sh: switch ap325rxa to dynamically manage the platform camera
[zen-stable.git] / kernel / power / suspend_test.c
blob25596e450ac723d7a9409cb304784224f5fe3990
1 /*
2 * kernel/power/suspend_test.c - Suspend to RAM and standby test facility.
4 * Copyright (c) 2009 Pavel Machek <pavel@ucw.cz>
6 * This file is released under the GPLv2.
7 */
9 #include <linux/init.h>
10 #include <linux/rtc.h>
12 #include "power.h"
15 * We test the system suspend code by setting an RTC wakealarm a short
16 * time in the future, then suspending. Suspending the devices won't
17 * normally take long ... some systems only need a few milliseconds.
19 * The time it takes is system-specific though, so when we test this
20 * during system bootup we allow a LOT of time.
22 #define TEST_SUSPEND_SECONDS 10
24 static unsigned long suspend_test_start_time;
26 void suspend_test_start(void)
28 /* FIXME Use better timebase than "jiffies", ideally a clocksource.
29 * What we want is a hardware counter that will work correctly even
30 * during the irqs-are-off stages of the suspend/resume cycle...
32 suspend_test_start_time = jiffies;
35 void suspend_test_finish(const char *label)
37 long nj = jiffies - suspend_test_start_time;
38 unsigned msec;
40 msec = jiffies_to_msecs(abs(nj));
41 pr_info("PM: %s took %d.%03d seconds\n", label,
42 msec / 1000, msec % 1000);
44 /* Warning on suspend means the RTC alarm period needs to be
45 * larger -- the system was sooo slooowwww to suspend that the
46 * alarm (should have) fired before the system went to sleep!
48 * Warning on either suspend or resume also means the system
49 * has some performance issues. The stack dump of a WARN_ON
50 * is more likely to get the right attention than a printk...
52 WARN(msec > (TEST_SUSPEND_SECONDS * 1000),
53 "Component: %s, time: %u\n", label, msec);
57 * To test system suspend, we need a hands-off mechanism to resume the
58 * system. RTCs wake alarms are a common self-contained mechanism.
61 static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
63 static char err_readtime[] __initdata =
64 KERN_ERR "PM: can't read %s time, err %d\n";
65 static char err_wakealarm [] __initdata =
66 KERN_ERR "PM: can't set %s wakealarm, err %d\n";
67 static char err_suspend[] __initdata =
68 KERN_ERR "PM: suspend test failed, error %d\n";
69 static char info_test[] __initdata =
70 KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
72 unsigned long now;
73 struct rtc_wkalrm alm;
74 int status;
76 /* this may fail if the RTC hasn't been initialized */
77 status = rtc_read_time(rtc, &alm.time);
78 if (status < 0) {
79 printk(err_readtime, dev_name(&rtc->dev), status);
80 return;
82 rtc_tm_to_time(&alm.time, &now);
84 memset(&alm, 0, sizeof alm);
85 rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
86 alm.enabled = true;
88 status = rtc_set_alarm(rtc, &alm);
89 if (status < 0) {
90 printk(err_wakealarm, dev_name(&rtc->dev), status);
91 return;
94 if (state == PM_SUSPEND_MEM) {
95 printk(info_test, pm_states[state]);
96 status = pm_suspend(state);
97 if (status == -ENODEV)
98 state = PM_SUSPEND_STANDBY;
100 if (state == PM_SUSPEND_STANDBY) {
101 printk(info_test, pm_states[state]);
102 status = pm_suspend(state);
104 if (status < 0)
105 printk(err_suspend, status);
107 /* Some platforms can't detect that the alarm triggered the
108 * wakeup, or (accordingly) disable it after it afterwards.
109 * It's supposed to give oneshot behavior; cope.
111 alm.enabled = false;
112 rtc_set_alarm(rtc, &alm);
115 static int __init has_wakealarm(struct device *dev, void *name_ptr)
117 struct rtc_device *candidate = to_rtc_device(dev);
119 if (!candidate->ops->set_alarm)
120 return 0;
121 if (!device_may_wakeup(candidate->dev.parent))
122 return 0;
124 *(const char **)name_ptr = dev_name(dev);
125 return 1;
129 * Kernel options like "test_suspend=mem" force suspend/resume sanity tests
130 * at startup time. They're normally disabled, for faster boot and because
131 * we can't know which states really work on this particular system.
133 static suspend_state_t test_state __initdata = PM_SUSPEND_ON;
135 static char warn_bad_state[] __initdata =
136 KERN_WARNING "PM: can't test '%s' suspend state\n";
138 static int __init setup_test_suspend(char *value)
140 unsigned i;
142 /* "=mem" ==> "mem" */
143 value++;
144 for (i = 0; i < PM_SUSPEND_MAX; i++) {
145 if (!pm_states[i])
146 continue;
147 if (strcmp(pm_states[i], value) != 0)
148 continue;
149 test_state = (__force suspend_state_t) i;
150 return 0;
152 printk(warn_bad_state, value);
153 return 0;
155 __setup("test_suspend", setup_test_suspend);
157 static int __init test_suspend(void)
159 static char warn_no_rtc[] __initdata =
160 KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
162 char *pony = NULL;
163 struct rtc_device *rtc = NULL;
165 /* PM is initialized by now; is that state testable? */
166 if (test_state == PM_SUSPEND_ON)
167 goto done;
168 if (!valid_state(test_state)) {
169 printk(warn_bad_state, pm_states[test_state]);
170 goto done;
173 /* RTCs have initialized by now too ... can we use one? */
174 class_find_device(rtc_class, NULL, &pony, has_wakealarm);
175 if (pony)
176 rtc = rtc_class_open(pony);
177 if (!rtc) {
178 printk(warn_no_rtc);
179 goto done;
182 /* go for it */
183 test_wakealarm(rtc, test_state);
184 rtc_class_close(rtc);
185 done:
186 return 0;
188 late_initcall(test_suspend);