2 ivtv driver initialization and card probing
3 Copyright (C) 2003-2004 Kevin Thayer <nufan_wfk at yahoo.com>
4 Copyright (C) 2004 Chris Kennedy <c@groovy.org>
5 Copyright (C) 2005-2007 Hans Verkuil <hverkuil@xs4all.nl>
7 This program is free software; you can redistribute it and/or modify
8 it under the terms of the GNU General Public License as published by
9 the Free Software Foundation; either version 2 of the License, or
10 (at your option) any later version.
12 This program is distributed in the hope that it will be useful,
13 but WITHOUT ANY WARRANTY; without even the implied warranty of
14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 GNU General Public License for more details.
17 You should have received a copy of the GNU General Public License
18 along with this program; if not, write to the Free Software
19 Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 /* Main Driver file for the ivtv project:
23 * Driver for the Conexant CX23415/CX23416 chip.
24 * Author: Kevin Thayer (nufan_wfk at yahoo.com)
26 * http://www.ivtvdriver.org
29 * MPG600/MPG160 support by T.Adachi <tadachi@tadachi-net.com>
30 * and Takeru KOMORIYA<komoriya@paken.org>
32 * AVerMedia M179 GPIO info by Chris Pinkham <cpinkham@bc2va.org>
33 * using information provided by Jiun-Kuei Jung @ AVerMedia.
35 * Kurouto Sikou CX23416GYC-STVLP tested by K.Ohta <alpha292@bremen.or.jp>
36 * using information from T.Adachi,Takeru KOMORIYA and others :-)
38 * Nagase TRANSGEAR 5000TV, Aopen VA2000MAX-STN6 and I/O data GV-MVP/RX
39 * version by T.Adachi. Special thanks Mr.Suzuki
42 #include "ivtv-driver.h"
43 #include "ivtv-version.h"
44 #include "ivtv-fileops.h"
46 #include "ivtv-firmware.h"
47 #include "ivtv-queue.h"
48 #include "ivtv-udma.h"
50 #include "ivtv-mailbox.h"
51 #include "ivtv-streams.h"
52 #include "ivtv-ioctl.h"
53 #include "ivtv-cards.h"
55 #include "ivtv-routing.h"
56 #include "ivtv-controls.h"
57 #include "ivtv-gpio.h"
59 #include <media/tveeprom.h>
60 #include <media/saa7115.h>
61 #include <media/v4l2-chip-ident.h>
62 #include "tuner-xc2028.h"
64 /* If you have already X v4l cards, then set this to X. This way
65 the device numbers stay matched. Example: you have a WinTV card
66 without radio and a PVR-350 with. Normally this would give a
67 video1 device together with a radio0 device for the PVR. By
68 setting this to 1 you ensure that radio0 is now also radio1. */
71 /* add your revision and whatnot here */
72 static struct pci_device_id ivtv_pci_tbl
[] __devinitdata
= {
73 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV15
,
74 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
75 {PCI_VENDOR_ID_ICOMP
, PCI_DEVICE_ID_IVTV16
,
76 PCI_ANY_ID
, PCI_ANY_ID
, 0, 0, 0},
80 MODULE_DEVICE_TABLE(pci
,ivtv_pci_tbl
);
82 /* ivtv instance counter */
83 static atomic_t ivtv_instance
= ATOMIC_INIT(0);
85 /* Parameter declarations */
86 static int cardtype
[IVTV_MAX_CARDS
];
87 static int tuner
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
88 -1, -1, -1, -1, -1, -1, -1, -1,
89 -1, -1, -1, -1, -1, -1, -1, -1,
90 -1, -1, -1, -1, -1, -1, -1, -1 };
91 static int radio
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
92 -1, -1, -1, -1, -1, -1, -1, -1,
93 -1, -1, -1, -1, -1, -1, -1, -1,
94 -1, -1, -1, -1, -1, -1, -1, -1 };
95 static int i2c_clock_period
[IVTV_MAX_CARDS
] = { -1, -1, -1, -1, -1, -1, -1, -1,
96 -1, -1, -1, -1, -1, -1, -1, -1,
97 -1, -1, -1, -1, -1, -1, -1, -1,
98 -1, -1, -1, -1, -1, -1, -1, -1 };
100 static unsigned int cardtype_c
= 1;
101 static unsigned int tuner_c
= 1;
102 static unsigned int radio_c
= 1;
103 static unsigned int i2c_clock_period_c
= 1;
104 static char pal
[] = "---";
105 static char secam
[] = "--";
106 static char ntsc
[] = "-";
110 /* DMA Buffers, Default size in MB allocated */
111 #define IVTV_DEFAULT_ENC_MPG_BUFFERS 4
112 #define IVTV_DEFAULT_ENC_YUV_BUFFERS 2
113 #define IVTV_DEFAULT_ENC_VBI_BUFFERS 1
114 /* Exception: size in kB for this stream (MB is overkill) */
115 #define IVTV_DEFAULT_ENC_PCM_BUFFERS 320
116 #define IVTV_DEFAULT_DEC_MPG_BUFFERS 1
117 #define IVTV_DEFAULT_DEC_YUV_BUFFERS 1
118 /* Exception: size in kB for this stream (MB is way overkill) */
119 #define IVTV_DEFAULT_DEC_VBI_BUFFERS 64
121 static int enc_mpg_buffers
= IVTV_DEFAULT_ENC_MPG_BUFFERS
;
122 static int enc_yuv_buffers
= IVTV_DEFAULT_ENC_YUV_BUFFERS
;
123 static int enc_vbi_buffers
= IVTV_DEFAULT_ENC_VBI_BUFFERS
;
124 static int enc_pcm_buffers
= IVTV_DEFAULT_ENC_PCM_BUFFERS
;
125 static int dec_mpg_buffers
= IVTV_DEFAULT_DEC_MPG_BUFFERS
;
126 static int dec_yuv_buffers
= IVTV_DEFAULT_DEC_YUV_BUFFERS
;
127 static int dec_vbi_buffers
= IVTV_DEFAULT_DEC_VBI_BUFFERS
;
129 static int ivtv_yuv_mode
;
130 static int ivtv_yuv_threshold
= -1;
131 static int ivtv_pci_latency
= 1;
134 #ifdef CONFIG_VIDEO_ADV_DEBUG
138 static int tunertype
= -1;
139 static int newi2c
= -1;
141 module_param_array(tuner
, int, &tuner_c
, 0644);
142 module_param_array(radio
, bool, &radio_c
, 0644);
143 module_param_array(cardtype
, int, &cardtype_c
, 0644);
144 module_param_string(pal
, pal
, sizeof(pal
), 0644);
145 module_param_string(secam
, secam
, sizeof(secam
), 0644);
146 module_param_string(ntsc
, ntsc
, sizeof(ntsc
), 0644);
147 module_param_named(debug
,ivtv_debug
, int, 0644);
148 #ifdef CONFIG_VIDEO_ADV_DEBUG
149 module_param_named(fw_debug
, ivtv_fw_debug
, int, 0644);
151 module_param(ivtv_pci_latency
, int, 0644);
152 module_param(ivtv_yuv_mode
, int, 0644);
153 module_param(ivtv_yuv_threshold
, int, 0644);
154 module_param(ivtv_first_minor
, int, 0644);
156 module_param(enc_mpg_buffers
, int, 0644);
157 module_param(enc_yuv_buffers
, int, 0644);
158 module_param(enc_vbi_buffers
, int, 0644);
159 module_param(enc_pcm_buffers
, int, 0644);
160 module_param(dec_mpg_buffers
, int, 0644);
161 module_param(dec_yuv_buffers
, int, 0644);
162 module_param(dec_vbi_buffers
, int, 0644);
164 module_param(tunertype
, int, 0644);
165 module_param(newi2c
, int, 0644);
166 module_param_array(i2c_clock_period
, int, &i2c_clock_period_c
, 0644);
168 MODULE_PARM_DESC(tuner
, "Tuner type selection,\n"
169 "\t\t\tsee tuner.h for values");
170 MODULE_PARM_DESC(radio
,
171 "Enable or disable the radio. Use only if autodetection\n"
172 "\t\t\tfails. 0 = disable, 1 = enable");
173 MODULE_PARM_DESC(cardtype
,
174 "Only use this option if your card is not detected properly.\n"
175 "\t\tSpecify card type:\n"
176 "\t\t\t 1 = WinTV PVR 250\n"
177 "\t\t\t 2 = WinTV PVR 350\n"
178 "\t\t\t 3 = WinTV PVR-150 or PVR-500\n"
179 "\t\t\t 4 = AVerMedia M179\n"
180 "\t\t\t 5 = YUAN MPG600/Kuroutoshikou iTVC16-STVLP\n"
181 "\t\t\t 6 = YUAN MPG160/Kuroutoshikou iTVC15-STVLP\n"
182 "\t\t\t 7 = YUAN PG600/DIAMONDMM PVR-550 (CX Falcon 2)\n"
183 "\t\t\t 8 = Adaptec AVC-2410\n"
184 "\t\t\t 9 = Adaptec AVC-2010\n"
185 "\t\t\t10 = NAGASE TRANSGEAR 5000TV\n"
186 "\t\t\t11 = AOpen VA2000MAX-STN6\n"
187 "\t\t\t12 = YUAN MPG600GR/Kuroutoshikou CX23416GYC-STVLP\n"
188 "\t\t\t13 = I/O Data GV-MVP/RX\n"
189 "\t\t\t14 = I/O Data GV-MVP/RX2E\n"
190 "\t\t\t15 = GOTVIEW PCI DVD\n"
191 "\t\t\t16 = GOTVIEW PCI DVD2 Deluxe\n"
192 "\t\t\t17 = Yuan MPC622\n"
193 "\t\t\t18 = Digital Cowboy DCT-MTVP1\n"
194 "\t\t\t19 = Yuan PG600V2/GotView PCI DVD Lite\n"
195 "\t\t\t20 = Club3D ZAP-TV1x01\n"
196 "\t\t\t21 = AverTV MCE 116 Plus\n"
197 "\t\t\t22 = ASUS Falcon2\n"
198 "\t\t\t23 = AverMedia PVR-150 Plus\n"
199 "\t\t\t24 = AverMedia EZMaker PCI Deluxe\n"
200 "\t\t\t25 = AverMedia M104 (not yet working)\n"
201 "\t\t\t26 = Buffalo PC-MV5L/PCI\n"
202 "\t\t\t27 = AVerMedia UltraTV 1500 MCE\n"
203 "\t\t\t28 = Sony VAIO Giga Pocket (ENX Kikyou)\n"
204 "\t\t\t 0 = Autodetect (default)\n"
205 "\t\t\t-1 = Ignore this card\n\t\t");
206 MODULE_PARM_DESC(pal
, "Set PAL standard: BGH, DK, I, M, N, Nc, 60");
207 MODULE_PARM_DESC(secam
, "Set SECAM standard: BGH, DK, L, LC");
208 MODULE_PARM_DESC(ntsc
, "Set NTSC standard: M, J (Japan), K (South Korea)");
209 MODULE_PARM_DESC(tunertype
,
210 "Specify tuner type:\n"
211 "\t\t\t 0 = tuner for PAL-B/G/H/D/K/I, SECAM-B/G/H/D/K/L/Lc\n"
212 "\t\t\t 1 = tuner for NTSC-M/J/K, PAL-M/N/Nc\n"
213 "\t\t\t-1 = Autodetect (default)\n");
214 MODULE_PARM_DESC(debug
,
215 "Debug level (bitmask). Default: 0\n"
216 "\t\t\t 1/0x0001: warning\n"
217 "\t\t\t 2/0x0002: info\n"
218 "\t\t\t 4/0x0004: mailbox\n"
219 "\t\t\t 8/0x0008: ioctl\n"
220 "\t\t\t 16/0x0010: file\n"
221 "\t\t\t 32/0x0020: dma\n"
222 "\t\t\t 64/0x0040: irq\n"
223 "\t\t\t 128/0x0080: decoder\n"
224 "\t\t\t 256/0x0100: yuv\n"
225 "\t\t\t 512/0x0200: i2c\n"
226 "\t\t\t1024/0x0400: high volume\n");
227 #ifdef CONFIG_VIDEO_ADV_DEBUG
228 MODULE_PARM_DESC(fw_debug
,
229 "Enable code for debugging firmware problems. Default: 0\n");
231 MODULE_PARM_DESC(ivtv_pci_latency
,
232 "Change the PCI latency to 64 if lower: 0 = No, 1 = Yes,\n"
233 "\t\t\tDefault: Yes");
234 MODULE_PARM_DESC(ivtv_yuv_mode
,
235 "Specify the yuv playback mode:\n"
236 "\t\t\t0 = interlaced\n\t\t\t1 = progressive\n\t\t\t2 = auto\n"
237 "\t\t\tDefault: 0 (interlaced)");
238 MODULE_PARM_DESC(ivtv_yuv_threshold
,
239 "If ivtv_yuv_mode is 2 (auto) then playback content as\n\t\tprogressive if src height <= ivtv_yuvthreshold\n"
240 "\t\t\tDefault: 480");
241 MODULE_PARM_DESC(enc_mpg_buffers
,
242 "Encoder MPG Buffers (in MB)\n"
243 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_MPG_BUFFERS
));
244 MODULE_PARM_DESC(enc_yuv_buffers
,
245 "Encoder YUV Buffers (in MB)\n"
246 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_YUV_BUFFERS
));
247 MODULE_PARM_DESC(enc_vbi_buffers
,
248 "Encoder VBI Buffers (in MB)\n"
249 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_VBI_BUFFERS
));
250 MODULE_PARM_DESC(enc_pcm_buffers
,
251 "Encoder PCM buffers (in kB)\n"
252 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_ENC_PCM_BUFFERS
));
253 MODULE_PARM_DESC(dec_mpg_buffers
,
254 "Decoder MPG buffers (in MB)\n"
255 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_MPG_BUFFERS
));
256 MODULE_PARM_DESC(dec_yuv_buffers
,
257 "Decoder YUV buffers (in MB)\n"
258 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_YUV_BUFFERS
));
259 MODULE_PARM_DESC(dec_vbi_buffers
,
260 "Decoder VBI buffers (in kB)\n"
261 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_DEC_VBI_BUFFERS
));
262 MODULE_PARM_DESC(newi2c
,
263 "Use new I2C implementation\n"
264 "\t\t\t-1 is autodetect, 0 is off, 1 is on\n"
265 "\t\t\tDefault is autodetect");
266 MODULE_PARM_DESC(i2c_clock_period
,
267 "Period of SCL for the I2C bus controlled by the CX23415/6\n"
268 "\t\t\tMin: 10 usec (100 kHz), Max: 4500 usec (222 Hz)\n"
269 "\t\t\tDefault: " __stringify(IVTV_DEFAULT_I2C_CLOCK_PERIOD
));
271 MODULE_PARM_DESC(ivtv_first_minor
, "Set device node number assigned to first card");
273 MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
274 MODULE_DESCRIPTION("CX23415/CX23416 driver");
275 MODULE_SUPPORTED_DEVICE
276 ("CX23415/CX23416 MPEG2 encoder (WinTV PVR-150/250/350/500,\n"
277 "\t\t\tYuan MPG series and similar)");
278 MODULE_LICENSE("GPL");
280 MODULE_VERSION(IVTV_VERSION
);
282 void ivtv_clear_irq_mask(struct ivtv
*itv
, u32 mask
)
284 itv
->irqmask
&= ~mask
;
285 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
288 void ivtv_set_irq_mask(struct ivtv
*itv
, u32 mask
)
290 itv
->irqmask
|= mask
;
291 write_reg_sync(itv
->irqmask
, IVTV_REG_IRQMASK
);
294 int ivtv_set_output_mode(struct ivtv
*itv
, int mode
)
298 spin_lock(&itv
->lock
);
299 old_mode
= itv
->output_mode
;
301 itv
->output_mode
= old_mode
= mode
;
302 spin_unlock(&itv
->lock
);
306 struct ivtv_stream
*ivtv_get_output_stream(struct ivtv
*itv
)
308 switch (itv
->output_mode
) {
310 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_MPG
];
312 return &itv
->streams
[IVTV_DEC_STREAM_TYPE_YUV
];
318 int ivtv_waitq(wait_queue_head_t
*waitq
)
322 prepare_to_wait(waitq
, &wait
, TASK_INTERRUPTIBLE
);
324 finish_wait(waitq
, &wait
);
325 return signal_pending(current
) ? -EINTR
: 0;
328 /* Generic utility functions */
329 int ivtv_msleep_timeout(unsigned int msecs
, int intr
)
331 int timeout
= msecs_to_jiffies(msecs
);
334 set_current_state(intr
? TASK_INTERRUPTIBLE
: TASK_UNINTERRUPTIBLE
);
335 timeout
= schedule_timeout(timeout
);
337 int ret
= signal_pending(current
);
346 /* Release ioremapped memory */
347 static void ivtv_iounmap(struct ivtv
*itv
)
352 /* Release registers memory */
353 if (itv
->reg_mem
!= NULL
) {
354 IVTV_DEBUG_INFO("releasing reg_mem\n");
355 iounmap(itv
->reg_mem
);
358 /* Release io memory */
359 if (itv
->has_cx23415
&& itv
->dec_mem
!= NULL
) {
360 IVTV_DEBUG_INFO("releasing dec_mem\n");
361 iounmap(itv
->dec_mem
);
365 /* Release io memory */
366 if (itv
->enc_mem
!= NULL
) {
367 IVTV_DEBUG_INFO("releasing enc_mem\n");
368 iounmap(itv
->enc_mem
);
373 /* Hauppauge card? get values from tveeprom */
374 void ivtv_read_eeprom(struct ivtv
*itv
, struct tveeprom
*tv
)
378 itv
->i2c_client
.addr
= 0xA0 >> 1;
379 tveeprom_read(&itv
->i2c_client
, eedata
, sizeof(eedata
));
380 tveeprom_hauppauge_analog(&itv
->i2c_client
, tv
, eedata
);
383 static void ivtv_process_eeprom(struct ivtv
*itv
)
386 int pci_slot
= PCI_SLOT(itv
->pdev
->devfn
);
388 ivtv_read_eeprom(itv
, &tv
);
390 /* Many thanks to Steven Toth from Hauppauge for providing the
393 /* In a few cases the PCI subsystem IDs do not correctly
394 identify the card. A better method is to check the
395 model number from the eeprom instead. */
396 case 30012 ... 30039: /* Low profile PVR250 */
397 case 32000 ... 32999:
398 case 48000 ... 48099: /* 48??? range are PVR250s with a cx23415 */
399 case 48400 ... 48599:
400 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_250
);
402 case 48100 ... 48399:
403 case 48600 ... 48999:
404 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350
);
406 case 23000 ... 23999: /* PVR500 */
407 case 25000 ... 25999: /* Low profile PVR150 */
408 case 26000 ... 26999: /* Regular PVR150 */
409 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
412 IVTV_ERR("Invalid EEPROM\n");
415 IVTV_ERR("Unknown model %d, defaulting to PVR-150\n", tv
.model
);
416 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
421 /* Old style PVR350 (with an saa7114) uses this input for
424 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_350_V1
);
430 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
431 itv
->card_name
= itv
->card
->name
;
432 itv
->card_i2c
= itv
->card
->i2c
;
434 /* If this is a PVR500 then it should be possible to detect whether it is the
435 first or second unit by looking at the subsystem device ID: is bit 4 is
436 set, then it is the second unit (according to info from Hauppauge).
438 However, while this works for most cards, I have seen a few PVR500 cards
439 where both units have the same subsystem ID.
441 So instead I look at the reported 'PCI slot' (which is the slot on the PVR500
442 PCI bridge) and if it is 8, then it is assumed to be the first unit, otherwise
443 it is the second unit. It is possible that it is a different slot when ivtv is
444 used in Xen, in that case I ignore this card here. The worst that can happen
445 is that the card presents itself with a non-working radio device.
447 This detection is needed since the eeprom reports incorrectly that a radio is
448 present on the second unit. */
449 if (tv
.model
/ 1000 == 23) {
450 static const struct ivtv_card_tuner_i2c ivtv_i2c_radio
= {
451 .radio
= { 0x60, I2C_CLIENT_END
},
452 .demod
= { 0x43, I2C_CLIENT_END
},
453 .tv
= { 0x61, I2C_CLIENT_END
},
456 itv
->card_name
= "WinTV PVR 500";
457 itv
->card_i2c
= &ivtv_i2c_radio
;
458 if (pci_slot
== 8 || pci_slot
== 9) {
459 int is_first
= (pci_slot
& 1) == 0;
461 itv
->card_name
= is_first
? "WinTV PVR 500 (unit #1)" :
462 "WinTV PVR 500 (unit #2)";
464 IVTV_INFO("Correcting tveeprom data: no radio present on second unit\n");
469 IVTV_INFO("Autodetected %s\n", itv
->card_name
);
471 switch (tv
.tuner_hauppauge_model
) {
475 itv
->pvr150_workaround
= 1;
480 if (tv
.tuner_type
== TUNER_ABSENT
)
481 IVTV_ERR("tveeprom cannot autodetect tuner!\n");
483 if (itv
->options
.tuner
== -1)
484 itv
->options
.tuner
= tv
.tuner_type
;
485 if (itv
->options
.radio
== -1)
486 itv
->options
.radio
= (tv
.has_radio
!= 0);
487 /* only enable newi2c if an IR blaster is present */
488 if (itv
->options
.newi2c
== -1 && tv
.has_ir
) {
489 itv
->options
.newi2c
= (tv
.has_ir
& 4) ? 1 : 0;
490 if (itv
->options
.newi2c
) {
491 IVTV_INFO("Reopen i2c bus for IR-blaster support\n");
498 /* user specified tuner standard */
501 /* autodetect tuner standard */
502 if (tv
.tuner_formats
& V4L2_STD_PAL
) {
503 IVTV_DEBUG_INFO("PAL tuner detected\n");
504 itv
->std
|= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
505 } else if (tv
.tuner_formats
& V4L2_STD_NTSC
) {
506 IVTV_DEBUG_INFO("NTSC tuner detected\n");
507 itv
->std
|= V4L2_STD_NTSC_M
;
508 } else if (tv
.tuner_formats
& V4L2_STD_SECAM
) {
509 IVTV_DEBUG_INFO("SECAM tuner detected\n");
510 itv
->std
|= V4L2_STD_SECAM_L
;
512 IVTV_INFO("No tuner detected, default to NTSC-M\n");
513 itv
->std
|= V4L2_STD_NTSC_M
;
517 static v4l2_std_id
ivtv_parse_std(struct ivtv
*itv
)
522 return V4L2_STD_PAL_60
;
530 return V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
534 if (pal
[1] == 'c' || pal
[1] == 'C')
535 return V4L2_STD_PAL_Nc
;
536 return V4L2_STD_PAL_N
;
540 return V4L2_STD_PAL_I
;
546 return V4L2_STD_PAL_DK
;
550 return V4L2_STD_PAL_M
;
554 IVTV_WARN("pal= argument not recognised\n");
566 return V4L2_STD_SECAM_B
| V4L2_STD_SECAM_G
| V4L2_STD_SECAM_H
;
572 return V4L2_STD_SECAM_DK
;
576 if (secam
[1] == 'C' || secam
[1] == 'c')
577 return V4L2_STD_SECAM_LC
;
578 return V4L2_STD_SECAM_L
;
582 IVTV_WARN("secam= argument not recognised\n");
590 return V4L2_STD_NTSC_M
;
594 return V4L2_STD_NTSC_M_JP
;
598 return V4L2_STD_NTSC_M_KR
;
602 IVTV_WARN("ntsc= argument not recognised\n");
610 static void ivtv_process_options(struct ivtv
*itv
)
612 const char *chipname
;
615 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_MPG
] = enc_mpg_buffers
* 1024;
616 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_YUV
] = enc_yuv_buffers
* 1024;
617 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_VBI
] = enc_vbi_buffers
* 1024;
618 itv
->options
.kilobytes
[IVTV_ENC_STREAM_TYPE_PCM
] = enc_pcm_buffers
;
619 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_MPG
] = dec_mpg_buffers
* 1024;
620 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_YUV
] = dec_yuv_buffers
* 1024;
621 itv
->options
.kilobytes
[IVTV_DEC_STREAM_TYPE_VBI
] = dec_vbi_buffers
;
622 itv
->options
.cardtype
= cardtype
[itv
->instance
];
623 itv
->options
.tuner
= tuner
[itv
->instance
];
624 itv
->options
.radio
= radio
[itv
->instance
];
626 itv
->options
.i2c_clock_period
= i2c_clock_period
[itv
->instance
];
627 if (itv
->options
.i2c_clock_period
== -1)
628 itv
->options
.i2c_clock_period
= IVTV_DEFAULT_I2C_CLOCK_PERIOD
;
629 else if (itv
->options
.i2c_clock_period
< 10)
630 itv
->options
.i2c_clock_period
= 10;
631 else if (itv
->options
.i2c_clock_period
> 4500)
632 itv
->options
.i2c_clock_period
= 4500;
634 itv
->options
.newi2c
= newi2c
;
635 if (tunertype
< -1 || tunertype
> 1) {
636 IVTV_WARN("Invalid tunertype argument, will autodetect instead\n");
639 itv
->std
= ivtv_parse_std(itv
);
640 if (itv
->std
== 0 && tunertype
>= 0)
641 itv
->std
= tunertype
? V4L2_STD_MN
: (V4L2_STD_ALL
& ~V4L2_STD_MN
);
642 itv
->has_cx23415
= (itv
->pdev
->device
== PCI_DEVICE_ID_IVTV15
);
643 chipname
= itv
->has_cx23415
? "cx23415" : "cx23416";
644 if (itv
->options
.cardtype
== -1) {
645 IVTV_INFO("Ignore card (detected %s based chip)\n", chipname
);
648 if ((itv
->card
= ivtv_get_card(itv
->options
.cardtype
- 1))) {
649 IVTV_INFO("User specified %s card (detected %s based chip)\n",
650 itv
->card
->name
, chipname
);
651 } else if (itv
->options
.cardtype
!= 0) {
652 IVTV_ERR("Unknown user specified type, trying to autodetect card\n");
654 if (itv
->card
== NULL
) {
655 if (itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE
||
656 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT1
||
657 itv
->pdev
->subsystem_vendor
== IVTV_PCI_ID_HAUPPAUGE_ALT2
) {
658 itv
->card
= ivtv_get_card(itv
->has_cx23415
? IVTV_CARD_PVR_350
: IVTV_CARD_PVR_150
);
659 IVTV_INFO("Autodetected Hauppauge card (%s based)\n",
663 if (itv
->card
== NULL
) {
664 for (i
= 0; (itv
->card
= ivtv_get_card(i
)); i
++) {
665 if (itv
->card
->pci_list
== NULL
)
667 for (j
= 0; itv
->card
->pci_list
[j
].device
; j
++) {
668 if (itv
->pdev
->device
!=
669 itv
->card
->pci_list
[j
].device
)
671 if (itv
->pdev
->subsystem_vendor
!=
672 itv
->card
->pci_list
[j
].subsystem_vendor
)
674 if (itv
->pdev
->subsystem_device
!=
675 itv
->card
->pci_list
[j
].subsystem_device
)
677 IVTV_INFO("Autodetected %s card (%s based)\n",
678 itv
->card
->name
, chipname
);
685 if (itv
->card
== NULL
) {
686 itv
->card
= ivtv_get_card(IVTV_CARD_PVR_150
);
687 IVTV_ERR("Unknown card: vendor/device: [%04x:%04x]\n",
688 itv
->pdev
->vendor
, itv
->pdev
->device
);
689 IVTV_ERR(" subsystem vendor/device: [%04x:%04x]\n",
690 itv
->pdev
->subsystem_vendor
, itv
->pdev
->subsystem_device
);
691 IVTV_ERR(" %s based\n", chipname
);
692 IVTV_ERR("Defaulting to %s card\n", itv
->card
->name
);
693 IVTV_ERR("Please mail the vendor/device and subsystem vendor/device IDs and what kind of\n");
694 IVTV_ERR("card you have to the ivtv-devel mailinglist (www.ivtvdriver.org)\n");
695 IVTV_ERR("Prefix your subject line with [UNKNOWN IVTV CARD].\n");
697 itv
->v4l2_cap
= itv
->card
->v4l2_capabilities
;
698 itv
->card_name
= itv
->card
->name
;
699 itv
->card_i2c
= itv
->card
->i2c
;
702 /* Precondition: the ivtv structure has been memset to 0. Only
703 the dev and num fields have been filled in.
704 No assumptions on the card type may be made here (see ivtv_init_struct2
707 static int __devinit
ivtv_init_struct1(struct ivtv
*itv
)
709 struct sched_param param
= { .sched_priority
= 99 };
711 itv
->base_addr
= pci_resource_start(itv
->pdev
, 0);
712 itv
->enc_mbox
.max_mbox
= 2; /* the encoder has 3 mailboxes (0-2) */
713 itv
->dec_mbox
.max_mbox
= 1; /* the decoder has 2 mailboxes (0-1) */
715 mutex_init(&itv
->serialize_lock
);
716 mutex_init(&itv
->i2c_bus_lock
);
717 mutex_init(&itv
->udma
.lock
);
719 spin_lock_init(&itv
->lock
);
720 spin_lock_init(&itv
->dma_reg_lock
);
722 init_kthread_worker(&itv
->irq_worker
);
723 itv
->irq_worker_task
= kthread_run(kthread_worker_fn
, &itv
->irq_worker
,
725 if (IS_ERR(itv
->irq_worker_task
)) {
726 IVTV_ERR("Could not create ivtv task\n");
729 /* must use the FIFO scheduler as it is realtime sensitive */
730 sched_setscheduler(itv
->irq_worker_task
, SCHED_FIFO
, ¶m
);
732 init_kthread_work(&itv
->irq_work
, ivtv_irq_work_handler
);
734 /* start counting open_id at 1 */
737 /* Initial settings */
738 itv
->cxhdl
.port
= CX2341X_PORT_MEMORY
;
739 itv
->cxhdl
.capabilities
= CX2341X_CAP_HAS_SLICED_VBI
;
740 init_waitqueue_head(&itv
->eos_waitq
);
741 init_waitqueue_head(&itv
->event_waitq
);
742 init_waitqueue_head(&itv
->vsync_waitq
);
743 init_waitqueue_head(&itv
->dma_waitq
);
744 init_timer(&itv
->dma_timer
);
745 itv
->dma_timer
.function
= ivtv_unfinished_dma
;
746 itv
->dma_timer
.data
= (unsigned long)itv
;
748 itv
->cur_dma_stream
= -1;
749 itv
->cur_pio_stream
= -1;
750 itv
->audio_stereo_mode
= AUDIO_STEREO
;
751 itv
->audio_bilingual_mode
= AUDIO_MONO_LEFT
;
757 itv
->vbi
.in
.type
= V4L2_BUF_TYPE_VBI_CAPTURE
;
758 itv
->vbi
.sliced_in
= &itv
->vbi
.in
.fmt
.sliced
;
760 /* Init the sg table for osd/yuv output */
761 sg_init_table(itv
->udma
.SGlist
, IVTV_DMA_SG_OSD_ENT
);
764 itv
->osd_global_alpha_state
= 1;
765 itv
->osd_global_alpha
= 255;
768 atomic_set(&itv
->yuv_info
.next_dma_frame
, -1);
769 itv
->yuv_info
.lace_mode
= ivtv_yuv_mode
;
770 itv
->yuv_info
.lace_threshold
= ivtv_yuv_threshold
;
771 itv
->yuv_info
.max_frames_buffered
= 3;
772 itv
->yuv_info
.track_osd
= 1;
776 /* Second initialization part. Here the card type has been
778 static void __devinit
ivtv_init_struct2(struct ivtv
*itv
)
782 for (i
= 0; i
< IVTV_CARD_MAX_VIDEO_INPUTS
; i
++)
783 if (itv
->card
->video_inputs
[i
].video_type
== 0)
786 for (i
= 0; i
< IVTV_CARD_MAX_AUDIO_INPUTS
; i
++)
787 if (itv
->card
->audio_inputs
[i
].audio_type
== 0)
789 itv
->nof_audio_inputs
= i
;
791 if (itv
->card
->hw_all
& IVTV_HW_CX25840
) {
792 itv
->vbi
.sliced_size
= 288; /* multiple of 16, real size = 284 */
794 itv
->vbi
.sliced_size
= 64; /* multiple of 16, real size = 52 */
797 /* Find tuner input */
798 for (i
= 0; i
< itv
->nof_inputs
; i
++) {
799 if (itv
->card
->video_inputs
[i
].video_type
==
800 IVTV_CARD_INPUT_VID_TUNER
)
803 if (i
== itv
->nof_inputs
)
805 itv
->active_input
= i
;
806 itv
->audio_input
= itv
->card
->video_inputs
[i
].audio_index
;
809 static int ivtv_setup_pci(struct ivtv
*itv
, struct pci_dev
*pdev
,
810 const struct pci_device_id
*pci_id
)
814 unsigned char pci_latency
;
816 IVTV_DEBUG_INFO("Enabling pci device\n");
818 if (pci_enable_device(pdev
)) {
819 IVTV_ERR("Can't enable device!\n");
822 if (pci_set_dma_mask(pdev
, 0xffffffff)) {
823 IVTV_ERR("No suitable DMA available.\n");
826 if (!request_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
, "ivtv encoder")) {
827 IVTV_ERR("Cannot request encoder memory region.\n");
831 if (!request_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
,
832 IVTV_REG_SIZE
, "ivtv registers")) {
833 IVTV_ERR("Cannot request register memory region.\n");
834 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
838 if (itv
->has_cx23415
&&
839 !request_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
840 IVTV_DECODER_SIZE
, "ivtv decoder")) {
841 IVTV_ERR("Cannot request decoder memory region.\n");
842 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
843 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
847 /* Check for bus mastering */
848 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
849 if (!(cmd
& PCI_COMMAND_MASTER
)) {
850 IVTV_DEBUG_INFO("Attempting to enable Bus Mastering\n");
851 pci_set_master(pdev
);
852 pci_read_config_word(pdev
, PCI_COMMAND
, &cmd
);
853 if (!(cmd
& PCI_COMMAND_MASTER
)) {
854 IVTV_ERR("Bus Mastering is not enabled\n");
858 IVTV_DEBUG_INFO("Bus Mastering Enabled.\n");
860 pci_read_config_byte(pdev
, PCI_CLASS_REVISION
, &card_rev
);
861 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
863 if (pci_latency
< 64 && ivtv_pci_latency
) {
864 IVTV_INFO("Unreasonably low latency timer, "
865 "setting to 64 (was %d)\n", pci_latency
);
866 pci_write_config_byte(pdev
, PCI_LATENCY_TIMER
, 64);
867 pci_read_config_byte(pdev
, PCI_LATENCY_TIMER
, &pci_latency
);
869 /* This config space value relates to DMA latencies. The
870 default value 0x8080 is too low however and will lead
871 to DMA errors. 0xffff is the max value which solves
873 pci_write_config_dword(pdev
, 0x40, 0xffff);
875 IVTV_DEBUG_INFO("%d (rev %d) at %02x:%02x.%x, "
876 "irq: %d, latency: %d, memory: 0x%lx\n",
877 pdev
->device
, card_rev
, pdev
->bus
->number
,
878 PCI_SLOT(pdev
->devfn
), PCI_FUNC(pdev
->devfn
),
879 pdev
->irq
, pci_latency
, (unsigned long)itv
->base_addr
);
884 static void ivtv_load_and_init_modules(struct ivtv
*itv
)
886 u32 hw
= itv
->card
->hw_all
;
889 /* check which i2c devices are actually found */
890 for (i
= 0; i
< 32; i
++) {
895 if (device
== IVTV_HW_GPIO
|| device
== IVTV_HW_TVEEPROM
) {
896 /* GPIO and TVEEPROM do not use i2c probing */
897 itv
->hw_flags
|= device
;
900 if (ivtv_i2c_register(itv
, i
) == 0)
901 itv
->hw_flags
|= device
;
904 /* probe for legacy IR controllers that aren't in card definitions */
905 if ((itv
->hw_flags
& IVTV_HW_IR_ANY
) == 0)
906 ivtv_i2c_new_ir_legacy(itv
);
908 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
909 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_CX25840
);
910 else if (itv
->card
->hw_all
& IVTV_HW_SAA717X
)
911 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA717X
);
912 else if (itv
->card
->hw_all
& IVTV_HW_SAA7114
)
913 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7114
);
915 itv
->sd_video
= ivtv_find_hw(itv
, IVTV_HW_SAA7115
);
916 itv
->sd_audio
= ivtv_find_hw(itv
, itv
->card
->hw_audio_ctrl
);
917 itv
->sd_muxer
= ivtv_find_hw(itv
, itv
->card
->hw_muxer
);
921 if (itv
->card
->type
== IVTV_CARD_CX23416GYC
) {
922 /* Several variations of this card exist, detect which card
923 type should be used. */
924 if ((hw
& (IVTV_HW_UPD64031A
| IVTV_HW_UPD6408X
)) == 0)
925 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGRYCS
);
926 else if ((hw
& IVTV_HW_UPD64031A
) == 0)
927 itv
->card
= ivtv_get_card(IVTV_CARD_CX23416GYC_NOGR
);
929 else if (itv
->card
->type
== IVTV_CARD_GV_MVPRX
||
930 itv
->card
->type
== IVTV_CARD_GV_MVPRX2E
) {
931 /* The crystal frequency of GVMVPRX is 24.576MHz */
932 v4l2_subdev_call(itv
->sd_video
, video
, s_crystal_freq
,
933 SAA7115_FREQ_24_576_MHZ
, SAA7115_FREQ_FL_UCGC
);
936 if (hw
& IVTV_HW_CX25840
) {
937 itv
->vbi
.raw_decoder_line_size
= 1444;
938 itv
->vbi
.raw_decoder_sav_odd_field
= 0x20;
939 itv
->vbi
.raw_decoder_sav_even_field
= 0x60;
940 itv
->vbi
.sliced_decoder_line_size
= 272;
941 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xB0;
942 itv
->vbi
.sliced_decoder_sav_even_field
= 0xF0;
945 if (hw
& IVTV_HW_SAA711X
) {
946 struct v4l2_dbg_chip_ident v
;
948 /* determine the exact saa711x model */
949 itv
->hw_flags
&= ~IVTV_HW_SAA711X
;
951 v
.match
.type
= V4L2_CHIP_MATCH_I2C_DRIVER
;
952 strlcpy(v
.match
.name
, "saa7115", sizeof(v
.match
.name
));
953 ivtv_call_hw(itv
, IVTV_HW_SAA711X
, core
, g_chip_ident
, &v
);
954 if (v
.ident
== V4L2_IDENT_SAA7114
) {
955 itv
->hw_flags
|= IVTV_HW_SAA7114
;
956 /* VBI is not yet supported by the saa7114 driver. */
957 itv
->v4l2_cap
&= ~(V4L2_CAP_SLICED_VBI_CAPTURE
|V4L2_CAP_VBI_CAPTURE
);
959 itv
->hw_flags
|= IVTV_HW_SAA7115
;
961 itv
->vbi
.raw_decoder_line_size
= 1443;
962 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
963 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
964 itv
->vbi
.sliced_decoder_line_size
= 51;
965 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
966 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
969 if (hw
& IVTV_HW_SAA717X
) {
970 itv
->vbi
.raw_decoder_line_size
= 1443;
971 itv
->vbi
.raw_decoder_sav_odd_field
= 0x25;
972 itv
->vbi
.raw_decoder_sav_even_field
= 0x62;
973 itv
->vbi
.sliced_decoder_line_size
= 51;
974 itv
->vbi
.sliced_decoder_sav_odd_field
= 0xAB;
975 itv
->vbi
.sliced_decoder_sav_even_field
= 0xEC;
979 static int __devinit
ivtv_probe(struct pci_dev
*pdev
,
980 const struct pci_device_id
*pci_id
)
986 itv
= kzalloc(sizeof(struct ivtv
), GFP_ATOMIC
);
990 itv
->instance
= v4l2_device_set_name(&itv
->v4l2_dev
, "ivtv",
993 retval
= v4l2_device_register(&pdev
->dev
, &itv
->v4l2_dev
);
998 IVTV_INFO("Initializing card %d\n", itv
->instance
);
1000 ivtv_process_options(itv
);
1001 if (itv
->options
.cardtype
== -1) {
1005 if (ivtv_init_struct1(itv
)) {
1009 retval
= cx2341x_handler_init(&itv
->cxhdl
, 50);
1012 itv
->v4l2_dev
.ctrl_handler
= &itv
->cxhdl
.hdl
;
1013 itv
->cxhdl
.ops
= &ivtv_cxhdl_ops
;
1014 itv
->cxhdl
.priv
= itv
;
1015 itv
->cxhdl
.func
= ivtv_api_func
;
1017 IVTV_DEBUG_INFO("base addr: 0x%08x\n", itv
->base_addr
);
1019 /* PCI Device Setup */
1020 retval
= ivtv_setup_pci(itv
, pdev
, pci_id
);
1023 if (retval
== -ENXIO
)
1027 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1028 itv
->base_addr
+ IVTV_ENCODER_OFFSET
, IVTV_ENCODER_SIZE
);
1029 itv
->enc_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_ENCODER_OFFSET
,
1031 if (!itv
->enc_mem
) {
1032 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
1033 "encoder memory\n");
1034 IVTV_ERR("Each capture card with a CX23415/6 needs 8 MB of "
1035 "vmalloc address space for this window\n");
1036 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1037 IVTV_ERR("Use the vmalloc= kernel command line option to set "
1038 "VmallocTotal to a larger value\n");
1043 if (itv
->has_cx23415
) {
1044 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1045 itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1046 itv
->dec_mem
= ioremap_nocache(itv
->base_addr
+ IVTV_DECODER_OFFSET
,
1048 if (!itv
->dec_mem
) {
1049 IVTV_ERR("ioremap failed. Can't get a window into "
1050 "CX23415 decoder memory\n");
1051 IVTV_ERR("Each capture card with a CX23415 needs 8 MB "
1052 "of vmalloc address space for this window\n");
1053 IVTV_ERR("Check the output of 'grep Vmalloc "
1054 "/proc/meminfo'\n");
1055 IVTV_ERR("Use the vmalloc= kernel command line option "
1056 "to set VmallocTotal to a larger value\n");
1062 itv
->dec_mem
= itv
->enc_mem
;
1065 /* map registers memory */
1066 IVTV_DEBUG_INFO("attempting ioremap at 0x%08x len 0x%08x\n",
1067 itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1069 ioremap_nocache(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1070 if (!itv
->reg_mem
) {
1071 IVTV_ERR("ioremap failed. Can't get a window into CX23415/6 "
1072 "register space\n");
1073 IVTV_ERR("Each capture card with a CX23415/6 needs 64 kB of "
1074 "vmalloc address space for this window\n");
1075 IVTV_ERR("Check the output of 'grep Vmalloc /proc/meminfo'\n");
1076 IVTV_ERR("Use the vmalloc= kernel command line option to set "
1077 "VmallocTotal to a larger value\n");
1082 retval
= ivtv_gpio_init(itv
);
1087 IVTV_DEBUG_INFO("activating i2c...\n");
1088 if (init_ivtv_i2c(itv
)) {
1089 IVTV_ERR("Could not initialize i2c\n");
1093 if (itv
->card
->hw_all
& IVTV_HW_TVEEPROM
) {
1094 /* Based on the model number the cardtype may be changed.
1095 The PCI IDs are not always reliable. */
1096 ivtv_process_eeprom(itv
);
1098 if (itv
->card
->comment
)
1099 IVTV_INFO("%s", itv
->card
->comment
);
1100 if (itv
->card
->v4l2_capabilities
== 0) {
1101 /* card was detected but is not supported */
1106 if (itv
->std
== 0) {
1107 itv
->std
= V4L2_STD_NTSC_M
;
1110 if (itv
->options
.tuner
== -1) {
1113 for (i
= 0; i
< IVTV_CARD_MAX_TUNERS
; i
++) {
1114 if ((itv
->std
& itv
->card
->tuners
[i
].std
) == 0)
1116 itv
->options
.tuner
= itv
->card
->tuners
[i
].tuner
;
1120 /* if no tuner was found, then pick the first tuner in the card list */
1121 if (itv
->options
.tuner
== -1 && itv
->card
->tuners
[0].std
) {
1122 itv
->std
= itv
->card
->tuners
[0].std
;
1123 if (itv
->std
& V4L2_STD_PAL
)
1124 itv
->std
= V4L2_STD_PAL_BG
| V4L2_STD_PAL_H
;
1125 else if (itv
->std
& V4L2_STD_NTSC
)
1126 itv
->std
= V4L2_STD_NTSC_M
;
1127 else if (itv
->std
& V4L2_STD_SECAM
)
1128 itv
->std
= V4L2_STD_SECAM_L
;
1129 itv
->options
.tuner
= itv
->card
->tuners
[0].tuner
;
1131 if (itv
->options
.radio
== -1)
1132 itv
->options
.radio
= (itv
->card
->radio_input
.audio_type
!= 0);
1134 /* The card is now fully identified, continue with card-specific
1136 ivtv_init_struct2(itv
);
1138 ivtv_load_and_init_modules(itv
);
1140 if (itv
->std
& V4L2_STD_525_60
) {
1142 itv
->is_out_60hz
= 1;
1145 itv
->is_out_50hz
= 1;
1148 itv
->yuv_info
.osd_full_w
= 720;
1149 itv
->yuv_info
.osd_full_h
= itv
->is_out_50hz
? 576 : 480;
1150 itv
->yuv_info
.v4l2_src_w
= itv
->yuv_info
.osd_full_w
;
1151 itv
->yuv_info
.v4l2_src_h
= itv
->yuv_info
.osd_full_h
;
1153 cx2341x_handler_set_50hz(&itv
->cxhdl
, itv
->is_50hz
);
1155 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_MPG
] = 0x08000;
1156 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_PCM
] = 0x01200;
1157 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_MPG
] = 0x10000;
1158 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_YUV
] = 0x10000;
1159 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_YUV
] = 0x08000;
1161 /* Setup VBI Raw Size. Should be big enough to hold PAL.
1162 It is possible to switch between PAL and NTSC, so we need to
1163 take the largest size here. */
1164 /* 1456 is multiple of 16, real size = 1444 */
1165 itv
->vbi
.raw_size
= 1456;
1166 /* We use a buffer size of 1/2 of the total size needed for a
1167 frame. This is actually very useful, since we now receive
1168 a field at a time and that makes 'compressing' the raw data
1169 down to size by stripping off the SAV codes a lot easier.
1170 Note: having two different buffer sizes prevents standard
1171 switching on the fly. We need to find a better solution... */
1172 vbi_buf_size
= itv
->vbi
.raw_size
* (itv
->is_60hz
? 24 : 36) / 2;
1173 itv
->stream_buf_size
[IVTV_ENC_STREAM_TYPE_VBI
] = vbi_buf_size
;
1174 itv
->stream_buf_size
[IVTV_DEC_STREAM_TYPE_VBI
] = sizeof(struct v4l2_sliced_vbi_data
) * 36;
1176 if (itv
->options
.radio
> 0)
1177 itv
->v4l2_cap
|= V4L2_CAP_RADIO
;
1179 if (itv
->options
.tuner
> -1) {
1180 struct tuner_setup setup
;
1182 setup
.addr
= ADDR_UNSET
;
1183 setup
.type
= itv
->options
.tuner
;
1184 setup
.mode_mask
= T_ANALOG_TV
; /* matches TV tuners */
1185 setup
.tuner_callback
= (setup
.type
== TUNER_XC2028
) ?
1186 ivtv_reset_tuner_gpio
: NULL
;
1187 ivtv_call_all(itv
, tuner
, s_type_addr
, &setup
);
1188 if (setup
.type
== TUNER_XC2028
) {
1189 static struct xc2028_ctrl ctrl
= {
1190 .fname
= XC2028_DEFAULT_FIRMWARE
,
1193 struct v4l2_priv_tun_config cfg
= {
1194 .tuner
= itv
->options
.tuner
,
1197 ivtv_call_all(itv
, tuner
, s_config
, &cfg
);
1201 /* The tuner is fixed to the standard. The other inputs (e.g. S-Video)
1203 itv
->tuner_std
= itv
->std
;
1205 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1206 ivtv_call_all(itv
, video
, s_std_output
, itv
->std
);
1207 /* Turn off the output signal. The mpeg decoder is not yet
1208 active so without this you would get a green image until the
1209 mpeg decoder becomes active. */
1210 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1213 /* clear interrupt mask, effectively disabling interrupts */
1214 ivtv_set_irq_mask(itv
, 0xffffffff);
1217 retval
= request_irq(itv
->pdev
->irq
, ivtv_irq_handler
,
1218 IRQF_SHARED
| IRQF_DISABLED
, itv
->v4l2_dev
.name
, (void *)itv
);
1220 IVTV_ERR("Failed to register irq %d\n", retval
);
1224 retval
= ivtv_streams_setup(itv
);
1226 IVTV_ERR("Error %d setting up streams\n", retval
);
1229 retval
= ivtv_streams_register(itv
);
1231 IVTV_ERR("Error %d registering devices\n", retval
);
1234 IVTV_INFO("Initialized card: %s\n", itv
->card_name
);
1238 ivtv_streams_cleanup(itv
, 1);
1240 free_irq(itv
->pdev
->irq
, (void *)itv
);
1246 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1247 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1248 if (itv
->has_cx23415
)
1249 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1251 kthread_stop(itv
->irq_worker_task
);
1255 IVTV_ERR("Error %d on initialization\n", retval
);
1257 v4l2_device_unregister(&itv
->v4l2_dev
);
1262 int ivtv_init_on_first_open(struct ivtv
*itv
)
1264 struct v4l2_frequency vf
;
1265 /* Needed to call ioctls later */
1266 struct ivtv_open_id fh
;
1267 int fw_retry_count
= 3;
1272 if (test_bit(IVTV_F_I_FAILED
, &itv
->i_flags
))
1275 if (test_and_set_bit(IVTV_F_I_INITED
, &itv
->i_flags
))
1278 while (--fw_retry_count
> 0) {
1280 if (ivtv_firmware_init(itv
) == 0)
1282 if (fw_retry_count
> 1)
1283 IVTV_WARN("Retry loading firmware\n");
1286 if (fw_retry_count
== 0) {
1287 set_bit(IVTV_F_I_FAILED
, &itv
->i_flags
);
1291 /* Try and get firmware versions */
1292 IVTV_DEBUG_INFO("Getting firmware version..\n");
1293 ivtv_firmware_versions(itv
);
1295 if (itv
->card
->hw_all
& IVTV_HW_CX25840
)
1296 v4l2_subdev_call(itv
->sd_video
, core
, load_fw
);
1299 vf
.type
= V4L2_TUNER_ANALOG_TV
;
1300 vf
.frequency
= 6400; /* the tuner 'baseline' frequency */
1302 /* Set initial frequency. For PAL/SECAM broadcasts no
1303 'default' channel exists AFAIK. */
1304 if (itv
->std
== V4L2_STD_NTSC_M_JP
) {
1305 vf
.frequency
= 1460; /* ch. 1 91250*16/1000 */
1307 else if (itv
->std
& V4L2_STD_NTSC_M
) {
1308 vf
.frequency
= 1076; /* ch. 4 67250*16/1000 */
1311 video_input
= itv
->active_input
;
1312 itv
->active_input
++; /* Force update of input */
1313 ivtv_s_input(NULL
, &fh
, video_input
);
1315 /* Let the VIDIOC_S_STD ioctl do all the work, keeps the code
1317 itv
->std
++; /* Force full standard initialization */
1318 itv
->std_out
= itv
->std
;
1319 ivtv_s_frequency(NULL
, &fh
, &vf
);
1321 if (itv
->card
->v4l2_capabilities
& V4L2_CAP_VIDEO_OUTPUT
) {
1322 /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes
1323 the mpeg decoder so now the saa7127 receives a proper
1325 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 1);
1326 ivtv_init_mpeg_decoder(itv
);
1329 /* On a cx23416 this seems to be able to enable DMA to the chip? */
1330 if (!itv
->has_cx23415
)
1331 write_reg_sync(0x03, IVTV_REG_DMACONTROL
);
1333 /* Default interrupts enabled. For the PVR350 this includes the
1334 decoder VSYNC interrupt, which is always on. It is not only used
1335 during decoding but also by the OSD.
1336 Some old PVR250 cards had a cx23415, so testing for that is too
1337 general. Instead test if the card has video output capability. */
1338 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
) {
1339 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
| IVTV_IRQ_DEC_VSYNC
);
1340 ivtv_set_osd_alpha(itv
);
1343 ivtv_clear_irq_mask(itv
, IVTV_IRQ_MASK_INIT
);
1345 /* For cards with video out, this call needs interrupts enabled */
1346 ivtv_s_std(NULL
, &fh
, &itv
->tuner_std
);
1348 /* Setup initial controls */
1349 cx2341x_handler_setup(&itv
->cxhdl
);
1353 static void ivtv_remove(struct pci_dev
*pdev
)
1355 struct v4l2_device
*v4l2_dev
= dev_get_drvdata(&pdev
->dev
);
1356 struct ivtv
*itv
= to_ivtv(v4l2_dev
);
1359 IVTV_DEBUG_INFO("Removing card\n");
1361 if (test_bit(IVTV_F_I_INITED
, &itv
->i_flags
)) {
1362 /* Stop all captures */
1363 IVTV_DEBUG_INFO("Stopping all streams\n");
1364 if (atomic_read(&itv
->capturing
) > 0)
1365 ivtv_stop_all_captures(itv
);
1367 /* Stop all decoding */
1368 IVTV_DEBUG_INFO("Stopping decoding\n");
1370 /* Turn off the TV-out */
1371 if (itv
->v4l2_cap
& V4L2_CAP_VIDEO_OUTPUT
)
1372 ivtv_call_hw(itv
, IVTV_HW_SAA7127
, video
, s_stream
, 0);
1373 if (atomic_read(&itv
->decoding
) > 0) {
1376 if (test_bit(IVTV_F_I_DEC_YUV
, &itv
->i_flags
))
1377 type
= IVTV_DEC_STREAM_TYPE_YUV
;
1379 type
= IVTV_DEC_STREAM_TYPE_MPG
;
1380 ivtv_stop_v4l2_decode_stream(&itv
->streams
[type
],
1381 VIDEO_CMD_STOP_TO_BLACK
| VIDEO_CMD_STOP_IMMEDIATELY
, 0);
1383 ivtv_halt_firmware(itv
);
1387 ivtv_set_irq_mask(itv
, 0xffffffff);
1388 del_timer_sync(&itv
->dma_timer
);
1390 /* Kill irq worker */
1391 flush_kthread_worker(&itv
->irq_worker
);
1392 kthread_stop(itv
->irq_worker_task
);
1394 ivtv_streams_cleanup(itv
, 1);
1395 ivtv_udma_free(itv
);
1399 free_irq(itv
->pdev
->irq
, (void *)itv
);
1402 release_mem_region(itv
->base_addr
, IVTV_ENCODER_SIZE
);
1403 release_mem_region(itv
->base_addr
+ IVTV_REG_OFFSET
, IVTV_REG_SIZE
);
1404 if (itv
->has_cx23415
)
1405 release_mem_region(itv
->base_addr
+ IVTV_DECODER_OFFSET
, IVTV_DECODER_SIZE
);
1407 pci_disable_device(itv
->pdev
);
1408 for (i
= 0; i
< IVTV_VBI_FRAMES
; i
++)
1409 kfree(itv
->vbi
.sliced_mpeg_data
[i
]);
1411 printk(KERN_INFO
"ivtv: Removed %s\n", itv
->card_name
);
1413 v4l2_device_unregister(&itv
->v4l2_dev
);
1417 /* define a pci_driver for card detection */
1418 static struct pci_driver ivtv_pci_driver
= {
1420 .id_table
= ivtv_pci_tbl
,
1421 .probe
= ivtv_probe
,
1422 .remove
= ivtv_remove
,
1425 static int __init
module_start(void)
1427 printk(KERN_INFO
"ivtv: Start initialization, version %s\n", IVTV_VERSION
);
1429 /* Validate parameters */
1430 if (ivtv_first_minor
< 0 || ivtv_first_minor
>= IVTV_MAX_CARDS
) {
1431 printk(KERN_ERR
"ivtv: Exiting, ivtv_first_minor must be between 0 and %d\n",
1432 IVTV_MAX_CARDS
- 1);
1436 if (ivtv_debug
< 0 || ivtv_debug
> 2047) {
1438 printk(KERN_INFO
"ivtv: Debug value must be >= 0 and <= 2047\n");
1441 if (pci_register_driver(&ivtv_pci_driver
)) {
1442 printk(KERN_ERR
"ivtv: Error detecting PCI card\n");
1445 printk(KERN_INFO
"ivtv: End initialization\n");
1449 static void __exit
module_cleanup(void)
1451 pci_unregister_driver(&ivtv_pci_driver
);
1454 /* Note: These symbols are exported because they are used by the ivtvfb
1455 framebuffer module and an infrared module for the IR-blaster. */
1456 EXPORT_SYMBOL(ivtv_set_irq_mask
);
1457 EXPORT_SYMBOL(ivtv_api
);
1458 EXPORT_SYMBOL(ivtv_vapi
);
1459 EXPORT_SYMBOL(ivtv_vapi_result
);
1460 EXPORT_SYMBOL(ivtv_clear_irq_mask
);
1461 EXPORT_SYMBOL(ivtv_debug
);
1462 #ifdef CONFIG_VIDEO_ADV_DEBUG
1463 EXPORT_SYMBOL(ivtv_fw_debug
);
1465 EXPORT_SYMBOL(ivtv_reset_ir_gpio
);
1466 EXPORT_SYMBOL(ivtv_udma_setup
);
1467 EXPORT_SYMBOL(ivtv_udma_unmap
);
1468 EXPORT_SYMBOL(ivtv_udma_alloc
);
1469 EXPORT_SYMBOL(ivtv_udma_prepare
);
1470 EXPORT_SYMBOL(ivtv_init_on_first_open
);
1471 EXPORT_SYMBOL(ivtv_firmware_check
);
1473 module_init(module_start
);
1474 module_exit(module_cleanup
);