drivers/net/bnx2x/bnx2x_reg.h

   1 /* bnx2x_reg.h: Broadcom Everest network driver.
   2  *
   3  * Copyright (c) 2007-2011 Broadcom Corporation
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License as published by
   7  * the Free Software Foundation.
   8  *
   9  * The registers description starts with the register Access type followed
  10  * by size in bits. For example [RW 32]. The access types are:
  11  * R  - Read only
  12  * RC - Clear on read
  13  * RW - Read/Write
  14  * ST - Statistics register (clear on read)
  15  * W  - Write only
  16  * WB - Wide bus register - the size is over 32 bits and it should be
  17  *      read/write in consecutive 32 bits accesses
  18  * WR - Write Clear (write 1 to clear the bit)
  19  *
  20  */
  21 #ifndef BNX2X_REG_H
  22 #define BNX2X_REG_H
  23
  24 #define ATC_ATC_INT_STS_REG_ADDRESS_ERROR                        (0x1<<0)
  25 #define ATC_ATC_INT_STS_REG_ATC_GPA_MULTIPLE_HITS                (0x1<<2)
  26 #define ATC_ATC_INT_STS_REG_ATC_IREQ_LESS_THAN_STU               (0x1<<5)
  27 #define ATC_ATC_INT_STS_REG_ATC_RCPL_TO_EMPTY_CNT                (0x1<<3)
  28 #define ATC_ATC_INT_STS_REG_ATC_TCPL_ERROR                       (0x1<<4)
  29 #define ATC_ATC_INT_STS_REG_ATC_TCPL_TO_NOT_PEND                 (0x1<<1)
  30 /* [RW 1] Initiate the ATC array - reset all the valid bits */
  31 #define ATC_REG_ATC_INIT_ARRAY                                   0x1100b8
  32 /* [R 1] ATC initalization done */
  33 #define ATC_REG_ATC_INIT_DONE                                    0x1100bc
  34 /* [RC 6] Interrupt register #0 read clear */
  35 #define ATC_REG_ATC_INT_STS_CLR                          0x1101c0
  36 /* [RW 19] Interrupt mask register #0 read/write */
  37 #define BRB1_REG_BRB1_INT_MASK                                   0x60128
  38 /* [R 19] Interrupt register #0 read */
  39 #define BRB1_REG_BRB1_INT_STS                                    0x6011c
  40 /* [RW 4] Parity mask register #0 read/write */
  41 #define BRB1_REG_BRB1_PRTY_MASK                                  0x60138
  42 /* [R 4] Parity register #0 read */
  43 #define BRB1_REG_BRB1_PRTY_STS                                   0x6012c
  44 /* [RC 4] Parity register #0 read clear */
  45 #define BRB1_REG_BRB1_PRTY_STS_CLR                               0x60130
  46 /* [RW 10] At address BRB1_IND_FREE_LIST_PRS_CRDT initialize free head. At
  47  * address BRB1_IND_FREE_LIST_PRS_CRDT+1 initialize free tail. At address
  48  * BRB1_IND_FREE_LIST_PRS_CRDT+2 initialize parser initial credit. Warning -
  49  * following reset the first rbc access to this reg must be write; there can
  50  * be no more rbc writes after the first one; there can be any number of rbc
  51  * read following the first write; rbc access not following these rules will
  52  * result in hang condition. */
  53 #define BRB1_REG_FREE_LIST_PRS_CRDT                              0x60200
  54 /* [RW 10] The number of free blocks below which the full signal to class 0
  55  * is asserted */
  56 #define BRB1_REG_FULL_0_XOFF_THRESHOLD_0                         0x601d0
  57 /* [RW 10] The number of free blocks above which the full signal to class 0
  58  * is de-asserted */
  59 #define BRB1_REG_FULL_0_XON_THRESHOLD_0                          0x601d4
  60 /* [RW 10] The number of free blocks below which the full signal to class 1
  61  * is asserted */
  62 #define BRB1_REG_FULL_1_XOFF_THRESHOLD_0                         0x601d8
  63 /* [RW 10] The number of free blocks above which the full signal to class 1
  64  * is de-asserted */
  65 #define BRB1_REG_FULL_1_XON_THRESHOLD_0                          0x601dc
  66 /* [RW 10] The number of free blocks below which the full signal to the LB
  67  * port is asserted */
  68 #define BRB1_REG_FULL_LB_XOFF_THRESHOLD                          0x601e0
  69 /* [RW 10] The number of free blocks above which the full signal to the LB
  70  * port is de-asserted */
  71 #define BRB1_REG_FULL_LB_XON_THRESHOLD                           0x601e4
  72 /* [RW 10] The number of free blocks above which the High_llfc signal to
  73    interface #n is de-asserted. */
  74 #define BRB1_REG_HIGH_LLFC_HIGH_THRESHOLD_0                      0x6014c
  75 /* [RW 10] The number of free blocks below which the High_llfc signal to
  76    interface #n is asserted. */
  77 #define BRB1_REG_HIGH_LLFC_LOW_THRESHOLD_0                       0x6013c
  78 /* [RW 23] LL RAM data. */
  79 #define BRB1_REG_LL_RAM                                          0x61000
  80 /* [RW 10] The number of free blocks above which the Low_llfc signal to
  81    interface #n is de-asserted. */
  82 #define BRB1_REG_LOW_LLFC_HIGH_THRESHOLD_0                       0x6016c
  83 /* [RW 10] The number of free blocks below which the Low_llfc signal to
  84    interface #n is asserted. */
  85 #define BRB1_REG_LOW_LLFC_LOW_THRESHOLD_0                        0x6015c
  86 /* [RW 10] The number of blocks guarantied for the MAC port */
  87 #define BRB1_REG_MAC_GUARANTIED_0                                0x601e8
  88 #define BRB1_REG_MAC_GUARANTIED_1                                0x60240
  89 /* [R 24] The number of full blocks. */
  90 #define BRB1_REG_NUM_OF_FULL_BLOCKS                              0x60090
  91 /* [ST 32] The number of cycles that the write_full signal towards MAC #0
  92    was asserted. */
  93 #define BRB1_REG_NUM_OF_FULL_CYCLES_0                            0x600c8
  94 #define BRB1_REG_NUM_OF_FULL_CYCLES_1                            0x600cc
  95 #define BRB1_REG_NUM_OF_FULL_CYCLES_4                            0x600d8
  96 /* [ST 32] The number of cycles that the pause signal towards MAC #0 was
  97    asserted. */
  98 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_0                           0x600b8
  99 #define BRB1_REG_NUM_OF_PAUSE_CYCLES_1                           0x600bc
 100 /* [RW 10] The number of free blocks below which the pause signal to class 0
 101  * is asserted */
 102 #define BRB1_REG_PAUSE_0_XOFF_THRESHOLD_0                        0x601c0
 103 /* [RW 10] The number of free blocks above which the pause signal to class 0
 104  * is de-asserted */
 105 #define BRB1_REG_PAUSE_0_XON_THRESHOLD_0                         0x601c4
 106 /* [RW 10] The number of free blocks below which the pause signal to class 1
 107  * is asserted */
 108 #define BRB1_REG_PAUSE_1_XOFF_THRESHOLD_0                        0x601c8
 109 /* [RW 10] The number of free blocks above which the pause signal to class 1
 110  * is de-asserted */
 111 #define BRB1_REG_PAUSE_1_XON_THRESHOLD_0                         0x601cc
 112 /* [RW 10] Write client 0: De-assert pause threshold. Not Functional */
 113 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_0                          0x60078
 114 #define BRB1_REG_PAUSE_HIGH_THRESHOLD_1                          0x6007c
 115 /* [RW 10] Write client 0: Assert pause threshold. */
 116 #define BRB1_REG_PAUSE_LOW_THRESHOLD_0                           0x60068
 117 #define BRB1_REG_PAUSE_LOW_THRESHOLD_1                           0x6006c
 118 /* [R 24] The number of full blocks occupied by port. */
 119 #define BRB1_REG_PORT_NUM_OCC_BLOCKS_0                           0x60094
 120 /* [RW 1] Reset the design by software. */
 121 #define BRB1_REG_SOFT_RESET                                      0x600dc
 122 /* [R 5] Used to read the value of the XX protection CAM occupancy counter. */
 123 #define CCM_REG_CAM_OCCUP                                        0xd0188
 124 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
 125    acknowledge output is deasserted; all other signals are treated as usual;
 126    if 1 - normal activity. */
 127 #define CCM_REG_CCM_CFC_IFEN                                     0xd003c
 128 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
 129    disregarded; valid is deasserted; all other signals are treated as usual;
 130    if 1 - normal activity. */
 131 #define CCM_REG_CCM_CQM_IFEN                                     0xd000c
 132 /* [RW 1] If set the Q index; received from the QM is inserted to event ID.
 133    Otherwise 0 is inserted. */
 134 #define CCM_REG_CCM_CQM_USE_Q                                    0xd00c0
 135 /* [RW 11] Interrupt mask register #0 read/write */
 136 #define CCM_REG_CCM_INT_MASK                                     0xd01e4
 137 /* [R 11] Interrupt register #0 read */
 138 #define CCM_REG_CCM_INT_STS                                      0xd01d8
 139 /* [RW 27] Parity mask register #0 read/write */
 140 #define CCM_REG_CCM_PRTY_MASK                                    0xd01f4
 141 /* [R 27] Parity register #0 read */
 142 #define CCM_REG_CCM_PRTY_STS                                     0xd01e8
 143 /* [RC 27] Parity register #0 read clear */
 144 #define CCM_REG_CCM_PRTY_STS_CLR                                 0xd01ec
 145 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
 146    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
 147    Is used to determine the number of the AG context REG-pairs written back;
 148    when the input message Reg1WbFlg isn't set. */
 149 #define CCM_REG_CCM_REG0_SZ                                      0xd00c4
 150 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
 151    disregarded; valid is deasserted; all other signals are treated as usual;
 152    if 1 - normal activity. */
 153 #define CCM_REG_CCM_STORM0_IFEN                                  0xd0004
 154 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
 155    disregarded; valid is deasserted; all other signals are treated as usual;
 156    if 1 - normal activity. */
 157 #define CCM_REG_CCM_STORM1_IFEN                                  0xd0008
 158 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
 159    disregarded; valid output is deasserted; all other signals are treated as
 160    usual; if 1 - normal activity. */
 161 #define CCM_REG_CDU_AG_RD_IFEN                                   0xd0030
 162 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
 163    are disregarded; all other signals are treated as usual; if 1 - normal
 164    activity. */
 165 #define CCM_REG_CDU_AG_WR_IFEN                                   0xd002c
 166 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
 167    disregarded; valid output is deasserted; all other signals are treated as
 168    usual; if 1 - normal activity. */
 169 #define CCM_REG_CDU_SM_RD_IFEN                                   0xd0038
 170 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
 171    input is disregarded; all other signals are treated as usual; if 1 -
 172    normal activity. */
 173 #define CCM_REG_CDU_SM_WR_IFEN                                   0xd0034
 174 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
 175    the initial credit value; read returns the current value of the credit
 176    counter. Must be initialized to 1 at start-up. */
 177 #define CCM_REG_CFC_INIT_CRD                                     0xd0204
 178 /* [RW 2] Auxiliary counter flag Q number 1. */
 179 #define CCM_REG_CNT_AUX1_Q                                       0xd00c8
 180 /* [RW 2] Auxiliary counter flag Q number 2. */
 181 #define CCM_REG_CNT_AUX2_Q                                       0xd00cc
 182 /* [RW 28] The CM header value for QM request (primary). */
 183 #define CCM_REG_CQM_CCM_HDR_P                                    0xd008c
 184 /* [RW 28] The CM header value for QM request (secondary). */
 185 #define CCM_REG_CQM_CCM_HDR_S                                    0xd0090
 186 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
 187    acknowledge output is deasserted; all other signals are treated as usual;
 188    if 1 - normal activity. */
 189 #define CCM_REG_CQM_CCM_IFEN                                     0xd0014
 190 /* [RW 6] QM output initial credit. Max credit available - 32. Write writes
 191    the initial credit value; read returns the current value of the credit
 192    counter. Must be initialized to 32 at start-up. */
 193 #define CCM_REG_CQM_INIT_CRD                                     0xd020c
 194 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
 195    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
 196    prioritised); 2 stands for weight 2; tc. */
 197 #define CCM_REG_CQM_P_WEIGHT                                     0xd00b8
 198 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
 199    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
 200    prioritised); 2 stands for weight 2; tc. */
 201 #define CCM_REG_CQM_S_WEIGHT                                     0xd00bc
 202 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
 203    acknowledge output is deasserted; all other signals are treated as usual;
 204    if 1 - normal activity. */
 205 #define CCM_REG_CSDM_IFEN                                        0xd0018
 206 /* [RC 1] Set when the message length mismatch (relative to last indication)
 207    at the SDM interface is detected. */
 208 #define CCM_REG_CSDM_LENGTH_MIS                                  0xd0170
 209 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
 210    weight 8 (the most prioritised); 1 stands for weight 1(least
 211    prioritised); 2 stands for weight 2; tc. */
 212 #define CCM_REG_CSDM_WEIGHT                                      0xd00b4
 213 /* [RW 28] The CM header for QM formatting in case of an error in the QM
 214    inputs. */
 215 #define CCM_REG_ERR_CCM_HDR                                      0xd0094
 216 /* [RW 8] The Event ID in case the input message ErrorFlg is set. */
 217 #define CCM_REG_ERR_EVNT_ID                                      0xd0098
 218 /* [RW 8] FIC0 output initial credit. Max credit available - 255. Write
 219    writes the initial credit value; read returns the current value of the
 220    credit counter. Must be initialized to 64 at start-up. */
 221 #define CCM_REG_FIC0_INIT_CRD                                    0xd0210
 222 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
 223    writes the initial credit value; read returns the current value of the
 224    credit counter. Must be initialized to 64 at start-up. */
 225 #define CCM_REG_FIC1_INIT_CRD                                    0xd0214
 226 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
 227    - strict priority defined by ~ccm_registers_gr_ag_pr.gr_ag_pr;
 228    ~ccm_registers_gr_ld0_pr.gr_ld0_pr and
 229    ~ccm_registers_gr_ld1_pr.gr_ld1_pr. Groups are according to channels and
 230    outputs to STORM: aggregation; load FIC0; load FIC1 and store. */
 231 #define CCM_REG_GR_ARB_TYPE                                      0xd015c
 232 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
 233    highest priority is 3. It is supposed; that the Store channel priority is
 234    the compliment to 4 of the rest priorities - Aggregation channel; Load
 235    (FIC0) channel and Load (FIC1). */
 236 #define CCM_REG_GR_LD0_PR                                        0xd0164
 237 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
 238    highest priority is 3. It is supposed; that the Store channel priority is
 239    the compliment to 4 of the rest priorities - Aggregation channel; Load
 240    (FIC0) channel and Load (FIC1). */
 241 #define CCM_REG_GR_LD1_PR                                        0xd0168
 242 /* [RW 2] General flags index. */
 243 #define CCM_REG_INV_DONE_Q                                       0xd0108
 244 /* [RW 4] The number of double REG-pairs(128 bits); loaded from the STORM
 245    context and sent to STORM; for a specific connection type. The double
 246    REG-pairs are used in order to align to STORM context row size of 128
 247    bits. The offset of these data in the STORM context is always 0. Index
 248    _(0..15) stands for the connection type (one of 16). */
 249 #define CCM_REG_N_SM_CTX_LD_0                                    0xd004c
 250 #define CCM_REG_N_SM_CTX_LD_1                                    0xd0050
 251 #define CCM_REG_N_SM_CTX_LD_2                                    0xd0054
 252 #define CCM_REG_N_SM_CTX_LD_3                                    0xd0058
 253 #define CCM_REG_N_SM_CTX_LD_4                                    0xd005c
 254 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
 255    acknowledge output is deasserted; all other signals are treated as usual;
 256    if 1 - normal activity. */
 257 #define CCM_REG_PBF_IFEN                                         0xd0028
 258 /* [RC 1] Set when the message length mismatch (relative to last indication)
 259    at the pbf interface is detected. */
 260 #define CCM_REG_PBF_LENGTH_MIS                                   0xd0180
 261 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
 262    weight 8 (the most prioritised); 1 stands for weight 1(least
 263    prioritised); 2 stands for weight 2; tc. */
 264 #define CCM_REG_PBF_WEIGHT                                       0xd00ac
 265 #define CCM_REG_PHYS_QNUM1_0                                     0xd0134
 266 #define CCM_REG_PHYS_QNUM1_1                                     0xd0138
 267 #define CCM_REG_PHYS_QNUM2_0                                     0xd013c
 268 #define CCM_REG_PHYS_QNUM2_1                                     0xd0140
 269 #define CCM_REG_PHYS_QNUM3_0                                     0xd0144
 270 #define CCM_REG_PHYS_QNUM3_1                                     0xd0148
 271 #define CCM_REG_QOS_PHYS_QNUM0_0                                 0xd0114
 272 #define CCM_REG_QOS_PHYS_QNUM0_1                                 0xd0118
 273 #define CCM_REG_QOS_PHYS_QNUM1_0                                 0xd011c
 274 #define CCM_REG_QOS_PHYS_QNUM1_1                                 0xd0120
 275 #define CCM_REG_QOS_PHYS_QNUM2_0                                 0xd0124
 276 #define CCM_REG_QOS_PHYS_QNUM2_1                                 0xd0128
 277 #define CCM_REG_QOS_PHYS_QNUM3_0                                 0xd012c
 278 #define CCM_REG_QOS_PHYS_QNUM3_1                                 0xd0130
 279 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
 280    disregarded; acknowledge output is deasserted; all other signals are
 281    treated as usual; if 1 - normal activity. */
 282 #define CCM_REG_STORM_CCM_IFEN                                   0xd0010
 283 /* [RC 1] Set when the message length mismatch (relative to last indication)
 284    at the STORM interface is detected. */
 285 #define CCM_REG_STORM_LENGTH_MIS                                 0xd016c
 286 /* [RW 3] The weight of the STORM input in the WRR (Weighted Round robin)
 287    mechanism. 0 stands for weight 8 (the most prioritised); 1 stands for
 288    weight 1(least prioritised); 2 stands for weight 2 (more prioritised);
 289    tc. */
 290 #define CCM_REG_STORM_WEIGHT                                     0xd009c
 291 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
 292    disregarded; acknowledge output is deasserted; all other signals are
 293    treated as usual; if 1 - normal activity. */
 294 #define CCM_REG_TSEM_IFEN                                        0xd001c
 295 /* [RC 1] Set when the message length mismatch (relative to last indication)
 296    at the tsem interface is detected. */
 297 #define CCM_REG_TSEM_LENGTH_MIS                                  0xd0174
 298 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
 299    weight 8 (the most prioritised); 1 stands for weight 1(least
 300    prioritised); 2 stands for weight 2; tc. */
 301 #define CCM_REG_TSEM_WEIGHT                                      0xd00a0
 302 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
 303    disregarded; acknowledge output is deasserted; all other signals are
 304    treated as usual; if 1 - normal activity. */
 305 #define CCM_REG_USEM_IFEN                                        0xd0024
 306 /* [RC 1] Set when message length mismatch (relative to last indication) at
 307    the usem interface is detected. */
 308 #define CCM_REG_USEM_LENGTH_MIS                                  0xd017c
 309 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
 310    weight 8 (the most prioritised); 1 stands for weight 1(least
 311    prioritised); 2 stands for weight 2; tc. */
 312 #define CCM_REG_USEM_WEIGHT                                      0xd00a8
 313 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
 314    disregarded; acknowledge output is deasserted; all other signals are
 315    treated as usual; if 1 - normal activity. */
 316 #define CCM_REG_XSEM_IFEN                                        0xd0020
 317 /* [RC 1] Set when the message length mismatch (relative to last indication)
 318    at the xsem interface is detected. */
 319 #define CCM_REG_XSEM_LENGTH_MIS                                  0xd0178
 320 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
 321    weight 8 (the most prioritised); 1 stands for weight 1(least
 322    prioritised); 2 stands for weight 2; tc. */
 323 #define CCM_REG_XSEM_WEIGHT                                      0xd00a4
 324 /* [RW 19] Indirect access to the descriptor table of the XX protection
 325    mechanism. The fields are: [5:0] - message length; [12:6] - message
 326    pointer; 18:13] - next pointer. */
 327 #define CCM_REG_XX_DESCR_TABLE                                   0xd0300
 328 #define CCM_REG_XX_DESCR_TABLE_SIZE                              36
 329 /* [R 7] Used to read the value of XX protection Free counter. */
 330 #define CCM_REG_XX_FREE                                          0xd0184
 331 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
 332    of the Input Stage XX protection buffer by the XX protection pending
 333    messages. Max credit available - 127. Write writes the initial credit
 334    value; read returns the current value of the credit counter. Must be
 335    initialized to maximum XX protected message size - 2 at start-up. */
 336 #define CCM_REG_XX_INIT_CRD                                      0xd0220
 337 /* [RW 7] The maximum number of pending messages; which may be stored in XX
 338    protection. At read the ~ccm_registers_xx_free.xx_free counter is read.
 339    At write comprises the start value of the ~ccm_registers_xx_free.xx_free
 340    counter. */
 341 #define CCM_REG_XX_MSG_NUM                                       0xd0224
 342 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
 343 #define CCM_REG_XX_OVFL_EVNT_ID                                  0xd0044
 344 /* [RW 18] Indirect access to the XX table of the XX protection mechanism.
 345    The fields are: [5:0] - tail pointer; 11:6] - Link List size; 17:12] -
 346    header pointer. */
 347 #define CCM_REG_XX_TABLE                                         0xd0280
 348 #define CDU_REG_CDU_CHK_MASK0                                    0x101000
 349 #define CDU_REG_CDU_CHK_MASK1                                    0x101004
 350 #define CDU_REG_CDU_CONTROL0                                     0x101008
 351 #define CDU_REG_CDU_DEBUG                                        0x101010
 352 #define CDU_REG_CDU_GLOBAL_PARAMS                                0x101020
 353 /* [RW 7] Interrupt mask register #0 read/write */
 354 #define CDU_REG_CDU_INT_MASK                                     0x10103c
 355 /* [R 7] Interrupt register #0 read */
 356 #define CDU_REG_CDU_INT_STS                                      0x101030
 357 /* [RW 5] Parity mask register #0 read/write */
 358 #define CDU_REG_CDU_PRTY_MASK                                    0x10104c
 359 /* [R 5] Parity register #0 read */
 360 #define CDU_REG_CDU_PRTY_STS                                     0x101040
 361 /* [RC 5] Parity register #0 read clear */
 362 #define CDU_REG_CDU_PRTY_STS_CLR                                 0x101044
 363 /* [RC 32] logging of error data in case of a CDU load error:
 364    {expected_cid[15:0]; xpected_type[2:0]; xpected_region[2:0]; ctive_error;
 365    ype_error; ctual_active; ctual_compressed_context}; */
 366 #define CDU_REG_ERROR_DATA                                       0x101014
 367 /* [WB 216] L1TT ram access. each entry has the following format :
 368    {mrege_regions[7:0]; ffset12[5:0]...offset0[5:0];
 369    ength12[5:0]...length0[5:0]; d12[3:0]...id0[3:0]} */
 370 #define CDU_REG_L1TT                                             0x101800
 371 /* [WB 24] MATT ram access. each entry has the following
 372    format:{RegionLength[11:0]; egionOffset[11:0]} */
 373 #define CDU_REG_MATT                                             0x101100
 374 /* [RW 1] when this bit is set the CDU operates in e1hmf mode */
 375 #define CDU_REG_MF_MODE                                          0x101050
 376 /* [R 1] indication the initializing the activity counter by the hardware
 377    was done. */
 378 #define CFC_REG_AC_INIT_DONE                                     0x104078
 379 /* [RW 13] activity counter ram access */
 380 #define CFC_REG_ACTIVITY_COUNTER                                 0x104400
 381 #define CFC_REG_ACTIVITY_COUNTER_SIZE                            256
 382 /* [R 1] indication the initializing the cams by the hardware was done. */
 383 #define CFC_REG_CAM_INIT_DONE                                    0x10407c
 384 /* [RW 2] Interrupt mask register #0 read/write */
 385 #define CFC_REG_CFC_INT_MASK                                     0x104108
 386 /* [R 2] Interrupt register #0 read */
 387 #define CFC_REG_CFC_INT_STS                                      0x1040fc
 388 /* [RC 2] Interrupt register #0 read clear */
 389 #define CFC_REG_CFC_INT_STS_CLR                                  0x104100
 390 /* [RW 4] Parity mask register #0 read/write */
 391 #define CFC_REG_CFC_PRTY_MASK                                    0x104118
 392 /* [R 4] Parity register #0 read */
 393 #define CFC_REG_CFC_PRTY_STS                                     0x10410c
 394 /* [RC 4] Parity register #0 read clear */
 395 #define CFC_REG_CFC_PRTY_STS_CLR                                 0x104110
 396 /* [RW 21] CID cam access (21:1 - Data; alid - 0) */
 397 #define CFC_REG_CID_CAM                                          0x104800
 398 #define CFC_REG_CONTROL0                                         0x104028
 399 #define CFC_REG_DEBUG0                                           0x104050
 400 /* [RW 14] indicates per error (in #cfc_registers_cfc_error_vector.cfc_error
 401    vector) whether the cfc should be disabled upon it */
 402 #define CFC_REG_DISABLE_ON_ERROR                                 0x104044
 403 /* [RC 14] CFC error vector. when the CFC detects an internal error it will
 404    set one of these bits. the bit description can be found in CFC
 405    specifications */
 406 #define CFC_REG_ERROR_VECTOR                                     0x10403c
 407 /* [WB 93] LCID info ram access */
 408 #define CFC_REG_INFO_RAM                                         0x105000
 409 #define CFC_REG_INFO_RAM_SIZE                                    1024
 410 #define CFC_REG_INIT_REG                                         0x10404c
 411 #define CFC_REG_INTERFACES                                       0x104058
 412 /* [RW 24] {weight_load_client7[2:0] to weight_load_client0[2:0]}. this
 413    field allows changing the priorities of the weighted-round-robin arbiter
 414    which selects which CFC load client should be served next */
 415 #define CFC_REG_LCREQ_WEIGHTS                                    0x104084
 416 /* [RW 16] Link List ram access; data = {prev_lcid; ext_lcid} */
 417 #define CFC_REG_LINK_LIST                                        0x104c00
 418 #define CFC_REG_LINK_LIST_SIZE                                   256
 419 /* [R 1] indication the initializing the link list by the hardware was done. */
 420 #define CFC_REG_LL_INIT_DONE                                     0x104074
 421 /* [R 9] Number of allocated LCIDs which are at empty state */
 422 #define CFC_REG_NUM_LCIDS_ALLOC                                  0x104020
 423 /* [R 9] Number of Arriving LCIDs in Link List Block */
 424 #define CFC_REG_NUM_LCIDS_ARRIVING                               0x104004
 425 /* [R 9] Number of Leaving LCIDs in Link List Block */
 426 #define CFC_REG_NUM_LCIDS_LEAVING                                0x104018
 427 #define CFC_REG_WEAK_ENABLE_PF                                   0x104124
 428 /* [RW 8] The event id for aggregated interrupt 0 */
 429 #define CSDM_REG_AGG_INT_EVENT_0                                 0xc2038
 430 #define CSDM_REG_AGG_INT_EVENT_10                                0xc2060
 431 #define CSDM_REG_AGG_INT_EVENT_11                                0xc2064
 432 #define CSDM_REG_AGG_INT_EVENT_12                                0xc2068
 433 #define CSDM_REG_AGG_INT_EVENT_13                                0xc206c
 434 #define CSDM_REG_AGG_INT_EVENT_14                                0xc2070
 435 #define CSDM_REG_AGG_INT_EVENT_15                                0xc2074
 436 #define CSDM_REG_AGG_INT_EVENT_16                                0xc2078
 437 #define CSDM_REG_AGG_INT_EVENT_2                                 0xc2040
 438 #define CSDM_REG_AGG_INT_EVENT_3                                 0xc2044
 439 #define CSDM_REG_AGG_INT_EVENT_4                                 0xc2048
 440 #define CSDM_REG_AGG_INT_EVENT_5                                 0xc204c
 441 #define CSDM_REG_AGG_INT_EVENT_6                                 0xc2050
 442 #define CSDM_REG_AGG_INT_EVENT_7                                 0xc2054
 443 #define CSDM_REG_AGG_INT_EVENT_8                                 0xc2058
 444 #define CSDM_REG_AGG_INT_EVENT_9                                 0xc205c
 445 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
 446    or auto-mask-mode (1) */
 447 #define CSDM_REG_AGG_INT_MODE_10                                 0xc21e0
 448 #define CSDM_REG_AGG_INT_MODE_11                                 0xc21e4
 449 #define CSDM_REG_AGG_INT_MODE_12                                 0xc21e8
 450 #define CSDM_REG_AGG_INT_MODE_13                                 0xc21ec
 451 #define CSDM_REG_AGG_INT_MODE_14                                 0xc21f0
 452 #define CSDM_REG_AGG_INT_MODE_15                                 0xc21f4
 453 #define CSDM_REG_AGG_INT_MODE_16                                 0xc21f8
 454 #define CSDM_REG_AGG_INT_MODE_6                                  0xc21d0
 455 #define CSDM_REG_AGG_INT_MODE_7                                  0xc21d4
 456 #define CSDM_REG_AGG_INT_MODE_8                                  0xc21d8
 457 #define CSDM_REG_AGG_INT_MODE_9                                  0xc21dc
 458 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
 459 #define CSDM_REG_CFC_RSP_START_ADDR                              0xc2008
 460 /* [RW 16] The maximum value of the completion counter #0 */
 461 #define CSDM_REG_CMP_COUNTER_MAX0                                0xc201c
 462 /* [RW 16] The maximum value of the completion counter #1 */
 463 #define CSDM_REG_CMP_COUNTER_MAX1                                0xc2020
 464 /* [RW 16] The maximum value of the completion counter #2 */
 465 #define CSDM_REG_CMP_COUNTER_MAX2                                0xc2024
 466 /* [RW 16] The maximum value of the completion counter #3 */
 467 #define CSDM_REG_CMP_COUNTER_MAX3                                0xc2028
 468 /* [RW 13] The start address in the internal RAM for the completion
 469    counters. */
 470 #define CSDM_REG_CMP_COUNTER_START_ADDR                          0xc200c
 471 /* [RW 32] Interrupt mask register #0 read/write */
 472 #define CSDM_REG_CSDM_INT_MASK_0                                 0xc229c
 473 #define CSDM_REG_CSDM_INT_MASK_1                                 0xc22ac
 474 /* [R 32] Interrupt register #0 read */
 475 #define CSDM_REG_CSDM_INT_STS_0                                  0xc2290
 476 #define CSDM_REG_CSDM_INT_STS_1                                  0xc22a0
 477 /* [RW 11] Parity mask register #0 read/write */
 478 #define CSDM_REG_CSDM_PRTY_MASK                                  0xc22bc
 479 /* [R 11] Parity register #0 read */
 480 #define CSDM_REG_CSDM_PRTY_STS                                   0xc22b0
 481 /* [RC 11] Parity register #0 read clear */
 482 #define CSDM_REG_CSDM_PRTY_STS_CLR                               0xc22b4
 483 #define CSDM_REG_ENABLE_IN1                                      0xc2238
 484 #define CSDM_REG_ENABLE_IN2                                      0xc223c
 485 #define CSDM_REG_ENABLE_OUT1                                     0xc2240
 486 #define CSDM_REG_ENABLE_OUT2                                     0xc2244
 487 /* [RW 4] The initial number of messages that can be sent to the pxp control
 488    interface without receiving any ACK. */
 489 #define CSDM_REG_INIT_CREDIT_PXP_CTRL                            0xc24bc
 490 /* [ST 32] The number of ACK after placement messages received */
 491 #define CSDM_REG_NUM_OF_ACK_AFTER_PLACE                          0xc227c
 492 /* [ST 32] The number of packet end messages received from the parser */
 493 #define CSDM_REG_NUM_OF_PKT_END_MSG                              0xc2274
 494 /* [ST 32] The number of requests received from the pxp async if */
 495 #define CSDM_REG_NUM_OF_PXP_ASYNC_REQ                            0xc2278
 496 /* [ST 32] The number of commands received in queue 0 */
 497 #define CSDM_REG_NUM_OF_Q0_CMD                                   0xc2248
 498 /* [ST 32] The number of commands received in queue 10 */
 499 #define CSDM_REG_NUM_OF_Q10_CMD                                  0xc226c
 500 /* [ST 32] The number of commands received in queue 11 */
 501 #define CSDM_REG_NUM_OF_Q11_CMD                                  0xc2270
 502 /* [ST 32] The number of commands received in queue 1 */
 503 #define CSDM_REG_NUM_OF_Q1_CMD                                   0xc224c
 504 /* [ST 32] The number of commands received in queue 3 */
 505 #define CSDM_REG_NUM_OF_Q3_CMD                                   0xc2250
 506 /* [ST 32] The number of commands received in queue 4 */
 507 #define CSDM_REG_NUM_OF_Q4_CMD                                   0xc2254
 508 /* [ST 32] The number of commands received in queue 5 */
 509 #define CSDM_REG_NUM_OF_Q5_CMD                                   0xc2258
 510 /* [ST 32] The number of commands received in queue 6 */
 511 #define CSDM_REG_NUM_OF_Q6_CMD                                   0xc225c
 512 /* [ST 32] The number of commands received in queue 7 */
 513 #define CSDM_REG_NUM_OF_Q7_CMD                                   0xc2260
 514 /* [ST 32] The number of commands received in queue 8 */
 515 #define CSDM_REG_NUM_OF_Q8_CMD                                   0xc2264
 516 /* [ST 32] The number of commands received in queue 9 */
 517 #define CSDM_REG_NUM_OF_Q9_CMD                                   0xc2268
 518 /* [RW 13] The start address in the internal RAM for queue counters */
 519 #define CSDM_REG_Q_COUNTER_START_ADDR                            0xc2010
 520 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
 521 #define CSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0xc2548
 522 /* [R 1] parser fifo empty in sdm_sync block */
 523 #define CSDM_REG_SYNC_PARSER_EMPTY                               0xc2550
 524 /* [R 1] parser serial fifo empty in sdm_sync block */
 525 #define CSDM_REG_SYNC_SYNC_EMPTY                                 0xc2558
 526 /* [RW 32] Tick for timer counter. Applicable only when
 527    ~csdm_registers_timer_tick_enable.timer_tick_enable =1 */
 528 #define CSDM_REG_TIMER_TICK                                      0xc2000
 529 /* [RW 5] The number of time_slots in the arbitration cycle */
 530 #define CSEM_REG_ARB_CYCLE_SIZE                                  0x200034
 531 /* [RW 3] The source that is associated with arbitration element 0. Source
 532    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
 533    sleeping thread with priority 1; 4- sleeping thread with priority 2 */
 534 #define CSEM_REG_ARB_ELEMENT0                                    0x200020
 535 /* [RW 3] The source that is associated with arbitration element 1. Source
 536    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
 537    sleeping thread with priority 1; 4- sleeping thread with priority 2.
 538    Could not be equal to register ~csem_registers_arb_element0.arb_element0 */
 539 #define CSEM_REG_ARB_ELEMENT1                                    0x200024
 540 /* [RW 3] The source that is associated with arbitration element 2. Source
 541    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
 542    sleeping thread with priority 1; 4- sleeping thread with priority 2.
 543    Could not be equal to register ~csem_registers_arb_element0.arb_element0
 544    and ~csem_registers_arb_element1.arb_element1 */
 545 #define CSEM_REG_ARB_ELEMENT2                                    0x200028
 546 /* [RW 3] The source that is associated with arbitration element 3. Source
 547    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
 548    sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
 549    not be equal to register ~csem_registers_arb_element0.arb_element0 and
 550    ~csem_registers_arb_element1.arb_element1 and
 551    ~csem_registers_arb_element2.arb_element2 */
 552 #define CSEM_REG_ARB_ELEMENT3                                    0x20002c
 553 /* [RW 3] The source that is associated with arbitration element 4. Source
 554    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
 555    sleeping thread with priority 1; 4- sleeping thread with priority 2.
 556    Could not be equal to register ~csem_registers_arb_element0.arb_element0
 557    and ~csem_registers_arb_element1.arb_element1 and
 558    ~csem_registers_arb_element2.arb_element2 and
 559    ~csem_registers_arb_element3.arb_element3 */
 560 #define CSEM_REG_ARB_ELEMENT4                                    0x200030
 561 /* [RW 32] Interrupt mask register #0 read/write */
 562 #define CSEM_REG_CSEM_INT_MASK_0                                 0x200110
 563 #define CSEM_REG_CSEM_INT_MASK_1                                 0x200120
 564 /* [R 32] Interrupt register #0 read */
 565 #define CSEM_REG_CSEM_INT_STS_0                                  0x200104
 566 #define CSEM_REG_CSEM_INT_STS_1                                  0x200114
 567 /* [RW 32] Parity mask register #0 read/write */
 568 #define CSEM_REG_CSEM_PRTY_MASK_0                                0x200130
 569 #define CSEM_REG_CSEM_PRTY_MASK_1                                0x200140
 570 /* [R 32] Parity register #0 read */
 571 #define CSEM_REG_CSEM_PRTY_STS_0                                 0x200124
 572 #define CSEM_REG_CSEM_PRTY_STS_1                                 0x200134
 573 /* [RC 32] Parity register #0 read clear */
 574 #define CSEM_REG_CSEM_PRTY_STS_CLR_0                             0x200128
 575 #define CSEM_REG_CSEM_PRTY_STS_CLR_1                             0x200138
 576 #define CSEM_REG_ENABLE_IN                                       0x2000a4
 577 #define CSEM_REG_ENABLE_OUT                                      0x2000a8
 578 /* [RW 32] This address space contains all registers and memories that are
 579    placed in SEM_FAST block. The SEM_FAST registers are described in
 580    appendix B. In order to access the sem_fast registers the base address
 581    ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
 582 #define CSEM_REG_FAST_MEMORY                                     0x220000
 583 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
 584    by the microcode */
 585 #define CSEM_REG_FIC0_DISABLE                                    0x200224
 586 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
 587    by the microcode */
 588 #define CSEM_REG_FIC1_DISABLE                                    0x200234
 589 /* [RW 15] Interrupt table Read and write access to it is not possible in
 590    the middle of the work */
 591 #define CSEM_REG_INT_TABLE                                       0x200400
 592 /* [ST 24] Statistics register. The number of messages that entered through
 593    FIC0 */
 594 #define CSEM_REG_MSG_NUM_FIC0                                    0x200000
 595 /* [ST 24] Statistics register. The number of messages that entered through
 596    FIC1 */
 597 #define CSEM_REG_MSG_NUM_FIC1                                    0x200004
 598 /* [ST 24] Statistics register. The number of messages that were sent to
 599    FOC0 */
 600 #define CSEM_REG_MSG_NUM_FOC0                                    0x200008
 601 /* [ST 24] Statistics register. The number of messages that were sent to
 602    FOC1 */
 603 #define CSEM_REG_MSG_NUM_FOC1                                    0x20000c
 604 /* [ST 24] Statistics register. The number of messages that were sent to
 605    FOC2 */
 606 #define CSEM_REG_MSG_NUM_FOC2                                    0x200010
 607 /* [ST 24] Statistics register. The number of messages that were sent to
 608    FOC3 */
 609 #define CSEM_REG_MSG_NUM_FOC3                                    0x200014
 610 /* [RW 1] Disables input messages from the passive buffer May be updated
 611    during run_time by the microcode */
 612 #define CSEM_REG_PAS_DISABLE                                     0x20024c
 613 /* [WB 128] Debug only. Passive buffer memory */
 614 #define CSEM_REG_PASSIVE_BUFFER                                  0x202000
 615 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
 616 #define CSEM_REG_PRAM                                            0x240000
 617 /* [R 16] Valid sleeping threads indication have bit per thread */
 618 #define CSEM_REG_SLEEP_THREADS_VALID                             0x20026c
 619 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
 620 #define CSEM_REG_SLOW_EXT_STORE_EMPTY                            0x2002a0
 621 /* [RW 16] List of free threads . There is a bit per thread. */
 622 #define CSEM_REG_THREADS_LIST                                    0x2002e4
 623 /* [RW 3] The arbitration scheme of time_slot 0 */
 624 #define CSEM_REG_TS_0_AS                                         0x200038
 625 /* [RW 3] The arbitration scheme of time_slot 10 */
 626 #define CSEM_REG_TS_10_AS                                        0x200060
 627 /* [RW 3] The arbitration scheme of time_slot 11 */
 628 #define CSEM_REG_TS_11_AS                                        0x200064
 629 /* [RW 3] The arbitration scheme of time_slot 12 */
 630 #define CSEM_REG_TS_12_AS                                        0x200068
 631 /* [RW 3] The arbitration scheme of time_slot 13 */
 632 #define CSEM_REG_TS_13_AS                                        0x20006c
 633 /* [RW 3] The arbitration scheme of time_slot 14 */
 634 #define CSEM_REG_TS_14_AS                                        0x200070
 635 /* [RW 3] The arbitration scheme of time_slot 15 */
 636 #define CSEM_REG_TS_15_AS                                        0x200074
 637 /* [RW 3] The arbitration scheme of time_slot 16 */
 638 #define CSEM_REG_TS_16_AS                                        0x200078
 639 /* [RW 3] The arbitration scheme of time_slot 17 */
 640 #define CSEM_REG_TS_17_AS                                        0x20007c
 641 /* [RW 3] The arbitration scheme of time_slot 18 */
 642 #define CSEM_REG_TS_18_AS                                        0x200080
 643 /* [RW 3] The arbitration scheme of time_slot 1 */
 644 #define CSEM_REG_TS_1_AS                                         0x20003c
 645 /* [RW 3] The arbitration scheme of time_slot 2 */
 646 #define CSEM_REG_TS_2_AS                                         0x200040
 647 /* [RW 3] The arbitration scheme of time_slot 3 */
 648 #define CSEM_REG_TS_3_AS                                         0x200044
 649 /* [RW 3] The arbitration scheme of time_slot 4 */
 650 #define CSEM_REG_TS_4_AS                                         0x200048
 651 /* [RW 3] The arbitration scheme of time_slot 5 */
 652 #define CSEM_REG_TS_5_AS                                         0x20004c
 653 /* [RW 3] The arbitration scheme of time_slot 6 */
 654 #define CSEM_REG_TS_6_AS                                         0x200050
 655 /* [RW 3] The arbitration scheme of time_slot 7 */
 656 #define CSEM_REG_TS_7_AS                                         0x200054
 657 /* [RW 3] The arbitration scheme of time_slot 8 */
 658 #define CSEM_REG_TS_8_AS                                         0x200058
 659 /* [RW 3] The arbitration scheme of time_slot 9 */
 660 #define CSEM_REG_TS_9_AS                                         0x20005c
 661 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
 662  * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
 663 #define CSEM_REG_VFPF_ERR_NUM                                    0x200380
 664 /* [RW 1] Parity mask register #0 read/write */
 665 #define DBG_REG_DBG_PRTY_MASK                                    0xc0a8
 666 /* [R 1] Parity register #0 read */
 667 #define DBG_REG_DBG_PRTY_STS                                     0xc09c
 668 /* [RC 1] Parity register #0 read clear */
 669 #define DBG_REG_DBG_PRTY_STS_CLR                                 0xc0a0
 670 /* [RW 1] When set the DMAE will process the commands as in E1.5. 1.The
 671  * function that is used is always SRC-PCI; 2.VF_Valid = 0; 3.VFID=0;
 672  * 4.Completion function=0; 5.Error handling=0 */
 673 #define DMAE_REG_BACKWARD_COMP_EN                                0x10207c
 674 /* [RW 32] Commands memory. The address to command X; row Y is to calculated
 675    as 14*X+Y. */
 676 #define DMAE_REG_CMD_MEM                                         0x102400
 677 #define DMAE_REG_CMD_MEM_SIZE                                    224
 678 /* [RW 1] If 0 - the CRC-16c initial value is all zeroes; if 1 - the CRC-16c
 679    initial value is all ones. */
 680 #define DMAE_REG_CRC16C_INIT                                     0x10201c
 681 /* [RW 1] If 0 - the CRC-16 T10 initial value is all zeroes; if 1 - the
 682    CRC-16 T10 initial value is all ones. */
 683 #define DMAE_REG_CRC16T10_INIT                                   0x102020
 684 /* [RW 2] Interrupt mask register #0 read/write */
 685 #define DMAE_REG_DMAE_INT_MASK                                   0x102054
 686 /* [RW 4] Parity mask register #0 read/write */
 687 #define DMAE_REG_DMAE_PRTY_MASK                                  0x102064
 688 /* [R 4] Parity register #0 read */
 689 #define DMAE_REG_DMAE_PRTY_STS                                   0x102058
 690 /* [RC 4] Parity register #0 read clear */
 691 #define DMAE_REG_DMAE_PRTY_STS_CLR                               0x10205c
 692 /* [RW 1] Command 0 go. */
 693 #define DMAE_REG_GO_C0                                           0x102080
 694 /* [RW 1] Command 1 go. */
 695 #define DMAE_REG_GO_C1                                           0x102084
 696 /* [RW 1] Command 10 go. */
 697 #define DMAE_REG_GO_C10                                          0x102088
 698 /* [RW 1] Command 11 go. */
 699 #define DMAE_REG_GO_C11                                          0x10208c
 700 /* [RW 1] Command 12 go. */
 701 #define DMAE_REG_GO_C12                                          0x102090
 702 /* [RW 1] Command 13 go. */
 703 #define DMAE_REG_GO_C13                                          0x102094
 704 /* [RW 1] Command 14 go. */
 705 #define DMAE_REG_GO_C14                                          0x102098
 706 /* [RW 1] Command 15 go. */
 707 #define DMAE_REG_GO_C15                                          0x10209c
 708 /* [RW 1] Command 2 go. */
 709 #define DMAE_REG_GO_C2                                           0x1020a0
 710 /* [RW 1] Command 3 go. */
 711 #define DMAE_REG_GO_C3                                           0x1020a4
 712 /* [RW 1] Command 4 go. */
 713 #define DMAE_REG_GO_C4                                           0x1020a8
 714 /* [RW 1] Command 5 go. */
 715 #define DMAE_REG_GO_C5                                           0x1020ac
 716 /* [RW 1] Command 6 go. */
 717 #define DMAE_REG_GO_C6                                           0x1020b0
 718 /* [RW 1] Command 7 go. */
 719 #define DMAE_REG_GO_C7                                           0x1020b4
 720 /* [RW 1] Command 8 go. */
 721 #define DMAE_REG_GO_C8                                           0x1020b8
 722 /* [RW 1] Command 9 go. */
 723 #define DMAE_REG_GO_C9                                           0x1020bc
 724 /* [RW 1] DMAE GRC Interface (Target; aster) enable. If 0 - the acknowledge
 725    input is disregarded; valid is deasserted; all other signals are treated
 726    as usual; if 1 - normal activity. */
 727 #define DMAE_REG_GRC_IFEN                                        0x102008
 728 /* [RW 1] DMAE PCI Interface (Request; ead; rite) enable. If 0 - the
 729    acknowledge input is disregarded; valid is deasserted; full is asserted;
 730    all other signals are treated as usual; if 1 - normal activity. */
 731 #define DMAE_REG_PCI_IFEN                                        0x102004
 732 /* [RW 4] DMAE- PCI Request Interface initial credit. Write writes the
 733    initial value to the credit counter; related to the address. Read returns
 734    the current value of the counter. */
 735 #define DMAE_REG_PXP_REQ_INIT_CRD                                0x1020c0
 736 /* [RW 8] Aggregation command. */
 737 #define DORQ_REG_AGG_CMD0                                        0x170060
 738 /* [RW 8] Aggregation command. */
 739 #define DORQ_REG_AGG_CMD1                                        0x170064
 740 /* [RW 8] Aggregation command. */
 741 #define DORQ_REG_AGG_CMD2                                        0x170068
 742 /* [RW 8] Aggregation command. */
 743 #define DORQ_REG_AGG_CMD3                                        0x17006c
 744 /* [RW 28] UCM Header. */
 745 #define DORQ_REG_CMHEAD_RX                                       0x170050
 746 /* [RW 32] Doorbell address for RBC doorbells (function 0). */
 747 #define DORQ_REG_DB_ADDR0                                        0x17008c
 748 /* [RW 5] Interrupt mask register #0 read/write */
 749 #define DORQ_REG_DORQ_INT_MASK                                   0x170180
 750 /* [R 5] Interrupt register #0 read */
 751 #define DORQ_REG_DORQ_INT_STS                                    0x170174
 752 /* [RC 5] Interrupt register #0 read clear */
 753 #define DORQ_REG_DORQ_INT_STS_CLR                                0x170178
 754 /* [RW 2] Parity mask register #0 read/write */
 755 #define DORQ_REG_DORQ_PRTY_MASK                                  0x170190
 756 /* [R 2] Parity register #0 read */
 757 #define DORQ_REG_DORQ_PRTY_STS                                   0x170184
 758 /* [RC 2] Parity register #0 read clear */
 759 #define DORQ_REG_DORQ_PRTY_STS_CLR                               0x170188
 760 /* [RW 8] The address to write the DPM CID to STORM. */
 761 #define DORQ_REG_DPM_CID_ADDR                                    0x170044
 762 /* [RW 5] The DPM mode CID extraction offset. */
 763 #define DORQ_REG_DPM_CID_OFST                                    0x170030
 764 /* [RW 12] The threshold of the DQ FIFO to send the almost full interrupt. */
 765 #define DORQ_REG_DQ_FIFO_AFULL_TH                                0x17007c
 766 /* [RW 12] The threshold of the DQ FIFO to send the full interrupt. */
 767 #define DORQ_REG_DQ_FIFO_FULL_TH                                 0x170078
 768 /* [R 13] Current value of the DQ FIFO fill level according to following
 769    pointer. The range is 0 - 256 FIFO rows; where each row stands for the
 770    doorbell. */
 771 #define DORQ_REG_DQ_FILL_LVLF                                    0x1700a4
 772 /* [R 1] DQ FIFO full status. Is set; when FIFO filling level is more or
 773    equal to full threshold; reset on full clear. */
 774 #define DORQ_REG_DQ_FULL_ST                                      0x1700c0
 775 /* [RW 28] The value sent to CM header in the case of CFC load error. */
 776 #define DORQ_REG_ERR_CMHEAD                                      0x170058
 777 #define DORQ_REG_IF_EN                                           0x170004
 778 #define DORQ_REG_MODE_ACT                                        0x170008
 779 /* [RW 5] The normal mode CID extraction offset. */
 780 #define DORQ_REG_NORM_CID_OFST                                   0x17002c
 781 /* [RW 28] TCM Header when only TCP context is loaded. */
 782 #define DORQ_REG_NORM_CMHEAD_TX                                  0x17004c
 783 /* [RW 3] The number of simultaneous outstanding requests to Context Fetch
 784    Interface. */
 785 #define DORQ_REG_OUTST_REQ                                       0x17003c
 786 #define DORQ_REG_REGN                                            0x170038
 787 /* [R 4] Current value of response A counter credit. Initial credit is
 788    configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
 789    register. */
 790 #define DORQ_REG_RSPA_CRD_CNT                                    0x1700ac
 791 /* [R 4] Current value of response B counter credit. Initial credit is
 792    configured through write to ~dorq_registers_rsp_init_crd.rsp_init_crd
 793    register. */
 794 #define DORQ_REG_RSPB_CRD_CNT                                    0x1700b0
 795 /* [RW 4] The initial credit at the Doorbell Response Interface. The write
 796    writes the same initial credit to the rspa_crd_cnt and rspb_crd_cnt. The
 797    read reads this written value. */
 798 #define DORQ_REG_RSP_INIT_CRD                                    0x170048
 799 /* [RW 4] Initial activity counter value on the load request; when the
 800    shortcut is done. */
 801 #define DORQ_REG_SHRT_ACT_CNT                                    0x170070
 802 /* [RW 28] TCM Header when both ULP and TCP context is loaded. */
 803 #define DORQ_REG_SHRT_CMHEAD                                     0x170054
 804 #define HC_CONFIG_0_REG_ATTN_BIT_EN_0                            (0x1<<4)
 805 #define HC_CONFIG_0_REG_INT_LINE_EN_0                            (0x1<<3)
 806 #define HC_CONFIG_0_REG_MSI_ATTN_EN_0                            (0x1<<7)
 807 #define HC_CONFIG_0_REG_MSI_MSIX_INT_EN_0                        (0x1<<2)
 808 #define HC_CONFIG_0_REG_SINGLE_ISR_EN_0                          (0x1<<1)
 809 #define HC_REG_AGG_INT_0                                         0x108050
 810 #define HC_REG_AGG_INT_1                                         0x108054
 811 #define HC_REG_ATTN_BIT                                          0x108120
 812 #define HC_REG_ATTN_IDX                                          0x108100
 813 #define HC_REG_ATTN_MSG0_ADDR_L                                  0x108018
 814 #define HC_REG_ATTN_MSG1_ADDR_L                                  0x108020
 815 #define HC_REG_ATTN_NUM_P0                                       0x108038
 816 #define HC_REG_ATTN_NUM_P1                                       0x10803c
 817 #define HC_REG_COMMAND_REG                                       0x108180
 818 #define HC_REG_CONFIG_0                                          0x108000
 819 #define HC_REG_CONFIG_1                                          0x108004
 820 #define HC_REG_FUNC_NUM_P0                                       0x1080ac
 821 #define HC_REG_FUNC_NUM_P1                                       0x1080b0
 822 /* [RW 3] Parity mask register #0 read/write */
 823 #define HC_REG_HC_PRTY_MASK                                      0x1080a0
 824 /* [R 3] Parity register #0 read */
 825 #define HC_REG_HC_PRTY_STS                                       0x108094
 826 /* [RC 3] Parity register #0 read clear */
 827 #define HC_REG_HC_PRTY_STS_CLR                                   0x108098
 828 #define HC_REG_INT_MASK                                          0x108108
 829 #define HC_REG_LEADING_EDGE_0                                    0x108040
 830 #define HC_REG_LEADING_EDGE_1                                    0x108048
 831 #define HC_REG_MAIN_MEMORY                                       0x108800
 832 #define HC_REG_MAIN_MEMORY_SIZE                                  152
 833 #define HC_REG_P0_PROD_CONS                                      0x108200
 834 #define HC_REG_P1_PROD_CONS                                      0x108400
 835 #define HC_REG_PBA_COMMAND                                       0x108140
 836 #define HC_REG_PCI_CONFIG_0                                      0x108010
 837 #define HC_REG_PCI_CONFIG_1                                      0x108014
 838 #define HC_REG_STATISTIC_COUNTERS                                0x109000
 839 #define HC_REG_TRAILING_EDGE_0                                   0x108044
 840 #define HC_REG_TRAILING_EDGE_1                                   0x10804c
 841 #define HC_REG_UC_RAM_ADDR_0                                     0x108028
 842 #define HC_REG_UC_RAM_ADDR_1                                     0x108030
 843 #define HC_REG_USTORM_ADDR_FOR_COALESCE                          0x108068
 844 #define HC_REG_VQID_0                                            0x108008
 845 #define HC_REG_VQID_1                                            0x10800c
 846 #define IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN             (0x1<<1)
 847 #define IGU_REG_ATTENTION_ACK_BITS                               0x130108
 848 /* [R 4] Debug: attn_fsm */
 849 #define IGU_REG_ATTN_FSM                                         0x130054
 850 #define IGU_REG_ATTN_MSG_ADDR_H                          0x13011c
 851 #define IGU_REG_ATTN_MSG_ADDR_L                          0x130120
 852 /* [R 4] Debug: [3] - attention write done message is pending (0-no pending;
 853  * 1-pending). [2:0] = PFID. Pending means attention message was sent; but
 854  * write done didn't receive. */
 855 #define IGU_REG_ATTN_WRITE_DONE_PENDING                  0x130030
 856 #define IGU_REG_BLOCK_CONFIGURATION                              0x130000
 857 #define IGU_REG_COMMAND_REG_32LSB_DATA                           0x130124
 858 #define IGU_REG_COMMAND_REG_CTRL                                 0x13012c
 859 /* [WB_R 32] Cleanup bit status per SB. 1 = cleanup is set. 0 = cleanup bit
 860  * is clear. The bits in this registers are set and clear via the producer
 861  * command. Data valid only in addresses 0-4. all the rest are zero. */
 862 #define IGU_REG_CSTORM_TYPE_0_SB_CLEANUP                         0x130200
 863 /* [R 5] Debug: ctrl_fsm */
 864 #define IGU_REG_CTRL_FSM                                         0x130064
 865 /* [R 1] data available for error memory. If this bit is clear do not red
 866  * from error_handling_memory. */
 867 #define IGU_REG_ERROR_HANDLING_DATA_VALID                        0x130130
 868 /* [RW 11] Parity mask register #0 read/write */
 869 #define IGU_REG_IGU_PRTY_MASK                                    0x1300a8
 870 /* [R 11] Parity register #0 read */
 871 #define IGU_REG_IGU_PRTY_STS                                     0x13009c
 872 /* [RC 11] Parity register #0 read clear */
 873 #define IGU_REG_IGU_PRTY_STS_CLR                                 0x1300a0
 874 /* [R 4] Debug: int_handle_fsm */
 875 #define IGU_REG_INT_HANDLE_FSM                                   0x130050
 876 #define IGU_REG_LEADING_EDGE_LATCH                               0x130134
 877 /* [RW 14] mapping CAM; relevant for E2 operating mode only. [0] - valid.
 878  * [6:1] - vector number; [13:7] - FID (if VF - [13] = 0; [12:7] = VF
 879  * number; if PF - [13] = 1; [12:10] = 0; [9:7] = PF number); */
 880 #define IGU_REG_MAPPING_MEMORY                                   0x131000
 881 #define IGU_REG_MAPPING_MEMORY_SIZE                              136
 882 #define IGU_REG_PBA_STATUS_LSB                                   0x130138
 883 #define IGU_REG_PBA_STATUS_MSB                                   0x13013c
 884 #define IGU_REG_PCI_PF_MSI_EN                                    0x130140
 885 #define IGU_REG_PCI_PF_MSIX_EN                                   0x130144
 886 #define IGU_REG_PCI_PF_MSIX_FUNC_MASK                            0x130148
 887 /* [WB_R 32] Each bit represent the pending bits status for that SB. 0 = no
 888  * pending; 1 = pending. Pendings means interrupt was asserted; and write
 889  * done was not received. Data valid only in addresses 0-4. all the rest are
 890  * zero. */
 891 #define IGU_REG_PENDING_BITS_STATUS                              0x130300
 892 #define IGU_REG_PF_CONFIGURATION                                 0x130154
 893 /* [RW 20] producers only. E2 mode: address 0-135 match to the mapping
 894  * memory; 136 - PF0 default prod; 137 PF1 default prod; 138 - PF2 default
 895  * prod; 139 PF3 default prod; 140 - PF0 - ATTN prod; 141 - PF1 - ATTN prod;
 896  * 142 - PF2 - ATTN prod; 143 - PF3 - ATTN prod; 144-147 reserved. E1.5 mode
 897  * - In backward compatible mode; for non default SB; each even line in the
 898  * memory holds the U producer and each odd line hold the C producer. The
 899  * first 128 producer are for NDSB (PF0 - 0-31; PF1 - 32-63 and so on). The
 900  * last 20 producers are for the DSB for each PF. each PF has five segments
 901  * (the order inside each segment is PF0; PF1; PF2; PF3) - 128-131 U prods;
 902  * 132-135 C prods; 136-139 X prods; 140-143 T prods; 144-147 ATTN prods; */
 903 #define IGU_REG_PROD_CONS_MEMORY                                 0x132000
 904 /* [R 3] Debug: pxp_arb_fsm */
 905 #define IGU_REG_PXP_ARB_FSM                                      0x130068
 906 /* [RW 6] Write one for each bit will reset the appropriate memory. When the
 907  * memory reset finished the appropriate bit will be clear. Bit 0 - mapping
 908  * memory; Bit 1 - SB memory; Bit 2 - SB interrupt and mask register; Bit 3
 909  * - MSIX memory; Bit 4 - PBA memory; Bit 5 - statistics; */
 910 #define IGU_REG_RESET_MEMORIES                                   0x130158
 911 /* [R 4] Debug: sb_ctrl_fsm */
 912 #define IGU_REG_SB_CTRL_FSM                                      0x13004c
 913 #define IGU_REG_SB_INT_BEFORE_MASK_LSB                           0x13015c
 914 #define IGU_REG_SB_INT_BEFORE_MASK_MSB                           0x130160
 915 #define IGU_REG_SB_MASK_LSB                                      0x130164
 916 #define IGU_REG_SB_MASK_MSB                                      0x130168
 917 /* [RW 16] Number of command that were dropped without causing an interrupt
 918  * due to: read access for WO BAR address; or write access for RO BAR
 919  * address or any access for reserved address or PCI function error is set
 920  * and address is not MSIX; PBA or cleanup */
 921 #define IGU_REG_SILENT_DROP                                      0x13016c
 922 /* [RW 10] Number of MSI/MSIX/ATTN messages sent for the function: 0-63 -
 923  * number of MSIX messages per VF; 64-67 - number of MSI/MSIX messages per
 924  * PF; 68-71 number of ATTN messages per PF */
 925 #define IGU_REG_STATISTIC_NUM_MESSAGE_SENT                       0x130800
 926 /* [RW 32] Number of cycles the timer mask masking the IGU interrupt when a
 927  * timer mask command arrives. Value must be bigger than 100. */
 928 #define IGU_REG_TIMER_MASKING_VALUE                              0x13003c
 929 #define IGU_REG_TRAILING_EDGE_LATCH                              0x130104
 930 #define IGU_REG_VF_CONFIGURATION                                 0x130170
 931 /* [WB_R 32] Each bit represent write done pending bits status for that SB
 932  * (MSI/MSIX message was sent and write done was not received yet). 0 =
 933  * clear; 1 = set. Data valid only in addresses 0-4. all the rest are zero. */
 934 #define IGU_REG_WRITE_DONE_PENDING                               0x130480
 935 #define MCP_A_REG_MCPR_SCRATCH                                   0x3a0000
 936 #define MCP_REG_MCPR_NVM_ACCESS_ENABLE                           0x86424
 937 #define MCP_REG_MCPR_NVM_ADDR                                    0x8640c
 938 #define MCP_REG_MCPR_NVM_CFG4                                    0x8642c
 939 #define MCP_REG_MCPR_NVM_COMMAND                                 0x86400
 940 #define MCP_REG_MCPR_NVM_READ                                    0x86410
 941 #define MCP_REG_MCPR_NVM_SW_ARB                                  0x86420
 942 #define MCP_REG_MCPR_NVM_WRITE                                   0x86408
 943 #define MCP_REG_MCPR_SCRATCH                                     0xa0000
 944 #define MISC_AEU_GENERAL_MASK_REG_AEU_NIG_CLOSE_MASK             (0x1<<1)
 945 #define MISC_AEU_GENERAL_MASK_REG_AEU_PXP_CLOSE_MASK             (0x1<<0)
 946 /* [R 32] read first 32 bit after inversion of function 0. mapped as
 947    follows: [0] NIG attention for function0; [1] NIG attention for
 948    function1; [2] GPIO1 mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp;
 949    [6] GPIO1 function 1; [7] GPIO2 function 1; [8] GPIO3 function 1; [9]
 950    GPIO4 function 1; [10] PCIE glue/PXP VPD event function0; [11] PCIE
 951    glue/PXP VPD event function1; [12] PCIE glue/PXP Expansion ROM event0;
 952    [13] PCIE glue/PXP Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16]
 953    MSI/X indication for mcp; [17] MSI/X indication for function 1; [18] BRB
 954    Parity error; [19] BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw
 955    interrupt; [22] SRC Parity error; [23] SRC Hw interrupt; [24] TSDM Parity
 956    error; [25] TSDM Hw interrupt; [26] TCM Parity error; [27] TCM Hw
 957    interrupt; [28] TSEMI Parity error; [29] TSEMI Hw interrupt; [30] PBF
 958    Parity error; [31] PBF Hw interrupt; */
 959 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_0                       0xa42c
 960 #define MISC_REG_AEU_AFTER_INVERT_1_FUNC_1                       0xa430
 961 /* [R 32] read first 32 bit after inversion of mcp. mapped as follows: [0]
 962    NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
 963    mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
 964    [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
 965    PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
 966    function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
 967    Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
 968    mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
 969    BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
 970    Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
 971    interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
 972    Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
 973    interrupt; */
 974 #define MISC_REG_AEU_AFTER_INVERT_1_MCP                          0xa434
 975 /* [R 32] read second 32 bit after inversion of function 0. mapped as
 976    follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
 977    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
 978    interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
 979    error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
 980    interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
 981    NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
 982    [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
 983    interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
 984    Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
 985    Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
 986    Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
 987    interrupt; */
 988 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_0                       0xa438
 989 #define MISC_REG_AEU_AFTER_INVERT_2_FUNC_1                       0xa43c
 990 /* [R 32] read second 32 bit after inversion of mcp. mapped as follows: [0]
 991    PBClient Parity error; [1] PBClient Hw interrupt; [2] QM Parity error;
 992    [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw interrupt;
 993    [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9]
 994    XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
 995    DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
 996    error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
 997    PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
 998    [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
 999    [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
1000    [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
1001    [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
1002 #define MISC_REG_AEU_AFTER_INVERT_2_MCP                          0xa440
1003 /* [R 32] read third 32 bit after inversion of function 0. mapped as
1004    follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity
1005    error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error; [5]
1006    PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1007    interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1008    error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1009    Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1010    pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1011    MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1012    SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1013    timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1014    func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1015    attn1; */
1016 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_0                       0xa444
1017 #define MISC_REG_AEU_AFTER_INVERT_3_FUNC_1                       0xa448
1018 /* [R 32] read third 32 bit after inversion of mcp. mapped as follows: [0]
1019    CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP Parity error; [3] PXP
1020    Hw interrupt; [4] PXPpciClockClient Parity error; [5] PXPpciClockClient
1021    Hw interrupt; [6] CFC Parity error; [7] CFC Hw interrupt; [8] CDU Parity
1022    error; [9] CDU Hw interrupt; [10] DMAE Parity error; [11] DMAE Hw
1023    interrupt; [12] IGU (HC) Parity error; [13] IGU (HC) Hw interrupt; [14]
1024    MISC Parity error; [15] MISC Hw interrupt; [16] pxp_misc_mps_attn; [17]
1025    Flash event; [18] SMB event; [19] MCP attn0; [20] MCP attn1; [21] SW
1026    timers attn_1 func0; [22] SW timers attn_2 func0; [23] SW timers attn_3
1027    func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW timers attn_1
1028    func1; [27] SW timers attn_2 func1; [28] SW timers attn_3 func1; [29] SW
1029    timers attn_4 func1; [30] General attn0; [31] General attn1; */
1030 #define MISC_REG_AEU_AFTER_INVERT_3_MCP                          0xa44c
1031 /* [R 32] read fourth 32 bit after inversion of function 0. mapped as
1032    follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1033    General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1034    [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1035    attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1036    [14] General attn16; [15] General attn17; [16] General attn18; [17]
1037    General attn19; [18] General attn20; [19] General attn21; [20] Main power
1038    interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1039    Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1040    Latched timeout attention; [27] GRC Latched reserved access attention;
1041    [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1042    Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1043 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_0                       0xa450
1044 #define MISC_REG_AEU_AFTER_INVERT_4_FUNC_1                       0xa454
1045 /* [R 32] read fourth 32 bit after inversion of mcp. mapped as follows: [0]
1046    General attn2; [1] General attn3; [2] General attn4; [3] General attn5;
1047    [4] General attn6; [5] General attn7; [6] General attn8; [7] General
1048    attn9; [8] General attn10; [9] General attn11; [10] General attn12; [11]
1049    General attn13; [12] General attn14; [13] General attn15; [14] General
1050    attn16; [15] General attn17; [16] General attn18; [17] General attn19;
1051    [18] General attn20; [19] General attn21; [20] Main power interrupt; [21]
1052    RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN Latched attn; [24]
1053    RBCU Latched attn; [25] RBCP Latched attn; [26] GRC Latched timeout
1054    attention; [27] GRC Latched reserved access attention; [28] MCP Latched
1055    rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP Latched
1056    ump_tx_parity; [31] MCP Latched scpad_parity; */
1057 #define MISC_REG_AEU_AFTER_INVERT_4_MCP                          0xa458
1058 /* [R 32] Read fifth 32 bit after inversion of function 0. Mapped as
1059  * follows: [0] PGLUE config_space; [1] PGLUE misc_flr; [2] PGLUE B RBC
1060  * attention [3] PGLUE B RBC parity; [4] ATC attention; [5] ATC parity; [6]
1061  * CNIG attention (reserved); [7] CNIG parity (reserved); [31-8] Reserved; */
1062 #define MISC_REG_AEU_AFTER_INVERT_5_FUNC_0                       0xa700
1063 /* [W 14] write to this register results with the clear of the latched
1064    signals; one in d0 clears RBCR latch; one in d1 clears RBCT latch; one in
1065    d2 clears RBCN latch; one in d3 clears RBCU latch; one in d4 clears RBCP
1066    latch; one in d5 clears GRC Latched timeout attention; one in d6 clears
1067    GRC Latched reserved access attention; one in d7 clears Latched
1068    rom_parity; one in d8 clears Latched ump_rx_parity; one in d9 clears
1069    Latched ump_tx_parity; one in d10 clears Latched scpad_parity (both
1070    ports); one in d11 clears pxpv_misc_mps_attn; one in d12 clears
1071    pxp_misc_exp_rom_attn0; one in d13 clears pxp_misc_exp_rom_attn1; read
1072    from this register return zero */
1073 #define MISC_REG_AEU_CLR_LATCH_SIGNAL                            0xa45c
1074 /* [RW 32] first 32b for enabling the output for function 0 output0. mapped
1075    as follows: [0] NIG attention for function0; [1] NIG attention for
1076    function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
1077    0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1078    GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1079    function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1080    Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1081    SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1082    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1083    [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1084    SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1085    TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1086    TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1087 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_0                        0xa06c
1088 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_1                        0xa07c
1089 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_2                        0xa08c
1090 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_3                        0xa09c
1091 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_5                        0xa0bc
1092 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_6                        0xa0cc
1093 #define MISC_REG_AEU_ENABLE1_FUNC_0_OUT_7                        0xa0dc
1094 /* [RW 32] first 32b for enabling the output for function 1 output0. mapped
1095    as follows: [0] NIG attention for function0; [1] NIG attention for
1096    function1; [2] GPIO1 function 1; [3] GPIO2 function 1; [4] GPIO3 function
1097    1; [5] GPIO4 function 1; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1098    GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1099    function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1100    Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1101    SPIO4; [15] SPIO5; [16] MSI/X indication for function 1; [17] MSI/X
1102    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1103    [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1104    SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1105    TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1106    TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1107 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_0                        0xa10c
1108 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_1                        0xa11c
1109 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_2                        0xa12c
1110 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_3                        0xa13c
1111 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_5                        0xa15c
1112 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_6                        0xa16c
1113 #define MISC_REG_AEU_ENABLE1_FUNC_1_OUT_7                        0xa17c
1114 /* [RW 32] first 32b for enabling the output for close the gate nig. mapped
1115    as follows: [0] NIG attention for function0; [1] NIG attention for
1116    function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
1117    0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1118    GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1119    function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1120    Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1121    SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1122    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1123    [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1124    SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1125    TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1126    TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1127 #define MISC_REG_AEU_ENABLE1_NIG_0                               0xa0ec
1128 #define MISC_REG_AEU_ENABLE1_NIG_1                               0xa18c
1129 /* [RW 32] first 32b for enabling the output for close the gate pxp. mapped
1130    as follows: [0] NIG attention for function0; [1] NIG attention for
1131    function1; [2] GPIO1 function 0; [3] GPIO2 function 0; [4] GPIO3 function
1132    0; [5] GPIO4 function 0; [6] GPIO1 function 1; [7] GPIO2 function 1; [8]
1133    GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1134    function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1135    Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1136    SPIO4; [15] SPIO5; [16] MSI/X indication for function 0; [17] MSI/X
1137    indication for function 1; [18] BRB Parity error; [19] BRB Hw interrupt;
1138    [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23]
1139    SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26]
1140    TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29]
1141    TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1142 #define MISC_REG_AEU_ENABLE1_PXP_0                               0xa0fc
1143 #define MISC_REG_AEU_ENABLE1_PXP_1                               0xa19c
1144 /* [RW 32] second 32b for enabling the output for function 0 output0. mapped
1145    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1146    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1147    interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1148    error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1149    interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1150    NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1151    [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1152    interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1153    Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1154    Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1155    Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1156    interrupt; */
1157 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_0                        0xa070
1158 #define MISC_REG_AEU_ENABLE2_FUNC_0_OUT_1                        0xa080
1159 /* [RW 32] second 32b for enabling the output for function 1 output0. mapped
1160    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1161    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1162    interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1163    error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1164    interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1165    NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1166    [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1167    interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1168    Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1169    Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1170    Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1171    interrupt; */
1172 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_0                        0xa110
1173 #define MISC_REG_AEU_ENABLE2_FUNC_1_OUT_1                        0xa120
1174 /* [RW 32] second 32b for enabling the output for close the gate nig. mapped
1175    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1176    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1177    interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1178    error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1179    interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1180    NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1181    [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1182    interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1183    Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1184    Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1185    Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1186    interrupt; */
1187 #define MISC_REG_AEU_ENABLE2_NIG_0                               0xa0f0
1188 #define MISC_REG_AEU_ENABLE2_NIG_1                               0xa190
1189 /* [RW 32] second 32b for enabling the output for close the gate pxp. mapped
1190    as follows: [0] PBClient Parity error; [1] PBClient Hw interrupt; [2] QM
1191    Parity error; [3] QM Hw interrupt; [4] Timers Parity error; [5] Timers Hw
1192    interrupt; [6] XSDM Parity error; [7] XSDM Hw interrupt; [8] XCM Parity
1193    error; [9] XCM Hw interrupt; [10] XSEMI Parity error; [11] XSEMI Hw
1194    interrupt; [12] DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14]
1195    NIG Parity error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error;
1196    [17] Vaux PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw
1197    interrupt; [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM
1198    Parity error; [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI
1199    Hw interrupt; [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM
1200    Parity error; [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw
1201    interrupt; */
1202 #define MISC_REG_AEU_ENABLE2_PXP_0                               0xa100
1203 #define MISC_REG_AEU_ENABLE2_PXP_1                               0xa1a0
1204 /* [RW 32] third 32b for enabling the output for function 0 output0. mapped
1205    as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1206    Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1207    [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1208    interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1209    error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1210    Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1211    pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1212    MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1213    SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1214    timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1215    func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1216    attn1; */
1217 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_0                        0xa074
1218 #define MISC_REG_AEU_ENABLE3_FUNC_0_OUT_1                        0xa084
1219 /* [RW 32] third 32b for enabling the output for function 1 output0. mapped
1220    as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1221    Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1222    [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1223    interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1224    error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1225    Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1226    pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1227    MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1228    SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1229    timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1230    func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1231    attn1; */
1232 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_0                        0xa114
1233 #define MISC_REG_AEU_ENABLE3_FUNC_1_OUT_1                        0xa124
1234 /* [RW 32] third 32b for enabling the output for close the gate nig. mapped
1235    as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1236    Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1237    [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1238    interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1239    error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1240    Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1241    pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1242    MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1243    SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1244    timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1245    func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1246    attn1; */
1247 #define MISC_REG_AEU_ENABLE3_NIG_0                               0xa0f4
1248 #define MISC_REG_AEU_ENABLE3_NIG_1                               0xa194
1249 /* [RW 32] third 32b for enabling the output for close the gate pxp. mapped
1250    as follows: [0] CSEMI Parity error; [1] CSEMI Hw interrupt; [2] PXP
1251    Parity error; [3] PXP Hw interrupt; [4] PXPpciClockClient Parity error;
1252    [5] PXPpciClockClient Hw interrupt; [6] CFC Parity error; [7] CFC Hw
1253    interrupt; [8] CDU Parity error; [9] CDU Hw interrupt; [10] DMAE Parity
1254    error; [11] DMAE Hw interrupt; [12] IGU (HC) Parity error; [13] IGU (HC)
1255    Hw interrupt; [14] MISC Parity error; [15] MISC Hw interrupt; [16]
1256    pxp_misc_mps_attn; [17] Flash event; [18] SMB event; [19] MCP attn0; [20]
1257    MCP attn1; [21] SW timers attn_1 func0; [22] SW timers attn_2 func0; [23]
1258    SW timers attn_3 func0; [24] SW timers attn_4 func0; [25] PERST; [26] SW
1259    timers attn_1 func1; [27] SW timers attn_2 func1; [28] SW timers attn_3
1260    func1; [29] SW timers attn_4 func1; [30] General attn0; [31] General
1261    attn1; */
1262 #define MISC_REG_AEU_ENABLE3_PXP_0                               0xa104
1263 #define MISC_REG_AEU_ENABLE3_PXP_1                               0xa1a4
1264 /* [RW 32] fourth 32b for enabling the output for function 0 output0.mapped
1265    as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1266    General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1267    [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1268    attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1269    [14] General attn16; [15] General attn17; [16] General attn18; [17]
1270    General attn19; [18] General attn20; [19] General attn21; [20] Main power
1271    interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1272    Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1273    Latched timeout attention; [27] GRC Latched reserved access attention;
1274    [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1275    Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1276 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_0                        0xa078
1277 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_2                        0xa098
1278 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_4                        0xa0b8
1279 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_5                        0xa0c8
1280 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_6                        0xa0d8
1281 #define MISC_REG_AEU_ENABLE4_FUNC_0_OUT_7                        0xa0e8
1282 /* [RW 32] fourth 32b for enabling the output for function 1 output0.mapped
1283    as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1284    General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1285    [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1286    attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1287    [14] General attn16; [15] General attn17; [16] General attn18; [17]
1288    General attn19; [18] General attn20; [19] General attn21; [20] Main power
1289    interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1290    Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1291    Latched timeout attention; [27] GRC Latched reserved access attention;
1292    [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1293    Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1294 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_0                        0xa118
1295 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_2                        0xa138
1296 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_4                        0xa158
1297 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_5                        0xa168
1298 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_6                        0xa178
1299 #define MISC_REG_AEU_ENABLE4_FUNC_1_OUT_7                        0xa188
1300 /* [RW 32] fourth 32b for enabling the output for close the gate nig.mapped
1301    as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1302    General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1303    [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1304    attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1305    [14] General attn16; [15] General attn17; [16] General attn18; [17]
1306    General attn19; [18] General attn20; [19] General attn21; [20] Main power
1307    interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1308    Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1309    Latched timeout attention; [27] GRC Latched reserved access attention;
1310    [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1311    Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1312 #define MISC_REG_AEU_ENABLE4_NIG_0                               0xa0f8
1313 #define MISC_REG_AEU_ENABLE4_NIG_1                               0xa198
1314 /* [RW 32] fourth 32b for enabling the output for close the gate pxp.mapped
1315    as follows: [0] General attn2; [1] General attn3; [2] General attn4; [3]
1316    General attn5; [4] General attn6; [5] General attn7; [6] General attn8;
1317    [7] General attn9; [8] General attn10; [9] General attn11; [10] General
1318    attn12; [11] General attn13; [12] General attn14; [13] General attn15;
1319    [14] General attn16; [15] General attn17; [16] General attn18; [17]
1320    General attn19; [18] General attn20; [19] General attn21; [20] Main power
1321    interrupt; [21] RBCR Latched attn; [22] RBCT Latched attn; [23] RBCN
1322    Latched attn; [24] RBCU Latched attn; [25] RBCP Latched attn; [26] GRC
1323    Latched timeout attention; [27] GRC Latched reserved access attention;
1324    [28] MCP Latched rom_parity; [29] MCP Latched ump_rx_parity; [30] MCP
1325    Latched ump_tx_parity; [31] MCP Latched scpad_parity; */
1326 #define MISC_REG_AEU_ENABLE4_PXP_0                               0xa108
1327 #define MISC_REG_AEU_ENABLE4_PXP_1                               0xa1a8
1328 /* [RW 1] set/clr general attention 0; this will set/clr bit 94 in the aeu
1329    128 bit vector */
1330 #define MISC_REG_AEU_GENERAL_ATTN_0                              0xa000
1331 #define MISC_REG_AEU_GENERAL_ATTN_1                              0xa004
1332 #define MISC_REG_AEU_GENERAL_ATTN_10                             0xa028
1333 #define MISC_REG_AEU_GENERAL_ATTN_11                             0xa02c
1334 #define MISC_REG_AEU_GENERAL_ATTN_12                             0xa030
1335 #define MISC_REG_AEU_GENERAL_ATTN_2                              0xa008
1336 #define MISC_REG_AEU_GENERAL_ATTN_3                              0xa00c
1337 #define MISC_REG_AEU_GENERAL_ATTN_4                              0xa010
1338 #define MISC_REG_AEU_GENERAL_ATTN_5                              0xa014
1339 #define MISC_REG_AEU_GENERAL_ATTN_6                              0xa018
1340 #define MISC_REG_AEU_GENERAL_ATTN_7                              0xa01c
1341 #define MISC_REG_AEU_GENERAL_ATTN_8                              0xa020
1342 #define MISC_REG_AEU_GENERAL_ATTN_9                              0xa024
1343 #define MISC_REG_AEU_GENERAL_MASK                                0xa61c
1344 /* [RW 32] first 32b for inverting the input for function 0; for each bit:
1345    0= do not invert; 1= invert; mapped as follows: [0] NIG attention for
1346    function0; [1] NIG attention for function1; [2] GPIO1 mcp; [3] GPIO2 mcp;
1347    [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1; [7] GPIO2 function 1;
1348    [8] GPIO3 function 1; [9] GPIO4 function 1; [10] PCIE glue/PXP VPD event
1349    function0; [11] PCIE glue/PXP VPD event function1; [12] PCIE glue/PXP
1350    Expansion ROM event0; [13] PCIE glue/PXP Expansion ROM event1; [14]
1351    SPIO4; [15] SPIO5; [16] MSI/X indication for mcp; [17] MSI/X indication
1352    for function 1; [18] BRB Parity error; [19] BRB Hw interrupt; [20] PRS
1353    Parity error; [21] PRS Hw interrupt; [22] SRC Parity error; [23] SRC Hw
1354    interrupt; [24] TSDM Parity error; [25] TSDM Hw interrupt; [26] TCM
1355    Parity error; [27] TCM Hw interrupt; [28] TSEMI Parity error; [29] TSEMI
1356    Hw interrupt; [30] PBF Parity error; [31] PBF Hw interrupt; */
1357 #define MISC_REG_AEU_INVERTER_1_FUNC_0                           0xa22c
1358 #define MISC_REG_AEU_INVERTER_1_FUNC_1                           0xa23c
1359 /* [RW 32] second 32b for inverting the input for function 0; for each bit:
1360    0= do not invert; 1= invert. mapped as follows: [0] PBClient Parity
1361    error; [1] PBClient Hw interrupt; [2] QM Parity error; [3] QM Hw
1362    interrupt; [4] Timers Parity error; [5] Timers Hw interrupt; [6] XSDM
1363    Parity error; [7] XSDM Hw interrupt; [8] XCM Parity error; [9] XCM Hw
1364    interrupt; [10] XSEMI Parity error; [11] XSEMI Hw interrupt; [12]
1365    DoorbellQ Parity error; [13] DoorbellQ Hw interrupt; [14] NIG Parity
1366    error; [15] NIG Hw interrupt; [16] Vaux PCI core Parity error; [17] Vaux
1367    PCI core Hw interrupt; [18] Debug Parity error; [19] Debug Hw interrupt;
1368    [20] USDM Parity error; [21] USDM Hw interrupt; [22] UCM Parity error;
1369    [23] UCM Hw interrupt; [24] USEMI Parity error; [25] USEMI Hw interrupt;
1370    [26] UPB Parity error; [27] UPB Hw interrupt; [28] CSDM Parity error;
1371    [29] CSDM Hw interrupt; [30] CCM Parity error; [31] CCM Hw interrupt; */
1372 #define MISC_REG_AEU_INVERTER_2_FUNC_0                           0xa230
1373 #define MISC_REG_AEU_INVERTER_2_FUNC_1                           0xa240
1374 /* [RW 10] [7:0] = mask 8 attention output signals toward IGU function0;
1375    [9:8] = raserved. Zero = mask; one = unmask */
1376 #define MISC_REG_AEU_MASK_ATTN_FUNC_0                            0xa060
1377 #define MISC_REG_AEU_MASK_ATTN_FUNC_1                            0xa064
1378 /* [RW 1] If set a system kill occurred */
1379 #define MISC_REG_AEU_SYS_KILL_OCCURRED                           0xa610
1380 /* [RW 32] Represent the status of the input vector to the AEU when a system
1381    kill occurred. The register is reset in por reset. Mapped as follows: [0]
1382    NIG attention for function0; [1] NIG attention for function1; [2] GPIO1
1383    mcp; [3] GPIO2 mcp; [4] GPIO3 mcp; [5] GPIO4 mcp; [6] GPIO1 function 1;
1384    [7] GPIO2 function 1; [8] GPIO3 function 1; [9] GPIO4 function 1; [10]
1385    PCIE glue/PXP VPD event function0; [11] PCIE glue/PXP VPD event
1386    function1; [12] PCIE glue/PXP Expansion ROM event0; [13] PCIE glue/PXP
1387    Expansion ROM event1; [14] SPIO4; [15] SPIO5; [16] MSI/X indication for
1388    mcp; [17] MSI/X indication for function 1; [18] BRB Parity error; [19]
1389    BRB Hw interrupt; [20] PRS Parity error; [21] PRS Hw interrupt; [22] SRC
1390    Parity error; [23] SRC Hw interrupt; [24] TSDM Parity error; [25] TSDM Hw
1391    interrupt; [26] TCM Parity error; [27] TCM Hw interrupt; [28] TSEMI
1392    Parity error; [29] TSEMI Hw interrupt; [30] PBF Parity error; [31] PBF Hw
1393    interrupt; */
1394 #define MISC_REG_AEU_SYS_KILL_STATUS_0                           0xa600
1395 #define MISC_REG_AEU_SYS_KILL_STATUS_1                           0xa604
1396 #define MISC_REG_AEU_SYS_KILL_STATUS_2                           0xa608
1397 #define MISC_REG_AEU_SYS_KILL_STATUS_3                           0xa60c
1398 /* [R 4] This field indicates the type of the device. '0' - 2 Ports; '1' - 1
1399    Port. */
1400 #define MISC_REG_BOND_ID                                         0xa400
1401 /* [R 8] These bits indicate the metal revision of the chip. This value
1402    starts at 0x00 for each all-layer tape-out and increments by one for each
1403    tape-out. */
1404 #define MISC_REG_CHIP_METAL                                      0xa404
1405 /* [R 16] These bits indicate the part number for the chip. */
1406 #define MISC_REG_CHIP_NUM                                        0xa408
1407 /* [R 4] These bits indicate the base revision of the chip. This value
1408    starts at 0x0 for the A0 tape-out and increments by one for each
1409    all-layer tape-out. */
1410 #define MISC_REG_CHIP_REV                                        0xa40c
1411 /* [RW 32] The following driver registers(1...16) represent 16 drivers and
1412    32 clients. Each client can be controlled by one driver only. One in each
1413    bit represent that this driver control the appropriate client (Ex: bit 5
1414    is set means this driver control client number 5). addr1 = set; addr0 =
1415    clear; read from both addresses will give the same result = status. write
1416    to address 1 will set a request to control all the clients that their
1417    appropriate bit (in the write command) is set. if the client is free (the
1418    appropriate bit in all the other drivers is clear) one will be written to
1419    that driver register; if the client isn't free the bit will remain zero.
1420    if the appropriate bit is set (the driver request to gain control on a
1421    client it already controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW
1422    interrupt will be asserted). write to address 0 will set a request to
1423    free all the clients that their appropriate bit (in the write command) is
1424    set. if the appropriate bit is clear (the driver request to free a client
1425    it doesn't controls the ~MISC_REGISTERS_INT_STS.GENERIC_SW interrupt will
1426    be asserted). */
1427 #define MISC_REG_DRIVER_CONTROL_1                                0xa510
1428 #define MISC_REG_DRIVER_CONTROL_7                                0xa3c8
1429 /* [RW 1] e1hmf for WOL. If clr WOL signal o the PXP will be send on bit 0
1430    only. */
1431 #define MISC_REG_E1HMF_MODE                                      0xa5f8
1432 /* [RW 32] Debug only: spare RW register reset by core reset */
1433 #define MISC_REG_GENERIC_CR_0                                    0xa460
1434 #define MISC_REG_GENERIC_CR_1                                    0xa464
1435 /* [RW 32] Debug only: spare RW register reset by por reset */
1436 #define MISC_REG_GENERIC_POR_1                                   0xa474
1437 /* [RW 32] GPIO. [31-28] FLOAT port 0; [27-24] FLOAT port 0; When any of
1438    these bits is written as a '1'; the corresponding SPIO bit will turn off
1439    it's drivers and become an input. This is the reset state of all GPIO
1440    pins. The read value of these bits will be a '1' if that last command
1441    (#SET; #CLR; or #FLOAT) for this bit was a #FLOAT. (reset value 0xff).
1442    [23-20] CLR port 1; 19-16] CLR port 0; When any of these bits is written
1443    as a '1'; the corresponding GPIO bit will drive low. The read value of
1444    these bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for
1445    this bit was a #CLR. (reset value 0). [15-12] SET port 1; 11-8] port 0;
1446    SET When any of these bits is written as a '1'; the corresponding GPIO
1447    bit will drive high (if it has that capability). The read value of these
1448    bits will be a '1' if that last command (#SET; #CLR; or #FLOAT) for this
1449    bit was a #SET. (reset value 0). [7-4] VALUE port 1; [3-0] VALUE port 0;
1450    RO; These bits indicate the read value of each of the eight GPIO pins.
1451    This is the result value of the pin; not the drive value. Writing these
1452    bits will have not effect. */
1453 #define MISC_REG_GPIO                                            0xa490
1454 /* [RW 8] These bits enable the GPIO_INTs to signals event to the
1455    IGU/MCP.according to the following map: [0] p0_gpio_0; [1] p0_gpio_1; [2]
1456    p0_gpio_2; [3] p0_gpio_3; [4] p1_gpio_0; [5] p1_gpio_1; [6] p1_gpio_2;
1457    [7] p1_gpio_3; */
1458 #define MISC_REG_GPIO_EVENT_EN                                   0xa2bc
1459 /* [RW 32] GPIO INT. [31-28] OLD_CLR port1; [27-24] OLD_CLR port0; Writing a
1460    '1' to these bit clears the corresponding bit in the #OLD_VALUE register.
1461    This will acknowledge an interrupt on the falling edge of corresponding
1462    GPIO input (reset value 0). [23-16] OLD_SET [23-16] port1; OLD_SET port0;
1463    Writing a '1' to these bit sets the corresponding bit in the #OLD_VALUE
1464    register. This will acknowledge an interrupt on the rising edge of
1465    corresponding SPIO input (reset value 0). [15-12] OLD_VALUE [11-8] port1;
1466    OLD_VALUE port0; RO; These bits indicate the old value of the GPIO input
1467    value. When the ~INT_STATE bit is set; this bit indicates the OLD value
1468    of the pin such that if ~INT_STATE is set and this bit is '0'; then the
1469    interrupt is due to a low to high edge. If ~INT_STATE is set and this bit
1470    is '1'; then the interrupt is due to a high to low edge (reset value 0).
1471    [7-4] INT_STATE port1; [3-0] INT_STATE RO port0; These bits indicate the
1472    current GPIO interrupt state for each GPIO pin. This bit is cleared when
1473    the appropriate #OLD_SET or #OLD_CLR command bit is written. This bit is
1474    set when the GPIO input does not match the current value in #OLD_VALUE
1475    (reset value 0). */
1476 #define MISC_REG_GPIO_INT                                        0xa494
1477 /* [R 28] this field hold the last information that caused reserved
1478    attention. bits [19:0] - address; [22:20] function; [23] reserved;
1479    [27:24] the master that caused the attention - according to the following
1480    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1481    dbu; 8 = dmae */
1482 #define MISC_REG_GRC_RSV_ATTN                                    0xa3c0
1483 /* [R 28] this field hold the last information that caused timeout
1484    attention. bits [19:0] - address; [22:20] function; [23] reserved;
1485    [27:24] the master that caused the attention - according to the following
1486    encodeing:1 = pxp; 2 = mcp; 3 = usdm; 4 = tsdm; 5 = xsdm; 6 = csdm; 7 =
1487    dbu; 8 = dmae */
1488 #define MISC_REG_GRC_TIMEOUT_ATTN                                0xa3c4
1489 /* [RW 1] Setting this bit enables a timer in the GRC block to timeout any
1490    access that does not finish within
1491    ~misc_registers_grc_timout_val.grc_timeout_val cycles. When this bit is
1492    cleared; this timeout is disabled. If this timeout occurs; the GRC shall
1493    assert it attention output. */
1494 #define MISC_REG_GRC_TIMEOUT_EN                                  0xa280
1495 /* [RW 28] 28 LSB of LCPLL first register; reset val = 521. inside order of
1496    the bits is: [2:0] OAC reset value 001) CML output buffer bias control;
1497    111 for +40%; 011 for +20%; 001 for 0%; 000 for -20%. [5:3] Icp_ctrl
1498    (reset value 001) Charge pump current control; 111 for 720u; 011 for
1499    600u; 001 for 480u and 000 for 360u. [7:6] Bias_ctrl (reset value 00)
1500    Global bias control; When bit 7 is high bias current will be 10 0gh; When
1501    bit 6 is high bias will be 100w; Valid values are 00; 10; 01. [10:8]
1502    Pll_observe (reset value 010) Bits to control observability. bit 10 is
1503    for test bias; bit 9 is for test CK; bit 8 is test Vc. [12:11] Vth_ctrl
1504    (reset value 00) Comparator threshold control. 00 for 0.6V; 01 for 0.54V
1505    and 10 for 0.66V. [13] pllSeqStart (reset value 0) Enables VCO tuning
1506    sequencer: 1= sequencer disabled; 0= sequencer enabled (inverted
1507    internally). [14] reserved (reset value 0) Reset for VCO sequencer is
1508    connected to RESET input directly. [15] capRetry_en (reset value 0)
1509    enable retry on cap search failure (inverted). [16] freqMonitor_e (reset
1510    value 0) bit to continuously monitor vco freq (inverted). [17]
1511    freqDetRestart_en (reset value 0) bit to enable restart when not freq
1512    locked (inverted). [18] freqDetRetry_en (reset value 0) bit to enable
1513    retry on freq det failure(inverted). [19] pllForceFdone_en (reset value
1514    0) bit to enable pllForceFdone & pllForceFpass into pllSeq. [20]
1515    pllForceFdone (reset value 0) bit to force freqDone. [21] pllForceFpass
1516    (reset value 0) bit to force freqPass. [22] pllForceDone_en (reset value
1517    0) bit to enable pllForceCapDone. [23] pllForceCapDone (reset value 0)
1518    bit to force capDone. [24] pllForceCapPass_en (reset value 0) bit to
1519    enable pllForceCapPass. [25] pllForceCapPass (reset value 0) bit to force
1520    capPass. [26] capRestart (reset value 0) bit to force cap sequencer to
1521    restart. [27] capSelectM_en (reset value 0) bit to enable cap select
1522    register bits. */
1523 #define MISC_REG_LCPLL_CTRL_1                                    0xa2a4
1524 #define MISC_REG_LCPLL_CTRL_REG_2                                0xa2a8
1525 /* [RW 4] Interrupt mask register #0 read/write */
1526 #define MISC_REG_MISC_INT_MASK                                   0xa388
1527 /* [RW 1] Parity mask register #0 read/write */
1528 #define MISC_REG_MISC_PRTY_MASK                                  0xa398
1529 /* [R 1] Parity register #0 read */
1530 #define MISC_REG_MISC_PRTY_STS                                   0xa38c
1531 /* [RC 1] Parity register #0 read clear */
1532 #define MISC_REG_MISC_PRTY_STS_CLR                               0xa390
1533 #define MISC_REG_NIG_WOL_P0                                      0xa270
1534 #define MISC_REG_NIG_WOL_P1                                      0xa274
1535 /* [R 1] If set indicate that the pcie_rst_b was asserted without perst
1536    assertion */
1537 #define MISC_REG_PCIE_HOT_RESET                                  0xa618
1538 /* [RW 32] 32 LSB of storm PLL first register; reset val = 0x 071d2911.
1539    inside order of the bits is: [0] P1 divider[0] (reset value 1); [1] P1
1540    divider[1] (reset value 0); [2] P1 divider[2] (reset value 0); [3] P1
1541    divider[3] (reset value 0); [4] P2 divider[0] (reset value 1); [5] P2
1542    divider[1] (reset value 0); [6] P2 divider[2] (reset value 0); [7] P2
1543    divider[3] (reset value 0); [8] ph_det_dis (reset value 1); [9]
1544    freq_det_dis (reset value 0); [10] Icpx[0] (reset value 0); [11] Icpx[1]
1545    (reset value 1); [12] Icpx[2] (reset value 0); [13] Icpx[3] (reset value
1546    1); [14] Icpx[4] (reset value 0); [15] Icpx[5] (reset value 0); [16]
1547    Rx[0] (reset value 1); [17] Rx[1] (reset value 0); [18] vc_en (reset
1548    value 1); [19] vco_rng[0] (reset value 1); [20] vco_rng[1] (reset value
1549    1); [21] Kvco_xf[0] (reset value 0); [22] Kvco_xf[1] (reset value 0);
1550    [23] Kvco_xf[2] (reset value 0); [24] Kvco_xs[0] (reset value 1); [25]
1551    Kvco_xs[1] (reset value 1); [26] Kvco_xs[2] (reset value 1); [27]
1552    testd_en (reset value 0); [28] testd_sel[0] (reset value 0); [29]
1553    testd_sel[1] (reset value 0); [30] testd_sel[2] (reset value 0); [31]
1554    testa_en (reset value 0); */
1555 #define MISC_REG_PLL_STORM_CTRL_1                                0xa294
1556 #define MISC_REG_PLL_STORM_CTRL_2                                0xa298
1557 #define MISC_REG_PLL_STORM_CTRL_3                                0xa29c
1558 #define MISC_REG_PLL_STORM_CTRL_4                                0xa2a0
1559 /* [R 1] Status of 4 port mode enable input pin. */
1560 #define MISC_REG_PORT4MODE_EN                                    0xa750
1561 /* [RW 2] 4 port mode enable overwrite.[0] - Overwrite control; if it is 0 -
1562  * the port4mode_en output is equal to 4 port mode input pin; if it is 1 -
1563  * the port4mode_en output is equal to bit[1] of this register; [1] -
1564  * Overwrite value. If bit[0] of this register is 1 this is the value that
1565  * receives the port4mode_en output . */
1566 #define MISC_REG_PORT4MODE_EN_OVWR                               0xa720
1567 /* [RW 32] reset reg#2; rite/read one = the specific block is out of reset;
1568    write/read zero = the specific block is in reset; addr 0-wr- the write
1569    value will be written to the register; addr 1-set - one will be written
1570    to all the bits that have the value of one in the data written (bits that
1571    have the value of zero will not be change) ; addr 2-clear - zero will be
1572    written to all the bits that have the value of one in the data written
1573    (bits that have the value of zero will not be change); addr 3-ignore;
1574    read ignore from all addr except addr 00; inside order of the bits is:
1575    [0] rst_bmac0; [1] rst_bmac1; [2] rst_emac0; [3] rst_emac1; [4] rst_grc;
1576    [5] rst_mcp_n_reset_reg_hard_core; [6] rst_ mcp_n_hard_core_rst_b; [7]
1577    rst_ mcp_n_reset_cmn_cpu; [8] rst_ mcp_n_reset_cmn_core; [9] rst_rbcn;
1578    [10] rst_dbg; [11] rst_misc_core; [12] rst_dbue (UART); [13]
1579    Pci_resetmdio_n; [14] rst_emac0_hard_core; [15] rst_emac1_hard_core; 16]
1580    rst_pxp_rq_rd_wr; 31:17] reserved */
1581 #define MISC_REG_RESET_REG_2                                     0xa590
1582 /* [RW 20] 20 bit GRC address where the scratch-pad of the MCP that is
1583    shared with the driver resides */
1584 #define MISC_REG_SHARED_MEM_ADDR                                 0xa2b4
1585 /* [RW 32] SPIO. [31-24] FLOAT When any of these bits is written as a '1';
1586    the corresponding SPIO bit will turn off it's drivers and become an
1587    input. This is the reset state of all SPIO pins. The read value of these
1588    bits will be a '1' if that last command (#SET; #CL; or #FLOAT) for this
1589    bit was a #FLOAT. (reset value 0xff). [23-16] CLR When any of these bits
1590    is written as a '1'; the corresponding SPIO bit will drive low. The read
1591    value of these bits will be a '1' if that last command (#SET; #CLR; or
1592 #FLOAT) for this bit was a #CLR. (reset value 0). [15-8] SET When any of
1593    these bits is written as a '1'; the corresponding SPIO bit will drive
1594    high (if it has that capability). The read value of these bits will be a
1595    '1' if that last command (#SET; #CLR; or #FLOAT) for this bit was a #SET.
1596    (reset value 0). [7-0] VALUE RO; These bits indicate the read value of
1597    each of the eight SPIO pins. This is the result value of the pin; not the
1598    drive value. Writing these bits will have not effect. Each 8 bits field
1599    is divided as follows: [0] VAUX Enable; when pulsed low; enables supply
1600    from VAUX. (This is an output pin only; the FLOAT field is not applicable
1601    for this pin); [1] VAUX Disable; when pulsed low; disables supply form
1602    VAUX. (This is an output pin only; FLOAT field is not applicable for this
1603    pin); [2] SEL_VAUX_B - Control to power switching logic. Drive low to
1604    select VAUX supply. (This is an output pin only; it is not controlled by
1605    the SET and CLR fields; it is controlled by the Main Power SM; the FLOAT
1606    field is not applicable for this pin; only the VALUE fields is relevant -
1607    it reflects the output value); [3] port swap [4] spio_4; [5] spio_5; [6]
1608    Bit 0 of UMP device ID select; read by UMP firmware; [7] Bit 1 of UMP
1609    device ID select; read by UMP firmware. */
1610 #define MISC_REG_SPIO                                            0xa4fc
1611 /* [RW 8] These bits enable the SPIO_INTs to signals event to the IGU/MC.
1612    according to the following map: [3:0] reserved; [4] spio_4 [5] spio_5;
1613    [7:0] reserved */
1614 #define MISC_REG_SPIO_EVENT_EN                                   0xa2b8
1615 /* [RW 32] SPIO INT. [31-24] OLD_CLR Writing a '1' to these bit clears the
1616    corresponding bit in the #OLD_VALUE register. This will acknowledge an
1617    interrupt on the falling edge of corresponding SPIO input (reset value
1618    0). [23-16] OLD_SET Writing a '1' to these bit sets the corresponding bit
1619    in the #OLD_VALUE register. This will acknowledge an interrupt on the
1620    rising edge of corresponding SPIO input (reset value 0). [15-8] OLD_VALUE
1621    RO; These bits indicate the old value of the SPIO input value. When the
1622    ~INT_STATE bit is set; this bit indicates the OLD value of the pin such
1623    that if ~INT_STATE is set and this bit is '0'; then the interrupt is due
1624    to a low to high edge. If ~INT_STATE is set and this bit is '1'; then the
1625    interrupt is due to a high to low edge (reset value 0). [7-0] INT_STATE
1626    RO; These bits indicate the current SPIO interrupt state for each SPIO
1627    pin. This bit is cleared when the appropriate #OLD_SET or #OLD_CLR
1628    command bit is written. This bit is set when the SPIO input does not
1629    match the current value in #OLD_VALUE (reset value 0). */
1630 #define MISC_REG_SPIO_INT                                        0xa500
1631 /* [RW 32] reload value for counter 4 if reload; the value will be reload if
1632    the counter reached zero and the reload bit
1633    (~misc_registers_sw_timer_cfg_4.sw_timer_cfg_4[1] ) is set */
1634 #define MISC_REG_SW_TIMER_RELOAD_VAL_4                           0xa2fc
1635 /* [RW 32] the value of the counter for sw timers1-8. there are 8 addresses
1636    in this register. address 0 - timer 1; address 1 - timer 2, ...  address 7 -
1637    timer 8 */
1638 #define MISC_REG_SW_TIMER_VAL                                    0xa5c0
1639 /* [RW 1] Set by the MCP to remember if one or more of the drivers is/are
1640    loaded; 0-prepare; -unprepare */
1641 #define MISC_REG_UNPREPARED                                      0xa424
1642 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_BRCST      (0x1<<0)
1643 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_MLCST      (0x1<<1)
1644 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_NO_VLAN    (0x1<<4)
1645 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_UNCST      (0x1<<2)
1646 #define NIG_LLH0_BRB1_DRV_MASK_REG_LLH0_BRB1_DRV_MASK_VLAN       (0x1<<3)
1647 #define NIG_LLH0_XCM_MASK_REG_LLH0_XCM_MASK_BCN                  (0x1<<0)
1648 #define NIG_LLH1_XCM_MASK_REG_LLH1_XCM_MASK_BCN                  (0x1<<0)
1649 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_EMAC0_MISC_MI_INT      (0x1<<0)
1650 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_SERDES0_LINK_STATUS    (0x1<<9)
1651 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK10G          (0x1<<15)
1652 #define NIG_MASK_INTERRUPT_PORT0_REG_MASK_XGXS0_LINK_STATUS      (0xf<<18)
1653 /* [RW 1] Input enable for RX_BMAC0 IF */
1654 #define NIG_REG_BMAC0_IN_EN                                      0x100ac
1655 /* [RW 1] output enable for TX_BMAC0 IF */
1656 #define NIG_REG_BMAC0_OUT_EN                                     0x100e0
1657 /* [RW 1] output enable for TX BMAC pause port 0 IF */
1658 #define NIG_REG_BMAC0_PAUSE_OUT_EN                               0x10110
1659 /* [RW 1] output enable for RX_BMAC0_REGS IF */
1660 #define NIG_REG_BMAC0_REGS_OUT_EN                                0x100e8
1661 /* [RW 1] output enable for RX BRB1 port0 IF */
1662 #define NIG_REG_BRB0_OUT_EN                                      0x100f8
1663 /* [RW 1] Input enable for TX BRB1 pause port 0 IF */
1664 #define NIG_REG_BRB0_PAUSE_IN_EN                                 0x100c4
1665 /* [RW 1] output enable for RX BRB1 port1 IF */
1666 #define NIG_REG_BRB1_OUT_EN                                      0x100fc
1667 /* [RW 1] Input enable for TX BRB1 pause port 1 IF */
1668 #define NIG_REG_BRB1_PAUSE_IN_EN                                 0x100c8
1669 /* [RW 1] output enable for RX BRB1 LP IF */
1670 #define NIG_REG_BRB_LB_OUT_EN                                    0x10100
1671 /* [WB_W 82] Debug packet to LP from RBC; Data spelling:[63:0] data; 64]
1672    error; [67:65]eop_bvalid; [68]eop; [69]sop; [70]port_id; 71]flush;
1673    72:73]-vnic_num; 81:74]-sideband_info */
1674 #define NIG_REG_DEBUG_PACKET_LB                                  0x10800
1675 /* [RW 1] Input enable for TX Debug packet */
1676 #define NIG_REG_EGRESS_DEBUG_IN_EN                               0x100dc
1677 /* [RW 1] If 1 - egress drain mode for port0 is active. In this mode all
1678    packets from PBFare not forwarded to the MAC and just deleted from FIFO.
1679    First packet may be deleted from the middle. And last packet will be
1680    always deleted till the end. */
1681 #define NIG_REG_EGRESS_DRAIN0_MODE                               0x10060
1682 /* [RW 1] Output enable to EMAC0 */
1683 #define NIG_REG_EGRESS_EMAC0_OUT_EN                              0x10120
1684 /* [RW 1] MAC configuration for packets of port0. If 1 - all packet outputs
1685    to emac for port0; other way to bmac for port0 */
1686 #define NIG_REG_EGRESS_EMAC0_PORT                                0x10058
1687 /* [RW 1] Input enable for TX PBF user packet port0 IF */
1688 #define NIG_REG_EGRESS_PBF0_IN_EN                                0x100cc
1689 /* [RW 1] Input enable for TX PBF user packet port1 IF */
1690 #define NIG_REG_EGRESS_PBF1_IN_EN                                0x100d0
1691 /* [RW 1] Input enable for TX UMP management packet port0 IF */
1692 #define NIG_REG_EGRESS_UMP0_IN_EN                                0x100d4
1693 /* [RW 1] Input enable for RX_EMAC0 IF */
1694 #define NIG_REG_EMAC0_IN_EN                                      0x100a4
1695 /* [RW 1] output enable for TX EMAC pause port 0 IF */
1696 #define NIG_REG_EMAC0_PAUSE_OUT_EN                               0x10118
1697 /* [R 1] status from emac0. This bit is set when MDINT from either the
1698    EXT_MDINT pin or from the Copper PHY is driven low. This condition must
1699    be cleared in the attached PHY device that is driving the MINT pin. */
1700 #define NIG_REG_EMAC0_STATUS_MISC_MI_INT                         0x10494
1701 /* [WB 48] This address space contains BMAC0 registers. The BMAC registers
1702    are described in appendix A. In order to access the BMAC0 registers; the
1703    base address; NIG_REGISTERS_INGRESS_BMAC0_MEM; Offset: 0x10c00; should be
1704    added to each BMAC register offset */
1705 #define NIG_REG_INGRESS_BMAC0_MEM                                0x10c00
1706 /* [WB 48] This address space contains BMAC1 registers. The BMAC registers
1707    are described in appendix A. In order to access the BMAC0 registers; the
1708    base address; NIG_REGISTERS_INGRESS_BMAC1_MEM; Offset: 0x11000; should be
1709    added to each BMAC register offset */
1710 #define NIG_REG_INGRESS_BMAC1_MEM                                0x11000
1711 /* [R 1] FIFO empty in EOP descriptor FIFO of LP in NIG_RX_EOP */
1712 #define NIG_REG_INGRESS_EOP_LB_EMPTY                             0x104e0
1713 /* [RW 17] Debug only. RX_EOP_DSCR_lb_FIFO in NIG_RX_EOP. Data
1714    packet_length[13:0]; mac_error[14]; trunc_error[15]; parity[16] */
1715 #define NIG_REG_INGRESS_EOP_LB_FIFO                              0x104e4
1716 /* [RW 27] 0 - must be active for Everest A0; 1- for Everest B0 when latch
1717    logic for interrupts must be used. Enable per bit of interrupt of
1718    ~latch_status.latch_status */
1719 #define NIG_REG_LATCH_BC_0                                       0x16210
1720 /* [RW 27] Latch for each interrupt from Unicore.b[0]
1721    status_emac0_misc_mi_int; b[1] status_emac0_misc_mi_complete;
1722    b[2]status_emac0_misc_cfg_change; b[3]status_emac0_misc_link_status;
1723    b[4]status_emac0_misc_link_change; b[5]status_emac0_misc_attn;
1724    b[6]status_serdes0_mac_crs; b[7]status_serdes0_autoneg_complete;
1725    b[8]status_serdes0_fiber_rxact; b[9]status_serdes0_link_status;
1726    b[10]status_serdes0_mr_page_rx; b[11]status_serdes0_cl73_an_complete;
1727    b[12]status_serdes0_cl73_mr_page_rx; b[13]status_serdes0_rx_sigdet;
1728    b[14]status_xgxs0_remotemdioreq; b[15]status_xgxs0_link10g;
1729    b[16]status_xgxs0_autoneg_complete; b[17]status_xgxs0_fiber_rxact;
1730    b[21:18]status_xgxs0_link_status; b[22]status_xgxs0_mr_page_rx;
1731    b[23]status_xgxs0_cl73_an_complete; b[24]status_xgxs0_cl73_mr_page_rx;
1732    b[25]status_xgxs0_rx_sigdet; b[26]status_xgxs0_mac_crs */
1733 #define NIG_REG_LATCH_STATUS_0                                   0x18000
1734 /* [RW 1] led 10g for port 0 */
1735 #define NIG_REG_LED_10G_P0                                       0x10320
1736 /* [RW 1] led 10g for port 1 */
1737 #define NIG_REG_LED_10G_P1                                       0x10324
1738 /* [RW 1] Port0: This bit is set to enable the use of the
1739    ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 field
1740    defined below. If this bit is cleared; then the blink rate will be about
1741    8Hz. */
1742 #define NIG_REG_LED_CONTROL_BLINK_RATE_ENA_P0                    0x10318
1743 /* [RW 12] Port0: Specifies the period of each blink cycle (on + off) for
1744    Traffic LED in milliseconds. Must be a non-zero value. This 12-bit field
1745    is reset to 0x080; giving a default blink period of approximately 8Hz. */
1746 #define NIG_REG_LED_CONTROL_BLINK_RATE_P0                        0x10310
1747 /* [RW 1] Port0: If set along with the
1748  ~nig_registers_led_control_override_traffic_p0.led_control_override_traffic_p0
1749    bit and ~nig_registers_led_control_traffic_p0.led_control_traffic_p0 LED
1750    bit; the Traffic LED will blink with the blink rate specified in
1751    ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1752    ~nig_registers_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1753    fields. */
1754 #define NIG_REG_LED_CONTROL_BLINK_TRAFFIC_P0                     0x10308
1755 /* [RW 1] Port0: If set overrides hardware control of the Traffic LED. The
1756    Traffic LED will then be controlled via bit ~nig_registers_
1757    led_control_traffic_p0.led_control_traffic_p0 and bit
1758    ~nig_registers_led_control_blink_traffic_p0.led_control_blink_traffic_p0 */
1759 #define NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0                  0x102f8
1760 /* [RW 1] Port0: If set along with the led_control_override_trafic_p0 bit;
1761    turns on the Traffic LED. If the led_control_blink_traffic_p0 bit is also
1762    set; the LED will blink with blink rate specified in
1763    ~nig_registers_led_control_blink_rate_p0.led_control_blink_rate_p0 and
1764    ~nig_regsters_led_control_blink_rate_ena_p0.led_control_blink_rate_ena_p0
1765    fields. */
1766 #define NIG_REG_LED_CONTROL_TRAFFIC_P0                           0x10300
1767 /* [RW 4] led mode for port0: 0 MAC; 1-3 PHY1; 4 MAC2; 5-7 PHY4; 8-MAC3;
1768    9-11PHY7; 12 MAC4; 13-15 PHY10; */
1769 #define NIG_REG_LED_MODE_P0                                      0x102f0
1770 /* [RW 3] for port0 enable for llfc ppp and pause. b0 - brb1 enable; b1-
1771    tsdm enable; b2- usdm enable */
1772 #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_0                         0x16070
1773 #define NIG_REG_LLFC_EGRESS_SRC_ENABLE_1                         0x16074
1774 /* [RW 1] SAFC enable for port0. This register may get 1 only when
1775    ~ppp_enable.ppp_enable = 0 and pause_enable.pause_enable =0 for the same
1776    port */
1777 #define NIG_REG_LLFC_ENABLE_0                                    0x16208
1778 #define NIG_REG_LLFC_ENABLE_1                                    0x1620c
1779 /* [RW 16] classes are high-priority for port0 */
1780 #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_0                     0x16058
1781 #define NIG_REG_LLFC_HIGH_PRIORITY_CLASSES_1                     0x1605c
1782 /* [RW 16] classes are low-priority for port0 */
1783 #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_0                      0x16060
1784 #define NIG_REG_LLFC_LOW_PRIORITY_CLASSES_1                      0x16064
1785 /* [RW 1] Output enable of message to LLFC BMAC IF for port0 */
1786 #define NIG_REG_LLFC_OUT_EN_0                                    0x160c8
1787 #define NIG_REG_LLFC_OUT_EN_1                                    0x160cc
1788 #define NIG_REG_LLH0_ACPI_PAT_0_CRC                              0x1015c
1789 #define NIG_REG_LLH0_ACPI_PAT_6_LEN                              0x10154
1790 #define NIG_REG_LLH0_BRB1_DRV_MASK                               0x10244
1791 #define NIG_REG_LLH0_BRB1_DRV_MASK_MF                            0x16048
1792 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1793 #define NIG_REG_LLH0_BRB1_NOT_MCP                                0x1025c
1794 /* [RW 2] Determine the classification participants. 0: no classification.1:
1795    classification upon VLAN id. 2: classification upon MAC address. 3:
1796    classification upon both VLAN id & MAC addr. */
1797 #define NIG_REG_LLH0_CLS_TYPE                                    0x16080
1798 /* [RW 32] cm header for llh0 */
1799 #define NIG_REG_LLH0_CM_HEADER                                   0x1007c
1800 #define NIG_REG_LLH0_DEST_IP_0_1                                 0x101dc
1801 #define NIG_REG_LLH0_DEST_MAC_0_0                                0x101c0
1802 /* [RW 16] destination TCP address 1. The LLH will look for this address in
1803    all incoming packets. */
1804 #define NIG_REG_LLH0_DEST_TCP_0                                  0x10220
1805 /* [RW 16] destination UDP address 1 The LLH will look for this address in
1806    all incoming packets. */
1807 #define NIG_REG_LLH0_DEST_UDP_0                                  0x10214
1808 #define NIG_REG_LLH0_ERROR_MASK                                  0x1008c
1809 /* [RW 8] event id for llh0 */
1810 #define NIG_REG_LLH0_EVENT_ID                                    0x10084
1811 #define NIG_REG_LLH0_FUNC_EN                                     0x160fc
1812 #define NIG_REG_LLH0_FUNC_MEM                                    0x16180
1813 #define NIG_REG_LLH0_FUNC_MEM_ENABLE                             0x16140
1814 #define NIG_REG_LLH0_FUNC_VLAN_ID                                0x16100
1815 /* [RW 1] Determine the IP version to look for in
1816    ~nig_registers_llh0_dest_ip_0.llh0_dest_ip_0. 0 - IPv6; 1-IPv4 */
1817 #define NIG_REG_LLH0_IPV4_IPV6_0                                 0x10208
1818 /* [RW 1] t bit for llh0 */
1819 #define NIG_REG_LLH0_T_BIT                                       0x10074
1820 /* [RW 12] VLAN ID 1. In case of VLAN packet the LLH will look for this ID. */
1821 #define NIG_REG_LLH0_VLAN_ID_0                                   0x1022c
1822 /* [RW 8] init credit counter for port0 in LLH */
1823 #define NIG_REG_LLH0_XCM_INIT_CREDIT                             0x10554
1824 #define NIG_REG_LLH0_XCM_MASK                                    0x10130
1825 #define NIG_REG_LLH1_BRB1_DRV_MASK                               0x10248
1826 /* [RW 1] send to BRB1 if no match on any of RMP rules. */
1827 #define NIG_REG_LLH1_BRB1_NOT_MCP                                0x102dc
1828 /* [RW 2] Determine the classification participants. 0: no classification.1:
1829    classification upon VLAN id. 2: classification upon MAC address. 3:
1830    classification upon both VLAN id & MAC addr. */
1831 #define NIG_REG_LLH1_CLS_TYPE                                    0x16084
1832 /* [RW 32] cm header for llh1 */
1833 #define NIG_REG_LLH1_CM_HEADER                                   0x10080
1834 #define NIG_REG_LLH1_ERROR_MASK                                  0x10090
1835 /* [RW 8] event id for llh1 */
1836 #define NIG_REG_LLH1_EVENT_ID                                    0x10088
1837 #define NIG_REG_LLH1_FUNC_MEM                                    0x161c0
1838 #define NIG_REG_LLH1_FUNC_MEM_ENABLE                             0x16160
1839 #define NIG_REG_LLH1_FUNC_MEM_SIZE                               16
1840 /* [RW 8] init credit counter for port1 in LLH */
1841 #define NIG_REG_LLH1_XCM_INIT_CREDIT                             0x10564
1842 #define NIG_REG_LLH1_XCM_MASK                                    0x10134
1843 /* [RW 1] When this bit is set; the LLH will expect all packets to be with
1844    e1hov */
1845 #define NIG_REG_LLH_E1HOV_MODE                                   0x160d8
1846 /* [RW 1] When this bit is set; the LLH will classify the packet before
1847    sending it to the BRB or calculating WoL on it. */
1848 #define NIG_REG_LLH_MF_MODE                                      0x16024
1849 #define NIG_REG_MASK_INTERRUPT_PORT0                             0x10330
1850 #define NIG_REG_MASK_INTERRUPT_PORT1                             0x10334
1851 /* [RW 1] Output signal from NIG to EMAC0. When set enables the EMAC0 block. */
1852 #define NIG_REG_NIG_EMAC0_EN                                     0x1003c
1853 /* [RW 1] Output signal from NIG to EMAC1. When set enables the EMAC1 block. */
1854 #define NIG_REG_NIG_EMAC1_EN                                     0x10040
1855 /* [RW 1] Output signal from NIG to TX_EMAC0. When set indicates to the
1856    EMAC0 to strip the CRC from the ingress packets. */
1857 #define NIG_REG_NIG_INGRESS_EMAC0_NO_CRC                         0x10044
1858 /* [R 32] Interrupt register #0 read */
1859 #define NIG_REG_NIG_INT_STS_0                                    0x103b0
1860 #define NIG_REG_NIG_INT_STS_1                                    0x103c0
1861 /* [R 32] Legacy E1 and E1H location for parity error status register. */
1862 #define NIG_REG_NIG_PRTY_STS                                     0x103d0
1863 /* [R 32] Parity register #0 read */
1864 #define NIG_REG_NIG_PRTY_STS_0                                   0x183bc
1865 #define NIG_REG_NIG_PRTY_STS_1                                   0x183cc
1866 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
1867  * Ethernet header. */
1868 #define NIG_REG_P0_HDRS_AFTER_BASIC                              0x18038
1869 /* [RW 1] HW PFC enable bit. Set this bit to enable the PFC functionality in
1870  * the NIG. Other flow control modes such as PAUSE and SAFC/LLFC should be
1871  * disabled when this bit is set. */
1872 #define NIG_REG_P0_HWPFC_ENABLE                          0x18078
1873 #define NIG_REG_P0_LLH_FUNC_MEM2                                 0x18480
1874 #define NIG_REG_P0_LLH_FUNC_MEM2_ENABLE                  0x18440
1875 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
1876  * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
1877  * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
1878  * priority field is extracted from the outer-most VLAN in receive packet.
1879  * Only COS 0 and COS 1 are supported in E2. */
1880 #define NIG_REG_P0_PKT_PRIORITY_TO_COS                           0x18054
1881 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
1882  * priority is mapped to COS 0 when the corresponding mask bit is 1. More
1883  * than one bit may be set; allowing multiple priorities to be mapped to one
1884  * COS. */
1885 #define NIG_REG_P0_RX_COS0_PRIORITY_MASK                         0x18058
1886 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
1887  * priority is mapped to COS 1 when the corresponding mask bit is 1. More
1888  * than one bit may be set; allowing multiple priorities to be mapped to one
1889  * COS. */
1890 #define NIG_REG_P0_RX_COS1_PRIORITY_MASK                         0x1805c
1891 /* [RW 15] Specify which of the credit registers the client is to be mapped
1892  * to. Bits[2:0] are for client 0; bits [14:12] are for client 4. For
1893  * clients that are not subject to WFQ credit blocking - their
1894  * specifications here are not used. */
1895 #define NIG_REG_P0_TX_ARB_CLIENT_CREDIT_MAP                      0x180f0
1896 /* [RW 5] Specify whether the client competes directly in the strict
1897  * priority arbiter. The bits are mapped according to client ID (client IDs
1898  * are defined in tx_arb_priority_client). Default value is set to enable
1899  * strict priorities for clients 0-2 -- management and debug traffic. */
1900 #define NIG_REG_P0_TX_ARB_CLIENT_IS_STRICT                       0x180e8
1901 /* [RW 5] Specify whether the client is subject to WFQ credit blocking. The
1902  * bits are mapped according to client ID (client IDs are defined in
1903  * tx_arb_priority_client). Default value is 0 for not using WFQ credit
1904  * blocking. */
1905 #define NIG_REG_P0_TX_ARB_CLIENT_IS_SUBJECT2WFQ          0x180ec
1906 /* [RW 32] Specify the upper bound that credit register 0 is allowed to
1907  * reach. */
1908 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_0                   0x1810c
1909 #define NIG_REG_P0_TX_ARB_CREDIT_UPPER_BOUND_1                   0x18110
1910 /* [RW 32] Specify the weight (in bytes) to be added to credit register 0
1911  * when it is time to increment. */
1912 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_0                        0x180f8
1913 #define NIG_REG_P0_TX_ARB_CREDIT_WEIGHT_1                        0x180fc
1914 /* [RW 12] Specify the number of strict priority arbitration slots between
1915  * two round-robin arbitration slots to avoid starvation. A value of 0 means
1916  * no strict priority cycles - the strict priority with anti-starvation
1917  * arbiter becomes a round-robin arbiter. */
1918 #define NIG_REG_P0_TX_ARB_NUM_STRICT_ARB_SLOTS                   0x180f4
1919 /* [RW 15] Specify the client number to be assigned to each priority of the
1920  * strict priority arbiter. Priority 0 is the highest priority. Bits [2:0]
1921  * are for priority 0 client; bits [14:12] are for priority 4 client. The
1922  * clients are assigned the following IDs: 0-management; 1-debug traffic
1923  * from this port; 2-debug traffic from other port; 3-COS0 traffic; 4-COS1
1924  * traffic. The reset value[14:0] is set to 0x4688 (15'b100_011_010_001_000)
1925  * for management at priority 0; debug traffic at priorities 1 and 2; COS0
1926  * traffic at priority 3; and COS1 traffic at priority 4. */
1927 #define NIG_REG_P0_TX_ARB_PRIORITY_CLIENT                        0x180e4
1928 #define NIG_REG_P1_LLH_FUNC_MEM2                                 0x184c0
1929 #define NIG_REG_P1_LLH_FUNC_MEM2_ENABLE                  0x18460
1930 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for
1931  * future expansion) each priorty is to be mapped to. Bits 3:0 specify the
1932  * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit
1933  * priority field is extracted from the outer-most VLAN in receive packet.
1934  * Only COS 0 and COS 1 are supported in E2. */
1935 #define NIG_REG_P1_PKT_PRIORITY_TO_COS                           0x181a8
1936 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 0. A
1937  * priority is mapped to COS 0 when the corresponding mask bit is 1. More
1938  * than one bit may be set; allowing multiple priorities to be mapped to one
1939  * COS. */
1940 #define NIG_REG_P1_RX_COS0_PRIORITY_MASK                         0x181ac
1941 /* [RW 16] Bit-map indicating which SAFC/PFC priorities to map to COS 1. A
1942  * priority is mapped to COS 1 when the corresponding mask bit is 1. More
1943  * than one bit may be set; allowing multiple priorities to be mapped to one
1944  * COS. */
1945 #define NIG_REG_P1_RX_COS1_PRIORITY_MASK                         0x181b0
1946 /* [RW 1] Pause enable for port0. This register may get 1 only when
1947    ~safc_enable.safc_enable = 0 and ppp_enable.ppp_enable =0 for the same
1948    port */
1949 #define NIG_REG_PAUSE_ENABLE_0                                   0x160c0
1950 #define NIG_REG_PAUSE_ENABLE_1                                   0x160c4
1951 /* [RW 1] Input enable for RX PBF LP IF */
1952 #define NIG_REG_PBF_LB_IN_EN                                     0x100b4
1953 /* [RW 1] Value of this register will be transmitted to port swap when
1954    ~nig_registers_strap_override.strap_override =1 */
1955 #define NIG_REG_PORT_SWAP                                        0x10394
1956 /* [RW 1] PPP enable for port0. This register may get 1 only when
1957  * ~safc_enable.safc_enable = 0 and pause_enable.pause_enable =0 for the
1958  * same port */
1959 #define NIG_REG_PPP_ENABLE_0                                     0x160b0
1960 #define NIG_REG_PPP_ENABLE_1                                     0x160b4
1961 /* [RW 1] output enable for RX parser descriptor IF */
1962 #define NIG_REG_PRS_EOP_OUT_EN                                   0x10104
1963 /* [RW 1] Input enable for RX parser request IF */
1964 #define NIG_REG_PRS_REQ_IN_EN                                    0x100b8
1965 /* [RW 5] control to serdes - CL45 DEVAD */
1966 #define NIG_REG_SERDES0_CTRL_MD_DEVAD                            0x10370
1967 /* [RW 1] control to serdes; 0 - clause 45; 1 - clause 22 */
1968 #define NIG_REG_SERDES0_CTRL_MD_ST                               0x1036c
1969 /* [RW 5] control to serdes - CL22 PHY_ADD and CL45 PRTAD */
1970 #define NIG_REG_SERDES0_CTRL_PHY_ADDR                            0x10374
1971 /* [R 1] status from serdes0 that inputs to interrupt logic of link status */
1972 #define NIG_REG_SERDES0_STATUS_LINK_STATUS                       0x10578
1973 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1974    for port0 */
1975 #define NIG_REG_STAT0_BRB_DISCARD                                0x105f0
1976 /* [R 32] Rx statistics : In user packets truncated due to BRB backpressure
1977    for port0 */
1978 #define NIG_REG_STAT0_BRB_TRUNCATE                               0x105f8
1979 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1980    between 1024 and 1522 bytes for port0 */
1981 #define NIG_REG_STAT0_EGRESS_MAC_PKT0                            0x10750
1982 /* [WB_R 36] Tx statistics : Number of packets from emac0 or bmac0 that
1983    between 1523 bytes and above for port0 */
1984 #define NIG_REG_STAT0_EGRESS_MAC_PKT1                            0x10760
1985 /* [R 32] Rx statistics : In user packets discarded due to BRB backpressure
1986    for port1 */
1987 #define NIG_REG_STAT1_BRB_DISCARD                                0x10628
1988 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1989    between 1024 and 1522 bytes for port1 */
1990 #define NIG_REG_STAT1_EGRESS_MAC_PKT0                            0x107a0
1991 /* [WB_R 36] Tx statistics : Number of packets from emac1 or bmac1 that
1992    between 1523 bytes and above for port1 */
1993 #define NIG_REG_STAT1_EGRESS_MAC_PKT1                            0x107b0
1994 /* [WB_R 64] Rx statistics : User octets received for LP */
1995 #define NIG_REG_STAT2_BRB_OCTET                                  0x107e0
1996 #define NIG_REG_STATUS_INTERRUPT_PORT0                           0x10328
1997 #define NIG_REG_STATUS_INTERRUPT_PORT1                           0x1032c
1998 /* [RW 1] port swap mux selection. If this register equal to 0 then port
1999    swap is equal to SPIO pin that inputs from ifmux_serdes_swap. If 1 then
2000    ort swap is equal to ~nig_registers_port_swap.port_swap */
2001 #define NIG_REG_STRAP_OVERRIDE                                   0x10398
2002 /* [RW 1] output enable for RX_XCM0 IF */
2003 #define NIG_REG_XCM0_OUT_EN                                      0x100f0
2004 /* [RW 1] output enable for RX_XCM1 IF */
2005 #define NIG_REG_XCM1_OUT_EN                                      0x100f4
2006 /* [RW 1] control to xgxs - remote PHY in-band MDIO */
2007 #define NIG_REG_XGXS0_CTRL_EXTREMOTEMDIOST                       0x10348
2008 /* [RW 5] control to xgxs - CL45 DEVAD */
2009 #define NIG_REG_XGXS0_CTRL_MD_DEVAD                              0x1033c
2010 /* [RW 1] control to xgxs; 0 - clause 45; 1 - clause 22 */
2011 #define NIG_REG_XGXS0_CTRL_MD_ST                                 0x10338
2012 /* [RW 5] control to xgxs - CL22 PHY_ADD and CL45 PRTAD */
2013 #define NIG_REG_XGXS0_CTRL_PHY_ADDR                              0x10340
2014 /* [R 1] status from xgxs0 that inputs to interrupt logic of link10g. */
2015 #define NIG_REG_XGXS0_STATUS_LINK10G                             0x10680
2016 /* [R 4] status from xgxs0 that inputs to interrupt logic of link status */
2017 #define NIG_REG_XGXS0_STATUS_LINK_STATUS                         0x10684
2018 /* [RW 2] selection for XGXS lane of port 0 in NIG_MUX block */
2019 #define NIG_REG_XGXS_LANE_SEL_P0                                 0x102e8
2020 /* [RW 1] selection for port0 for NIG_MUX block : 0 = SerDes; 1 = XGXS */
2021 #define NIG_REG_XGXS_SERDES0_MODE_SEL                            0x102e0
2022 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_EMAC0_MISC_MI_INT  (0x1<<0)
2023 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_SERDES0_LINK_STATUS (0x1<<9)
2024 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK10G      (0x1<<15)
2025 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS  (0xf<<18)
2026 #define NIG_STATUS_INTERRUPT_PORT0_REG_STATUS_XGXS0_LINK_STATUS_SIZE 18
2027 /* [RW 31] The upper bound of the weight of COS0 in the ETS command arbiter. */
2028 #define PBF_REG_COS0_UPPER_BOUND                                 0x15c05c
2029 /* [RW 31] The weight of COS0 in the ETS command arbiter. */
2030 #define PBF_REG_COS0_WEIGHT                                      0x15c054
2031 /* [RW 31] The upper bound of the weight of COS1 in the ETS command arbiter. */
2032 #define PBF_REG_COS1_UPPER_BOUND                                 0x15c060
2033 /* [RW 31] The weight of COS1 in the ETS command arbiter. */
2034 #define PBF_REG_COS1_WEIGHT                                      0x15c058
2035 /* [RW 1] Disable processing further tasks from port 0 (after ending the
2036    current task in process). */
2037 #define PBF_REG_DISABLE_NEW_TASK_PROC_P0                         0x14005c
2038 /* [RW 1] Disable processing further tasks from port 1 (after ending the
2039    current task in process). */
2040 #define PBF_REG_DISABLE_NEW_TASK_PROC_P1                         0x140060
2041 /* [RW 1] Disable processing further tasks from port 4 (after ending the
2042    current task in process). */
2043 #define PBF_REG_DISABLE_NEW_TASK_PROC_P4                         0x14006c
2044 #define PBF_REG_DISABLE_PF                                       0x1402e8
2045 /* [RW 1] Indicates that ETS is performed between the COSes in the command
2046  * arbiter. If reset strict priority w/ anti-starvation will be performed
2047  * w/o WFQ. */
2048 #define PBF_REG_ETS_ENABLED                                      0x15c050
2049 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
2050  * Ethernet header. */
2051 #define PBF_REG_HDRS_AFTER_BASIC                                 0x15c0a8
2052 /* [RW 1] Indicates which COS is conncted to the highest priority in the
2053  * command arbiter. */
2054 #define PBF_REG_HIGH_PRIORITY_COS_NUM                            0x15c04c
2055 #define PBF_REG_IF_ENABLE_REG                                    0x140044
2056 /* [RW 1] Init bit. When set the initial credits are copied to the credit
2057    registers (except the port credits). Should be set and then reset after
2058    the configuration of the block has ended. */
2059 #define PBF_REG_INIT                                             0x140000
2060 /* [RW 1] Init bit for port 0. When set the initial credit of port 0 is
2061    copied to the credit register. Should be set and then reset after the
2062    configuration of the port has ended. */
2063 #define PBF_REG_INIT_P0                                          0x140004
2064 /* [RW 1] Init bit for port 1. When set the initial credit of port 1 is
2065    copied to the credit register. Should be set and then reset after the
2066    configuration of the port has ended. */
2067 #define PBF_REG_INIT_P1                                          0x140008
2068 /* [RW 1] Init bit for port 4. When set the initial credit of port 4 is
2069    copied to the credit register. Should be set and then reset after the
2070    configuration of the port has ended. */
2071 #define PBF_REG_INIT_P4                                          0x14000c
2072 /* [RW 1] Enable for mac interface 0. */
2073 #define PBF_REG_MAC_IF0_ENABLE                                   0x140030
2074 /* [RW 1] Enable for mac interface 1. */
2075 #define PBF_REG_MAC_IF1_ENABLE                                   0x140034
2076 /* [RW 1] Enable for the loopback interface. */
2077 #define PBF_REG_MAC_LB_ENABLE                                    0x140040
2078 /* [RW 6] Bit-map indicating which headers must appear in the packet */
2079 #define PBF_REG_MUST_HAVE_HDRS                                   0x15c0c4
2080 /* [RW 16] The number of strict priority arbitration slots between 2 RR
2081  * arbitration slots. A value of 0 means no strict priority cycles; i.e. the
2082  * strict-priority w/ anti-starvation arbiter is a RR arbiter. */
2083 #define PBF_REG_NUM_STRICT_ARB_SLOTS                             0x15c064
2084 /* [RW 10] Port 0 threshold used by arbiter in 16 byte lines used when pause
2085    not suppoterd. */
2086 #define PBF_REG_P0_ARB_THRSH                                     0x1400e4
2087 /* [R 11] Current credit for port 0 in the tx port buffers in 16 byte lines. */
2088 #define PBF_REG_P0_CREDIT                                        0x140200
2089 /* [RW 11] Initial credit for port 0 in the tx port buffers in 16 byte
2090    lines. */
2091 #define PBF_REG_P0_INIT_CRD                                      0x1400d0
2092 /* [RW 1] Indication that pause is enabled for port 0. */
2093 #define PBF_REG_P0_PAUSE_ENABLE                                  0x140014
2094 /* [R 8] Number of tasks in port 0 task queue. */
2095 #define PBF_REG_P0_TASK_CNT                                      0x140204
2096 /* [R 11] Current credit for port 1 in the tx port buffers in 16 byte lines. */
2097 #define PBF_REG_P1_CREDIT                                        0x140208
2098 /* [RW 11] Initial credit for port 1 in the tx port buffers in 16 byte
2099    lines. */
2100 #define PBF_REG_P1_INIT_CRD                                      0x1400d4
2101 /* [R 8] Number of tasks in port 1 task queue. */
2102 #define PBF_REG_P1_TASK_CNT                                      0x14020c
2103 /* [R 11] Current credit for port 4 in the tx port buffers in 16 byte lines. */
2104 #define PBF_REG_P4_CREDIT                                        0x140210
2105 /* [RW 11] Initial credit for port 4 in the tx port buffers in 16 byte
2106    lines. */
2107 #define PBF_REG_P4_INIT_CRD                                      0x1400e0
2108 /* [R 8] Number of tasks in port 4 task queue. */
2109 #define PBF_REG_P4_TASK_CNT                                      0x140214
2110 /* [RW 5] Interrupt mask register #0 read/write */
2111 #define PBF_REG_PBF_INT_MASK                                     0x1401d4
2112 /* [R 5] Interrupt register #0 read */
2113 #define PBF_REG_PBF_INT_STS                                      0x1401c8
2114 /* [RW 20] Parity mask register #0 read/write */
2115 #define PBF_REG_PBF_PRTY_MASK                                    0x1401e4
2116 /* [RC 20] Parity register #0 read clear */
2117 #define PBF_REG_PBF_PRTY_STS_CLR                                 0x1401dc
2118 #define PB_REG_CONTROL                                           0
2119 /* [RW 2] Interrupt mask register #0 read/write */
2120 #define PB_REG_PB_INT_MASK                                       0x28
2121 /* [R 2] Interrupt register #0 read */
2122 #define PB_REG_PB_INT_STS                                        0x1c
2123 /* [RW 4] Parity mask register #0 read/write */
2124 #define PB_REG_PB_PRTY_MASK                                      0x38
2125 /* [R 4] Parity register #0 read */
2126 #define PB_REG_PB_PRTY_STS                                       0x2c
2127 /* [RC 4] Parity register #0 read clear */
2128 #define PB_REG_PB_PRTY_STS_CLR                                   0x30
2129 #define PGLUE_B_PGLUE_B_INT_STS_REG_ADDRESS_ERROR                (0x1<<0)
2130 #define PGLUE_B_PGLUE_B_INT_STS_REG_CSSNOOP_FIFO_OVERFLOW        (0x1<<8)
2131 #define PGLUE_B_PGLUE_B_INT_STS_REG_INCORRECT_RCV_BEHAVIOR       (0x1<<1)
2132 #define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_ERROR_ATTN              (0x1<<6)
2133 #define PGLUE_B_PGLUE_B_INT_STS_REG_TCPL_IN_TWO_RCBS_ATTN        (0x1<<7)
2134 #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_GRC_SPACE_VIOLATION_ATTN  (0x1<<4)
2135 #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_LENGTH_VIOLATION_ATTN     (0x1<<3)
2136 #define PGLUE_B_PGLUE_B_INT_STS_REG_VF_MSIX_BAR_VIOLATION_ATTN   (0x1<<5)
2137 #define PGLUE_B_PGLUE_B_INT_STS_REG_WAS_ERROR_ATTN               (0x1<<2)
2138 /* [R 8] Config space A attention dirty bits. Each bit indicates that the
2139  * corresponding PF generates config space A attention. Set by PXP. Reset by
2140  * MCP writing 1 to icfg_space_a_request_clr. Note: register contains bits
2141  * from both paths. */
2142 #define PGLUE_B_REG_CFG_SPACE_A_REQUEST                  0x9010
2143 /* [R 8] Config space B attention dirty bits. Each bit indicates that the
2144  * corresponding PF generates config space B attention. Set by PXP. Reset by
2145  * MCP writing 1 to icfg_space_b_request_clr. Note: register contains bits
2146  * from both paths. */
2147 #define PGLUE_B_REG_CFG_SPACE_B_REQUEST                  0x9014
2148 /* [RW 1] Type A PF enable inbound interrupt table for CSDM. 0 - disable; 1
2149  * - enable. */
2150 #define PGLUE_B_REG_CSDM_INB_INT_A_PF_ENABLE                     0x9194
2151 /* [RW 18] Type B VF inbound interrupt table for CSDM: bits[17:9]-mask;
2152  * its[8:0]-address. Bits [1:0] must be zero (DW resolution address). */
2153 #define PGLUE_B_REG_CSDM_INB_INT_B_VF                            0x916c
2154 /* [RW 1] Type B VF enable inbound interrupt table for CSDM. 0 - disable; 1
2155  * - enable. */
2156 #define PGLUE_B_REG_CSDM_INB_INT_B_VF_ENABLE                     0x919c
2157 /* [RW 16] Start offset of CSDM zone A (queue zone) in the internal RAM */
2158 #define PGLUE_B_REG_CSDM_START_OFFSET_A                  0x9100
2159 /* [RW 16] Start offset of CSDM zone B (legacy zone) in the internal RAM */
2160 #define PGLUE_B_REG_CSDM_START_OFFSET_B                  0x9108
2161 /* [RW 5] VF Shift of CSDM zone B (legacy zone) in the internal RAM */
2162 #define PGLUE_B_REG_CSDM_VF_SHIFT_B                              0x9110
2163 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
2164 #define PGLUE_B_REG_CSDM_ZONE_A_SIZE_PF                  0x91ac
2165 /* [R 8] FLR request attention dirty bits for PFs 0 to 7. Each bit indicates
2166  * that the FLR register of the corresponding PF was set. Set by PXP. Reset
2167  * by MCP writing 1 to flr_request_pf_7_0_clr. Note: register contains bits
2168  * from both paths. */
2169 #define PGLUE_B_REG_FLR_REQUEST_PF_7_0                           0x9028
2170 /* [W 8] FLR request attention dirty bits clear for PFs 0 to 7. MCP writes 1
2171  * to a bit in this register in order to clear the corresponding bit in
2172  * flr_request_pf_7_0 register. Note: register contains bits from both
2173  * paths. */
2174 #define PGLUE_B_REG_FLR_REQUEST_PF_7_0_CLR                       0x9418
2175 /* [R 32] FLR request attention dirty bits for VFs 96 to 127. Each bit
2176  * indicates that the FLR register of the corresponding VF was set. Set by
2177  * PXP. Reset by MCP writing 1 to flr_request_vf_127_96_clr. */
2178 #define PGLUE_B_REG_FLR_REQUEST_VF_127_96                        0x9024
2179 /* [R 32] FLR request attention dirty bits for VFs 0 to 31. Each bit
2180  * indicates that the FLR register of the corresponding VF was set. Set by
2181  * PXP. Reset by MCP writing 1 to flr_request_vf_31_0_clr. */
2182 #define PGLUE_B_REG_FLR_REQUEST_VF_31_0                  0x9018
2183 /* [R 32] FLR request attention dirty bits for VFs 32 to 63. Each bit
2184  * indicates that the FLR register of the corresponding VF was set. Set by
2185  * PXP. Reset by MCP writing 1 to flr_request_vf_63_32_clr. */
2186 #define PGLUE_B_REG_FLR_REQUEST_VF_63_32                         0x901c
2187 /* [R 32] FLR request attention dirty bits for VFs 64 to 95. Each bit
2188  * indicates that the FLR register of the corresponding VF was set. Set by
2189  * PXP. Reset by MCP writing 1 to flr_request_vf_95_64_clr. */
2190 #define PGLUE_B_REG_FLR_REQUEST_VF_95_64                         0x9020
2191 /* [R 8] Each bit indicates an incorrect behavior in user RX interface. Bit
2192  * 0 - Target memory read arrived with a correctable error. Bit 1 - Target
2193  * memory read arrived with an uncorrectable error. Bit 2 - Configuration RW
2194  * arrived with a correctable error. Bit 3 - Configuration RW arrived with
2195  * an uncorrectable error. Bit 4 - Completion with Configuration Request
2196  * Retry Status. Bit 5 - Expansion ROM access received with a write request.
2197  * Bit 6 - Completion with pcie_rx_err of 0000; CMPL_STATUS of non-zero; and
2198  * pcie_rx_last not asserted. Bit 7 - Completion with pcie_rx_err of 1010;
2199  * and pcie_rx_last not asserted. */
2200 #define PGLUE_B_REG_INCORRECT_RCV_DETAILS                        0x9068
2201 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_MASTER          0x942c
2202 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_READ             0x9430
2203 #define PGLUE_B_REG_INTERNAL_PFID_ENABLE_TARGET_WRITE            0x9434
2204 #define PGLUE_B_REG_INTERNAL_VFID_ENABLE                         0x9438
2205 /* [R 9] Interrupt register #0 read */
2206 #define PGLUE_B_REG_PGLUE_B_INT_STS                              0x9298
2207 /* [RC 9] Interrupt register #0 read clear */
2208 #define PGLUE_B_REG_PGLUE_B_INT_STS_CLR                  0x929c
2209 /* [R 2] Parity register #0 read */
2210 #define PGLUE_B_REG_PGLUE_B_PRTY_STS                             0x92a8
2211 /* [R 13] Details of first request received with error. [2:0] - PFID. [3] -
2212  * VF_VALID. [9:4] - VFID. [11:10] - Error Code - 0 - Indicates Completion
2213  * Timeout of a User Tx non-posted request. 1 - unsupported request. 2 -
2214  * completer abort. 3 - Illegal value for this field. [12] valid - indicates
2215  * if there was a completion error since the last time this register was
2216  * cleared. */
2217 #define PGLUE_B_REG_RX_ERR_DETAILS                               0x9080
2218 /* [R 18] Details of first ATS Translation Completion request received with
2219  * error. [2:0] - PFID. [3] - VF_VALID. [9:4] - VFID. [11:10] - Error Code -
2220  * 0 - Indicates Completion Timeout of a User Tx non-posted request. 1 -
2221  * unsupported request. 2 - completer abort. 3 - Illegal value for this
2222  * field. [16:12] - ATC OTB EntryID. [17] valid - indicates if there was a
2223  * completion error since the last time this register was cleared. */
2224 #define PGLUE_B_REG_RX_TCPL_ERR_DETAILS                  0x9084
2225 /* [W 8] Debug only - Shadow BME bits clear for PFs 0 to 7. MCP writes 1 to
2226  * a bit in this register in order to clear the corresponding bit in
2227  * shadow_bme_pf_7_0 register. MCP should never use this unless a
2228  * work-around is needed. Note: register contains bits from both paths. */
2229 #define PGLUE_B_REG_SHADOW_BME_PF_7_0_CLR                        0x9458
2230 /* [R 8] SR IOV disabled attention dirty bits. Each bit indicates that the
2231  * VF enable register of the corresponding PF is written to 0 and was
2232  * previously 1. Set by PXP. Reset by MCP writing 1 to
2233  * sr_iov_disabled_request_clr. Note: register contains bits from both
2234  * paths. */
2235 #define PGLUE_B_REG_SR_IOV_DISABLED_REQUEST                      0x9030
2236 /* [R 32] Indicates the status of tags 32-63. 0 - tags is used - read
2237  * completion did not return yet. 1 - tag is unused. Same functionality as
2238  * pxp2_registers_pgl_exp_rom_data2 for tags 0-31. */
2239 #define PGLUE_B_REG_TAGS_63_32                                   0x9244
2240 /* [RW 1] Type A PF enable inbound interrupt table for TSDM. 0 - disable; 1
2241  * - enable. */
2242 #define PGLUE_B_REG_TSDM_INB_INT_A_PF_ENABLE                     0x9170
2243 /* [RW 16] Start offset of TSDM zone A (queue zone) in the internal RAM */
2244 #define PGLUE_B_REG_TSDM_START_OFFSET_A                  0x90c4
2245 /* [RW 16] Start offset of TSDM zone B (legacy zone) in the internal RAM */
2246 #define PGLUE_B_REG_TSDM_START_OFFSET_B                  0x90cc
2247 /* [RW 5] VF Shift of TSDM zone B (legacy zone) in the internal RAM */
2248 #define PGLUE_B_REG_TSDM_VF_SHIFT_B                              0x90d4
2249 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
2250 #define PGLUE_B_REG_TSDM_ZONE_A_SIZE_PF                  0x91a0
2251 /* [R 32] Address [31:0] of first read request not submitted due to error */
2252 #define PGLUE_B_REG_TX_ERR_RD_ADD_31_0                           0x9098
2253 /* [R 32] Address [63:32] of first read request not submitted due to error */
2254 #define PGLUE_B_REG_TX_ERR_RD_ADD_63_32                  0x909c
2255 /* [R 31] Details of first read request not submitted due to error. [4:0]
2256  * VQID. [5] TREQ. 1 - Indicates the request is a Translation Request.
2257  * [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25] -
2258  * VFID. */
2259 #define PGLUE_B_REG_TX_ERR_RD_DETAILS                            0x90a0
2260 /* [R 26] Details of first read request not submitted due to error. [15:0]
2261  * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
2262  * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
2263  * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
2264  * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
2265  * indicates if there was a request not submitted due to error since the
2266  * last time this register was cleared. */
2267 #define PGLUE_B_REG_TX_ERR_RD_DETAILS2                           0x90a4
2268 /* [R 32] Address [31:0] of first write request not submitted due to error */
2269 #define PGLUE_B_REG_TX_ERR_WR_ADD_31_0                           0x9088
2270 /* [R 32] Address [63:32] of first write request not submitted due to error */
2271 #define PGLUE_B_REG_TX_ERR_WR_ADD_63_32                  0x908c
2272 /* [R 31] Details of first write request not submitted due to error. [4:0]
2273  * VQID. [20:8] - Length in bytes. [23:21] - PFID. [24] - VF_VALID. [30:25]
2274  * - VFID. */
2275 #define PGLUE_B_REG_TX_ERR_WR_DETAILS                            0x9090
2276 /* [R 26] Details of first write request not submitted due to error. [15:0]
2277  * Request ID. [19:16] client ID. [20] - last SR. [24:21] - Error type -
2278  * [21] - Indicates was_error was set; [22] - Indicates BME was cleared;
2279  * [23] - Indicates FID_enable was cleared; [24] - Indicates VF with parent
2280  * PF FLR_request or IOV_disable_request dirty bit is set. [25] valid -
2281  * indicates if there was a request not submitted due to error since the
2282  * last time this register was cleared. */
2283 #define PGLUE_B_REG_TX_ERR_WR_DETAILS2                           0x9094
2284 /* [RW 10] Type A PF/VF inbound interrupt table for USDM: bits[9:5]-mask;
2285  * its[4:0]-address relative to start_offset_a. Bits [1:0] can have any
2286  * value (Byte resolution address). */
2287 #define PGLUE_B_REG_USDM_INB_INT_A_0                             0x9128
2288 #define PGLUE_B_REG_USDM_INB_INT_A_1                             0x912c
2289 #define PGLUE_B_REG_USDM_INB_INT_A_2                             0x9130
2290 #define PGLUE_B_REG_USDM_INB_INT_A_3                             0x9134
2291 #define PGLUE_B_REG_USDM_INB_INT_A_4                             0x9138
2292 #define PGLUE_B_REG_USDM_INB_INT_A_5                             0x913c
2293 #define PGLUE_B_REG_USDM_INB_INT_A_6                             0x9140
2294 /* [RW 1] Type A PF enable inbound interrupt table for USDM. 0 - disable; 1
2295  * - enable. */
2296 #define PGLUE_B_REG_USDM_INB_INT_A_PF_ENABLE                     0x917c
2297 /* [RW 1] Type A VF enable inbound interrupt table for USDM. 0 - disable; 1
2298  * - enable. */
2299 #define PGLUE_B_REG_USDM_INB_INT_A_VF_ENABLE                     0x9180
2300 /* [RW 1] Type B VF enable inbound interrupt table for USDM. 0 - disable; 1
2301  * - enable. */
2302 #define PGLUE_B_REG_USDM_INB_INT_B_VF_ENABLE                     0x9184
2303 /* [RW 16] Start offset of USDM zone A (queue zone) in the internal RAM */
2304 #define PGLUE_B_REG_USDM_START_OFFSET_A                  0x90d8
2305 /* [RW 16] Start offset of USDM zone B (legacy zone) in the internal RAM */
2306 #define PGLUE_B_REG_USDM_START_OFFSET_B                  0x90e0
2307 /* [RW 5] VF Shift of USDM zone B (legacy zone) in the internal RAM */
2308 #define PGLUE_B_REG_USDM_VF_SHIFT_B                              0x90e8
2309 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
2310 #define PGLUE_B_REG_USDM_ZONE_A_SIZE_PF                  0x91a4
2311 /* [R 26] Details of first target VF request accessing VF GRC space that
2312  * failed permission check. [14:0] Address. [15] w_nr: 0 - Read; 1 - Write.
2313  * [21:16] VFID. [24:22] - PFID. [25] valid - indicates if there was a
2314  * request accessing VF GRC space that failed permission check since the
2315  * last time this register was cleared. Permission checks are: function
2316  * permission; R/W permission; address range permission. */
2317 #define PGLUE_B_REG_VF_GRC_SPACE_VIOLATION_DETAILS               0x9234
2318 /* [R 31] Details of first target VF request with length violation (too many
2319  * DWs) accessing BAR0. [12:0] Address in DWs (bits [14:2] of byte address).
2320  * [14:13] BAR. [20:15] VFID. [23:21] - PFID. [29:24] - Length in DWs. [30]
2321  * valid - indicates if there was a request with length violation since the
2322  * last time this register was cleared. Length violations: length of more
2323  * than 2DWs; length of 2DWs and address not QW aligned; window is GRC and
2324  * length is more than 1 DW. */
2325 #define PGLUE_B_REG_VF_LENGTH_VIOLATION_DETAILS          0x9230
2326 /* [R 8] Was_error indication dirty bits for PFs 0 to 7. Each bit indicates
2327  * that there was a completion with uncorrectable error for the
2328  * corresponding PF. Set by PXP. Reset by MCP writing 1 to
2329  * was_error_pf_7_0_clr. */
2330 #define PGLUE_B_REG_WAS_ERROR_PF_7_0                             0x907c
2331 /* [W 8] Was_error indication dirty bits clear for PFs 0 to 7. MCP writes 1
2332  * to a bit in this register in order to clear the corresponding bit in
2333  * flr_request_pf_7_0 register. */
2334 #define PGLUE_B_REG_WAS_ERROR_PF_7_0_CLR                         0x9470
2335 /* [R 32] Was_error indication dirty bits for VFs 96 to 127. Each bit
2336  * indicates that there was a completion with uncorrectable error for the
2337  * corresponding VF. Set by PXP. Reset by MCP writing 1 to
2338  * was_error_vf_127_96_clr. */
2339 #define PGLUE_B_REG_WAS_ERROR_VF_127_96                  0x9078
2340 /* [W 32] Was_error indication dirty bits clear for VFs 96 to 127. MCP
2341  * writes 1 to a bit in this register in order to clear the corresponding
2342  * bit in was_error_vf_127_96 register. */
2343 #define PGLUE_B_REG_WAS_ERROR_VF_127_96_CLR                      0x9474
2344 /* [R 32] Was_error indication dirty bits for VFs 0 to 31. Each bit
2345  * indicates that there was a completion with uncorrectable error for the
2346  * corresponding VF. Set by PXP. Reset by MCP writing 1 to
2347  * was_error_vf_31_0_clr. */
2348 #define PGLUE_B_REG_WAS_ERROR_VF_31_0                            0x906c
2349 /* [W 32] Was_error indication dirty bits clear for VFs 0 to 31. MCP writes
2350  * 1 to a bit in this register in order to clear the corresponding bit in
2351  * was_error_vf_31_0 register. */
2352 #define PGLUE_B_REG_WAS_ERROR_VF_31_0_CLR                        0x9478
2353 /* [R 32] Was_error indication dirty bits for VFs 32 to 63. Each bit
2354  * indicates that there was a completion with uncorrectable error for the
2355  * corresponding VF. Set by PXP. Reset by MCP writing 1 to
2356  * was_error_vf_63_32_clr. */
2357 #define PGLUE_B_REG_WAS_ERROR_VF_63_32                           0x9070
2358 /* [W 32] Was_error indication dirty bits clear for VFs 32 to 63. MCP writes
2359  * 1 to a bit in this register in order to clear the corresponding bit in
2360  * was_error_vf_63_32 register. */
2361 #define PGLUE_B_REG_WAS_ERROR_VF_63_32_CLR                       0x947c
2362 /* [R 32] Was_error indication dirty bits for VFs 64 to 95. Each bit
2363  * indicates that there was a completion with uncorrectable error for the
2364  * corresponding VF. Set by PXP. Reset by MCP writing 1 to
2365  * was_error_vf_95_64_clr. */
2366 #define PGLUE_B_REG_WAS_ERROR_VF_95_64                           0x9074
2367 /* [W 32] Was_error indication dirty bits clear for VFs 64 to 95. MCP writes
2368  * 1 to a bit in this register in order to clear the corresponding bit in
2369  * was_error_vf_95_64 register. */
2370 #define PGLUE_B_REG_WAS_ERROR_VF_95_64_CLR                       0x9480
2371 /* [RW 1] Type A PF enable inbound interrupt table for XSDM. 0 - disable; 1
2372  * - enable. */
2373 #define PGLUE_B_REG_XSDM_INB_INT_A_PF_ENABLE                     0x9188
2374 /* [RW 16] Start offset of XSDM zone A (queue zone) in the internal RAM */
2375 #define PGLUE_B_REG_XSDM_START_OFFSET_A                  0x90ec
2376 /* [RW 16] Start offset of XSDM zone B (legacy zone) in the internal RAM */
2377 #define PGLUE_B_REG_XSDM_START_OFFSET_B                  0x90f4
2378 /* [RW 5] VF Shift of XSDM zone B (legacy zone) in the internal RAM */
2379 #define PGLUE_B_REG_XSDM_VF_SHIFT_B                              0x90fc
2380 /* [RW 1] 0 - Zone A size is 136x32B; 1 - Zone A size is 152x32B. */
2381 #define PGLUE_B_REG_XSDM_ZONE_A_SIZE_PF                  0x91a8
2382 #define PRS_REG_A_PRSU_20                                        0x40134
2383 /* [R 8] debug only: CFC load request current credit. Transaction based. */
2384 #define PRS_REG_CFC_LD_CURRENT_CREDIT                            0x40164
2385 /* [R 8] debug only: CFC search request current credit. Transaction based. */
2386 #define PRS_REG_CFC_SEARCH_CURRENT_CREDIT                        0x40168
2387 /* [RW 6] The initial credit for the search message to the CFC interface.
2388    Credit is transaction based. */
2389 #define PRS_REG_CFC_SEARCH_INITIAL_CREDIT                        0x4011c
2390 /* [RW 24] CID for port 0 if no match */
2391 #define PRS_REG_CID_PORT_0                                       0x400fc
2392 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
2393    load response is reset and packet type is 0. Used in packet start message
2394    to TCM. */
2395 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_0                         0x400dc
2396 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_1                         0x400e0
2397 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_2                         0x400e4
2398 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_3                         0x400e8
2399 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_4                         0x400ec
2400 #define PRS_REG_CM_HDR_FLUSH_LOAD_TYPE_5                         0x400f0
2401 /* [RW 32] The CM header for flush message where 'load existed' bit in CFC
2402    load response is set and packet type is 0. Used in packet start message
2403    to TCM. */
2404 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_0                      0x400bc
2405 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_1                      0x400c0
2406 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_2                      0x400c4
2407 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_3                      0x400c8
2408 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_4                      0x400cc
2409 #define PRS_REG_CM_HDR_FLUSH_NO_LOAD_TYPE_5                      0x400d0
2410 /* [RW 32] The CM header for a match and packet type 1 for loopback port.
2411    Used in packet start message to TCM. */
2412 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_1                           0x4009c
2413 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_2                           0x400a0
2414 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_3                           0x400a4
2415 #define PRS_REG_CM_HDR_LOOPBACK_TYPE_4                           0x400a8
2416 /* [RW 32] The CM header for a match and packet type 0. Used in packet start
2417    message to TCM. */
2418 #define PRS_REG_CM_HDR_TYPE_0                                    0x40078
2419 #define PRS_REG_CM_HDR_TYPE_1                                    0x4007c
2420 #define PRS_REG_CM_HDR_TYPE_2                                    0x40080
2421 #define PRS_REG_CM_HDR_TYPE_3                                    0x40084
2422 #define PRS_REG_CM_HDR_TYPE_4                                    0x40088
2423 /* [RW 32] The CM header in case there was not a match on the connection */
2424 #define PRS_REG_CM_NO_MATCH_HDR                                  0x400b8
2425 /* [RW 1] Indicates if in e1hov mode. 0=non-e1hov mode; 1=e1hov mode. */
2426 #define PRS_REG_E1HOV_MODE                                       0x401c8
2427 /* [RW 8] The 8-bit event ID for a match and packet type 1. Used in packet
2428    start message to TCM. */
2429 #define PRS_REG_EVENT_ID_1                                       0x40054
2430 #define PRS_REG_EVENT_ID_2                                       0x40058
2431 #define PRS_REG_EVENT_ID_3                                       0x4005c
2432 /* [RW 16] The Ethernet type value for FCoE */
2433 #define PRS_REG_FCOE_TYPE                                        0x401d0
2434 /* [RW 8] Context region for flush packet with packet type 0. Used in CFC
2435    load request message. */
2436 #define PRS_REG_FLUSH_REGIONS_TYPE_0                             0x40004
2437 #define PRS_REG_FLUSH_REGIONS_TYPE_1                             0x40008
2438 #define PRS_REG_FLUSH_REGIONS_TYPE_2                             0x4000c
2439 #define PRS_REG_FLUSH_REGIONS_TYPE_3                             0x40010
2440 #define PRS_REG_FLUSH_REGIONS_TYPE_4                             0x40014
2441 #define PRS_REG_FLUSH_REGIONS_TYPE_5                             0x40018
2442 #define PRS_REG_FLUSH_REGIONS_TYPE_6                             0x4001c
2443 #define PRS_REG_FLUSH_REGIONS_TYPE_7                             0x40020
2444 /* [RW 6] Bit-map indicating which L2 hdrs may appear after the basic
2445  * Ethernet header. */
2446 #define PRS_REG_HDRS_AFTER_BASIC                                 0x40238
2447 /* [RW 4] The increment value to send in the CFC load request message */
2448 #define PRS_REG_INC_VALUE                                        0x40048
2449 /* [RW 6] Bit-map indicating which headers must appear in the packet */
2450 #define PRS_REG_MUST_HAVE_HDRS                                   0x40254
2451 #define PRS_REG_NIC_MODE                                         0x40138
2452 /* [RW 8] The 8-bit event ID for cases where there is no match on the
2453    connection. Used in packet start message to TCM. */
2454 #define PRS_REG_NO_MATCH_EVENT_ID                                0x40070
2455 /* [ST 24] The number of input CFC flush packets */
2456 #define PRS_REG_NUM_OF_CFC_FLUSH_MESSAGES                        0x40128
2457 /* [ST 32] The number of cycles the Parser halted its operation since it
2458    could not allocate the next serial number */
2459 #define PRS_REG_NUM_OF_DEAD_CYCLES                               0x40130
2460 /* [ST 24] The number of input packets */
2461 #define PRS_REG_NUM_OF_PACKETS                                   0x40124
2462 /* [ST 24] The number of input transparent flush packets */
2463 #define PRS_REG_NUM_OF_TRANSPARENT_FLUSH_MESSAGES                0x4012c
2464 /* [RW 8] Context region for received Ethernet packet with a match and
2465    packet type 0. Used in CFC load request message */
2466 #define PRS_REG_PACKET_REGIONS_TYPE_0                            0x40028
2467 #define PRS_REG_PACKET_REGIONS_TYPE_1                            0x4002c
2468 #define PRS_REG_PACKET_REGIONS_TYPE_2                            0x40030
2469 #define PRS_REG_PACKET_REGIONS_TYPE_3                            0x40034
2470 #define PRS_REG_PACKET_REGIONS_TYPE_4                            0x40038
2471 #define PRS_REG_PACKET_REGIONS_TYPE_5                            0x4003c
2472 #define PRS_REG_PACKET_REGIONS_TYPE_6                            0x40040
2473 #define PRS_REG_PACKET_REGIONS_TYPE_7                            0x40044
2474 /* [R 2] debug only: Number of pending requests for CAC on port 0. */
2475 #define PRS_REG_PENDING_BRB_CAC0_RQ                              0x40174
2476 /* [R 2] debug only: Number of pending requests for header parsing. */
2477 #define PRS_REG_PENDING_BRB_PRS_RQ                               0x40170
2478 /* [R 1] Interrupt register #0 read */
2479 #define PRS_REG_PRS_INT_STS                                      0x40188
2480 /* [RW 8] Parity mask register #0 read/write */
2481 #define PRS_REG_PRS_PRTY_MASK                                    0x401a4
2482 /* [R 8] Parity register #0 read */
2483 #define PRS_REG_PRS_PRTY_STS                                     0x40198
2484 /* [RC 8] Parity register #0 read clear */
2485 #define PRS_REG_PRS_PRTY_STS_CLR                                 0x4019c
2486 /* [RW 8] Context region for pure acknowledge packets. Used in CFC load
2487    request message */
2488 #define PRS_REG_PURE_REGIONS                                     0x40024
2489 /* [R 32] debug only: Serial number status lsb 32 bits. '1' indicates this
2490    serail number was released by SDM but cannot be used because a previous
2491    serial number was not released. */
2492 #define PRS_REG_SERIAL_NUM_STATUS_LSB                            0x40154
2493 /* [R 32] debug only: Serial number status msb 32 bits. '1' indicates this
2494    serail number was released by SDM but cannot be used because a previous
2495    serial number was not released. */
2496 #define PRS_REG_SERIAL_NUM_STATUS_MSB                            0x40158
2497 /* [R 4] debug only: SRC current credit. Transaction based. */
2498 #define PRS_REG_SRC_CURRENT_CREDIT                               0x4016c
2499 /* [R 8] debug only: TCM current credit. Cycle based. */
2500 #define PRS_REG_TCM_CURRENT_CREDIT                               0x40160
2501 /* [R 8] debug only: TSDM current credit. Transaction based. */
2502 #define PRS_REG_TSDM_CURRENT_CREDIT                              0x4015c
2503 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_AFT                     (0x1<<19)
2504 #define PXP2_PXP2_INT_MASK_0_REG_PGL_CPL_OF                      (0x1<<20)
2505 #define PXP2_PXP2_INT_MASK_0_REG_PGL_PCIE_ATTN                   (0x1<<22)
2506 #define PXP2_PXP2_INT_MASK_0_REG_PGL_READ_BLOCKED                (0x1<<23)
2507 #define PXP2_PXP2_INT_MASK_0_REG_PGL_WRITE_BLOCKED               (0x1<<24)
2508 #define PXP2_PXP2_INT_STS_0_REG_WR_PGLUE_EOP_ERROR               (0x1<<7)
2509 #define PXP2_PXP2_INT_STS_CLR_0_REG_WR_PGLUE_EOP_ERROR           (0x1<<7)
2510 /* [R 6] Debug only: Number of used entries in the data FIFO */
2511 #define PXP2_REG_HST_DATA_FIFO_STATUS                            0x12047c
2512 /* [R 7] Debug only: Number of used entries in the header FIFO */
2513 #define PXP2_REG_HST_HEADER_FIFO_STATUS                          0x120478
2514 #define PXP2_REG_PGL_ADDR_88_F0                                  0x120534
2515 #define PXP2_REG_PGL_ADDR_8C_F0                                  0x120538
2516 #define PXP2_REG_PGL_ADDR_90_F0                                  0x12053c
2517 #define PXP2_REG_PGL_ADDR_94_F0                                  0x120540
2518 #define PXP2_REG_PGL_CONTROL0                                    0x120490
2519 #define PXP2_REG_PGL_CONTROL1                                    0x120514
2520 #define PXP2_REG_PGL_DEBUG                                       0x120520
2521 /* [RW 32] third dword data of expansion rom request. this register is
2522    special. reading from it provides a vector outstanding read requests. if
2523    a bit is zero it means that a read request on the corresponding tag did
2524    not finish yet (not all completions have arrived for it) */
2525 #define PXP2_REG_PGL_EXP_ROM2                                    0x120808
2526 /* [RW 32] Inbound interrupt table for CSDM: bits[31:16]-mask;
2527    its[15:0]-address */
2528 #define PXP2_REG_PGL_INT_CSDM_0                                  0x1204f4
2529 #define PXP2_REG_PGL_INT_CSDM_1                                  0x1204f8
2530 #define PXP2_REG_PGL_INT_CSDM_2                                  0x1204fc
2531 #define PXP2_REG_PGL_INT_CSDM_3                                  0x120500
2532 #define PXP2_REG_PGL_INT_CSDM_4                                  0x120504
2533 #define PXP2_REG_PGL_INT_CSDM_5                                  0x120508
2534 #define PXP2_REG_PGL_INT_CSDM_6                                  0x12050c
2535 #define PXP2_REG_PGL_INT_CSDM_7                                  0x120510
2536 /* [RW 32] Inbound interrupt table for TSDM: bits[31:16]-mask;
2537    its[15:0]-address */
2538 #define PXP2_REG_PGL_INT_TSDM_0                                  0x120494
2539 #define PXP2_REG_PGL_INT_TSDM_1                                  0x120498
2540 #define PXP2_REG_PGL_INT_TSDM_2                                  0x12049c
2541 #define PXP2_REG_PGL_INT_TSDM_3                                  0x1204a0
2542 #define PXP2_REG_PGL_INT_TSDM_4                                  0x1204a4
2543 #define PXP2_REG_PGL_INT_TSDM_5                                  0x1204a8
2544 #define PXP2_REG_PGL_INT_TSDM_6                                  0x1204ac
2545 #define PXP2_REG_PGL_INT_TSDM_7                                  0x1204b0
2546 /* [RW 32] Inbound interrupt table for USDM: bits[31:16]-mask;
2547    its[15:0]-address */
2548 #define PXP2_REG_PGL_INT_USDM_0                                  0x1204b4
2549 #define PXP2_REG_PGL_INT_USDM_1                                  0x1204b8
2550 #define PXP2_REG_PGL_INT_USDM_2                                  0x1204bc
2551 #define PXP2_REG_PGL_INT_USDM_3                                  0x1204c0
2552 #define PXP2_REG_PGL_INT_USDM_4                                  0x1204c4
2553 #define PXP2_REG_PGL_INT_USDM_5                                  0x1204c8
2554 #define PXP2_REG_PGL_INT_USDM_6                                  0x1204cc
2555 #define PXP2_REG_PGL_INT_USDM_7                                  0x1204d0
2556 /* [RW 32] Inbound interrupt table for XSDM: bits[31:16]-mask;
2557    its[15:0]-address */
2558 #define PXP2_REG_PGL_INT_XSDM_0                                  0x1204d4
2559 #define PXP2_REG_PGL_INT_XSDM_1                                  0x1204d8
2560 #define PXP2_REG_PGL_INT_XSDM_2                                  0x1204dc
2561 #define PXP2_REG_PGL_INT_XSDM_3                                  0x1204e0
2562 #define PXP2_REG_PGL_INT_XSDM_4                                  0x1204e4
2563 #define PXP2_REG_PGL_INT_XSDM_5                                  0x1204e8
2564 #define PXP2_REG_PGL_INT_XSDM_6                                  0x1204ec
2565 #define PXP2_REG_PGL_INT_XSDM_7                                  0x1204f0
2566 /* [RW 3] this field allows one function to pretend being another function
2567    when accessing any BAR mapped resource within the device. the value of
2568    the field is the number of the function that will be accessed
2569    effectively. after software write to this bit it must read it in order to
2570    know that the new value is updated */
2571 #define PXP2_REG_PGL_PRETEND_FUNC_F0                             0x120674
2572 #define PXP2_REG_PGL_PRETEND_FUNC_F1                             0x120678
2573 #define PXP2_REG_PGL_PRETEND_FUNC_F2                             0x12067c
2574 #define PXP2_REG_PGL_PRETEND_FUNC_F3                             0x120680
2575 #define PXP2_REG_PGL_PRETEND_FUNC_F4                             0x120684
2576 #define PXP2_REG_PGL_PRETEND_FUNC_F5                             0x120688
2577 #define PXP2_REG_PGL_PRETEND_FUNC_F6                             0x12068c
2578 #define PXP2_REG_PGL_PRETEND_FUNC_F7                             0x120690
2579 /* [R 1] this bit indicates that a read request was blocked because of
2580    bus_master_en was deasserted */
2581 #define PXP2_REG_PGL_READ_BLOCKED                                0x120568
2582 #define PXP2_REG_PGL_TAGS_LIMIT                                  0x1205a8
2583 /* [R 18] debug only */
2584 #define PXP2_REG_PGL_TXW_CDTS                                    0x12052c
2585 /* [R 1] this bit indicates that a write request was blocked because of
2586    bus_master_en was deasserted */
2587 #define PXP2_REG_PGL_WRITE_BLOCKED                               0x120564
2588 #define PXP2_REG_PSWRQ_BW_ADD1                                   0x1201c0
2589 #define PXP2_REG_PSWRQ_BW_ADD10                                  0x1201e4
2590 #define PXP2_REG_PSWRQ_BW_ADD11                                  0x1201e8
2591 #define PXP2_REG_PSWRQ_BW_ADD2                                   0x1201c4
2592 #define PXP2_REG_PSWRQ_BW_ADD28                                  0x120228
2593 #define PXP2_REG_PSWRQ_BW_ADD3                                   0x1201c8
2594 #define PXP2_REG_PSWRQ_BW_ADD6                                   0x1201d4
2595 #define PXP2_REG_PSWRQ_BW_ADD7                                   0x1201d8
2596 #define PXP2_REG_PSWRQ_BW_ADD8                                   0x1201dc
2597 #define PXP2_REG_PSWRQ_BW_ADD9                                   0x1201e0
2598 #define PXP2_REG_PSWRQ_BW_CREDIT                                 0x12032c
2599 #define PXP2_REG_PSWRQ_BW_L1                                     0x1202b0
2600 #define PXP2_REG_PSWRQ_BW_L10                                    0x1202d4
2601 #define PXP2_REG_PSWRQ_BW_L11                                    0x1202d8
2602 #define PXP2_REG_PSWRQ_BW_L2                                     0x1202b4
2603 #define PXP2_REG_PSWRQ_BW_L28                                    0x120318
2604 #define PXP2_REG_PSWRQ_BW_L3                                     0x1202b8
2605 #define PXP2_REG_PSWRQ_BW_L6                                     0x1202c4
2606 #define PXP2_REG_PSWRQ_BW_L7                                     0x1202c8
2607 #define PXP2_REG_PSWRQ_BW_L8                                     0x1202cc
2608 #define PXP2_REG_PSWRQ_BW_L9                                     0x1202d0
2609 #define PXP2_REG_PSWRQ_BW_RD                                     0x120324
2610 #define PXP2_REG_PSWRQ_BW_UB1                                    0x120238
2611 #define PXP2_REG_PSWRQ_BW_UB10                                   0x12025c
2612 #define PXP2_REG_PSWRQ_BW_UB11                                   0x120260
2613 #define PXP2_REG_PSWRQ_BW_UB2                                    0x12023c
2614 #define PXP2_REG_PSWRQ_BW_UB28                                   0x1202a0
2615 #define PXP2_REG_PSWRQ_BW_UB3                                    0x120240
2616 #define PXP2_REG_PSWRQ_BW_UB6                                    0x12024c
2617 #define PXP2_REG_PSWRQ_BW_UB7                                    0x120250
2618 #define PXP2_REG_PSWRQ_BW_UB8                                    0x120254
2619 #define PXP2_REG_PSWRQ_BW_UB9                                    0x120258
2620 #define PXP2_REG_PSWRQ_BW_WR                                     0x120328
2621 #define PXP2_REG_PSWRQ_CDU0_L2P                                  0x120000
2622 #define PXP2_REG_PSWRQ_QM0_L2P                                   0x120038
2623 #define PXP2_REG_PSWRQ_SRC0_L2P                                  0x120054
2624 #define PXP2_REG_PSWRQ_TM0_L2P                                   0x12001c
2625 #define PXP2_REG_PSWRQ_TSDM0_L2P                                 0x1200e0
2626 /* [RW 32] Interrupt mask register #0 read/write */
2627 #define PXP2_REG_PXP2_INT_MASK_0                                 0x120578
2628 /* [R 32] Interrupt register #0 read */
2629 #define PXP2_REG_PXP2_INT_STS_0                                  0x12056c
2630 #define PXP2_REG_PXP2_INT_STS_1                                  0x120608
2631 /* [RC 32] Interrupt register #0 read clear */
2632 #define PXP2_REG_PXP2_INT_STS_CLR_0                              0x120570
2633 /* [RW 32] Parity mask register #0 read/write */
2634 #define PXP2_REG_PXP2_PRTY_MASK_0                                0x120588
2635 #define PXP2_REG_PXP2_PRTY_MASK_1                                0x120598
2636 /* [R 32] Parity register #0 read */
2637 #define PXP2_REG_PXP2_PRTY_STS_0                                 0x12057c
2638 #define PXP2_REG_PXP2_PRTY_STS_1                                 0x12058c
2639 /* [RC 32] Parity register #0 read clear */
2640 #define PXP2_REG_PXP2_PRTY_STS_CLR_0                             0x120580
2641 #define PXP2_REG_PXP2_PRTY_STS_CLR_1                             0x120590
2642 /* [R 1] Debug only: The 'almost full' indication from each fifo (gives
2643    indication about backpressure) */
2644 #define PXP2_REG_RD_ALMOST_FULL_0                                0x120424
2645 /* [R 8] Debug only: The blocks counter - number of unused block ids */
2646 #define PXP2_REG_RD_BLK_CNT                                      0x120418
2647 /* [RW 8] Debug only: Total number of available blocks in Tetris Buffer.
2648    Must be bigger than 6. Normally should not be changed. */
2649 #define PXP2_REG_RD_BLK_NUM_CFG                                  0x12040c
2650 /* [RW 2] CDU byte swapping mode configuration for master read requests */
2651 #define PXP2_REG_RD_CDURD_SWAP_MODE                              0x120404
2652 /* [RW 1] When '1'; inputs to the PSWRD block are ignored */
2653 #define PXP2_REG_RD_DISABLE_INPUTS                               0x120374
2654 /* [R 1] PSWRD internal memories initialization is done */
2655 #define PXP2_REG_RD_INIT_DONE                                    0x120370
2656 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2657    allocated for vq10 */
2658 #define PXP2_REG_RD_MAX_BLKS_VQ10                                0x1203a0
2659 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2660    allocated for vq11 */
2661 #define PXP2_REG_RD_MAX_BLKS_VQ11                                0x1203a4
2662 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2663    allocated for vq17 */
2664 #define PXP2_REG_RD_MAX_BLKS_VQ17                                0x1203bc
2665 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2666    allocated for vq18 */
2667 #define PXP2_REG_RD_MAX_BLKS_VQ18                                0x1203c0
2668 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2669    allocated for vq19 */
2670 #define PXP2_REG_RD_MAX_BLKS_VQ19                                0x1203c4
2671 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2672    allocated for vq22 */
2673 #define PXP2_REG_RD_MAX_BLKS_VQ22                                0x1203d0
2674 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2675    allocated for vq25 */
2676 #define PXP2_REG_RD_MAX_BLKS_VQ25                                0x1203dc
2677 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2678    allocated for vq6 */
2679 #define PXP2_REG_RD_MAX_BLKS_VQ6                                 0x120390
2680 /* [RW 8] The maximum number of blocks in Tetris Buffer that can be
2681    allocated for vq9 */
2682 #define PXP2_REG_RD_MAX_BLKS_VQ9                                 0x12039c
2683 /* [RW 2] PBF byte swapping mode configuration for master read requests */
2684 #define PXP2_REG_RD_PBF_SWAP_MODE                                0x1203f4
2685 /* [R 1] Debug only: Indication if delivery ports are idle */
2686 #define PXP2_REG_RD_PORT_IS_IDLE_0                               0x12041c
2687 #define PXP2_REG_RD_PORT_IS_IDLE_1                               0x120420
2688 /* [RW 2] QM byte swapping mode configuration for master read requests */
2689 #define PXP2_REG_RD_QM_SWAP_MODE                                 0x1203f8
2690 /* [R 7] Debug only: The SR counter - number of unused sub request ids */
2691 #define PXP2_REG_RD_SR_CNT                                       0x120414
2692 /* [RW 2] SRC byte swapping mode configuration for master read requests */
2693 #define PXP2_REG_RD_SRC_SWAP_MODE                                0x120400
2694 /* [RW 7] Debug only: Total number of available PCI read sub-requests. Must
2695    be bigger than 1. Normally should not be changed. */
2696 #define PXP2_REG_RD_SR_NUM_CFG                                   0x120408
2697 /* [RW 1] Signals the PSWRD block to start initializing internal memories */
2698 #define PXP2_REG_RD_START_INIT                                   0x12036c
2699 /* [RW 2] TM byte swapping mode configuration for master read requests */
2700 #define PXP2_REG_RD_TM_SWAP_MODE                                 0x1203fc
2701 /* [RW 10] Bandwidth addition to VQ0 write requests */
2702 #define PXP2_REG_RQ_BW_RD_ADD0                                   0x1201bc
2703 /* [RW 10] Bandwidth addition to VQ12 read requests */
2704 #define PXP2_REG_RQ_BW_RD_ADD12                                  0x1201ec
2705 /* [RW 10] Bandwidth addition to VQ13 read requests */
2706 #define PXP2_REG_RQ_BW_RD_ADD13                                  0x1201f0
2707 /* [RW 10] Bandwidth addition to VQ14 read requests */
2708 #define PXP2_REG_RQ_BW_RD_ADD14                                  0x1201f4
2709 /* [RW 10] Bandwidth addition to VQ15 read requests */
2710 #define PXP2_REG_RQ_BW_RD_ADD15                                  0x1201f8
2711 /* [RW 10] Bandwidth addition to VQ16 read requests */
2712 #define PXP2_REG_RQ_BW_RD_ADD16                                  0x1201fc
2713 /* [RW 10] Bandwidth addition to VQ17 read requests */
2714 #define PXP2_REG_RQ_BW_RD_ADD17                                  0x120200
2715 /* [RW 10] Bandwidth addition to VQ18 read requests */
2716 #define PXP2_REG_RQ_BW_RD_ADD18                                  0x120204
2717 /* [RW 10] Bandwidth addition to VQ19 read requests */
2718 #define PXP2_REG_RQ_BW_RD_ADD19                                  0x120208
2719 /* [RW 10] Bandwidth addition to VQ20 read requests */
2720 #define PXP2_REG_RQ_BW_RD_ADD20                                  0x12020c
2721 /* [RW 10] Bandwidth addition to VQ22 read requests */
2722 #define PXP2_REG_RQ_BW_RD_ADD22                                  0x120210
2723 /* [RW 10] Bandwidth addition to VQ23 read requests */
2724 #define PXP2_REG_RQ_BW_RD_ADD23                                  0x120214
2725 /* [RW 10] Bandwidth addition to VQ24 read requests */
2726 #define PXP2_REG_RQ_BW_RD_ADD24                                  0x120218
2727 /* [RW 10] Bandwidth addition to VQ25 read requests */
2728 #define PXP2_REG_RQ_BW_RD_ADD25                                  0x12021c
2729 /* [RW 10] Bandwidth addition to VQ26 read requests */
2730 #define PXP2_REG_RQ_BW_RD_ADD26                                  0x120220
2731 /* [RW 10] Bandwidth addition to VQ27 read requests */
2732 #define PXP2_REG_RQ_BW_RD_ADD27                                  0x120224
2733 /* [RW 10] Bandwidth addition to VQ4 read requests */
2734 #define PXP2_REG_RQ_BW_RD_ADD4                                   0x1201cc
2735 /* [RW 10] Bandwidth addition to VQ5 read requests */
2736 #define PXP2_REG_RQ_BW_RD_ADD5                                   0x1201d0
2737 /* [RW 10] Bandwidth Typical L for VQ0 Read requests */
2738 #define PXP2_REG_RQ_BW_RD_L0                                     0x1202ac
2739 /* [RW 10] Bandwidth Typical L for VQ12 Read requests */
2740 #define PXP2_REG_RQ_BW_RD_L12                                    0x1202dc
2741 /* [RW 10] Bandwidth Typical L for VQ13 Read requests */
2742 #define PXP2_REG_RQ_BW_RD_L13                                    0x1202e0
2743 /* [RW 10] Bandwidth Typical L for VQ14 Read requests */
2744 #define PXP2_REG_RQ_BW_RD_L14                                    0x1202e4
2745 /* [RW 10] Bandwidth Typical L for VQ15 Read requests */
2746 #define PXP2_REG_RQ_BW_RD_L15                                    0x1202e8
2747 /* [RW 10] Bandwidth Typical L for VQ16 Read requests */
2748 #define PXP2_REG_RQ_BW_RD_L16                                    0x1202ec
2749 /* [RW 10] Bandwidth Typical L for VQ17 Read requests */
2750 #define PXP2_REG_RQ_BW_RD_L17                                    0x1202f0
2751 /* [RW 10] Bandwidth Typical L for VQ18 Read requests */
2752 #define PXP2_REG_RQ_BW_RD_L18                                    0x1202f4
2753 /* [RW 10] Bandwidth Typical L for VQ19 Read requests */
2754 #define PXP2_REG_RQ_BW_RD_L19                                    0x1202f8
2755 /* [RW 10] Bandwidth Typical L for VQ20 Read requests */
2756 #define PXP2_REG_RQ_BW_RD_L20                                    0x1202fc
2757 /* [RW 10] Bandwidth Typical L for VQ22 Read requests */
2758 #define PXP2_REG_RQ_BW_RD_L22                                    0x120300
2759 /* [RW 10] Bandwidth Typical L for VQ23 Read requests */
2760 #define PXP2_REG_RQ_BW_RD_L23                                    0x120304
2761 /* [RW 10] Bandwidth Typical L for VQ24 Read requests */
2762 #define PXP2_REG_RQ_BW_RD_L24                                    0x120308
2763 /* [RW 10] Bandwidth Typical L for VQ25 Read requests */
2764 #define PXP2_REG_RQ_BW_RD_L25                                    0x12030c
2765 /* [RW 10] Bandwidth Typical L for VQ26 Read requests */
2766 #define PXP2_REG_RQ_BW_RD_L26                                    0x120310
2767 /* [RW 10] Bandwidth Typical L for VQ27 Read requests */
2768 #define PXP2_REG_RQ_BW_RD_L27                                    0x120314
2769 /* [RW 10] Bandwidth Typical L for VQ4 Read requests */
2770 #define PXP2_REG_RQ_BW_RD_L4                                     0x1202bc
2771 /* [RW 10] Bandwidth Typical L for VQ5 Read- currently not used */
2772 #define PXP2_REG_RQ_BW_RD_L5                                     0x1202c0
2773 /* [RW 7] Bandwidth upper bound for VQ0 read requests */
2774 #define PXP2_REG_RQ_BW_RD_UBOUND0                                0x120234
2775 /* [RW 7] Bandwidth upper bound for VQ12 read requests */
2776 #define PXP2_REG_RQ_BW_RD_UBOUND12                               0x120264
2777 /* [RW 7] Bandwidth upper bound for VQ13 read requests */
2778 #define PXP2_REG_RQ_BW_RD_UBOUND13                               0x120268
2779 /* [RW 7] Bandwidth upper bound for VQ14 read requests */
2780 #define PXP2_REG_RQ_BW_RD_UBOUND14                               0x12026c
2781 /* [RW 7] Bandwidth upper bound for VQ15 read requests */
2782 #define PXP2_REG_RQ_BW_RD_UBOUND15                               0x120270
2783 /* [RW 7] Bandwidth upper bound for VQ16 read requests */
2784 #define PXP2_REG_RQ_BW_RD_UBOUND16                               0x120274
2785 /* [RW 7] Bandwidth upper bound for VQ17 read requests */
2786 #define PXP2_REG_RQ_BW_RD_UBOUND17                               0x120278
2787 /* [RW 7] Bandwidth upper bound for VQ18 read requests */
2788 #define PXP2_REG_RQ_BW_RD_UBOUND18                               0x12027c
2789 /* [RW 7] Bandwidth upper bound for VQ19 read requests */
2790 #define PXP2_REG_RQ_BW_RD_UBOUND19                               0x120280
2791 /* [RW 7] Bandwidth upper bound for VQ20 read requests */
2792 #define PXP2_REG_RQ_BW_RD_UBOUND20                               0x120284
2793 /* [RW 7] Bandwidth upper bound for VQ22 read requests */
2794 #define PXP2_REG_RQ_BW_RD_UBOUND22                               0x120288
2795 /* [RW 7] Bandwidth upper bound for VQ23 read requests */
2796 #define PXP2_REG_RQ_BW_RD_UBOUND23                               0x12028c
2797 /* [RW 7] Bandwidth upper bound for VQ24 read requests */
2798 #define PXP2_REG_RQ_BW_RD_UBOUND24                               0x120290
2799 /* [RW 7] Bandwidth upper bound for VQ25 read requests */
2800 #define PXP2_REG_RQ_BW_RD_UBOUND25                               0x120294
2801 /* [RW 7] Bandwidth upper bound for VQ26 read requests */
2802 #define PXP2_REG_RQ_BW_RD_UBOUND26                               0x120298
2803 /* [RW 7] Bandwidth upper bound for VQ27 read requests */
2804 #define PXP2_REG_RQ_BW_RD_UBOUND27                               0x12029c
2805 /* [RW 7] Bandwidth upper bound for VQ4 read requests */
2806 #define PXP2_REG_RQ_BW_RD_UBOUND4                                0x120244
2807 /* [RW 7] Bandwidth upper bound for VQ5 read requests */
2808 #define PXP2_REG_RQ_BW_RD_UBOUND5                                0x120248
2809 /* [RW 10] Bandwidth addition to VQ29 write requests */
2810 #define PXP2_REG_RQ_BW_WR_ADD29                                  0x12022c
2811 /* [RW 10] Bandwidth addition to VQ30 write requests */
2812 #define PXP2_REG_RQ_BW_WR_ADD30                                  0x120230
2813 /* [RW 10] Bandwidth Typical L for VQ29 Write requests */
2814 #define PXP2_REG_RQ_BW_WR_L29                                    0x12031c
2815 /* [RW 10] Bandwidth Typical L for VQ30 Write requests */
2816 #define PXP2_REG_RQ_BW_WR_L30                                    0x120320
2817 /* [RW 7] Bandwidth upper bound for VQ29 */
2818 #define PXP2_REG_RQ_BW_WR_UBOUND29                               0x1202a4
2819 /* [RW 7] Bandwidth upper bound for VQ30 */
2820 #define PXP2_REG_RQ_BW_WR_UBOUND30                               0x1202a8
2821 /* [RW 18] external first_mem_addr field in L2P table for CDU module port 0 */
2822 #define PXP2_REG_RQ_CDU0_EFIRST_MEM_ADDR                         0x120008
2823 /* [RW 2] Endian mode for cdu */
2824 #define PXP2_REG_RQ_CDU_ENDIAN_M                                 0x1201a0
2825 #define PXP2_REG_RQ_CDU_FIRST_ILT                                0x12061c
2826 #define PXP2_REG_RQ_CDU_LAST_ILT                                 0x120620
2827 /* [RW 3] page size in L2P table for CDU module; -4k; -8k; -16k; -32k; -64k;
2828    -128k */
2829 #define PXP2_REG_RQ_CDU_P_SIZE                                   0x120018
2830 /* [R 1] 1' indicates that the requester has finished its internal
2831    configuration */
2832 #define PXP2_REG_RQ_CFG_DONE                                     0x1201b4
2833 /* [RW 2] Endian mode for debug */
2834 #define PXP2_REG_RQ_DBG_ENDIAN_M                                 0x1201a4
2835 /* [RW 1] When '1'; requests will enter input buffers but wont get out
2836    towards the glue */
2837 #define PXP2_REG_RQ_DISABLE_INPUTS                               0x120330
2838 /* [RW 4] Determines alignment of write SRs when a request is split into
2839  * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
2840  * aligned. 4 - 512B aligned. */
2841 #define PXP2_REG_RQ_DRAM_ALIGN                                   0x1205b0
2842 /* [RW 4] Determines alignment of read SRs when a request is split into
2843  * several SRs. 0 - 8B aligned. 1 - 64B aligned. 2 - 128B aligned. 3 - 256B
2844  * aligned. 4 - 512B aligned. */
2845 #define PXP2_REG_RQ_DRAM_ALIGN_RD                                0x12092c
2846 /* [RW 1] when set the new alignment method (E2) will be applied; when reset
2847  * the original alignment method (E1 E1H) will be applied */
2848 #define PXP2_REG_RQ_DRAM_ALIGN_SEL                               0x120930
2849 /* [RW 1] If 1 ILT failiue will not result in ELT access; An interrupt will
2850    be asserted */
2851 #define PXP2_REG_RQ_ELT_DISABLE                                  0x12066c
2852 /* [RW 2] Endian mode for hc */
2853 #define PXP2_REG_RQ_HC_ENDIAN_M                                  0x1201a8
2854 /* [RW 1] when '0' ILT logic will work as in A0; otherwise B0; for back
2855    compatibility needs; Note that different registers are used per mode */
2856 #define PXP2_REG_RQ_ILT_MODE                                     0x1205b4
2857 /* [WB 53] Onchip address table */
2858 #define PXP2_REG_RQ_ONCHIP_AT                                    0x122000
2859 /* [WB 53] Onchip address table - B0 */
2860 #define PXP2_REG_RQ_ONCHIP_AT_B0                                 0x128000
2861 /* [RW 13] Pending read limiter threshold; in Dwords */
2862 #define PXP2_REG_RQ_PDR_LIMIT                                    0x12033c
2863 /* [RW 2] Endian mode for qm */
2864 #define PXP2_REG_RQ_QM_ENDIAN_M                                  0x120194
2865 #define PXP2_REG_RQ_QM_FIRST_ILT                                 0x120634
2866 #define PXP2_REG_RQ_QM_LAST_ILT                                  0x120638
2867 /* [RW 3] page size in L2P table for QM module; -4k; -8k; -16k; -32k; -64k;
2868    -128k */
2869 #define PXP2_REG_RQ_QM_P_SIZE                                    0x120050
2870 /* [RW 1] 1' indicates that the RBC has finished configuring the PSWRQ */
2871 #define PXP2_REG_RQ_RBC_DONE                                     0x1201b0
2872 /* [RW 3] Max burst size filed for read requests port 0; 000 - 128B;
2873    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2874 #define PXP2_REG_RQ_RD_MBS0                                      0x120160
2875 /* [RW 3] Max burst size filed for read requests port 1; 000 - 128B;
2876    001:256B; 010: 512B; 11:1K:100:2K; 01:4K */
2877 #define PXP2_REG_RQ_RD_MBS1                                      0x120168
2878 /* [RW 2] Endian mode for src */
2879 #define PXP2_REG_RQ_SRC_ENDIAN_M                                 0x12019c
2880 #define PXP2_REG_RQ_SRC_FIRST_ILT                                0x12063c
2881 #define PXP2_REG_RQ_SRC_LAST_ILT                                 0x120640
2882 /* [RW 3] page size in L2P table for SRC module; -4k; -8k; -16k; -32k; -64k;
2883    -128k */
2884 #define PXP2_REG_RQ_SRC_P_SIZE                                   0x12006c
2885 /* [RW 2] Endian mode for tm */
2886 #define PXP2_REG_RQ_TM_ENDIAN_M                                  0x120198
2887 #define PXP2_REG_RQ_TM_FIRST_ILT                                 0x120644
2888 #define PXP2_REG_RQ_TM_LAST_ILT                                  0x120648
2889 /* [RW 3] page size in L2P table for TM module; -4k; -8k; -16k; -32k; -64k;
2890    -128k */
2891 #define PXP2_REG_RQ_TM_P_SIZE                                    0x120034
2892 /* [R 5] Number of entries in the ufifo; his fifo has l2p completions */
2893 #define PXP2_REG_RQ_UFIFO_NUM_OF_ENTRY                           0x12080c
2894 /* [RW 18] external first_mem_addr field in L2P table for USDM module port 0 */
2895 #define PXP2_REG_RQ_USDM0_EFIRST_MEM_ADDR                        0x120094
2896 /* [R 8] Number of entries occupied by vq 0 in pswrq memory */
2897 #define PXP2_REG_RQ_VQ0_ENTRY_CNT                                0x120810
2898 /* [R 8] Number of entries occupied by vq 10 in pswrq memory */
2899 #define PXP2_REG_RQ_VQ10_ENTRY_CNT                               0x120818
2900 /* [R 8] Number of entries occupied by vq 11 in pswrq memory */
2901 #define PXP2_REG_RQ_VQ11_ENTRY_CNT                               0x120820
2902 /* [R 8] Number of entries occupied by vq 12 in pswrq memory */
2903 #define PXP2_REG_RQ_VQ12_ENTRY_CNT                               0x120828
2904 /* [R 8] Number of entries occupied by vq 13 in pswrq memory */
2905 #define PXP2_REG_RQ_VQ13_ENTRY_CNT                               0x120830
2906 /* [R 8] Number of entries occupied by vq 14 in pswrq memory */
2907 #define PXP2_REG_RQ_VQ14_ENTRY_CNT                               0x120838
2908 /* [R 8] Number of entries occupied by vq 15 in pswrq memory */
2909 #define PXP2_REG_RQ_VQ15_ENTRY_CNT                               0x120840
2910 /* [R 8] Number of entries occupied by vq 16 in pswrq memory */
2911 #define PXP2_REG_RQ_VQ16_ENTRY_CNT                               0x120848
2912 /* [R 8] Number of entries occupied by vq 17 in pswrq memory */
2913 #define PXP2_REG_RQ_VQ17_ENTRY_CNT                               0x120850
2914 /* [R 8] Number of entries occupied by vq 18 in pswrq memory */
2915 #define PXP2_REG_RQ_VQ18_ENTRY_CNT                               0x120858
2916 /* [R 8] Number of entries occupied by vq 19 in pswrq memory */
2917 #define PXP2_REG_RQ_VQ19_ENTRY_CNT                               0x120860
2918 /* [R 8] Number of entries occupied by vq 1 in pswrq memory */
2919 #define PXP2_REG_RQ_VQ1_ENTRY_CNT                                0x120868
2920 /* [R 8] Number of entries occupied by vq 20 in pswrq memory */
2921 #define PXP2_REG_RQ_VQ20_ENTRY_CNT                               0x120870
2922 /* [R 8] Number of entries occupied by vq 21 in pswrq memory */
2923 #define PXP2_REG_RQ_VQ21_ENTRY_CNT                               0x120878
2924 /* [R 8] Number of entries occupied by vq 22 in pswrq memory */
2925 #define PXP2_REG_RQ_VQ22_ENTRY_CNT                               0x120880
2926 /* [R 8] Number of entries occupied by vq 23 in pswrq memory */
2927 #define PXP2_REG_RQ_VQ23_ENTRY_CNT                               0x120888
2928 /* [R 8] Number of entries occupied by vq 24 in pswrq memory */
2929 #define PXP2_REG_RQ_VQ24_ENTRY_CNT                               0x120890
2930 /* [R 8] Number of entries occupied by vq 25 in pswrq memory */
2931 #define PXP2_REG_RQ_VQ25_ENTRY_CNT                               0x120898
2932 /* [R 8] Number of entries occupied by vq 26 in pswrq memory */
2933 #define PXP2_REG_RQ_VQ26_ENTRY_CNT                               0x1208a0
2934 /* [R 8] Number of entries occupied by vq 27 in pswrq memory */
2935 #define PXP2_REG_RQ_VQ27_ENTRY_CNT                               0x1208a8
2936 /* [R 8] Number of entries occupied by vq 28 in pswrq memory */
2937 #define PXP2_REG_RQ_VQ28_ENTRY_CNT                               0x1208b0
2938 /* [R 8] Number of entries occupied by vq 29 in pswrq memory */
2939 #define PXP2_REG_RQ_VQ29_ENTRY_CNT                               0x1208b8
2940 /* [R 8] Number of entries occupied by vq 2 in pswrq memory */
2941 #define PXP2_REG_RQ_VQ2_ENTRY_CNT                                0x1208c0
2942 /* [R 8] Number of entries occupied by vq 30 in pswrq memory */
2943 #define PXP2_REG_RQ_VQ30_ENTRY_CNT                               0x1208c8
2944 /* [R 8] Number of entries occupied by vq 31 in pswrq memory */
2945 #define PXP2_REG_RQ_VQ31_ENTRY_CNT                               0x1208d0
2946 /* [R 8] Number of entries occupied by vq 3 in pswrq memory */
2947 #define PXP2_REG_RQ_VQ3_ENTRY_CNT                                0x1208d8
2948 /* [R 8] Number of entries occupied by vq 4 in pswrq memory */
2949 #define PXP2_REG_RQ_VQ4_ENTRY_CNT                                0x1208e0
2950 /* [R 8] Number of entries occupied by vq 5 in pswrq memory */
2951 #define PXP2_REG_RQ_VQ5_ENTRY_CNT                                0x1208e8
2952 /* [R 8] Number of entries occupied by vq 6 in pswrq memory */
2953 #define PXP2_REG_RQ_VQ6_ENTRY_CNT                                0x1208f0
2954 /* [R 8] Number of entries occupied by vq 7 in pswrq memory */
2955 #define PXP2_REG_RQ_VQ7_ENTRY_CNT                                0x1208f8
2956 /* [R 8] Number of entries occupied by vq 8 in pswrq memory */
2957 #define PXP2_REG_RQ_VQ8_ENTRY_CNT                                0x120900
2958 /* [R 8] Number of entries occupied by vq 9 in pswrq memory */
2959 #define PXP2_REG_RQ_VQ9_ENTRY_CNT                                0x120908
2960 /* [RW 3] Max burst size filed for write requests port 0; 000 - 128B;
2961    001:256B; 010: 512B; */
2962 #define PXP2_REG_RQ_WR_MBS0                                      0x12015c
2963 /* [RW 3] Max burst size filed for write requests port 1; 000 - 128B;
2964    001:256B; 010: 512B; */
2965 #define PXP2_REG_RQ_WR_MBS1                                      0x120164
2966 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2967    buffer reaches this number has_payload will be asserted */
2968 #define PXP2_REG_WR_CDU_MPS                                      0x1205f0
2969 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2970    buffer reaches this number has_payload will be asserted */
2971 #define PXP2_REG_WR_CSDM_MPS                                     0x1205d0
2972 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2973    buffer reaches this number has_payload will be asserted */
2974 #define PXP2_REG_WR_DBG_MPS                                      0x1205e8
2975 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2976    buffer reaches this number has_payload will be asserted */
2977 #define PXP2_REG_WR_DMAE_MPS                                     0x1205ec
2978 /* [RW 10] if Number of entries in dmae fifo will be higher than this
2979    threshold then has_payload indication will be asserted; the default value
2980    should be equal to &gt;  write MBS size! */
2981 #define PXP2_REG_WR_DMAE_TH                                      0x120368
2982 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2983    buffer reaches this number has_payload will be asserted */
2984 #define PXP2_REG_WR_HC_MPS                                       0x1205c8
2985 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2986    buffer reaches this number has_payload will be asserted */
2987 #define PXP2_REG_WR_QM_MPS                                       0x1205dc
2988 /* [RW 1] 0 - working in A0 mode;  - working in B0 mode */
2989 #define PXP2_REG_WR_REV_MODE                                     0x120670
2990 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2991    buffer reaches this number has_payload will be asserted */
2992 #define PXP2_REG_WR_SRC_MPS                                      0x1205e4
2993 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2994    buffer reaches this number has_payload will be asserted */
2995 #define PXP2_REG_WR_TM_MPS                                       0x1205e0
2996 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
2997    buffer reaches this number has_payload will be asserted */
2998 #define PXP2_REG_WR_TSDM_MPS                                     0x1205d4
2999 /* [RW 10] if Number of entries in usdmdp fifo will be higher than this
3000    threshold then has_payload indication will be asserted; the default value
3001    should be equal to &gt;  write MBS size! */
3002 #define PXP2_REG_WR_USDMDP_TH                                    0x120348
3003 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
3004    buffer reaches this number has_payload will be asserted */
3005 #define PXP2_REG_WR_USDM_MPS                                     0x1205cc
3006 /* [RW 2] 0 - 128B;  - 256B;  - 512B;  - 1024B; when the payload in the
3007    buffer reaches this number has_payload will be asserted */
3008 #define PXP2_REG_WR_XSDM_MPS                                     0x1205d8
3009 /* [R 1] debug only: Indication if PSWHST arbiter is idle */
3010 #define PXP_REG_HST_ARB_IS_IDLE                                  0x103004
3011 /* [R 8] debug only: A bit mask for all PSWHST arbiter clients. '1' means
3012    this client is waiting for the arbiter. */
3013 #define PXP_REG_HST_CLIENTS_WAITING_TO_ARB                       0x103008
3014 /* [RW 1] When 1; doorbells are discarded and not passed to doorbell queue
3015    block. Should be used for close the gates. */
3016 #define PXP_REG_HST_DISCARD_DOORBELLS                            0x1030a4
3017 /* [R 1] debug only: '1' means this PSWHST is discarding doorbells. This bit
3018    should update according to 'hst_discard_doorbells' register when the state
3019    machine is idle */
3020 #define PXP_REG_HST_DISCARD_DOORBELLS_STATUS                     0x1030a0
3021 /* [RW 1] When 1; new internal writes arriving to the block are discarded.
3022    Should be used for close the gates. */
3023 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES                      0x1030a8
3024 /* [R 6] debug only: A bit mask for all PSWHST internal write clients. '1'
3025    means this PSWHST is discarding inputs from this client. Each bit should
3026    update according to 'hst_discard_internal_writes' register when the state
3027    machine is idle. */
3028 #define PXP_REG_HST_DISCARD_INTERNAL_WRITES_STATUS               0x10309c
3029 /* [WB 160] Used for initialization of the inbound interrupts memory */
3030 #define PXP_REG_HST_INBOUND_INT                                  0x103800
3031 /* [RW 32] Interrupt mask register #0 read/write */
3032 #define PXP_REG_PXP_INT_MASK_0                                   0x103074
3033 #define PXP_REG_PXP_INT_MASK_1                                   0x103084
3034 /* [R 32] Interrupt register #0 read */
3035 #define PXP_REG_PXP_INT_STS_0                                    0x103068
3036 #define PXP_REG_PXP_INT_STS_1                                    0x103078
3037 /* [RC 32] Interrupt register #0 read clear */
3038 #define PXP_REG_PXP_INT_STS_CLR_0                                0x10306c
3039 #define PXP_REG_PXP_INT_STS_CLR_1                                0x10307c
3040 /* [RW 27] Parity mask register #0 read/write */
3041 #define PXP_REG_PXP_PRTY_MASK                                    0x103094
3042 /* [R 26] Parity register #0 read */
3043 #define PXP_REG_PXP_PRTY_STS                                     0x103088
3044 /* [RC 27] Parity register #0 read clear */
3045 #define PXP_REG_PXP_PRTY_STS_CLR                                 0x10308c
3046 /* [RW 4] The activity counter initial increment value sent in the load
3047    request */
3048 #define QM_REG_ACTCTRINITVAL_0                                   0x168040
3049 #define QM_REG_ACTCTRINITVAL_1                                   0x168044
3050 #define QM_REG_ACTCTRINITVAL_2                                   0x168048
3051 #define QM_REG_ACTCTRINITVAL_3                                   0x16804c
3052 /* [RW 32] The base logical address (in bytes) of each physical queue. The
3053    index I represents the physical queue number. The 12 lsbs are ignore and
3054    considered zero so practically there are only 20 bits in this register;
3055    queues 63-0 */
3056 #define QM_REG_BASEADDR                                          0x168900
3057 /* [RW 32] The base logical address (in bytes) of each physical queue. The
3058    index I represents the physical queue number. The 12 lsbs are ignore and
3059    considered zero so practically there are only 20 bits in this register;
3060    queues 127-64 */
3061 #define QM_REG_BASEADDR_EXT_A                                    0x16e100
3062 /* [RW 16] The byte credit cost for each task. This value is for both ports */
3063 #define QM_REG_BYTECRDCOST                                       0x168234
3064 /* [RW 16] The initial byte credit value for both ports. */
3065 #define QM_REG_BYTECRDINITVAL                                    0x168238
3066 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3067    queue uses port 0 else it uses port 1; queues 31-0 */
3068 #define QM_REG_BYTECRDPORT_LSB                                   0x168228
3069 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3070    queue uses port 0 else it uses port 1; queues 95-64 */
3071 #define QM_REG_BYTECRDPORT_LSB_EXT_A                             0x16e520
3072 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3073    queue uses port 0 else it uses port 1; queues 63-32 */
3074 #define QM_REG_BYTECRDPORT_MSB                                   0x168224
3075 /* [RW 32] A bit per physical queue. If the bit is cleared then the physical
3076    queue uses port 0 else it uses port 1; queues 127-96 */
3077 #define QM_REG_BYTECRDPORT_MSB_EXT_A                             0x16e51c
3078 /* [RW 16] The byte credit value that if above the QM is considered almost
3079    full */
3080 #define QM_REG_BYTECREDITAFULLTHR                                0x168094
3081 /* [RW 4] The initial credit for interface */
3082 #define QM_REG_CMINITCRD_0                                       0x1680cc
3083 #define QM_REG_CMINITCRD_1                                       0x1680d0
3084 #define QM_REG_CMINITCRD_2                                       0x1680d4
3085 #define QM_REG_CMINITCRD_3                                       0x1680d8
3086 #define QM_REG_CMINITCRD_4                                       0x1680dc
3087 #define QM_REG_CMINITCRD_5                                       0x1680e0
3088 #define QM_REG_CMINITCRD_6                                       0x1680e4
3089 #define QM_REG_CMINITCRD_7                                       0x1680e8
3090 /* [RW 8] A mask bit per CM interface. If this bit is 0 then this interface
3091    is masked */
3092 #define QM_REG_CMINTEN                                           0x1680ec
3093 /* [RW 12] A bit vector which indicates which one of the queues are tied to
3094    interface 0 */
3095 #define QM_REG_CMINTVOQMASK_0                                    0x1681f4
3096 #define QM_REG_CMINTVOQMASK_1                                    0x1681f8
3097 #define QM_REG_CMINTVOQMASK_2                                    0x1681fc
3098 #define QM_REG_CMINTVOQMASK_3                                    0x168200
3099 #define QM_REG_CMINTVOQMASK_4                                    0x168204
3100 #define QM_REG_CMINTVOQMASK_5                                    0x168208
3101 #define QM_REG_CMINTVOQMASK_6                                    0x16820c
3102 #define QM_REG_CMINTVOQMASK_7                                    0x168210
3103 /* [RW 20] The number of connections divided by 16 which dictates the size
3104    of each queue which belongs to even function number. */
3105 #define QM_REG_CONNNUM_0                                         0x168020
3106 /* [R 6] Keep the fill level of the fifo from write client 4 */
3107 #define QM_REG_CQM_WRC_FIFOLVL                                   0x168018
3108 /* [RW 8] The context regions sent in the CFC load request */
3109 #define QM_REG_CTXREG_0                                          0x168030
3110 #define QM_REG_CTXREG_1                                          0x168034
3111 #define QM_REG_CTXREG_2                                          0x168038
3112 #define QM_REG_CTXREG_3                                          0x16803c
3113 /* [RW 12] The VOQ mask used to select the VOQs which needs to be full for
3114    bypass enable */
3115 #define QM_REG_ENBYPVOQMASK                                      0x16823c
3116 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
3117    physical queue uses the byte credit; queues 31-0 */
3118 #define QM_REG_ENBYTECRD_LSB                                     0x168220
3119 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
3120    physical queue uses the byte credit; queues 95-64 */
3121 #define QM_REG_ENBYTECRD_LSB_EXT_A                               0x16e518
3122 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
3123    physical queue uses the byte credit; queues 63-32 */
3124 #define QM_REG_ENBYTECRD_MSB                                     0x16821c
3125 /* [RW 32] A bit mask per each physical queue. If a bit is set then the
3126    physical queue uses the byte credit; queues 127-96 */
3127 #define QM_REG_ENBYTECRD_MSB_EXT_A                               0x16e514
3128 /* [RW 4] If cleared then the secondary interface will not be served by the
3129    RR arbiter */
3130 #define QM_REG_ENSEC                                             0x1680f0
3131 /* [RW 32] NA */
3132 #define QM_REG_FUNCNUMSEL_LSB                                    0x168230
3133 /* [RW 32] NA */
3134 #define QM_REG_FUNCNUMSEL_MSB                                    0x16822c
3135 /* [RW 32] A mask register to mask the Almost empty signals which will not
3136    be use for the almost empty indication to the HW block; queues 31:0 */
3137 #define QM_REG_HWAEMPTYMASK_LSB                                  0x168218
3138 /* [RW 32] A mask register to mask the Almost empty signals which will not
3139    be use for the almost empty indication to the HW block; queues 95-64 */
3140 #define QM_REG_HWAEMPTYMASK_LSB_EXT_A                            0x16e510
3141 /* [RW 32] A mask register to mask the Almost empty signals which will not
3142    be use for the almost empty indication to the HW block; queues 63:32 */
3143 #define QM_REG_HWAEMPTYMASK_MSB                                  0x168214
3144 /* [RW 32] A mask register to mask the Almost empty signals which will not
3145    be use for the almost empty indication to the HW block; queues 127-96 */
3146 #define QM_REG_HWAEMPTYMASK_MSB_EXT_A                            0x16e50c
3147 /* [RW 4] The number of outstanding request to CFC */
3148 #define QM_REG_OUTLDREQ                                          0x168804
3149 /* [RC 1] A flag to indicate that overflow error occurred in one of the
3150    queues. */
3151 #define QM_REG_OVFERROR                                          0x16805c
3152 /* [RC 7] the Q where the overflow occurs */
3153 #define QM_REG_OVFQNUM                                           0x168058
3154 /* [R 16] Pause state for physical queues 15-0 */
3155 #define QM_REG_PAUSESTATE0                                       0x168410
3156 /* [R 16] Pause state for physical queues 31-16 */
3157 #define QM_REG_PAUSESTATE1                                       0x168414
3158 /* [R 16] Pause state for physical queues 47-32 */
3159 #define QM_REG_PAUSESTATE2                                       0x16e684
3160 /* [R 16] Pause state for physical queues 63-48 */
3161 #define QM_REG_PAUSESTATE3                                       0x16e688
3162 /* [R 16] Pause state for physical queues 79-64 */
3163 #define QM_REG_PAUSESTATE4                                       0x16e68c
3164 /* [R 16] Pause state for physical queues 95-80 */
3165 #define QM_REG_PAUSESTATE5                                       0x16e690
3166 /* [R 16] Pause state for physical queues 111-96 */
3167 #define QM_REG_PAUSESTATE6                                       0x16e694
3168 /* [R 16] Pause state for physical queues 127-112 */
3169 #define QM_REG_PAUSESTATE7                                       0x16e698
3170 /* [RW 2] The PCI attributes field used in the PCI request. */
3171 #define QM_REG_PCIREQAT                                          0x168054
3172 #define QM_REG_PF_EN                                             0x16e70c
3173 /* [R 16] The byte credit of port 0 */
3174 #define QM_REG_PORT0BYTECRD                                      0x168300
3175 /* [R 16] The byte credit of port 1 */
3176 #define QM_REG_PORT1BYTECRD                                      0x168304
3177 /* [RW 3] pci function number of queues 15-0 */
3178 #define QM_REG_PQ2PCIFUNC_0                                      0x16e6bc
3179 #define QM_REG_PQ2PCIFUNC_1                                      0x16e6c0
3180 #define QM_REG_PQ2PCIFUNC_2                                      0x16e6c4
3181 #define QM_REG_PQ2PCIFUNC_3                                      0x16e6c8
3182 #define QM_REG_PQ2PCIFUNC_4                                      0x16e6cc
3183 #define QM_REG_PQ2PCIFUNC_5                                      0x16e6d0
3184 #define QM_REG_PQ2PCIFUNC_6                                      0x16e6d4
3185 #define QM_REG_PQ2PCIFUNC_7                                      0x16e6d8
3186 /* [WB 54] Pointer Table Memory for queues 63-0; The mapping is as follow:
3187    ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
3188    bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
3189 #define QM_REG_PTRTBL                                            0x168a00
3190 /* [WB 54] Pointer Table Memory for queues 127-64; The mapping is as follow:
3191    ptrtbl[53:30] read pointer; ptrtbl[29:6] write pointer; ptrtbl[5:4] read
3192    bank0; ptrtbl[3:2] read bank 1; ptrtbl[1:0] write bank; */
3193 #define QM_REG_PTRTBL_EXT_A                                      0x16e200
3194 /* [RW 2] Interrupt mask register #0 read/write */
3195 #define QM_REG_QM_INT_MASK                                       0x168444
3196 /* [R 2] Interrupt register #0 read */
3197 #define QM_REG_QM_INT_STS                                        0x168438
3198 /* [RW 12] Parity mask register #0 read/write */
3199 #define QM_REG_QM_PRTY_MASK                                      0x168454
3200 /* [R 12] Parity register #0 read */
3201 #define QM_REG_QM_PRTY_STS                                       0x168448
3202 /* [RC 12] Parity register #0 read clear */
3203 #define QM_REG_QM_PRTY_STS_CLR                                   0x16844c
3204 /* [R 32] Current queues in pipeline: Queues from 32 to 63 */
3205 #define QM_REG_QSTATUS_HIGH                                      0x16802c
3206 /* [R 32] Current queues in pipeline: Queues from 96 to 127 */
3207 #define QM_REG_QSTATUS_HIGH_EXT_A                                0x16e408
3208 /* [R 32] Current queues in pipeline: Queues from 0 to 31 */
3209 #define QM_REG_QSTATUS_LOW                                       0x168028
3210 /* [R 32] Current queues in pipeline: Queues from 64 to 95 */
3211 #define QM_REG_QSTATUS_LOW_EXT_A                                 0x16e404
3212 /* [R 24] The number of tasks queued for each queue; queues 63-0 */
3213 #define QM_REG_QTASKCTR_0                                        0x168308
3214 /* [R 24] The number of tasks queued for each queue; queues 127-64 */
3215 #define QM_REG_QTASKCTR_EXT_A_0                                  0x16e584
3216 /* [RW 4] Queue tied to VOQ */
3217 #define QM_REG_QVOQIDX_0                                         0x1680f4
3218 #define QM_REG_QVOQIDX_10                                        0x16811c
3219 #define QM_REG_QVOQIDX_100                                       0x16e49c
3220 #define QM_REG_QVOQIDX_101                                       0x16e4a0
3221 #define QM_REG_QVOQIDX_102                                       0x16e4a4
3222 #define QM_REG_QVOQIDX_103                                       0x16e4a8
3223 #define QM_REG_QVOQIDX_104                                       0x16e4ac
3224 #define QM_REG_QVOQIDX_105                                       0x16e4b0
3225 #define QM_REG_QVOQIDX_106                                       0x16e4b4
3226 #define QM_REG_QVOQIDX_107                                       0x16e4b8
3227 #define QM_REG_QVOQIDX_108                                       0x16e4bc
3228 #define QM_REG_QVOQIDX_109                                       0x16e4c0
3229 #define QM_REG_QVOQIDX_11                                        0x168120
3230 #define QM_REG_QVOQIDX_110                                       0x16e4c4
3231 #define QM_REG_QVOQIDX_111                                       0x16e4c8
3232 #define QM_REG_QVOQIDX_112                                       0x16e4cc
3233 #define QM_REG_QVOQIDX_113                                       0x16e4d0
3234 #define QM_REG_QVOQIDX_114                                       0x16e4d4
3235 #define QM_REG_QVOQIDX_115                                       0x16e4d8
3236 #define QM_REG_QVOQIDX_116                                       0x16e4dc
3237 #define QM_REG_QVOQIDX_117                                       0x16e4e0
3238 #define QM_REG_QVOQIDX_118                                       0x16e4e4
3239 #define QM_REG_QVOQIDX_119                                       0x16e4e8
3240 #define QM_REG_QVOQIDX_12                                        0x168124
3241 #define QM_REG_QVOQIDX_120                                       0x16e4ec
3242 #define QM_REG_QVOQIDX_121                                       0x16e4f0
3243 #define QM_REG_QVOQIDX_122                                       0x16e4f4
3244 #define QM_REG_QVOQIDX_123                                       0x16e4f8
3245 #define QM_REG_QVOQIDX_124                                       0x16e4fc
3246 #define QM_REG_QVOQIDX_125                                       0x16e500
3247 #define QM_REG_QVOQIDX_126                                       0x16e504
3248 #define QM_REG_QVOQIDX_127                                       0x16e508
3249 #define QM_REG_QVOQIDX_13                                        0x168128
3250 #define QM_REG_QVOQIDX_14                                        0x16812c
3251 #define QM_REG_QVOQIDX_15                                        0x168130
3252 #define QM_REG_QVOQIDX_16                                        0x168134
3253 #define QM_REG_QVOQIDX_17                                        0x168138
3254 #define QM_REG_QVOQIDX_21                                        0x168148
3255 #define QM_REG_QVOQIDX_22                                        0x16814c
3256 #define QM_REG_QVOQIDX_23                                        0x168150
3257 #define QM_REG_QVOQIDX_24                                        0x168154
3258 #define QM_REG_QVOQIDX_25                                        0x168158
3259 #define QM_REG_QVOQIDX_26                                        0x16815c
3260 #define QM_REG_QVOQIDX_27                                        0x168160
3261 #define QM_REG_QVOQIDX_28                                        0x168164
3262 #define QM_REG_QVOQIDX_29                                        0x168168
3263 #define QM_REG_QVOQIDX_30                                        0x16816c
3264 #define QM_REG_QVOQIDX_31                                        0x168170
3265 #define QM_REG_QVOQIDX_32                                        0x168174
3266 #define QM_REG_QVOQIDX_33                                        0x168178
3267 #define QM_REG_QVOQIDX_34                                        0x16817c
3268 #define QM_REG_QVOQIDX_35                                        0x168180
3269 #define QM_REG_QVOQIDX_36                                        0x168184
3270 #define QM_REG_QVOQIDX_37                                        0x168188
3271 #define QM_REG_QVOQIDX_38                                        0x16818c
3272 #define QM_REG_QVOQIDX_39                                        0x168190
3273 #define QM_REG_QVOQIDX_40                                        0x168194
3274 #define QM_REG_QVOQIDX_41                                        0x168198
3275 #define QM_REG_QVOQIDX_42                                        0x16819c
3276 #define QM_REG_QVOQIDX_43                                        0x1681a0
3277 #define QM_REG_QVOQIDX_44                                        0x1681a4
3278 #define QM_REG_QVOQIDX_45                                        0x1681a8
3279 #define QM_REG_QVOQIDX_46                                        0x1681ac
3280 #define QM_REG_QVOQIDX_47                                        0x1681b0
3281 #define QM_REG_QVOQIDX_48                                        0x1681b4
3282 #define QM_REG_QVOQIDX_49                                        0x1681b8
3283 #define QM_REG_QVOQIDX_5                                         0x168108
3284 #define QM_REG_QVOQIDX_50                                        0x1681bc
3285 #define QM_REG_QVOQIDX_51                                        0x1681c0
3286 #define QM_REG_QVOQIDX_52                                        0x1681c4
3287 #define QM_REG_QVOQIDX_53                                        0x1681c8
3288 #define QM_REG_QVOQIDX_54                                        0x1681cc
3289 #define QM_REG_QVOQIDX_55                                        0x1681d0
3290 #define QM_REG_QVOQIDX_56                                        0x1681d4
3291 #define QM_REG_QVOQIDX_57                                        0x1681d8
3292 #define QM_REG_QVOQIDX_58                                        0x1681dc
3293 #define QM_REG_QVOQIDX_59                                        0x1681e0
3294 #define QM_REG_QVOQIDX_6                                         0x16810c
3295 #define QM_REG_QVOQIDX_60                                        0x1681e4
3296 #define QM_REG_QVOQIDX_61                                        0x1681e8
3297 #define QM_REG_QVOQIDX_62                                        0x1681ec
3298 #define QM_REG_QVOQIDX_63                                        0x1681f0
3299 #define QM_REG_QVOQIDX_64                                        0x16e40c
3300 #define QM_REG_QVOQIDX_65                                        0x16e410
3301 #define QM_REG_QVOQIDX_69                                        0x16e420
3302 #define QM_REG_QVOQIDX_7                                         0x168110
3303 #define QM_REG_QVOQIDX_70                                        0x16e424
3304 #define QM_REG_QVOQIDX_71                                        0x16e428
3305 #define QM_REG_QVOQIDX_72                                        0x16e42c
3306 #define QM_REG_QVOQIDX_73                                        0x16e430
3307 #define QM_REG_QVOQIDX_74                                        0x16e434
3308 #define QM_REG_QVOQIDX_75                                        0x16e438
3309 #define QM_REG_QVOQIDX_76                                        0x16e43c
3310 #define QM_REG_QVOQIDX_77                                        0x16e440
3311 #define QM_REG_QVOQIDX_78                                        0x16e444
3312 #define QM_REG_QVOQIDX_79                                        0x16e448
3313 #define QM_REG_QVOQIDX_8                                         0x168114
3314 #define QM_REG_QVOQIDX_80                                        0x16e44c
3315 #define QM_REG_QVOQIDX_81                                        0x16e450
3316 #define QM_REG_QVOQIDX_85                                        0x16e460
3317 #define QM_REG_QVOQIDX_86                                        0x16e464
3318 #define QM_REG_QVOQIDX_87                                        0x16e468
3319 #define QM_REG_QVOQIDX_88                                        0x16e46c
3320 #define QM_REG_QVOQIDX_89                                        0x16e470
3321 #define QM_REG_QVOQIDX_9                                         0x168118
3322 #define QM_REG_QVOQIDX_90                                        0x16e474
3323 #define QM_REG_QVOQIDX_91                                        0x16e478
3324 #define QM_REG_QVOQIDX_92                                        0x16e47c
3325 #define QM_REG_QVOQIDX_93                                        0x16e480
3326 #define QM_REG_QVOQIDX_94                                        0x16e484
3327 #define QM_REG_QVOQIDX_95                                        0x16e488
3328 #define QM_REG_QVOQIDX_96                                        0x16e48c
3329 #define QM_REG_QVOQIDX_97                                        0x16e490
3330 #define QM_REG_QVOQIDX_98                                        0x16e494
3331 #define QM_REG_QVOQIDX_99                                        0x16e498
3332 /* [RW 1] Initialization bit command */
3333 #define QM_REG_SOFT_RESET                                        0x168428
3334 /* [RW 8] The credit cost per every task in the QM. A value per each VOQ */
3335 #define QM_REG_TASKCRDCOST_0                                     0x16809c
3336 #define QM_REG_TASKCRDCOST_1                                     0x1680a0
3337 #define QM_REG_TASKCRDCOST_2                                     0x1680a4
3338 #define QM_REG_TASKCRDCOST_4                                     0x1680ac
3339 #define QM_REG_TASKCRDCOST_5                                     0x1680b0
3340 /* [R 6] Keep the fill level of the fifo from write client 3 */
3341 #define QM_REG_TQM_WRC_FIFOLVL                                   0x168010
3342 /* [R 6] Keep the fill level of the fifo from write client 2 */
3343 #define QM_REG_UQM_WRC_FIFOLVL                                   0x168008
3344 /* [RC 32] Credit update error register */
3345 #define QM_REG_VOQCRDERRREG                                      0x168408
3346 /* [R 16] The credit value for each VOQ */
3347 #define QM_REG_VOQCREDIT_0                                       0x1682d0
3348 #define QM_REG_VOQCREDIT_1                                       0x1682d4
3349 #define QM_REG_VOQCREDIT_4                                       0x1682e0
3350 /* [RW 16] The credit value that if above the QM is considered almost full */
3351 #define QM_REG_VOQCREDITAFULLTHR                                 0x168090
3352 /* [RW 16] The init and maximum credit for each VoQ */
3353 #define QM_REG_VOQINITCREDIT_0                                   0x168060
3354 #define QM_REG_VOQINITCREDIT_1                                   0x168064
3355 #define QM_REG_VOQINITCREDIT_2                                   0x168068
3356 #define QM_REG_VOQINITCREDIT_4                                   0x168070
3357 #define QM_REG_VOQINITCREDIT_5                                   0x168074
3358 /* [RW 1] The port of which VOQ belongs */
3359 #define QM_REG_VOQPORT_0                                         0x1682a0
3360 #define QM_REG_VOQPORT_1                                         0x1682a4
3361 #define QM_REG_VOQPORT_2                                         0x1682a8
3362 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3363 #define QM_REG_VOQQMASK_0_LSB                                    0x168240
3364 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3365 #define QM_REG_VOQQMASK_0_LSB_EXT_A                              0x16e524
3366 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3367 #define QM_REG_VOQQMASK_0_MSB                                    0x168244
3368 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3369 #define QM_REG_VOQQMASK_0_MSB_EXT_A                              0x16e528
3370 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3371 #define QM_REG_VOQQMASK_10_LSB                                   0x168290
3372 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3373 #define QM_REG_VOQQMASK_10_LSB_EXT_A                             0x16e574
3374 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3375 #define QM_REG_VOQQMASK_10_MSB                                   0x168294
3376 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3377 #define QM_REG_VOQQMASK_10_MSB_EXT_A                             0x16e578
3378 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3379 #define QM_REG_VOQQMASK_11_LSB                                   0x168298
3380 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3381 #define QM_REG_VOQQMASK_11_LSB_EXT_A                             0x16e57c
3382 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3383 #define QM_REG_VOQQMASK_11_MSB                                   0x16829c
3384 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3385 #define QM_REG_VOQQMASK_11_MSB_EXT_A                             0x16e580
3386 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3387 #define QM_REG_VOQQMASK_1_LSB                                    0x168248
3388 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3389 #define QM_REG_VOQQMASK_1_LSB_EXT_A                              0x16e52c
3390 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3391 #define QM_REG_VOQQMASK_1_MSB                                    0x16824c
3392 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3393 #define QM_REG_VOQQMASK_1_MSB_EXT_A                              0x16e530
3394 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3395 #define QM_REG_VOQQMASK_2_LSB                                    0x168250
3396 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3397 #define QM_REG_VOQQMASK_2_LSB_EXT_A                              0x16e534
3398 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3399 #define QM_REG_VOQQMASK_2_MSB                                    0x168254
3400 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3401 #define QM_REG_VOQQMASK_2_MSB_EXT_A                              0x16e538
3402 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3403 #define QM_REG_VOQQMASK_3_LSB                                    0x168258
3404 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3405 #define QM_REG_VOQQMASK_3_LSB_EXT_A                              0x16e53c
3406 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3407 #define QM_REG_VOQQMASK_3_MSB_EXT_A                              0x16e540
3408 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3409 #define QM_REG_VOQQMASK_4_LSB                                    0x168260
3410 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3411 #define QM_REG_VOQQMASK_4_LSB_EXT_A                              0x16e544
3412 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3413 #define QM_REG_VOQQMASK_4_MSB                                    0x168264
3414 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3415 #define QM_REG_VOQQMASK_4_MSB_EXT_A                              0x16e548
3416 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3417 #define QM_REG_VOQQMASK_5_LSB                                    0x168268
3418 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3419 #define QM_REG_VOQQMASK_5_LSB_EXT_A                              0x16e54c
3420 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3421 #define QM_REG_VOQQMASK_5_MSB                                    0x16826c
3422 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3423 #define QM_REG_VOQQMASK_5_MSB_EXT_A                              0x16e550
3424 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3425 #define QM_REG_VOQQMASK_6_LSB                                    0x168270
3426 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3427 #define QM_REG_VOQQMASK_6_LSB_EXT_A                              0x16e554
3428 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3429 #define QM_REG_VOQQMASK_6_MSB                                    0x168274
3430 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3431 #define QM_REG_VOQQMASK_6_MSB_EXT_A                              0x16e558
3432 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3433 #define QM_REG_VOQQMASK_7_LSB                                    0x168278
3434 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3435 #define QM_REG_VOQQMASK_7_LSB_EXT_A                              0x16e55c
3436 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3437 #define QM_REG_VOQQMASK_7_MSB                                    0x16827c
3438 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3439 #define QM_REG_VOQQMASK_7_MSB_EXT_A                              0x16e560
3440 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3441 #define QM_REG_VOQQMASK_8_LSB                                    0x168280
3442 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3443 #define QM_REG_VOQQMASK_8_LSB_EXT_A                              0x16e564
3444 /* [RW 32] The physical queue number associated with each VOQ; queues 63-32 */
3445 #define QM_REG_VOQQMASK_8_MSB                                    0x168284
3446 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3447 #define QM_REG_VOQQMASK_8_MSB_EXT_A                              0x16e568
3448 /* [RW 32] The physical queue number associated with each VOQ; queues 31-0 */
3449 #define QM_REG_VOQQMASK_9_LSB                                    0x168288
3450 /* [RW 32] The physical queue number associated with each VOQ; queues 95-64 */
3451 #define QM_REG_VOQQMASK_9_LSB_EXT_A                              0x16e56c
3452 /* [RW 32] The physical queue number associated with each VOQ; queues 127-96 */
3453 #define QM_REG_VOQQMASK_9_MSB_EXT_A                              0x16e570
3454 /* [RW 32] Wrr weights */
3455 #define QM_REG_WRRWEIGHTS_0                                      0x16880c
3456 #define QM_REG_WRRWEIGHTS_1                                      0x168810
3457 #define QM_REG_WRRWEIGHTS_10                                     0x168814
3458 #define QM_REG_WRRWEIGHTS_11                                     0x168818
3459 #define QM_REG_WRRWEIGHTS_12                                     0x16881c
3460 #define QM_REG_WRRWEIGHTS_13                                     0x168820
3461 #define QM_REG_WRRWEIGHTS_14                                     0x168824
3462 #define QM_REG_WRRWEIGHTS_15                                     0x168828
3463 #define QM_REG_WRRWEIGHTS_16                                     0x16e000
3464 #define QM_REG_WRRWEIGHTS_17                                     0x16e004
3465 #define QM_REG_WRRWEIGHTS_18                                     0x16e008
3466 #define QM_REG_WRRWEIGHTS_19                                     0x16e00c
3467 #define QM_REG_WRRWEIGHTS_2                                      0x16882c
3468 #define QM_REG_WRRWEIGHTS_20                                     0x16e010
3469 #define QM_REG_WRRWEIGHTS_21                                     0x16e014
3470 #define QM_REG_WRRWEIGHTS_22                                     0x16e018
3471 #define QM_REG_WRRWEIGHTS_23                                     0x16e01c
3472 #define QM_REG_WRRWEIGHTS_24                                     0x16e020
3473 #define QM_REG_WRRWEIGHTS_25                                     0x16e024
3474 #define QM_REG_WRRWEIGHTS_26                                     0x16e028
3475 #define QM_REG_WRRWEIGHTS_27                                     0x16e02c
3476 #define QM_REG_WRRWEIGHTS_28                                     0x16e030
3477 #define QM_REG_WRRWEIGHTS_29                                     0x16e034
3478 #define QM_REG_WRRWEIGHTS_3                                      0x168830
3479 #define QM_REG_WRRWEIGHTS_30                                     0x16e038
3480 #define QM_REG_WRRWEIGHTS_31                                     0x16e03c
3481 #define QM_REG_WRRWEIGHTS_4                                      0x168834
3482 #define QM_REG_WRRWEIGHTS_5                                      0x168838
3483 #define QM_REG_WRRWEIGHTS_6                                      0x16883c
3484 #define QM_REG_WRRWEIGHTS_7                                      0x168840
3485 #define QM_REG_WRRWEIGHTS_8                                      0x168844
3486 #define QM_REG_WRRWEIGHTS_9                                      0x168848
3487 /* [R 6] Keep the fill level of the fifo from write client 1 */
3488 #define QM_REG_XQM_WRC_FIFOLVL                                   0x168000
3489 /* [W 1] reset to parity interrupt */
3490 #define SEM_FAST_REG_PARITY_RST                                  0x18840
3491 #define SRC_REG_COUNTFREE0                                       0x40500
3492 /* [RW 1] If clr the searcher is compatible to E1 A0 - support only two
3493    ports. If set the searcher support 8 functions. */
3494 #define SRC_REG_E1HMF_ENABLE                                     0x404cc
3495 #define SRC_REG_FIRSTFREE0                                       0x40510
3496 #define SRC_REG_KEYRSS0_0                                        0x40408
3497 #define SRC_REG_KEYRSS0_7                                        0x40424
3498 #define SRC_REG_KEYRSS1_9                                        0x40454
3499 #define SRC_REG_KEYSEARCH_0                                      0x40458
3500 #define SRC_REG_KEYSEARCH_1                                      0x4045c
3501 #define SRC_REG_KEYSEARCH_2                                      0x40460
3502 #define SRC_REG_KEYSEARCH_3                                      0x40464
3503 #define SRC_REG_KEYSEARCH_4                                      0x40468
3504 #define SRC_REG_KEYSEARCH_5                                      0x4046c
3505 #define SRC_REG_KEYSEARCH_6                                      0x40470
3506 #define SRC_REG_KEYSEARCH_7                                      0x40474
3507 #define SRC_REG_KEYSEARCH_8                                      0x40478
3508 #define SRC_REG_KEYSEARCH_9                                      0x4047c
3509 #define SRC_REG_LASTFREE0                                        0x40530
3510 #define SRC_REG_NUMBER_HASH_BITS0                                0x40400
3511 /* [RW 1] Reset internal state machines. */
3512 #define SRC_REG_SOFT_RST                                         0x4049c
3513 /* [R 3] Interrupt register #0 read */
3514 #define SRC_REG_SRC_INT_STS                                      0x404ac
3515 /* [RW 3] Parity mask register #0 read/write */
3516 #define SRC_REG_SRC_PRTY_MASK                                    0x404c8
3517 /* [R 3] Parity register #0 read */
3518 #define SRC_REG_SRC_PRTY_STS                                     0x404bc
3519 /* [RC 3] Parity register #0 read clear */
3520 #define SRC_REG_SRC_PRTY_STS_CLR                                 0x404c0
3521 /* [R 4] Used to read the value of the XX protection CAM occupancy counter. */
3522 #define TCM_REG_CAM_OCCUP                                        0x5017c
3523 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
3524    disregarded; valid output is deasserted; all other signals are treated as
3525    usual; if 1 - normal activity. */
3526 #define TCM_REG_CDU_AG_RD_IFEN                                   0x50034
3527 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
3528    are disregarded; all other signals are treated as usual; if 1 - normal
3529    activity. */
3530 #define TCM_REG_CDU_AG_WR_IFEN                                   0x50030
3531 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
3532    disregarded; valid output is deasserted; all other signals are treated as
3533    usual; if 1 - normal activity. */
3534 #define TCM_REG_CDU_SM_RD_IFEN                                   0x5003c
3535 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
3536    input is disregarded; all other signals are treated as usual; if 1 -
3537    normal activity. */
3538 #define TCM_REG_CDU_SM_WR_IFEN                                   0x50038
3539 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
3540    the initial credit value; read returns the current value of the credit
3541    counter. Must be initialized to 1 at start-up. */
3542 #define TCM_REG_CFC_INIT_CRD                                     0x50204
3543 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
3544    weight 8 (the most prioritised); 1 stands for weight 1(least
3545    prioritised); 2 stands for weight 2; tc. */
3546 #define TCM_REG_CP_WEIGHT                                        0x500c0
3547 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
3548    disregarded; acknowledge output is deasserted; all other signals are
3549    treated as usual; if 1 - normal activity. */
3550 #define TCM_REG_CSEM_IFEN                                        0x5002c
3551 /* [RC 1] Message length mismatch (relative to last indication) at the In#9
3552    interface. */
3553 #define TCM_REG_CSEM_LENGTH_MIS                                  0x50174
3554 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
3555    weight 8 (the most prioritised); 1 stands for weight 1(least
3556    prioritised); 2 stands for weight 2; tc. */
3557 #define TCM_REG_CSEM_WEIGHT                                      0x500bc
3558 /* [RW 8] The Event ID in case of ErrorFlg is set in the input message. */
3559 #define TCM_REG_ERR_EVNT_ID                                      0x500a0
3560 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
3561 #define TCM_REG_ERR_TCM_HDR                                      0x5009c
3562 /* [RW 8] The Event ID for Timers expiration. */
3563 #define TCM_REG_EXPR_EVNT_ID                                     0x500a4
3564 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
3565    writes the initial credit value; read returns the current value of the
3566    credit counter. Must be initialized to 64 at start-up. */
3567 #define TCM_REG_FIC0_INIT_CRD                                    0x5020c
3568 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
3569    writes the initial credit value; read returns the current value of the
3570    credit counter. Must be initialized to 64 at start-up. */
3571 #define TCM_REG_FIC1_INIT_CRD                                    0x50210
3572 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
3573    - strict priority defined by ~tcm_registers_gr_ag_pr.gr_ag_pr;
3574    ~tcm_registers_gr_ld0_pr.gr_ld0_pr and
3575    ~tcm_registers_gr_ld1_pr.gr_ld1_pr. */
3576 #define TCM_REG_GR_ARB_TYPE                                      0x50114
3577 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
3578    highest priority is 3. It is supposed that the Store channel is the
3579    compliment of the other 3 groups. */
3580 #define TCM_REG_GR_LD0_PR                                        0x5011c
3581 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
3582    highest priority is 3. It is supposed that the Store channel is the
3583    compliment of the other 3 groups. */
3584 #define TCM_REG_GR_LD1_PR                                        0x50120
3585 /* [RW 4] The number of double REG-pairs; loaded from the STORM context and
3586    sent to STORM; for a specific connection type. The double REG-pairs are
3587    used to align to STORM context row size of 128 bits. The offset of these
3588    data in the STORM context is always 0. Index _i stands for the connection
3589    type (one of 16). */
3590 #define TCM_REG_N_SM_CTX_LD_0                                    0x50050
3591 #define TCM_REG_N_SM_CTX_LD_1                                    0x50054
3592 #define TCM_REG_N_SM_CTX_LD_2                                    0x50058
3593 #define TCM_REG_N_SM_CTX_LD_3                                    0x5005c
3594 #define TCM_REG_N_SM_CTX_LD_4                                    0x50060
3595 #define TCM_REG_N_SM_CTX_LD_5                                    0x50064
3596 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
3597    acknowledge output is deasserted; all other signals are treated as usual;
3598    if 1 - normal activity. */
3599 #define TCM_REG_PBF_IFEN                                         0x50024
3600 /* [RC 1] Message length mismatch (relative to last indication) at the In#7
3601    interface. */
3602 #define TCM_REG_PBF_LENGTH_MIS                                   0x5016c
3603 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
3604    weight 8 (the most prioritised); 1 stands for weight 1(least
3605    prioritised); 2 stands for weight 2; tc. */
3606 #define TCM_REG_PBF_WEIGHT                                       0x500b4
3607 #define TCM_REG_PHYS_QNUM0_0                                     0x500e0
3608 #define TCM_REG_PHYS_QNUM0_1                                     0x500e4
3609 #define TCM_REG_PHYS_QNUM1_0                                     0x500e8
3610 #define TCM_REG_PHYS_QNUM1_1                                     0x500ec
3611 #define TCM_REG_PHYS_QNUM2_0                                     0x500f0
3612 #define TCM_REG_PHYS_QNUM2_1                                     0x500f4
3613 #define TCM_REG_PHYS_QNUM3_0                                     0x500f8
3614 #define TCM_REG_PHYS_QNUM3_1                                     0x500fc
3615 /* [RW 1] Input prs Interface enable. If 0 - the valid input is disregarded;
3616    acknowledge output is deasserted; all other signals are treated as usual;
3617    if 1 - normal activity. */
3618 #define TCM_REG_PRS_IFEN                                         0x50020
3619 /* [RC 1] Message length mismatch (relative to last indication) at the In#6
3620    interface. */
3621 #define TCM_REG_PRS_LENGTH_MIS                                   0x50168
3622 /* [RW 3] The weight of the input prs in the WRR mechanism. 0 stands for
3623    weight 8 (the most prioritised); 1 stands for weight 1(least
3624    prioritised); 2 stands for weight 2; tc. */
3625 #define TCM_REG_PRS_WEIGHT                                       0x500b0
3626 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
3627 #define TCM_REG_STOP_EVNT_ID                                     0x500a8
3628 /* [RC 1] Message length mismatch (relative to last indication) at the STORM
3629    interface. */
3630 #define TCM_REG_STORM_LENGTH_MIS                                 0x50160
3631 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
3632    disregarded; acknowledge output is deasserted; all other signals are
3633    treated as usual; if 1 - normal activity. */
3634 #define TCM_REG_STORM_TCM_IFEN                                   0x50010
3635 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
3636    weight 8 (the most prioritised); 1 stands for weight 1(least
3637    prioritised); 2 stands for weight 2; tc. */
3638 #define TCM_REG_STORM_WEIGHT                                     0x500ac
3639 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
3640    acknowledge output is deasserted; all other signals are treated as usual;
3641    if 1 - normal activity. */
3642 #define TCM_REG_TCM_CFC_IFEN                                     0x50040
3643 /* [RW 11] Interrupt mask register #0 read/write */
3644 #define TCM_REG_TCM_INT_MASK                                     0x501dc
3645 /* [R 11] Interrupt register #0 read */
3646 #define TCM_REG_TCM_INT_STS                                      0x501d0
3647 /* [RW 27] Parity mask register #0 read/write */
3648 #define TCM_REG_TCM_PRTY_MASK                                    0x501ec
3649 /* [R 27] Parity register #0 read */
3650 #define TCM_REG_TCM_PRTY_STS                                     0x501e0
3651 /* [RC 27] Parity register #0 read clear */
3652 #define TCM_REG_TCM_PRTY_STS_CLR                                 0x501e4
3653 /* [RW 3] The size of AG context region 0 in REG-pairs. Designates the MS
3654    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
3655    Is used to determine the number of the AG context REG-pairs written back;
3656    when the input message Reg1WbFlg isn't set. */
3657 #define TCM_REG_TCM_REG0_SZ                                      0x500d8
3658 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
3659    disregarded; valid is deasserted; all other signals are treated as usual;
3660    if 1 - normal activity. */
3661 #define TCM_REG_TCM_STORM0_IFEN                                  0x50004
3662 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
3663    disregarded; valid is deasserted; all other signals are treated as usual;
3664    if 1 - normal activity. */
3665 #define TCM_REG_TCM_STORM1_IFEN                                  0x50008
3666 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
3667    disregarded; valid is deasserted; all other signals are treated as usual;
3668    if 1 - normal activity. */
3669 #define TCM_REG_TCM_TQM_IFEN                                     0x5000c
3670 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
3671 #define TCM_REG_TCM_TQM_USE_Q                                    0x500d4
3672 /* [RW 28] The CM header for Timers expiration command. */
3673 #define TCM_REG_TM_TCM_HDR                                       0x50098
3674 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
3675    disregarded; acknowledge output is deasserted; all other signals are
3676    treated as usual; if 1 - normal activity. */
3677 #define TCM_REG_TM_TCM_IFEN                                      0x5001c
3678 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
3679    weight 8 (the most prioritised); 1 stands for weight 1(least
3680    prioritised); 2 stands for weight 2; tc. */
3681 #define TCM_REG_TM_WEIGHT                                        0x500d0
3682 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
3683    the initial credit value; read returns the current value of the credit
3684    counter. Must be initialized to 32 at start-up. */
3685 #define TCM_REG_TQM_INIT_CRD                                     0x5021c
3686 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
3687    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3688    prioritised); 2 stands for weight 2; tc. */
3689 #define TCM_REG_TQM_P_WEIGHT                                     0x500c8
3690 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
3691    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
3692    prioritised); 2 stands for weight 2; tc. */
3693 #define TCM_REG_TQM_S_WEIGHT                                     0x500cc
3694 /* [RW 28] The CM header value for QM request (primary). */
3695 #define TCM_REG_TQM_TCM_HDR_P                                    0x50090
3696 /* [RW 28] The CM header value for QM request (secondary). */
3697 #define TCM_REG_TQM_TCM_HDR_S                                    0x50094
3698 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
3699    acknowledge output is deasserted; all other signals are treated as usual;
3700    if 1 - normal activity. */
3701 #define TCM_REG_TQM_TCM_IFEN                                     0x50014
3702 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
3703    acknowledge output is deasserted; all other signals are treated as usual;
3704    if 1 - normal activity. */
3705 #define TCM_REG_TSDM_IFEN                                        0x50018
3706 /* [RC 1] Message length mismatch (relative to last indication) at the SDM
3707    interface. */
3708 #define TCM_REG_TSDM_LENGTH_MIS                                  0x50164
3709 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
3710    weight 8 (the most prioritised); 1 stands for weight 1(least
3711    prioritised); 2 stands for weight 2; tc. */
3712 #define TCM_REG_TSDM_WEIGHT                                      0x500c4
3713 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
3714    disregarded; acknowledge output is deasserted; all other signals are
3715    treated as usual; if 1 - normal activity. */
3716 #define TCM_REG_USEM_IFEN                                        0x50028
3717 /* [RC 1] Message length mismatch (relative to last indication) at the In#8
3718    interface. */
3719 #define TCM_REG_USEM_LENGTH_MIS                                  0x50170
3720 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
3721    weight 8 (the most prioritised); 1 stands for weight 1(least
3722    prioritised); 2 stands for weight 2; tc. */
3723 #define TCM_REG_USEM_WEIGHT                                      0x500b8
3724 /* [RW 21] Indirect access to the descriptor table of the XX protection
3725    mechanism. The fields are: [5:0] - length of the message; 15:6] - message
3726    pointer; 20:16] - next pointer. */
3727 #define TCM_REG_XX_DESCR_TABLE                                   0x50280
3728 #define TCM_REG_XX_DESCR_TABLE_SIZE                              32
3729 /* [R 6] Use to read the value of XX protection Free counter. */
3730 #define TCM_REG_XX_FREE                                          0x50178
3731 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
3732    of the Input Stage XX protection buffer by the XX protection pending
3733    messages. Max credit available - 127.Write writes the initial credit
3734    value; read returns the current value of the credit counter. Must be
3735    initialized to 19 at start-up. */
3736 #define TCM_REG_XX_INIT_CRD                                      0x50220
3737 /* [RW 6] Maximum link list size (messages locked) per connection in the XX
3738    protection. */
3739 #define TCM_REG_XX_MAX_LL_SZ                                     0x50044
3740 /* [RW 6] The maximum number of pending messages; which may be stored in XX
3741    protection. ~tcm_registers_xx_free.xx_free is read on read. */
3742 #define TCM_REG_XX_MSG_NUM                                       0x50224
3743 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
3744 #define TCM_REG_XX_OVFL_EVNT_ID                                  0x50048
3745 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
3746    The fields are:[4:0] - tail pointer; [10:5] - Link List size; 15:11] -
3747    header pointer. */
3748 #define TCM_REG_XX_TABLE                                         0x50240
3749 /* [RW 4] Load value for cfc ac credit cnt. */
3750 #define TM_REG_CFC_AC_CRDCNT_VAL                                 0x164208
3751 /* [RW 4] Load value for cfc cld credit cnt. */
3752 #define TM_REG_CFC_CLD_CRDCNT_VAL                                0x164210
3753 /* [RW 8] Client0 context region. */
3754 #define TM_REG_CL0_CONT_REGION                                   0x164030
3755 /* [RW 8] Client1 context region. */
3756 #define TM_REG_CL1_CONT_REGION                                   0x164034
3757 /* [RW 8] Client2 context region. */
3758 #define TM_REG_CL2_CONT_REGION                                   0x164038
3759 /* [RW 2] Client in High priority client number. */
3760 #define TM_REG_CLIN_PRIOR0_CLIENT                                0x164024
3761 /* [RW 4] Load value for clout0 cred cnt. */
3762 #define TM_REG_CLOUT_CRDCNT0_VAL                                 0x164220
3763 /* [RW 4] Load value for clout1 cred cnt. */
3764 #define TM_REG_CLOUT_CRDCNT1_VAL                                 0x164228
3765 /* [RW 4] Load value for clout2 cred cnt. */
3766 #define TM_REG_CLOUT_CRDCNT2_VAL                                 0x164230
3767 /* [RW 1] Enable client0 input. */
3768 #define TM_REG_EN_CL0_INPUT                                      0x164008
3769 /* [RW 1] Enable client1 input. */
3770 #define TM_REG_EN_CL1_INPUT                                      0x16400c
3771 /* [RW 1] Enable client2 input. */
3772 #define TM_REG_EN_CL2_INPUT                                      0x164010
3773 #define TM_REG_EN_LINEAR0_TIMER                                  0x164014
3774 /* [RW 1] Enable real time counter. */
3775 #define TM_REG_EN_REAL_TIME_CNT                                  0x1640d8
3776 /* [RW 1] Enable for Timers state machines. */
3777 #define TM_REG_EN_TIMERS                                         0x164000
3778 /* [RW 4] Load value for expiration credit cnt. CFC max number of
3779    outstanding load requests for timers (expiration) context loading. */
3780 #define TM_REG_EXP_CRDCNT_VAL                                    0x164238
3781 /* [RW 32] Linear0 logic address. */
3782 #define TM_REG_LIN0_LOGIC_ADDR                                   0x164240
3783 /* [RW 18] Linear0 Max active cid (in banks of 32 entries). */
3784 #define TM_REG_LIN0_MAX_ACTIVE_CID                               0x164048
3785 /* [WB 64] Linear0 phy address. */
3786 #define TM_REG_LIN0_PHY_ADDR                                     0x164270
3787 /* [RW 1] Linear0 physical address valid. */
3788 #define TM_REG_LIN0_PHY_ADDR_VALID                               0x164248
3789 #define TM_REG_LIN0_SCAN_ON                                      0x1640d0
3790 /* [RW 24] Linear0 array scan timeout. */
3791 #define TM_REG_LIN0_SCAN_TIME                                    0x16403c
3792 /* [RW 32] Linear1 logic address. */
3793 #define TM_REG_LIN1_LOGIC_ADDR                                   0x164250
3794 /* [WB 64] Linear1 phy address. */
3795 #define TM_REG_LIN1_PHY_ADDR                                     0x164280
3796 /* [RW 1] Linear1 physical address valid. */
3797 #define TM_REG_LIN1_PHY_ADDR_VALID                               0x164258
3798 /* [RW 6] Linear timer set_clear fifo threshold. */
3799 #define TM_REG_LIN_SETCLR_FIFO_ALFULL_THR                        0x164070
3800 /* [RW 2] Load value for pci arbiter credit cnt. */
3801 #define TM_REG_PCIARB_CRDCNT_VAL                                 0x164260
3802 /* [RW 20] The amount of hardware cycles for each timer tick. */
3803 #define TM_REG_TIMER_TICK_SIZE                                   0x16401c
3804 /* [RW 8] Timers Context region. */
3805 #define TM_REG_TM_CONTEXT_REGION                                 0x164044
3806 /* [RW 1] Interrupt mask register #0 read/write */
3807 #define TM_REG_TM_INT_MASK                                       0x1640fc
3808 /* [R 1] Interrupt register #0 read */
3809 #define TM_REG_TM_INT_STS                                        0x1640f0
3810 /* [RW 7] Parity mask register #0 read/write */
3811 #define TM_REG_TM_PRTY_MASK                                      0x16410c
3812 /* [RC 7] Parity register #0 read clear */
3813 #define TM_REG_TM_PRTY_STS_CLR                                   0x164104
3814 /* [RW 8] The event id for aggregated interrupt 0 */
3815 #define TSDM_REG_AGG_INT_EVENT_0                                 0x42038
3816 #define TSDM_REG_AGG_INT_EVENT_1                                 0x4203c
3817 #define TSDM_REG_AGG_INT_EVENT_2                                 0x42040
3818 #define TSDM_REG_AGG_INT_EVENT_3                                 0x42044
3819 #define TSDM_REG_AGG_INT_EVENT_4                                 0x42048
3820 /* [RW 1] The T bit for aggregated interrupt 0 */
3821 #define TSDM_REG_AGG_INT_T_0                                     0x420b8
3822 #define TSDM_REG_AGG_INT_T_1                                     0x420bc
3823 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
3824 #define TSDM_REG_CFC_RSP_START_ADDR                              0x42008
3825 /* [RW 16] The maximum value of the completion counter #0 */
3826 #define TSDM_REG_CMP_COUNTER_MAX0                                0x4201c
3827 /* [RW 16] The maximum value of the completion counter #1 */
3828 #define TSDM_REG_CMP_COUNTER_MAX1                                0x42020
3829 /* [RW 16] The maximum value of the completion counter #2 */
3830 #define TSDM_REG_CMP_COUNTER_MAX2                                0x42024
3831 /* [RW 16] The maximum value of the completion counter #3 */
3832 #define TSDM_REG_CMP_COUNTER_MAX3                                0x42028
3833 /* [RW 13] The start address in the internal RAM for the completion
3834    counters. */
3835 #define TSDM_REG_CMP_COUNTER_START_ADDR                          0x4200c
3836 #define TSDM_REG_ENABLE_IN1                                      0x42238
3837 #define TSDM_REG_ENABLE_IN2                                      0x4223c
3838 #define TSDM_REG_ENABLE_OUT1                                     0x42240
3839 #define TSDM_REG_ENABLE_OUT2                                     0x42244
3840 /* [RW 4] The initial number of messages that can be sent to the pxp control
3841    interface without receiving any ACK. */
3842 #define TSDM_REG_INIT_CREDIT_PXP_CTRL                            0x424bc
3843 /* [ST 32] The number of ACK after placement messages received */
3844 #define TSDM_REG_NUM_OF_ACK_AFTER_PLACE                          0x4227c
3845 /* [ST 32] The number of packet end messages received from the parser */
3846 #define TSDM_REG_NUM_OF_PKT_END_MSG                              0x42274
3847 /* [ST 32] The number of requests received from the pxp async if */
3848 #define TSDM_REG_NUM_OF_PXP_ASYNC_REQ                            0x42278
3849 /* [ST 32] The number of commands received in queue 0 */
3850 #define TSDM_REG_NUM_OF_Q0_CMD                                   0x42248
3851 /* [ST 32] The number of commands received in queue 10 */
3852 #define TSDM_REG_NUM_OF_Q10_CMD                                  0x4226c
3853 /* [ST 32] The number of commands received in queue 11 */
3854 #define TSDM_REG_NUM_OF_Q11_CMD                                  0x42270
3855 /* [ST 32] The number of commands received in queue 1 */
3856 #define TSDM_REG_NUM_OF_Q1_CMD                                   0x4224c
3857 /* [ST 32] The number of commands received in queue 3 */
3858 #define TSDM_REG_NUM_OF_Q3_CMD                                   0x42250
3859 /* [ST 32] The number of commands received in queue 4 */
3860 #define TSDM_REG_NUM_OF_Q4_CMD                                   0x42254
3861 /* [ST 32] The number of commands received in queue 5 */
3862 #define TSDM_REG_NUM_OF_Q5_CMD                                   0x42258
3863 /* [ST 32] The number of commands received in queue 6 */
3864 #define TSDM_REG_NUM_OF_Q6_CMD                                   0x4225c
3865 /* [ST 32] The number of commands received in queue 7 */
3866 #define TSDM_REG_NUM_OF_Q7_CMD                                   0x42260
3867 /* [ST 32] The number of commands received in queue 8 */
3868 #define TSDM_REG_NUM_OF_Q8_CMD                                   0x42264
3869 /* [ST 32] The number of commands received in queue 9 */
3870 #define TSDM_REG_NUM_OF_Q9_CMD                                   0x42268
3871 /* [RW 13] The start address in the internal RAM for the packet end message */
3872 #define TSDM_REG_PCK_END_MSG_START_ADDR                          0x42014
3873 /* [RW 13] The start address in the internal RAM for queue counters */
3874 #define TSDM_REG_Q_COUNTER_START_ADDR                            0x42010
3875 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
3876 #define TSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0x42548
3877 /* [R 1] parser fifo empty in sdm_sync block */
3878 #define TSDM_REG_SYNC_PARSER_EMPTY                               0x42550
3879 /* [R 1] parser serial fifo empty in sdm_sync block */
3880 #define TSDM_REG_SYNC_SYNC_EMPTY                                 0x42558
3881 /* [RW 32] Tick for timer counter. Applicable only when
3882    ~tsdm_registers_timer_tick_enable.timer_tick_enable =1 */
3883 #define TSDM_REG_TIMER_TICK                                      0x42000
3884 /* [RW 32] Interrupt mask register #0 read/write */
3885 #define TSDM_REG_TSDM_INT_MASK_0                                 0x4229c
3886 #define TSDM_REG_TSDM_INT_MASK_1                                 0x422ac
3887 /* [R 32] Interrupt register #0 read */
3888 #define TSDM_REG_TSDM_INT_STS_0                                  0x42290
3889 #define TSDM_REG_TSDM_INT_STS_1                                  0x422a0
3890 /* [RW 11] Parity mask register #0 read/write */
3891 #define TSDM_REG_TSDM_PRTY_MASK                                  0x422bc
3892 /* [R 11] Parity register #0 read */
3893 #define TSDM_REG_TSDM_PRTY_STS                                   0x422b0
3894 /* [RC 11] Parity register #0 read clear */
3895 #define TSDM_REG_TSDM_PRTY_STS_CLR                               0x422b4
3896 /* [RW 5] The number of time_slots in the arbitration cycle */
3897 #define TSEM_REG_ARB_CYCLE_SIZE                                  0x180034
3898 /* [RW 3] The source that is associated with arbitration element 0. Source
3899    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3900    sleeping thread with priority 1; 4- sleeping thread with priority 2 */
3901 #define TSEM_REG_ARB_ELEMENT0                                    0x180020
3902 /* [RW 3] The source that is associated with arbitration element 1. Source
3903    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3904    sleeping thread with priority 1; 4- sleeping thread with priority 2.
3905    Could not be equal to register ~tsem_registers_arb_element0.arb_element0 */
3906 #define TSEM_REG_ARB_ELEMENT1                                    0x180024
3907 /* [RW 3] The source that is associated with arbitration element 2. Source
3908    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3909    sleeping thread with priority 1; 4- sleeping thread with priority 2.
3910    Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3911    and ~tsem_registers_arb_element1.arb_element1 */
3912 #define TSEM_REG_ARB_ELEMENT2                                    0x180028
3913 /* [RW 3] The source that is associated with arbitration element 3. Source
3914    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3915    sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
3916    not be equal to register ~tsem_registers_arb_element0.arb_element0 and
3917    ~tsem_registers_arb_element1.arb_element1 and
3918    ~tsem_registers_arb_element2.arb_element2 */
3919 #define TSEM_REG_ARB_ELEMENT3                                    0x18002c
3920 /* [RW 3] The source that is associated with arbitration element 4. Source
3921    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
3922    sleeping thread with priority 1; 4- sleeping thread with priority 2.
3923    Could not be equal to register ~tsem_registers_arb_element0.arb_element0
3924    and ~tsem_registers_arb_element1.arb_element1 and
3925    ~tsem_registers_arb_element2.arb_element2 and
3926    ~tsem_registers_arb_element3.arb_element3 */
3927 #define TSEM_REG_ARB_ELEMENT4                                    0x180030
3928 #define TSEM_REG_ENABLE_IN                                       0x1800a4
3929 #define TSEM_REG_ENABLE_OUT                                      0x1800a8
3930 /* [RW 32] This address space contains all registers and memories that are
3931    placed in SEM_FAST block. The SEM_FAST registers are described in
3932    appendix B. In order to access the sem_fast registers the base address
3933    ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
3934 #define TSEM_REG_FAST_MEMORY                                     0x1a0000
3935 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
3936    by the microcode */
3937 #define TSEM_REG_FIC0_DISABLE                                    0x180224
3938 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
3939    by the microcode */
3940 #define TSEM_REG_FIC1_DISABLE                                    0x180234
3941 /* [RW 15] Interrupt table Read and write access to it is not possible in
3942    the middle of the work */
3943 #define TSEM_REG_INT_TABLE                                       0x180400
3944 /* [ST 24] Statistics register. The number of messages that entered through
3945    FIC0 */
3946 #define TSEM_REG_MSG_NUM_FIC0                                    0x180000
3947 /* [ST 24] Statistics register. The number of messages that entered through
3948    FIC1 */
3949 #define TSEM_REG_MSG_NUM_FIC1                                    0x180004
3950 /* [ST 24] Statistics register. The number of messages that were sent to
3951    FOC0 */
3952 #define TSEM_REG_MSG_NUM_FOC0                                    0x180008
3953 /* [ST 24] Statistics register. The number of messages that were sent to
3954    FOC1 */
3955 #define TSEM_REG_MSG_NUM_FOC1                                    0x18000c
3956 /* [ST 24] Statistics register. The number of messages that were sent to
3957    FOC2 */
3958 #define TSEM_REG_MSG_NUM_FOC2                                    0x180010
3959 /* [ST 24] Statistics register. The number of messages that were sent to
3960    FOC3 */
3961 #define TSEM_REG_MSG_NUM_FOC3                                    0x180014
3962 /* [RW 1] Disables input messages from the passive buffer May be updated
3963    during run_time by the microcode */
3964 #define TSEM_REG_PAS_DISABLE                                     0x18024c
3965 /* [WB 128] Debug only. Passive buffer memory */
3966 #define TSEM_REG_PASSIVE_BUFFER                                  0x181000
3967 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
3968 #define TSEM_REG_PRAM                                            0x1c0000
3969 /* [R 8] Valid sleeping threads indication have bit per thread */
3970 #define TSEM_REG_SLEEP_THREADS_VALID                             0x18026c
3971 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
3972 #define TSEM_REG_SLOW_EXT_STORE_EMPTY                            0x1802a0
3973 /* [RW 8] List of free threads . There is a bit per thread. */
3974 #define TSEM_REG_THREADS_LIST                                    0x1802e4
3975 /* [RC 32] Parity register #0 read clear */
3976 #define TSEM_REG_TSEM_PRTY_STS_CLR_0                             0x180118
3977 #define TSEM_REG_TSEM_PRTY_STS_CLR_1                             0x180128
3978 /* [RW 3] The arbitration scheme of time_slot 0 */
3979 #define TSEM_REG_TS_0_AS                                         0x180038
3980 /* [RW 3] The arbitration scheme of time_slot 10 */
3981 #define TSEM_REG_TS_10_AS                                        0x180060
3982 /* [RW 3] The arbitration scheme of time_slot 11 */
3983 #define TSEM_REG_TS_11_AS                                        0x180064
3984 /* [RW 3] The arbitration scheme of time_slot 12 */
3985 #define TSEM_REG_TS_12_AS                                        0x180068
3986 /* [RW 3] The arbitration scheme of time_slot 13 */
3987 #define TSEM_REG_TS_13_AS                                        0x18006c
3988 /* [RW 3] The arbitration scheme of time_slot 14 */
3989 #define TSEM_REG_TS_14_AS                                        0x180070
3990 /* [RW 3] The arbitration scheme of time_slot 15 */
3991 #define TSEM_REG_TS_15_AS                                        0x180074
3992 /* [RW 3] The arbitration scheme of time_slot 16 */
3993 #define TSEM_REG_TS_16_AS                                        0x180078
3994 /* [RW 3] The arbitration scheme of time_slot 17 */
3995 #define TSEM_REG_TS_17_AS                                        0x18007c
3996 /* [RW 3] The arbitration scheme of time_slot 18 */
3997 #define TSEM_REG_TS_18_AS                                        0x180080
3998 /* [RW 3] The arbitration scheme of time_slot 1 */
3999 #define TSEM_REG_TS_1_AS                                         0x18003c
4000 /* [RW 3] The arbitration scheme of time_slot 2 */
4001 #define TSEM_REG_TS_2_AS                                         0x180040
4002 /* [RW 3] The arbitration scheme of time_slot 3 */
4003 #define TSEM_REG_TS_3_AS                                         0x180044
4004 /* [RW 3] The arbitration scheme of time_slot 4 */
4005 #define TSEM_REG_TS_4_AS                                         0x180048
4006 /* [RW 3] The arbitration scheme of time_slot 5 */
4007 #define TSEM_REG_TS_5_AS                                         0x18004c
4008 /* [RW 3] The arbitration scheme of time_slot 6 */
4009 #define TSEM_REG_TS_6_AS                                         0x180050
4010 /* [RW 3] The arbitration scheme of time_slot 7 */
4011 #define TSEM_REG_TS_7_AS                                         0x180054
4012 /* [RW 3] The arbitration scheme of time_slot 8 */
4013 #define TSEM_REG_TS_8_AS                                         0x180058
4014 /* [RW 3] The arbitration scheme of time_slot 9 */
4015 #define TSEM_REG_TS_9_AS                                         0x18005c
4016 /* [RW 32] Interrupt mask register #0 read/write */
4017 #define TSEM_REG_TSEM_INT_MASK_0                                 0x180100
4018 #define TSEM_REG_TSEM_INT_MASK_1                                 0x180110
4019 /* [R 32] Interrupt register #0 read */
4020 #define TSEM_REG_TSEM_INT_STS_0                                  0x1800f4
4021 #define TSEM_REG_TSEM_INT_STS_1                                  0x180104
4022 /* [RW 32] Parity mask register #0 read/write */
4023 #define TSEM_REG_TSEM_PRTY_MASK_0                                0x180120
4024 #define TSEM_REG_TSEM_PRTY_MASK_1                                0x180130
4025 /* [R 32] Parity register #0 read */
4026 #define TSEM_REG_TSEM_PRTY_STS_0                                 0x180114
4027 #define TSEM_REG_TSEM_PRTY_STS_1                                 0x180124
4028 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
4029  * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
4030 #define TSEM_REG_VFPF_ERR_NUM                                    0x180380
4031 /* [RW 32] Indirect access to AG context with 32-bits granularity. The bits
4032  * [10:8] of the address should be the offset within the accessed LCID
4033  * context; the bits [7:0] are the accessed LCID.Example: to write to REG10
4034  * LCID100. The RBC address should be 12'ha64. */
4035 #define UCM_REG_AG_CTX                                           0xe2000
4036 /* [R 5] Used to read the XX protection CAM occupancy counter. */
4037 #define UCM_REG_CAM_OCCUP                                        0xe0170
4038 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
4039    disregarded; valid output is deasserted; all other signals are treated as
4040    usual; if 1 - normal activity. */
4041 #define UCM_REG_CDU_AG_RD_IFEN                                   0xe0038
4042 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
4043    are disregarded; all other signals are treated as usual; if 1 - normal
4044    activity. */
4045 #define UCM_REG_CDU_AG_WR_IFEN                                   0xe0034
4046 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
4047    disregarded; valid output is deasserted; all other signals are treated as
4048    usual; if 1 - normal activity. */
4049 #define UCM_REG_CDU_SM_RD_IFEN                                   0xe0040
4050 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
4051    input is disregarded; all other signals are treated as usual; if 1 -
4052    normal activity. */
4053 #define UCM_REG_CDU_SM_WR_IFEN                                   0xe003c
4054 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4055    the initial credit value; read returns the current value of the credit
4056    counter. Must be initialized to 1 at start-up. */
4057 #define UCM_REG_CFC_INIT_CRD                                     0xe0204
4058 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
4059    weight 8 (the most prioritised); 1 stands for weight 1(least
4060    prioritised); 2 stands for weight 2; tc. */
4061 #define UCM_REG_CP_WEIGHT                                        0xe00c4
4062 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
4063    disregarded; acknowledge output is deasserted; all other signals are
4064    treated as usual; if 1 - normal activity. */
4065 #define UCM_REG_CSEM_IFEN                                        0xe0028
4066 /* [RC 1] Set when the message length mismatch (relative to last indication)
4067    at the csem interface is detected. */
4068 #define UCM_REG_CSEM_LENGTH_MIS                                  0xe0160
4069 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
4070    weight 8 (the most prioritised); 1 stands for weight 1(least
4071    prioritised); 2 stands for weight 2; tc. */
4072 #define UCM_REG_CSEM_WEIGHT                                      0xe00b8
4073 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
4074    disregarded; acknowledge output is deasserted; all other signals are
4075    treated as usual; if 1 - normal activity. */
4076 #define UCM_REG_DORQ_IFEN                                        0xe0030
4077 /* [RC 1] Set when the message length mismatch (relative to last indication)
4078    at the dorq interface is detected. */
4079 #define UCM_REG_DORQ_LENGTH_MIS                                  0xe0168
4080 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
4081    weight 8 (the most prioritised); 1 stands for weight 1(least
4082    prioritised); 2 stands for weight 2; tc. */
4083 #define UCM_REG_DORQ_WEIGHT                                      0xe00c0
4084 /* [RW 8] The Event ID in case ErrorFlg input message bit is set. */
4085 #define UCM_REG_ERR_EVNT_ID                                      0xe00a4
4086 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
4087 #define UCM_REG_ERR_UCM_HDR                                      0xe00a0
4088 /* [RW 8] The Event ID for Timers expiration. */
4089 #define UCM_REG_EXPR_EVNT_ID                                     0xe00a8
4090 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
4091    writes the initial credit value; read returns the current value of the
4092    credit counter. Must be initialized to 64 at start-up. */
4093 #define UCM_REG_FIC0_INIT_CRD                                    0xe020c
4094 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
4095    writes the initial credit value; read returns the current value of the
4096    credit counter. Must be initialized to 64 at start-up. */
4097 #define UCM_REG_FIC1_INIT_CRD                                    0xe0210
4098 /* [RW 1] Arbitration between Input Arbiter groups: 0 - fair Round-Robin; 1
4099    - strict priority defined by ~ucm_registers_gr_ag_pr.gr_ag_pr;
4100    ~ucm_registers_gr_ld0_pr.gr_ld0_pr and
4101    ~ucm_registers_gr_ld1_pr.gr_ld1_pr. */
4102 #define UCM_REG_GR_ARB_TYPE                                      0xe0144
4103 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
4104    highest priority is 3. It is supposed that the Store channel group is
4105    compliment to the others. */
4106 #define UCM_REG_GR_LD0_PR                                        0xe014c
4107 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
4108    highest priority is 3. It is supposed that the Store channel group is
4109    compliment to the others. */
4110 #define UCM_REG_GR_LD1_PR                                        0xe0150
4111 /* [RW 2] The queue index for invalidate counter flag decision. */
4112 #define UCM_REG_INV_CFLG_Q                                       0xe00e4
4113 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
4114    sent to STORM; for a specific connection type. the double REG-pairs are
4115    used in order to align to STORM context row size of 128 bits. The offset
4116    of these data in the STORM context is always 0. Index _i stands for the
4117    connection type (one of 16). */
4118 #define UCM_REG_N_SM_CTX_LD_0                                    0xe0054
4119 #define UCM_REG_N_SM_CTX_LD_1                                    0xe0058
4120 #define UCM_REG_N_SM_CTX_LD_2                                    0xe005c
4121 #define UCM_REG_N_SM_CTX_LD_3                                    0xe0060
4122 #define UCM_REG_N_SM_CTX_LD_4                                    0xe0064
4123 #define UCM_REG_N_SM_CTX_LD_5                                    0xe0068
4124 #define UCM_REG_PHYS_QNUM0_0                                     0xe0110
4125 #define UCM_REG_PHYS_QNUM0_1                                     0xe0114
4126 #define UCM_REG_PHYS_QNUM1_0                                     0xe0118
4127 #define UCM_REG_PHYS_QNUM1_1                                     0xe011c
4128 #define UCM_REG_PHYS_QNUM2_0                                     0xe0120
4129 #define UCM_REG_PHYS_QNUM2_1                                     0xe0124
4130 #define UCM_REG_PHYS_QNUM3_0                                     0xe0128
4131 #define UCM_REG_PHYS_QNUM3_1                                     0xe012c
4132 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
4133 #define UCM_REG_STOP_EVNT_ID                                     0xe00ac
4134 /* [RC 1] Set when the message length mismatch (relative to last indication)
4135    at the STORM interface is detected. */
4136 #define UCM_REG_STORM_LENGTH_MIS                                 0xe0154
4137 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
4138    disregarded; acknowledge output is deasserted; all other signals are
4139    treated as usual; if 1 - normal activity. */
4140 #define UCM_REG_STORM_UCM_IFEN                                   0xe0010
4141 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
4142    weight 8 (the most prioritised); 1 stands for weight 1(least
4143    prioritised); 2 stands for weight 2; tc. */
4144 #define UCM_REG_STORM_WEIGHT                                     0xe00b0
4145 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
4146    writes the initial credit value; read returns the current value of the
4147    credit counter. Must be initialized to 4 at start-up. */
4148 #define UCM_REG_TM_INIT_CRD                                      0xe021c
4149 /* [RW 28] The CM header for Timers expiration command. */
4150 #define UCM_REG_TM_UCM_HDR                                       0xe009c
4151 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
4152    disregarded; acknowledge output is deasserted; all other signals are
4153    treated as usual; if 1 - normal activity. */
4154 #define UCM_REG_TM_UCM_IFEN                                      0xe001c
4155 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
4156    weight 8 (the most prioritised); 1 stands for weight 1(least
4157    prioritised); 2 stands for weight 2; tc. */
4158 #define UCM_REG_TM_WEIGHT                                        0xe00d4
4159 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
4160    disregarded; acknowledge output is deasserted; all other signals are
4161    treated as usual; if 1 - normal activity. */
4162 #define UCM_REG_TSEM_IFEN                                        0xe0024
4163 /* [RC 1] Set when the message length mismatch (relative to last indication)
4164    at the tsem interface is detected. */
4165 #define UCM_REG_TSEM_LENGTH_MIS                                  0xe015c
4166 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
4167    weight 8 (the most prioritised); 1 stands for weight 1(least
4168    prioritised); 2 stands for weight 2; tc. */
4169 #define UCM_REG_TSEM_WEIGHT                                      0xe00b4
4170 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4171    acknowledge output is deasserted; all other signals are treated as usual;
4172    if 1 - normal activity. */
4173 #define UCM_REG_UCM_CFC_IFEN                                     0xe0044
4174 /* [RW 11] Interrupt mask register #0 read/write */
4175 #define UCM_REG_UCM_INT_MASK                                     0xe01d4
4176 /* [R 11] Interrupt register #0 read */
4177 #define UCM_REG_UCM_INT_STS                                      0xe01c8
4178 /* [R 27] Parity register #0 read */
4179 #define UCM_REG_UCM_PRTY_STS                                     0xe01d8
4180 /* [RC 27] Parity register #0 read clear */
4181 #define UCM_REG_UCM_PRTY_STS_CLR                                 0xe01dc
4182 /* [RW 2] The size of AG context region 0 in REG-pairs. Designates the MS
4183    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4184    Is used to determine the number of the AG context REG-pairs written back;
4185    when the Reg1WbFlg isn't set. */
4186 #define UCM_REG_UCM_REG0_SZ                                      0xe00dc
4187 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4188    disregarded; valid is deasserted; all other signals are treated as usual;
4189    if 1 - normal activity. */
4190 #define UCM_REG_UCM_STORM0_IFEN                                  0xe0004
4191 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4192    disregarded; valid is deasserted; all other signals are treated as usual;
4193    if 1 - normal activity. */
4194 #define UCM_REG_UCM_STORM1_IFEN                                  0xe0008
4195 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
4196    disregarded; acknowledge output is deasserted; all other signals are
4197    treated as usual; if 1 - normal activity. */
4198 #define UCM_REG_UCM_TM_IFEN                                      0xe0020
4199 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4200    disregarded; valid is deasserted; all other signals are treated as usual;
4201    if 1 - normal activity. */
4202 #define UCM_REG_UCM_UQM_IFEN                                     0xe000c
4203 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4204 #define UCM_REG_UCM_UQM_USE_Q                                    0xe00d8
4205 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4206    the initial credit value; read returns the current value of the credit
4207    counter. Must be initialized to 32 at start-up. */
4208 #define UCM_REG_UQM_INIT_CRD                                     0xe0220
4209 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4210    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4211    prioritised); 2 stands for weight 2; tc. */
4212 #define UCM_REG_UQM_P_WEIGHT                                     0xe00cc
4213 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
4214    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4215    prioritised); 2 stands for weight 2; tc. */
4216 #define UCM_REG_UQM_S_WEIGHT                                     0xe00d0
4217 /* [RW 28] The CM header value for QM request (primary). */
4218 #define UCM_REG_UQM_UCM_HDR_P                                    0xe0094
4219 /* [RW 28] The CM header value for QM request (secondary). */
4220 #define UCM_REG_UQM_UCM_HDR_S                                    0xe0098
4221 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4222    acknowledge output is deasserted; all other signals are treated as usual;
4223    if 1 - normal activity. */
4224 #define UCM_REG_UQM_UCM_IFEN                                     0xe0014
4225 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4226    acknowledge output is deasserted; all other signals are treated as usual;
4227    if 1 - normal activity. */
4228 #define UCM_REG_USDM_IFEN                                        0xe0018
4229 /* [RC 1] Set when the message length mismatch (relative to last indication)
4230    at the SDM interface is detected. */
4231 #define UCM_REG_USDM_LENGTH_MIS                                  0xe0158
4232 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
4233    weight 8 (the most prioritised); 1 stands for weight 1(least
4234    prioritised); 2 stands for weight 2; tc. */
4235 #define UCM_REG_USDM_WEIGHT                                      0xe00c8
4236 /* [RW 1] Input xsem Interface enable. If 0 - the valid input is
4237    disregarded; acknowledge output is deasserted; all other signals are
4238    treated as usual; if 1 - normal activity. */
4239 #define UCM_REG_XSEM_IFEN                                        0xe002c
4240 /* [RC 1] Set when the message length mismatch (relative to last indication)
4241    at the xsem interface isdetected. */
4242 #define UCM_REG_XSEM_LENGTH_MIS                                  0xe0164
4243 /* [RW 3] The weight of the input xsem in the WRR mechanism. 0 stands for
4244    weight 8 (the most prioritised); 1 stands for weight 1(least
4245    prioritised); 2 stands for weight 2; tc. */
4246 #define UCM_REG_XSEM_WEIGHT                                      0xe00bc
4247 /* [RW 20] Indirect access to the descriptor table of the XX protection
4248    mechanism. The fields are:[5:0] - message length; 14:6] - message
4249    pointer; 19:15] - next pointer. */
4250 #define UCM_REG_XX_DESCR_TABLE                                   0xe0280
4251 #define UCM_REG_XX_DESCR_TABLE_SIZE                              32
4252 /* [R 6] Use to read the XX protection Free counter. */
4253 #define UCM_REG_XX_FREE                                          0xe016c
4254 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4255    of the Input Stage XX protection buffer by the XX protection pending
4256    messages. Write writes the initial credit value; read returns the current
4257    value of the credit counter. Must be initialized to 12 at start-up. */
4258 #define UCM_REG_XX_INIT_CRD                                      0xe0224
4259 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4260    protection. ~ucm_registers_xx_free.xx_free read on read. */
4261 #define UCM_REG_XX_MSG_NUM                                       0xe0228
4262 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4263 #define UCM_REG_XX_OVFL_EVNT_ID                                  0xe004c
4264 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4265    The fields are: [4:0] - tail pointer; 10:5] - Link List size; 15:11] -
4266    header pointer. */
4267 #define UCM_REG_XX_TABLE                                         0xe0300
4268 /* [RW 8] The event id for aggregated interrupt 0 */
4269 #define USDM_REG_AGG_INT_EVENT_0                                 0xc4038
4270 #define USDM_REG_AGG_INT_EVENT_1                                 0xc403c
4271 #define USDM_REG_AGG_INT_EVENT_2                                 0xc4040
4272 #define USDM_REG_AGG_INT_EVENT_4                                 0xc4048
4273 #define USDM_REG_AGG_INT_EVENT_5                                 0xc404c
4274 #define USDM_REG_AGG_INT_EVENT_6                                 0xc4050
4275 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
4276    or auto-mask-mode (1) */
4277 #define USDM_REG_AGG_INT_MODE_0                                  0xc41b8
4278 #define USDM_REG_AGG_INT_MODE_1                                  0xc41bc
4279 #define USDM_REG_AGG_INT_MODE_4                                  0xc41c8
4280 #define USDM_REG_AGG_INT_MODE_5                                  0xc41cc
4281 #define USDM_REG_AGG_INT_MODE_6                                  0xc41d0
4282 /* [RW 1] The T bit for aggregated interrupt 5 */
4283 #define USDM_REG_AGG_INT_T_5                                     0xc40cc
4284 #define USDM_REG_AGG_INT_T_6                                     0xc40d0
4285 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4286 #define USDM_REG_CFC_RSP_START_ADDR                              0xc4008
4287 /* [RW 16] The maximum value of the completion counter #0 */
4288 #define USDM_REG_CMP_COUNTER_MAX0                                0xc401c
4289 /* [RW 16] The maximum value of the completion counter #1 */
4290 #define USDM_REG_CMP_COUNTER_MAX1                                0xc4020
4291 /* [RW 16] The maximum value of the completion counter #2 */
4292 #define USDM_REG_CMP_COUNTER_MAX2                                0xc4024
4293 /* [RW 16] The maximum value of the completion counter #3 */
4294 #define USDM_REG_CMP_COUNTER_MAX3                                0xc4028
4295 /* [RW 13] The start address in the internal RAM for the completion
4296    counters. */
4297 #define USDM_REG_CMP_COUNTER_START_ADDR                          0xc400c
4298 #define USDM_REG_ENABLE_IN1                                      0xc4238
4299 #define USDM_REG_ENABLE_IN2                                      0xc423c
4300 #define USDM_REG_ENABLE_OUT1                                     0xc4240
4301 #define USDM_REG_ENABLE_OUT2                                     0xc4244
4302 /* [RW 4] The initial number of messages that can be sent to the pxp control
4303    interface without receiving any ACK. */
4304 #define USDM_REG_INIT_CREDIT_PXP_CTRL                            0xc44c0
4305 /* [ST 32] The number of ACK after placement messages received */
4306 #define USDM_REG_NUM_OF_ACK_AFTER_PLACE                          0xc4280
4307 /* [ST 32] The number of packet end messages received from the parser */
4308 #define USDM_REG_NUM_OF_PKT_END_MSG                              0xc4278
4309 /* [ST 32] The number of requests received from the pxp async if */
4310 #define USDM_REG_NUM_OF_PXP_ASYNC_REQ                            0xc427c
4311 /* [ST 32] The number of commands received in queue 0 */
4312 #define USDM_REG_NUM_OF_Q0_CMD                                   0xc4248
4313 /* [ST 32] The number of commands received in queue 10 */
4314 #define USDM_REG_NUM_OF_Q10_CMD                                  0xc4270
4315 /* [ST 32] The number of commands received in queue 11 */
4316 #define USDM_REG_NUM_OF_Q11_CMD                                  0xc4274
4317 /* [ST 32] The number of commands received in queue 1 */
4318 #define USDM_REG_NUM_OF_Q1_CMD                                   0xc424c
4319 /* [ST 32] The number of commands received in queue 2 */
4320 #define USDM_REG_NUM_OF_Q2_CMD                                   0xc4250
4321 /* [ST 32] The number of commands received in queue 3 */
4322 #define USDM_REG_NUM_OF_Q3_CMD                                   0xc4254
4323 /* [ST 32] The number of commands received in queue 4 */
4324 #define USDM_REG_NUM_OF_Q4_CMD                                   0xc4258
4325 /* [ST 32] The number of commands received in queue 5 */
4326 #define USDM_REG_NUM_OF_Q5_CMD                                   0xc425c
4327 /* [ST 32] The number of commands received in queue 6 */
4328 #define USDM_REG_NUM_OF_Q6_CMD                                   0xc4260
4329 /* [ST 32] The number of commands received in queue 7 */
4330 #define USDM_REG_NUM_OF_Q7_CMD                                   0xc4264
4331 /* [ST 32] The number of commands received in queue 8 */
4332 #define USDM_REG_NUM_OF_Q8_CMD                                   0xc4268
4333 /* [ST 32] The number of commands received in queue 9 */
4334 #define USDM_REG_NUM_OF_Q9_CMD                                   0xc426c
4335 /* [RW 13] The start address in the internal RAM for the packet end message */
4336 #define USDM_REG_PCK_END_MSG_START_ADDR                          0xc4014
4337 /* [RW 13] The start address in the internal RAM for queue counters */
4338 #define USDM_REG_Q_COUNTER_START_ADDR                            0xc4010
4339 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4340 #define USDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0xc4550
4341 /* [R 1] parser fifo empty in sdm_sync block */
4342 #define USDM_REG_SYNC_PARSER_EMPTY                               0xc4558
4343 /* [R 1] parser serial fifo empty in sdm_sync block */
4344 #define USDM_REG_SYNC_SYNC_EMPTY                                 0xc4560
4345 /* [RW 32] Tick for timer counter. Applicable only when
4346    ~usdm_registers_timer_tick_enable.timer_tick_enable =1 */
4347 #define USDM_REG_TIMER_TICK                                      0xc4000
4348 /* [RW 32] Interrupt mask register #0 read/write */
4349 #define USDM_REG_USDM_INT_MASK_0                                 0xc42a0
4350 #define USDM_REG_USDM_INT_MASK_1                                 0xc42b0
4351 /* [R 32] Interrupt register #0 read */
4352 #define USDM_REG_USDM_INT_STS_0                                  0xc4294
4353 #define USDM_REG_USDM_INT_STS_1                                  0xc42a4
4354 /* [RW 11] Parity mask register #0 read/write */
4355 #define USDM_REG_USDM_PRTY_MASK                                  0xc42c0
4356 /* [R 11] Parity register #0 read */
4357 #define USDM_REG_USDM_PRTY_STS                                   0xc42b4
4358 /* [RC 11] Parity register #0 read clear */
4359 #define USDM_REG_USDM_PRTY_STS_CLR                               0xc42b8
4360 /* [RW 5] The number of time_slots in the arbitration cycle */
4361 #define USEM_REG_ARB_CYCLE_SIZE                                  0x300034
4362 /* [RW 3] The source that is associated with arbitration element 0. Source
4363    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4364    sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4365 #define USEM_REG_ARB_ELEMENT0                                    0x300020
4366 /* [RW 3] The source that is associated with arbitration element 1. Source
4367    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4368    sleeping thread with priority 1; 4- sleeping thread with priority 2.
4369    Could not be equal to register ~usem_registers_arb_element0.arb_element0 */
4370 #define USEM_REG_ARB_ELEMENT1                                    0x300024
4371 /* [RW 3] The source that is associated with arbitration element 2. Source
4372    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4373    sleeping thread with priority 1; 4- sleeping thread with priority 2.
4374    Could not be equal to register ~usem_registers_arb_element0.arb_element0
4375    and ~usem_registers_arb_element1.arb_element1 */
4376 #define USEM_REG_ARB_ELEMENT2                                    0x300028
4377 /* [RW 3] The source that is associated with arbitration element 3. Source
4378    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4379    sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
4380    not be equal to register ~usem_registers_arb_element0.arb_element0 and
4381    ~usem_registers_arb_element1.arb_element1 and
4382    ~usem_registers_arb_element2.arb_element2 */
4383 #define USEM_REG_ARB_ELEMENT3                                    0x30002c
4384 /* [RW 3] The source that is associated with arbitration element 4. Source
4385    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4386    sleeping thread with priority 1; 4- sleeping thread with priority 2.
4387    Could not be equal to register ~usem_registers_arb_element0.arb_element0
4388    and ~usem_registers_arb_element1.arb_element1 and
4389    ~usem_registers_arb_element2.arb_element2 and
4390    ~usem_registers_arb_element3.arb_element3 */
4391 #define USEM_REG_ARB_ELEMENT4                                    0x300030
4392 #define USEM_REG_ENABLE_IN                                       0x3000a4
4393 #define USEM_REG_ENABLE_OUT                                      0x3000a8
4394 /* [RW 32] This address space contains all registers and memories that are
4395    placed in SEM_FAST block. The SEM_FAST registers are described in
4396    appendix B. In order to access the sem_fast registers the base address
4397    ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4398 #define USEM_REG_FAST_MEMORY                                     0x320000
4399 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4400    by the microcode */
4401 #define USEM_REG_FIC0_DISABLE                                    0x300224
4402 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4403    by the microcode */
4404 #define USEM_REG_FIC1_DISABLE                                    0x300234
4405 /* [RW 15] Interrupt table Read and write access to it is not possible in
4406    the middle of the work */
4407 #define USEM_REG_INT_TABLE                                       0x300400
4408 /* [ST 24] Statistics register. The number of messages that entered through
4409    FIC0 */
4410 #define USEM_REG_MSG_NUM_FIC0                                    0x300000
4411 /* [ST 24] Statistics register. The number of messages that entered through
4412    FIC1 */
4413 #define USEM_REG_MSG_NUM_FIC1                                    0x300004
4414 /* [ST 24] Statistics register. The number of messages that were sent to
4415    FOC0 */
4416 #define USEM_REG_MSG_NUM_FOC0                                    0x300008
4417 /* [ST 24] Statistics register. The number of messages that were sent to
4418    FOC1 */
4419 #define USEM_REG_MSG_NUM_FOC1                                    0x30000c
4420 /* [ST 24] Statistics register. The number of messages that were sent to
4421    FOC2 */
4422 #define USEM_REG_MSG_NUM_FOC2                                    0x300010
4423 /* [ST 24] Statistics register. The number of messages that were sent to
4424    FOC3 */
4425 #define USEM_REG_MSG_NUM_FOC3                                    0x300014
4426 /* [RW 1] Disables input messages from the passive buffer May be updated
4427    during run_time by the microcode */
4428 #define USEM_REG_PAS_DISABLE                                     0x30024c
4429 /* [WB 128] Debug only. Passive buffer memory */
4430 #define USEM_REG_PASSIVE_BUFFER                                  0x302000
4431 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4432 #define USEM_REG_PRAM                                            0x340000
4433 /* [R 16] Valid sleeping threads indication have bit per thread */
4434 #define USEM_REG_SLEEP_THREADS_VALID                             0x30026c
4435 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4436 #define USEM_REG_SLOW_EXT_STORE_EMPTY                            0x3002a0
4437 /* [RW 16] List of free threads . There is a bit per thread. */
4438 #define USEM_REG_THREADS_LIST                                    0x3002e4
4439 /* [RW 3] The arbitration scheme of time_slot 0 */
4440 #define USEM_REG_TS_0_AS                                         0x300038
4441 /* [RW 3] The arbitration scheme of time_slot 10 */
4442 #define USEM_REG_TS_10_AS                                        0x300060
4443 /* [RW 3] The arbitration scheme of time_slot 11 */
4444 #define USEM_REG_TS_11_AS                                        0x300064
4445 /* [RW 3] The arbitration scheme of time_slot 12 */
4446 #define USEM_REG_TS_12_AS                                        0x300068
4447 /* [RW 3] The arbitration scheme of time_slot 13 */
4448 #define USEM_REG_TS_13_AS                                        0x30006c
4449 /* [RW 3] The arbitration scheme of time_slot 14 */
4450 #define USEM_REG_TS_14_AS                                        0x300070
4451 /* [RW 3] The arbitration scheme of time_slot 15 */
4452 #define USEM_REG_TS_15_AS                                        0x300074
4453 /* [RW 3] The arbitration scheme of time_slot 16 */
4454 #define USEM_REG_TS_16_AS                                        0x300078
4455 /* [RW 3] The arbitration scheme of time_slot 17 */
4456 #define USEM_REG_TS_17_AS                                        0x30007c
4457 /* [RW 3] The arbitration scheme of time_slot 18 */
4458 #define USEM_REG_TS_18_AS                                        0x300080
4459 /* [RW 3] The arbitration scheme of time_slot 1 */
4460 #define USEM_REG_TS_1_AS                                         0x30003c
4461 /* [RW 3] The arbitration scheme of time_slot 2 */
4462 #define USEM_REG_TS_2_AS                                         0x300040
4463 /* [RW 3] The arbitration scheme of time_slot 3 */
4464 #define USEM_REG_TS_3_AS                                         0x300044
4465 /* [RW 3] The arbitration scheme of time_slot 4 */
4466 #define USEM_REG_TS_4_AS                                         0x300048
4467 /* [RW 3] The arbitration scheme of time_slot 5 */
4468 #define USEM_REG_TS_5_AS                                         0x30004c
4469 /* [RW 3] The arbitration scheme of time_slot 6 */
4470 #define USEM_REG_TS_6_AS                                         0x300050
4471 /* [RW 3] The arbitration scheme of time_slot 7 */
4472 #define USEM_REG_TS_7_AS                                         0x300054
4473 /* [RW 3] The arbitration scheme of time_slot 8 */
4474 #define USEM_REG_TS_8_AS                                         0x300058
4475 /* [RW 3] The arbitration scheme of time_slot 9 */
4476 #define USEM_REG_TS_9_AS                                         0x30005c
4477 /* [RW 32] Interrupt mask register #0 read/write */
4478 #define USEM_REG_USEM_INT_MASK_0                                 0x300110
4479 #define USEM_REG_USEM_INT_MASK_1                                 0x300120
4480 /* [R 32] Interrupt register #0 read */
4481 #define USEM_REG_USEM_INT_STS_0                                  0x300104
4482 #define USEM_REG_USEM_INT_STS_1                                  0x300114
4483 /* [RW 32] Parity mask register #0 read/write */
4484 #define USEM_REG_USEM_PRTY_MASK_0                                0x300130
4485 #define USEM_REG_USEM_PRTY_MASK_1                                0x300140
4486 /* [R 32] Parity register #0 read */
4487 #define USEM_REG_USEM_PRTY_STS_0                                 0x300124
4488 #define USEM_REG_USEM_PRTY_STS_1                                 0x300134
4489 /* [RC 32] Parity register #0 read clear */
4490 #define USEM_REG_USEM_PRTY_STS_CLR_0                             0x300128
4491 #define USEM_REG_USEM_PRTY_STS_CLR_1                             0x300138
4492 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
4493  * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
4494 #define USEM_REG_VFPF_ERR_NUM                                    0x300380
4495 #define VFC_MEMORIES_RST_REG_CAM_RST                             (0x1<<0)
4496 #define VFC_MEMORIES_RST_REG_RAM_RST                             (0x1<<1)
4497 #define VFC_REG_MEMORIES_RST                                     0x1943c
4498 /* [RW 32] Indirect access to AG context with 32-bits granularity. The bits
4499  * [12:8] of the address should be the offset within the accessed LCID
4500  * context; the bits [7:0] are the accessed LCID.Example: to write to REG10
4501  * LCID100. The RBC address should be 13'ha64. */
4502 #define XCM_REG_AG_CTX                                           0x28000
4503 /* [RW 2] The queue index for registration on Aux1 counter flag. */
4504 #define XCM_REG_AUX1_Q                                           0x20134
4505 /* [RW 2] Per each decision rule the queue index to register to. */
4506 #define XCM_REG_AUX_CNT_FLG_Q_19                                 0x201b0
4507 /* [R 5] Used to read the XX protection CAM occupancy counter. */
4508 #define XCM_REG_CAM_OCCUP                                        0x20244
4509 /* [RW 1] CDU AG read Interface enable. If 0 - the request input is
4510    disregarded; valid output is deasserted; all other signals are treated as
4511    usual; if 1 - normal activity. */
4512 #define XCM_REG_CDU_AG_RD_IFEN                                   0x20044
4513 /* [RW 1] CDU AG write Interface enable. If 0 - the request and valid input
4514    are disregarded; all other signals are treated as usual; if 1 - normal
4515    activity. */
4516 #define XCM_REG_CDU_AG_WR_IFEN                                   0x20040
4517 /* [RW 1] CDU STORM read Interface enable. If 0 - the request input is
4518    disregarded; valid output is deasserted; all other signals are treated as
4519    usual; if 1 - normal activity. */
4520 #define XCM_REG_CDU_SM_RD_IFEN                                   0x2004c
4521 /* [RW 1] CDU STORM write Interface enable. If 0 - the request and valid
4522    input is disregarded; all other signals are treated as usual; if 1 -
4523    normal activity. */
4524 #define XCM_REG_CDU_SM_WR_IFEN                                   0x20048
4525 /* [RW 4] CFC output initial credit. Max credit available - 15.Write writes
4526    the initial credit value; read returns the current value of the credit
4527    counter. Must be initialized to 1 at start-up. */
4528 #define XCM_REG_CFC_INIT_CRD                                     0x20404
4529 /* [RW 3] The weight of the CP input in the WRR mechanism. 0 stands for
4530    weight 8 (the most prioritised); 1 stands for weight 1(least
4531    prioritised); 2 stands for weight 2; tc. */
4532 #define XCM_REG_CP_WEIGHT                                        0x200dc
4533 /* [RW 1] Input csem Interface enable. If 0 - the valid input is
4534    disregarded; acknowledge output is deasserted; all other signals are
4535    treated as usual; if 1 - normal activity. */
4536 #define XCM_REG_CSEM_IFEN                                        0x20028
4537 /* [RC 1] Set at message length mismatch (relative to last indication) at
4538    the csem interface. */
4539 #define XCM_REG_CSEM_LENGTH_MIS                                  0x20228
4540 /* [RW 3] The weight of the input csem in the WRR mechanism. 0 stands for
4541    weight 8 (the most prioritised); 1 stands for weight 1(least
4542    prioritised); 2 stands for weight 2; tc. */
4543 #define XCM_REG_CSEM_WEIGHT                                      0x200c4
4544 /* [RW 1] Input dorq Interface enable. If 0 - the valid input is
4545    disregarded; acknowledge output is deasserted; all other signals are
4546    treated as usual; if 1 - normal activity. */
4547 #define XCM_REG_DORQ_IFEN                                        0x20030
4548 /* [RC 1] Set at message length mismatch (relative to last indication) at
4549    the dorq interface. */
4550 #define XCM_REG_DORQ_LENGTH_MIS                                  0x20230
4551 /* [RW 3] The weight of the input dorq in the WRR mechanism. 0 stands for
4552    weight 8 (the most prioritised); 1 stands for weight 1(least
4553    prioritised); 2 stands for weight 2; tc. */
4554 #define XCM_REG_DORQ_WEIGHT                                      0x200cc
4555 /* [RW 8] The Event ID in case the ErrorFlg input message bit is set. */
4556 #define XCM_REG_ERR_EVNT_ID                                      0x200b0
4557 /* [RW 28] The CM erroneous header for QM and Timers formatting. */
4558 #define XCM_REG_ERR_XCM_HDR                                      0x200ac
4559 /* [RW 8] The Event ID for Timers expiration. */
4560 #define XCM_REG_EXPR_EVNT_ID                                     0x200b4
4561 /* [RW 8] FIC0 output initial credit. Max credit available - 255.Write
4562    writes the initial credit value; read returns the current value of the
4563    credit counter. Must be initialized to 64 at start-up. */
4564 #define XCM_REG_FIC0_INIT_CRD                                    0x2040c
4565 /* [RW 8] FIC1 output initial credit. Max credit available - 255.Write
4566    writes the initial credit value; read returns the current value of the
4567    credit counter. Must be initialized to 64 at start-up. */
4568 #define XCM_REG_FIC1_INIT_CRD                                    0x20410
4569 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_0                            0x20118
4570 #define XCM_REG_GLB_DEL_ACK_MAX_CNT_1                            0x2011c
4571 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_0                            0x20108
4572 #define XCM_REG_GLB_DEL_ACK_TMR_VAL_1                            0x2010c
4573 /* [RW 1] Arbitratiojn between Input Arbiter groups: 0 - fair Round-Robin; 1
4574    - strict priority defined by ~xcm_registers_gr_ag_pr.gr_ag_pr;
4575    ~xcm_registers_gr_ld0_pr.gr_ld0_pr and
4576    ~xcm_registers_gr_ld1_pr.gr_ld1_pr. */
4577 #define XCM_REG_GR_ARB_TYPE                                      0x2020c
4578 /* [RW 2] Load (FIC0) channel group priority. The lowest priority is 0; the
4579    highest priority is 3. It is supposed that the Channel group is the
4580    compliment of the other 3 groups. */
4581 #define XCM_REG_GR_LD0_PR                                        0x20214
4582 /* [RW 2] Load (FIC1) channel group priority. The lowest priority is 0; the
4583    highest priority is 3. It is supposed that the Channel group is the
4584    compliment of the other 3 groups. */
4585 #define XCM_REG_GR_LD1_PR                                        0x20218
4586 /* [RW 1] Input nig0 Interface enable. If 0 - the valid input is
4587    disregarded; acknowledge output is deasserted; all other signals are
4588    treated as usual; if 1 - normal activity. */
4589 #define XCM_REG_NIG0_IFEN                                        0x20038
4590 /* [RC 1] Set at message length mismatch (relative to last indication) at
4591    the nig0 interface. */
4592 #define XCM_REG_NIG0_LENGTH_MIS                                  0x20238
4593 /* [RW 3] The weight of the input nig0 in the WRR mechanism. 0 stands for
4594    weight 8 (the most prioritised); 1 stands for weight 1(least
4595    prioritised); 2 stands for weight 2; tc. */
4596 #define XCM_REG_NIG0_WEIGHT                                      0x200d4
4597 /* [RW 1] Input nig1 Interface enable. If 0 - the valid input is
4598    disregarded; acknowledge output is deasserted; all other signals are
4599    treated as usual; if 1 - normal activity. */
4600 #define XCM_REG_NIG1_IFEN                                        0x2003c
4601 /* [RC 1] Set at message length mismatch (relative to last indication) at
4602    the nig1 interface. */
4603 #define XCM_REG_NIG1_LENGTH_MIS                                  0x2023c
4604 /* [RW 5] The number of double REG-pairs; loaded from the STORM context and
4605    sent to STORM; for a specific connection type. The double REG-pairs are
4606    used in order to align to STORM context row size of 128 bits. The offset
4607    of these data in the STORM context is always 0. Index _i stands for the
4608    connection type (one of 16). */
4609 #define XCM_REG_N_SM_CTX_LD_0                                    0x20060
4610 #define XCM_REG_N_SM_CTX_LD_1                                    0x20064
4611 #define XCM_REG_N_SM_CTX_LD_2                                    0x20068
4612 #define XCM_REG_N_SM_CTX_LD_3                                    0x2006c
4613 #define XCM_REG_N_SM_CTX_LD_4                                    0x20070
4614 #define XCM_REG_N_SM_CTX_LD_5                                    0x20074
4615 /* [RW 1] Input pbf Interface enable. If 0 - the valid input is disregarded;
4616    acknowledge output is deasserted; all other signals are treated as usual;
4617    if 1 - normal activity. */
4618 #define XCM_REG_PBF_IFEN                                         0x20034
4619 /* [RC 1] Set at message length mismatch (relative to last indication) at
4620    the pbf interface. */
4621 #define XCM_REG_PBF_LENGTH_MIS                                   0x20234
4622 /* [RW 3] The weight of the input pbf in the WRR mechanism. 0 stands for
4623    weight 8 (the most prioritised); 1 stands for weight 1(least
4624    prioritised); 2 stands for weight 2; tc. */
4625 #define XCM_REG_PBF_WEIGHT                                       0x200d0
4626 #define XCM_REG_PHYS_QNUM3_0                                     0x20100
4627 #define XCM_REG_PHYS_QNUM3_1                                     0x20104
4628 /* [RW 8] The Event ID for Timers formatting in case of stop done. */
4629 #define XCM_REG_STOP_EVNT_ID                                     0x200b8
4630 /* [RC 1] Set at message length mismatch (relative to last indication) at
4631    the STORM interface. */
4632 #define XCM_REG_STORM_LENGTH_MIS                                 0x2021c
4633 /* [RW 3] The weight of the STORM input in the WRR mechanism. 0 stands for
4634    weight 8 (the most prioritised); 1 stands for weight 1(least
4635    prioritised); 2 stands for weight 2; tc. */
4636 #define XCM_REG_STORM_WEIGHT                                     0x200bc
4637 /* [RW 1] STORM - CM Interface enable. If 0 - the valid input is
4638    disregarded; acknowledge output is deasserted; all other signals are
4639    treated as usual; if 1 - normal activity. */
4640 #define XCM_REG_STORM_XCM_IFEN                                   0x20010
4641 /* [RW 4] Timers output initial credit. Max credit available - 15.Write
4642    writes the initial credit value; read returns the current value of the
4643    credit counter. Must be initialized to 4 at start-up. */
4644 #define XCM_REG_TM_INIT_CRD                                      0x2041c
4645 /* [RW 3] The weight of the Timers input in the WRR mechanism. 0 stands for
4646    weight 8 (the most prioritised); 1 stands for weight 1(least
4647    prioritised); 2 stands for weight 2; tc. */
4648 #define XCM_REG_TM_WEIGHT                                        0x200ec
4649 /* [RW 28] The CM header for Timers expiration command. */
4650 #define XCM_REG_TM_XCM_HDR                                       0x200a8
4651 /* [RW 1] Timers - CM Interface enable. If 0 - the valid input is
4652    disregarded; acknowledge output is deasserted; all other signals are
4653    treated as usual; if 1 - normal activity. */
4654 #define XCM_REG_TM_XCM_IFEN                                      0x2001c
4655 /* [RW 1] Input tsem Interface enable. If 0 - the valid input is
4656    disregarded; acknowledge output is deasserted; all other signals are
4657    treated as usual; if 1 - normal activity. */
4658 #define XCM_REG_TSEM_IFEN                                        0x20024
4659 /* [RC 1] Set at message length mismatch (relative to last indication) at
4660    the tsem interface. */
4661 #define XCM_REG_TSEM_LENGTH_MIS                                  0x20224
4662 /* [RW 3] The weight of the input tsem in the WRR mechanism. 0 stands for
4663    weight 8 (the most prioritised); 1 stands for weight 1(least
4664    prioritised); 2 stands for weight 2; tc. */
4665 #define XCM_REG_TSEM_WEIGHT                                      0x200c0
4666 /* [RW 2] The queue index for registration on UNA greater NXT decision rule. */
4667 #define XCM_REG_UNA_GT_NXT_Q                                     0x20120
4668 /* [RW 1] Input usem Interface enable. If 0 - the valid input is
4669    disregarded; acknowledge output is deasserted; all other signals are
4670    treated as usual; if 1 - normal activity. */
4671 #define XCM_REG_USEM_IFEN                                        0x2002c
4672 /* [RC 1] Message length mismatch (relative to last indication) at the usem
4673    interface. */
4674 #define XCM_REG_USEM_LENGTH_MIS                                  0x2022c
4675 /* [RW 3] The weight of the input usem in the WRR mechanism. 0 stands for
4676    weight 8 (the most prioritised); 1 stands for weight 1(least
4677    prioritised); 2 stands for weight 2; tc. */
4678 #define XCM_REG_USEM_WEIGHT                                      0x200c8
4679 #define XCM_REG_WU_DA_CNT_CMD00                                  0x201d4
4680 #define XCM_REG_WU_DA_CNT_CMD01                                  0x201d8
4681 #define XCM_REG_WU_DA_CNT_CMD10                                  0x201dc
4682 #define XCM_REG_WU_DA_CNT_CMD11                                  0x201e0
4683 #define XCM_REG_WU_DA_CNT_UPD_VAL00                              0x201e4
4684 #define XCM_REG_WU_DA_CNT_UPD_VAL01                              0x201e8
4685 #define XCM_REG_WU_DA_CNT_UPD_VAL10                              0x201ec
4686 #define XCM_REG_WU_DA_CNT_UPD_VAL11                              0x201f0
4687 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD00                      0x201c4
4688 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD01                      0x201c8
4689 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD10                      0x201cc
4690 #define XCM_REG_WU_DA_SET_TMR_CNT_FLG_CMD11                      0x201d0
4691 /* [RW 1] CM - CFC Interface enable. If 0 - the valid input is disregarded;
4692    acknowledge output is deasserted; all other signals are treated as usual;
4693    if 1 - normal activity. */
4694 #define XCM_REG_XCM_CFC_IFEN                                     0x20050
4695 /* [RW 14] Interrupt mask register #0 read/write */
4696 #define XCM_REG_XCM_INT_MASK                                     0x202b4
4697 /* [R 14] Interrupt register #0 read */
4698 #define XCM_REG_XCM_INT_STS                                      0x202a8
4699 /* [R 30] Parity register #0 read */
4700 #define XCM_REG_XCM_PRTY_STS                                     0x202b8
4701 /* [RW 4] The size of AG context region 0 in REG-pairs. Designates the MS
4702    REG-pair number (e.g. if region 0 is 6 REG-pairs; the value should be 5).
4703    Is used to determine the number of the AG context REG-pairs written back;
4704    when the Reg1WbFlg isn't set. */
4705 #define XCM_REG_XCM_REG0_SZ                                      0x200f4
4706 /* [RW 1] CM - STORM 0 Interface enable. If 0 - the acknowledge input is
4707    disregarded; valid is deasserted; all other signals are treated as usual;
4708    if 1 - normal activity. */
4709 #define XCM_REG_XCM_STORM0_IFEN                                  0x20004
4710 /* [RW 1] CM - STORM 1 Interface enable. If 0 - the acknowledge input is
4711    disregarded; valid is deasserted; all other signals are treated as usual;
4712    if 1 - normal activity. */
4713 #define XCM_REG_XCM_STORM1_IFEN                                  0x20008
4714 /* [RW 1] CM - Timers Interface enable. If 0 - the valid input is
4715    disregarded; acknowledge output is deasserted; all other signals are
4716    treated as usual; if 1 - normal activity. */
4717 #define XCM_REG_XCM_TM_IFEN                                      0x20020
4718 /* [RW 1] CM - QM Interface enable. If 0 - the acknowledge input is
4719    disregarded; valid is deasserted; all other signals are treated as usual;
4720    if 1 - normal activity. */
4721 #define XCM_REG_XCM_XQM_IFEN                                     0x2000c
4722 /* [RW 1] If set the Q index; received from the QM is inserted to event ID. */
4723 #define XCM_REG_XCM_XQM_USE_Q                                    0x200f0
4724 /* [RW 4] The value by which CFC updates the activity counter at QM bypass. */
4725 #define XCM_REG_XQM_BYP_ACT_UPD                                  0x200fc
4726 /* [RW 6] QM output initial credit. Max credit available - 32.Write writes
4727    the initial credit value; read returns the current value of the credit
4728    counter. Must be initialized to 32 at start-up. */
4729 #define XCM_REG_XQM_INIT_CRD                                     0x20420
4730 /* [RW 3] The weight of the QM (primary) input in the WRR mechanism. 0
4731    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4732    prioritised); 2 stands for weight 2; tc. */
4733 #define XCM_REG_XQM_P_WEIGHT                                     0x200e4
4734 /* [RW 3] The weight of the QM (secondary) input in the WRR mechanism. 0
4735    stands for weight 8 (the most prioritised); 1 stands for weight 1(least
4736    prioritised); 2 stands for weight 2; tc. */
4737 #define XCM_REG_XQM_S_WEIGHT                                     0x200e8
4738 /* [RW 28] The CM header value for QM request (primary). */
4739 #define XCM_REG_XQM_XCM_HDR_P                                    0x200a0
4740 /* [RW 28] The CM header value for QM request (secondary). */
4741 #define XCM_REG_XQM_XCM_HDR_S                                    0x200a4
4742 /* [RW 1] QM - CM Interface enable. If 0 - the valid input is disregarded;
4743    acknowledge output is deasserted; all other signals are treated as usual;
4744    if 1 - normal activity. */
4745 #define XCM_REG_XQM_XCM_IFEN                                     0x20014
4746 /* [RW 1] Input SDM Interface enable. If 0 - the valid input is disregarded;
4747    acknowledge output is deasserted; all other signals are treated as usual;
4748    if 1 - normal activity. */
4749 #define XCM_REG_XSDM_IFEN                                        0x20018
4750 /* [RC 1] Set at message length mismatch (relative to last indication) at
4751    the SDM interface. */
4752 #define XCM_REG_XSDM_LENGTH_MIS                                  0x20220
4753 /* [RW 3] The weight of the SDM input in the WRR mechanism. 0 stands for
4754    weight 8 (the most prioritised); 1 stands for weight 1(least
4755    prioritised); 2 stands for weight 2; tc. */
4756 #define XCM_REG_XSDM_WEIGHT                                      0x200e0
4757 /* [RW 17] Indirect access to the descriptor table of the XX protection
4758    mechanism. The fields are: [5:0] - message length; 11:6] - message
4759    pointer; 16:12] - next pointer. */
4760 #define XCM_REG_XX_DESCR_TABLE                                   0x20480
4761 #define XCM_REG_XX_DESCR_TABLE_SIZE                              32
4762 /* [R 6] Used to read the XX protection Free counter. */
4763 #define XCM_REG_XX_FREE                                          0x20240
4764 /* [RW 6] Initial value for the credit counter; responsible for fulfilling
4765    of the Input Stage XX protection buffer by the XX protection pending
4766    messages. Max credit available - 3.Write writes the initial credit value;
4767    read returns the current value of the credit counter. Must be initialized
4768    to 2 at start-up. */
4769 #define XCM_REG_XX_INIT_CRD                                      0x20424
4770 /* [RW 6] The maximum number of pending messages; which may be stored in XX
4771    protection. ~xcm_registers_xx_free.xx_free read on read. */
4772 #define XCM_REG_XX_MSG_NUM                                       0x20428
4773 /* [RW 8] The Event ID; sent to the STORM in case of XX overflow. */
4774 #define XCM_REG_XX_OVFL_EVNT_ID                                  0x20058
4775 /* [RW 16] Indirect access to the XX table of the XX protection mechanism.
4776    The fields are:[4:0] - tail pointer; 9:5] - Link List size; 14:10] -
4777    header pointer. */
4778 #define XCM_REG_XX_TABLE                                         0x20500
4779 /* [RW 8] The event id for aggregated interrupt 0 */
4780 #define XSDM_REG_AGG_INT_EVENT_0                                 0x166038
4781 #define XSDM_REG_AGG_INT_EVENT_1                                 0x16603c
4782 #define XSDM_REG_AGG_INT_EVENT_10                                0x166060
4783 #define XSDM_REG_AGG_INT_EVENT_11                                0x166064
4784 #define XSDM_REG_AGG_INT_EVENT_12                                0x166068
4785 #define XSDM_REG_AGG_INT_EVENT_13                                0x16606c
4786 #define XSDM_REG_AGG_INT_EVENT_14                                0x166070
4787 #define XSDM_REG_AGG_INT_EVENT_2                                 0x166040
4788 #define XSDM_REG_AGG_INT_EVENT_3                                 0x166044
4789 #define XSDM_REG_AGG_INT_EVENT_4                                 0x166048
4790 #define XSDM_REG_AGG_INT_EVENT_5                                 0x16604c
4791 #define XSDM_REG_AGG_INT_EVENT_6                                 0x166050
4792 #define XSDM_REG_AGG_INT_EVENT_7                                 0x166054
4793 #define XSDM_REG_AGG_INT_EVENT_8                                 0x166058
4794 #define XSDM_REG_AGG_INT_EVENT_9                                 0x16605c
4795 /* [RW 1] For each aggregated interrupt index whether the mode is normal (0)
4796    or auto-mask-mode (1) */
4797 #define XSDM_REG_AGG_INT_MODE_0                                  0x1661b8
4798 #define XSDM_REG_AGG_INT_MODE_1                                  0x1661bc
4799 /* [RW 13] The start address in the internal RAM for the cfc_rsp lcid */
4800 #define XSDM_REG_CFC_RSP_START_ADDR                              0x166008
4801 /* [RW 16] The maximum value of the completion counter #0 */
4802 #define XSDM_REG_CMP_COUNTER_MAX0                                0x16601c
4803 /* [RW 16] The maximum value of the completion counter #1 */
4804 #define XSDM_REG_CMP_COUNTER_MAX1                                0x166020
4805 /* [RW 16] The maximum value of the completion counter #2 */
4806 #define XSDM_REG_CMP_COUNTER_MAX2                                0x166024
4807 /* [RW 16] The maximum value of the completion counter #3 */
4808 #define XSDM_REG_CMP_COUNTER_MAX3                                0x166028
4809 /* [RW 13] The start address in the internal RAM for the completion
4810    counters. */
4811 #define XSDM_REG_CMP_COUNTER_START_ADDR                          0x16600c
4812 #define XSDM_REG_ENABLE_IN1                                      0x166238
4813 #define XSDM_REG_ENABLE_IN2                                      0x16623c
4814 #define XSDM_REG_ENABLE_OUT1                                     0x166240
4815 #define XSDM_REG_ENABLE_OUT2                                     0x166244
4816 /* [RW 4] The initial number of messages that can be sent to the pxp control
4817    interface without receiving any ACK. */
4818 #define XSDM_REG_INIT_CREDIT_PXP_CTRL                            0x1664bc
4819 /* [ST 32] The number of ACK after placement messages received */
4820 #define XSDM_REG_NUM_OF_ACK_AFTER_PLACE                          0x16627c
4821 /* [ST 32] The number of packet end messages received from the parser */
4822 #define XSDM_REG_NUM_OF_PKT_END_MSG                              0x166274
4823 /* [ST 32] The number of requests received from the pxp async if */
4824 #define XSDM_REG_NUM_OF_PXP_ASYNC_REQ                            0x166278
4825 /* [ST 32] The number of commands received in queue 0 */
4826 #define XSDM_REG_NUM_OF_Q0_CMD                                   0x166248
4827 /* [ST 32] The number of commands received in queue 10 */
4828 #define XSDM_REG_NUM_OF_Q10_CMD                                  0x16626c
4829 /* [ST 32] The number of commands received in queue 11 */
4830 #define XSDM_REG_NUM_OF_Q11_CMD                                  0x166270
4831 /* [ST 32] The number of commands received in queue 1 */
4832 #define XSDM_REG_NUM_OF_Q1_CMD                                   0x16624c
4833 /* [ST 32] The number of commands received in queue 3 */
4834 #define XSDM_REG_NUM_OF_Q3_CMD                                   0x166250
4835 /* [ST 32] The number of commands received in queue 4 */
4836 #define XSDM_REG_NUM_OF_Q4_CMD                                   0x166254
4837 /* [ST 32] The number of commands received in queue 5 */
4838 #define XSDM_REG_NUM_OF_Q5_CMD                                   0x166258
4839 /* [ST 32] The number of commands received in queue 6 */
4840 #define XSDM_REG_NUM_OF_Q6_CMD                                   0x16625c
4841 /* [ST 32] The number of commands received in queue 7 */
4842 #define XSDM_REG_NUM_OF_Q7_CMD                                   0x166260
4843 /* [ST 32] The number of commands received in queue 8 */
4844 #define XSDM_REG_NUM_OF_Q8_CMD                                   0x166264
4845 /* [ST 32] The number of commands received in queue 9 */
4846 #define XSDM_REG_NUM_OF_Q9_CMD                                   0x166268
4847 /* [RW 13] The start address in the internal RAM for queue counters */
4848 #define XSDM_REG_Q_COUNTER_START_ADDR                            0x166010
4849 /* [R 1] pxp_ctrl rd_data fifo empty in sdm_dma_rsp block */
4850 #define XSDM_REG_RSP_PXP_CTRL_RDATA_EMPTY                        0x166548
4851 /* [R 1] parser fifo empty in sdm_sync block */
4852 #define XSDM_REG_SYNC_PARSER_EMPTY                               0x166550
4853 /* [R 1] parser serial fifo empty in sdm_sync block */
4854 #define XSDM_REG_SYNC_SYNC_EMPTY                                 0x166558
4855 /* [RW 32] Tick for timer counter. Applicable only when
4856    ~xsdm_registers_timer_tick_enable.timer_tick_enable =1 */
4857 #define XSDM_REG_TIMER_TICK                                      0x166000
4858 /* [RW 32] Interrupt mask register #0 read/write */
4859 #define XSDM_REG_XSDM_INT_MASK_0                                 0x16629c
4860 #define XSDM_REG_XSDM_INT_MASK_1                                 0x1662ac
4861 /* [R 32] Interrupt register #0 read */
4862 #define XSDM_REG_XSDM_INT_STS_0                                  0x166290
4863 #define XSDM_REG_XSDM_INT_STS_1                                  0x1662a0
4864 /* [RW 11] Parity mask register #0 read/write */
4865 #define XSDM_REG_XSDM_PRTY_MASK                                  0x1662bc
4866 /* [R 11] Parity register #0 read */
4867 #define XSDM_REG_XSDM_PRTY_STS                                   0x1662b0
4868 /* [RC 11] Parity register #0 read clear */
4869 #define XSDM_REG_XSDM_PRTY_STS_CLR                               0x1662b4
4870 /* [RW 5] The number of time_slots in the arbitration cycle */
4871 #define XSEM_REG_ARB_CYCLE_SIZE                                  0x280034
4872 /* [RW 3] The source that is associated with arbitration element 0. Source
4873    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4874    sleeping thread with priority 1; 4- sleeping thread with priority 2 */
4875 #define XSEM_REG_ARB_ELEMENT0                                    0x280020
4876 /* [RW 3] The source that is associated with arbitration element 1. Source
4877    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4878    sleeping thread with priority 1; 4- sleeping thread with priority 2.
4879    Could not be equal to register ~xsem_registers_arb_element0.arb_element0 */
4880 #define XSEM_REG_ARB_ELEMENT1                                    0x280024
4881 /* [RW 3] The source that is associated with arbitration element 2. Source
4882    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4883    sleeping thread with priority 1; 4- sleeping thread with priority 2.
4884    Could not be equal to register ~xsem_registers_arb_element0.arb_element0
4885    and ~xsem_registers_arb_element1.arb_element1 */
4886 #define XSEM_REG_ARB_ELEMENT2                                    0x280028
4887 /* [RW 3] The source that is associated with arbitration element 3. Source
4888    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4889    sleeping thread with priority 1; 4- sleeping thread with priority 2.Could
4890    not be equal to register ~xsem_registers_arb_element0.arb_element0 and
4891    ~xsem_registers_arb_element1.arb_element1 and
4892    ~xsem_registers_arb_element2.arb_element2 */
4893 #define XSEM_REG_ARB_ELEMENT3                                    0x28002c
4894 /* [RW 3] The source that is associated with arbitration element 4. Source
4895    decoding is: 0- foc0; 1-fic1; 2-sleeping thread with priority 0; 3-
4896    sleeping thread with priority 1; 4- sleeping thread with priority 2.
4897    Could not be equal to register ~xsem_registers_arb_element0.arb_element0
4898    and ~xsem_registers_arb_element1.arb_element1 and
4899    ~xsem_registers_arb_element2.arb_element2 and
4900    ~xsem_registers_arb_element3.arb_element3 */
4901 #define XSEM_REG_ARB_ELEMENT4                                    0x280030
4902 #define XSEM_REG_ENABLE_IN                                       0x2800a4
4903 #define XSEM_REG_ENABLE_OUT                                      0x2800a8
4904 /* [RW 32] This address space contains all registers and memories that are
4905    placed in SEM_FAST block. The SEM_FAST registers are described in
4906    appendix B. In order to access the sem_fast registers the base address
4907    ~fast_memory.fast_memory should be added to eachsem_fast register offset. */
4908 #define XSEM_REG_FAST_MEMORY                                     0x2a0000
4909 /* [RW 1] Disables input messages from FIC0 May be updated during run_time
4910    by the microcode */
4911 #define XSEM_REG_FIC0_DISABLE                                    0x280224
4912 /* [RW 1] Disables input messages from FIC1 May be updated during run_time
4913    by the microcode */
4914 #define XSEM_REG_FIC1_DISABLE                                    0x280234
4915 /* [RW 15] Interrupt table Read and write access to it is not possible in
4916    the middle of the work */
4917 #define XSEM_REG_INT_TABLE                                       0x280400
4918 /* [ST 24] Statistics register. The number of messages that entered through
4919    FIC0 */
4920 #define XSEM_REG_MSG_NUM_FIC0                                    0x280000
4921 /* [ST 24] Statistics register. The number of messages that entered through
4922    FIC1 */
4923 #define XSEM_REG_MSG_NUM_FIC1                                    0x280004
4924 /* [ST 24] Statistics register. The number of messages that were sent to
4925    FOC0 */
4926 #define XSEM_REG_MSG_NUM_FOC0                                    0x280008
4927 /* [ST 24] Statistics register. The number of messages that were sent to
4928    FOC1 */
4929 #define XSEM_REG_MSG_NUM_FOC1                                    0x28000c
4930 /* [ST 24] Statistics register. The number of messages that were sent to
4931    FOC2 */
4932 #define XSEM_REG_MSG_NUM_FOC2                                    0x280010
4933 /* [ST 24] Statistics register. The number of messages that were sent to
4934    FOC3 */
4935 #define XSEM_REG_MSG_NUM_FOC3                                    0x280014
4936 /* [RW 1] Disables input messages from the passive buffer May be updated
4937    during run_time by the microcode */
4938 #define XSEM_REG_PAS_DISABLE                                     0x28024c
4939 /* [WB 128] Debug only. Passive buffer memory */
4940 #define XSEM_REG_PASSIVE_BUFFER                                  0x282000
4941 /* [WB 46] pram memory. B45 is parity; b[44:0] - data. */
4942 #define XSEM_REG_PRAM                                            0x2c0000
4943 /* [R 16] Valid sleeping threads indication have bit per thread */
4944 #define XSEM_REG_SLEEP_THREADS_VALID                             0x28026c
4945 /* [R 1] EXT_STORE FIFO is empty in sem_slow_ls_ext */
4946 #define XSEM_REG_SLOW_EXT_STORE_EMPTY                            0x2802a0
4947 /* [RW 16] List of free threads . There is a bit per thread. */
4948 #define XSEM_REG_THREADS_LIST                                    0x2802e4
4949 /* [RW 3] The arbitration scheme of time_slot 0 */
4950 #define XSEM_REG_TS_0_AS                                         0x280038
4951 /* [RW 3] The arbitration scheme of time_slot 10 */
4952 #define XSEM_REG_TS_10_AS                                        0x280060
4953 /* [RW 3] The arbitration scheme of time_slot 11 */
4954 #define XSEM_REG_TS_11_AS                                        0x280064
4955 /* [RW 3] The arbitration scheme of time_slot 12 */
4956 #define XSEM_REG_TS_12_AS                                        0x280068
4957 /* [RW 3] The arbitration scheme of time_slot 13 */
4958 #define XSEM_REG_TS_13_AS                                        0x28006c
4959 /* [RW 3] The arbitration scheme of time_slot 14 */
4960 #define XSEM_REG_TS_14_AS                                        0x280070
4961 /* [RW 3] The arbitration scheme of time_slot 15 */
4962 #define XSEM_REG_TS_15_AS                                        0x280074
4963 /* [RW 3] The arbitration scheme of time_slot 16 */
4964 #define XSEM_REG_TS_16_AS                                        0x280078
4965 /* [RW 3] The arbitration scheme of time_slot 17 */
4966 #define XSEM_REG_TS_17_AS                                        0x28007c
4967 /* [RW 3] The arbitration scheme of time_slot 18 */
4968 #define XSEM_REG_TS_18_AS                                        0x280080
4969 /* [RW 3] The arbitration scheme of time_slot 1 */
4970 #define XSEM_REG_TS_1_AS                                         0x28003c
4971 /* [RW 3] The arbitration scheme of time_slot 2 */
4972 #define XSEM_REG_TS_2_AS                                         0x280040
4973 /* [RW 3] The arbitration scheme of time_slot 3 */
4974 #define XSEM_REG_TS_3_AS                                         0x280044
4975 /* [RW 3] The arbitration scheme of time_slot 4 */
4976 #define XSEM_REG_TS_4_AS                                         0x280048
4977 /* [RW 3] The arbitration scheme of time_slot 5 */
4978 #define XSEM_REG_TS_5_AS                                         0x28004c
4979 /* [RW 3] The arbitration scheme of time_slot 6 */
4980 #define XSEM_REG_TS_6_AS                                         0x280050
4981 /* [RW 3] The arbitration scheme of time_slot 7 */
4982 #define XSEM_REG_TS_7_AS                                         0x280054
4983 /* [RW 3] The arbitration scheme of time_slot 8 */
4984 #define XSEM_REG_TS_8_AS                                         0x280058
4985 /* [RW 3] The arbitration scheme of time_slot 9 */
4986 #define XSEM_REG_TS_9_AS                                         0x28005c
4987 /* [W 7] VF or PF ID for reset error bit. Values 0-63 reset error bit for 64
4988  * VF; values 64-67 reset error for 4 PF; values 68-127 are not valid. */
4989 #define XSEM_REG_VFPF_ERR_NUM                                    0x280380
4990 /* [RW 32] Interrupt mask register #0 read/write */
4991 #define XSEM_REG_XSEM_INT_MASK_0                                 0x280110
4992 #define XSEM_REG_XSEM_INT_MASK_1                                 0x280120
4993 /* [R 32] Interrupt register #0 read */
4994 #define XSEM_REG_XSEM_INT_STS_0                                  0x280104
4995 #define XSEM_REG_XSEM_INT_STS_1                                  0x280114
4996 /* [RW 32] Parity mask register #0 read/write */
4997 #define XSEM_REG_XSEM_PRTY_MASK_0                                0x280130
4998 #define XSEM_REG_XSEM_PRTY_MASK_1                                0x280140
4999 /* [R 32] Parity register #0 read */
5000 #define XSEM_REG_XSEM_PRTY_STS_0                                 0x280124
5001 #define XSEM_REG_XSEM_PRTY_STS_1                                 0x280134
5002 /* [RC 32] Parity register #0 read clear */
5003 #define XSEM_REG_XSEM_PRTY_STS_CLR_0                             0x280128
5004 #define XSEM_REG_XSEM_PRTY_STS_CLR_1                             0x280138
5005 #define MCPR_NVM_ACCESS_ENABLE_EN                                (1L<<0)
5006 #define MCPR_NVM_ACCESS_ENABLE_WR_EN                             (1L<<1)
5007 #define MCPR_NVM_ADDR_NVM_ADDR_VALUE                             (0xffffffL<<0)
5008 #define MCPR_NVM_CFG4_FLASH_SIZE                                 (0x7L<<0)
5009 #define MCPR_NVM_COMMAND_DOIT                                    (1L<<4)
5010 #define MCPR_NVM_COMMAND_DONE                                    (1L<<3)
5011 #define MCPR_NVM_COMMAND_FIRST                                   (1L<<7)
5012 #define MCPR_NVM_COMMAND_LAST                                    (1L<<8)
5013 #define MCPR_NVM_COMMAND_WR                                      (1L<<5)
5014 #define MCPR_NVM_SW_ARB_ARB_ARB1                                 (1L<<9)
5015 #define MCPR_NVM_SW_ARB_ARB_REQ_CLR1                             (1L<<5)
5016 #define MCPR_NVM_SW_ARB_ARB_REQ_SET1                             (1L<<1)
5017 #define BIGMAC_REGISTER_BMAC_CONTROL                             (0x00<<3)
5018 #define BIGMAC_REGISTER_BMAC_XGXS_CONTROL                        (0x01<<3)
5019 #define BIGMAC_REGISTER_CNT_MAX_SIZE                             (0x05<<3)
5020 #define BIGMAC_REGISTER_RX_CONTROL                               (0x21<<3)
5021 #define BIGMAC_REGISTER_RX_LLFC_MSG_FLDS                         (0x46<<3)
5022 #define BIGMAC_REGISTER_RX_MAX_SIZE                              (0x23<<3)
5023 #define BIGMAC_REGISTER_RX_STAT_GR64                             (0x26<<3)
5024 #define BIGMAC_REGISTER_RX_STAT_GRIPJ                            (0x42<<3)
5025 #define BIGMAC_REGISTER_TX_CONTROL                               (0x07<<3)
5026 #define BIGMAC_REGISTER_TX_MAX_SIZE                              (0x09<<3)
5027 #define BIGMAC_REGISTER_TX_PAUSE_THRESHOLD                       (0x0A<<3)
5028 #define BIGMAC_REGISTER_TX_SOURCE_ADDR                           (0x08<<3)
5029 #define BIGMAC_REGISTER_TX_STAT_GTBYT                            (0x20<<3)
5030 #define BIGMAC_REGISTER_TX_STAT_GTPKT                            (0x0C<<3)
5031 #define BIGMAC2_REGISTER_BMAC_CONTROL                            (0x00<<3)
5032 #define BIGMAC2_REGISTER_BMAC_XGXS_CONTROL                       (0x01<<3)
5033 #define BIGMAC2_REGISTER_CNT_MAX_SIZE                            (0x05<<3)
5034 #define BIGMAC2_REGISTER_PFC_CONTROL                             (0x06<<3)
5035 #define BIGMAC2_REGISTER_RX_CONTROL                              (0x3A<<3)
5036 #define BIGMAC2_REGISTER_RX_LLFC_MSG_FLDS                        (0x62<<3)
5037 #define BIGMAC2_REGISTER_RX_MAX_SIZE                             (0x3C<<3)
5038 #define BIGMAC2_REGISTER_RX_STAT_GR64                            (0x40<<3)
5039 #define BIGMAC2_REGISTER_RX_STAT_GRIPJ                           (0x5f<<3)
5040 #define BIGMAC2_REGISTER_RX_STAT_GRPP                            (0x51<<3)
5041 #define BIGMAC2_REGISTER_TX_CONTROL                              (0x1C<<3)
5042 #define BIGMAC2_REGISTER_TX_MAX_SIZE                             (0x1E<<3)
5043 #define BIGMAC2_REGISTER_TX_PAUSE_CONTROL                        (0x20<<3)
5044 #define BIGMAC2_REGISTER_TX_SOURCE_ADDR                  (0x1D<<3)
5045 #define BIGMAC2_REGISTER_TX_STAT_GTBYT                           (0x39<<3)
5046 #define BIGMAC2_REGISTER_TX_STAT_GTPOK                           (0x22<<3)
5047 #define BIGMAC2_REGISTER_TX_STAT_GTPP                            (0x24<<3)
5048 #define EMAC_LED_1000MB_OVERRIDE                                 (1L<<1)
5049 #define EMAC_LED_100MB_OVERRIDE                                  (1L<<2)
5050 #define EMAC_LED_10MB_OVERRIDE                                   (1L<<3)
5051 #define EMAC_LED_2500MB_OVERRIDE                                 (1L<<12)
5052 #define EMAC_LED_OVERRIDE                                        (1L<<0)
5053 #define EMAC_LED_TRAFFIC                                         (1L<<6)
5054 #define EMAC_MDIO_COMM_COMMAND_ADDRESS                           (0L<<26)
5055 #define EMAC_MDIO_COMM_COMMAND_READ_45                           (3L<<26)
5056 #define EMAC_MDIO_COMM_COMMAND_WRITE_45                          (1L<<26)
5057 #define EMAC_MDIO_COMM_DATA                                      (0xffffL<<0)
5058 #define EMAC_MDIO_COMM_START_BUSY                                (1L<<29)
5059 #define EMAC_MDIO_MODE_AUTO_POLL                                 (1L<<4)
5060 #define EMAC_MDIO_MODE_CLAUSE_45                                 (1L<<31)
5061 #define EMAC_MDIO_MODE_CLOCK_CNT                                 (0x3fL<<16)
5062 #define EMAC_MDIO_MODE_CLOCK_CNT_BITSHIFT                        16
5063 #define EMAC_MODE_25G_MODE                                       (1L<<5)
5064 #define EMAC_MODE_HALF_DUPLEX                                    (1L<<1)
5065 #define EMAC_MODE_PORT_GMII                                      (2L<<2)
5066 #define EMAC_MODE_PORT_MII                                       (1L<<2)
5067 #define EMAC_MODE_PORT_MII_10M                                   (3L<<2)
5068 #define EMAC_MODE_RESET                                          (1L<<0)
5069 #define EMAC_REG_EMAC_LED                                        0xc
5070 #define EMAC_REG_EMAC_MAC_MATCH                                  0x10
5071 #define EMAC_REG_EMAC_MDIO_COMM                                  0xac
5072 #define EMAC_REG_EMAC_MDIO_MODE                                  0xb4
5073 #define EMAC_REG_EMAC_MODE                                       0x0
5074 #define EMAC_REG_EMAC_RX_MODE                                    0xc8
5075 #define EMAC_REG_EMAC_RX_MTU_SIZE                                0x9c
5076 #define EMAC_REG_EMAC_RX_STAT_AC                                 0x180
5077 #define EMAC_REG_EMAC_RX_STAT_AC_28                              0x1f4
5078 #define EMAC_REG_EMAC_RX_STAT_AC_COUNT                           23
5079 #define EMAC_REG_EMAC_TX_MODE                                    0xbc
5080 #define EMAC_REG_EMAC_TX_STAT_AC                                 0x280
5081 #define EMAC_REG_EMAC_TX_STAT_AC_COUNT                           22
5082 #define EMAC_REG_RX_PFC_MODE                                     0x320
5083 #define EMAC_REG_RX_PFC_MODE_PRIORITIES                          (1L<<2)
5084 #define EMAC_REG_RX_PFC_MODE_RX_EN                               (1L<<1)
5085 #define EMAC_REG_RX_PFC_MODE_TX_EN                               (1L<<0)
5086 #define EMAC_REG_RX_PFC_PARAM                                    0x324
5087 #define EMAC_REG_RX_PFC_PARAM_OPCODE_BITSHIFT                    0
5088 #define EMAC_REG_RX_PFC_PARAM_PRIORITY_EN_BITSHIFT               16
5089 #define EMAC_REG_RX_PFC_STATS_XOFF_RCVD                          0x328
5090 #define EMAC_REG_RX_PFC_STATS_XOFF_RCVD_COUNT                    (0xffff<<0)
5091 #define EMAC_REG_RX_PFC_STATS_XOFF_SENT                          0x330
5092 #define EMAC_REG_RX_PFC_STATS_XOFF_SENT_COUNT                    (0xffff<<0)
5093 #define EMAC_REG_RX_PFC_STATS_XON_RCVD                           0x32c
5094 #define EMAC_REG_RX_PFC_STATS_XON_RCVD_COUNT                     (0xffff<<0)
5095 #define EMAC_REG_RX_PFC_STATS_XON_SENT                           0x334
5096 #define EMAC_REG_RX_PFC_STATS_XON_SENT_COUNT                     (0xffff<<0)
5097 #define EMAC_RX_MODE_FLOW_EN                                     (1L<<2)
5098 #define EMAC_RX_MODE_KEEP_MAC_CONTROL                            (1L<<3)
5099 #define EMAC_RX_MODE_KEEP_VLAN_TAG                               (1L<<10)
5100 #define EMAC_RX_MODE_PROMISCUOUS                                 (1L<<8)
5101 #define EMAC_RX_MODE_RESET                                       (1L<<0)
5102 #define EMAC_RX_MTU_SIZE_JUMBO_ENA                               (1L<<31)
5103 #define EMAC_TX_MODE_EXT_PAUSE_EN                                (1L<<3)
5104 #define EMAC_TX_MODE_FLOW_EN                                     (1L<<4)
5105 #define EMAC_TX_MODE_RESET                                       (1L<<0)
5106 #define MISC_REGISTERS_GPIO_0                                    0
5107 #define MISC_REGISTERS_GPIO_1                                    1
5108 #define MISC_REGISTERS_GPIO_2                                    2
5109 #define MISC_REGISTERS_GPIO_3                                    3
5110 #define MISC_REGISTERS_GPIO_CLR_POS                              16
5111 #define MISC_REGISTERS_GPIO_FLOAT                                (0xffL<<24)
5112 #define MISC_REGISTERS_GPIO_FLOAT_POS                            24
5113 #define MISC_REGISTERS_GPIO_HIGH                                 1
5114 #define MISC_REGISTERS_GPIO_INPUT_HI_Z                           2
5115 #define MISC_REGISTERS_GPIO_INT_CLR_POS                          24
5116 #define MISC_REGISTERS_GPIO_INT_OUTPUT_CLR                       0
5117 #define MISC_REGISTERS_GPIO_INT_OUTPUT_SET                       1
5118 #define MISC_REGISTERS_GPIO_INT_SET_POS                          16
5119 #define MISC_REGISTERS_GPIO_LOW                                  0
5120 #define MISC_REGISTERS_GPIO_OUTPUT_HIGH                          1
5121 #define MISC_REGISTERS_GPIO_OUTPUT_LOW                           0
5122 #define MISC_REGISTERS_GPIO_PORT_SHIFT                           4
5123 #define MISC_REGISTERS_GPIO_SET_POS                              8
5124 #define MISC_REGISTERS_RESET_REG_1_CLEAR                         0x588
5125 #define MISC_REGISTERS_RESET_REG_1_RST_HC                        (0x1<<29)
5126 #define MISC_REGISTERS_RESET_REG_1_RST_NIG                       (0x1<<7)
5127 #define MISC_REGISTERS_RESET_REG_1_RST_PXP                       (0x1<<26)
5128 #define MISC_REGISTERS_RESET_REG_1_RST_PXPV                      (0x1<<27)
5129 #define MISC_REGISTERS_RESET_REG_1_SET                           0x584
5130 #define MISC_REGISTERS_RESET_REG_2_CLEAR                         0x598
5131 #define MISC_REGISTERS_RESET_REG_2_RST_BMAC0                     (0x1<<0)
5132 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC0_HARD_CORE           (0x1<<14)
5133 #define MISC_REGISTERS_RESET_REG_2_RST_EMAC1_HARD_CORE           (0x1<<15)
5134 #define MISC_REGISTERS_RESET_REG_2_RST_GRC                       (0x1<<4)
5135 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_HARD_CORE_RST_B     (0x1<<6)
5136 #define MISC_REGISTERS_RESET_REG_2_RST_MCP_N_RESET_REG_HARD_CORE (0x1<<5)
5137 #define MISC_REGISTERS_RESET_REG_2_RST_MDIO                      (0x1<<13)
5138 #define MISC_REGISTERS_RESET_REG_2_RST_MISC_CORE                 (0x1<<11)
5139 #define MISC_REGISTERS_RESET_REG_2_RST_RBCN                      (0x1<<9)
5140 #define MISC_REGISTERS_RESET_REG_2_SET                           0x594
5141 #define MISC_REGISTERS_RESET_REG_3_CLEAR                         0x5a8
5142 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_IDDQ     (0x1<<1)
5143 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN   (0x1<<2)
5144 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_PWRDWN_SD (0x1<<3)
5145 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_SERDES0_RSTB_HW  (0x1<<0)
5146 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_IDDQ       (0x1<<5)
5147 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN     (0x1<<6)
5148 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_PWRDWN_SD  (0x1<<7)
5149 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_RSTB_HW    (0x1<<4)
5150 #define MISC_REGISTERS_RESET_REG_3_MISC_NIG_MUX_XGXS0_TXD_FIFO_RSTB (0x1<<8)
5151 #define MISC_REGISTERS_RESET_REG_3_SET                           0x5a4
5152 #define MISC_REGISTERS_SPIO_4                                    4
5153 #define MISC_REGISTERS_SPIO_5                                    5
5154 #define MISC_REGISTERS_SPIO_7                                    7
5155 #define MISC_REGISTERS_SPIO_CLR_POS                              16
5156 #define MISC_REGISTERS_SPIO_FLOAT                                (0xffL<<24)
5157 #define MISC_REGISTERS_SPIO_FLOAT_POS                            24
5158 #define MISC_REGISTERS_SPIO_INPUT_HI_Z                           2
5159 #define MISC_REGISTERS_SPIO_INT_OLD_SET_POS                      16
5160 #define MISC_REGISTERS_SPIO_OUTPUT_HIGH                          1
5161 #define MISC_REGISTERS_SPIO_OUTPUT_LOW                           0
5162 #define MISC_REGISTERS_SPIO_SET_POS                              8
5163 #define HW_LOCK_MAX_RESOURCE_VALUE                               31
5164 #define HW_LOCK_RESOURCE_GPIO                                    1
5165 #define HW_LOCK_RESOURCE_MDIO                                    0
5166 #define HW_LOCK_RESOURCE_PORT0_ATT_MASK                          3
5167 #define HW_LOCK_RESOURCE_RESERVED_08                             8
5168 #define HW_LOCK_RESOURCE_SPIO                                    2
5169 #define HW_LOCK_RESOURCE_UNDI                                    5
5170 #define PRS_FLAG_OVERETH_IPV4                                    1
5171 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT                 (0x1<<4)
5172 #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR                 (0x1<<5)
5173 #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR                 (1<<18)
5174 #define AEU_INPUTS_ATTN_BITS_CCM_HW_INTERRUPT                 (1<<31)
5175 #define AEU_INPUTS_ATTN_BITS_CDU_HW_INTERRUPT                 (1<<9)
5176 #define AEU_INPUTS_ATTN_BITS_CDU_PARITY_ERROR                 (1<<8)
5177 #define AEU_INPUTS_ATTN_BITS_CFC_HW_INTERRUPT                 (1<<7)
5178 #define AEU_INPUTS_ATTN_BITS_CFC_PARITY_ERROR                 (1<<6)
5179 #define AEU_INPUTS_ATTN_BITS_CSDM_HW_INTERRUPT                (1<<29)
5180 #define AEU_INPUTS_ATTN_BITS_CSDM_PARITY_ERROR                (1<<28)
5181 #define AEU_INPUTS_ATTN_BITS_CSEMI_HW_INTERRUPT               (1<<1)
5182 #define AEU_INPUTS_ATTN_BITS_CSEMI_PARITY_ERROR               (1<<0)
5183 #define AEU_INPUTS_ATTN_BITS_DEBUG_PARITY_ERROR               (1<<18)
5184 #define AEU_INPUTS_ATTN_BITS_DMAE_HW_INTERRUPT                (1<<11)
5185 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_HW_INTERRUPT           (1<<13)
5186 #define AEU_INPUTS_ATTN_BITS_DOORBELLQ_PARITY_ERROR           (1<<12)
5187 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_0                 (1<<5)
5188 #define AEU_INPUTS_ATTN_BITS_GPIO3_FUNCTION_1                 (1<<9)
5189 #define AEU_INPUTS_ATTN_BITS_IGU_PARITY_ERROR                 (1<<12)
5190 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_ROM_PARITY           (1<<28)
5191 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_SCPAD_PARITY         (1<<31)
5192 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_RX_PARITY        (1<<29)
5193 #define AEU_INPUTS_ATTN_BITS_MCP_LATCHED_UMP_TX_PARITY        (1<<30)
5194 #define AEU_INPUTS_ATTN_BITS_MISC_HW_INTERRUPT                (1<<15)
5195 #define AEU_INPUTS_ATTN_BITS_MISC_PARITY_ERROR                (1<<14)
5196 #define AEU_INPUTS_ATTN_BITS_PARSER_PARITY_ERROR              (1<<20)
5197 #define AEU_INPUTS_ATTN_BITS_PBCLIENT_PARITY_ERROR            (1<<0)
5198 #define AEU_INPUTS_ATTN_BITS_PBF_HW_INTERRUPT                 (1<<31)
5199 #define AEU_INPUTS_ATTN_BITS_PGLUE_HW_INTERRUPT       (0x1<<2)
5200 #define AEU_INPUTS_ATTN_BITS_PGLUE_PARITY_ERROR       (0x1<<3)
5201 #define AEU_INPUTS_ATTN_BITS_PXP_HW_INTERRUPT                 (1<<3)
5202 #define AEU_INPUTS_ATTN_BITS_PXP_PARITY_ERROR                 (1<<2)
5203 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_HW_INTERRUPT   (1<<5)
5204 #define AEU_INPUTS_ATTN_BITS_PXPPCICLOCKCLIENT_PARITY_ERROR   (1<<4)
5205 #define AEU_INPUTS_ATTN_BITS_QM_HW_INTERRUPT                  (1<<3)
5206 #define AEU_INPUTS_ATTN_BITS_QM_PARITY_ERROR                  (1<<2)
5207 #define AEU_INPUTS_ATTN_BITS_SEARCHER_PARITY_ERROR            (1<<22)
5208 #define AEU_INPUTS_ATTN_BITS_SPIO5                            (1<<15)
5209 #define AEU_INPUTS_ATTN_BITS_TCM_HW_INTERRUPT                 (1<<27)
5210 #define AEU_INPUTS_ATTN_BITS_TIMERS_HW_INTERRUPT              (1<<5)
5211 #define AEU_INPUTS_ATTN_BITS_TSDM_HW_INTERRUPT                (1<<25)
5212 #define AEU_INPUTS_ATTN_BITS_TSDM_PARITY_ERROR                (1<<24)
5213 #define AEU_INPUTS_ATTN_BITS_TSEMI_HW_INTERRUPT               (1<<29)
5214 #define AEU_INPUTS_ATTN_BITS_TSEMI_PARITY_ERROR               (1<<28)
5215 #define AEU_INPUTS_ATTN_BITS_UCM_HW_INTERRUPT                 (1<<23)
5216 #define AEU_INPUTS_ATTN_BITS_UPB_HW_INTERRUPT                 (1<<27)
5217 #define AEU_INPUTS_ATTN_BITS_UPB_PARITY_ERROR                 (1<<26)
5218 #define AEU_INPUTS_ATTN_BITS_USDM_HW_INTERRUPT                (1<<21)
5219 #define AEU_INPUTS_ATTN_BITS_USDM_PARITY_ERROR                (1<<20)
5220 #define AEU_INPUTS_ATTN_BITS_USEMI_HW_INTERRUPT               (1<<25)
5221 #define AEU_INPUTS_ATTN_BITS_USEMI_PARITY_ERROR               (1<<24)
5222 #define AEU_INPUTS_ATTN_BITS_VAUX_PCI_CORE_PARITY_ERROR       (1<<16)
5223 #define AEU_INPUTS_ATTN_BITS_XCM_HW_INTERRUPT                 (1<<9)
5224 #define AEU_INPUTS_ATTN_BITS_XSDM_HW_INTERRUPT                (1<<7)
5225 #define AEU_INPUTS_ATTN_BITS_XSDM_PARITY_ERROR                (1<<6)
5226 #define AEU_INPUTS_ATTN_BITS_XSEMI_HW_INTERRUPT               (1<<11)
5227 #define AEU_INPUTS_ATTN_BITS_XSEMI_PARITY_ERROR               (1<<10)
5228 #define RESERVED_GENERAL_ATTENTION_BIT_0        0
5229
5230 #define EVEREST_GEN_ATTN_IN_USE_MASK            0x3ffe0
5231 #define EVEREST_LATCHED_ATTN_IN_USE_MASK        0xffe00000
5232
5233 #define RESERVED_GENERAL_ATTENTION_BIT_6        6
5234 #define RESERVED_GENERAL_ATTENTION_BIT_7        7
5235 #define RESERVED_GENERAL_ATTENTION_BIT_8        8
5236 #define RESERVED_GENERAL_ATTENTION_BIT_9        9
5237 #define RESERVED_GENERAL_ATTENTION_BIT_10       10
5238 #define RESERVED_GENERAL_ATTENTION_BIT_11       11
5239 #define RESERVED_GENERAL_ATTENTION_BIT_12       12
5240 #define RESERVED_GENERAL_ATTENTION_BIT_13       13
5241 #define RESERVED_GENERAL_ATTENTION_BIT_14       14
5242 #define RESERVED_GENERAL_ATTENTION_BIT_15       15
5243 #define RESERVED_GENERAL_ATTENTION_BIT_16       16
5244 #define RESERVED_GENERAL_ATTENTION_BIT_17       17
5245 #define RESERVED_GENERAL_ATTENTION_BIT_18       18
5246 #define RESERVED_GENERAL_ATTENTION_BIT_19       19
5247 #define RESERVED_GENERAL_ATTENTION_BIT_20       20
5248 #define RESERVED_GENERAL_ATTENTION_BIT_21       21
5249
5250 /* storm asserts attention bits */
5251 #define TSTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_7
5252 #define USTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_8
5253 #define CSTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_9
5254 #define XSTORM_FATAL_ASSERT_ATTENTION_BIT     RESERVED_GENERAL_ATTENTION_BIT_10
5255
5256 /* mcp error attention bit */
5257 #define MCP_FATAL_ASSERT_ATTENTION_BIT        RESERVED_GENERAL_ATTENTION_BIT_11
5258
5259 /*E1H NIG status sync attention mapped to group 4-7*/
5260 #define LINK_SYNC_ATTENTION_BIT_FUNC_0      RESERVED_GENERAL_ATTENTION_BIT_12
5261 #define LINK_SYNC_ATTENTION_BIT_FUNC_1      RESERVED_GENERAL_ATTENTION_BIT_13
5262 #define LINK_SYNC_ATTENTION_BIT_FUNC_2      RESERVED_GENERAL_ATTENTION_BIT_14
5263 #define LINK_SYNC_ATTENTION_BIT_FUNC_3      RESERVED_GENERAL_ATTENTION_BIT_15
5264 #define LINK_SYNC_ATTENTION_BIT_FUNC_4      RESERVED_GENERAL_ATTENTION_BIT_16
5265 #define LINK_SYNC_ATTENTION_BIT_FUNC_5      RESERVED_GENERAL_ATTENTION_BIT_17
5266 #define LINK_SYNC_ATTENTION_BIT_FUNC_6      RESERVED_GENERAL_ATTENTION_BIT_18
5267 #define LINK_SYNC_ATTENTION_BIT_FUNC_7      RESERVED_GENERAL_ATTENTION_BIT_19
5268
5269
5270 #define LATCHED_ATTN_RBCR                       23
5271 #define LATCHED_ATTN_RBCT                       24
5272 #define LATCHED_ATTN_RBCN                       25
5273 #define LATCHED_ATTN_RBCU                       26
5274 #define LATCHED_ATTN_RBCP                       27
5275 #define LATCHED_ATTN_TIMEOUT_GRC                28
5276 #define LATCHED_ATTN_RSVD_GRC                   29
5277 #define LATCHED_ATTN_ROM_PARITY_MCP             30
5278 #define LATCHED_ATTN_UM_RX_PARITY_MCP           31
5279 #define LATCHED_ATTN_UM_TX_PARITY_MCP           32
5280 #define LATCHED_ATTN_SCPAD_PARITY_MCP           33
5281
5282 #define GENERAL_ATTEN_WORD(atten_name)         ((94 + atten_name) / 32)
5283 #define GENERAL_ATTEN_OFFSET(atten_name)\
5284         (1UL << ((94 + atten_name) % 32))
5285 /*
5286  * This file defines GRC base address for every block.
5287  * This file is included by chipsim, asm microcode and cpp microcode.
5288  * These values are used in Design.xml on regBase attribute
5289  * Use the base with the generated offsets of specific registers.
5290  */
5291
5292 #define GRCBASE_PXPCS           0x000000
5293 #define GRCBASE_PCICONFIG       0x002000
5294 #define GRCBASE_PCIREG          0x002400
5295 #define GRCBASE_EMAC0           0x008000
5296 #define GRCBASE_EMAC1           0x008400
5297 #define GRCBASE_DBU             0x008800
5298 #define GRCBASE_MISC            0x00A000
5299 #define GRCBASE_DBG             0x00C000
5300 #define GRCBASE_NIG             0x010000
5301 #define GRCBASE_XCM             0x020000
5302 #define GRCBASE_PRS             0x040000
5303 #define GRCBASE_SRCH            0x040400
5304 #define GRCBASE_TSDM            0x042000
5305 #define GRCBASE_TCM             0x050000
5306 #define GRCBASE_BRB1            0x060000
5307 #define GRCBASE_MCP             0x080000
5308 #define GRCBASE_UPB             0x0C1000
5309 #define GRCBASE_CSDM            0x0C2000
5310 #define GRCBASE_USDM            0x0C4000
5311 #define GRCBASE_CCM             0x0D0000
5312 #define GRCBASE_UCM             0x0E0000
5313 #define GRCBASE_CDU             0x101000
5314 #define GRCBASE_DMAE            0x102000
5315 #define GRCBASE_PXP             0x103000
5316 #define GRCBASE_CFC             0x104000
5317 #define GRCBASE_HC              0x108000
5318 #define GRCBASE_PXP2            0x120000
5319 #define GRCBASE_PBF             0x140000
5320 #define GRCBASE_XPB             0x161000
5321 #define GRCBASE_TIMERS          0x164000
5322 #define GRCBASE_XSDM            0x166000
5323 #define GRCBASE_QM              0x168000
5324 #define GRCBASE_DQ              0x170000
5325 #define GRCBASE_TSEM            0x180000
5326 #define GRCBASE_CSEM            0x200000
5327 #define GRCBASE_XSEM            0x280000
5328 #define GRCBASE_USEM            0x300000
5329 #define GRCBASE_MISC_AEU        GRCBASE_MISC
5330
5331
5332 /* offset of configuration space in the pci core register */
5333 #define PCICFG_OFFSET                                   0x2000
5334 #define PCICFG_VENDOR_ID_OFFSET                         0x00
5335 #define PCICFG_DEVICE_ID_OFFSET                         0x02
5336 #define PCICFG_COMMAND_OFFSET                           0x04
5337 #define PCICFG_COMMAND_IO_SPACE                 (1<<0)
5338 #define PCICFG_COMMAND_MEM_SPACE                (1<<1)
5339 #define PCICFG_COMMAND_BUS_MASTER               (1<<2)
5340 #define PCICFG_COMMAND_SPECIAL_CYCLES           (1<<3)
5341 #define PCICFG_COMMAND_MWI_CYCLES               (1<<4)
5342 #define PCICFG_COMMAND_VGA_SNOOP                (1<<5)
5343 #define PCICFG_COMMAND_PERR_ENA                 (1<<6)
5344 #define PCICFG_COMMAND_STEPPING                 (1<<7)
5345 #define PCICFG_COMMAND_SERR_ENA                 (1<<8)
5346 #define PCICFG_COMMAND_FAST_B2B                 (1<<9)
5347 #define PCICFG_COMMAND_INT_DISABLE              (1<<10)
5348 #define PCICFG_COMMAND_RESERVED                 (0x1f<<11)
5349 #define PCICFG_STATUS_OFFSET                            0x06
5350 #define PCICFG_REVESION_ID_OFFSET                       0x08
5351 #define PCICFG_CACHE_LINE_SIZE                          0x0c
5352 #define PCICFG_LATENCY_TIMER                            0x0d
5353 #define PCICFG_BAR_1_LOW                                0x10
5354 #define PCICFG_BAR_1_HIGH                               0x14
5355 #define PCICFG_BAR_2_LOW                                0x18
5356 #define PCICFG_BAR_2_HIGH                               0x1c
5357 #define PCICFG_SUBSYSTEM_VENDOR_ID_OFFSET               0x2c
5358 #define PCICFG_SUBSYSTEM_ID_OFFSET                      0x2e
5359 #define PCICFG_INT_LINE                                 0x3c
5360 #define PCICFG_INT_PIN                                  0x3d
5361 #define PCICFG_PM_CAPABILITY                            0x48
5362 #define PCICFG_PM_CAPABILITY_VERSION            (0x3<<16)
5363 #define PCICFG_PM_CAPABILITY_CLOCK              (1<<19)
5364 #define PCICFG_PM_CAPABILITY_RESERVED           (1<<20)
5365 #define PCICFG_PM_CAPABILITY_DSI                (1<<21)
5366 #define PCICFG_PM_CAPABILITY_AUX_CURRENT        (0x7<<22)
5367 #define PCICFG_PM_CAPABILITY_D1_SUPPORT         (1<<25)
5368 #define PCICFG_PM_CAPABILITY_D2_SUPPORT         (1<<26)
5369 #define PCICFG_PM_CAPABILITY_PME_IN_D0          (1<<27)
5370 #define PCICFG_PM_CAPABILITY_PME_IN_D1          (1<<28)
5371 #define PCICFG_PM_CAPABILITY_PME_IN_D2          (1<<29)
5372 #define PCICFG_PM_CAPABILITY_PME_IN_D3_HOT      (1<<30)
5373 #define PCICFG_PM_CAPABILITY_PME_IN_D3_COLD     (1<<31)
5374 #define PCICFG_PM_CSR_OFFSET                            0x4c
5375 #define PCICFG_PM_CSR_STATE                     (0x3<<0)
5376 #define PCICFG_PM_CSR_PME_ENABLE                (1<<8)
5377 #define PCICFG_PM_CSR_PME_STATUS                (1<<15)
5378 #define PCICFG_MSI_CAP_ID_OFFSET                        0x58
5379 #define PCICFG_MSI_CONTROL_ENABLE               (0x1<<16)
5380 #define PCICFG_MSI_CONTROL_MCAP                 (0x7<<17)
5381 #define PCICFG_MSI_CONTROL_MENA                 (0x7<<20)
5382 #define PCICFG_MSI_CONTROL_64_BIT_ADDR_CAP      (0x1<<23)
5383 #define PCICFG_MSI_CONTROL_MSI_PVMASK_CAPABLE   (0x1<<24)
5384 #define PCICFG_GRC_ADDRESS                              0x78
5385 #define PCICFG_GRC_DATA                                 0x80
5386 #define PCICFG_MSIX_CAP_ID_OFFSET                       0xa0
5387 #define PCICFG_MSIX_CONTROL_TABLE_SIZE          (0x7ff<<16)
5388 #define PCICFG_MSIX_CONTROL_RESERVED            (0x7<<27)
5389 #define PCICFG_MSIX_CONTROL_FUNC_MASK           (0x1<<30)
5390 #define PCICFG_MSIX_CONTROL_MSIX_ENABLE         (0x1<<31)
5391
5392 #define PCICFG_DEVICE_CONTROL                           0xb4
5393 #define PCICFG_DEVICE_STATUS                            0xb6
5394 #define PCICFG_DEVICE_STATUS_CORR_ERR_DET       (1<<0)
5395 #define PCICFG_DEVICE_STATUS_NON_FATAL_ERR_DET  (1<<1)
5396 #define PCICFG_DEVICE_STATUS_FATAL_ERR_DET      (1<<2)
5397 #define PCICFG_DEVICE_STATUS_UNSUP_REQ_DET      (1<<3)
5398 #define PCICFG_DEVICE_STATUS_AUX_PWR_DET        (1<<4)
5399 #define PCICFG_DEVICE_STATUS_NO_PEND            (1<<5)
5400 #define PCICFG_LINK_CONTROL                             0xbc
5401
5402
5403 #define BAR_USTRORM_INTMEM                              0x400000
5404 #define BAR_CSTRORM_INTMEM                              0x410000
5405 #define BAR_XSTRORM_INTMEM                              0x420000
5406 #define BAR_TSTRORM_INTMEM                              0x430000
5407
5408 /* for accessing the IGU in case of status block ACK */
5409 #define BAR_IGU_INTMEM                                  0x440000
5410
5411 #define BAR_DOORBELL_OFFSET                             0x800000
5412
5413 #define BAR_ME_REGISTER                                 0x450000
5414
5415 /* config_2 offset */
5416 #define GRC_CONFIG_2_SIZE_REG                           0x408
5417 #define PCI_CONFIG_2_BAR1_SIZE                  (0xfL<<0)
5418 #define PCI_CONFIG_2_BAR1_SIZE_DISABLED         (0L<<0)
5419 #define PCI_CONFIG_2_BAR1_SIZE_64K              (1L<<0)
5420 #define PCI_CONFIG_2_BAR1_SIZE_128K             (2L<<0)
5421 #define PCI_CONFIG_2_BAR1_SIZE_256K             (3L<<0)
5422 #define PCI_CONFIG_2_BAR1_SIZE_512K             (4L<<0)
5423 #define PCI_CONFIG_2_BAR1_SIZE_1M               (5L<<0)
5424 #define PCI_CONFIG_2_BAR1_SIZE_2M               (6L<<0)
5425 #define PCI_CONFIG_2_BAR1_SIZE_4M               (7L<<0)
5426 #define PCI_CONFIG_2_BAR1_SIZE_8M               (8L<<0)
5427 #define PCI_CONFIG_2_BAR1_SIZE_16M              (9L<<0)
5428 #define PCI_CONFIG_2_BAR1_SIZE_32M              (10L<<0)
5429 #define PCI_CONFIG_2_BAR1_SIZE_64M              (11L<<0)
5430 #define PCI_CONFIG_2_BAR1_SIZE_128M             (12L<<0)
5431 #define PCI_CONFIG_2_BAR1_SIZE_256M             (13L<<0)
5432 #define PCI_CONFIG_2_BAR1_SIZE_512M             (14L<<0)
5433 #define PCI_CONFIG_2_BAR1_SIZE_1G               (15L<<0)
5434 #define PCI_CONFIG_2_BAR1_64ENA                 (1L<<4)
5435 #define PCI_CONFIG_2_EXP_ROM_RETRY              (1L<<5)
5436 #define PCI_CONFIG_2_CFG_CYCLE_RETRY            (1L<<6)
5437 #define PCI_CONFIG_2_FIRST_CFG_DONE             (1L<<7)
5438 #define PCI_CONFIG_2_EXP_ROM_SIZE               (0xffL<<8)
5439 #define PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED      (0L<<8)
5440 #define PCI_CONFIG_2_EXP_ROM_SIZE_2K            (1L<<8)
5441 #define PCI_CONFIG_2_EXP_ROM_SIZE_4K            (2L<<8)
5442 #define PCI_CONFIG_2_EXP_ROM_SIZE_8K            (3L<<8)
5443 #define PCI_CONFIG_2_EXP_ROM_SIZE_16K           (4L<<8)
5444 #define PCI_CONFIG_2_EXP_ROM_SIZE_32K           (5L<<8)
5445 #define PCI_CONFIG_2_EXP_ROM_SIZE_64K           (6L<<8)
5446 #define PCI_CONFIG_2_EXP_ROM_SIZE_128K          (7L<<8)
5447 #define PCI_CONFIG_2_EXP_ROM_SIZE_256K          (8L<<8)
5448 #define PCI_CONFIG_2_EXP_ROM_SIZE_512K          (9L<<8)
5449 #define PCI_CONFIG_2_EXP_ROM_SIZE_1M            (10L<<8)
5450 #define PCI_CONFIG_2_EXP_ROM_SIZE_2M            (11L<<8)
5451 #define PCI_CONFIG_2_EXP_ROM_SIZE_4M            (12L<<8)
5452 #define PCI_CONFIG_2_EXP_ROM_SIZE_8M            (13L<<8)
5453 #define PCI_CONFIG_2_EXP_ROM_SIZE_16M           (14L<<8)
5454 #define PCI_CONFIG_2_EXP_ROM_SIZE_32M           (15L<<8)
5455 #define PCI_CONFIG_2_BAR_PREFETCH               (1L<<16)
5456 #define PCI_CONFIG_2_RESERVED0                  (0x7fffL<<17)
5457
5458 /* config_3 offset */
5459 #define GRC_CONFIG_3_SIZE_REG                           0x40c
5460 #define PCI_CONFIG_3_STICKY_BYTE                (0xffL<<0)
5461 #define PCI_CONFIG_3_FORCE_PME                  (1L<<24)
5462 #define PCI_CONFIG_3_PME_STATUS                 (1L<<25)
5463 #define PCI_CONFIG_3_PME_ENABLE                 (1L<<26)
5464 #define PCI_CONFIG_3_PM_STATE                   (0x3L<<27)
5465 #define PCI_CONFIG_3_VAUX_PRESET                (1L<<30)
5466 #define PCI_CONFIG_3_PCI_POWER                  (1L<<31)
5467
5468 #define GRC_BAR2_CONFIG                                 0x4e0
5469 #define PCI_CONFIG_2_BAR2_SIZE                  (0xfL<<0)
5470 #define PCI_CONFIG_2_BAR2_SIZE_DISABLED         (0L<<0)
5471 #define PCI_CONFIG_2_BAR2_SIZE_64K              (1L<<0)
5472 #define PCI_CONFIG_2_BAR2_SIZE_128K             (2L<<0)
5473 #define PCI_CONFIG_2_BAR2_SIZE_256K             (3L<<0)
5474 #define PCI_CONFIG_2_BAR2_SIZE_512K             (4L<<0)
5475 #define PCI_CONFIG_2_BAR2_SIZE_1M               (5L<<0)
5476 #define PCI_CONFIG_2_BAR2_SIZE_2M               (6L<<0)
5477 #define PCI_CONFIG_2_BAR2_SIZE_4M               (7L<<0)
5478 #define PCI_CONFIG_2_BAR2_SIZE_8M               (8L<<0)
5479 #define PCI_CONFIG_2_BAR2_SIZE_16M              (9L<<0)
5480 #define PCI_CONFIG_2_BAR2_SIZE_32M              (10L<<0)
5481 #define PCI_CONFIG_2_BAR2_SIZE_64M              (11L<<0)
5482 #define PCI_CONFIG_2_BAR2_SIZE_128M             (12L<<0)
5483 #define PCI_CONFIG_2_BAR2_SIZE_256M             (13L<<0)
5484 #define PCI_CONFIG_2_BAR2_SIZE_512M             (14L<<0)
5485 #define PCI_CONFIG_2_BAR2_SIZE_1G               (15L<<0)
5486 #define PCI_CONFIG_2_BAR2_64ENA                 (1L<<4)
5487
5488 #define PCI_PM_DATA_A                                   0x410
5489 #define PCI_PM_DATA_B                                   0x414
5490 #define PCI_ID_VAL1                                     0x434
5491 #define PCI_ID_VAL2                                     0x438
5492
5493 #define PXPCS_TL_CONTROL_5                  0x814
5494 #define PXPCS_TL_CONTROL_5_UNKNOWNTYPE_ERR_ATTN    (1 << 29) /*WC*/
5495 #define PXPCS_TL_CONTROL_5_BOUNDARY4K_ERR_ATTN     (1 << 28)   /*WC*/
5496 #define PXPCS_TL_CONTROL_5_MRRS_ERR_ATTN   (1 << 27)   /*WC*/
5497 #define PXPCS_TL_CONTROL_5_MPS_ERR_ATTN    (1 << 26)   /*WC*/
5498 #define PXPCS_TL_CONTROL_5_TTX_BRIDGE_FORWARD_ERR  (1 << 25)   /*WC*/
5499 #define PXPCS_TL_CONTROL_5_TTX_TXINTF_OVERFLOW     (1 << 24)   /*WC*/
5500 #define PXPCS_TL_CONTROL_5_PHY_ERR_ATTN    (1 << 23)   /*RO*/
5501 #define PXPCS_TL_CONTROL_5_DL_ERR_ATTN     (1 << 22)   /*RO*/
5502 #define PXPCS_TL_CONTROL_5_TTX_ERR_NP_TAG_IN_USE   (1 << 21)   /*WC*/
5503 #define PXPCS_TL_CONTROL_5_TRX_ERR_UNEXP_RTAG  (1 << 20)   /*WC*/
5504 #define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT1   (1 << 19)   /*WC*/
5505 #define PXPCS_TL_CONTROL_5_ERR_UNSPPORT1   (1 << 18)   /*WC*/
5506 #define PXPCS_TL_CONTROL_5_ERR_ECRC1   (1 << 17)   /*WC*/
5507 #define PXPCS_TL_CONTROL_5_ERR_MALF_TLP1   (1 << 16)   /*WC*/
5508 #define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW1   (1 << 15)   /*WC*/
5509 #define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL1  (1 << 14)   /*WC*/
5510 #define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT1    (1 << 13)   /*WC*/
5511 #define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT1    (1 << 12)   /*WC*/
5512 #define PXPCS_TL_CONTROL_5_ERR_FC_PRTL1    (1 << 11)   /*WC*/
5513 #define PXPCS_TL_CONTROL_5_ERR_PSND_TLP1   (1 << 10)   /*WC*/
5514 #define PXPCS_TL_CONTROL_5_PRI_SIG_TARGET_ABORT    (1 << 9)    /*WC*/
5515 #define PXPCS_TL_CONTROL_5_ERR_UNSPPORT    (1 << 8)    /*WC*/
5516 #define PXPCS_TL_CONTROL_5_ERR_ECRC    (1 << 7)    /*WC*/
5517 #define PXPCS_TL_CONTROL_5_ERR_MALF_TLP    (1 << 6)    /*WC*/
5518 #define PXPCS_TL_CONTROL_5_ERR_RX_OFLOW    (1 << 5)    /*WC*/
5519 #define PXPCS_TL_CONTROL_5_ERR_UNEXP_CPL   (1 << 4)    /*WC*/
5520 #define PXPCS_TL_CONTROL_5_ERR_MASTER_ABRT     (1 << 3)    /*WC*/
5521 #define PXPCS_TL_CONTROL_5_ERR_CPL_TIMEOUT     (1 << 2)    /*WC*/
5522 #define PXPCS_TL_CONTROL_5_ERR_FC_PRTL     (1 << 1)    /*WC*/
5523 #define PXPCS_TL_CONTROL_5_ERR_PSND_TLP    (1 << 0)    /*WC*/
5524
5525
5526 #define PXPCS_TL_FUNC345_STAT      0x854
5527 #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT4    (1 << 29)   /* WC */
5528 #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT4\
5529         (1 << 28) /* Unsupported Request Error Status in function4, if \
5530         set, generate pcie_err_attn output when this error is seen. WC */
5531 #define PXPCS_TL_FUNC345_STAT_ERR_ECRC4\
5532         (1 << 27) /* ECRC Error TLP Status Status in function 4, if set, \
5533         generate pcie_err_attn output when this error is seen.. WC */
5534 #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP4\
5535         (1 << 26) /* Malformed TLP Status Status in function 4, if set, \
5536         generate pcie_err_attn output when this error is seen.. WC */
5537 #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW4\
5538         (1 << 25) /* Receiver Overflow Status Status in function 4, if \
5539         set, generate pcie_err_attn output when this error is seen.. WC \
5540         */
5541 #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL4\
5542         (1 << 24) /* Unexpected Completion Status Status in function 4, \
5543         if set, generate pcie_err_attn output when this error is seen. WC \
5544         */
5545 #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT4\
5546         (1 << 23) /* Receive UR Statusin function 4. If set, generate \
5547         pcie_err_attn output when this error is seen. WC */
5548 #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT4\
5549         (1 << 22) /* Completer Timeout Status Status in function 4, if \
5550         set, generate pcie_err_attn output when this error is seen. WC */
5551 #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL4\
5552         (1 << 21) /* Flow Control Protocol Error Status Status in \
5553         function 4, if set, generate pcie_err_attn output when this error \
5554         is seen. WC */
5555 #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP4\
5556         (1 << 20) /* Poisoned Error Status Status in function 4, if set, \
5557         generate pcie_err_attn output when this error is seen.. WC */
5558 #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT3    (1 << 19)   /* WC */
5559 #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT3\
5560         (1 << 18) /* Unsupported Request Error Status in function3, if \
5561         set, generate pcie_err_attn output when this error is seen. WC */
5562 #define PXPCS_TL_FUNC345_STAT_ERR_ECRC3\
5563         (1 << 17) /* ECRC Error TLP Status Status in function 3, if set, \
5564         generate pcie_err_attn output when this error is seen.. WC */
5565 #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP3\
5566         (1 << 16) /* Malformed TLP Status Status in function 3, if set, \
5567         generate pcie_err_attn output when this error is seen.. WC */
5568 #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW3\
5569         (1 << 15) /* Receiver Overflow Status Status in function 3, if \
5570         set, generate pcie_err_attn output when this error is seen.. WC \
5571         */
5572 #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL3\
5573         (1 << 14) /* Unexpected Completion Status Status in function 3, \
5574         if set, generate pcie_err_attn output when this error is seen. WC \
5575         */
5576 #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT3\
5577         (1 << 13) /* Receive UR Statusin function 3. If set, generate \
5578         pcie_err_attn output when this error is seen. WC */
5579 #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT3\
5580         (1 << 12) /* Completer Timeout Status Status in function 3, if \
5581         set, generate pcie_err_attn output when this error is seen. WC */
5582 #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL3\
5583         (1 << 11) /* Flow Control Protocol Error Status Status in \
5584         function 3, if set, generate pcie_err_attn output when this error \
5585         is seen. WC */
5586 #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP3\
5587         (1 << 10) /* Poisoned Error Status Status in function 3, if set, \
5588         generate pcie_err_attn output when this error is seen.. WC */
5589 #define PXPCS_TL_FUNC345_STAT_PRI_SIG_TARGET_ABORT2    (1 << 9)    /* WC */
5590 #define PXPCS_TL_FUNC345_STAT_ERR_UNSPPORT2\
5591         (1 << 8) /* Unsupported Request Error Status for Function 2, if \
5592         set, generate pcie_err_attn output when this error is seen. WC */
5593 #define PXPCS_TL_FUNC345_STAT_ERR_ECRC2\
5594         (1 << 7) /* ECRC Error TLP Status Status for Function 2, if set, \
5595         generate pcie_err_attn output when this error is seen.. WC */
5596 #define PXPCS_TL_FUNC345_STAT_ERR_MALF_TLP2\
5597         (1 << 6) /* Malformed TLP Status Status for Function 2, if set, \
5598         generate pcie_err_attn output when this error is seen.. WC */
5599 #define PXPCS_TL_FUNC345_STAT_ERR_RX_OFLOW2\
5600         (1 << 5) /* Receiver Overflow Status Status for Function 2, if \
5601         set, generate pcie_err_attn output when this error is seen.. WC \
5602         */
5603 #define PXPCS_TL_FUNC345_STAT_ERR_UNEXP_CPL2\
5604         (1 << 4) /* Unexpected Completion Status Status for Function 2, \
5605         if set, generate pcie_err_attn output when this error is seen. WC \
5606         */
5607 #define PXPCS_TL_FUNC345_STAT_ERR_MASTER_ABRT2\
5608         (1 << 3) /* Receive UR Statusfor Function 2. If set, generate \
5609         pcie_err_attn output when this error is seen. WC */
5610 #define PXPCS_TL_FUNC345_STAT_ERR_CPL_TIMEOUT2\
5611         (1 << 2) /* Completer Timeout Status Status for Function 2, if \
5612         set, generate pcie_err_attn output when this error is seen. WC */
5613 #define PXPCS_TL_FUNC345_STAT_ERR_FC_PRTL2\
5614         (1 << 1) /* Flow Control Protocol Error Status Status for \
5615         Function 2, if set, generate pcie_err_attn output when this error \
5616         is seen. WC */
5617 #define PXPCS_TL_FUNC345_STAT_ERR_PSND_TLP2\
5618         (1 << 0) /* Poisoned Error Status Status for Function 2, if set, \
5619         generate pcie_err_attn output when this error is seen.. WC */
5620
5621
5622 #define PXPCS_TL_FUNC678_STAT  0x85C
5623 #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT7    (1 << 29)   /*    WC */
5624 #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT7\
5625         (1 << 28) /* Unsupported Request Error Status in function7, if \
5626         set, generate pcie_err_attn output when this error is seen. WC */
5627 #define PXPCS_TL_FUNC678_STAT_ERR_ECRC7\
5628         (1 << 27) /* ECRC Error TLP Status Status in function 7, if set, \
5629         generate pcie_err_attn output when this error is seen.. WC */
5630 #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP7\
5631         (1 << 26) /* Malformed TLP Status Status in function 7, if set, \
5632         generate pcie_err_attn output when this error is seen.. WC */
5633 #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW7\
5634         (1 << 25) /* Receiver Overflow Status Status in function 7, if \
5635         set, generate pcie_err_attn output when this error is seen.. WC \
5636         */
5637 #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL7\
5638         (1 << 24) /* Unexpected Completion Status Status in function 7, \
5639         if set, generate pcie_err_attn output when this error is seen. WC \
5640         */
5641 #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT7\
5642         (1 << 23) /* Receive UR Statusin function 7. If set, generate \
5643         pcie_err_attn output when this error is seen. WC */
5644 #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT7\
5645         (1 << 22) /* Completer Timeout Status Status in function 7, if \
5646         set, generate pcie_err_attn output when this error is seen. WC */
5647 #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL7\
5648         (1 << 21) /* Flow Control Protocol Error Status Status in \
5649         function 7, if set, generate pcie_err_attn output when this error \
5650         is seen. WC */
5651 #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP7\
5652         (1 << 20) /* Poisoned Error Status Status in function 7, if set, \
5653         generate pcie_err_attn output when this error is seen.. WC */
5654 #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT6    (1 << 19)    /*    WC */
5655 #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT6\
5656         (1 << 18) /* Unsupported Request Error Status in function6, if \
5657         set, generate pcie_err_attn output when this error is seen. WC */
5658 #define PXPCS_TL_FUNC678_STAT_ERR_ECRC6\
5659         (1 << 17) /* ECRC Error TLP Status Status in function 6, if set, \
5660         generate pcie_err_attn output when this error is seen.. WC */
5661 #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP6\
5662         (1 << 16) /* Malformed TLP Status Status in function 6, if set, \
5663         generate pcie_err_attn output when this error is seen.. WC */
5664 #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW6\
5665         (1 << 15) /* Receiver Overflow Status Status in function 6, if \
5666         set, generate pcie_err_attn output when this error is seen.. WC \
5667         */
5668 #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL6\
5669         (1 << 14) /* Unexpected Completion Status Status in function 6, \
5670         if set, generate pcie_err_attn output when this error is seen. WC \
5671         */
5672 #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT6\
5673         (1 << 13) /* Receive UR Statusin function 6. If set, generate \
5674         pcie_err_attn output when this error is seen. WC */
5675 #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT6\
5676         (1 << 12) /* Completer Timeout Status Status in function 6, if \
5677         set, generate pcie_err_attn output when this error is seen. WC */
5678 #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL6\
5679         (1 << 11) /* Flow Control Protocol Error Status Status in \
5680         function 6, if set, generate pcie_err_attn output when this error \
5681         is seen. WC */
5682 #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP6\
5683         (1 << 10) /* Poisoned Error Status Status in function 6, if set, \
5684         generate pcie_err_attn output when this error is seen.. WC */
5685 #define PXPCS_TL_FUNC678_STAT_PRI_SIG_TARGET_ABORT5    (1 << 9) /*    WC */
5686 #define PXPCS_TL_FUNC678_STAT_ERR_UNSPPORT5\
5687         (1 << 8) /* Unsupported Request Error Status for Function 5, if \
5688         set, generate pcie_err_attn output when this error is seen. WC */
5689 #define PXPCS_TL_FUNC678_STAT_ERR_ECRC5\
5690         (1 << 7) /* ECRC Error TLP Status Status for Function 5, if set, \
5691         generate pcie_err_attn output when this error is seen.. WC */
5692 #define PXPCS_TL_FUNC678_STAT_ERR_MALF_TLP5\
5693         (1 << 6) /* Malformed TLP Status Status for Function 5, if set, \
5694         generate pcie_err_attn output when this error is seen.. WC */
5695 #define PXPCS_TL_FUNC678_STAT_ERR_RX_OFLOW5\
5696         (1 << 5) /* Receiver Overflow Status Status for Function 5, if \
5697         set, generate pcie_err_attn output when this error is seen.. WC \
5698         */
5699 #define PXPCS_TL_FUNC678_STAT_ERR_UNEXP_CPL5\
5700         (1 << 4) /* Unexpected Completion Status Status for Function 5, \
5701         if set, generate pcie_err_attn output when this error is seen. WC \
5702         */
5703 #define PXPCS_TL_FUNC678_STAT_ERR_MASTER_ABRT5\
5704         (1 << 3) /* Receive UR Statusfor Function 5. If set, generate \
5705         pcie_err_attn output when this error is seen. WC */
5706 #define PXPCS_TL_FUNC678_STAT_ERR_CPL_TIMEOUT5\
5707         (1 << 2) /* Completer Timeout Status Status for Function 5, if \
5708         set, generate pcie_err_attn output when this error is seen. WC */
5709 #define PXPCS_TL_FUNC678_STAT_ERR_FC_PRTL5\
5710         (1 << 1) /* Flow Control Protocol Error Status Status for \
5711         Function 5, if set, generate pcie_err_attn output when this error \
5712         is seen. WC */
5713 #define PXPCS_TL_FUNC678_STAT_ERR_PSND_TLP5\
5714         (1 << 0) /* Poisoned Error Status Status for Function 5, if set, \
5715         generate pcie_err_attn output when this error is seen.. WC */
5716
5717
5718 #define BAR_USTRORM_INTMEM                              0x400000
5719 #define BAR_CSTRORM_INTMEM                              0x410000
5720 #define BAR_XSTRORM_INTMEM                              0x420000
5721 #define BAR_TSTRORM_INTMEM                              0x430000
5722
5723 /* for accessing the IGU in case of status block ACK */
5724 #define BAR_IGU_INTMEM                                  0x440000
5725
5726 #define BAR_DOORBELL_OFFSET                             0x800000
5727
5728 #define BAR_ME_REGISTER                         0x450000
5729 #define ME_REG_PF_NUM_SHIFT             0
5730 #define ME_REG_PF_NUM\
5731         (7L<<ME_REG_PF_NUM_SHIFT) /* Relative PF Num */
5732 #define ME_REG_VF_VALID         (1<<8)
5733 #define ME_REG_VF_NUM_SHIFT             9
5734 #define ME_REG_VF_NUM_MASK              (0x3f<<ME_REG_VF_NUM_SHIFT)
5735 #define ME_REG_VF_ERR                   (0x1<<3)
5736 #define ME_REG_ABS_PF_NUM_SHIFT 16
5737 #define ME_REG_ABS_PF_NUM\
5738         (7L<<ME_REG_ABS_PF_NUM_SHIFT) /* Absolute PF Num */
5739
5740
5741 #define MDIO_REG_BANK_CL73_IEEEB0       0x0
5742 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL        0x0
5743 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_RESTART_AN     0x0200
5744 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_AN_EN          0x1000
5745 #define MDIO_CL73_IEEEB0_CL73_AN_CONTROL_MAIN_RST       0x8000
5746
5747 #define MDIO_REG_BANK_CL73_IEEEB1       0x10
5748 #define MDIO_CL73_IEEEB1_AN_ADV1                0x00
5749 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE                  0x0400
5750 #define MDIO_CL73_IEEEB1_AN_ADV1_ASYMMETRIC             0x0800
5751 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_BOTH             0x0C00
5752 #define MDIO_CL73_IEEEB1_AN_ADV1_PAUSE_MASK             0x0C00
5753 #define MDIO_CL73_IEEEB1_AN_ADV2                0x01
5754 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M             0x0000
5755 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_1000M_KX          0x0020
5756 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KX4           0x0040
5757 #define MDIO_CL73_IEEEB1_AN_ADV2_ADVR_10G_KR            0x0080
5758 #define MDIO_CL73_IEEEB1_AN_LP_ADV1             0x03
5759 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE               0x0400
5760 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_ASYMMETRIC          0x0800
5761 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_BOTH          0x0C00
5762 #define MDIO_CL73_IEEEB1_AN_LP_ADV1_PAUSE_MASK          0x0C00
5763
5764 #define MDIO_REG_BANK_RX0                               0x80b0
5765 #define MDIO_RX0_RX_STATUS                              0x10
5766 #define MDIO_RX0_RX_STATUS_SIGDET                       0x8000
5767 #define MDIO_RX0_RX_STATUS_RX_SEQ_DONE                  0x1000
5768 #define MDIO_RX0_RX_EQ_BOOST                            0x1c
5769 #define MDIO_RX0_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
5770 #define MDIO_RX0_RX_EQ_BOOST_OFFSET_CTRL                0x10
5771
5772 #define MDIO_REG_BANK_RX1                               0x80c0
5773 #define MDIO_RX1_RX_EQ_BOOST                            0x1c
5774 #define MDIO_RX1_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
5775 #define MDIO_RX1_RX_EQ_BOOST_OFFSET_CTRL                0x10
5776
5777 #define MDIO_REG_BANK_RX2                               0x80d0
5778 #define MDIO_RX2_RX_EQ_BOOST                            0x1c
5779 #define MDIO_RX2_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
5780 #define MDIO_RX2_RX_EQ_BOOST_OFFSET_CTRL                0x10
5781
5782 #define MDIO_REG_BANK_RX3                               0x80e0
5783 #define MDIO_RX3_RX_EQ_BOOST                            0x1c
5784 #define MDIO_RX3_RX_EQ_BOOST_EQUALIZER_CTRL_MASK        0x7
5785 #define MDIO_RX3_RX_EQ_BOOST_OFFSET_CTRL                0x10
5786
5787 #define MDIO_REG_BANK_RX_ALL                            0x80f0
5788 #define MDIO_RX_ALL_RX_EQ_BOOST                         0x1c
5789 #define MDIO_RX_ALL_RX_EQ_BOOST_EQUALIZER_CTRL_MASK     0x7
5790 #define MDIO_RX_ALL_RX_EQ_BOOST_OFFSET_CTRL     0x10
5791
5792 #define MDIO_REG_BANK_TX0                               0x8060
5793 #define MDIO_TX0_TX_DRIVER                              0x17
5794 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
5795 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
5796 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
5797 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
5798 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
5799 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
5800 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
5801 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
5802 #define MDIO_TX0_TX_DRIVER_ICBUF1T                      1
5803
5804 #define MDIO_REG_BANK_TX1                               0x8070
5805 #define MDIO_TX1_TX_DRIVER                              0x17
5806 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
5807 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
5808 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
5809 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
5810 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
5811 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
5812 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
5813 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
5814 #define MDIO_TX0_TX_DRIVER_ICBUF1T                      1
5815
5816 #define MDIO_REG_BANK_TX2                               0x8080
5817 #define MDIO_TX2_TX_DRIVER                              0x17
5818 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
5819 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
5820 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
5821 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
5822 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
5823 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
5824 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
5825 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
5826 #define MDIO_TX0_TX_DRIVER_ICBUF1T                      1
5827
5828 #define MDIO_REG_BANK_TX3                               0x8090
5829 #define MDIO_TX3_TX_DRIVER                              0x17
5830 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_MASK             0xf000
5831 #define MDIO_TX0_TX_DRIVER_PREEMPHASIS_SHIFT            12
5832 #define MDIO_TX0_TX_DRIVER_IDRIVER_MASK                 0x0f00
5833 #define MDIO_TX0_TX_DRIVER_IDRIVER_SHIFT                8
5834 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_MASK              0x00f0
5835 #define MDIO_TX0_TX_DRIVER_IPREDRIVER_SHIFT             4
5836 #define MDIO_TX0_TX_DRIVER_IFULLSPD_MASK                0x000e
5837 #define MDIO_TX0_TX_DRIVER_IFULLSPD_SHIFT               1
5838 #define MDIO_TX0_TX_DRIVER_ICBUF1T                      1
5839
5840 #define MDIO_REG_BANK_XGXS_BLOCK0                       0x8000
5841 #define MDIO_BLOCK0_XGXS_CONTROL                        0x10
5842
5843 #define MDIO_REG_BANK_XGXS_BLOCK1                       0x8010
5844 #define MDIO_BLOCK1_LANE_CTRL0                          0x15
5845 #define MDIO_BLOCK1_LANE_CTRL1                          0x16
5846 #define MDIO_BLOCK1_LANE_CTRL2                          0x17
5847 #define MDIO_BLOCK1_LANE_PRBS                           0x19
5848
5849 #define MDIO_REG_BANK_XGXS_BLOCK2                       0x8100
5850 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP                     0x10
5851 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_ENABLE              0x8000
5852 #define MDIO_XGXS_BLOCK2_RX_LN_SWAP_FORCE_ENABLE        0x4000
5853 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP             0x11
5854 #define MDIO_XGXS_BLOCK2_TX_LN_SWAP_ENABLE              0x8000
5855 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G       0x14
5856 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_CX4_XGXS      0x0001
5857 #define MDIO_XGXS_BLOCK2_UNICORE_MODE_10G_HIGIG_XGXS    0x0010
5858 #define MDIO_XGXS_BLOCK2_TEST_MODE_LANE         0x15
5859
5860 #define MDIO_REG_BANK_GP_STATUS                         0x8120
5861 #define MDIO_GP_STATUS_TOP_AN_STATUS1                           0x1B
5862 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_AUTONEG_COMPLETE     0x0001
5863 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL37_AUTONEG_COMPLETE     0x0002
5864 #define MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS               0x0004
5865 #define MDIO_GP_STATUS_TOP_AN_STATUS1_DUPLEX_STATUS             0x0008
5866 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_MR_LP_NP_AN_ABLE     0x0010
5867 #define MDIO_GP_STATUS_TOP_AN_STATUS1_CL73_LP_NP_BAM_ABLE       0x0020
5868 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_TXSIDE    0x0040
5869 #define MDIO_GP_STATUS_TOP_AN_STATUS1_PAUSE_RSOLUTION_RXSIDE    0x0080
5870 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_MASK         0x3f00
5871 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10M          0x0000
5872 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_100M         0x0100
5873 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G           0x0200
5874 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_2_5G         0x0300
5875 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_5G           0x0400
5876 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_6G           0x0500
5877 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_HIG      0x0600
5878 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_CX4      0x0700
5879 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12G_HIG      0x0800
5880 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_12_5G        0x0900
5881 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_13G          0x0A00
5882 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_15G          0x0B00
5883 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_16G          0x0C00
5884 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_1G_KX        0x0D00
5885 #define MDIO_GP_STATUS_TOP_AN_STATUS1_ACTUAL_SPEED_10G_KX4      0x0E00
5886
5887
5888 #define MDIO_REG_BANK_10G_PARALLEL_DETECT               0x8130
5889 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS             0x10
5890 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_STATUS_PD_LINK             0x8000
5891 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL            0x11
5892 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_CONTROL_PARDET10G_EN       0x1
5893 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK               0x13
5894 #define MDIO_10G_PARALLEL_DETECT_PAR_DET_10G_LINK_CNT           (0xb71<<1)
5895
5896 #define MDIO_REG_BANK_SERDES_DIGITAL                    0x8300
5897 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1                    0x10
5898 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_FIBER_MODE                 0x0001
5899 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_TBI_IF                     0x0002
5900 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_SIGNAL_DETECT_EN           0x0004
5901 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_INVERT_SIGNAL_DETECT       0x0008
5902 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_AUTODET                    0x0010
5903 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL1_MSTR_MODE                  0x0020
5904 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2                    0x11
5905 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_PRL_DT_EN                  0x0001
5906 #define MDIO_SERDES_DIGITAL_A_1000X_CONTROL2_AN_FST_TMR                 0x0040
5907 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1                     0x14
5908 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SGMII                       0x0001
5909 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_LINK                        0x0002
5910 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_DUPLEX                      0x0004
5911 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_MASK                  0x0018
5912 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_SHIFT                 3
5913 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_2_5G                  0x0018
5914 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_1G                    0x0010
5915 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_100M                  0x0008
5916 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS1_SPEED_10M                   0x0000
5917 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2                     0x15
5918 #define MDIO_SERDES_DIGITAL_A_1000X_STATUS2_AN_DISABLED                 0x0002
5919 #define MDIO_SERDES_DIGITAL_MISC1                               0x18
5920 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_MASK                       0xE000
5921 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_25M                        0x0000
5922 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_100M                       0x2000
5923 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_125M                       0x4000
5924 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_156_25M                    0x6000
5925 #define MDIO_SERDES_DIGITAL_MISC1_REFCLK_SEL_187_5M                     0x8000
5926 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_SEL                       0x0010
5927 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_MASK                      0x000f
5928 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_2_5G                      0x0000
5929 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_5G                        0x0001
5930 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_6G                        0x0002
5931 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_HIG                   0x0003
5932 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_10G_CX4                   0x0004
5933 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12G                       0x0005
5934 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_12_5G                     0x0006
5935 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_13G                       0x0007
5936 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_15G                       0x0008
5937 #define MDIO_SERDES_DIGITAL_MISC1_FORCE_SPEED_16G                       0x0009
5938
5939 #define MDIO_REG_BANK_OVER_1G                           0x8320
5940 #define MDIO_OVER_1G_DIGCTL_3_4                                 0x14
5941 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_MASK                              0xffe0
5942 #define MDIO_OVER_1G_DIGCTL_3_4_MP_ID_SHIFT                             5
5943 #define MDIO_OVER_1G_UP1                                        0x19
5944 #define MDIO_OVER_1G_UP1_2_5G                                           0x0001
5945 #define MDIO_OVER_1G_UP1_5G                                             0x0002
5946 #define MDIO_OVER_1G_UP1_6G                                             0x0004
5947 #define MDIO_OVER_1G_UP1_10G                                            0x0010
5948 #define MDIO_OVER_1G_UP1_10GH                                           0x0008
5949 #define MDIO_OVER_1G_UP1_12G                                            0x0020
5950 #define MDIO_OVER_1G_UP1_12_5G                                          0x0040
5951 #define MDIO_OVER_1G_UP1_13G                                            0x0080
5952 #define MDIO_OVER_1G_UP1_15G                                            0x0100
5953 #define MDIO_OVER_1G_UP1_16G                                            0x0200
5954 #define MDIO_OVER_1G_UP2                                        0x1A
5955 #define MDIO_OVER_1G_UP2_IPREDRIVER_MASK                                0x0007
5956 #define MDIO_OVER_1G_UP2_IDRIVER_MASK                                   0x0038
5957 #define MDIO_OVER_1G_UP2_PREEMPHASIS_MASK                               0x03C0
5958 #define MDIO_OVER_1G_UP3                                        0x1B
5959 #define MDIO_OVER_1G_UP3_HIGIG2                                         0x0001
5960 #define MDIO_OVER_1G_LP_UP1                                     0x1C
5961 #define MDIO_OVER_1G_LP_UP2                                     0x1D
5962 #define MDIO_OVER_1G_LP_UP2_MR_ADV_OVER_1G_MASK                         0x03ff
5963 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_MASK                            0x0780
5964 #define MDIO_OVER_1G_LP_UP2_PREEMPHASIS_SHIFT                           7
5965 #define MDIO_OVER_1G_LP_UP3                                             0x1E
5966
5967 #define MDIO_REG_BANK_REMOTE_PHY                        0x8330
5968 #define MDIO_REMOTE_PHY_MISC_RX_STATUS                          0x10
5969 #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_OVER1G_MSG     0x0010
5970 #define MDIO_REMOTE_PHY_MISC_RX_STATUS_CL37_FSM_RECEIVED_BRCM_OUI_MSG   0x0600
5971
5972 #define MDIO_REG_BANK_BAM_NEXT_PAGE                     0x8350
5973 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL                   0x10
5974 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_BAM_MODE                  0x0001
5975 #define MDIO_BAM_NEXT_PAGE_MP5_NEXT_PAGE_CTRL_TETON_AN                  0x0002
5976
5977 #define MDIO_REG_BANK_CL73_USERB0               0x8370
5978 #define MDIO_CL73_USERB0_CL73_UCTRL                             0x10
5979 #define MDIO_CL73_USERB0_CL73_UCTRL_USTAT1_MUXSEL                       0x0002
5980 #define MDIO_CL73_USERB0_CL73_USTAT1                            0x11
5981 #define MDIO_CL73_USERB0_CL73_USTAT1_LINK_STATUS_CHECK                  0x0100
5982 #define MDIO_CL73_USERB0_CL73_USTAT1_AN_GOOD_CHECK_BAM37                0x0400
5983 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1                         0x12
5984 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_EN                          0x8000
5985 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_STATION_MNGR_EN             0x4000
5986 #define MDIO_CL73_USERB0_CL73_BAM_CTRL1_BAM_NP_AFTER_BP_EN              0x2000
5987 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3                         0x14
5988 #define MDIO_CL73_USERB0_CL73_BAM_CTRL3_USE_CL73_HCD_MR                 0x0001
5989
5990 #define MDIO_REG_BANK_AER_BLOCK                 0xFFD0
5991 #define MDIO_AER_BLOCK_AER_REG                                  0x1E
5992
5993 #define MDIO_REG_BANK_COMBO_IEEE0               0xFFE0
5994 #define MDIO_COMBO_IEEE0_MII_CONTROL                            0x10
5995 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_MASK                   0x2040
5996 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_10                     0x0000
5997 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_100                    0x2000
5998 #define MDIO_COMBO_IEEO_MII_CONTROL_MAN_SGMII_SP_1000                   0x0040
5999 #define MDIO_COMBO_IEEO_MII_CONTROL_FULL_DUPLEX                         0x0100
6000 #define MDIO_COMBO_IEEO_MII_CONTROL_RESTART_AN                          0x0200
6001 #define MDIO_COMBO_IEEO_MII_CONTROL_AN_EN                               0x1000
6002 #define MDIO_COMBO_IEEO_MII_CONTROL_LOOPBACK                            0x4000
6003 #define MDIO_COMBO_IEEO_MII_CONTROL_RESET                               0x8000
6004 #define MDIO_COMBO_IEEE0_MII_STATUS                             0x11
6005 #define MDIO_COMBO_IEEE0_MII_STATUS_LINK_PASS                           0x0004
6006 #define MDIO_COMBO_IEEE0_MII_STATUS_AUTONEG_COMPLETE                    0x0020
6007 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV                           0x14
6008 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_FULL_DUPLEX                       0x0020
6009 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_HALF_DUPLEX                       0x0040
6010 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK                        0x0180
6011 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE                        0x0000
6012 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_SYMMETRIC                   0x0080
6013 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC                  0x0100
6014 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH                        0x0180
6015 #define MDIO_COMBO_IEEE0_AUTO_NEG_ADV_NEXT_PAGE                         0x8000
6016 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1         0x15
6017 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_NEXT_PAGE       0x8000
6018 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_ACK             0x4000
6019 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_MASK      0x0180
6020 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_NONE      0x0000
6021 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_PAUSE_BOTH      0x0180
6022 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_HALF_DUP_CAP    0x0040
6023 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_FULL_DUP_CAP    0x0020
6024 /*WhenthelinkpartnerisinSGMIImode(bit0=1),then
6025 bit15=link,bit12=duplex,bits11:10=speed,bit14=acknowledge.
6026 Theotherbitsarereservedandshouldbezero*/
6027 #define MDIO_COMBO_IEEE0_AUTO_NEG_LINK_PARTNER_ABILITY1_SGMII_MODE      0x0001
6028
6029
6030 #define MDIO_PMA_DEVAD                  0x1
6031 /*ieee*/
6032 #define MDIO_PMA_REG_CTRL               0x0
6033 #define MDIO_PMA_REG_STATUS             0x1
6034 #define MDIO_PMA_REG_10G_CTRL2          0x7
6035 #define MDIO_PMA_REG_RX_SD              0xa
6036 /*bcm*/
6037 #define MDIO_PMA_REG_BCM_CTRL           0x0096
6038 #define MDIO_PMA_REG_FEC_CTRL           0x00ab
6039 #define MDIO_PMA_REG_RX_ALARM_CTRL      0x9000
6040 #define MDIO_PMA_REG_LASI_CTRL          0x9002
6041 #define MDIO_PMA_REG_RX_ALARM           0x9003
6042 #define MDIO_PMA_REG_TX_ALARM           0x9004
6043 #define MDIO_PMA_REG_LASI_STATUS        0x9005
6044 #define MDIO_PMA_REG_PHY_IDENTIFIER     0xc800
6045 #define MDIO_PMA_REG_DIGITAL_CTRL       0xc808
6046 #define MDIO_PMA_REG_DIGITAL_STATUS     0xc809
6047 #define MDIO_PMA_REG_TX_POWER_DOWN      0xca02
6048 #define MDIO_PMA_REG_CMU_PLL_BYPASS     0xca09
6049 #define MDIO_PMA_REG_MISC_CTRL          0xca0a
6050 #define MDIO_PMA_REG_GEN_CTRL           0xca10
6051 #define MDIO_PMA_REG_GEN_CTRL_ROM_RESET_INTERNAL_MP     0x0188
6052 #define MDIO_PMA_REG_GEN_CTRL_ROM_MICRO_RESET           0x018a
6053 #define MDIO_PMA_REG_M8051_MSGIN_REG    0xca12
6054 #define MDIO_PMA_REG_M8051_MSGOUT_REG   0xca13
6055 #define MDIO_PMA_REG_ROM_VER1           0xca19
6056 #define MDIO_PMA_REG_ROM_VER2           0xca1a
6057 #define MDIO_PMA_REG_EDC_FFE_MAIN       0xca1b
6058 #define MDIO_PMA_REG_PLL_BANDWIDTH      0xca1d
6059 #define MDIO_PMA_REG_PLL_CTRL           0xca1e
6060 #define MDIO_PMA_REG_MISC_CTRL0         0xca23
6061 #define MDIO_PMA_REG_LRM_MODE           0xca3f
6062 #define MDIO_PMA_REG_CDR_BANDWIDTH      0xca46
6063 #define MDIO_PMA_REG_MISC_CTRL1         0xca85
6064
6065 #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL          0x8000
6066 #define MDIO_PMA_REG_SFP_TWO_WIRE_CTRL_STATUS_MASK      0x000c
6067 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IDLE           0x0000
6068 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_COMPLETE       0x0004
6069 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_IN_PROGRESS    0x0008
6070 #define MDIO_PMA_REG_SFP_TWO_WIRE_STATUS_FAILED         0x000c
6071 #define MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT      0x8002
6072 #define MDIO_PMA_REG_SFP_TWO_WIRE_MEM_ADDR      0x8003
6073 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_BUF     0xc820
6074 #define MDIO_PMA_REG_8726_TWO_WIRE_DATA_MASK 0xff
6075 #define MDIO_PMA_REG_8726_TX_CTRL1              0xca01
6076 #define MDIO_PMA_REG_8726_TX_CTRL2              0xca05
6077
6078 #define MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR   0x8005
6079 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_BUF     0x8007
6080 #define MDIO_PMA_REG_8727_TWO_WIRE_DATA_MASK 0xff
6081 #define MDIO_PMA_REG_8727_TX_CTRL1              0xca02
6082 #define MDIO_PMA_REG_8727_TX_CTRL2              0xca05
6083 #define MDIO_PMA_REG_8727_PCS_OPT_CTRL          0xc808
6084 #define MDIO_PMA_REG_8727_GPIO_CTRL             0xc80e
6085 #define MDIO_PMA_REG_8727_PCS_GP                0xc842
6086 #define MDIO_PMA_REG_8727_OPT_CFG_REG           0xc8e4
6087
6088 #define MDIO_AN_REG_8727_MISC_CTRL              0x8309
6089
6090 #define MDIO_PMA_REG_8073_CHIP_REV                      0xc801
6091 #define MDIO_PMA_REG_8073_SPEED_LINK_STATUS             0xc820
6092 #define MDIO_PMA_REG_8073_XAUI_WA                       0xc841
6093 #define MDIO_PMA_REG_8073_OPT_DIGITAL_CTRL              0xcd08
6094
6095 #define MDIO_PMA_REG_7101_RESET         0xc000
6096 #define MDIO_PMA_REG_7107_LED_CNTL      0xc007
6097 #define MDIO_PMA_REG_7107_LINK_LED_CNTL 0xc009
6098 #define MDIO_PMA_REG_7101_VER1          0xc026
6099 #define MDIO_PMA_REG_7101_VER2          0xc027
6100
6101 #define MDIO_PMA_REG_8481_PMD_SIGNAL                    0xa811
6102 #define MDIO_PMA_REG_8481_LED1_MASK                     0xa82c
6103 #define MDIO_PMA_REG_8481_LED2_MASK                     0xa82f
6104 #define MDIO_PMA_REG_8481_LED3_MASK                     0xa832
6105 #define MDIO_PMA_REG_8481_LED3_BLINK                    0xa834
6106 #define MDIO_PMA_REG_8481_LED5_MASK                     0xa838
6107 #define MDIO_PMA_REG_8481_SIGNAL_MASK                   0xa835
6108 #define MDIO_PMA_REG_8481_LINK_SIGNAL                   0xa83b
6109 #define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_MASK  0x800
6110 #define MDIO_PMA_REG_8481_LINK_SIGNAL_LED4_ENABLE_SHIFT 11
6111
6112
6113 #define MDIO_WIS_DEVAD                  0x2
6114 /*bcm*/
6115 #define MDIO_WIS_REG_LASI_CNTL          0x9002
6116 #define MDIO_WIS_REG_LASI_STATUS        0x9005
6117
6118 #define MDIO_PCS_DEVAD                  0x3
6119 #define MDIO_PCS_REG_STATUS             0x0020
6120 #define MDIO_PCS_REG_LASI_STATUS        0x9005
6121 #define MDIO_PCS_REG_7101_DSP_ACCESS    0xD000
6122 #define MDIO_PCS_REG_7101_SPI_MUX       0xD008
6123 #define MDIO_PCS_REG_7101_SPI_CTRL_ADDR 0xE12A
6124 #define MDIO_PCS_REG_7101_SPI_RESET_BIT (5)
6125 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR 0xE02A
6126 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_WRITE_ENABLE_CMD (6)
6127 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_BULK_ERASE_CMD   (0xC7)
6128 #define MDIO_PCS_REG_7101_SPI_FIFO_ADDR_PAGE_PROGRAM_CMD (2)
6129 #define MDIO_PCS_REG_7101_SPI_BYTES_TO_TRANSFER_ADDR 0xE028
6130
6131
6132 #define MDIO_XS_DEVAD                   0x4
6133 #define MDIO_XS_PLL_SEQUENCER           0x8000
6134 #define MDIO_XS_SFX7101_XGXS_TEST1      0xc00a
6135
6136 #define MDIO_XS_8706_REG_BANK_RX0       0x80bc
6137 #define MDIO_XS_8706_REG_BANK_RX1       0x80cc
6138 #define MDIO_XS_8706_REG_BANK_RX2       0x80dc
6139 #define MDIO_XS_8706_REG_BANK_RX3       0x80ec
6140 #define MDIO_XS_8706_REG_BANK_RXA       0x80fc
6141
6142 #define MDIO_XS_REG_8073_RX_CTRL_PCIE   0x80FA
6143
6144 #define MDIO_AN_DEVAD                   0x7
6145 /*ieee*/
6146 #define MDIO_AN_REG_CTRL                0x0000
6147 #define MDIO_AN_REG_STATUS              0x0001
6148 #define MDIO_AN_REG_STATUS_AN_COMPLETE          0x0020
6149 #define MDIO_AN_REG_ADV_PAUSE           0x0010
6150 #define MDIO_AN_REG_ADV_PAUSE_PAUSE             0x0400
6151 #define MDIO_AN_REG_ADV_PAUSE_ASYMMETRIC        0x0800
6152 #define MDIO_AN_REG_ADV_PAUSE_BOTH              0x0C00
6153 #define MDIO_AN_REG_ADV_PAUSE_MASK              0x0C00
6154 #define MDIO_AN_REG_ADV                 0x0011
6155 #define MDIO_AN_REG_ADV2                0x0012
6156 #define MDIO_AN_REG_LP_AUTO_NEG         0x0013
6157 #define MDIO_AN_REG_MASTER_STATUS       0x0021
6158 /*bcm*/
6159 #define MDIO_AN_REG_LINK_STATUS         0x8304
6160 #define MDIO_AN_REG_CL37_CL73           0x8370
6161 #define MDIO_AN_REG_CL37_AN             0xffe0
6162 #define MDIO_AN_REG_CL37_FC_LD          0xffe4
6163 #define MDIO_AN_REG_CL37_FC_LP          0xffe5
6164
6165 #define MDIO_AN_REG_8073_2_5G           0x8329
6166 #define MDIO_AN_REG_8073_BAM            0x8350
6167
6168 #define MDIO_AN_REG_8481_10GBASE_T_AN_CTRL      0x0020
6169 #define MDIO_AN_REG_8481_LEGACY_MII_CTRL        0xffe0
6170 #define MDIO_AN_REG_8481_LEGACY_MII_STATUS      0xffe1
6171 #define MDIO_AN_REG_8481_LEGACY_AN_ADV          0xffe4
6172 #define MDIO_AN_REG_8481_LEGACY_AN_EXPANSION    0xffe6
6173 #define MDIO_AN_REG_8481_1000T_CTRL             0xffe9
6174 #define MDIO_AN_REG_8481_EXPANSION_REG_RD_RW    0xfff5
6175 #define MDIO_AN_REG_8481_EXPANSION_REG_ACCESS   0xfff7
6176 #define MDIO_AN_REG_8481_AUX_CTRL               0xfff8
6177 #define MDIO_AN_REG_8481_LEGACY_SHADOW          0xfffc
6178
6179 /* BCM84823 only */
6180 #define MDIO_CTL_DEVAD                  0x1e
6181 #define MDIO_CTL_REG_84823_MEDIA                0x401a
6182 #define MDIO_CTL_REG_84823_MEDIA_MAC_MASK               0x0018
6183         /* These pins configure the BCM84823 interface to MAC after reset. */
6184 #define MDIO_CTL_REG_84823_CTRL_MAC_XFI                 0x0008
6185 #define MDIO_CTL_REG_84823_MEDIA_MAC_XAUI_M             0x0010
6186         /* These pins configure the BCM84823 interface to Line after reset. */
6187 #define MDIO_CTL_REG_84823_MEDIA_LINE_MASK              0x0060
6188 #define MDIO_CTL_REG_84823_MEDIA_LINE_XAUI_L            0x0020
6189 #define MDIO_CTL_REG_84823_MEDIA_LINE_XFI               0x0040
6190         /* When this pin is active high during reset, 10GBASE-T core is power
6191          * down, When it is active low the 10GBASE-T is power up
6192          */
6193 #define MDIO_CTL_REG_84823_MEDIA_COPPER_CORE_DOWN       0x0080
6194 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_MASK          0x0100
6195 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_COPPER        0x0000
6196 #define MDIO_CTL_REG_84823_MEDIA_PRIORITY_FIBER         0x0100
6197 #define MDIO_CTL_REG_84823_MEDIA_FIBER_1G                       0x1000
6198 #define MDIO_CTL_REG_84823_USER_CTRL_REG                0x4005
6199 #define MDIO_CTL_REG_84823_USER_CTRL_CMS                0x0080
6200
6201 #define MDIO_PMA_REG_84823_CTL_LED_CTL_1                0xa8e3
6202 #define MDIO_PMA_REG_84823_LED3_STRETCH_EN              0x0080
6203
6204 #define IGU_FUNC_BASE                   0x0400
6205
6206 #define IGU_ADDR_MSIX                   0x0000
6207 #define IGU_ADDR_INT_ACK                0x0200
6208 #define IGU_ADDR_PROD_UPD               0x0201
6209 #define IGU_ADDR_ATTN_BITS_UPD  0x0202
6210 #define IGU_ADDR_ATTN_BITS_SET  0x0203
6211 #define IGU_ADDR_ATTN_BITS_CLR  0x0204
6212 #define IGU_ADDR_COALESCE_NOW   0x0205
6213 #define IGU_ADDR_SIMD_MASK              0x0206
6214 #define IGU_ADDR_SIMD_NOMASK    0x0207
6215 #define IGU_ADDR_MSI_CTL                0x0210
6216 #define IGU_ADDR_MSI_ADDR_LO    0x0211
6217 #define IGU_ADDR_MSI_ADDR_HI    0x0212
6218 #define IGU_ADDR_MSI_DATA               0x0213
6219
6220 #define IGU_INT_ENABLE                  0
6221 #define IGU_INT_DISABLE                 1
6222 #define IGU_INT_NOP                             2
6223 #define IGU_INT_NOP2                    3
6224
6225 #define IGU_USE_REGISTER_ustorm_type_0_sb_cleanup  0
6226 #define IGU_USE_REGISTER_ustorm_type_1_sb_cleanup  1
6227 #define IGU_USE_REGISTER_cstorm_type_0_sb_cleanup  2
6228 #define IGU_USE_REGISTER_cstorm_type_1_sb_cleanup  3
6229
6230 #define COMMAND_REG_INT_ACK         0x0
6231 #define COMMAND_REG_PROD_UPD        0x4
6232 #define COMMAND_REG_ATTN_BITS_UPD   0x8
6233 #define COMMAND_REG_ATTN_BITS_SET   0xc
6234 #define COMMAND_REG_ATTN_BITS_CLR   0x10
6235 #define COMMAND_REG_COALESCE_NOW    0x14
6236 #define COMMAND_REG_SIMD_MASK       0x18
6237 #define COMMAND_REG_SIMD_NOMASK     0x1c
6238
6239
6240 #define IGU_MEM_BASE                                            0x0000
6241
6242 #define IGU_MEM_MSIX_BASE                                       0x0000
6243 #define IGU_MEM_MSIX_UPPER                                      0x007f
6244 #define IGU_MEM_MSIX_RESERVED_UPPER                     0x01ff
6245
6246 #define IGU_MEM_PBA_MSIX_BASE                           0x0200
6247 #define IGU_MEM_PBA_MSIX_UPPER                          0x0200
6248
6249 #define IGU_CMD_BACKWARD_COMP_PROD_UPD          0x0201
6250 #define IGU_MEM_PBA_MSIX_RESERVED_UPPER         0x03ff
6251
6252 #define IGU_CMD_INT_ACK_BASE                            0x0400
6253 #define IGU_CMD_INT_ACK_UPPER\
6254         (IGU_CMD_INT_ACK_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
6255 #define IGU_CMD_INT_ACK_RESERVED_UPPER          0x04ff
6256
6257 #define IGU_CMD_E2_PROD_UPD_BASE                        0x0500
6258 #define IGU_CMD_E2_PROD_UPD_UPPER\
6259         (IGU_CMD_E2_PROD_UPD_BASE + MAX_SB_PER_PORT * NUM_OF_PORTS_PER_PATH - 1)
6260 #define IGU_CMD_E2_PROD_UPD_RESERVED_UPPER      0x059f
6261
6262 #define IGU_CMD_ATTN_BIT_UPD_UPPER                      0x05a0
6263 #define IGU_CMD_ATTN_BIT_SET_UPPER                      0x05a1
6264 #define IGU_CMD_ATTN_BIT_CLR_UPPER                      0x05a2
6265
6266 #define IGU_REG_SISR_MDPC_WMASK_UPPER           0x05a3
6267 #define IGU_REG_SISR_MDPC_WMASK_LSB_UPPER       0x05a4
6268 #define IGU_REG_SISR_MDPC_WMASK_MSB_UPPER       0x05a5
6269 #define IGU_REG_SISR_MDPC_WOMASK_UPPER          0x05a6
6270
6271 #define IGU_REG_RESERVED_UPPER                          0x05ff
6272 /* Fields of IGU PF CONFIGRATION REGISTER */
6273 #define IGU_PF_CONF_FUNC_EN       (0x1<<0)  /* function enable        */
6274 #define IGU_PF_CONF_MSI_MSIX_EN   (0x1<<1)  /* MSI/MSIX enable        */
6275 #define IGU_PF_CONF_INT_LINE_EN   (0x1<<2)  /* INT enable             */
6276 #define IGU_PF_CONF_ATTN_BIT_EN   (0x1<<3)  /* attention enable       */
6277 #define IGU_PF_CONF_SINGLE_ISR_EN (0x1<<4)  /* single ISR mode enable */
6278 #define IGU_PF_CONF_SIMD_MODE     (0x1<<5)  /* simd all ones mode     */
6279
6280 /* Fields of IGU VF CONFIGRATION REGISTER */
6281 #define IGU_VF_CONF_FUNC_EN        (0x1<<0)  /* function enable        */
6282 #define IGU_VF_CONF_MSI_MSIX_EN    (0x1<<1)  /* MSI/MSIX enable        */
6283 #define IGU_VF_CONF_PARENT_MASK    (0x3<<2)  /* Parent PF              */
6284 #define IGU_VF_CONF_PARENT_SHIFT   2         /* Parent PF              */
6285 #define IGU_VF_CONF_SINGLE_ISR_EN  (0x1<<4)  /* single ISR mode enable */
6286
6287
6288 #define IGU_BC_DSB_NUM_SEGS    5
6289 #define IGU_BC_NDSB_NUM_SEGS   2
6290 #define IGU_NORM_DSB_NUM_SEGS  2
6291 #define IGU_NORM_NDSB_NUM_SEGS 1
6292 #define IGU_BC_BASE_DSB_PROD   128
6293 #define IGU_NORM_BASE_DSB_PROD 136
6294
6295 #define IGU_CTRL_CMD_TYPE_WR\
6296         1
6297 #define IGU_CTRL_CMD_TYPE_RD\
6298         0
6299
6300 #define IGU_SEG_ACCESS_NORM   0
6301 #define IGU_SEG_ACCESS_DEF    1
6302 #define IGU_SEG_ACCESS_ATTN   2
6303
6304         /* FID (if VF - [6] = 0; [5:0] = VF number; if PF - [6] = 1; \
6305         [5:2] = 0; [1:0] = PF number) */
6306 #define IGU_FID_ENCODE_IS_PF        (0x1<<6)
6307 #define IGU_FID_ENCODE_IS_PF_SHIFT  6
6308 #define IGU_FID_VF_NUM_MASK         (0x3f)
6309 #define IGU_FID_PF_NUM_MASK         (0x7)
6310
6311 #define IGU_REG_MAPPING_MEMORY_VALID            (1<<0)
6312 #define IGU_REG_MAPPING_MEMORY_VECTOR_MASK      (0x3F<<1)
6313 #define IGU_REG_MAPPING_MEMORY_VECTOR_SHIFT     1
6314 #define IGU_REG_MAPPING_MEMORY_FID_MASK (0x7F<<7)
6315 #define IGU_REG_MAPPING_MEMORY_FID_SHIFT        7
6316
6317
6318 #define CDU_REGION_NUMBER_XCM_AG 2
6319 #define CDU_REGION_NUMBER_UCM_AG 4
6320
6321
6322 /**
6323  * String-to-compress [31:8] = CID (all 24 bits)
6324  * String-to-compress [7:4] = Region
6325  * String-to-compress [3:0] = Type
6326  */
6327 #define CDU_VALID_DATA(_cid, _region, _type)\
6328         (((_cid) << 8) | (((_region)&0xf)<<4) | (((_type)&0xf)))
6329 #define CDU_CRC8(_cid, _region, _type)\
6330         (calc_crc8(CDU_VALID_DATA(_cid, _region, _type), 0xff))
6331 #define CDU_RSRVD_VALUE_TYPE_A(_cid, _region, _type)\
6332         (0x80 | ((CDU_CRC8(_cid, _region, _type)) & 0x7f))
6333 #define CDU_RSRVD_VALUE_TYPE_B(_crc, _type)\
6334         (0x80 | ((_type)&0xf << 3) | ((CDU_CRC8(_cid, _region, _type)) & 0x7))
6335 #define CDU_RSRVD_INVALIDATE_CONTEXT_VALUE(_val) ((_val) & ~0x80)
6336
6337 /******************************************************************************
6338  * Description:
6339  *         Calculates crc 8 on a word value: polynomial 0-1-2-8
6340  *         Code was translated from Verilog.
6341  * Return:
6342  *****************************************************************************/
6343 static inline u8 calc_crc8(u32 data, u8 crc)
6344 {
6345         u8 D[32];
6346         u8 NewCRC[8];
6347         u8 C[8];
6348         u8 crc_res;
6349         u8 i;
6350
6351         /* split the data into 31 bits */
6352         for (i = 0; i < 32; i++) {
6353                 D[i] = (u8)(data & 1);
6354                 data = data >> 1;
6355         }
6356
6357         /* split the crc into 8 bits */
6358         for (i = 0; i < 8; i++) {
6359                 C[i] = crc & 1;
6360                 crc = crc >> 1;
6361         }
6362
6363         NewCRC[0] = D[31] ^ D[30] ^ D[28] ^ D[23] ^ D[21] ^ D[19] ^ D[18] ^
6364                     D[16] ^ D[14] ^ D[12] ^ D[8] ^ D[7] ^ D[6] ^ D[0] ^ C[4] ^
6365                     C[6] ^ C[7];
6366         NewCRC[1] = D[30] ^ D[29] ^ D[28] ^ D[24] ^ D[23] ^ D[22] ^ D[21] ^
6367                     D[20] ^ D[18] ^ D[17] ^ D[16] ^ D[15] ^ D[14] ^ D[13] ^
6368                     D[12] ^ D[9] ^ D[6] ^ D[1] ^ D[0] ^ C[0] ^ C[4] ^ C[5] ^
6369                     C[6];
6370         NewCRC[2] = D[29] ^ D[28] ^ D[25] ^ D[24] ^ D[22] ^ D[17] ^ D[15] ^
6371                     D[13] ^ D[12] ^ D[10] ^ D[8] ^ D[6] ^ D[2] ^ D[1] ^ D[0] ^
6372                     C[0] ^ C[1] ^ C[4] ^ C[5];
6373         NewCRC[3] = D[30] ^ D[29] ^ D[26] ^ D[25] ^ D[23] ^ D[18] ^ D[16] ^
6374                     D[14] ^ D[13] ^ D[11] ^ D[9] ^ D[7] ^ D[3] ^ D[2] ^ D[1] ^
6375                     C[1] ^ C[2] ^ C[5] ^ C[6];
6376         NewCRC[4] = D[31] ^ D[30] ^ D[27] ^ D[26] ^ D[24] ^ D[19] ^ D[17] ^
6377                     D[15] ^ D[14] ^ D[12] ^ D[10] ^ D[8] ^ D[4] ^ D[3] ^ D[2] ^
6378                     C[0] ^ C[2] ^ C[3] ^ C[6] ^ C[7];
6379         NewCRC[5] = D[31] ^ D[28] ^ D[27] ^ D[25] ^ D[20] ^ D[18] ^ D[16] ^
6380                     D[15] ^ D[13] ^ D[11] ^ D[9] ^ D[5] ^ D[4] ^ D[3] ^ C[1] ^
6381                     C[3] ^ C[4] ^ C[7];
6382         NewCRC[6] = D[29] ^ D[28] ^ D[26] ^ D[21] ^ D[19] ^ D[17] ^ D[16] ^
6383                     D[14] ^ D[12] ^ D[10] ^ D[6] ^ D[5] ^ D[4] ^ C[2] ^ C[4] ^
6384                     C[5];
6385         NewCRC[7] = D[30] ^ D[29] ^ D[27] ^ D[22] ^ D[20] ^ D[18] ^ D[17] ^
6386                     D[15] ^ D[13] ^ D[11] ^ D[7] ^ D[6] ^ D[5] ^ C[3] ^ C[5] ^
6387                     C[6];
6388
6389         crc_res = 0;
6390         for (i = 0; i < 8; i++)
6391                 crc_res |= (NewCRC[i] << i);
6392
6393         return crc_res;
6394 }
6395
6396
6397 #endif /* BNX2X_REG_H */