2 * Copyright (C) 2002 Pavel Machek <pavel@ucw.cz>
3 * Copyright (C) 2002-2005 by David Brownell
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
20 // #define DEBUG // error path messages, extra info
21 // #define VERBOSE // more; success messages
23 #include <linux/module.h>
24 #include <linux/init.h>
25 #include <linux/netdevice.h>
26 #include <linux/ethtool.h>
27 #include <linux/workqueue.h>
28 #include <linux/mii.h>
29 #include <linux/crc32.h>
30 #include <linux/usb.h>
31 #include <linux/usb/cdc.h>
32 #include <linux/usb/usbnet.h>
36 * All known Zaurii lie about their standards conformance. At least
37 * the earliest SA-1100 models lie by saying they support CDC Ethernet.
38 * Some later models (especially PXA-25x and PXA-27x based ones) lie
39 * and say they support CDC MDLM (for access to cell phone modems).
41 * There are non-Zaurus products that use these same protocols too.
43 * The annoying thing is that at the same time Sharp was developing
44 * that annoying standards-breaking software, the Linux community had
45 * a simple "CDC Subset" working reliably on the same SA-1100 hardware.
46 * That is, the same functionality but not violating standards.
48 * The CDC Ethernet nonconformance points are troublesome to hosts
49 * with a true CDC Ethernet implementation:
50 * - Framing appends a CRC, which the spec says drivers "must not" do;
51 * - Transfers data in altsetting zero, instead of altsetting 1;
52 * - All these peripherals use the same ethernet address.
54 * The CDC MDLM nonconformance is less immediately troublesome, since all
55 * MDLM implementations are quasi-proprietary anyway.
58 static struct sk_buff
*
59 zaurus_tx_fixup(struct usbnet
*dev
, struct sk_buff
*skb
, gfp_t flags
)
65 if (!skb_cloned(skb
)) {
66 int tailroom
= skb_tailroom(skb
);
67 if ((padlen
+ 4) <= tailroom
)
70 skb2
= skb_copy_expand(skb
, 0, 4 + padlen
, flags
);
71 dev_kfree_skb_any(skb
);
76 fcs
= crc32_le(~0, skb
->data
, skb
->len
);
79 *skb_put (skb
, 1) = fcs
& 0xff;
80 *skb_put (skb
, 1) = (fcs
>> 8) & 0xff;
81 *skb_put (skb
, 1) = (fcs
>>16) & 0xff;
82 *skb_put (skb
, 1) = (fcs
>>24) & 0xff;
87 static int zaurus_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
89 /* Belcarra's funky framing has other options; mostly
90 * TRAILERS (!) with 4 bytes CRC, and maybe 2 pad bytes.
92 dev
->net
->hard_header_len
+= 6;
93 dev
->rx_urb_size
= dev
->net
->hard_header_len
+ dev
->net
->mtu
;
94 return usbnet_generic_cdc_bind(dev
, intf
);
97 /* PDA style devices are always connected if present */
98 static int always_connected (struct usbnet
*dev
)
103 static const struct driver_info zaurus_sl5x00_info
= {
104 .description
= "Sharp Zaurus SL-5x00",
105 .flags
= FLAG_POINTTOPOINT
| FLAG_FRAMING_Z
,
106 .check_connect
= always_connected
,
108 .unbind
= usbnet_cdc_unbind
,
109 .tx_fixup
= zaurus_tx_fixup
,
111 #define ZAURUS_STRONGARM_INFO ((unsigned long)&zaurus_sl5x00_info)
113 static const struct driver_info zaurus_pxa_info
= {
114 .description
= "Sharp Zaurus, PXA-2xx based",
115 .flags
= FLAG_POINTTOPOINT
| FLAG_FRAMING_Z
,
116 .check_connect
= always_connected
,
118 .unbind
= usbnet_cdc_unbind
,
119 .tx_fixup
= zaurus_tx_fixup
,
121 #define ZAURUS_PXA_INFO ((unsigned long)&zaurus_pxa_info)
123 static const struct driver_info olympus_mxl_info
= {
124 .description
= "Olympus R1000",
125 .flags
= FLAG_POINTTOPOINT
| FLAG_FRAMING_Z
,
126 .check_connect
= always_connected
,
128 .unbind
= usbnet_cdc_unbind
,
129 .tx_fixup
= zaurus_tx_fixup
,
131 #define OLYMPUS_MXL_INFO ((unsigned long)&olympus_mxl_info)
134 /* Some more recent products using Lineo/Belcarra code will wrongly claim
135 * CDC MDLM conformance. They aren't conformant: data endpoints live
136 * in the control interface, there's no data interface, and it's not used
137 * to talk to a cell phone radio. But at least we can detect these two
138 * pseudo-classes, rather than growing this product list with entries for
139 * each new nonconformant product (sigh).
141 static const u8 safe_guid
[16] = {
142 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
143 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
145 static const u8 blan_guid
[16] = {
146 0x74, 0xf0, 0x3d, 0xbd, 0x1e, 0xc1, 0x44, 0x70,
147 0xa3, 0x67, 0x71, 0x34, 0xc9, 0xf5, 0x54, 0x37,
150 static int blan_mdlm_bind(struct usbnet
*dev
, struct usb_interface
*intf
)
152 u8
*buf
= intf
->cur_altsetting
->extra
;
153 int len
= intf
->cur_altsetting
->extralen
;
154 struct usb_cdc_mdlm_desc
*desc
= NULL
;
155 struct usb_cdc_mdlm_detail_desc
*detail
= NULL
;
158 if (buf
[1] != USB_DT_CS_INTERFACE
)
161 /* use bDescriptorSubType, and just verify that we get a
162 * "BLAN" (or "SAFE") descriptor.
165 case USB_CDC_MDLM_TYPE
:
167 dev_dbg(&intf
->dev
, "extra MDLM\n");
171 if (desc
->bLength
!= sizeof *desc
) {
172 dev_dbg(&intf
->dev
, "MDLM len %u\n",
176 /* expect bcdVersion 1.0, ignore */
177 if (memcmp(&desc
->bGUID
, blan_guid
, 16) &&
178 memcmp(&desc
->bGUID
, safe_guid
, 16)) {
179 /* hey, this one might _really_ be MDLM! */
180 dev_dbg(&intf
->dev
, "MDLM guid\n");
184 case USB_CDC_MDLM_DETAIL_TYPE
:
186 dev_dbg(&intf
->dev
, "extra MDLM detail\n");
189 detail
= (void *) buf
;
190 switch (detail
->bGuidDescriptorType
) {
192 if (detail
->bLength
!= (sizeof *detail
+ 2))
196 if (detail
->bLength
!= (sizeof *detail
+ 3))
203 /* assuming we either noticed BLAN already, or will
204 * find it soon, there are some data bytes here:
205 * - bmNetworkCapabilities (unused)
206 * - bmDataCapabilities (bits, see below)
207 * - bPad (ignored, for PADAFTER -- BLAN-only)
209 * - 0x01 -- Zaurus framing (add CRC)
210 * - 0x02 -- PADBEFORE (CRC includes some padding)
211 * - 0x04 -- PADAFTER (some padding after CRC)
212 * - 0x08 -- "fermat" packet mangling (for hw bugs)
213 * the PADBEFORE appears not to matter; we interop
214 * with devices that use it and those that don't.
216 if ((detail
->bDetailData
[1] & ~0x02) != 0x01) {
217 /* bmDataCapabilities == 0 would be fine too,
218 * but framing is minidriver-coupled for now.
222 "bad MDLM detail, %d %d %d\n",
224 detail
->bDetailData
[0],
225 detail
->bDetailData
[2]);
229 /* same extra framing as for non-BLAN mode */
230 dev
->net
->hard_header_len
+= 6;
231 dev
->rx_urb_size
= dev
->net
->hard_header_len
236 len
-= buf
[0]; /* bLength */
240 if (!desc
|| !detail
) {
241 dev_dbg(&intf
->dev
, "missing cdc mdlm %s%sdescriptor\n",
243 detail
? "" : "detail ");
247 /* There's probably a CDC Ethernet descriptor there, but we can't
248 * rely on the Ethernet address it provides since not all vendors
249 * bother to make it unique. Likewise there's no point in tracking
250 * of the CDC event notifications.
252 return usbnet_get_endpoints(dev
, intf
);
255 dev_info(&dev
->udev
->dev
, "unsupported MDLM descriptors\n");
259 static const struct driver_info bogus_mdlm_info
= {
260 .description
= "pseudo-MDLM (BLAN) device",
261 .flags
= FLAG_POINTTOPOINT
| FLAG_FRAMING_Z
,
262 .check_connect
= always_connected
,
263 .tx_fixup
= zaurus_tx_fixup
,
264 .bind
= blan_mdlm_bind
,
267 static const struct usb_device_id products
[] = {
268 #define ZAURUS_MASTER_INTERFACE \
269 .bInterfaceClass = USB_CLASS_COMM, \
270 .bInterfaceSubClass = USB_CDC_SUBCLASS_ETHERNET, \
271 .bInterfaceProtocol = USB_CDC_PROTO_NONE
273 /* SA-1100 based Sharp Zaurus ("collie"), or compatible. */
275 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
276 | USB_DEVICE_ID_MATCH_DEVICE
,
279 ZAURUS_MASTER_INTERFACE
,
280 .driver_info
= ZAURUS_STRONGARM_INFO
,
283 /* PXA-2xx based models are also lying-about-cdc. If you add any
284 * more devices that claim to be CDC Ethernet, make sure they get
285 * added to the blacklist in cdc_ether too.
287 * NOTE: OpenZaurus versions with 2.6 kernels won't use these entries,
288 * unlike the older ones with 2.4 "embedix" kernels.
291 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
292 | USB_DEVICE_ID_MATCH_DEVICE
,
294 .idProduct
= 0x8005, /* A-300 */
295 ZAURUS_MASTER_INTERFACE
,
296 .driver_info
= ZAURUS_PXA_INFO
,
298 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
299 | USB_DEVICE_ID_MATCH_DEVICE
,
301 .idProduct
= 0x8006, /* B-500/SL-5600 */
302 ZAURUS_MASTER_INTERFACE
,
303 .driver_info
= ZAURUS_PXA_INFO
,
305 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
306 | USB_DEVICE_ID_MATCH_DEVICE
,
308 .idProduct
= 0x8007, /* C-700 */
309 ZAURUS_MASTER_INTERFACE
,
310 .driver_info
= ZAURUS_PXA_INFO
,
312 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
313 | USB_DEVICE_ID_MATCH_DEVICE
,
315 .idProduct
= 0x9031, /* C-750 C-760 */
316 ZAURUS_MASTER_INTERFACE
,
317 .driver_info
= ZAURUS_PXA_INFO
,
319 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
320 | USB_DEVICE_ID_MATCH_DEVICE
,
322 .idProduct
= 0x9032, /* SL-6000 */
323 ZAURUS_MASTER_INTERFACE
,
324 .driver_info
= ZAURUS_PXA_INFO
,
326 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
327 | USB_DEVICE_ID_MATCH_DEVICE
,
329 /* reported with some C860 units */
330 .idProduct
= 0x9050, /* C-860 */
331 ZAURUS_MASTER_INTERFACE
,
332 .driver_info
= ZAURUS_PXA_INFO
,
336 /* At least some of the newest PXA units have very different lies about
337 * their standards support: they claim to be cell phones offering
338 * direct access to their radios! (No, they don't conform to CDC MDLM.)
341 USB_INTERFACE_INFO(USB_CLASS_COMM
, USB_CDC_SUBCLASS_MDLM
,
343 .driver_info
= (unsigned long) &bogus_mdlm_info
,
345 /* Motorola MOTOMAGX phones */
346 USB_DEVICE_AND_INTERFACE_INFO(0x22b8, 0x6425, USB_CLASS_COMM
,
347 USB_CDC_SUBCLASS_MDLM
, USB_CDC_PROTO_NONE
),
348 .driver_info
= (unsigned long) &bogus_mdlm_info
,
351 /* Olympus has some models with a Zaurus-compatible option.
352 * R-1000 uses a FreeScale i.MXL cpu (ARMv4T)
355 .match_flags
= USB_DEVICE_ID_MATCH_INT_INFO
356 | USB_DEVICE_ID_MATCH_DEVICE
,
358 .idProduct
= 0x0F02, /* R-1000 */
359 ZAURUS_MASTER_INTERFACE
,
360 .driver_info
= OLYMPUS_MXL_INFO
,
364 MODULE_DEVICE_TABLE(usb
, products
);
366 static struct usb_driver zaurus_driver
= {
368 .id_table
= products
,
369 .probe
= usbnet_probe
,
370 .disconnect
= usbnet_disconnect
,
371 .suspend
= usbnet_suspend
,
372 .resume
= usbnet_resume
,
375 static int __init
zaurus_init(void)
377 return usb_register(&zaurus_driver
);
379 module_init(zaurus_init
);
381 static void __exit
zaurus_exit(void)
383 usb_deregister(&zaurus_driver
);
385 module_exit(zaurus_exit
);
387 MODULE_AUTHOR("Pavel Machek, David Brownell");
388 MODULE_DESCRIPTION("Sharp Zaurus PDA, and compatible products");
389 MODULE_LICENSE("GPL");