2 * Merged with mainline ieee80211.h in Aug 2004. Original ieee802_11
3 * remains copyright by the original authors
5 * Portions of the merged code are based on Host AP (software wireless
6 * LAN access point) driver for Intersil Prism2/2.5/3.
8 * Copyright (c) 2001-2002, SSH Communications Security Corp and Jouni Malinen
10 * Copyright (c) 2002-2003, Jouni Malinen <jkmaline@cc.hut.fi>
12 * Adaption to a generic IEEE 802.11 stack by James Ketrenos
13 * <jketreno@linux.intel.com>
14 * Copyright (c) 2004, Intel Corporation
16 * Modified for Realtek's wi-fi cards by Andrea Merello
17 * <andreamrl@tiscali.it>
19 * This program is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License version 2 as
21 * published by the Free Software Foundation. See README and COPYING for
26 #include <linux/if_ether.h> /* ETH_ALEN */
27 #include <linux/kernel.h> /* ARRAY_SIZE */
28 #include <linux/module.h>
29 #include <linux/jiffies.h>
30 #include <linux/timer.h>
31 #include <linux/sched.h>
32 #include <linux/semaphore.h>
33 #include <linux/interrupt.h>
35 #include <linux/delay.h>
36 #include <linux/wireless.h>
38 #include "rtl819x_HT.h"
39 #include "rtl819x_BA.h"
40 #include "rtl819x_TS.h"
43 #ifndef IW_MODE_MONITOR
44 #define IW_MODE_MONITOR 6
48 #define IWEVCUSTOM 0x8c02
54 * container_of - cast a member of a structure out to the containing structure
56 * @ptr: the pointer to the member.
57 * @type: the type of the container struct this is embedded in.
58 * @member: the name of the member within the struct.
61 #define container_of(ptr, type, member) ({ \
62 const typeof( ((type *)0)->member ) *__mptr = (ptr); \
63 (type *)( (char *)__mptr - offsetof(type,member) );})
66 #define KEY_TYPE_NA 0x0
67 #define KEY_TYPE_WEP40 0x1
68 #define KEY_TYPE_TKIP 0x2
69 #define KEY_TYPE_CCMP 0x4
70 #define KEY_TYPE_WEP104 0x5
72 /* added for rtl819x tx procedure */
73 #define MAX_QUEUE_SIZE 0x10
86 #define BEACON_QUEUE 8
88 #define LOW_QUEUE BE_QUEUE
89 #define NORMAL_QUEUE MGNT_QUEUE
92 #define SWRF_TIMEOUT 50
94 //added by amy for LEAP related
95 #define IE_CISCO_FLAG_POSITION 0x08 // Flag byte: byte 8, numbered from 0.
96 #define SUPPORT_CKIP_MIC 0x08 // bit3
97 #define SUPPORT_CKIP_PK 0x10 // bit4
98 /* defined for skb cb field */
100 typedef struct cb_desc
{
101 /* Tx Desc Related flags (8-9) */
107 u8 bTxDisableRateFallBack
:1;
108 u8 bTxUseDriverAssingedRate
:1;
109 u8 bHwSec
:1; //indicate whether use Hw security. WB
113 /* Tx Firmware Relaged flags (10-11)*/
117 u8 bUseShortPreamble
:1;
118 u8 bTxEnableFwCalcDur
:1;
125 u8 bRTSUseShortPreamble
:1;
133 /* Tx Desc related element(12-19) */
145 /* Tx firmware related element(20-27) */
158 /*--------------------------Define -------------------------------------------*/
161 #define MGN_5_5M 0x0b
173 #define MGN_MCS0 0x80
174 #define MGN_MCS1 0x81
175 #define MGN_MCS2 0x82
176 #define MGN_MCS3 0x83
177 #define MGN_MCS4 0x84
178 #define MGN_MCS5 0x85
179 #define MGN_MCS6 0x86
180 #define MGN_MCS7 0x87
181 #define MGN_MCS8 0x88
182 #define MGN_MCS9 0x89
183 #define MGN_MCS10 0x8a
184 #define MGN_MCS11 0x8b
185 #define MGN_MCS12 0x8c
186 #define MGN_MCS13 0x8d
187 #define MGN_MCS14 0x8e
188 #define MGN_MCS15 0x8f
190 //----------------------------------------------------------------------------
191 // 802.11 Management frame Reason Code field
192 //----------------------------------------------------------------------------
195 auth_not_valid
= 0x2,
208 // Reason code defined in 802.11i D10.0 p.28.
210 four_way_tmout
= 0x0f,
211 two_way_tmout
= 0x10,
213 invalid_Gcipher
= 0x12,
214 invalid_Pcipher
= 0x13,
216 unsup_RSNIEver
= 0x15,
217 invalid_RSNIE
= 0x16,
218 auth_802_1x_fail
= 0x17,
221 // Reason code defined in 7.3.1.7, 802.1e D13.0, p.42. Added by Annie, 2005-11-15.
222 QoS_unspec
= 0x20, // 32
223 QAP_bandwidth
= 0x21, // 33
224 poor_condition
= 0x22, // 34
225 no_facility
= 0x23, // 35
227 req_declined
= 0x25, // 37
228 invalid_param
= 0x26, // 38
229 req_not_honored
= 0x27, // 39
230 TS_not_created
= 0x2F, // 47
231 DL_not_allowed
= 0x30, // 48
232 dest_not_exist
= 0x31, // 49
233 dest_not_QSTA
= 0x32, // 50
238 #define aSifsTime ((priv->ieee80211->current_network.mode == IEEE_A)||(priv->ieee80211->current_network.mode == IEEE_N_24G)||(priv->ieee80211->current_network.mode == IEEE_N_5G))? 16 : 10
240 #define MGMT_QUEUE_NUM 5
242 #define IEEE_CMD_SET_WPA_PARAM 1
243 #define IEEE_CMD_SET_WPA_IE 2
244 #define IEEE_CMD_SET_ENCRYPTION 3
245 #define IEEE_CMD_MLME 4
247 #define IEEE_PARAM_WPA_ENABLED 1
248 #define IEEE_PARAM_TKIP_COUNTERMEASURES 2
249 #define IEEE_PARAM_DROP_UNENCRYPTED 3
250 #define IEEE_PARAM_PRIVACY_INVOKED 4
251 #define IEEE_PARAM_AUTH_ALGS 5
252 #define IEEE_PARAM_IEEE_802_1X 6
253 //It should consistent with the driver_XXX.c
255 #define IEEE_PARAM_WPAX_SELECT 7
256 //Added for notify the encryption type selection
258 #define IEEE_PROTO_WPA 1
259 #define IEEE_PROTO_RSN 2
260 //Added for notify the encryption type selection
262 #define IEEE_WPAX_USEGROUP 0
263 #define IEEE_WPAX_WEP40 1
264 #define IEEE_WPAX_TKIP 2
265 #define IEEE_WPAX_WRAP 3
266 #define IEEE_WPAX_CCMP 4
267 #define IEEE_WPAX_WEP104 5
269 #define IEEE_KEY_MGMT_IEEE8021X 1
270 #define IEEE_KEY_MGMT_PSK 2
272 #define IEEE_MLME_STA_DEAUTH 1
273 #define IEEE_MLME_STA_DISASSOC 2
276 #define IEEE_CRYPT_ERR_UNKNOWN_ALG 2
277 #define IEEE_CRYPT_ERR_UNKNOWN_ADDR 3
278 #define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED 4
279 #define IEEE_CRYPT_ERR_KEY_SET_FAILED 5
280 #define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED 6
281 #define IEEE_CRYPT_ERR_CARD_CONF_FAILED 7
284 #define IEEE_CRYPT_ALG_NAME_LEN 16
286 #define MAX_IE_LEN 0xff
288 // added for kernel conflict
289 #define ieee80211_crypt_deinit_entries ieee80211_crypt_deinit_entries_rsl
290 #define ieee80211_crypt_deinit_handler ieee80211_crypt_deinit_handler_rsl
291 #define ieee80211_crypt_delayed_deinit ieee80211_crypt_delayed_deinit_rsl
292 #define ieee80211_register_crypto_ops ieee80211_register_crypto_ops_rsl
293 #define ieee80211_unregister_crypto_ops ieee80211_unregister_crypto_ops_rsl
294 #define ieee80211_get_crypto_ops ieee80211_get_crypto_ops_rsl
296 #define ieee80211_ccmp_null ieee80211_ccmp_null_rsl
298 #define ieee80211_tkip_null ieee80211_tkip_null_rsl
300 #define ieee80211_wep_null ieee80211_wep_null_rsl
302 #define free_ieee80211 free_ieee80211_rsl
303 #define alloc_ieee80211 alloc_ieee80211_rsl
305 #define ieee80211_rx ieee80211_rx_rsl
306 #define ieee80211_rx_mgt ieee80211_rx_mgt_rsl
308 #define ieee80211_get_beacon ieee80211_get_beacon_rsl
309 #define ieee80211_wake_queue ieee80211_wake_queue_rsl
310 #define ieee80211_stop_queue ieee80211_stop_queue_rsl
311 #define ieee80211_reset_queue ieee80211_reset_queue_rsl
312 #define ieee80211_softmac_stop_protocol ieee80211_softmac_stop_protocol_rsl
313 #define ieee80211_softmac_start_protocol ieee80211_softmac_start_protocol_rsl
314 #define ieee80211_is_shortslot ieee80211_is_shortslot_rsl
315 #define ieee80211_is_54g ieee80211_is_54g_rsl
316 #define ieee80211_wpa_supplicant_ioctl ieee80211_wpa_supplicant_ioctl_rsl
317 #define ieee80211_ps_tx_ack ieee80211_ps_tx_ack_rsl
318 #define ieee80211_softmac_xmit ieee80211_softmac_xmit_rsl
319 #define ieee80211_stop_send_beacons ieee80211_stop_send_beacons_rsl
320 #define notify_wx_assoc_event notify_wx_assoc_event_rsl
321 #define SendDisassociation SendDisassociation_rsl
322 #define ieee80211_disassociate ieee80211_disassociate_rsl
323 #define ieee80211_start_send_beacons ieee80211_start_send_beacons_rsl
324 #define ieee80211_stop_scan ieee80211_stop_scan_rsl
325 #define ieee80211_send_probe_requests ieee80211_send_probe_requests_rsl
326 #define ieee80211_softmac_scan_syncro ieee80211_softmac_scan_syncro_rsl
327 #define ieee80211_start_scan_syncro ieee80211_start_scan_syncro_rsl
329 #define ieee80211_wx_get_essid ieee80211_wx_get_essid_rsl
330 #define ieee80211_wx_set_essid ieee80211_wx_set_essid_rsl
331 #define ieee80211_wx_set_rate ieee80211_wx_set_rate_rsl
332 #define ieee80211_wx_get_rate ieee80211_wx_get_rate_rsl
333 #define ieee80211_wx_set_wap ieee80211_wx_set_wap_rsl
334 #define ieee80211_wx_get_wap ieee80211_wx_get_wap_rsl
335 #define ieee80211_wx_set_mode ieee80211_wx_set_mode_rsl
336 #define ieee80211_wx_get_mode ieee80211_wx_get_mode_rsl
337 #define ieee80211_wx_set_scan ieee80211_wx_set_scan_rsl
338 #define ieee80211_wx_get_freq ieee80211_wx_get_freq_rsl
339 #define ieee80211_wx_set_freq ieee80211_wx_set_freq_rsl
340 #define ieee80211_wx_set_rawtx ieee80211_wx_set_rawtx_rsl
341 #define ieee80211_wx_get_name ieee80211_wx_get_name_rsl
342 #define ieee80211_wx_set_power ieee80211_wx_set_power_rsl
343 #define ieee80211_wx_get_power ieee80211_wx_get_power_rsl
344 #define ieee80211_wlan_frequencies ieee80211_wlan_frequencies_rsl
345 #define ieee80211_wx_set_rts ieee80211_wx_set_rts_rsl
346 #define ieee80211_wx_get_rts ieee80211_wx_get_rts_rsl
348 #define ieee80211_txb_free ieee80211_txb_free_rsl
350 #define ieee80211_wx_set_gen_ie ieee80211_wx_set_gen_ie_rsl
351 #define ieee80211_wx_get_scan ieee80211_wx_get_scan_rsl
352 #define ieee80211_wx_set_encode ieee80211_wx_set_encode_rsl
353 #define ieee80211_wx_get_encode ieee80211_wx_get_encode_rsl
354 #if WIRELESS_EXT >= 18
355 #define ieee80211_wx_set_mlme ieee80211_wx_set_mlme_rsl
356 #define ieee80211_wx_set_auth ieee80211_wx_set_auth_rsl
357 #define ieee80211_wx_set_encode_ext ieee80211_wx_set_encode_ext_rsl
358 #define ieee80211_wx_get_encode_ext ieee80211_wx_get_encode_ext_rsl
362 typedef struct ieee_param
{
364 u8 sta_addr
[ETH_ALEN
];
380 u8 alg
[IEEE_CRYPT_ALG_NAME_LEN
];
384 u8 seq
[8]; /* sequence counter (set: RX, get: TX) */
392 #if WIRELESS_EXT < 17
393 #define IW_QUAL_QUAL_INVALID 0x10
394 #define IW_QUAL_LEVEL_INVALID 0x20
395 #define IW_QUAL_NOISE_INVALID 0x40
396 #define IW_QUAL_QUAL_UPDATED 0x1
397 #define IW_QUAL_LEVEL_UPDATED 0x2
398 #define IW_QUAL_NOISE_UPDATED 0x4
402 // linux under 2.6.9 release may not support it, so modify it for common use
403 #define MSECS(t) msecs_to_jiffies(t)
404 #define msleep_interruptible_rsl msleep_interruptible
406 #define IEEE80211_DATA_LEN 2304
407 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
410 The figure in section 7.1.2 suggests a body size of up to 2312
411 bytes is allowed, which is a bit confusing, I suspect this
412 represents the 2304 bytes of real data, plus a possible 8 bytes of
413 WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
414 #define IEEE80211_1ADDR_LEN 10
415 #define IEEE80211_2ADDR_LEN 16
416 #define IEEE80211_3ADDR_LEN 24
417 #define IEEE80211_4ADDR_LEN 30
418 #define IEEE80211_FCS_LEN 4
419 #define IEEE80211_HLEN (IEEE80211_4ADDR_LEN)
420 #define IEEE80211_FRAME_LEN (IEEE80211_DATA_LEN + IEEE80211_HLEN)
421 #define IEEE80211_MGMT_HDR_LEN 24
422 #define IEEE80211_DATA_HDR3_LEN 24
423 #define IEEE80211_DATA_HDR4_LEN 30
425 #define MIN_FRAG_THRESHOLD 256U
426 #define MAX_FRAG_THRESHOLD 2346U
429 /* Frame control field constants */
430 #define IEEE80211_FCTL_VERS 0x0003
431 #define IEEE80211_FCTL_FTYPE 0x000c
432 #define IEEE80211_FCTL_STYPE 0x00f0
433 #define IEEE80211_FCTL_FRAMETYPE 0x00fc
434 #define IEEE80211_FCTL_TODS 0x0100
435 #define IEEE80211_FCTL_FROMDS 0x0200
436 #define IEEE80211_FCTL_DSTODS 0x0300 //added by david
437 #define IEEE80211_FCTL_MOREFRAGS 0x0400
438 #define IEEE80211_FCTL_RETRY 0x0800
439 #define IEEE80211_FCTL_PM 0x1000
440 #define IEEE80211_FCTL_MOREDATA 0x2000
441 #define IEEE80211_FCTL_WEP 0x4000
442 #define IEEE80211_FCTL_ORDER 0x8000
444 #define IEEE80211_FTYPE_MGMT 0x0000
445 #define IEEE80211_FTYPE_CTL 0x0004
446 #define IEEE80211_FTYPE_DATA 0x0008
449 #define IEEE80211_STYPE_ASSOC_REQ 0x0000
450 #define IEEE80211_STYPE_ASSOC_RESP 0x0010
451 #define IEEE80211_STYPE_REASSOC_REQ 0x0020
452 #define IEEE80211_STYPE_REASSOC_RESP 0x0030
453 #define IEEE80211_STYPE_PROBE_REQ 0x0040
454 #define IEEE80211_STYPE_PROBE_RESP 0x0050
455 #define IEEE80211_STYPE_BEACON 0x0080
456 #define IEEE80211_STYPE_ATIM 0x0090
457 #define IEEE80211_STYPE_DISASSOC 0x00A0
458 #define IEEE80211_STYPE_AUTH 0x00B0
459 #define IEEE80211_STYPE_DEAUTH 0x00C0
460 #define IEEE80211_STYPE_MANAGE_ACT 0x00D0
463 #define IEEE80211_STYPE_PSPOLL 0x00A0
464 #define IEEE80211_STYPE_RTS 0x00B0
465 #define IEEE80211_STYPE_CTS 0x00C0
466 #define IEEE80211_STYPE_ACK 0x00D0
467 #define IEEE80211_STYPE_CFEND 0x00E0
468 #define IEEE80211_STYPE_CFENDACK 0x00F0
469 #define IEEE80211_STYPE_BLOCKACK 0x0094
472 #define IEEE80211_STYPE_DATA 0x0000
473 #define IEEE80211_STYPE_DATA_CFACK 0x0010
474 #define IEEE80211_STYPE_DATA_CFPOLL 0x0020
475 #define IEEE80211_STYPE_DATA_CFACKPOLL 0x0030
476 #define IEEE80211_STYPE_NULLFUNC 0x0040
477 #define IEEE80211_STYPE_CFACK 0x0050
478 #define IEEE80211_STYPE_CFPOLL 0x0060
479 #define IEEE80211_STYPE_CFACKPOLL 0x0070
480 #define IEEE80211_STYPE_QOS_DATA 0x0080 //added for WMM 2006/8/2
481 #define IEEE80211_STYPE_QOS_NULL 0x00C0
483 #define IEEE80211_SCTL_FRAG 0x000F
484 #define IEEE80211_SCTL_SEQ 0xFFF0
487 #define IEEE80211_QCTL_TID 0x000F
489 #define FC_QOS_BIT BIT7
490 #define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
491 #define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
492 //added by wb. Is this right?
493 #define IsQoSDataFrame(pframe) ((*(u16*)pframe&(IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA)) == (IEEE80211_STYPE_QOS_DATA|IEEE80211_FTYPE_DATA))
494 #define Frame_Order(pframe) (*(u16*)pframe&IEEE80211_FCTL_ORDER)
495 #define SN_LESS(a, b) (((a-b)&0x800)!=0)
496 #define SN_EQUAL(a, b) (a == b)
497 #define MAX_DEV_ADDR_SIZE 8
498 typedef enum _ACT_CATEGORY
{
504 } ACT_CATEGORY
, *PACT_CATEGORY
;
506 typedef enum _TS_ACTION
{
511 } TS_ACTION
, *PTS_ACTION
;
513 typedef enum _BA_ACTION
{
517 } BA_ACTION
, *PBA_ACTION
;
519 typedef enum _InitialGainOpType
{
526 #define CONFIG_IEEE80211_DEBUG
527 #ifdef CONFIG_IEEE80211_DEBUG
528 extern u32 ieee80211_debug_level
;
529 #define IEEE80211_DEBUG(level, fmt, args...) \
530 do { if (ieee80211_debug_level & (level)) \
531 printk(KERN_DEBUG "ieee80211: " fmt, ## args); } while (0)
532 //wb added to debug out data buf
533 //if you want print DATA buffer related BA, please set ieee80211_debug_level to DATA|BA
534 #define IEEE80211_DEBUG_DATA(level, data, datalen) \
535 do{ if ((ieee80211_debug_level & (level)) == (level)) \
538 u8* pdata = (u8*) data; \
539 printk(KERN_DEBUG "ieee80211: %s()\n", __FUNCTION__); \
540 for(i=0; i<(int)(datalen); i++) \
542 printk("%2x ", pdata[i]); \
543 if ((i+1)%16 == 0) printk("\n"); \
549 #define IEEE80211_DEBUG(level, fmt, args...) do {} while (0)
550 #define IEEE80211_DEBUG_DATA(level, data, datalen) do {} while(0)
551 #endif /* CONFIG_IEEE80211_DEBUG */
553 /* debug macros not dependent on CONFIG_IEEE80211_DEBUG */
556 * To use the debug system;
558 * If you are defining a new debug classification, simply add it to the #define
559 * list here in the form of:
561 * #define IEEE80211_DL_xxxx VALUE
563 * shifting value to the left one bit from the previous entry. xxxx should be
564 * the name of the classification (for example, WEP)
566 * You then need to either add a IEEE80211_xxxx_DEBUG() macro definition for your
567 * classification, or use IEEE80211_DEBUG(IEEE80211_DL_xxxx, ...) whenever you want
568 * to send output to that classification.
570 * To add your debug level to the list of levels seen when you perform
572 * % cat /proc/net/ipw/debug_level
574 * you simply need to add your entry to the ipw_debug_levels array.
576 * If you do not see debug_level in /proc/net/ipw then you do not have
577 * CONFIG_IEEE80211_DEBUG defined in your kernel configuration
581 #define IEEE80211_DL_INFO (1<<0)
582 #define IEEE80211_DL_WX (1<<1)
583 #define IEEE80211_DL_SCAN (1<<2)
584 #define IEEE80211_DL_STATE (1<<3)
585 #define IEEE80211_DL_MGMT (1<<4)
586 #define IEEE80211_DL_FRAG (1<<5)
587 #define IEEE80211_DL_EAP (1<<6)
588 #define IEEE80211_DL_DROP (1<<7)
590 #define IEEE80211_DL_TX (1<<8)
591 #define IEEE80211_DL_RX (1<<9)
593 #define IEEE80211_DL_HT (1<<10) //HT
594 #define IEEE80211_DL_BA (1<<11) //ba
595 #define IEEE80211_DL_TS (1<<12) //TS
596 #define IEEE80211_DL_QOS (1<<13)
597 #define IEEE80211_DL_REORDER (1<<14)
598 #define IEEE80211_DL_IOT (1<<15)
599 #define IEEE80211_DL_IPS (1<<16)
600 #define IEEE80211_DL_TRACE (1<<29) //trace function, need to user net_ratelimit() together in order not to print too much to the screen
601 #define IEEE80211_DL_DATA (1<<30) //use this flag to control whether print data buf out.
602 #define IEEE80211_DL_ERR (1<<31) //always open
603 #define IEEE80211_ERROR(f, a...) printk(KERN_ERR "ieee80211: " f, ## a)
604 #define IEEE80211_WARNING(f, a...) printk(KERN_WARNING "ieee80211: " f, ## a)
605 #define IEEE80211_DEBUG_INFO(f, a...) IEEE80211_DEBUG(IEEE80211_DL_INFO, f, ## a)
607 #define IEEE80211_DEBUG_WX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_WX, f, ## a)
608 #define IEEE80211_DEBUG_SCAN(f, a...) IEEE80211_DEBUG(IEEE80211_DL_SCAN, f, ## a)
609 #define IEEE80211_DEBUG_STATE(f, a...) IEEE80211_DEBUG(IEEE80211_DL_STATE, f, ## a)
610 #define IEEE80211_DEBUG_MGMT(f, a...) IEEE80211_DEBUG(IEEE80211_DL_MGMT, f, ## a)
611 #define IEEE80211_DEBUG_FRAG(f, a...) IEEE80211_DEBUG(IEEE80211_DL_FRAG, f, ## a)
612 #define IEEE80211_DEBUG_EAP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_EAP, f, ## a)
613 #define IEEE80211_DEBUG_DROP(f, a...) IEEE80211_DEBUG(IEEE80211_DL_DROP, f, ## a)
614 #define IEEE80211_DEBUG_TX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_TX, f, ## a)
615 #define IEEE80211_DEBUG_RX(f, a...) IEEE80211_DEBUG(IEEE80211_DL_RX, f, ## a)
616 #define IEEE80211_DEBUG_QOS(f, a...) IEEE80211_DEBUG(IEEE80211_DL_QOS, f, ## a)
618 #ifdef CONFIG_IEEE80211_DEBUG
619 /* Added by Annie, 2005-11-22. */
620 #define MAX_STR_LEN 64
621 /* I want to see ASCII 33 to 126 only. Otherwise, I print '?'. Annie, 2005-11-22.*/
622 #define PRINTABLE(_ch) (_ch>'!' && _ch<'~')
623 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) \
624 if((_Comp) & level) \
627 u8 buffer[MAX_STR_LEN]; \
628 int length = (_Len<MAX_STR_LEN)? _Len : (MAX_STR_LEN-1) ; \
629 memset(buffer, 0, MAX_STR_LEN); \
630 memcpy(buffer, (u8 *)_Ptr, length ); \
631 for( __i=0; __i<MAX_STR_LEN; __i++ ) \
633 if( !PRINTABLE(buffer[__i]) ) buffer[__i] = '?'; \
635 buffer[length] = '\0'; \
636 printk("Rtl819x: "); \
637 printk(_TitleString); \
638 printk(": %d, <%s>\n", _Len, buffer); \
641 #define IEEE80211_PRINT_STR(_Comp, _TitleString, _Ptr, _Len) do {} while (0)
644 #include <linux/netdevice.h>
645 #include <linux/if_arp.h> /* ARPHRD_ETHER */
648 #define WIRELESS_SPY // enable iwspy support
650 #include <net/iw_handler.h> // new driver API
653 #define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
654 #endif /* ETH_P_PAE */
656 #define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
658 #ifndef ETH_P_80211_RAW
659 #define ETH_P_80211_RAW (ETH_P_ECONET + 1)
662 /* IEEE 802.11 defines */
664 #define P80211_OUI_LEN 3
666 struct ieee80211_snap_hdr
{
668 u8 dsap
; /* always 0xAA */
669 u8 ssap
; /* always 0xAA */
670 u8 ctrl
; /* always 0x03 */
671 u8 oui
[P80211_OUI_LEN
]; /* organizational universal id */
673 } __attribute__ ((packed
));
675 #define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
677 #define WLAN_FC_GET_VERS(fc) ((fc) & IEEE80211_FCTL_VERS)
678 #define WLAN_FC_GET_TYPE(fc) ((fc) & IEEE80211_FCTL_FTYPE)
679 #define WLAN_FC_GET_STYPE(fc) ((fc) & IEEE80211_FCTL_STYPE)
681 #define WLAN_FC_GET_FRAMETYPE(fc) ((fc) & IEEE80211_FCTL_FRAMETYPE)
682 #define WLAN_GET_SEQ_FRAG(seq) ((seq) & IEEE80211_SCTL_FRAG)
683 #define WLAN_GET_SEQ_SEQ(seq) (((seq) & IEEE80211_SCTL_SEQ) >> 4)
685 /* Authentication algorithms */
686 #define WLAN_AUTH_OPEN 0
687 #define WLAN_AUTH_SHARED_KEY 1
688 #define WLAN_AUTH_LEAP 2
690 #define WLAN_AUTH_CHALLENGE_LEN 128
692 #define WLAN_CAPABILITY_BSS (1<<0)
693 #define WLAN_CAPABILITY_IBSS (1<<1)
694 #define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
695 #define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
696 #define WLAN_CAPABILITY_PRIVACY (1<<4)
697 #define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
698 #define WLAN_CAPABILITY_PBCC (1<<6)
699 #define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
700 #define WLAN_CAPABILITY_SPECTRUM_MGMT (1<<8)
701 #define WLAN_CAPABILITY_QOS (1<<9)
702 #define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
703 #define WLAN_CAPABILITY_DSSS_OFDM (1<<13)
705 /* 802.11g ERP information element */
706 #define WLAN_ERP_NON_ERP_PRESENT (1<<0)
707 #define WLAN_ERP_USE_PROTECTION (1<<1)
708 #define WLAN_ERP_BARKER_PREAMBLE (1<<2)
711 enum ieee80211_statuscode
{
712 WLAN_STATUS_SUCCESS
= 0,
713 WLAN_STATUS_UNSPECIFIED_FAILURE
= 1,
714 WLAN_STATUS_CAPS_UNSUPPORTED
= 10,
715 WLAN_STATUS_REASSOC_NO_ASSOC
= 11,
716 WLAN_STATUS_ASSOC_DENIED_UNSPEC
= 12,
717 WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG
= 13,
718 WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION
= 14,
719 WLAN_STATUS_CHALLENGE_FAIL
= 15,
720 WLAN_STATUS_AUTH_TIMEOUT
= 16,
721 WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA
= 17,
722 WLAN_STATUS_ASSOC_DENIED_RATES
= 18,
724 WLAN_STATUS_ASSOC_DENIED_NOSHORTPREAMBLE
= 19,
725 WLAN_STATUS_ASSOC_DENIED_NOPBCC
= 20,
726 WLAN_STATUS_ASSOC_DENIED_NOAGILITY
= 21,
728 WLAN_STATUS_ASSOC_DENIED_NOSPECTRUM
= 22,
729 WLAN_STATUS_ASSOC_REJECTED_BAD_POWER
= 23,
730 WLAN_STATUS_ASSOC_REJECTED_BAD_SUPP_CHAN
= 24,
732 WLAN_STATUS_ASSOC_DENIED_NOSHORTTIME
= 25,
733 WLAN_STATUS_ASSOC_DENIED_NODSSSOFDM
= 26,
735 WLAN_STATUS_INVALID_IE
= 40,
736 WLAN_STATUS_INVALID_GROUP_CIPHER
= 41,
737 WLAN_STATUS_INVALID_PAIRWISE_CIPHER
= 42,
738 WLAN_STATUS_INVALID_AKMP
= 43,
739 WLAN_STATUS_UNSUPP_RSN_VERSION
= 44,
740 WLAN_STATUS_INVALID_RSN_IE_CAP
= 45,
741 WLAN_STATUS_CIPHER_SUITE_REJECTED
= 46,
745 enum ieee80211_reasoncode
{
746 WLAN_REASON_UNSPECIFIED
= 1,
747 WLAN_REASON_PREV_AUTH_NOT_VALID
= 2,
748 WLAN_REASON_DEAUTH_LEAVING
= 3,
749 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY
= 4,
750 WLAN_REASON_DISASSOC_AP_BUSY
= 5,
751 WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA
= 6,
752 WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA
= 7,
753 WLAN_REASON_DISASSOC_STA_HAS_LEFT
= 8,
754 WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH
= 9,
756 WLAN_REASON_DISASSOC_BAD_POWER
= 10,
757 WLAN_REASON_DISASSOC_BAD_SUPP_CHAN
= 11,
759 WLAN_REASON_INVALID_IE
= 13,
760 WLAN_REASON_MIC_FAILURE
= 14,
761 WLAN_REASON_4WAY_HANDSHAKE_TIMEOUT
= 15,
762 WLAN_REASON_GROUP_KEY_HANDSHAKE_TIMEOUT
= 16,
763 WLAN_REASON_IE_DIFFERENT
= 17,
764 WLAN_REASON_INVALID_GROUP_CIPHER
= 18,
765 WLAN_REASON_INVALID_PAIRWISE_CIPHER
= 19,
766 WLAN_REASON_INVALID_AKMP
= 20,
767 WLAN_REASON_UNSUPP_RSN_VERSION
= 21,
768 WLAN_REASON_INVALID_RSN_IE_CAP
= 22,
769 WLAN_REASON_IEEE8021X_FAILED
= 23,
770 WLAN_REASON_CIPHER_SUITE_REJECTED
= 24,
773 #define IEEE80211_STATMASK_SIGNAL (1<<0)
774 #define IEEE80211_STATMASK_RSSI (1<<1)
775 #define IEEE80211_STATMASK_NOISE (1<<2)
776 #define IEEE80211_STATMASK_RATE (1<<3)
777 #define IEEE80211_STATMASK_WEMASK 0x7
779 #define IEEE80211_CCK_MODULATION (1<<0)
780 #define IEEE80211_OFDM_MODULATION (1<<1)
782 #define IEEE80211_24GHZ_BAND (1<<0)
783 #define IEEE80211_52GHZ_BAND (1<<1)
785 #define IEEE80211_CCK_RATE_LEN 4
786 #define IEEE80211_CCK_RATE_1MB 0x02
787 #define IEEE80211_CCK_RATE_2MB 0x04
788 #define IEEE80211_CCK_RATE_5MB 0x0B
789 #define IEEE80211_CCK_RATE_11MB 0x16
790 #define IEEE80211_OFDM_RATE_LEN 8
791 #define IEEE80211_OFDM_RATE_6MB 0x0C
792 #define IEEE80211_OFDM_RATE_9MB 0x12
793 #define IEEE80211_OFDM_RATE_12MB 0x18
794 #define IEEE80211_OFDM_RATE_18MB 0x24
795 #define IEEE80211_OFDM_RATE_24MB 0x30
796 #define IEEE80211_OFDM_RATE_36MB 0x48
797 #define IEEE80211_OFDM_RATE_48MB 0x60
798 #define IEEE80211_OFDM_RATE_54MB 0x6C
799 #define IEEE80211_BASIC_RATE_MASK 0x80
801 #define IEEE80211_CCK_RATE_1MB_MASK (1<<0)
802 #define IEEE80211_CCK_RATE_2MB_MASK (1<<1)
803 #define IEEE80211_CCK_RATE_5MB_MASK (1<<2)
804 #define IEEE80211_CCK_RATE_11MB_MASK (1<<3)
805 #define IEEE80211_OFDM_RATE_6MB_MASK (1<<4)
806 #define IEEE80211_OFDM_RATE_9MB_MASK (1<<5)
807 #define IEEE80211_OFDM_RATE_12MB_MASK (1<<6)
808 #define IEEE80211_OFDM_RATE_18MB_MASK (1<<7)
809 #define IEEE80211_OFDM_RATE_24MB_MASK (1<<8)
810 #define IEEE80211_OFDM_RATE_36MB_MASK (1<<9)
811 #define IEEE80211_OFDM_RATE_48MB_MASK (1<<10)
812 #define IEEE80211_OFDM_RATE_54MB_MASK (1<<11)
814 #define IEEE80211_CCK_RATES_MASK 0x0000000F
815 #define IEEE80211_CCK_BASIC_RATES_MASK (IEEE80211_CCK_RATE_1MB_MASK | \
816 IEEE80211_CCK_RATE_2MB_MASK)
817 #define IEEE80211_CCK_DEFAULT_RATES_MASK (IEEE80211_CCK_BASIC_RATES_MASK | \
818 IEEE80211_CCK_RATE_5MB_MASK | \
819 IEEE80211_CCK_RATE_11MB_MASK)
821 #define IEEE80211_OFDM_RATES_MASK 0x00000FF0
822 #define IEEE80211_OFDM_BASIC_RATES_MASK (IEEE80211_OFDM_RATE_6MB_MASK | \
823 IEEE80211_OFDM_RATE_12MB_MASK | \
824 IEEE80211_OFDM_RATE_24MB_MASK)
825 #define IEEE80211_OFDM_DEFAULT_RATES_MASK (IEEE80211_OFDM_BASIC_RATES_MASK | \
826 IEEE80211_OFDM_RATE_9MB_MASK | \
827 IEEE80211_OFDM_RATE_18MB_MASK | \
828 IEEE80211_OFDM_RATE_36MB_MASK | \
829 IEEE80211_OFDM_RATE_48MB_MASK | \
830 IEEE80211_OFDM_RATE_54MB_MASK)
831 #define IEEE80211_DEFAULT_RATES_MASK (IEEE80211_OFDM_DEFAULT_RATES_MASK | \
832 IEEE80211_CCK_DEFAULT_RATES_MASK)
834 #define IEEE80211_NUM_OFDM_RATES 8
835 #define IEEE80211_NUM_CCK_RATES 4
836 #define IEEE80211_OFDM_SHIFT_MASK_A 4
839 /* this is stolen and modified from the madwifi driver*/
840 #define IEEE80211_FC0_TYPE_MASK 0x0c
841 #define IEEE80211_FC0_TYPE_DATA 0x08
842 #define IEEE80211_FC0_SUBTYPE_MASK 0xB0
843 #define IEEE80211_FC0_SUBTYPE_QOS 0x80
845 #define IEEE80211_QOS_HAS_SEQ(fc) \
846 (((fc) & (IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) == \
847 (IEEE80211_FC0_TYPE_DATA | IEEE80211_FC0_SUBTYPE_QOS))
849 /* this is stolen from ipw2200 driver */
850 #define IEEE_IBSS_MAC_HASH_SIZE 31
851 struct ieee_ibss_seq
{
855 unsigned long packet_time
[17];
856 struct list_head list
;
859 /* NOTE: This data is for statistical purposes; not all hardware provides this
860 * information for frames received. Not setting these will not cause
861 * any adverse affects. */
862 struct ieee80211_rx_stats
{
867 u16 rate
; /* in 100 kbps */
877 // u8 DataRate; // In 0.5 Mbps
878 u8 SignalQuality
; // in 0-100 index.
879 s32 RecvSignalPower
; // Real power in dBm for this packet, no beautification and aggregation.
880 s8 RxPower
; // in dBm Translate from PWdB
881 u8 SignalStrength
; // in 0-100 index.
885 u16 bShortPreamble
:1;
886 u16 Antenna
:1; //for rtl8185
887 u16 Decrypted
:1; //for rtl8185, rtl8187
888 u16 Wakeup
:1; //for rtl8185
889 u16 Reserved0
:1; //for rtl8185
894 bool bIsQosData
; // Added by Annie, 2005-12-22.
897 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
898 //1Attention Please!!!<11n or 8190 specific code should be put below this line>
899 //1!!!!!!!!!!!!!!!!!!!!!!!!!!!
906 bool RxIs40MHzPacket
;
908 u8 RxMIMOSignalStrength
[4]; // in 0~100 index
909 s8 RxMIMOSignalQuality
[2];
910 bool bPacketMatchBSSID
;
915 u16 packetlength
; // Total packet length: Must equal to sum of all FragLength
916 u16 fraglength
; // FragLength should equal to PacketLength in non-fragment case
917 u16 fragoffset
; // Data offset for this fragment
919 bool bisrxaggrsubframe
;
920 bool bPacketBeacon
; //cosa add for rssi
921 bool bToSelfBA
; //cosa add for rssi
922 char cck_adc_pwdb
[4]; //cosa add for rx path selection
927 /* IEEE 802.11 requires that STA supports concurrent reception of at least
928 * three fragmented frames. This define can be increased to support more
929 * concurrent frames, but it should be noted that each entry can consume about
930 * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
931 #define IEEE80211_FRAG_CACHE_LEN 4
933 struct ieee80211_frag_entry
{
934 unsigned long first_frag_time
;
936 unsigned int last_frag
;
938 u8 src_addr
[ETH_ALEN
];
939 u8 dst_addr
[ETH_ALEN
];
942 struct ieee80211_stats
{
943 unsigned int tx_unicast_frames
;
944 unsigned int tx_multicast_frames
;
945 unsigned int tx_fragments
;
946 unsigned int tx_unicast_octets
;
947 unsigned int tx_multicast_octets
;
948 unsigned int tx_deferred_transmissions
;
949 unsigned int tx_single_retry_frames
;
950 unsigned int tx_multiple_retry_frames
;
951 unsigned int tx_retry_limit_exceeded
;
952 unsigned int tx_discards
;
953 unsigned int rx_unicast_frames
;
954 unsigned int rx_multicast_frames
;
955 unsigned int rx_fragments
;
956 unsigned int rx_unicast_octets
;
957 unsigned int rx_multicast_octets
;
958 unsigned int rx_fcs_errors
;
959 unsigned int rx_discards_no_buffer
;
960 unsigned int tx_discards_wrong_sa
;
961 unsigned int rx_discards_undecryptable
;
962 unsigned int rx_message_in_msg_fragments
;
963 unsigned int rx_message_in_bad_msg_fragments
;
966 struct ieee80211_device
;
968 #include "ieee80211_crypt.h"
970 #define SEC_KEY_1 (1<<0)
971 #define SEC_KEY_2 (1<<1)
972 #define SEC_KEY_3 (1<<2)
973 #define SEC_KEY_4 (1<<3)
974 #define SEC_ACTIVE_KEY (1<<4)
975 #define SEC_AUTH_MODE (1<<5)
976 #define SEC_UNICAST_GROUP (1<<6)
977 #define SEC_LEVEL (1<<7)
978 #define SEC_ENABLED (1<<8)
979 #define SEC_ENCRYPT (1<<9)
981 #define SEC_LEVEL_0 0 /* None */
982 #define SEC_LEVEL_1 1 /* WEP 40 and 104 bit */
983 #define SEC_LEVEL_2 2 /* Level 1 + TKIP */
984 #define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
985 #define SEC_LEVEL_3 4 /* Level 2 + CCMP */
987 #define SEC_ALG_NONE 0
988 #define SEC_ALG_WEP 1
989 #define SEC_ALG_TKIP 2
990 #define SEC_ALG_CCMP 3
993 #define WEP_KEY_LEN 13
994 #define SCM_KEY_LEN 32
995 #define SCM_TEMPORAL_KEY_LENGTH 16
997 struct ieee80211_security
{
1002 unicast_uses_group
:1,
1004 u8 key_sizes
[WEP_KEYS
];
1005 u8 keys
[WEP_KEYS
][SCM_KEY_LEN
];
1008 } __attribute__ ((packed
));
1012 802.11 data frame from AP
1013 ,-------------------------------------------------------------------.
1014 Bytes | 2 | 2 | 6 | 6 | 6 | 2 | 0..2312 | 4 |
1015 |------|------|---------|---------|---------|------|---------|------|
1016 Desc. | ctrl | dura | DA/RA | TA | SA | Sequ | frame | fcs |
1017 | | tion | (BSSID) | | | ence | data | |
1018 `-------------------------------------------------------------------'
1019 Total: 28-2340 bytes
1022 /* Management Frame Information Element Types */
1023 enum ieee80211_mfie
{
1025 MFIE_TYPE_RATES
= 1,
1026 MFIE_TYPE_FH_SET
= 2,
1027 MFIE_TYPE_DS_SET
= 3,
1028 MFIE_TYPE_CF_SET
= 4,
1030 MFIE_TYPE_IBSS_SET
= 6,
1031 MFIE_TYPE_COUNTRY
= 7,
1032 MFIE_TYPE_HOP_PARAMS
= 8,
1033 MFIE_TYPE_HOP_TABLE
= 9,
1034 MFIE_TYPE_REQUEST
= 10,
1035 MFIE_TYPE_CHALLENGE
= 16,
1036 MFIE_TYPE_POWER_CONSTRAINT
= 32,
1037 MFIE_TYPE_POWER_CAPABILITY
= 33,
1038 MFIE_TYPE_TPC_REQUEST
= 34,
1039 MFIE_TYPE_TPC_REPORT
= 35,
1040 MFIE_TYPE_SUPP_CHANNELS
= 36,
1042 MFIE_TYPE_MEASURE_REQUEST
= 38,
1043 MFIE_TYPE_MEASURE_REPORT
= 39,
1044 MFIE_TYPE_QUIET
= 40,
1045 MFIE_TYPE_IBSS_DFS
= 41,
1048 MFIE_TYPE_RATES_EX
= 50,
1049 MFIE_TYPE_HT_CAP
= 45,
1050 MFIE_TYPE_HT_INFO
= 61,
1051 MFIE_TYPE_AIRONET
=133,
1052 MFIE_TYPE_GENERIC
= 221,
1053 MFIE_TYPE_QOS_PARAMETER
= 222,
1056 /* Minimal header; can be used for passing 802.11 frames with sufficient
1057 * information to determine what type of underlying data type is actually
1058 * stored in the data. */
1059 struct ieee80211_hdr
{
1063 } __attribute__ ((packed
));
1065 struct ieee80211_hdr_1addr
{
1070 } __attribute__ ((packed
));
1072 struct ieee80211_hdr_2addr
{
1078 } __attribute__ ((packed
));
1080 struct ieee80211_hdr_3addr
{
1088 } __attribute__ ((packed
));
1090 struct ieee80211_hdr_4addr
{
1099 } __attribute__ ((packed
));
1101 struct ieee80211_hdr_3addrqos
{
1110 } __attribute__ ((packed
));
1112 struct ieee80211_hdr_4addrqos
{
1122 } __attribute__ ((packed
));
1124 struct ieee80211_info_element
{
1128 } __attribute__ ((packed
));
1130 struct ieee80211_authentication
{
1131 struct ieee80211_hdr_3addr header
;
1136 struct ieee80211_info_element info_element
[0];
1137 } __attribute__ ((packed
));
1139 struct ieee80211_disassoc
{
1140 struct ieee80211_hdr_3addr header
;
1142 } __attribute__ ((packed
));
1144 struct ieee80211_probe_request
{
1145 struct ieee80211_hdr_3addr header
;
1146 /* SSID, supported rates */
1147 struct ieee80211_info_element info_element
[0];
1148 } __attribute__ ((packed
));
1150 struct ieee80211_probe_response
{
1151 struct ieee80211_hdr_3addr header
;
1153 __le16 beacon_interval
;
1155 /* SSID, supported rates, FH params, DS params,
1156 * CF params, IBSS params, TIM (if beacon), RSN */
1157 struct ieee80211_info_element info_element
[0];
1158 } __attribute__ ((packed
));
1160 /* Alias beacon for probe_response */
1161 #define ieee80211_beacon ieee80211_probe_response
1163 struct ieee80211_assoc_request_frame
{
1164 struct ieee80211_hdr_3addr header
;
1166 __le16 listen_interval
;
1167 /* SSID, supported rates, RSN */
1168 struct ieee80211_info_element info_element
[0];
1169 } __attribute__ ((packed
));
1171 struct ieee80211_reassoc_request_frame
{
1172 struct ieee80211_hdr_3addr header
;
1174 __le16 listen_interval
;
1175 u8 current_ap
[ETH_ALEN
];
1176 /* SSID, supported rates, RSN */
1177 struct ieee80211_info_element info_element
[0];
1178 } __attribute__ ((packed
));
1180 struct ieee80211_assoc_response_frame
{
1181 struct ieee80211_hdr_3addr header
;
1185 struct ieee80211_info_element info_element
[0]; /* supported rates */
1186 } __attribute__ ((packed
));
1188 struct ieee80211_txb
{
1195 __le16 payload_size
;
1196 struct sk_buff
*fragments
[0];
1199 #define MAX_TX_AGG_COUNT 16
1200 struct ieee80211_drv_agg_txb
{
1201 u8 nr_drv_agg_frames
;
1202 struct sk_buff
*tx_agg_frames
[MAX_TX_AGG_COUNT
];
1203 }__attribute__((packed
));
1205 #define MAX_SUBFRAME_COUNT 64
1206 struct ieee80211_rxb
{
1208 struct sk_buff
*subframes
[MAX_SUBFRAME_COUNT
];
1211 }__attribute__((packed
));
1213 typedef union _frameqos
{
1223 }frameqos
,*pframeqos
;
1225 /* SWEEP TABLE ENTRIES NUMBER*/
1226 #define MAX_SWEEP_TAB_ENTRIES 42
1227 #define MAX_SWEEP_TAB_ENTRIES_PER_PACKET 7
1228 /* MAX_RATES_LENGTH needs to be 12. The spec says 8, and many APs
1229 * only use 8, and then use extended rates for the remaining supported
1230 * rates. Other APs, however, stick all of their supported rates on the
1231 * main rates information element... */
1232 #define MAX_RATES_LENGTH ((u8)12)
1233 #define MAX_RATES_EX_LENGTH ((u8)16)
1234 #define MAX_NETWORK_COUNT 128
1236 #define MAX_CHANNEL_NUMBER 161
1237 #define IEEE80211_SOFTMAC_SCAN_TIME 100
1239 #define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
1241 #define CRC_LENGTH 4U
1243 #define MAX_WPA_IE_LEN 64
1245 #define NETWORK_EMPTY_ESSID (1<<0)
1246 #define NETWORK_HAS_OFDM (1<<1)
1247 #define NETWORK_HAS_CCK (1<<2)
1250 #define NETWORK_HAS_QOS_PARAMETERS (1<<3)
1251 #define NETWORK_HAS_QOS_INFORMATION (1<<4)
1252 #define NETWORK_HAS_QOS_MASK (NETWORK_HAS_QOS_PARAMETERS | \
1253 NETWORK_HAS_QOS_INFORMATION)
1255 #define NETWORK_HAS_POWER_CONSTRAINT (1<<5)
1256 #define NETWORK_HAS_CSA (1<<6)
1257 #define NETWORK_HAS_QUIET (1<<7)
1258 #define NETWORK_HAS_IBSS_DFS (1<<8)
1259 #define NETWORK_HAS_TPC_REPORT (1<<9)
1261 #define NETWORK_HAS_ERP_VALUE (1<<10)
1263 #define QOS_QUEUE_NUM 4
1264 #define QOS_OUI_LEN 3
1265 #define QOS_OUI_TYPE 2
1266 #define QOS_ELEMENT_ID 221
1267 #define QOS_OUI_INFO_SUB_TYPE 0
1268 #define QOS_OUI_PARAM_SUB_TYPE 1
1269 #define QOS_VERSION_1 1
1270 #define QOS_AIFSN_MIN_VALUE 2
1271 struct ieee80211_qos_information_element
{
1274 u8 qui
[QOS_OUI_LEN
];
1279 } __attribute__ ((packed
));
1281 struct ieee80211_qos_ac_parameter
{
1285 } __attribute__ ((packed
));
1287 struct ieee80211_qos_parameter_info
{
1288 struct ieee80211_qos_information_element info_element
;
1290 struct ieee80211_qos_ac_parameter ac_params_record
[QOS_QUEUE_NUM
];
1291 } __attribute__ ((packed
));
1293 struct ieee80211_qos_parameters
{
1294 __le16 cw_min
[QOS_QUEUE_NUM
];
1295 __le16 cw_max
[QOS_QUEUE_NUM
];
1296 u8 aifs
[QOS_QUEUE_NUM
];
1297 u8 flag
[QOS_QUEUE_NUM
];
1298 __le16 tx_op_limit
[QOS_QUEUE_NUM
];
1299 } __attribute__ ((packed
));
1301 struct ieee80211_qos_data
{
1302 struct ieee80211_qos_parameters parameters
;
1309 struct ieee80211_tim_parameters
{
1312 } __attribute__ ((packed
));
1315 struct ieee80211_wmm_ac_param
{
1316 u8 ac_aci_acm_aifsn
;
1317 u8 ac_ecwmin_ecwmax
;
1321 struct ieee80211_wmm_ts_info
{
1325 } __attribute__ ((packed
));
1327 struct ieee80211_wmm_tspec_elem
{
1328 struct ieee80211_wmm_ts_info ts_info
;
1335 u32 serv_start_time
;
1342 u16 surp_band_allow
;
1344 }__attribute__((packed
));
1350 EAPOL_ENCAP_ASF_ALERT
1353 static const char *eap_types
[] = {
1354 [EAP_PACKET
] = "EAP-Packet",
1355 [EAPOL_START
] = "EAPOL-Start",
1356 [EAPOL_LOGOFF
] = "EAPOL-Logoff",
1357 [EAPOL_KEY
] = "EAPOL-Key",
1358 [EAPOL_ENCAP_ASF_ALERT
] = "EAPOL-Encap-ASF-Alert"
1361 static inline const char *eap_get_type(int type
)
1363 return ((u32
)type
>= ARRAY_SIZE(eap_types
)) ? "Unknown" : eap_types
[type
];
1365 //added by amy for reorder
1366 static inline u8
Frame_QoSTID(u8
* buf
)
1368 struct ieee80211_hdr_3addr
*hdr
;
1370 hdr
= (struct ieee80211_hdr_3addr
*)buf
;
1371 fc
= le16_to_cpu(hdr
->frame_ctl
);
1372 return (u8
)((frameqos
*)(buf
+ (((fc
& IEEE80211_FCTL_TODS
)&&(fc
& IEEE80211_FCTL_FROMDS
))? 30 : 24)))->field
.tid
;
1375 //added by amy for reorder
1383 } __attribute__ ((packed
));
1385 struct ieee80211_softmac_stats
{
1386 unsigned int rx_ass_ok
;
1387 unsigned int rx_ass_err
;
1388 unsigned int rx_probe_rq
;
1389 unsigned int tx_probe_rs
;
1390 unsigned int tx_beacons
;
1391 unsigned int rx_auth_rq
;
1392 unsigned int rx_auth_rs_ok
;
1393 unsigned int rx_auth_rs_err
;
1394 unsigned int tx_auth_rq
;
1395 unsigned int no_auth_rs
;
1396 unsigned int no_ass_rs
;
1397 unsigned int tx_ass_rq
;
1398 unsigned int rx_ass_rq
;
1399 unsigned int tx_probe_rq
;
1400 unsigned int reassoc
;
1401 unsigned int swtxstop
;
1402 unsigned int swtxawake
;
1403 unsigned char CurrentShowTxate
;
1404 unsigned char last_packet_rate
;
1405 unsigned int txretrycount
;
1408 #define BEACON_PROBE_SSID_ID_POSITION 12
1410 struct ieee80211_info_element_hdr
{
1413 } __attribute__ ((packed
));
1416 * These are the data types that can make up management packets
1420 u16 beacon_interval;
1422 u8 current_ap[ETH_ALEN];
1423 u16 listen_interval;
1425 u16 association_id:14, reserved:2;
1426 } __attribute__ ((packed));
1432 #define IEEE80211_DEFAULT_TX_ESSID "Penguin"
1433 #define IEEE80211_DEFAULT_BASIC_RATE 2 //1Mbps
1435 enum {WMM_all_frame
, WMM_two_frame
, WMM_four_frame
, WMM_six_frame
};
1436 #define MAX_SP_Len (WMM_all_frame << 4)
1437 #define IEEE80211_QOS_TID 0x0f
1438 #define QOS_CTL_NOTCONTAIN_ACK (0x01 << 5)
1440 #define IEEE80211_DTIM_MBCAST 4
1441 #define IEEE80211_DTIM_UCAST 2
1442 #define IEEE80211_DTIM_VALID 1
1443 #define IEEE80211_DTIM_INVALID 0
1445 #define IEEE80211_PS_DISABLED 0
1446 #define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
1447 #define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
1449 //added by David for QoS 2006/6/30
1450 //#define WMM_Hang_8187
1451 #ifdef WMM_Hang_8187
1452 #undef WMM_Hang_8187
1455 #define WME_AC_BK 0x00
1456 #define WME_AC_BE 0x01
1457 #define WME_AC_VI 0x02
1458 #define WME_AC_VO 0x03
1459 #define WME_ACI_MASK 0x03
1460 #define WME_AIFSN_MASK 0x03
1461 #define WME_AC_PRAM_LEN 16
1463 #define MAX_RECEIVE_BUFFER_SIZE 9100
1465 //UP Mapping to AC, using in MgntQuery_SequenceNumber() and maybe for DSCP
1466 //#define UP2AC(up) ((up<3) ? ((up==0)?1:0) : (up>>1))
1467 #define UP2AC(up) ( \
1468 ((up) < 1) ? WME_AC_BE : \
1469 ((up) < 3) ? WME_AC_BK : \
1470 ((up) < 4) ? WME_AC_BE : \
1471 ((up) < 6) ? WME_AC_VI : \
1473 //AC Mapping to UP, using in Tx part for selecting the corresponding TX queue
1474 #define AC2UP(_ac) ( \
1475 ((_ac) == WME_AC_VO) ? 6 : \
1476 ((_ac) == WME_AC_VI) ? 5 : \
1477 ((_ac) == WME_AC_BK) ? 1 : \
1480 #define ETHER_ADDR_LEN 6 /* length of an Ethernet address */
1481 #define ETHERNET_HEADER_SIZE 14 /* length of two Ethernet address plus ether type*/
1483 struct ether_header
{
1484 u8 ether_dhost
[ETHER_ADDR_LEN
];
1485 u8 ether_shost
[ETHER_ADDR_LEN
];
1487 } __attribute__((packed
));
1489 #ifndef ETHERTYPE_PAE
1490 #define ETHERTYPE_PAE 0x888e /* EAPOL PAE/802.1x */
1492 #ifndef ETHERTYPE_IP
1493 #define ETHERTYPE_IP 0x0800 /* IP protocol */
1496 typedef struct _bss_ht
{
1500 // HT related elements
1506 HT_SPEC_VER ht_spec_ver
;
1507 //HT_CAPABILITY_ELE bdHTCapEle;
1508 //HT_INFORMATION_ELE bdHTInfoEle;
1511 bool long_slot_time
;
1514 typedef enum _erp_t
{
1515 ERP_NonERPpresent
= 0x01,
1516 ERP_UseProtection
= 0x02,
1517 ERP_BarkerPreambleMode
= 0x04,
1521 struct ieee80211_network
{
1522 /* These entries are used to identify a unique network */
1525 /* Ensure null-terminated for any debug msgs */
1526 u8 ssid
[IW_ESSID_MAX_SIZE
+ 1];
1528 struct ieee80211_qos_data qos_data
;
1530 //added by amy for LEAP
1531 bool bWithAironetIE
;
1532 bool bCkipSupported
;
1535 // CCXv4 S59, MBSSID.
1539 // CCX 2 S38, WLAN Device Version Number element. Annie, 2006-08-20.
1540 bool bWithCcxVerNum
;
1542 /* These are network statistics */
1543 struct ieee80211_rx_stats stats
;
1545 u8 rates
[MAX_RATES_LENGTH
];
1547 u8 rates_ex
[MAX_RATES_EX_LENGTH
];
1549 unsigned long last_scanned
;
1554 u16 beacon_interval
;
1555 u16 listen_interval
;
1558 u8 wpa_ie
[MAX_WPA_IE_LEN
];
1560 u8 rsn_ie
[MAX_WPA_IE_LEN
];
1563 struct ieee80211_tim_parameters tim
;
1566 u32 last_dtim_sta_time
[2];
1570 struct ieee80211_wmm_ac_param wmm_param
[4];
1573 u8 Turbo_Enable
;//enable turbo mode, added by thomas
1576 u8 CountryIeBuf
[MAX_IE_LEN
];
1577 // HT Related, by amy, 2008.04.29
1579 // Add to handle broadcom AP management frame CCK rate.
1580 bool broadcom_cap_exist
;
1581 bool ralink_cap_exist
;
1582 bool atheros_cap_exist
;
1583 bool cisco_cap_exist
;
1584 bool unknown_cap_exist
;
1586 bool berp_info_valid
;
1587 bool buseprotection
;
1588 //put at the end of the structure.
1589 struct list_head list
;
1592 enum ieee80211_state
{
1594 /* the card is not linked at all */
1595 IEEE80211_NOLINK
= 0,
1597 /* IEEE80211_ASSOCIATING* are for BSS client mode
1598 * the driver shall not perform RX filtering unless
1599 * the state is LINKED.
1600 * The driver shall just check for the state LINKED and
1601 * defaults to NOLINK for ALL the other states (including
1605 /* the association procedure will start (wq scheduling)*/
1606 IEEE80211_ASSOCIATING
,
1607 IEEE80211_ASSOCIATING_RETRY
,
1609 /* the association procedure is sending AUTH request*/
1610 IEEE80211_ASSOCIATING_AUTHENTICATING
,
1612 /* the association procedure has successfully authentcated
1613 * and is sending association request
1615 IEEE80211_ASSOCIATING_AUTHENTICATED
,
1617 /* the link is ok. the card associated to a BSS or linked
1618 * to a ibss cell or acting as an AP and creating the bss
1622 /* same as LINKED, but the driver shall apply RX filter
1623 * rules as we are in NO_LINK mode. As the card is still
1624 * logically linked, but it is doing a syncro site survey
1625 * then it will be back to LINKED state.
1627 IEEE80211_LINKED_SCANNING
,
1631 #define DEFAULT_MAX_SCAN_AGE (15 * HZ)
1632 #define DEFAULT_FTS 2346
1634 #define CFG_IEEE80211_RESERVE_FCS (1<<0)
1635 #define CFG_IEEE80211_COMPUTE_FCS (1<<1)
1636 #define CFG_IEEE80211_RTS (1<<2)
1638 #define IEEE80211_24GHZ_MIN_CHANNEL 1
1639 #define IEEE80211_24GHZ_MAX_CHANNEL 14
1640 #define IEEE80211_24GHZ_CHANNELS (IEEE80211_24GHZ_MAX_CHANNEL - \
1641 IEEE80211_24GHZ_MIN_CHANNEL + 1)
1643 #define IEEE80211_52GHZ_MIN_CHANNEL 34
1644 #define IEEE80211_52GHZ_MAX_CHANNEL 165
1645 #define IEEE80211_52GHZ_CHANNELS (IEEE80211_52GHZ_MAX_CHANNEL - \
1646 IEEE80211_52GHZ_MIN_CHANNEL + 1)
1650 typedef struct tx_pending_t
{
1652 struct ieee80211_txb
*txb
;
1655 typedef struct _bandwidth_autoswitch
1657 long threshold_20Mhzto40Mhz
;
1658 long threshold_40Mhzto20Mhz
;
1659 bool bforced_tx20Mhz
;
1660 bool bautoswitch_enable
;
1661 }bandwidth_autoswitch
,*pbandwidth_autoswitch
;
1664 //added by amy for order
1666 #define REORDER_WIN_SIZE 128
1667 #define REORDER_ENTRY_NUM 128
1668 typedef struct _RX_REORDER_ENTRY
1670 struct list_head List
;
1672 struct ieee80211_rxb
* prxb
;
1673 } RX_REORDER_ENTRY
, *PRX_REORDER_ENTRY
;
1674 //added by amy for order
1675 typedef enum _Fsync_State
{
1681 // Power save mode configured.
1682 typedef enum _RT_PS_MODE
1684 eActive
, // Active/Continuous access.
1685 eMaxPs
, // Max power save mode.
1686 eFastPs
// Fast power save mode.
1689 typedef enum _IPS_CALLBACK_FUNCION
1691 IPS_CALLBACK_NONE
= 0,
1692 IPS_CALLBACK_MGNT_LINK_REQUEST
= 1,
1693 IPS_CALLBACK_JOIN_REQUEST
= 2,
1694 }IPS_CALLBACK_FUNCION
;
1696 typedef enum _RT_JOIN_ACTION
{
1703 typedef struct _IbssParms
{
1705 }IbssParms
, *PIbssParms
;
1706 #define MAX_NUM_RATES 264 // Max num of support rates element: 8, Max num of ext. support rate: 255. 061122, by rcnjko.
1709 typedef enum _RT_RF_POWER_STATE
1716 typedef struct _RT_POWER_SAVE_CONTROL
1720 // Inactive Power Save(IPS) : Disable RF when disconnected
1723 bool bIPSModeBackup
;
1724 bool bSwRfProcessing
;
1725 RT_RF_POWER_STATE eInactivePowerState
;
1726 struct work_struct InactivePsWorkItem
;
1727 struct timer_list InactivePsTimer
;
1729 // Return point for join action
1730 IPS_CALLBACK_FUNCION ReturnPoint
;
1732 // Recored Parameters for rescheduled JoinRequest
1734 RT_JOIN_ACTION tmpJoinAction
;
1735 struct ieee80211_network tmpBssDesc
;
1737 // Recored Parameters for rescheduled MgntLinkRequest
1739 bool bTmpActiveScan
;
1740 bool bTmpFilterHiddenAP
;
1741 bool bTmpUpdateParms
;
1743 OCTET_STRING tmpSsid2Scan
;
1746 u8 tmpChannelNumber
;
1750 OCTET_STRING tmpSuppRateSet
;
1751 u8 tmpSuppRateBuf
[MAX_NUM_RATES
];
1757 // Leisre Poswer Save : Disable RF if connected but traffic is not busy
1761 }RT_POWER_SAVE_CONTROL
,*PRT_POWER_SAVE_CONTROL
;
1763 typedef u32 RT_RF_CHANGE_SOURCE
;
1764 #define RF_CHANGE_BY_SW BIT31
1765 #define RF_CHANGE_BY_HW BIT30
1766 #define RF_CHANGE_BY_PS BIT29
1767 #define RF_CHANGE_BY_IPS BIT28
1768 #define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
1772 COUNTRY_CODE_FCC
= 0,
1773 COUNTRY_CODE_IC
= 1,
1774 COUNTRY_CODE_ETSI
= 2,
1775 COUNTRY_CODE_SPAIN
= 3,
1776 COUNTRY_CODE_FRANCE
= 4,
1777 COUNTRY_CODE_MKK
= 5,
1778 COUNTRY_CODE_MKK1
= 6,
1779 COUNTRY_CODE_ISRAEL
= 7,
1782 COUNTRY_CODE_GLOBAL_DOMAIN
1783 }country_code_type_t
;
1785 #define RT_MAX_LD_SLOT_NUM 10
1786 typedef struct _RT_LINK_DETECT_T
{
1788 u32 NumRecvBcnInPeriod
;
1789 u32 NumRecvDataInPeriod
;
1791 u32 RxBcnNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx beacon / CheckForHang_period to determine link status
1792 u32 RxDataNum
[RT_MAX_LD_SLOT_NUM
]; // number of Rx data / CheckForHang_period to determine link status
1793 u16 SlotNum
; // number of CheckForHang period to determine link status
1796 u32 NumTxOkInPeriod
;
1797 u32 NumRxOkInPeriod
;
1799 }RT_LINK_DETECT_T
, *PRT_LINK_DETECT_T
;
1802 struct ieee80211_device
{
1803 struct net_device
*dev
;
1804 struct ieee80211_security sec
;
1806 //hw security related
1807 // u8 hwsec_support; //support?
1808 u8 hwsec_active
; //hw security active.
1809 bool is_silent_reset
;
1812 bool bSupportRemoteWakeUp
;
1813 RT_PS_MODE dot11PowerSaveMode
; // Power save mode configured.
1816 RT_RF_POWER_STATE eRFPowerState
;
1817 RT_RF_CHANGE_SOURCE RfOffReason
;
1819 //11n spec related I wonder if These info structure need to be moved out of ieee80211_device
1822 PRT_HIGH_THROUGHPUT pHTInfo
;
1823 //struct timer_list SwBwTimer;
1824 // spinlock_t chnlop_spinlock;
1825 spinlock_t bw_spinlock
;
1827 spinlock_t reorder_spinlock
;
1828 // for HT operation rate set. we use this one for HT data rate to separate different descriptors
1829 //the way fill this is the same as in the IE
1830 u8 Regdot11HTOperationalRateSet
[16]; //use RATR format
1831 u8 dot11HTOperationalRateSet
[16]; //use RATR format
1832 u8 RegHTSuppRateSet
[16];
1833 u8 HTCurrentOperaRate
;
1834 u8 HTHighestOperaRate
;
1835 //wb added for rate operation mode to firmware
1836 u8 bTxDisableRateFallBack
;
1837 u8 bTxUseDriverAssingedRate
;
1838 atomic_t atm_chnlop
;
1840 // u8 HTHighestOperaRate;
1841 // u8 HTCurrentOperaRate;
1843 // 802.11e and WMM Traffic Stream Info (TX)
1844 struct list_head Tx_TS_Admit_List
;
1845 struct list_head Tx_TS_Pending_List
;
1846 struct list_head Tx_TS_Unused_List
;
1847 TX_TS_RECORD TxTsRecord
[TOTAL_TS_NUM
];
1848 // 802.11e and WMM Traffic Stream Info (RX)
1849 struct list_head Rx_TS_Admit_List
;
1850 struct list_head Rx_TS_Pending_List
;
1851 struct list_head Rx_TS_Unused_List
;
1852 RX_TS_RECORD RxTsRecord
[TOTAL_TS_NUM
];
1854 RX_REORDER_ENTRY RxReorderEntry
[128];
1855 struct list_head RxReorder_Unused_List
;
1857 // Qos related. Added by Annie, 2005-11-01.
1858 // PSTA_QOS pStaQos;
1859 u8 ForcedPriority
; // Force per-packet priority 1~7. (default: 0, not to force it.)
1862 /* Bookkeeping structures */
1863 struct net_device_stats stats
;
1864 struct ieee80211_stats ieee_stats
;
1865 struct ieee80211_softmac_stats softmac_stats
;
1867 /* Probe / Beacon management */
1868 struct list_head network_free_list
;
1869 struct list_head network_list
;
1870 struct ieee80211_network
*networks
;
1874 int iw_mode
; /* operating mode (IW_MODE_*) */
1875 struct iw_spy_data spy_data
;
1878 spinlock_t wpax_suitlist_lock
;
1880 int tx_headroom
; /* Set to size of any additional room needed at front
1881 * of allocated Tx SKBs */
1884 /* WEP and other encryption related settings at the device level */
1885 int open_wep
; /* Set to 1 to allow unencrypted frames */
1887 int reset_on_keychange
; /* Set to 1 if the HW needs to be reset on
1888 * WEP key changes */
1890 /* If the host performs {en,de}cryption, then set to 1 */
1892 int host_encrypt_msdu
;
1894 /* host performs multicast decryption */
1895 int host_mc_decrypt
;
1897 /* host should strip IV and ICV from protected frames */
1898 /* meaningful only when hardware decryption is being used */
1899 int host_strip_iv_icv
;
1903 int ieee802_1x
; /* is IEEE 802.1X used */
1906 bool bHalfWirelessN24GMode
;
1908 int drop_unencrypted
;
1909 int tkip_countermeasures
;
1910 int privacy_invoked
;
1914 u16 pairwise_key_type
;
1916 struct list_head crypt_deinit_list
;
1917 struct ieee80211_crypt_data
*crypt
[WEP_KEYS
];
1918 int tx_keyidx
; /* default TX key index (crypt[tx_keyidx]) */
1919 struct timer_list crypt_deinit_timer
;
1922 int bcrx_sta_key
; /* use individual keys to override default keys even
1923 * with RX of broad/multicast frames */
1925 /* Fragmentation structures */
1926 // each streaming contain a entry
1927 struct ieee80211_frag_entry frag_cache
[17][IEEE80211_FRAG_CACHE_LEN
];
1928 unsigned int frag_next_idx
[17];
1929 u16 fts
; /* Fragmentation Threshold */
1930 #define DEFAULT_RTS_THRESHOLD 2346U
1931 #define MIN_RTS_THRESHOLD 1
1932 #define MAX_RTS_THRESHOLD 2346U
1933 u16 rts
; /* RTS threshold */
1935 /* Association info */
1938 /* This stores infos for the current network.
1939 * Either the network we are associated in INFRASTRUCTURE
1940 * or the network that we are creating in MASTER mode.
1941 * ad-hoc is a mixture ;-).
1942 * Note that in infrastructure mode, even when not associated,
1943 * fields bssid and essid may be valid (if wpa_set and essid_set
1944 * are true) as thy carry the value set by the user via iwconfig
1946 struct ieee80211_network current_network
;
1948 enum ieee80211_state state
;
1952 int mode
; /* A, B, G */
1953 int modulation
; /* CCK, OFDM */
1954 int freq_band
; /* 2.4Ghz, 5.2Ghz, Mixed */
1955 int abg_true
; /* ABG flag */
1957 /* used for forcing the ibss workqueue to terminate
1958 * without wait for the syncro scan to terminate
1960 short sync_scan_hurryup
;
1965 u16 prev_seq_ctl
; /* used to drop duplicate frames */
1967 /* map of allowed channels. 0 is dummy */
1968 // FIXME: remember to default to a basic channel plan depending of the PHY type
1971 int rate
; /* current rate */
1973 //FIXME: pleace callback, see if redundant with softmac_features
1976 /* this contains flags for selectively enable softmac support */
1977 u16 softmac_features
;
1979 /* if the sequence control field is not filled by HW */
1982 /* association procedure transaction sequence number */
1985 /* AID for RTXed association responses */
1988 /* power save mode related*/
1993 struct tasklet_struct ps_task
;
1998 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2001 short proto_started
;
2003 struct semaphore wx_sem
;
2004 struct semaphore scan_sem
;
2006 spinlock_t mgmt_tx_lock
;
2007 spinlock_t beacon_lock
;
2014 u8 wpax_type_set
; //{added by David, 2006.9.28}
2015 u32 wpax_type_notify
; //{added by David, 2006.9.26}
2017 /* QoS related flag */
2018 char init_wmmparam_flag
;
2019 /* set on initialization */
2022 /* for discarding duplicated packets in IBSS */
2023 struct list_head ibss_mac_hash
[IEEE_IBSS_MAC_HASH_SIZE
];
2025 /* for discarding duplicated packets in BSS */
2026 u16 last_rxseq_num
[17]; /* rx seq previous per-tid */
2027 u16 last_rxfrag_num
[17];/* tx frag previous per-tid */
2028 unsigned long last_packet_time
[17];
2031 unsigned long last_rx_ps_time
;
2033 /* used if IEEE_SOFTMAC_SINGLE_QUEUE is set */
2034 struct sk_buff
*mgmt_queue_ring
[MGMT_QUEUE_NUM
];
2035 int mgmt_queue_head
;
2036 int mgmt_queue_tail
;
2037 //{ added for rtl819x
2038 #define IEEE80211_QUEUE_LIMIT 128
2040 unsigned int hw_header
;
2041 struct sk_buff_head skb_waitQ
[MAX_QUEUE_SIZE
];
2042 struct sk_buff_head skb_aggQ
[MAX_QUEUE_SIZE
];
2043 struct sk_buff_head skb_drv_aggQ
[MAX_QUEUE_SIZE
];
2044 u32 sta_edca_param
[4];
2046 // Enable/Disable Rx immediate BA capability.
2047 bool enable_rx_imm_BA
;
2048 bool bibsscoordinator
;
2050 //+by amy for DM ,080515
2051 //Dynamic Tx power for near/far range enable/Disable , by amy , 2008-05-15
2052 bool bdynamic_txpower_enable
;
2054 bool bCTSToSelfEnable
;
2057 u32 fsync_time_interval
;
2058 u32 fsync_rate_bitmap
;
2059 u8 fsync_rssi_threshold
;
2062 u8 fsync_multiple_timeinterval
; // FsyncMultipleTimeInterval * FsyncTimeInterval
2063 u32 fsync_firstdiff_ratethreshold
; // low threshold
2064 u32 fsync_seconddiff_ratethreshold
; // decrease threshold
2065 Fsync_State fsync_state
;
2066 bool bis_any_nonbepkts
;
2067 //20Mhz 40Mhz AutoSwitch Threshold
2068 bandwidth_autoswitch bandwidth_auto_switch
;
2069 //for txpower tracking
2072 //added by amy for AP roaming
2073 RT_LINK_DETECT_T LinkDetectInfo
;
2074 //added by amy for ps
2075 RT_POWER_SAVE_CONTROL PowerSaveControl
;
2077 /* used if IEEE_SOFTMAC_TX_QUEUE is set */
2078 struct tx_pending_t tx_pending
;
2080 /* used if IEEE_SOFTMAC_ASSOCIATE is set */
2081 struct timer_list associate_timer
;
2083 /* used if IEEE_SOFTMAC_BEACONS is set */
2084 struct timer_list beacon_timer
;
2085 struct work_struct associate_complete_wq
;
2086 struct work_struct associate_procedure_wq
;
2087 struct delayed_work softmac_scan_wq
;
2088 struct delayed_work associate_retry_wq
;
2089 struct delayed_work start_ibss_wq
;
2090 struct work_struct wx_sync_scan_wq
;
2091 struct workqueue_struct
*wq
;
2092 // Qos related. Added by Annie, 2005-11-01.
2095 //u32 STA_EDCA_PARAM[4];
2096 //CHANNEL_ACCESS_SETTING ChannelAccessSetting;
2099 /* Callback functions */
2100 void (*set_security
)(struct net_device
*dev
,
2101 struct ieee80211_security
*sec
);
2103 /* Used to TX data frame by using txb structs.
2104 * this is not used if in the softmac_features
2105 * is set the flag IEEE_SOFTMAC_TX_QUEUE
2107 int (*hard_start_xmit
)(struct ieee80211_txb
*txb
,
2108 struct net_device
*dev
);
2110 int (*reset_port
)(struct net_device
*dev
);
2111 int (*is_queue_full
) (struct net_device
* dev
, int pri
);
2113 int (*handle_management
) (struct net_device
* dev
,
2114 struct ieee80211_network
* network
, u16 type
);
2115 int (*is_qos_active
) (struct net_device
*dev
, struct sk_buff
*skb
);
2117 /* Softmac-generated frames (mamagement) are TXed via this
2118 * callback if the flag IEEE_SOFTMAC_SINGLE_QUEUE is
2119 * not set. As some cards may have different HW queues that
2120 * one might want to use for data and management frames
2121 * the option to have two callbacks might be useful.
2122 * This function can't sleep.
2124 int (*softmac_hard_start_xmit
)(struct sk_buff
*skb
,
2125 struct net_device
*dev
);
2127 /* used instead of hard_start_xmit (not softmac_hard_start_xmit)
2128 * if the IEEE_SOFTMAC_TX_QUEUE feature is used to TX data
2129 * frames. I the option IEEE_SOFTMAC_SINGLE_QUEUE is also set
2130 * then also management frames are sent via this callback.
2131 * This function can't sleep.
2133 void (*softmac_data_hard_start_xmit
)(struct sk_buff
*skb
,
2134 struct net_device
*dev
,int rate
);
2136 /* stops the HW queue for DATA frames. Useful to avoid
2137 * waste time to TX data frame when we are reassociating
2138 * This function can sleep.
2140 void (*data_hard_stop
)(struct net_device
*dev
);
2142 /* OK this is complementar to data_poll_hard_stop */
2143 void (*data_hard_resume
)(struct net_device
*dev
);
2145 /* ask to the driver to retune the radio .
2146 * This function can sleep. the driver should ensure
2147 * the radio has been swithced before return.
2149 void (*set_chan
)(struct net_device
*dev
,short ch
);
2151 /* These are not used if the ieee stack takes care of
2152 * scanning (IEEE_SOFTMAC_SCAN feature set).
2153 * In this case only the set_chan is used.
2155 * The syncro version is similar to the start_scan but
2156 * does not return until all channels has been scanned.
2157 * this is called in user context and should sleep,
2158 * it is called in a work_queue when swithcing to ad-hoc mode
2159 * or in behalf of iwlist scan when the card is associated
2160 * and root user ask for a scan.
2161 * the function stop_scan should stop both the syncro and
2162 * background scanning and can sleep.
2163 * The function start_scan should initiate the background
2164 * scanning and can't sleep.
2166 void (*scan_syncro
)(struct net_device
*dev
);
2167 void (*start_scan
)(struct net_device
*dev
);
2168 void (*stop_scan
)(struct net_device
*dev
);
2170 /* indicate the driver that the link state is changed
2171 * for example it may indicate the card is associated now.
2172 * Driver might be interested in this to apply RX filter
2173 * rules or simply light the LINK led
2175 void (*link_change
)(struct net_device
*dev
);
2177 /* these two function indicates to the HW when to start
2178 * and stop to send beacons. This is used when the
2179 * IEEE_SOFTMAC_BEACONS is not set. For now the
2180 * stop_send_bacons is NOT guaranteed to be called only
2181 * after start_send_beacons.
2183 void (*start_send_beacons
) (struct net_device
*dev
,u16 tx_rate
);
2184 void (*stop_send_beacons
) (struct net_device
*dev
);
2186 /* power save mode related */
2187 void (*sta_wake_up
) (struct net_device
*dev
);
2188 void (*ps_request_tx_ack
) (struct net_device
*dev
);
2189 void (*enter_sleep_state
) (struct net_device
*dev
, u32 th
, u32 tl
);
2190 short (*ps_is_queue_empty
) (struct net_device
*dev
);
2191 int (*handle_beacon
) (struct net_device
* dev
, struct ieee80211_beacon
* beacon
, struct ieee80211_network
* network
);
2192 int (*handle_assoc_response
) (struct net_device
* dev
, struct ieee80211_assoc_response_frame
* resp
, struct ieee80211_network
* network
);
2195 /* check whether Tx hw resouce available */
2196 short (*check_nic_enough_desc
)(struct net_device
*dev
, int queue_index
);
2197 //added by wb for HT related
2198 // void (*SwChnlByTimerHandler)(struct net_device *dev, int channel);
2199 void (*SetBWModeHandler
)(struct net_device
*dev
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2200 // void (*UpdateHalRATRTableHandler)(struct net_device* dev, u8* pMcsRate);
2201 bool (*GetNmodeSupportBySecCfg
)(struct net_device
* dev
);
2202 void (*SetWirelessMode
)(struct net_device
* dev
, u8 wireless_mode
);
2203 bool (*GetHalfNmodeSupportByAPsHandler
)(struct net_device
* dev
);
2204 void (*InitialGainHandler
)(struct net_device
*dev
, u8 Operation
);
2206 /* This must be the last item so that it points to the data
2207 * allocated beyond this structure by alloc_ieee80211 */
2211 #define IEEE_A (1<<0)
2212 #define IEEE_B (1<<1)
2213 #define IEEE_G (1<<2)
2214 #define IEEE_N_24G (1<<4)
2215 #define IEEE_N_5G (1<<5)
2216 #define IEEE_MODE_MASK (IEEE_A|IEEE_B|IEEE_G)
2218 /* Generate a 802.11 header */
2220 /* Uses the channel change callback directly
2221 * instead of [start/stop] scan callbacks
2223 #define IEEE_SOFTMAC_SCAN (1<<2)
2225 /* Perform authentication and association handshake */
2226 #define IEEE_SOFTMAC_ASSOCIATE (1<<3)
2228 /* Generate probe requests */
2229 #define IEEE_SOFTMAC_PROBERQ (1<<4)
2231 /* Generate respones to probe requests */
2232 #define IEEE_SOFTMAC_PROBERS (1<<5)
2234 /* The ieee802.11 stack will manages the netif queue
2235 * wake/stop for the driver, taking care of 802.11
2236 * fragmentation. See softmac.c for details. */
2237 #define IEEE_SOFTMAC_TX_QUEUE (1<<7)
2239 /* Uses only the softmac_data_hard_start_xmit
2240 * even for TX management frames.
2242 #define IEEE_SOFTMAC_SINGLE_QUEUE (1<<8)
2244 /* Generate beacons. The stack will enqueue beacons
2247 #define IEEE_SOFTMAC_BEACONS (1<<6)
2249 static inline void *ieee80211_priv(struct net_device
*dev
)
2251 return ((struct ieee80211_device
*)netdev_priv(dev
))->priv
;
2254 extern inline int ieee80211_is_empty_essid(const char *essid
, int essid_len
)
2256 /* Single white space is for Linksys APs */
2257 if (essid_len
== 1 && essid
[0] == ' ')
2260 /* Otherwise, if the entire essid is 0, we assume it is hidden */
2263 if (essid
[essid_len
] != '\0')
2270 extern inline int ieee80211_is_valid_mode(struct ieee80211_device
*ieee
, int mode
)
2273 * It is possible for both access points and our device to support
2274 * combinations of modes, so as long as there is one valid combination
2275 * of ap/device supported modes, then return success
2278 if ((mode
& IEEE_A
) &&
2279 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2280 (ieee
->freq_band
& IEEE80211_52GHZ_BAND
))
2283 if ((mode
& IEEE_G
) &&
2284 (ieee
->modulation
& IEEE80211_OFDM_MODULATION
) &&
2285 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2288 if ((mode
& IEEE_B
) &&
2289 (ieee
->modulation
& IEEE80211_CCK_MODULATION
) &&
2290 (ieee
->freq_band
& IEEE80211_24GHZ_BAND
))
2296 extern inline int ieee80211_get_hdrlen(u16 fc
)
2298 int hdrlen
= IEEE80211_3ADDR_LEN
;
2300 switch (WLAN_FC_GET_TYPE(fc
)) {
2301 case IEEE80211_FTYPE_DATA
:
2302 if ((fc
& IEEE80211_FCTL_FROMDS
) && (fc
& IEEE80211_FCTL_TODS
))
2303 hdrlen
= IEEE80211_4ADDR_LEN
; /* Addr4 */
2304 if(IEEE80211_QOS_HAS_SEQ(fc
))
2305 hdrlen
+= 2; /* QOS ctrl*/
2307 case IEEE80211_FTYPE_CTL
:
2308 switch (WLAN_FC_GET_STYPE(fc
)) {
2309 case IEEE80211_STYPE_CTS
:
2310 case IEEE80211_STYPE_ACK
:
2311 hdrlen
= IEEE80211_1ADDR_LEN
;
2314 hdrlen
= IEEE80211_2ADDR_LEN
;
2323 static inline u8
*ieee80211_get_payload(struct ieee80211_hdr
*hdr
)
2325 switch (ieee80211_get_hdrlen(le16_to_cpu(hdr
->frame_ctl
))) {
2326 case IEEE80211_1ADDR_LEN
:
2327 return ((struct ieee80211_hdr_1addr
*)hdr
)->payload
;
2328 case IEEE80211_2ADDR_LEN
:
2329 return ((struct ieee80211_hdr_2addr
*)hdr
)->payload
;
2330 case IEEE80211_3ADDR_LEN
:
2331 return ((struct ieee80211_hdr_3addr
*)hdr
)->payload
;
2332 case IEEE80211_4ADDR_LEN
:
2333 return ((struct ieee80211_hdr_4addr
*)hdr
)->payload
;
2338 static inline int ieee80211_is_ofdm_rate(u8 rate
)
2340 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2341 case IEEE80211_OFDM_RATE_6MB
:
2342 case IEEE80211_OFDM_RATE_9MB
:
2343 case IEEE80211_OFDM_RATE_12MB
:
2344 case IEEE80211_OFDM_RATE_18MB
:
2345 case IEEE80211_OFDM_RATE_24MB
:
2346 case IEEE80211_OFDM_RATE_36MB
:
2347 case IEEE80211_OFDM_RATE_48MB
:
2348 case IEEE80211_OFDM_RATE_54MB
:
2354 static inline int ieee80211_is_cck_rate(u8 rate
)
2356 switch (rate
& ~IEEE80211_BASIC_RATE_MASK
) {
2357 case IEEE80211_CCK_RATE_1MB
:
2358 case IEEE80211_CCK_RATE_2MB
:
2359 case IEEE80211_CCK_RATE_5MB
:
2360 case IEEE80211_CCK_RATE_11MB
:
2368 extern void free_ieee80211(struct net_device
*dev
);
2369 extern struct net_device
*alloc_ieee80211(int sizeof_priv
);
2371 extern int ieee80211_set_encryption(struct ieee80211_device
*ieee
);
2373 /* ieee80211_tx.c */
2375 extern int ieee80211_encrypt_fragment(
2376 struct ieee80211_device
*ieee
,
2377 struct sk_buff
*frag
,
2380 extern int ieee80211_xmit(struct sk_buff
*skb
,
2381 struct net_device
*dev
);
2382 extern void ieee80211_txb_free(struct ieee80211_txb
*);
2385 /* ieee80211_rx.c */
2386 extern int ieee80211_rx(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2387 struct ieee80211_rx_stats
*rx_stats
);
2388 extern void ieee80211_rx_mgt(struct ieee80211_device
*ieee
,
2389 struct ieee80211_hdr_4addr
*header
,
2390 struct ieee80211_rx_stats
*stats
);
2392 /* ieee80211_wx.c */
2393 extern int ieee80211_wx_get_scan(struct ieee80211_device
*ieee
,
2394 struct iw_request_info
*info
,
2395 union iwreq_data
*wrqu
, char *key
);
2396 extern int ieee80211_wx_set_encode(struct ieee80211_device
*ieee
,
2397 struct iw_request_info
*info
,
2398 union iwreq_data
*wrqu
, char *key
);
2399 extern int ieee80211_wx_get_encode(struct ieee80211_device
*ieee
,
2400 struct iw_request_info
*info
,
2401 union iwreq_data
*wrqu
, char *key
);
2402 #if WIRELESS_EXT >= 18
2403 extern int ieee80211_wx_get_encode_ext(struct ieee80211_device
*ieee
,
2404 struct iw_request_info
*info
,
2405 union iwreq_data
* wrqu
, char *extra
);
2406 extern int ieee80211_wx_set_encode_ext(struct ieee80211_device
*ieee
,
2407 struct iw_request_info
*info
,
2408 union iwreq_data
* wrqu
, char *extra
);
2409 extern int ieee80211_wx_set_auth(struct ieee80211_device
*ieee
,
2410 struct iw_request_info
*info
,
2411 struct iw_param
*data
, char *extra
);
2412 extern int ieee80211_wx_set_mlme(struct ieee80211_device
*ieee
,
2413 struct iw_request_info
*info
,
2414 union iwreq_data
*wrqu
, char *extra
);
2416 extern int ieee80211_wx_set_gen_ie(struct ieee80211_device
*ieee
, u8
*ie
, size_t len
);
2418 /* ieee80211_softmac.c */
2419 extern short ieee80211_is_54g(const struct ieee80211_network
*net
);
2420 extern short ieee80211_is_shortslot(const struct ieee80211_network
*net
);
2421 extern int ieee80211_rx_frame_softmac(struct ieee80211_device
*ieee
, struct sk_buff
*skb
,
2422 struct ieee80211_rx_stats
*rx_stats
, u16 type
,
2424 extern void ieee80211_softmac_new_net(struct ieee80211_device
*ieee
, struct ieee80211_network
*net
);
2426 void SendDisassociation(struct ieee80211_device
*ieee
, u8
* asSta
, u8 asRsn
);
2427 extern void ieee80211_softmac_xmit(struct ieee80211_txb
*txb
, struct ieee80211_device
*ieee
);
2429 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2430 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2431 extern void ieee80211_softmac_check_all_nets(struct ieee80211_device
*ieee
);
2432 extern void ieee80211_start_bss(struct ieee80211_device
*ieee
);
2433 extern void ieee80211_start_master_bss(struct ieee80211_device
*ieee
);
2434 extern void ieee80211_start_ibss(struct ieee80211_device
*ieee
);
2435 extern void ieee80211_softmac_init(struct ieee80211_device
*ieee
);
2436 extern void ieee80211_softmac_free(struct ieee80211_device
*ieee
);
2437 extern void ieee80211_associate_abort(struct ieee80211_device
*ieee
);
2438 extern void ieee80211_disassociate(struct ieee80211_device
*ieee
);
2439 extern void ieee80211_stop_scan(struct ieee80211_device
*ieee
);
2440 extern void ieee80211_start_scan_syncro(struct ieee80211_device
*ieee
);
2441 extern void ieee80211_check_all_nets(struct ieee80211_device
*ieee
);
2442 extern void ieee80211_start_protocol(struct ieee80211_device
*ieee
);
2443 extern void ieee80211_stop_protocol(struct ieee80211_device
*ieee
);
2444 extern void ieee80211_softmac_start_protocol(struct ieee80211_device
*ieee
);
2445 extern void ieee80211_softmac_stop_protocol(struct ieee80211_device
*ieee
);
2446 extern void ieee80211_reset_queue(struct ieee80211_device
*ieee
);
2447 extern void ieee80211_wake_queue(struct ieee80211_device
*ieee
);
2448 extern void ieee80211_stop_queue(struct ieee80211_device
*ieee
);
2449 extern struct sk_buff
*ieee80211_get_beacon(struct ieee80211_device
*ieee
);
2450 extern void ieee80211_start_send_beacons(struct ieee80211_device
*ieee
);
2451 extern void ieee80211_stop_send_beacons(struct ieee80211_device
*ieee
);
2452 extern int ieee80211_wpa_supplicant_ioctl(struct ieee80211_device
*ieee
, struct iw_point
*p
);
2453 extern void notify_wx_assoc_event(struct ieee80211_device
*ieee
);
2454 extern void ieee80211_ps_tx_ack(struct ieee80211_device
*ieee
, short success
);
2456 extern void softmac_mgmt_xmit(struct sk_buff
*skb
, struct ieee80211_device
*ieee
);
2458 /* ieee80211_crypt_ccmp&tkip&wep.c */
2459 extern void ieee80211_tkip_null(void);
2460 extern void ieee80211_wep_null(void);
2461 extern void ieee80211_ccmp_null(void);
2463 /* ieee80211_softmac_wx.c */
2465 extern int ieee80211_wx_get_wap(struct ieee80211_device
*ieee
,
2466 struct iw_request_info
*info
,
2467 union iwreq_data
*wrqu
, char *ext
);
2469 extern int ieee80211_wx_set_wap(struct ieee80211_device
*ieee
,
2470 struct iw_request_info
*info
,
2471 union iwreq_data
*awrq
,
2474 extern int ieee80211_wx_get_essid(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,union iwreq_data
*wrqu
,char *b
);
2476 extern int ieee80211_wx_set_rate(struct ieee80211_device
*ieee
,
2477 struct iw_request_info
*info
,
2478 union iwreq_data
*wrqu
, char *extra
);
2480 extern int ieee80211_wx_get_rate(struct ieee80211_device
*ieee
,
2481 struct iw_request_info
*info
,
2482 union iwreq_data
*wrqu
, char *extra
);
2484 extern int ieee80211_wx_set_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2485 union iwreq_data
*wrqu
, char *b
);
2487 extern int ieee80211_wx_set_scan(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2488 union iwreq_data
*wrqu
, char *b
);
2490 extern int ieee80211_wx_set_essid(struct ieee80211_device
*ieee
,
2491 struct iw_request_info
*a
,
2492 union iwreq_data
*wrqu
, char *extra
);
2494 extern int ieee80211_wx_get_mode(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2495 union iwreq_data
*wrqu
, char *b
);
2497 extern int ieee80211_wx_set_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2498 union iwreq_data
*wrqu
, char *b
);
2500 extern int ieee80211_wx_get_freq(struct ieee80211_device
*ieee
, struct iw_request_info
*a
,
2501 union iwreq_data
*wrqu
, char *b
);
2503 //extern void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee);
2504 extern void ieee80211_wx_sync_scan_wq(struct work_struct
*work
);
2507 extern int ieee80211_wx_set_rawtx(struct ieee80211_device
*ieee
,
2508 struct iw_request_info
*info
,
2509 union iwreq_data
*wrqu
, char *extra
);
2511 extern int ieee80211_wx_get_name(struct ieee80211_device
*ieee
,
2512 struct iw_request_info
*info
,
2513 union iwreq_data
*wrqu
, char *extra
);
2515 extern int ieee80211_wx_set_power(struct ieee80211_device
*ieee
,
2516 struct iw_request_info
*info
,
2517 union iwreq_data
*wrqu
, char *extra
);
2519 extern int ieee80211_wx_get_power(struct ieee80211_device
*ieee
,
2520 struct iw_request_info
*info
,
2521 union iwreq_data
*wrqu
, char *extra
);
2523 extern int ieee80211_wx_set_rts(struct ieee80211_device
*ieee
,
2524 struct iw_request_info
*info
,
2525 union iwreq_data
*wrqu
, char *extra
);
2527 extern int ieee80211_wx_get_rts(struct ieee80211_device
*ieee
,
2528 struct iw_request_info
*info
,
2529 union iwreq_data
*wrqu
, char *extra
);
2531 #define MAX_RECEIVE_BUFFER_SIZE 9100 //
2532 extern void HTDebugHTCapability(u8
* CapIE
, u8
* TitleString
);
2533 extern void HTDebugHTInfo(u8
* InfoIE
, u8
* TitleString
);
2535 void HTSetConnectBwMode(struct ieee80211_device
* ieee
, HT_CHANNEL_WIDTH Bandwidth
, HT_EXTCHNL_OFFSET Offset
);
2536 extern void HTUpdateDefaultSetting(struct ieee80211_device
* ieee
);
2537 extern void HTConstructCapabilityElement(struct ieee80211_device
* ieee
, u8
* posHTCap
, u8
* len
, u8 isEncrypt
);
2538 extern void HTConstructInfoElement(struct ieee80211_device
* ieee
, u8
* posHTInfo
, u8
* len
, u8 isEncrypt
);
2539 extern void HTConstructRT2RTAggElement(struct ieee80211_device
* ieee
, u8
* posRT2RTAgg
, u8
* len
);
2540 extern void HTOnAssocRsp(struct ieee80211_device
*ieee
);
2541 extern void HTInitializeHTInfo(struct ieee80211_device
* ieee
);
2542 extern void HTInitializeBssDesc(PBSS_HT pBssHT
);
2543 extern void HTResetSelfAndSavePeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2544 extern void HTUpdateSelfAndPeerSetting(struct ieee80211_device
* ieee
, struct ieee80211_network
* pNetwork
);
2545 extern u8
HTGetHighestMCSRate(struct ieee80211_device
* ieee
, u8
* pMCSRateSet
, u8
* pMCSFilter
);
2546 extern u8 MCS_FILTER_ALL
[];
2547 extern u16 MCS_DATA_RATE
[2][2][77] ;
2548 extern u8
HTCCheck(struct ieee80211_device
* ieee
, u8
* pFrame
);
2549 //extern void HTSetConnectBwModeCallback(unsigned long data);
2550 extern void HTResetIOTSetting(PRT_HIGH_THROUGHPUT pHTInfo
);
2551 extern bool IsHTHalfNmodeAPs(struct ieee80211_device
* ieee
);
2552 extern u16
HTHalfMcsToDataRate(struct ieee80211_device
* ieee
, u8 nMcsRate
);
2553 extern u16
HTMcsToDataRate( struct ieee80211_device
* ieee
, u8 nMcsRate
);
2554 extern u16
TxCountToDataRate( struct ieee80211_device
* ieee
, u8 nDataRate
);
2555 //function in BAPROC.c
2556 extern int ieee80211_rx_ADDBAReq( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2557 extern int ieee80211_rx_ADDBARsp( struct ieee80211_device
* ieee
, struct sk_buff
*skb
);
2558 extern int ieee80211_rx_DELBA(struct ieee80211_device
* ieee
,struct sk_buff
*skb
);
2559 extern void TsInitAddBA( struct ieee80211_device
* ieee
, PTX_TS_RECORD pTS
, u8 Policy
, u8 bOverwritePending
);
2560 extern void TsInitDelBA( struct ieee80211_device
* ieee
, PTS_COMMON_INFO pTsCommonInfo
, TR_SELECT TxRxSelect
);
2561 extern void BaSetupTimeOut(unsigned long data
);
2562 extern void TxBaInactTimeout(unsigned long data
);
2563 extern void RxBaInactTimeout(unsigned long data
);
2564 extern void ResetBaEntry( PBA_RECORD pBA
);
2567 struct ieee80211_device
* ieee
,
2568 PTS_COMMON_INFO
*ppTS
,
2571 TR_SELECT TxRxSelect
, //Rx:1, Tx:0
2574 extern void TSInitialize(struct ieee80211_device
*ieee
);
2575 extern void TsStartAddBaProcess(struct ieee80211_device
* ieee
, PTX_TS_RECORD pTxTS
);
2576 extern void RemovePeerTS(struct ieee80211_device
* ieee
, u8
* Addr
);
2577 extern void RemoveAllTS(struct ieee80211_device
* ieee
);
2578 void ieee80211_softmac_scan_syncro(struct ieee80211_device
*ieee
);
2580 extern const long ieee80211_wlan_frequencies
[];
2582 extern inline void ieee80211_increment_scans(struct ieee80211_device
*ieee
)
2587 extern inline int ieee80211_get_scans(struct ieee80211_device
*ieee
)
2592 static inline const char *escape_essid(const char *essid
, u8 essid_len
) {
2593 static char escaped
[IW_ESSID_MAX_SIZE
* 2 + 1];
2594 const char *s
= essid
;
2597 if (ieee80211_is_empty_essid(essid
, essid_len
)) {
2598 memcpy(escaped
, "<hidden>", sizeof("<hidden>"));
2602 essid_len
= min(essid_len
, (u8
)IW_ESSID_MAX_SIZE
);
2603 while (essid_len
--) {
2616 /* For the function is more related to hardware setting, it's better to use the
2617 * ieee handler to refer to it.
2619 extern short check_nic_enough_desc(struct net_device
*dev
, int queue_index
);
2620 extern int ieee80211_data_xmit(struct sk_buff
*skb
, struct net_device
*dev
);
2621 extern int ieee80211_parse_info_param(struct ieee80211_device
*ieee
,
2622 struct ieee80211_info_element
*info_element
,
2624 struct ieee80211_network
*network
,
2625 struct ieee80211_rx_stats
*stats
);
2627 void ieee80211_indicate_packets(struct ieee80211_device
*ieee
, struct ieee80211_rxb
** prxbIndicateArray
,u8 index
);
2628 #define RT_ASOC_RETRY_LIMIT 5
2629 #endif /* IEEE80211_H */