include/linux/mmc/sdhci.h

   1 /*
   2  *  linux/include/linux/mmc/sdhci.h - Secure Digital Host Controller Interface
   3  *
   4  *  Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved.
   5  *
   6  * This program is free software; you can redistribute it and/or modify
   7  * it under the terms of the GNU General Public License as published by
   8  * the Free Software Foundation; either version 2 of the License, or (at
   9  * your option) any later version.
  10  */
  11 #ifndef LINUX_MMC_SDHCI_H
  12 #define LINUX_MMC_SDHCI_H
  13
  14 #include <linux/scatterlist.h>
  15 #include <linux/compiler.h>
  16 #include <linux/types.h>
  17 #include <linux/io.h>
  18 #include <linux/mmc/host.h>
  19
  20 struct sdhci_host {
  21         /* Data set by hardware interface driver */
  22         const char *hw_name;    /* Hardware bus name */
  23
  24         unsigned int quirks;    /* Deviations from spec. */
  25
  26 /* Controller doesn't honor resets unless we touch the clock register */
  27 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET                  (1<<0)
  28 /* Controller has bad caps bits, but really supports DMA */
  29 #define SDHCI_QUIRK_FORCE_DMA                           (1<<1)
  30 /* Controller doesn't like to be reset when there is no card inserted. */
  31 #define SDHCI_QUIRK_NO_CARD_NO_RESET                    (1<<2)
  32 /* Controller doesn't like clearing the power reg before a change */
  33 #define SDHCI_QUIRK_SINGLE_POWER_WRITE                  (1<<3)
  34 /* Controller has flaky internal state so reset it on each ios change */
  35 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS               (1<<4)
  36 /* Controller has an unusable DMA engine */
  37 #define SDHCI_QUIRK_BROKEN_DMA                          (1<<5)
  38 /* Controller has an unusable ADMA engine */
  39 #define SDHCI_QUIRK_BROKEN_ADMA                         (1<<6)
  40 /* Controller can only DMA from 32-bit aligned addresses */
  41 #define SDHCI_QUIRK_32BIT_DMA_ADDR                      (1<<7)
  42 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */
  43 #define SDHCI_QUIRK_32BIT_DMA_SIZE                      (1<<8)
  44 /* Controller can only ADMA chunks that are a multiple of 32 bits */
  45 #define SDHCI_QUIRK_32BIT_ADMA_SIZE                     (1<<9)
  46 /* Controller needs to be reset after each request to stay stable */
  47 #define SDHCI_QUIRK_RESET_AFTER_REQUEST                 (1<<10)
  48 /* Controller needs voltage and power writes to happen separately */
  49 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER             (1<<11)
  50 /* Controller provides an incorrect timeout value for transfers */
  51 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL                  (1<<12)
  52 /* Controller has an issue with buffer bits for small transfers */
  53 #define SDHCI_QUIRK_BROKEN_SMALL_PIO                    (1<<13)
  54 /* Controller does not provide transfer-complete interrupt when not busy */
  55 #define SDHCI_QUIRK_NO_BUSY_IRQ                         (1<<14)
  56 /* Controller has unreliable card detection */
  57 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION               (1<<15)
  58 /* Controller reports inverted write-protect state */
  59 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT              (1<<16)
  60 /* Controller has nonstandard clock management */
  61 #define SDHCI_QUIRK_NONSTANDARD_CLOCK                   (1<<17)
  62 /* Controller does not like fast PIO transfers */
  63 #define SDHCI_QUIRK_PIO_NEEDS_DELAY                     (1<<18)
  64 /* Controller losing signal/interrupt enable states after reset */
  65 #define SDHCI_QUIRK_RESTORE_IRQS_AFTER_RESET            (1<<19)
  66 /* Controller has to be forced to use block size of 2048 bytes */
  67 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048                   (1<<20)
  68 /* Controller cannot do multi-block transfers */
  69 #define SDHCI_QUIRK_NO_MULTIBLOCK                       (1<<21)
  70 /* Controller can only handle 1-bit data transfers */
  71 #define SDHCI_QUIRK_FORCE_1_BIT_DATA                    (1<<22)
  72 /* Controller needs 10ms delay between applying power and clock */
  73 #define SDHCI_QUIRK_DELAY_AFTER_POWER                   (1<<23)
  74 /* Controller uses SDCLK instead of TMCLK for data timeouts */
  75 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK             (1<<24)
  76 /* Controller reports wrong base clock capability */
  77 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN               (1<<25)
  78 /* Controller cannot support End Attribute in NOP ADMA descriptor */
  79 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC               (1<<26)
  80 /* Controller is missing device caps. Use caps provided by host */
  81 #define SDHCI_QUIRK_MISSING_CAPS                        (1<<27)
  82 /* Controller uses Auto CMD12 command to stop the transfer */
  83 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12              (1<<28)
  84 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */
  85 #define SDHCI_QUIRK_NO_HISPD_BIT                        (1<<29)
  86 /* Controller treats ADMA descriptors with length 0000h incorrectly */
  87 #define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC            (1<<30)
  88 /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */
  89 #define SDHCI_QUIRK_UNSTABLE_RO_DETECT                  (1<<31)
  90
  91         unsigned int quirks2;   /* More deviations from spec. */
  92
  93         int irq;                /* Device IRQ */
  94         void __iomem *ioaddr;   /* Mapped address */
  95
  96         const struct sdhci_ops *ops;    /* Low level hw interface */
  97
  98         struct regulator *vmmc; /* Power regulator */
  99
 100         /* Internal data */
 101         struct mmc_host *mmc;   /* MMC structure */
 102         u64 dma_mask;           /* custom DMA mask */
 103
 104 #if defined(CONFIG_LEDS_CLASS) || defined(CONFIG_LEDS_CLASS_MODULE)
 105         struct led_classdev led;        /* LED control */
 106         char led_name[32];
 107 #endif
 108
 109         spinlock_t lock;        /* Mutex */
 110
 111         int flags;              /* Host attributes */
 112 #define SDHCI_USE_SDMA          (1<<0)  /* Host is SDMA capable */
 113 #define SDHCI_USE_ADMA          (1<<1)  /* Host is ADMA capable */
 114 #define SDHCI_REQ_USE_DMA       (1<<2)  /* Use DMA for this req. */
 115 #define SDHCI_DEVICE_DEAD       (1<<3)  /* Device unresponsive */
 116 #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */
 117 #define SDHCI_NEEDS_RETUNING    (1<<5)  /* Host needs retuning */
 118 #define SDHCI_AUTO_CMD12        (1<<6)  /* Auto CMD12 support */
 119 #define SDHCI_AUTO_CMD23        (1<<7)  /* Auto CMD23 support */
 120 #define SDHCI_PV_ENABLED        (1<<8)  /* Preset value enabled */
 121 #define SDHCI_SDIO_IRQ_ENABLED  (1<<9)  /* SDIO irq enabled */
 122 #define SDHCI_HS200_NEEDS_TUNING (1<<10)        /* HS200 needs tuning */
 123
 124         unsigned int version;   /* SDHCI spec. version */
 125
 126         unsigned int max_clk;   /* Max possible freq (MHz) */
 127         unsigned int timeout_clk;       /* Timeout freq (KHz) */
 128         unsigned int clk_mul;   /* Clock Muliplier value */
 129
 130         unsigned int clock;     /* Current clock (MHz) */
 131         u8 pwr;                 /* Current voltage */
 132
 133         bool runtime_suspended; /* Host is runtime suspended */
 134
 135         struct mmc_request *mrq;        /* Current request */
 136         struct mmc_command *cmd;        /* Current command */
 137         struct mmc_data *data;  /* Current data request */
 138         unsigned int data_early:1;      /* Data finished before cmd */
 139
 140         struct sg_mapping_iter sg_miter;        /* SG state for PIO */
 141         unsigned int blocks;    /* remaining PIO blocks */
 142
 143         int sg_count;           /* Mapped sg entries */
 144
 145         u8 *adma_desc;          /* ADMA descriptor table */
 146         u8 *align_buffer;       /* Bounce buffer */
 147
 148         dma_addr_t adma_addr;   /* Mapped ADMA descr. table */
 149         dma_addr_t align_addr;  /* Mapped bounce buffer */
 150
 151         struct tasklet_struct card_tasklet;     /* Tasklet structures */
 152         struct tasklet_struct finish_tasklet;
 153
 154         struct timer_list timer;        /* Timer for timeouts */
 155
 156         unsigned int caps;      /* Alternative capabilities */
 157
 158         unsigned int            ocr_avail_sdio; /* OCR bit masks */
 159         unsigned int            ocr_avail_sd;
 160         unsigned int            ocr_avail_mmc;
 161
 162         wait_queue_head_t       buf_ready_int;  /* Waitqueue for Buffer Read Ready interrupt */
 163         unsigned int            tuning_done;    /* Condition flag set when CMD19 succeeds */
 164
 165         unsigned int            tuning_count;   /* Timer count for re-tuning */
 166         unsigned int            tuning_mode;    /* Re-tuning mode supported by host */
 167 #define SDHCI_TUNING_MODE_1     0
 168         struct timer_list       tuning_timer;   /* Timer for tuning */
 169
 170         unsigned long private[0] ____cacheline_aligned;
 171 };
 172 #endif /* LINUX_MMC_SDHCI_H */