uwb: Use kcalloc instead of kzalloc to allocate array
[zen-stable.git] / drivers / gpio / gpio-ep93xx.c
blob1c0fc3756cb103c89c616ed6d3258b3c21864926
1 /*
2 * Generic EP93xx GPIO handling
4 * Copyright (c) 2008 Ryan Mallon
5 * Copyright (c) 2011 H Hartley Sweeten <hsweeten@visionengravers.com>
7 * Based on code originally from:
8 * linux/arch/arm/mach-ep93xx/core.c
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License version 2 as
12 * published by the Free Software Foundation.
15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
17 #include <linux/init.h>
18 #include <linux/module.h>
19 #include <linux/platform_device.h>
20 #include <linux/io.h>
21 #include <linux/gpio.h>
22 #include <linux/irq.h>
23 #include <linux/slab.h>
24 #include <linux/basic_mmio_gpio.h>
26 #include <mach/hardware.h>
27 #include <mach/gpio-ep93xx.h>
29 #define irq_to_gpio(irq) ((irq) - gpio_to_irq(0))
31 struct ep93xx_gpio {
32 void __iomem *mmio_base;
33 struct bgpio_chip bgc[8];
36 /*************************************************************************
37 * Interrupt handling for EP93xx on-chip GPIOs
38 *************************************************************************/
39 static unsigned char gpio_int_unmasked[3];
40 static unsigned char gpio_int_enabled[3];
41 static unsigned char gpio_int_type1[3];
42 static unsigned char gpio_int_type2[3];
43 static unsigned char gpio_int_debounce[3];
45 /* Port ordering is: A B F */
46 static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c };
47 static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 };
48 static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 };
49 static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 };
50 static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 };
52 static void ep93xx_gpio_update_int_params(unsigned port)
54 BUG_ON(port > 2);
56 __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port]));
58 __raw_writeb(gpio_int_type2[port],
59 EP93XX_GPIO_REG(int_type2_register_offset[port]));
61 __raw_writeb(gpio_int_type1[port],
62 EP93XX_GPIO_REG(int_type1_register_offset[port]));
64 __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port],
65 EP93XX_GPIO_REG(int_en_register_offset[port]));
68 static inline void ep93xx_gpio_int_mask(unsigned line)
70 gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7));
73 static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable)
75 int line = irq_to_gpio(irq);
76 int port = line >> 3;
77 int port_mask = 1 << (line & 7);
79 if (enable)
80 gpio_int_debounce[port] |= port_mask;
81 else
82 gpio_int_debounce[port] &= ~port_mask;
84 __raw_writeb(gpio_int_debounce[port],
85 EP93XX_GPIO_REG(int_debounce_register_offset[port]));
88 static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
90 unsigned char status;
91 int i;
93 status = __raw_readb(EP93XX_GPIO_A_INT_STATUS);
94 for (i = 0; i < 8; i++) {
95 if (status & (1 << i)) {
96 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i;
97 generic_handle_irq(gpio_irq);
101 status = __raw_readb(EP93XX_GPIO_B_INT_STATUS);
102 for (i = 0; i < 8; i++) {
103 if (status & (1 << i)) {
104 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
105 generic_handle_irq(gpio_irq);
110 static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc)
113 * map discontiguous hw irq range to continuous sw irq range:
115 * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7})
117 int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */
118 int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx;
120 generic_handle_irq(gpio_irq);
123 static void ep93xx_gpio_irq_ack(struct irq_data *d)
125 int line = irq_to_gpio(d->irq);
126 int port = line >> 3;
127 int port_mask = 1 << (line & 7);
129 if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) {
130 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
131 ep93xx_gpio_update_int_params(port);
134 __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
137 static void ep93xx_gpio_irq_mask_ack(struct irq_data *d)
139 int line = irq_to_gpio(d->irq);
140 int port = line >> 3;
141 int port_mask = 1 << (line & 7);
143 if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH)
144 gpio_int_type2[port] ^= port_mask; /* switch edge direction */
146 gpio_int_unmasked[port] &= ~port_mask;
147 ep93xx_gpio_update_int_params(port);
149 __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port]));
152 static void ep93xx_gpio_irq_mask(struct irq_data *d)
154 int line = irq_to_gpio(d->irq);
155 int port = line >> 3;
157 gpio_int_unmasked[port] &= ~(1 << (line & 7));
158 ep93xx_gpio_update_int_params(port);
161 static void ep93xx_gpio_irq_unmask(struct irq_data *d)
163 int line = irq_to_gpio(d->irq);
164 int port = line >> 3;
166 gpio_int_unmasked[port] |= 1 << (line & 7);
167 ep93xx_gpio_update_int_params(port);
171 * gpio_int_type1 controls whether the interrupt is level (0) or
172 * edge (1) triggered, while gpio_int_type2 controls whether it
173 * triggers on low/falling (0) or high/rising (1).
175 static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type)
177 const int gpio = irq_to_gpio(d->irq);
178 const int port = gpio >> 3;
179 const int port_mask = 1 << (gpio & 7);
180 irq_flow_handler_t handler;
182 gpio_direction_input(gpio);
184 switch (type) {
185 case IRQ_TYPE_EDGE_RISING:
186 gpio_int_type1[port] |= port_mask;
187 gpio_int_type2[port] |= port_mask;
188 handler = handle_edge_irq;
189 break;
190 case IRQ_TYPE_EDGE_FALLING:
191 gpio_int_type1[port] |= port_mask;
192 gpio_int_type2[port] &= ~port_mask;
193 handler = handle_edge_irq;
194 break;
195 case IRQ_TYPE_LEVEL_HIGH:
196 gpio_int_type1[port] &= ~port_mask;
197 gpio_int_type2[port] |= port_mask;
198 handler = handle_level_irq;
199 break;
200 case IRQ_TYPE_LEVEL_LOW:
201 gpio_int_type1[port] &= ~port_mask;
202 gpio_int_type2[port] &= ~port_mask;
203 handler = handle_level_irq;
204 break;
205 case IRQ_TYPE_EDGE_BOTH:
206 gpio_int_type1[port] |= port_mask;
207 /* set initial polarity based on current input level */
208 if (gpio_get_value(gpio))
209 gpio_int_type2[port] &= ~port_mask; /* falling */
210 else
211 gpio_int_type2[port] |= port_mask; /* rising */
212 handler = handle_edge_irq;
213 break;
214 default:
215 pr_err("failed to set irq type %d for gpio %d\n", type, gpio);
216 return -EINVAL;
219 __irq_set_handler_locked(d->irq, handler);
221 gpio_int_enabled[port] |= port_mask;
223 ep93xx_gpio_update_int_params(port);
225 return 0;
228 static struct irq_chip ep93xx_gpio_irq_chip = {
229 .name = "GPIO",
230 .irq_ack = ep93xx_gpio_irq_ack,
231 .irq_mask_ack = ep93xx_gpio_irq_mask_ack,
232 .irq_mask = ep93xx_gpio_irq_mask,
233 .irq_unmask = ep93xx_gpio_irq_unmask,
234 .irq_set_type = ep93xx_gpio_irq_type,
237 static void ep93xx_gpio_init_irq(void)
239 int gpio_irq;
241 for (gpio_irq = gpio_to_irq(0);
242 gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) {
243 irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip,
244 handle_level_irq);
245 set_irq_flags(gpio_irq, IRQF_VALID);
248 irq_set_chained_handler(IRQ_EP93XX_GPIO_AB,
249 ep93xx_gpio_ab_irq_handler);
250 irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX,
251 ep93xx_gpio_f_irq_handler);
252 irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX,
253 ep93xx_gpio_f_irq_handler);
254 irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX,
255 ep93xx_gpio_f_irq_handler);
256 irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX,
257 ep93xx_gpio_f_irq_handler);
258 irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX,
259 ep93xx_gpio_f_irq_handler);
260 irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX,
261 ep93xx_gpio_f_irq_handler);
262 irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX,
263 ep93xx_gpio_f_irq_handler);
264 irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX,
265 ep93xx_gpio_f_irq_handler);
269 /*************************************************************************
270 * gpiolib interface for EP93xx on-chip GPIOs
271 *************************************************************************/
272 struct ep93xx_gpio_bank {
273 const char *label;
274 int data;
275 int dir;
276 int base;
277 bool has_debounce;
280 #define EP93XX_GPIO_BANK(_label, _data, _dir, _base, _debounce) \
282 .label = _label, \
283 .data = _data, \
284 .dir = _dir, \
285 .base = _base, \
286 .has_debounce = _debounce, \
289 static struct ep93xx_gpio_bank ep93xx_gpio_banks[] = {
290 EP93XX_GPIO_BANK("A", 0x00, 0x10, 0, true),
291 EP93XX_GPIO_BANK("B", 0x04, 0x14, 8, true),
292 EP93XX_GPIO_BANK("C", 0x08, 0x18, 40, false),
293 EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24, false),
294 EP93XX_GPIO_BANK("E", 0x20, 0x24, 32, false),
295 EP93XX_GPIO_BANK("F", 0x30, 0x34, 16, true),
296 EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48, false),
297 EP93XX_GPIO_BANK("H", 0x40, 0x44, 56, false),
300 static int ep93xx_gpio_set_debounce(struct gpio_chip *chip,
301 unsigned offset, unsigned debounce)
303 int gpio = chip->base + offset;
304 int irq = gpio_to_irq(gpio);
306 if (irq < 0)
307 return -EINVAL;
309 ep93xx_gpio_int_debounce(irq, debounce ? true : false);
311 return 0;
315 * Map GPIO A0..A7 (0..7) to irq 64..71,
316 * B0..B7 (7..15) to irq 72..79, and
317 * F0..F7 (16..24) to irq 80..87.
319 static int ep93xx_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
321 int gpio = chip->base + offset;
323 if (gpio > EP93XX_GPIO_LINE_MAX_IRQ)
324 return -EINVAL;
326 return 64 + gpio;
329 static int ep93xx_gpio_add_bank(struct bgpio_chip *bgc, struct device *dev,
330 void __iomem *mmio_base, struct ep93xx_gpio_bank *bank)
332 void __iomem *data = mmio_base + bank->data;
333 void __iomem *dir = mmio_base + bank->dir;
334 int err;
336 err = bgpio_init(bgc, dev, 1, data, NULL, NULL, dir, NULL, false);
337 if (err)
338 return err;
340 bgc->gc.label = bank->label;
341 bgc->gc.base = bank->base;
343 if (bank->has_debounce) {
344 bgc->gc.set_debounce = ep93xx_gpio_set_debounce;
345 bgc->gc.to_irq = ep93xx_gpio_to_irq;
348 return gpiochip_add(&bgc->gc);
351 static int __devinit ep93xx_gpio_probe(struct platform_device *pdev)
353 struct ep93xx_gpio *ep93xx_gpio;
354 struct resource *res;
355 void __iomem *mmio;
356 int i;
357 int ret;
359 ep93xx_gpio = kzalloc(sizeof(*ep93xx_gpio), GFP_KERNEL);
360 if (!ep93xx_gpio)
361 return -ENOMEM;
363 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
364 if (!res) {
365 ret = -ENXIO;
366 goto exit_free;
369 if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
370 ret = -EBUSY;
371 goto exit_free;
374 mmio = ioremap(res->start, resource_size(res));
375 if (!mmio) {
376 ret = -ENXIO;
377 goto exit_release;
379 ep93xx_gpio->mmio_base = mmio;
381 /* Default all ports to GPIO */
382 ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
383 EP93XX_SYSCON_DEVCFG_GONK |
384 EP93XX_SYSCON_DEVCFG_EONIDE |
385 EP93XX_SYSCON_DEVCFG_GONIDE |
386 EP93XX_SYSCON_DEVCFG_HONIDE);
388 for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) {
389 struct bgpio_chip *bgc = &ep93xx_gpio->bgc[i];
390 struct ep93xx_gpio_bank *bank = &ep93xx_gpio_banks[i];
392 if (ep93xx_gpio_add_bank(bgc, &pdev->dev, mmio, bank))
393 dev_warn(&pdev->dev, "Unable to add gpio bank %s\n",
394 bank->label);
397 ep93xx_gpio_init_irq();
399 return 0;
401 exit_release:
402 release_mem_region(res->start, resource_size(res));
403 exit_free:
404 kfree(ep93xx_gpio);
405 dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, ret);
406 return ret;
409 static struct platform_driver ep93xx_gpio_driver = {
410 .driver = {
411 .name = "gpio-ep93xx",
412 .owner = THIS_MODULE,
414 .probe = ep93xx_gpio_probe,
417 static int __init ep93xx_gpio_init(void)
419 return platform_driver_register(&ep93xx_gpio_driver);
421 postcore_initcall(ep93xx_gpio_init);
423 MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com> "
424 "H Hartley Sweeten <hsweeten@visionengravers.com>");
425 MODULE_DESCRIPTION("EP93XX GPIO driver");
426 MODULE_LICENSE("GPL");