4 * HDMI interface DSS driver setting for TI's OMAP4 family of processor.
5 * Copyright (C) 2010-2011 Texas Instruments Incorporated - http://www.ti.com/
7 * Mythri pk <mythripk@ti.com>
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License version 2 as published by
11 * the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but WITHOUT
14 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
18 * You should have received a copy of the GNU General Public License along with
19 * this program. If not, see <http://www.gnu.org/licenses/>.
22 #define DSS_SUBSYS_NAME "HDMI"
24 #include <linux/kernel.h>
25 #include <linux/module.h>
26 #include <linux/err.h>
28 #include <linux/interrupt.h>
29 #include <linux/mutex.h>
30 #include <linux/delay.h>
31 #include <linux/string.h>
32 #include <linux/platform_device.h>
33 #include <linux/pm_runtime.h>
34 #include <linux/clk.h>
35 #include <video/omapdss.h>
36 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
37 defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
38 #include <sound/soc.h>
39 #include <sound/pcm_params.h>
40 #include "ti_hdmi_4xxx_ip.h"
45 #include "dss_features.h"
48 #define HDMI_CORE_SYS 0x400
49 #define HDMI_CORE_AV 0x900
50 #define HDMI_PLLCTRL 0x200
51 #define HDMI_PHY 0x300
53 /* HDMI EDID Length move this */
54 #define HDMI_EDID_MAX_LENGTH 256
55 #define EDID_TIMING_DESCRIPTOR_SIZE 0x12
56 #define EDID_DESCRIPTOR_BLOCK0_ADDRESS 0x36
57 #define EDID_DESCRIPTOR_BLOCK1_ADDRESS 0x80
58 #define EDID_SIZE_BLOCK0_TIMING_DESCRIPTOR 4
59 #define EDID_SIZE_BLOCK1_TIMING_DESCRIPTOR 4
61 #define OMAP_HDMI_TIMINGS_NB 34
63 #define HDMI_DEFAULT_REGN 16
64 #define HDMI_DEFAULT_REGM2 1
68 struct omap_display_platform_data
*pdata
;
69 struct platform_device
*pdev
;
70 struct hdmi_ip_data ip_data
;
78 * Logic for the below structure :
79 * user enters the CEA or VESA timings by specifying the HDMI/DVI code.
80 * There is a correspondence between CEA/VESA timing and code, please
81 * refer to section 6.3 in HDMI 1.3 specification for timing code.
83 * In the below structure, cea_vesa_timings corresponds to all OMAP4
84 * supported CEA and VESA timing values.code_cea corresponds to the CEA
85 * code, It is used to get the timing from cea_vesa_timing array.Similarly
86 * with code_vesa. Code_index is used for back mapping, that is once EDID
87 * is read from the TV, EDID is parsed to find the timing values and then
88 * map it to corresponding CEA or VESA index.
91 static const struct hdmi_timings cea_vesa_timings
[OMAP_HDMI_TIMINGS_NB
] = {
92 { {640, 480, 25200, 96, 16, 48, 2, 10, 33} , 0 , 0},
93 { {1280, 720, 74250, 40, 440, 220, 5, 5, 20}, 1, 1},
94 { {1280, 720, 74250, 40, 110, 220, 5, 5, 20}, 1, 1},
95 { {720, 480, 27027, 62, 16, 60, 6, 9, 30}, 0, 0},
96 { {2880, 576, 108000, 256, 48, 272, 5, 5, 39}, 0, 0},
97 { {1440, 240, 27027, 124, 38, 114, 3, 4, 15}, 0, 0},
98 { {1440, 288, 27000, 126, 24, 138, 3, 2, 19}, 0, 0},
99 { {1920, 540, 74250, 44, 528, 148, 5, 2, 15}, 1, 1},
100 { {1920, 540, 74250, 44, 88, 148, 5, 2, 15}, 1, 1},
101 { {1920, 1080, 148500, 44, 88, 148, 5, 4, 36}, 1, 1},
102 { {720, 576, 27000, 64, 12, 68, 5, 5, 39}, 0, 0},
103 { {1440, 576, 54000, 128, 24, 136, 5, 5, 39}, 0, 0},
104 { {1920, 1080, 148500, 44, 528, 148, 5, 4, 36}, 1, 1},
105 { {2880, 480, 108108, 248, 64, 240, 6, 9, 30}, 0, 0},
106 { {1920, 1080, 74250, 44, 638, 148, 5, 4, 36}, 1, 1},
108 { {640, 480, 25175, 96, 16, 48, 2 , 11, 31}, 0, 0},
109 { {800, 600, 40000, 128, 40, 88, 4 , 1, 23}, 1, 1},
110 { {848, 480, 33750, 112, 16, 112, 8 , 6, 23}, 1, 1},
111 { {1280, 768, 79500, 128, 64, 192, 7 , 3, 20}, 1, 0},
112 { {1280, 800, 83500, 128, 72, 200, 6 , 3, 22}, 1, 0},
113 { {1360, 768, 85500, 112, 64, 256, 6 , 3, 18}, 1, 1},
114 { {1280, 960, 108000, 112, 96, 312, 3 , 1, 36}, 1, 1},
115 { {1280, 1024, 108000, 112, 48, 248, 3 , 1, 38}, 1, 1},
116 { {1024, 768, 65000, 136, 24, 160, 6, 3, 29}, 0, 0},
117 { {1400, 1050, 121750, 144, 88, 232, 4, 3, 32}, 1, 0},
118 { {1440, 900, 106500, 152, 80, 232, 6, 3, 25}, 1, 0},
119 { {1680, 1050, 146250, 176 , 104, 280, 6, 3, 30}, 1, 0},
120 { {1366, 768, 85500, 143, 70, 213, 3, 3, 24}, 1, 1},
121 { {1920, 1080, 148500, 44, 148, 80, 5, 4, 36}, 1, 1},
122 { {1280, 768, 68250, 32, 48, 80, 7, 3, 12}, 0, 1},
123 { {1400, 1050, 101000, 32, 48, 80, 4, 3, 23}, 0, 1},
124 { {1680, 1050, 119000, 32, 48, 80, 6, 3, 21}, 0, 1},
125 { {1280, 800, 79500, 32, 48, 80, 6, 3, 14}, 0, 1},
126 { {1280, 720, 74250, 40, 110, 220, 5, 5, 20}, 1, 1}
130 * This is a static mapping array which maps the timing values
131 * with corresponding CEA / VESA code
133 static const int code_index
[OMAP_HDMI_TIMINGS_NB
] = {
134 1, 19, 4, 2, 37, 6, 21, 20, 5, 16, 17, 29, 31, 35, 32,
135 /* <--15 CEA 17--> vesa*/
136 4, 9, 0xE, 0x17, 0x1C, 0x27, 0x20, 0x23, 0x10, 0x2A,
137 0X2F, 0x3A, 0X51, 0X52, 0x16, 0x29, 0x39, 0x1B
141 * This is reverse static mapping which maps the CEA / VESA code
142 * to the corresponding timing values
144 static const int code_cea
[39] = {
145 -1, 0, 3, 3, 2, 8, 5, 5, -1, -1,
146 -1, -1, -1, -1, -1, -1, 9, 10, 10, 1,
147 7, 6, 6, -1, -1, -1, -1, -1, -1, 11,
148 11, 12, 14, -1, -1, 13, 13, 4, 4
151 static const int code_vesa
[85] = {
152 -1, -1, -1, -1, 15, -1, -1, -1, -1, 16,
153 -1, -1, -1, -1, 17, -1, 23, -1, -1, -1,
154 -1, -1, 29, 18, -1, -1, -1, 32, 19, -1,
155 -1, -1, 21, -1, -1, 22, -1, -1, -1, 20,
156 -1, 30, 24, -1, -1, -1, -1, 25, -1, -1,
157 -1, -1, -1, -1, -1, -1, -1, 31, 26, -1,
158 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
159 -1, -1, -1, -1, -1, -1, -1, -1, -1, -1,
162 static int hdmi_runtime_get(void)
166 DSSDBG("hdmi_runtime_get\n");
169 * HACK: Add dss_runtime_get() to ensure DSS clock domain is enabled.
170 * This should be removed later.
172 r
= dss_runtime_get();
176 r
= pm_runtime_get_sync(&hdmi
.pdev
->dev
);
189 static void hdmi_runtime_put(void)
193 DSSDBG("hdmi_runtime_put\n");
195 r
= pm_runtime_put_sync(&hdmi
.pdev
->dev
);
199 * HACK: This is added to complement the dss_runtime_get() call in
200 * hdmi_runtime_get(). This should be removed later.
205 int hdmi_init_display(struct omap_dss_device
*dssdev
)
207 DSSDBG("init_display\n");
209 dss_init_hdmi_ip_ops(&hdmi
.ip_data
);
213 static int get_timings_index(void)
218 code
= code_vesa
[hdmi
.code
];
220 code
= code_cea
[hdmi
.code
];
223 /* HDMI code 4 corresponds to 640 * 480 VGA */
225 /* DVI mode 1 corresponds to HDMI 0 to DVI */
226 hdmi
.mode
= HDMI_DVI
;
228 code
= code_vesa
[hdmi
.code
];
233 static struct hdmi_cm
hdmi_get_code(struct omap_video_timings
*timing
)
235 int i
= 0, code
= -1, temp_vsync
= 0, temp_hsync
= 0;
236 int timing_vsync
= 0, timing_hsync
= 0;
237 struct hdmi_video_timings temp
;
238 struct hdmi_cm cm
= {-1};
239 DSSDBG("hdmi_get_code\n");
241 for (i
= 0; i
< OMAP_HDMI_TIMINGS_NB
; i
++) {
242 temp
= cea_vesa_timings
[i
].timings
;
243 if ((temp
.pixel_clock
== timing
->pixel_clock
) &&
244 (temp
.x_res
== timing
->x_res
) &&
245 (temp
.y_res
== timing
->y_res
)) {
247 temp_hsync
= temp
.hfp
+ temp
.hsw
+ temp
.hbp
;
248 timing_hsync
= timing
->hfp
+ timing
->hsw
+ timing
->hbp
;
249 temp_vsync
= temp
.vfp
+ temp
.vsw
+ temp
.vbp
;
250 timing_vsync
= timing
->vfp
+ timing
->vsw
+ timing
->vbp
;
252 DSSDBG("temp_hsync = %d , temp_vsync = %d"
253 "timing_hsync = %d, timing_vsync = %d\n",
254 temp_hsync
, temp_hsync
,
255 timing_hsync
, timing_vsync
);
257 if ((temp_hsync
== timing_hsync
) &&
258 (temp_vsync
== timing_vsync
)) {
260 cm
.code
= code_index
[i
];
265 DSSDBG("Hdmi_code = %d mode = %d\n",
275 static void update_hdmi_timings(struct hdmi_config
*cfg
,
276 struct omap_video_timings
*timings
, int code
)
278 cfg
->timings
.timings
.x_res
= timings
->x_res
;
279 cfg
->timings
.timings
.y_res
= timings
->y_res
;
280 cfg
->timings
.timings
.hbp
= timings
->hbp
;
281 cfg
->timings
.timings
.hfp
= timings
->hfp
;
282 cfg
->timings
.timings
.hsw
= timings
->hsw
;
283 cfg
->timings
.timings
.vbp
= timings
->vbp
;
284 cfg
->timings
.timings
.vfp
= timings
->vfp
;
285 cfg
->timings
.timings
.vsw
= timings
->vsw
;
286 cfg
->timings
.timings
.pixel_clock
= timings
->pixel_clock
;
287 cfg
->timings
.vsync_pol
= cea_vesa_timings
[code
].vsync_pol
;
288 cfg
->timings
.hsync_pol
= cea_vesa_timings
[code
].hsync_pol
;
291 unsigned long hdmi_get_pixel_clock(void)
293 /* HDMI Pixel Clock in Mhz */
294 return hdmi
.ip_data
.cfg
.timings
.timings
.pixel_clock
* 1000;
297 static void hdmi_compute_pll(struct omap_dss_device
*dssdev
, int phy
,
298 struct hdmi_pll_info
*pi
)
300 unsigned long clkin
, refclk
;
303 clkin
= clk_get_rate(hdmi
.sys_clk
) / 10000;
305 * Input clock is predivided by N + 1
306 * out put of which is reference clk
308 if (dssdev
->clocks
.hdmi
.regn
== 0)
309 pi
->regn
= HDMI_DEFAULT_REGN
;
311 pi
->regn
= dssdev
->clocks
.hdmi
.regn
;
313 refclk
= clkin
/ pi
->regn
;
316 * multiplier is pixel_clk/ref_clk
317 * Multiplying by 100 to avoid fractional part removal
319 pi
->regm
= (phy
* 100 / (refclk
)) / 100;
321 if (dssdev
->clocks
.hdmi
.regm2
== 0)
322 pi
->regm2
= HDMI_DEFAULT_REGM2
;
324 pi
->regm2
= dssdev
->clocks
.hdmi
.regm2
;
327 * fractional multiplier is remainder of the difference between
328 * multiplier and actual phy(required pixel clock thus should be
329 * multiplied by 2^18(262144) divided by the reference clock
331 mf
= (phy
- pi
->regm
* refclk
) * 262144;
332 pi
->regmf
= mf
/ (refclk
);
335 * Dcofreq should be set to 1 if required pixel clock
336 * is greater than 1000MHz
338 pi
->dcofreq
= phy
> 1000 * 100;
339 pi
->regsd
= ((pi
->regm
* clkin
/ 10) / (pi
->regn
* 250) + 5) / 10;
341 /* Set the reference clock to sysclk reference */
342 pi
->refsel
= HDMI_REFSEL_SYSCLK
;
344 DSSDBG("M = %d Mf = %d\n", pi
->regm
, pi
->regmf
);
345 DSSDBG("range = %d sd = %d\n", pi
->dcofreq
, pi
->regsd
);
348 static int hdmi_power_on(struct omap_dss_device
*dssdev
)
351 struct omap_video_timings
*p
;
354 r
= hdmi_runtime_get();
358 dss_mgr_disable(dssdev
->manager
);
360 p
= &dssdev
->panel
.timings
;
362 DSSDBG("hdmi_power_on x_res= %d y_res = %d\n",
363 dssdev
->panel
.timings
.x_res
,
364 dssdev
->panel
.timings
.y_res
);
366 code
= get_timings_index();
367 update_hdmi_timings(&hdmi
.ip_data
.cfg
, p
, code
);
369 phy
= p
->pixel_clock
;
371 hdmi_compute_pll(dssdev
, phy
, &hdmi
.ip_data
.pll_data
);
373 hdmi
.ip_data
.ops
->video_enable(&hdmi
.ip_data
, 0);
375 /* config the PLL and PHY hdmi_set_pll_pwrfirst */
376 r
= hdmi
.ip_data
.ops
->pll_enable(&hdmi
.ip_data
);
378 DSSDBG("Failed to lock PLL\n");
382 r
= hdmi
.ip_data
.ops
->phy_enable(&hdmi
.ip_data
);
384 DSSDBG("Failed to start PHY\n");
388 hdmi
.ip_data
.cfg
.cm
.mode
= hdmi
.mode
;
389 hdmi
.ip_data
.cfg
.cm
.code
= hdmi
.code
;
390 hdmi
.ip_data
.ops
->video_configure(&hdmi
.ip_data
);
392 /* Make selection of HDMI in DSS */
393 dss_select_hdmi_venc_clk_source(DSS_HDMI_M_PCLK
);
395 /* Select the dispc clock source as PRCM clock, to ensure that it is not
396 * DSI PLL source as the clock selected by DSI PLL might not be
397 * sufficient for the resolution selected / that can be changed
398 * dynamically by user. This can be moved to single location , say
401 dss_select_dispc_clk_source(dssdev
->clocks
.dispc
.dispc_fclk_src
);
403 /* bypass TV gamma table */
404 dispc_enable_gamma_table(0);
407 dispc_set_digit_size(dssdev
->panel
.timings
.x_res
,
408 dssdev
->panel
.timings
.y_res
);
410 hdmi
.ip_data
.ops
->video_enable(&hdmi
.ip_data
, 1);
412 r
= dss_mgr_enable(dssdev
->manager
);
419 hdmi
.ip_data
.ops
->video_enable(&hdmi
.ip_data
, 0);
420 hdmi
.ip_data
.ops
->phy_disable(&hdmi
.ip_data
);
421 hdmi
.ip_data
.ops
->pll_disable(&hdmi
.ip_data
);
427 static void hdmi_power_off(struct omap_dss_device
*dssdev
)
429 dss_mgr_disable(dssdev
->manager
);
431 hdmi
.ip_data
.ops
->video_enable(&hdmi
.ip_data
, 0);
432 hdmi
.ip_data
.ops
->phy_disable(&hdmi
.ip_data
);
433 hdmi
.ip_data
.ops
->pll_disable(&hdmi
.ip_data
);
437 int omapdss_hdmi_display_check_timing(struct omap_dss_device
*dssdev
,
438 struct omap_video_timings
*timings
)
442 cm
= hdmi_get_code(timings
);
451 void omapdss_hdmi_display_set_timing(struct omap_dss_device
*dssdev
)
455 cm
= hdmi_get_code(&dssdev
->panel
.timings
);
459 if (dssdev
->state
== OMAP_DSS_DISPLAY_ACTIVE
) {
462 hdmi_power_off(dssdev
);
464 r
= hdmi_power_on(dssdev
);
466 DSSERR("failed to power on device\n");
470 void hdmi_dump_regs(struct seq_file
*s
)
472 mutex_lock(&hdmi
.lock
);
474 if (hdmi_runtime_get())
477 hdmi
.ip_data
.ops
->dump_wrapper(&hdmi
.ip_data
, s
);
478 hdmi
.ip_data
.ops
->dump_pll(&hdmi
.ip_data
, s
);
479 hdmi
.ip_data
.ops
->dump_phy(&hdmi
.ip_data
, s
);
480 hdmi
.ip_data
.ops
->dump_core(&hdmi
.ip_data
, s
);
483 mutex_unlock(&hdmi
.lock
);
486 int omapdss_hdmi_read_edid(u8
*buf
, int len
)
490 mutex_lock(&hdmi
.lock
);
492 r
= hdmi_runtime_get();
495 r
= hdmi
.ip_data
.ops
->read_edid(&hdmi
.ip_data
, buf
, len
);
498 mutex_unlock(&hdmi
.lock
);
503 bool omapdss_hdmi_detect(void)
507 mutex_lock(&hdmi
.lock
);
509 r
= hdmi_runtime_get();
512 r
= hdmi
.ip_data
.ops
->detect(&hdmi
.ip_data
);
515 mutex_unlock(&hdmi
.lock
);
520 int omapdss_hdmi_display_enable(struct omap_dss_device
*dssdev
)
522 struct omap_dss_hdmi_data
*priv
= dssdev
->data
;
525 DSSDBG("ENTER hdmi_display_enable\n");
527 mutex_lock(&hdmi
.lock
);
529 if (dssdev
->manager
== NULL
) {
530 DSSERR("failed to enable display: no manager\n");
535 hdmi
.ip_data
.hpd_gpio
= priv
->hpd_gpio
;
537 r
= omap_dss_start_device(dssdev
);
539 DSSERR("failed to start device\n");
543 if (dssdev
->platform_enable
) {
544 r
= dssdev
->platform_enable(dssdev
);
546 DSSERR("failed to enable GPIO's\n");
551 r
= hdmi_power_on(dssdev
);
553 DSSERR("failed to power on device\n");
557 mutex_unlock(&hdmi
.lock
);
561 if (dssdev
->platform_disable
)
562 dssdev
->platform_disable(dssdev
);
564 omap_dss_stop_device(dssdev
);
566 mutex_unlock(&hdmi
.lock
);
570 void omapdss_hdmi_display_disable(struct omap_dss_device
*dssdev
)
572 DSSDBG("Enter hdmi_display_disable\n");
574 mutex_lock(&hdmi
.lock
);
576 hdmi_power_off(dssdev
);
578 if (dssdev
->platform_disable
)
579 dssdev
->platform_disable(dssdev
);
581 omap_dss_stop_device(dssdev
);
583 mutex_unlock(&hdmi
.lock
);
586 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
587 defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
589 static int hdmi_audio_trigger(struct snd_pcm_substream
*substream
, int cmd
,
590 struct snd_soc_dai
*dai
)
592 struct snd_soc_pcm_runtime
*rtd
= substream
->private_data
;
593 struct snd_soc_codec
*codec
= rtd
->codec
;
594 struct platform_device
*pdev
= to_platform_device(codec
->dev
);
595 struct hdmi_ip_data
*ip_data
= snd_soc_codec_get_drvdata(codec
);
598 if (!(ip_data
->ops
) && !(ip_data
->ops
->audio_enable
)) {
599 dev_err(&pdev
->dev
, "Cannot enable/disable audio\n");
604 case SNDRV_PCM_TRIGGER_START
:
605 case SNDRV_PCM_TRIGGER_RESUME
:
606 case SNDRV_PCM_TRIGGER_PAUSE_RELEASE
:
607 ip_data
->ops
->audio_enable(ip_data
, true);
609 case SNDRV_PCM_TRIGGER_STOP
:
610 case SNDRV_PCM_TRIGGER_SUSPEND
:
611 case SNDRV_PCM_TRIGGER_PAUSE_PUSH
:
612 ip_data
->ops
->audio_enable(ip_data
, false);
620 static int hdmi_audio_hw_params(struct snd_pcm_substream
*substream
,
621 struct snd_pcm_hw_params
*params
,
622 struct snd_soc_dai
*dai
)
624 struct snd_soc_pcm_runtime
*rtd
= substream
->private_data
;
625 struct snd_soc_codec
*codec
= rtd
->codec
;
626 struct hdmi_ip_data
*ip_data
= snd_soc_codec_get_drvdata(codec
);
627 struct hdmi_audio_format audio_format
;
628 struct hdmi_audio_dma audio_dma
;
629 struct hdmi_core_audio_config core_cfg
;
630 struct hdmi_core_infoframe_audio aud_if_cfg
;
632 enum hdmi_core_audio_sample_freq sample_freq
;
634 switch (params_format(params
)) {
635 case SNDRV_PCM_FORMAT_S16_LE
:
636 core_cfg
.i2s_cfg
.word_max_length
=
637 HDMI_AUDIO_I2S_MAX_WORD_20BITS
;
638 core_cfg
.i2s_cfg
.word_length
= HDMI_AUDIO_I2S_CHST_WORD_16_BITS
;
639 core_cfg
.i2s_cfg
.in_length_bits
=
640 HDMI_AUDIO_I2S_INPUT_LENGTH_16
;
641 core_cfg
.i2s_cfg
.justification
= HDMI_AUDIO_JUSTIFY_LEFT
;
642 audio_format
.samples_per_word
= HDMI_AUDIO_ONEWORD_TWOSAMPLES
;
643 audio_format
.sample_size
= HDMI_AUDIO_SAMPLE_16BITS
;
644 audio_format
.justification
= HDMI_AUDIO_JUSTIFY_LEFT
;
645 audio_dma
.transfer_size
= 0x10;
647 case SNDRV_PCM_FORMAT_S24_LE
:
648 core_cfg
.i2s_cfg
.word_max_length
=
649 HDMI_AUDIO_I2S_MAX_WORD_24BITS
;
650 core_cfg
.i2s_cfg
.word_length
= HDMI_AUDIO_I2S_CHST_WORD_24_BITS
;
651 core_cfg
.i2s_cfg
.in_length_bits
=
652 HDMI_AUDIO_I2S_INPUT_LENGTH_24
;
653 audio_format
.samples_per_word
= HDMI_AUDIO_ONEWORD_ONESAMPLE
;
654 audio_format
.sample_size
= HDMI_AUDIO_SAMPLE_24BITS
;
655 audio_format
.justification
= HDMI_AUDIO_JUSTIFY_RIGHT
;
656 core_cfg
.i2s_cfg
.justification
= HDMI_AUDIO_JUSTIFY_RIGHT
;
657 audio_dma
.transfer_size
= 0x20;
663 switch (params_rate(params
)) {
665 sample_freq
= HDMI_AUDIO_FS_32000
;
668 sample_freq
= HDMI_AUDIO_FS_44100
;
671 sample_freq
= HDMI_AUDIO_FS_48000
;
677 err
= hdmi_config_audio_acr(ip_data
, params_rate(params
), &n
, &cts
);
681 /* Audio wrapper config */
682 audio_format
.stereo_channels
= HDMI_AUDIO_STEREO_ONECHANNEL
;
683 audio_format
.active_chnnls_msk
= 0x03;
684 audio_format
.type
= HDMI_AUDIO_TYPE_LPCM
;
685 audio_format
.sample_order
= HDMI_AUDIO_SAMPLE_LEFT_FIRST
;
686 /* Disable start/stop signals of IEC 60958 blocks */
687 audio_format
.en_sig_blk_strt_end
= HDMI_AUDIO_BLOCK_SIG_STARTEND_OFF
;
689 audio_dma
.block_size
= 0xC0;
690 audio_dma
.mode
= HDMI_AUDIO_TRANSF_DMA
;
691 audio_dma
.fifo_threshold
= 0x20; /* in number of samples */
693 hdmi_wp_audio_config_dma(ip_data
, &audio_dma
);
694 hdmi_wp_audio_config_format(ip_data
, &audio_format
);
699 core_cfg
.i2s_cfg
.en_high_bitrate_aud
= false;
700 /* Only used with high bitrate audio */
701 core_cfg
.i2s_cfg
.cbit_order
= false;
702 /* Serial data and word select should change on sck rising edge */
703 core_cfg
.i2s_cfg
.sck_edge_mode
= HDMI_AUDIO_I2S_SCK_EDGE_RISING
;
704 core_cfg
.i2s_cfg
.vbit
= HDMI_AUDIO_I2S_VBIT_FOR_PCM
;
705 /* Set I2S word select polarity */
706 core_cfg
.i2s_cfg
.ws_polarity
= HDMI_AUDIO_I2S_WS_POLARITY_LOW_IS_LEFT
;
707 core_cfg
.i2s_cfg
.direction
= HDMI_AUDIO_I2S_MSB_SHIFTED_FIRST
;
708 /* Set serial data to word select shift. See Phillips spec. */
709 core_cfg
.i2s_cfg
.shift
= HDMI_AUDIO_I2S_FIRST_BIT_SHIFT
;
710 /* Enable one of the four available serial data channels */
711 core_cfg
.i2s_cfg
.active_sds
= HDMI_AUDIO_I2S_SD0_EN
;
713 /* Core audio config */
714 core_cfg
.freq_sample
= sample_freq
;
717 if (dss_has_feature(FEAT_HDMI_CTS_SWMODE
)) {
718 core_cfg
.aud_par_busclk
= 0;
719 core_cfg
.cts_mode
= HDMI_AUDIO_CTS_MODE_SW
;
720 core_cfg
.use_mclk
= false;
722 core_cfg
.aud_par_busclk
= (((128 * 31) - 1) << 8);
723 core_cfg
.cts_mode
= HDMI_AUDIO_CTS_MODE_HW
;
724 core_cfg
.use_mclk
= true;
725 core_cfg
.mclk_mode
= HDMI_AUDIO_MCLK_128FS
;
727 core_cfg
.layout
= HDMI_AUDIO_LAYOUT_2CH
;
728 core_cfg
.en_spdif
= false;
729 /* Use sample frequency from channel status word */
730 core_cfg
.fs_override
= true;
731 /* Enable ACR packets */
732 core_cfg
.en_acr_pkt
= true;
733 /* Disable direct streaming digital audio */
734 core_cfg
.en_dsd_audio
= false;
735 /* Use parallel audio interface */
736 core_cfg
.en_parallel_aud_input
= true;
738 hdmi_core_audio_config(ip_data
, &core_cfg
);
742 * info frame audio see doc CEA861-D page 74
744 aud_if_cfg
.db1_coding_type
= HDMI_INFOFRAME_AUDIO_DB1CT_FROM_STREAM
;
745 aud_if_cfg
.db1_channel_count
= 2;
746 aud_if_cfg
.db2_sample_freq
= HDMI_INFOFRAME_AUDIO_DB2SF_FROM_STREAM
;
747 aud_if_cfg
.db2_sample_size
= HDMI_INFOFRAME_AUDIO_DB2SS_FROM_STREAM
;
748 aud_if_cfg
.db4_channel_alloc
= 0x00;
749 aud_if_cfg
.db5_downmix_inh
= false;
750 aud_if_cfg
.db5_lsv
= 0;
752 hdmi_core_audio_infoframe_config(ip_data
, &aud_if_cfg
);
756 static int hdmi_audio_startup(struct snd_pcm_substream
*substream
,
757 struct snd_soc_dai
*dai
)
760 pr_err("Current video settings do not support audio.\n");
766 static int hdmi_audio_codec_probe(struct snd_soc_codec
*codec
)
768 struct hdmi_ip_data
*priv
= &hdmi
.ip_data
;
770 snd_soc_codec_set_drvdata(codec
, priv
);
774 static struct snd_soc_codec_driver hdmi_audio_codec_drv
= {
775 .probe
= hdmi_audio_codec_probe
,
778 static struct snd_soc_dai_ops hdmi_audio_codec_ops
= {
779 .hw_params
= hdmi_audio_hw_params
,
780 .trigger
= hdmi_audio_trigger
,
781 .startup
= hdmi_audio_startup
,
784 static struct snd_soc_dai_driver hdmi_codec_dai_drv
= {
785 .name
= "hdmi-audio-codec",
789 .rates
= SNDRV_PCM_RATE_32000
|
790 SNDRV_PCM_RATE_44100
| SNDRV_PCM_RATE_48000
,
791 .formats
= SNDRV_PCM_FMTBIT_S16_LE
|
792 SNDRV_PCM_FMTBIT_S24_LE
,
794 .ops
= &hdmi_audio_codec_ops
,
798 static int hdmi_get_clocks(struct platform_device
*pdev
)
802 clk
= clk_get(&pdev
->dev
, "sys_clk");
804 DSSERR("can't get sys_clk\n");
813 static void hdmi_put_clocks(void)
816 clk_put(hdmi
.sys_clk
);
819 /* HDMI HW IP initialisation */
820 static int omapdss_hdmihw_probe(struct platform_device
*pdev
)
822 struct resource
*hdmi_mem
;
825 hdmi
.pdata
= pdev
->dev
.platform_data
;
828 mutex_init(&hdmi
.lock
);
830 hdmi_mem
= platform_get_resource(hdmi
.pdev
, IORESOURCE_MEM
, 0);
832 DSSERR("can't get IORESOURCE_MEM HDMI\n");
836 /* Base address taken from platform */
837 hdmi
.ip_data
.base_wp
= ioremap(hdmi_mem
->start
,
838 resource_size(hdmi_mem
));
839 if (!hdmi
.ip_data
.base_wp
) {
840 DSSERR("can't ioremap WP\n");
844 r
= hdmi_get_clocks(pdev
);
846 iounmap(hdmi
.ip_data
.base_wp
);
850 pm_runtime_enable(&pdev
->dev
);
852 hdmi
.ip_data
.core_sys_offset
= HDMI_CORE_SYS
;
853 hdmi
.ip_data
.core_av_offset
= HDMI_CORE_AV
;
854 hdmi
.ip_data
.pll_offset
= HDMI_PLLCTRL
;
855 hdmi
.ip_data
.phy_offset
= HDMI_PHY
;
859 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
860 defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
862 /* Register ASoC codec DAI */
863 r
= snd_soc_register_codec(&pdev
->dev
, &hdmi_audio_codec_drv
,
864 &hdmi_codec_dai_drv
, 1);
866 DSSERR("can't register ASoC HDMI audio codec\n");
873 static int omapdss_hdmihw_remove(struct platform_device
*pdev
)
877 #if defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI) || \
878 defined(CONFIG_SND_OMAP_SOC_OMAP4_HDMI_MODULE)
879 snd_soc_unregister_codec(&pdev
->dev
);
882 pm_runtime_disable(&pdev
->dev
);
886 iounmap(hdmi
.ip_data
.base_wp
);
891 static int hdmi_runtime_suspend(struct device
*dev
)
893 clk_disable(hdmi
.sys_clk
);
901 static int hdmi_runtime_resume(struct device
*dev
)
905 r
= dss_runtime_get();
909 r
= dispc_runtime_get();
914 clk_enable(hdmi
.sys_clk
);
924 static const struct dev_pm_ops hdmi_pm_ops
= {
925 .runtime_suspend
= hdmi_runtime_suspend
,
926 .runtime_resume
= hdmi_runtime_resume
,
929 static struct platform_driver omapdss_hdmihw_driver
= {
930 .probe
= omapdss_hdmihw_probe
,
931 .remove
= omapdss_hdmihw_remove
,
933 .name
= "omapdss_hdmi",
934 .owner
= THIS_MODULE
,
939 int hdmi_init_platform_driver(void)
941 return platform_driver_register(&omapdss_hdmihw_driver
);
944 void hdmi_uninit_platform_driver(void)
946 return platform_driver_unregister(&omapdss_hdmihw_driver
);