drivers/usb/renesas_usbhs/common.h

   1 /*
   2  * Renesas USB driver
   3  *
   4  * Copyright (C) 2011 Renesas Solutions Corp.
   5  * Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
   6  *
   7  * This program is distributed in the hope that it will be useful,
   8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
   9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10  * GNU General Public License for more details.
  11  *
  12  * You should have received a copy of the GNU General Public License
  13  * along with this program; if not, write to the Free Software
  14  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  15  *
  16  */
  17 #ifndef RENESAS_USB_DRIVER_H
  18 #define RENESAS_USB_DRIVER_H
  19
  20 #include <linux/platform_device.h>
  21 #include <linux/usb/renesas_usbhs.h>
  22
  23 struct usbhs_priv;
  24
  25 #include "./mod.h"
  26 #include "./pipe.h"
  27
  28 /*
  29  *
  30  *              register define
  31  *
  32  */
  33 #define SYSCFG          0x0000
  34 #define BUSWAIT         0x0002
  35 #define DVSTCTR         0x0008
  36 #define TESTMODE        0x000C
  37 #define CFIFO           0x0014
  38 #define CFIFOSEL        0x0020
  39 #define CFIFOCTR        0x0022
  40 #define D0FIFO          0x0100
  41 #define D0FIFOSEL       0x0028
  42 #define D0FIFOCTR       0x002A
  43 #define D1FIFO          0x0120
  44 #define D1FIFOSEL       0x002C
  45 #define D1FIFOCTR       0x002E
  46 #define INTENB0         0x0030
  47 #define INTENB1         0x0032
  48 #define BRDYENB         0x0036
  49 #define NRDYENB         0x0038
  50 #define BEMPENB         0x003A
  51 #define INTSTS0         0x0040
  52 #define INTSTS1         0x0042
  53 #define BRDYSTS         0x0046
  54 #define NRDYSTS         0x0048
  55 #define BEMPSTS         0x004A
  56 #define FRMNUM          0x004C
  57 #define USBREQ          0x0054  /* USB request type register */
  58 #define USBVAL          0x0056  /* USB request value register */
  59 #define USBINDX         0x0058  /* USB request index register */
  60 #define USBLENG         0x005A  /* USB request length register */
  61 #define DCPCFG          0x005C
  62 #define DCPMAXP         0x005E
  63 #define DCPCTR          0x0060
  64 #define PIPESEL         0x0064
  65 #define PIPECFG         0x0068
  66 #define PIPEBUF         0x006A
  67 #define PIPEMAXP        0x006C
  68 #define PIPEPERI        0x006E
  69 #define PIPEnCTR        0x0070
  70 #define PIPE1TRE        0x0090
  71 #define PIPE1TRN        0x0092
  72 #define PIPE2TRE        0x0094
  73 #define PIPE2TRN        0x0096
  74 #define PIPE3TRE        0x0098
  75 #define PIPE3TRN        0x009A
  76 #define PIPE4TRE        0x009C
  77 #define PIPE4TRN        0x009E
  78 #define PIPE5TRE        0x00A0
  79 #define PIPE5TRN        0x00A2
  80 #define PIPEBTRE        0x00A4
  81 #define PIPEBTRN        0x00A6
  82 #define PIPECTRE        0x00A8
  83 #define PIPECTRN        0x00AA
  84 #define PIPEDTRE        0x00AC
  85 #define PIPEDTRN        0x00AE
  86 #define PIPEETRE        0x00B0
  87 #define PIPEETRN        0x00B2
  88 #define PIPEFTRE        0x00B4
  89 #define PIPEFTRN        0x00B6
  90 #define PIPE9TRE        0x00B8
  91 #define PIPE9TRN        0x00BA
  92 #define PIPEATRE        0x00BC
  93 #define PIPEATRN        0x00BE
  94 #define DEVADD0         0x00D0 /* Device address n configuration */
  95 #define DEVADD1         0x00D2
  96 #define DEVADD2         0x00D4
  97 #define DEVADD3         0x00D6
  98 #define DEVADD4         0x00D8
  99 #define DEVADD5         0x00DA
 100 #define DEVADD6         0x00DC
 101 #define DEVADD7         0x00DE
 102 #define DEVADD8         0x00E0
 103 #define DEVADD9         0x00E2
 104 #define DEVADDA         0x00E4
 105
 106 /* SYSCFG */
 107 #define SCKE    (1 << 10)       /* USB Module Clock Enable */
 108 #define HSE     (1 << 7)        /* High-Speed Operation Enable */
 109 #define DCFM    (1 << 6)        /* Controller Function Select */
 110 #define DRPD    (1 << 5)        /* D+ Line/D- Line Resistance Control */
 111 #define DPRPU   (1 << 4)        /* D+ Line Resistance Control */
 112 #define USBE    (1 << 0)        /* USB Module Operation Enable */
 113
 114 /* DVSTCTR */
 115 #define EXTLP   (1 << 10)       /* Controls the EXTLP pin output state */
 116 #define PWEN    (1 << 9)        /* Controls the PWEN pin output state */
 117 #define USBRST  (1 << 6)        /* Bus Reset Output */
 118 #define UACT    (1 << 4)        /* USB Bus Enable */
 119 #define RHST    (0x7)           /* Reset Handshake */
 120 #define  RHST_LOW_SPEED  1      /* Low-speed connection */
 121 #define  RHST_FULL_SPEED 2      /* Full-speed connection */
 122 #define  RHST_HIGH_SPEED 3      /* High-speed connection */
 123
 124 /* CFIFOSEL */
 125 #define DREQE   (1 << 12)       /* DMA Transfer Request Enable */
 126 #define MBW_32  (0x2 << 10)     /* CFIFO Port Access Bit Width */
 127
 128 /* CFIFOCTR */
 129 #define BVAL    (1 << 15)       /* Buffer Memory Enable Flag */
 130 #define BCLR    (1 << 14)       /* CPU buffer clear */
 131 #define FRDY    (1 << 13)       /* FIFO Port Ready */
 132 #define DTLN_MASK (0x0FFF)      /* Receive Data Length */
 133
 134 /* INTENB0 */
 135 #define VBSE    (1 << 15)       /* Enable IRQ VBUS_0 and VBUSIN_0 */
 136 #define RSME    (1 << 14)       /* Enable IRQ Resume */
 137 #define SOFE    (1 << 13)       /* Enable IRQ Frame Number Update */
 138 #define DVSE    (1 << 12)       /* Enable IRQ Device State Transition */
 139 #define CTRE    (1 << 11)       /* Enable IRQ Control Stage Transition */
 140 #define BEMPE   (1 << 10)       /* Enable IRQ Buffer Empty */
 141 #define NRDYE   (1 << 9)        /* Enable IRQ Buffer Not Ready Response */
 142 #define BRDYE   (1 << 8)        /* Enable IRQ Buffer Ready */
 143
 144 /* INTENB1 */
 145 #define BCHGE   (1 << 14)       /* USB Bus Change Interrupt Enable */
 146 #define DTCHE   (1 << 12)       /* Disconnection Detect Interrupt Enable */
 147 #define ATTCHE  (1 << 11)       /* Connection Detect Interrupt Enable */
 148 #define EOFERRE (1 << 6)        /* EOF Error Detect Interrupt Enable */
 149 #define SIGNE   (1 << 5)        /* Setup Transaction Error Interrupt Enable */
 150 #define SACKE   (1 << 4)        /* Setup Transaction ACK Interrupt Enable */
 151
 152 /* INTSTS0 */
 153 #define VBINT   (1 << 15)       /* VBUS0_0 and VBUS1_0 Interrupt Status */
 154 #define DVST    (1 << 12)       /* Device State Transition Interrupt Status */
 155 #define CTRT    (1 << 11)       /* Control Stage Interrupt Status */
 156 #define BEMP    (1 << 10)       /* Buffer Empty Interrupt Status */
 157 #define BRDY    (1 << 8)        /* Buffer Ready Interrupt Status */
 158 #define VBSTS   (1 << 7)        /* VBUS_0 and VBUSIN_0 Input Status */
 159 #define VALID   (1 << 3)        /* USB Request Receive */
 160
 161 #define DVSQ_MASK               (0x3 << 4)      /* Device State */
 162 #define  POWER_STATE            (0 << 4)
 163 #define  DEFAULT_STATE          (1 << 4)
 164 #define  ADDRESS_STATE          (2 << 4)
 165 #define  CONFIGURATION_STATE    (3 << 4)
 166
 167 #define CTSQ_MASK               (0x7)   /* Control Transfer Stage */
 168 #define  IDLE_SETUP_STAGE       0       /* Idle stage or setup stage */
 169 #define  READ_DATA_STAGE        1       /* Control read data stage */
 170 #define  READ_STATUS_STAGE      2       /* Control read status stage */
 171 #define  WRITE_DATA_STAGE       3       /* Control write data stage */
 172 #define  WRITE_STATUS_STAGE     4       /* Control write status stage */
 173 #define  NODATA_STATUS_STAGE    5       /* Control write NoData status stage */
 174 #define  SEQUENCE_ERROR         6       /* Control transfer sequence error */
 175
 176 /* INTSTS1 */
 177 #define OVRCR   (1 << 15) /* OVRCR Interrupt Status */
 178 #define BCHG    (1 << 14) /* USB Bus Change Interrupt Status */
 179 #define DTCH    (1 << 12) /* USB Disconnection Detect Interrupt Status */
 180 #define ATTCH   (1 << 11) /* ATTCH Interrupt Status */
 181 #define EOFERR  (1 << 6)  /* EOF Error Detect Interrupt Status */
 182 #define SIGN    (1 << 5)  /* Setup Transaction Error Interrupt Status */
 183 #define SACK    (1 << 4)  /* Setup Transaction ACK Response Interrupt Status */
 184
 185 /* PIPECFG */
 186 /* DCPCFG */
 187 #define TYPE_NONE       (0 << 14)       /* Transfer Type */
 188 #define TYPE_BULK       (1 << 14)
 189 #define TYPE_INT        (2 << 14)
 190 #define TYPE_ISO        (3 << 14)
 191 #define DBLB            (1 << 9)        /* Double Buffer Mode */
 192 #define SHTNAK          (1 << 7)        /* Pipe Disable in Transfer End */
 193 #define DIR_OUT         (1 << 4)        /* Transfer Direction */
 194
 195 /* PIPEMAXP */
 196 /* DCPMAXP */
 197 #define DEVSEL_MASK     (0xF << 12)     /* Device Select */
 198 #define DCP_MAXP_MASK   (0x7F)
 199 #define PIPE_MAXP_MASK  (0x7FF)
 200
 201 /* PIPEBUF */
 202 #define BUFSIZE_SHIFT   10
 203 #define BUFSIZE_MASK    (0x1F << BUFSIZE_SHIFT)
 204 #define BUFNMB_MASK     (0xFF)
 205
 206 /* PIPEnCTR */
 207 /* DCPCTR */
 208 #define BSTS            (1 << 15)       /* Buffer Status */
 209 #define SUREQ           (1 << 14)       /* Sending SETUP Token */
 210 #define CSSTS           (1 << 12)       /* CSSTS Status */
 211 #define ACLRM           (1 << 9)        /* Buffer Auto-Clear Mode */
 212 #define SQCLR           (1 << 8)        /* Toggle Bit Clear */
 213 #define SQSET           (1 << 7)        /* Toggle Bit Set */
 214 #define PBUSY           (1 << 5)        /* Pipe Busy */
 215 #define PID_MASK        (0x3)           /* Response PID */
 216 #define  PID_NAK        0
 217 #define  PID_BUF        1
 218 #define  PID_STALL10    2
 219 #define  PID_STALL11    3
 220
 221 #define CCPL            (1 << 2)        /* Control Transfer End Enable */
 222
 223 /* PIPEnTRE */
 224 #define TRENB           (1 << 9)        /* Transaction Counter Enable */
 225 #define TRCLR           (1 << 8)        /* Transaction Counter Clear */
 226
 227 /* FRMNUM */
 228 #define FRNM_MASK       (0x7FF)
 229
 230 /* DEVADDn */
 231 #define UPPHUB(x)       (((x) & 0xF) << 11)     /* HUB Register */
 232 #define HUBPORT(x)      (((x) & 0x7) << 8)      /* HUB Port for Target Device */
 233 #define USBSPD(x)       (((x) & 0x3) << 6)      /* Device Transfer Rate */
 234 #define USBSPD_SPEED_LOW        0x1
 235 #define USBSPD_SPEED_FULL       0x2
 236 #define USBSPD_SPEED_HIGH       0x3
 237
 238 /*
 239  *              struct
 240  */
 241 struct usbhs_priv {
 242
 243         void __iomem *base;
 244         unsigned int irq;
 245
 246         struct renesas_usbhs_platform_callback  pfunc;
 247         struct renesas_usbhs_driver_param       dparam;
 248
 249         struct delayed_work notify_hotplug_work;
 250         struct platform_device *pdev;
 251
 252         spinlock_t              lock;
 253
 254         u32 flags;
 255
 256         /*
 257          * module control
 258          */
 259         struct usbhs_mod_info mod_info;
 260
 261         /*
 262          * pipe control
 263          */
 264         struct usbhs_pipe_info pipe_info;
 265
 266         /*
 267          * fifo control
 268          */
 269         struct usbhs_fifo_info fifo_info;
 270 };
 271
 272 /*
 273  * common
 274  */
 275 u16 usbhs_read(struct usbhs_priv *priv, u32 reg);
 276 void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data);
 277 void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data);
 278
 279 #define usbhs_lock(p, f) spin_lock_irqsave(usbhs_priv_to_lock(p), f)
 280 #define usbhs_unlock(p, f) spin_unlock_irqrestore(usbhs_priv_to_lock(p), f)
 281
 282 /*
 283  * sysconfig
 284  */
 285 void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable);
 286 void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable);
 287 void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode);
 288
 289 /*
 290  * usb request
 291  */
 292 void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
 293 void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req);
 294
 295 /*
 296  * bus
 297  */
 298 void usbhs_bus_send_sof_enable(struct usbhs_priv *priv);
 299 void usbhs_bus_send_reset(struct usbhs_priv *priv);
 300 int usbhs_bus_get_speed(struct usbhs_priv *priv);
 301 int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable);
 302
 303 /*
 304  * frame
 305  */
 306 int usbhs_frame_get_num(struct usbhs_priv *priv);
 307
 308 /*
 309  * device config
 310  */
 311 int usbhs_set_device_config(struct usbhs_priv *priv, int devnum, u16 upphub,
 312                            u16 hubport, u16 speed);
 313
 314 /*
 315  * data
 316  */
 317 struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev);
 318 #define usbhs_get_dparam(priv, param)   (priv->dparam.param)
 319 #define usbhs_priv_to_pdev(priv)        (priv->pdev)
 320 #define usbhs_priv_to_dev(priv)         (&priv->pdev->dev)
 321 #define usbhs_priv_to_lock(priv)        (&priv->lock)
 322
 323 #endif /* RENESAS_USB_DRIVER_H */