Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / include / linux / can / gw.h
blob8e1db18c3cb6d7091840be90c20289f19b81d724
1 /*
2 * linux/can/gw.h
4 * Definitions for CAN frame Gateway/Router/Bridge
6 * Author: Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
7 * Copyright (c) 2011 Volkswagen Group Electronic Research
8 * All rights reserved.
12 #ifndef CAN_GW_H
13 #define CAN_GW_H
15 #include <linux/types.h>
16 #include <linux/can.h>
18 struct rtcanmsg {
19 __u8 can_family;
20 __u8 gwtype;
21 __u16 flags;
24 /* CAN gateway types */
25 enum {
26 CGW_TYPE_UNSPEC,
27 CGW_TYPE_CAN_CAN, /* CAN->CAN routing */
28 __CGW_TYPE_MAX
31 #define CGW_TYPE_MAX (__CGW_TYPE_MAX - 1)
33 /* CAN rtnetlink attribute definitions */
34 enum {
35 CGW_UNSPEC,
36 CGW_MOD_AND, /* CAN frame modification binary AND */
37 CGW_MOD_OR, /* CAN frame modification binary OR */
38 CGW_MOD_XOR, /* CAN frame modification binary XOR */
39 CGW_MOD_SET, /* CAN frame modification set alternate values */
40 CGW_CS_XOR, /* set data[] XOR checksum into data[index] */
41 CGW_CS_CRC8, /* set data[] CRC8 checksum into data[index] */
42 CGW_HANDLED, /* number of handled CAN frames */
43 CGW_DROPPED, /* number of dropped CAN frames */
44 CGW_SRC_IF, /* ifindex of source network interface */
45 CGW_DST_IF, /* ifindex of destination network interface */
46 CGW_FILTER, /* specify struct can_filter on source CAN device */
47 __CGW_MAX
50 #define CGW_MAX (__CGW_MAX - 1)
52 #define CGW_FLAGS_CAN_ECHO 0x01
53 #define CGW_FLAGS_CAN_SRC_TSTAMP 0x02
55 #define CGW_MOD_FUNCS 4 /* AND OR XOR SET */
57 /* CAN frame elements that are affected by curr. 3 CAN frame modifications */
58 #define CGW_MOD_ID 0x01
59 #define CGW_MOD_DLC 0x02
60 #define CGW_MOD_DATA 0x04
62 #define CGW_FRAME_MODS 3 /* ID DLC DATA */
64 #define MAX_MODFUNCTIONS (CGW_MOD_FUNCS * CGW_FRAME_MODS)
66 struct cgw_frame_mod {
67 struct can_frame cf;
68 __u8 modtype;
69 } __attribute__((packed));
71 #define CGW_MODATTR_LEN sizeof(struct cgw_frame_mod)
73 struct cgw_csum_xor {
74 __s8 from_idx;
75 __s8 to_idx;
76 __s8 result_idx;
77 __u8 init_xor_val;
78 } __attribute__((packed));
80 struct cgw_csum_crc8 {
81 __s8 from_idx;
82 __s8 to_idx;
83 __s8 result_idx;
84 __u8 init_crc_val;
85 __u8 final_xor_val;
86 __u8 crctab[256];
87 __u8 profile;
88 __u8 profile_data[20];
89 } __attribute__((packed));
91 /* length of checksum operation parameters. idx = index in CAN frame data[] */
92 #define CGW_CS_XOR_LEN sizeof(struct cgw_csum_xor)
93 #define CGW_CS_CRC8_LEN sizeof(struct cgw_csum_crc8)
95 /* CRC8 profiles (compute CRC for additional data elements - see below) */
96 enum {
97 CGW_CRC8PRF_UNSPEC,
98 CGW_CRC8PRF_1U8, /* compute one additional u8 value */
99 CGW_CRC8PRF_16U8, /* u8 value table indexed by data[1] & 0xF */
100 CGW_CRC8PRF_SFFID_XOR, /* (can_id & 0xFF) ^ (can_id >> 8 & 0xFF) */
101 __CGW_CRC8PRF_MAX
104 #define CGW_CRC8PRF_MAX (__CGW_CRC8PRF_MAX - 1)
107 * CAN rtnetlink attribute contents in detail
109 * CGW_XXX_IF (length 4 bytes):
110 * Sets an interface index for source/destination network interfaces.
111 * For the CAN->CAN gwtype the indices of _two_ CAN interfaces are mandatory.
113 * CGW_FILTER (length 8 bytes):
114 * Sets a CAN receive filter for the gateway job specified by the
115 * struct can_filter described in include/linux/can.h
117 * CGW_MOD_XXX (length 17 bytes):
118 * Specifies a modification that's done to a received CAN frame before it is
119 * send out to the destination interface.
121 * <struct can_frame> data used as operator
122 * <u8> affected CAN frame elements
124 * CGW_CS_XOR (length 4 bytes):
125 * Set a simple XOR checksum starting with an initial value into
126 * data[result-idx] using data[start-idx] .. data[end-idx]
128 * The XOR checksum is calculated like this:
130 * xor = init_xor_val
132 * for (i = from_idx .. to_idx)
133 * xor ^= can_frame.data[i]
135 * can_frame.data[ result_idx ] = xor
137 * CGW_CS_CRC8 (length 282 bytes):
138 * Set a CRC8 value into data[result-idx] using a given 256 byte CRC8 table,
139 * a given initial value and a defined input data[start-idx] .. data[end-idx].
140 * Finally the result value is XOR'ed with the final_xor_val.
142 * The CRC8 checksum is calculated like this:
144 * crc = init_crc_val
146 * for (i = from_idx .. to_idx)
147 * crc = crctab[ crc ^ can_frame.data[i] ]
149 * can_frame.data[ result_idx ] = crc ^ final_xor_val
151 * The calculated CRC may contain additional source data elements that can be
152 * defined in the handling of 'checksum profiles' e.g. shown in AUTOSAR specs
153 * like http://www.autosar.org/download/R4.0/AUTOSAR_SWS_E2ELibrary.pdf
154 * E.g. the profile_data[] may contain additional u8 values (called DATA_IDs)
155 * that are used depending on counter values inside the CAN frame data[].
156 * So far only three profiles have been implemented for illustration.
158 * Remark: In general the attribute data is a linear buffer.
159 * Beware of sending unpacked or aligned structs!
162 #endif