Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / drivers / video / omap / sossi.c
blobf79c137753d708f0130031fd32b99e5a6e0469e0
1 /*
2 * OMAP1 Special OptimiSed Screen Interface support
4 * Copyright (C) 2004-2005 Nokia Corporation
5 * Author: Juha Yrjölä <juha.yrjola@nokia.com>
7 * This program is free software; you can redistribute it and/or modify it
8 * under the terms of the GNU General Public License as published by the
9 * Free Software Foundation; either version 2 of the License, or (at your
10 * option) any later version.
12 * This program is distributed in the hope that it will be useful, but
13 * WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
15 * General Public License for more details.
17 * You should have received a copy of the GNU General Public License along
18 * with this program; if not, write to the Free Software Foundation, Inc.,
19 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
21 #include <linux/module.h>
22 #include <linux/mm.h>
23 #include <linux/clk.h>
24 #include <linux/irq.h>
25 #include <linux/io.h>
26 #include <linux/interrupt.h>
28 #include <plat/dma.h>
30 #include "omapfb.h"
31 #include "lcdc.h"
33 #define MODULE_NAME "omapfb-sossi"
35 #define OMAP_SOSSI_BASE 0xfffbac00
36 #define SOSSI_ID_REG 0x00
37 #define SOSSI_INIT1_REG 0x04
38 #define SOSSI_INIT2_REG 0x08
39 #define SOSSI_INIT3_REG 0x0c
40 #define SOSSI_FIFO_REG 0x10
41 #define SOSSI_REOTABLE_REG 0x14
42 #define SOSSI_TEARING_REG 0x18
43 #define SOSSI_INIT1B_REG 0x1c
44 #define SOSSI_FIFOB_REG 0x20
46 #define DMA_GSCR 0xfffedc04
47 #define DMA_LCD_CCR 0xfffee3c2
48 #define DMA_LCD_CTRL 0xfffee3c4
49 #define DMA_LCD_LCH_CTRL 0xfffee3ea
51 #define CONF_SOSSI_RESET_R (1 << 23)
53 #define RD_ACCESS 0
54 #define WR_ACCESS 1
56 #define SOSSI_MAX_XMIT_BYTES (512 * 1024)
58 static struct {
59 void __iomem *base;
60 struct clk *fck;
61 unsigned long fck_hz;
62 spinlock_t lock;
63 int bus_pick_count;
64 int bus_pick_width;
65 int tearsync_mode;
66 int tearsync_line;
67 void (*lcdc_callback)(void *data);
68 void *lcdc_callback_data;
69 int vsync_dma_pending;
70 /* timing for read and write access */
71 int clk_div;
72 u8 clk_tw0[2];
73 u8 clk_tw1[2];
75 * if last_access is the same as current we don't have to change
76 * the timings
78 int last_access;
80 struct omapfb_device *fbdev;
81 } sossi;
83 static inline u32 sossi_read_reg(int reg)
85 return readl(sossi.base + reg);
88 static inline u16 sossi_read_reg16(int reg)
90 return readw(sossi.base + reg);
93 static inline u8 sossi_read_reg8(int reg)
95 return readb(sossi.base + reg);
98 static inline void sossi_write_reg(int reg, u32 value)
100 writel(value, sossi.base + reg);
103 static inline void sossi_write_reg16(int reg, u16 value)
105 writew(value, sossi.base + reg);
108 static inline void sossi_write_reg8(int reg, u8 value)
110 writeb(value, sossi.base + reg);
113 static void sossi_set_bits(int reg, u32 bits)
115 sossi_write_reg(reg, sossi_read_reg(reg) | bits);
118 static void sossi_clear_bits(int reg, u32 bits)
120 sossi_write_reg(reg, sossi_read_reg(reg) & ~bits);
123 #define HZ_TO_PS(x) (1000000000 / (x / 1000))
125 static u32 ps_to_sossi_ticks(u32 ps, int div)
127 u32 clk_period = HZ_TO_PS(sossi.fck_hz) * div;
128 return (clk_period + ps - 1) / clk_period;
131 static int calc_rd_timings(struct extif_timings *t)
133 u32 tw0, tw1;
134 int reon, reoff, recyc, actim;
135 int div = t->clk_div;
138 * Make sure that after conversion it still holds that:
139 * reoff > reon, recyc >= reoff, actim > reon
141 reon = ps_to_sossi_ticks(t->re_on_time, div);
142 /* reon will be exactly one sossi tick */
143 if (reon > 1)
144 return -1;
146 reoff = ps_to_sossi_ticks(t->re_off_time, div);
148 if (reoff <= reon)
149 reoff = reon + 1;
151 tw0 = reoff - reon;
152 if (tw0 > 0x10)
153 return -1;
155 recyc = ps_to_sossi_ticks(t->re_cycle_time, div);
156 if (recyc <= reoff)
157 recyc = reoff + 1;
159 tw1 = recyc - tw0;
160 /* values less then 3 result in the SOSSI block resetting itself */
161 if (tw1 < 3)
162 tw1 = 3;
163 if (tw1 > 0x40)
164 return -1;
166 actim = ps_to_sossi_ticks(t->access_time, div);
167 if (actim < reoff)
168 actim++;
170 * access time (data hold time) will be exactly one sossi
171 * tick
173 if (actim - reoff > 1)
174 return -1;
176 t->tim[0] = tw0 - 1;
177 t->tim[1] = tw1 - 1;
179 return 0;
182 static int calc_wr_timings(struct extif_timings *t)
184 u32 tw0, tw1;
185 int weon, weoff, wecyc;
186 int div = t->clk_div;
189 * Make sure that after conversion it still holds that:
190 * weoff > weon, wecyc >= weoff
192 weon = ps_to_sossi_ticks(t->we_on_time, div);
193 /* weon will be exactly one sossi tick */
194 if (weon > 1)
195 return -1;
197 weoff = ps_to_sossi_ticks(t->we_off_time, div);
198 if (weoff <= weon)
199 weoff = weon + 1;
200 tw0 = weoff - weon;
201 if (tw0 > 0x10)
202 return -1;
204 wecyc = ps_to_sossi_ticks(t->we_cycle_time, div);
205 if (wecyc <= weoff)
206 wecyc = weoff + 1;
208 tw1 = wecyc - tw0;
209 /* values less then 3 result in the SOSSI block resetting itself */
210 if (tw1 < 3)
211 tw1 = 3;
212 if (tw1 > 0x40)
213 return -1;
215 t->tim[2] = tw0 - 1;
216 t->tim[3] = tw1 - 1;
218 return 0;
221 static void _set_timing(int div, int tw0, int tw1)
223 u32 l;
225 #ifdef VERBOSE
226 dev_dbg(sossi.fbdev->dev, "Using TW0 = %d, TW1 = %d, div = %d\n",
227 tw0 + 1, tw1 + 1, div);
228 #endif
230 clk_set_rate(sossi.fck, sossi.fck_hz / div);
231 clk_enable(sossi.fck);
232 l = sossi_read_reg(SOSSI_INIT1_REG);
233 l &= ~((0x0f << 20) | (0x3f << 24));
234 l |= (tw0 << 20) | (tw1 << 24);
235 sossi_write_reg(SOSSI_INIT1_REG, l);
236 clk_disable(sossi.fck);
239 static void _set_bits_per_cycle(int bus_pick_count, int bus_pick_width)
241 u32 l;
243 l = sossi_read_reg(SOSSI_INIT3_REG);
244 l &= ~0x3ff;
245 l |= ((bus_pick_count - 1) << 5) | ((bus_pick_width - 1) & 0x1f);
246 sossi_write_reg(SOSSI_INIT3_REG, l);
249 static void _set_tearsync_mode(int mode, unsigned line)
251 u32 l;
253 l = sossi_read_reg(SOSSI_TEARING_REG);
254 l &= ~(((1 << 11) - 1) << 15);
255 l |= line << 15;
256 l &= ~(0x3 << 26);
257 l |= mode << 26;
258 sossi_write_reg(SOSSI_TEARING_REG, l);
259 if (mode)
260 sossi_set_bits(SOSSI_INIT2_REG, 1 << 6); /* TE logic */
261 else
262 sossi_clear_bits(SOSSI_INIT2_REG, 1 << 6);
265 static inline void set_timing(int access)
267 if (access != sossi.last_access) {
268 sossi.last_access = access;
269 _set_timing(sossi.clk_div,
270 sossi.clk_tw0[access], sossi.clk_tw1[access]);
274 static void sossi_start_transfer(void)
276 /* WE */
277 sossi_clear_bits(SOSSI_INIT2_REG, 1 << 4);
278 /* CS active low */
279 sossi_clear_bits(SOSSI_INIT1_REG, 1 << 30);
282 static void sossi_stop_transfer(void)
284 /* WE */
285 sossi_set_bits(SOSSI_INIT2_REG, 1 << 4);
286 /* CS active low */
287 sossi_set_bits(SOSSI_INIT1_REG, 1 << 30);
290 static void wait_end_of_write(void)
292 /* Before reading we must check if some writings are going on */
293 while (!(sossi_read_reg(SOSSI_INIT2_REG) & (1 << 3)));
296 static void send_data(const void *data, unsigned int len)
298 while (len >= 4) {
299 sossi_write_reg(SOSSI_FIFO_REG, *(const u32 *) data);
300 len -= 4;
301 data += 4;
303 while (len >= 2) {
304 sossi_write_reg16(SOSSI_FIFO_REG, *(const u16 *) data);
305 len -= 2;
306 data += 2;
308 while (len) {
309 sossi_write_reg8(SOSSI_FIFO_REG, *(const u8 *) data);
310 len--;
311 data++;
315 static void set_cycles(unsigned int len)
317 unsigned long nr_cycles = len / (sossi.bus_pick_width / 8);
319 BUG_ON((nr_cycles - 1) & ~0x3ffff);
321 sossi_clear_bits(SOSSI_INIT1_REG, 0x3ffff);
322 sossi_set_bits(SOSSI_INIT1_REG, (nr_cycles - 1) & 0x3ffff);
325 static int sossi_convert_timings(struct extif_timings *t)
327 int r = 0;
328 int div = t->clk_div;
330 t->converted = 0;
332 if (div <= 0 || div > 8)
333 return -1;
335 /* no CS on SOSSI, so ignore cson, csoff, cs_pulsewidth */
336 if ((r = calc_rd_timings(t)) < 0)
337 return r;
339 if ((r = calc_wr_timings(t)) < 0)
340 return r;
342 t->tim[4] = div;
344 t->converted = 1;
346 return 0;
349 static void sossi_set_timings(const struct extif_timings *t)
351 BUG_ON(!t->converted);
353 sossi.clk_tw0[RD_ACCESS] = t->tim[0];
354 sossi.clk_tw1[RD_ACCESS] = t->tim[1];
356 sossi.clk_tw0[WR_ACCESS] = t->tim[2];
357 sossi.clk_tw1[WR_ACCESS] = t->tim[3];
359 sossi.clk_div = t->tim[4];
362 static void sossi_get_clk_info(u32 *clk_period, u32 *max_clk_div)
364 *clk_period = HZ_TO_PS(sossi.fck_hz);
365 *max_clk_div = 8;
368 static void sossi_set_bits_per_cycle(int bpc)
370 int bus_pick_count, bus_pick_width;
373 * We set explicitly the the bus_pick_count as well, although
374 * with remapping/reordering disabled it will be calculated by HW
375 * as (32 / bus_pick_width).
377 switch (bpc) {
378 case 8:
379 bus_pick_count = 4;
380 bus_pick_width = 8;
381 break;
382 case 16:
383 bus_pick_count = 2;
384 bus_pick_width = 16;
385 break;
386 default:
387 BUG();
388 return;
390 sossi.bus_pick_width = bus_pick_width;
391 sossi.bus_pick_count = bus_pick_count;
394 static int sossi_setup_tearsync(unsigned pin_cnt,
395 unsigned hs_pulse_time, unsigned vs_pulse_time,
396 int hs_pol_inv, int vs_pol_inv, int div)
398 int hs, vs;
399 u32 l;
401 if (pin_cnt != 1 || div < 1 || div > 8)
402 return -EINVAL;
404 hs = ps_to_sossi_ticks(hs_pulse_time, div);
405 vs = ps_to_sossi_ticks(vs_pulse_time, div);
406 if (vs < 8 || vs <= hs || vs >= (1 << 12))
407 return -EDOM;
408 vs /= 8;
409 vs--;
410 if (hs > 8)
411 hs = 8;
412 if (hs)
413 hs--;
415 dev_dbg(sossi.fbdev->dev,
416 "setup_tearsync: hs %d vs %d hs_inv %d vs_inv %d\n",
417 hs, vs, hs_pol_inv, vs_pol_inv);
419 clk_enable(sossi.fck);
420 l = sossi_read_reg(SOSSI_TEARING_REG);
421 l &= ~((1 << 15) - 1);
422 l |= vs << 3;
423 l |= hs;
424 if (hs_pol_inv)
425 l |= 1 << 29;
426 else
427 l &= ~(1 << 29);
428 if (vs_pol_inv)
429 l |= 1 << 28;
430 else
431 l &= ~(1 << 28);
432 sossi_write_reg(SOSSI_TEARING_REG, l);
433 clk_disable(sossi.fck);
435 return 0;
438 static int sossi_enable_tearsync(int enable, unsigned line)
440 int mode;
442 dev_dbg(sossi.fbdev->dev, "tearsync %d line %d\n", enable, line);
443 if (line >= 1 << 11)
444 return -EINVAL;
445 if (enable) {
446 if (line)
447 mode = 2; /* HS or VS */
448 else
449 mode = 3; /* VS only */
450 } else
451 mode = 0;
452 sossi.tearsync_line = line;
453 sossi.tearsync_mode = mode;
455 return 0;
458 static void sossi_write_command(const void *data, unsigned int len)
460 clk_enable(sossi.fck);
461 set_timing(WR_ACCESS);
462 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
463 /* CMD#/DATA */
464 sossi_clear_bits(SOSSI_INIT1_REG, 1 << 18);
465 set_cycles(len);
466 sossi_start_transfer();
467 send_data(data, len);
468 sossi_stop_transfer();
469 wait_end_of_write();
470 clk_disable(sossi.fck);
473 static void sossi_write_data(const void *data, unsigned int len)
475 clk_enable(sossi.fck);
476 set_timing(WR_ACCESS);
477 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
478 /* CMD#/DATA */
479 sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
480 set_cycles(len);
481 sossi_start_transfer();
482 send_data(data, len);
483 sossi_stop_transfer();
484 wait_end_of_write();
485 clk_disable(sossi.fck);
488 static void sossi_transfer_area(int width, int height,
489 void (callback)(void *data), void *data)
491 BUG_ON(callback == NULL);
493 sossi.lcdc_callback = callback;
494 sossi.lcdc_callback_data = data;
496 clk_enable(sossi.fck);
497 set_timing(WR_ACCESS);
498 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
499 _set_tearsync_mode(sossi.tearsync_mode, sossi.tearsync_line);
500 /* CMD#/DATA */
501 sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
502 set_cycles(width * height * sossi.bus_pick_width / 8);
504 sossi_start_transfer();
505 if (sossi.tearsync_mode) {
507 * Wait for the sync signal and start the transfer only
508 * then. We can't seem to be able to use HW sync DMA for
509 * this since LCD DMA shows huge latencies, as if it
510 * would ignore some of the DMA requests from SoSSI.
512 unsigned long flags;
514 spin_lock_irqsave(&sossi.lock, flags);
515 sossi.vsync_dma_pending++;
516 spin_unlock_irqrestore(&sossi.lock, flags);
517 } else
518 /* Just start the transfer right away. */
519 omap_enable_lcd_dma();
522 static void sossi_dma_callback(void *data)
524 omap_stop_lcd_dma();
525 sossi_stop_transfer();
526 clk_disable(sossi.fck);
527 sossi.lcdc_callback(sossi.lcdc_callback_data);
530 static void sossi_read_data(void *data, unsigned int len)
532 clk_enable(sossi.fck);
533 set_timing(RD_ACCESS);
534 _set_bits_per_cycle(sossi.bus_pick_count, sossi.bus_pick_width);
535 /* CMD#/DATA */
536 sossi_set_bits(SOSSI_INIT1_REG, 1 << 18);
537 set_cycles(len);
538 sossi_start_transfer();
539 while (len >= 4) {
540 *(u32 *) data = sossi_read_reg(SOSSI_FIFO_REG);
541 len -= 4;
542 data += 4;
544 while (len >= 2) {
545 *(u16 *) data = sossi_read_reg16(SOSSI_FIFO_REG);
546 len -= 2;
547 data += 2;
549 while (len) {
550 *(u8 *) data = sossi_read_reg8(SOSSI_FIFO_REG);
551 len--;
552 data++;
554 sossi_stop_transfer();
555 clk_disable(sossi.fck);
558 static irqreturn_t sossi_match_irq(int irq, void *data)
560 unsigned long flags;
562 spin_lock_irqsave(&sossi.lock, flags);
563 if (sossi.vsync_dma_pending) {
564 sossi.vsync_dma_pending--;
565 omap_enable_lcd_dma();
567 spin_unlock_irqrestore(&sossi.lock, flags);
568 return IRQ_HANDLED;
571 static int sossi_init(struct omapfb_device *fbdev)
573 u32 l, k;
574 struct clk *fck;
575 struct clk *dpll1out_ck;
576 int r;
578 sossi.base = ioremap(OMAP_SOSSI_BASE, SZ_1K);
579 if (!sossi.base) {
580 dev_err(fbdev->dev, "can't ioremap SoSSI\n");
581 return -ENOMEM;
584 sossi.fbdev = fbdev;
585 spin_lock_init(&sossi.lock);
587 dpll1out_ck = clk_get(fbdev->dev, "ck_dpll1out");
588 if (IS_ERR(dpll1out_ck)) {
589 dev_err(fbdev->dev, "can't get DPLL1OUT clock\n");
590 return PTR_ERR(dpll1out_ck);
593 * We need the parent clock rate, which we might divide further
594 * depending on the timing requirements of the controller. See
595 * _set_timings.
597 sossi.fck_hz = clk_get_rate(dpll1out_ck);
598 clk_put(dpll1out_ck);
600 fck = clk_get(fbdev->dev, "ck_sossi");
601 if (IS_ERR(fck)) {
602 dev_err(fbdev->dev, "can't get SoSSI functional clock\n");
603 return PTR_ERR(fck);
605 sossi.fck = fck;
607 /* Reset and enable the SoSSI module */
608 l = omap_readl(MOD_CONF_CTRL_1);
609 l |= CONF_SOSSI_RESET_R;
610 omap_writel(l, MOD_CONF_CTRL_1);
611 l &= ~CONF_SOSSI_RESET_R;
612 omap_writel(l, MOD_CONF_CTRL_1);
614 clk_enable(sossi.fck);
615 l = omap_readl(ARM_IDLECT2);
616 l &= ~(1 << 8); /* DMACK_REQ */
617 omap_writel(l, ARM_IDLECT2);
619 l = sossi_read_reg(SOSSI_INIT2_REG);
620 /* Enable and reset the SoSSI block */
621 l |= (1 << 0) | (1 << 1);
622 sossi_write_reg(SOSSI_INIT2_REG, l);
623 /* Take SoSSI out of reset */
624 l &= ~(1 << 1);
625 sossi_write_reg(SOSSI_INIT2_REG, l);
627 sossi_write_reg(SOSSI_ID_REG, 0);
628 l = sossi_read_reg(SOSSI_ID_REG);
629 k = sossi_read_reg(SOSSI_ID_REG);
631 if (l != 0x55555555 || k != 0xaaaaaaaa) {
632 dev_err(fbdev->dev,
633 "invalid SoSSI sync pattern: %08x, %08x\n", l, k);
634 r = -ENODEV;
635 goto err;
638 if ((r = omap_lcdc_set_dma_callback(sossi_dma_callback, NULL)) < 0) {
639 dev_err(fbdev->dev, "can't get LCDC IRQ\n");
640 r = -ENODEV;
641 goto err;
644 l = sossi_read_reg(SOSSI_ID_REG); /* Component code */
645 l = sossi_read_reg(SOSSI_ID_REG);
646 dev_info(fbdev->dev, "SoSSI version %d.%d initialized\n",
647 l >> 16, l & 0xffff);
649 l = sossi_read_reg(SOSSI_INIT1_REG);
650 l |= (1 << 19); /* DMA_MODE */
651 l &= ~(1 << 31); /* REORDERING */
652 sossi_write_reg(SOSSI_INIT1_REG, l);
654 if ((r = request_irq(INT_1610_SoSSI_MATCH, sossi_match_irq,
655 IRQ_TYPE_EDGE_FALLING,
656 "sossi_match", sossi.fbdev->dev)) < 0) {
657 dev_err(sossi.fbdev->dev, "can't get SoSSI match IRQ\n");
658 goto err;
661 clk_disable(sossi.fck);
662 return 0;
664 err:
665 clk_disable(sossi.fck);
666 clk_put(sossi.fck);
667 return r;
670 static void sossi_cleanup(void)
672 omap_lcdc_free_dma_callback();
673 clk_put(sossi.fck);
674 iounmap(sossi.base);
677 struct lcd_ctrl_extif omap1_ext_if = {
678 .init = sossi_init,
679 .cleanup = sossi_cleanup,
680 .get_clk_info = sossi_get_clk_info,
681 .convert_timings = sossi_convert_timings,
682 .set_timings = sossi_set_timings,
683 .set_bits_per_cycle = sossi_set_bits_per_cycle,
684 .setup_tearsync = sossi_setup_tearsync,
685 .enable_tearsync = sossi_enable_tearsync,
686 .write_command = sossi_write_command,
687 .read_data = sossi_read_data,
688 .write_data = sossi_write_data,
689 .transfer_area = sossi_transfer_area,
691 .max_transmit_size = SOSSI_MAX_XMIT_BYTES,