2 * Copyright © 1999-2010 David Woodhouse <dwmw2@infradead.org> et al.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
9 * This program is distributed in the hope that it will be useful,
10 * but WITHOUT ANY WARRANTY; without even the implied warranty of
11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 * GNU General Public License for more details.
14 * You should have received a copy of the GNU General Public License
15 * along with this program; if not, write to the Free Software
16 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
23 #include <linux/types.h>
24 #include <linux/uio.h>
25 #include <linux/notifier.h>
26 #include <linux/device.h>
28 #include <mtd/mtd-abi.h>
30 #include <asm/div64.h>
32 #define MTD_CHAR_MAJOR 90
33 #define MTD_BLOCK_MAJOR 31
35 #define MTD_ERASE_PENDING 0x01
36 #define MTD_ERASING 0x02
37 #define MTD_ERASE_SUSPEND 0x04
38 #define MTD_ERASE_DONE 0x08
39 #define MTD_ERASE_FAILED 0x10
41 #define MTD_FAIL_ADDR_UNKNOWN -1LL
44 * If the erase fails, fail_addr might indicate exactly which block failed. If
45 * fail_addr = MTD_FAIL_ADDR_UNKNOWN, the failure was not at the device level
46 * or was not specific to any particular block.
57 void (*callback
) (struct erase_info
*self
);
60 struct erase_info
*next
;
63 struct mtd_erase_region_info
{
64 uint64_t offset
; /* At which this region starts, from the beginning of the MTD */
65 uint32_t erasesize
; /* For this region */
66 uint32_t numblocks
; /* Number of blocks of erasesize in this region */
67 unsigned long *lockmap
; /* If keeping bitmap of locks */
71 * struct mtd_oob_ops - oob operation operands
72 * @mode: operation mode
74 * @len: number of data bytes to write/read
76 * @retlen: number of data bytes written/read
78 * @ooblen: number of oob bytes to write/read
79 * @oobretlen: number of oob bytes written/read
80 * @ooboffs: offset of oob data in the oob area (only relevant when
81 * mode = MTD_OPS_PLACE_OOB or MTD_OPS_RAW)
82 * @datbuf: data buffer - if NULL only oob data are read/written
83 * @oobbuf: oob data buffer
85 * Note, it is allowed to read more than one OOB area at one go, but not write.
86 * The interface assumes that the OOB write requests program only one page's
100 #define MTD_MAX_OOBFREE_ENTRIES_LARGE 32
101 #define MTD_MAX_ECCPOS_ENTRIES_LARGE 448
103 * Internal ECC layout control structure. For historical reasons, there is a
104 * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
105 * for export to user-space via the ECCGETLAYOUT ioctl.
106 * nand_ecclayout should be expandable in the future simply by the above macros.
108 struct nand_ecclayout
{
110 __u32 eccpos
[MTD_MAX_ECCPOS_ENTRIES_LARGE
];
112 struct nand_oobfree oobfree
[MTD_MAX_OOBFREE_ENTRIES_LARGE
];
115 struct module
; /* only needed for owner field in mtd_info */
120 uint64_t size
; // Total size of the MTD
122 /* "Major" erase size for the device. Naïve users may take this
123 * to be the only erase size available, or may use the more detailed
124 * information below if they desire
127 /* Minimal writable flash unit size. In case of NOR flash it is 1 (even
128 * though individual bits can be cleared), in case of NAND flash it is
129 * one NAND page (or half, or one-fourths of it), in case of ECC-ed NOR
130 * it is of ECC block size, etc. It is illegal to have writesize = 0.
131 * Any driver registering a struct mtd_info must ensure a writesize of
137 * Size of the write buffer used by the MTD. MTD devices having a write
138 * buffer can write multiple writesize chunks at a time. E.g. while
139 * writing 4 * writesize bytes to a device with 2 * writesize bytes
140 * buffer the MTD driver can (but doesn't have to) do 2 writesize
141 * operations, but not 4. Currently, all NANDs have writebufsize
142 * equivalent to writesize (NAND page size). Some NOR flashes do have
143 * writebufsize greater than writesize.
145 uint32_t writebufsize
;
147 uint32_t oobsize
; // Amount of OOB data per block (e.g. 16)
148 uint32_t oobavail
; // Available OOB bytes per block
151 * If erasesize is a power of 2 then the shift is stored in
152 * erasesize_shift otherwise erasesize_shift is zero. Ditto writesize.
154 unsigned int erasesize_shift
;
155 unsigned int writesize_shift
;
156 /* Masks based on erasesize_shift and writesize_shift */
157 unsigned int erasesize_mask
;
158 unsigned int writesize_mask
;
160 // Kernel-only stuff starts here.
164 /* ECC layout structure pointer - read only! */
165 struct nand_ecclayout
*ecclayout
;
167 /* Data for variable erase regions. If numeraseregions is zero,
168 * it means that the whole device has erasesize as given above.
171 struct mtd_erase_region_info
*eraseregions
;
174 * Do not call via these pointers, use corresponding mtd_*()
177 int (*erase
) (struct mtd_info
*mtd
, struct erase_info
*instr
);
178 int (*point
) (struct mtd_info
*mtd
, loff_t from
, size_t len
,
179 size_t *retlen
, void **virt
, resource_size_t
*phys
);
180 void (*unpoint
) (struct mtd_info
*mtd
, loff_t from
, size_t len
);
181 unsigned long (*get_unmapped_area
) (struct mtd_info
*mtd
,
183 unsigned long offset
,
184 unsigned long flags
);
185 int (*read
) (struct mtd_info
*mtd
, loff_t from
, size_t len
,
186 size_t *retlen
, u_char
*buf
);
187 int (*write
) (struct mtd_info
*mtd
, loff_t to
, size_t len
,
188 size_t *retlen
, const u_char
*buf
);
189 int (*panic_write
) (struct mtd_info
*mtd
, loff_t to
, size_t len
,
190 size_t *retlen
, const u_char
*buf
);
191 int (*read_oob
) (struct mtd_info
*mtd
, loff_t from
,
192 struct mtd_oob_ops
*ops
);
193 int (*write_oob
) (struct mtd_info
*mtd
, loff_t to
,
194 struct mtd_oob_ops
*ops
);
195 int (*get_fact_prot_info
) (struct mtd_info
*mtd
, struct otp_info
*buf
,
197 int (*read_fact_prot_reg
) (struct mtd_info
*mtd
, loff_t from
,
198 size_t len
, size_t *retlen
, u_char
*buf
);
199 int (*get_user_prot_info
) (struct mtd_info
*mtd
, struct otp_info
*buf
,
201 int (*read_user_prot_reg
) (struct mtd_info
*mtd
, loff_t from
,
202 size_t len
, size_t *retlen
, u_char
*buf
);
203 int (*write_user_prot_reg
) (struct mtd_info
*mtd
, loff_t to
, size_t len
,
204 size_t *retlen
, u_char
*buf
);
205 int (*lock_user_prot_reg
) (struct mtd_info
*mtd
, loff_t from
,
207 int (*writev
) (struct mtd_info
*mtd
, const struct kvec
*vecs
,
208 unsigned long count
, loff_t to
, size_t *retlen
);
209 void (*sync
) (struct mtd_info
*mtd
);
210 int (*lock
) (struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
);
211 int (*unlock
) (struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
);
212 int (*is_locked
) (struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
);
213 int (*block_isbad
) (struct mtd_info
*mtd
, loff_t ofs
);
214 int (*block_markbad
) (struct mtd_info
*mtd
, loff_t ofs
);
215 int (*suspend
) (struct mtd_info
*mtd
);
216 void (*resume
) (struct mtd_info
*mtd
);
218 * If the driver is something smart, like UBI, it may need to maintain
219 * its own reference counting. The below functions are only for driver.
221 int (*get_device
) (struct mtd_info
*mtd
);
222 void (*put_device
) (struct mtd_info
*mtd
);
224 /* Backing device capabilities for this device
225 * - provides mmap capabilities
227 struct backing_dev_info
*backing_dev_info
;
229 struct notifier_block reboot_notifier
; /* default mode before reboot */
231 /* ECC status information */
232 struct mtd_ecc_stats ecc_stats
;
233 /* Subpage shift (NAND) */
238 struct module
*owner
;
244 * Erase is an asynchronous operation. Device drivers are supposed
245 * to call instr->callback() whenever the operation completes, even
246 * if it completes with a failure.
247 * Callers are supposed to pass a callback function and wait for it
248 * to be called before writing to the block.
250 static inline int mtd_erase(struct mtd_info
*mtd
, struct erase_info
*instr
)
252 return mtd
->erase(mtd
, instr
);
256 * This stuff for eXecute-In-Place. phys is optional and may be set to NULL.
258 static inline int mtd_point(struct mtd_info
*mtd
, loff_t from
, size_t len
,
259 size_t *retlen
, void **virt
, resource_size_t
*phys
)
264 return mtd
->point(mtd
, from
, len
, retlen
, virt
, phys
);
267 /* We probably shouldn't allow XIP if the unpoint isn't a NULL */
268 static inline void mtd_unpoint(struct mtd_info
*mtd
, loff_t from
, size_t len
)
270 return mtd
->unpoint(mtd
, from
, len
);
274 * Allow NOMMU mmap() to directly map the device (if not NULL)
275 * - return the address to which the offset maps
276 * - return -ENOSYS to indicate refusal to do the mapping
278 static inline unsigned long mtd_get_unmapped_area(struct mtd_info
*mtd
,
280 unsigned long offset
,
283 if (!mtd
->get_unmapped_area
)
285 return mtd
->get_unmapped_area(mtd
, len
, offset
, flags
);
288 static inline int mtd_read(struct mtd_info
*mtd
, loff_t from
, size_t len
,
289 size_t *retlen
, u_char
*buf
)
291 return mtd
->read(mtd
, from
, len
, retlen
, buf
);
294 static inline int mtd_write(struct mtd_info
*mtd
, loff_t to
, size_t len
,
295 size_t *retlen
, const u_char
*buf
)
300 return mtd
->write(mtd
, to
, len
, retlen
, buf
);
304 * In blackbox flight recorder like scenarios we want to make successful writes
305 * in interrupt context. panic_write() is only intended to be called when its
306 * known the kernel is about to panic and we need the write to succeed. Since
307 * the kernel is not going to be running for much longer, this function can
308 * break locks and delay to ensure the write succeeds (but not sleep).
310 static inline int mtd_panic_write(struct mtd_info
*mtd
, loff_t to
, size_t len
,
311 size_t *retlen
, const u_char
*buf
)
314 if (!mtd
->panic_write
)
316 return mtd
->panic_write(mtd
, to
, len
, retlen
, buf
);
319 static inline int mtd_read_oob(struct mtd_info
*mtd
, loff_t from
,
320 struct mtd_oob_ops
*ops
)
322 ops
->retlen
= ops
->oobretlen
= 0;
325 return mtd
->read_oob(mtd
, from
, ops
);
328 static inline int mtd_write_oob(struct mtd_info
*mtd
, loff_t to
,
329 struct mtd_oob_ops
*ops
)
331 ops
->retlen
= ops
->oobretlen
= 0;
334 return mtd
->write_oob(mtd
, to
, ops
);
338 * Method to access the protection register area, present in some flash
339 * devices. The user data is one time programmable but the factory data is read
342 static inline int mtd_get_fact_prot_info(struct mtd_info
*mtd
,
343 struct otp_info
*buf
, size_t len
)
345 if (!mtd
->get_fact_prot_info
)
347 return mtd
->get_fact_prot_info(mtd
, buf
, len
);
350 static inline int mtd_read_fact_prot_reg(struct mtd_info
*mtd
, loff_t from
,
351 size_t len
, size_t *retlen
,
355 if (!mtd
->read_fact_prot_reg
)
357 return mtd
->read_fact_prot_reg(mtd
, from
, len
, retlen
, buf
);
360 static inline int mtd_get_user_prot_info(struct mtd_info
*mtd
,
361 struct otp_info
*buf
,
364 if (!mtd
->get_user_prot_info
)
366 return mtd
->get_user_prot_info(mtd
, buf
, len
);
369 static inline int mtd_read_user_prot_reg(struct mtd_info
*mtd
, loff_t from
,
370 size_t len
, size_t *retlen
,
374 if (!mtd
->read_user_prot_reg
)
376 return mtd
->read_user_prot_reg(mtd
, from
, len
, retlen
, buf
);
379 static inline int mtd_write_user_prot_reg(struct mtd_info
*mtd
, loff_t to
,
380 size_t len
, size_t *retlen
,
384 if (!mtd
->write_user_prot_reg
)
386 return mtd
->write_user_prot_reg(mtd
, to
, len
, retlen
, buf
);
389 static inline int mtd_lock_user_prot_reg(struct mtd_info
*mtd
, loff_t from
,
392 if (!mtd
->lock_user_prot_reg
)
394 return mtd
->lock_user_prot_reg(mtd
, from
, len
);
397 int mtd_writev(struct mtd_info
*mtd
, const struct kvec
*vecs
,
398 unsigned long count
, loff_t to
, size_t *retlen
);
400 static inline void mtd_sync(struct mtd_info
*mtd
)
406 /* Chip-supported device locking */
407 static inline int mtd_lock(struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
)
411 return mtd
->lock(mtd
, ofs
, len
);
414 static inline int mtd_unlock(struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
)
418 return mtd
->unlock(mtd
, ofs
, len
);
421 static inline int mtd_is_locked(struct mtd_info
*mtd
, loff_t ofs
, uint64_t len
)
425 return mtd
->is_locked(mtd
, ofs
, len
);
428 static inline int mtd_suspend(struct mtd_info
*mtd
)
430 return mtd
->suspend
? mtd
->suspend(mtd
) : 0;
433 static inline void mtd_resume(struct mtd_info
*mtd
)
439 static inline int mtd_block_isbad(struct mtd_info
*mtd
, loff_t ofs
)
441 if (!mtd
->block_isbad
)
443 return mtd
->block_isbad(mtd
, ofs
);
446 static inline int mtd_block_markbad(struct mtd_info
*mtd
, loff_t ofs
)
448 if (!mtd
->block_markbad
)
450 return mtd
->block_markbad(mtd
, ofs
);
453 static inline uint32_t mtd_div_by_eb(uint64_t sz
, struct mtd_info
*mtd
)
455 if (mtd
->erasesize_shift
)
456 return sz
>> mtd
->erasesize_shift
;
457 do_div(sz
, mtd
->erasesize
);
461 static inline uint32_t mtd_mod_by_eb(uint64_t sz
, struct mtd_info
*mtd
)
463 if (mtd
->erasesize_shift
)
464 return sz
& mtd
->erasesize_mask
;
465 return do_div(sz
, mtd
->erasesize
);
468 static inline uint32_t mtd_div_by_ws(uint64_t sz
, struct mtd_info
*mtd
)
470 if (mtd
->writesize_shift
)
471 return sz
>> mtd
->writesize_shift
;
472 do_div(sz
, mtd
->writesize
);
476 static inline uint32_t mtd_mod_by_ws(uint64_t sz
, struct mtd_info
*mtd
)
478 if (mtd
->writesize_shift
)
479 return sz
& mtd
->writesize_mask
;
480 return do_div(sz
, mtd
->writesize
);
483 static inline int mtd_has_oob(const struct mtd_info
*mtd
)
485 return mtd
->read_oob
&& mtd
->write_oob
;
488 static inline int mtd_can_have_bb(const struct mtd_info
*mtd
)
490 return !!mtd
->block_isbad
;
493 /* Kernel-side ioctl definitions */
495 struct mtd_partition
;
496 struct mtd_part_parser_data
;
498 extern int mtd_device_parse_register(struct mtd_info
*mtd
,
499 const char **part_probe_types
,
500 struct mtd_part_parser_data
*parser_data
,
501 const struct mtd_partition
*defparts
,
503 #define mtd_device_register(master, parts, nr_parts) \
504 mtd_device_parse_register(master, NULL, NULL, parts, nr_parts)
505 extern int mtd_device_unregister(struct mtd_info
*master
);
506 extern struct mtd_info
*get_mtd_device(struct mtd_info
*mtd
, int num
);
507 extern int __get_mtd_device(struct mtd_info
*mtd
);
508 extern void __put_mtd_device(struct mtd_info
*mtd
);
509 extern struct mtd_info
*get_mtd_device_nm(const char *name
);
510 extern void put_mtd_device(struct mtd_info
*mtd
);
513 struct mtd_notifier
{
514 void (*add
)(struct mtd_info
*mtd
);
515 void (*remove
)(struct mtd_info
*mtd
);
516 struct list_head list
;
520 extern void register_mtd_user (struct mtd_notifier
*new);
521 extern int unregister_mtd_user (struct mtd_notifier
*old
);
522 void *mtd_kmalloc_up_to(const struct mtd_info
*mtd
, size_t *size
);
524 void mtd_erase_callback(struct erase_info
*instr
);
526 static inline int mtd_is_bitflip(int err
) {
527 return err
== -EUCLEAN
;
530 static inline int mtd_is_eccerr(int err
) {
531 return err
== -EBADMSG
;
534 static inline int mtd_is_bitflip_or_eccerr(int err
) {
535 return mtd_is_bitflip(err
) || mtd_is_eccerr(err
);
538 #endif /* __MTD_MTD_H__ */