sound/soc/samsung/s3c24xx_uda134x.c

   1 /*
   2  * Modifications by Christian Pellegrin <chripell@evolware.org>
   3  *
   4  * s3c24xx_uda134x.c  --  S3C24XX_UDA134X ALSA SoC Audio board driver
   5  *
   6  * Copyright 2007 Dension Audio Systems Ltd.
   7  * Author: Zoltan Devai
   8  *
   9  * This program is free software; you can redistribute it and/or modify
  10  * it under the terms of the GNU General Public License version 2 as
  11  * published by the Free Software Foundation.
  12  */
  13
  14 #include <linux/clk.h>
  15 #include <linux/gpio.h>
  16 #include <linux/module.h>
  17
  18 #include <sound/soc.h>
  19 #include <sound/s3c24xx_uda134x.h>
  20
  21 #include <plat/regs-iis.h>
  22
  23 #include "s3c24xx-i2s.h"
  24
  25 /* #define ENFORCE_RATES 1 */
  26 /*
  27   Unfortunately the S3C24XX in master mode has a limited capacity of
  28   generating the clock for the codec. If you define this only rates
  29   that are really available will be enforced. But be careful, most
  30   user level application just want the usual sampling frequencies (8,
  31   11.025, 22.050, 44.1 kHz) and anyway resampling is a costly
  32   operation for embedded systems. So if you aren't very lucky or your
  33   hardware engineer wasn't very forward-looking it's better to leave
  34   this undefined. If you do so an approximate value for the requested
  35   sampling rate in the range -/+ 5% will be chosen. If this in not
  36   possible an error will be returned.
  37 */
  38
  39 static struct clk *xtal;
  40 static struct clk *pclk;
  41 /* this is need because we don't have a place where to keep the
  42  * pointers to the clocks in each substream. We get the clocks only
  43  * when we are actually using them so we don't block stuff like
  44  * frequency change or oscillator power-off */
  45 static int clk_users;
  46 static DEFINE_MUTEX(clk_lock);
  47
  48 static unsigned int rates[33 * 2];
  49 #ifdef ENFORCE_RATES
  50 static struct snd_pcm_hw_constraint_list hw_constraints_rates = {
  51         .count  = ARRAY_SIZE(rates),
  52         .list   = rates,
  53         .mask   = 0,
  54 };
  55 #endif
  56
  57 static struct platform_device *s3c24xx_uda134x_snd_device;
  58
  59 static int s3c24xx_uda134x_startup(struct snd_pcm_substream *substream)
  60 {
  61         int ret = 0;
  62 #ifdef ENFORCE_RATES
  63         struct snd_pcm_runtime *runtime = substream->runtime;
  64 #endif
  65
  66         mutex_lock(&clk_lock);
  67         pr_debug("%s %d\n", __func__, clk_users);
  68         if (clk_users == 0) {
  69                 xtal = clk_get(&s3c24xx_uda134x_snd_device->dev, "xtal");
  70                 if (IS_ERR(xtal)) {
  71                         printk(KERN_ERR "%s cannot get xtal\n", __func__);
  72                         ret = PTR_ERR(xtal);
  73                 } else {
  74                         pclk = clk_get(&s3c24xx_uda134x_snd_device->dev,
  75                                        "pclk");
  76                         if (IS_ERR(pclk)) {
  77                                 printk(KERN_ERR "%s cannot get pclk\n",
  78                                        __func__);
  79                                 clk_put(xtal);
  80                                 ret = PTR_ERR(pclk);
  81                         }
  82                 }
  83                 if (!ret) {
  84                         int i, j;
  85
  86                         for (i = 0; i < 2; i++) {
  87                                 int fs = i ? 256 : 384;
  88
  89                                 rates[i*33] = clk_get_rate(xtal) / fs;
  90                                 for (j = 1; j < 33; j++)
  91                                         rates[i*33 + j] = clk_get_rate(pclk) /
  92                                                 (j * fs);
  93                         }
  94                 }
  95         }
  96         clk_users += 1;
  97         mutex_unlock(&clk_lock);
  98         if (!ret) {
  99 #ifdef ENFORCE_RATES
 100                 ret = snd_pcm_hw_constraint_list(runtime, 0,
 101                                                  SNDRV_PCM_HW_PARAM_RATE,
 102                                                  &hw_constraints_rates);
 103                 if (ret < 0)
 104                         printk(KERN_ERR "%s cannot set constraints\n",
 105                                __func__);
 106 #endif
 107         }
 108         return ret;
 109 }
 110
 111 static void s3c24xx_uda134x_shutdown(struct snd_pcm_substream *substream)
 112 {
 113         mutex_lock(&clk_lock);
 114         pr_debug("%s %d\n", __func__, clk_users);
 115         clk_users -= 1;
 116         if (clk_users == 0) {
 117                 clk_put(xtal);
 118                 xtal = NULL;
 119                 clk_put(pclk);
 120                 pclk = NULL;
 121         }
 122         mutex_unlock(&clk_lock);
 123 }
 124
 125 static int s3c24xx_uda134x_hw_params(struct snd_pcm_substream *substream,
 126                                         struct snd_pcm_hw_params *params)
 127 {
 128         struct snd_soc_pcm_runtime *rtd = substream->private_data;
 129         struct snd_soc_dai *codec_dai = rtd->codec_dai;
 130         struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
 131         unsigned int clk = 0;
 132         int ret = 0;
 133         int clk_source, fs_mode;
 134         unsigned long rate = params_rate(params);
 135         long err, cerr;
 136         unsigned int div;
 137         int i, bi;
 138
 139         err = 999999;
 140         bi = 0;
 141         for (i = 0; i < 2*33; i++) {
 142                 cerr = rates[i] - rate;
 143                 if (cerr < 0)
 144                         cerr = -cerr;
 145                 if (cerr < err) {
 146                         err = cerr;
 147                         bi = i;
 148                 }
 149         }
 150         if (bi / 33 == 1)
 151                 fs_mode = S3C2410_IISMOD_256FS;
 152         else
 153                 fs_mode = S3C2410_IISMOD_384FS;
 154         if (bi % 33 == 0) {
 155                 clk_source = S3C24XX_CLKSRC_MPLL;
 156                 div = 1;
 157         } else {
 158                 clk_source = S3C24XX_CLKSRC_PCLK;
 159                 div = bi % 33;
 160         }
 161         pr_debug("%s desired rate %lu, %d\n", __func__, rate, bi);
 162
 163         clk = (fs_mode == S3C2410_IISMOD_384FS ? 384 : 256) * rate;
 164         pr_debug("%s will use: %s %s %d sysclk %d err %ld\n", __func__,
 165                  fs_mode == S3C2410_IISMOD_384FS ? "384FS" : "256FS",
 166                  clk_source == S3C24XX_CLKSRC_MPLL ? "MPLLin" : "PCLK",
 167                  div, clk, err);
 168
 169         if ((err * 100 / rate) > 5) {
 170                 printk(KERN_ERR "S3C24XX_UDA134X: effective frequency "
 171                        "too different from desired (%ld%%)\n",
 172                        err * 100 / rate);
 173                 return -EINVAL;
 174         }
 175
 176         ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
 177                         SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
 178         if (ret < 0)
 179                 return ret;
 180
 181         ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S |
 182                         SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
 183         if (ret < 0)
 184                 return ret;
 185
 186         ret = snd_soc_dai_set_sysclk(cpu_dai, clk_source , clk,
 187                         SND_SOC_CLOCK_IN);
 188         if (ret < 0)
 189                 return ret;
 190
 191         ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK, fs_mode);
 192         if (ret < 0)
 193                 return ret;
 194
 195         ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_BCLK,
 196                         S3C2410_IISMOD_32FS);
 197         if (ret < 0)
 198                 return ret;
 199
 200         ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
 201                         S3C24XX_PRESCALE(div, div));
 202         if (ret < 0)
 203                 return ret;
 204
 205         /* set the codec system clock for DAC and ADC */
 206         ret = snd_soc_dai_set_sysclk(codec_dai, 0, clk,
 207                         SND_SOC_CLOCK_OUT);
 208         if (ret < 0)
 209                 return ret;
 210
 211         return 0;
 212 }
 213
 214 static struct snd_soc_ops s3c24xx_uda134x_ops = {
 215         .startup = s3c24xx_uda134x_startup,
 216         .shutdown = s3c24xx_uda134x_shutdown,
 217         .hw_params = s3c24xx_uda134x_hw_params,
 218 };
 219
 220 static struct snd_soc_dai_link s3c24xx_uda134x_dai_link = {
 221         .name = "UDA134X",
 222         .stream_name = "UDA134X",
 223         .codec_name = "uda134x-codec",
 224         .codec_dai_name = "uda134x-hifi",
 225         .cpu_dai_name = "s3c24xx-iis",
 226         .ops = &s3c24xx_uda134x_ops,
 227         .platform_name  = "samsung-audio",
 228 };
 229
 230 static struct snd_soc_card snd_soc_s3c24xx_uda134x = {
 231         .name = "S3C24XX_UDA134X",
 232         .owner = THIS_MODULE,
 233         .dai_link = &s3c24xx_uda134x_dai_link,
 234         .num_links = 1,
 235 };
 236
 237 static struct s3c24xx_uda134x_platform_data *s3c24xx_uda134x_l3_pins;
 238
 239 static void setdat(int v)
 240 {
 241         gpio_set_value(s3c24xx_uda134x_l3_pins->l3_data, v > 0);
 242 }
 243
 244 static void setclk(int v)
 245 {
 246         gpio_set_value(s3c24xx_uda134x_l3_pins->l3_clk, v > 0);
 247 }
 248
 249 static void setmode(int v)
 250 {
 251         gpio_set_value(s3c24xx_uda134x_l3_pins->l3_mode, v > 0);
 252 }
 253
 254 /* FIXME - This must be codec platform data but in which board file ?? */
 255 static struct uda134x_platform_data s3c24xx_uda134x = {
 256         .l3 = {
 257                 .setdat = setdat,
 258                 .setclk = setclk,
 259                 .setmode = setmode,
 260                 .data_hold = 1,
 261                 .data_setup = 1,
 262                 .clock_high = 1,
 263                 .mode_hold = 1,
 264                 .mode = 1,
 265                 .mode_setup = 1,
 266         },
 267 };
 268
 269 static int s3c24xx_uda134x_setup_pin(int pin, char *fun)
 270 {
 271         if (gpio_request(pin, "s3c24xx_uda134x") < 0) {
 272                 printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
 273                        "l3 %s pin already in use", fun);
 274                 return -EBUSY;
 275         }
 276         gpio_direction_output(pin, 0);
 277         return 0;
 278 }
 279
 280 static int s3c24xx_uda134x_probe(struct platform_device *pdev)
 281 {
 282         int ret;
 283
 284         printk(KERN_INFO "S3C24XX_UDA134X SoC Audio driver\n");
 285
 286         s3c24xx_uda134x_l3_pins = pdev->dev.platform_data;
 287         if (s3c24xx_uda134x_l3_pins == NULL) {
 288                 printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
 289                        "unable to find platform data\n");
 290                 return -ENODEV;
 291         }
 292         s3c24xx_uda134x.power = s3c24xx_uda134x_l3_pins->power;
 293         s3c24xx_uda134x.model = s3c24xx_uda134x_l3_pins->model;
 294
 295         if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_data,
 296                                       "data") < 0)
 297                 return -EBUSY;
 298         if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_clk,
 299                                       "clk") < 0) {
 300                 gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
 301                 return -EBUSY;
 302         }
 303         if (s3c24xx_uda134x_setup_pin(s3c24xx_uda134x_l3_pins->l3_mode,
 304                                       "mode") < 0) {
 305                 gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
 306                 gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
 307                 return -EBUSY;
 308         }
 309
 310         s3c24xx_uda134x_snd_device = platform_device_alloc("soc-audio", -1);
 311         if (!s3c24xx_uda134x_snd_device) {
 312                 printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: "
 313                        "Unable to register\n");
 314                 return -ENOMEM;
 315         }
 316
 317         platform_set_drvdata(s3c24xx_uda134x_snd_device,
 318                              &snd_soc_s3c24xx_uda134x);
 319         platform_device_add_data(s3c24xx_uda134x_snd_device, &s3c24xx_uda134x, sizeof(s3c24xx_uda134x));
 320         ret = platform_device_add(s3c24xx_uda134x_snd_device);
 321         if (ret) {
 322                 printk(KERN_ERR "S3C24XX_UDA134X SoC Audio: Unable to add\n");
 323                 platform_device_put(s3c24xx_uda134x_snd_device);
 324         }
 325
 326         return ret;
 327 }
 328
 329 static int s3c24xx_uda134x_remove(struct platform_device *pdev)
 330 {
 331         platform_device_unregister(s3c24xx_uda134x_snd_device);
 332         gpio_free(s3c24xx_uda134x_l3_pins->l3_data);
 333         gpio_free(s3c24xx_uda134x_l3_pins->l3_clk);
 334         gpio_free(s3c24xx_uda134x_l3_pins->l3_mode);
 335         return 0;
 336 }
 337
 338 static struct platform_driver s3c24xx_uda134x_driver = {
 339         .probe  = s3c24xx_uda134x_probe,
 340         .remove = s3c24xx_uda134x_remove,
 341         .driver = {
 342                 .name = "s3c24xx_uda134x",
 343                 .owner = THIS_MODULE,
 344         },
 345 };
 346
 347 module_platform_driver(s3c24xx_uda134x_driver);
 348
 349 MODULE_AUTHOR("Zoltan Devai, Christian Pellegrin <chripell@evolware.org>");
 350 MODULE_DESCRIPTION("S3C24XX_UDA134X ALSA SoC audio driver");
 351 MODULE_LICENSE("GPL");