drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c

   1 /*
   2  * Copyright (C) 1999 - 2010 Intel Corporation.
   3  * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
   4  *
   5  * This code was derived from the Intel e1000e Linux driver.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; version 2 of the License.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
  19  */
  20
  21 #include "pch_gbe.h"
  22 #include "pch_gbe_phy.h"
  23
  24 #define PHY_MAX_REG_ADDRESS   0x1F      /* 5 bit address bus (0-0x1F) */
  25
  26 /* PHY 1000 MII Register/Bit Definitions */
  27 /* PHY Registers defined by IEEE */
  28 #define PHY_CONTROL           0x00  /* Control Register */
  29 #define PHY_STATUS            0x01  /* Status Regiser */
  30 #define PHY_ID1               0x02  /* Phy Id Register (word 1) */
  31 #define PHY_ID2               0x03  /* Phy Id Register (word 2) */
  32 #define PHY_AUTONEG_ADV       0x04  /* Autoneg Advertisement */
  33 #define PHY_LP_ABILITY        0x05  /* Link Partner Ability (Base Page) */
  34 #define PHY_AUTONEG_EXP       0x06  /* Autoneg Expansion Register */
  35 #define PHY_NEXT_PAGE_TX      0x07  /* Next Page TX */
  36 #define PHY_LP_NEXT_PAGE      0x08  /* Link Partner Next Page */
  37 #define PHY_1000T_CTRL        0x09  /* 1000Base-T Control Register */
  38 #define PHY_1000T_STATUS      0x0A  /* 1000Base-T Status Register */
  39 #define PHY_EXT_STATUS        0x0F  /* Extended Status Register */
  40 #define PHY_PHYSP_CONTROL     0x10  /* PHY Specific Control Register */
  41 #define PHY_EXT_PHYSP_CONTROL 0x14  /* Extended PHY Specific Control Register */
  42 #define PHY_LED_CONTROL       0x18  /* LED Control Register */
  43 #define PHY_EXT_PHYSP_STATUS  0x1B  /* Extended PHY Specific Status Register */
  44
  45 /* PHY Control Register */
  46 #define MII_CR_SPEED_SELECT_MSB 0x0040  /* bits 6,13: 10=1000, 01=100, 00=10 */
  47 #define MII_CR_COLL_TEST_ENABLE 0x0080  /* Collision test enable */
  48 #define MII_CR_FULL_DUPLEX      0x0100  /* FDX =1, half duplex =0 */
  49 #define MII_CR_RESTART_AUTO_NEG 0x0200  /* Restart auto negotiation */
  50 #define MII_CR_ISOLATE          0x0400  /* Isolate PHY from MII */
  51 #define MII_CR_POWER_DOWN       0x0800  /* Power down */
  52 #define MII_CR_AUTO_NEG_EN      0x1000  /* Auto Neg Enable */
  53 #define MII_CR_SPEED_SELECT_LSB 0x2000  /* bits 6,13: 10=1000, 01=100, 00=10 */
  54 #define MII_CR_LOOPBACK         0x4000  /* 0 = normal, 1 = loopback */
  55 #define MII_CR_RESET            0x8000  /* 0 = normal, 1 = PHY reset */
  56 #define MII_CR_SPEED_1000       0x0040
  57 #define MII_CR_SPEED_100        0x2000
  58 #define MII_CR_SPEED_10         0x0000
  59
  60 /* PHY Status Register */
  61 #define MII_SR_EXTENDED_CAPS     0x0001 /* Extended register capabilities */
  62 #define MII_SR_JABBER_DETECT     0x0002 /* Jabber Detected */
  63 #define MII_SR_LINK_STATUS       0x0004 /* Link Status 1 = link */
  64 #define MII_SR_AUTONEG_CAPS      0x0008 /* Auto Neg Capable */
  65 #define MII_SR_REMOTE_FAULT      0x0010 /* Remote Fault Detect */
  66 #define MII_SR_AUTONEG_COMPLETE  0x0020 /* Auto Neg Complete */
  67 #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */
  68 #define MII_SR_EXTENDED_STATUS   0x0100 /* Ext. status info in Reg 0x0F */
  69 #define MII_SR_100T2_HD_CAPS     0x0200 /* 100T2 Half Duplex Capable */
  70 #define MII_SR_100T2_FD_CAPS     0x0400 /* 100T2 Full Duplex Capable */
  71 #define MII_SR_10T_HD_CAPS       0x0800 /* 10T   Half Duplex Capable */
  72 #define MII_SR_10T_FD_CAPS       0x1000 /* 10T   Full Duplex Capable */
  73 #define MII_SR_100X_HD_CAPS      0x2000 /* 100X  Half Duplex Capable */
  74 #define MII_SR_100X_FD_CAPS      0x4000 /* 100X  Full Duplex Capable */
  75 #define MII_SR_100T4_CAPS        0x8000 /* 100T4 Capable */
  76
  77 /* Phy Id Register (word 2) */
  78 #define PHY_REVISION_MASK        0x000F
  79
  80 /* PHY Specific Control Register */
  81 #define PHYSP_CTRL_ASSERT_CRS_TX  0x0800
  82
  83
  84 /* Default value of PHY register */
  85 #define PHY_CONTROL_DEFAULT         0x1140 /* Control Register */
  86 #define PHY_AUTONEG_ADV_DEFAULT     0x01e0 /* Autoneg Advertisement */
  87 #define PHY_NEXT_PAGE_TX_DEFAULT    0x2001 /* Next Page TX */
  88 #define PHY_1000T_CTRL_DEFAULT      0x0300 /* 1000Base-T Control Register */
  89 #define PHY_PHYSP_CONTROL_DEFAULT   0x01EE /* PHY Specific Control Register */
  90
  91 /**
  92  * pch_gbe_phy_get_id - Retrieve the PHY ID and revision
  93  * @hw:        Pointer to the HW structure
  94  * Returns
  95  *      0:                      Successful.
  96  *      Negative value:         Failed.
  97  */
  98 s32 pch_gbe_phy_get_id(struct pch_gbe_hw *hw)
  99 {
 100         struct pch_gbe_phy_info *phy = &hw->phy;
 101         s32 ret;
 102         u16 phy_id1;
 103         u16 phy_id2;
 104
 105         ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID1, &phy_id1);
 106         if (ret)
 107                 return ret;
 108         ret = pch_gbe_phy_read_reg_miic(hw, PHY_ID2, &phy_id2);
 109         if (ret)
 110                 return ret;
 111         /*
 112          * PHY_ID1: [bit15-0:ID(21-6)]
 113          * PHY_ID2: [bit15-10:ID(5-0)][bit9-4:Model][bit3-0:revision]
 114          */
 115         phy->id = (u32)phy_id1;
 116         phy->id = ((phy->id << 6) | ((phy_id2 & 0xFC00) >> 10));
 117         phy->revision = (u32) (phy_id2 & 0x000F);
 118         pr_debug("phy->id : 0x%08x  phy->revision : 0x%08x\n",
 119                  phy->id, phy->revision);
 120         return 0;
 121 }
 122
 123 /**
 124  * pch_gbe_phy_read_reg_miic - Read MII control register
 125  * @hw:      Pointer to the HW structure
 126  * @offset:  Register offset to be read
 127  * @data:    Pointer to the read data
 128  * Returns
 129  *      0:              Successful.
 130  *      -EINVAL:        Invalid argument.
 131  */
 132 s32 pch_gbe_phy_read_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 *data)
 133 {
 134         struct pch_gbe_phy_info *phy = &hw->phy;
 135
 136         if (offset > PHY_MAX_REG_ADDRESS) {
 137                 pr_err("PHY Address %d is out of range\n", offset);
 138                 return -EINVAL;
 139         }
 140         *data = pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_READ,
 141                                       offset, (u16)0);
 142         return 0;
 143 }
 144
 145 /**
 146  * pch_gbe_phy_write_reg_miic - Write MII control register
 147  * @hw:      Pointer to the HW structure
 148  * @offset:  Register offset to be read
 149  * @data:    data to write to register at offset
 150  * Returns
 151  *      0:              Successful.
 152  *      -EINVAL:        Invalid argument.
 153  */
 154 s32 pch_gbe_phy_write_reg_miic(struct pch_gbe_hw *hw, u32 offset, u16 data)
 155 {
 156         struct pch_gbe_phy_info *phy = &hw->phy;
 157
 158         if (offset > PHY_MAX_REG_ADDRESS) {
 159                 pr_err("PHY Address %d is out of range\n", offset);
 160                 return -EINVAL;
 161         }
 162         pch_gbe_mac_ctrl_miim(hw, phy->addr, PCH_GBE_HAL_MIIM_WRITE,
 163                                  offset, data);
 164         return 0;
 165 }
 166
 167 /**
 168  * pch_gbe_phy_sw_reset - PHY software reset
 169  * @hw:             Pointer to the HW structure
 170  */
 171 void pch_gbe_phy_sw_reset(struct pch_gbe_hw *hw)
 172 {
 173         u16 phy_ctrl;
 174
 175         pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &phy_ctrl);
 176         phy_ctrl |= MII_CR_RESET;
 177         pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, phy_ctrl);
 178         udelay(1);
 179 }
 180
 181 /**
 182  * pch_gbe_phy_hw_reset - PHY hardware reset
 183  * @hw:    Pointer to the HW structure
 184  */
 185 void pch_gbe_phy_hw_reset(struct pch_gbe_hw *hw)
 186 {
 187         pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, PHY_CONTROL_DEFAULT);
 188         pch_gbe_phy_write_reg_miic(hw, PHY_AUTONEG_ADV,
 189                                         PHY_AUTONEG_ADV_DEFAULT);
 190         pch_gbe_phy_write_reg_miic(hw, PHY_NEXT_PAGE_TX,
 191                                         PHY_NEXT_PAGE_TX_DEFAULT);
 192         pch_gbe_phy_write_reg_miic(hw, PHY_1000T_CTRL, PHY_1000T_CTRL_DEFAULT);
 193         pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL,
 194                                         PHY_PHYSP_CONTROL_DEFAULT);
 195 }
 196
 197 /**
 198  * pch_gbe_phy_power_up - restore link in case the phy was powered down
 199  * @hw:    Pointer to the HW structure
 200  */
 201 void pch_gbe_phy_power_up(struct pch_gbe_hw *hw)
 202 {
 203         u16 mii_reg;
 204
 205         mii_reg = 0;
 206         /* Just clear the power down bit to wake the phy back up */
 207         /* according to the manual, the phy will retain its
 208          * settings across a power-down/up cycle */
 209         pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
 210         mii_reg &= ~MII_CR_POWER_DOWN;
 211         pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
 212 }
 213
 214 /**
 215  * pch_gbe_phy_power_down - Power down PHY
 216  * @hw:    Pointer to the HW structure
 217  */
 218 void pch_gbe_phy_power_down(struct pch_gbe_hw *hw)
 219 {
 220         u16 mii_reg;
 221
 222         mii_reg = 0;
 223         /* Power down the PHY so no link is implied when interface is down *
 224          * The PHY cannot be powered down if any of the following is TRUE *
 225          * (a) WoL is enabled
 226          * (b) AMT is active
 227          */
 228         pch_gbe_phy_read_reg_miic(hw, PHY_CONTROL, &mii_reg);
 229         mii_reg |= MII_CR_POWER_DOWN;
 230         pch_gbe_phy_write_reg_miic(hw, PHY_CONTROL, mii_reg);
 231         mdelay(1);
 232 }
 233
 234 /**
 235  * pch_gbe_phy_set_rgmii - RGMII interface setting
 236  * @hw:             Pointer to the HW structure
 237  */
 238 inline void pch_gbe_phy_set_rgmii(struct pch_gbe_hw *hw)
 239 {
 240         pch_gbe_phy_sw_reset(hw);
 241 }
 242
 243 /**
 244  * pch_gbe_phy_init_setting - PHY initial setting
 245  * @hw:             Pointer to the HW structure
 246  */
 247 void pch_gbe_phy_init_setting(struct pch_gbe_hw *hw)
 248 {
 249         struct pch_gbe_adapter *adapter;
 250         struct ethtool_cmd     cmd = { .cmd = ETHTOOL_GSET };
 251         int ret;
 252         u16 mii_reg;
 253
 254         adapter = container_of(hw, struct pch_gbe_adapter, hw);
 255         ret = mii_ethtool_gset(&adapter->mii, &cmd);
 256         if (ret)
 257                 pr_err("Error: mii_ethtool_gset\n");
 258
 259         ethtool_cmd_speed_set(&cmd, hw->mac.link_speed);
 260         cmd.duplex = hw->mac.link_duplex;
 261         cmd.advertising = hw->phy.autoneg_advertised;
 262         cmd.autoneg = hw->mac.autoneg;
 263         pch_gbe_phy_write_reg_miic(hw, MII_BMCR, BMCR_RESET);
 264         ret = mii_ethtool_sset(&adapter->mii, &cmd);
 265         if (ret)
 266                 pr_err("Error: mii_ethtool_sset\n");
 267
 268         pch_gbe_phy_sw_reset(hw);
 269
 270         pch_gbe_phy_read_reg_miic(hw, PHY_PHYSP_CONTROL, &mii_reg);
 271         mii_reg |= PHYSP_CTRL_ASSERT_CRS_TX;
 272         pch_gbe_phy_write_reg_miic(hw, PHY_PHYSP_CONTROL, mii_reg);
 273
 274 }