drivers/media/rc/ene_ir.h

   1 /*
   2  * driver for ENE KB3926 B/C/D/E/F CIR (also known as ENE0XXX)
   3  *
   4  * Copyright (C) 2010 Maxim Levitsky <maximlevitsky@gmail.com>
   5  *
   6  * This program is free software; you can redistribute it and/or
   7  * modify it under the terms of the GNU General Public License as
   8  * published by the Free Software Foundation; either version 2 of the
   9  * License, or (at your option) any later version.
  10  *
  11  * This program is distributed in the hope that it will be useful, but
  12  * WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  14  * General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program; if not, write to the Free Software
  18  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
  19  * USA
  20  */
  21 #include <linux/spinlock.h>
  22
  23
  24 /* hardware address */
  25 #define ENE_STATUS              0       /* hardware status - unused */
  26 #define ENE_ADDR_HI             1       /* hi byte of register address */
  27 #define ENE_ADDR_LO             2       /* low byte of register address */
  28 #define ENE_IO                  3       /* read/write window */
  29 #define ENE_IO_SIZE             4
  30
  31 /* 8 bytes of samples, divided in 2 packets*/
  32 #define ENE_FW_SAMPLE_BUFFER    0xF8F0  /* sample buffer */
  33 #define ENE_FW_SAMPLE_SPACE     0x80    /* sample is space */
  34 #define ENE_FW_PACKET_SIZE      4
  35
  36 /* first firmware flag register */
  37 #define ENE_FW1                 0xF8F8  /* flagr */
  38 #define ENE_FW1_ENABLE          0x01    /* enable fw processing */
  39 #define ENE_FW1_TXIRQ           0x02    /* TX interrupt pending */
  40 #define ENE_FW1_HAS_EXTRA_BUF   0x04    /* fw uses extra buffer*/
  41 #define ENE_FW1_EXTRA_BUF_HND   0x08    /* extra buffer handshake bit*/
  42 #define ENE_FW1_LED_ON          0x10    /* turn on a led */
  43
  44 #define ENE_FW1_WPATTERN        0x20    /* enable wake pattern */
  45 #define ENE_FW1_WAKE            0x40    /* enable wake from S3 */
  46 #define ENE_FW1_IRQ             0x80    /* enable interrupt */
  47
  48 /* second firmware flag register */
  49 #define ENE_FW2                 0xF8F9  /* flagw */
  50 #define ENE_FW2_BUF_WPTR        0x01    /* which half of the buffer to read */
  51 #define ENE_FW2_RXIRQ           0x04    /* RX IRQ pending*/
  52 #define ENE_FW2_GP0A            0x08    /* Use GPIO0A for demodulated input */
  53 #define ENE_FW2_EMMITER1_CONN   0x10    /* TX emmiter 1 connected */
  54 #define ENE_FW2_EMMITER2_CONN   0x20    /* TX emmiter 2 connected */
  55
  56 #define ENE_FW2_FAN_INPUT       0x40    /* fan input used for demodulated data*/
  57 #define ENE_FW2_LEARNING        0x80    /* hardware supports learning and TX */
  58
  59 /* firmware RX pointer for new style buffer */
  60 #define ENE_FW_RX_POINTER       0xF8FA
  61
  62 /* high parts of samples for fan input (8 samples)*/
  63 #define ENE_FW_SMPL_BUF_FAN     0xF8FB
  64 #define ENE_FW_SMPL_BUF_FAN_PLS 0x8000  /* combined sample is pulse */
  65 #define ENE_FW_SMPL_BUF_FAN_MSK 0x0FFF  /* combined sample maximum value */
  66 #define ENE_FW_SAMPLE_PERIOD_FAN 61     /* fan input has fixed sample period */
  67
  68 /* transmitter ports */
  69 #define ENE_GPIOFS1             0xFC01
  70 #define ENE_GPIOFS1_GPIO0D      0x20    /* enable tx output on GPIO0D */
  71 #define ENE_GPIOFS8             0xFC08
  72 #define ENE_GPIOFS8_GPIO41      0x02    /* enable tx output on GPIO40 */
  73
  74 /* IRQ registers block (for revision B) */
  75 #define ENEB_IRQ                0xFD09  /* IRQ number */
  76 #define ENEB_IRQ_UNK1           0xFD17  /* unknown setting = 1 */
  77 #define ENEB_IRQ_STATUS         0xFD80  /* irq status */
  78 #define ENEB_IRQ_STATUS_IR      0x20    /* IR irq */
  79
  80 /* fan as input settings */
  81 #define ENE_FAN_AS_IN1          0xFE30  /* fan init reg 1 */
  82 #define ENE_FAN_AS_IN1_EN       0xCD
  83 #define ENE_FAN_AS_IN2          0xFE31  /* fan init reg 2 */
  84 #define ENE_FAN_AS_IN2_EN       0x03
  85
  86 /* IRQ registers block (for revision C,D) */
  87 #define ENE_IRQ                 0xFE9B  /* new irq settings register */
  88 #define ENE_IRQ_MASK            0x0F    /* irq number mask */
  89 #define ENE_IRQ_UNK_EN          0x10    /* always enabled */
  90 #define ENE_IRQ_STATUS          0x20    /* irq status and ACK */
  91
  92 /* CIR Config register #1 */
  93 #define ENE_CIRCFG              0xFEC0
  94 #define ENE_CIRCFG_RX_EN        0x01    /* RX enable */
  95 #define ENE_CIRCFG_RX_IRQ       0x02    /* Enable hardware interrupt */
  96 #define ENE_CIRCFG_REV_POL      0x04    /* Input polarity reversed */
  97 #define ENE_CIRCFG_CARR_DEMOD   0x08    /* Enable carrier demodulator */
  98
  99 #define ENE_CIRCFG_TX_EN        0x10    /* TX enable */
 100 #define ENE_CIRCFG_TX_IRQ       0x20    /* Send interrupt on TX done */
 101 #define ENE_CIRCFG_TX_POL_REV   0x40    /* TX polarity reversed */
 102 #define ENE_CIRCFG_TX_CARR      0x80    /* send TX carrier or not */
 103
 104 /* CIR config register #2 */
 105 #define ENE_CIRCFG2             0xFEC1
 106 #define ENE_CIRCFG2_RLC         0x00
 107 #define ENE_CIRCFG2_RC5         0x01
 108 #define ENE_CIRCFG2_RC6         0x02
 109 #define ENE_CIRCFG2_NEC         0x03
 110 #define ENE_CIRCFG2_CARR_DETECT 0x10    /* Enable carrier detection */
 111 #define ENE_CIRCFG2_GPIO0A      0x20    /* Use GPIO0A instead of GPIO40 for input */
 112 #define ENE_CIRCFG2_FAST_SAMPL1 0x40    /* Fast leading pulse detection for RC6 */
 113 #define ENE_CIRCFG2_FAST_SAMPL2 0x80    /* Fast data detection for RC6 */
 114
 115 /* Knobs for protocol decoding - will document when/if will use them */
 116 #define ENE_CIRPF               0xFEC2
 117 #define ENE_CIRHIGH             0xFEC3
 118 #define ENE_CIRBIT              0xFEC4
 119 #define ENE_CIRSTART            0xFEC5
 120 #define ENE_CIRSTART2           0xFEC6
 121
 122 /* Actual register which contains RLC RX data - read by firmware */
 123 #define ENE_CIRDAT_IN           0xFEC7
 124
 125
 126 /* RLC configuration - sample period (1us resulution) + idle mode */
 127 #define ENE_CIRRLC_CFG          0xFEC8
 128 #define ENE_CIRRLC_CFG_OVERFLOW 0x80    /* interrupt on overflows if set */
 129 #define ENE_DEFAULT_SAMPLE_PERIOD 50
 130
 131 /* Two byte RLC TX buffer */
 132 #define ENE_CIRRLC_OUT0         0xFEC9
 133 #define ENE_CIRRLC_OUT1         0xFECA
 134 #define ENE_CIRRLC_OUT_PULSE    0x80    /* Transmitted sample is pulse */
 135 #define ENE_CIRRLC_OUT_MASK     0x7F
 136
 137
 138 /* Carrier detect setting
 139  * Low nibble  - number of carrier pulses to average
 140  * High nibble - number of initial carrier pulses to discard
 141  */
 142 #define ENE_CIRCAR_PULS         0xFECB
 143
 144 /* detected RX carrier period (resolution: 500 ns) */
 145 #define ENE_CIRCAR_PRD          0xFECC
 146 #define ENE_CIRCAR_PRD_VALID    0x80    /* data valid content valid */
 147
 148 /* detected RX carrier pulse width (resolution: 500 ns) */
 149 #define ENE_CIRCAR_HPRD         0xFECD
 150
 151 /* TX period (resolution: 500 ns, minimum 2)*/
 152 #define ENE_CIRMOD_PRD          0xFECE
 153 #define ENE_CIRMOD_PRD_POL      0x80    /* TX carrier polarity*/
 154
 155 #define ENE_CIRMOD_PRD_MAX      0x7F    /* 15.87 kHz */
 156 #define ENE_CIRMOD_PRD_MIN      0x02    /* 1 Mhz */
 157
 158 /* TX pulse width (resolution: 500 ns)*/
 159 #define ENE_CIRMOD_HPRD         0xFECF
 160
 161 /* Hardware versions */
 162 #define ENE_ECHV                0xFF00  /* hardware revision */
 163 #define ENE_PLLFRH              0xFF16
 164 #define ENE_PLLFRL              0xFF17
 165 #define ENE_DEFAULT_PLL_FREQ    1000
 166
 167 #define ENE_ECSTS               0xFF1D
 168 #define ENE_ECSTS_RSRVD         0x04
 169
 170 #define ENE_ECVER_MAJOR         0xFF1E  /* chip version */
 171 #define ENE_ECVER_MINOR         0xFF1F
 172 #define ENE_HW_VER_OLD          0xFD00
 173
 174 /******************************************************************************/
 175
 176 #define ENE_DRIVER_NAME         "ene_ir"
 177
 178 #define ENE_IRQ_RX              1
 179 #define ENE_IRQ_TX              2
 180
 181 #define  ENE_HW_B               1       /* 3926B */
 182 #define  ENE_HW_C               2       /* 3926C */
 183 #define  ENE_HW_D               3       /* 3926D or later */
 184
 185 #define ene_printk(level, text, ...) \
 186         printk(level ENE_DRIVER_NAME ": " text "\n", ## __VA_ARGS__)
 187
 188 #define ene_notice(text, ...) ene_printk(KERN_NOTICE, text, ## __VA_ARGS__)
 189 #define ene_warn(text, ...) ene_printk(KERN_WARNING, text, ## __VA_ARGS__)
 190
 191
 192 #define __dbg(level, format, ...) \
 193         do { \
 194                 if (debug >= level) \
 195                         printk(KERN_DEBUG ENE_DRIVER_NAME \
 196                                 ": " format "\n", ## __VA_ARGS__); \
 197         } while (0)
 198
 199
 200 #define dbg(format, ...)                __dbg(1, format, ## __VA_ARGS__)
 201 #define dbg_verbose(format, ...)        __dbg(2, format, ## __VA_ARGS__)
 202 #define dbg_regs(format, ...)           __dbg(3, format, ## __VA_ARGS__)
 203
 204 struct ene_device {
 205         struct pnp_dev *pnp_dev;
 206         struct rc_dev *rdev;
 207
 208         /* hw IO settings */
 209         long hw_io;
 210         int irq;
 211         spinlock_t hw_lock;
 212
 213         /* HW features */
 214         int hw_revision;                        /* hardware revision */
 215         bool hw_use_gpio_0a;                    /* gpio0a is demodulated input*/
 216         bool hw_extra_buffer;                   /* hardware has 'extra buffer' */
 217         bool hw_fan_input;                      /* fan input is IR data source */
 218         bool hw_learning_and_tx_capable;        /* learning & tx capable */
 219         int  pll_freq;
 220         int buffer_len;
 221
 222         /* Extra RX buffer location */
 223         int extra_buf1_address;
 224         int extra_buf1_len;
 225         int extra_buf2_address;
 226         int extra_buf2_len;
 227
 228         /* HW state*/
 229         int r_pointer;                          /* pointer to next sample to read */
 230         int w_pointer;                          /* pointer to next sample hw will write */
 231         bool rx_fan_input_inuse;                /* is fan input in use for rx*/
 232         int tx_reg;                             /* current reg used for TX */
 233         u8  saved_conf1;                        /* saved FEC0 reg */
 234         unsigned int tx_sample;                 /* current sample for TX */
 235         bool tx_sample_pulse;                   /* current sample is pulse */
 236
 237         /* TX buffer */
 238         int *tx_buffer;                         /* input samples buffer*/
 239         int tx_pos;                             /* position in that bufer */
 240         int tx_len;                             /* current len of tx buffer */
 241         int tx_done;                            /* done transmitting */
 242                                                 /* one more sample pending*/
 243         struct completion tx_complete;          /* TX completion */
 244         struct timer_list tx_sim_timer;
 245
 246         /* TX settings */
 247         int tx_period;
 248         int tx_duty_cycle;
 249         int transmitter_mask;
 250
 251         /* RX settings */
 252         bool learning_mode_enabled;             /* learning input enabled */
 253         bool carrier_detect_enabled;            /* carrier detect enabled */
 254         int rx_period_adjust;
 255         bool rx_enabled;
 256 };
 257
 258 static int ene_irq_status(struct ene_device *dev);
 259 static void ene_rx_read_hw_pointer(struct ene_device *dev);