1 #ifndef LINUX_BCMA_REGS_H_
2 #define LINUX_BCMA_REGS_H_
4 /* Some single registers are shared between many cores */
5 /* BCMA_CLKCTLST: ChipCommon (rev >= 20), PCIe, 80211 */
6 #define BCMA_CLKCTLST 0x01E0 /* Clock control and status */
7 #define BCMA_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */
8 #define BCMA_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */
9 #define BCMA_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */
10 #define BCMA_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */
11 #define BCMA_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */
12 #define BCMA_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */
13 #define BCMA_CLKCTLST_EXTRESREQ 0x00000700 /* Mask of external resource requests */
14 #define BCMA_CLKCTLST_HAVEALP 0x00010000 /* ALP available */
15 #define BCMA_CLKCTLST_HAVEHT 0x00020000 /* HT available */
16 #define BCMA_CLKCTLST_BP_ON_ALP 0x00040000 /* RO: running on ALP clock */
17 #define BCMA_CLKCTLST_BP_ON_HT 0x00080000 /* RO: running on HT clock */
18 #define BCMA_CLKCTLST_EXTRESST 0x07000000 /* Mask of external resource status */
19 /* Is there any BCM4328 on BCMA bus? */
20 #define BCMA_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */
21 #define BCMA_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */
23 /* Agent registers (common for every core) */
24 #define BCMA_IOCTL 0x0408 /* IO control */
25 #define BCMA_IOCTL_CLK 0x0001
26 #define BCMA_IOCTL_FGC 0x0002
27 #define BCMA_IOCTL_CORE_BITS 0x3FFC
28 #define BCMA_IOCTL_PME_EN 0x4000
29 #define BCMA_IOCTL_BIST_EN 0x8000
30 #define BCMA_IOST 0x0500 /* IO status */
31 #define BCMA_IOST_CORE_BITS 0x0FFF
32 #define BCMA_IOST_DMA64 0x1000
33 #define BCMA_IOST_GATED_CLK 0x2000
34 #define BCMA_IOST_BIST_ERROR 0x4000
35 #define BCMA_IOST_BIST_DONE 0x8000
36 #define BCMA_RESET_CTL 0x0800
37 #define BCMA_RESET_CTL_RESET 0x0001
39 /* BCMA PCI config space registers. */
40 #define BCMA_PCI_PMCSR 0x44
41 #define BCMA_PCI_PE 0x100
42 #define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */
43 #define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */
44 #define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */
45 #define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */
46 #define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */
47 #define BCMA_PCI_IRQS 0x90 /* PCI interrupts */
48 #define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */
49 #define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */
50 #define BCMA_PCI_BAR0_WIN2 0xAC
51 #define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */
52 #define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */
53 #define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */
54 #define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */
55 #define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */
56 #define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */
57 #define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */
59 #endif /* LINUX_BCMA_REGS_H_ */
