2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2011 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
9 * qla2x00_debounce_register
13 * port = register address.
18 static __inline__
uint16_t
19 qla2x00_debounce_register(volatile uint16_t __iomem
*addr
)
21 volatile uint16_t first
;
22 volatile uint16_t second
;
25 first
= RD_REG_WORD(addr
);
28 second
= RD_REG_WORD(addr
);
29 } while (first
!= second
);
35 qla2x00_poll(struct rsp_que
*rsp
)
38 struct qla_hw_data
*ha
= rsp
->hw
;
39 local_irq_save(flags
);
43 ha
->isp_ops
->intr_handler(0, rsp
);
44 local_irq_restore(flags
);
47 static inline uint8_t *
48 host_to_fcp_swap(uint8_t *fcp
, uint32_t bsize
)
50 uint32_t *ifcp
= (uint32_t *) fcp
;
51 uint32_t *ofcp
= (uint32_t *) fcp
;
52 uint32_t iter
= bsize
>> 2;
55 *ofcp
++ = swab32(*ifcp
++);
61 qla2x00_is_reserved_id(scsi_qla_host_t
*vha
, uint16_t loop_id
)
63 struct qla_hw_data
*ha
= vha
->hw
;
64 if (IS_FWI2_CAPABLE(ha
))
65 return (loop_id
> NPH_LAST_HANDLE
);
67 return ((loop_id
> ha
->max_loop_id
&& loop_id
< SNS_FIRST_LOOP_ID
) ||
68 loop_id
== MANAGEMENT_SERVER
|| loop_id
== BROADCAST
);
72 qla2x00_clean_dsd_pool(struct qla_hw_data
*ha
, srb_t
*sp
)
74 struct dsd_dma
*dsd_ptr
, *tdsd_ptr
;
76 /* clean up allocated prev pool */
77 list_for_each_entry_safe(dsd_ptr
, tdsd_ptr
,
78 &((struct crc_context
*)sp
->ctx
)->dsd_list
, list
) {
79 dma_pool_free(ha
->dl_dma_pool
, dsd_ptr
->dsd_addr
,
80 dsd_ptr
->dsd_list_dma
);
81 list_del(&dsd_ptr
->list
);
84 INIT_LIST_HEAD(&((struct crc_context
*)sp
->ctx
)->dsd_list
);
88 qla2x00_set_fcport_state(fc_port_t
*fcport
, int state
)
92 old_state
= atomic_read(&fcport
->state
);
93 atomic_set(&fcport
->state
, state
);
95 /* Don't print state transitions during initial allocation of fcport */
96 if (old_state
&& old_state
!= state
) {
97 ql_dbg(ql_dbg_disc
, fcport
->vha
, 0x207d,
98 "FCPort state transitioned from %s to %s - "
99 "portid=%02x%02x%02x.\n",
100 port_state_str
[old_state
], port_state_str
[state
],
101 fcport
->d_id
.b
.domain
, fcport
->d_id
.b
.area
,
102 fcport
->d_id
.b
.al_pa
);
107 qla2x00_hba_err_chk_enabled(srb_t
*sp
)
110 * Uncomment when corresponding SCSI changes are done.
112 if (!sp->cmd->prot_chk)
117 switch (scsi_get_prot_op(sp
->cmd
)) {
118 case SCSI_PROT_READ_STRIP
:
119 case SCSI_PROT_WRITE_INSERT
:
120 if (ql2xenablehba_err_chk
>= 1)
123 case SCSI_PROT_READ_PASS
:
124 case SCSI_PROT_WRITE_PASS
:
125 if (ql2xenablehba_err_chk
>= 2)
128 case SCSI_PROT_READ_INSERT
:
129 case SCSI_PROT_WRITE_STRIP
:
136 qla2x00_reset_active(scsi_qla_host_t
*vha
)
138 scsi_qla_host_t
*base_vha
= pci_get_drvdata(vha
->hw
->pdev
);
140 /* Test appropriate base-vha and vha flags. */
141 return test_bit(ISP_ABORT_NEEDED
, &base_vha
->dpc_flags
) ||
142 test_bit(ABORT_ISP_ACTIVE
, &base_vha
->dpc_flags
) ||
143 test_bit(ISP_ABORT_RETRY
, &base_vha
->dpc_flags
) ||
144 test_bit(ISP_ABORT_NEEDED
, &vha
->dpc_flags
) ||
145 test_bit(ABORT_ISP_ACTIVE
, &vha
->dpc_flags
);