drivers/usb/host/ohci-pci.c

   1 /*
   2  * OHCI HCD (Host Controller Driver) for USB.
   3  *
   4  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
   5  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
   6  *
   7  * [ Initialisation is based on Linus'  ]
   8  * [ uhci code and gregs ohci fragments ]
   9  * [ (C) Copyright 1999 Linus Torvalds  ]
  10  * [ (C) Copyright 1999 Gregory P. Smith]
  11  *
  12  * PCI Bus Glue
  13  *
  14  * This file is licenced under the GPL.
  15  */
  16
  17 #ifndef CONFIG_PCI
  18 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
  19 #endif
  20
  21 #include <linux/pci.h>
  22 #include <linux/io.h>
  23
  24
  25 /*-------------------------------------------------------------------------*/
  26
  27 static int broken_suspend(struct usb_hcd *hcd)
  28 {
  29         device_init_wakeup(&hcd->self.root_hub->dev, 0);
  30         return 0;
  31 }
  32
  33 /* AMD 756, for most chips (early revs), corrupts register
  34  * values on read ... so enable the vendor workaround.
  35  */
  36 static int ohci_quirk_amd756(struct usb_hcd *hcd)
  37 {
  38         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  39
  40         ohci->flags = OHCI_QUIRK_AMD756;
  41         ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
  42
  43         /* also erratum 10 (suspend/resume issues) */
  44         return broken_suspend(hcd);
  45 }
  46
  47 /* Apple's OHCI driver has a lot of bizarre workarounds
  48  * for this chip.  Evidently control and bulk lists
  49  * can get confused.  (B&W G3 models, and ...)
  50  */
  51 static int ohci_quirk_opti(struct usb_hcd *hcd)
  52 {
  53         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  54
  55         ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
  56
  57         return 0;
  58 }
  59
  60 /* Check for NSC87560. We have to look at the bridge (fn1) to
  61  * identify the USB (fn2). This quirk might apply to more or
  62  * even all NSC stuff.
  63  */
  64 static int ohci_quirk_ns(struct usb_hcd *hcd)
  65 {
  66         struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
  67         struct pci_dev  *b;
  68
  69         b  = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
  70         if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
  71             && b->vendor == PCI_VENDOR_ID_NS) {
  72                 struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  73
  74                 ohci->flags |= OHCI_QUIRK_SUPERIO;
  75                 ohci_dbg (ohci, "Using NSC SuperIO setup\n");
  76         }
  77         pci_dev_put(b);
  78
  79         return 0;
  80 }
  81
  82 /* Check for Compaq's ZFMicro chipset, which needs short
  83  * delays before control or bulk queues get re-activated
  84  * in finish_unlinks()
  85  */
  86 static int ohci_quirk_zfmicro(struct usb_hcd *hcd)
  87 {
  88         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
  89
  90         ohci->flags |= OHCI_QUIRK_ZFMICRO;
  91         ohci_dbg(ohci, "enabled Compaq ZFMicro chipset quirks\n");
  92
  93         return 0;
  94 }
  95
  96 /* Check for Toshiba SCC OHCI which has big endian registers
  97  * and little endian in memory data structures
  98  */
  99 static int ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
 100 {
 101         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 102
 103         /* That chip is only present in the southbridge of some
 104          * cell based platforms which are supposed to select
 105          * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
 106          * that was the case though.
 107          */
 108 #ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
 109         ohci->flags |= OHCI_QUIRK_BE_MMIO;
 110         ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
 111         return 0;
 112 #else
 113         ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
 114         return -ENXIO;
 115 #endif
 116 }
 117
 118 /* Check for NEC chip and apply quirk for allegedly lost interrupts.
 119  */
 120
 121 static void ohci_quirk_nec_worker(struct work_struct *work)
 122 {
 123         struct ohci_hcd *ohci = container_of(work, struct ohci_hcd, nec_work);
 124         int status;
 125
 126         status = ohci_init(ohci);
 127         if (status != 0) {
 128                 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
 129                          "ohci_init", status);
 130                 return;
 131         }
 132
 133         status = ohci_restart(ohci);
 134         if (status != 0)
 135                 ohci_err(ohci, "Restarting NEC controller failed in %s, %d\n",
 136                          "ohci_restart", status);
 137 }
 138
 139 static int ohci_quirk_nec(struct usb_hcd *hcd)
 140 {
 141         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 142
 143         ohci->flags |= OHCI_QUIRK_NEC;
 144         INIT_WORK(&ohci->nec_work, ohci_quirk_nec_worker);
 145         ohci_dbg (ohci, "enabled NEC chipset lost interrupt quirk\n");
 146
 147         return 0;
 148 }
 149
 150 static int ohci_quirk_amd700(struct usb_hcd *hcd)
 151 {
 152         struct ohci_hcd *ohci = hcd_to_ohci(hcd);
 153         struct pci_dev *amd_smbus_dev;
 154         u8 rev;
 155
 156         if (usb_amd_find_chipset_info())
 157                 ohci->flags |= OHCI_QUIRK_AMD_PLL;
 158
 159         amd_smbus_dev = pci_get_device(PCI_VENDOR_ID_ATI,
 160                         PCI_DEVICE_ID_ATI_SBX00_SMBUS, NULL);
 161         if (!amd_smbus_dev)
 162                 return 0;
 163
 164         rev = amd_smbus_dev->revision;
 165
 166         /* SB800 needs pre-fetch fix */
 167         if ((rev >= 0x40) && (rev <= 0x4f)) {
 168                 ohci->flags |= OHCI_QUIRK_AMD_PREFETCH;
 169                 ohci_dbg(ohci, "enabled AMD prefetch quirk\n");
 170         }
 171
 172         pci_dev_put(amd_smbus_dev);
 173         amd_smbus_dev = NULL;
 174
 175         return 0;
 176 }
 177
 178 static void sb800_prefetch(struct ohci_hcd *ohci, int on)
 179 {
 180         struct pci_dev *pdev;
 181         u16 misc;
 182
 183         pdev = to_pci_dev(ohci_to_hcd(ohci)->self.controller);
 184         pci_read_config_word(pdev, 0x50, &misc);
 185         if (on == 0)
 186                 pci_write_config_word(pdev, 0x50, misc & 0xfcff);
 187         else
 188                 pci_write_config_word(pdev, 0x50, misc | 0x0300);
 189 }
 190
 191 /* List of quirks for OHCI */
 192 static const struct pci_device_id ohci_pci_quirks[] = {
 193         {
 194                 PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
 195                 .driver_data = (unsigned long)ohci_quirk_amd756,
 196         },
 197         {
 198                 PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
 199                 .driver_data = (unsigned long)ohci_quirk_opti,
 200         },
 201         {
 202                 PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
 203                 .driver_data = (unsigned long)ohci_quirk_ns,
 204         },
 205         {
 206                 PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
 207                 .driver_data = (unsigned long)ohci_quirk_zfmicro,
 208         },
 209         {
 210                 PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
 211                 .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
 212         },
 213         {
 214                 PCI_DEVICE(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB),
 215                 .driver_data = (unsigned long)ohci_quirk_nec,
 216         },
 217         {
 218                 /* Toshiba portege 4000 */
 219                 .vendor         = PCI_VENDOR_ID_AL,
 220                 .device         = 0x5237,
 221                 .subvendor      = PCI_VENDOR_ID_TOSHIBA,
 222                 .subdevice      = 0x0004,
 223                 .driver_data    = (unsigned long) broken_suspend,
 224         },
 225         {
 226                 PCI_DEVICE(PCI_VENDOR_ID_ITE, 0x8152),
 227                 .driver_data = (unsigned long) broken_suspend,
 228         },
 229         {
 230                 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4397),
 231                 .driver_data = (unsigned long)ohci_quirk_amd700,
 232         },
 233         {
 234                 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4398),
 235                 .driver_data = (unsigned long)ohci_quirk_amd700,
 236         },
 237         {
 238                 PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399),
 239                 .driver_data = (unsigned long)ohci_quirk_amd700,
 240         },
 241
 242         /* FIXME for some of the early AMD 760 southbridges, OHCI
 243          * won't work at all.  blacklist them.
 244          */
 245
 246         {},
 247 };
 248
 249 static int ohci_pci_reset (struct usb_hcd *hcd)
 250 {
 251         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 252         int ret = 0;
 253
 254         if (hcd->self.controller) {
 255                 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 256                 const struct pci_device_id *quirk_id;
 257
 258                 quirk_id = pci_match_id(ohci_pci_quirks, pdev);
 259                 if (quirk_id != NULL) {
 260                         int (*quirk)(struct usb_hcd *ohci);
 261                         quirk = (void *)quirk_id->driver_data;
 262                         ret = quirk(hcd);
 263                 }
 264         }
 265         if (ret == 0) {
 266                 ohci_hcd_init (ohci);
 267                 return ohci_init (ohci);
 268         }
 269         return ret;
 270 }
 271
 272
 273 static int __devinit ohci_pci_start (struct usb_hcd *hcd)
 274 {
 275         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 276         int             ret;
 277
 278 #ifdef CONFIG_PM /* avoid warnings about unused pdev */
 279         if (hcd->self.controller) {
 280                 struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
 281
 282                 /* RWC may not be set for add-in PCI cards, since boot
 283                  * firmware probably ignored them.  This transfers PCI
 284                  * PM wakeup capabilities.
 285                  */
 286                 if (device_can_wakeup(&pdev->dev))
 287                         ohci->hc_control |= OHCI_CTRL_RWC;
 288         }
 289 #endif /* CONFIG_PM */
 290
 291         ret = ohci_run (ohci);
 292         if (ret < 0) {
 293                 ohci_err (ohci, "can't start\n");
 294                 ohci_stop (hcd);
 295         }
 296         return ret;
 297 }
 298
 299 #ifdef  CONFIG_PM
 300
 301 static int ohci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 302 {
 303         struct ohci_hcd *ohci = hcd_to_ohci (hcd);
 304         unsigned long   flags;
 305         int             rc = 0;
 306
 307         /* Root hub was already suspended. Disable irq emission and
 308          * mark HW unaccessible, bail out if RH has been resumed. Use
 309          * the spinlock to properly synchronize with possible pending
 310          * RH suspend or resume activity.
 311          */
 312         spin_lock_irqsave (&ohci->lock, flags);
 313         if (ohci->rh_state != OHCI_RH_SUSPENDED) {
 314                 rc = -EINVAL;
 315                 goto bail;
 316         }
 317         ohci_writel(ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable);
 318         (void)ohci_readl(ohci, &ohci->regs->intrdisable);
 319
 320         clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 321  bail:
 322         spin_unlock_irqrestore (&ohci->lock, flags);
 323
 324         return rc;
 325 }
 326
 327
 328 static int ohci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 329 {
 330         set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 331
 332         /* Make sure resume from hibernation re-enumerates everything */
 333         if (hibernated)
 334                 ohci_usb_reset(hcd_to_ohci(hcd));
 335
 336         ohci_finish_controller_resume(hcd);
 337         return 0;
 338 }
 339
 340 #endif  /* CONFIG_PM */
 341
 342
 343 /*-------------------------------------------------------------------------*/
 344
 345 static const struct hc_driver ohci_pci_hc_driver = {
 346         .description =          hcd_name,
 347         .product_desc =         "OHCI Host Controller",
 348         .hcd_priv_size =        sizeof(struct ohci_hcd),
 349
 350         /*
 351          * generic hardware linkage
 352          */
 353         .irq =                  ohci_irq,
 354         .flags =                HCD_MEMORY | HCD_USB11,
 355
 356         /*
 357          * basic lifecycle operations
 358          */
 359         .reset =                ohci_pci_reset,
 360         .start =                ohci_pci_start,
 361         .stop =                 ohci_stop,
 362         .shutdown =             ohci_shutdown,
 363
 364 #ifdef  CONFIG_PM
 365         .pci_suspend =          ohci_pci_suspend,
 366         .pci_resume =           ohci_pci_resume,
 367 #endif
 368
 369         /*
 370          * managing i/o requests and associated device resources
 371          */
 372         .urb_enqueue =          ohci_urb_enqueue,
 373         .urb_dequeue =          ohci_urb_dequeue,
 374         .endpoint_disable =     ohci_endpoint_disable,
 375
 376         /*
 377          * scheduling support
 378          */
 379         .get_frame_number =     ohci_get_frame,
 380
 381         /*
 382          * root hub support
 383          */
 384         .hub_status_data =      ohci_hub_status_data,
 385         .hub_control =          ohci_hub_control,
 386 #ifdef  CONFIG_PM
 387         .bus_suspend =          ohci_bus_suspend,
 388         .bus_resume =           ohci_bus_resume,
 389 #endif
 390         .start_port_reset =     ohci_start_port_reset,
 391 };
 392
 393 /*-------------------------------------------------------------------------*/
 394
 395
 396 static const struct pci_device_id pci_ids [] = { {
 397         /* handle any USB OHCI controller */
 398         PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0),
 399         .driver_data =  (unsigned long) &ohci_pci_hc_driver,
 400         }, {
 401         /* The device in the ConneXT I/O hub has no class reg */
 402         PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI),
 403         .driver_data =  (unsigned long) &ohci_pci_hc_driver,
 404         }, { /* end: all zeroes */ }
 405 };
 406 MODULE_DEVICE_TABLE (pci, pci_ids);
 407
 408 /* pci driver glue; this is a "new style" PCI driver module */
 409 static struct pci_driver ohci_pci_driver = {
 410         .name =         (char *) hcd_name,
 411         .id_table =     pci_ids,
 412
 413         .probe =        usb_hcd_pci_probe,
 414         .remove =       usb_hcd_pci_remove,
 415         .shutdown =     usb_hcd_pci_shutdown,
 416
 417 #ifdef CONFIG_PM_SLEEP
 418         .driver =       {
 419                 .pm =   &usb_hcd_pci_pm_ops
 420         },
 421 #endif
 422 };