drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c

   1 /*
   2  * Generic library functions for the MSF (Media and Switch Fabric) unit
   3  * found on the Intel IXP2400 network processor.
   4  *
   5  * Copyright (C) 2004, 2005 Lennert Buytenhek <buytenh@wantstofly.org>
   6  * Dedicated to Marija Kulikova.
   7  *
   8  * This program is free software; you can redistribute it and/or modify
   9  * it under the terms of the GNU Lesser General Public License as
  10  * published by the Free Software Foundation; either version 2.1 of the
  11  * License, or (at your option) any later version.
  12  */
  13
  14 #include <linux/kernel.h>
  15 #include <linux/init.h>
  16 #include <mach/hardware.h>
  17 #include <mach/ixp2000-regs.h>
  18 #include <asm/delay.h>
  19 #include <asm/io.h>
  20 #include "ixp2400-msf.h"
  21
  22 /*
  23  * This is the Intel recommended PLL init procedure as described on
  24  * page 340 of the IXP2400/IXP2800 Programmer's Reference Manual.
  25  */
  26 static void ixp2400_pll_init(struct ixp2400_msf_parameters *mp)
  27 {
  28         int rx_dual_clock;
  29         int tx_dual_clock;
  30         u32 value;
  31
  32         /*
  33          * If the RX mode is not 1x32, we have to enable both RX PLLs
  34          * (#0 and #1.)  The same thing for the TX direction.
  35          */
  36         rx_dual_clock = !!(mp->rx_mode & IXP2400_RX_MODE_WIDTH_MASK);
  37         tx_dual_clock = !!(mp->tx_mode & IXP2400_TX_MODE_WIDTH_MASK);
  38
  39         /*
  40          * Read initial value.
  41          */
  42         value = ixp2000_reg_read(IXP2000_MSF_CLK_CNTRL);
  43
  44         /*
  45          * Put PLLs in powerdown and bypass mode.
  46          */
  47         value |= 0x0000f0f0;
  48         ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
  49
  50         /*
  51          * Set single or dual clock mode bits.
  52          */
  53         value &= ~0x03000000;
  54         value |= (rx_dual_clock << 24) | (tx_dual_clock << 25);
  55
  56         /*
  57          * Set multipliers.
  58          */
  59         value &= ~0x00ff0000;
  60         value |= mp->rxclk01_multiplier << 16;
  61         value |= mp->rxclk23_multiplier << 18;
  62         value |= mp->txclk01_multiplier << 20;
  63         value |= mp->txclk23_multiplier << 22;
  64
  65         /*
  66          * And write value.
  67          */
  68         ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
  69
  70         /*
  71          * Disable PLL bypass mode.
  72          */
  73         value &= ~(0x00005000 | rx_dual_clock << 13 | tx_dual_clock << 15);
  74         ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
  75
  76         /*
  77          * Turn on PLLs.
  78          */
  79         value &= ~(0x00000050 | rx_dual_clock << 5 | tx_dual_clock << 7);
  80         ixp2000_reg_write(IXP2000_MSF_CLK_CNTRL, value);
  81
  82         /*
  83          * Wait for PLLs to lock.  There are lock status bits, but IXP2400
  84          * erratum #65 says that these lock bits should not be relied upon
  85          * as they might not accurately reflect the true state of the PLLs.
  86          */
  87         udelay(100);
  88 }
  89
  90 /*
  91  * Needed according to p480 of Programmer's Reference Manual.
  92  */
  93 static void ixp2400_msf_free_rbuf_entries(struct ixp2400_msf_parameters *mp)
  94 {
  95         int size_bits;
  96         int i;
  97
  98         /*
  99          * Work around IXP2400 erratum #69 (silent RBUF-to-DRAM transfer
 100          * corruption) in the Intel-recommended way: do not add the RBUF
 101          * elements susceptible to corruption to the freelist.
 102          */
 103         size_bits = mp->rx_mode & IXP2400_RX_MODE_RBUF_SIZE_MASK;
 104         if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_64) {
 105                 for (i = 1; i < 128; i++) {
 106                         if (i == 9 || i == 18 || i == 27)
 107                                 continue;
 108                         ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
 109                 }
 110         } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_128) {
 111                 for (i = 1; i < 64; i++) {
 112                         if (i == 4 || i == 9 || i == 13)
 113                                 continue;
 114                         ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
 115                 }
 116         } else if (size_bits == IXP2400_RX_MODE_RBUF_SIZE_256) {
 117                 for (i = 1; i < 32; i++) {
 118                         if (i == 2 || i == 4 || i == 6)
 119                                 continue;
 120                         ixp2000_reg_write(IXP2000_MSF_RBUF_ELEMENT_DONE, i);
 121                 }
 122         }
 123 }
 124
 125 static u32 ixp2400_msf_valid_channels(u32 reg)
 126 {
 127         u32 channels;
 128
 129         channels = 0;
 130         switch (reg & IXP2400_RX_MODE_WIDTH_MASK) {
 131         case IXP2400_RX_MODE_1x32:
 132                 channels = 0x1;
 133                 if (reg & IXP2400_RX_MODE_MPHY &&
 134                     !(reg & IXP2400_RX_MODE_MPHY_32))
 135                         channels = 0xf;
 136                 break;
 137
 138         case IXP2400_RX_MODE_2x16:
 139                 channels = 0x5;
 140                 break;
 141
 142         case IXP2400_RX_MODE_4x8:
 143                 channels = 0xf;
 144                 break;
 145
 146         case IXP2400_RX_MODE_1x16_2x8:
 147                 channels = 0xd;
 148                 break;
 149         }
 150
 151         return channels;
 152 }
 153
 154 static void ixp2400_msf_enable_rx(struct ixp2400_msf_parameters *mp)
 155 {
 156         u32 value;
 157
 158         value = ixp2000_reg_read(IXP2000_MSF_RX_CONTROL) & 0x0fffffff;
 159         value |= ixp2400_msf_valid_channels(mp->rx_mode) << 28;
 160         ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, value);
 161 }
 162
 163 static void ixp2400_msf_enable_tx(struct ixp2400_msf_parameters *mp)
 164 {
 165         u32 value;
 166
 167         value = ixp2000_reg_read(IXP2000_MSF_TX_CONTROL) & 0x0fffffff;
 168         value |= ixp2400_msf_valid_channels(mp->tx_mode) << 28;
 169         ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, value);
 170 }
 171
 172
 173 void ixp2400_msf_init(struct ixp2400_msf_parameters *mp)
 174 {
 175         u32 value;
 176         int i;
 177
 178         /*
 179          * Init the RX/TX PLLs based on the passed parameter block.
 180          */
 181         ixp2400_pll_init(mp);
 182
 183         /*
 184          * Reset MSF.  Bit 7 in IXP_RESET_0 resets the MSF.
 185          */
 186         value = ixp2000_reg_read(IXP2000_RESET0);
 187         ixp2000_reg_write(IXP2000_RESET0, value | 0x80);
 188         ixp2000_reg_write(IXP2000_RESET0, value & ~0x80);
 189
 190         /*
 191          * Initialise the RX section.
 192          */
 193         ixp2000_reg_write(IXP2000_MSF_RX_MPHY_POLL_LIMIT, mp->rx_poll_ports - 1);
 194         ixp2000_reg_write(IXP2000_MSF_RX_CONTROL, mp->rx_mode);
 195         for (i = 0; i < 4; i++) {
 196                 ixp2000_reg_write(IXP2000_MSF_RX_UP_CONTROL_0 + i,
 197                                                 mp->rx_channel_mode[i]);
 198         }
 199         ixp2400_msf_free_rbuf_entries(mp);
 200         ixp2400_msf_enable_rx(mp);
 201
 202         /*
 203          * Initialise the TX section.
 204          */
 205         ixp2000_reg_write(IXP2000_MSF_TX_MPHY_POLL_LIMIT, mp->tx_poll_ports - 1);
 206         ixp2000_reg_write(IXP2000_MSF_TX_CONTROL, mp->tx_mode);
 207         for (i = 0; i < 4; i++) {
 208                 ixp2000_reg_write(IXP2000_MSF_TX_UP_CONTROL_0 + i,
 209                                                 mp->tx_channel_mode[i]);
 210         }
 211         ixp2400_msf_enable_tx(mp);
 212 }