1 /*******************************************************************
2 * This file is part of the Emulex Linux Device Driver for *
3 * Fibre Channel Host Bus Adapters. *
4 * Copyright (C) 2004-2011 Emulex. All rights reserved. *
5 * EMULEX and SLI are trademarks of Emulex. *
7 * Portions Copyright (C) 2004-2005 Christoph Hellwig *
9 * This program is free software; you can redistribute it and/or *
10 * modify it under the terms of version 2 of the GNU General *
11 * Public License as published by the Free Software Foundation. *
12 * This program is distributed in the hope that it will be useful. *
13 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
14 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
15 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
16 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
17 * TO BE LEGALLY INVALID. See the GNU General Public License for *
18 * more details, a copy of which can be found in the file COPYING *
19 * included with this package. *
20 *******************************************************************/
22 #include <linux/blkdev.h>
23 #include <linux/delay.h>
24 #include <linux/slab.h>
25 #include <linux/pci.h>
26 #include <linux/kthread.h>
27 #include <linux/interrupt.h>
29 #include <scsi/scsi.h>
30 #include <scsi/scsi_device.h>
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_transport_fc.h>
37 #include "lpfc_disc.h"
39 #include "lpfc_sli4.h"
40 #include "lpfc_scsi.h"
42 #include "lpfc_logmsg.h"
43 #include "lpfc_crtn.h"
44 #include "lpfc_vport.h"
45 #include "lpfc_debugfs.h"
47 /* AlpaArray for assignment of scsid for scan-down and bind_method */
48 static uint8_t lpfcAlpaArray
[] = {
49 0xEF, 0xE8, 0xE4, 0xE2, 0xE1, 0xE0, 0xDC, 0xDA, 0xD9, 0xD6,
50 0xD5, 0xD4, 0xD3, 0xD2, 0xD1, 0xCE, 0xCD, 0xCC, 0xCB, 0xCA,
51 0xC9, 0xC7, 0xC6, 0xC5, 0xC3, 0xBC, 0xBA, 0xB9, 0xB6, 0xB5,
52 0xB4, 0xB3, 0xB2, 0xB1, 0xAE, 0xAD, 0xAC, 0xAB, 0xAA, 0xA9,
53 0xA7, 0xA6, 0xA5, 0xA3, 0x9F, 0x9E, 0x9D, 0x9B, 0x98, 0x97,
54 0x90, 0x8F, 0x88, 0x84, 0x82, 0x81, 0x80, 0x7C, 0x7A, 0x79,
55 0x76, 0x75, 0x74, 0x73, 0x72, 0x71, 0x6E, 0x6D, 0x6C, 0x6B,
56 0x6A, 0x69, 0x67, 0x66, 0x65, 0x63, 0x5C, 0x5A, 0x59, 0x56,
57 0x55, 0x54, 0x53, 0x52, 0x51, 0x4E, 0x4D, 0x4C, 0x4B, 0x4A,
58 0x49, 0x47, 0x46, 0x45, 0x43, 0x3C, 0x3A, 0x39, 0x36, 0x35,
59 0x34, 0x33, 0x32, 0x31, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29,
60 0x27, 0x26, 0x25, 0x23, 0x1F, 0x1E, 0x1D, 0x1B, 0x18, 0x17,
61 0x10, 0x0F, 0x08, 0x04, 0x02, 0x01
64 static void lpfc_disc_timeout_handler(struct lpfc_vport
*);
65 static void lpfc_disc_flush_list(struct lpfc_vport
*vport
);
66 static void lpfc_unregister_fcfi_cmpl(struct lpfc_hba
*, LPFC_MBOXQ_t
*);
67 static int lpfc_fcf_inuse(struct lpfc_hba
*);
70 lpfc_terminate_rport_io(struct fc_rport
*rport
)
72 struct lpfc_rport_data
*rdata
;
73 struct lpfc_nodelist
* ndlp
;
74 struct lpfc_hba
*phba
;
76 rdata
= rport
->dd_data
;
79 if (!ndlp
|| !NLP_CHK_NODE_ACT(ndlp
)) {
80 if (rport
->roles
& FC_RPORT_ROLE_FCP_TARGET
)
81 printk(KERN_ERR
"Cannot find remote node"
82 " to terminate I/O Data x%x\n",
89 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_RPORT
,
90 "rport terminate: sid:x%x did:x%x flg:x%x",
91 ndlp
->nlp_sid
, ndlp
->nlp_DID
, ndlp
->nlp_flag
);
93 if (ndlp
->nlp_sid
!= NLP_NO_SID
) {
94 lpfc_sli_abort_iocb(ndlp
->vport
,
95 &phba
->sli
.ring
[phba
->sli
.fcp_ring
],
96 ndlp
->nlp_sid
, 0, LPFC_CTX_TGT
);
101 * This function will be called when dev_loss_tmo fire.
104 lpfc_dev_loss_tmo_callbk(struct fc_rport
*rport
)
106 struct lpfc_rport_data
*rdata
;
107 struct lpfc_nodelist
* ndlp
;
108 struct lpfc_vport
*vport
;
109 struct lpfc_hba
*phba
;
110 struct lpfc_work_evt
*evtp
;
114 rdata
= rport
->dd_data
;
116 if (!ndlp
|| !NLP_CHK_NODE_ACT(ndlp
))
122 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_RPORT
,
123 "rport devlosscb: sid:x%x did:x%x flg:x%x",
124 ndlp
->nlp_sid
, ndlp
->nlp_DID
, ndlp
->nlp_flag
);
126 /* Don't defer this if we are in the process of deleting the vport
127 * or unloading the driver. The unload will cleanup the node
128 * appropriately we just need to cleanup the ndlp rport info here.
130 if (vport
->load_flag
& FC_UNLOADING
) {
131 put_node
= rdata
->pnode
!= NULL
;
132 put_rport
= ndlp
->rport
!= NULL
;
138 put_device(&rport
->dev
);
142 if (ndlp
->nlp_state
== NLP_STE_MAPPED_NODE
)
145 evtp
= &ndlp
->dev_loss_evt
;
147 if (!list_empty(&evtp
->evt_listp
))
150 spin_lock_irq(&phba
->hbalock
);
151 /* We need to hold the node by incrementing the reference
152 * count until this queued work is done
154 evtp
->evt_arg1
= lpfc_nlp_get(ndlp
);
155 if (evtp
->evt_arg1
) {
156 evtp
->evt
= LPFC_EVT_DEV_LOSS
;
157 list_add_tail(&evtp
->evt_listp
, &phba
->work_list
);
158 lpfc_worker_wake_up(phba
);
160 spin_unlock_irq(&phba
->hbalock
);
166 * lpfc_dev_loss_tmo_handler - Remote node devloss timeout handler
167 * @ndlp: Pointer to remote node object.
169 * This function is called from the worker thread when devloss timeout timer
170 * expires. For SLI4 host, this routine shall return 1 when at lease one
171 * remote node, including this @ndlp, is still in use of FCF; otherwise, this
172 * routine shall return 0 when there is no remote node is still in use of FCF
173 * when devloss timeout happened to this @ndlp.
176 lpfc_dev_loss_tmo_handler(struct lpfc_nodelist
*ndlp
)
178 struct lpfc_rport_data
*rdata
;
179 struct fc_rport
*rport
;
180 struct lpfc_vport
*vport
;
181 struct lpfc_hba
*phba
;
193 rdata
= rport
->dd_data
;
194 name
= (uint8_t *) &ndlp
->nlp_portname
;
198 if (phba
->sli_rev
== LPFC_SLI_REV4
)
199 fcf_inuse
= lpfc_fcf_inuse(phba
);
201 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_RPORT
,
202 "rport devlosstmo:did:x%x type:x%x id:x%x",
203 ndlp
->nlp_DID
, ndlp
->nlp_type
, rport
->scsi_target_id
);
205 /* Don't defer this if we are in the process of deleting the vport
206 * or unloading the driver. The unload will cleanup the node
207 * appropriately we just need to cleanup the ndlp rport info here.
209 if (vport
->load_flag
& FC_UNLOADING
) {
210 if (ndlp
->nlp_sid
!= NLP_NO_SID
) {
211 /* flush the target */
212 lpfc_sli_abort_iocb(vport
,
213 &phba
->sli
.ring
[phba
->sli
.fcp_ring
],
214 ndlp
->nlp_sid
, 0, LPFC_CTX_TGT
);
216 put_node
= rdata
->pnode
!= NULL
;
217 put_rport
= ndlp
->rport
!= NULL
;
223 put_device(&rport
->dev
);
227 if (ndlp
->nlp_state
== NLP_STE_MAPPED_NODE
) {
228 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
229 "0284 Devloss timeout Ignored on "
230 "WWPN %x:%x:%x:%x:%x:%x:%x:%x "
232 *name
, *(name
+1), *(name
+2), *(name
+3),
233 *(name
+4), *(name
+5), *(name
+6), *(name
+7),
238 if (ndlp
->nlp_type
& NLP_FABRIC
) {
239 /* We will clean up these Nodes in linkup */
240 put_node
= rdata
->pnode
!= NULL
;
241 put_rport
= ndlp
->rport
!= NULL
;
247 put_device(&rport
->dev
);
251 if (ndlp
->nlp_sid
!= NLP_NO_SID
) {
253 /* flush the target */
254 lpfc_sli_abort_iocb(vport
, &phba
->sli
.ring
[phba
->sli
.fcp_ring
],
255 ndlp
->nlp_sid
, 0, LPFC_CTX_TGT
);
259 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
260 "0203 Devloss timeout on "
261 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
262 "NPort x%06x Data: x%x x%x x%x\n",
263 *name
, *(name
+1), *(name
+2), *(name
+3),
264 *(name
+4), *(name
+5), *(name
+6), *(name
+7),
265 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
266 ndlp
->nlp_state
, ndlp
->nlp_rpi
);
268 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
269 "0204 Devloss timeout on "
270 "WWPN %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x "
271 "NPort x%06x Data: x%x x%x x%x\n",
272 *name
, *(name
+1), *(name
+2), *(name
+3),
273 *(name
+4), *(name
+5), *(name
+6), *(name
+7),
274 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
275 ndlp
->nlp_state
, ndlp
->nlp_rpi
);
278 put_node
= rdata
->pnode
!= NULL
;
279 put_rport
= ndlp
->rport
!= NULL
;
285 put_device(&rport
->dev
);
287 if (!(vport
->load_flag
& FC_UNLOADING
) &&
288 !(ndlp
->nlp_flag
& NLP_DELAY_TMO
) &&
289 !(ndlp
->nlp_flag
& NLP_NPR_2B_DISC
) &&
290 (ndlp
->nlp_state
!= NLP_STE_UNMAPPED_NODE
) &&
291 (ndlp
->nlp_state
!= NLP_STE_REG_LOGIN_ISSUE
) &&
292 (ndlp
->nlp_state
!= NLP_STE_PRLI_ISSUE
))
293 lpfc_disc_state_machine(vport
, ndlp
, NULL
, NLP_EVT_DEVICE_RM
);
299 * lpfc_sli4_post_dev_loss_tmo_handler - SLI4 post devloss timeout handler
300 * @phba: Pointer to hba context object.
301 * @fcf_inuse: SLI4 FCF in-use state reported from devloss timeout handler.
302 * @nlp_did: remote node identifer with devloss timeout.
304 * This function is called from the worker thread after invoking devloss
305 * timeout handler and releasing the reference count for the ndlp with
306 * which the devloss timeout was handled for SLI4 host. For the devloss
307 * timeout of the last remote node which had been in use of FCF, when this
308 * routine is invoked, it shall be guaranteed that none of the remote are
309 * in-use of FCF. When devloss timeout to the last remote using the FCF,
310 * if the FIP engine is neither in FCF table scan process nor roundrobin
311 * failover process, the in-use FCF shall be unregistered. If the FIP
312 * engine is in FCF discovery process, the devloss timeout state shall
313 * be set for either the FCF table scan process or roundrobin failover
314 * process to unregister the in-use FCF.
317 lpfc_sli4_post_dev_loss_tmo_handler(struct lpfc_hba
*phba
, int fcf_inuse
,
320 /* If devloss timeout happened to a remote node when FCF had no
321 * longer been in-use, do nothing.
326 if ((phba
->hba_flag
& HBA_FIP_SUPPORT
) && !lpfc_fcf_inuse(phba
)) {
327 spin_lock_irq(&phba
->hbalock
);
328 if (phba
->fcf
.fcf_flag
& FCF_DISCOVERY
) {
329 if (phba
->hba_flag
& HBA_DEVLOSS_TMO
) {
330 spin_unlock_irq(&phba
->hbalock
);
333 phba
->hba_flag
|= HBA_DEVLOSS_TMO
;
334 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
335 "2847 Last remote node (x%x) using "
336 "FCF devloss tmo\n", nlp_did
);
338 if (phba
->fcf
.fcf_flag
& FCF_REDISC_PROG
) {
339 spin_unlock_irq(&phba
->hbalock
);
340 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
341 "2868 Devloss tmo to FCF rediscovery "
345 if (!(phba
->hba_flag
& (FCF_TS_INPROG
| FCF_RR_INPROG
))) {
346 spin_unlock_irq(&phba
->hbalock
);
347 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
348 "2869 Devloss tmo to idle FIP engine, "
349 "unreg in-use FCF and rescan.\n");
350 /* Unregister in-use FCF and rescan */
351 lpfc_unregister_fcf_rescan(phba
);
354 spin_unlock_irq(&phba
->hbalock
);
355 if (phba
->hba_flag
& FCF_TS_INPROG
)
356 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
357 "2870 FCF table scan in progress\n");
358 if (phba
->hba_flag
& FCF_RR_INPROG
)
359 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
360 "2871 FLOGI roundrobin FCF failover "
363 lpfc_unregister_unused_fcf(phba
);
367 * lpfc_alloc_fast_evt - Allocates data structure for posting event
368 * @phba: Pointer to hba context object.
370 * This function is called from the functions which need to post
371 * events from interrupt context. This function allocates data
372 * structure required for posting event. It also keeps track of
373 * number of events pending and prevent event storm when there are
376 struct lpfc_fast_path_event
*
377 lpfc_alloc_fast_evt(struct lpfc_hba
*phba
) {
378 struct lpfc_fast_path_event
*ret
;
380 /* If there are lot of fast event do not exhaust memory due to this */
381 if (atomic_read(&phba
->fast_event_count
) > LPFC_MAX_EVT_COUNT
)
384 ret
= kzalloc(sizeof(struct lpfc_fast_path_event
),
387 atomic_inc(&phba
->fast_event_count
);
388 INIT_LIST_HEAD(&ret
->work_evt
.evt_listp
);
389 ret
->work_evt
.evt
= LPFC_EVT_FASTPATH_MGMT_EVT
;
395 * lpfc_free_fast_evt - Frees event data structure
396 * @phba: Pointer to hba context object.
397 * @evt: Event object which need to be freed.
399 * This function frees the data structure required for posting
403 lpfc_free_fast_evt(struct lpfc_hba
*phba
,
404 struct lpfc_fast_path_event
*evt
) {
406 atomic_dec(&phba
->fast_event_count
);
411 * lpfc_send_fastpath_evt - Posts events generated from fast path
412 * @phba: Pointer to hba context object.
413 * @evtp: Event data structure.
415 * This function is called from worker thread, when the interrupt
416 * context need to post an event. This function posts the event
417 * to fc transport netlink interface.
420 lpfc_send_fastpath_evt(struct lpfc_hba
*phba
,
421 struct lpfc_work_evt
*evtp
)
423 unsigned long evt_category
, evt_sub_category
;
424 struct lpfc_fast_path_event
*fast_evt_data
;
426 uint32_t evt_data_size
;
427 struct Scsi_Host
*shost
;
429 fast_evt_data
= container_of(evtp
, struct lpfc_fast_path_event
,
432 evt_category
= (unsigned long) fast_evt_data
->un
.fabric_evt
.event_type
;
433 evt_sub_category
= (unsigned long) fast_evt_data
->un
.
434 fabric_evt
.subcategory
;
435 shost
= lpfc_shost_from_vport(fast_evt_data
->vport
);
436 if (evt_category
== FC_REG_FABRIC_EVENT
) {
437 if (evt_sub_category
== LPFC_EVENT_FCPRDCHKERR
) {
438 evt_data
= (char *) &fast_evt_data
->un
.read_check_error
;
439 evt_data_size
= sizeof(fast_evt_data
->un
.
441 } else if ((evt_sub_category
== LPFC_EVENT_FABRIC_BUSY
) ||
442 (evt_sub_category
== LPFC_EVENT_PORT_BUSY
)) {
443 evt_data
= (char *) &fast_evt_data
->un
.fabric_evt
;
444 evt_data_size
= sizeof(fast_evt_data
->un
.fabric_evt
);
446 lpfc_free_fast_evt(phba
, fast_evt_data
);
449 } else if (evt_category
== FC_REG_SCSI_EVENT
) {
450 switch (evt_sub_category
) {
451 case LPFC_EVENT_QFULL
:
452 case LPFC_EVENT_DEVBSY
:
453 evt_data
= (char *) &fast_evt_data
->un
.scsi_evt
;
454 evt_data_size
= sizeof(fast_evt_data
->un
.scsi_evt
);
456 case LPFC_EVENT_CHECK_COND
:
457 evt_data
= (char *) &fast_evt_data
->un
.check_cond_evt
;
458 evt_data_size
= sizeof(fast_evt_data
->un
.
461 case LPFC_EVENT_VARQUEDEPTH
:
462 evt_data
= (char *) &fast_evt_data
->un
.queue_depth_evt
;
463 evt_data_size
= sizeof(fast_evt_data
->un
.
467 lpfc_free_fast_evt(phba
, fast_evt_data
);
471 lpfc_free_fast_evt(phba
, fast_evt_data
);
475 fc_host_post_vendor_event(shost
,
476 fc_get_event_number(),
481 lpfc_free_fast_evt(phba
, fast_evt_data
);
486 lpfc_work_list_done(struct lpfc_hba
*phba
)
488 struct lpfc_work_evt
*evtp
= NULL
;
489 struct lpfc_nodelist
*ndlp
;
494 spin_lock_irq(&phba
->hbalock
);
495 while (!list_empty(&phba
->work_list
)) {
496 list_remove_head((&phba
->work_list
), evtp
, typeof(*evtp
),
498 spin_unlock_irq(&phba
->hbalock
);
501 case LPFC_EVT_ELS_RETRY
:
502 ndlp
= (struct lpfc_nodelist
*) (evtp
->evt_arg1
);
503 lpfc_els_retry_delay_handler(ndlp
);
504 free_evt
= 0; /* evt is part of ndlp */
505 /* decrement the node reference count held
506 * for this queued work
510 case LPFC_EVT_DEV_LOSS
:
511 ndlp
= (struct lpfc_nodelist
*)(evtp
->evt_arg1
);
512 fcf_inuse
= lpfc_dev_loss_tmo_handler(ndlp
);
514 /* decrement the node reference count held for
517 nlp_did
= ndlp
->nlp_DID
;
519 if (phba
->sli_rev
== LPFC_SLI_REV4
)
520 lpfc_sli4_post_dev_loss_tmo_handler(phba
,
524 case LPFC_EVT_ONLINE
:
525 if (phba
->link_state
< LPFC_LINK_DOWN
)
526 *(int *) (evtp
->evt_arg1
) = lpfc_online(phba
);
528 *(int *) (evtp
->evt_arg1
) = 0;
529 complete((struct completion
*)(evtp
->evt_arg2
));
531 case LPFC_EVT_OFFLINE_PREP
:
532 if (phba
->link_state
>= LPFC_LINK_DOWN
)
533 lpfc_offline_prep(phba
);
534 *(int *)(evtp
->evt_arg1
) = 0;
535 complete((struct completion
*)(evtp
->evt_arg2
));
537 case LPFC_EVT_OFFLINE
:
539 lpfc_sli_brdrestart(phba
);
540 *(int *)(evtp
->evt_arg1
) =
541 lpfc_sli_brdready(phba
, HS_FFRDY
| HS_MBRDY
);
542 lpfc_unblock_mgmt_io(phba
);
543 complete((struct completion
*)(evtp
->evt_arg2
));
545 case LPFC_EVT_WARM_START
:
547 lpfc_reset_barrier(phba
);
548 lpfc_sli_brdreset(phba
);
549 lpfc_hba_down_post(phba
);
550 *(int *)(evtp
->evt_arg1
) =
551 lpfc_sli_brdready(phba
, HS_MBRDY
);
552 lpfc_unblock_mgmt_io(phba
);
553 complete((struct completion
*)(evtp
->evt_arg2
));
557 *(int *)(evtp
->evt_arg1
)
558 = (phba
->pport
->stopped
)
559 ? 0 : lpfc_sli_brdkill(phba
);
560 lpfc_unblock_mgmt_io(phba
);
561 complete((struct completion
*)(evtp
->evt_arg2
));
563 case LPFC_EVT_FASTPATH_MGMT_EVT
:
564 lpfc_send_fastpath_evt(phba
, evtp
);
567 case LPFC_EVT_RESET_HBA
:
568 if (!(phba
->pport
->load_flag
& FC_UNLOADING
))
569 lpfc_reset_hba(phba
);
574 spin_lock_irq(&phba
->hbalock
);
576 spin_unlock_irq(&phba
->hbalock
);
581 lpfc_work_done(struct lpfc_hba
*phba
)
583 struct lpfc_sli_ring
*pring
;
584 uint32_t ha_copy
, status
, control
, work_port_events
;
585 struct lpfc_vport
**vports
;
586 struct lpfc_vport
*vport
;
589 spin_lock_irq(&phba
->hbalock
);
590 ha_copy
= phba
->work_ha
;
592 spin_unlock_irq(&phba
->hbalock
);
594 /* First, try to post the next mailbox command to SLI4 device */
595 if (phba
->pci_dev_grp
== LPFC_PCI_DEV_OC
)
596 lpfc_sli4_post_async_mbox(phba
);
598 if (ha_copy
& HA_ERATT
)
599 /* Handle the error attention event */
600 lpfc_handle_eratt(phba
);
602 if (ha_copy
& HA_MBATT
)
603 lpfc_sli_handle_mb_event(phba
);
605 if (ha_copy
& HA_LATT
)
606 lpfc_handle_latt(phba
);
608 /* Process SLI4 events */
609 if (phba
->pci_dev_grp
== LPFC_PCI_DEV_OC
) {
610 if (phba
->hba_flag
& HBA_RRQ_ACTIVE
)
611 lpfc_handle_rrq_active(phba
);
612 if (phba
->hba_flag
& FCP_XRI_ABORT_EVENT
)
613 lpfc_sli4_fcp_xri_abort_event_proc(phba
);
614 if (phba
->hba_flag
& ELS_XRI_ABORT_EVENT
)
615 lpfc_sli4_els_xri_abort_event_proc(phba
);
616 if (phba
->hba_flag
& ASYNC_EVENT
)
617 lpfc_sli4_async_event_proc(phba
);
618 if (phba
->hba_flag
& HBA_POST_RECEIVE_BUFFER
) {
619 spin_lock_irq(&phba
->hbalock
);
620 phba
->hba_flag
&= ~HBA_POST_RECEIVE_BUFFER
;
621 spin_unlock_irq(&phba
->hbalock
);
622 lpfc_sli_hbqbuf_add_hbqs(phba
, LPFC_ELS_HBQ
);
624 if (phba
->fcf
.fcf_flag
& FCF_REDISC_EVT
)
625 lpfc_sli4_fcf_redisc_event_proc(phba
);
628 vports
= lpfc_create_vport_work_array(phba
);
630 for (i
= 0; i
<= phba
->max_vports
; i
++) {
632 * We could have no vports in array if unloading, so if
633 * this happens then just use the pport
635 if (vports
[i
] == NULL
&& i
== 0)
641 spin_lock_irq(&vport
->work_port_lock
);
642 work_port_events
= vport
->work_port_events
;
643 vport
->work_port_events
&= ~work_port_events
;
644 spin_unlock_irq(&vport
->work_port_lock
);
645 if (work_port_events
& WORKER_DISC_TMO
)
646 lpfc_disc_timeout_handler(vport
);
647 if (work_port_events
& WORKER_ELS_TMO
)
648 lpfc_els_timeout_handler(vport
);
649 if (work_port_events
& WORKER_HB_TMO
)
650 lpfc_hb_timeout_handler(phba
);
651 if (work_port_events
& WORKER_MBOX_TMO
)
652 lpfc_mbox_timeout_handler(phba
);
653 if (work_port_events
& WORKER_FABRIC_BLOCK_TMO
)
654 lpfc_unblock_fabric_iocbs(phba
);
655 if (work_port_events
& WORKER_FDMI_TMO
)
656 lpfc_fdmi_timeout_handler(vport
);
657 if (work_port_events
& WORKER_RAMP_DOWN_QUEUE
)
658 lpfc_ramp_down_queue_handler(phba
);
659 if (work_port_events
& WORKER_RAMP_UP_QUEUE
)
660 lpfc_ramp_up_queue_handler(phba
);
661 if (work_port_events
& WORKER_DELAYED_DISC_TMO
)
662 lpfc_delayed_disc_timeout_handler(vport
);
664 lpfc_destroy_vport_work_array(phba
, vports
);
666 pring
= &phba
->sli
.ring
[LPFC_ELS_RING
];
667 status
= (ha_copy
& (HA_RXMASK
<< (4*LPFC_ELS_RING
)));
668 status
>>= (4*LPFC_ELS_RING
);
669 if ((status
& HA_RXMASK
) ||
670 (pring
->flag
& LPFC_DEFERRED_RING_EVENT
) ||
671 (phba
->hba_flag
& HBA_SP_QUEUE_EVT
)) {
672 if (pring
->flag
& LPFC_STOP_IOCB_EVENT
) {
673 pring
->flag
|= LPFC_DEFERRED_RING_EVENT
;
674 /* Set the lpfc data pending flag */
675 set_bit(LPFC_DATA_READY
, &phba
->data_flags
);
677 pring
->flag
&= ~LPFC_DEFERRED_RING_EVENT
;
678 lpfc_sli_handle_slow_ring_event(phba
, pring
,
682 if ((phba
->sli_rev
== LPFC_SLI_REV4
) && pring
->txq_cnt
)
683 lpfc_drain_txq(phba
);
685 * Turn on Ring interrupts
687 if (phba
->sli_rev
<= LPFC_SLI_REV3
) {
688 spin_lock_irq(&phba
->hbalock
);
689 control
= readl(phba
->HCregaddr
);
690 if (!(control
& (HC_R0INT_ENA
<< LPFC_ELS_RING
))) {
691 lpfc_debugfs_slow_ring_trc(phba
,
692 "WRK Enable ring: cntl:x%x hacopy:x%x",
693 control
, ha_copy
, 0);
695 control
|= (HC_R0INT_ENA
<< LPFC_ELS_RING
);
696 writel(control
, phba
->HCregaddr
);
697 readl(phba
->HCregaddr
); /* flush */
699 lpfc_debugfs_slow_ring_trc(phba
,
700 "WRK Ring ok: cntl:x%x hacopy:x%x",
701 control
, ha_copy
, 0);
703 spin_unlock_irq(&phba
->hbalock
);
706 lpfc_work_list_done(phba
);
710 lpfc_do_work(void *p
)
712 struct lpfc_hba
*phba
= p
;
715 set_user_nice(current
, -20);
716 phba
->data_flags
= 0;
718 while (!kthread_should_stop()) {
719 /* wait and check worker queue activities */
720 rc
= wait_event_interruptible(phba
->work_waitq
,
721 (test_and_clear_bit(LPFC_DATA_READY
,
723 || kthread_should_stop()));
724 /* Signal wakeup shall terminate the worker thread */
726 lpfc_printf_log(phba
, KERN_ERR
, LOG_ELS
,
727 "0433 Wakeup on signal: rc=x%x\n", rc
);
731 /* Attend pending lpfc data processing */
732 lpfc_work_done(phba
);
734 phba
->worker_thread
= NULL
;
735 lpfc_printf_log(phba
, KERN_INFO
, LOG_ELS
,
736 "0432 Worker thread stopped.\n");
741 * This is only called to handle FC worker events. Since this a rare
742 * occurrence, we allocate a struct lpfc_work_evt structure here instead of
743 * embedding it in the IOCB.
746 lpfc_workq_post_event(struct lpfc_hba
*phba
, void *arg1
, void *arg2
,
749 struct lpfc_work_evt
*evtp
;
753 * All Mailbox completions and LPFC_ELS_RING rcv ring IOCB events will
754 * be queued to worker thread for processing
756 evtp
= kmalloc(sizeof(struct lpfc_work_evt
), GFP_ATOMIC
);
760 evtp
->evt_arg1
= arg1
;
761 evtp
->evt_arg2
= arg2
;
764 spin_lock_irqsave(&phba
->hbalock
, flags
);
765 list_add_tail(&evtp
->evt_listp
, &phba
->work_list
);
766 spin_unlock_irqrestore(&phba
->hbalock
, flags
);
768 lpfc_worker_wake_up(phba
);
774 lpfc_cleanup_rpis(struct lpfc_vport
*vport
, int remove
)
776 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
777 struct lpfc_hba
*phba
= vport
->phba
;
778 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
781 list_for_each_entry_safe(ndlp
, next_ndlp
, &vport
->fc_nodes
, nlp_listp
) {
782 if (!NLP_CHK_NODE_ACT(ndlp
))
784 if (ndlp
->nlp_state
== NLP_STE_UNUSED_NODE
)
786 if ((phba
->sli3_options
& LPFC_SLI3_VPORT_TEARDOWN
) ||
787 ((vport
->port_type
== LPFC_NPIV_PORT
) &&
788 (ndlp
->nlp_DID
== NameServer_DID
)))
789 lpfc_unreg_rpi(vport
, ndlp
);
791 /* Leave Fabric nodes alone on link down */
792 if ((phba
->sli_rev
< LPFC_SLI_REV4
) &&
793 (!remove
&& ndlp
->nlp_type
& NLP_FABRIC
))
795 rc
= lpfc_disc_state_machine(vport
, ndlp
, NULL
,
798 : NLP_EVT_DEVICE_RECOVERY
);
800 if (phba
->sli3_options
& LPFC_SLI3_VPORT_TEARDOWN
) {
801 if (phba
->sli_rev
== LPFC_SLI_REV4
)
802 lpfc_sli4_unreg_all_rpis(vport
);
803 lpfc_mbx_unreg_vpi(vport
);
804 spin_lock_irq(shost
->host_lock
);
805 vport
->fc_flag
|= FC_VPORT_NEEDS_REG_VPI
;
806 spin_unlock_irq(shost
->host_lock
);
811 lpfc_port_link_failure(struct lpfc_vport
*vport
)
813 lpfc_vport_set_state(vport
, FC_VPORT_LINKDOWN
);
815 /* Cleanup any outstanding received buffers */
816 lpfc_cleanup_rcv_buffers(vport
);
818 /* Cleanup any outstanding RSCN activity */
819 lpfc_els_flush_rscn(vport
);
821 /* Cleanup any outstanding ELS commands */
822 lpfc_els_flush_cmd(vport
);
824 lpfc_cleanup_rpis(vport
, 0);
826 /* Turn off discovery timer if its running */
827 lpfc_can_disctmo(vport
);
831 lpfc_linkdown_port(struct lpfc_vport
*vport
)
833 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
835 fc_host_post_event(shost
, fc_get_event_number(), FCH_EVT_LINKDOWN
, 0);
837 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
838 "Link Down: state:x%x rtry:x%x flg:x%x",
839 vport
->port_state
, vport
->fc_ns_retry
, vport
->fc_flag
);
841 lpfc_port_link_failure(vport
);
843 /* Stop delayed Nport discovery */
844 spin_lock_irq(shost
->host_lock
);
845 vport
->fc_flag
&= ~FC_DISC_DELAYED
;
846 spin_unlock_irq(shost
->host_lock
);
847 del_timer_sync(&vport
->delayed_disc_tmo
);
851 lpfc_linkdown(struct lpfc_hba
*phba
)
853 struct lpfc_vport
*vport
= phba
->pport
;
854 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
855 struct lpfc_vport
**vports
;
859 if (phba
->link_state
== LPFC_LINK_DOWN
)
862 /* Block all SCSI stack I/Os */
863 lpfc_scsi_dev_block(phba
);
865 spin_lock_irq(&phba
->hbalock
);
866 phba
->fcf
.fcf_flag
&= ~(FCF_AVAILABLE
| FCF_SCAN_DONE
);
867 spin_unlock_irq(&phba
->hbalock
);
868 if (phba
->link_state
> LPFC_LINK_DOWN
) {
869 phba
->link_state
= LPFC_LINK_DOWN
;
870 spin_lock_irq(shost
->host_lock
);
871 phba
->pport
->fc_flag
&= ~FC_LBIT
;
872 spin_unlock_irq(shost
->host_lock
);
874 vports
= lpfc_create_vport_work_array(phba
);
876 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
877 /* Issue a LINK DOWN event to all nodes */
878 lpfc_linkdown_port(vports
[i
]);
880 lpfc_destroy_vport_work_array(phba
, vports
);
881 /* Clean up any firmware default rpi's */
882 mb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
884 lpfc_unreg_did(phba
, 0xffff, LPFC_UNREG_ALL_DFLT_RPIS
, mb
);
886 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
887 if (lpfc_sli_issue_mbox(phba
, mb
, MBX_NOWAIT
)
888 == MBX_NOT_FINISHED
) {
889 mempool_free(mb
, phba
->mbox_mem_pool
);
893 /* Setup myDID for link up if we are in pt2pt mode */
894 if (phba
->pport
->fc_flag
& FC_PT2PT
) {
895 phba
->pport
->fc_myDID
= 0;
896 mb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
898 lpfc_config_link(phba
, mb
);
899 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
901 if (lpfc_sli_issue_mbox(phba
, mb
, MBX_NOWAIT
)
902 == MBX_NOT_FINISHED
) {
903 mempool_free(mb
, phba
->mbox_mem_pool
);
906 spin_lock_irq(shost
->host_lock
);
907 phba
->pport
->fc_flag
&= ~(FC_PT2PT
| FC_PT2PT_PLOGI
);
908 spin_unlock_irq(shost
->host_lock
);
915 lpfc_linkup_cleanup_nodes(struct lpfc_vport
*vport
)
917 struct lpfc_nodelist
*ndlp
;
919 list_for_each_entry(ndlp
, &vport
->fc_nodes
, nlp_listp
) {
920 if (!NLP_CHK_NODE_ACT(ndlp
))
922 if (ndlp
->nlp_state
== NLP_STE_UNUSED_NODE
)
924 if (ndlp
->nlp_type
& NLP_FABRIC
) {
925 /* On Linkup its safe to clean up the ndlp
926 * from Fabric connections.
928 if (ndlp
->nlp_DID
!= Fabric_DID
)
929 lpfc_unreg_rpi(vport
, ndlp
);
930 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_NPR_NODE
);
931 } else if (!(ndlp
->nlp_flag
& NLP_NPR_ADISC
)) {
932 /* Fail outstanding IO now since device is
935 lpfc_unreg_rpi(vport
, ndlp
);
941 lpfc_linkup_port(struct lpfc_vport
*vport
)
943 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
944 struct lpfc_hba
*phba
= vport
->phba
;
946 if ((vport
->load_flag
& FC_UNLOADING
) != 0)
949 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
950 "Link Up: top:x%x speed:x%x flg:x%x",
951 phba
->fc_topology
, phba
->fc_linkspeed
, phba
->link_flag
);
953 /* If NPIV is not enabled, only bring the physical port up */
954 if (!(phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
) &&
955 (vport
!= phba
->pport
))
958 fc_host_post_event(shost
, fc_get_event_number(), FCH_EVT_LINKUP
, 0);
960 spin_lock_irq(shost
->host_lock
);
961 vport
->fc_flag
&= ~(FC_PT2PT
| FC_PT2PT_PLOGI
| FC_ABORT_DISCOVERY
|
962 FC_RSCN_MODE
| FC_NLP_MORE
| FC_RSCN_DISCOVERY
);
963 vport
->fc_flag
|= FC_NDISC_ACTIVE
;
964 vport
->fc_ns_retry
= 0;
965 spin_unlock_irq(shost
->host_lock
);
967 if (vport
->fc_flag
& FC_LBIT
)
968 lpfc_linkup_cleanup_nodes(vport
);
973 lpfc_linkup(struct lpfc_hba
*phba
)
975 struct lpfc_vport
**vports
;
978 lpfc_cleanup_wt_rrqs(phba
);
979 phba
->link_state
= LPFC_LINK_UP
;
981 /* Unblock fabric iocbs if they are blocked */
982 clear_bit(FABRIC_COMANDS_BLOCKED
, &phba
->bit_flags
);
983 del_timer_sync(&phba
->fabric_block_timer
);
985 vports
= lpfc_create_vport_work_array(phba
);
987 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++)
988 lpfc_linkup_port(vports
[i
]);
989 lpfc_destroy_vport_work_array(phba
, vports
);
990 if ((phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
) &&
991 (phba
->sli_rev
< LPFC_SLI_REV4
))
992 lpfc_issue_clear_la(phba
, phba
->pport
);
998 * This routine handles processing a CLEAR_LA mailbox
999 * command upon completion. It is setup in the LPFC_MBOXQ
1000 * as the completion routine when the command is
1001 * handed off to the SLI layer.
1004 lpfc_mbx_cmpl_clear_la(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
1006 struct lpfc_vport
*vport
= pmb
->vport
;
1007 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
1008 struct lpfc_sli
*psli
= &phba
->sli
;
1009 MAILBOX_t
*mb
= &pmb
->u
.mb
;
1012 /* Since we don't do discovery right now, turn these off here */
1013 psli
->ring
[psli
->extra_ring
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
1014 psli
->ring
[psli
->fcp_ring
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
1015 psli
->ring
[psli
->next_ring
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
1017 /* Check for error */
1018 if ((mb
->mbxStatus
) && (mb
->mbxStatus
!= 0x1601)) {
1019 /* CLEAR_LA mbox error <mbxStatus> state <hba_state> */
1020 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
1021 "0320 CLEAR_LA mbxStatus error x%x hba "
1023 mb
->mbxStatus
, vport
->port_state
);
1024 phba
->link_state
= LPFC_HBA_ERROR
;
1028 if (vport
->port_type
== LPFC_PHYSICAL_PORT
)
1029 phba
->link_state
= LPFC_HBA_READY
;
1031 spin_lock_irq(&phba
->hbalock
);
1032 psli
->sli_flag
|= LPFC_PROCESS_LA
;
1033 control
= readl(phba
->HCregaddr
);
1034 control
|= HC_LAINT_ENA
;
1035 writel(control
, phba
->HCregaddr
);
1036 readl(phba
->HCregaddr
); /* flush */
1037 spin_unlock_irq(&phba
->hbalock
);
1038 mempool_free(pmb
, phba
->mbox_mem_pool
);
1042 /* Device Discovery completes */
1043 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
1044 "0225 Device Discovery completes\n");
1045 mempool_free(pmb
, phba
->mbox_mem_pool
);
1047 spin_lock_irq(shost
->host_lock
);
1048 vport
->fc_flag
&= ~FC_ABORT_DISCOVERY
;
1049 spin_unlock_irq(shost
->host_lock
);
1051 lpfc_can_disctmo(vport
);
1053 /* turn on Link Attention interrupts */
1055 spin_lock_irq(&phba
->hbalock
);
1056 psli
->sli_flag
|= LPFC_PROCESS_LA
;
1057 control
= readl(phba
->HCregaddr
);
1058 control
|= HC_LAINT_ENA
;
1059 writel(control
, phba
->HCregaddr
);
1060 readl(phba
->HCregaddr
); /* flush */
1061 spin_unlock_irq(&phba
->hbalock
);
1068 lpfc_mbx_cmpl_local_config_link(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
1070 struct lpfc_vport
*vport
= pmb
->vport
;
1072 if (pmb
->u
.mb
.mbxStatus
)
1075 mempool_free(pmb
, phba
->mbox_mem_pool
);
1077 /* don't perform discovery for SLI4 loopback diagnostic test */
1078 if ((phba
->sli_rev
== LPFC_SLI_REV4
) &&
1079 !(phba
->hba_flag
& HBA_FCOE_MODE
) &&
1080 (phba
->link_flag
& LS_LOOPBACK_MODE
))
1083 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
&&
1084 vport
->fc_flag
& FC_PUBLIC_LOOP
&&
1085 !(vport
->fc_flag
& FC_LBIT
)) {
1086 /* Need to wait for FAN - use discovery timer
1087 * for timeout. port_state is identically
1088 * LPFC_LOCAL_CFG_LINK while waiting for FAN
1090 lpfc_set_disctmo(vport
);
1094 /* Start discovery by sending a FLOGI. port_state is identically
1095 * LPFC_FLOGI while waiting for FLOGI cmpl
1097 if (vport
->port_state
!= LPFC_FLOGI
)
1098 lpfc_initial_flogi(vport
);
1102 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
1103 "0306 CONFIG_LINK mbxStatus error x%x "
1105 pmb
->u
.mb
.mbxStatus
, vport
->port_state
);
1106 mempool_free(pmb
, phba
->mbox_mem_pool
);
1108 lpfc_linkdown(phba
);
1110 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
1111 "0200 CONFIG_LINK bad hba state x%x\n",
1114 lpfc_issue_clear_la(phba
, vport
);
1119 * lpfc_sli4_clear_fcf_rr_bmask
1120 * @phba pointer to the struct lpfc_hba for this port.
1121 * This fucnction resets the round robin bit mask and clears the
1122 * fcf priority list. The list deletions are done while holding the
1123 * hbalock. The ON_LIST flag and the FLOGI_FAILED flags are cleared
1124 * from the lpfc_fcf_pri record.
1127 lpfc_sli4_clear_fcf_rr_bmask(struct lpfc_hba
*phba
)
1129 struct lpfc_fcf_pri
*fcf_pri
;
1130 struct lpfc_fcf_pri
*next_fcf_pri
;
1131 memset(phba
->fcf
.fcf_rr_bmask
, 0, sizeof(*phba
->fcf
.fcf_rr_bmask
));
1132 spin_lock_irq(&phba
->hbalock
);
1133 list_for_each_entry_safe(fcf_pri
, next_fcf_pri
,
1134 &phba
->fcf
.fcf_pri_list
, list
) {
1135 list_del_init(&fcf_pri
->list
);
1136 fcf_pri
->fcf_rec
.flag
= 0;
1138 spin_unlock_irq(&phba
->hbalock
);
1141 lpfc_mbx_cmpl_reg_fcfi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
1143 struct lpfc_vport
*vport
= mboxq
->vport
;
1145 if (mboxq
->u
.mb
.mbxStatus
) {
1146 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
1147 "2017 REG_FCFI mbxStatus error x%x "
1149 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
1153 /* Start FCoE discovery by sending a FLOGI. */
1154 phba
->fcf
.fcfi
= bf_get(lpfc_reg_fcfi_fcfi
, &mboxq
->u
.mqe
.un
.reg_fcfi
);
1155 /* Set the FCFI registered flag */
1156 spin_lock_irq(&phba
->hbalock
);
1157 phba
->fcf
.fcf_flag
|= FCF_REGISTERED
;
1158 spin_unlock_irq(&phba
->hbalock
);
1160 /* If there is a pending FCoE event, restart FCF table scan. */
1161 if ((!(phba
->hba_flag
& FCF_RR_INPROG
)) &&
1162 lpfc_check_pending_fcoe_event(phba
, LPFC_UNREG_FCF
))
1165 /* Mark successful completion of FCF table scan */
1166 spin_lock_irq(&phba
->hbalock
);
1167 phba
->fcf
.fcf_flag
|= (FCF_SCAN_DONE
| FCF_IN_USE
);
1168 phba
->hba_flag
&= ~FCF_TS_INPROG
;
1169 if (vport
->port_state
!= LPFC_FLOGI
) {
1170 phba
->hba_flag
|= FCF_RR_INPROG
;
1171 spin_unlock_irq(&phba
->hbalock
);
1172 lpfc_issue_init_vfi(vport
);
1175 spin_unlock_irq(&phba
->hbalock
);
1179 spin_lock_irq(&phba
->hbalock
);
1180 phba
->hba_flag
&= ~FCF_RR_INPROG
;
1181 spin_unlock_irq(&phba
->hbalock
);
1183 mempool_free(mboxq
, phba
->mbox_mem_pool
);
1187 * lpfc_fab_name_match - Check if the fcf fabric name match.
1188 * @fab_name: pointer to fabric name.
1189 * @new_fcf_record: pointer to fcf record.
1191 * This routine compare the fcf record's fabric name with provided
1192 * fabric name. If the fabric name are identical this function
1193 * returns 1 else return 0.
1196 lpfc_fab_name_match(uint8_t *fab_name
, struct fcf_record
*new_fcf_record
)
1198 if (fab_name
[0] != bf_get(lpfc_fcf_record_fab_name_0
, new_fcf_record
))
1200 if (fab_name
[1] != bf_get(lpfc_fcf_record_fab_name_1
, new_fcf_record
))
1202 if (fab_name
[2] != bf_get(lpfc_fcf_record_fab_name_2
, new_fcf_record
))
1204 if (fab_name
[3] != bf_get(lpfc_fcf_record_fab_name_3
, new_fcf_record
))
1206 if (fab_name
[4] != bf_get(lpfc_fcf_record_fab_name_4
, new_fcf_record
))
1208 if (fab_name
[5] != bf_get(lpfc_fcf_record_fab_name_5
, new_fcf_record
))
1210 if (fab_name
[6] != bf_get(lpfc_fcf_record_fab_name_6
, new_fcf_record
))
1212 if (fab_name
[7] != bf_get(lpfc_fcf_record_fab_name_7
, new_fcf_record
))
1218 * lpfc_sw_name_match - Check if the fcf switch name match.
1219 * @fab_name: pointer to fabric name.
1220 * @new_fcf_record: pointer to fcf record.
1222 * This routine compare the fcf record's switch name with provided
1223 * switch name. If the switch name are identical this function
1224 * returns 1 else return 0.
1227 lpfc_sw_name_match(uint8_t *sw_name
, struct fcf_record
*new_fcf_record
)
1229 if (sw_name
[0] != bf_get(lpfc_fcf_record_switch_name_0
, new_fcf_record
))
1231 if (sw_name
[1] != bf_get(lpfc_fcf_record_switch_name_1
, new_fcf_record
))
1233 if (sw_name
[2] != bf_get(lpfc_fcf_record_switch_name_2
, new_fcf_record
))
1235 if (sw_name
[3] != bf_get(lpfc_fcf_record_switch_name_3
, new_fcf_record
))
1237 if (sw_name
[4] != bf_get(lpfc_fcf_record_switch_name_4
, new_fcf_record
))
1239 if (sw_name
[5] != bf_get(lpfc_fcf_record_switch_name_5
, new_fcf_record
))
1241 if (sw_name
[6] != bf_get(lpfc_fcf_record_switch_name_6
, new_fcf_record
))
1243 if (sw_name
[7] != bf_get(lpfc_fcf_record_switch_name_7
, new_fcf_record
))
1249 * lpfc_mac_addr_match - Check if the fcf mac address match.
1250 * @mac_addr: pointer to mac address.
1251 * @new_fcf_record: pointer to fcf record.
1253 * This routine compare the fcf record's mac address with HBA's
1254 * FCF mac address. If the mac addresses are identical this function
1255 * returns 1 else return 0.
1258 lpfc_mac_addr_match(uint8_t *mac_addr
, struct fcf_record
*new_fcf_record
)
1260 if (mac_addr
[0] != bf_get(lpfc_fcf_record_mac_0
, new_fcf_record
))
1262 if (mac_addr
[1] != bf_get(lpfc_fcf_record_mac_1
, new_fcf_record
))
1264 if (mac_addr
[2] != bf_get(lpfc_fcf_record_mac_2
, new_fcf_record
))
1266 if (mac_addr
[3] != bf_get(lpfc_fcf_record_mac_3
, new_fcf_record
))
1268 if (mac_addr
[4] != bf_get(lpfc_fcf_record_mac_4
, new_fcf_record
))
1270 if (mac_addr
[5] != bf_get(lpfc_fcf_record_mac_5
, new_fcf_record
))
1276 lpfc_vlan_id_match(uint16_t curr_vlan_id
, uint16_t new_vlan_id
)
1278 return (curr_vlan_id
== new_vlan_id
);
1282 * lpfc_update_fcf_record - Update driver fcf record
1283 * __lpfc_update_fcf_record_pri - update the lpfc_fcf_pri record.
1284 * @phba: pointer to lpfc hba data structure.
1285 * @fcf_index: Index for the lpfc_fcf_record.
1286 * @new_fcf_record: pointer to hba fcf record.
1288 * This routine updates the driver FCF priority record from the new HBA FCF
1289 * record. This routine is called with the host lock held.
1292 __lpfc_update_fcf_record_pri(struct lpfc_hba
*phba
, uint16_t fcf_index
,
1293 struct fcf_record
*new_fcf_record
1296 struct lpfc_fcf_pri
*fcf_pri
;
1298 fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
1299 fcf_pri
->fcf_rec
.fcf_index
= fcf_index
;
1300 /* FCF record priority */
1301 fcf_pri
->fcf_rec
.priority
= new_fcf_record
->fip_priority
;
1306 * lpfc_copy_fcf_record - Copy fcf information to lpfc_hba.
1307 * @fcf: pointer to driver fcf record.
1308 * @new_fcf_record: pointer to fcf record.
1310 * This routine copies the FCF information from the FCF
1311 * record to lpfc_hba data structure.
1314 lpfc_copy_fcf_record(struct lpfc_fcf_rec
*fcf_rec
,
1315 struct fcf_record
*new_fcf_record
)
1318 fcf_rec
->fabric_name
[0] =
1319 bf_get(lpfc_fcf_record_fab_name_0
, new_fcf_record
);
1320 fcf_rec
->fabric_name
[1] =
1321 bf_get(lpfc_fcf_record_fab_name_1
, new_fcf_record
);
1322 fcf_rec
->fabric_name
[2] =
1323 bf_get(lpfc_fcf_record_fab_name_2
, new_fcf_record
);
1324 fcf_rec
->fabric_name
[3] =
1325 bf_get(lpfc_fcf_record_fab_name_3
, new_fcf_record
);
1326 fcf_rec
->fabric_name
[4] =
1327 bf_get(lpfc_fcf_record_fab_name_4
, new_fcf_record
);
1328 fcf_rec
->fabric_name
[5] =
1329 bf_get(lpfc_fcf_record_fab_name_5
, new_fcf_record
);
1330 fcf_rec
->fabric_name
[6] =
1331 bf_get(lpfc_fcf_record_fab_name_6
, new_fcf_record
);
1332 fcf_rec
->fabric_name
[7] =
1333 bf_get(lpfc_fcf_record_fab_name_7
, new_fcf_record
);
1335 fcf_rec
->mac_addr
[0] = bf_get(lpfc_fcf_record_mac_0
, new_fcf_record
);
1336 fcf_rec
->mac_addr
[1] = bf_get(lpfc_fcf_record_mac_1
, new_fcf_record
);
1337 fcf_rec
->mac_addr
[2] = bf_get(lpfc_fcf_record_mac_2
, new_fcf_record
);
1338 fcf_rec
->mac_addr
[3] = bf_get(lpfc_fcf_record_mac_3
, new_fcf_record
);
1339 fcf_rec
->mac_addr
[4] = bf_get(lpfc_fcf_record_mac_4
, new_fcf_record
);
1340 fcf_rec
->mac_addr
[5] = bf_get(lpfc_fcf_record_mac_5
, new_fcf_record
);
1341 /* FCF record index */
1342 fcf_rec
->fcf_indx
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
1343 /* FCF record priority */
1344 fcf_rec
->priority
= new_fcf_record
->fip_priority
;
1346 fcf_rec
->switch_name
[0] =
1347 bf_get(lpfc_fcf_record_switch_name_0
, new_fcf_record
);
1348 fcf_rec
->switch_name
[1] =
1349 bf_get(lpfc_fcf_record_switch_name_1
, new_fcf_record
);
1350 fcf_rec
->switch_name
[2] =
1351 bf_get(lpfc_fcf_record_switch_name_2
, new_fcf_record
);
1352 fcf_rec
->switch_name
[3] =
1353 bf_get(lpfc_fcf_record_switch_name_3
, new_fcf_record
);
1354 fcf_rec
->switch_name
[4] =
1355 bf_get(lpfc_fcf_record_switch_name_4
, new_fcf_record
);
1356 fcf_rec
->switch_name
[5] =
1357 bf_get(lpfc_fcf_record_switch_name_5
, new_fcf_record
);
1358 fcf_rec
->switch_name
[6] =
1359 bf_get(lpfc_fcf_record_switch_name_6
, new_fcf_record
);
1360 fcf_rec
->switch_name
[7] =
1361 bf_get(lpfc_fcf_record_switch_name_7
, new_fcf_record
);
1365 * lpfc_update_fcf_record - Update driver fcf record
1366 * @phba: pointer to lpfc hba data structure.
1367 * @fcf_rec: pointer to driver fcf record.
1368 * @new_fcf_record: pointer to hba fcf record.
1369 * @addr_mode: address mode to be set to the driver fcf record.
1370 * @vlan_id: vlan tag to be set to the driver fcf record.
1371 * @flag: flag bits to be set to the driver fcf record.
1373 * This routine updates the driver FCF record from the new HBA FCF record
1374 * together with the address mode, vlan_id, and other informations. This
1375 * routine is called with the host lock held.
1378 __lpfc_update_fcf_record(struct lpfc_hba
*phba
, struct lpfc_fcf_rec
*fcf_rec
,
1379 struct fcf_record
*new_fcf_record
, uint32_t addr_mode
,
1380 uint16_t vlan_id
, uint32_t flag
)
1382 /* Copy the fields from the HBA's FCF record */
1383 lpfc_copy_fcf_record(fcf_rec
, new_fcf_record
);
1384 /* Update other fields of driver FCF record */
1385 fcf_rec
->addr_mode
= addr_mode
;
1386 fcf_rec
->vlan_id
= vlan_id
;
1387 fcf_rec
->flag
|= (flag
| RECORD_VALID
);
1388 __lpfc_update_fcf_record_pri(phba
,
1389 bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
),
1394 * lpfc_register_fcf - Register the FCF with hba.
1395 * @phba: pointer to lpfc hba data structure.
1397 * This routine issues a register fcfi mailbox command to register
1401 lpfc_register_fcf(struct lpfc_hba
*phba
)
1403 LPFC_MBOXQ_t
*fcf_mbxq
;
1406 spin_lock_irq(&phba
->hbalock
);
1407 /* If the FCF is not available do nothing. */
1408 if (!(phba
->fcf
.fcf_flag
& FCF_AVAILABLE
)) {
1409 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1410 spin_unlock_irq(&phba
->hbalock
);
1414 /* The FCF is already registered, start discovery */
1415 if (phba
->fcf
.fcf_flag
& FCF_REGISTERED
) {
1416 phba
->fcf
.fcf_flag
|= (FCF_SCAN_DONE
| FCF_IN_USE
);
1417 phba
->hba_flag
&= ~FCF_TS_INPROG
;
1418 if (phba
->pport
->port_state
!= LPFC_FLOGI
) {
1419 phba
->hba_flag
|= FCF_RR_INPROG
;
1420 spin_unlock_irq(&phba
->hbalock
);
1421 lpfc_initial_flogi(phba
->pport
);
1424 spin_unlock_irq(&phba
->hbalock
);
1427 spin_unlock_irq(&phba
->hbalock
);
1429 fcf_mbxq
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
1431 spin_lock_irq(&phba
->hbalock
);
1432 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1433 spin_unlock_irq(&phba
->hbalock
);
1437 lpfc_reg_fcfi(phba
, fcf_mbxq
);
1438 fcf_mbxq
->vport
= phba
->pport
;
1439 fcf_mbxq
->mbox_cmpl
= lpfc_mbx_cmpl_reg_fcfi
;
1440 rc
= lpfc_sli_issue_mbox(phba
, fcf_mbxq
, MBX_NOWAIT
);
1441 if (rc
== MBX_NOT_FINISHED
) {
1442 spin_lock_irq(&phba
->hbalock
);
1443 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1444 spin_unlock_irq(&phba
->hbalock
);
1445 mempool_free(fcf_mbxq
, phba
->mbox_mem_pool
);
1452 * lpfc_match_fcf_conn_list - Check if the FCF record can be used for discovery.
1453 * @phba: pointer to lpfc hba data structure.
1454 * @new_fcf_record: pointer to fcf record.
1455 * @boot_flag: Indicates if this record used by boot bios.
1456 * @addr_mode: The address mode to be used by this FCF
1457 * @vlan_id: The vlan id to be used as vlan tagging by this FCF.
1459 * This routine compare the fcf record with connect list obtained from the
1460 * config region to decide if this FCF can be used for SAN discovery. It returns
1461 * 1 if this record can be used for SAN discovery else return zero. If this FCF
1462 * record can be used for SAN discovery, the boot_flag will indicate if this FCF
1463 * is used by boot bios and addr_mode will indicate the addressing mode to be
1464 * used for this FCF when the function returns.
1465 * If the FCF record need to be used with a particular vlan id, the vlan is
1466 * set in the vlan_id on return of the function. If not VLAN tagging need to
1467 * be used with the FCF vlan_id will be set to LPFC_FCOE_NULL_VID;
1470 lpfc_match_fcf_conn_list(struct lpfc_hba
*phba
,
1471 struct fcf_record
*new_fcf_record
,
1472 uint32_t *boot_flag
, uint32_t *addr_mode
,
1475 struct lpfc_fcf_conn_entry
*conn_entry
;
1476 int i
, j
, fcf_vlan_id
= 0;
1478 /* Find the lowest VLAN id in the FCF record */
1479 for (i
= 0; i
< 512; i
++) {
1480 if (new_fcf_record
->vlan_bitmap
[i
]) {
1481 fcf_vlan_id
= i
* 8;
1483 while (!((new_fcf_record
->vlan_bitmap
[i
] >> j
) & 1)) {
1491 /* If FCF not available return 0 */
1492 if (!bf_get(lpfc_fcf_record_fcf_avail
, new_fcf_record
) ||
1493 !bf_get(lpfc_fcf_record_fcf_valid
, new_fcf_record
))
1496 if (!(phba
->hba_flag
& HBA_FIP_SUPPORT
)) {
1498 *addr_mode
= bf_get(lpfc_fcf_record_mac_addr_prov
,
1500 if (phba
->valid_vlan
)
1501 *vlan_id
= phba
->vlan_id
;
1503 *vlan_id
= LPFC_FCOE_NULL_VID
;
1508 * If there are no FCF connection table entry, driver connect to all
1511 if (list_empty(&phba
->fcf_conn_rec_list
)) {
1513 *addr_mode
= bf_get(lpfc_fcf_record_mac_addr_prov
,
1517 * When there are no FCF connect entries, use driver's default
1518 * addressing mode - FPMA.
1520 if (*addr_mode
& LPFC_FCF_FPMA
)
1521 *addr_mode
= LPFC_FCF_FPMA
;
1523 /* If FCF record report a vlan id use that vlan id */
1525 *vlan_id
= fcf_vlan_id
;
1527 *vlan_id
= LPFC_FCOE_NULL_VID
;
1531 list_for_each_entry(conn_entry
,
1532 &phba
->fcf_conn_rec_list
, list
) {
1533 if (!(conn_entry
->conn_rec
.flags
& FCFCNCT_VALID
))
1536 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_FBNM_VALID
) &&
1537 !lpfc_fab_name_match(conn_entry
->conn_rec
.fabric_name
,
1540 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_SWNM_VALID
) &&
1541 !lpfc_sw_name_match(conn_entry
->conn_rec
.switch_name
,
1544 if (conn_entry
->conn_rec
.flags
& FCFCNCT_VLAN_VALID
) {
1546 * If the vlan bit map does not have the bit set for the
1547 * vlan id to be used, then it is not a match.
1549 if (!(new_fcf_record
->vlan_bitmap
1550 [conn_entry
->conn_rec
.vlan_tag
/ 8] &
1551 (1 << (conn_entry
->conn_rec
.vlan_tag
% 8))))
1556 * If connection record does not support any addressing mode,
1557 * skip the FCF record.
1559 if (!(bf_get(lpfc_fcf_record_mac_addr_prov
, new_fcf_record
)
1560 & (LPFC_FCF_FPMA
| LPFC_FCF_SPMA
)))
1564 * Check if the connection record specifies a required
1567 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1568 !(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
)) {
1571 * If SPMA required but FCF not support this continue.
1573 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1574 !(bf_get(lpfc_fcf_record_mac_addr_prov
,
1575 new_fcf_record
) & LPFC_FCF_SPMA
))
1579 * If FPMA required but FCF not support this continue.
1581 if (!(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1582 !(bf_get(lpfc_fcf_record_mac_addr_prov
,
1583 new_fcf_record
) & LPFC_FCF_FPMA
))
1588 * This fcf record matches filtering criteria.
1590 if (conn_entry
->conn_rec
.flags
& FCFCNCT_BOOT
)
1596 * If user did not specify any addressing mode, or if the
1597 * preferred addressing mode specified by user is not supported
1598 * by FCF, allow fabric to pick the addressing mode.
1600 *addr_mode
= bf_get(lpfc_fcf_record_mac_addr_prov
,
1603 * If the user specified a required address mode, assign that
1606 if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1607 (!(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
)))
1608 *addr_mode
= (conn_entry
->conn_rec
.flags
&
1610 LPFC_FCF_SPMA
: LPFC_FCF_FPMA
;
1612 * If the user specified a preferred address mode, use the
1613 * addr mode only if FCF support the addr_mode.
1615 else if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1616 (conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
) &&
1617 (conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1618 (*addr_mode
& LPFC_FCF_SPMA
))
1619 *addr_mode
= LPFC_FCF_SPMA
;
1620 else if ((conn_entry
->conn_rec
.flags
& FCFCNCT_AM_VALID
) &&
1621 (conn_entry
->conn_rec
.flags
& FCFCNCT_AM_PREFERRED
) &&
1622 !(conn_entry
->conn_rec
.flags
& FCFCNCT_AM_SPMA
) &&
1623 (*addr_mode
& LPFC_FCF_FPMA
))
1624 *addr_mode
= LPFC_FCF_FPMA
;
1626 /* If matching connect list has a vlan id, use it */
1627 if (conn_entry
->conn_rec
.flags
& FCFCNCT_VLAN_VALID
)
1628 *vlan_id
= conn_entry
->conn_rec
.vlan_tag
;
1630 * If no vlan id is specified in connect list, use the vlan id
1633 else if (fcf_vlan_id
)
1634 *vlan_id
= fcf_vlan_id
;
1636 *vlan_id
= LPFC_FCOE_NULL_VID
;
1645 * lpfc_check_pending_fcoe_event - Check if there is pending fcoe event.
1646 * @phba: pointer to lpfc hba data structure.
1647 * @unreg_fcf: Unregister FCF if FCF table need to be re-scaned.
1649 * This function check if there is any fcoe event pending while driver
1650 * scan FCF entries. If there is any pending event, it will restart the
1651 * FCF saning and return 1 else return 0.
1654 lpfc_check_pending_fcoe_event(struct lpfc_hba
*phba
, uint8_t unreg_fcf
)
1657 * If the Link is up and no FCoE events while in the
1658 * FCF discovery, no need to restart FCF discovery.
1660 if ((phba
->link_state
>= LPFC_LINK_UP
) &&
1661 (phba
->fcoe_eventtag
== phba
->fcoe_eventtag_at_fcf_scan
))
1664 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1665 "2768 Pending link or FCF event during current "
1666 "handling of the previous event: link_state:x%x, "
1667 "evt_tag_at_scan:x%x, evt_tag_current:x%x\n",
1668 phba
->link_state
, phba
->fcoe_eventtag_at_fcf_scan
,
1669 phba
->fcoe_eventtag
);
1671 spin_lock_irq(&phba
->hbalock
);
1672 phba
->fcf
.fcf_flag
&= ~FCF_AVAILABLE
;
1673 spin_unlock_irq(&phba
->hbalock
);
1675 if (phba
->link_state
>= LPFC_LINK_UP
) {
1676 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
1677 "2780 Restart FCF table scan due to "
1678 "pending FCF event:evt_tag_at_scan:x%x, "
1679 "evt_tag_current:x%x\n",
1680 phba
->fcoe_eventtag_at_fcf_scan
,
1681 phba
->fcoe_eventtag
);
1682 lpfc_sli4_fcf_scan_read_fcf_rec(phba
, LPFC_FCOE_FCF_GET_FIRST
);
1685 * Do not continue FCF discovery and clear FCF_TS_INPROG
1688 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
1689 "2833 Stop FCF discovery process due to link "
1690 "state change (x%x)\n", phba
->link_state
);
1691 spin_lock_irq(&phba
->hbalock
);
1692 phba
->hba_flag
&= ~(FCF_TS_INPROG
| FCF_RR_INPROG
);
1693 phba
->fcf
.fcf_flag
&= ~(FCF_REDISC_FOV
| FCF_DISCOVERY
);
1694 spin_unlock_irq(&phba
->hbalock
);
1697 /* Unregister the currently registered FCF if required */
1699 spin_lock_irq(&phba
->hbalock
);
1700 phba
->fcf
.fcf_flag
&= ~FCF_REGISTERED
;
1701 spin_unlock_irq(&phba
->hbalock
);
1702 lpfc_sli4_unregister_fcf(phba
);
1708 * lpfc_sli4_new_fcf_random_select - Randomly select an eligible new fcf record
1709 * @phba: pointer to lpfc hba data structure.
1710 * @fcf_cnt: number of eligible fcf record seen so far.
1712 * This function makes an running random selection decision on FCF record to
1713 * use through a sequence of @fcf_cnt eligible FCF records with equal
1714 * probability. To perform integer manunipulation of random numbers with
1715 * size unit32_t, the lower 16 bits of the 32-bit random number returned
1716 * from random32() are taken as the random random number generated.
1718 * Returns true when outcome is for the newly read FCF record should be
1719 * chosen; otherwise, return false when outcome is for keeping the previously
1720 * chosen FCF record.
1723 lpfc_sli4_new_fcf_random_select(struct lpfc_hba
*phba
, uint32_t fcf_cnt
)
1727 /* Get 16-bit uniform random number */
1728 rand_num
= (0xFFFF & random32());
1730 /* Decision with probability 1/fcf_cnt */
1731 if ((fcf_cnt
* rand_num
) < 0xFFFF)
1738 * lpfc_sli4_fcf_rec_mbox_parse - Parse read_fcf mbox command.
1739 * @phba: pointer to lpfc hba data structure.
1740 * @mboxq: pointer to mailbox object.
1741 * @next_fcf_index: pointer to holder of next fcf index.
1743 * This routine parses the non-embedded fcf mailbox command by performing the
1744 * necessarily error checking, non-embedded read FCF record mailbox command
1745 * SGE parsing, and endianness swapping.
1747 * Returns the pointer to the new FCF record in the non-embedded mailbox
1748 * command DMA memory if successfully, other NULL.
1750 static struct fcf_record
*
1751 lpfc_sli4_fcf_rec_mbox_parse(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
,
1752 uint16_t *next_fcf_index
)
1755 dma_addr_t phys_addr
;
1756 struct lpfc_mbx_sge sge
;
1757 struct lpfc_mbx_read_fcf_tbl
*read_fcf
;
1758 uint32_t shdr_status
, shdr_add_status
;
1759 union lpfc_sli4_cfg_shdr
*shdr
;
1760 struct fcf_record
*new_fcf_record
;
1762 /* Get the first SGE entry from the non-embedded DMA memory. This
1763 * routine only uses a single SGE.
1765 lpfc_sli4_mbx_sge_get(mboxq
, 0, &sge
);
1766 phys_addr
= getPaddr(sge
.pa_hi
, sge
.pa_lo
);
1767 if (unlikely(!mboxq
->sge_array
)) {
1768 lpfc_printf_log(phba
, KERN_ERR
, LOG_MBOX
,
1769 "2524 Failed to get the non-embedded SGE "
1770 "virtual address\n");
1773 virt_addr
= mboxq
->sge_array
->addr
[0];
1775 shdr
= (union lpfc_sli4_cfg_shdr
*)virt_addr
;
1776 shdr_status
= bf_get(lpfc_mbox_hdr_status
, &shdr
->response
);
1777 shdr_add_status
= bf_get(lpfc_mbox_hdr_add_status
, &shdr
->response
);
1778 if (shdr_status
|| shdr_add_status
) {
1779 if (shdr_status
== STATUS_FCF_TABLE_EMPTY
)
1780 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
1781 "2726 READ_FCF_RECORD Indicates empty "
1784 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
1785 "2521 READ_FCF_RECORD mailbox failed "
1786 "with status x%x add_status x%x, "
1787 "mbx\n", shdr_status
, shdr_add_status
);
1791 /* Interpreting the returned information of the FCF record */
1792 read_fcf
= (struct lpfc_mbx_read_fcf_tbl
*)virt_addr
;
1793 lpfc_sli_pcimem_bcopy(read_fcf
, read_fcf
,
1794 sizeof(struct lpfc_mbx_read_fcf_tbl
));
1795 *next_fcf_index
= bf_get(lpfc_mbx_read_fcf_tbl_nxt_vindx
, read_fcf
);
1796 new_fcf_record
= (struct fcf_record
*)(virt_addr
+
1797 sizeof(struct lpfc_mbx_read_fcf_tbl
));
1798 lpfc_sli_pcimem_bcopy(new_fcf_record
, new_fcf_record
,
1799 offsetof(struct fcf_record
, vlan_bitmap
));
1800 new_fcf_record
->word137
= le32_to_cpu(new_fcf_record
->word137
);
1801 new_fcf_record
->word138
= le32_to_cpu(new_fcf_record
->word138
);
1803 return new_fcf_record
;
1807 * lpfc_sli4_log_fcf_record_info - Log the information of a fcf record
1808 * @phba: pointer to lpfc hba data structure.
1809 * @fcf_record: pointer to the fcf record.
1810 * @vlan_id: the lowest vlan identifier associated to this fcf record.
1811 * @next_fcf_index: the index to the next fcf record in hba's fcf table.
1813 * This routine logs the detailed FCF record if the LOG_FIP loggin is
1817 lpfc_sli4_log_fcf_record_info(struct lpfc_hba
*phba
,
1818 struct fcf_record
*fcf_record
,
1820 uint16_t next_fcf_index
)
1822 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1823 "2764 READ_FCF_RECORD:\n"
1824 "\tFCF_Index : x%x\n"
1825 "\tFCF_Avail : x%x\n"
1826 "\tFCF_Valid : x%x\n"
1827 "\tFIP_Priority : x%x\n"
1828 "\tMAC_Provider : x%x\n"
1829 "\tLowest VLANID : x%x\n"
1830 "\tFCF_MAC Addr : x%x:%x:%x:%x:%x:%x\n"
1831 "\tFabric_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1832 "\tSwitch_Name : x%x:%x:%x:%x:%x:%x:%x:%x\n"
1833 "\tNext_FCF_Index: x%x\n",
1834 bf_get(lpfc_fcf_record_fcf_index
, fcf_record
),
1835 bf_get(lpfc_fcf_record_fcf_avail
, fcf_record
),
1836 bf_get(lpfc_fcf_record_fcf_valid
, fcf_record
),
1837 fcf_record
->fip_priority
,
1838 bf_get(lpfc_fcf_record_mac_addr_prov
, fcf_record
),
1840 bf_get(lpfc_fcf_record_mac_0
, fcf_record
),
1841 bf_get(lpfc_fcf_record_mac_1
, fcf_record
),
1842 bf_get(lpfc_fcf_record_mac_2
, fcf_record
),
1843 bf_get(lpfc_fcf_record_mac_3
, fcf_record
),
1844 bf_get(lpfc_fcf_record_mac_4
, fcf_record
),
1845 bf_get(lpfc_fcf_record_mac_5
, fcf_record
),
1846 bf_get(lpfc_fcf_record_fab_name_0
, fcf_record
),
1847 bf_get(lpfc_fcf_record_fab_name_1
, fcf_record
),
1848 bf_get(lpfc_fcf_record_fab_name_2
, fcf_record
),
1849 bf_get(lpfc_fcf_record_fab_name_3
, fcf_record
),
1850 bf_get(lpfc_fcf_record_fab_name_4
, fcf_record
),
1851 bf_get(lpfc_fcf_record_fab_name_5
, fcf_record
),
1852 bf_get(lpfc_fcf_record_fab_name_6
, fcf_record
),
1853 bf_get(lpfc_fcf_record_fab_name_7
, fcf_record
),
1854 bf_get(lpfc_fcf_record_switch_name_0
, fcf_record
),
1855 bf_get(lpfc_fcf_record_switch_name_1
, fcf_record
),
1856 bf_get(lpfc_fcf_record_switch_name_2
, fcf_record
),
1857 bf_get(lpfc_fcf_record_switch_name_3
, fcf_record
),
1858 bf_get(lpfc_fcf_record_switch_name_4
, fcf_record
),
1859 bf_get(lpfc_fcf_record_switch_name_5
, fcf_record
),
1860 bf_get(lpfc_fcf_record_switch_name_6
, fcf_record
),
1861 bf_get(lpfc_fcf_record_switch_name_7
, fcf_record
),
1866 lpfc_sli4_fcf_record_match - testing new FCF record for matching existing FCF
1867 * @phba: pointer to lpfc hba data structure.
1868 * @fcf_rec: pointer to an existing FCF record.
1869 * @new_fcf_record: pointer to a new FCF record.
1870 * @new_vlan_id: vlan id from the new FCF record.
1872 * This function performs matching test of a new FCF record against an existing
1873 * FCF record. If the new_vlan_id passed in is LPFC_FCOE_IGNORE_VID, vlan id
1874 * will not be used as part of the FCF record matching criteria.
1876 * Returns true if all the fields matching, otherwise returns false.
1879 lpfc_sli4_fcf_record_match(struct lpfc_hba
*phba
,
1880 struct lpfc_fcf_rec
*fcf_rec
,
1881 struct fcf_record
*new_fcf_record
,
1882 uint16_t new_vlan_id
)
1884 if (new_vlan_id
!= LPFC_FCOE_IGNORE_VID
)
1885 if (!lpfc_vlan_id_match(fcf_rec
->vlan_id
, new_vlan_id
))
1887 if (!lpfc_mac_addr_match(fcf_rec
->mac_addr
, new_fcf_record
))
1889 if (!lpfc_sw_name_match(fcf_rec
->switch_name
, new_fcf_record
))
1891 if (!lpfc_fab_name_match(fcf_rec
->fabric_name
, new_fcf_record
))
1893 if (fcf_rec
->priority
!= new_fcf_record
->fip_priority
)
1899 * lpfc_sli4_fcf_rr_next_proc - processing next roundrobin fcf
1900 * @vport: Pointer to vport object.
1901 * @fcf_index: index to next fcf.
1903 * This function processing the roundrobin fcf failover to next fcf index.
1904 * When this function is invoked, there will be a current fcf registered
1906 * Return: 0 for continue retrying flogi on currently registered fcf;
1907 * 1 for stop flogi on currently registered fcf;
1909 int lpfc_sli4_fcf_rr_next_proc(struct lpfc_vport
*vport
, uint16_t fcf_index
)
1911 struct lpfc_hba
*phba
= vport
->phba
;
1914 if (fcf_index
== LPFC_FCOE_FCF_NEXT_NONE
) {
1915 spin_lock_irq(&phba
->hbalock
);
1916 if (phba
->hba_flag
& HBA_DEVLOSS_TMO
) {
1917 spin_unlock_irq(&phba
->hbalock
);
1918 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1919 "2872 Devloss tmo with no eligible "
1920 "FCF, unregister in-use FCF (x%x) "
1921 "and rescan FCF table\n",
1922 phba
->fcf
.current_rec
.fcf_indx
);
1923 lpfc_unregister_fcf_rescan(phba
);
1924 goto stop_flogi_current_fcf
;
1926 /* Mark the end to FLOGI roundrobin failover */
1927 phba
->hba_flag
&= ~FCF_RR_INPROG
;
1928 /* Allow action to new fcf asynchronous event */
1929 phba
->fcf
.fcf_flag
&= ~(FCF_AVAILABLE
| FCF_SCAN_DONE
);
1930 spin_unlock_irq(&phba
->hbalock
);
1931 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1932 "2865 No FCF available, stop roundrobin FCF "
1933 "failover and change port state:x%x/x%x\n",
1934 phba
->pport
->port_state
, LPFC_VPORT_UNKNOWN
);
1935 phba
->pport
->port_state
= LPFC_VPORT_UNKNOWN
;
1936 goto stop_flogi_current_fcf
;
1938 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_ELS
,
1939 "2794 Try FLOGI roundrobin FCF failover to "
1940 "(x%x)\n", fcf_index
);
1941 rc
= lpfc_sli4_fcf_rr_read_fcf_rec(phba
, fcf_index
);
1943 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
| LOG_ELS
,
1944 "2761 FLOGI roundrobin FCF failover "
1945 "failed (rc:x%x) to read FCF (x%x)\n",
1946 rc
, phba
->fcf
.current_rec
.fcf_indx
);
1948 goto stop_flogi_current_fcf
;
1952 stop_flogi_current_fcf
:
1953 lpfc_can_disctmo(vport
);
1958 * lpfc_sli4_fcf_pri_list_del
1959 * @phba: pointer to lpfc hba data structure.
1960 * @fcf_index the index of the fcf record to delete
1961 * This routine checks the on list flag of the fcf_index to be deleted.
1962 * If it is one the list then it is removed from the list, and the flag
1963 * is cleared. This routine grab the hbalock before removing the fcf
1964 * record from the list.
1966 static void lpfc_sli4_fcf_pri_list_del(struct lpfc_hba
*phba
,
1969 struct lpfc_fcf_pri
*new_fcf_pri
;
1971 new_fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
1972 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
1973 "3058 deleting idx x%x pri x%x flg x%x\n",
1974 fcf_index
, new_fcf_pri
->fcf_rec
.priority
,
1975 new_fcf_pri
->fcf_rec
.flag
);
1976 spin_lock_irq(&phba
->hbalock
);
1977 if (new_fcf_pri
->fcf_rec
.flag
& LPFC_FCF_ON_PRI_LIST
) {
1978 if (phba
->fcf
.current_rec
.priority
==
1979 new_fcf_pri
->fcf_rec
.priority
)
1980 phba
->fcf
.eligible_fcf_cnt
--;
1981 list_del_init(&new_fcf_pri
->list
);
1982 new_fcf_pri
->fcf_rec
.flag
&= ~LPFC_FCF_ON_PRI_LIST
;
1984 spin_unlock_irq(&phba
->hbalock
);
1988 * lpfc_sli4_set_fcf_flogi_fail
1989 * @phba: pointer to lpfc hba data structure.
1990 * @fcf_index the index of the fcf record to update
1991 * This routine acquires the hbalock and then set the LPFC_FCF_FLOGI_FAILED
1992 * flag so the the round robin slection for the particular priority level
1993 * will try a different fcf record that does not have this bit set.
1994 * If the fcf record is re-read for any reason this flag is cleared brfore
1995 * adding it to the priority list.
1998 lpfc_sli4_set_fcf_flogi_fail(struct lpfc_hba
*phba
, uint16_t fcf_index
)
2000 struct lpfc_fcf_pri
*new_fcf_pri
;
2001 new_fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
2002 spin_lock_irq(&phba
->hbalock
);
2003 new_fcf_pri
->fcf_rec
.flag
|= LPFC_FCF_FLOGI_FAILED
;
2004 spin_unlock_irq(&phba
->hbalock
);
2008 * lpfc_sli4_fcf_pri_list_add
2009 * @phba: pointer to lpfc hba data structure.
2010 * @fcf_index the index of the fcf record to add
2011 * This routine checks the priority of the fcf_index to be added.
2012 * If it is a lower priority than the current head of the fcf_pri list
2013 * then it is added to the list in the right order.
2014 * If it is the same priority as the current head of the list then it
2015 * is added to the head of the list and its bit in the rr_bmask is set.
2016 * If the fcf_index to be added is of a higher priority than the current
2017 * head of the list then the rr_bmask is cleared, its bit is set in the
2018 * rr_bmask and it is added to the head of the list.
2020 * 0=success 1=failure
2022 int lpfc_sli4_fcf_pri_list_add(struct lpfc_hba
*phba
, uint16_t fcf_index
,
2023 struct fcf_record
*new_fcf_record
)
2025 uint16_t current_fcf_pri
;
2026 uint16_t last_index
;
2027 struct lpfc_fcf_pri
*fcf_pri
;
2028 struct lpfc_fcf_pri
*next_fcf_pri
;
2029 struct lpfc_fcf_pri
*new_fcf_pri
;
2032 new_fcf_pri
= &phba
->fcf
.fcf_pri
[fcf_index
];
2033 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2034 "3059 adding idx x%x pri x%x flg x%x\n",
2035 fcf_index
, new_fcf_record
->fip_priority
,
2036 new_fcf_pri
->fcf_rec
.flag
);
2037 spin_lock_irq(&phba
->hbalock
);
2038 if (new_fcf_pri
->fcf_rec
.flag
& LPFC_FCF_ON_PRI_LIST
)
2039 list_del_init(&new_fcf_pri
->list
);
2040 new_fcf_pri
->fcf_rec
.fcf_index
= fcf_index
;
2041 new_fcf_pri
->fcf_rec
.priority
= new_fcf_record
->fip_priority
;
2042 if (list_empty(&phba
->fcf
.fcf_pri_list
)) {
2043 list_add(&new_fcf_pri
->list
, &phba
->fcf
.fcf_pri_list
);
2044 ret
= lpfc_sli4_fcf_rr_index_set(phba
,
2045 new_fcf_pri
->fcf_rec
.fcf_index
);
2049 last_index
= find_first_bit(phba
->fcf
.fcf_rr_bmask
,
2050 LPFC_SLI4_FCF_TBL_INDX_MAX
);
2051 if (last_index
>= LPFC_SLI4_FCF_TBL_INDX_MAX
) {
2052 ret
= 0; /* Empty rr list */
2055 current_fcf_pri
= phba
->fcf
.fcf_pri
[last_index
].fcf_rec
.priority
;
2056 if (new_fcf_pri
->fcf_rec
.priority
<= current_fcf_pri
) {
2057 list_add(&new_fcf_pri
->list
, &phba
->fcf
.fcf_pri_list
);
2058 if (new_fcf_pri
->fcf_rec
.priority
< current_fcf_pri
) {
2059 memset(phba
->fcf
.fcf_rr_bmask
, 0,
2060 sizeof(*phba
->fcf
.fcf_rr_bmask
));
2061 /* fcfs_at_this_priority_level = 1; */
2062 phba
->fcf
.eligible_fcf_cnt
= 1;
2064 /* fcfs_at_this_priority_level++; */
2065 phba
->fcf
.eligible_fcf_cnt
++;
2066 ret
= lpfc_sli4_fcf_rr_index_set(phba
,
2067 new_fcf_pri
->fcf_rec
.fcf_index
);
2071 list_for_each_entry_safe(fcf_pri
, next_fcf_pri
,
2072 &phba
->fcf
.fcf_pri_list
, list
) {
2073 if (new_fcf_pri
->fcf_rec
.priority
<=
2074 fcf_pri
->fcf_rec
.priority
) {
2075 if (fcf_pri
->list
.prev
== &phba
->fcf
.fcf_pri_list
)
2076 list_add(&new_fcf_pri
->list
,
2077 &phba
->fcf
.fcf_pri_list
);
2079 list_add(&new_fcf_pri
->list
,
2080 &((struct lpfc_fcf_pri
*)
2081 fcf_pri
->list
.prev
)->list
);
2084 } else if (fcf_pri
->list
.next
== &phba
->fcf
.fcf_pri_list
2085 || new_fcf_pri
->fcf_rec
.priority
<
2086 next_fcf_pri
->fcf_rec
.priority
) {
2087 list_add(&new_fcf_pri
->list
, &fcf_pri
->list
);
2091 if (new_fcf_pri
->fcf_rec
.priority
> fcf_pri
->fcf_rec
.priority
)
2097 /* we use = instead of |= to clear the FLOGI_FAILED flag. */
2098 new_fcf_pri
->fcf_rec
.flag
= LPFC_FCF_ON_PRI_LIST
;
2099 spin_unlock_irq(&phba
->hbalock
);
2104 * lpfc_mbx_cmpl_fcf_scan_read_fcf_rec - fcf scan read_fcf mbox cmpl handler.
2105 * @phba: pointer to lpfc hba data structure.
2106 * @mboxq: pointer to mailbox object.
2108 * This function iterates through all the fcf records available in
2109 * HBA and chooses the optimal FCF record for discovery. After finding
2110 * the FCF for discovery it registers the FCF record and kicks start
2112 * If FCF_IN_USE flag is set in currently used FCF, the routine tries to
2113 * use an FCF record which matches fabric name and mac address of the
2114 * currently used FCF record.
2115 * If the driver supports only one FCF, it will try to use the FCF record
2116 * used by BOOT_BIOS.
2119 lpfc_mbx_cmpl_fcf_scan_read_fcf_rec(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2121 struct fcf_record
*new_fcf_record
;
2122 uint32_t boot_flag
, addr_mode
;
2123 uint16_t fcf_index
, next_fcf_index
;
2124 struct lpfc_fcf_rec
*fcf_rec
= NULL
;
2127 bool select_new_fcf
;
2130 /* If there is pending FCoE event restart FCF table scan */
2131 if (lpfc_check_pending_fcoe_event(phba
, LPFC_SKIP_UNREG_FCF
)) {
2132 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2136 /* Parse the FCF record from the non-embedded mailbox command */
2137 new_fcf_record
= lpfc_sli4_fcf_rec_mbox_parse(phba
, mboxq
,
2139 if (!new_fcf_record
) {
2140 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
2141 "2765 Mailbox command READ_FCF_RECORD "
2142 "failed to retrieve a FCF record.\n");
2143 /* Let next new FCF event trigger fast failover */
2144 spin_lock_irq(&phba
->hbalock
);
2145 phba
->hba_flag
&= ~FCF_TS_INPROG
;
2146 spin_unlock_irq(&phba
->hbalock
);
2147 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2151 /* Check the FCF record against the connection list */
2152 rc
= lpfc_match_fcf_conn_list(phba
, new_fcf_record
, &boot_flag
,
2153 &addr_mode
, &vlan_id
);
2155 /* Log the FCF record information if turned on */
2156 lpfc_sli4_log_fcf_record_info(phba
, new_fcf_record
, vlan_id
,
2160 * If the fcf record does not match with connect list entries
2161 * read the next entry; otherwise, this is an eligible FCF
2162 * record for roundrobin FCF failover.
2165 lpfc_sli4_fcf_pri_list_del(phba
,
2166 bf_get(lpfc_fcf_record_fcf_index
,
2168 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2169 "2781 FCF (x%x) failed connection "
2170 "list check: (x%x/x%x)\n",
2171 bf_get(lpfc_fcf_record_fcf_index
,
2173 bf_get(lpfc_fcf_record_fcf_avail
,
2175 bf_get(lpfc_fcf_record_fcf_valid
,
2177 if ((phba
->fcf
.fcf_flag
& FCF_IN_USE
) &&
2178 lpfc_sli4_fcf_record_match(phba
, &phba
->fcf
.current_rec
,
2179 new_fcf_record
, LPFC_FCOE_IGNORE_VID
)) {
2180 if (bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
) !=
2181 phba
->fcf
.current_rec
.fcf_indx
) {
2182 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
2183 "2862 FCF (x%x) matches property "
2184 "of in-use FCF (x%x)\n",
2185 bf_get(lpfc_fcf_record_fcf_index
,
2187 phba
->fcf
.current_rec
.fcf_indx
);
2191 * In case the current in-use FCF record becomes
2192 * invalid/unavailable during FCF discovery that
2193 * was not triggered by fast FCF failover process,
2194 * treat it as fast FCF failover.
2196 if (!(phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
) &&
2197 !(phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)) {
2198 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2199 "2835 Invalid in-use FCF "
2200 "(x%x), enter FCF failover "
2202 phba
->fcf
.current_rec
.fcf_indx
);
2203 spin_lock_irq(&phba
->hbalock
);
2204 phba
->fcf
.fcf_flag
|= FCF_REDISC_FOV
;
2205 spin_unlock_irq(&phba
->hbalock
);
2206 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2207 lpfc_sli4_fcf_scan_read_fcf_rec(phba
,
2208 LPFC_FCOE_FCF_GET_FIRST
);
2214 fcf_index
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
2215 rc
= lpfc_sli4_fcf_pri_list_add(phba
, fcf_index
,
2222 * If this is not the first FCF discovery of the HBA, use last
2223 * FCF record for the discovery. The condition that a rescan
2224 * matches the in-use FCF record: fabric name, switch name, mac
2225 * address, and vlan_id.
2227 spin_lock_irq(&phba
->hbalock
);
2228 if (phba
->fcf
.fcf_flag
& FCF_IN_USE
) {
2229 if (phba
->cfg_fcf_failover_policy
== LPFC_FCF_FOV
&&
2230 lpfc_sli4_fcf_record_match(phba
, &phba
->fcf
.current_rec
,
2231 new_fcf_record
, vlan_id
)) {
2232 if (bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
) ==
2233 phba
->fcf
.current_rec
.fcf_indx
) {
2234 phba
->fcf
.fcf_flag
|= FCF_AVAILABLE
;
2235 if (phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
)
2236 /* Stop FCF redisc wait timer */
2237 __lpfc_sli4_stop_fcf_redisc_wait_timer(
2239 else if (phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)
2240 /* Fast failover, mark completed */
2241 phba
->fcf
.fcf_flag
&= ~FCF_REDISC_FOV
;
2242 spin_unlock_irq(&phba
->hbalock
);
2243 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2244 "2836 New FCF matches in-use "
2246 phba
->fcf
.current_rec
.fcf_indx
);
2249 lpfc_printf_log(phba
, KERN_ERR
, LOG_FIP
,
2250 "2863 New FCF (x%x) matches "
2251 "property of in-use FCF (x%x)\n",
2252 bf_get(lpfc_fcf_record_fcf_index
,
2254 phba
->fcf
.current_rec
.fcf_indx
);
2257 * Read next FCF record from HBA searching for the matching
2258 * with in-use record only if not during the fast failover
2259 * period. In case of fast failover period, it shall try to
2260 * determine whether the FCF record just read should be the
2263 if (!(phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)) {
2264 spin_unlock_irq(&phba
->hbalock
);
2269 * Update on failover FCF record only if it's in FCF fast-failover
2270 * period; otherwise, update on current FCF record.
2272 if (phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
)
2273 fcf_rec
= &phba
->fcf
.failover_rec
;
2275 fcf_rec
= &phba
->fcf
.current_rec
;
2277 if (phba
->fcf
.fcf_flag
& FCF_AVAILABLE
) {
2279 * If the driver FCF record does not have boot flag
2280 * set and new hba fcf record has boot flag set, use
2281 * the new hba fcf record.
2283 if (boot_flag
&& !(fcf_rec
->flag
& BOOT_ENABLE
)) {
2284 /* Choose this FCF record */
2285 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2286 "2837 Update current FCF record "
2287 "(x%x) with new FCF record (x%x)\n",
2289 bf_get(lpfc_fcf_record_fcf_index
,
2291 __lpfc_update_fcf_record(phba
, fcf_rec
, new_fcf_record
,
2292 addr_mode
, vlan_id
, BOOT_ENABLE
);
2293 spin_unlock_irq(&phba
->hbalock
);
2297 * If the driver FCF record has boot flag set and the
2298 * new hba FCF record does not have boot flag, read
2299 * the next FCF record.
2301 if (!boot_flag
&& (fcf_rec
->flag
& BOOT_ENABLE
)) {
2302 spin_unlock_irq(&phba
->hbalock
);
2306 * If the new hba FCF record has lower priority value
2307 * than the driver FCF record, use the new record.
2309 if (new_fcf_record
->fip_priority
< fcf_rec
->priority
) {
2310 /* Choose the new FCF record with lower priority */
2311 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2312 "2838 Update current FCF record "
2313 "(x%x) with new FCF record (x%x)\n",
2315 bf_get(lpfc_fcf_record_fcf_index
,
2317 __lpfc_update_fcf_record(phba
, fcf_rec
, new_fcf_record
,
2318 addr_mode
, vlan_id
, 0);
2319 /* Reset running random FCF selection count */
2320 phba
->fcf
.eligible_fcf_cnt
= 1;
2321 } else if (new_fcf_record
->fip_priority
== fcf_rec
->priority
) {
2322 /* Update running random FCF selection count */
2323 phba
->fcf
.eligible_fcf_cnt
++;
2324 select_new_fcf
= lpfc_sli4_new_fcf_random_select(phba
,
2325 phba
->fcf
.eligible_fcf_cnt
);
2326 if (select_new_fcf
) {
2327 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2328 "2839 Update current FCF record "
2329 "(x%x) with new FCF record (x%x)\n",
2331 bf_get(lpfc_fcf_record_fcf_index
,
2333 /* Choose the new FCF by random selection */
2334 __lpfc_update_fcf_record(phba
, fcf_rec
,
2336 addr_mode
, vlan_id
, 0);
2339 spin_unlock_irq(&phba
->hbalock
);
2343 * This is the first suitable FCF record, choose this record for
2344 * initial best-fit FCF.
2347 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2348 "2840 Update initial FCF candidate "
2350 bf_get(lpfc_fcf_record_fcf_index
,
2352 __lpfc_update_fcf_record(phba
, fcf_rec
, new_fcf_record
,
2353 addr_mode
, vlan_id
, (boot_flag
?
2355 phba
->fcf
.fcf_flag
|= FCF_AVAILABLE
;
2356 /* Setup initial running random FCF selection count */
2357 phba
->fcf
.eligible_fcf_cnt
= 1;
2358 /* Seeding the random number generator for random selection */
2359 seed
= (uint32_t)(0xFFFFFFFF & jiffies
);
2362 spin_unlock_irq(&phba
->hbalock
);
2366 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2367 if (next_fcf_index
== LPFC_FCOE_FCF_NEXT_NONE
|| next_fcf_index
== 0) {
2368 if (phba
->fcf
.fcf_flag
& FCF_REDISC_FOV
) {
2370 * Case of FCF fast failover scan
2374 * It has not found any suitable FCF record, cancel
2375 * FCF scan inprogress, and do nothing
2377 if (!(phba
->fcf
.failover_rec
.flag
& RECORD_VALID
)) {
2378 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2379 "2782 No suitable FCF found: "
2381 phba
->fcoe_eventtag_at_fcf_scan
,
2382 bf_get(lpfc_fcf_record_fcf_index
,
2384 spin_lock_irq(&phba
->hbalock
);
2385 if (phba
->hba_flag
& HBA_DEVLOSS_TMO
) {
2386 phba
->hba_flag
&= ~FCF_TS_INPROG
;
2387 spin_unlock_irq(&phba
->hbalock
);
2388 /* Unregister in-use FCF and rescan */
2389 lpfc_printf_log(phba
, KERN_INFO
,
2391 "2864 On devloss tmo "
2392 "unreg in-use FCF and "
2393 "rescan FCF table\n");
2394 lpfc_unregister_fcf_rescan(phba
);
2398 * Let next new FCF event trigger fast failover
2400 phba
->hba_flag
&= ~FCF_TS_INPROG
;
2401 spin_unlock_irq(&phba
->hbalock
);
2405 * It has found a suitable FCF record that is not
2406 * the same as in-use FCF record, unregister the
2407 * in-use FCF record, replace the in-use FCF record
2408 * with the new FCF record, mark FCF fast failover
2409 * completed, and then start register the new FCF
2413 /* Unregister the current in-use FCF record */
2414 lpfc_unregister_fcf(phba
);
2416 /* Replace in-use record with the new record */
2417 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2418 "2842 Replace in-use FCF (x%x) "
2419 "with failover FCF (x%x)\n",
2420 phba
->fcf
.current_rec
.fcf_indx
,
2421 phba
->fcf
.failover_rec
.fcf_indx
);
2422 memcpy(&phba
->fcf
.current_rec
,
2423 &phba
->fcf
.failover_rec
,
2424 sizeof(struct lpfc_fcf_rec
));
2426 * Mark the fast FCF failover rediscovery completed
2427 * and the start of the first round of the roundrobin
2430 spin_lock_irq(&phba
->hbalock
);
2431 phba
->fcf
.fcf_flag
&= ~FCF_REDISC_FOV
;
2432 spin_unlock_irq(&phba
->hbalock
);
2433 /* Register to the new FCF record */
2434 lpfc_register_fcf(phba
);
2437 * In case of transaction period to fast FCF failover,
2438 * do nothing when search to the end of the FCF table.
2440 if ((phba
->fcf
.fcf_flag
& FCF_REDISC_EVT
) ||
2441 (phba
->fcf
.fcf_flag
& FCF_REDISC_PEND
))
2444 if (phba
->cfg_fcf_failover_policy
== LPFC_FCF_FOV
&&
2445 phba
->fcf
.fcf_flag
& FCF_IN_USE
) {
2447 * In case the current in-use FCF record no
2448 * longer existed during FCF discovery that
2449 * was not triggered by fast FCF failover
2450 * process, treat it as fast FCF failover.
2452 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2453 "2841 In-use FCF record (x%x) "
2454 "not reported, entering fast "
2455 "FCF failover mode scanning.\n",
2456 phba
->fcf
.current_rec
.fcf_indx
);
2457 spin_lock_irq(&phba
->hbalock
);
2458 phba
->fcf
.fcf_flag
|= FCF_REDISC_FOV
;
2459 spin_unlock_irq(&phba
->hbalock
);
2460 lpfc_sli4_fcf_scan_read_fcf_rec(phba
,
2461 LPFC_FCOE_FCF_GET_FIRST
);
2464 /* Register to the new FCF record */
2465 lpfc_register_fcf(phba
);
2468 lpfc_sli4_fcf_scan_read_fcf_rec(phba
, next_fcf_index
);
2472 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2473 lpfc_register_fcf(phba
);
2479 * lpfc_mbx_cmpl_fcf_rr_read_fcf_rec - fcf roundrobin read_fcf mbox cmpl hdler
2480 * @phba: pointer to lpfc hba data structure.
2481 * @mboxq: pointer to mailbox object.
2483 * This is the callback function for FLOGI failure roundrobin FCF failover
2484 * read FCF record mailbox command from the eligible FCF record bmask for
2485 * performing the failover. If the FCF read back is not valid/available, it
2486 * fails through to retrying FLOGI to the currently registered FCF again.
2487 * Otherwise, if the FCF read back is valid and available, it will set the
2488 * newly read FCF record to the failover FCF record, unregister currently
2489 * registered FCF record, copy the failover FCF record to the current
2490 * FCF record, and then register the current FCF record before proceeding
2491 * to trying FLOGI on the new failover FCF.
2494 lpfc_mbx_cmpl_fcf_rr_read_fcf_rec(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2496 struct fcf_record
*new_fcf_record
;
2497 uint32_t boot_flag
, addr_mode
;
2498 uint16_t next_fcf_index
, fcf_index
;
2499 uint16_t current_fcf_index
;
2503 /* If link state is not up, stop the roundrobin failover process */
2504 if (phba
->link_state
< LPFC_LINK_UP
) {
2505 spin_lock_irq(&phba
->hbalock
);
2506 phba
->fcf
.fcf_flag
&= ~FCF_DISCOVERY
;
2507 phba
->hba_flag
&= ~FCF_RR_INPROG
;
2508 spin_unlock_irq(&phba
->hbalock
);
2512 /* Parse the FCF record from the non-embedded mailbox command */
2513 new_fcf_record
= lpfc_sli4_fcf_rec_mbox_parse(phba
, mboxq
,
2515 if (!new_fcf_record
) {
2516 lpfc_printf_log(phba
, KERN_WARNING
, LOG_FIP
,
2517 "2766 Mailbox command READ_FCF_RECORD "
2518 "failed to retrieve a FCF record.\n");
2522 /* Get the needed parameters from FCF record */
2523 rc
= lpfc_match_fcf_conn_list(phba
, new_fcf_record
, &boot_flag
,
2524 &addr_mode
, &vlan_id
);
2526 /* Log the FCF record information if turned on */
2527 lpfc_sli4_log_fcf_record_info(phba
, new_fcf_record
, vlan_id
,
2530 fcf_index
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
2532 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2533 "2848 Remove ineligible FCF (x%x) from "
2534 "from roundrobin bmask\n", fcf_index
);
2535 /* Clear roundrobin bmask bit for ineligible FCF */
2536 lpfc_sli4_fcf_rr_index_clear(phba
, fcf_index
);
2537 /* Perform next round of roundrobin FCF failover */
2538 fcf_index
= lpfc_sli4_fcf_rr_next_index_get(phba
);
2539 rc
= lpfc_sli4_fcf_rr_next_proc(phba
->pport
, fcf_index
);
2545 if (fcf_index
== phba
->fcf
.current_rec
.fcf_indx
) {
2546 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2547 "2760 Perform FLOGI roundrobin FCF failover: "
2548 "FCF (x%x) back to FCF (x%x)\n",
2549 phba
->fcf
.current_rec
.fcf_indx
, fcf_index
);
2550 /* Wait 500 ms before retrying FLOGI to current FCF */
2552 lpfc_issue_init_vfi(phba
->pport
);
2556 /* Upload new FCF record to the failover FCF record */
2557 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2558 "2834 Update current FCF (x%x) with new FCF (x%x)\n",
2559 phba
->fcf
.failover_rec
.fcf_indx
, fcf_index
);
2560 spin_lock_irq(&phba
->hbalock
);
2561 __lpfc_update_fcf_record(phba
, &phba
->fcf
.failover_rec
,
2562 new_fcf_record
, addr_mode
, vlan_id
,
2563 (boot_flag
? BOOT_ENABLE
: 0));
2564 spin_unlock_irq(&phba
->hbalock
);
2566 current_fcf_index
= phba
->fcf
.current_rec
.fcf_indx
;
2568 /* Unregister the current in-use FCF record */
2569 lpfc_unregister_fcf(phba
);
2571 /* Replace in-use record with the new record */
2572 memcpy(&phba
->fcf
.current_rec
, &phba
->fcf
.failover_rec
,
2573 sizeof(struct lpfc_fcf_rec
));
2575 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2576 "2783 Perform FLOGI roundrobin FCF failover: FCF "
2577 "(x%x) to FCF (x%x)\n", current_fcf_index
, fcf_index
);
2580 lpfc_register_fcf(phba
);
2582 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2586 * lpfc_mbx_cmpl_read_fcf_rec - read fcf completion handler.
2587 * @phba: pointer to lpfc hba data structure.
2588 * @mboxq: pointer to mailbox object.
2590 * This is the callback function of read FCF record mailbox command for
2591 * updating the eligible FCF bmask for FLOGI failure roundrobin FCF
2592 * failover when a new FCF event happened. If the FCF read back is
2593 * valid/available and it passes the connection list check, it updates
2594 * the bmask for the eligible FCF record for roundrobin failover.
2597 lpfc_mbx_cmpl_read_fcf_rec(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2599 struct fcf_record
*new_fcf_record
;
2600 uint32_t boot_flag
, addr_mode
;
2601 uint16_t fcf_index
, next_fcf_index
;
2605 /* If link state is not up, no need to proceed */
2606 if (phba
->link_state
< LPFC_LINK_UP
)
2609 /* If FCF discovery period is over, no need to proceed */
2610 if (!(phba
->fcf
.fcf_flag
& FCF_DISCOVERY
))
2613 /* Parse the FCF record from the non-embedded mailbox command */
2614 new_fcf_record
= lpfc_sli4_fcf_rec_mbox_parse(phba
, mboxq
,
2616 if (!new_fcf_record
) {
2617 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
,
2618 "2767 Mailbox command READ_FCF_RECORD "
2619 "failed to retrieve a FCF record.\n");
2623 /* Check the connection list for eligibility */
2624 rc
= lpfc_match_fcf_conn_list(phba
, new_fcf_record
, &boot_flag
,
2625 &addr_mode
, &vlan_id
);
2627 /* Log the FCF record information if turned on */
2628 lpfc_sli4_log_fcf_record_info(phba
, new_fcf_record
, vlan_id
,
2634 /* Update the eligible FCF record index bmask */
2635 fcf_index
= bf_get(lpfc_fcf_record_fcf_index
, new_fcf_record
);
2637 rc
= lpfc_sli4_fcf_pri_list_add(phba
, fcf_index
, new_fcf_record
);
2640 lpfc_sli4_mbox_cmd_free(phba
, mboxq
);
2644 * lpfc_init_vfi_cmpl - Completion handler for init_vfi mbox command.
2645 * @phba: pointer to lpfc hba data structure.
2646 * @mboxq: pointer to mailbox data structure.
2648 * This function handles completion of init vfi mailbox command.
2651 lpfc_init_vfi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2653 struct lpfc_vport
*vport
= mboxq
->vport
;
2656 * VFI not supported on interface type 0, just do the flogi
2657 * Also continue if the VFI is in use - just use the same one.
2659 if (mboxq
->u
.mb
.mbxStatus
&&
2660 (bf_get(lpfc_sli_intf_if_type
, &phba
->sli4_hba
.sli_intf
) !=
2661 LPFC_SLI_INTF_IF_TYPE_0
) &&
2662 mboxq
->u
.mb
.mbxStatus
!= MBX_VFI_IN_USE
) {
2663 lpfc_printf_vlog(vport
, KERN_ERR
,
2665 "2891 Init VFI mailbox failed 0x%x\n",
2666 mboxq
->u
.mb
.mbxStatus
);
2667 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2668 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
2672 lpfc_initial_flogi(vport
);
2673 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2678 * lpfc_issue_init_vfi - Issue init_vfi mailbox command.
2679 * @vport: pointer to lpfc_vport data structure.
2681 * This function issue a init_vfi mailbox command to initialize the VFI and
2682 * VPI for the physical port.
2685 lpfc_issue_init_vfi(struct lpfc_vport
*vport
)
2687 LPFC_MBOXQ_t
*mboxq
;
2689 struct lpfc_hba
*phba
= vport
->phba
;
2691 mboxq
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
2693 lpfc_printf_vlog(vport
, KERN_ERR
,
2694 LOG_MBOX
, "2892 Failed to allocate "
2695 "init_vfi mailbox\n");
2698 lpfc_init_vfi(mboxq
, vport
);
2699 mboxq
->mbox_cmpl
= lpfc_init_vfi_cmpl
;
2700 rc
= lpfc_sli_issue_mbox(phba
, mboxq
, MBX_NOWAIT
);
2701 if (rc
== MBX_NOT_FINISHED
) {
2702 lpfc_printf_vlog(vport
, KERN_ERR
,
2703 LOG_MBOX
, "2893 Failed to issue init_vfi mailbox\n");
2704 mempool_free(mboxq
, vport
->phba
->mbox_mem_pool
);
2709 * lpfc_init_vpi_cmpl - Completion handler for init_vpi mbox command.
2710 * @phba: pointer to lpfc hba data structure.
2711 * @mboxq: pointer to mailbox data structure.
2713 * This function handles completion of init vpi mailbox command.
2716 lpfc_init_vpi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2718 struct lpfc_vport
*vport
= mboxq
->vport
;
2719 struct lpfc_nodelist
*ndlp
;
2720 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
2722 if (mboxq
->u
.mb
.mbxStatus
) {
2723 lpfc_printf_vlog(vport
, KERN_ERR
,
2725 "2609 Init VPI mailbox failed 0x%x\n",
2726 mboxq
->u
.mb
.mbxStatus
);
2727 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2728 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
2731 spin_lock_irq(shost
->host_lock
);
2732 vport
->fc_flag
&= ~FC_VPORT_NEEDS_INIT_VPI
;
2733 spin_unlock_irq(shost
->host_lock
);
2735 /* If this port is physical port or FDISC is done, do reg_vpi */
2736 if ((phba
->pport
== vport
) || (vport
->port_state
== LPFC_FDISC
)) {
2737 ndlp
= lpfc_findnode_did(vport
, Fabric_DID
);
2739 lpfc_printf_vlog(vport
, KERN_ERR
,
2741 "2731 Cannot find fabric "
2742 "controller node\n");
2744 lpfc_register_new_vport(phba
, vport
, ndlp
);
2745 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2749 if (phba
->link_flag
& LS_NPIV_FAB_SUPPORTED
)
2750 lpfc_initial_fdisc(vport
);
2752 lpfc_vport_set_state(vport
, FC_VPORT_NO_FABRIC_SUPP
);
2753 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_ELS
,
2754 "2606 No NPIV Fabric support\n");
2756 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2761 * lpfc_issue_init_vpi - Issue init_vpi mailbox command.
2762 * @vport: pointer to lpfc_vport data structure.
2764 * This function issue a init_vpi mailbox command to initialize
2765 * VPI for the vport.
2768 lpfc_issue_init_vpi(struct lpfc_vport
*vport
)
2770 LPFC_MBOXQ_t
*mboxq
;
2773 mboxq
= mempool_alloc(vport
->phba
->mbox_mem_pool
, GFP_KERNEL
);
2775 lpfc_printf_vlog(vport
, KERN_ERR
,
2776 LOG_MBOX
, "2607 Failed to allocate "
2777 "init_vpi mailbox\n");
2780 lpfc_init_vpi(vport
->phba
, mboxq
, vport
->vpi
);
2781 mboxq
->vport
= vport
;
2782 mboxq
->mbox_cmpl
= lpfc_init_vpi_cmpl
;
2783 rc
= lpfc_sli_issue_mbox(vport
->phba
, mboxq
, MBX_NOWAIT
);
2784 if (rc
== MBX_NOT_FINISHED
) {
2785 lpfc_printf_vlog(vport
, KERN_ERR
,
2786 LOG_MBOX
, "2608 Failed to issue init_vpi mailbox\n");
2787 mempool_free(mboxq
, vport
->phba
->mbox_mem_pool
);
2792 * lpfc_start_fdiscs - send fdiscs for each vports on this port.
2793 * @phba: pointer to lpfc hba data structure.
2795 * This function loops through the list of vports on the @phba and issues an
2796 * FDISC if possible.
2799 lpfc_start_fdiscs(struct lpfc_hba
*phba
)
2801 struct lpfc_vport
**vports
;
2804 vports
= lpfc_create_vport_work_array(phba
);
2805 if (vports
!= NULL
) {
2806 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
2807 if (vports
[i
]->port_type
== LPFC_PHYSICAL_PORT
)
2809 /* There are no vpi for this vport */
2810 if (vports
[i
]->vpi
> phba
->max_vpi
) {
2811 lpfc_vport_set_state(vports
[i
],
2815 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
2816 lpfc_vport_set_state(vports
[i
],
2820 if (vports
[i
]->fc_flag
& FC_VPORT_NEEDS_INIT_VPI
) {
2821 lpfc_issue_init_vpi(vports
[i
]);
2824 if (phba
->link_flag
& LS_NPIV_FAB_SUPPORTED
)
2825 lpfc_initial_fdisc(vports
[i
]);
2827 lpfc_vport_set_state(vports
[i
],
2828 FC_VPORT_NO_FABRIC_SUPP
);
2829 lpfc_printf_vlog(vports
[i
], KERN_ERR
,
2832 "Fabric support\n");
2836 lpfc_destroy_vport_work_array(phba
, vports
);
2840 lpfc_mbx_cmpl_reg_vfi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
2842 struct lpfc_dmabuf
*dmabuf
= mboxq
->context1
;
2843 struct lpfc_vport
*vport
= mboxq
->vport
;
2844 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
2846 if (mboxq
->u
.mb
.mbxStatus
) {
2847 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
2848 "2018 REG_VFI mbxStatus error x%x "
2850 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
2851 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
2852 /* FLOGI failed, use loop map to make discovery list */
2853 lpfc_disc_list_loopmap(vport
);
2854 /* Start discovery */
2855 lpfc_disc_start(vport
);
2858 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
2861 /* The VPI is implicitly registered when the VFI is registered */
2862 spin_lock_irq(shost
->host_lock
);
2863 vport
->vpi_state
|= LPFC_VPI_REGISTERED
;
2864 vport
->fc_flag
|= FC_VFI_REGISTERED
;
2865 vport
->fc_flag
&= ~FC_VPORT_NEEDS_REG_VPI
;
2866 vport
->fc_flag
&= ~FC_VPORT_NEEDS_INIT_VPI
;
2867 spin_unlock_irq(shost
->host_lock
);
2869 /* In case SLI4 FC loopback test, we are ready */
2870 if ((phba
->sli_rev
== LPFC_SLI_REV4
) &&
2871 (phba
->link_flag
& LS_LOOPBACK_MODE
)) {
2872 phba
->link_state
= LPFC_HBA_READY
;
2876 if (vport
->port_state
== LPFC_FABRIC_CFG_LINK
) {
2877 /* For private loop just start discovery and we are done. */
2878 if ((phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) &&
2879 !(vport
->fc_flag
& FC_PUBLIC_LOOP
)) {
2880 /* Use loop map to make discovery list */
2881 lpfc_disc_list_loopmap(vport
);
2882 /* Start discovery */
2883 lpfc_disc_start(vport
);
2885 lpfc_start_fdiscs(phba
);
2886 lpfc_do_scr_ns_plogi(phba
, vport
);
2891 mempool_free(mboxq
, phba
->mbox_mem_pool
);
2892 lpfc_mbuf_free(phba
, dmabuf
->virt
, dmabuf
->phys
);
2898 lpfc_mbx_cmpl_read_sparam(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
2900 MAILBOX_t
*mb
= &pmb
->u
.mb
;
2901 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) pmb
->context1
;
2902 struct lpfc_vport
*vport
= pmb
->vport
;
2905 /* Check for error */
2906 if (mb
->mbxStatus
) {
2907 /* READ_SPARAM mbox error <mbxStatus> state <hba_state> */
2908 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
2909 "0319 READ_SPARAM mbxStatus error x%x "
2911 mb
->mbxStatus
, vport
->port_state
);
2912 lpfc_linkdown(phba
);
2916 memcpy((uint8_t *) &vport
->fc_sparam
, (uint8_t *) mp
->virt
,
2917 sizeof (struct serv_parm
));
2918 lpfc_update_vport_wwn(vport
);
2919 if (vport
->port_type
== LPFC_PHYSICAL_PORT
) {
2920 memcpy(&phba
->wwnn
, &vport
->fc_nodename
, sizeof(phba
->wwnn
));
2921 memcpy(&phba
->wwpn
, &vport
->fc_portname
, sizeof(phba
->wwnn
));
2924 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
2926 mempool_free(pmb
, phba
->mbox_mem_pool
);
2930 pmb
->context1
= NULL
;
2931 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
2933 lpfc_issue_clear_la(phba
, vport
);
2934 mempool_free(pmb
, phba
->mbox_mem_pool
);
2939 lpfc_mbx_process_link_up(struct lpfc_hba
*phba
, struct lpfc_mbx_read_top
*la
)
2941 struct lpfc_vport
*vport
= phba
->pport
;
2942 LPFC_MBOXQ_t
*sparam_mbox
, *cfglink_mbox
= NULL
;
2943 struct Scsi_Host
*shost
;
2945 struct lpfc_dmabuf
*mp
;
2947 struct fcf_record
*fcf_record
;
2949 spin_lock_irq(&phba
->hbalock
);
2950 switch (bf_get(lpfc_mbx_read_top_link_spd
, la
)) {
2951 case LPFC_LINK_SPEED_1GHZ
:
2952 case LPFC_LINK_SPEED_2GHZ
:
2953 case LPFC_LINK_SPEED_4GHZ
:
2954 case LPFC_LINK_SPEED_8GHZ
:
2955 case LPFC_LINK_SPEED_10GHZ
:
2956 case LPFC_LINK_SPEED_16GHZ
:
2957 phba
->fc_linkspeed
= bf_get(lpfc_mbx_read_top_link_spd
, la
);
2960 phba
->fc_linkspeed
= LPFC_LINK_SPEED_UNKNOWN
;
2964 phba
->fc_topology
= bf_get(lpfc_mbx_read_top_topology
, la
);
2965 phba
->link_flag
&= ~LS_NPIV_FAB_SUPPORTED
;
2967 shost
= lpfc_shost_from_vport(vport
);
2968 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
2969 phba
->sli3_options
&= ~LPFC_SLI3_NPIV_ENABLED
;
2971 /* if npiv is enabled and this adapter supports npiv log
2972 * a message that npiv is not supported in this topology
2974 if (phba
->cfg_enable_npiv
&& phba
->max_vpi
)
2975 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
2976 "1309 Link Up Event npiv not supported in loop "
2978 /* Get Loop Map information */
2979 if (bf_get(lpfc_mbx_read_top_il
, la
)) {
2980 spin_lock_irq(shost
->host_lock
);
2981 vport
->fc_flag
|= FC_LBIT
;
2982 spin_unlock_irq(shost
->host_lock
);
2985 vport
->fc_myDID
= bf_get(lpfc_mbx_read_top_alpa_granted
, la
);
2986 i
= la
->lilpBde64
.tus
.f
.bdeSize
;
2989 phba
->alpa_map
[0] = 0;
2991 if (vport
->cfg_log_verbose
& LOG_LINK_EVENT
) {
3002 numalpa
= phba
->alpa_map
[0];
3004 while (j
< numalpa
) {
3005 memset(un
.pamap
, 0, 16);
3006 for (k
= 1; j
< numalpa
; k
++) {
3008 phba
->alpa_map
[j
+ 1];
3013 /* Link Up Event ALPA map */
3014 lpfc_printf_log(phba
,
3017 "1304 Link Up Event "
3018 "ALPA map Data: x%x "
3020 un
.pa
.wd1
, un
.pa
.wd2
,
3021 un
.pa
.wd3
, un
.pa
.wd4
);
3026 if (!(phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
)) {
3027 if (phba
->max_vpi
&& phba
->cfg_enable_npiv
&&
3028 (phba
->sli_rev
>= LPFC_SLI_REV3
))
3029 phba
->sli3_options
|= LPFC_SLI3_NPIV_ENABLED
;
3031 vport
->fc_myDID
= phba
->fc_pref_DID
;
3032 spin_lock_irq(shost
->host_lock
);
3033 vport
->fc_flag
|= FC_LBIT
;
3034 spin_unlock_irq(shost
->host_lock
);
3036 spin_unlock_irq(&phba
->hbalock
);
3039 sparam_mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3043 rc
= lpfc_read_sparam(phba
, sparam_mbox
, 0);
3045 mempool_free(sparam_mbox
, phba
->mbox_mem_pool
);
3048 sparam_mbox
->vport
= vport
;
3049 sparam_mbox
->mbox_cmpl
= lpfc_mbx_cmpl_read_sparam
;
3050 rc
= lpfc_sli_issue_mbox(phba
, sparam_mbox
, MBX_NOWAIT
);
3051 if (rc
== MBX_NOT_FINISHED
) {
3052 mp
= (struct lpfc_dmabuf
*) sparam_mbox
->context1
;
3053 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3055 mempool_free(sparam_mbox
, phba
->mbox_mem_pool
);
3059 if (!(phba
->hba_flag
& HBA_FCOE_MODE
)) {
3060 cfglink_mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3063 vport
->port_state
= LPFC_LOCAL_CFG_LINK
;
3064 lpfc_config_link(phba
, cfglink_mbox
);
3065 cfglink_mbox
->vport
= vport
;
3066 cfglink_mbox
->mbox_cmpl
= lpfc_mbx_cmpl_local_config_link
;
3067 rc
= lpfc_sli_issue_mbox(phba
, cfglink_mbox
, MBX_NOWAIT
);
3068 if (rc
== MBX_NOT_FINISHED
) {
3069 mempool_free(cfglink_mbox
, phba
->mbox_mem_pool
);
3073 vport
->port_state
= LPFC_VPORT_UNKNOWN
;
3075 * Add the driver's default FCF record at FCF index 0 now. This
3076 * is phase 1 implementation that support FCF index 0 and driver
3079 if (!(phba
->hba_flag
& HBA_FIP_SUPPORT
)) {
3080 fcf_record
= kzalloc(sizeof(struct fcf_record
),
3082 if (unlikely(!fcf_record
)) {
3083 lpfc_printf_log(phba
, KERN_ERR
,
3085 "2554 Could not allocate memory for "
3091 lpfc_sli4_build_dflt_fcf_record(phba
, fcf_record
,
3092 LPFC_FCOE_FCF_DEF_INDEX
);
3093 rc
= lpfc_sli4_add_fcf_record(phba
, fcf_record
);
3095 lpfc_printf_log(phba
, KERN_ERR
,
3097 "2013 Could not manually add FCF "
3098 "record 0, status %d\n", rc
);
3106 * The driver is expected to do FIP/FCF. Call the port
3107 * and get the FCF Table.
3109 spin_lock_irq(&phba
->hbalock
);
3110 if (phba
->hba_flag
& FCF_TS_INPROG
) {
3111 spin_unlock_irq(&phba
->hbalock
);
3114 /* This is the initial FCF discovery scan */
3115 phba
->fcf
.fcf_flag
|= FCF_INIT_DISC
;
3116 spin_unlock_irq(&phba
->hbalock
);
3117 lpfc_printf_log(phba
, KERN_INFO
, LOG_FIP
| LOG_DISCOVERY
,
3118 "2778 Start FCF table scan at linkup\n");
3119 rc
= lpfc_sli4_fcf_scan_read_fcf_rec(phba
,
3120 LPFC_FCOE_FCF_GET_FIRST
);
3122 spin_lock_irq(&phba
->hbalock
);
3123 phba
->fcf
.fcf_flag
&= ~FCF_INIT_DISC
;
3124 spin_unlock_irq(&phba
->hbalock
);
3127 /* Reset FCF roundrobin bmask for new discovery */
3128 lpfc_sli4_clear_fcf_rr_bmask(phba
);
3133 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3134 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
3135 "0263 Discovery Mailbox error: state: 0x%x : %p %p\n",
3136 vport
->port_state
, sparam_mbox
, cfglink_mbox
);
3137 lpfc_issue_clear_la(phba
, vport
);
3142 lpfc_enable_la(struct lpfc_hba
*phba
)
3145 struct lpfc_sli
*psli
= &phba
->sli
;
3146 spin_lock_irq(&phba
->hbalock
);
3147 psli
->sli_flag
|= LPFC_PROCESS_LA
;
3148 if (phba
->sli_rev
<= LPFC_SLI_REV3
) {
3149 control
= readl(phba
->HCregaddr
);
3150 control
|= HC_LAINT_ENA
;
3151 writel(control
, phba
->HCregaddr
);
3152 readl(phba
->HCregaddr
); /* flush */
3154 spin_unlock_irq(&phba
->hbalock
);
3158 lpfc_mbx_issue_link_down(struct lpfc_hba
*phba
)
3160 lpfc_linkdown(phba
);
3161 lpfc_enable_la(phba
);
3162 lpfc_unregister_unused_fcf(phba
);
3163 /* turn on Link Attention interrupts - no CLEAR_LA needed */
3168 * This routine handles processing a READ_TOPOLOGY mailbox
3169 * command upon completion. It is setup in the LPFC_MBOXQ
3170 * as the completion routine when the command is
3171 * handed off to the SLI layer.
3174 lpfc_mbx_cmpl_read_topology(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3176 struct lpfc_vport
*vport
= pmb
->vport
;
3177 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3178 struct lpfc_mbx_read_top
*la
;
3179 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3180 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3182 /* Unblock ELS traffic */
3183 phba
->sli
.ring
[LPFC_ELS_RING
].flag
&= ~LPFC_STOP_IOCB_EVENT
;
3184 /* Check for error */
3185 if (mb
->mbxStatus
) {
3186 lpfc_printf_log(phba
, KERN_INFO
, LOG_LINK_EVENT
,
3187 "1307 READ_LA mbox error x%x state x%x\n",
3188 mb
->mbxStatus
, vport
->port_state
);
3189 lpfc_mbx_issue_link_down(phba
);
3190 phba
->link_state
= LPFC_HBA_ERROR
;
3191 goto lpfc_mbx_cmpl_read_topology_free_mbuf
;
3194 la
= (struct lpfc_mbx_read_top
*) &pmb
->u
.mb
.un
.varReadTop
;
3196 memcpy(&phba
->alpa_map
[0], mp
->virt
, 128);
3198 spin_lock_irq(shost
->host_lock
);
3199 if (bf_get(lpfc_mbx_read_top_pb
, la
))
3200 vport
->fc_flag
|= FC_BYPASSED_MODE
;
3202 vport
->fc_flag
&= ~FC_BYPASSED_MODE
;
3203 spin_unlock_irq(shost
->host_lock
);
3205 if ((phba
->fc_eventTag
< la
->eventTag
) ||
3206 (phba
->fc_eventTag
== la
->eventTag
)) {
3207 phba
->fc_stat
.LinkMultiEvent
++;
3208 if (bf_get(lpfc_mbx_read_top_att_type
, la
) == LPFC_ATT_LINK_UP
)
3209 if (phba
->fc_eventTag
!= 0)
3210 lpfc_linkdown(phba
);
3213 phba
->fc_eventTag
= la
->eventTag
;
3214 spin_lock_irq(&phba
->hbalock
);
3215 if (bf_get(lpfc_mbx_read_top_mm
, la
))
3216 phba
->sli
.sli_flag
|= LPFC_MENLO_MAINT
;
3218 phba
->sli
.sli_flag
&= ~LPFC_MENLO_MAINT
;
3219 spin_unlock_irq(&phba
->hbalock
);
3221 phba
->link_events
++;
3222 if ((bf_get(lpfc_mbx_read_top_att_type
, la
) == LPFC_ATT_LINK_UP
) &&
3223 (!bf_get(lpfc_mbx_read_top_mm
, la
))) {
3224 phba
->fc_stat
.LinkUp
++;
3225 if (phba
->link_flag
& LS_LOOPBACK_MODE
) {
3226 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3227 "1306 Link Up Event in loop back mode "
3228 "x%x received Data: x%x x%x x%x x%x\n",
3229 la
->eventTag
, phba
->fc_eventTag
,
3230 bf_get(lpfc_mbx_read_top_alpa_granted
,
3232 bf_get(lpfc_mbx_read_top_link_spd
, la
),
3235 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3236 "1303 Link Up Event x%x received "
3237 "Data: x%x x%x x%x x%x x%x x%x %d\n",
3238 la
->eventTag
, phba
->fc_eventTag
,
3239 bf_get(lpfc_mbx_read_top_alpa_granted
,
3241 bf_get(lpfc_mbx_read_top_link_spd
, la
),
3243 bf_get(lpfc_mbx_read_top_mm
, la
),
3244 bf_get(lpfc_mbx_read_top_fa
, la
),
3245 phba
->wait_4_mlo_maint_flg
);
3247 lpfc_mbx_process_link_up(phba
, la
);
3248 } else if (bf_get(lpfc_mbx_read_top_att_type
, la
) ==
3249 LPFC_ATT_LINK_DOWN
) {
3250 phba
->fc_stat
.LinkDown
++;
3251 if (phba
->link_flag
& LS_LOOPBACK_MODE
)
3252 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3253 "1308 Link Down Event in loop back mode "
3255 "Data: x%x x%x x%x\n",
3256 la
->eventTag
, phba
->fc_eventTag
,
3257 phba
->pport
->port_state
, vport
->fc_flag
);
3259 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3260 "1305 Link Down Event x%x received "
3261 "Data: x%x x%x x%x x%x x%x\n",
3262 la
->eventTag
, phba
->fc_eventTag
,
3263 phba
->pport
->port_state
, vport
->fc_flag
,
3264 bf_get(lpfc_mbx_read_top_mm
, la
),
3265 bf_get(lpfc_mbx_read_top_fa
, la
));
3266 lpfc_mbx_issue_link_down(phba
);
3268 if ((bf_get(lpfc_mbx_read_top_mm
, la
)) &&
3269 (bf_get(lpfc_mbx_read_top_att_type
, la
) == LPFC_ATT_LINK_UP
)) {
3270 if (phba
->link_state
!= LPFC_LINK_DOWN
) {
3271 phba
->fc_stat
.LinkDown
++;
3272 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3273 "1312 Link Down Event x%x received "
3274 "Data: x%x x%x x%x\n",
3275 la
->eventTag
, phba
->fc_eventTag
,
3276 phba
->pport
->port_state
, vport
->fc_flag
);
3277 lpfc_mbx_issue_link_down(phba
);
3279 lpfc_enable_la(phba
);
3281 lpfc_printf_log(phba
, KERN_ERR
, LOG_LINK_EVENT
,
3282 "1310 Menlo Maint Mode Link up Event x%x rcvd "
3283 "Data: x%x x%x x%x\n",
3284 la
->eventTag
, phba
->fc_eventTag
,
3285 phba
->pport
->port_state
, vport
->fc_flag
);
3287 * The cmnd that triggered this will be waiting for this
3290 /* WAKEUP for MENLO_SET_MODE or MENLO_RESET command. */
3291 if (phba
->wait_4_mlo_maint_flg
) {
3292 phba
->wait_4_mlo_maint_flg
= 0;
3293 wake_up_interruptible(&phba
->wait_4_mlo_m_q
);
3297 if (bf_get(lpfc_mbx_read_top_fa
, la
)) {
3298 if (bf_get(lpfc_mbx_read_top_mm
, la
))
3299 lpfc_issue_clear_la(phba
, vport
);
3300 lpfc_printf_log(phba
, KERN_INFO
, LOG_LINK_EVENT
,
3302 bf_get(lpfc_mbx_read_top_fa
, la
));
3305 lpfc_mbx_cmpl_read_topology_free_mbuf
:
3306 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3308 mempool_free(pmb
, phba
->mbox_mem_pool
);
3313 * This routine handles processing a REG_LOGIN mailbox
3314 * command upon completion. It is setup in the LPFC_MBOXQ
3315 * as the completion routine when the command is
3316 * handed off to the SLI layer.
3319 lpfc_mbx_cmpl_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3321 struct lpfc_vport
*vport
= pmb
->vport
;
3322 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3323 struct lpfc_nodelist
*ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
3324 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3326 pmb
->context1
= NULL
;
3327 pmb
->context2
= NULL
;
3329 if (ndlp
->nlp_flag
& NLP_REG_LOGIN_SEND
)
3330 ndlp
->nlp_flag
&= ~NLP_REG_LOGIN_SEND
;
3332 if (ndlp
->nlp_flag
& NLP_IGNR_REG_CMPL
||
3333 ndlp
->nlp_state
!= NLP_STE_REG_LOGIN_ISSUE
) {
3334 /* We rcvd a rscn after issuing this
3335 * mbox reg login, we may have cycled
3336 * back through the state and be
3337 * back at reg login state so this
3338 * mbox needs to be ignored becase
3339 * there is another reg login in
3342 spin_lock_irq(shost
->host_lock
);
3343 ndlp
->nlp_flag
&= ~NLP_IGNR_REG_CMPL
;
3344 spin_unlock_irq(shost
->host_lock
);
3346 /* Good status, call state machine */
3347 lpfc_disc_state_machine(vport
, ndlp
, pmb
,
3348 NLP_EVT_CMPL_REG_LOGIN
);
3350 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3352 mempool_free(pmb
, phba
->mbox_mem_pool
);
3353 /* decrement the node reference count held for this callback
3362 lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3364 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3365 struct lpfc_vport
*vport
= pmb
->vport
;
3366 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3368 switch (mb
->mbxStatus
) {
3371 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
3372 "0911 cmpl_unreg_vpi, mb status = 0x%x\n",
3375 /* If VPI is busy, reset the HBA */
3377 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_NODE
,
3378 "2798 Unreg_vpi failed vpi 0x%x, mb status = 0x%x\n",
3379 vport
->vpi
, mb
->mbxStatus
);
3380 if (!(phba
->pport
->load_flag
& FC_UNLOADING
))
3381 lpfc_workq_post_event(phba
, NULL
, NULL
,
3382 LPFC_EVT_RESET_HBA
);
3384 spin_lock_irq(shost
->host_lock
);
3385 vport
->vpi_state
&= ~LPFC_VPI_REGISTERED
;
3386 vport
->fc_flag
|= FC_VPORT_NEEDS_REG_VPI
;
3387 spin_unlock_irq(shost
->host_lock
);
3388 vport
->unreg_vpi_cmpl
= VPORT_OK
;
3389 mempool_free(pmb
, phba
->mbox_mem_pool
);
3390 lpfc_cleanup_vports_rrqs(vport
, NULL
);
3392 * This shost reference might have been taken at the beginning of
3393 * lpfc_vport_delete()
3395 if ((vport
->load_flag
& FC_UNLOADING
) && (vport
!= phba
->pport
))
3396 scsi_host_put(shost
);
3400 lpfc_mbx_unreg_vpi(struct lpfc_vport
*vport
)
3402 struct lpfc_hba
*phba
= vport
->phba
;
3406 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3410 lpfc_unreg_vpi(phba
, vport
->vpi
, mbox
);
3411 mbox
->vport
= vport
;
3412 mbox
->mbox_cmpl
= lpfc_mbx_cmpl_unreg_vpi
;
3413 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
3414 if (rc
== MBX_NOT_FINISHED
) {
3415 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
| LOG_VPORT
,
3416 "1800 Could not issue unreg_vpi\n");
3417 mempool_free(mbox
, phba
->mbox_mem_pool
);
3418 vport
->unreg_vpi_cmpl
= VPORT_ERROR
;
3425 lpfc_mbx_cmpl_reg_vpi(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3427 struct lpfc_vport
*vport
= pmb
->vport
;
3428 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3429 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3431 switch (mb
->mbxStatus
) {
3435 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
3436 "0912 cmpl_reg_vpi, mb status = 0x%x\n",
3438 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3439 spin_lock_irq(shost
->host_lock
);
3440 vport
->fc_flag
&= ~(FC_FABRIC
| FC_PUBLIC_LOOP
);
3441 spin_unlock_irq(shost
->host_lock
);
3442 vport
->fc_myDID
= 0;
3446 spin_lock_irq(shost
->host_lock
);
3447 vport
->vpi_state
|= LPFC_VPI_REGISTERED
;
3448 vport
->fc_flag
&= ~FC_VPORT_NEEDS_REG_VPI
;
3449 spin_unlock_irq(shost
->host_lock
);
3450 vport
->num_disc_nodes
= 0;
3451 /* go thru NPR list and issue ELS PLOGIs */
3452 if (vport
->fc_npr_cnt
)
3453 lpfc_els_disc_plogi(vport
);
3455 if (!vport
->num_disc_nodes
) {
3456 spin_lock_irq(shost
->host_lock
);
3457 vport
->fc_flag
&= ~FC_NDISC_ACTIVE
;
3458 spin_unlock_irq(shost
->host_lock
);
3459 lpfc_can_disctmo(vport
);
3461 vport
->port_state
= LPFC_VPORT_READY
;
3464 mempool_free(pmb
, phba
->mbox_mem_pool
);
3469 * lpfc_create_static_vport - Read HBA config region to create static vports.
3470 * @phba: pointer to lpfc hba data structure.
3472 * This routine issue a DUMP mailbox command for config region 22 to get
3473 * the list of static vports to be created. The function create vports
3474 * based on the information returned from the HBA.
3477 lpfc_create_static_vport(struct lpfc_hba
*phba
)
3479 LPFC_MBOXQ_t
*pmb
= NULL
;
3481 struct static_vport_info
*vport_info
;
3483 struct fc_vport_identifiers vport_id
;
3484 struct fc_vport
*new_fc_vport
;
3485 struct Scsi_Host
*shost
;
3486 struct lpfc_vport
*vport
;
3487 uint16_t offset
= 0;
3488 uint8_t *vport_buff
;
3489 struct lpfc_dmabuf
*mp
;
3490 uint32_t byte_count
= 0;
3492 pmb
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
3494 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3495 "0542 lpfc_create_static_vport failed to"
3496 " allocate mailbox memory\n");
3502 vport_info
= kzalloc(sizeof(struct static_vport_info
), GFP_KERNEL
);
3504 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3505 "0543 lpfc_create_static_vport failed to"
3506 " allocate vport_info\n");
3507 mempool_free(pmb
, phba
->mbox_mem_pool
);
3511 vport_buff
= (uint8_t *) vport_info
;
3513 if (lpfc_dump_static_vport(phba
, pmb
, offset
))
3516 pmb
->vport
= phba
->pport
;
3517 rc
= lpfc_sli_issue_mbox_wait(phba
, pmb
, LPFC_MBOX_TMO
);
3519 if ((rc
!= MBX_SUCCESS
) || mb
->mbxStatus
) {
3520 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
3521 "0544 lpfc_create_static_vport failed to"
3522 " issue dump mailbox command ret 0x%x "
3528 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
3529 byte_count
= pmb
->u
.mqe
.un
.mb_words
[5];
3530 mp
= (struct lpfc_dmabuf
*) pmb
->context2
;
3531 if (byte_count
> sizeof(struct static_vport_info
) -
3533 byte_count
= sizeof(struct static_vport_info
)
3535 memcpy(vport_buff
+ offset
, mp
->virt
, byte_count
);
3536 offset
+= byte_count
;
3538 if (mb
->un
.varDmp
.word_cnt
>
3539 sizeof(struct static_vport_info
) - offset
)
3540 mb
->un
.varDmp
.word_cnt
=
3541 sizeof(struct static_vport_info
)
3543 byte_count
= mb
->un
.varDmp
.word_cnt
;
3544 lpfc_sli_pcimem_bcopy(((uint8_t *)mb
) + DMP_RSP_OFFSET
,
3545 vport_buff
+ offset
,
3548 offset
+= byte_count
;
3551 } while (byte_count
&&
3552 offset
< sizeof(struct static_vport_info
));
3555 if ((le32_to_cpu(vport_info
->signature
) != VPORT_INFO_SIG
) ||
3556 ((le32_to_cpu(vport_info
->rev
) & VPORT_INFO_REV_MASK
)
3557 != VPORT_INFO_REV
)) {
3558 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
3559 "0545 lpfc_create_static_vport bad"
3560 " information header 0x%x 0x%x\n",
3561 le32_to_cpu(vport_info
->signature
),
3562 le32_to_cpu(vport_info
->rev
) & VPORT_INFO_REV_MASK
);
3567 shost
= lpfc_shost_from_vport(phba
->pport
);
3569 for (i
= 0; i
< MAX_STATIC_VPORT_COUNT
; i
++) {
3570 memset(&vport_id
, 0, sizeof(vport_id
));
3571 vport_id
.port_name
= wwn_to_u64(vport_info
->vport_list
[i
].wwpn
);
3572 vport_id
.node_name
= wwn_to_u64(vport_info
->vport_list
[i
].wwnn
);
3573 if (!vport_id
.port_name
|| !vport_id
.node_name
)
3576 vport_id
.roles
= FC_PORT_ROLE_FCP_INITIATOR
;
3577 vport_id
.vport_type
= FC_PORTTYPE_NPIV
;
3578 vport_id
.disable
= false;
3579 new_fc_vport
= fc_vport_create(shost
, 0, &vport_id
);
3581 if (!new_fc_vport
) {
3582 lpfc_printf_log(phba
, KERN_WARNING
, LOG_INIT
,
3583 "0546 lpfc_create_static_vport failed to"
3588 vport
= *(struct lpfc_vport
**)new_fc_vport
->dd_data
;
3589 vport
->vport_flag
|= STATIC_VPORT
;
3594 if (rc
!= MBX_TIMEOUT
) {
3595 if (pmb
->context2
) {
3596 mp
= (struct lpfc_dmabuf
*) pmb
->context2
;
3597 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3600 mempool_free(pmb
, phba
->mbox_mem_pool
);
3607 * This routine handles processing a Fabric REG_LOGIN mailbox
3608 * command upon completion. It is setup in the LPFC_MBOXQ
3609 * as the completion routine when the command is
3610 * handed off to the SLI layer.
3613 lpfc_mbx_cmpl_fabric_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3615 struct lpfc_vport
*vport
= pmb
->vport
;
3616 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3617 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3618 struct lpfc_nodelist
*ndlp
;
3619 struct Scsi_Host
*shost
;
3621 ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
3622 pmb
->context1
= NULL
;
3623 pmb
->context2
= NULL
;
3625 if (mb
->mbxStatus
) {
3626 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
,
3627 "0258 Register Fabric login error: 0x%x\n",
3629 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3631 mempool_free(pmb
, phba
->mbox_mem_pool
);
3633 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
3634 /* FLOGI failed, use loop map to make discovery list */
3635 lpfc_disc_list_loopmap(vport
);
3637 /* Start discovery */
3638 lpfc_disc_start(vport
);
3639 /* Decrement the reference count to ndlp after the
3640 * reference to the ndlp are done.
3646 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3647 /* Decrement the reference count to ndlp after the reference
3648 * to the ndlp are done.
3654 if (phba
->sli_rev
< LPFC_SLI_REV4
)
3655 ndlp
->nlp_rpi
= mb
->un
.varWords
[0];
3656 ndlp
->nlp_flag
|= NLP_RPI_REGISTERED
;
3657 ndlp
->nlp_type
|= NLP_FABRIC
;
3658 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
3660 if (vport
->port_state
== LPFC_FABRIC_CFG_LINK
) {
3661 /* when physical port receive logo donot start
3662 * vport discovery */
3663 if (!(vport
->fc_flag
& FC_LOGO_RCVD_DID_CHNG
))
3664 lpfc_start_fdiscs(phba
);
3666 shost
= lpfc_shost_from_vport(vport
);
3667 spin_lock_irq(shost
->host_lock
);
3668 vport
->fc_flag
&= ~FC_LOGO_RCVD_DID_CHNG
;
3669 spin_unlock_irq(shost
->host_lock
);
3671 lpfc_do_scr_ns_plogi(phba
, vport
);
3674 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3676 mempool_free(pmb
, phba
->mbox_mem_pool
);
3678 /* Drop the reference count from the mbox at the end after
3679 * all the current reference to the ndlp have been done.
3686 * This routine handles processing a NameServer REG_LOGIN mailbox
3687 * command upon completion. It is setup in the LPFC_MBOXQ
3688 * as the completion routine when the command is
3689 * handed off to the SLI layer.
3692 lpfc_mbx_cmpl_ns_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
3694 MAILBOX_t
*mb
= &pmb
->u
.mb
;
3695 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
3696 struct lpfc_nodelist
*ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
3697 struct lpfc_vport
*vport
= pmb
->vport
;
3699 pmb
->context1
= NULL
;
3700 pmb
->context2
= NULL
;
3702 if (mb
->mbxStatus
) {
3704 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_ELS
,
3705 "0260 Register NameServer error: 0x%x\n",
3707 /* decrement the node reference count held for this
3708 * callback function.
3711 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3713 mempool_free(pmb
, phba
->mbox_mem_pool
);
3715 /* If no other thread is using the ndlp, free it */
3716 lpfc_nlp_not_used(ndlp
);
3718 if (phba
->fc_topology
== LPFC_TOPOLOGY_LOOP
) {
3720 * RegLogin failed, use loop map to make discovery
3723 lpfc_disc_list_loopmap(vport
);
3725 /* Start discovery */
3726 lpfc_disc_start(vport
);
3729 lpfc_vport_set_state(vport
, FC_VPORT_FAILED
);
3733 if (phba
->sli_rev
< LPFC_SLI_REV4
)
3734 ndlp
->nlp_rpi
= mb
->un
.varWords
[0];
3735 ndlp
->nlp_flag
|= NLP_RPI_REGISTERED
;
3736 ndlp
->nlp_type
|= NLP_FABRIC
;
3737 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
3739 if (vport
->port_state
< LPFC_VPORT_READY
) {
3740 /* Link up discovery requires Fabric registration. */
3741 lpfc_ns_cmd(vport
, SLI_CTNS_RFF_ID
, 0, 0); /* Do this first! */
3742 lpfc_ns_cmd(vport
, SLI_CTNS_RNN_ID
, 0, 0);
3743 lpfc_ns_cmd(vport
, SLI_CTNS_RSNN_NN
, 0, 0);
3744 lpfc_ns_cmd(vport
, SLI_CTNS_RSPN_ID
, 0, 0);
3745 lpfc_ns_cmd(vport
, SLI_CTNS_RFT_ID
, 0, 0);
3747 /* Issue SCR just before NameServer GID_FT Query */
3748 lpfc_issue_els_scr(vport
, SCR_DID
, 0);
3751 vport
->fc_ns_retry
= 0;
3752 /* Good status, issue CT Request to NameServer */
3753 if (lpfc_ns_cmd(vport
, SLI_CTNS_GID_FT
, 0, 0)) {
3754 /* Cannot issue NameServer Query, so finish up discovery */
3758 /* decrement the node reference count held for this
3759 * callback function.
3762 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
3764 mempool_free(pmb
, phba
->mbox_mem_pool
);
3770 lpfc_register_remote_port(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
3772 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3773 struct fc_rport
*rport
;
3774 struct lpfc_rport_data
*rdata
;
3775 struct fc_rport_identifiers rport_ids
;
3776 struct lpfc_hba
*phba
= vport
->phba
;
3778 /* Remote port has reappeared. Re-register w/ FC transport */
3779 rport_ids
.node_name
= wwn_to_u64(ndlp
->nlp_nodename
.u
.wwn
);
3780 rport_ids
.port_name
= wwn_to_u64(ndlp
->nlp_portname
.u
.wwn
);
3781 rport_ids
.port_id
= ndlp
->nlp_DID
;
3782 rport_ids
.roles
= FC_RPORT_ROLE_UNKNOWN
;
3785 * We leave our node pointer in rport->dd_data when we unregister a
3786 * FCP target port. But fc_remote_port_add zeros the space to which
3787 * rport->dd_data points. So, if we're reusing a previously
3788 * registered port, drop the reference that we took the last time we
3789 * registered the port.
3791 if (ndlp
->rport
&& ndlp
->rport
->dd_data
&&
3792 ((struct lpfc_rport_data
*) ndlp
->rport
->dd_data
)->pnode
== ndlp
)
3795 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_RPORT
,
3796 "rport add: did:x%x flg:x%x type x%x",
3797 ndlp
->nlp_DID
, ndlp
->nlp_flag
, ndlp
->nlp_type
);
3799 /* Don't add the remote port if unloading. */
3800 if (vport
->load_flag
& FC_UNLOADING
)
3803 ndlp
->rport
= rport
= fc_remote_port_add(shost
, 0, &rport_ids
);
3804 if (!rport
|| !get_device(&rport
->dev
)) {
3805 dev_printk(KERN_WARNING
, &phba
->pcidev
->dev
,
3806 "Warning: fc_remote_port_add failed\n");
3810 /* initialize static port data */
3811 rport
->maxframe_size
= ndlp
->nlp_maxframe
;
3812 rport
->supported_classes
= ndlp
->nlp_class_sup
;
3813 rdata
= rport
->dd_data
;
3814 rdata
->pnode
= lpfc_nlp_get(ndlp
);
3816 if (ndlp
->nlp_type
& NLP_FCP_TARGET
)
3817 rport_ids
.roles
|= FC_RPORT_ROLE_FCP_TARGET
;
3818 if (ndlp
->nlp_type
& NLP_FCP_INITIATOR
)
3819 rport_ids
.roles
|= FC_RPORT_ROLE_FCP_INITIATOR
;
3821 if (rport_ids
.roles
!= FC_RPORT_ROLE_UNKNOWN
)
3822 fc_remote_port_rolechg(rport
, rport_ids
.roles
);
3824 if ((rport
->scsi_target_id
!= -1) &&
3825 (rport
->scsi_target_id
< LPFC_MAX_TARGET
)) {
3826 ndlp
->nlp_sid
= rport
->scsi_target_id
;
3832 lpfc_unregister_remote_port(struct lpfc_nodelist
*ndlp
)
3834 struct fc_rport
*rport
= ndlp
->rport
;
3836 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_RPORT
,
3837 "rport delete: did:x%x flg:x%x type x%x",
3838 ndlp
->nlp_DID
, ndlp
->nlp_flag
, ndlp
->nlp_type
);
3840 fc_remote_port_delete(rport
);
3846 lpfc_nlp_counters(struct lpfc_vport
*vport
, int state
, int count
)
3848 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3850 spin_lock_irq(shost
->host_lock
);
3852 case NLP_STE_UNUSED_NODE
:
3853 vport
->fc_unused_cnt
+= count
;
3855 case NLP_STE_PLOGI_ISSUE
:
3856 vport
->fc_plogi_cnt
+= count
;
3858 case NLP_STE_ADISC_ISSUE
:
3859 vport
->fc_adisc_cnt
+= count
;
3861 case NLP_STE_REG_LOGIN_ISSUE
:
3862 vport
->fc_reglogin_cnt
+= count
;
3864 case NLP_STE_PRLI_ISSUE
:
3865 vport
->fc_prli_cnt
+= count
;
3867 case NLP_STE_UNMAPPED_NODE
:
3868 vport
->fc_unmap_cnt
+= count
;
3870 case NLP_STE_MAPPED_NODE
:
3871 vport
->fc_map_cnt
+= count
;
3873 case NLP_STE_NPR_NODE
:
3874 vport
->fc_npr_cnt
+= count
;
3877 spin_unlock_irq(shost
->host_lock
);
3881 lpfc_nlp_state_cleanup(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
3882 int old_state
, int new_state
)
3884 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3886 if (new_state
== NLP_STE_UNMAPPED_NODE
) {
3887 ndlp
->nlp_flag
&= ~NLP_NODEV_REMOVE
;
3888 ndlp
->nlp_type
|= NLP_FC_NODE
;
3890 if (new_state
== NLP_STE_MAPPED_NODE
)
3891 ndlp
->nlp_flag
&= ~NLP_NODEV_REMOVE
;
3892 if (new_state
== NLP_STE_NPR_NODE
)
3893 ndlp
->nlp_flag
&= ~NLP_RCV_PLOGI
;
3895 /* Transport interface */
3896 if (ndlp
->rport
&& (old_state
== NLP_STE_MAPPED_NODE
||
3897 old_state
== NLP_STE_UNMAPPED_NODE
)) {
3898 vport
->phba
->nport_event_cnt
++;
3899 lpfc_unregister_remote_port(ndlp
);
3902 if (new_state
== NLP_STE_MAPPED_NODE
||
3903 new_state
== NLP_STE_UNMAPPED_NODE
) {
3904 vport
->phba
->nport_event_cnt
++;
3906 * Tell the fc transport about the port, if we haven't
3907 * already. If we have, and it's a scsi entity, be
3908 * sure to unblock any attached scsi devices
3910 lpfc_register_remote_port(vport
, ndlp
);
3912 if ((new_state
== NLP_STE_MAPPED_NODE
) &&
3913 (vport
->stat_data_enabled
)) {
3915 * A new target is discovered, if there is no buffer for
3916 * statistical data collection allocate buffer.
3918 ndlp
->lat_data
= kcalloc(LPFC_MAX_BUCKET_COUNT
,
3919 sizeof(struct lpfc_scsicmd_bkt
),
3922 if (!ndlp
->lat_data
)
3923 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_NODE
,
3924 "0286 lpfc_nlp_state_cleanup failed to "
3925 "allocate statistical data buffer DID "
3926 "0x%x\n", ndlp
->nlp_DID
);
3929 * if we added to Mapped list, but the remote port
3930 * registration failed or assigned a target id outside
3931 * our presentable range - move the node to the
3934 if (new_state
== NLP_STE_MAPPED_NODE
&&
3936 ndlp
->rport
->scsi_target_id
== -1 ||
3937 ndlp
->rport
->scsi_target_id
>= LPFC_MAX_TARGET
)) {
3938 spin_lock_irq(shost
->host_lock
);
3939 ndlp
->nlp_flag
|= NLP_TGT_NO_SCSIID
;
3940 spin_unlock_irq(shost
->host_lock
);
3941 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
3946 lpfc_nlp_state_name(char *buffer
, size_t size
, int state
)
3948 static char *states
[] = {
3949 [NLP_STE_UNUSED_NODE
] = "UNUSED",
3950 [NLP_STE_PLOGI_ISSUE
] = "PLOGI",
3951 [NLP_STE_ADISC_ISSUE
] = "ADISC",
3952 [NLP_STE_REG_LOGIN_ISSUE
] = "REGLOGIN",
3953 [NLP_STE_PRLI_ISSUE
] = "PRLI",
3954 [NLP_STE_UNMAPPED_NODE
] = "UNMAPPED",
3955 [NLP_STE_MAPPED_NODE
] = "MAPPED",
3956 [NLP_STE_NPR_NODE
] = "NPR",
3959 if (state
< NLP_STE_MAX_STATE
&& states
[state
])
3960 strlcpy(buffer
, states
[state
], size
);
3962 snprintf(buffer
, size
, "unknown (%d)", state
);
3967 lpfc_nlp_set_state(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
3970 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
3971 int old_state
= ndlp
->nlp_state
;
3972 char name1
[16], name2
[16];
3974 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
3975 "0904 NPort state transition x%06x, %s -> %s\n",
3977 lpfc_nlp_state_name(name1
, sizeof(name1
), old_state
),
3978 lpfc_nlp_state_name(name2
, sizeof(name2
), state
));
3980 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_NODE
,
3981 "node statechg did:x%x old:%d ste:%d",
3982 ndlp
->nlp_DID
, old_state
, state
);
3984 if (old_state
== NLP_STE_NPR_NODE
&&
3985 state
!= NLP_STE_NPR_NODE
)
3986 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
3987 if (old_state
== NLP_STE_UNMAPPED_NODE
) {
3988 ndlp
->nlp_flag
&= ~NLP_TGT_NO_SCSIID
;
3989 ndlp
->nlp_type
&= ~NLP_FC_NODE
;
3992 if (list_empty(&ndlp
->nlp_listp
)) {
3993 spin_lock_irq(shost
->host_lock
);
3994 list_add_tail(&ndlp
->nlp_listp
, &vport
->fc_nodes
);
3995 spin_unlock_irq(shost
->host_lock
);
3996 } else if (old_state
)
3997 lpfc_nlp_counters(vport
, old_state
, -1);
3999 ndlp
->nlp_state
= state
;
4000 lpfc_nlp_counters(vport
, state
, 1);
4001 lpfc_nlp_state_cleanup(vport
, ndlp
, old_state
, state
);
4005 lpfc_enqueue_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4007 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4009 if (list_empty(&ndlp
->nlp_listp
)) {
4010 spin_lock_irq(shost
->host_lock
);
4011 list_add_tail(&ndlp
->nlp_listp
, &vport
->fc_nodes
);
4012 spin_unlock_irq(shost
->host_lock
);
4017 lpfc_dequeue_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4019 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4021 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
4022 if (ndlp
->nlp_state
&& !list_empty(&ndlp
->nlp_listp
))
4023 lpfc_nlp_counters(vport
, ndlp
->nlp_state
, -1);
4024 spin_lock_irq(shost
->host_lock
);
4025 list_del_init(&ndlp
->nlp_listp
);
4026 spin_unlock_irq(shost
->host_lock
);
4027 lpfc_nlp_state_cleanup(vport
, ndlp
, ndlp
->nlp_state
,
4028 NLP_STE_UNUSED_NODE
);
4032 lpfc_disable_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4034 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
4035 if (ndlp
->nlp_state
&& !list_empty(&ndlp
->nlp_listp
))
4036 lpfc_nlp_counters(vport
, ndlp
->nlp_state
, -1);
4037 lpfc_nlp_state_cleanup(vport
, ndlp
, ndlp
->nlp_state
,
4038 NLP_STE_UNUSED_NODE
);
4041 * lpfc_initialize_node - Initialize all fields of node object
4042 * @vport: Pointer to Virtual Port object.
4043 * @ndlp: Pointer to FC node object.
4044 * @did: FC_ID of the node.
4046 * This function is always called when node object need to be initialized.
4047 * It initializes all the fields of the node object. Although the reference
4048 * to phba from @ndlp can be obtained indirectly through it's reference to
4049 * @vport, a direct reference to phba is taken here by @ndlp. This is due
4050 * to the life-span of the @ndlp might go beyond the existence of @vport as
4051 * the final release of ndlp is determined by its reference count. And, the
4052 * operation on @ndlp needs the reference to phba.
4055 lpfc_initialize_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
4058 INIT_LIST_HEAD(&ndlp
->els_retry_evt
.evt_listp
);
4059 INIT_LIST_HEAD(&ndlp
->dev_loss_evt
.evt_listp
);
4060 init_timer(&ndlp
->nlp_delayfunc
);
4061 ndlp
->nlp_delayfunc
.function
= lpfc_els_retry_delay
;
4062 ndlp
->nlp_delayfunc
.data
= (unsigned long)ndlp
;
4063 ndlp
->nlp_DID
= did
;
4064 ndlp
->vport
= vport
;
4065 ndlp
->phba
= vport
->phba
;
4066 ndlp
->nlp_sid
= NLP_NO_SID
;
4067 kref_init(&ndlp
->kref
);
4068 NLP_INT_NODE_ACT(ndlp
);
4069 atomic_set(&ndlp
->cmd_pending
, 0);
4070 ndlp
->cmd_qdepth
= vport
->cfg_tgt_queue_depth
;
4071 if (vport
->phba
->sli_rev
== LPFC_SLI_REV4
)
4072 ndlp
->nlp_rpi
= lpfc_sli4_alloc_rpi(vport
->phba
);
4075 struct lpfc_nodelist
*
4076 lpfc_enable_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
4079 struct lpfc_hba
*phba
= vport
->phba
;
4081 unsigned long flags
;
4086 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
4087 /* The ndlp should not be in memory free mode */
4088 if (NLP_CHK_FREE_REQ(ndlp
)) {
4089 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
4090 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4091 "0277 lpfc_enable_node: ndlp:x%p "
4092 "usgmap:x%x refcnt:%d\n",
4093 (void *)ndlp
, ndlp
->nlp_usg_map
,
4094 atomic_read(&ndlp
->kref
.refcount
));
4097 /* The ndlp should not already be in active mode */
4098 if (NLP_CHK_NODE_ACT(ndlp
)) {
4099 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
4100 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4101 "0278 lpfc_enable_node: ndlp:x%p "
4102 "usgmap:x%x refcnt:%d\n",
4103 (void *)ndlp
, ndlp
->nlp_usg_map
,
4104 atomic_read(&ndlp
->kref
.refcount
));
4108 /* Keep the original DID */
4109 did
= ndlp
->nlp_DID
;
4111 /* re-initialize ndlp except of ndlp linked list pointer */
4112 memset((((char *)ndlp
) + sizeof (struct list_head
)), 0,
4113 sizeof (struct lpfc_nodelist
) - sizeof (struct list_head
));
4114 lpfc_initialize_node(vport
, ndlp
, did
);
4116 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
4118 if (state
!= NLP_STE_UNUSED_NODE
)
4119 lpfc_nlp_set_state(vport
, ndlp
, state
);
4121 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_NODE
,
4122 "node enable: did:x%x",
4123 ndlp
->nlp_DID
, 0, 0);
4128 lpfc_drop_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4131 * Use of lpfc_drop_node and UNUSED list: lpfc_drop_node should
4132 * be used if we wish to issue the "last" lpfc_nlp_put() to remove
4133 * the ndlp from the vport. The ndlp marked as UNUSED on the list
4134 * until ALL other outstanding threads have completed. We check
4135 * that the ndlp not already in the UNUSED state before we proceed.
4137 if (ndlp
->nlp_state
== NLP_STE_UNUSED_NODE
)
4139 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNUSED_NODE
);
4140 if (vport
->phba
->sli_rev
== LPFC_SLI_REV4
)
4141 lpfc_cleanup_vports_rrqs(vport
, ndlp
);
4147 * Start / ReStart rescue timer for Discovery / RSCN handling
4150 lpfc_set_disctmo(struct lpfc_vport
*vport
)
4152 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4153 struct lpfc_hba
*phba
= vport
->phba
;
4156 if (vport
->port_state
== LPFC_LOCAL_CFG_LINK
) {
4157 /* For FAN, timeout should be greater than edtov */
4158 tmo
= (((phba
->fc_edtov
+ 999) / 1000) + 1);
4160 /* Normal discovery timeout should be > than ELS/CT timeout
4161 * FC spec states we need 3 * ratov for CT requests
4163 tmo
= ((phba
->fc_ratov
* 3) + 3);
4167 if (!timer_pending(&vport
->fc_disctmo
)) {
4168 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
4169 "set disc timer: tmo:x%x state:x%x flg:x%x",
4170 tmo
, vport
->port_state
, vport
->fc_flag
);
4173 mod_timer(&vport
->fc_disctmo
, jiffies
+ HZ
* tmo
);
4174 spin_lock_irq(shost
->host_lock
);
4175 vport
->fc_flag
|= FC_DISC_TMO
;
4176 spin_unlock_irq(shost
->host_lock
);
4178 /* Start Discovery Timer state <hba_state> */
4179 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
4180 "0247 Start Discovery Timer state x%x "
4181 "Data: x%x x%lx x%x x%x\n",
4182 vport
->port_state
, tmo
,
4183 (unsigned long)&vport
->fc_disctmo
, vport
->fc_plogi_cnt
,
4184 vport
->fc_adisc_cnt
);
4190 * Cancel rescue timer for Discovery / RSCN handling
4193 lpfc_can_disctmo(struct lpfc_vport
*vport
)
4195 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4196 unsigned long iflags
;
4198 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
4199 "can disc timer: state:x%x rtry:x%x flg:x%x",
4200 vport
->port_state
, vport
->fc_ns_retry
, vport
->fc_flag
);
4202 /* Turn off discovery timer if its running */
4203 if (vport
->fc_flag
& FC_DISC_TMO
) {
4204 spin_lock_irqsave(shost
->host_lock
, iflags
);
4205 vport
->fc_flag
&= ~FC_DISC_TMO
;
4206 spin_unlock_irqrestore(shost
->host_lock
, iflags
);
4207 del_timer_sync(&vport
->fc_disctmo
);
4208 spin_lock_irqsave(&vport
->work_port_lock
, iflags
);
4209 vport
->work_port_events
&= ~WORKER_DISC_TMO
;
4210 spin_unlock_irqrestore(&vport
->work_port_lock
, iflags
);
4213 /* Cancel Discovery Timer state <hba_state> */
4214 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
4215 "0248 Cancel Discovery Timer state x%x "
4216 "Data: x%x x%x x%x\n",
4217 vport
->port_state
, vport
->fc_flag
,
4218 vport
->fc_plogi_cnt
, vport
->fc_adisc_cnt
);
4223 * Check specified ring for outstanding IOCB on the SLI queue
4224 * Return true if iocb matches the specified nport
4227 lpfc_check_sli_ndlp(struct lpfc_hba
*phba
,
4228 struct lpfc_sli_ring
*pring
,
4229 struct lpfc_iocbq
*iocb
,
4230 struct lpfc_nodelist
*ndlp
)
4232 struct lpfc_sli
*psli
= &phba
->sli
;
4233 IOCB_t
*icmd
= &iocb
->iocb
;
4234 struct lpfc_vport
*vport
= ndlp
->vport
;
4236 if (iocb
->vport
!= vport
)
4239 if (pring
->ringno
== LPFC_ELS_RING
) {
4240 switch (icmd
->ulpCommand
) {
4241 case CMD_GEN_REQUEST64_CR
:
4242 if (iocb
->context_un
.ndlp
== ndlp
)
4244 case CMD_ELS_REQUEST64_CR
:
4245 if (icmd
->un
.elsreq64
.remoteID
== ndlp
->nlp_DID
)
4247 case CMD_XMIT_ELS_RSP64_CX
:
4248 if (iocb
->context1
== (uint8_t *) ndlp
)
4251 } else if (pring
->ringno
== psli
->extra_ring
) {
4253 } else if (pring
->ringno
== psli
->fcp_ring
) {
4254 /* Skip match check if waiting to relogin to FCP target */
4255 if ((ndlp
->nlp_type
& NLP_FCP_TARGET
) &&
4256 (ndlp
->nlp_flag
& NLP_DELAY_TMO
)) {
4259 if (icmd
->ulpContext
== (volatile ushort
)ndlp
->nlp_rpi
) {
4262 } else if (pring
->ringno
== psli
->next_ring
) {
4269 * Free resources / clean up outstanding I/Os
4270 * associated with nlp_rpi in the LPFC_NODELIST entry.
4273 lpfc_no_rpi(struct lpfc_hba
*phba
, struct lpfc_nodelist
*ndlp
)
4275 LIST_HEAD(completions
);
4276 struct lpfc_sli
*psli
;
4277 struct lpfc_sli_ring
*pring
;
4278 struct lpfc_iocbq
*iocb
, *next_iocb
;
4281 lpfc_fabric_abort_nport(ndlp
);
4284 * Everything that matches on txcmplq will be returned
4285 * by firmware with a no rpi error.
4288 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
) {
4289 /* Now process each ring */
4290 for (i
= 0; i
< psli
->num_rings
; i
++) {
4291 pring
= &psli
->ring
[i
];
4293 spin_lock_irq(&phba
->hbalock
);
4294 list_for_each_entry_safe(iocb
, next_iocb
, &pring
->txq
,
4297 * Check to see if iocb matches the nport we are
4300 if ((lpfc_check_sli_ndlp(phba
, pring
, iocb
,
4302 /* It matches, so deque and call compl
4304 list_move_tail(&iocb
->list
,
4309 spin_unlock_irq(&phba
->hbalock
);
4313 /* Cancel all the IOCBs from the completions list */
4314 lpfc_sli_cancel_iocbs(phba
, &completions
, IOSTAT_LOCAL_REJECT
,
4321 * Free rpi associated with LPFC_NODELIST entry.
4322 * This routine is called from lpfc_freenode(), when we are removing
4323 * a LPFC_NODELIST entry. It is also called if the driver initiates a
4324 * LOGO that completes successfully, and we are waiting to PLOGI back
4325 * to the remote NPort. In addition, it is called after we receive
4326 * and unsolicated ELS cmd, send back a rsp, the rsp completes and
4327 * we are waiting to PLOGI back to the remote NPort.
4330 lpfc_unreg_rpi(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4332 struct lpfc_hba
*phba
= vport
->phba
;
4337 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
) {
4338 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4340 /* SLI4 ports require the physical rpi value. */
4341 rpi
= ndlp
->nlp_rpi
;
4342 if (phba
->sli_rev
== LPFC_SLI_REV4
)
4343 rpi
= phba
->sli4_hba
.rpi_ids
[ndlp
->nlp_rpi
];
4344 lpfc_unreg_login(phba
, vport
->vpi
, rpi
, mbox
);
4345 mbox
->vport
= vport
;
4346 mbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4347 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
4348 if (rc
== MBX_NOT_FINISHED
)
4349 mempool_free(mbox
, phba
->mbox_mem_pool
);
4351 lpfc_no_rpi(phba
, ndlp
);
4353 if (phba
->sli_rev
!= LPFC_SLI_REV4
)
4355 ndlp
->nlp_flag
&= ~NLP_RPI_REGISTERED
;
4356 ndlp
->nlp_flag
&= ~NLP_NPR_ADISC
;
4363 * lpfc_unreg_hba_rpis - Unregister rpis registered to the hba.
4364 * @phba: pointer to lpfc hba data structure.
4366 * This routine is invoked to unregister all the currently registered RPIs
4370 lpfc_unreg_hba_rpis(struct lpfc_hba
*phba
)
4372 struct lpfc_vport
**vports
;
4373 struct lpfc_nodelist
*ndlp
;
4374 struct Scsi_Host
*shost
;
4377 vports
= lpfc_create_vport_work_array(phba
);
4379 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
,
4380 "2884 Vport array allocation failed \n");
4383 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
4384 shost
= lpfc_shost_from_vport(vports
[i
]);
4385 spin_lock_irq(shost
->host_lock
);
4386 list_for_each_entry(ndlp
, &vports
[i
]->fc_nodes
, nlp_listp
) {
4387 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
) {
4388 /* The mempool_alloc might sleep */
4389 spin_unlock_irq(shost
->host_lock
);
4390 lpfc_unreg_rpi(vports
[i
], ndlp
);
4391 spin_lock_irq(shost
->host_lock
);
4394 spin_unlock_irq(shost
->host_lock
);
4396 lpfc_destroy_vport_work_array(phba
, vports
);
4400 lpfc_unreg_all_rpis(struct lpfc_vport
*vport
)
4402 struct lpfc_hba
*phba
= vport
->phba
;
4406 if (phba
->sli_rev
== LPFC_SLI_REV4
) {
4407 lpfc_sli4_unreg_all_rpis(vport
);
4411 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4413 lpfc_unreg_login(phba
, vport
->vpi
, LPFC_UNREG_ALL_RPIS_VPORT
,
4415 mbox
->vport
= vport
;
4416 mbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4417 mbox
->context1
= NULL
;
4418 rc
= lpfc_sli_issue_mbox_wait(phba
, mbox
, LPFC_MBOX_TMO
);
4419 if (rc
!= MBX_TIMEOUT
)
4420 mempool_free(mbox
, phba
->mbox_mem_pool
);
4422 if ((rc
== MBX_TIMEOUT
) || (rc
== MBX_NOT_FINISHED
))
4423 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
| LOG_VPORT
,
4424 "1836 Could not issue "
4425 "unreg_login(all_rpis) status %d\n", rc
);
4430 lpfc_unreg_default_rpis(struct lpfc_vport
*vport
)
4432 struct lpfc_hba
*phba
= vport
->phba
;
4436 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4438 lpfc_unreg_did(phba
, vport
->vpi
, LPFC_UNREG_ALL_DFLT_RPIS
,
4440 mbox
->vport
= vport
;
4441 mbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4442 mbox
->context1
= NULL
;
4443 rc
= lpfc_sli_issue_mbox_wait(phba
, mbox
, LPFC_MBOX_TMO
);
4444 if (rc
!= MBX_TIMEOUT
)
4445 mempool_free(mbox
, phba
->mbox_mem_pool
);
4447 if ((rc
== MBX_TIMEOUT
) || (rc
== MBX_NOT_FINISHED
))
4448 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_MBOX
| LOG_VPORT
,
4449 "1815 Could not issue "
4450 "unreg_did (default rpis) status %d\n",
4456 * Free resources associated with LPFC_NODELIST entry
4457 * so it can be freed.
4460 lpfc_cleanup_node(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4462 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4463 struct lpfc_hba
*phba
= vport
->phba
;
4464 LPFC_MBOXQ_t
*mb
, *nextmb
;
4465 struct lpfc_dmabuf
*mp
;
4467 /* Cleanup node for NPort <nlp_DID> */
4468 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
4469 "0900 Cleanup node for NPort x%x "
4470 "Data: x%x x%x x%x\n",
4471 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
4472 ndlp
->nlp_state
, ndlp
->nlp_rpi
);
4473 if (NLP_CHK_FREE_REQ(ndlp
)) {
4474 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4475 "0280 lpfc_cleanup_node: ndlp:x%p "
4476 "usgmap:x%x refcnt:%d\n",
4477 (void *)ndlp
, ndlp
->nlp_usg_map
,
4478 atomic_read(&ndlp
->kref
.refcount
));
4479 lpfc_dequeue_node(vport
, ndlp
);
4481 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_NODE
,
4482 "0281 lpfc_cleanup_node: ndlp:x%p "
4483 "usgmap:x%x refcnt:%d\n",
4484 (void *)ndlp
, ndlp
->nlp_usg_map
,
4485 atomic_read(&ndlp
->kref
.refcount
));
4486 lpfc_disable_node(vport
, ndlp
);
4489 /* cleanup any ndlp on mbox q waiting for reglogin cmpl */
4490 if ((mb
= phba
->sli
.mbox_active
)) {
4491 if ((mb
->u
.mb
.mbxCommand
== MBX_REG_LOGIN64
) &&
4492 (ndlp
== (struct lpfc_nodelist
*) mb
->context2
)) {
4493 mb
->context2
= NULL
;
4494 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4498 spin_lock_irq(&phba
->hbalock
);
4499 /* Cleanup REG_LOGIN completions which are not yet processed */
4500 list_for_each_entry(mb
, &phba
->sli
.mboxq_cmpl
, list
) {
4501 if ((mb
->u
.mb
.mbxCommand
!= MBX_REG_LOGIN64
) ||
4502 (ndlp
!= (struct lpfc_nodelist
*) mb
->context2
))
4505 mb
->context2
= NULL
;
4506 mb
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
4509 list_for_each_entry_safe(mb
, nextmb
, &phba
->sli
.mboxq
, list
) {
4510 if ((mb
->u
.mb
.mbxCommand
== MBX_REG_LOGIN64
) &&
4511 (ndlp
== (struct lpfc_nodelist
*) mb
->context2
)) {
4512 mp
= (struct lpfc_dmabuf
*) (mb
->context1
);
4514 __lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
4517 list_del(&mb
->list
);
4518 mempool_free(mb
, phba
->mbox_mem_pool
);
4519 /* We shall not invoke the lpfc_nlp_put to decrement
4520 * the ndlp reference count as we are in the process
4521 * of lpfc_nlp_release.
4525 spin_unlock_irq(&phba
->hbalock
);
4527 lpfc_els_abort(phba
, ndlp
);
4529 spin_lock_irq(shost
->host_lock
);
4530 ndlp
->nlp_flag
&= ~NLP_DELAY_TMO
;
4531 spin_unlock_irq(shost
->host_lock
);
4533 ndlp
->nlp_last_elscmd
= 0;
4534 del_timer_sync(&ndlp
->nlp_delayfunc
);
4536 list_del_init(&ndlp
->els_retry_evt
.evt_listp
);
4537 list_del_init(&ndlp
->dev_loss_evt
.evt_listp
);
4538 lpfc_cleanup_vports_rrqs(vport
, ndlp
);
4539 lpfc_unreg_rpi(vport
, ndlp
);
4545 * Check to see if we can free the nlp back to the freelist.
4546 * If we are in the middle of using the nlp in the discovery state
4547 * machine, defer the free till we reach the end of the state machine.
4550 lpfc_nlp_remove(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
)
4552 struct lpfc_hba
*phba
= vport
->phba
;
4553 struct lpfc_rport_data
*rdata
;
4557 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
4558 if ((ndlp
->nlp_flag
& NLP_DEFER_RM
) &&
4559 !(ndlp
->nlp_flag
& NLP_REG_LOGIN_SEND
) &&
4560 !(ndlp
->nlp_flag
& NLP_RPI_REGISTERED
)) {
4561 /* For this case we need to cleanup the default rpi
4562 * allocated by the firmware.
4564 if ((mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
))
4566 rc
= lpfc_reg_rpi(phba
, vport
->vpi
, ndlp
->nlp_DID
,
4567 (uint8_t *) &vport
->fc_sparam
, mbox
, ndlp
->nlp_rpi
);
4569 mempool_free(mbox
, phba
->mbox_mem_pool
);
4572 mbox
->mbox_flag
|= LPFC_MBX_IMED_UNREG
;
4573 mbox
->mbox_cmpl
= lpfc_mbx_cmpl_dflt_rpi
;
4574 mbox
->vport
= vport
;
4575 mbox
->context2
= NULL
;
4576 rc
=lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
4577 if (rc
== MBX_NOT_FINISHED
) {
4578 mempool_free(mbox
, phba
->mbox_mem_pool
);
4583 lpfc_cleanup_node(vport
, ndlp
);
4586 * We can get here with a non-NULL ndlp->rport because when we
4587 * unregister a rport we don't break the rport/node linkage. So if we
4588 * do, make sure we don't leaving any dangling pointers behind.
4591 rdata
= ndlp
->rport
->dd_data
;
4592 rdata
->pnode
= NULL
;
4598 lpfc_matchdid(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
4601 D_ID mydid
, ndlpdid
, matchdid
;
4603 if (did
== Bcast_DID
)
4606 /* First check for Direct match */
4607 if (ndlp
->nlp_DID
== did
)
4610 /* Next check for area/domain identically equals 0 match */
4611 mydid
.un
.word
= vport
->fc_myDID
;
4612 if ((mydid
.un
.b
.domain
== 0) && (mydid
.un
.b
.area
== 0)) {
4616 matchdid
.un
.word
= did
;
4617 ndlpdid
.un
.word
= ndlp
->nlp_DID
;
4618 if (matchdid
.un
.b
.id
== ndlpdid
.un
.b
.id
) {
4619 if ((mydid
.un
.b
.domain
== matchdid
.un
.b
.domain
) &&
4620 (mydid
.un
.b
.area
== matchdid
.un
.b
.area
)) {
4621 if ((ndlpdid
.un
.b
.domain
== 0) &&
4622 (ndlpdid
.un
.b
.area
== 0)) {
4623 if (ndlpdid
.un
.b
.id
)
4629 matchdid
.un
.word
= ndlp
->nlp_DID
;
4630 if ((mydid
.un
.b
.domain
== ndlpdid
.un
.b
.domain
) &&
4631 (mydid
.un
.b
.area
== ndlpdid
.un
.b
.area
)) {
4632 if ((matchdid
.un
.b
.domain
== 0) &&
4633 (matchdid
.un
.b
.area
== 0)) {
4634 if (matchdid
.un
.b
.id
)
4642 /* Search for a nodelist entry */
4643 static struct lpfc_nodelist
*
4644 __lpfc_findnode_did(struct lpfc_vport
*vport
, uint32_t did
)
4646 struct lpfc_nodelist
*ndlp
;
4649 list_for_each_entry(ndlp
, &vport
->fc_nodes
, nlp_listp
) {
4650 if (lpfc_matchdid(vport
, ndlp
, did
)) {
4651 data1
= (((uint32_t) ndlp
->nlp_state
<< 24) |
4652 ((uint32_t) ndlp
->nlp_xri
<< 16) |
4653 ((uint32_t) ndlp
->nlp_type
<< 8) |
4654 ((uint32_t) ndlp
->nlp_rpi
& 0xff));
4655 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
4656 "0929 FIND node DID "
4657 "Data: x%p x%x x%x x%x\n",
4658 ndlp
, ndlp
->nlp_DID
,
4659 ndlp
->nlp_flag
, data1
);
4664 /* FIND node did <did> NOT FOUND */
4665 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_NODE
,
4666 "0932 FIND node did x%x NOT FOUND.\n", did
);
4670 struct lpfc_nodelist
*
4671 lpfc_findnode_did(struct lpfc_vport
*vport
, uint32_t did
)
4673 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4674 struct lpfc_nodelist
*ndlp
;
4675 unsigned long iflags
;
4677 spin_lock_irqsave(shost
->host_lock
, iflags
);
4678 ndlp
= __lpfc_findnode_did(vport
, did
);
4679 spin_unlock_irqrestore(shost
->host_lock
, iflags
);
4683 struct lpfc_nodelist
*
4684 lpfc_setup_disc_node(struct lpfc_vport
*vport
, uint32_t did
)
4686 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4687 struct lpfc_nodelist
*ndlp
;
4689 ndlp
= lpfc_findnode_did(vport
, did
);
4691 if ((vport
->fc_flag
& FC_RSCN_MODE
) != 0 &&
4692 lpfc_rscn_payload_check(vport
, did
) == 0)
4694 ndlp
= (struct lpfc_nodelist
*)
4695 mempool_alloc(vport
->phba
->nlp_mem_pool
, GFP_KERNEL
);
4698 lpfc_nlp_init(vport
, ndlp
, did
);
4699 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_NPR_NODE
);
4700 spin_lock_irq(shost
->host_lock
);
4701 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4702 spin_unlock_irq(shost
->host_lock
);
4704 } else if (!NLP_CHK_NODE_ACT(ndlp
)) {
4705 ndlp
= lpfc_enable_node(vport
, ndlp
, NLP_STE_NPR_NODE
);
4708 spin_lock_irq(shost
->host_lock
);
4709 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4710 spin_unlock_irq(shost
->host_lock
);
4714 if ((vport
->fc_flag
& FC_RSCN_MODE
) &&
4715 !(vport
->fc_flag
& FC_NDISC_ACTIVE
)) {
4716 if (lpfc_rscn_payload_check(vport
, did
)) {
4717 /* If we've already received a PLOGI from this NPort
4718 * we don't need to try to discover it again.
4720 if (ndlp
->nlp_flag
& NLP_RCV_PLOGI
)
4723 /* Since this node is marked for discovery,
4724 * delay timeout is not needed.
4726 lpfc_cancel_retry_delay_tmo(vport
, ndlp
);
4727 spin_lock_irq(shost
->host_lock
);
4728 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4729 spin_unlock_irq(shost
->host_lock
);
4733 /* If we've already received a PLOGI from this NPort,
4734 * or we are already in the process of discovery on it,
4735 * we don't need to try to discover it again.
4737 if (ndlp
->nlp_state
== NLP_STE_ADISC_ISSUE
||
4738 ndlp
->nlp_state
== NLP_STE_PLOGI_ISSUE
||
4739 ndlp
->nlp_flag
& NLP_RCV_PLOGI
)
4741 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_NPR_NODE
);
4742 spin_lock_irq(shost
->host_lock
);
4743 ndlp
->nlp_flag
|= NLP_NPR_2B_DISC
;
4744 spin_unlock_irq(shost
->host_lock
);
4749 /* Build a list of nodes to discover based on the loopmap */
4751 lpfc_disc_list_loopmap(struct lpfc_vport
*vport
)
4753 struct lpfc_hba
*phba
= vport
->phba
;
4755 uint32_t alpa
, index
;
4757 if (!lpfc_is_link_up(phba
))
4760 if (phba
->fc_topology
!= LPFC_TOPOLOGY_LOOP
)
4763 /* Check for loop map present or not */
4764 if (phba
->alpa_map
[0]) {
4765 for (j
= 1; j
<= phba
->alpa_map
[0]; j
++) {
4766 alpa
= phba
->alpa_map
[j
];
4767 if (((vport
->fc_myDID
& 0xff) == alpa
) || (alpa
== 0))
4769 lpfc_setup_disc_node(vport
, alpa
);
4772 /* No alpamap, so try all alpa's */
4773 for (j
= 0; j
< FC_MAXLOOP
; j
++) {
4774 /* If cfg_scan_down is set, start from highest
4775 * ALPA (0xef) to lowest (0x1).
4777 if (vport
->cfg_scan_down
)
4780 index
= FC_MAXLOOP
- j
- 1;
4781 alpa
= lpfcAlpaArray
[index
];
4782 if ((vport
->fc_myDID
& 0xff) == alpa
)
4784 lpfc_setup_disc_node(vport
, alpa
);
4791 lpfc_issue_clear_la(struct lpfc_hba
*phba
, struct lpfc_vport
*vport
)
4794 struct lpfc_sli
*psli
= &phba
->sli
;
4795 struct lpfc_sli_ring
*extra_ring
= &psli
->ring
[psli
->extra_ring
];
4796 struct lpfc_sli_ring
*fcp_ring
= &psli
->ring
[psli
->fcp_ring
];
4797 struct lpfc_sli_ring
*next_ring
= &psli
->ring
[psli
->next_ring
];
4801 * if it's not a physical port or if we already send
4802 * clear_la then don't send it.
4804 if ((phba
->link_state
>= LPFC_CLEAR_LA
) ||
4805 (vport
->port_type
!= LPFC_PHYSICAL_PORT
) ||
4806 (phba
->sli_rev
== LPFC_SLI_REV4
))
4809 /* Link up discovery */
4810 if ((mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
)) != NULL
) {
4811 phba
->link_state
= LPFC_CLEAR_LA
;
4812 lpfc_clear_la(phba
, mbox
);
4813 mbox
->mbox_cmpl
= lpfc_mbx_cmpl_clear_la
;
4814 mbox
->vport
= vport
;
4815 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
4816 if (rc
== MBX_NOT_FINISHED
) {
4817 mempool_free(mbox
, phba
->mbox_mem_pool
);
4818 lpfc_disc_flush_list(vport
);
4819 extra_ring
->flag
&= ~LPFC_STOP_IOCB_EVENT
;
4820 fcp_ring
->flag
&= ~LPFC_STOP_IOCB_EVENT
;
4821 next_ring
->flag
&= ~LPFC_STOP_IOCB_EVENT
;
4822 phba
->link_state
= LPFC_HBA_ERROR
;
4827 /* Reg_vpi to tell firmware to resume normal operations */
4829 lpfc_issue_reg_vpi(struct lpfc_hba
*phba
, struct lpfc_vport
*vport
)
4831 LPFC_MBOXQ_t
*regvpimbox
;
4833 regvpimbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
4835 lpfc_reg_vpi(vport
, regvpimbox
);
4836 regvpimbox
->mbox_cmpl
= lpfc_mbx_cmpl_reg_vpi
;
4837 regvpimbox
->vport
= vport
;
4838 if (lpfc_sli_issue_mbox(phba
, regvpimbox
, MBX_NOWAIT
)
4839 == MBX_NOT_FINISHED
) {
4840 mempool_free(regvpimbox
, phba
->mbox_mem_pool
);
4845 /* Start Link up / RSCN discovery on NPR nodes */
4847 lpfc_disc_start(struct lpfc_vport
*vport
)
4849 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
4850 struct lpfc_hba
*phba
= vport
->phba
;
4852 uint32_t clear_la_pending
;
4855 if (!lpfc_is_link_up(phba
))
4858 if (phba
->link_state
== LPFC_CLEAR_LA
)
4859 clear_la_pending
= 1;
4861 clear_la_pending
= 0;
4863 if (vport
->port_state
< LPFC_VPORT_READY
)
4864 vport
->port_state
= LPFC_DISC_AUTH
;
4866 lpfc_set_disctmo(vport
);
4868 if (vport
->fc_prevDID
== vport
->fc_myDID
)
4873 vport
->fc_prevDID
= vport
->fc_myDID
;
4874 vport
->num_disc_nodes
= 0;
4876 /* Start Discovery state <hba_state> */
4877 lpfc_printf_vlog(vport
, KERN_INFO
, LOG_DISCOVERY
,
4878 "0202 Start Discovery hba state x%x "
4879 "Data: x%x x%x x%x\n",
4880 vport
->port_state
, vport
->fc_flag
, vport
->fc_plogi_cnt
,
4881 vport
->fc_adisc_cnt
);
4883 /* First do ADISCs - if any */
4884 num_sent
= lpfc_els_disc_adisc(vport
);
4889 /* Register the VPI for SLI3, NON-NPIV only. */
4890 if ((phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
) &&
4891 !(vport
->fc_flag
& FC_PT2PT
) &&
4892 !(vport
->fc_flag
& FC_RSCN_MODE
) &&
4893 (phba
->sli_rev
< LPFC_SLI_REV4
)) {
4894 lpfc_issue_reg_vpi(phba
, vport
);
4899 * For SLI2, we need to set port_state to READY and continue
4902 if (vport
->port_state
< LPFC_VPORT_READY
&& !clear_la_pending
) {
4903 /* If we get here, there is nothing to ADISC */
4904 if (vport
->port_type
== LPFC_PHYSICAL_PORT
)
4905 lpfc_issue_clear_la(phba
, vport
);
4907 if (!(vport
->fc_flag
& FC_ABORT_DISCOVERY
)) {
4908 vport
->num_disc_nodes
= 0;
4909 /* go thru NPR nodes and issue ELS PLOGIs */
4910 if (vport
->fc_npr_cnt
)
4911 lpfc_els_disc_plogi(vport
);
4913 if (!vport
->num_disc_nodes
) {
4914 spin_lock_irq(shost
->host_lock
);
4915 vport
->fc_flag
&= ~FC_NDISC_ACTIVE
;
4916 spin_unlock_irq(shost
->host_lock
);
4917 lpfc_can_disctmo(vport
);
4920 vport
->port_state
= LPFC_VPORT_READY
;
4922 /* Next do PLOGIs - if any */
4923 num_sent
= lpfc_els_disc_plogi(vport
);
4928 if (vport
->fc_flag
& FC_RSCN_MODE
) {
4929 /* Check to see if more RSCNs came in while we
4930 * were processing this one.
4932 if ((vport
->fc_rscn_id_cnt
== 0) &&
4933 (!(vport
->fc_flag
& FC_RSCN_DISCOVERY
))) {
4934 spin_lock_irq(shost
->host_lock
);
4935 vport
->fc_flag
&= ~FC_RSCN_MODE
;
4936 spin_unlock_irq(shost
->host_lock
);
4937 lpfc_can_disctmo(vport
);
4939 lpfc_els_handle_rscn(vport
);
4946 * Ignore completion for all IOCBs on tx and txcmpl queue for ELS
4947 * ring the match the sppecified nodelist.
4950 lpfc_free_tx(struct lpfc_hba
*phba
, struct lpfc_nodelist
*ndlp
)
4952 LIST_HEAD(completions
);
4953 struct lpfc_sli
*psli
;
4955 struct lpfc_iocbq
*iocb
, *next_iocb
;
4956 struct lpfc_sli_ring
*pring
;
4959 pring
= &psli
->ring
[LPFC_ELS_RING
];
4961 /* Error matching iocb on txq or txcmplq
4962 * First check the txq.
4964 spin_lock_irq(&phba
->hbalock
);
4965 list_for_each_entry_safe(iocb
, next_iocb
, &pring
->txq
, list
) {
4966 if (iocb
->context1
!= ndlp
) {
4970 if ((icmd
->ulpCommand
== CMD_ELS_REQUEST64_CR
) ||
4971 (icmd
->ulpCommand
== CMD_XMIT_ELS_RSP64_CX
)) {
4973 list_move_tail(&iocb
->list
, &completions
);
4978 /* Next check the txcmplq */
4979 list_for_each_entry_safe(iocb
, next_iocb
, &pring
->txcmplq
, list
) {
4980 if (iocb
->context1
!= ndlp
) {
4984 if (icmd
->ulpCommand
== CMD_ELS_REQUEST64_CR
||
4985 icmd
->ulpCommand
== CMD_XMIT_ELS_RSP64_CX
) {
4986 lpfc_sli_issue_abort_iotag(phba
, pring
, iocb
);
4989 spin_unlock_irq(&phba
->hbalock
);
4991 /* Cancel all the IOCBs from the completions list */
4992 lpfc_sli_cancel_iocbs(phba
, &completions
, IOSTAT_LOCAL_REJECT
,
4997 lpfc_disc_flush_list(struct lpfc_vport
*vport
)
4999 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
5000 struct lpfc_hba
*phba
= vport
->phba
;
5002 if (vport
->fc_plogi_cnt
|| vport
->fc_adisc_cnt
) {
5003 list_for_each_entry_safe(ndlp
, next_ndlp
, &vport
->fc_nodes
,
5005 if (!NLP_CHK_NODE_ACT(ndlp
))
5007 if (ndlp
->nlp_state
== NLP_STE_PLOGI_ISSUE
||
5008 ndlp
->nlp_state
== NLP_STE_ADISC_ISSUE
) {
5009 lpfc_free_tx(phba
, ndlp
);
5016 lpfc_cleanup_discovery_resources(struct lpfc_vport
*vport
)
5018 lpfc_els_flush_rscn(vport
);
5019 lpfc_els_flush_cmd(vport
);
5020 lpfc_disc_flush_list(vport
);
5023 /*****************************************************************************/
5025 * NAME: lpfc_disc_timeout
5027 * FUNCTION: Fibre Channel driver discovery timeout routine.
5029 * EXECUTION ENVIRONMENT: interrupt only
5037 /*****************************************************************************/
5039 lpfc_disc_timeout(unsigned long ptr
)
5041 struct lpfc_vport
*vport
= (struct lpfc_vport
*) ptr
;
5042 struct lpfc_hba
*phba
= vport
->phba
;
5043 uint32_t tmo_posted
;
5044 unsigned long flags
= 0;
5046 if (unlikely(!phba
))
5049 spin_lock_irqsave(&vport
->work_port_lock
, flags
);
5050 tmo_posted
= vport
->work_port_events
& WORKER_DISC_TMO
;
5052 vport
->work_port_events
|= WORKER_DISC_TMO
;
5053 spin_unlock_irqrestore(&vport
->work_port_lock
, flags
);
5056 lpfc_worker_wake_up(phba
);
5061 lpfc_disc_timeout_handler(struct lpfc_vport
*vport
)
5063 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
5064 struct lpfc_hba
*phba
= vport
->phba
;
5065 struct lpfc_sli
*psli
= &phba
->sli
;
5066 struct lpfc_nodelist
*ndlp
, *next_ndlp
;
5067 LPFC_MBOXQ_t
*initlinkmbox
;
5068 int rc
, clrlaerr
= 0;
5070 if (!(vport
->fc_flag
& FC_DISC_TMO
))
5073 spin_lock_irq(shost
->host_lock
);
5074 vport
->fc_flag
&= ~FC_DISC_TMO
;
5075 spin_unlock_irq(shost
->host_lock
);
5077 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_ELS_CMD
,
5078 "disc timeout: state:x%x rtry:x%x flg:x%x",
5079 vport
->port_state
, vport
->fc_ns_retry
, vport
->fc_flag
);
5081 switch (vport
->port_state
) {
5083 case LPFC_LOCAL_CFG_LINK
:
5084 /* port_state is identically LPFC_LOCAL_CFG_LINK while waiting for
5088 lpfc_printf_vlog(vport
, KERN_WARNING
, LOG_DISCOVERY
,
5089 "0221 FAN timeout\n");
5090 /* Start discovery by sending FLOGI, clean up old rpis */
5091 list_for_each_entry_safe(ndlp
, next_ndlp
, &vport
->fc_nodes
,
5093 if (!NLP_CHK_NODE_ACT(ndlp
))
5095 if (ndlp
->nlp_state
!= NLP_STE_NPR_NODE
)
5097 if (ndlp
->nlp_type
& NLP_FABRIC
) {
5098 /* Clean up the ndlp on Fabric connections */
5099 lpfc_drop_node(vport
, ndlp
);
5101 } else if (!(ndlp
->nlp_flag
& NLP_NPR_ADISC
)) {
5102 /* Fail outstanding IO now since device
5103 * is marked for PLOGI.
5105 lpfc_unreg_rpi(vport
, ndlp
);
5108 if (vport
->port_state
!= LPFC_FLOGI
) {
5109 if (phba
->sli_rev
<= LPFC_SLI_REV3
)
5110 lpfc_initial_flogi(vport
);
5112 lpfc_issue_init_vfi(vport
);
5119 /* port_state is identically LPFC_FLOGI while waiting for FLOGI cmpl */
5120 /* Initial FLOGI timeout */
5121 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5122 "0222 Initial %s timeout\n",
5123 vport
->vpi
? "FDISC" : "FLOGI");
5125 /* Assume no Fabric and go on with discovery.
5126 * Check for outstanding ELS FLOGI to abort.
5129 /* FLOGI failed, so just use loop map to make discovery list */
5130 lpfc_disc_list_loopmap(vport
);
5132 /* Start discovery */
5133 lpfc_disc_start(vport
);
5136 case LPFC_FABRIC_CFG_LINK
:
5137 /* hba_state is identically LPFC_FABRIC_CFG_LINK while waiting for
5139 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5140 "0223 Timeout while waiting for "
5141 "NameServer login\n");
5142 /* Next look for NameServer ndlp */
5143 ndlp
= lpfc_findnode_did(vport
, NameServer_DID
);
5144 if (ndlp
&& NLP_CHK_NODE_ACT(ndlp
))
5145 lpfc_els_abort(phba
, ndlp
);
5147 /* ReStart discovery */
5151 /* Check for wait for NameServer Rsp timeout */
5152 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5153 "0224 NameServer Query timeout "
5155 vport
->fc_ns_retry
, LPFC_MAX_NS_RETRY
);
5157 if (vport
->fc_ns_retry
< LPFC_MAX_NS_RETRY
) {
5158 /* Try it one more time */
5159 vport
->fc_ns_retry
++;
5160 rc
= lpfc_ns_cmd(vport
, SLI_CTNS_GID_FT
,
5161 vport
->fc_ns_retry
, 0);
5165 vport
->fc_ns_retry
= 0;
5169 * Discovery is over.
5170 * set port_state to PORT_READY if SLI2.
5171 * cmpl_reg_vpi will set port_state to READY for SLI3.
5173 if (phba
->sli_rev
< LPFC_SLI_REV4
) {
5174 if (phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
)
5175 lpfc_issue_reg_vpi(phba
, vport
);
5177 lpfc_issue_clear_la(phba
, vport
);
5178 vport
->port_state
= LPFC_VPORT_READY
;
5182 /* Setup and issue mailbox INITIALIZE LINK command */
5183 initlinkmbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
5184 if (!initlinkmbox
) {
5185 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5186 "0206 Device Discovery "
5187 "completion error\n");
5188 phba
->link_state
= LPFC_HBA_ERROR
;
5192 lpfc_linkdown(phba
);
5193 lpfc_init_link(phba
, initlinkmbox
, phba
->cfg_topology
,
5194 phba
->cfg_link_speed
);
5195 initlinkmbox
->u
.mb
.un
.varInitLnk
.lipsr_AL_PA
= 0;
5196 initlinkmbox
->vport
= vport
;
5197 initlinkmbox
->mbox_cmpl
= lpfc_sli_def_mbox_cmpl
;
5198 rc
= lpfc_sli_issue_mbox(phba
, initlinkmbox
, MBX_NOWAIT
);
5199 lpfc_set_loopback_flag(phba
);
5200 if (rc
== MBX_NOT_FINISHED
)
5201 mempool_free(initlinkmbox
, phba
->mbox_mem_pool
);
5205 case LPFC_DISC_AUTH
:
5206 /* Node Authentication timeout */
5207 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5208 "0227 Node Authentication timeout\n");
5209 lpfc_disc_flush_list(vport
);
5212 * set port_state to PORT_READY if SLI2.
5213 * cmpl_reg_vpi will set port_state to READY for SLI3.
5215 if (phba
->sli_rev
< LPFC_SLI_REV4
) {
5216 if (phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
)
5217 lpfc_issue_reg_vpi(phba
, vport
);
5218 else { /* NPIV Not enabled */
5219 lpfc_issue_clear_la(phba
, vport
);
5220 vport
->port_state
= LPFC_VPORT_READY
;
5225 case LPFC_VPORT_READY
:
5226 if (vport
->fc_flag
& FC_RSCN_MODE
) {
5227 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5228 "0231 RSCN timeout Data: x%x "
5230 vport
->fc_ns_retry
, LPFC_MAX_NS_RETRY
);
5232 /* Cleanup any outstanding ELS commands */
5233 lpfc_els_flush_cmd(vport
);
5235 lpfc_els_flush_rscn(vport
);
5236 lpfc_disc_flush_list(vport
);
5241 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5242 "0273 Unexpected discovery timeout, "
5243 "vport State x%x\n", vport
->port_state
);
5247 switch (phba
->link_state
) {
5249 /* CLEAR LA timeout */
5250 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5251 "0228 CLEAR LA timeout\n");
5256 lpfc_issue_clear_la(phba
, vport
);
5258 case LPFC_LINK_UNKNOWN
:
5259 case LPFC_WARM_START
:
5260 case LPFC_INIT_START
:
5261 case LPFC_INIT_MBX_CMDS
:
5262 case LPFC_LINK_DOWN
:
5263 case LPFC_HBA_ERROR
:
5264 lpfc_printf_vlog(vport
, KERN_ERR
, LOG_DISCOVERY
,
5265 "0230 Unexpected timeout, hba link "
5266 "state x%x\n", phba
->link_state
);
5270 case LPFC_HBA_READY
:
5275 lpfc_disc_flush_list(vport
);
5276 psli
->ring
[(psli
->extra_ring
)].flag
&= ~LPFC_STOP_IOCB_EVENT
;
5277 psli
->ring
[(psli
->fcp_ring
)].flag
&= ~LPFC_STOP_IOCB_EVENT
;
5278 psli
->ring
[(psli
->next_ring
)].flag
&= ~LPFC_STOP_IOCB_EVENT
;
5279 vport
->port_state
= LPFC_VPORT_READY
;
5286 * This routine handles processing a NameServer REG_LOGIN mailbox
5287 * command upon completion. It is setup in the LPFC_MBOXQ
5288 * as the completion routine when the command is
5289 * handed off to the SLI layer.
5292 lpfc_mbx_cmpl_fdmi_reg_login(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*pmb
)
5294 MAILBOX_t
*mb
= &pmb
->u
.mb
;
5295 struct lpfc_dmabuf
*mp
= (struct lpfc_dmabuf
*) (pmb
->context1
);
5296 struct lpfc_nodelist
*ndlp
= (struct lpfc_nodelist
*) pmb
->context2
;
5297 struct lpfc_vport
*vport
= pmb
->vport
;
5299 pmb
->context1
= NULL
;
5300 pmb
->context2
= NULL
;
5302 if (phba
->sli_rev
< LPFC_SLI_REV4
)
5303 ndlp
->nlp_rpi
= mb
->un
.varWords
[0];
5304 ndlp
->nlp_flag
|= NLP_RPI_REGISTERED
;
5305 ndlp
->nlp_type
|= NLP_FABRIC
;
5306 lpfc_nlp_set_state(vport
, ndlp
, NLP_STE_UNMAPPED_NODE
);
5309 * Start issuing Fabric-Device Management Interface (FDMI) command to
5310 * 0xfffffa (FDMI well known port) or Delay issuing FDMI command if
5311 * fdmi-on=2 (supporting RPA/hostnmae)
5314 if (vport
->cfg_fdmi_on
== 1)
5315 lpfc_fdmi_cmd(vport
, ndlp
, SLI_MGMT_DHBA
);
5317 mod_timer(&vport
->fc_fdmitmo
, jiffies
+ HZ
* 60);
5319 /* decrement the node reference count held for this callback
5323 lpfc_mbuf_free(phba
, mp
->virt
, mp
->phys
);
5325 mempool_free(pmb
, phba
->mbox_mem_pool
);
5331 lpfc_filter_by_rpi(struct lpfc_nodelist
*ndlp
, void *param
)
5333 uint16_t *rpi
= param
;
5335 return ndlp
->nlp_rpi
== *rpi
;
5339 lpfc_filter_by_wwpn(struct lpfc_nodelist
*ndlp
, void *param
)
5341 return memcmp(&ndlp
->nlp_portname
, param
,
5342 sizeof(ndlp
->nlp_portname
)) == 0;
5345 static struct lpfc_nodelist
*
5346 __lpfc_find_node(struct lpfc_vport
*vport
, node_filter filter
, void *param
)
5348 struct lpfc_nodelist
*ndlp
;
5350 list_for_each_entry(ndlp
, &vport
->fc_nodes
, nlp_listp
) {
5351 if (filter(ndlp
, param
))
5358 * This routine looks up the ndlp lists for the given RPI. If rpi found it
5359 * returns the node list element pointer else return NULL.
5361 struct lpfc_nodelist
*
5362 __lpfc_findnode_rpi(struct lpfc_vport
*vport
, uint16_t rpi
)
5364 return __lpfc_find_node(vport
, lpfc_filter_by_rpi
, &rpi
);
5368 * This routine looks up the ndlp lists for the given WWPN. If WWPN found it
5369 * returns the node element list pointer else return NULL.
5371 struct lpfc_nodelist
*
5372 lpfc_findnode_wwpn(struct lpfc_vport
*vport
, struct lpfc_name
*wwpn
)
5374 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
5375 struct lpfc_nodelist
*ndlp
;
5377 spin_lock_irq(shost
->host_lock
);
5378 ndlp
= __lpfc_find_node(vport
, lpfc_filter_by_wwpn
, wwpn
);
5379 spin_unlock_irq(shost
->host_lock
);
5384 * This routine looks up the ndlp lists for the given RPI. If the rpi
5385 * is found, the routine returns the node element list pointer else
5388 struct lpfc_nodelist
*
5389 lpfc_findnode_rpi(struct lpfc_vport
*vport
, uint16_t rpi
)
5391 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
5392 struct lpfc_nodelist
*ndlp
;
5394 spin_lock_irq(shost
->host_lock
);
5395 ndlp
= __lpfc_findnode_rpi(vport
, rpi
);
5396 spin_unlock_irq(shost
->host_lock
);
5401 * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
5402 * @phba: pointer to lpfc hba data structure.
5403 * @vpi: the physical host virtual N_Port identifier.
5405 * This routine finds a vport on a HBA (referred by @phba) through a
5406 * @vpi. The function walks the HBA's vport list and returns the address
5407 * of the vport with the matching @vpi.
5410 * NULL - No vport with the matching @vpi found
5411 * Otherwise - Address to the vport with the matching @vpi.
5414 lpfc_find_vport_by_vpid(struct lpfc_hba
*phba
, uint16_t vpi
)
5416 struct lpfc_vport
*vport
;
5417 unsigned long flags
;
5420 /* The physical ports are always vpi 0 - translate is unnecessary. */
5423 * Translate the physical vpi to the logical vpi. The
5424 * vport stores the logical vpi.
5426 for (i
= 0; i
< phba
->max_vpi
; i
++) {
5427 if (vpi
== phba
->vpi_ids
[i
])
5431 if (i
>= phba
->max_vpi
) {
5432 lpfc_printf_log(phba
, KERN_ERR
, LOG_ELS
,
5433 "2936 Could not find Vport mapped "
5434 "to vpi %d\n", vpi
);
5439 spin_lock_irqsave(&phba
->hbalock
, flags
);
5440 list_for_each_entry(vport
, &phba
->port_list
, listentry
) {
5441 if (vport
->vpi
== i
) {
5442 spin_unlock_irqrestore(&phba
->hbalock
, flags
);
5446 spin_unlock_irqrestore(&phba
->hbalock
, flags
);
5451 lpfc_nlp_init(struct lpfc_vport
*vport
, struct lpfc_nodelist
*ndlp
,
5454 memset(ndlp
, 0, sizeof (struct lpfc_nodelist
));
5456 lpfc_initialize_node(vport
, ndlp
, did
);
5457 INIT_LIST_HEAD(&ndlp
->nlp_listp
);
5459 lpfc_debugfs_disc_trc(vport
, LPFC_DISC_TRC_NODE
,
5460 "node init: did:x%x",
5461 ndlp
->nlp_DID
, 0, 0);
5466 /* This routine releases all resources associated with a specifc NPort's ndlp
5467 * and mempool_free's the nodelist.
5470 lpfc_nlp_release(struct kref
*kref
)
5472 struct lpfc_hba
*phba
;
5473 unsigned long flags
;
5474 struct lpfc_nodelist
*ndlp
= container_of(kref
, struct lpfc_nodelist
,
5477 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5478 "node release: did:x%x flg:x%x type:x%x",
5479 ndlp
->nlp_DID
, ndlp
->nlp_flag
, ndlp
->nlp_type
);
5481 lpfc_printf_vlog(ndlp
->vport
, KERN_INFO
, LOG_NODE
,
5482 "0279 lpfc_nlp_release: ndlp:x%p "
5483 "usgmap:x%x refcnt:%d\n",
5484 (void *)ndlp
, ndlp
->nlp_usg_map
,
5485 atomic_read(&ndlp
->kref
.refcount
));
5487 /* remove ndlp from action. */
5488 lpfc_nlp_remove(ndlp
->vport
, ndlp
);
5490 /* clear the ndlp active flag for all release cases */
5492 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
5493 NLP_CLR_NODE_ACT(ndlp
);
5494 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5495 if (phba
->sli_rev
== LPFC_SLI_REV4
)
5496 lpfc_sli4_free_rpi(phba
, ndlp
->nlp_rpi
);
5498 /* free ndlp memory for final ndlp release */
5499 if (NLP_CHK_FREE_REQ(ndlp
)) {
5500 kfree(ndlp
->lat_data
);
5501 mempool_free(ndlp
, ndlp
->phba
->nlp_mem_pool
);
5505 /* This routine bumps the reference count for a ndlp structure to ensure
5506 * that one discovery thread won't free a ndlp while another discovery thread
5509 struct lpfc_nodelist
*
5510 lpfc_nlp_get(struct lpfc_nodelist
*ndlp
)
5512 struct lpfc_hba
*phba
;
5513 unsigned long flags
;
5516 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5517 "node get: did:x%x flg:x%x refcnt:x%x",
5518 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
5519 atomic_read(&ndlp
->kref
.refcount
));
5520 /* The check of ndlp usage to prevent incrementing the
5521 * ndlp reference count that is in the process of being
5525 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
5526 if (!NLP_CHK_NODE_ACT(ndlp
) || NLP_CHK_FREE_ACK(ndlp
)) {
5527 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5528 lpfc_printf_vlog(ndlp
->vport
, KERN_WARNING
, LOG_NODE
,
5529 "0276 lpfc_nlp_get: ndlp:x%p "
5530 "usgmap:x%x refcnt:%d\n",
5531 (void *)ndlp
, ndlp
->nlp_usg_map
,
5532 atomic_read(&ndlp
->kref
.refcount
));
5535 kref_get(&ndlp
->kref
);
5536 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5541 /* This routine decrements the reference count for a ndlp structure. If the
5542 * count goes to 0, this indicates the the associated nodelist should be
5543 * freed. Returning 1 indicates the ndlp resource has been released; on the
5544 * other hand, returning 0 indicates the ndlp resource has not been released
5548 lpfc_nlp_put(struct lpfc_nodelist
*ndlp
)
5550 struct lpfc_hba
*phba
;
5551 unsigned long flags
;
5556 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5557 "node put: did:x%x flg:x%x refcnt:x%x",
5558 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
5559 atomic_read(&ndlp
->kref
.refcount
));
5561 spin_lock_irqsave(&phba
->ndlp_lock
, flags
);
5562 /* Check the ndlp memory free acknowledge flag to avoid the
5563 * possible race condition that kref_put got invoked again
5564 * after previous one has done ndlp memory free.
5566 if (NLP_CHK_FREE_ACK(ndlp
)) {
5567 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5568 lpfc_printf_vlog(ndlp
->vport
, KERN_WARNING
, LOG_NODE
,
5569 "0274 lpfc_nlp_put: ndlp:x%p "
5570 "usgmap:x%x refcnt:%d\n",
5571 (void *)ndlp
, ndlp
->nlp_usg_map
,
5572 atomic_read(&ndlp
->kref
.refcount
));
5575 /* Check the ndlp inactivate log flag to avoid the possible
5576 * race condition that kref_put got invoked again after ndlp
5577 * is already in inactivating state.
5579 if (NLP_CHK_IACT_REQ(ndlp
)) {
5580 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5581 lpfc_printf_vlog(ndlp
->vport
, KERN_WARNING
, LOG_NODE
,
5582 "0275 lpfc_nlp_put: ndlp:x%p "
5583 "usgmap:x%x refcnt:%d\n",
5584 (void *)ndlp
, ndlp
->nlp_usg_map
,
5585 atomic_read(&ndlp
->kref
.refcount
));
5588 /* For last put, mark the ndlp usage flags to make sure no
5589 * other kref_get and kref_put on the same ndlp shall get
5590 * in between the process when the final kref_put has been
5591 * invoked on this ndlp.
5593 if (atomic_read(&ndlp
->kref
.refcount
) == 1) {
5594 /* Indicate ndlp is put to inactive state. */
5595 NLP_SET_IACT_REQ(ndlp
);
5596 /* Acknowledge ndlp memory free has been seen. */
5597 if (NLP_CHK_FREE_REQ(ndlp
))
5598 NLP_SET_FREE_ACK(ndlp
);
5600 spin_unlock_irqrestore(&phba
->ndlp_lock
, flags
);
5601 /* Note, the kref_put returns 1 when decrementing a reference
5602 * count that was 1, it invokes the release callback function,
5603 * but it still left the reference count as 1 (not actually
5604 * performs the last decrementation). Otherwise, it actually
5605 * decrements the reference count and returns 0.
5607 return kref_put(&ndlp
->kref
, lpfc_nlp_release
);
5610 /* This routine free's the specified nodelist if it is not in use
5611 * by any other discovery thread. This routine returns 1 if the
5612 * ndlp has been freed. A return value of 0 indicates the ndlp is
5613 * not yet been released.
5616 lpfc_nlp_not_used(struct lpfc_nodelist
*ndlp
)
5618 lpfc_debugfs_disc_trc(ndlp
->vport
, LPFC_DISC_TRC_NODE
,
5619 "node not used: did:x%x flg:x%x refcnt:x%x",
5620 ndlp
->nlp_DID
, ndlp
->nlp_flag
,
5621 atomic_read(&ndlp
->kref
.refcount
));
5622 if (atomic_read(&ndlp
->kref
.refcount
) == 1)
5623 if (lpfc_nlp_put(ndlp
))
5629 * lpfc_fcf_inuse - Check if FCF can be unregistered.
5630 * @phba: Pointer to hba context object.
5632 * This function iterate through all FC nodes associated
5633 * will all vports to check if there is any node with
5634 * fc_rports associated with it. If there is an fc_rport
5635 * associated with the node, then the node is either in
5636 * discovered state or its devloss_timer is pending.
5639 lpfc_fcf_inuse(struct lpfc_hba
*phba
)
5641 struct lpfc_vport
**vports
;
5643 struct lpfc_nodelist
*ndlp
;
5644 struct Scsi_Host
*shost
;
5646 vports
= lpfc_create_vport_work_array(phba
);
5648 /* If driver cannot allocate memory, indicate fcf is in use */
5652 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
5653 shost
= lpfc_shost_from_vport(vports
[i
]);
5654 spin_lock_irq(shost
->host_lock
);
5656 * IF the CVL_RCVD bit is not set then we have sent the
5658 * If dev_loss fires while we are waiting we do not want to
5661 if (!(vports
[i
]->fc_flag
& FC_VPORT_CVL_RCVD
)) {
5662 spin_unlock_irq(shost
->host_lock
);
5666 list_for_each_entry(ndlp
, &vports
[i
]->fc_nodes
, nlp_listp
) {
5667 if (NLP_CHK_NODE_ACT(ndlp
) && ndlp
->rport
&&
5668 (ndlp
->rport
->roles
& FC_RPORT_ROLE_FCP_TARGET
)) {
5670 spin_unlock_irq(shost
->host_lock
);
5673 lpfc_printf_log(phba
, KERN_INFO
, LOG_ELS
,
5674 "2624 RPI %x DID %x flg %x still "
5676 ndlp
->nlp_rpi
, ndlp
->nlp_DID
,
5678 if (ndlp
->nlp_flag
& NLP_RPI_REGISTERED
)
5682 spin_unlock_irq(shost
->host_lock
);
5685 lpfc_destroy_vport_work_array(phba
, vports
);
5690 * lpfc_unregister_vfi_cmpl - Completion handler for unreg vfi.
5691 * @phba: Pointer to hba context object.
5692 * @mboxq: Pointer to mailbox object.
5694 * This function frees memory associated with the mailbox command.
5697 lpfc_unregister_vfi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
5699 struct lpfc_vport
*vport
= mboxq
->vport
;
5700 struct Scsi_Host
*shost
= lpfc_shost_from_vport(vport
);
5702 if (mboxq
->u
.mb
.mbxStatus
) {
5703 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5704 "2555 UNREG_VFI mbxStatus error x%x "
5706 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
5708 spin_lock_irq(shost
->host_lock
);
5709 phba
->pport
->fc_flag
&= ~FC_VFI_REGISTERED
;
5710 spin_unlock_irq(shost
->host_lock
);
5711 mempool_free(mboxq
, phba
->mbox_mem_pool
);
5716 * lpfc_unregister_fcfi_cmpl - Completion handler for unreg fcfi.
5717 * @phba: Pointer to hba context object.
5718 * @mboxq: Pointer to mailbox object.
5720 * This function frees memory associated with the mailbox command.
5723 lpfc_unregister_fcfi_cmpl(struct lpfc_hba
*phba
, LPFC_MBOXQ_t
*mboxq
)
5725 struct lpfc_vport
*vport
= mboxq
->vport
;
5727 if (mboxq
->u
.mb
.mbxStatus
) {
5728 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5729 "2550 UNREG_FCFI mbxStatus error x%x "
5731 mboxq
->u
.mb
.mbxStatus
, vport
->port_state
);
5733 mempool_free(mboxq
, phba
->mbox_mem_pool
);
5738 * lpfc_unregister_fcf_prep - Unregister fcf record preparation
5739 * @phba: Pointer to hba context object.
5741 * This function prepare the HBA for unregistering the currently registered
5742 * FCF from the HBA. It performs unregistering, in order, RPIs, VPIs, and
5746 lpfc_unregister_fcf_prep(struct lpfc_hba
*phba
)
5748 struct lpfc_vport
**vports
;
5749 struct lpfc_nodelist
*ndlp
;
5750 struct Scsi_Host
*shost
;
5753 /* Unregister RPIs */
5754 if (lpfc_fcf_inuse(phba
))
5755 lpfc_unreg_hba_rpis(phba
);
5757 /* At this point, all discovery is aborted */
5758 phba
->pport
->port_state
= LPFC_VPORT_UNKNOWN
;
5760 /* Unregister VPIs */
5761 vports
= lpfc_create_vport_work_array(phba
);
5762 if (vports
&& (phba
->sli3_options
& LPFC_SLI3_NPIV_ENABLED
))
5763 for (i
= 0; i
<= phba
->max_vports
&& vports
[i
] != NULL
; i
++) {
5764 /* Stop FLOGI/FDISC retries */
5765 ndlp
= lpfc_findnode_did(vports
[i
], Fabric_DID
);
5767 lpfc_cancel_retry_delay_tmo(vports
[i
], ndlp
);
5768 lpfc_cleanup_pending_mbox(vports
[i
]);
5769 if (phba
->sli_rev
== LPFC_SLI_REV4
)
5770 lpfc_sli4_unreg_all_rpis(vports
[i
]);
5771 lpfc_mbx_unreg_vpi(vports
[i
]);
5772 shost
= lpfc_shost_from_vport(vports
[i
]);
5773 spin_lock_irq(shost
->host_lock
);
5774 vports
[i
]->fc_flag
|= FC_VPORT_NEEDS_INIT_VPI
;
5775 vports
[i
]->vpi_state
&= ~LPFC_VPI_REGISTERED
;
5776 spin_unlock_irq(shost
->host_lock
);
5778 lpfc_destroy_vport_work_array(phba
, vports
);
5780 /* Cleanup any outstanding ELS commands */
5781 lpfc_els_flush_all_cmd(phba
);
5783 /* Unregister the physical port VFI */
5784 rc
= lpfc_issue_unreg_vfi(phba
->pport
);
5789 * lpfc_sli4_unregister_fcf - Unregister currently registered FCF record
5790 * @phba: Pointer to hba context object.
5792 * This function issues synchronous unregister FCF mailbox command to HBA to
5793 * unregister the currently registered FCF record. The driver does not reset
5794 * the driver FCF usage state flags.
5796 * Return 0 if successfully issued, none-zero otherwise.
5799 lpfc_sli4_unregister_fcf(struct lpfc_hba
*phba
)
5804 mbox
= mempool_alloc(phba
->mbox_mem_pool
, GFP_KERNEL
);
5806 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5807 "2551 UNREG_FCFI mbox allocation failed"
5808 "HBA state x%x\n", phba
->pport
->port_state
);
5811 lpfc_unreg_fcfi(mbox
, phba
->fcf
.fcfi
);
5812 mbox
->vport
= phba
->pport
;
5813 mbox
->mbox_cmpl
= lpfc_unregister_fcfi_cmpl
;
5814 rc
= lpfc_sli_issue_mbox(phba
, mbox
, MBX_NOWAIT
);
5816 if (rc
== MBX_NOT_FINISHED
) {
5817 lpfc_printf_log(phba
, KERN_ERR
, LOG_SLI
,
5818 "2552 Unregister FCFI command failed rc x%x "
5820 rc
, phba
->pport
->port_state
);
5827 * lpfc_unregister_fcf_rescan - Unregister currently registered fcf and rescan
5828 * @phba: Pointer to hba context object.
5830 * This function unregisters the currently reigstered FCF. This function
5831 * also tries to find another FCF for discovery by rescan the HBA FCF table.
5834 lpfc_unregister_fcf_rescan(struct lpfc_hba
*phba
)
5838 /* Preparation for unregistering fcf */
5839 rc
= lpfc_unregister_fcf_prep(phba
);
5841 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
,
5842 "2748 Failed to prepare for unregistering "
5843 "HBA's FCF record: rc=%d\n", rc
);
5847 /* Now, unregister FCF record and reset HBA FCF state */
5848 rc
= lpfc_sli4_unregister_fcf(phba
);
5851 /* Reset HBA FCF states after successful unregister FCF */
5852 phba
->fcf
.fcf_flag
= 0;
5853 phba
->fcf
.current_rec
.flag
= 0;
5856 * If driver is not unloading, check if there is any other
5857 * FCF record that can be used for discovery.
5859 if ((phba
->pport
->load_flag
& FC_UNLOADING
) ||
5860 (phba
->link_state
< LPFC_LINK_UP
))
5863 /* This is considered as the initial FCF discovery scan */
5864 spin_lock_irq(&phba
->hbalock
);
5865 phba
->fcf
.fcf_flag
|= FCF_INIT_DISC
;
5866 spin_unlock_irq(&phba
->hbalock
);
5868 /* Reset FCF roundrobin bmask for new discovery */
5869 lpfc_sli4_clear_fcf_rr_bmask(phba
);
5871 rc
= lpfc_sli4_fcf_scan_read_fcf_rec(phba
, LPFC_FCOE_FCF_GET_FIRST
);
5874 spin_lock_irq(&phba
->hbalock
);
5875 phba
->fcf
.fcf_flag
&= ~FCF_INIT_DISC
;
5876 spin_unlock_irq(&phba
->hbalock
);
5877 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
|LOG_MBOX
,
5878 "2553 lpfc_unregister_unused_fcf failed "
5879 "to read FCF record HBA state x%x\n",
5880 phba
->pport
->port_state
);
5885 * lpfc_unregister_fcf - Unregister the currently registered fcf record
5886 * @phba: Pointer to hba context object.
5888 * This function just unregisters the currently reigstered FCF. It does not
5889 * try to find another FCF for discovery.
5892 lpfc_unregister_fcf(struct lpfc_hba
*phba
)
5896 /* Preparation for unregistering fcf */
5897 rc
= lpfc_unregister_fcf_prep(phba
);
5899 lpfc_printf_log(phba
, KERN_ERR
, LOG_DISCOVERY
,
5900 "2749 Failed to prepare for unregistering "
5901 "HBA's FCF record: rc=%d\n", rc
);
5905 /* Now, unregister FCF record and reset HBA FCF state */
5906 rc
= lpfc_sli4_unregister_fcf(phba
);
5909 /* Set proper HBA FCF states after successful unregister FCF */
5910 spin_lock_irq(&phba
->hbalock
);
5911 phba
->fcf
.fcf_flag
&= ~FCF_REGISTERED
;
5912 spin_unlock_irq(&phba
->hbalock
);
5916 * lpfc_unregister_unused_fcf - Unregister FCF if all devices are disconnected.
5917 * @phba: Pointer to hba context object.
5919 * This function check if there are any connected remote port for the FCF and
5920 * if all the devices are disconnected, this function unregister FCFI.
5921 * This function also tries to use another FCF for discovery.
5924 lpfc_unregister_unused_fcf(struct lpfc_hba
*phba
)
5927 * If HBA is not running in FIP mode, if HBA does not support
5928 * FCoE, if FCF discovery is ongoing, or if FCF has not been
5929 * registered, do nothing.
5931 spin_lock_irq(&phba
->hbalock
);
5932 if (!(phba
->hba_flag
& HBA_FCOE_MODE
) ||
5933 !(phba
->fcf
.fcf_flag
& FCF_REGISTERED
) ||
5934 !(phba
->hba_flag
& HBA_FIP_SUPPORT
) ||
5935 (phba
->fcf
.fcf_flag
& FCF_DISCOVERY
) ||
5936 (phba
->pport
->port_state
== LPFC_FLOGI
)) {
5937 spin_unlock_irq(&phba
->hbalock
);
5940 spin_unlock_irq(&phba
->hbalock
);
5942 if (lpfc_fcf_inuse(phba
))
5945 lpfc_unregister_fcf_rescan(phba
);
5949 * lpfc_read_fcf_conn_tbl - Create driver FCF connection table.
5950 * @phba: Pointer to hba context object.
5951 * @buff: Buffer containing the FCF connection table as in the config
5953 * This function create driver data structure for the FCF connection
5954 * record table read from config region 23.
5957 lpfc_read_fcf_conn_tbl(struct lpfc_hba
*phba
,
5960 struct lpfc_fcf_conn_entry
*conn_entry
, *next_conn_entry
;
5961 struct lpfc_fcf_conn_hdr
*conn_hdr
;
5962 struct lpfc_fcf_conn_rec
*conn_rec
;
5963 uint32_t record_count
;
5966 /* Free the current connect table */
5967 list_for_each_entry_safe(conn_entry
, next_conn_entry
,
5968 &phba
->fcf_conn_rec_list
, list
) {
5969 list_del_init(&conn_entry
->list
);
5973 conn_hdr
= (struct lpfc_fcf_conn_hdr
*) buff
;
5974 record_count
= conn_hdr
->length
* sizeof(uint32_t)/
5975 sizeof(struct lpfc_fcf_conn_rec
);
5977 conn_rec
= (struct lpfc_fcf_conn_rec
*)
5978 (buff
+ sizeof(struct lpfc_fcf_conn_hdr
));
5980 for (i
= 0; i
< record_count
; i
++) {
5981 if (!(conn_rec
[i
].flags
& FCFCNCT_VALID
))
5983 conn_entry
= kzalloc(sizeof(struct lpfc_fcf_conn_entry
),
5986 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
5987 "2566 Failed to allocate connection"
5992 memcpy(&conn_entry
->conn_rec
, &conn_rec
[i
],
5993 sizeof(struct lpfc_fcf_conn_rec
));
5994 conn_entry
->conn_rec
.vlan_tag
=
5995 le16_to_cpu(conn_entry
->conn_rec
.vlan_tag
) & 0xFFF;
5996 conn_entry
->conn_rec
.flags
=
5997 le16_to_cpu(conn_entry
->conn_rec
.flags
);
5998 list_add_tail(&conn_entry
->list
,
5999 &phba
->fcf_conn_rec_list
);
6004 * lpfc_read_fcoe_param - Read FCoe parameters from conf region..
6005 * @phba: Pointer to hba context object.
6006 * @buff: Buffer containing the FCoE parameter data structure.
6008 * This function update driver data structure with config
6009 * parameters read from config region 23.
6012 lpfc_read_fcoe_param(struct lpfc_hba
*phba
,
6015 struct lpfc_fip_param_hdr
*fcoe_param_hdr
;
6016 struct lpfc_fcoe_params
*fcoe_param
;
6018 fcoe_param_hdr
= (struct lpfc_fip_param_hdr
*)
6020 fcoe_param
= (struct lpfc_fcoe_params
*)
6021 (buff
+ sizeof(struct lpfc_fip_param_hdr
));
6023 if ((fcoe_param_hdr
->parm_version
!= FIPP_VERSION
) ||
6024 (fcoe_param_hdr
->length
!= FCOE_PARAM_LENGTH
))
6027 if (fcoe_param_hdr
->parm_flags
& FIPP_VLAN_VALID
) {
6028 phba
->valid_vlan
= 1;
6029 phba
->vlan_id
= le16_to_cpu(fcoe_param
->vlan_tag
) &
6033 phba
->fc_map
[0] = fcoe_param
->fc_map
[0];
6034 phba
->fc_map
[1] = fcoe_param
->fc_map
[1];
6035 phba
->fc_map
[2] = fcoe_param
->fc_map
[2];
6040 * lpfc_get_rec_conf23 - Get a record type in config region data.
6041 * @buff: Buffer containing config region 23 data.
6042 * @size: Size of the data buffer.
6043 * @rec_type: Record type to be searched.
6045 * This function searches config region data to find the beginning
6046 * of the record specified by record_type. If record found, this
6047 * function return pointer to the record else return NULL.
6050 lpfc_get_rec_conf23(uint8_t *buff
, uint32_t size
, uint8_t rec_type
)
6052 uint32_t offset
= 0, rec_length
;
6054 if ((buff
[0] == LPFC_REGION23_LAST_REC
) ||
6055 (size
< sizeof(uint32_t)))
6058 rec_length
= buff
[offset
+ 1];
6061 * One TLV record has one word header and number of data words
6062 * specified in the rec_length field of the record header.
6064 while ((offset
+ rec_length
* sizeof(uint32_t) + sizeof(uint32_t))
6066 if (buff
[offset
] == rec_type
)
6067 return &buff
[offset
];
6069 if (buff
[offset
] == LPFC_REGION23_LAST_REC
)
6072 offset
+= rec_length
* sizeof(uint32_t) + sizeof(uint32_t);
6073 rec_length
= buff
[offset
+ 1];
6079 * lpfc_parse_fcoe_conf - Parse FCoE config data read from config region 23.
6080 * @phba: Pointer to lpfc_hba data structure.
6081 * @buff: Buffer containing config region 23 data.
6082 * @size: Size of the data buffer.
6084 * This function parses the FCoE config parameters in config region 23 and
6085 * populate driver data structure with the parameters.
6088 lpfc_parse_fcoe_conf(struct lpfc_hba
*phba
,
6092 uint32_t offset
= 0, rec_length
;
6096 * If data size is less than 2 words signature and version cannot be
6099 if (size
< 2*sizeof(uint32_t))
6102 /* Check the region signature first */
6103 if (memcmp(buff
, LPFC_REGION23_SIGNATURE
, 4)) {
6104 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6105 "2567 Config region 23 has bad signature\n");
6111 /* Check the data structure version */
6112 if (buff
[offset
] != LPFC_REGION23_VERSION
) {
6113 lpfc_printf_log(phba
, KERN_ERR
, LOG_INIT
,
6114 "2568 Config region 23 has bad version\n");
6119 rec_length
= buff
[offset
+ 1];
6121 /* Read FCoE param record */
6122 rec_ptr
= lpfc_get_rec_conf23(&buff
[offset
],
6123 size
- offset
, FCOE_PARAM_TYPE
);
6125 lpfc_read_fcoe_param(phba
, rec_ptr
);
6127 /* Read FCF connection table */
6128 rec_ptr
= lpfc_get_rec_conf23(&buff
[offset
],
6129 size
- offset
, FCOE_CONN_TBL_TYPE
);
6131 lpfc_read_fcf_conn_tbl(phba
, rec_ptr
);