Merge tag 'v3.3.7' into 3.3/master

[zen-stable.git] / drivers / net / wireless / iwlegacy / 4965-calib.c

/******************************************************************************
 *
 * This file is provided under a dual BSD/GPLv2 license.  When using or
 * redistributing this file, you may do so under either license.
 *
 * GPL LICENSE SUMMARY
 *
 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of version 2 of the GNU General Public License as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
 * USA
 *
 * The full GNU General Public License is included in this distribution
 * in the file called LICENSE.GPL.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 * BSD LICENSE
 *
 * Copyright(c) 2005 - 2011 Intel Corporation. All rights reserved.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 *
 *  * Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *  * Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in
 *    the documentation and/or other materials provided with the
 *    distribution.
 *  * Neither the name Intel Corporation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *****************************************************************************/

#include <linux/slab.h>
#include <net/mac80211.h>

#include "common.h"
#include "4965.h"

/*****************************************************************************
 * INIT calibrations framework
 *****************************************************************************/

struct stats_general_data {
        u32 beacon_silence_rssi_a;
        u32 beacon_silence_rssi_b;
        u32 beacon_silence_rssi_c;
        u32 beacon_energy_a;
        u32 beacon_energy_b;
        u32 beacon_energy_c;
};

void
il4965_calib_free_results(struct il_priv *il)
{
        int i;

        for (i = 0; i < IL_CALIB_MAX; i++) {
                kfree(il->calib_results[i].buf);
                il->calib_results[i].buf = NULL;
                il->calib_results[i].buf_len = 0;
        }
}

/*****************************************************************************
 * RUNTIME calibrations framework
 *****************************************************************************/

/* "false alarms" are signals that our DSP tries to lock onto,
 *   but then determines that they are either noise, or transmissions
 *   from a distant wireless network (also "noise", really) that get
 *   "stepped on" by stronger transmissions within our own network.
 * This algorithm attempts to set a sensitivity level that is high
 *   enough to receive all of our own network traffic, but not so
 *   high that our DSP gets too busy trying to lock onto non-network
 *   activity/noise. */
static int
il4965_sens_energy_cck(struct il_priv *il, u32 norm_fa, u32 rx_enable_time,
                       struct stats_general_data *rx_info)
{
        u32 max_nrg_cck = 0;
        int i = 0;
        u8 max_silence_rssi = 0;
        u32 silence_ref = 0;
        u8 silence_rssi_a = 0;
        u8 silence_rssi_b = 0;
        u8 silence_rssi_c = 0;
        u32 val;

        /* "false_alarms" values below are cross-multiplications to assess the
         *   numbers of false alarms within the measured period of actual Rx
         *   (Rx is off when we're txing), vs the min/max expected false alarms
         *   (some should be expected if rx is sensitive enough) in a
         *   hypothetical listening period of 200 time units (TU), 204.8 msec:
         *
         * MIN_FA/fixed-time < false_alarms/actual-rx-time < MAX_FA/beacon-time
         *
         * */
        u32 false_alarms = norm_fa * 200 * 1024;
        u32 max_false_alarms = MAX_FA_CCK * rx_enable_time;
        u32 min_false_alarms = MIN_FA_CCK * rx_enable_time;
        struct il_sensitivity_data *data = NULL;
        const struct il_sensitivity_ranges *ranges = il->hw_params.sens;

        data = &(il->sensitivity_data);

        data->nrg_auto_corr_silence_diff = 0;

        /* Find max silence rssi among all 3 receivers.
         * This is background noise, which may include transmissions from other
         *    networks, measured during silence before our network's beacon */
        silence_rssi_a =
            (u8) ((rx_info->beacon_silence_rssi_a & ALL_BAND_FILTER) >> 8);
        silence_rssi_b =
            (u8) ((rx_info->beacon_silence_rssi_b & ALL_BAND_FILTER) >> 8);
        silence_rssi_c =
            (u8) ((rx_info->beacon_silence_rssi_c & ALL_BAND_FILTER) >> 8);

        val = max(silence_rssi_b, silence_rssi_c);
        max_silence_rssi = max(silence_rssi_a, (u8) val);

        /* Store silence rssi in 20-beacon history table */
        data->nrg_silence_rssi[data->nrg_silence_idx] = max_silence_rssi;
        data->nrg_silence_idx++;
        if (data->nrg_silence_idx >= NRG_NUM_PREV_STAT_L)
                data->nrg_silence_idx = 0;

        /* Find max silence rssi across 20 beacon history */
        for (i = 0; i < NRG_NUM_PREV_STAT_L; i++) {
                val = data->nrg_silence_rssi[i];
                silence_ref = max(silence_ref, val);
        }
        D_CALIB("silence a %u, b %u, c %u, 20-bcn max %u\n", silence_rssi_a,
                silence_rssi_b, silence_rssi_c, silence_ref);

        /* Find max rx energy (min value!) among all 3 receivers,
         *   measured during beacon frame.
         * Save it in 10-beacon history table. */
        i = data->nrg_energy_idx;
        val = min(rx_info->beacon_energy_b, rx_info->beacon_energy_c);
        data->nrg_value[i] = min(rx_info->beacon_energy_a, val);

        data->nrg_energy_idx++;
        if (data->nrg_energy_idx >= 10)
                data->nrg_energy_idx = 0;

        /* Find min rx energy (max value) across 10 beacon history.
         * This is the minimum signal level that we want to receive well.
         * Add backoff (margin so we don't miss slightly lower energy frames).
         * This establishes an upper bound (min value) for energy threshold. */
        max_nrg_cck = data->nrg_value[0];
        for (i = 1; i < 10; i++)
                max_nrg_cck = (u32) max(max_nrg_cck, (data->nrg_value[i]));
        max_nrg_cck += 6;

        D_CALIB("rx energy a %u, b %u, c %u, 10-bcn max/min %u\n",
                rx_info->beacon_energy_a, rx_info->beacon_energy_b,
                rx_info->beacon_energy_c, max_nrg_cck - 6);

        /* Count number of consecutive beacons with fewer-than-desired
         *   false alarms. */
        if (false_alarms < min_false_alarms)
                data->num_in_cck_no_fa++;
        else
                data->num_in_cck_no_fa = 0;
        D_CALIB("consecutive bcns with few false alarms = %u\n",
                data->num_in_cck_no_fa);

        /* If we got too many false alarms this time, reduce sensitivity */
        if (false_alarms > max_false_alarms &&
            data->auto_corr_cck > AUTO_CORR_MAX_TH_CCK) {
                D_CALIB("norm FA %u > max FA %u\n", false_alarms,
                        max_false_alarms);
                D_CALIB("... reducing sensitivity\n");
                data->nrg_curr_state = IL_FA_TOO_MANY;
                /* Store for "fewer than desired" on later beacon */
                data->nrg_silence_ref = silence_ref;

                /* increase energy threshold (reduce nrg value)
                 *   to decrease sensitivity */
                data->nrg_th_cck = data->nrg_th_cck - NRG_STEP_CCK;
                /* Else if we got fewer than desired, increase sensitivity */
        } else if (false_alarms < min_false_alarms) {
                data->nrg_curr_state = IL_FA_TOO_FEW;

                /* Compare silence level with silence level for most recent
                 *   healthy number or too many false alarms */
                data->nrg_auto_corr_silence_diff =
                    (s32) data->nrg_silence_ref - (s32) silence_ref;

                D_CALIB("norm FA %u < min FA %u, silence diff %d\n",
                        false_alarms, min_false_alarms,
                        data->nrg_auto_corr_silence_diff);

                /* Increase value to increase sensitivity, but only if:
                 * 1a) previous beacon did *not* have *too many* false alarms
                 * 1b) AND there's a significant difference in Rx levels
                 *      from a previous beacon with too many, or healthy # FAs
                 * OR 2) We've seen a lot of beacons (100) with too few
                 *       false alarms */
                if (data->nrg_prev_state != IL_FA_TOO_MANY &&
                    (data->nrg_auto_corr_silence_diff > NRG_DIFF ||
                     data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA)) {

                        D_CALIB("... increasing sensitivity\n");
                        /* Increase nrg value to increase sensitivity */
                        val = data->nrg_th_cck + NRG_STEP_CCK;
                        data->nrg_th_cck = min((u32) ranges->min_nrg_cck, val);
                } else {
                        D_CALIB("... but not changing sensitivity\n");
                }

                /* Else we got a healthy number of false alarms, keep status quo */
        } else {
                D_CALIB(" FA in safe zone\n");
                data->nrg_curr_state = IL_FA_GOOD_RANGE;

                /* Store for use in "fewer than desired" with later beacon */
                data->nrg_silence_ref = silence_ref;

                /* If previous beacon had too many false alarms,
                 *   give it some extra margin by reducing sensitivity again
                 *   (but don't go below measured energy of desired Rx) */
                if (IL_FA_TOO_MANY == data->nrg_prev_state) {
                        D_CALIB("... increasing margin\n");
                        if (data->nrg_th_cck > (max_nrg_cck + NRG_MARGIN))
                                data->nrg_th_cck -= NRG_MARGIN;
                        else
                                data->nrg_th_cck = max_nrg_cck;
                }
        }

        /* Make sure the energy threshold does not go above the measured
         * energy of the desired Rx signals (reduced by backoff margin),
         * or else we might start missing Rx frames.
         * Lower value is higher energy, so we use max()!
         */
        data->nrg_th_cck = max(max_nrg_cck, data->nrg_th_cck);
        D_CALIB("new nrg_th_cck %u\n", data->nrg_th_cck);

        data->nrg_prev_state = data->nrg_curr_state;

        /* Auto-correlation CCK algorithm */
        if (false_alarms > min_false_alarms) {

                /* increase auto_corr values to decrease sensitivity
                 * so the DSP won't be disturbed by the noise
                 */
                if (data->auto_corr_cck < AUTO_CORR_MAX_TH_CCK)
                        data->auto_corr_cck = AUTO_CORR_MAX_TH_CCK + 1;
                else {
                        val = data->auto_corr_cck + AUTO_CORR_STEP_CCK;
                        data->auto_corr_cck =
                            min((u32) ranges->auto_corr_max_cck, val);
                }
                val = data->auto_corr_cck_mrc + AUTO_CORR_STEP_CCK;
                data->auto_corr_cck_mrc =
                    min((u32) ranges->auto_corr_max_cck_mrc, val);
        } else if (false_alarms < min_false_alarms &&
                   (data->nrg_auto_corr_silence_diff > NRG_DIFF ||
                    data->num_in_cck_no_fa > MAX_NUMBER_CCK_NO_FA)) {

                /* Decrease auto_corr values to increase sensitivity */
                val = data->auto_corr_cck - AUTO_CORR_STEP_CCK;
                data->auto_corr_cck = max((u32) ranges->auto_corr_min_cck, val);
                val = data->auto_corr_cck_mrc - AUTO_CORR_STEP_CCK;
                data->auto_corr_cck_mrc =
                    max((u32) ranges->auto_corr_min_cck_mrc, val);
        }

        return 0;
}

static int
il4965_sens_auto_corr_ofdm(struct il_priv *il, u32 norm_fa, u32 rx_enable_time)
{
        u32 val;
        u32 false_alarms = norm_fa * 200 * 1024;
        u32 max_false_alarms = MAX_FA_OFDM * rx_enable_time;
        u32 min_false_alarms = MIN_FA_OFDM * rx_enable_time;
        struct il_sensitivity_data *data = NULL;
        const struct il_sensitivity_ranges *ranges = il->hw_params.sens;

        data = &(il->sensitivity_data);

        /* If we got too many false alarms this time, reduce sensitivity */
        if (false_alarms > max_false_alarms) {

                D_CALIB("norm FA %u > max FA %u)\n", false_alarms,
                        max_false_alarms);

                val = data->auto_corr_ofdm + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm =
                    min((u32) ranges->auto_corr_max_ofdm, val);

                val = data->auto_corr_ofdm_mrc + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc =
                    min((u32) ranges->auto_corr_max_ofdm_mrc, val);

                val = data->auto_corr_ofdm_x1 + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_x1 =
                    min((u32) ranges->auto_corr_max_ofdm_x1, val);

                val = data->auto_corr_ofdm_mrc_x1 + AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc_x1 =
                    min((u32) ranges->auto_corr_max_ofdm_mrc_x1, val);
        }

        /* Else if we got fewer than desired, increase sensitivity */
        else if (false_alarms < min_false_alarms) {

                D_CALIB("norm FA %u < min FA %u\n", false_alarms,
                        min_false_alarms);

                val = data->auto_corr_ofdm - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm =
                    max((u32) ranges->auto_corr_min_ofdm, val);

                val = data->auto_corr_ofdm_mrc - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc =
                    max((u32) ranges->auto_corr_min_ofdm_mrc, val);

                val = data->auto_corr_ofdm_x1 - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_x1 =
                    max((u32) ranges->auto_corr_min_ofdm_x1, val);

                val = data->auto_corr_ofdm_mrc_x1 - AUTO_CORR_STEP_OFDM;
                data->auto_corr_ofdm_mrc_x1 =
                    max((u32) ranges->auto_corr_min_ofdm_mrc_x1, val);
        } else {
                D_CALIB("min FA %u < norm FA %u < max FA %u OK\n",
                        min_false_alarms, false_alarms, max_false_alarms);
        }
        return 0;
}

static void
il4965_prepare_legacy_sensitivity_tbl(struct il_priv *il,
                                      struct il_sensitivity_data *data,
                                      __le16 *tbl)
{
        tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_IDX] =
            cpu_to_le16((u16) data->auto_corr_ofdm);
        tbl[HD_AUTO_CORR32_X4_TH_ADD_MIN_MRC_IDX] =
            cpu_to_le16((u16) data->auto_corr_ofdm_mrc);
        tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_IDX] =
            cpu_to_le16((u16) data->auto_corr_ofdm_x1);
        tbl[HD_AUTO_CORR32_X1_TH_ADD_MIN_MRC_IDX] =
            cpu_to_le16((u16) data->auto_corr_ofdm_mrc_x1);

        tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_IDX] =
            cpu_to_le16((u16) data->auto_corr_cck);
        tbl[HD_AUTO_CORR40_X4_TH_ADD_MIN_MRC_IDX] =
            cpu_to_le16((u16) data->auto_corr_cck_mrc);

        tbl[HD_MIN_ENERGY_CCK_DET_IDX] = cpu_to_le16((u16) data->nrg_th_cck);
        tbl[HD_MIN_ENERGY_OFDM_DET_IDX] = cpu_to_le16((u16) data->nrg_th_ofdm);

        tbl[HD_BARKER_CORR_TH_ADD_MIN_IDX] =
            cpu_to_le16(data->barker_corr_th_min);
        tbl[HD_BARKER_CORR_TH_ADD_MIN_MRC_IDX] =
            cpu_to_le16(data->barker_corr_th_min_mrc);
        tbl[HD_OFDM_ENERGY_TH_IN_IDX] = cpu_to_le16(data->nrg_th_cca);

        D_CALIB("ofdm: ac %u mrc %u x1 %u mrc_x1 %u thresh %u\n",
                data->auto_corr_ofdm, data->auto_corr_ofdm_mrc,
                data->auto_corr_ofdm_x1, data->auto_corr_ofdm_mrc_x1,
                data->nrg_th_ofdm);

        D_CALIB("cck: ac %u mrc %u thresh %u\n", data->auto_corr_cck,
                data->auto_corr_cck_mrc, data->nrg_th_cck);
}

/* Prepare a C_SENSITIVITY, send to uCode if values have changed */
static int
il4965_sensitivity_write(struct il_priv *il)
{
        struct il_sensitivity_cmd cmd;
        struct il_sensitivity_data *data = NULL;
        struct il_host_cmd cmd_out = {
                .id = C_SENSITIVITY,
                .len = sizeof(struct il_sensitivity_cmd),
                .flags = CMD_ASYNC,
                .data = &cmd,
        };

        data = &(il->sensitivity_data);

        memset(&cmd, 0, sizeof(cmd));

        il4965_prepare_legacy_sensitivity_tbl(il, data, &cmd.table[0]);

        /* Update uCode's "work" table, and copy it to DSP */
        cmd.control = C_SENSITIVITY_CONTROL_WORK_TBL;

        /* Don't send command to uCode if nothing has changed */
        if (!memcmp
            (&cmd.table[0], &(il->sensitivity_tbl[0]),
             sizeof(u16) * HD_TBL_SIZE)) {
                D_CALIB("No change in C_SENSITIVITY\n");
                return 0;
        }

        /* Copy table for comparison next time */
        memcpy(&(il->sensitivity_tbl[0]), &(cmd.table[0]),
               sizeof(u16) * HD_TBL_SIZE);

        return il_send_cmd(il, &cmd_out);
}

void
il4965_init_sensitivity(struct il_priv *il)
{
        int ret = 0;
        int i;
        struct il_sensitivity_data *data = NULL;
        const struct il_sensitivity_ranges *ranges = il->hw_params.sens;

        if (il->disable_sens_cal)
                return;

        D_CALIB("Start il4965_init_sensitivity\n");

        /* Clear driver's sensitivity algo data */
        data = &(il->sensitivity_data);

        if (ranges == NULL)
                return;

        memset(data, 0, sizeof(struct il_sensitivity_data));

        data->num_in_cck_no_fa = 0;
        data->nrg_curr_state = IL_FA_TOO_MANY;
        data->nrg_prev_state = IL_FA_TOO_MANY;
        data->nrg_silence_ref = 0;
        data->nrg_silence_idx = 0;
        data->nrg_energy_idx = 0;

        for (i = 0; i < 10; i++)
                data->nrg_value[i] = 0;

        for (i = 0; i < NRG_NUM_PREV_STAT_L; i++)
                data->nrg_silence_rssi[i] = 0;

        data->auto_corr_ofdm = ranges->auto_corr_min_ofdm;
        data->auto_corr_ofdm_mrc = ranges->auto_corr_min_ofdm_mrc;
        data->auto_corr_ofdm_x1 = ranges->auto_corr_min_ofdm_x1;
        data->auto_corr_ofdm_mrc_x1 = ranges->auto_corr_min_ofdm_mrc_x1;
        data->auto_corr_cck = AUTO_CORR_CCK_MIN_VAL_DEF;
        data->auto_corr_cck_mrc = ranges->auto_corr_min_cck_mrc;
        data->nrg_th_cck = ranges->nrg_th_cck;
        data->nrg_th_ofdm = ranges->nrg_th_ofdm;
        data->barker_corr_th_min = ranges->barker_corr_th_min;
        data->barker_corr_th_min_mrc = ranges->barker_corr_th_min_mrc;
        data->nrg_th_cca = ranges->nrg_th_cca;

        data->last_bad_plcp_cnt_ofdm = 0;
        data->last_fa_cnt_ofdm = 0;
        data->last_bad_plcp_cnt_cck = 0;
        data->last_fa_cnt_cck = 0;

        ret |= il4965_sensitivity_write(il);
        D_CALIB("<<return 0x%X\n", ret);
}

void
il4965_sensitivity_calibration(struct il_priv *il, void *resp)
{
        u32 rx_enable_time;
        u32 fa_cck;
        u32 fa_ofdm;
        u32 bad_plcp_cck;
        u32 bad_plcp_ofdm;
        u32 norm_fa_ofdm;
        u32 norm_fa_cck;
        struct il_sensitivity_data *data = NULL;
        struct stats_rx_non_phy *rx_info;
        struct stats_rx_phy *ofdm, *cck;
        unsigned long flags;
        struct stats_general_data statis;

        if (il->disable_sens_cal)
                return;

        data = &(il->sensitivity_data);

        if (!il_is_any_associated(il)) {
                D_CALIB("<< - not associated\n");
                return;
        }

        spin_lock_irqsave(&il->lock, flags);

        rx_info = &(((struct il_notif_stats *)resp)->rx.general);
        ofdm = &(((struct il_notif_stats *)resp)->rx.ofdm);
        cck = &(((struct il_notif_stats *)resp)->rx.cck);

        if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
                D_CALIB("<< invalid data.\n");
                spin_unlock_irqrestore(&il->lock, flags);
                return;
        }

        /* Extract Statistics: */
        rx_enable_time = le32_to_cpu(rx_info->channel_load);
        fa_cck = le32_to_cpu(cck->false_alarm_cnt);
        fa_ofdm = le32_to_cpu(ofdm->false_alarm_cnt);
        bad_plcp_cck = le32_to_cpu(cck->plcp_err);
        bad_plcp_ofdm = le32_to_cpu(ofdm->plcp_err);

        statis.beacon_silence_rssi_a =
            le32_to_cpu(rx_info->beacon_silence_rssi_a);
        statis.beacon_silence_rssi_b =
            le32_to_cpu(rx_info->beacon_silence_rssi_b);
        statis.beacon_silence_rssi_c =
            le32_to_cpu(rx_info->beacon_silence_rssi_c);
        statis.beacon_energy_a = le32_to_cpu(rx_info->beacon_energy_a);
        statis.beacon_energy_b = le32_to_cpu(rx_info->beacon_energy_b);
        statis.beacon_energy_c = le32_to_cpu(rx_info->beacon_energy_c);

        spin_unlock_irqrestore(&il->lock, flags);

        D_CALIB("rx_enable_time = %u usecs\n", rx_enable_time);

        if (!rx_enable_time) {
                D_CALIB("<< RX Enable Time == 0!\n");
                return;
        }

        /* These stats increase monotonically, and do not reset
         *   at each beacon.  Calculate difference from last value, or just
         *   use the new stats value if it has reset or wrapped around. */
        if (data->last_bad_plcp_cnt_cck > bad_plcp_cck)
                data->last_bad_plcp_cnt_cck = bad_plcp_cck;
        else {
                bad_plcp_cck -= data->last_bad_plcp_cnt_cck;
                data->last_bad_plcp_cnt_cck += bad_plcp_cck;
        }

        if (data->last_bad_plcp_cnt_ofdm > bad_plcp_ofdm)
                data->last_bad_plcp_cnt_ofdm = bad_plcp_ofdm;
        else {
                bad_plcp_ofdm -= data->last_bad_plcp_cnt_ofdm;
                data->last_bad_plcp_cnt_ofdm += bad_plcp_ofdm;
        }

        if (data->last_fa_cnt_ofdm > fa_ofdm)
                data->last_fa_cnt_ofdm = fa_ofdm;
        else {
                fa_ofdm -= data->last_fa_cnt_ofdm;
                data->last_fa_cnt_ofdm += fa_ofdm;
        }

        if (data->last_fa_cnt_cck > fa_cck)
                data->last_fa_cnt_cck = fa_cck;
        else {
                fa_cck -= data->last_fa_cnt_cck;
                data->last_fa_cnt_cck += fa_cck;
        }

        /* Total aborted signal locks */
        norm_fa_ofdm = fa_ofdm + bad_plcp_ofdm;
        norm_fa_cck = fa_cck + bad_plcp_cck;

        D_CALIB("cck: fa %u badp %u  ofdm: fa %u badp %u\n", fa_cck,
                bad_plcp_cck, fa_ofdm, bad_plcp_ofdm);

        il4965_sens_auto_corr_ofdm(il, norm_fa_ofdm, rx_enable_time);
        il4965_sens_energy_cck(il, norm_fa_cck, rx_enable_time, &statis);

        il4965_sensitivity_write(il);
}

static inline u8
il4965_find_first_chain(u8 mask)
{
        if (mask & ANT_A)
                return CHAIN_A;
        if (mask & ANT_B)
                return CHAIN_B;
        return CHAIN_C;
}

/**
 * Run disconnected antenna algorithm to find out which antennas are
 * disconnected.
 */
static void
il4965_find_disconn_antenna(struct il_priv *il, u32 * average_sig,
                            struct il_chain_noise_data *data)
{
        u32 active_chains = 0;
        u32 max_average_sig;
        u16 max_average_sig_antenna_i;
        u8 num_tx_chains;
        u8 first_chain;
        u16 i = 0;

        average_sig[0] =
            data->chain_signal_a /
            il->cfg->base_params->chain_noise_num_beacons;
        average_sig[1] =
            data->chain_signal_b /
            il->cfg->base_params->chain_noise_num_beacons;
        average_sig[2] =
            data->chain_signal_c /
            il->cfg->base_params->chain_noise_num_beacons;

        if (average_sig[0] >= average_sig[1]) {
                max_average_sig = average_sig[0];
                max_average_sig_antenna_i = 0;
                active_chains = (1 << max_average_sig_antenna_i);
        } else {
                max_average_sig = average_sig[1];
                max_average_sig_antenna_i = 1;
                active_chains = (1 << max_average_sig_antenna_i);
        }

        if (average_sig[2] >= max_average_sig) {
                max_average_sig = average_sig[2];
                max_average_sig_antenna_i = 2;
                active_chains = (1 << max_average_sig_antenna_i);
        }

        D_CALIB("average_sig: a %d b %d c %d\n", average_sig[0], average_sig[1],
                average_sig[2]);
        D_CALIB("max_average_sig = %d, antenna %d\n", max_average_sig,
                max_average_sig_antenna_i);

        /* Compare signal strengths for all 3 receivers. */
        for (i = 0; i < NUM_RX_CHAINS; i++) {
                if (i != max_average_sig_antenna_i) {
                        s32 rssi_delta = (max_average_sig - average_sig[i]);

                        /* If signal is very weak, compared with
                         * strongest, mark it as disconnected. */
                        if (rssi_delta > MAXIMUM_ALLOWED_PATHLOSS)
                                data->disconn_array[i] = 1;
                        else
                                active_chains |= (1 << i);
                        D_CALIB("i = %d  rssiDelta = %d  "
                                "disconn_array[i] = %d\n", i, rssi_delta,
                                data->disconn_array[i]);
                }
        }

        /*
         * The above algorithm sometimes fails when the ucode
         * reports 0 for all chains. It's not clear why that
         * happens to start with, but it is then causing trouble
         * because this can make us enable more chains than the
         * hardware really has.
         *
         * To be safe, simply mask out any chains that we know
         * are not on the device.
         */
        active_chains &= il->hw_params.valid_rx_ant;

        num_tx_chains = 0;
        for (i = 0; i < NUM_RX_CHAINS; i++) {
                /* loops on all the bits of
                 * il->hw_setting.valid_tx_ant */
                u8 ant_msk = (1 << i);
                if (!(il->hw_params.valid_tx_ant & ant_msk))
                        continue;

                num_tx_chains++;
                if (data->disconn_array[i] == 0)
                        /* there is a Tx antenna connected */
                        break;
                if (num_tx_chains == il->hw_params.tx_chains_num &&
                    data->disconn_array[i]) {
                        /*
                         * If all chains are disconnected
                         * connect the first valid tx chain
                         */
                        first_chain =
                            il4965_find_first_chain(il->cfg->valid_tx_ant);
                        data->disconn_array[first_chain] = 0;
                        active_chains |= BIT(first_chain);
                        D_CALIB("All Tx chains are disconnected"
                                "- declare %d as connected\n", first_chain);
                        break;
                }
        }

        if (active_chains != il->hw_params.valid_rx_ant &&
            active_chains != il->chain_noise_data.active_chains)
                D_CALIB("Detected that not all antennas are connected! "
                        "Connected: %#x, valid: %#x.\n", active_chains,
                        il->hw_params.valid_rx_ant);

        /* Save for use within RXON, TX, SCAN commands, etc. */
        data->active_chains = active_chains;
        D_CALIB("active_chains (bitwise) = 0x%x\n", active_chains);
}

static void
il4965_gain_computation(struct il_priv *il, u32 * average_noise,
                        u16 min_average_noise_antenna_i, u32 min_average_noise,
                        u8 default_chain)
{
        int i, ret;
        struct il_chain_noise_data *data = &il->chain_noise_data;

        data->delta_gain_code[min_average_noise_antenna_i] = 0;

        for (i = default_chain; i < NUM_RX_CHAINS; i++) {
                s32 delta_g = 0;

                if (!data->disconn_array[i] &&
                    data->delta_gain_code[i] ==
                    CHAIN_NOISE_DELTA_GAIN_INIT_VAL) {
                        delta_g = average_noise[i] - min_average_noise;
                        data->delta_gain_code[i] = (u8) ((delta_g * 10) / 15);
                        data->delta_gain_code[i] =
                            min(data->delta_gain_code[i],
                                (u8) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);

                        data->delta_gain_code[i] =
                            (data->delta_gain_code[i] | (1 << 2));
                } else {
                        data->delta_gain_code[i] = 0;
                }
        }
        D_CALIB("delta_gain_codes: a %d b %d c %d\n", data->delta_gain_code[0],
                data->delta_gain_code[1], data->delta_gain_code[2]);

        /* Differential gain gets sent to uCode only once */
        if (!data->radio_write) {
                struct il_calib_diff_gain_cmd cmd;
                data->radio_write = 1;

                memset(&cmd, 0, sizeof(cmd));
                cmd.hdr.op_code = IL_PHY_CALIBRATE_DIFF_GAIN_CMD;
                cmd.diff_gain_a = data->delta_gain_code[0];
                cmd.diff_gain_b = data->delta_gain_code[1];
                cmd.diff_gain_c = data->delta_gain_code[2];
                ret = il_send_cmd_pdu(il, C_PHY_CALIBRATION, sizeof(cmd), &cmd);
                if (ret)
                        D_CALIB("fail sending cmd " "C_PHY_CALIBRATION\n");

                /* TODO we might want recalculate
                 * rx_chain in rxon cmd */

                /* Mark so we run this algo only once! */
                data->state = IL_CHAIN_NOISE_CALIBRATED;
        }
}

/*
 * Accumulate 16 beacons of signal and noise stats for each of
 *   3 receivers/antennas/rx-chains, then figure out:
 * 1)  Which antennas are connected.
 * 2)  Differential rx gain settings to balance the 3 receivers.
 */
void
il4965_chain_noise_calibration(struct il_priv *il, void *stat_resp)
{
        struct il_chain_noise_data *data = NULL;

        u32 chain_noise_a;
        u32 chain_noise_b;
        u32 chain_noise_c;
        u32 chain_sig_a;
        u32 chain_sig_b;
        u32 chain_sig_c;
        u32 average_sig[NUM_RX_CHAINS] = { INITIALIZATION_VALUE };
        u32 average_noise[NUM_RX_CHAINS] = { INITIALIZATION_VALUE };
        u32 min_average_noise = MIN_AVERAGE_NOISE_MAX_VALUE;
        u16 min_average_noise_antenna_i = INITIALIZATION_VALUE;
        u16 i = 0;
        u16 rxon_chnum = INITIALIZATION_VALUE;
        u16 stat_chnum = INITIALIZATION_VALUE;
        u8 rxon_band24;
        u8 stat_band24;
        unsigned long flags;
        struct stats_rx_non_phy *rx_info;

        struct il_rxon_context *ctx = &il->ctx;

        if (il->disable_chain_noise_cal)
                return;

        data = &(il->chain_noise_data);

        /*
         * Accumulate just the first "chain_noise_num_beacons" after
         * the first association, then we're done forever.
         */
        if (data->state != IL_CHAIN_NOISE_ACCUMULATE) {
                if (data->state == IL_CHAIN_NOISE_ALIVE)
                        D_CALIB("Wait for noise calib reset\n");
                return;
        }

        spin_lock_irqsave(&il->lock, flags);

        rx_info = &(((struct il_notif_stats *)stat_resp)->rx.general);

        if (rx_info->interference_data_flag != INTERFERENCE_DATA_AVAILABLE) {
                D_CALIB(" << Interference data unavailable\n");
                spin_unlock_irqrestore(&il->lock, flags);
                return;
        }

        rxon_band24 = !!(ctx->staging.flags & RXON_FLG_BAND_24G_MSK);
        rxon_chnum = le16_to_cpu(ctx->staging.channel);

        stat_band24 =
            !!(((struct il_notif_stats *)stat_resp)->
               flag & STATS_REPLY_FLG_BAND_24G_MSK);
        stat_chnum =
            le32_to_cpu(((struct il_notif_stats *)stat_resp)->flag) >> 16;

        /* Make sure we accumulate data for just the associated channel
         *   (even if scanning). */
        if (rxon_chnum != stat_chnum || rxon_band24 != stat_band24) {
                D_CALIB("Stats not from chan=%d, band24=%d\n", rxon_chnum,
                        rxon_band24);
                spin_unlock_irqrestore(&il->lock, flags);
                return;
        }

        /*
         *  Accumulate beacon stats values across
         * "chain_noise_num_beacons"
         */
        chain_noise_a =
            le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
        chain_noise_b =
            le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
        chain_noise_c =
            le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;

        chain_sig_a = le32_to_cpu(rx_info->beacon_rssi_a) & IN_BAND_FILTER;
        chain_sig_b = le32_to_cpu(rx_info->beacon_rssi_b) & IN_BAND_FILTER;
        chain_sig_c = le32_to_cpu(rx_info->beacon_rssi_c) & IN_BAND_FILTER;

        spin_unlock_irqrestore(&il->lock, flags);

        data->beacon_count++;

        data->chain_noise_a = (chain_noise_a + data->chain_noise_a);
        data->chain_noise_b = (chain_noise_b + data->chain_noise_b);
        data->chain_noise_c = (chain_noise_c + data->chain_noise_c);

        data->chain_signal_a = (chain_sig_a + data->chain_signal_a);
        data->chain_signal_b = (chain_sig_b + data->chain_signal_b);
        data->chain_signal_c = (chain_sig_c + data->chain_signal_c);

        D_CALIB("chan=%d, band24=%d, beacon=%d\n", rxon_chnum, rxon_band24,
                data->beacon_count);
        D_CALIB("chain_sig: a %d b %d c %d\n", chain_sig_a, chain_sig_b,
                chain_sig_c);
        D_CALIB("chain_noise: a %d b %d c %d\n", chain_noise_a, chain_noise_b,
                chain_noise_c);

        /* If this is the "chain_noise_num_beacons", determine:
         * 1)  Disconnected antennas (using signal strengths)
         * 2)  Differential gain (using silence noise) to balance receivers */
        if (data->beacon_count != il->cfg->base_params->chain_noise_num_beacons)
                return;

        /* Analyze signal for disconnected antenna */
        il4965_find_disconn_antenna(il, average_sig, data);

        /* Analyze noise for rx balance */
        average_noise[0] =
            data->chain_noise_a / il->cfg->base_params->chain_noise_num_beacons;
        average_noise[1] =
            data->chain_noise_b / il->cfg->base_params->chain_noise_num_beacons;
        average_noise[2] =
            data->chain_noise_c / il->cfg->base_params->chain_noise_num_beacons;

        for (i = 0; i < NUM_RX_CHAINS; i++) {
                if (!data->disconn_array[i] &&
                    average_noise[i] <= min_average_noise) {
                        /* This means that chain i is active and has
                         * lower noise values so far: */
                        min_average_noise = average_noise[i];
                        min_average_noise_antenna_i = i;
                }
        }

        D_CALIB("average_noise: a %d b %d c %d\n", average_noise[0],
                average_noise[1], average_noise[2]);

        D_CALIB("min_average_noise = %d, antenna %d\n", min_average_noise,
                min_average_noise_antenna_i);

        il4965_gain_computation(il, average_noise, min_average_noise_antenna_i,
                                min_average_noise,
                                il4965_find_first_chain(il->cfg->valid_rx_ant));

        /* Some power changes may have been made during the calibration.
         * Update and commit the RXON
         */
        if (il->cfg->ops->lib->update_chain_flags)
                il->cfg->ops->lib->update_chain_flags(il);

        data->state = IL_CHAIN_NOISE_DONE;
        il_power_update_mode(il, false);
}

void
il4965_reset_run_time_calib(struct il_priv *il)
{
        int i;
        memset(&(il->sensitivity_data), 0, sizeof(struct il_sensitivity_data));
        memset(&(il->chain_noise_data), 0, sizeof(struct il_chain_noise_data));
        for (i = 0; i < NUM_RX_CHAINS; i++)
                il->chain_noise_data.delta_gain_code[i] =
                    CHAIN_NOISE_DELTA_GAIN_INIT_VAL;

        /* Ask for stats now, the uCode will send notification
         * periodically after association */
        il_send_stats_request(il, CMD_ASYNC, true);
}