 exp_val = 0x0808080808080808ULL;
5923 if (val64 != exp_val) {
5924 fail = 1;
5925 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 3);
5926 }
5927
5928 val64 = readq(&bar0->xgxs_efifo_cfg);
5929 if (val64 != 0x000000001923141EULL) {
5930 fail = 1;
5931 DBG_PRINT(INFO_DBG, "Read Test level %d fails\n", 4);
5932 }
5933
5934 val64 = 0x5A5A5A5A5A5A5A5AULL;
5935 writeq(val64, &bar0->xmsi_data);
5936 val64 = readq(&bar0->xmsi_data);
5937 if (val64 != 0x5A5A5A5A5A5A5A5AULL) {
5938 fail = 1;
5939 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 1);
5940 }
5941
5942 val64 = 0xA5A5A5A5A5A5A5A5ULL;
5943 writeq(val64, &bar0->xmsi_data);
5944 val64 = readq(&bar0->xmsi_data);
5945 if (val64 != 0xA5A5A5A5A5A5A5A5ULL) {
5946 fail = 1;
5947 DBG_PRINT(ERR_DBG, "Write Test level %d fails\n", 2);
5948 }
5949
5950 *data = fail;
5951 return fail;
5952 }
5953
5954 /**
5955 * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
5956 * @sp : private member of the device structure, which is a pointer to the
5957 * s2io_nic structure.
5958 * @data:variable that returns the result of each of the test conducted by
5959 * the driver.
5960 * Description:
5961 * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
5962 * register.
5963 * Return value:
5964 * 0 on success.
5965 */
5966
5967 static int s2io_eeprom_test(struct s2io_nic *sp, uint64_t *data)
5968 {
5969 int fail = 0;
5970 u64 ret_data, org_4F0, org_7F0;
5971 u8 saved_4F0 = 0, saved_7F0 = 0;
5972 struct net_device *dev = sp->dev;
5973
5974 /* Test Write Error at offset 0 */
5975 /* Note that SPI interface allows write access to all areas
5976 * of EEPROM. Hence doing all negative testing only for Xframe I.
5977 */
5978 if (sp->device_type == XFRAME_I_DEVICE)
5979 if (!write_eeprom(sp, 0, 0, 3))
5980 fail = 1;
5981
5982 /* Save current values at offsets 0x4F0 and 0x7F0 */
5983 if (!read_eeprom(sp, 0x4F0, &org_4F0))
5984 saved_4F0 = 1;
5985 if (!read_eeprom(sp, 0x7F0, &org_7F0))
5986 saved_7F0 = 1;
5987
5988 /* Test Write at offset 4f0 */
5989 if (write_eeprom(sp, 0x4F0, 0x012345, 3))
5990 fail = 1;
5991 if (read_eeprom(sp, 0x4F0, &ret_data))
5992 fail = 1;
5993
5994 if (ret_data != 0x012345) {
5995 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x4F0. "
5996 "Data written %llx Data read %llx\n",
5997 dev->name, (unsigned long long)0x12345,
5998 (unsigned long long)ret_data);
5999 fail = 1;
6000 }
6001
6002 /* Reset the EEPROM data go FFFF */
6003 write_eeprom(sp, 0x4F0, 0xFFFFFF, 3);
6004
6005 /* Test Write Request Error at offset 0x7c */
6006 if (sp->device_type == XFRAME_I_DEVICE)
6007 if (!write_eeprom(sp, 0x07C, 0, 3))
6008 fail = 1;
6009
6010 /* Test Write Request at offset 0x7f0 */
6011 if (write_eeprom(sp, 0x7F0, 0x012345, 3))
6012 fail = 1;
6013 if (read_eeprom(sp, 0x7F0, &ret_data))
6014 fail = 1;
6015
6016 if (ret_data != 0x012345) {
6017 DBG_PRINT(ERR_DBG, "%s: eeprom test error at offset 0x7F0. "
6018 "Data written %llx Data read %llx\n",
6019 dev->name, (unsigned long long)0x12345,
6020 (unsigned long long)ret_data);
6021 fail = 1;
6022 }
6023
6024 /* Reset the EEPROM data go FFFF */
6025 write_eeprom(sp, 0x7F0, 0xFFFFFF, 3);
6026
6027 if (sp->device_type == XFRAME_I_DEVICE) {
6028 /* Test Write Error at offset 0x80 */
6029 if (!write_eeprom(sp, 0x080, 0, 3))
6030 fail = 1;
6031
6032 /* Test Write Error at offset 0xfc */
6033 if (!write_eeprom(sp, 0x0FC, 0, 3))
6034 fail = 1;
6035
6036 /* Test Write Error at offset 0x100 */
6037 if (!write_eeprom(sp, 0x100, 0, 3))
6038 fail = 1;
6039
6040 /* Test Write Error at offset 4ec */
6041 if (!write_eeprom(sp, 0x4EC, 0, 3))
6042 fail = 1;
6043 }
6044
6045 /* Restore values at offsets 0x4F0 and 0x7F0 */
6046 if (saved_4F0)
6047 write_eeprom(sp, 0x4F0, org_4F0, 3);
6048 if (saved_7F0)
6049 write_eeprom(sp, 0x7F0, org_7F0, 3);
6050
6051 *data = fail;
6052 return fail;
6053 }
6054
6055 /**
6056 * s2io_bist_test - invokes the MemBist test of the card .
6057 * @sp : private member of the device structure, which is a pointer to the
6058 * s2io_nic structure.
6059 * @data:variable that returns the result of each of the test conducted by
6060 * the driver.
6061 * Description:
6062 * This invokes the MemBist test of the card. We give around
6063 * 2 secs time for the Test to complete. If it's still not complete
6064 * within this peiod, we consider that the test failed.
6065 * Return value:
6066 * 0 on success and -1 on failure.
6067 */
6068
6069 static int s2io_bist_test(struct s2io_nic *sp, uint64_t *data)
6070 {
6071 u8 bist = 0;
6072 int cnt = 0, ret = -1;
6073
6074 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6075 bist |= PCI_BIST_START;
6076 pci_write_config_word(sp->pdev, PCI_BIST, bist);
6077
6078 while (cnt < 20) {
6079 pci_read_config_byte(sp->pdev, PCI_BIST, &bist);
6080 if (!(bist & PCI_BIST_START)) {
6081 *data = (bist & PCI_BIST_CODE_MASK);
6082 ret = 0;
6083 break;
6084 }
6085 msleep(100);
6086 cnt++;
6087 }
6088
6089 return ret;
6090 }
6091
6092 /**
6093 * s2io-link_test - verifies the link state of the nic
6094 * @sp ; private member of the device structure, which is a pointer to the
6095 * s2io_nic structure.
6096 * @data: variable that returns the result of each of the test conducted by
6097 * the driver.
6098 * Description:
6099 * The function verifies the link state of the NIC and updates the input
6100 * argument 'data' appropriately.
6101 * Return value:
6102 * 0 on success.
6103 */
6104
6105 static int s2io_link_test(struct s2io_nic *sp, uint64_t *data)
6106 {
6107 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6108 u64 val64;
6109
6110 val64 = readq(&bar0->adapter_status);
6111 if (!(LINK_IS_UP(val64)))
6112 *data = 1;
6113 else
6114 *data = 0;
6115
6116 return *data;
6117 }
6118
6119 /**
6120 * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
6121 * @sp - private member of the device structure, which is a pointer to the
6122 * s2io_nic structure.
6123 * @data - variable that returns the result of each of the test
6124 * conducted by the driver.
6125 * Description:
6126 * This is one of the offline test that tests the read and write
6127 * access to the RldRam chip on the NIC.
6128 * Return value:
6129 * 0 on success.
6130 */
6131
6132 static int s2io_rldram_test(struct s2io_nic *sp, uint64_t *data)
6133 {
6134 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6135 u64 val64;
6136 int cnt, iteration = 0, test_fail = 0;
6137
6138 val64 = readq(&bar0->adapter_control);
6139 val64 &= ~ADAPTER_ECC_EN;
6140 writeq(val64, &bar0->adapter_control);
6141
6142 val64 = readq(&bar0->mc_rldram_test_ctrl);
6143 val64 |= MC_RLDRAM_TEST_MODE;
6144 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6145
6146 val64 = readq(&bar0->mc_rldram_mrs);
6147 val64 |= MC_RLDRAM_QUEUE_SIZE_ENABLE;
6148 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6149
6150 val64 |= MC_RLDRAM_MRS_ENABLE;
6151 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
6152
6153 while (iteration < 2) {
6154 val64 = 0x55555555aaaa0000ULL;
6155 if (iteration == 1)
6156 val64 ^= 0xFFFFFFFFFFFF0000ULL;
6157 writeq(val64, &bar0->mc_rldram_test_d0);
6158
6159 val64 = 0xaaaa5a5555550000ULL;
6160 if (iteration == 1)
6161 val64 ^= 0xFFFFFFFFFFFF0000ULL;
6162 writeq(val64, &bar0->mc_rldram_test_d1);
6163
6164 val64 = 0x55aaaaaaaa5a0000ULL;
6165 if (iteration == 1)
6166 val64 ^= 0xFFFFFFFFFFFF0000ULL;
6167 writeq(val64, &bar0->mc_rldram_test_d2);
6168
6169 val64 = (u64) (0x0000003ffffe0100ULL);
6170 writeq(val64, &bar0->mc_rldram_test_add);
6171
6172 val64 = MC_RLDRAM_TEST_MODE |
6173 MC_RLDRAM_TEST_WRITE |
6174 MC_RLDRAM_TEST_GO;
6175 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6176
6177 for (cnt = 0; cnt < 5; cnt++) {
6178 val64 = readq(&bar0->mc_rldram_test_ctrl);
6179 if (val64 & MC_RLDRAM_TEST_DONE)
6180 break;
6181 msleep(200);
6182 }
6183
6184 if (cnt == 5)
6185 break;
6186
6187 val64 = MC_RLDRAM_TEST_MODE | MC_RLDRAM_TEST_GO;
6188 SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_test_ctrl, LF);
6189
6190 for (cnt = 0; cnt < 5; cnt++) {
6191 val64 = readq(&bar0->mc_rldram_test_ctrl);
6192 if (val64 & MC_RLDRAM_TEST_DONE)
6193 break;
6194 msleep(500);
6195 }
6196
6197 if (cnt == 5)
6198 break;
6199
6200 val64 = readq(&bar0->mc_rldram_test_ctrl);
6201 if (!(val64 & MC_RLDRAM_TEST_PASS))
6202 test_fail = 1;
6203
6204 iteration++;
6205 }
6206
6207 *data = test_fail;
6208
6209 /* Bring the adapter out of test mode */
6210 SPECIAL_REG_WRITE(0, &bar0->mc_rldram_test_ctrl, LF);
6211
6212 return test_fail;
6213 }
6214
6215 /**
6216 * s2io_ethtool_test - conducts 6 tsets to determine the health of card.
6217 * @sp : private member of the device structure, which is a pointer to the
6218 * s2io_nic structure.
6219 * @ethtest : pointer to a ethtool command specific structure that will be
6220 * returned to the user.
6221 * @data : variable that returns the result of each of the test
6222 * conducted by the driver.
6223 * Description:
6224 * This function conducts 6 tests ( 4 offline and 2 online) to determine
6225 * the health of the card.
6226 * Return value:
6227 * void
6228 */
6229
6230 static void s2io_ethtool_test(struct net_device *dev,
6231 struct ethtool_test *ethtest,
6232 uint64_t *data)
6233 {
6234 struct s2io_nic *sp = netdev_priv(dev);
6235 int orig_state = netif_running(sp->dev);
6236
6237 if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
6238 /* Offline Tests. */
6239 if (orig_state)
6240 s2io_close(sp->dev);
6241
6242 if (s2io_register_test(sp, &data[0]))
6243 ethtest->flags |= ETH_TEST_FL_FAILED;
6244
6245 s2io_reset(sp);
6246
6247 if (s2io_rldram_test(sp, &data[3]))
6248 ethtest->flags |= ETH_TEST_FL_FAILED;
6249
6250 s2io_reset(sp);
6251
6252 if (s2io_eeprom_test(sp, &data[1]))
6253 ethtest->flags |= ETH_TEST_FL_FAILED;
6254
6255 if (s2io_bist_test(sp, &data[4]))
6256 ethtest->flags |= ETH_TEST_FL_FAILED;
6257
6258 if (orig_state)
6259 s2io_open(sp->dev);
6260
6261 data[2] = 0;
6262 } else {
6263 /* Online Tests. */
6264 if (!orig_state) {
6265 DBG_PRINT(ERR_DBG, "%s: is not up, cannot run test\n",
6266 dev->name);
6267 data[0] = -1;
6268 data[1] = -1;
6269 data[2] = -1;
6270 data[3] = -1;
6271 data[4] = -1;
6272 }
6273
6274 if (s2io_link_test(sp, &data[2]))
6275 ethtest->flags |= ETH_TEST_FL_FAILED;
6276
6277 data[0] = 0;
6278 data[1] = 0;
6279 data[3] = 0;
6280 data[4] = 0;
6281 }
6282 }
6283
6284 static void s2io_get_ethtool_stats(struct net_device *dev,
6285 struct ethtool_stats *estats,
6286 u64 *tmp_stats)
6287 {
6288 int i = 0, k;
6289 struct s2io_nic *sp = netdev_priv(dev);
6290 struct stat_block *stats = sp->mac_control.stats_info;
6291 struct swStat *swstats = &stats->sw_stat;
6292 struct xpakStat *xstats = &stats->xpak_stat;
6293
6294 s2io_updt_stats(sp);
6295 tmp_stats[i++] =
6296 (u64)le32_to_cpu(stats->tmac_frms_oflow) << 32 |
6297 le32_to_cpu(stats->tmac_frms);
6298 tmp_stats[i++] =
6299 (u64)le32_to_cpu(stats->tmac_data_octets_oflow) << 32 |
6300 le32_to_cpu(stats->tmac_data_octets);
6301 tmp_stats[i++] = le64_to_cpu(stats->tmac_drop_frms);
6302 tmp_stats[i++] =
6303 (u64)le32_to_cpu(stats->tmac_mcst_frms_oflow) << 32 |
6304 le32_to_cpu(stats->tmac_mcst_frms);
6305 tmp_stats[i++] =
6306 (u64)le32_to_cpu(stats->tmac_bcst_frms_oflow) << 32 |
6307 le32_to_cpu(stats->tmac_bcst_frms);
6308 tmp_stats[i++] = le64_to_cpu(stats->tmac_pause_ctrl_frms);
6309 tmp_stats[i++] =
6310 (u64)le32_to_cpu(stats->tmac_ttl_octets_oflow) << 32 |
6311 le32_to_cpu(stats->tmac_ttl_octets);
6312 tmp_stats[i++] =
6313 (u64)le32_to_cpu(stats->tmac_ucst_frms_oflow) << 32 |
6314 le32_to_cpu(stats->tmac_ucst_frms);
6315 tmp_stats[i++] =
6316 (u64)le32_to_cpu(stats->tmac_nucst_frms_oflow) << 32 |
6317 le32_to_cpu(stats->tmac_nucst_frms);
6318 tmp_stats[i++] =
6319 (u64)le32_to_cpu(stats->tmac_any_err_frms_oflow) << 32 |
6320 le32_to_cpu(stats->tmac_any_err_frms);
6321 tmp_stats[i++] = le64_to_cpu(stats->tmac_ttl_less_fb_octets);
6322 tmp_stats[i++] = le64_to_cpu(stats->tmac_vld_ip_octets);
6323 tmp_stats[i++] =
6324 (u64)le32_to_cpu(stats->tmac_vld_ip_oflow) << 32 |
6325 le32_to_cpu(stats->tmac_vld_ip);
6326 tmp_stats[i++] =
6327 (u64)le32_to_cpu(stats->tmac_drop_ip_oflow) << 32 |
6328 le32_to_cpu(stats->tmac_drop_ip);
6329 tmp_stats[i++] =
6330 (u64)le32_to_cpu(stats->tmac_icmp_oflow) << 32 |
6331 le32_to_cpu(stats->tmac_icmp);
6332 tmp_stats[i++] =
6333 (u64)le32_to_cpu(stats->tmac_rst_tcp_oflow) << 32 |
6334 le32_to_cpu(stats->tmac_rst_tcp);
6335 tmp_stats[i++] = le64_to_cpu(stats->tmac_tcp);
6336 tmp_stats[i++] = (u64)le32_to_cpu(stats->tmac_udp_oflow) << 32 |
6337 le32_to_cpu(stats->tmac_udp);
6338 tmp_stats[i++] =
6339 (u64)le32_to_cpu(stats->rmac_vld_frms_oflow) << 32 |
6340 le32_to_cpu(stats->rmac_vld_frms);
6341 tmp_stats[i++] =
6342 (u64)le32_to_cpu(stats->rmac_data_octets_oflow) << 32 |
6343 le32_to_cpu(stats->rmac_data_octets);
6344 tmp_stats[i++] = le64_to_cpu(stats->rmac_fcs_err_frms);
6345 tmp_stats[i++] = le64_to_cpu(stats->rmac_drop_frms);
6346 tmp_stats[i++] =
6347 (u64)le32_to_cpu(stats->rmac_vld_mcst_frms_oflow) << 32 |
6348 le32_to_cpu(stats->rmac_vld_mcst_frms);
6349 tmp_stats[i++] =
6350 (u64)le32_to_cpu(stats->rmac_vld_bcst_frms_oflow) << 32 |
6351 le32_to_cpu(stats->rmac_vld_bcst_frms);
6352 tmp_stats[i++] = le32_to_cpu(stats->rmac_in_rng_len_err_frms);
6353 tmp_stats[i++] = le32_to_cpu(stats->rmac_out_rng_len_err_frms);
6354 tmp_stats[i++] = le64_to_cpu(stats->rmac_long_frms);
6355 tmp_stats[i++] = le64_to_cpu(stats->rmac_pause_ctrl_frms);
6356 tmp_stats[i++] = le64_to_cpu(stats->rmac_unsup_ctrl_frms);
6357 tmp_stats[i++] =
6358 (u64)le32_to_cpu(stats->rmac_ttl_octets_oflow) << 32 |
6359 le32_to_cpu(stats->rmac_ttl_octets);
6360 tmp_stats[i++] =
6361 (u64)le32_to_cpu(stats->rmac_accepted_ucst_frms_oflow) << 32
6362 | le32_to_cpu(stats->rmac_accepted_ucst_frms);
6363 tmp_stats[i++] =
6364 (u64)le32_to_cpu(stats->rmac_accepted_nucst_frms_oflow)
6365 << 32 | le32_to_cpu(stats->rmac_accepted_nucst_frms);
6366 tmp_stats[i++] =
6367 (u64)le32_to_cpu(stats->rmac_discarded_frms_oflow) << 32 |
6368 le32_to_cpu(stats->rmac_discarded_frms);
6369 tmp_stats[i++] =
6370 (u64)le32_to_cpu(stats->rmac_drop_events_oflow)
6371 << 32 | le32_to_cpu(stats->rmac_drop_events);
6372 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_less_fb_octets);
6373 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_frms);
6374 tmp_stats[i++] =
6375 (u64)le32_to_cpu(stats->rmac_usized_frms_oflow) << 32 |
6376 le32_to_cpu(stats->rmac_usized_frms);
6377 tmp_stats[i++] =
6378 (u64)le32_to_cpu(stats->rmac_osized_frms_oflow) << 32 |
6379 le32_to_cpu(stats->rmac_osized_frms);
6380 tmp_stats[i++] =
6381 (u64)le32_to_cpu(stats->rmac_frag_frms_oflow) << 32 |
6382 le32_to_cpu(stats->rmac_frag_frms);
6383 tmp_stats[i++] =
6384 (u64)le32_to_cpu(stats->rmac_jabber_frms_oflow) << 32 |
6385 le32_to_cpu(stats->rmac_jabber_frms);
6386 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_64_frms);
6387 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_65_127_frms);
6388 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_128_255_frms);
6389 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_256_511_frms);
6390 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_512_1023_frms);
6391 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_1024_1518_frms);
6392 tmp_stats[i++] =
6393 (u64)le32_to_cpu(stats->rmac_ip_oflow) << 32 |
6394 le32_to_cpu(stats->rmac_ip);
6395 tmp_stats[i++] = le64_to_cpu(stats->rmac_ip_octets);
6396 tmp_stats[i++] = le32_to_cpu(stats->rmac_hdr_err_ip);
6397 tmp_stats[i++] =
6398 (u64)le32_to_cpu(stats->rmac_drop_ip_oflow) << 32 |
6399 le32_to_cpu(stats->rmac_drop_ip);
6400 tmp_stats[i++] =
6401 (u64)le32_to_cpu(stats->rmac_icmp_oflow) << 32 |
6402 le32_to_cpu(stats->rmac_icmp);
6403 tmp_stats[i++] = le64_to_cpu(stats->rmac_tcp);
6404 tmp_stats[i++] =
6405 (u64)le32_to_cpu(stats->rmac_udp_oflow) << 32 |
6406 le32_to_cpu(stats->rmac_udp);
6407 tmp_stats[i++] =
6408 (u64)le32_to_cpu(stats->rmac_err_drp_udp_oflow) << 32 |
6409 le32_to_cpu(stats->rmac_err_drp_udp);
6410 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_err_sym);
6411 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q0);
6412 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q1);
6413 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q2);
6414 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q3);
6415 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q4);
6416 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q5);
6417 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q6);
6418 tmp_stats[i++] = le64_to_cpu(stats->rmac_frms_q7);
6419 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q0);
6420 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q1);
6421 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q2);
6422 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q3);
6423 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q4);
6424 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q5);
6425 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q6);
6426 tmp_stats[i++] = le16_to_cpu(stats->rmac_full_q7);
6427 tmp_stats[i++] =
6428 (u64)le32_to_cpu(stats->rmac_pause_cnt_oflow) << 32 |
6429 le32_to_cpu(stats->rmac_pause_cnt);
6430 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_data_err_cnt);
6431 tmp_stats[i++] = le64_to_cpu(stats->rmac_xgmii_ctrl_err_cnt);
6432 tmp_stats[i++] =
6433 (u64)le32_to_cpu(stats->rmac_accepted_ip_oflow) << 32 |
6434 le32_to_cpu(stats->rmac_accepted_ip);
6435 tmp_stats[i++] = le32_to_cpu(stats->rmac_err_tcp);
6436 tmp_stats[i++] = le32_to_cpu(stats->rd_req_cnt);
6437 tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_cnt);
6438 tmp_stats[i++] = le32_to_cpu(stats->new_rd_req_rtry_cnt);
6439 tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_cnt);
6440 tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_rd_ack_cnt);
6441 tmp_stats[i++] = le32_to_cpu(stats->wr_req_cnt);
6442 tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_cnt);
6443 tmp_stats[i++] = le32_to_cpu(stats->new_wr_req_rtry_cnt);
6444 tmp_stats[i++] = le32_to_cpu(stats->wr_rtry_cnt);
6445 tmp_stats[i++] = le32_to_cpu(stats->wr_disc_cnt);
6446 tmp_stats[i++] = le32_to_cpu(stats->rd_rtry_wr_ack_cnt);
6447 tmp_stats[i++] = le32_to_cpu(stats->txp_wr_cnt);
6448 tmp_stats[i++] = le32_to_cpu(stats->txd_rd_cnt);
6449 tmp_stats[i++] = le32_to_cpu(stats->txd_wr_cnt);
6450 tmp_stats[i++] = le32_to_cpu(stats->rxd_rd_cnt);
6451 tmp_stats[i++] = le32_to_cpu(stats->rxd_wr_cnt);
6452 tmp_stats[i++] = le32_to_cpu(stats->txf_rd_cnt);
6453 tmp_stats[i++] = le32_to_cpu(stats->rxf_wr_cnt);
6454
6455 /* Enhanced statistics exist only for Hercules */
6456 if (sp->device_type == XFRAME_II_DEVICE) {
6457 tmp_stats[i++] =
6458 le64_to_cpu(stats->rmac_ttl_1519_4095_frms);
6459 tmp_stats[i++] =
6460 le64_to_cpu(stats->rmac_ttl_4096_8191_frms);
6461 tmp_stats[i++] =
6462 le64_to_cpu(stats->rmac_ttl_8192_max_frms);
6463 tmp_stats[i++] = le64_to_cpu(stats->rmac_ttl_gt_max_frms);
6464 tmp_stats[i++] = le64_to_cpu(stats->rmac_osized_alt_frms);
6465 tmp_stats[i++] = le64_to_cpu(stats->rmac_jabber_alt_frms);
6466 tmp_stats[i++] = le64_to_cpu(stats->rmac_gt_max_alt_frms);
6467 tmp_stats[i++] = le64_to_cpu(stats->rmac_vlan_frms);
6468 tmp_stats[i++] = le32_to_cpu(stats->rmac_len_discard);
6469 tmp_stats[i++] = le32_to_cpu(stats->rmac_fcs_discard);
6470 tmp_stats[i++] = le32_to_cpu(stats->rmac_pf_discard);
6471 tmp_stats[i++] = le32_to_cpu(stats->rmac_da_discard);
6472 tmp_stats[i++] = le32_to_cpu(stats->rmac_red_discard);
6473 tmp_stats[i++] = le32_to_cpu(stats->rmac_rts_discard);
6474 tmp_stats[i++] = le32_to_cpu(stats->rmac_ingm_full_discard);
6475 tmp_stats[i++] = le32_to_cpu(stats->link_fault_cnt);
6476 }
6477
6478 tmp_stats[i++] = 0;
6479 tmp_stats[i++] = swstats->single_ecc_errs;
6480 tmp_stats[i++] = swstats->double_ecc_errs;
6481 tmp_stats[i++] = swstats->parity_err_cnt;
6482 tmp_stats[i++] = swstats->serious_err_cnt;
6483 tmp_stats[i++] = swstats->soft_reset_cnt;
6484 tmp_stats[i++] = swstats->fifo_full_cnt;
6485 for (k = 0; k < MAX_RX_RINGS; k++)
6486 tmp_stats[i++] = swstats->ring_full_cnt[k];
6487 tmp_stats[i++] = xstats->alarm_transceiver_temp_high;
6488 tmp_stats[i++] = xstats->alarm_transceiver_temp_low;
6489 tmp_stats[i++] = xstats->alarm_laser_bias_current_high;
6490 tmp_stats[i++] = xstats->alarm_laser_bias_current_low;
6491 tmp_stats[i++] = xstats->alarm_laser_output_power_high;
6492 tmp_stats[i++] = xstats->alarm_laser_output_power_low;
6493 tmp_stats[i++] = xstats->warn_transceiver_temp_high;
6494 tmp_stats[i++] = xstats->warn_transceiver_temp_low;
6495 tmp_stats[i++] = xstats->warn_laser_bias_current_high;
6496 tmp_stats[i++] = xstats->warn_laser_bias_current_low;
6497 tmp_stats[i++] = xstats->warn_laser_output_power_high;
6498 tmp_stats[i++] = xstats->warn_laser_output_power_low;
6499 tmp_stats[i++] = swstats->clubbed_frms_cnt;
6500 tmp_stats[i++] = swstats->sending_both;
6501 tmp_stats[i++] = swstats->outof_sequence_pkts;
6502 tmp_stats[i++] = swstats->flush_max_pkts;
6503 if (swstats->num_aggregations) {
6504 u64 tmp = swstats->sum_avg_pkts_aggregated;
6505 int count = 0;
6506 /*
6507 * Since 64-bit divide does not work on all platforms,
6508 * do repeated subtraction.
6509 */
6510 while (tmp >= swstats->num_aggregations) {
6511 tmp -= swstats->num_aggregations;
6512 count++;
6513 }
6514 tmp_stats[i++] = count;
6515 } else
6516 tmp_stats[i++] = 0;
6517 tmp_stats[i++] = swstats->mem_alloc_fail_cnt;
6518 tmp_stats[i++] = swstats->pci_map_fail_cnt;
6519 tmp_stats[i++] = swstats->watchdog_timer_cnt;
6520 tmp_stats[i++] = swstats->mem_allocated;
6521 tmp_stats[i++] = swstats->mem_freed;
6522 tmp_stats[i++] = swstats->link_up_cnt;
6523 tmp_stats[i++] = swstats->link_down_cnt;
6524 tmp_stats[i++] = swstats->link_up_time;
6525 tmp_stats[i++] = swstats->link_down_time;
6526
6527 tmp_stats[i++] = swstats->tx_buf_abort_cnt;
6528 tmp_stats[i++] = swstats->tx_desc_abort_cnt;
6529 tmp_stats[i++] = swstats->tx_parity_err_cnt;
6530 tmp_stats[i++] = swstats->tx_link_loss_cnt;
6531 tmp_stats[i++] = swstats->tx_list_proc_err_cnt;
6532
6533 tmp_stats[i++] = swstats->rx_parity_err_cnt;
6534 tmp_stats[i++] = swstats->rx_abort_cnt;
6535 tmp_stats[i++] = swstats->rx_parity_abort_cnt;
6536 tmp_stats[i++] = swstats->rx_rda_fail_cnt;
6537 tmp_stats[i++] = swstats->rx_unkn_prot_cnt;
6538 tmp_stats[i++] = swstats->rx_fcs_err_cnt;
6539 tmp_stats[i++] = swstats->rx_buf_size_err_cnt;
6540 tmp_stats[i++] = swstats->rx_rxd_corrupt_cnt;
6541 tmp_stats[i++] = swstats->rx_unkn_err_cnt;
6542 tmp_stats[i++] = swstats->tda_err_cnt;
6543 tmp_stats[i++] = swstats->pfc_err_cnt;
6544 tmp_stats[i++] = swstats->pcc_err_cnt;
6545 tmp_stats[i++] = swstats->tti_err_cnt;
6546 tmp_stats[i++] = swstats->tpa_err_cnt;
6547 tmp_stats[i++] = swstats->sm_err_cnt;
6548 tmp_stats[i++] = swstats->lso_err_cnt;
6549 tmp_stats[i++] = swstats->mac_tmac_err_cnt;
6550 tmp_stats[i++] = swstats->mac_rmac_err_cnt;
6551 tmp_stats[i++] = swstats->xgxs_txgxs_err_cnt;
6552 tmp_stats[i++] = swstats->xgxs_rxgxs_err_cnt;
6553 tmp_stats[i++] = swstats->rc_err_cnt;
6554 tmp_stats[i++] = swstats->prc_pcix_err_cnt;
6555 tmp_stats[i++] = swstats->rpa_err_cnt;
6556 tmp_stats[i++] = swstats->rda_err_cnt;
6557 tmp_stats[i++] = swstats->rti_err_cnt;
6558 tmp_stats[i++] = swstats->mc_err_cnt;
6559 }
6560
6561 static int s2io_ethtool_get_regs_len(struct net_device *dev)
6562 {
6563 return XENA_REG_SPACE;
6564 }
6565
6566
6567 static int s2io_get_eeprom_len(struct net_device *dev)
6568 {
6569 return XENA_EEPROM_SPACE;
6570 }
6571
6572 static int s2io_get_sset_count(struct net_device *dev, int sset)
6573 {
6574 struct s2io_nic *sp = netdev_priv(dev);
6575
6576 switch (sset) {
6577 case ETH_SS_TEST:
6578 return S2IO_TEST_LEN;
6579 case ETH_SS_STATS:
6580 switch (sp->device_type) {
6581 case XFRAME_I_DEVICE:
6582 return XFRAME_I_STAT_LEN;
6583 case XFRAME_II_DEVICE:
6584 return XFRAME_II_STAT_LEN;
6585 default:
6586 return 0;
6587 }
6588 default:
6589 return -EOPNOTSUPP;
6590 }
6591 }
6592
6593 static void s2io_ethtool_get_strings(struct net_device *dev,
6594 u32 stringset, u8 *data)
6595 {
6596 int stat_size = 0;
6597 struct s2io_nic *sp = netdev_priv(dev);
6598
6599 switch (stringset) {
6600 case ETH_SS_TEST:
6601 memcpy(data, s2io_gstrings, S2IO_STRINGS_LEN);
6602 break;
6603 case ETH_SS_STATS:
6604 stat_size = sizeof(ethtool_xena_stats_keys);
6605 memcpy(data, &ethtool_xena_stats_keys, stat_size);
6606 if (sp->device_type == XFRAME_II_DEVICE) {
6607 memcpy(data + stat_size,
6608 &ethtool_enhanced_stats_keys,
6609 sizeof(ethtool_enhanced_stats_keys));
6610 stat_size += sizeof(ethtool_enhanced_stats_keys);
6611 }
6612
6613 memcpy(data + stat_size, &ethtool_driver_stats_keys,
6614 sizeof(ethtool_driver_stats_keys));
6615 }
6616 }
6617
6618 static int s2io_set_features(struct net_device *dev, netdev_features_t features)
6619 {
6620 struct s2io_nic *sp = netdev_priv(dev);
6621 netdev_features_t changed = (features ^ dev->features) & NETIF_F_LRO;
6622
6623 if (changed && netif_running(dev)) {
6624 int rc;
6625
6626 s2io_stop_all_tx_queue(sp);
6627 s2io_card_down(sp);
6628 dev->features = features;
6629 rc = s2io_card_up(sp);
6630 if (rc)
6631 s2io_reset(sp);
6632 else
6633 s2io_start_all_tx_queue(sp);
6634
6635 return rc ? rc : 1;
6636 }
6637
6638 return 0;
6639 }
6640
6641 static const struct ethtool_ops netdev_ethtool_ops = {
6642 .get_settings = s2io_ethtool_gset,
6643 .set_settings = s2io_ethtool_sset,
6644 .get_drvinfo = s2io_ethtool_gdrvinfo,
6645 .get_regs_len = s2io_ethtool_get_regs_len,
6646 .get_regs = s2io_ethtool_gregs,
6647 .get_link = ethtool_op_get_link,
6648 .get_eeprom_len = s2io_get_eeprom_len,
6649 .get_eeprom = s2io_ethtool_geeprom,
6650 .set_eeprom = s2io_ethtool_seeprom,
6651 .get_ringparam = s2io_ethtool_gringparam,
6652 .get_pauseparam = s2io_ethtool_getpause_data,
6653 .set_pauseparam = s2io_ethtool_setpause_data,
6654 .self_test = s2io_ethtool_test,
6655 .get_strings = s2io_ethtool_get_strings,
6656 .set_phys_id = s2io_ethtool_set_led,
6657 .get_ethtool_stats = s2io_get_ethtool_stats,
6658 .get_sset_count = s2io_get_sset_count,
6659 };
6660
6661 /**
6662 * s2io_ioctl - Entry point for the Ioctl
6663 * @dev : Device pointer.
6664 * @ifr : An IOCTL specefic structure, that can contain a pointer to
6665 * a proprietary structure used to pass information to the driver.
6666 * @cmd : This is used to distinguish between the different commands that
6667 * can be passed to the IOCTL functions.
6668 * Description:
6669 * Currently there are no special functionality supported in IOCTL, hence
6670 * function always return EOPNOTSUPPORTED
6671 */
6672
6673 static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
6674 {
6675 return -EOPNOTSUPP;
6676 }
6677
6678 /**
6679 * s2io_change_mtu - entry point to change MTU size for the device.
6680 * @dev : device pointer.
6681 * @new_mtu : the new MTU size for the device.
6682 * Description: A driver entry point to change MTU size for the device.
6683 * Before changing the MTU the device must be stopped.
6684 * Return value:
6685 * 0 on success and an appropriate (-)ve integer as defined in errno.h
6686 * file on failure.
6687 */
6688
6689 static int s2io_change_mtu(struct net_device *dev, int new_mtu)
6690 {
6691 struct s2io_nic *sp = netdev_priv(dev);
6692 int ret = 0;
6693
6694 if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
6695 DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n", dev->name);
6696 return -EPERM;
6697 }
6698
6699 dev->mtu = new_mtu;
6700 if (netif_running(dev)) {
6701 s2io_stop_all_tx_queue(sp);
6702 s2io_card_down(sp);
6703 ret = s2io_card_up(sp);
6704 if (ret) {
6705 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
6706 __func__);
6707 return ret;
6708 }
6709 s2io_wake_all_tx_queue(sp);
6710 } else { /* Device is down */
6711 struct XENA_dev_config __iomem *bar0 = sp->bar0;
6712 u64 val64 = new_mtu;
6713
6714 writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
6715 }
6716
6717 return ret;
6718 }
6719
6720 /**
6721 * s2io_set_link - Set the LInk status
6722 * @data: long pointer to device private structue
6723 * Description: Sets the link status for the adapter
6724 */
6725
6726 static void s2io_set_link(struct work_struct *work)
6727 {
6728 struct s2io_nic *nic = container_of(work, struct s2io_nic,
6729 set_link_task);
6730 struct net_device *dev = nic->dev;
6731 struct XENA_dev_config __iomem *bar0 = nic->bar0;
6732 register u64 val64;
6733 u16 subid;
6734
6735 rtnl_lock();
6736
6737 if (!netif_running(dev))
6738 goto out_unlock;
6739
6740 if (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(nic->state))) {
6741 /* The card is being reset, no point doing anything */
6742 goto out_unlock;
6743 }
6744
6745 subid = nic->pdev->subsystem_device;
6746 if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
6747 /*
6748 * Allow a small delay for the NICs self initiated
6749 * cleanup to complete.
6750 */
6751 msleep(100);
6752 }
6753
6754 val64 = readq(&bar0->adapter_status);
6755 if (LINK_IS_UP(val64)) {
6756 if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
6757 if (verify_xena_quiescence(nic)) {
6758 val64 = readq(&bar0->adapter_control);
6759 val64 |= ADAPTER_CNTL_EN;
6760 writeq(val64, &bar0->adapter_control);
6761 if (CARDS_WITH_FAULTY_LINK_INDICATORS(
6762 nic->device_type, subid)) {
6763 val64 = readq(&bar0->gpio_control);
6764 val64 |= GPIO_CTRL_GPIO_0;
6765 writeq(val64, &bar0->gpio_control);
6766 val64 = readq(&bar0->gpio_control);
6767 } else {
6768 val64 |= ADAPTER_LED_ON;
6769 writeq(val64, &bar0->adapter_control);
6770 }
6771 nic->device_enabled_once = true;
6772 } else {
6773 DBG_PRINT(ERR_DBG,
6774 "%s: Error: device is not Quiescent\n",
6775 dev->name);
6776 s2io_stop_all_tx_queue(nic);
6777 }
6778 }
6779 val64 = readq(&bar0->adapter_control);
6780 val64 |= ADAPTER_LED_ON;
6781 writeq(val64, &bar0->adapter_control);
6782 s2io_link(nic, LINK_UP);
6783 } else {
6784 if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
6785 subid)) {
6786 val64 = readq(&bar0->gpio_control);
6787 val64 &= ~GPIO_CTRL_GPIO_0;
6788 writeq(val64, &bar0->gpio_control);
6789 val64 = readq(&bar0->gpio_control);
6790 }
6791 /* turn off LED */
6792 val64 = readq(&bar0->adapter_control);
6793 val64 = val64 & (~ADAPTER_LED_ON);
6794 writeq(val64, &bar0->adapter_control);
6795 s2io_link(nic, LINK_DOWN);
6796 }
6797 clear_bit(__S2IO_STATE_LINK_TASK, &(nic->state));
6798
6799 out_unlock:
6800 rtnl_unlock();
6801 }
6802
6803 static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
6804 struct buffAdd *ba,
6805 struct sk_buff **skb, u64 *temp0, u64 *temp1,
6806 u64 *temp2, int size)
6807 {
6808 struct net_device *dev = sp->dev;
6809 struct swStat *stats = &sp->mac_control.stats_info->sw_stat;
6810
6811 if ((sp->rxd_mode == RXD_MODE_1) && (rxdp->Host_Control == 0)) {
6812 struct RxD1 *rxdp1 = (struct RxD1 *)rxdp;
6813 /* allocate skb */
6814 if (*skb) {
6815 DBG_PRINT(INFO_DBG, "SKB is not NULL\n");
6816 /*
6817 * As Rx frame are not going to be processed,
6818 * using same mapped address for the Rxd
6819 * buffer pointer
6820 */
6821 rxdp1->Buffer0_ptr = *temp0;
6822 } else {
6823 *skb = dev_alloc_skb(size);
6824 if (!(*skb)) {
6825 DBG_PRINT(INFO_DBG,
6826 "%s: Out of memory to allocate %s\n",
6827 dev->name, "1 buf mode SKBs");
6828 stats->mem_alloc_fail_cnt++;
6829 return -ENOMEM ;
6830 }
6831 stats->mem_allocated += (*skb)->truesize;
6832 /* storing the mapped addr in a temp variable
6833 * such it will be used for next rxd whose
6834 * Host Control is NULL
6835 */
6836 rxdp1->Buffer0_ptr = *temp0 =
6837 pci_map_single(sp->pdev, (*skb)->data,
6838 size - NET_IP_ALIGN,
6839 PCI_DMA_FROMDEVICE);
6840 if (pci_dma_mapping_error(sp->pdev, rxdp1->Buffer0_ptr))
6841 goto memalloc_failed;
6842 rxdp->Host_Control = (unsigned long) (*skb);
6843 }
6844 } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
6845 struct RxD3 *rxdp3 = (struct RxD3 *)rxdp;
6846 /* Two buffer Mode */
6847 if (*skb) {
6848 rxdp3->Buffer2_ptr = *temp2;
6849 rxdp3->Buffer0_ptr = *temp0;
6850 rxdp3->Buffer1_ptr = *temp1;
6851 } else {
6852 *skb = dev_alloc_skb(size);
6853 if (!(*skb)) {
6854 DBG_PRINT(INFO_DBG,
6855 "%s: Out of memory to allocate %s\n",
6856 dev->name,
6857 "2 buf mode SKBs");
6858 stats->mem_alloc_fail_cnt++;
6859 return -ENOMEM;
6860 }
6861 stats->mem_allocated += (*skb)->truesize;
6862 rxdp3->Buffer2_ptr = *temp2 =
6863 pci_map_single(sp->pdev, (*skb)->data,
6864 dev->mtu + 4,
6865 PCI_DMA_FROMDEVICE);
6866 if (pci_dma_mapping_error(sp->pdev, rxdp3->Buffer2_ptr))
6867 goto memalloc_failed;
6868 rxdp3->Buffer0_ptr = *temp0 =
6869 pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
6870 PCI_DMA_FROMDEVICE);
6871 if (pci_dma_mapping_error(sp->pdev,
6872 rxdp3->Buffer0_ptr)) {
6873 pci_unmap_single(sp->pdev,
6874 (dma_addr_t)rxdp3->Buffer2_ptr,
6875 dev->mtu + 4,
6876 PCI_DMA_FROMDEVICE);
6877 goto memalloc_failed;
6878 }
6879 rxdp->Host_Control = (unsigned long) (*skb);
6880
6881 /* Buffer-1 will be dummy buffer not used */
6882 rxdp3->Buffer1_ptr = *temp1 =
6883 pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
6884 PCI_DMA_FROMDEVICE);
6885 if (pci_dma_mapping_error(sp->pdev,
6886 rxdp3->Buffer1_ptr)) {
6887 pci_unmap_single(sp->pdev,
6888 (dma_addr_t)rxdp3->Buffer0_ptr,
6889 BUF0_LEN, PCI_DMA_FROMDEVICE);
6890 pci_unmap_single(sp->pdev,
6891 (dma_addr_t)rxdp3->Buffer2_ptr,
6892 dev->mtu + 4,
6893 PCI_DMA_FROMDEVICE);
6894 goto memalloc_failed;
6895 }
6896 }
6897 }
6898 return 0;
6899
6900 memalloc_failed:
6901 stats->pci_map_fail_cnt++;
6902 stats->mem_freed += (*skb)->truesize;
6903 dev_kfree_skb(*skb);
6904 return -ENOMEM;
6905 }
6906
6907 static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
6908 int size)
6909 {
6910 struct net_device *dev = sp->dev;
6911 if (sp->rxd_mode == RXD_MODE_1) {
6912 rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
6913 } else if (sp->rxd_mode == RXD_MODE_3B) {
6914 rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
6915 rxdp->Control_2 |= SET_BUFFER1_SIZE_3(1);
6916 rxdp->Control_2 |= SET_BUFFER2_SIZE_3(dev->mtu + 4);
6917 }
6918 }
6919
6920 static int rxd_owner_bit_reset(struct s2io_nic *sp)
6921 {
6922 int i, j, k, blk_cnt = 0, size;
6923 struct config_param *config = &sp->config;
6924 struct mac_info *mac_control = &sp->mac_control;
6925 struct net_device *dev = sp->dev;
6926 struct RxD_t *rxdp = NULL;
6927 struct sk_buff *skb = NULL;
6928 struct buffAdd *ba = NULL;
6929 u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
6930
6931 /* Calculate the size based on ring mode */
6932 size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
6933 HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
6934 if (sp->rxd_mode == RXD_MODE_1)
6935 size += NET_IP_ALIGN;
6936 else if (sp->rxd_mode == RXD_MODE_3B)
6937 size = dev->mtu + ALIGN_SIZE + BUF0_LEN + 4;
6938
6939 for (i = 0; i < config->rx_ring_num; i++) {
6940 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
6941 struct ring_info *ring = &mac_control->rings[i];
6942
6943 blk_cnt = rx_cfg->num_rxd / (rxd_count[sp->rxd_mode] + 1);
6944
6945 for (j = 0; j < blk_cnt; j++) {
6946 for (k = 0; k < rxd_count[sp->rxd_mode]; k++) {
6947 rxdp = ring->rx_blocks[j].rxds[k].virt_addr;
6948 if (sp->rxd_mode == RXD_MODE_3B)
6949 ba = &ring->ba[j][k];
6950 if (set_rxd_buffer_pointer(sp, rxdp, ba, &skb,
6951 (u64 *)&temp0_64,
6952 (u64 *)&temp1_64,
6953 (u64 *)&temp2_64,
6954 size) == -ENOMEM) {
6955 return 0;
6956 }
6957
6958 set_rxd_buffer_size(sp, rxdp, size);
6959 wmb();
6960 /* flip the Ownership bit to Hardware */
6961 rxdp->Control_1 |= RXD_OWN_XENA;
6962 }
6963 }
6964 }
6965 return 0;
6966
6967 }
6968
6969 static int s2io_add_isr(struct s2io_nic *sp)
6970 {
6971 int ret = 0;
6972 struct net_device *dev = sp->dev;
6973 int err = 0;
6974
6975 if (sp->config.intr_type == MSI_X)
6976 ret = s2io_enable_msi_x(sp);
6977 if (ret) {
6978 DBG_PRINT(ERR_DBG, "%s: Defaulting to INTA\n", dev->name);
6979 sp->config.intr_type = INTA;
6980 }
6981
6982 /*
6983 * Store the values of the MSIX table in
6984 * the struct s2io_nic structure
6985 */
6986 store_xmsi_data(sp);
6987
6988 /* After proper initialization of H/W, register ISR */
6989 if (sp->config.intr_type == MSI_X) {
6990 int i, msix_rx_cnt = 0;
6991
6992 for (i = 0; i < sp->num_entries; i++) {
6993 if (sp->s2io_entries[i].in_use == MSIX_FLG) {
6994 if (sp->s2io_entries[i].type ==
6995 MSIX_RING_TYPE) {
6996 sprintf(sp->desc[i], "%s:MSI-X-%d-RX",
6997 dev->name, i);
6998 err = request_irq(sp->entries[i].vector,
6999 s2io_msix_ring_handle,
7000 0,
7001 sp->desc[i],
7002 sp->s2io_entries[i].arg);
7003 } else if (sp->s2io_entries[i].type ==
7004 MSIX_ALARM_TYPE) {
7005 sprintf(sp->desc[i], "%s:MSI-X-%d-TX",
7006 dev->name, i);
7007 err = request_irq(sp->entries[i].vector,
7008 s2io_msix_fifo_handle,
7009 0,
7010 sp->desc[i],
7011 sp->s2io_entries[i].arg);
7012
7013 }
7014 /* if either data or addr is zero print it. */
7015 if (!(sp->msix_info[i].addr &&
7016 sp->msix_info[i].data)) {
7017 DBG_PRINT(ERR_DBG,
7018 "%s @Addr:0x%llx Data:0x%llx\n",
7019 sp->desc[i],
7020 (unsigned long long)
7021 sp->msix_info[i].addr,
7022 (unsigned long long)
7023 ntohl(sp->msix_info[i].data));
7024 } else
7025 msix_rx_cnt++;
7026 if (err) {
7027 remove_msix_isr(sp);
7028
7029 DBG_PRINT(ERR_DBG,
7030 "%s:MSI-X-%d registration "
7031 "failed\n", dev->name, i);
7032
7033 DBG_PRINT(ERR_DBG,
7034 "%s: Defaulting to INTA\n",
7035 dev->name);
7036 sp->config.intr_type = INTA;
7037 break;
7038 }
7039 sp->s2io_entries[i].in_use =
7040 MSIX_REGISTERED_SUCCESS;
7041 }
7042 }
7043 if (!err) {
7044 pr_info("MSI-X-RX %d entries enabled\n", --msix_rx_cnt);
7045 DBG_PRINT(INFO_DBG,
7046 "MSI-X-TX entries enabled through alarm vector\n");
7047 }
7048 }
7049 if (sp->config.intr_type == INTA) {
7050 err = request_irq((int)sp->pdev->irq, s2io_isr, IRQF_SHARED,
7051 sp->name, dev);
7052 if (err) {
7053 DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
7054 dev->name);
7055 return -1;
7056 }
7057 }
7058 return 0;
7059 }
7060
7061 static void s2io_rem_isr(struct s2io_nic *sp)
7062 {
7063 if (sp->config.intr_type == MSI_X)
7064 remove_msix_isr(sp);
7065 else
7066 remove_inta_isr(sp);
7067 }
7068
7069 static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
7070 {
7071 int cnt = 0;
7072 struct XENA_dev_config __iomem *bar0 = sp->bar0;
7073 register u64 val64 = 0;
7074 struct config_param *config;
7075 config = &sp->config;
7076
7077 if (!is_s2io_card_up(sp))
7078 return;
7079
7080 del_timer_sync(&sp->alarm_timer);
7081 /* If s2io_set_link task is executing, wait till it completes. */
7082 while (test_and_set_bit(__S2IO_STATE_LINK_TASK, &(sp->state)))
7083 msleep(50);
7084 clear_bit(__S2IO_STATE_CARD_UP, &sp->state);
7085
7086 /* Disable napi */
7087 if (sp->config.napi) {
7088 int off = 0;
7089 if (config->intr_type == MSI_X) {
7090 for (; off < sp->config.rx_ring_num; off++)
7091 napi_disable(&sp->mac_control.rings[off].napi);
7092 }
7093 else
7094 napi_disable(&sp->napi);
7095 }
7096
7097 /* disable Tx and Rx traffic on the NIC */
7098 if (do_io)
7099 stop_nic(sp);
7100
7101 s2io_rem_isr(sp);
7102
7103 /* stop the tx queue, indicate link down */
7104 s2io_link(sp, LINK_DOWN);
7105
7106 /* Check if the device is Quiescent and then Reset the NIC */
7107 while (do_io) {
7108 /* As per the HW requirement we need to replenish the
7109 * receive buffer to avoid the ring bump. Since there is
7110 * no intention of processing the Rx frame at this pointwe are
7111 * just setting the ownership bit of rxd in Each Rx
7112 * ring to HW and set the appropriate buffer size
7113 * based on the ring mode
7114 */
7115 rxd_owner_bit_reset(sp);
7116
7117 val64 = readq(&bar0->adapter_status);
7118 if (verify_xena_quiescence(sp)) {
7119 if (verify_pcc_quiescent(sp, sp->device_enabled_once))
7120 break;
7121 }
7122
7123 msleep(50);
7124 cnt++;
7125 if (cnt == 10) {
7126 DBG_PRINT(ERR_DBG, "Device not Quiescent - "
7127 "adapter status reads 0x%llx\n",
7128 (unsigned long long)val64);
7129 break;
7130 }
7131 }
7132 if (do_io)
7133 s2io_reset(sp);
7134
7135 /* Free all Tx buffers */
7136 free_tx_buffers(sp);
7137
7138 /* Free all Rx buffers */
7139 free_rx_buffers(sp);
7140
7141 clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
7142 }
7143
7144 static void s2io_card_down(struct s2io_nic *sp)
7145 {
7146 do_s2io_card_down(sp, 1);
7147 }
7148
7149 static int s2io_card_up(struct s2io_nic *sp)
7150 {
7151 int i, ret = 0;
7152 struct config_param *config;
7153 struct mac_info *mac_control;
7154 struct net_device *dev = (struct net_device *)sp->dev;
7155 u16 interruptible;
7156
7157 /* Initialize the H/W I/O registers */
7158 ret = init_nic(sp);
7159 if (ret != 0) {
7160 DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
7161 dev->name);
7162 if (ret != -EIO)
7163 s2io_reset(sp);
7164 return ret;
7165 }
7166
7167 /*
7168 * Initializing the Rx buffers. For now we are considering only 1
7169 * Rx ring and initializing buffers into 30 Rx blocks
7170 */
7171 config = &sp->config;
7172 mac_control = &sp->mac_control;
7173
7174 for (i = 0; i < config->rx_ring_num; i++) {
7175 struct ring_info *ring = &mac_control->rings[i];
7176
7177 ring->mtu = dev->mtu;
7178 ring->lro = !!(dev->features & NETIF_F_LRO);
7179 ret = fill_rx_buffers(sp, ring, 1);
7180 if (ret) {
7181 DBG_PRINT(ERR_DBG, "%s: Out of memory in Open\n",
7182 dev->name);
7183 s2io_reset(sp);
7184 free_rx_buffers(sp);
7185 return -ENOMEM;
7186 }
7187 DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
7188 ring->rx_bufs_left);
7189 }
7190
7191 /* Initialise napi */
7192 if (config->napi) {
7193 if (config->intr_type == MSI_X) {
7194 for (i = 0; i < sp->config.rx_ring_num; i++)
7195 napi_enable(&sp->mac_control.rings[i].napi);
7196 } else {
7197 napi_enable(&sp->napi);
7198 }
7199 }
7200
7201 /* Maintain the state prior to the open */
7202 if (sp->promisc_flg)
7203 sp->promisc_flg = 0;
7204 if (sp->m_cast_flg) {
7205 sp->m_cast_flg = 0;
7206 sp->all_multi_pos = 0;
7207 }
7208
7209 /* Setting its receive mode */
7210 s2io_set_multicast(dev);
7211
7212 if (dev->features & NETIF_F_LRO) {
7213 /* Initialize max aggregatable pkts per session based on MTU */
7214 sp->lro_max_aggr_per_sess = ((1<<16) - 1) / dev->mtu;
7215 /* Check if we can use (if specified) user provided value */
7216 if (lro_max_pkts < sp->lro_max_aggr_per_sess)
7217 sp->lro_max_aggr_per_sess = lro_max_pkts;
7218 }
7219
7220 /* Enable Rx Traffic and interrupts on the NIC */
7221 if (start_nic(sp)) {
7222 DBG_PRINT(ERR_DBG, "%s: Starting NIC failed\n", dev->name);
7223 s2io_reset(sp);
7224 free_rx_buffers(sp);
7225 return -ENODEV;
7226 }
7227
7228 /* Add interrupt service routine */
7229 if (s2io_add_isr(sp) != 0) {
7230 if (sp->config.intr_type == MSI_X)
7231 s2io_rem_isr(sp);
7232 s2io_reset(sp);
7233 free_rx_buffers(sp);
7234 return -ENODEV;
7235 }
7236
7237 S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
7238
7239 set_bit(__S2IO_STATE_CARD_UP, &sp->state);
7240
7241 /* Enable select interrupts */
7242 en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
7243 if (sp->config.intr_type != INTA) {
7244 interruptible = TX_TRAFFIC_INTR | TX_PIC_INTR;
7245 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7246 } else {
7247 interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
7248 interruptible |= TX_PIC_INTR;
7249 en_dis_able_nic_intrs(sp, interruptible, ENABLE_INTRS);
7250 }
7251
7252 return 0;
7253 }
7254
7255 /**
7256 * s2io_restart_nic - Resets the NIC.
7257 * @data : long pointer to the device private structure
7258 * Description:
7259 * This function is scheduled to be run by the s2io_tx_watchdog
7260 * function after 0.5 secs to reset the NIC. The idea is to reduce
7261 * the run time of the watch dog routine which is run holding a
7262 * spin lock.
7263 */
7264
7265 static void s2io_restart_nic(struct work_struct *work)
7266 {
7267 struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
7268 struct net_device *dev = sp->dev;
7269
7270 rtnl_lock();
7271
7272 if (!netif_running(dev))
7273 goto out_unlock;
7274
7275 s2io_card_down(sp);
7276 if (s2io_card_up(sp)) {
7277 DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n", dev->name);
7278 }
7279 s2io_wake_all_tx_queue(sp);
7280 DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n", dev->name);
7281 out_unlock:
7282 rtnl_unlock();
7283 }
7284
7285 /**
7286 * s2io_tx_watchdog - Watchdog for transmit side.
7287 * @dev : Pointer to net device structure
7288 * Description:
7289 * This function is triggered if the Tx Queue is stopped
7290 * for a pre-defined amount of time when the Interface is still up.
7291 * If the Interface is jammed in such a situation, the hardware is
7292 * reset (by s2io_close) and restarted again (by s2io_open) to
7293 * overcome any problem that might have been caused in the hardware.
7294 * Return value:
7295 * void
7296 */
7297
7298 static void s2io_tx_watchdog(struct net_device *dev)
7299 {
7300 struct s2io_nic *sp = netdev_priv(dev);
7301 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
7302
7303 if (netif_carrier_ok(dev)) {
7304 swstats->watchdog_timer_cnt++;
7305 schedule_work(&sp->rst_timer_task);
7306 swstats->soft_reset_cnt++;
7307 }
7308 }
7309
7310 /**
7311 * rx_osm_handler - To perform some OS related operations on SKB.
7312 * @sp: private member of the device structure,pointer to s2io_nic structure.
7313 * @skb : the socket buffer pointer.
7314 * @len : length of the packet
7315 * @cksum : FCS checksum of the frame.
7316 * @ring_no : the ring from which this RxD was extracted.
7317 * Description:
7318 * This function is called by the Rx interrupt serivce routine to perform
7319 * some OS related operations on the SKB before passing it to the upper
7320 * layers. It mainly checks if the checksum is OK, if so adds it to the
7321 * SKBs cksum variable, increments the Rx packet count and passes the SKB
7322 * to the upper layer. If the checksum is wrong, it increments the Rx
7323 * packet error count, frees the SKB and returns error.
7324 * Return value:
7325 * SUCCESS on success and -1 on failure.
7326 */
7327 static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
7328 {
7329 struct s2io_nic *sp = ring_data->nic;
7330 struct net_device *dev = (struct net_device *)ring_data->dev;
7331 struct sk_buff *skb = (struct sk_buff *)
7332 ((unsigned long)rxdp->Host_Control);
7333 int ring_no = ring_data->ring_no;
7334 u16 l3_csum, l4_csum;
7335 unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
7336 struct lro *uninitialized_var(lro);
7337 u8 err_mask;
7338 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
7339
7340 skb->dev = dev;
7341
7342 if (err) {
7343 /* Check for parity error */
7344 if (err & 0x1)
7345 swstats->parity_err_cnt++;
7346
7347 err_mask = err >> 48;
7348 switch (err_mask) {
7349 case 1:
7350 swstats->rx_parity_err_cnt++;
7351 break;
7352
7353 case 2:
7354 swstats->rx_abort_cnt++;
7355 break;
7356
7357 case 3:
7358 swstats->rx_parity_abort_cnt++;
7359 break;
7360
7361 case 4:
7362 swstats->rx_rda_fail_cnt++;
7363 break;
7364
7365 case 5:
7366 swstats->rx_unkn_prot_cnt++;
7367 break;
7368
7369 case 6:
7370 swstats->rx_fcs_err_cnt++;
7371 break;
7372
7373 case 7:
7374 swstats->rx_buf_size_err_cnt++;
7375 break;
7376
7377 case 8:
7378 swstats->rx_rxd_corrupt_cnt++;
7379 break;
7380
7381 case 15:
7382 swstats->rx_unkn_err_cnt++;
7383 break;
7384 }
7385 /*
7386 * Drop the packet if bad transfer code. Exception being
7387 * 0x5, which could be due to unsupported IPv6 extension header.
7388 * In this case, we let stack handle the packet.
7389 * Note that in this case, since checksum will be incorrect,
7390 * stack will validate the same.
7391 */
7392 if (err_mask != 0x5) {
7393 DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%x\n",
7394 dev->name, err_mask);
7395 dev->stats.rx_crc_errors++;
7396 swstats->mem_freed
7397 += skb->truesize;
7398 dev_kfree_skb(skb);
7399 ring_data->rx_bufs_left -= 1;
7400 rxdp->Host_Control = 0;
7401 return 0;
7402 }
7403 }
7404
7405 rxdp->Host_Control = 0;
7406 if (sp->rxd_mode == RXD_MODE_1) {
7407 int len = RXD_GET_BUFFER0_SIZE_1(rxdp->Control_2);
7408
7409 skb_put(skb, len);
7410 } else if (sp->rxd_mode == RXD_MODE_3B) {
7411 int get_block = ring_data->rx_curr_get_info.block_index;
7412 int get_off = ring_data->rx_curr_get_info.offset;
7413 int buf0_len = RXD_GET_BUFFER0_SIZE_3(rxdp->Control_2);
7414 int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
7415 unsigned char *buff = skb_push(skb, buf0_len);
7416
7417 struct buffAdd *ba = &ring_data->ba[get_block][get_off];
7418 memcpy(buff, ba->ba_0, buf0_len);
7419 skb_put(skb, buf2_len);
7420 }
7421
7422 if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
7423 ((!ring_data->lro) ||
7424 (ring_data->lro && (!(rxdp->Control_1 & RXD_FRAME_IP_FRAG)))) &&
7425 (dev->features & NETIF_F_RXCSUM)) {
7426 l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
7427 l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
7428 if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
7429 /*
7430 * NIC verifies if the Checksum of the received
7431 * frame is Ok or not and accordingly returns
7432 * a flag in the RxD.
7433 */
7434 skb->ip_summed = CHECKSUM_UNNECESSARY;
7435 if (ring_data->lro) {
7436 u32 tcp_len = 0;
7437 u8 *tcp;
7438 int ret = 0;
7439
7440 ret = s2io_club_tcp_session(ring_data,
7441 skb->data, &tcp,
7442 &tcp_len, &lro,
7443 rxdp, sp);
7444 switch (ret) {
7445 case 3: /* Begin anew */
7446 lro->parent = skb;
7447 goto aggregate;
7448 case 1: /* Aggregate */
7449 lro_append_pkt(sp, lro, skb, tcp_len);
7450 goto aggregate;
7451 case 4: /* Flush session */
7452 lro_append_pkt(sp, lro, skb, tcp_len);
7453 queue_rx_frame(lro->parent,
7454 lro->vlan_tag);
7455 clear_lro_session(lro);
7456 swstats->flush_max_pkts++;
7457 goto aggregate;
7458 case 2: /* Flush both */
7459 lro->parent->data_len = lro->frags_len;
7460 swstats->sending_both++;
7461 queue_rx_frame(lro->parent,
7462 lro->vlan_tag);
7463 clear_lro_session(lro);
7464 goto send_up;
7465 case 0: /* sessions exceeded */
7466 case -1: /* non-TCP or not L2 aggregatable */
7467 case 5: /*
7468 * First pkt in session not
7469 * L3/L4 aggregatable
7470 */
7471 break;
7472 default:
7473 DBG_PRINT(ERR_DBG,
7474 "%s: Samadhana!!\n",
7475 __func__);
7476 BUG();
7477 }
7478 }
7479 } else {
7480 /*
7481 * Packet with erroneous checksum, let the
7482 * upper layers deal with it.
7483 */
7484 skb_checksum_none_assert(skb);
7485 }
7486 } else
7487 skb_checksum_none_assert(skb);
7488
7489 swstats->mem_freed += skb->truesize;
7490 send_up:
7491 skb_record_rx_queue(skb, ring_no);
7492 queue_rx_frame(skb, RXD_GET_VLAN_TAG(rxdp->Control_2));
7493 aggregate:
7494 sp->mac_control.rings[ring_no].rx_bufs_left -= 1;
7495 return SUCCESS;
7496 }
7497
7498 /**
7499 * s2io_link - stops/starts the Tx queue.
7500 * @sp : private member of the device structure, which is a pointer to the
7501 * s2io_nic structure.
7502 * @link : inidicates whether link is UP/DOWN.
7503 * Description:
7504 * This function stops/starts the Tx queue depending on whether the link
7505 * status of the NIC is is down or up. This is called by the Alarm
7506 * interrupt handler whenever a link change interrupt comes up.
7507 * Return value:
7508 * void.
7509 */
7510
7511 static void s2io_link(struct s2io_nic *sp, int link)
7512 {
7513 struct net_device *dev = (struct net_device *)sp->dev;
7514 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
7515
7516 if (link != sp->last_link_state) {
7517 init_tti(sp, link);
7518 if (link == LINK_DOWN) {
7519 DBG_PRINT(ERR_DBG, "%s: Link down\n", dev->name);
7520 s2io_stop_all_tx_queue(sp);
7521 netif_carrier_off(dev);
7522 if (swstats->link_up_cnt)
7523 swstats->link_up_time =
7524 jiffies - sp->start_time;
7525 swstats->link_down_cnt++;
7526 } else {
7527 DBG_PRINT(ERR_DBG, "%s: Link Up\n", dev->name);
7528 if (swstats->link_down_cnt)
7529 swstats->link_down_time =
7530 jiffies - sp->start_time;
7531 swstats->link_up_cnt++;
7532 netif_carrier_on(dev);
7533 s2io_wake_all_tx_queue(sp);
7534 }
7535 }
7536 sp->last_link_state = link;
7537 sp->start_time = jiffies;
7538 }
7539
7540 /**
7541 * s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
7542 * @sp : private member of the device structure, which is a pointer to the
7543 * s2io_nic structure.
7544 * Description:
7545 * This function initializes a few of the PCI and PCI-X configuration registers
7546 * with recommended values.
7547 * Return value:
7548 * void
7549 */
7550
7551 static void s2io_init_pci(struct s2io_nic *sp)
7552 {
7553 u16 pci_cmd = 0, pcix_cmd = 0;
7554
7555 /* Enable Data Parity Error Recovery in PCI-X command register. */
7556 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7557 &(pcix_cmd));
7558 pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7559 (pcix_cmd | 1));
7560 pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
7561 &(pcix_cmd));
7562
7563 /* Set the PErr Response bit in PCI command register. */
7564 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7565 pci_write_config_word(sp->pdev, PCI_COMMAND,
7566 (pci_cmd | PCI_COMMAND_PARITY));
7567 pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
7568 }
7569
7570 static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type,
7571 u8 *dev_multiq)
7572 {
7573 int i;
7574
7575 if ((tx_fifo_num > MAX_TX_FIFOS) || (tx_fifo_num < 1)) {
7576 DBG_PRINT(ERR_DBG, "Requested number of tx fifos "
7577 "(%d) not supported\n", tx_fifo_num);
7578
7579 if (tx_fifo_num < 1)
7580 tx_fifo_num = 1;
7581 else
7582 tx_fifo_num = MAX_TX_FIFOS;
7583
7584 DBG_PRINT(ERR_DBG, "Default to %d tx fifos\n", tx_fifo_num);
7585 }
7586
7587 if (multiq)
7588 *dev_multiq = multiq;
7589
7590 if (tx_steering_type && (1 == tx_fifo_num)) {
7591 if (tx_steering_type != TX_DEFAULT_STEERING)
7592 DBG_PRINT(ERR_DBG,
7593 "Tx steering is not supported with "
7594 "one fifo. Disabling Tx steering.\n");
7595 tx_steering_type = NO_STEERING;
7596 }
7597
7598 if ((tx_steering_type < NO_STEERING) ||
7599 (tx_steering_type > TX_DEFAULT_STEERING)) {
7600 DBG_PRINT(ERR_DBG,
7601 "Requested transmit steering not supported\n");
7602 DBG_PRINT(ERR_DBG, "Disabling transmit steering\n");
7603 tx_steering_type = NO_STEERING;
7604 }
7605
7606 if (rx_ring_num > MAX_RX_RINGS) {
7607 DBG_PRINT(ERR_DBG,
7608 "Requested number of rx rings not supported\n");
7609 DBG_PRINT(ERR_DBG, "Default to %d rx rings\n",
7610 MAX_RX_RINGS);
7611 rx_ring_num = MAX_RX_RINGS;
7612 }
7613
7614 if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) {
7615 DBG_PRINT(ERR_DBG, "Wrong intr_type requested. "
7616 "Defaulting to INTA\n");
7617 *dev_intr_type = INTA;
7618 }
7619
7620 if ((*dev_intr_type == MSI_X) &&
7621 ((pdev->device != PCI_DEVICE_ID_HERC_WIN) &&
7622 (pdev->device != PCI_DEVICE_ID_HERC_UNI))) {
7623 DBG_PRINT(ERR_DBG, "Xframe I does not support MSI_X. "
7624 "Defaulting to INTA\n");
7625 *dev_intr_type = INTA;
7626 }
7627
7628 if ((rx_ring_mode != 1) && (rx_ring_mode != 2)) {
7629 DBG_PRINT(ERR_DBG, "Requested ring mode not supported\n");
7630 DBG_PRINT(ERR_DBG, "Defaulting to 1-buffer mode\n");
7631 rx_ring_mode = 1;
7632 }
7633
7634 for (i = 0; i < MAX_RX_RINGS; i++)
7635 if (rx_ring_sz[i] > MAX_RX_BLOCKS_PER_RING) {
7636 DBG_PRINT(ERR_DBG, "Requested rx ring size not "
7637 "supported\nDefaulting to %d\n",
7638 MAX_RX_BLOCKS_PER_RING);
7639 rx_ring_sz[i] = MAX_RX_BLOCKS_PER_RING;
7640 }
7641
7642 return SUCCESS;
7643 }
7644
7645 /**
7646 * rts_ds_steer - Receive traffic steering based on IPv4 or IPv6 TOS
7647 * or Traffic class respectively.
7648 * @nic: device private variable
7649 * Description: The function configures the receive steering to
7650 * desired receive ring.
7651 * Return Value: SUCCESS on success and
7652 * '-1' on failure (endian settings incorrect).
7653 */
7654 static int rts_ds_steer(struct s2io_nic *nic, u8 ds_codepoint, u8 ring)
7655 {
7656 struct XENA_dev_config __iomem *bar0 = nic->bar0;
7657 register u64 val64 = 0;
7658
7659 if (ds_codepoint > 63)
7660 return FAILURE;
7661
7662 val64 = RTS_DS_MEM_DATA(ring);
7663 writeq(val64, &bar0->rts_ds_mem_data);
7664
7665 val64 = RTS_DS_MEM_CTRL_WE |
7666 RTS_DS_MEM_CTRL_STROBE_NEW_CMD |
7667 RTS_DS_MEM_CTRL_OFFSET(ds_codepoint);
7668
7669 writeq(val64, &bar0->rts_ds_mem_ctrl);
7670
7671 return wait_for_cmd_complete(&bar0->rts_ds_mem_ctrl,
7672 RTS_DS_MEM_CTRL_STROBE_CMD_BEING_EXECUTED,
7673 S2IO_BIT_RESET);
7674 }
7675
7676 static const struct net_device_ops s2io_netdev_ops = {
7677 .ndo_open = s2io_open,
7678 .ndo_stop = s2io_close,
7679 .ndo_get_stats = s2io_get_stats,
7680 .ndo_start_xmit = s2io_xmit,
7681 .ndo_validate_addr = eth_validate_addr,
7682 .ndo_set_rx_mode = s2io_set_multicast,
7683 .ndo_do_ioctl = s2io_ioctl,
7684 .ndo_set_mac_address = s2io_set_mac_addr,
7685 .ndo_change_mtu = s2io_change_mtu,
7686 .ndo_set_features = s2io_set_features,
7687 .ndo_tx_timeout = s2io_tx_watchdog,
7688 #ifdef CONFIG_NET_POLL_CONTROLLER
7689 .ndo_poll_controller = s2io_netpoll,
7690 #endif
7691 };
7692
7693 /**
7694 * s2io_init_nic - Initialization of the adapter .
7695 * @pdev : structure containing the PCI related information of the device.
7696 * @pre: List of PCI devices supported by the driver listed in s2io_tbl.
7697 * Description:
7698 * The function initializes an adapter identified by the pci_dec structure.
7699 * All OS related initialization including memory and device structure and
7700 * initlaization of the device private variable is done. Also the swapper
7701 * control register is initialized to enable read and write into the I/O
7702 * registers of the device.
7703 * Return value:
7704 * returns 0 on success and negative on failure.
7705 */
7706
7707 static int __devinit
7708 s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
7709 {
7710 struct s2io_nic *sp;
7711 struct net_device *dev;
7712 int i, j, ret;
7713 int dma_flag = false;
7714 u32 mac_up, mac_down;
7715 u64 val64 = 0, tmp64 = 0;
7716 struct XENA_dev_config __iomem *bar0 = NULL;
7717 u16 subid;
7718 struct config_param *config;
7719 struct mac_info *mac_control;
7720 int mode;
7721 u8 dev_intr_type = intr_type;
7722 u8 dev_multiq = 0;
7723
7724 ret = s2io_verify_parm(pdev, &dev_intr_type, &dev_multiq);
7725 if (ret)
7726 return ret;
7727
7728 ret = pci_enable_device(pdev);
7729 if (ret) {
7730 DBG_PRINT(ERR_DBG,
7731 "%s: pci_enable_device failed\n", __func__);
7732 return ret;
7733 }
7734
7735 if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(64))) {
7736 DBG_PRINT(INIT_DBG, "%s: Using 64bit DMA\n", __func__);
7737 dma_flag = true;
7738 if (pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64))) {
7739 DBG_PRINT(ERR_DBG,
7740 "Unable to obtain 64bit DMA "
7741 "for consistent allocations\n");
7742 pci_disable_device(pdev);
7743 return -ENOMEM;
7744 }
7745 } else if (!pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
7746 DBG_PRINT(INIT_DBG, "%s: Using 32bit DMA\n", __func__);
7747 } else {
7748 pci_disable_device(pdev);
7749 return -ENOMEM;
7750 }
7751 ret = pci_request_regions(pdev, s2io_driver_name);
7752 if (ret) {
7753 DBG_PRINT(ERR_DBG, "%s: Request Regions failed - %x\n",
7754 __func__, ret);
7755 pci_disable_device(pdev);
7756 return -ENODEV;
7757 }
7758 if (dev_multiq)
7759 dev = alloc_etherdev_mq(sizeof(struct s2io_nic), tx_fifo_num);
7760 else
7761 dev = alloc_etherdev(sizeof(struct s2io_nic));
7762 if (dev == NULL) {
7763 DBG_PRINT(ERR_DBG, "Device allocation failed\n");
7764 pci_disable_device(pdev);
7765 pci_release_regions(pdev);
7766 return -ENODEV;
7767 }
7768
7769 pci_set_master(pdev);
7770 pci_set_drvdata(pdev, dev);
7771 SET_NETDEV_DEV(dev, &pdev->dev);
7772
7773 /* Private member variable initialized to s2io NIC structure */
7774 sp = netdev_priv(dev);
7775 sp->dev = dev;
7776 sp->pdev = pdev;
7777 sp->high_dma_flag = dma_flag;
7778 sp->device_enabled_once = false;
7779 if (rx_ring_mode == 1)
7780 sp->rxd_mode = RXD_MODE_1;
7781 if (rx_ring_mode == 2)
7782 sp->rxd_mode = RXD_MODE_3B;
7783
7784 sp->config.intr_type = dev_intr_type;
7785
7786 if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
7787 (pdev->device == PCI_DEVICE_ID_HERC_UNI))
7788 sp->device_type = XFRAME_II_DEVICE;
7789 else
7790 sp->device_type = XFRAME_I_DEVICE;
7791
7792
7793 /* Initialize some PCI/PCI-X fields of the NIC. */
7794 s2io_init_pci(sp);
7795
7796 /*
7797 * Setting the device configuration parameters.
7798 * Most of these parameters can be specified by the user during
7799 * module insertion as they are module loadable parameters. If
7800 * these parameters are not not specified during load time, they
7801 * are initialized with default values.
7802 */
7803 config = &sp->config;
7804 mac_control = &sp->mac_control;
7805
7806 config->napi = napi;
7807 config->tx_steering_type = tx_steering_type;
7808
7809 /* Tx side parameters. */
7810 if (config->tx_steering_type == TX_PRIORITY_STEERING)
7811 config->tx_fifo_num = MAX_TX_FIFOS;
7812 else
7813 config->tx_fifo_num = tx_fifo_num;
7814
7815 /* Initialize the fifos used for tx steering */
7816 if (config->tx_fifo_num < 5) {
7817 if (config->tx_fifo_num == 1)
7818 sp->total_tcp_fifos = 1;
7819 else
7820 sp->total_tcp_fifos = config->tx_fifo_num - 1;
7821 sp->udp_fifo_idx = config->tx_fifo_num - 1;
7822 sp->total_udp_fifos = 1;
7823 sp->other_fifo_idx = sp->total_tcp_fifos - 1;
7824 } else {
7825 sp->total_tcp_fifos = (tx_fifo_num - FIFO_UDP_MAX_NUM -
7826 FIFO_OTHER_MAX_NUM);
7827 sp->udp_fifo_idx = sp->total_tcp_fifos;
7828 sp->total_udp_fifos = FIFO_UDP_MAX_NUM;
7829 sp->other_fifo_idx = sp->udp_fifo_idx + FIFO_UDP_MAX_NUM;
7830 }
7831
7832 config->multiq = dev_multiq;
7833 for (i = 0; i < config->tx_fifo_num; i++) {
7834 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
7835
7836 tx_cfg->fifo_len = tx_fifo_len[i];
7837 tx_cfg->fifo_priority = i;
7838 }
7839
7840 /* mapping the QoS priority to the configured fifos */
7841 for (i = 0; i < MAX_TX_FIFOS; i++)
7842 config->fifo_mapping[i] = fifo_map[config->tx_fifo_num - 1][i];
7843
7844 /* map the hashing selector table to the configured fifos */
7845 for (i = 0; i < config->tx_fifo_num; i++)
7846 sp->fifo_selector[i] = fifo_selector[i];
7847
7848
7849 config->tx_intr_type = TXD_INT_TYPE_UTILZ;
7850 for (i = 0; i < config->tx_fifo_num; i++) {
7851 struct tx_fifo_config *tx_cfg = &config->tx_cfg[i];
7852
7853 tx_cfg->f_no_snoop = (NO_SNOOP_TXD | NO_SNOOP_TXD_BUFFER);
7854 if (tx_cfg->fifo_len < 65) {
7855 config->tx_intr_type = TXD_INT_TYPE_PER_LIST;
7856 break;
7857 }
7858 }
7859 /* + 2 because one Txd for skb->data and one Txd for UFO */
7860 config->max_txds = MAX_SKB_FRAGS + 2;
7861
7862 /* Rx side parameters. */
7863 config->rx_ring_num = rx_ring_num;
7864 for (i = 0; i < config->rx_ring_num; i++) {
7865 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
7866 struct ring_info *ring = &mac_control->rings[i];
7867
7868 rx_cfg->num_rxd = rx_ring_sz[i] * (rxd_count[sp->rxd_mode] + 1);
7869 rx_cfg->ring_priority = i;
7870 ring->rx_bufs_left = 0;
7871 ring->rxd_mode = sp->rxd_mode;
7872 ring->rxd_count = rxd_count[sp->rxd_mode];
7873 ring->pdev = sp->pdev;
7874 ring->dev = sp->dev;
7875 }
7876
7877 for (i = 0; i < rx_ring_num; i++) {
7878 struct rx_ring_config *rx_cfg = &config->rx_cfg[i];
7879
7880 rx_cfg->ring_org = RING_ORG_BUFF1;
7881 rx_cfg->f_no_snoop = (NO_SNOOP_RXD | NO_SNOOP_RXD_BUFFER);
7882 }
7883
7884 /* Setting Mac Control parameters */
7885 mac_control->rmac_pause_time = rmac_pause_time;
7886 mac_control->mc_pause_threshold_q0q3 = mc_pause_threshold_q0q3;
7887 mac_control->mc_pause_threshold_q4q7 = mc_pause_threshold_q4q7;
7888
7889
7890 /* initialize the shared memory used by the NIC and the host */
7891 if (init_shared_mem(sp)) {
7892 DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n", dev->name);
7893 ret = -ENOMEM;
7894 goto mem_alloc_failed;
7895 }
7896
7897 sp->bar0 = pci_ioremap_bar(pdev, 0);
7898 if (!sp->bar0) {
7899 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
7900 dev->name);
7901 ret = -ENOMEM;
7902 goto bar0_remap_failed;
7903 }
7904
7905 sp->bar1 = pci_ioremap_bar(pdev, 2);
7906 if (!sp->bar1) {
7907 DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
7908 dev->name);
7909 ret = -ENOMEM;
7910 goto bar1_remap_failed;
7911 }
7912
7913 dev->irq = pdev->irq;
7914 dev->base_addr = (unsigned long)sp->bar0;
7915
7916 /* Initializing the BAR1 address as the start of the FIFO pointer. */
7917 for (j = 0; j < MAX_TX_FIFOS; j++) {
7918 mac_control->tx_FIFO_start[j] = sp->bar1 + (j * 0x00020000);
7919 }
7920
7921 /* Driver entry points */
7922 dev->netdev_ops = &s2io_netdev_ops;
7923 SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
7924 dev->hw_features = NETIF_F_SG | NETIF_F_IP_CSUM |
7925 NETIF_F_TSO | NETIF_F_TSO6 |
7926 NETIF_F_RXCSUM | NETIF_F_LRO;
7927 dev->features |= dev->hw_features |
7928 NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
7929 if (sp->device_type & XFRAME_II_DEVICE) {
7930 dev->hw_features |= NETIF_F_UFO;
7931 if (ufo)
7932 dev->features |= NETIF_F_UFO;
7933 }
7934 if (sp->high_dma_flag == true)
7935 dev->features |= NETIF_F_HIGHDMA;
7936 dev->watchdog_timeo = WATCH_DOG_TIMEOUT;
7937 INIT_WORK(&sp->rst_timer_task, s2io_restart_nic);
7938 INIT_WORK(&sp->set_link_task, s2io_set_link);
7939
7940 pci_save_state(sp->pdev);
7941
7942 /* Setting swapper control on the NIC, for proper reset operation */
7943 if (s2io_set_swapper(sp)) {
7944 DBG_PRINT(ERR_DBG, "%s: swapper settings are wrong\n",
7945 dev->name);
7946 ret = -EAGAIN;
7947 goto set_swap_failed;
7948 }
7949
7950 /* Verify if the Herc works on the slot its placed into */
7951 if (sp->device_type & XFRAME_II_DEVICE) {
7952 mode = s2io_verify_pci_mode(sp);
7953 if (mode < 0) {
7954 DBG_PRINT(ERR_DBG, "%s: Unsupported PCI bus mode\n",
7955 __func__);
7956 ret = -EBADSLT;
7957 goto set_swap_failed;
7958 }
7959 }
7960
7961 if (sp->config.intr_type == MSI_X) {
7962 sp->num_entries = config->rx_ring_num + 1;
7963 ret = s2io_enable_msi_x(sp);
7964
7965 if (!ret) {
7966 ret = s2io_test_msi(sp);
7967 /* rollback MSI-X, will re-enable during add_isr() */
7968 remove_msix_isr(sp);
7969 }
7970 if (ret) {
7971
7972 DBG_PRINT(ERR_DBG,
7973 "MSI-X requested but failed to enable\n");
7974 sp->config.intr_type = INTA;
7975 }
7976 }
7977
7978 if (config->intr_type == MSI_X) {
7979 for (i = 0; i < config->rx_ring_num ; i++) {
7980 struct ring_info *ring = &mac_control->rings[i];
7981
7982 netif_napi_add(dev, &ring->napi, s2io_poll_msix, 64);
7983 }
7984 } else {
7985 netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64);
7986 }
7987
7988 /* Not needed for Herc */
7989 if (sp->device_type & XFRAME_I_DEVICE) {
7990 /*
7991 * Fix for all "FFs" MAC address problems observed on
7992 * Alpha platforms
7993 */
7994 fix_mac_address(sp);
7995 s2io_reset(sp);
7996 }
7997
7998 /*
7999 * MAC address initialization.
8000 * For now only one mac address will be read and used.
8001 */
8002 bar0 = sp->bar0;
8003 val64 = RMAC_ADDR_CMD_MEM_RD | RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
8004 RMAC_ADDR_CMD_MEM_OFFSET(0 + S2IO_MAC_ADDR_START_OFFSET);
8005 writeq(val64, &bar0->rmac_addr_cmd_mem);
8006 wait_for_cmd_complete(&bar0->rmac_addr_cmd_mem,
8007 RMAC_ADDR_CMD_MEM_STROBE_CMD_EXECUTING,
8008 S2IO_BIT_RESET);
8009 tmp64 = readq(&bar0->rmac_addr_data0_mem);
8010 mac_down = (u32)tmp64;
8011 mac_up = (u32) (tmp64 >> 32);
8012
8013 sp->def_mac_addr[0].mac_addr[3] = (u8) (mac_up);
8014 sp->def_mac_addr[0].mac_addr[2] = (u8) (mac_up >> 8);
8015 sp->def_mac_addr[0].mac_addr[1] = (u8) (mac_up >> 16);
8016 sp->def_mac_addr[0].mac_addr[0] = (u8) (mac_up >> 24);
8017 sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
8018 sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
8019
8020 /* Set the factory defined MAC address initially */
8021 dev->addr_len = ETH_ALEN;
8022 memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
8023 memcpy(dev->perm_addr, dev->dev_addr, ETH_ALEN);
8024
8025 /* initialize number of multicast & unicast MAC entries variables */
8026 if (sp->device_type == XFRAME_I_DEVICE) {
8027 config->max_mc_addr = S2IO_XENA_MAX_MC_ADDRESSES;
8028 config->max_mac_addr = S2IO_XENA_MAX_MAC_ADDRESSES;
8029 config->mc_start_offset = S2IO_XENA_MC_ADDR_START_OFFSET;
8030 } else if (sp->device_type == XFRAME_II_DEVICE) {
8031 config->max_mc_addr = S2IO_HERC_MAX_MC_ADDRESSES;
8032 config->max_mac_addr = S2IO_HERC_MAX_MAC_ADDRESSES;
8033 config->mc_start_offset = S2IO_HERC_MC_ADDR_START_OFFSET;
8034 }
8035
8036 /* store mac addresses from CAM to s2io_nic structure */
8037 do_s2io_store_unicast_mc(sp);
8038
8039 /* Configure MSIX vector for number of rings configured plus one */
8040 if ((sp->device_type == XFRAME_II_DEVICE) &&
8041 (config->intr_type == MSI_X))
8042 sp->num_entries = config->rx_ring_num + 1;
8043
8044 /* Store the values of the MSIX table in the s2io_nic structure */
8045 store_xmsi_data(sp);
8046 /* reset Nic and bring it to known state */
8047 s2io_reset(sp);
8048
8049 /*
8050 * Initialize link state flags
8051 * and the card state parameter
8052 */
8053 sp->state = 0;
8054
8055 /* Initialize spinlocks */
8056 for (i = 0; i < sp->config.tx_fifo_num; i++) {
8057 struct fifo_info *fifo = &mac_control->fifos[i];
8058
8059 spin_lock_init(&fifo->tx_lock);
8060 }
8061
8062 /*
8063 * SXE-002: Configure link and activity LED to init state
8064 * on driver load.
8065 */
8066 subid = sp->pdev->subsystem_device;
8067 if ((subid & 0xFF) >= 0x07) {
8068 val64 = readq(&bar0->gpio_control);
8069 val64 |= 0x0000800000000000ULL;
8070 writeq(val64, &bar0->gpio_control);
8071 val64 = 0x0411040400000000ULL;
8072 writeq(val64, (void __iomem *)bar0 + 0x2700);
8073 val64 = readq(&bar0->gpio_control);
8074 }
8075
8076 sp->rx_csum = 1; /* Rx chksum verify enabled by default */
8077
8078 if (register_netdev(dev)) {
8079 DBG_PRINT(ERR_DBG, "Device registration failed\n");
8080 ret = -ENODEV;
8081 goto register_failed;
8082 }
8083 s2io_vpd_read(sp);
8084 DBG_PRINT(ERR_DBG, "Copyright(c) 2002-2010 Exar Corp.\n");
8085 DBG_PRINT(ERR_DBG, "%s: Neterion %s (rev %d)\n", dev->name,
8086 sp->product_name, pdev->revision);
8087 DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
8088 s2io_driver_version);
8089 DBG_PRINT(ERR_DBG, "%s: MAC Address: %pM\n", dev->name, dev->dev_addr);
8090 DBG_PRINT(ERR_DBG, "Serial number: %s\n", sp->serial_num);
8091 if (sp->device_type & XFRAME_II_DEVICE) {
8092 mode = s2io_print_pci_mode(sp);
8093 if (mode < 0) {
8094 ret = -EBADSLT;
8095 unregister_netdev(dev);
8096 goto set_swap_failed;
8097 }
8098 }
8099 switch (sp->rxd_mode) {
8100 case RXD_MODE_1:
8101 DBG_PRINT(ERR_DBG, "%s: 1-Buffer receive mode enabled\n",
8102 dev->name);
8103 break;
8104 case RXD_MODE_3B:
8105 DBG_PRINT(ERR_DBG, "%s: 2-Buffer receive mode enabled\n",
8106 dev->name);
8107 break;
8108 }
8109
8110 switch (sp->config.napi) {
8111 case 0:
8112 DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name);
8113 break;
8114 case 1:
8115 DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
8116 break;
8117 }
8118
8119 DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name,
8120 sp->config.tx_fifo_num);
8121
8122 DBG_PRINT(ERR_DBG, "%s: Using %d Rx ring(s)\n", dev->name,
8123 sp->config.rx_ring_num);
8124
8125 switch (sp->config.intr_type) {
8126 case INTA:
8127 DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
8128 break;
8129 case MSI_X:
8130 DBG_PRINT(ERR_DBG, "%s: Interrupt type MSI-X\n", dev->name);
8131 break;
8132 }
8133 if (sp->config.multiq) {
8134 for (i = 0; i < sp->config.tx_fifo_num; i++) {
8135 struct fifo_info *fifo = &mac_control->fifos[i];
8136
8137 fifo->multiq = config->multiq;
8138 }
8139 DBG_PRINT(ERR_DBG, "%s: Multiqueue support enabled\n",
8140 dev->name);
8141 } else
8142 DBG_PRINT(ERR_DBG, "%s: Multiqueue support disabled\n",
8143 dev->name);
8144
8145 switch (sp->config.tx_steering_type) {
8146 case NO_STEERING:
8147 DBG_PRINT(ERR_DBG, "%s: No steering enabled for transmit\n",
8148 dev->name);
8149 break;
8150 case TX_PRIORITY_STEERING:
8151 DBG_PRINT(ERR_DBG,
8152 "%s: Priority steering enabled for transmit\n",
8153 dev->name);
8154 break;
8155 case TX_DEFAULT_STEERING:
8156 DBG_PRINT(ERR_DBG,
8157 "%s: Default steering enabled for transmit\n",
8158 dev->name);
8159 }
8160
8161 DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
8162 dev->name);
8163 if (ufo)
8164 DBG_PRINT(ERR_DBG,
8165 "%s: UDP Fragmentation Offload(UFO) enabled\n",
8166 dev->name);
8167 /* Initialize device name */
8168 sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
8169
8170 if (vlan_tag_strip)
8171 sp->vlan_strip_flag = 1;
8172 else
8173 sp->vlan_strip_flag = 0;
8174
8175 /*
8176 * Make Link state as off at this point, when the Link change
8177 * interrupt comes the state will be automatically changed to
8178 * the right state.
8179 */
8180 netif_carrier_off(dev);
8181
8182 return 0;
8183
8184 register_failed:
8185 set_swap_failed:
8186 iounmap(sp->bar1);
8187 bar1_remap_failed:
8188 iounmap(sp->bar0);
8189 bar0_remap_failed:
8190 mem_alloc_failed:
8191 free_shared_mem(sp);
8192 pci_disable_device(pdev);
8193 pci_release_regions(pdev);
8194 pci_set_drvdata(pdev, NULL);
8195 free_netdev(dev);
8196
8197 return ret;
8198 }
8199
8200 /**
8201 * s2io_rem_nic - Free the PCI device
8202 * @pdev: structure containing the PCI related information of the device.
8203 * Description: This function is called by the Pci subsystem to release a
8204 * PCI device and free up all resource held up by the device. This could
8205 * be in response to a Hot plug event or when the driver is to be removed
8206 * from memory.
8207 */
8208
8209 static void __devexit s2io_rem_nic(struct pci_dev *pdev)
8210 {
8211 struct net_device *dev = pci_get_drvdata(pdev);
8212 struct s2io_nic *sp;
8213
8214 if (dev == NULL) {
8215 DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
8216 return;
8217 }
8218
8219 sp = netdev_priv(dev);
8220
8221 cancel_work_sync(&sp->rst_timer_task);
8222 cancel_work_sync(&sp->set_link_task);
8223
8224 unregister_netdev(dev);
8225
8226 free_shared_mem(sp);
8227 iounmap(sp->bar0);
8228 iounmap(sp->bar1);
8229 pci_release_regions(pdev);
8230 pci_set_drvdata(pdev, NULL);
8231 free_netdev(dev);
8232 pci_disable_device(pdev);
8233 }
8234
8235 /**
8236 * s2io_starter - Entry point for the driver
8237 * Description: This function is the entry point for the driver. It verifies
8238 * the module loadable parameters and initializes PCI configuration space.
8239 */
8240
8241 static int __init s2io_starter(void)
8242 {
8243 return pci_register_driver(&s2io_driver);
8244 }
8245
8246 /**
8247 * s2io_closer - Cleanup routine for the driver
8248 * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
8249 */
8250
8251 static __exit void s2io_closer(void)
8252 {
8253 pci_unregister_driver(&s2io_driver);
8254 DBG_PRINT(INIT_DBG, "cleanup done\n");
8255 }
8256
8257 module_init(s2io_starter);
8258 module_exit(s2io_closer);
8259
8260 static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
8261 struct tcphdr **tcp, struct RxD_t *rxdp,
8262 struct s2io_nic *sp)
8263 {
8264 int ip_off;
8265 u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
8266
8267 if (!(rxdp->Control_1 & RXD_FRAME_PROTO_TCP)) {
8268 DBG_PRINT(INIT_DBG,
8269 "%s: Non-TCP frames not supported for LRO\n",
8270 __func__);
8271 return -1;
8272 }
8273
8274 /* Checking for DIX type or DIX type with VLAN */
8275 if ((l2_type == 0) || (l2_type == 4)) {
8276 ip_off = HEADER_ETHERNET_II_802_3_SIZE;
8277 /*
8278 * If vlan stripping is disabled and the frame is VLAN tagged,
8279 * shift the offset by the VLAN header size bytes.
8280 */
8281 if ((!sp->vlan_strip_flag) &&
8282 (rxdp->Control_1 & RXD_FRAME_VLAN_TAG))
8283 ip_off += HEADER_VLAN_SIZE;
8284 } else {
8285 /* LLC, SNAP etc are considered non-mergeable */
8286 return -1;
8287 }
8288
8289 *ip = (struct iphdr *)((u8 *)buffer + ip_off);
8290 ip_len = (u8)((*ip)->ihl);
8291 ip_len <<= 2;
8292 *tcp = (struct tcphdr *)((unsigned long)*ip + ip_len);
8293
8294 return 0;
8295 }
8296
8297 static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
8298 struct tcphdr *tcp)
8299 {
8300 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8301 if ((lro->iph->saddr != ip->saddr) ||
8302 (lro->iph->daddr != ip->daddr) ||
8303 (lro->tcph->source != tcp->source) ||
8304 (lro->tcph->dest != tcp->dest))
8305 return -1;
8306 return 0;
8307 }
8308
8309 static inline int get_l4_pyld_length(struct iphdr *ip, struct tcphdr *tcp)
8310 {
8311 return ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2);
8312 }
8313
8314 static void initiate_new_session(struct lro *lro, u8 *l2h,
8315 struct iphdr *ip, struct tcphdr *tcp,
8316 u32 tcp_pyld_len, u16 vlan_tag)
8317 {
8318 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8319 lro->l2h = l2h;
8320 lro->iph = ip;
8321 lro->tcph = tcp;
8322 lro->tcp_next_seq = tcp_pyld_len + ntohl(tcp->seq);
8323 lro->tcp_ack = tcp->ack_seq;
8324 lro->sg_num = 1;
8325 lro->total_len = ntohs(ip->tot_len);
8326 lro->frags_len = 0;
8327 lro->vlan_tag = vlan_tag;
8328 /*
8329 * Check if we saw TCP timestamp.
8330 * Other consistency checks have already been done.
8331 */
8332 if (tcp->doff == 8) {
8333 __be32 *ptr;
8334 ptr = (__be32 *)(tcp+1);
8335 lro->saw_ts = 1;
8336 lro->cur_tsval = ntohl(*(ptr+1));
8337 lro->cur_tsecr = *(ptr+2);
8338 }
8339 lro->in_use = 1;
8340 }
8341
8342 static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
8343 {
8344 struct iphdr *ip = lro->iph;
8345 struct tcphdr *tcp = lro->tcph;
8346 __sum16 nchk;
8347 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
8348
8349 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8350
8351 /* Update L3 header */
8352 ip->tot_len = htons(lro->total_len);
8353 ip->check = 0;
8354 nchk = ip_fast_csum((u8 *)lro->iph, ip->ihl);
8355 ip->check = nchk;
8356
8357 /* Update L4 header */
8358 tcp->ack_seq = lro->tcp_ack;
8359 tcp->window = lro->window;
8360
8361 /* Update tsecr field if this session has timestamps enabled */
8362 if (lro->saw_ts) {
8363 __be32 *ptr = (__be32 *)(tcp + 1);
8364 *(ptr+2) = lro->cur_tsecr;
8365 }
8366
8367 /* Update counters required for calculation of
8368 * average no. of packets aggregated.
8369 */
8370 swstats->sum_avg_pkts_aggregated += lro->sg_num;
8371 swstats->num_aggregations++;
8372 }
8373
8374 static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
8375 struct tcphdr *tcp, u32 l4_pyld)
8376 {
8377 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8378 lro->total_len += l4_pyld;
8379 lro->frags_len += l4_pyld;
8380 lro->tcp_next_seq += l4_pyld;
8381 lro->sg_num++;
8382
8383 /* Update ack seq no. and window ad(from this pkt) in LRO object */
8384 lro->tcp_ack = tcp->ack_seq;
8385 lro->window = tcp->window;
8386
8387 if (lro->saw_ts) {
8388 __be32 *ptr;
8389 /* Update tsecr and tsval from this packet */
8390 ptr = (__be32 *)(tcp+1);
8391 lro->cur_tsval = ntohl(*(ptr+1));
8392 lro->cur_tsecr = *(ptr + 2);
8393 }
8394 }
8395
8396 static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
8397 struct tcphdr *tcp, u32 tcp_pyld_len)
8398 {
8399 u8 *ptr;
8400
8401 DBG_PRINT(INFO_DBG, "%s: Been here...\n", __func__);
8402
8403 if (!tcp_pyld_len) {
8404 /* Runt frame or a pure ack */
8405 return -1;
8406 }
8407
8408 if (ip->ihl != 5) /* IP has options */
8409 return -1;
8410
8411 /* If we see CE codepoint in IP header, packet is not mergeable */
8412 if (INET_ECN_is_ce(ipv4_get_dsfield(ip)))
8413 return -1;
8414
8415 /* If we see ECE or CWR flags in TCP header, packet is not mergeable */
8416 if (tcp->urg || tcp->psh || tcp->rst ||
8417 tcp->syn || tcp->fin ||
8418 tcp->ece || tcp->cwr || !tcp->ack) {
8419 /*
8420 * Currently recognize only the ack control word and
8421 * any other control field being set would result in
8422 * flushing the LRO session
8423 */
8424 return -1;
8425 }
8426
8427 /*
8428 * Allow only one TCP timestamp option. Don't aggregate if
8429 * any other options are detected.
8430 */
8431 if (tcp->doff != 5 && tcp->doff != 8)
8432 return -1;
8433
8434 if (tcp->doff == 8) {
8435 ptr = (u8 *)(tcp + 1);
8436 while (*ptr == TCPOPT_NOP)
8437 ptr++;
8438 if (*ptr != TCPOPT_TIMESTAMP || *(ptr+1) != TCPOLEN_TIMESTAMP)
8439 return -1;
8440
8441 /* Ensure timestamp value increases monotonically */
8442 if (l_lro)
8443 if (l_lro->cur_tsval > ntohl(*((__be32 *)(ptr+2))))
8444 return -1;
8445
8446 /* timestamp echo reply should be non-zero */
8447 if (*((__be32 *)(ptr+6)) == 0)
8448 return -1;
8449 }
8450
8451 return 0;
8452 }
8453
8454 static int s2io_club_tcp_session(struct ring_info *ring_data, u8 *buffer,
8455 u8 **tcp, u32 *tcp_len, struct lro **lro,
8456 struct RxD_t *rxdp, struct s2io_nic *sp)
8457 {
8458 struct iphdr *ip;
8459 struct tcphdr *tcph;
8460 int ret = 0, i;
8461 u16 vlan_tag = 0;
8462 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
8463
8464 ret = check_L2_lro_capable(buffer, &ip, (struct tcphdr **)tcp,
8465 rxdp, sp);
8466 if (ret)
8467 return ret;
8468
8469 DBG_PRINT(INFO_DBG, "IP Saddr: %x Daddr: %x\n", ip->saddr, ip->daddr);
8470
8471 vlan_tag = RXD_GET_VLAN_TAG(rxdp->Control_2);
8472 tcph = (struct tcphdr *)*tcp;
8473 *tcp_len = get_l4_pyld_length(ip, tcph);
8474 for (i = 0; i < MAX_LRO_SESSIONS; i++) {
8475 struct lro *l_lro = &ring_data->lro0_n[i];
8476 if (l_lro->in_use) {
8477 if (check_for_socket_match(l_lro, ip, tcph))
8478 continue;
8479 /* Sock pair matched */
8480 *lro = l_lro;
8481
8482 if ((*lro)->tcp_next_seq != ntohl(tcph->seq)) {
8483 DBG_PRINT(INFO_DBG, "%s: Out of sequence. "
8484 "expected 0x%x, actual 0x%x\n",
8485 __func__,
8486 (*lro)->tcp_next_seq,
8487 ntohl(tcph->seq));
8488
8489 swstats->outof_sequence_pkts++;
8490 ret = 2;
8491 break;
8492 }
8493
8494 if (!verify_l3_l4_lro_capable(l_lro, ip, tcph,
8495 *tcp_len))
8496 ret = 1; /* Aggregate */
8497 else
8498 ret = 2; /* Flush both */
8499 break;
8500 }
8501 }
8502
8503 if (ret == 0) {
8504 /* Before searching for available LRO objects,
8505 * check if the pkt is L3/L4 aggregatable. If not
8506 * don't create new LRO session. Just send this
8507 * packet up.
8508 */
8509 if (verify_l3_l4_lro_capable(NULL, ip, tcph, *tcp_len))
8510 return 5;
8511
8512 for (i = 0; i < MAX_LRO_SESSIONS; i++) {
8513 struct lro *l_lro = &ring_data->lro0_n[i];
8514 if (!(l_lro->in_use)) {
8515 *lro = l_lro;
8516 ret = 3; /* Begin anew */
8517 break;
8518 }
8519 }
8520 }
8521
8522 if (ret == 0) { /* sessions exceeded */
8523 DBG_PRINT(INFO_DBG, "%s: All LRO sessions already in use\n",
8524 __func__);
8525 *lro = NULL;
8526 return ret;
8527 }
8528
8529 switch (ret) {
8530 case 3:
8531 initiate_new_session(*lro, buffer, ip, tcph, *tcp_len,
8532 vlan_tag);
8533 break;
8534 case 2:
8535 update_L3L4_header(sp, *lro);
8536 break;
8537 case 1:
8538 aggregate_new_rx(*lro, ip, tcph, *tcp_len);
8539 if ((*lro)->sg_num == sp->lro_max_aggr_per_sess) {
8540 update_L3L4_header(sp, *lro);
8541 ret = 4; /* Flush the LRO */
8542 }
8543 break;
8544 default:
8545 DBG_PRINT(ERR_DBG, "%s: Don't know, can't say!!\n", __func__);
8546 break;
8547 }
8548
8549 return ret;
8550 }
8551
8552 static void clear_lro_session(struct lro *lro)
8553 {
8554 static u16 lro_struct_size = sizeof(struct lro);
8555
8556 memset(lro, 0, lro_struct_size);
8557 }
8558
8559 static void queue_rx_frame(struct sk_buff *skb, u16 vlan_tag)
8560 {
8561 struct net_device *dev = skb->dev;
8562 struct s2io_nic *sp = netdev_priv(dev);
8563
8564 skb->protocol = eth_type_trans(skb, dev);
8565 if (vlan_tag && sp->vlan_strip_flag)
8566 __vlan_hwaccel_put_tag(skb, vlan_tag);
8567 if (sp->config.napi)
8568 netif_receive_skb(skb);
8569 else
8570 netif_rx(skb);
8571 }
8572
8573 static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
8574 struct sk_buff *skb, u32 tcp_len)
8575 {
8576 struct sk_buff *first = lro->parent;
8577 struct swStat *swstats = &sp->mac_control.stats_info->sw_stat;
8578
8579 first->len += tcp_len;
8580 first->data_len = lro->frags_len;
8581 skb_pull(skb, (skb->len - tcp_len));
8582 if (skb_shinfo(first)->frag_list)
8583 lro->last_frag->next = skb;
8584 else
8585 skb_shinfo(first)->frag_list = skb;
8586 first->truesize += skb->truesize;
8587 lro->last_frag = skb;
8588 swstats->clubbed_frms_cnt++;
8589 }
8590
8591 /**
8592 * s2io_io_error_detected - called when PCI error is detected
8593 * @pdev: Pointer to PCI device
8594 * @state: The current pci connection state
8595 *
8596 * This function is called after a PCI bus error affecting
8597 * this device has been detected.
8598 */
8599 static pci_ers_result_t s2io_io_error_detected(struct pci_dev *pdev,
8600 pci_channel_state_t state)
8601 {
8602 struct net_device *netdev = pci_get_drvdata(pdev);
8603 struct s2io_nic *sp = netdev_priv(netdev);
8604
8605 netif_device_detach(netdev);
8606
8607 if (state == pci_channel_io_perm_failure)
8608 return PCI_ERS_RESULT_DISCONNECT;
8609
8610 if (netif_running(netdev)) {
8611 /* Bring down the card, while avoiding PCI I/O */
8612 do_s2io_card_down(sp, 0);
8613 }
8614 pci_disable_device(pdev);
8615
8616 return PCI_ERS_RESULT_NEED_RESET;
8617 }
8618
8619 /**
8620 * s2io_io_slot_reset - called after the pci bus has been reset.
8621 * @pdev: Pointer to PCI device
8622 *
8623 * Restart the card from scratch, as if from a cold-boot.
8624 * At this point, the card has exprienced a hard reset,
8625 * followed by fixups by BIOS, and has its config space
8626 * set up identically to what it was at cold boot.
8627 */
8628 static pci_ers_result_t s2io_io_slot_reset(struct pci_dev *pdev)
8629 {
8630 struct net_device *netdev = pci_get_drvdata(pdev);
8631 struct s2io_nic *sp = netdev_priv(netdev);
8632
8633 if (pci_enable_device(pdev)) {
8634 pr_err("Cannot re-enable PCI device after reset.\n");
8635 return PCI_ERS_RESULT_DISCONNECT;
8636 }
8637
8638 pci_set_master(pdev);
8639 s2io_reset(sp);
8640
8641 return PCI_ERS_RESULT_RECOVERED;
8642 }
8643
8644 /**
8645 * s2io_io_resume - called when traffic can start flowing again.
8646 * @pdev: Pointer to PCI device
8647 *
8648 * This callback is called when the error recovery driver tells
8649 * us that its OK to resume normal operation.
8650 */
8651 static void s2io_io_resume(struct pci_dev *pdev)
8652 {
8653 struct net_device *netdev = pci_get_drvdata(pdev);
8654 struct s2io_nic *sp = netdev_priv(netdev);
8655
8656 if (netif_running(netdev)) {
8657 if (s2io_card_up(sp)) {
8658 pr_err("Can't bring device back up after reset.\n");
8659 return;
8660 }
8661
8662 if (s2io_set_mac_addr(netdev, netdev->dev_addr) == FAILURE) {
8663 s2io_card_down(sp);
8664 pr_err("Can't restore mac addr after reset.\n");
8665 return;
8666 }
8667 }
8668
8669 netif_device_attach(netdev);
8670 netif_tx_wake_all_queues(netdev);
8671 }