2 * linux/kernel/power/swap.c
4 * This file provides functions for reading the suspend image from
5 * and writing it to a swap partition.
7 * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
8 * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
9 * Copyright (C) 2010 Bojan Smojver <bojan@rexursive.com>
11 * This file is released under the GPLv2.
15 #include <linux/module.h>
16 #include <linux/file.h>
17 #include <linux/delay.h>
18 #include <linux/bitops.h>
19 #include <linux/genhd.h>
20 #include <linux/device.h>
21 #include <linux/bio.h>
22 #include <linux/blkdev.h>
23 #include <linux/swap.h>
24 #include <linux/swapops.h>
26 #include <linux/slab.h>
27 #include <linux/lzo.h>
28 #include <linux/vmalloc.h>
29 #include <linux/cpumask.h>
30 #include <linux/atomic.h>
31 #include <linux/kthread.h>
32 #include <linux/crc32.h>
36 #define HIBERNATE_SIG "S1SUSPEND"
39 * The swap map is a data structure used for keeping track of each page
40 * written to a swap partition. It consists of many swap_map_page
41 * structures that contain each an array of MAP_PAGE_ENTRIES swap entries.
42 * These structures are stored on the swap and linked together with the
43 * help of the .next_swap member.
45 * The swap map is created during suspend. The swap map pages are
46 * allocated and populated one at a time, so we only need one memory
47 * page to set up the entire structure.
49 * During resume we pick up all swap_map_page structures into a list.
52 #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1)
55 * Number of free pages that are not high.
57 static inline unsigned long low_free_pages(void)
59 return nr_free_pages() - nr_free_highpages();
63 * Number of pages required to be kept free while writing the image. Always
64 * half of all available low pages before the writing starts.
66 static inline unsigned long reqd_free_pages(void)
68 return low_free_pages() / 2;
71 struct swap_map_page
{
72 sector_t entries
[MAP_PAGE_ENTRIES
];
76 struct swap_map_page_list
{
77 struct swap_map_page
*map
;
78 struct swap_map_page_list
*next
;
82 * The swap_map_handle structure is used for handling swap in
86 struct swap_map_handle
{
87 struct swap_map_page
*cur
;
88 struct swap_map_page_list
*maps
;
90 sector_t first_sector
;
92 unsigned long reqd_free_pages
;
96 struct swsusp_header
{
97 char reserved
[PAGE_SIZE
- 20 - sizeof(sector_t
) - sizeof(int) -
101 unsigned int flags
; /* Flags to pass to the "boot" kernel */
104 } __attribute__((packed
));
106 static struct swsusp_header
*swsusp_header
;
109 * The following functions are used for tracing the allocated
110 * swap pages, so that they can be freed in case of an error.
113 struct swsusp_extent
{
119 static struct rb_root swsusp_extents
= RB_ROOT
;
121 static int swsusp_extents_insert(unsigned long swap_offset
)
123 struct rb_node
**new = &(swsusp_extents
.rb_node
);
124 struct rb_node
*parent
= NULL
;
125 struct swsusp_extent
*ext
;
127 /* Figure out where to put the new node */
129 ext
= container_of(*new, struct swsusp_extent
, node
);
131 if (swap_offset
< ext
->start
) {
133 if (swap_offset
== ext
->start
- 1) {
137 new = &((*new)->rb_left
);
138 } else if (swap_offset
> ext
->end
) {
140 if (swap_offset
== ext
->end
+ 1) {
144 new = &((*new)->rb_right
);
146 /* It already is in the tree */
150 /* Add the new node and rebalance the tree. */
151 ext
= kzalloc(sizeof(struct swsusp_extent
), GFP_KERNEL
);
155 ext
->start
= swap_offset
;
156 ext
->end
= swap_offset
;
157 rb_link_node(&ext
->node
, parent
, new);
158 rb_insert_color(&ext
->node
, &swsusp_extents
);
163 * alloc_swapdev_block - allocate a swap page and register that it has
164 * been allocated, so that it can be freed in case of an error.
167 sector_t
alloc_swapdev_block(int swap
)
169 unsigned long offset
;
171 offset
= swp_offset(get_swap_page_of_type(swap
));
173 if (swsusp_extents_insert(offset
))
174 swap_free(swp_entry(swap
, offset
));
176 return swapdev_block(swap
, offset
);
182 * free_all_swap_pages - free swap pages allocated for saving image data.
183 * It also frees the extents used to register which swap entries had been
187 void free_all_swap_pages(int swap
)
189 struct rb_node
*node
;
191 while ((node
= swsusp_extents
.rb_node
)) {
192 struct swsusp_extent
*ext
;
193 unsigned long offset
;
195 ext
= container_of(node
, struct swsusp_extent
, node
);
196 rb_erase(node
, &swsusp_extents
);
197 for (offset
= ext
->start
; offset
<= ext
->end
; offset
++)
198 swap_free(swp_entry(swap
, offset
));
204 int swsusp_swap_in_use(void)
206 return (swsusp_extents
.rb_node
!= NULL
);
213 static unsigned short root_swap
= 0xffff;
214 struct block_device
*hib_resume_bdev
;
220 static int mark_swapfiles(struct swap_map_handle
*handle
, unsigned int flags
)
224 hib_bio_read_page(swsusp_resume_block
, swsusp_header
, NULL
);
225 if (!memcmp("SWAP-SPACE",swsusp_header
->sig
, 10) ||
226 !memcmp("SWAPSPACE2",swsusp_header
->sig
, 10)) {
227 memcpy(swsusp_header
->orig_sig
,swsusp_header
->sig
, 10);
228 memcpy(swsusp_header
->sig
, HIBERNATE_SIG
, 10);
229 swsusp_header
->image
= handle
->first_sector
;
230 swsusp_header
->flags
= flags
;
231 if (flags
& SF_CRC32_MODE
)
232 swsusp_header
->crc32
= handle
->crc32
;
233 error
= hib_bio_write_page(swsusp_resume_block
,
234 swsusp_header
, NULL
);
236 printk(KERN_ERR
"PM: Swap header not found!\n");
243 * swsusp_swap_check - check if the resume device is a swap device
244 * and get its index (if so)
246 * This is called before saving image
248 static int swsusp_swap_check(void)
252 res
= swap_type_of(swsusp_resume_device
, swsusp_resume_block
,
258 res
= blkdev_get(hib_resume_bdev
, FMODE_WRITE
, NULL
);
262 res
= set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
264 blkdev_put(hib_resume_bdev
, FMODE_WRITE
);
270 * write_page - Write one page to given swap location.
271 * @buf: Address we're writing.
272 * @offset: Offset of the swap page we're writing to.
273 * @bio_chain: Link the next write BIO here
276 static int write_page(void *buf
, sector_t offset
, struct bio
**bio_chain
)
285 src
= (void *)__get_free_page(__GFP_WAIT
| __GFP_HIGH
);
289 ret
= hib_wait_on_bio_chain(bio_chain
); /* Free pages */
292 src
= (void *)__get_free_page(__GFP_WAIT
| __GFP_HIGH
);
297 bio_chain
= NULL
; /* Go synchronous */
304 return hib_bio_write_page(offset
, src
, bio_chain
);
307 static void release_swap_writer(struct swap_map_handle
*handle
)
310 free_page((unsigned long)handle
->cur
);
314 static int get_swap_writer(struct swap_map_handle
*handle
)
318 ret
= swsusp_swap_check();
321 printk(KERN_ERR
"PM: Cannot find swap device, try "
325 handle
->cur
= (struct swap_map_page
*)get_zeroed_page(GFP_KERNEL
);
330 handle
->cur_swap
= alloc_swapdev_block(root_swap
);
331 if (!handle
->cur_swap
) {
336 handle
->reqd_free_pages
= reqd_free_pages();
337 handle
->first_sector
= handle
->cur_swap
;
340 release_swap_writer(handle
);
342 swsusp_close(FMODE_WRITE
);
346 static int swap_write_page(struct swap_map_handle
*handle
, void *buf
,
347 struct bio
**bio_chain
)
354 offset
= alloc_swapdev_block(root_swap
);
355 error
= write_page(buf
, offset
, bio_chain
);
358 handle
->cur
->entries
[handle
->k
++] = offset
;
359 if (handle
->k
>= MAP_PAGE_ENTRIES
) {
360 offset
= alloc_swapdev_block(root_swap
);
363 handle
->cur
->next_swap
= offset
;
364 error
= write_page(handle
->cur
, handle
->cur_swap
, bio_chain
);
367 clear_page(handle
->cur
);
368 handle
->cur_swap
= offset
;
371 if (bio_chain
&& low_free_pages() <= handle
->reqd_free_pages
) {
372 error
= hib_wait_on_bio_chain(bio_chain
);
375 handle
->reqd_free_pages
= reqd_free_pages();
381 static int flush_swap_writer(struct swap_map_handle
*handle
)
383 if (handle
->cur
&& handle
->cur_swap
)
384 return write_page(handle
->cur
, handle
->cur_swap
, NULL
);
389 static int swap_writer_finish(struct swap_map_handle
*handle
,
390 unsigned int flags
, int error
)
393 flush_swap_writer(handle
);
394 printk(KERN_INFO
"PM: S");
395 error
= mark_swapfiles(handle
, flags
);
400 free_all_swap_pages(root_swap
);
401 release_swap_writer(handle
);
402 swsusp_close(FMODE_WRITE
);
407 /* We need to remember how much compressed data we need to read. */
408 #define LZO_HEADER sizeof(size_t)
410 /* Number of pages/bytes we'll compress at one time. */
411 #define LZO_UNC_PAGES 32
412 #define LZO_UNC_SIZE (LZO_UNC_PAGES * PAGE_SIZE)
414 /* Number of pages/bytes we need for compressed data (worst case). */
415 #define LZO_CMP_PAGES DIV_ROUND_UP(lzo1x_worst_compress(LZO_UNC_SIZE) + \
416 LZO_HEADER, PAGE_SIZE)
417 #define LZO_CMP_SIZE (LZO_CMP_PAGES * PAGE_SIZE)
419 /* Maximum number of threads for compression/decompression. */
420 #define LZO_THREADS 3
422 /* Maximum number of pages for read buffering. */
423 #define LZO_READ_PAGES (MAP_PAGE_ENTRIES * 8)
427 * save_image - save the suspend image data
430 static int save_image(struct swap_map_handle
*handle
,
431 struct snapshot_handle
*snapshot
,
432 unsigned int nr_to_write
)
439 struct timeval start
;
442 printk(KERN_INFO
"PM: Saving image data pages (%u pages) ... ",
444 m
= nr_to_write
/ 100;
449 do_gettimeofday(&start
);
451 ret
= snapshot_read_next(snapshot
);
454 ret
= swap_write_page(handle
, data_of(*snapshot
), &bio
);
458 printk(KERN_CONT
"\b\b\b\b%3d%%", nr_pages
/ m
);
461 err2
= hib_wait_on_bio_chain(&bio
);
462 do_gettimeofday(&stop
);
466 printk(KERN_CONT
"\b\b\b\bdone\n");
468 printk(KERN_CONT
"\n");
469 swsusp_show_speed(&start
, &stop
, nr_to_write
, "Wrote");
474 * Structure used for CRC32.
477 struct task_struct
*thr
; /* thread */
478 atomic_t ready
; /* ready to start flag */
479 atomic_t stop
; /* ready to stop flag */
480 unsigned run_threads
; /* nr current threads */
481 wait_queue_head_t go
; /* start crc update */
482 wait_queue_head_t done
; /* crc update done */
483 u32
*crc32
; /* points to handle's crc32 */
484 size_t *unc_len
[LZO_THREADS
]; /* uncompressed lengths */
485 unsigned char *unc
[LZO_THREADS
]; /* uncompressed data */
489 * CRC32 update function that runs in its own thread.
491 static int crc32_threadfn(void *data
)
493 struct crc_data
*d
= data
;
497 wait_event(d
->go
, atomic_read(&d
->ready
) ||
498 kthread_should_stop());
499 if (kthread_should_stop()) {
501 atomic_set(&d
->stop
, 1);
505 atomic_set(&d
->ready
, 0);
507 for (i
= 0; i
< d
->run_threads
; i
++)
508 *d
->crc32
= crc32_le(*d
->crc32
,
509 d
->unc
[i
], *d
->unc_len
[i
]);
510 atomic_set(&d
->stop
, 1);
516 * Structure used for LZO data compression.
519 struct task_struct
*thr
; /* thread */
520 atomic_t ready
; /* ready to start flag */
521 atomic_t stop
; /* ready to stop flag */
522 int ret
; /* return code */
523 wait_queue_head_t go
; /* start compression */
524 wait_queue_head_t done
; /* compression done */
525 size_t unc_len
; /* uncompressed length */
526 size_t cmp_len
; /* compressed length */
527 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
528 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
529 unsigned char wrk
[LZO1X_1_MEM_COMPRESS
]; /* compression workspace */
533 * Compression function that runs in its own thread.
535 static int lzo_compress_threadfn(void *data
)
537 struct cmp_data
*d
= data
;
540 wait_event(d
->go
, atomic_read(&d
->ready
) ||
541 kthread_should_stop());
542 if (kthread_should_stop()) {
545 atomic_set(&d
->stop
, 1);
549 atomic_set(&d
->ready
, 0);
551 d
->ret
= lzo1x_1_compress(d
->unc
, d
->unc_len
,
552 d
->cmp
+ LZO_HEADER
, &d
->cmp_len
,
554 atomic_set(&d
->stop
, 1);
561 * save_image_lzo - Save the suspend image data compressed with LZO.
562 * @handle: Swap mam handle to use for saving the image.
563 * @snapshot: Image to read data from.
564 * @nr_to_write: Number of pages to save.
566 static int save_image_lzo(struct swap_map_handle
*handle
,
567 struct snapshot_handle
*snapshot
,
568 unsigned int nr_to_write
)
575 struct timeval start
;
578 unsigned thr
, run_threads
, nr_threads
;
579 unsigned char *page
= NULL
;
580 struct cmp_data
*data
= NULL
;
581 struct crc_data
*crc
= NULL
;
584 * We'll limit the number of threads for compression to limit memory
587 nr_threads
= num_online_cpus() - 1;
588 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
590 page
= (void *)__get_free_page(__GFP_WAIT
| __GFP_HIGH
);
592 printk(KERN_ERR
"PM: Failed to allocate LZO page\n");
597 data
= vmalloc(sizeof(*data
) * nr_threads
);
599 printk(KERN_ERR
"PM: Failed to allocate LZO data\n");
603 for (thr
= 0; thr
< nr_threads
; thr
++)
604 memset(&data
[thr
], 0, offsetof(struct cmp_data
, go
));
606 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
608 printk(KERN_ERR
"PM: Failed to allocate crc\n");
612 memset(crc
, 0, offsetof(struct crc_data
, go
));
615 * Start the compression threads.
617 for (thr
= 0; thr
< nr_threads
; thr
++) {
618 init_waitqueue_head(&data
[thr
].go
);
619 init_waitqueue_head(&data
[thr
].done
);
621 data
[thr
].thr
= kthread_run(lzo_compress_threadfn
,
623 "image_compress/%u", thr
);
624 if (IS_ERR(data
[thr
].thr
)) {
625 data
[thr
].thr
= NULL
;
627 "PM: Cannot start compression threads\n");
634 * Adjust number of free pages after all allocations have been done.
635 * We don't want to run out of pages when writing.
637 handle
->reqd_free_pages
= reqd_free_pages();
640 * Start the CRC32 thread.
642 init_waitqueue_head(&crc
->go
);
643 init_waitqueue_head(&crc
->done
);
646 crc
->crc32
= &handle
->crc32
;
647 for (thr
= 0; thr
< nr_threads
; thr
++) {
648 crc
->unc
[thr
] = data
[thr
].unc
;
649 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
652 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
653 if (IS_ERR(crc
->thr
)) {
655 printk(KERN_ERR
"PM: Cannot start CRC32 thread\n");
661 "PM: Using %u thread(s) for compression.\n"
662 "PM: Compressing and saving image data (%u pages) ... ",
663 nr_threads
, nr_to_write
);
664 m
= nr_to_write
/ 100;
669 do_gettimeofday(&start
);
671 for (thr
= 0; thr
< nr_threads
; thr
++) {
672 for (off
= 0; off
< LZO_UNC_SIZE
; off
+= PAGE_SIZE
) {
673 ret
= snapshot_read_next(snapshot
);
680 memcpy(data
[thr
].unc
+ off
,
681 data_of(*snapshot
), PAGE_SIZE
);
684 printk(KERN_CONT
"\b\b\b\b%3d%%",
691 data
[thr
].unc_len
= off
;
693 atomic_set(&data
[thr
].ready
, 1);
694 wake_up(&data
[thr
].go
);
700 crc
->run_threads
= thr
;
701 atomic_set(&crc
->ready
, 1);
704 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
705 wait_event(data
[thr
].done
,
706 atomic_read(&data
[thr
].stop
));
707 atomic_set(&data
[thr
].stop
, 0);
712 printk(KERN_ERR
"PM: LZO compression failed\n");
716 if (unlikely(!data
[thr
].cmp_len
||
718 lzo1x_worst_compress(data
[thr
].unc_len
))) {
720 "PM: Invalid LZO compressed length\n");
725 *(size_t *)data
[thr
].cmp
= data
[thr
].cmp_len
;
728 * Given we are writing one page at a time to disk, we
729 * copy that much from the buffer, although the last
730 * bit will likely be smaller than full page. This is
731 * OK - we saved the length of the compressed data, so
732 * any garbage at the end will be discarded when we
736 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
738 memcpy(page
, data
[thr
].cmp
+ off
, PAGE_SIZE
);
740 ret
= swap_write_page(handle
, page
, &bio
);
746 wait_event(crc
->done
, atomic_read(&crc
->stop
));
747 atomic_set(&crc
->stop
, 0);
751 err2
= hib_wait_on_bio_chain(&bio
);
752 do_gettimeofday(&stop
);
756 printk(KERN_CONT
"\b\b\b\bdone\n");
758 printk(KERN_CONT
"\n");
760 swsusp_show_speed(&start
, &stop
, nr_to_write
, "Wrote");
764 kthread_stop(crc
->thr
);
768 for (thr
= 0; thr
< nr_threads
; thr
++)
770 kthread_stop(data
[thr
].thr
);
773 if (page
) free_page((unsigned long)page
);
779 * enough_swap - Make sure we have enough swap to save the image.
781 * Returns TRUE or FALSE after checking the total amount of swap
782 * space avaiable from the resume partition.
785 static int enough_swap(unsigned int nr_pages
, unsigned int flags
)
787 unsigned int free_swap
= count_swap_pages(root_swap
, 1);
788 unsigned int required
;
790 pr_debug("PM: Free swap pages: %u\n", free_swap
);
792 required
= PAGES_FOR_IO
+ nr_pages
;
793 return free_swap
> required
;
797 * swsusp_write - Write entire image and metadata.
798 * @flags: flags to pass to the "boot" kernel in the image header
800 * It is important _NOT_ to umount filesystems at this point. We want
801 * them synced (in case something goes wrong) but we DO not want to mark
802 * filesystem clean: it is not. (And it does not matter, if we resume
803 * correctly, we'll mark system clean, anyway.)
806 int swsusp_write(unsigned int flags
)
808 struct swap_map_handle handle
;
809 struct snapshot_handle snapshot
;
810 struct swsusp_info
*header
;
814 pages
= snapshot_get_image_size();
815 error
= get_swap_writer(&handle
);
817 printk(KERN_ERR
"PM: Cannot get swap writer\n");
820 if (flags
& SF_NOCOMPRESS_MODE
) {
821 if (!enough_swap(pages
, flags
)) {
822 printk(KERN_ERR
"PM: Not enough free swap\n");
827 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
828 error
= snapshot_read_next(&snapshot
);
829 if (error
< PAGE_SIZE
) {
835 header
= (struct swsusp_info
*)data_of(snapshot
);
836 error
= swap_write_page(&handle
, header
, NULL
);
838 error
= (flags
& SF_NOCOMPRESS_MODE
) ?
839 save_image(&handle
, &snapshot
, pages
- 1) :
840 save_image_lzo(&handle
, &snapshot
, pages
- 1);
843 error
= swap_writer_finish(&handle
, flags
, error
);
848 * The following functions allow us to read data using a swap map
849 * in a file-alike way
852 static void release_swap_reader(struct swap_map_handle
*handle
)
854 struct swap_map_page_list
*tmp
;
856 while (handle
->maps
) {
857 if (handle
->maps
->map
)
858 free_page((unsigned long)handle
->maps
->map
);
860 handle
->maps
= handle
->maps
->next
;
866 static int get_swap_reader(struct swap_map_handle
*handle
,
867 unsigned int *flags_p
)
870 struct swap_map_page_list
*tmp
, *last
;
873 *flags_p
= swsusp_header
->flags
;
875 if (!swsusp_header
->image
) /* how can this happen? */
879 last
= handle
->maps
= NULL
;
880 offset
= swsusp_header
->image
;
882 tmp
= kmalloc(sizeof(*handle
->maps
), GFP_KERNEL
);
884 release_swap_reader(handle
);
887 memset(tmp
, 0, sizeof(*tmp
));
894 tmp
->map
= (struct swap_map_page
*)
895 __get_free_page(__GFP_WAIT
| __GFP_HIGH
);
897 release_swap_reader(handle
);
901 error
= hib_bio_read_page(offset
, tmp
->map
, NULL
);
903 release_swap_reader(handle
);
906 offset
= tmp
->map
->next_swap
;
909 handle
->cur
= handle
->maps
->map
;
913 static int swap_read_page(struct swap_map_handle
*handle
, void *buf
,
914 struct bio
**bio_chain
)
918 struct swap_map_page_list
*tmp
;
922 offset
= handle
->cur
->entries
[handle
->k
];
925 error
= hib_bio_read_page(offset
, buf
, bio_chain
);
928 if (++handle
->k
>= MAP_PAGE_ENTRIES
) {
930 free_page((unsigned long)handle
->maps
->map
);
932 handle
->maps
= handle
->maps
->next
;
935 release_swap_reader(handle
);
937 handle
->cur
= handle
->maps
->map
;
942 static int swap_reader_finish(struct swap_map_handle
*handle
)
944 release_swap_reader(handle
);
950 * load_image - load the image using the swap map handle
951 * @handle and the snapshot handle @snapshot
952 * (assume there are @nr_pages pages to load)
955 static int load_image(struct swap_map_handle
*handle
,
956 struct snapshot_handle
*snapshot
,
957 unsigned int nr_to_read
)
961 struct timeval start
;
967 printk(KERN_INFO
"PM: Loading image data pages (%u pages) ... ",
969 m
= nr_to_read
/ 100;
974 do_gettimeofday(&start
);
976 ret
= snapshot_write_next(snapshot
);
979 ret
= swap_read_page(handle
, data_of(*snapshot
), &bio
);
982 if (snapshot
->sync_read
)
983 ret
= hib_wait_on_bio_chain(&bio
);
987 printk("\b\b\b\b%3d%%", nr_pages
/ m
);
990 err2
= hib_wait_on_bio_chain(&bio
);
991 do_gettimeofday(&stop
);
995 printk("\b\b\b\bdone\n");
996 snapshot_write_finalize(snapshot
);
997 if (!snapshot_image_loaded(snapshot
))
1001 swsusp_show_speed(&start
, &stop
, nr_to_read
, "Read");
1006 * Structure used for LZO data decompression.
1009 struct task_struct
*thr
; /* thread */
1010 atomic_t ready
; /* ready to start flag */
1011 atomic_t stop
; /* ready to stop flag */
1012 int ret
; /* return code */
1013 wait_queue_head_t go
; /* start decompression */
1014 wait_queue_head_t done
; /* decompression done */
1015 size_t unc_len
; /* uncompressed length */
1016 size_t cmp_len
; /* compressed length */
1017 unsigned char unc
[LZO_UNC_SIZE
]; /* uncompressed buffer */
1018 unsigned char cmp
[LZO_CMP_SIZE
]; /* compressed buffer */
1022 * Deompression function that runs in its own thread.
1024 static int lzo_decompress_threadfn(void *data
)
1026 struct dec_data
*d
= data
;
1029 wait_event(d
->go
, atomic_read(&d
->ready
) ||
1030 kthread_should_stop());
1031 if (kthread_should_stop()) {
1034 atomic_set(&d
->stop
, 1);
1038 atomic_set(&d
->ready
, 0);
1040 d
->unc_len
= LZO_UNC_SIZE
;
1041 d
->ret
= lzo1x_decompress_safe(d
->cmp
+ LZO_HEADER
, d
->cmp_len
,
1042 d
->unc
, &d
->unc_len
);
1043 atomic_set(&d
->stop
, 1);
1050 * load_image_lzo - Load compressed image data and decompress them with LZO.
1051 * @handle: Swap map handle to use for loading data.
1052 * @snapshot: Image to copy uncompressed data into.
1053 * @nr_to_read: Number of pages to load.
1055 static int load_image_lzo(struct swap_map_handle
*handle
,
1056 struct snapshot_handle
*snapshot
,
1057 unsigned int nr_to_read
)
1063 struct timeval start
;
1064 struct timeval stop
;
1067 unsigned i
, thr
, run_threads
, nr_threads
;
1068 unsigned ring
= 0, pg
= 0, ring_size
= 0,
1069 have
= 0, want
, need
, asked
= 0;
1070 unsigned long read_pages
;
1071 unsigned char **page
= NULL
;
1072 struct dec_data
*data
= NULL
;
1073 struct crc_data
*crc
= NULL
;
1076 * We'll limit the number of threads for decompression to limit memory
1079 nr_threads
= num_online_cpus() - 1;
1080 nr_threads
= clamp_val(nr_threads
, 1, LZO_THREADS
);
1082 page
= vmalloc(sizeof(*page
) * LZO_READ_PAGES
);
1084 printk(KERN_ERR
"PM: Failed to allocate LZO page\n");
1089 data
= vmalloc(sizeof(*data
) * nr_threads
);
1091 printk(KERN_ERR
"PM: Failed to allocate LZO data\n");
1095 for (thr
= 0; thr
< nr_threads
; thr
++)
1096 memset(&data
[thr
], 0, offsetof(struct dec_data
, go
));
1098 crc
= kmalloc(sizeof(*crc
), GFP_KERNEL
);
1100 printk(KERN_ERR
"PM: Failed to allocate crc\n");
1104 memset(crc
, 0, offsetof(struct crc_data
, go
));
1107 * Start the decompression threads.
1109 for (thr
= 0; thr
< nr_threads
; thr
++) {
1110 init_waitqueue_head(&data
[thr
].go
);
1111 init_waitqueue_head(&data
[thr
].done
);
1113 data
[thr
].thr
= kthread_run(lzo_decompress_threadfn
,
1115 "image_decompress/%u", thr
);
1116 if (IS_ERR(data
[thr
].thr
)) {
1117 data
[thr
].thr
= NULL
;
1119 "PM: Cannot start decompression threads\n");
1126 * Start the CRC32 thread.
1128 init_waitqueue_head(&crc
->go
);
1129 init_waitqueue_head(&crc
->done
);
1132 crc
->crc32
= &handle
->crc32
;
1133 for (thr
= 0; thr
< nr_threads
; thr
++) {
1134 crc
->unc
[thr
] = data
[thr
].unc
;
1135 crc
->unc_len
[thr
] = &data
[thr
].unc_len
;
1138 crc
->thr
= kthread_run(crc32_threadfn
, crc
, "image_crc32");
1139 if (IS_ERR(crc
->thr
)) {
1141 printk(KERN_ERR
"PM: Cannot start CRC32 thread\n");
1147 * Adjust number of pages for read buffering, in case we are short.
1149 read_pages
= (nr_free_pages() - snapshot_get_image_size()) >> 1;
1150 read_pages
= clamp_val(read_pages
, LZO_CMP_PAGES
, LZO_READ_PAGES
);
1152 for (i
= 0; i
< read_pages
; i
++) {
1153 page
[i
] = (void *)__get_free_page(i
< LZO_CMP_PAGES
?
1154 __GFP_WAIT
| __GFP_HIGH
:
1157 if (i
< LZO_CMP_PAGES
) {
1160 "PM: Failed to allocate LZO pages\n");
1168 want
= ring_size
= i
;
1171 "PM: Using %u thread(s) for decompression.\n"
1172 "PM: Loading and decompressing image data (%u pages) ... ",
1173 nr_threads
, nr_to_read
);
1174 m
= nr_to_read
/ 100;
1179 do_gettimeofday(&start
);
1181 ret
= snapshot_write_next(snapshot
);
1186 for (i
= 0; !eof
&& i
< want
; i
++) {
1187 ret
= swap_read_page(handle
, page
[ring
], &bio
);
1190 * On real read error, finish. On end of data,
1191 * set EOF flag and just exit the read loop.
1194 handle
->cur
->entries
[handle
->k
]) {
1201 if (++ring
>= ring_size
)
1208 * We are out of data, wait for some more.
1214 ret
= hib_wait_on_bio_chain(&bio
);
1223 if (crc
->run_threads
) {
1224 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1225 atomic_set(&crc
->stop
, 0);
1226 crc
->run_threads
= 0;
1229 for (thr
= 0; have
&& thr
< nr_threads
; thr
++) {
1230 data
[thr
].cmp_len
= *(size_t *)page
[pg
];
1231 if (unlikely(!data
[thr
].cmp_len
||
1233 lzo1x_worst_compress(LZO_UNC_SIZE
))) {
1235 "PM: Invalid LZO compressed length\n");
1240 need
= DIV_ROUND_UP(data
[thr
].cmp_len
+ LZO_HEADER
,
1251 off
< LZO_HEADER
+ data
[thr
].cmp_len
;
1253 memcpy(data
[thr
].cmp
+ off
,
1254 page
[pg
], PAGE_SIZE
);
1257 if (++pg
>= ring_size
)
1261 atomic_set(&data
[thr
].ready
, 1);
1262 wake_up(&data
[thr
].go
);
1266 * Wait for more data while we are decompressing.
1268 if (have
< LZO_CMP_PAGES
&& asked
) {
1269 ret
= hib_wait_on_bio_chain(&bio
);
1278 for (run_threads
= thr
, thr
= 0; thr
< run_threads
; thr
++) {
1279 wait_event(data
[thr
].done
,
1280 atomic_read(&data
[thr
].stop
));
1281 atomic_set(&data
[thr
].stop
, 0);
1283 ret
= data
[thr
].ret
;
1287 "PM: LZO decompression failed\n");
1291 if (unlikely(!data
[thr
].unc_len
||
1292 data
[thr
].unc_len
> LZO_UNC_SIZE
||
1293 data
[thr
].unc_len
& (PAGE_SIZE
- 1))) {
1295 "PM: Invalid LZO uncompressed length\n");
1301 off
< data
[thr
].unc_len
; off
+= PAGE_SIZE
) {
1302 memcpy(data_of(*snapshot
),
1303 data
[thr
].unc
+ off
, PAGE_SIZE
);
1305 if (!(nr_pages
% m
))
1306 printk("\b\b\b\b%3d%%", nr_pages
/ m
);
1309 ret
= snapshot_write_next(snapshot
);
1311 crc
->run_threads
= thr
+ 1;
1312 atomic_set(&crc
->ready
, 1);
1319 crc
->run_threads
= thr
;
1320 atomic_set(&crc
->ready
, 1);
1325 if (crc
->run_threads
) {
1326 wait_event(crc
->done
, atomic_read(&crc
->stop
));
1327 atomic_set(&crc
->stop
, 0);
1329 do_gettimeofday(&stop
);
1331 printk("\b\b\b\bdone\n");
1332 snapshot_write_finalize(snapshot
);
1333 if (!snapshot_image_loaded(snapshot
))
1336 if (swsusp_header
->flags
& SF_CRC32_MODE
) {
1337 if(handle
->crc32
!= swsusp_header
->crc32
) {
1339 "PM: Invalid image CRC32!\n");
1346 swsusp_show_speed(&start
, &stop
, nr_to_read
, "Read");
1348 for (i
= 0; i
< ring_size
; i
++)
1349 free_page((unsigned long)page
[i
]);
1352 kthread_stop(crc
->thr
);
1356 for (thr
= 0; thr
< nr_threads
; thr
++)
1358 kthread_stop(data
[thr
].thr
);
1361 if (page
) vfree(page
);
1367 * swsusp_read - read the hibernation image.
1368 * @flags_p: flags passed by the "frozen" kernel in the image header should
1369 * be written into this memory location
1372 int swsusp_read(unsigned int *flags_p
)
1375 struct swap_map_handle handle
;
1376 struct snapshot_handle snapshot
;
1377 struct swsusp_info
*header
;
1379 memset(&snapshot
, 0, sizeof(struct snapshot_handle
));
1380 error
= snapshot_write_next(&snapshot
);
1381 if (error
< PAGE_SIZE
)
1382 return error
< 0 ? error
: -EFAULT
;
1383 header
= (struct swsusp_info
*)data_of(snapshot
);
1384 error
= get_swap_reader(&handle
, flags_p
);
1388 error
= swap_read_page(&handle
, header
, NULL
);
1390 error
= (*flags_p
& SF_NOCOMPRESS_MODE
) ?
1391 load_image(&handle
, &snapshot
, header
->pages
- 1) :
1392 load_image_lzo(&handle
, &snapshot
, header
->pages
- 1);
1394 swap_reader_finish(&handle
);
1397 pr_debug("PM: Image successfully loaded\n");
1399 pr_debug("PM: Error %d resuming\n", error
);
1404 * swsusp_check - Check for swsusp signature in the resume device
1407 int swsusp_check(void)
1411 hib_resume_bdev
= blkdev_get_by_dev(swsusp_resume_device
,
1413 if (!IS_ERR(hib_resume_bdev
)) {
1414 set_blocksize(hib_resume_bdev
, PAGE_SIZE
);
1415 clear_page(swsusp_header
);
1416 error
= hib_bio_read_page(swsusp_resume_block
,
1417 swsusp_header
, NULL
);
1421 if (!memcmp(HIBERNATE_SIG
, swsusp_header
->sig
, 10)) {
1422 memcpy(swsusp_header
->sig
, swsusp_header
->orig_sig
, 10);
1423 /* Reset swap signature now */
1424 error
= hib_bio_write_page(swsusp_resume_block
,
1425 swsusp_header
, NULL
);
1432 blkdev_put(hib_resume_bdev
, FMODE_READ
);
1434 pr_debug("PM: Image signature found, resuming\n");
1436 error
= PTR_ERR(hib_resume_bdev
);
1440 pr_debug("PM: Image not found (code %d)\n", error
);
1446 * swsusp_close - close swap device.
1449 void swsusp_close(fmode_t mode
)
1451 if (IS_ERR(hib_resume_bdev
)) {
1452 pr_debug("PM: Image device not initialised\n");
1456 blkdev_put(hib_resume_bdev
, mode
);
1459 static int swsusp_header_init(void)
1461 swsusp_header
= (struct swsusp_header
*) __get_free_page(GFP_KERNEL
);
1463 panic("Could not allocate memory for swsusp_header\n");
1467 core_initcall(swsusp_header_init
);