sfc: Don't use enums as a bitmask.
[zen-stable.git] / drivers / net / wireless / b43 / phy_a.h
blob5cfaab7b16ee8c1de47bec7838aa1ab0a679f485
1 #ifndef LINUX_B43_PHY_A_H_
2 #define LINUX_B43_PHY_A_H_
4 #include "phy_common.h"
7 /* OFDM (A) PHY Registers */
8 #define B43_PHY_VERSION_OFDM B43_PHY_OFDM(0x00) /* Versioning register for A-PHY */
9 #define B43_PHY_BBANDCFG B43_PHY_OFDM(0x01) /* Baseband config */
10 #define B43_PHY_BBANDCFG_RXANT 0x180 /* RX Antenna selection */
11 #define B43_PHY_BBANDCFG_RXANT_SHIFT 7
12 #define B43_PHY_PWRDOWN B43_PHY_OFDM(0x03) /* Powerdown */
13 #define B43_PHY_CRSTHRES1_R1 B43_PHY_OFDM(0x06) /* CRS Threshold 1 (phy.rev 1 only) */
14 #define B43_PHY_LNAHPFCTL B43_PHY_OFDM(0x1C) /* LNA/HPF control */
15 #define B43_PHY_LPFGAINCTL B43_PHY_OFDM(0x20) /* LPF Gain control */
16 #define B43_PHY_ADIVRELATED B43_PHY_OFDM(0x27) /* FIXME rename */
17 #define B43_PHY_CRS0 B43_PHY_OFDM(0x29)
18 #define B43_PHY_CRS0_EN 0x4000
19 #define B43_PHY_PEAK_COUNT B43_PHY_OFDM(0x30)
20 #define B43_PHY_ANTDWELL B43_PHY_OFDM(0x2B) /* Antenna dwell */
21 #define B43_PHY_ANTDWELL_AUTODIV1 0x0100 /* Automatic RX diversity start antenna */
22 #define B43_PHY_ENCORE B43_PHY_OFDM(0x49) /* "Encore" (RangeMax / BroadRange) */
23 #define B43_PHY_ENCORE_EN 0x0200 /* Encore enable */
24 #define B43_PHY_LMS B43_PHY_OFDM(0x55)
25 #define B43_PHY_OFDM61 B43_PHY_OFDM(0x61) /* FIXME rename */
26 #define B43_PHY_OFDM61_10 0x0010 /* FIXME rename */
27 #define B43_PHY_IQBAL B43_PHY_OFDM(0x69) /* I/Q balance */
28 #define B43_PHY_BBTXDC_BIAS B43_PHY_OFDM(0x6B) /* Baseband TX DC bias */
29 #define B43_PHY_OTABLECTL B43_PHY_OFDM(0x72) /* OFDM table control (see below) */
30 #define B43_PHY_OTABLEOFF 0x03FF /* OFDM table offset (see below) */
31 #define B43_PHY_OTABLENR 0xFC00 /* OFDM table number (see below) */
32 #define B43_PHY_OTABLENR_SHIFT 10
33 #define B43_PHY_OTABLEI B43_PHY_OFDM(0x73) /* OFDM table data I */
34 #define B43_PHY_OTABLEQ B43_PHY_OFDM(0x74) /* OFDM table data Q */
35 #define B43_PHY_HPWR_TSSICTL B43_PHY_OFDM(0x78) /* Hardware power TSSI control */
36 #define B43_PHY_ADCCTL B43_PHY_OFDM(0x7A) /* ADC control */
37 #define B43_PHY_IDLE_TSSI B43_PHY_OFDM(0x7B)
38 #define B43_PHY_A_TEMP_SENSE B43_PHY_OFDM(0x7C) /* A PHY temperature sense */
39 #define B43_PHY_NRSSITHRES B43_PHY_OFDM(0x8A) /* NRSSI threshold */
40 #define B43_PHY_ANTWRSETT B43_PHY_OFDM(0x8C) /* Antenna WR settle */
41 #define B43_PHY_ANTWRSETT_ARXDIV 0x2000 /* Automatic RX diversity enabled */
42 #define B43_PHY_CLIPPWRDOWNT B43_PHY_OFDM(0x93) /* Clip powerdown threshold */
43 #define B43_PHY_OFDM9B B43_PHY_OFDM(0x9B) /* FIXME rename */
44 #define B43_PHY_N1P1GAIN B43_PHY_OFDM(0xA0)
45 #define B43_PHY_P1P2GAIN B43_PHY_OFDM(0xA1)
46 #define B43_PHY_N1N2GAIN B43_PHY_OFDM(0xA2)
47 #define B43_PHY_CLIPTHRES B43_PHY_OFDM(0xA3)
48 #define B43_PHY_CLIPN1P2THRES B43_PHY_OFDM(0xA4)
49 #define B43_PHY_CCKSHIFTBITS_WA B43_PHY_OFDM(0xA5) /* CCK shiftbits workaround, FIXME rename */
50 #define B43_PHY_CCKSHIFTBITS B43_PHY_OFDM(0xA7) /* FIXME rename */
51 #define B43_PHY_DIVSRCHIDX B43_PHY_OFDM(0xA8) /* Divider search gain/index */
52 #define B43_PHY_CLIPP2THRES B43_PHY_OFDM(0xA9)
53 #define B43_PHY_CLIPP3THRES B43_PHY_OFDM(0xAA)
54 #define B43_PHY_DIVP1P2GAIN B43_PHY_OFDM(0xAB)
55 #define B43_PHY_DIVSRCHGAINBACK B43_PHY_OFDM(0xAD) /* Divider search gain back */
56 #define B43_PHY_DIVSRCHGAINCHNG B43_PHY_OFDM(0xAE) /* Divider search gain change */
57 #define B43_PHY_CRSTHRES1 B43_PHY_OFDM(0xC0) /* CRS Threshold 1 (phy.rev >= 2 only) */
58 #define B43_PHY_CRSTHRES2 B43_PHY_OFDM(0xC1) /* CRS Threshold 2 (phy.rev >= 2 only) */
59 #define B43_PHY_TSSIP_LTBASE B43_PHY_OFDM(0x380) /* TSSI power lookup table base */
60 #define B43_PHY_DC_LTBASE B43_PHY_OFDM(0x3A0) /* DC lookup table base */
61 #define B43_PHY_GAIN_LTBASE B43_PHY_OFDM(0x3C0) /* Gain lookup table base */
63 /*** OFDM table numbers ***/
64 #define B43_OFDMTAB(number, offset) (((number) << B43_PHY_OTABLENR_SHIFT) | (offset))
65 #define B43_OFDMTAB_AGC1 B43_OFDMTAB(0x00, 0)
66 #define B43_OFDMTAB_GAIN0 B43_OFDMTAB(0x00, 0)
67 #define B43_OFDMTAB_GAINX B43_OFDMTAB(0x01, 0) //TODO rename
68 #define B43_OFDMTAB_GAIN1 B43_OFDMTAB(0x01, 4)
69 #define B43_OFDMTAB_AGC3 B43_OFDMTAB(0x02, 0)
70 #define B43_OFDMTAB_GAIN2 B43_OFDMTAB(0x02, 3)
71 #define B43_OFDMTAB_LNAHPFGAIN1 B43_OFDMTAB(0x03, 0)
72 #define B43_OFDMTAB_WRSSI B43_OFDMTAB(0x04, 0)
73 #define B43_OFDMTAB_LNAHPFGAIN2 B43_OFDMTAB(0x04, 0)
74 #define B43_OFDMTAB_NOISESCALE B43_OFDMTAB(0x05, 0)
75 #define B43_OFDMTAB_AGC2 B43_OFDMTAB(0x06, 0)
76 #define B43_OFDMTAB_ROTOR B43_OFDMTAB(0x08, 0)
77 #define B43_OFDMTAB_ADVRETARD B43_OFDMTAB(0x09, 0)
78 #define B43_OFDMTAB_DAC B43_OFDMTAB(0x0C, 0)
79 #define B43_OFDMTAB_DC B43_OFDMTAB(0x0E, 7)
80 #define B43_OFDMTAB_PWRDYN2 B43_OFDMTAB(0x0E, 12)
81 #define B43_OFDMTAB_LNAGAIN B43_OFDMTAB(0x0E, 13)
82 #define B43_OFDMTAB_UNKNOWN_0F B43_OFDMTAB(0x0F, 0) //TODO rename
83 #define B43_OFDMTAB_UNKNOWN_APHY B43_OFDMTAB(0x0F, 7) //TODO rename
84 #define B43_OFDMTAB_LPFGAIN B43_OFDMTAB(0x0F, 12)
85 #define B43_OFDMTAB_RSSI B43_OFDMTAB(0x10, 0)
86 #define B43_OFDMTAB_UNKNOWN_11 B43_OFDMTAB(0x11, 4) //TODO rename
87 #define B43_OFDMTAB_AGC1_R1 B43_OFDMTAB(0x13, 0)
88 #define B43_OFDMTAB_GAINX_R1 B43_OFDMTAB(0x14, 0) //TODO remove!
89 #define B43_OFDMTAB_MINSIGSQ B43_OFDMTAB(0x14, 0)
90 #define B43_OFDMTAB_AGC3_R1 B43_OFDMTAB(0x15, 0)
91 #define B43_OFDMTAB_WRSSI_R1 B43_OFDMTAB(0x15, 4)
92 #define B43_OFDMTAB_TSSI B43_OFDMTAB(0x15, 0)
93 #define B43_OFDMTAB_DACRFPABB B43_OFDMTAB(0x16, 0)
94 #define B43_OFDMTAB_DACOFF B43_OFDMTAB(0x17, 0)
95 #define B43_OFDMTAB_DCBIAS B43_OFDMTAB(0x18, 0)
97 u16 b43_ofdmtab_read16(struct b43_wldev *dev, u16 table, u16 offset);
98 void b43_ofdmtab_write16(struct b43_wldev *dev, u16 table,
99 u16 offset, u16 value);
100 u32 b43_ofdmtab_read32(struct b43_wldev *dev, u16 table, u16 offset);
101 void b43_ofdmtab_write32(struct b43_wldev *dev, u16 table,
102 u16 offset, u32 value);
105 struct b43_phy_a {
106 /* Pointer to the table used to convert a
107 * TSSI value to dBm-Q5.2 */
108 const s8 *tssi2dbm;
109 /* Target idle TSSI */
110 int tgt_idle_tssi;
111 /* Current idle TSSI */
112 int cur_idle_tssi;//FIXME value currently not set
114 /* A-PHY TX Power control value. */
115 u16 txpwr_offset;
117 //TODO lots of missing stuff
121 * b43_phy_inita - Lowlevel A-PHY init routine.
122 * This is _only_ used by the G-PHY code.
124 void b43_phy_inita(struct b43_wldev *dev);
127 struct b43_phy_operations;
128 extern const struct b43_phy_operations b43_phyops_a;
130 #endif /* LINUX_B43_PHY_A_H_ */