?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
Merge tag 'v3.3.7' into 3.3/master
[zen-stable.git] / sound / soc / codecs / wm8904.c
blobf31c754c8865abd5b21ee61c3e47b810f73721a6
1 /*
2 * wm8904.c -- WM8904 ALSA SoC Audio driver
3 *
4 * Copyright 2009 Wolfson Microelectronics plc
5 *
6 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
7 *
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 */
13
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/init.h>
17 #include <linux/delay.h>
18 #include <linux/pm.h>
19 #include <linux/i2c.h>
20 #include <linux/regulator/consumer.h>
21 #include <linux/slab.h>
22 #include <sound/core.h>
23 #include <sound/pcm.h>
24 #include <sound/pcm_params.h>
25 #include <sound/soc.h>
26 #include <sound/initval.h>
27 #include <sound/tlv.h>
28 #include <sound/wm8904.h>
29
30 #include "wm8904.h"
31
32 enum wm8904_type {
33 WM8904,
34 WM8912,
35 };
36
37 #define WM8904_NUM_DCS_CHANNELS 4
38
39 #define WM8904_NUM_SUPPLIES 5
40 static const char *wm8904_supply_names[WM8904_NUM_SUPPLIES] = {
41 "DCVDD",
42 "DBVDD",
43 "AVDD",
44 "CPVDD",
45 "MICVDD",
46 };
47
48 /* codec private data */
49 struct wm8904_priv {
50
51 enum wm8904_type devtype;
52
53 struct regulator_bulk_data supplies[WM8904_NUM_SUPPLIES];
54
55 struct wm8904_pdata *pdata;
56
57 int deemph;
58
59 /* Platform provided DRC configuration */
60 const char **drc_texts;
61 int drc_cfg;
62 struct soc_enum drc_enum;
63
64 /* Platform provided ReTune mobile configuration */
65 int num_retune_mobile_texts;
66 const char **retune_mobile_texts;
67 int retune_mobile_cfg;
68 struct soc_enum retune_mobile_enum;
69
70 /* FLL setup */
71 int fll_src;
72 int fll_fref;
73 int fll_fout;
74
75 /* Clocking configuration */
76 unsigned int mclk_rate;
77 int sysclk_src;
78 unsigned int sysclk_rate;
79
80 int tdm_width;
81 int tdm_slots;
82 int bclk;
83 int fs;
84
85 /* DC servo configuration - cached offset values */
86 int dcs_state[WM8904_NUM_DCS_CHANNELS];
87 };
88
89 static const u16 wm8904_reg[WM8904_MAX_REGISTER + 1] = {
90 0x8904, /* R0 - SW Reset and ID */
91 0x0000, /* R1 - Revision */
92 0x0000, /* R2 */
93 0x0000, /* R3 */
94 0x0018, /* R4 - Bias Control 0 */
95 0x0000, /* R5 - VMID Control 0 */
96 0x0000, /* R6 - Mic Bias Control 0 */
97 0x0000, /* R7 - Mic Bias Control 1 */
98 0x0001, /* R8 - Analogue DAC 0 */
99 0x9696, /* R9 - mic Filter Control */
100 0x0001, /* R10 - Analogue ADC 0 */
101 0x0000, /* R11 */
102 0x0000, /* R12 - Power Management 0 */
103 0x0000, /* R13 */
104 0x0000, /* R14 - Power Management 2 */
105 0x0000, /* R15 - Power Management 3 */
106 0x0000, /* R16 */
107 0x0000, /* R17 */
108 0x0000, /* R18 - Power Management 6 */
109 0x0000, /* R19 */
110 0x945E, /* R20 - Clock Rates 0 */
111 0x0C05, /* R21 - Clock Rates 1 */
112 0x0006, /* R22 - Clock Rates 2 */
113 0x0000, /* R23 */
114 0x0050, /* R24 - Audio Interface 0 */
115 0x000A, /* R25 - Audio Interface 1 */
116 0x00E4, /* R26 - Audio Interface 2 */
117 0x0040, /* R27 - Audio Interface 3 */
118 0x0000, /* R28 */
119 0x0000, /* R29 */
120 0x00C0, /* R30 - DAC Digital Volume Left */
121 0x00C0, /* R31 - DAC Digital Volume Right */
122 0x0000, /* R32 - DAC Digital 0 */
123 0x0008, /* R33 - DAC Digital 1 */
124 0x0000, /* R34 */
125 0x0000, /* R35 */
126 0x00C0, /* R36 - ADC Digital Volume Left */
127 0x00C0, /* R37 - ADC Digital Volume Right */
128 0x0010, /* R38 - ADC Digital 0 */
129 0x0000, /* R39 - Digital Microphone 0 */
130 0x01AF, /* R40 - DRC 0 */
131 0x3248, /* R41 - DRC 1 */
132 0x0000, /* R42 - DRC 2 */
133 0x0000, /* R43 - DRC 3 */
134 0x0085, /* R44 - Analogue Left Input 0 */
135 0x0085, /* R45 - Analogue Right Input 0 */
136 0x0044, /* R46 - Analogue Left Input 1 */
137 0x0044, /* R47 - Analogue Right Input 1 */
138 0x0000, /* R48 */
139 0x0000, /* R49 */
140 0x0000, /* R50 */
141 0x0000, /* R51 */
142 0x0000, /* R52 */
143 0x0000, /* R53 */
144 0x0000, /* R54 */
145 0x0000, /* R55 */
146 0x0000, /* R56 */
147 0x002D, /* R57 - Analogue OUT1 Left */
148 0x002D, /* R58 - Analogue OUT1 Right */
149 0x0039, /* R59 - Analogue OUT2 Left */
150 0x0039, /* R60 - Analogue OUT2 Right */
151 0x0000, /* R61 - Analogue OUT12 ZC */
152 0x0000, /* R62 */
153 0x0000, /* R63 */
154 0x0000, /* R64 */
155 0x0000, /* R65 */
156 0x0000, /* R66 */
157 0x0000, /* R67 - DC Servo 0 */
158 0x0000, /* R68 - DC Servo 1 */
159 0xAAAA, /* R69 - DC Servo 2 */
160 0x0000, /* R70 */
161 0xAAAA, /* R71 - DC Servo 4 */
162 0xAAAA, /* R72 - DC Servo 5 */
163 0x0000, /* R73 - DC Servo 6 */
164 0x0000, /* R74 - DC Servo 7 */
165 0x0000, /* R75 - DC Servo 8 */
166 0x0000, /* R76 - DC Servo 9 */
167 0x0000, /* R77 - DC Servo Readback 0 */
168 0x0000, /* R78 */
169 0x0000, /* R79 */
170 0x0000, /* R80 */
171 0x0000, /* R81 */
172 0x0000, /* R82 */
173 0x0000, /* R83 */
174 0x0000, /* R84 */
175 0x0000, /* R85 */
176 0x0000, /* R86 */
177 0x0000, /* R87 */
178 0x0000, /* R88 */
179 0x0000, /* R89 */
180 0x0000, /* R90 - Analogue HP 0 */
181 0x0000, /* R91 */
182 0x0000, /* R92 */
183 0x0000, /* R93 */
184 0x0000, /* R94 - Analogue Lineout 0 */
185 0x0000, /* R95 */
186 0x0000, /* R96 */
187 0x0000, /* R97 */
188 0x0000, /* R98 - Charge Pump 0 */
189 0x0000, /* R99 */
190 0x0000, /* R100 */
191 0x0000, /* R101 */
192 0x0000, /* R102 */
193 0x0000, /* R103 */
194 0x0004, /* R104 - Class W 0 */
195 0x0000, /* R105 */
196 0x0000, /* R106 */
197 0x0000, /* R107 */
198 0x0000, /* R108 - Write Sequencer 0 */
199 0x0000, /* R109 - Write Sequencer 1 */
200 0x0000, /* R110 - Write Sequencer 2 */
201 0x0000, /* R111 - Write Sequencer 3 */
202 0x0000, /* R112 - Write Sequencer 4 */
203 0x0000, /* R113 */
204 0x0000, /* R114 */
205 0x0000, /* R115 */
206 0x0000, /* R116 - FLL Control 1 */
207 0x0007, /* R117 - FLL Control 2 */
208 0x0000, /* R118 - FLL Control 3 */
209 0x2EE0, /* R119 - FLL Control 4 */
210 0x0004, /* R120 - FLL Control 5 */
211 0x0014, /* R121 - GPIO Control 1 */
212 0x0010, /* R122 - GPIO Control 2 */
213 0x0010, /* R123 - GPIO Control 3 */
214 0x0000, /* R124 - GPIO Control 4 */
215 0x0000, /* R125 */
216 0x0000, /* R126 - Digital Pulls */
217 0x0000, /* R127 - Interrupt Status */
218 0xFFFF, /* R128 - Interrupt Status Mask */
219 0x0000, /* R129 - Interrupt Polarity */
220 0x0000, /* R130 - Interrupt Debounce */
221 0x0000, /* R131 */
222 0x0000, /* R132 */
223 0x0000, /* R133 */
224 0x0000, /* R134 - EQ1 */
225 0x000C, /* R135 - EQ2 */
226 0x000C, /* R136 - EQ3 */
227 0x000C, /* R137 - EQ4 */
228 0x000C, /* R138 - EQ5 */
229 0x000C, /* R139 - EQ6 */
230 0x0FCA, /* R140 - EQ7 */
231 0x0400, /* R141 - EQ8 */
232 0x00D8, /* R142 - EQ9 */
233 0x1EB5, /* R143 - EQ10 */
234 0xF145, /* R144 - EQ11 */
235 0x0B75, /* R145 - EQ12 */
236 0x01C5, /* R146 - EQ13 */
237 0x1C58, /* R147 - EQ14 */
238 0xF373, /* R148 - EQ15 */
239 0x0A54, /* R149 - EQ16 */
240 0x0558, /* R150 - EQ17 */
241 0x168E, /* R151 - EQ18 */
242 0xF829, /* R152 - EQ19 */
243 0x07AD, /* R153 - EQ20 */
244 0x1103, /* R154 - EQ21 */
245 0x0564, /* R155 - EQ22 */
246 0x0559, /* R156 - EQ23 */
247 0x4000, /* R157 - EQ24 */
248 0x0000, /* R158 */
249 0x0000, /* R159 */
250 0x0000, /* R160 */
251 0x0000, /* R161 - Control Interface Test 1 */
252 0x0000, /* R162 */
253 0x0000, /* R163 */
254 0x0000, /* R164 */
255 0x0000, /* R165 */
256 0x0000, /* R166 */
257 0x0000, /* R167 */
258 0x0000, /* R168 */
259 0x0000, /* R169 */
260 0x0000, /* R170 */
261 0x0000, /* R171 */
262 0x0000, /* R172 */
263 0x0000, /* R173 */
264 0x0000, /* R174 */
265 0x0000, /* R175 */
266 0x0000, /* R176 */
267 0x0000, /* R177 */
268 0x0000, /* R178 */
269 0x0000, /* R179 */
270 0x0000, /* R180 */
271 0x0000, /* R181 */
272 0x0000, /* R182 */
273 0x0000, /* R183 */
274 0x0000, /* R184 */
275 0x0000, /* R185 */
276 0x0000, /* R186 */
277 0x0000, /* R187 */
278 0x0000, /* R188 */
279 0x0000, /* R189 */
280 0x0000, /* R190 */
281 0x0000, /* R191 */
282 0x0000, /* R192 */
283 0x0000, /* R193 */
284 0x0000, /* R194 */
285 0x0000, /* R195 */
286 0x0000, /* R196 */
287 0x0000, /* R197 */
288 0x0000, /* R198 */
289 0x0000, /* R199 */
290 0x0000, /* R200 */
291 0x0000, /* R201 */
292 0x0000, /* R202 */
293 0x0000, /* R203 */
294 0x0000, /* R204 - Analogue Output Bias 0 */
295 0x0000, /* R205 */
296 0x0000, /* R206 */
297 0x0000, /* R207 */
298 0x0000, /* R208 */
299 0x0000, /* R209 */
300 0x0000, /* R210 */
301 0x0000, /* R211 */
302 0x0000, /* R212 */
303 0x0000, /* R213 */
304 0x0000, /* R214 */
305 0x0000, /* R215 */
306 0x0000, /* R216 */
307 0x0000, /* R217 */
308 0x0000, /* R218 */
309 0x0000, /* R219 */
310 0x0000, /* R220 */
311 0x0000, /* R221 */
312 0x0000, /* R222 */
313 0x0000, /* R223 */
314 0x0000, /* R224 */
315 0x0000, /* R225 */
316 0x0000, /* R226 */
317 0x0000, /* R227 */
318 0x0000, /* R228 */
319 0x0000, /* R229 */
320 0x0000, /* R230 */
321 0x0000, /* R231 */
322 0x0000, /* R232 */
323 0x0000, /* R233 */
324 0x0000, /* R234 */
325 0x0000, /* R235 */
326 0x0000, /* R236 */
327 0x0000, /* R237 */
328 0x0000, /* R238 */
329 0x0000, /* R239 */
330 0x0000, /* R240 */
331 0x0000, /* R241 */
332 0x0000, /* R242 */
333 0x0000, /* R243 */
334 0x0000, /* R244 */
335 0x0000, /* R245 */
336 0x0000, /* R246 */
337 0x0000, /* R247 - FLL NCO Test 0 */
338 0x0019, /* R248 - FLL NCO Test 1 */
339 };
340
341 static struct {
342 int readable;
343 int writable;
344 int vol;
345 } wm8904_access[] = {
346 { 0xFFFF, 0xFFFF, 1 }, /* R0 - SW Reset and ID */
347 { 0x0000, 0x0000, 0 }, /* R1 - Revision */
348 { 0x0000, 0x0000, 0 }, /* R2 */
349 { 0x0000, 0x0000, 0 }, /* R3 */
350 { 0x001F, 0x001F, 0 }, /* R4 - Bias Control 0 */
351 { 0x0047, 0x0047, 0 }, /* R5 - VMID Control 0 */
352 { 0x007F, 0x007F, 0 }, /* R6 - Mic Bias Control 0 */
353 { 0xC007, 0xC007, 0 }, /* R7 - Mic Bias Control 1 */
354 { 0x001E, 0x001E, 0 }, /* R8 - Analogue DAC 0 */
355 { 0xFFFF, 0xFFFF, 0 }, /* R9 - mic Filter Control */
356 { 0x0001, 0x0001, 0 }, /* R10 - Analogue ADC 0 */
357 { 0x0000, 0x0000, 0 }, /* R11 */
358 { 0x0003, 0x0003, 0 }, /* R12 - Power Management 0 */
359 { 0x0000, 0x0000, 0 }, /* R13 */
360 { 0x0003, 0x0003, 0 }, /* R14 - Power Management 2 */
361 { 0x0003, 0x0003, 0 }, /* R15 - Power Management 3 */
362 { 0x0000, 0x0000, 0 }, /* R16 */
363 { 0x0000, 0x0000, 0 }, /* R17 */
364 { 0x000F, 0x000F, 0 }, /* R18 - Power Management 6 */
365 { 0x0000, 0x0000, 0 }, /* R19 */
366 { 0x7001, 0x7001, 0 }, /* R20 - Clock Rates 0 */
367 { 0x3C07, 0x3C07, 0 }, /* R21 - Clock Rates 1 */
368 { 0xD00F, 0xD00F, 0 }, /* R22 - Clock Rates 2 */
369 { 0x0000, 0x0000, 0 }, /* R23 */
370 { 0x1FFF, 0x1FFF, 0 }, /* R24 - Audio Interface 0 */
371 { 0x3DDF, 0x3DDF, 0 }, /* R25 - Audio Interface 1 */
372 { 0x0F1F, 0x0F1F, 0 }, /* R26 - Audio Interface 2 */
373 { 0x0FFF, 0x0FFF, 0 }, /* R27 - Audio Interface 3 */
374 { 0x0000, 0x0000, 0 }, /* R28 */
375 { 0x0000, 0x0000, 0 }, /* R29 */
376 { 0x00FF, 0x01FF, 0 }, /* R30 - DAC Digital Volume Left */
377 { 0x00FF, 0x01FF, 0 }, /* R31 - DAC Digital Volume Right */
378 { 0x0FFF, 0x0FFF, 0 }, /* R32 - DAC Digital 0 */
379 { 0x1E4E, 0x1E4E, 0 }, /* R33 - DAC Digital 1 */
380 { 0x0000, 0x0000, 0 }, /* R34 */
381 { 0x0000, 0x0000, 0 }, /* R35 */
382 { 0x00FF, 0x01FF, 0 }, /* R36 - ADC Digital Volume Left */
383 { 0x00FF, 0x01FF, 0 }, /* R37 - ADC Digital Volume Right */
384 { 0x0073, 0x0073, 0 }, /* R38 - ADC Digital 0 */
385 { 0x1800, 0x1800, 0 }, /* R39 - Digital Microphone 0 */
386 { 0xDFEF, 0xDFEF, 0 }, /* R40 - DRC 0 */
387 { 0xFFFF, 0xFFFF, 0 }, /* R41 - DRC 1 */
388 { 0x003F, 0x003F, 0 }, /* R42 - DRC 2 */
389 { 0x07FF, 0x07FF, 0 }, /* R43 - DRC 3 */
390 { 0x009F, 0x009F, 0 }, /* R44 - Analogue Left Input 0 */
391 { 0x009F, 0x009F, 0 }, /* R45 - Analogue Right Input 0 */
392 { 0x007F, 0x007F, 0 }, /* R46 - Analogue Left Input 1 */
393 { 0x007F, 0x007F, 0 }, /* R47 - Analogue Right Input 1 */
394 { 0x0000, 0x0000, 0 }, /* R48 */
395 { 0x0000, 0x0000, 0 }, /* R49 */
396 { 0x0000, 0x0000, 0 }, /* R50 */
397 { 0x0000, 0x0000, 0 }, /* R51 */
398 { 0x0000, 0x0000, 0 }, /* R52 */
399 { 0x0000, 0x0000, 0 }, /* R53 */
400 { 0x0000, 0x0000, 0 }, /* R54 */
401 { 0x0000, 0x0000, 0 }, /* R55 */
402 { 0x0000, 0x0000, 0 }, /* R56 */
403 { 0x017F, 0x01FF, 0 }, /* R57 - Analogue OUT1 Left */
404 { 0x017F, 0x01FF, 0 }, /* R58 - Analogue OUT1 Right */
405 { 0x017F, 0x01FF, 0 }, /* R59 - Analogue OUT2 Left */
406 { 0x017F, 0x01FF, 0 }, /* R60 - Analogue OUT2 Right */
407 { 0x000F, 0x000F, 0 }, /* R61 - Analogue OUT12 ZC */
408 { 0x0000, 0x0000, 0 }, /* R62 */
409 { 0x0000, 0x0000, 0 }, /* R63 */
410 { 0x0000, 0x0000, 0 }, /* R64 */
411 { 0x0000, 0x0000, 0 }, /* R65 */
412 { 0x0000, 0x0000, 0 }, /* R66 */
413 { 0x000F, 0x000F, 0 }, /* R67 - DC Servo 0 */
414 { 0xFFFF, 0xFFFF, 1 }, /* R68 - DC Servo 1 */
415 { 0x0F0F, 0x0F0F, 0 }, /* R69 - DC Servo 2 */
416 { 0x0000, 0x0000, 0 }, /* R70 */
417 { 0x007F, 0x007F, 0 }, /* R71 - DC Servo 4 */
418 { 0x007F, 0x007F, 0 }, /* R72 - DC Servo 5 */
419 { 0x00FF, 0x00FF, 1 }, /* R73 - DC Servo 6 */
420 { 0x00FF, 0x00FF, 1 }, /* R74 - DC Servo 7 */
421 { 0x00FF, 0x00FF, 1 }, /* R75 - DC Servo 8 */
422 { 0x00FF, 0x00FF, 1 }, /* R76 - DC Servo 9 */
423 { 0x0FFF, 0x0000, 1 }, /* R77 - DC Servo Readback 0 */
424 { 0x0000, 0x0000, 0 }, /* R78 */
425 { 0x0000, 0x0000, 0 }, /* R79 */
426 { 0x0000, 0x0000, 0 }, /* R80 */
427 { 0x0000, 0x0000, 0 }, /* R81 */
428 { 0x0000, 0x0000, 0 }, /* R82 */
429 { 0x0000, 0x0000, 0 }, /* R83 */
430 { 0x0000, 0x0000, 0 }, /* R84 */
431 { 0x0000, 0x0000, 0 }, /* R85 */
432 { 0x0000, 0x0000, 0 }, /* R86 */
433 { 0x0000, 0x0000, 0 }, /* R87 */
434 { 0x0000, 0x0000, 0 }, /* R88 */
435 { 0x0000, 0x0000, 0 }, /* R89 */
436 { 0x00FF, 0x00FF, 0 }, /* R90 - Analogue HP 0 */
437 { 0x0000, 0x0000, 0 }, /* R91 */
438 { 0x0000, 0x0000, 0 }, /* R92 */
439 { 0x0000, 0x0000, 0 }, /* R93 */
440 { 0x00FF, 0x00FF, 0 }, /* R94 - Analogue Lineout 0 */
441 { 0x0000, 0x0000, 0 }, /* R95 */
442 { 0x0000, 0x0000, 0 }, /* R96 */
443 { 0x0000, 0x0000, 0 }, /* R97 */
444 { 0x0001, 0x0001, 0 }, /* R98 - Charge Pump 0 */
445 { 0x0000, 0x0000, 0 }, /* R99 */
446 { 0x0000, 0x0000, 0 }, /* R100 */
447 { 0x0000, 0x0000, 0 }, /* R101 */
448 { 0x0000, 0x0000, 0 }, /* R102 */
449 { 0x0000, 0x0000, 0 }, /* R103 */
450 { 0x0001, 0x0001, 0 }, /* R104 - Class W 0 */
451 { 0x0000, 0x0000, 0 }, /* R105 */
452 { 0x0000, 0x0000, 0 }, /* R106 */
453 { 0x0000, 0x0000, 0 }, /* R107 */
454 { 0x011F, 0x011F, 0 }, /* R108 - Write Sequencer 0 */
455 { 0x7FFF, 0x7FFF, 0 }, /* R109 - Write Sequencer 1 */
456 { 0x4FFF, 0x4FFF, 0 }, /* R110 - Write Sequencer 2 */
457 { 0x003F, 0x033F, 0 }, /* R111 - Write Sequencer 3 */
458 { 0x03F1, 0x0000, 0 }, /* R112 - Write Sequencer 4 */
459 { 0x0000, 0x0000, 0 }, /* R113 */
460 { 0x0000, 0x0000, 0 }, /* R114 */
461 { 0x0000, 0x0000, 0 }, /* R115 */
462 { 0x0007, 0x0007, 0 }, /* R116 - FLL Control 1 */
463 { 0x3F77, 0x3F77, 0 }, /* R117 - FLL Control 2 */
464 { 0xFFFF, 0xFFFF, 0 }, /* R118 - FLL Control 3 */
465 { 0x7FEF, 0x7FEF, 0 }, /* R119 - FLL Control 4 */
466 { 0x001B, 0x001B, 0 }, /* R120 - FLL Control 5 */
467 { 0x003F, 0x003F, 0 }, /* R121 - GPIO Control 1 */
468 { 0x003F, 0x003F, 0 }, /* R122 - GPIO Control 2 */
469 { 0x003F, 0x003F, 0 }, /* R123 - GPIO Control 3 */
470 { 0x038F, 0x038F, 0 }, /* R124 - GPIO Control 4 */
471 { 0x0000, 0x0000, 0 }, /* R125 */
472 { 0x00FF, 0x00FF, 0 }, /* R126 - Digital Pulls */
473 { 0x07FF, 0x03FF, 1 }, /* R127 - Interrupt Status */
474 { 0x03FF, 0x03FF, 0 }, /* R128 - Interrupt Status Mask */
475 { 0x03FF, 0x03FF, 0 }, /* R129 - Interrupt Polarity */
476 { 0x03FF, 0x03FF, 0 }, /* R130 - Interrupt Debounce */
477 { 0x0000, 0x0000, 0 }, /* R131 */
478 { 0x0000, 0x0000, 0 }, /* R132 */
479 { 0x0000, 0x0000, 0 }, /* R133 */
480 { 0x0001, 0x0001, 0 }, /* R134 - EQ1 */
481 { 0x001F, 0x001F, 0 }, /* R135 - EQ2 */
482 { 0x001F, 0x001F, 0 }, /* R136 - EQ3 */
483 { 0x001F, 0x001F, 0 }, /* R137 - EQ4 */
484 { 0x001F, 0x001F, 0 }, /* R138 - EQ5 */
485 { 0x001F, 0x001F, 0 }, /* R139 - EQ6 */
486 { 0xFFFF, 0xFFFF, 0 }, /* R140 - EQ7 */
487 { 0xFFFF, 0xFFFF, 0 }, /* R141 - EQ8 */
488 { 0xFFFF, 0xFFFF, 0 }, /* R142 - EQ9 */
489 { 0xFFFF, 0xFFFF, 0 }, /* R143 - EQ10 */
490 { 0xFFFF, 0xFFFF, 0 }, /* R144 - EQ11 */
491 { 0xFFFF, 0xFFFF, 0 }, /* R145 - EQ12 */
492 { 0xFFFF, 0xFFFF, 0 }, /* R146 - EQ13 */
493 { 0xFFFF, 0xFFFF, 0 }, /* R147 - EQ14 */
494 { 0xFFFF, 0xFFFF, 0 }, /* R148 - EQ15 */
495 { 0xFFFF, 0xFFFF, 0 }, /* R149 - EQ16 */
496 { 0xFFFF, 0xFFFF, 0 }, /* R150 - EQ17 */
497 { 0xFFFF, 0xFFFF, 0 }, /* R151wm8523_dai - EQ18 */
498 { 0xFFFF, 0xFFFF, 0 }, /* R152 - EQ19 */
499 { 0xFFFF, 0xFFFF, 0 }, /* R153 - EQ20 */
500 { 0xFFFF, 0xFFFF, 0 }, /* R154 - EQ21 */
501 { 0xFFFF, 0xFFFF, 0 }, /* R155 - EQ22 */
502 { 0xFFFF, 0xFFFF, 0 }, /* R156 - EQ23 */
503 { 0xFFFF, 0xFFFF, 0 }, /* R157 - EQ24 */
504 { 0x0000, 0x0000, 0 }, /* R158 */
505 { 0x0000, 0x0000, 0 }, /* R159 */
506 { 0x0000, 0x0000, 0 }, /* R160 */
507 { 0x0002, 0x0002, 0 }, /* R161 - Control Interface Test 1 */
508 { 0x0000, 0x0000, 0 }, /* R162 */
509 { 0x0000, 0x0000, 0 }, /* R163 */
510 { 0x0000, 0x0000, 0 }, /* R164 */
511 { 0x0000, 0x0000, 0 }, /* R165 */
512 { 0x0000, 0x0000, 0 }, /* R166 */
513 { 0x0000, 0x0000, 0 }, /* R167 */
514 { 0x0000, 0x0000, 0 }, /* R168 */
515 { 0x0000, 0x0000, 0 }, /* R169 */
516 { 0x0000, 0x0000, 0 }, /* R170 */
517 { 0x0000, 0x0000, 0 }, /* R171 */
518 { 0x0000, 0x0000, 0 }, /* R172 */
519 { 0x0000, 0x0000, 0 }, /* R173 */
520 { 0x0000, 0x0000, 0 }, /* R174 */
521 { 0x0000, 0x0000, 0 }, /* R175 */
522 { 0x0000, 0x0000, 0 }, /* R176 */
523 { 0x0000, 0x0000, 0 }, /* R177 */
524 { 0x0000, 0x0000, 0 }, /* R178 */
525 { 0x0000, 0x0000, 0 }, /* R179 */
526 { 0x0000, 0x0000, 0 }, /* R180 */
527 { 0x0000, 0x0000, 0 }, /* R181 */
528 { 0x0000, 0x0000, 0 }, /* R182 */
529 { 0x0000, 0x0000, 0 }, /* R183 */
530 { 0x0000, 0x0000, 0 }, /* R184 */
531 { 0x0000, 0x0000, 0 }, /* R185 */
532 { 0x0000, 0x0000, 0 }, /* R186 */
533 { 0x0000, 0x0000, 0 }, /* R187 */
534 { 0x0000, 0x0000, 0 }, /* R188 */
535 { 0x0000, 0x0000, 0 }, /* R189 */
536 { 0x0000, 0x0000, 0 }, /* R190 */
537 { 0x0000, 0x0000, 0 }, /* R191 */
538 { 0x0000, 0x0000, 0 }, /* R192 */
539 { 0x0000, 0x0000, 0 }, /* R193 */
540 { 0x0000, 0x0000, 0 }, /* R194 */
541 { 0x0000, 0x0000, 0 }, /* R195 */
542 { 0x0000, 0x0000, 0 }, /* R196 */
543 { 0x0000, 0x0000, 0 }, /* R197 */
544 { 0x0000, 0x0000, 0 }, /* R198 */
545 { 0x0000, 0x0000, 0 }, /* R199 */
546 { 0x0000, 0x0000, 0 }, /* R200 */
547 { 0x0000, 0x0000, 0 }, /* R201 */
548 { 0x0000, 0x0000, 0 }, /* R202 */
549 { 0x0000, 0x0000, 0 }, /* R203 */
550 { 0x0070, 0x0070, 0 }, /* R204 - Analogue Output Bias 0 */
551 { 0x0000, 0x0000, 0 }, /* R205 */
552 { 0x0000, 0x0000, 0 }, /* R206 */
553 { 0x0000, 0x0000, 0 }, /* R207 */
554 { 0x0000, 0x0000, 0 }, /* R208 */
555 { 0x0000, 0x0000, 0 }, /* R209 */
556 { 0x0000, 0x0000, 0 }, /* R210 */
557 { 0x0000, 0x0000, 0 }, /* R211 */
558 { 0x0000, 0x0000, 0 }, /* R212 */
559 { 0x0000, 0x0000, 0 }, /* R213 */
560 { 0x0000, 0x0000, 0 }, /* R214 */
561 { 0x0000, 0x0000, 0 }, /* R215 */
562 { 0x0000, 0x0000, 0 }, /* R216 */
563 { 0x0000, 0x0000, 0 }, /* R217 */
564 { 0x0000, 0x0000, 0 }, /* R218 */
565 { 0x0000, 0x0000, 0 }, /* R219 */
566 { 0x0000, 0x0000, 0 }, /* R220 */
567 { 0x0000, 0x0000, 0 }, /* R221 */
568 { 0x0000, 0x0000, 0 }, /* R222 */
569 { 0x0000, 0x0000, 0 }, /* R223 */
570 { 0x0000, 0x0000, 0 }, /* R224 */
571 { 0x0000, 0x0000, 0 }, /* R225 */
572 { 0x0000, 0x0000, 0 }, /* R226 */
573 { 0x0000, 0x0000, 0 }, /* R227 */
574 { 0x0000, 0x0000, 0 }, /* R228 */
575 { 0x0000, 0x0000, 0 }, /* R229 */
576 { 0x0000, 0x0000, 0 }, /* R230 */
577 { 0x0000, 0x0000, 0 }, /* R231 */
578 { 0x0000, 0x0000, 0 }, /* R232 */
579 { 0x0000, 0x0000, 0 }, /* R233 */
580 { 0x0000, 0x0000, 0 }, /* R234 */
581 { 0x0000, 0x0000, 0 }, /* R235 */
582 { 0x0000, 0x0000, 0 }, /* R236 */
583 { 0x0000, 0x0000, 0 }, /* R237 */
584 { 0x0000, 0x0000, 0 }, /* R238 */
585 { 0x0000, 0x0000, 0 }, /* R239 */
586 { 0x0000, 0x0000, 0 }, /* R240 */
587 { 0x0000, 0x0000, 0 }, /* R241 */
588 { 0x0000, 0x0000, 0 }, /* R242 */
589 { 0x0000, 0x0000, 0 }, /* R243 */
590 { 0x0000, 0x0000, 0 }, /* R244 */
591 { 0x0000, 0x0000, 0 }, /* R245 */
592 { 0x0000, 0x0000, 0 }, /* R246 */
593 { 0x0001, 0x0001, 0 }, /* R247 - FLL NCO Test 0 */
594 { 0x003F, 0x003F, 0 }, /* R248 - FLL NCO Test 1 */
595 };
596
597 static int wm8904_volatile_register(struct snd_soc_codec *codec, unsigned int reg)
598 {
599 return wm8904_access[reg].vol;
600 }
601
602 static int wm8904_reset(struct snd_soc_codec *codec)
603 {
604 return snd_soc_write(codec, WM8904_SW_RESET_AND_ID, 0);
605 }
606
607 static int wm8904_configure_clocking(struct snd_soc_codec *codec)
608 {
609 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
610 unsigned int clock0, clock2, rate;
611
612 /* Gate the clock while we're updating to avoid misclocking */
613 clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
614 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
615 WM8904_SYSCLK_SRC, 0);
616
617 /* This should be done on init() for bypass paths */
618 switch (wm8904->sysclk_src) {
619 case WM8904_CLK_MCLK:
620 dev_dbg(codec->dev, "Using %dHz MCLK\n", wm8904->mclk_rate);
621
622 clock2 &= ~WM8904_SYSCLK_SRC;
623 rate = wm8904->mclk_rate;
624
625 /* Ensure the FLL is stopped */
626 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
627 WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
628 break;
629
630 case WM8904_CLK_FLL:
631 dev_dbg(codec->dev, "Using %dHz FLL clock\n",
632 wm8904->fll_fout);
633
634 clock2 |= WM8904_SYSCLK_SRC;
635 rate = wm8904->fll_fout;
636 break;
637
638 default:
639 dev_err(codec->dev, "System clock not configured\n");
640 return -EINVAL;
641 }
642
643 /* SYSCLK shouldn't be over 13.5MHz */
644 if (rate > 13500000) {
645 clock0 = WM8904_MCLK_DIV;
646 wm8904->sysclk_rate = rate / 2;
647 } else {
648 clock0 = 0;
649 wm8904->sysclk_rate = rate;
650 }
651
652 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_0, WM8904_MCLK_DIV,
653 clock0);
654
655 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
656 WM8904_CLK_SYS_ENA | WM8904_SYSCLK_SRC, clock2);
657
658 dev_dbg(codec->dev, "CLK_SYS is %dHz\n", wm8904->sysclk_rate);
659
660 return 0;
661 }
662
663 static void wm8904_set_drc(struct snd_soc_codec *codec)
664 {
665 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
666 struct wm8904_pdata *pdata = wm8904->pdata;
667 int save, i;
668
669 /* Save any enables; the configuration should clear them. */
670 save = snd_soc_read(codec, WM8904_DRC_0);
671
672 for (i = 0; i < WM8904_DRC_REGS; i++)
673 snd_soc_update_bits(codec, WM8904_DRC_0 + i, 0xffff,
674 pdata->drc_cfgs[wm8904->drc_cfg].regs[i]);
675
676 /* Reenable the DRC */
677 snd_soc_update_bits(codec, WM8904_DRC_0,
678 WM8904_DRC_ENA | WM8904_DRC_DAC_PATH, save);
679 }
680
681 static int wm8904_put_drc_enum(struct snd_kcontrol *kcontrol,
682 struct snd_ctl_elem_value *ucontrol)
683 {
684 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
685 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
686 struct wm8904_pdata *pdata = wm8904->pdata;
687 int value = ucontrol->value.integer.value[0];
688
689 if (value >= pdata->num_drc_cfgs)
690 return -EINVAL;
691
692 wm8904->drc_cfg = value;
693
694 wm8904_set_drc(codec);
695
696 return 0;
697 }
698
699 static int wm8904_get_drc_enum(struct snd_kcontrol *kcontrol,
700 struct snd_ctl_elem_value *ucontrol)
701 {
702 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
703 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
704
705 ucontrol->value.enumerated.item[0] = wm8904->drc_cfg;
706
707 return 0;
708 }
709
710 static void wm8904_set_retune_mobile(struct snd_soc_codec *codec)
711 {
712 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
713 struct wm8904_pdata *pdata = wm8904->pdata;
714 int best, best_val, save, i, cfg;
715
716 if (!pdata || !wm8904->num_retune_mobile_texts)
717 return;
718
719 /* Find the version of the currently selected configuration
720 * with the nearest sample rate. */
721 cfg = wm8904->retune_mobile_cfg;
722 best = 0;
723 best_val = INT_MAX;
724 for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
725 if (strcmp(pdata->retune_mobile_cfgs[i].name,
726 wm8904->retune_mobile_texts[cfg]) == 0 &&
727 abs(pdata->retune_mobile_cfgs[i].rate
728 - wm8904->fs) < best_val) {
729 best = i;
730 best_val = abs(pdata->retune_mobile_cfgs[i].rate
731 - wm8904->fs);
732 }
733 }
734
735 dev_dbg(codec->dev, "ReTune Mobile %s/%dHz for %dHz sample rate\n",
736 pdata->retune_mobile_cfgs[best].name,
737 pdata->retune_mobile_cfgs[best].rate,
738 wm8904->fs);
739
740 /* The EQ will be disabled while reconfiguring it, remember the
741 * current configuration.
742 */
743 save = snd_soc_read(codec, WM8904_EQ1);
744
745 for (i = 0; i < WM8904_EQ_REGS; i++)
746 snd_soc_update_bits(codec, WM8904_EQ1 + i, 0xffff,
747 pdata->retune_mobile_cfgs[best].regs[i]);
748
749 snd_soc_update_bits(codec, WM8904_EQ1, WM8904_EQ_ENA, save);
750 }
751
752 static int wm8904_put_retune_mobile_enum(struct snd_kcontrol *kcontrol,
753 struct snd_ctl_elem_value *ucontrol)
754 {
755 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
756 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
757 struct wm8904_pdata *pdata = wm8904->pdata;
758 int value = ucontrol->value.integer.value[0];
759
760 if (value >= pdata->num_retune_mobile_cfgs)
761 return -EINVAL;
762
763 wm8904->retune_mobile_cfg = value;
764
765 wm8904_set_retune_mobile(codec);
766
767 return 0;
768 }
769
770 static int wm8904_get_retune_mobile_enum(struct snd_kcontrol *kcontrol,
771 struct snd_ctl_elem_value *ucontrol)
772 {
773 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
774 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
775
776 ucontrol->value.enumerated.item[0] = wm8904->retune_mobile_cfg;
777
778 return 0;
779 }
780
781 static int deemph_settings[] = { 0, 32000, 44100, 48000 };
782
783 static int wm8904_set_deemph(struct snd_soc_codec *codec)
784 {
785 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
786 int val, i, best;
787
788 /* If we're using deemphasis select the nearest available sample
789 * rate.
790 */
791 if (wm8904->deemph) {
792 best = 1;
793 for (i = 2; i < ARRAY_SIZE(deemph_settings); i++) {
794 if (abs(deemph_settings[i] - wm8904->fs) <
795 abs(deemph_settings[best] - wm8904->fs))
796 best = i;
797 }
798
799 val = best << WM8904_DEEMPH_SHIFT;
800 } else {
801 val = 0;
802 }
803
804 dev_dbg(codec->dev, "Set deemphasis %d\n", val);
805
806 return snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
807 WM8904_DEEMPH_MASK, val);
808 }
809
810 static int wm8904_get_deemph(struct snd_kcontrol *kcontrol,
811 struct snd_ctl_elem_value *ucontrol)
812 {
813 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
814 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
815
816 ucontrol->value.enumerated.item[0] = wm8904->deemph;
817 return 0;
818 }
819
820 static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
821 struct snd_ctl_elem_value *ucontrol)
822 {
823 struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
824 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
825 int deemph = ucontrol->value.enumerated.item[0];
826
827 if (deemph > 1)
828 return -EINVAL;
829
830 wm8904->deemph = deemph;
831
832 return wm8904_set_deemph(codec);
833 }
834
835 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
836 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
837 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
838 static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
839 static const DECLARE_TLV_DB_SCALE(eq_tlv, -1200, 100, 0);
840
841 static const char *input_mode_text[] = {
842 "Single-Ended", "Differential Line", "Differential Mic"
843 };
844
845 static const struct soc_enum lin_mode =
846 SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 0, 3, input_mode_text);
847
848 static const struct soc_enum rin_mode =
849 SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 0, 3, input_mode_text);
850
851 static const char *hpf_mode_text[] = {
852 "Hi-fi", "Voice 1", "Voice 2", "Voice 3"
853 };
854
855 static const struct soc_enum hpf_mode =
856 SOC_ENUM_SINGLE(WM8904_ADC_DIGITAL_0, 5, 4, hpf_mode_text);
857
858 static const struct snd_kcontrol_new wm8904_adc_snd_controls[] = {
859 SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8904_ADC_DIGITAL_VOLUME_LEFT,
860 WM8904_ADC_DIGITAL_VOLUME_RIGHT, 1, 119, 0, digital_tlv),
861
862 SOC_ENUM("Left Caputure Mode", lin_mode),
863 SOC_ENUM("Right Capture Mode", rin_mode),
864
865 /* No TLV since it depends on mode */
866 SOC_DOUBLE_R("Capture Volume", WM8904_ANALOGUE_LEFT_INPUT_0,
867 WM8904_ANALOGUE_RIGHT_INPUT_0, 0, 31, 0),
868 SOC_DOUBLE_R("Capture Switch", WM8904_ANALOGUE_LEFT_INPUT_0,
869 WM8904_ANALOGUE_RIGHT_INPUT_0, 7, 1, 1),
870
871 SOC_SINGLE("High Pass Filter Switch", WM8904_ADC_DIGITAL_0, 4, 1, 0),
872 SOC_ENUM("High Pass Filter Mode", hpf_mode),
873
874 SOC_SINGLE("ADC 128x OSR Switch", WM8904_ANALOGUE_ADC_0, 0, 1, 0),
875 };
876
877 static const char *drc_path_text[] = {
878 "ADC", "DAC"
879 };
880
881 static const struct soc_enum drc_path =
882 SOC_ENUM_SINGLE(WM8904_DRC_0, 14, 2, drc_path_text);
883
884 static const struct snd_kcontrol_new wm8904_dac_snd_controls[] = {
885 SOC_SINGLE_TLV("Digital Playback Boost Volume",
886 WM8904_AUDIO_INTERFACE_0, 9, 3, 0, dac_boost_tlv),
887 SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8904_DAC_DIGITAL_VOLUME_LEFT,
888 WM8904_DAC_DIGITAL_VOLUME_RIGHT, 1, 96, 0, digital_tlv),
889
890 SOC_DOUBLE_R_TLV("Headphone Volume", WM8904_ANALOGUE_OUT1_LEFT,
891 WM8904_ANALOGUE_OUT1_RIGHT, 0, 63, 0, out_tlv),
892 SOC_DOUBLE_R("Headphone Switch", WM8904_ANALOGUE_OUT1_LEFT,
893 WM8904_ANALOGUE_OUT1_RIGHT, 8, 1, 1),
894 SOC_DOUBLE_R("Headphone ZC Switch", WM8904_ANALOGUE_OUT1_LEFT,
895 WM8904_ANALOGUE_OUT1_RIGHT, 6, 1, 0),
896
897 SOC_DOUBLE_R_TLV("Line Output Volume", WM8904_ANALOGUE_OUT2_LEFT,
898 WM8904_ANALOGUE_OUT2_RIGHT, 0, 63, 0, out_tlv),
899 SOC_DOUBLE_R("Line Output Switch", WM8904_ANALOGUE_OUT2_LEFT,
900 WM8904_ANALOGUE_OUT2_RIGHT, 8, 1, 1),
901 SOC_DOUBLE_R("Line Output ZC Switch", WM8904_ANALOGUE_OUT2_LEFT,
902 WM8904_ANALOGUE_OUT2_RIGHT, 6, 1, 0),
903
904 SOC_SINGLE("EQ Switch", WM8904_EQ1, 0, 1, 0),
905 SOC_SINGLE("DRC Switch", WM8904_DRC_0, 15, 1, 0),
906 SOC_ENUM("DRC Path", drc_path),
907 SOC_SINGLE("DAC OSRx2 Switch", WM8904_DAC_DIGITAL_1, 6, 1, 0),
908 SOC_SINGLE_BOOL_EXT("DAC Deemphasis Switch", 0,
909 wm8904_get_deemph, wm8904_put_deemph),
910 };
911
912 static const struct snd_kcontrol_new wm8904_snd_controls[] = {
913 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8904_DAC_DIGITAL_0, 4, 8, 15, 0,
914 sidetone_tlv),
915 };
916
917 static const struct snd_kcontrol_new wm8904_eq_controls[] = {
918 SOC_SINGLE_TLV("EQ1 Volume", WM8904_EQ2, 0, 24, 0, eq_tlv),
919 SOC_SINGLE_TLV("EQ2 Volume", WM8904_EQ3, 0, 24, 0, eq_tlv),
920 SOC_SINGLE_TLV("EQ3 Volume", WM8904_EQ4, 0, 24, 0, eq_tlv),
921 SOC_SINGLE_TLV("EQ4 Volume", WM8904_EQ5, 0, 24, 0, eq_tlv),
922 SOC_SINGLE_TLV("EQ5 Volume", WM8904_EQ6, 0, 24, 0, eq_tlv),
923 };
924
925 static int cp_event(struct snd_soc_dapm_widget *w,
926 struct snd_kcontrol *kcontrol, int event)
927 {
928 BUG_ON(event != SND_SOC_DAPM_POST_PMU);
929
930 /* Maximum startup time */
931 udelay(500);
932
933 return 0;
934 }
935
936 static int sysclk_event(struct snd_soc_dapm_widget *w,
937 struct snd_kcontrol *kcontrol, int event)
938 {
939 struct snd_soc_codec *codec = w->codec;
940 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
941
942 switch (event) {
943 case SND_SOC_DAPM_PRE_PMU:
944 /* If we're using the FLL then we only start it when
945 * required; we assume that the configuration has been
946 * done previously and all we need to do is kick it
947 * off.
948 */
949 switch (wm8904->sysclk_src) {
950 case WM8904_CLK_FLL:
951 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
952 WM8904_FLL_OSC_ENA,
953 WM8904_FLL_OSC_ENA);
954
955 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
956 WM8904_FLL_ENA,
957 WM8904_FLL_ENA);
958 break;
959
960 default:
961 break;
962 }
963 break;
964
965 case SND_SOC_DAPM_POST_PMD:
966 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
967 WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
968 break;
969 }
970
971 return 0;
972 }
973
974 static int out_pga_event(struct snd_soc_dapm_widget *w,
975 struct snd_kcontrol *kcontrol, int event)
976 {
977 struct snd_soc_codec *codec = w->codec;
978 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
979 int reg, val;
980 int dcs_mask;
981 int dcs_l, dcs_r;
982 int dcs_l_reg, dcs_r_reg;
983 int timeout;
984 int pwr_reg;
985
986 /* This code is shared between HP and LINEOUT; we do all our
987 * power management in stereo pairs to avoid latency issues so
988 * we reuse shift to identify which rather than strcmp() the
989 * name. */
990 reg = w->shift;
991
992 switch (reg) {
993 case WM8904_ANALOGUE_HP_0:
994 pwr_reg = WM8904_POWER_MANAGEMENT_2;
995 dcs_mask = WM8904_DCS_ENA_CHAN_0 | WM8904_DCS_ENA_CHAN_1;
996 dcs_r_reg = WM8904_DC_SERVO_8;
997 dcs_l_reg = WM8904_DC_SERVO_9;
998 dcs_l = 0;
999 dcs_r = 1;
1000 break;
1001 case WM8904_ANALOGUE_LINEOUT_0:
1002 pwr_reg = WM8904_POWER_MANAGEMENT_3;
1003 dcs_mask = WM8904_DCS_ENA_CHAN_2 | WM8904_DCS_ENA_CHAN_3;
1004 dcs_r_reg = WM8904_DC_SERVO_6;
1005 dcs_l_reg = WM8904_DC_SERVO_7;
1006 dcs_l = 2;
1007 dcs_r = 3;
1008 break;
1009 default:
1010 BUG();
1011 return -EINVAL;
1012 }
1013
1014 switch (event) {
1015 case SND_SOC_DAPM_PRE_PMU:
1016 /* Power on the PGAs */
1017 snd_soc_update_bits(codec, pwr_reg,
1018 WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
1019 WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA);
1020
1021 /* Power on the amplifier */
1022 snd_soc_update_bits(codec, reg,
1023 WM8904_HPL_ENA | WM8904_HPR_ENA,
1024 WM8904_HPL_ENA | WM8904_HPR_ENA);
1025
1026
1027 /* Enable the first stage */
1028 snd_soc_update_bits(codec, reg,
1029 WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY,
1030 WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY);
1031
1032 /* Power up the DC servo */
1033 snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
1034 dcs_mask, dcs_mask);
1035
1036 /* Either calibrate the DC servo or restore cached state
1037 * if we have that.
1038 */
1039 if (wm8904->dcs_state[dcs_l] || wm8904->dcs_state[dcs_r]) {
1040 dev_dbg(codec->dev, "Restoring DC servo state\n");
1041
1042 snd_soc_write(codec, dcs_l_reg,
1043 wm8904->dcs_state[dcs_l]);
1044 snd_soc_write(codec, dcs_r_reg,
1045 wm8904->dcs_state[dcs_r]);
1046
1047 snd_soc_write(codec, WM8904_DC_SERVO_1, dcs_mask);
1048
1049 timeout = 20;
1050 } else {
1051 dev_dbg(codec->dev, "Calibrating DC servo\n");
1052
1053 snd_soc_write(codec, WM8904_DC_SERVO_1,
1054 dcs_mask << WM8904_DCS_TRIG_STARTUP_0_SHIFT);
1055
1056 timeout = 500;
1057 }
1058
1059 /* Wait for DC servo to complete */
1060 dcs_mask <<= WM8904_DCS_CAL_COMPLETE_SHIFT;
1061 do {
1062 val = snd_soc_read(codec, WM8904_DC_SERVO_READBACK_0);
1063 if ((val & dcs_mask) == dcs_mask)
1064 break;
1065
1066 msleep(1);
1067 } while (--timeout);
1068
1069 if ((val & dcs_mask) != dcs_mask)
1070 dev_warn(codec->dev, "DC servo timed out\n");
1071 else
1072 dev_dbg(codec->dev, "DC servo ready\n");
1073
1074 /* Enable the output stage */
1075 snd_soc_update_bits(codec, reg,
1076 WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
1077 WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP);
1078 break;
1079
1080 case SND_SOC_DAPM_POST_PMU:
1081 /* Unshort the output itself */
1082 snd_soc_update_bits(codec, reg,
1083 WM8904_HPL_RMV_SHORT |
1084 WM8904_HPR_RMV_SHORT,
1085 WM8904_HPL_RMV_SHORT |
1086 WM8904_HPR_RMV_SHORT);
1087
1088 break;
1089
1090 case SND_SOC_DAPM_PRE_PMD:
1091 /* Short the output */
1092 snd_soc_update_bits(codec, reg,
1093 WM8904_HPL_RMV_SHORT |
1094 WM8904_HPR_RMV_SHORT, 0);
1095 break;
1096
1097 case SND_SOC_DAPM_POST_PMD:
1098 /* Cache the DC servo configuration; this will be
1099 * invalidated if we change the configuration. */
1100 wm8904->dcs_state[dcs_l] = snd_soc_read(codec, dcs_l_reg);
1101 wm8904->dcs_state[dcs_r] = snd_soc_read(codec, dcs_r_reg);
1102
1103 snd_soc_update_bits(codec, WM8904_DC_SERVO_0,
1104 dcs_mask, 0);
1105
1106 /* Disable the amplifier input and output stages */
1107 snd_soc_update_bits(codec, reg,
1108 WM8904_HPL_ENA | WM8904_HPR_ENA |
1109 WM8904_HPL_ENA_DLY | WM8904_HPR_ENA_DLY |
1110 WM8904_HPL_ENA_OUTP | WM8904_HPR_ENA_OUTP,
1111 0);
1112
1113 /* PGAs too */
1114 snd_soc_update_bits(codec, pwr_reg,
1115 WM8904_HPL_PGA_ENA | WM8904_HPR_PGA_ENA,
1116 0);
1117 break;
1118 }
1119
1120 return 0;
1121 }
1122
1123 static const char *lin_text[] = {
1124 "IN1L", "IN2L", "IN3L"
1125 };
1126
1127 static const struct soc_enum lin_enum =
1128 SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 2, 3, lin_text);
1129
1130 static const struct snd_kcontrol_new lin_mux =
1131 SOC_DAPM_ENUM("Left Capture Mux", lin_enum);
1132
1133 static const struct soc_enum lin_inv_enum =
1134 SOC_ENUM_SINGLE(WM8904_ANALOGUE_LEFT_INPUT_1, 4, 3, lin_text);
1135
1136 static const struct snd_kcontrol_new lin_inv_mux =
1137 SOC_DAPM_ENUM("Left Capture Inveting Mux", lin_inv_enum);
1138
1139 static const char *rin_text[] = {
1140 "IN1R", "IN2R", "IN3R"
1141 };
1142
1143 static const struct soc_enum rin_enum =
1144 SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 2, 3, rin_text);
1145
1146 static const struct snd_kcontrol_new rin_mux =
1147 SOC_DAPM_ENUM("Right Capture Mux", rin_enum);
1148
1149 static const struct soc_enum rin_inv_enum =
1150 SOC_ENUM_SINGLE(WM8904_ANALOGUE_RIGHT_INPUT_1, 4, 3, rin_text);
1151
1152 static const struct snd_kcontrol_new rin_inv_mux =
1153 SOC_DAPM_ENUM("Right Capture Inveting Mux", rin_inv_enum);
1154
1155 static const char *aif_text[] = {
1156 "Left", "Right"
1157 };
1158
1159 static const struct soc_enum aifoutl_enum =
1160 SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 7, 2, aif_text);
1161
1162 static const struct snd_kcontrol_new aifoutl_mux =
1163 SOC_DAPM_ENUM("AIFOUTL Mux", aifoutl_enum);
1164
1165 static const struct soc_enum aifoutr_enum =
1166 SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 6, 2, aif_text);
1167
1168 static const struct snd_kcontrol_new aifoutr_mux =
1169 SOC_DAPM_ENUM("AIFOUTR Mux", aifoutr_enum);
1170
1171 static const struct soc_enum aifinl_enum =
1172 SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 5, 2, aif_text);
1173
1174 static const struct snd_kcontrol_new aifinl_mux =
1175 SOC_DAPM_ENUM("AIFINL Mux", aifinl_enum);
1176
1177 static const struct soc_enum aifinr_enum =
1178 SOC_ENUM_SINGLE(WM8904_AUDIO_INTERFACE_0, 4, 2, aif_text);
1179
1180 static const struct snd_kcontrol_new aifinr_mux =
1181 SOC_DAPM_ENUM("AIFINR Mux", aifinr_enum);
1182
1183 static const struct snd_soc_dapm_widget wm8904_core_dapm_widgets[] = {
1184 SND_SOC_DAPM_SUPPLY("SYSCLK", WM8904_CLOCK_RATES_2, 2, 0, sysclk_event,
1185 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMD),
1186 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8904_CLOCK_RATES_2, 1, 0, NULL, 0),
1187 SND_SOC_DAPM_SUPPLY("TOCLK", WM8904_CLOCK_RATES_2, 0, 0, NULL, 0),
1188 };
1189
1190 static const struct snd_soc_dapm_widget wm8904_adc_dapm_widgets[] = {
1191 SND_SOC_DAPM_INPUT("IN1L"),
1192 SND_SOC_DAPM_INPUT("IN1R"),
1193 SND_SOC_DAPM_INPUT("IN2L"),
1194 SND_SOC_DAPM_INPUT("IN2R"),
1195 SND_SOC_DAPM_INPUT("IN3L"),
1196 SND_SOC_DAPM_INPUT("IN3R"),
1197
1198 SND_SOC_DAPM_SUPPLY("MICBIAS", WM8904_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0),
1199
1200 SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lin_mux),
1201 SND_SOC_DAPM_MUX("Left Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
1202 &lin_inv_mux),
1203 SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rin_mux),
1204 SND_SOC_DAPM_MUX("Right Capture Inverting Mux", SND_SOC_NOPM, 0, 0,
1205 &rin_inv_mux),
1206
1207 SND_SOC_DAPM_PGA("Left Capture PGA", WM8904_POWER_MANAGEMENT_0, 1, 0,
1208 NULL, 0),
1209 SND_SOC_DAPM_PGA("Right Capture PGA", WM8904_POWER_MANAGEMENT_0, 0, 0,
1210 NULL, 0),
1211
1212 SND_SOC_DAPM_ADC("ADCL", NULL, WM8904_POWER_MANAGEMENT_6, 1, 0),
1213 SND_SOC_DAPM_ADC("ADCR", NULL, WM8904_POWER_MANAGEMENT_6, 0, 0),
1214
1215 SND_SOC_DAPM_MUX("AIFOUTL Mux", SND_SOC_NOPM, 0, 0, &aifoutl_mux),
1216 SND_SOC_DAPM_MUX("AIFOUTR Mux", SND_SOC_NOPM, 0, 0, &aifoutr_mux),
1217
1218 SND_SOC_DAPM_AIF_OUT("AIFOUTL", "Capture", 0, SND_SOC_NOPM, 0, 0),
1219 SND_SOC_DAPM_AIF_OUT("AIFOUTR", "Capture", 1, SND_SOC_NOPM, 0, 0),
1220 };
1221
1222 static const struct snd_soc_dapm_widget wm8904_dac_dapm_widgets[] = {
1223 SND_SOC_DAPM_AIF_IN("AIFINL", "Playback", 0, SND_SOC_NOPM, 0, 0),
1224 SND_SOC_DAPM_AIF_IN("AIFINR", "Playback", 1, SND_SOC_NOPM, 0, 0),
1225
1226 SND_SOC_DAPM_MUX("DACL Mux", SND_SOC_NOPM, 0, 0, &aifinl_mux),
1227 SND_SOC_DAPM_MUX("DACR Mux", SND_SOC_NOPM, 0, 0, &aifinr_mux),
1228
1229 SND_SOC_DAPM_DAC("DACL", NULL, WM8904_POWER_MANAGEMENT_6, 3, 0),
1230 SND_SOC_DAPM_DAC("DACR", NULL, WM8904_POWER_MANAGEMENT_6, 2, 0),
1231
1232 SND_SOC_DAPM_SUPPLY("Charge pump", WM8904_CHARGE_PUMP_0, 0, 0, cp_event,
1233 SND_SOC_DAPM_POST_PMU),
1234
1235 SND_SOC_DAPM_PGA("HPL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
1236 SND_SOC_DAPM_PGA("HPR PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
1237
1238 SND_SOC_DAPM_PGA("LINEL PGA", SND_SOC_NOPM, 1, 0, NULL, 0),
1239 SND_SOC_DAPM_PGA("LINER PGA", SND_SOC_NOPM, 0, 0, NULL, 0),
1240
1241 SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM, WM8904_ANALOGUE_HP_0,
1242 0, NULL, 0, out_pga_event,
1243 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
1244 SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
1245 SND_SOC_DAPM_PGA_E("Line Output", SND_SOC_NOPM, WM8904_ANALOGUE_LINEOUT_0,
1246 0, NULL, 0, out_pga_event,
1247 SND_SOC_DAPM_PRE_PMU | SND_SOC_DAPM_POST_PMU |
1248 SND_SOC_DAPM_PRE_PMD | SND_SOC_DAPM_POST_PMD),
1249
1250 SND_SOC_DAPM_OUTPUT("HPOUTL"),
1251 SND_SOC_DAPM_OUTPUT("HPOUTR"),
1252 SND_SOC_DAPM_OUTPUT("LINEOUTL"),
1253 SND_SOC_DAPM_OUTPUT("LINEOUTR"),
1254 };
1255
1256 static const char *out_mux_text[] = {
1257 "DAC", "Bypass"
1258 };
1259
1260 static const struct soc_enum hpl_enum =
1261 SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 3, 2, out_mux_text);
1262
1263 static const struct snd_kcontrol_new hpl_mux =
1264 SOC_DAPM_ENUM("HPL Mux", hpl_enum);
1265
1266 static const struct soc_enum hpr_enum =
1267 SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 2, 2, out_mux_text);
1268
1269 static const struct snd_kcontrol_new hpr_mux =
1270 SOC_DAPM_ENUM("HPR Mux", hpr_enum);
1271
1272 static const struct soc_enum linel_enum =
1273 SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 1, 2, out_mux_text);
1274
1275 static const struct snd_kcontrol_new linel_mux =
1276 SOC_DAPM_ENUM("LINEL Mux", linel_enum);
1277
1278 static const struct soc_enum liner_enum =
1279 SOC_ENUM_SINGLE(WM8904_ANALOGUE_OUT12_ZC, 0, 2, out_mux_text);
1280
1281 static const struct snd_kcontrol_new liner_mux =
1282 SOC_DAPM_ENUM("LINEL Mux", liner_enum);
1283
1284 static const char *sidetone_text[] = {
1285 "None", "Left", "Right"
1286 };
1287
1288 static const struct soc_enum dacl_sidetone_enum =
1289 SOC_ENUM_SINGLE(WM8904_DAC_DIGITAL_0, 2, 3, sidetone_text);
1290
1291 static const struct snd_kcontrol_new dacl_sidetone_mux =
1292 SOC_DAPM_ENUM("Left Sidetone Mux", dacl_sidetone_enum);
1293
1294 static const struct soc_enum dacr_sidetone_enum =
1295 SOC_ENUM_SINGLE(WM8904_DAC_DIGITAL_0, 0, 3, sidetone_text);
1296
1297 static const struct snd_kcontrol_new dacr_sidetone_mux =
1298 SOC_DAPM_ENUM("Right Sidetone Mux", dacr_sidetone_enum);
1299
1300 static const struct snd_soc_dapm_widget wm8904_dapm_widgets[] = {
1301 SND_SOC_DAPM_SUPPLY("Class G", WM8904_CLASS_W_0, 0, 1, NULL, 0),
1302 SND_SOC_DAPM_PGA("Left Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
1303 SND_SOC_DAPM_PGA("Right Bypass", SND_SOC_NOPM, 0, 0, NULL, 0),
1304
1305 SND_SOC_DAPM_MUX("Left Sidetone", SND_SOC_NOPM, 0, 0, &dacl_sidetone_mux),
1306 SND_SOC_DAPM_MUX("Right Sidetone", SND_SOC_NOPM, 0, 0, &dacr_sidetone_mux),
1307
1308 SND_SOC_DAPM_MUX("HPL Mux", SND_SOC_NOPM, 0, 0, &hpl_mux),
1309 SND_SOC_DAPM_MUX("HPR Mux", SND_SOC_NOPM, 0, 0, &hpr_mux),
1310 SND_SOC_DAPM_MUX("LINEL Mux", SND_SOC_NOPM, 0, 0, &linel_mux),
1311 SND_SOC_DAPM_MUX("LINER Mux", SND_SOC_NOPM, 0, 0, &liner_mux),
1312 };
1313
1314 static const struct snd_soc_dapm_route core_intercon[] = {
1315 { "CLK_DSP", NULL, "SYSCLK" },
1316 { "TOCLK", NULL, "SYSCLK" },
1317 };
1318
1319 static const struct snd_soc_dapm_route adc_intercon[] = {
1320 { "Left Capture Mux", "IN1L", "IN1L" },
1321 { "Left Capture Mux", "IN2L", "IN2L" },
1322 { "Left Capture Mux", "IN3L", "IN3L" },
1323
1324 { "Left Capture Inverting Mux", "IN1L", "IN1L" },
1325 { "Left Capture Inverting Mux", "IN2L", "IN2L" },
1326 { "Left Capture Inverting Mux", "IN3L", "IN3L" },
1327
1328 { "Right Capture Mux", "IN1R", "IN1R" },
1329 { "Right Capture Mux", "IN2R", "IN2R" },
1330 { "Right Capture Mux", "IN3R", "IN3R" },
1331
1332 { "Right Capture Inverting Mux", "IN1R", "IN1R" },
1333 { "Right Capture Inverting Mux", "IN2R", "IN2R" },
1334 { "Right Capture Inverting Mux", "IN3R", "IN3R" },
1335
1336 { "Left Capture PGA", NULL, "Left Capture Mux" },
1337 { "Left Capture PGA", NULL, "Left Capture Inverting Mux" },
1338
1339 { "Right Capture PGA", NULL, "Right Capture Mux" },
1340 { "Right Capture PGA", NULL, "Right Capture Inverting Mux" },
1341
1342 { "AIFOUTL", "Left", "ADCL" },
1343 { "AIFOUTL", "Right", "ADCR" },
1344 { "AIFOUTR", "Left", "ADCL" },
1345 { "AIFOUTR", "Right", "ADCR" },
1346
1347 { "ADCL", NULL, "CLK_DSP" },
1348 { "ADCL", NULL, "Left Capture PGA" },
1349
1350 { "ADCR", NULL, "CLK_DSP" },
1351 { "ADCR", NULL, "Right Capture PGA" },
1352 };
1353
1354 static const struct snd_soc_dapm_route dac_intercon[] = {
1355 { "DACL", "Right", "AIFINR" },
1356 { "DACL", "Left", "AIFINL" },
1357 { "DACL", NULL, "CLK_DSP" },
1358
1359 { "DACR", "Right", "AIFINR" },
1360 { "DACR", "Left", "AIFINL" },
1361 { "DACR", NULL, "CLK_DSP" },
1362
1363 { "Charge pump", NULL, "SYSCLK" },
1364
1365 { "Headphone Output", NULL, "HPL PGA" },
1366 { "Headphone Output", NULL, "HPR PGA" },
1367 { "Headphone Output", NULL, "Charge pump" },
1368 { "Headphone Output", NULL, "TOCLK" },
1369
1370 { "Line Output", NULL, "LINEL PGA" },
1371 { "Line Output", NULL, "LINER PGA" },
1372 { "Line Output", NULL, "Charge pump" },
1373 { "Line Output", NULL, "TOCLK" },
1374
1375 { "HPOUTL", NULL, "Headphone Output" },
1376 { "HPOUTR", NULL, "Headphone Output" },
1377
1378 { "LINEOUTL", NULL, "Line Output" },
1379 { "LINEOUTR", NULL, "Line Output" },
1380 };
1381
1382 static const struct snd_soc_dapm_route wm8904_intercon[] = {
1383 { "Left Sidetone", "Left", "ADCL" },
1384 { "Left Sidetone", "Right", "ADCR" },
1385 { "DACL", NULL, "Left Sidetone" },
1386
1387 { "Right Sidetone", "Left", "ADCL" },
1388 { "Right Sidetone", "Right", "ADCR" },
1389 { "DACR", NULL, "Right Sidetone" },
1390
1391 { "Left Bypass", NULL, "Class G" },
1392 { "Left Bypass", NULL, "Left Capture PGA" },
1393
1394 { "Right Bypass", NULL, "Class G" },
1395 { "Right Bypass", NULL, "Right Capture PGA" },
1396
1397 { "HPL Mux", "DAC", "DACL" },
1398 { "HPL Mux", "Bypass", "Left Bypass" },
1399
1400 { "HPR Mux", "DAC", "DACR" },
1401 { "HPR Mux", "Bypass", "Right Bypass" },
1402
1403 { "LINEL Mux", "DAC", "DACL" },
1404 { "LINEL Mux", "Bypass", "Left Bypass" },
1405
1406 { "LINER Mux", "DAC", "DACR" },
1407 { "LINER Mux", "Bypass", "Right Bypass" },
1408
1409 { "HPL PGA", NULL, "HPL Mux" },
1410 { "HPR PGA", NULL, "HPR Mux" },
1411
1412 { "LINEL PGA", NULL, "LINEL Mux" },
1413 { "LINER PGA", NULL, "LINER Mux" },
1414 };
1415
1416 static const struct snd_soc_dapm_route wm8912_intercon[] = {
1417 { "HPL PGA", NULL, "DACL" },
1418 { "HPR PGA", NULL, "DACR" },
1419
1420 { "LINEL PGA", NULL, "DACL" },
1421 { "LINER PGA", NULL, "DACR" },
1422 };
1423
1424 static int wm8904_add_widgets(struct snd_soc_codec *codec)
1425 {
1426 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
1427 struct snd_soc_dapm_context *dapm = &codec->dapm;
1428
1429 snd_soc_dapm_new_controls(dapm, wm8904_core_dapm_widgets,
1430 ARRAY_SIZE(wm8904_core_dapm_widgets));
1431 snd_soc_dapm_add_routes(dapm, core_intercon,
1432 ARRAY_SIZE(core_intercon));
1433
1434 switch (wm8904->devtype) {
1435 case WM8904:
1436 snd_soc_add_controls(codec, wm8904_adc_snd_controls,
1437 ARRAY_SIZE(wm8904_adc_snd_controls));
1438 snd_soc_add_controls(codec, wm8904_dac_snd_controls,
1439 ARRAY_SIZE(wm8904_dac_snd_controls));
1440 snd_soc_add_controls(codec, wm8904_snd_controls,
1441 ARRAY_SIZE(wm8904_snd_controls));
1442
1443 snd_soc_dapm_new_controls(dapm, wm8904_adc_dapm_widgets,
1444 ARRAY_SIZE(wm8904_adc_dapm_widgets));
1445 snd_soc_dapm_new_controls(dapm, wm8904_dac_dapm_widgets,
1446 ARRAY_SIZE(wm8904_dac_dapm_widgets));
1447 snd_soc_dapm_new_controls(dapm, wm8904_dapm_widgets,
1448 ARRAY_SIZE(wm8904_dapm_widgets));
1449
1450 snd_soc_dapm_add_routes(dapm, core_intercon,
1451 ARRAY_SIZE(core_intercon));
1452 snd_soc_dapm_add_routes(dapm, adc_intercon,
1453 ARRAY_SIZE(adc_intercon));
1454 snd_soc_dapm_add_routes(dapm, dac_intercon,
1455 ARRAY_SIZE(dac_intercon));
1456 snd_soc_dapm_add_routes(dapm, wm8904_intercon,
1457 ARRAY_SIZE(wm8904_intercon));
1458 break;
1459
1460 case WM8912:
1461 snd_soc_add_controls(codec, wm8904_dac_snd_controls,
1462 ARRAY_SIZE(wm8904_dac_snd_controls));
1463
1464 snd_soc_dapm_new_controls(dapm, wm8904_dac_dapm_widgets,
1465 ARRAY_SIZE(wm8904_dac_dapm_widgets));
1466
1467 snd_soc_dapm_add_routes(dapm, dac_intercon,
1468 ARRAY_SIZE(dac_intercon));
1469 snd_soc_dapm_add_routes(dapm, wm8912_intercon,
1470 ARRAY_SIZE(wm8912_intercon));
1471 break;
1472 }
1473
1474 snd_soc_dapm_new_widgets(dapm);
1475 return 0;
1476 }
1477
1478 static struct {
1479 int ratio;
1480 unsigned int clk_sys_rate;
1481 } clk_sys_rates[] = {
1482 { 64, 0 },
1483 { 128, 1 },
1484 { 192, 2 },
1485 { 256, 3 },
1486 { 384, 4 },
1487 { 512, 5 },
1488 { 786, 6 },
1489 { 1024, 7 },
1490 { 1408, 8 },
1491 { 1536, 9 },
1492 };
1493
1494 static struct {
1495 int rate;
1496 int sample_rate;
1497 } sample_rates[] = {
1498 { 8000, 0 },
1499 { 11025, 1 },
1500 { 12000, 1 },
1501 { 16000, 2 },
1502 { 22050, 3 },
1503 { 24000, 3 },
1504 { 32000, 4 },
1505 { 44100, 5 },
1506 { 48000, 5 },
1507 };
1508
1509 static struct {
1510 int div; /* *10 due to .5s */
1511 int bclk_div;
1512 } bclk_divs[] = {
1513 { 10, 0 },
1514 { 15, 1 },
1515 { 20, 2 },
1516 { 30, 3 },
1517 { 40, 4 },
1518 { 50, 5 },
1519 { 55, 6 },
1520 { 60, 7 },
1521 { 80, 8 },
1522 { 100, 9 },
1523 { 110, 10 },
1524 { 120, 11 },
1525 { 160, 12 },
1526 { 200, 13 },
1527 { 220, 14 },
1528 { 240, 16 },
1529 { 200, 17 },
1530 { 320, 18 },
1531 { 440, 19 },
1532 { 480, 20 },
1533 };
1534
1535
1536 static int wm8904_hw_params(struct snd_pcm_substream *substream,
1537 struct snd_pcm_hw_params *params,
1538 struct snd_soc_dai *dai)
1539 {
1540 struct snd_soc_codec *codec = dai->codec;
1541 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
1542 int ret, i, best, best_val, cur_val;
1543 unsigned int aif1 = 0;
1544 unsigned int aif2 = 0;
1545 unsigned int aif3 = 0;
1546 unsigned int clock1 = 0;
1547 unsigned int dac_digital1 = 0;
1548
1549 /* What BCLK do we need? */
1550 wm8904->fs = params_rate(params);
1551 if (wm8904->tdm_slots) {
1552 dev_dbg(codec->dev, "Configuring for %d %d bit TDM slots\n",
1553 wm8904->tdm_slots, wm8904->tdm_width);
1554 wm8904->bclk = snd_soc_calc_bclk(wm8904->fs,
1555 wm8904->tdm_width, 2,
1556 wm8904->tdm_slots);
1557 } else {
1558 wm8904->bclk = snd_soc_params_to_bclk(params);
1559 }
1560
1561 switch (params_format(params)) {
1562 case SNDRV_PCM_FORMAT_S16_LE:
1563 break;
1564 case SNDRV_PCM_FORMAT_S20_3LE:
1565 aif1 |= 0x40;
1566 break;
1567 case SNDRV_PCM_FORMAT_S24_LE:
1568 aif1 |= 0x80;
1569 break;
1570 case SNDRV_PCM_FORMAT_S32_LE:
1571 aif1 |= 0xc0;
1572 break;
1573 default:
1574 return -EINVAL;
1575 }
1576
1577
1578 dev_dbg(codec->dev, "Target BCLK is %dHz\n", wm8904->bclk);
1579
1580 ret = wm8904_configure_clocking(codec);
1581 if (ret != 0)
1582 return ret;
1583
1584 /* Select nearest CLK_SYS_RATE */
1585 best = 0;
1586 best_val = abs((wm8904->sysclk_rate / clk_sys_rates[0].ratio)
1587 - wm8904->fs);
1588 for (i = 1; i < ARRAY_SIZE(clk_sys_rates); i++) {
1589 cur_val = abs((wm8904->sysclk_rate /
1590 clk_sys_rates[i].ratio) - wm8904->fs);
1591 if (cur_val < best_val) {
1592 best = i;
1593 best_val = cur_val;
1594 }
1595 }
1596 dev_dbg(codec->dev, "Selected CLK_SYS_RATIO of %d\n",
1597 clk_sys_rates[best].ratio);
1598 clock1 |= (clk_sys_rates[best].clk_sys_rate
1599 << WM8904_CLK_SYS_RATE_SHIFT);
1600
1601 /* SAMPLE_RATE */
1602 best = 0;
1603 best_val = abs(wm8904->fs - sample_rates[0].rate);
1604 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1605 /* Closest match */
1606 cur_val = abs(wm8904->fs - sample_rates[i].rate);
1607 if (cur_val < best_val) {
1608 best = i;
1609 best_val = cur_val;
1610 }
1611 }
1612 dev_dbg(codec->dev, "Selected SAMPLE_RATE of %dHz\n",
1613 sample_rates[best].rate);
1614 clock1 |= (sample_rates[best].sample_rate
1615 << WM8904_SAMPLE_RATE_SHIFT);
1616
1617 /* Enable sloping stopband filter for low sample rates */
1618 if (wm8904->fs <= 24000)
1619 dac_digital1 |= WM8904_DAC_SB_FILT;
1620
1621 /* BCLK_DIV */
1622 best = 0;
1623 best_val = INT_MAX;
1624 for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) {
1625 cur_val = ((wm8904->sysclk_rate * 10) / bclk_divs[i].div)
1626 - wm8904->bclk;
1627 if (cur_val < 0) /* Table is sorted */
1628 break;
1629 if (cur_val < best_val) {
1630 best = i;
1631 best_val = cur_val;
1632 }
1633 }
1634 wm8904->bclk = (wm8904->sysclk_rate * 10) / bclk_divs[best].div;
1635 dev_dbg(codec->dev, "Selected BCLK_DIV of %d for %dHz BCLK\n",
1636 bclk_divs[best].div, wm8904->bclk);
1637 aif2 |= bclk_divs[best].bclk_div;
1638
1639 /* LRCLK is a simple fraction of BCLK */
1640 dev_dbg(codec->dev, "LRCLK_RATE is %d\n", wm8904->bclk / wm8904->fs);
1641 aif3 |= wm8904->bclk / wm8904->fs;
1642
1643 /* Apply the settings */
1644 snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1,
1645 WM8904_DAC_SB_FILT, dac_digital1);
1646 snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
1647 WM8904_AIF_WL_MASK, aif1);
1648 snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_2,
1649 WM8904_BCLK_DIV_MASK, aif2);
1650 snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
1651 WM8904_LRCLK_RATE_MASK, aif3);
1652 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_1,
1653 WM8904_SAMPLE_RATE_MASK |
1654 WM8904_CLK_SYS_RATE_MASK, clock1);
1655
1656 /* Update filters for the new settings */
1657 wm8904_set_retune_mobile(codec);
1658 wm8904_set_deemph(codec);
1659
1660 return 0;
1661 }
1662
1663
1664 static int wm8904_set_sysclk(struct snd_soc_dai *dai, int clk_id,
1665 unsigned int freq, int dir)
1666 {
1667 struct snd_soc_codec *codec = dai->codec;
1668 struct wm8904_priv *priv = snd_soc_codec_get_drvdata(codec);
1669
1670 switch (clk_id) {
1671 case WM8904_CLK_MCLK:
1672 priv->sysclk_src = clk_id;
1673 priv->mclk_rate = freq;
1674 break;
1675
1676 case WM8904_CLK_FLL:
1677 priv->sysclk_src = clk_id;
1678 break;
1679
1680 default:
1681 return -EINVAL;
1682 }
1683
1684 dev_dbg(dai->dev, "Clock source is %d at %uHz\n", clk_id, freq);
1685
1686 wm8904_configure_clocking(codec);
1687
1688 return 0;
1689 }
1690
1691 static int wm8904_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
1692 {
1693 struct snd_soc_codec *codec = dai->codec;
1694 unsigned int aif1 = 0;
1695 unsigned int aif3 = 0;
1696
1697 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1698 case SND_SOC_DAIFMT_CBS_CFS:
1699 break;
1700 case SND_SOC_DAIFMT_CBS_CFM:
1701 aif3 |= WM8904_LRCLK_DIR;
1702 break;
1703 case SND_SOC_DAIFMT_CBM_CFS:
1704 aif1 |= WM8904_BCLK_DIR;
1705 break;
1706 case SND_SOC_DAIFMT_CBM_CFM:
1707 aif1 |= WM8904_BCLK_DIR;
1708 aif3 |= WM8904_LRCLK_DIR;
1709 break;
1710 default:
1711 return -EINVAL;
1712 }
1713
1714 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1715 case SND_SOC_DAIFMT_DSP_B:
1716 aif1 |= WM8904_AIF_LRCLK_INV;
1717 case SND_SOC_DAIFMT_DSP_A:
1718 aif1 |= 0x3;
1719 break;
1720 case SND_SOC_DAIFMT_I2S:
1721 aif1 |= 0x2;
1722 break;
1723 case SND_SOC_DAIFMT_RIGHT_J:
1724 break;
1725 case SND_SOC_DAIFMT_LEFT_J:
1726 aif1 |= 0x1;
1727 break;
1728 default:
1729 return -EINVAL;
1730 }
1731
1732 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1733 case SND_SOC_DAIFMT_DSP_A:
1734 case SND_SOC_DAIFMT_DSP_B:
1735 /* frame inversion not valid for DSP modes */
1736 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1737 case SND_SOC_DAIFMT_NB_NF:
1738 break;
1739 case SND_SOC_DAIFMT_IB_NF:
1740 aif1 |= WM8904_AIF_BCLK_INV;
1741 break;
1742 default:
1743 return -EINVAL;
1744 }
1745 break;
1746
1747 case SND_SOC_DAIFMT_I2S:
1748 case SND_SOC_DAIFMT_RIGHT_J:
1749 case SND_SOC_DAIFMT_LEFT_J:
1750 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1751 case SND_SOC_DAIFMT_NB_NF:
1752 break;
1753 case SND_SOC_DAIFMT_IB_IF:
1754 aif1 |= WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV;
1755 break;
1756 case SND_SOC_DAIFMT_IB_NF:
1757 aif1 |= WM8904_AIF_BCLK_INV;
1758 break;
1759 case SND_SOC_DAIFMT_NB_IF:
1760 aif1 |= WM8904_AIF_LRCLK_INV;
1761 break;
1762 default:
1763 return -EINVAL;
1764 }
1765 break;
1766 default:
1767 return -EINVAL;
1768 }
1769
1770 snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
1771 WM8904_AIF_BCLK_INV | WM8904_AIF_LRCLK_INV |
1772 WM8904_AIF_FMT_MASK | WM8904_BCLK_DIR, aif1);
1773 snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_3,
1774 WM8904_LRCLK_DIR, aif3);
1775
1776 return 0;
1777 }
1778
1779
1780 static int wm8904_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
1781 unsigned int rx_mask, int slots, int slot_width)
1782 {
1783 struct snd_soc_codec *codec = dai->codec;
1784 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
1785 int aif1 = 0;
1786
1787 /* Don't need to validate anything if we're turning off TDM */
1788 if (slots == 0)
1789 goto out;
1790
1791 /* Note that we allow configurations we can't handle ourselves -
1792 * for example, we can generate clocks for slots 2 and up even if
1793 * we can't use those slots ourselves.
1794 */
1795 aif1 |= WM8904_AIFADC_TDM | WM8904_AIFDAC_TDM;
1796
1797 switch (rx_mask) {
1798 case 3:
1799 break;
1800 case 0xc:
1801 aif1 |= WM8904_AIFADC_TDM_CHAN;
1802 break;
1803 default:
1804 return -EINVAL;
1805 }
1806
1807
1808 switch (tx_mask) {
1809 case 3:
1810 break;
1811 case 0xc:
1812 aif1 |= WM8904_AIFDAC_TDM_CHAN;
1813 break;
1814 default:
1815 return -EINVAL;
1816 }
1817
1818 out:
1819 wm8904->tdm_width = slot_width;
1820 wm8904->tdm_slots = slots / 2;
1821
1822 snd_soc_update_bits(codec, WM8904_AUDIO_INTERFACE_1,
1823 WM8904_AIFADC_TDM | WM8904_AIFADC_TDM_CHAN |
1824 WM8904_AIFDAC_TDM | WM8904_AIFDAC_TDM_CHAN, aif1);
1825
1826 return 0;
1827 }
1828
1829 struct _fll_div {
1830 u16 fll_fratio;
1831 u16 fll_outdiv;
1832 u16 fll_clk_ref_div;
1833 u16 n;
1834 u16 k;
1835 };
1836
1837 /* The size in bits of the FLL divide multiplied by 10
1838 * to allow rounding later */
1839 #define FIXED_FLL_SIZE ((1 << 16) * 10)
1840
1841 static struct {
1842 unsigned int min;
1843 unsigned int max;
1844 u16 fll_fratio;
1845 int ratio;
1846 } fll_fratios[] = {
1847 { 0, 64000, 4, 16 },
1848 { 64000, 128000, 3, 8 },
1849 { 128000, 256000, 2, 4 },
1850 { 256000, 1000000, 1, 2 },
1851 { 1000000, 13500000, 0, 1 },
1852 };
1853
1854 static int fll_factors(struct _fll_div *fll_div, unsigned int Fref,
1855 unsigned int Fout)
1856 {
1857 u64 Kpart;
1858 unsigned int K, Ndiv, Nmod, target;
1859 unsigned int div;
1860 int i;
1861
1862 /* Fref must be <=13.5MHz */
1863 div = 1;
1864 fll_div->fll_clk_ref_div = 0;
1865 while ((Fref / div) > 13500000) {
1866 div *= 2;
1867 fll_div->fll_clk_ref_div++;
1868
1869 if (div > 8) {
1870 pr_err("Can't scale %dMHz input down to <=13.5MHz\n",
1871 Fref);
1872 return -EINVAL;
1873 }
1874 }
1875
1876 pr_debug("Fref=%u Fout=%u\n", Fref, Fout);
1877
1878 /* Apply the division for our remaining calculations */
1879 Fref /= div;
1880
1881 /* Fvco should be 90-100MHz; don't check the upper bound */
1882 div = 4;
1883 while (Fout * div < 90000000) {
1884 div++;
1885 if (div > 64) {
1886 pr_err("Unable to find FLL_OUTDIV for Fout=%uHz\n",
1887 Fout);
1888 return -EINVAL;
1889 }
1890 }
1891 target = Fout * div;
1892 fll_div->fll_outdiv = div - 1;
1893
1894 pr_debug("Fvco=%dHz\n", target);
1895
1896 /* Find an appropriate FLL_FRATIO and factor it out of the target */
1897 for (i = 0; i < ARRAY_SIZE(fll_fratios); i++) {
1898 if (fll_fratios[i].min <= Fref && Fref <= fll_fratios[i].max) {
1899 fll_div->fll_fratio = fll_fratios[i].fll_fratio;
1900 target /= fll_fratios[i].ratio;
1901 break;
1902 }
1903 }
1904 if (i == ARRAY_SIZE(fll_fratios)) {
1905 pr_err("Unable to find FLL_FRATIO for Fref=%uHz\n", Fref);
1906 return -EINVAL;
1907 }
1908
1909 /* Now, calculate N.K */
1910 Ndiv = target / Fref;
1911
1912 fll_div->n = Ndiv;
1913 Nmod = target % Fref;
1914 pr_debug("Nmod=%d\n", Nmod);
1915
1916 /* Calculate fractional part - scale up so we can round. */
1917 Kpart = FIXED_FLL_SIZE * (long long)Nmod;
1918
1919 do_div(Kpart, Fref);
1920
1921 K = Kpart & 0xFFFFFFFF;
1922
1923 if ((K % 10) >= 5)
1924 K += 5;
1925
1926 /* Move down to proper range now rounding is done */
1927 fll_div->k = K / 10;
1928
1929 pr_debug("N=%x K=%x FLL_FRATIO=%x FLL_OUTDIV=%x FLL_CLK_REF_DIV=%x\n",
1930 fll_div->n, fll_div->k,
1931 fll_div->fll_fratio, fll_div->fll_outdiv,
1932 fll_div->fll_clk_ref_div);
1933
1934 return 0;
1935 }
1936
1937 static int wm8904_set_fll(struct snd_soc_dai *dai, int fll_id, int source,
1938 unsigned int Fref, unsigned int Fout)
1939 {
1940 struct snd_soc_codec *codec = dai->codec;
1941 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
1942 struct _fll_div fll_div;
1943 int ret, val;
1944 int clock2, fll1;
1945
1946 /* Any change? */
1947 if (source == wm8904->fll_src && Fref == wm8904->fll_fref &&
1948 Fout == wm8904->fll_fout)
1949 return 0;
1950
1951 clock2 = snd_soc_read(codec, WM8904_CLOCK_RATES_2);
1952
1953 if (Fout == 0) {
1954 dev_dbg(codec->dev, "FLL disabled\n");
1955
1956 wm8904->fll_fref = 0;
1957 wm8904->fll_fout = 0;
1958
1959 /* Gate SYSCLK to avoid glitches */
1960 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
1961 WM8904_CLK_SYS_ENA, 0);
1962
1963 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
1964 WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
1965
1966 goto out;
1967 }
1968
1969 /* Validate the FLL ID */
1970 switch (source) {
1971 case WM8904_FLL_MCLK:
1972 case WM8904_FLL_LRCLK:
1973 case WM8904_FLL_BCLK:
1974 ret = fll_factors(&fll_div, Fref, Fout);
1975 if (ret != 0)
1976 return ret;
1977 break;
1978
1979 case WM8904_FLL_FREE_RUNNING:
1980 dev_dbg(codec->dev, "Using free running FLL\n");
1981 /* Force 12MHz and output/4 for now */
1982 Fout = 12000000;
1983 Fref = 12000000;
1984
1985 memset(&fll_div, 0, sizeof(fll_div));
1986 fll_div.fll_outdiv = 3;
1987 break;
1988
1989 default:
1990 dev_err(codec->dev, "Unknown FLL ID %d\n", fll_id);
1991 return -EINVAL;
1992 }
1993
1994 /* Save current state then disable the FLL and SYSCLK to avoid
1995 * misclocking */
1996 fll1 = snd_soc_read(codec, WM8904_FLL_CONTROL_1);
1997 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
1998 WM8904_CLK_SYS_ENA, 0);
1999 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
2000 WM8904_FLL_OSC_ENA | WM8904_FLL_ENA, 0);
2001
2002 /* Unlock forced oscilator control to switch it on/off */
2003 snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
2004 WM8904_USER_KEY, WM8904_USER_KEY);
2005
2006 if (fll_id == WM8904_FLL_FREE_RUNNING) {
2007 val = WM8904_FLL_FRC_NCO;
2008 } else {
2009 val = 0;
2010 }
2011
2012 snd_soc_update_bits(codec, WM8904_FLL_NCO_TEST_1, WM8904_FLL_FRC_NCO,
2013 val);
2014 snd_soc_update_bits(codec, WM8904_CONTROL_INTERFACE_TEST_1,
2015 WM8904_USER_KEY, 0);
2016
2017 switch (fll_id) {
2018 case WM8904_FLL_MCLK:
2019 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
2020 WM8904_FLL_CLK_REF_SRC_MASK, 0);
2021 break;
2022
2023 case WM8904_FLL_LRCLK:
2024 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
2025 WM8904_FLL_CLK_REF_SRC_MASK, 1);
2026 break;
2027
2028 case WM8904_FLL_BCLK:
2029 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
2030 WM8904_FLL_CLK_REF_SRC_MASK, 2);
2031 break;
2032 }
2033
2034 if (fll_div.k)
2035 val = WM8904_FLL_FRACN_ENA;
2036 else
2037 val = 0;
2038 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
2039 WM8904_FLL_FRACN_ENA, val);
2040
2041 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_2,
2042 WM8904_FLL_OUTDIV_MASK | WM8904_FLL_FRATIO_MASK,
2043 (fll_div.fll_outdiv << WM8904_FLL_OUTDIV_SHIFT) |
2044 (fll_div.fll_fratio << WM8904_FLL_FRATIO_SHIFT));
2045
2046 snd_soc_write(codec, WM8904_FLL_CONTROL_3, fll_div.k);
2047
2048 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_4, WM8904_FLL_N_MASK,
2049 fll_div.n << WM8904_FLL_N_SHIFT);
2050
2051 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_5,
2052 WM8904_FLL_CLK_REF_DIV_MASK,
2053 fll_div.fll_clk_ref_div
2054 << WM8904_FLL_CLK_REF_DIV_SHIFT);
2055
2056 dev_dbg(codec->dev, "FLL configured for %dHz->%dHz\n", Fref, Fout);
2057
2058 wm8904->fll_fref = Fref;
2059 wm8904->fll_fout = Fout;
2060 wm8904->fll_src = source;
2061
2062 /* Enable the FLL if it was previously active */
2063 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
2064 WM8904_FLL_OSC_ENA, fll1);
2065 snd_soc_update_bits(codec, WM8904_FLL_CONTROL_1,
2066 WM8904_FLL_ENA, fll1);
2067
2068 out:
2069 /* Reenable SYSCLK if it was previously active */
2070 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_2,
2071 WM8904_CLK_SYS_ENA, clock2);
2072
2073 return 0;
2074 }
2075
2076 static int wm8904_digital_mute(struct snd_soc_dai *codec_dai, int mute)
2077 {
2078 struct snd_soc_codec *codec = codec_dai->codec;
2079 int val;
2080
2081 if (mute)
2082 val = WM8904_DAC_MUTE;
2083 else
2084 val = 0;
2085
2086 snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_1, WM8904_DAC_MUTE, val);
2087
2088 return 0;
2089 }
2090
2091 static void wm8904_sync_cache(struct snd_soc_codec *codec)
2092 {
2093 u16 *reg_cache = codec->reg_cache;
2094 int i;
2095
2096 if (!codec->cache_sync)
2097 return;
2098
2099 codec->cache_only = 0;
2100
2101 /* Sync back cached values if they're different from the
2102 * hardware default.
2103 */
2104 for (i = 1; i < codec->driver->reg_cache_size; i++) {
2105 if (!wm8904_access[i].writable)
2106 continue;
2107
2108 if (reg_cache[i] == wm8904_reg[i])
2109 continue;
2110
2111 snd_soc_write(codec, i, reg_cache[i]);
2112 }
2113
2114 codec->cache_sync = 0;
2115 }
2116
2117 static int wm8904_set_bias_level(struct snd_soc_codec *codec,
2118 enum snd_soc_bias_level level)
2119 {
2120 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
2121 int ret;
2122
2123 switch (level) {
2124 case SND_SOC_BIAS_ON:
2125 break;
2126
2127 case SND_SOC_BIAS_PREPARE:
2128 /* VMID resistance 2*50k */
2129 snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
2130 WM8904_VMID_RES_MASK,
2131 0x1 << WM8904_VMID_RES_SHIFT);
2132
2133 /* Normal bias current */
2134 snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
2135 WM8904_ISEL_MASK, 2 << WM8904_ISEL_SHIFT);
2136 break;
2137
2138 case SND_SOC_BIAS_STANDBY:
2139 if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
2140 ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
2141 wm8904->supplies);
2142 if (ret != 0) {
2143 dev_err(codec->dev,
2144 "Failed to enable supplies: %d\n",
2145 ret);
2146 return ret;
2147 }
2148
2149 wm8904_sync_cache(codec);
2150
2151 /* Enable bias */
2152 snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
2153 WM8904_BIAS_ENA, WM8904_BIAS_ENA);
2154
2155 /* Enable VMID, VMID buffering, 2*5k resistance */
2156 snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
2157 WM8904_VMID_ENA |
2158 WM8904_VMID_RES_MASK,
2159 WM8904_VMID_ENA |
2160 0x3 << WM8904_VMID_RES_SHIFT);
2161
2162 /* Let VMID ramp */
2163 msleep(1);
2164 }
2165
2166 /* Maintain VMID with 2*250k */
2167 snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
2168 WM8904_VMID_RES_MASK,
2169 0x2 << WM8904_VMID_RES_SHIFT);
2170
2171 /* Bias current *0.5 */
2172 snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
2173 WM8904_ISEL_MASK, 0);
2174 break;
2175
2176 case SND_SOC_BIAS_OFF:
2177 /* Turn off VMID */
2178 snd_soc_update_bits(codec, WM8904_VMID_CONTROL_0,
2179 WM8904_VMID_RES_MASK | WM8904_VMID_ENA, 0);
2180
2181 /* Stop bias generation */
2182 snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
2183 WM8904_BIAS_ENA, 0);
2184
2185 #ifdef CONFIG_REGULATOR
2186 /* Post 2.6.34 we will be able to get a callback when
2187 * the regulators are disabled which we can use but
2188 * for now just assume that the power will be cut if
2189 * the regulator API is in use.
2190 */
2191 codec->cache_sync = 1;
2192 #endif
2193
2194 regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
2195 wm8904->supplies);
2196 break;
2197 }
2198 codec->dapm.bias_level = level;
2199 return 0;
2200 }
2201
2202 #define WM8904_RATES SNDRV_PCM_RATE_8000_96000
2203
2204 #define WM8904_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE |\
2205 SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE)
2206
2207 static const struct snd_soc_dai_ops wm8904_dai_ops = {
2208 .set_sysclk = wm8904_set_sysclk,
2209 .set_fmt = wm8904_set_fmt,
2210 .set_tdm_slot = wm8904_set_tdm_slot,
2211 .set_pll = wm8904_set_fll,
2212 .hw_params = wm8904_hw_params,
2213 .digital_mute = wm8904_digital_mute,
2214 };
2215
2216 static struct snd_soc_dai_driver wm8904_dai = {
2217 .name = "wm8904-hifi",
2218 .playback = {
2219 .stream_name = "Playback",
2220 .channels_min = 2,
2221 .channels_max = 2,
2222 .rates = WM8904_RATES,
2223 .formats = WM8904_FORMATS,
2224 },
2225 .capture = {
2226 .stream_name = "Capture",
2227 .channels_min = 2,
2228 .channels_max = 2,
2229 .rates = WM8904_RATES,
2230 .formats = WM8904_FORMATS,
2231 },
2232 .ops = &wm8904_dai_ops,
2233 .symmetric_rates = 1,
2234 };
2235
2236 #ifdef CONFIG_PM
2237 static int wm8904_suspend(struct snd_soc_codec *codec)
2238 {
2239 wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
2240
2241 return 0;
2242 }
2243
2244 static int wm8904_resume(struct snd_soc_codec *codec)
2245 {
2246 wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
2247
2248 return 0;
2249 }
2250 #else
2251 #define wm8904_suspend NULL
2252 #define wm8904_resume NULL
2253 #endif
2254
2255 static void wm8904_handle_retune_mobile_pdata(struct snd_soc_codec *codec)
2256 {
2257 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
2258 struct wm8904_pdata *pdata = wm8904->pdata;
2259 struct snd_kcontrol_new control =
2260 SOC_ENUM_EXT("EQ Mode",
2261 wm8904->retune_mobile_enum,
2262 wm8904_get_retune_mobile_enum,
2263 wm8904_put_retune_mobile_enum);
2264 int ret, i, j;
2265 const char **t;
2266
2267 /* We need an array of texts for the enum API but the number
2268 * of texts is likely to be less than the number of
2269 * configurations due to the sample rate dependency of the
2270 * configurations. */
2271 wm8904->num_retune_mobile_texts = 0;
2272 wm8904->retune_mobile_texts = NULL;
2273 for (i = 0; i < pdata->num_retune_mobile_cfgs; i++) {
2274 for (j = 0; j < wm8904->num_retune_mobile_texts; j++) {
2275 if (strcmp(pdata->retune_mobile_cfgs[i].name,
2276 wm8904->retune_mobile_texts[j]) == 0)
2277 break;
2278 }
2279
2280 if (j != wm8904->num_retune_mobile_texts)
2281 continue;
2282
2283 /* Expand the array... */
2284 t = krealloc(wm8904->retune_mobile_texts,
2285 sizeof(char *) *
2286 (wm8904->num_retune_mobile_texts + 1),
2287 GFP_KERNEL);
2288 if (t == NULL)
2289 continue;
2290
2291 /* ...store the new entry... */
2292 t[wm8904->num_retune_mobile_texts] =
2293 pdata->retune_mobile_cfgs[i].name;
2294
2295 /* ...and remember the new version. */
2296 wm8904->num_retune_mobile_texts++;
2297 wm8904->retune_mobile_texts = t;
2298 }
2299
2300 dev_dbg(codec->dev, "Allocated %d unique ReTune Mobile names\n",
2301 wm8904->num_retune_mobile_texts);
2302
2303 wm8904->retune_mobile_enum.max = wm8904->num_retune_mobile_texts;
2304 wm8904->retune_mobile_enum.texts = wm8904->retune_mobile_texts;
2305
2306 ret = snd_soc_add_controls(codec, &control, 1);
2307 if (ret != 0)
2308 dev_err(codec->dev,
2309 "Failed to add ReTune Mobile control: %d\n", ret);
2310 }
2311
2312 static void wm8904_handle_pdata(struct snd_soc_codec *codec)
2313 {
2314 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
2315 struct wm8904_pdata *pdata = wm8904->pdata;
2316 int ret, i;
2317
2318 if (!pdata) {
2319 snd_soc_add_controls(codec, wm8904_eq_controls,
2320 ARRAY_SIZE(wm8904_eq_controls));
2321 return;
2322 }
2323
2324 dev_dbg(codec->dev, "%d DRC configurations\n", pdata->num_drc_cfgs);
2325
2326 if (pdata->num_drc_cfgs) {
2327 struct snd_kcontrol_new control =
2328 SOC_ENUM_EXT("DRC Mode", wm8904->drc_enum,
2329 wm8904_get_drc_enum, wm8904_put_drc_enum);
2330
2331 /* We need an array of texts for the enum API */
2332 wm8904->drc_texts = kmalloc(sizeof(char *)
2333 * pdata->num_drc_cfgs, GFP_KERNEL);
2334 if (!wm8904->drc_texts) {
2335 dev_err(codec->dev,
2336 "Failed to allocate %d DRC config texts\n",
2337 pdata->num_drc_cfgs);
2338 return;
2339 }
2340
2341 for (i = 0; i < pdata->num_drc_cfgs; i++)
2342 wm8904->drc_texts[i] = pdata->drc_cfgs[i].name;
2343
2344 wm8904->drc_enum.max = pdata->num_drc_cfgs;
2345 wm8904->drc_enum.texts = wm8904->drc_texts;
2346
2347 ret = snd_soc_add_controls(codec, &control, 1);
2348 if (ret != 0)
2349 dev_err(codec->dev,
2350 "Failed to add DRC mode control: %d\n", ret);
2351
2352 wm8904_set_drc(codec);
2353 }
2354
2355 dev_dbg(codec->dev, "%d ReTune Mobile configurations\n",
2356 pdata->num_retune_mobile_cfgs);
2357
2358 if (pdata->num_retune_mobile_cfgs)
2359 wm8904_handle_retune_mobile_pdata(codec);
2360 else
2361 snd_soc_add_controls(codec, wm8904_eq_controls,
2362 ARRAY_SIZE(wm8904_eq_controls));
2363 }
2364
2365
2366 static int wm8904_probe(struct snd_soc_codec *codec)
2367 {
2368 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
2369 struct wm8904_pdata *pdata = wm8904->pdata;
2370 u16 *reg_cache = codec->reg_cache;
2371 int ret, i;
2372
2373 codec->cache_sync = 1;
2374 codec->dapm.idle_bias_off = 1;
2375
2376 switch (wm8904->devtype) {
2377 case WM8904:
2378 break;
2379 case WM8912:
2380 memset(&wm8904_dai.capture, 0, sizeof(wm8904_dai.capture));
2381 break;
2382 default:
2383 dev_err(codec->dev, "Unknown device type %d\n",
2384 wm8904->devtype);
2385 return -EINVAL;
2386 }
2387
2388 ret = snd_soc_codec_set_cache_io(codec, 8, 16, SND_SOC_I2C);
2389 if (ret != 0) {
2390 dev_err(codec->dev, "Failed to set cache I/O: %d\n", ret);
2391 return ret;
2392 }
2393
2394 for (i = 0; i < ARRAY_SIZE(wm8904->supplies); i++)
2395 wm8904->supplies[i].supply = wm8904_supply_names[i];
2396
2397 ret = regulator_bulk_get(codec->dev, ARRAY_SIZE(wm8904->supplies),
2398 wm8904->supplies);
2399 if (ret != 0) {
2400 dev_err(codec->dev, "Failed to request supplies: %d\n", ret);
2401 return ret;
2402 }
2403
2404 ret = regulator_bulk_enable(ARRAY_SIZE(wm8904->supplies),
2405 wm8904->supplies);
2406 if (ret != 0) {
2407 dev_err(codec->dev, "Failed to enable supplies: %d\n", ret);
2408 goto err_get;
2409 }
2410
2411 ret = snd_soc_read(codec, WM8904_SW_RESET_AND_ID);
2412 if (ret < 0) {
2413 dev_err(codec->dev, "Failed to read ID register\n");
2414 goto err_enable;
2415 }
2416 if (ret != wm8904_reg[WM8904_SW_RESET_AND_ID]) {
2417 dev_err(codec->dev, "Device is not a WM8904, ID is %x\n", ret);
2418 ret = -EINVAL;
2419 goto err_enable;
2420 }
2421
2422 ret = snd_soc_read(codec, WM8904_REVISION);
2423 if (ret < 0) {
2424 dev_err(codec->dev, "Failed to read device revision: %d\n",
2425 ret);
2426 goto err_enable;
2427 }
2428 dev_info(codec->dev, "revision %c\n", ret + 'A');
2429
2430 ret = wm8904_reset(codec);
2431 if (ret < 0) {
2432 dev_err(codec->dev, "Failed to issue reset\n");
2433 goto err_enable;
2434 }
2435
2436 /* Change some default settings - latch VU and enable ZC */
2437 snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
2438 WM8904_ADC_VU, WM8904_ADC_VU);
2439 snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_RIGHT,
2440 WM8904_ADC_VU, WM8904_ADC_VU);
2441 snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_VOLUME_LEFT,
2442 WM8904_DAC_VU, WM8904_DAC_VU);
2443 snd_soc_update_bits(codec, WM8904_DAC_DIGITAL_VOLUME_RIGHT,
2444 WM8904_DAC_VU, WM8904_DAC_VU);
2445 snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT1_LEFT,
2446 WM8904_HPOUT_VU | WM8904_HPOUTLZC,
2447 WM8904_HPOUT_VU | WM8904_HPOUTLZC);
2448 snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT1_RIGHT,
2449 WM8904_HPOUT_VU | WM8904_HPOUTRZC,
2450 WM8904_HPOUT_VU | WM8904_HPOUTRZC);
2451 snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT2_LEFT,
2452 WM8904_LINEOUT_VU | WM8904_LINEOUTLZC,
2453 WM8904_LINEOUT_VU | WM8904_LINEOUTLZC);
2454 snd_soc_update_bits(codec, WM8904_ANALOGUE_OUT2_RIGHT,
2455 WM8904_LINEOUT_VU | WM8904_LINEOUTRZC,
2456 WM8904_LINEOUT_VU | WM8904_LINEOUTRZC);
2457 snd_soc_update_bits(codec, WM8904_CLOCK_RATES_0,
2458 WM8904_SR_MODE, 0);
2459
2460 /* Apply configuration from the platform data. */
2461 if (wm8904->pdata) {
2462 for (i = 0; i < WM8904_GPIO_REGS; i++) {
2463 if (!pdata->gpio_cfg[i])
2464 continue;
2465
2466 reg_cache[WM8904_GPIO_CONTROL_1 + i]
2467 = pdata->gpio_cfg[i] & 0xffff;
2468 }
2469
2470 /* Zero is the default value for these anyway */
2471 for (i = 0; i < WM8904_MIC_REGS; i++)
2472 reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
2473 = pdata->mic_cfg[i];
2474 }
2475
2476 /* Set Class W by default - this will be managed by the Class
2477 * G widget at runtime where bypass paths are available.
2478 */
2479 snd_soc_update_bits(codec, WM8904_CLASS_W_0,
2480 WM8904_CP_DYN_PWR, WM8904_CP_DYN_PWR);
2481
2482 /* Use normal bias source */
2483 snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
2484 WM8904_POBCTRL, 0);
2485
2486 wm8904_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
2487
2488 /* Bias level configuration will have done an extra enable */
2489 regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
2490
2491 wm8904_handle_pdata(codec);
2492
2493 wm8904_add_widgets(codec);
2494
2495 return 0;
2496
2497 err_enable:
2498 regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
2499 err_get:
2500 regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
2501 return ret;
2502 }
2503
2504 static int wm8904_remove(struct snd_soc_codec *codec)
2505 {
2506 struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
2507
2508 wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
2509 regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
2510 kfree(wm8904->retune_mobile_texts);
2511 kfree(wm8904->drc_texts);
2512
2513 return 0;
2514 }
2515
2516 static struct snd_soc_codec_driver soc_codec_dev_wm8904 = {
2517 .probe = wm8904_probe,
2518 .remove = wm8904_remove,
2519 .suspend = wm8904_suspend,
2520 .resume = wm8904_resume,
2521 .set_bias_level = wm8904_set_bias_level,
2522 .reg_cache_size = ARRAY_SIZE(wm8904_reg),
2523 .reg_word_size = sizeof(u16),
2524 .reg_cache_default = wm8904_reg,
2525 .volatile_register = wm8904_volatile_register,
2526 };
2527
2528 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
2529 static __devinit int wm8904_i2c_probe(struct i2c_client *i2c,
2530 const struct i2c_device_id *id)
2531 {
2532 struct wm8904_priv *wm8904;
2533 int ret;
2534
2535 wm8904 = kzalloc(sizeof(struct wm8904_priv), GFP_KERNEL);
2536 if (wm8904 == NULL)
2537 return -ENOMEM;
2538
2539 wm8904->devtype = id->driver_data;
2540 i2c_set_clientdata(i2c, wm8904);
2541 wm8904->pdata = i2c->dev.platform_data;
2542
2543 ret = snd_soc_register_codec(&i2c->dev,
2544 &soc_codec_dev_wm8904, &wm8904_dai, 1);
2545 if (ret < 0)
2546 kfree(wm8904);
2547 return ret;
2548 }
2549
2550 static __devexit int wm8904_i2c_remove(struct i2c_client *client)
2551 {
2552 snd_soc_unregister_codec(&client->dev);
2553 kfree(i2c_get_clientdata(client));
2554 return 0;
2555 }
2556
2557 static const struct i2c_device_id wm8904_i2c_id[] = {
2558 { "wm8904", WM8904 },
2559 { "wm8912", WM8912 },
2560 { "wm8918", WM8904 }, /* Actually a subset, updates to follow */
2561 { }
2562 };
2563 MODULE_DEVICE_TABLE(i2c, wm8904_i2c_id);
2564
2565 static struct i2c_driver wm8904_i2c_driver = {
2566 .driver = {
2567 .name = "wm8904",
2568 .owner = THIS_MODULE,
2569 },
2570 .probe = wm8904_i2c_probe,
2571 .remove = __devexit_p(wm8904_i2c_remove),
2572 .id_table = wm8904_i2c_id,
2573 };
2574 #endif
2575
2576 static int __init wm8904_modinit(void)
2577 {
2578 int ret = 0;
2579 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
2580 ret = i2c_add_driver(&wm8904_i2c_driver);
2581 if (ret != 0) {
2582 printk(KERN_ERR "Failed to register wm8904 I2C driver: %d\n",
2583 ret);
2584 }
2585 #endif
2586 return ret;
2587 }
2588 module_init(wm8904_modinit);
2589
2590 static void __exit wm8904_exit(void)
2591 {
2592 #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
2593 i2c_del_driver(&wm8904_i2c_driver);
2594 #endif
2595 }
2596 module_exit(wm8904_exit);
2597
2598 MODULE_DESCRIPTION("ASoC WM8904 driver");
2599 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
2600 MODULE_LICENSE("GPL");