2 * This file contains the major functions in WLAN
3 * driver. It includes init, exit, open, close and main
7 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
9 #include <linux/moduleparam.h>
10 #include <linux/delay.h>
11 #include <linux/etherdevice.h>
12 #include <linux/netdevice.h>
13 #include <linux/if_arp.h>
14 #include <linux/kthread.h>
15 #include <linux/kfifo.h>
16 #include <linux/slab.h>
17 #include <net/cfg80211.h>
26 #define DRIVER_RELEASE_VERSION "323.p0"
27 const char lbs_driver_version
[] = "COMM-USB8388-" DRIVER_RELEASE_VERSION
34 /* Module parameters */
35 unsigned int lbs_debug
;
36 EXPORT_SYMBOL_GPL(lbs_debug
);
37 module_param_named(libertas_debug
, lbs_debug
, int, 0644);
39 unsigned int lbs_disablemesh
;
40 EXPORT_SYMBOL_GPL(lbs_disablemesh
);
41 module_param_named(libertas_disablemesh
, lbs_disablemesh
, int, 0644);
45 * This global structure is used to send the confirm_sleep command as
46 * fast as possible down to the firmware.
48 struct cmd_confirm_sleep confirm_sleep
;
52 * the table to keep region code
54 u16 lbs_region_code_to_index
[MRVDRV_MAX_REGION_CODE
] =
55 { 0x10, 0x20, 0x30, 0x31, 0x32, 0x40 };
58 * FW rate table. FW refers to rates by their index in this table, not by the
59 * rate value itself. Values of 0x00 are
62 static u8 fw_data_rates
[MAX_RATES
] =
63 { 0x02, 0x04, 0x0B, 0x16, 0x00, 0x0C, 0x12,
64 0x18, 0x24, 0x30, 0x48, 0x60, 0x6C, 0x00
68 * lbs_fw_index_to_data_rate - use index to get the data rate
70 * @idx: The index of data rate
71 * returns: data rate or 0
73 u32
lbs_fw_index_to_data_rate(u8 idx
)
75 if (idx
>= sizeof(fw_data_rates
))
77 return fw_data_rates
[idx
];
81 * lbs_data_rate_to_fw_index - use rate to get the index
86 u8
lbs_data_rate_to_fw_index(u32 rate
)
93 for (i
= 0; i
< sizeof(fw_data_rates
); i
++) {
94 if (rate
== fw_data_rates
[i
])
102 * lbs_dev_open - open the ethX interface
104 * @dev: A pointer to &net_device structure
105 * returns: 0 or -EBUSY if monitor mode active
107 static int lbs_dev_open(struct net_device
*dev
)
109 struct lbs_private
*priv
= dev
->ml_priv
;
112 lbs_deb_enter(LBS_DEB_NET
);
114 spin_lock_irq(&priv
->driver_lock
);
115 priv
->stopping
= false;
117 if (priv
->connect_status
== LBS_CONNECTED
)
118 netif_carrier_on(dev
);
120 netif_carrier_off(dev
);
122 if (!priv
->tx_pending_len
)
123 netif_wake_queue(dev
);
125 spin_unlock_irq(&priv
->driver_lock
);
126 lbs_deb_leave_args(LBS_DEB_NET
, "ret %d", ret
);
131 * lbs_eth_stop - close the ethX interface
133 * @dev: A pointer to &net_device structure
136 static int lbs_eth_stop(struct net_device
*dev
)
138 struct lbs_private
*priv
= dev
->ml_priv
;
140 lbs_deb_enter(LBS_DEB_NET
);
142 spin_lock_irq(&priv
->driver_lock
);
143 priv
->stopping
= true;
144 netif_stop_queue(dev
);
145 spin_unlock_irq(&priv
->driver_lock
);
147 schedule_work(&priv
->mcast_work
);
148 cancel_delayed_work_sync(&priv
->scan_work
);
149 if (priv
->scan_req
) {
150 cfg80211_scan_done(priv
->scan_req
, false);
151 priv
->scan_req
= NULL
;
154 lbs_deb_leave(LBS_DEB_NET
);
158 void lbs_host_to_card_done(struct lbs_private
*priv
)
162 lbs_deb_enter(LBS_DEB_THREAD
);
164 spin_lock_irqsave(&priv
->driver_lock
, flags
);
166 priv
->dnld_sent
= DNLD_RES_RECEIVED
;
168 /* Wake main thread if commands are pending */
169 if (!priv
->cur_cmd
|| priv
->tx_pending_len
> 0) {
170 if (!priv
->wakeup_dev_required
)
171 wake_up_interruptible(&priv
->waitq
);
174 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
175 lbs_deb_leave(LBS_DEB_THREAD
);
177 EXPORT_SYMBOL_GPL(lbs_host_to_card_done
);
179 int lbs_set_mac_address(struct net_device
*dev
, void *addr
)
182 struct lbs_private
*priv
= dev
->ml_priv
;
183 struct sockaddr
*phwaddr
= addr
;
184 struct cmd_ds_802_11_mac_address cmd
;
186 lbs_deb_enter(LBS_DEB_NET
);
188 /* In case it was called from the mesh device */
191 cmd
.hdr
.size
= cpu_to_le16(sizeof(cmd
));
192 cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
193 memcpy(cmd
.macadd
, phwaddr
->sa_data
, ETH_ALEN
);
195 ret
= lbs_cmd_with_response(priv
, CMD_802_11_MAC_ADDRESS
, &cmd
);
197 lbs_deb_net("set MAC address failed\n");
201 memcpy(priv
->current_addr
, phwaddr
->sa_data
, ETH_ALEN
);
202 memcpy(dev
->dev_addr
, phwaddr
->sa_data
, ETH_ALEN
);
204 memcpy(priv
->mesh_dev
->dev_addr
, phwaddr
->sa_data
, ETH_ALEN
);
207 lbs_deb_leave_args(LBS_DEB_NET
, "ret %d", ret
);
212 static inline int mac_in_list(unsigned char *list
, int list_len
,
216 if (!memcmp(list
, mac
, ETH_ALEN
))
225 static int lbs_add_mcast_addrs(struct cmd_ds_mac_multicast_adr
*cmd
,
226 struct net_device
*dev
, int nr_addrs
)
229 struct netdev_hw_addr
*ha
;
232 if ((dev
->flags
& (IFF_UP
|IFF_MULTICAST
)) != (IFF_UP
|IFF_MULTICAST
))
235 netif_addr_lock_bh(dev
);
236 cnt
= netdev_mc_count(dev
);
237 netdev_for_each_mc_addr(ha
, dev
) {
238 if (mac_in_list(cmd
->maclist
, nr_addrs
, ha
->addr
)) {
239 lbs_deb_net("mcast address %s:%pM skipped\n", dev
->name
,
245 if (i
== MRVDRV_MAX_MULTICAST_LIST_SIZE
)
247 memcpy(&cmd
->maclist
[6*i
], ha
->addr
, ETH_ALEN
);
248 lbs_deb_net("mcast address %s:%pM added to filter\n", dev
->name
,
253 netif_addr_unlock_bh(dev
);
260 static void lbs_set_mcast_worker(struct work_struct
*work
)
262 struct lbs_private
*priv
= container_of(work
, struct lbs_private
, mcast_work
);
263 struct cmd_ds_mac_multicast_adr mcast_cmd
;
266 int old_mac_control
= priv
->mac_control
;
268 lbs_deb_enter(LBS_DEB_NET
);
270 dev_flags
= priv
->dev
->flags
;
272 dev_flags
|= priv
->mesh_dev
->flags
;
274 if (dev_flags
& IFF_PROMISC
) {
275 priv
->mac_control
|= CMD_ACT_MAC_PROMISCUOUS_ENABLE
;
276 priv
->mac_control
&= ~(CMD_ACT_MAC_ALL_MULTICAST_ENABLE
|
277 CMD_ACT_MAC_MULTICAST_ENABLE
);
278 goto out_set_mac_control
;
279 } else if (dev_flags
& IFF_ALLMULTI
) {
281 priv
->mac_control
|= CMD_ACT_MAC_ALL_MULTICAST_ENABLE
;
282 priv
->mac_control
&= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE
|
283 CMD_ACT_MAC_MULTICAST_ENABLE
);
284 goto out_set_mac_control
;
287 /* Once for priv->dev, again for priv->mesh_dev if it exists */
288 nr_addrs
= lbs_add_mcast_addrs(&mcast_cmd
, priv
->dev
, 0);
289 if (nr_addrs
>= 0 && priv
->mesh_dev
)
290 nr_addrs
= lbs_add_mcast_addrs(&mcast_cmd
, priv
->mesh_dev
, nr_addrs
);
295 int size
= offsetof(struct cmd_ds_mac_multicast_adr
,
296 maclist
[6*nr_addrs
]);
298 mcast_cmd
.action
= cpu_to_le16(CMD_ACT_SET
);
299 mcast_cmd
.hdr
.size
= cpu_to_le16(size
);
300 mcast_cmd
.nr_of_adrs
= cpu_to_le16(nr_addrs
);
302 lbs_cmd_async(priv
, CMD_MAC_MULTICAST_ADR
, &mcast_cmd
.hdr
, size
);
304 priv
->mac_control
|= CMD_ACT_MAC_MULTICAST_ENABLE
;
306 priv
->mac_control
&= ~CMD_ACT_MAC_MULTICAST_ENABLE
;
308 priv
->mac_control
&= ~(CMD_ACT_MAC_PROMISCUOUS_ENABLE
|
309 CMD_ACT_MAC_ALL_MULTICAST_ENABLE
);
311 if (priv
->mac_control
!= old_mac_control
)
312 lbs_set_mac_control(priv
);
314 lbs_deb_leave(LBS_DEB_NET
);
317 void lbs_set_multicast_list(struct net_device
*dev
)
319 struct lbs_private
*priv
= dev
->ml_priv
;
321 schedule_work(&priv
->mcast_work
);
325 * lbs_thread - handles the major jobs in the LBS driver.
326 * It handles all events generated by firmware, RX data received
327 * from firmware and TX data sent from kernel.
329 * @data: A pointer to &lbs_thread structure
332 static int lbs_thread(void *data
)
334 struct net_device
*dev
= data
;
335 struct lbs_private
*priv
= dev
->ml_priv
;
338 lbs_deb_enter(LBS_DEB_THREAD
);
340 init_waitqueue_entry(&wait
, current
);
346 lbs_deb_thread("1: currenttxskb %p, dnld_sent %d\n",
347 priv
->currenttxskb
, priv
->dnld_sent
);
349 add_wait_queue(&priv
->waitq
, &wait
);
350 set_current_state(TASK_INTERRUPTIBLE
);
351 spin_lock_irq(&priv
->driver_lock
);
353 if (kthread_should_stop())
354 shouldsleep
= 0; /* Bye */
355 else if (priv
->surpriseremoved
)
356 shouldsleep
= 1; /* We need to wait until we're _told_ to die */
357 else if (priv
->psstate
== PS_STATE_SLEEP
)
358 shouldsleep
= 1; /* Sleep mode. Nothing we can do till it wakes */
359 else if (priv
->cmd_timed_out
)
360 shouldsleep
= 0; /* Command timed out. Recover */
361 else if (!priv
->fw_ready
)
362 shouldsleep
= 1; /* Firmware not ready. We're waiting for it */
363 else if (priv
->dnld_sent
)
364 shouldsleep
= 1; /* Something is en route to the device already */
365 else if (priv
->tx_pending_len
> 0)
366 shouldsleep
= 0; /* We've a packet to send */
367 else if (priv
->resp_len
[priv
->resp_idx
])
368 shouldsleep
= 0; /* We have a command response */
369 else if (priv
->cur_cmd
)
370 shouldsleep
= 1; /* Can't send a command; one already running */
371 else if (!list_empty(&priv
->cmdpendingq
) &&
372 !(priv
->wakeup_dev_required
))
373 shouldsleep
= 0; /* We have a command to send */
374 else if (kfifo_len(&priv
->event_fifo
))
375 shouldsleep
= 0; /* We have an event to process */
377 shouldsleep
= 1; /* No command */
380 lbs_deb_thread("sleeping, connect_status %d, "
381 "psmode %d, psstate %d\n",
382 priv
->connect_status
,
383 priv
->psmode
, priv
->psstate
);
384 spin_unlock_irq(&priv
->driver_lock
);
387 spin_unlock_irq(&priv
->driver_lock
);
389 lbs_deb_thread("2: currenttxskb %p, dnld_send %d\n",
390 priv
->currenttxskb
, priv
->dnld_sent
);
392 set_current_state(TASK_RUNNING
);
393 remove_wait_queue(&priv
->waitq
, &wait
);
395 lbs_deb_thread("3: currenttxskb %p, dnld_sent %d\n",
396 priv
->currenttxskb
, priv
->dnld_sent
);
398 if (kthread_should_stop()) {
399 lbs_deb_thread("break from main thread\n");
403 if (priv
->surpriseremoved
) {
404 lbs_deb_thread("adapter removed; waiting to die...\n");
408 lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n",
409 priv
->currenttxskb
, priv
->dnld_sent
);
411 /* Process any pending command response */
412 spin_lock_irq(&priv
->driver_lock
);
413 resp_idx
= priv
->resp_idx
;
414 if (priv
->resp_len
[resp_idx
]) {
415 spin_unlock_irq(&priv
->driver_lock
);
416 lbs_process_command_response(priv
,
417 priv
->resp_buf
[resp_idx
],
418 priv
->resp_len
[resp_idx
]);
419 spin_lock_irq(&priv
->driver_lock
);
420 priv
->resp_len
[resp_idx
] = 0;
422 spin_unlock_irq(&priv
->driver_lock
);
424 /* Process hardware events, e.g. card removed, link lost */
425 spin_lock_irq(&priv
->driver_lock
);
426 while (kfifo_len(&priv
->event_fifo
)) {
429 if (kfifo_out(&priv
->event_fifo
,
430 (unsigned char *) &event
, sizeof(event
)) !=
433 spin_unlock_irq(&priv
->driver_lock
);
434 lbs_process_event(priv
, event
);
435 spin_lock_irq(&priv
->driver_lock
);
437 spin_unlock_irq(&priv
->driver_lock
);
439 if (priv
->wakeup_dev_required
) {
440 lbs_deb_thread("Waking up device...\n");
442 if (priv
->exit_deep_sleep(priv
))
443 lbs_deb_thread("Wakeup device failed\n");
447 /* command timeout stuff */
448 if (priv
->cmd_timed_out
&& priv
->cur_cmd
) {
449 struct cmd_ctrl_node
*cmdnode
= priv
->cur_cmd
;
451 netdev_info(dev
, "Timeout submitting command 0x%04x\n",
452 le16_to_cpu(cmdnode
->cmdbuf
->command
));
453 lbs_complete_command(priv
, cmdnode
, -ETIMEDOUT
);
454 if (priv
->reset_card
)
455 priv
->reset_card(priv
);
457 priv
->cmd_timed_out
= 0;
462 /* Check if we need to confirm Sleep Request received previously */
463 if (priv
->psstate
== PS_STATE_PRE_SLEEP
&&
464 !priv
->dnld_sent
&& !priv
->cur_cmd
) {
465 if (priv
->connect_status
== LBS_CONNECTED
) {
466 lbs_deb_thread("pre-sleep, currenttxskb %p, "
467 "dnld_sent %d, cur_cmd %p\n",
468 priv
->currenttxskb
, priv
->dnld_sent
,
471 lbs_ps_confirm_sleep(priv
);
473 /* workaround for firmware sending
474 * deauth/linkloss event immediately
475 * after sleep request; remove this
476 * after firmware fixes it
478 priv
->psstate
= PS_STATE_AWAKE
;
480 "ignore PS_SleepConfirm in non-connected state\n");
484 /* The PS state is changed during processing of Sleep Request
487 if ((priv
->psstate
== PS_STATE_SLEEP
) ||
488 (priv
->psstate
== PS_STATE_PRE_SLEEP
))
491 if (priv
->is_deep_sleep
)
494 /* Execute the next command */
495 if (!priv
->dnld_sent
&& !priv
->cur_cmd
)
496 lbs_execute_next_command(priv
);
498 spin_lock_irq(&priv
->driver_lock
);
499 if (!priv
->dnld_sent
&& priv
->tx_pending_len
> 0) {
500 int ret
= priv
->hw_host_to_card(priv
, MVMS_DAT
,
501 priv
->tx_pending_buf
,
502 priv
->tx_pending_len
);
504 lbs_deb_tx("host_to_card failed %d\n", ret
);
505 priv
->dnld_sent
= DNLD_RES_RECEIVED
;
507 priv
->tx_pending_len
= 0;
508 if (!priv
->currenttxskb
) {
509 /* We can wake the queues immediately if we aren't
510 waiting for TX feedback */
511 if (priv
->connect_status
== LBS_CONNECTED
)
512 netif_wake_queue(priv
->dev
);
513 if (priv
->mesh_dev
&&
514 lbs_mesh_connected(priv
))
515 netif_wake_queue(priv
->mesh_dev
);
518 spin_unlock_irq(&priv
->driver_lock
);
521 del_timer(&priv
->command_timer
);
522 del_timer(&priv
->auto_deepsleep_timer
);
524 lbs_deb_leave(LBS_DEB_THREAD
);
529 * lbs_setup_firmware - gets the HW spec from the firmware and sets
530 * some basic parameters
532 * @priv: A pointer to &struct lbs_private structure
535 static int lbs_setup_firmware(struct lbs_private
*priv
)
538 s16 curlevel
= 0, minlevel
= 0, maxlevel
= 0;
540 lbs_deb_enter(LBS_DEB_FW
);
542 /* Read MAC address from firmware */
543 memset(priv
->current_addr
, 0xff, ETH_ALEN
);
544 ret
= lbs_update_hw_spec(priv
);
548 /* Read power levels if available */
549 ret
= lbs_get_tx_power(priv
, &curlevel
, &minlevel
, &maxlevel
);
551 priv
->txpower_cur
= curlevel
;
552 priv
->txpower_min
= minlevel
;
553 priv
->txpower_max
= maxlevel
;
556 /* Send cmd to FW to enable 11D function */
557 ret
= lbs_set_snmp_mib(priv
, SNMP_MIB_OID_11D_ENABLE
, 1);
559 lbs_set_mac_control(priv
);
561 lbs_deb_leave_args(LBS_DEB_FW
, "ret %d", ret
);
565 int lbs_suspend(struct lbs_private
*priv
)
569 lbs_deb_enter(LBS_DEB_FW
);
571 if (priv
->is_deep_sleep
) {
572 ret
= lbs_set_deep_sleep(priv
, 0);
574 netdev_err(priv
->dev
,
575 "deep sleep cancellation failed: %d\n", ret
);
578 priv
->deep_sleep_required
= 1;
581 ret
= lbs_set_host_sleep(priv
, 1);
583 netif_device_detach(priv
->dev
);
585 netif_device_detach(priv
->mesh_dev
);
587 lbs_deb_leave_args(LBS_DEB_FW
, "ret %d", ret
);
590 EXPORT_SYMBOL_GPL(lbs_suspend
);
592 int lbs_resume(struct lbs_private
*priv
)
596 lbs_deb_enter(LBS_DEB_FW
);
598 ret
= lbs_set_host_sleep(priv
, 0);
600 netif_device_attach(priv
->dev
);
602 netif_device_attach(priv
->mesh_dev
);
604 if (priv
->deep_sleep_required
) {
605 priv
->deep_sleep_required
= 0;
606 ret
= lbs_set_deep_sleep(priv
, 1);
608 netdev_err(priv
->dev
,
609 "deep sleep activation failed: %d\n", ret
);
612 if (priv
->setup_fw_on_resume
)
613 ret
= lbs_setup_firmware(priv
);
615 lbs_deb_leave_args(LBS_DEB_FW
, "ret %d", ret
);
618 EXPORT_SYMBOL_GPL(lbs_resume
);
621 * lbs_cmd_timeout_handler - handles the timeout of command sending.
622 * It will re-send the same command again.
624 * @data: &struct lbs_private pointer
626 static void lbs_cmd_timeout_handler(unsigned long data
)
628 struct lbs_private
*priv
= (struct lbs_private
*)data
;
631 lbs_deb_enter(LBS_DEB_CMD
);
632 spin_lock_irqsave(&priv
->driver_lock
, flags
);
637 netdev_info(priv
->dev
, "command 0x%04x timed out\n",
638 le16_to_cpu(priv
->cur_cmd
->cmdbuf
->command
));
640 priv
->cmd_timed_out
= 1;
641 wake_up_interruptible(&priv
->waitq
);
643 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
644 lbs_deb_leave(LBS_DEB_CMD
);
648 * auto_deepsleep_timer_fn - put the device back to deep sleep mode when
649 * timer expires and no activity (command, event, data etc.) is detected.
650 * @data: &struct lbs_private pointer
653 static void auto_deepsleep_timer_fn(unsigned long data
)
655 struct lbs_private
*priv
= (struct lbs_private
*)data
;
657 lbs_deb_enter(LBS_DEB_CMD
);
659 if (priv
->is_activity_detected
) {
660 priv
->is_activity_detected
= 0;
662 if (priv
->is_auto_deep_sleep_enabled
&&
663 (!priv
->wakeup_dev_required
) &&
664 (priv
->connect_status
!= LBS_CONNECTED
)) {
665 struct cmd_header cmd
;
667 lbs_deb_main("Entering auto deep sleep mode...\n");
668 memset(&cmd
, 0, sizeof(cmd
));
669 cmd
.size
= cpu_to_le16(sizeof(cmd
));
670 lbs_cmd_async(priv
, CMD_802_11_DEEP_SLEEP
, &cmd
,
674 mod_timer(&priv
->auto_deepsleep_timer
, jiffies
+
675 (priv
->auto_deep_sleep_timeout
* HZ
)/1000);
676 lbs_deb_leave(LBS_DEB_CMD
);
679 int lbs_enter_auto_deep_sleep(struct lbs_private
*priv
)
681 lbs_deb_enter(LBS_DEB_SDIO
);
683 priv
->is_auto_deep_sleep_enabled
= 1;
684 if (priv
->is_deep_sleep
)
685 priv
->wakeup_dev_required
= 1;
686 mod_timer(&priv
->auto_deepsleep_timer
,
687 jiffies
+ (priv
->auto_deep_sleep_timeout
* HZ
)/1000);
689 lbs_deb_leave(LBS_DEB_SDIO
);
693 int lbs_exit_auto_deep_sleep(struct lbs_private
*priv
)
695 lbs_deb_enter(LBS_DEB_SDIO
);
697 priv
->is_auto_deep_sleep_enabled
= 0;
698 priv
->auto_deep_sleep_timeout
= 0;
699 del_timer(&priv
->auto_deepsleep_timer
);
701 lbs_deb_leave(LBS_DEB_SDIO
);
705 static int lbs_init_adapter(struct lbs_private
*priv
)
709 lbs_deb_enter(LBS_DEB_MAIN
);
711 memset(priv
->current_addr
, 0xff, ETH_ALEN
);
713 priv
->connect_status
= LBS_DISCONNECTED
;
714 priv
->channel
= DEFAULT_AD_HOC_CHANNEL
;
715 priv
->mac_control
= CMD_ACT_MAC_RX_ON
| CMD_ACT_MAC_TX_ON
;
717 priv
->psmode
= LBS802_11POWERMODECAM
;
718 priv
->psstate
= PS_STATE_FULL_POWER
;
719 priv
->is_deep_sleep
= 0;
720 priv
->is_auto_deep_sleep_enabled
= 0;
721 priv
->deep_sleep_required
= 0;
722 priv
->wakeup_dev_required
= 0;
723 init_waitqueue_head(&priv
->ds_awake_q
);
724 init_waitqueue_head(&priv
->scan_q
);
725 priv
->authtype_auto
= 1;
726 priv
->is_host_sleep_configured
= 0;
727 priv
->is_host_sleep_activated
= 0;
728 init_waitqueue_head(&priv
->host_sleep_q
);
729 mutex_init(&priv
->lock
);
731 setup_timer(&priv
->command_timer
, lbs_cmd_timeout_handler
,
732 (unsigned long)priv
);
733 setup_timer(&priv
->auto_deepsleep_timer
, auto_deepsleep_timer_fn
,
734 (unsigned long)priv
);
736 INIT_LIST_HEAD(&priv
->cmdfreeq
);
737 INIT_LIST_HEAD(&priv
->cmdpendingq
);
739 spin_lock_init(&priv
->driver_lock
);
741 /* Allocate the command buffers */
742 if (lbs_allocate_cmd_buffer(priv
)) {
743 pr_err("Out of memory allocating command buffers\n");
748 priv
->resp_len
[0] = priv
->resp_len
[1] = 0;
750 /* Create the event FIFO */
751 ret
= kfifo_alloc(&priv
->event_fifo
, sizeof(u32
) * 16, GFP_KERNEL
);
753 pr_err("Out of memory allocating event FIFO buffer\n");
758 lbs_deb_leave_args(LBS_DEB_MAIN
, "ret %d", ret
);
763 static void lbs_free_adapter(struct lbs_private
*priv
)
765 lbs_deb_enter(LBS_DEB_MAIN
);
767 lbs_free_cmd_buffer(priv
);
768 kfifo_free(&priv
->event_fifo
);
769 del_timer(&priv
->command_timer
);
770 del_timer(&priv
->auto_deepsleep_timer
);
772 lbs_deb_leave(LBS_DEB_MAIN
);
775 static const struct net_device_ops lbs_netdev_ops
= {
776 .ndo_open
= lbs_dev_open
,
777 .ndo_stop
= lbs_eth_stop
,
778 .ndo_start_xmit
= lbs_hard_start_xmit
,
779 .ndo_set_mac_address
= lbs_set_mac_address
,
780 .ndo_set_multicast_list
= lbs_set_multicast_list
,
781 .ndo_change_mtu
= eth_change_mtu
,
782 .ndo_validate_addr
= eth_validate_addr
,
786 * lbs_add_card - adds the card. It will probe the
787 * card, allocate the lbs_priv and initialize the device.
789 * @card: A pointer to card
790 * @dmdev: A pointer to &struct device
791 * returns: A pointer to &struct lbs_private structure
793 struct lbs_private
*lbs_add_card(void *card
, struct device
*dmdev
)
795 struct net_device
*dev
;
796 struct wireless_dev
*wdev
;
797 struct lbs_private
*priv
= NULL
;
799 lbs_deb_enter(LBS_DEB_MAIN
);
801 /* Allocate an Ethernet device and register it */
802 wdev
= lbs_cfg_alloc(dmdev
);
804 pr_err("cfg80211 init failed\n");
808 wdev
->iftype
= NL80211_IFTYPE_STATION
;
809 priv
= wdev_priv(wdev
);
812 if (lbs_init_adapter(priv
)) {
813 pr_err("failed to initialize adapter structure\n");
817 dev
= alloc_netdev(0, "wlan%d", ether_setup
);
819 dev_err(dmdev
, "no memory for network device instance\n");
823 dev
->ieee80211_ptr
= wdev
;
825 SET_NETDEV_DEV(dev
, dmdev
);
829 dev
->netdev_ops
= &lbs_netdev_ops
;
830 dev
->watchdog_timeo
= 5 * HZ
;
831 dev
->ethtool_ops
= &lbs_ethtool_ops
;
832 dev
->flags
|= IFF_BROADCAST
| IFF_MULTICAST
;
836 strcpy(dev
->name
, "wlan%d");
838 lbs_deb_thread("Starting main thread...\n");
839 init_waitqueue_head(&priv
->waitq
);
840 priv
->main_thread
= kthread_run(lbs_thread
, dev
, "lbs_main");
841 if (IS_ERR(priv
->main_thread
)) {
842 lbs_deb_thread("Error creating main thread.\n");
846 priv
->work_thread
= create_singlethread_workqueue("lbs_worker");
847 INIT_WORK(&priv
->mcast_work
, lbs_set_mcast_worker
);
849 priv
->wol_criteria
= EHS_REMOVE_WAKEUP
;
850 priv
->wol_gpio
= 0xff;
852 priv
->ehs_remove_supported
= true;
860 lbs_free_adapter(priv
);
868 lbs_deb_leave_args(LBS_DEB_MAIN
, "priv %p", priv
);
871 EXPORT_SYMBOL_GPL(lbs_add_card
);
874 void lbs_remove_card(struct lbs_private
*priv
)
876 struct net_device
*dev
= priv
->dev
;
878 lbs_deb_enter(LBS_DEB_MAIN
);
880 lbs_remove_mesh(priv
);
881 lbs_scan_deinit(priv
);
885 cancel_work_sync(&priv
->mcast_work
);
887 /* worker thread destruction blocks on the in-flight command which
888 * should have been cleared already in lbs_stop_card().
890 lbs_deb_main("destroying worker thread\n");
891 destroy_workqueue(priv
->work_thread
);
892 lbs_deb_main("done destroying worker thread\n");
894 if (priv
->psmode
== LBS802_11POWERMODEMAX_PSP
) {
895 priv
->psmode
= LBS802_11POWERMODECAM
;
896 lbs_set_ps_mode(priv
, PS_MODE_ACTION_EXIT_PS
, true);
899 if (priv
->is_deep_sleep
) {
900 priv
->is_deep_sleep
= 0;
901 wake_up_interruptible(&priv
->ds_awake_q
);
904 priv
->is_host_sleep_configured
= 0;
905 priv
->is_host_sleep_activated
= 0;
906 wake_up_interruptible(&priv
->host_sleep_q
);
908 /* Stop the thread servicing the interrupts */
909 priv
->surpriseremoved
= 1;
910 kthread_stop(priv
->main_thread
);
912 lbs_free_adapter(priv
);
916 lbs_deb_leave(LBS_DEB_MAIN
);
918 EXPORT_SYMBOL_GPL(lbs_remove_card
);
921 int lbs_rtap_supported(struct lbs_private
*priv
)
923 if (MRVL_FW_MAJOR_REV(priv
->fwrelease
) == MRVL_FW_V5
)
926 /* newer firmware use a capability mask */
927 return ((MRVL_FW_MAJOR_REV(priv
->fwrelease
) >= MRVL_FW_V10
) &&
928 (priv
->fwcapinfo
& MESH_CAPINFO_ENABLE_MASK
));
932 int lbs_start_card(struct lbs_private
*priv
)
934 struct net_device
*dev
= priv
->dev
;
937 lbs_deb_enter(LBS_DEB_MAIN
);
939 /* poke the firmware */
940 ret
= lbs_setup_firmware(priv
);
944 if (lbs_cfg_register(priv
)) {
945 pr_err("cannot register device\n");
949 lbs_update_channel(priv
);
951 if (!lbs_disablemesh
)
954 pr_info("%s: mesh disabled\n", dev
->name
);
956 lbs_debugfs_init_one(priv
, dev
);
958 netdev_info(dev
, "Marvell WLAN 802.11 adapter\n");
963 lbs_deb_leave_args(LBS_DEB_MAIN
, "ret %d", ret
);
966 EXPORT_SYMBOL_GPL(lbs_start_card
);
969 void lbs_stop_card(struct lbs_private
*priv
)
971 struct net_device
*dev
;
972 struct cmd_ctrl_node
*cmdnode
;
975 lbs_deb_enter(LBS_DEB_MAIN
);
981 netif_stop_queue(dev
);
982 netif_carrier_off(dev
);
984 lbs_debugfs_remove_one(priv
);
985 lbs_deinit_mesh(priv
);
987 /* Delete the timeout of the currently processing command */
988 del_timer_sync(&priv
->command_timer
);
989 del_timer_sync(&priv
->auto_deepsleep_timer
);
991 /* Flush pending command nodes */
992 spin_lock_irqsave(&priv
->driver_lock
, flags
);
993 lbs_deb_main("clearing pending commands\n");
994 list_for_each_entry(cmdnode
, &priv
->cmdpendingq
, list
) {
995 cmdnode
->result
= -ENOENT
;
996 cmdnode
->cmdwaitqwoken
= 1;
997 wake_up_interruptible(&cmdnode
->cmdwait_q
);
1000 /* Flush the command the card is currently processing */
1001 if (priv
->cur_cmd
) {
1002 lbs_deb_main("clearing current command\n");
1003 priv
->cur_cmd
->result
= -ENOENT
;
1004 priv
->cur_cmd
->cmdwaitqwoken
= 1;
1005 wake_up_interruptible(&priv
->cur_cmd
->cmdwait_q
);
1007 lbs_deb_main("done clearing commands\n");
1008 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1010 unregister_netdev(dev
);
1013 lbs_deb_leave(LBS_DEB_MAIN
);
1015 EXPORT_SYMBOL_GPL(lbs_stop_card
);
1018 void lbs_queue_event(struct lbs_private
*priv
, u32 event
)
1020 unsigned long flags
;
1022 lbs_deb_enter(LBS_DEB_THREAD
);
1023 spin_lock_irqsave(&priv
->driver_lock
, flags
);
1025 if (priv
->psstate
== PS_STATE_SLEEP
)
1026 priv
->psstate
= PS_STATE_AWAKE
;
1028 kfifo_in(&priv
->event_fifo
, (unsigned char *) &event
, sizeof(u32
));
1030 wake_up_interruptible(&priv
->waitq
);
1032 spin_unlock_irqrestore(&priv
->driver_lock
, flags
);
1033 lbs_deb_leave(LBS_DEB_THREAD
);
1035 EXPORT_SYMBOL_GPL(lbs_queue_event
);
1037 void lbs_notify_command_response(struct lbs_private
*priv
, u8 resp_idx
)
1039 lbs_deb_enter(LBS_DEB_THREAD
);
1041 if (priv
->psstate
== PS_STATE_SLEEP
)
1042 priv
->psstate
= PS_STATE_AWAKE
;
1044 /* Swap buffers by flipping the response index */
1045 BUG_ON(resp_idx
> 1);
1046 priv
->resp_idx
= resp_idx
;
1048 wake_up_interruptible(&priv
->waitq
);
1050 lbs_deb_leave(LBS_DEB_THREAD
);
1052 EXPORT_SYMBOL_GPL(lbs_notify_command_response
);
1055 * lbs_get_firmware - Retrieves two-stage firmware
1057 * @dev: A pointer to &device structure
1058 * @user_helper: User-defined helper firmware file
1059 * @user_mainfw: User-defined main firmware file
1060 * @card_model: Bus-specific card model ID used to filter firmware table
1062 * @fw_table: Table of firmware file names and device model numbers
1063 * terminated by an entry with a NULL helper name
1064 * @helper: On success, the helper firmware; caller must free
1065 * @mainfw: On success, the main firmware; caller must free
1067 * returns: 0 on success, non-zero on failure
1069 int lbs_get_firmware(struct device
*dev
, const char *user_helper
,
1070 const char *user_mainfw
, u32 card_model
,
1071 const struct lbs_fw_table
*fw_table
,
1072 const struct firmware
**helper
,
1073 const struct firmware
**mainfw
)
1075 const struct lbs_fw_table
*iter
;
1078 BUG_ON(helper
== NULL
);
1079 BUG_ON(mainfw
== NULL
);
1081 /* Try user-specified firmware first */
1083 ret
= request_firmware(helper
, user_helper
, dev
);
1085 dev_err(dev
, "couldn't find helper firmware %s\n",
1091 ret
= request_firmware(mainfw
, user_mainfw
, dev
);
1093 dev_err(dev
, "couldn't find main firmware %s\n",
1099 if (*helper
&& *mainfw
)
1102 /* Otherwise search for firmware to use. If neither the helper or
1103 * the main firmware were specified by the user, then we need to
1104 * make sure that found helper & main are from the same entry in
1108 while (iter
&& iter
->helper
) {
1109 if (iter
->model
!= card_model
)
1112 if (*helper
== NULL
) {
1113 ret
= request_firmware(helper
, iter
->helper
, dev
);
1117 /* If the device has one-stage firmware (ie cf8305) and
1118 * we've got it then we don't need to bother with the
1121 if (iter
->fwname
== NULL
)
1125 if (*mainfw
== NULL
) {
1126 ret
= request_firmware(mainfw
, iter
->fwname
, dev
);
1127 if (ret
&& !user_helper
) {
1128 /* Clear the helper if it wasn't user-specified
1129 * and the main firmware load failed, to ensure
1130 * we don't have mismatched firmware pairs.
1132 release_firmware(*helper
);
1137 if (*helper
&& *mainfw
)
1147 release_firmware(*helper
);
1151 release_firmware(*mainfw
);
1157 EXPORT_SYMBOL_GPL(lbs_get_firmware
);
1159 static int __init
lbs_init_module(void)
1161 lbs_deb_enter(LBS_DEB_MAIN
);
1162 memset(&confirm_sleep
, 0, sizeof(confirm_sleep
));
1163 confirm_sleep
.hdr
.command
= cpu_to_le16(CMD_802_11_PS_MODE
);
1164 confirm_sleep
.hdr
.size
= cpu_to_le16(sizeof(confirm_sleep
));
1165 confirm_sleep
.action
= cpu_to_le16(PS_MODE_ACTION_SLEEP_CONFIRMED
);
1167 lbs_deb_leave(LBS_DEB_MAIN
);
1171 static void __exit
lbs_exit_module(void)
1173 lbs_deb_enter(LBS_DEB_MAIN
);
1174 lbs_debugfs_remove();
1175 lbs_deb_leave(LBS_DEB_MAIN
);
1178 module_init(lbs_init_module
);
1179 module_exit(lbs_exit_module
);
1181 MODULE_DESCRIPTION("Libertas WLAN Driver Library");
1182 MODULE_AUTHOR("Marvell International Ltd.");
1183 MODULE_LICENSE("GPL");