2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com>
3 <http://rt2x00.serialmonkey.com>
5 This program is free software; you can redistribute it and/or modify
6 it under the terms of the GNU General Public License as published by
7 the Free Software Foundation; either version 2 of the License, or
8 (at your option) any later version.
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
15 You should have received a copy of the GNU General Public License
16 along with this program; if not, write to the
17 Free Software Foundation, Inc.,
18 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
23 Abstract: rt2x00 generic configuration routines.
26 #include <linux/kernel.h>
27 #include <linux/module.h>
30 #include "rt2x00lib.h"
32 void rt2x00lib_config_intf(struct rt2x00_dev
*rt2x00dev
,
33 struct rt2x00_intf
*intf
,
34 enum nl80211_iftype type
,
35 const u8
*mac
, const u8
*bssid
)
37 struct rt2x00intf_conf conf
;
38 unsigned int flags
= 0;
43 case NL80211_IFTYPE_ADHOC
:
44 conf
.sync
= TSF_SYNC_ADHOC
;
46 case NL80211_IFTYPE_AP
:
47 case NL80211_IFTYPE_MESH_POINT
:
48 case NL80211_IFTYPE_WDS
:
49 conf
.sync
= TSF_SYNC_AP_NONE
;
51 case NL80211_IFTYPE_STATION
:
52 conf
.sync
= TSF_SYNC_INFRA
;
55 conf
.sync
= TSF_SYNC_NONE
;
60 * Note that when NULL is passed as address we will send
61 * 00:00:00:00:00 to the device to clear the address.
62 * This will prevent the device being confused when it wants
63 * to ACK frames or considers itself associated.
65 memset(conf
.mac
, 0, sizeof(conf
.mac
));
67 memcpy(conf
.mac
, mac
, ETH_ALEN
);
69 memset(conf
.bssid
, 0, sizeof(conf
.bssid
));
71 memcpy(conf
.bssid
, bssid
, ETH_ALEN
);
73 flags
|= CONFIG_UPDATE_TYPE
;
74 if (mac
|| (!rt2x00dev
->intf_ap_count
&& !rt2x00dev
->intf_sta_count
))
75 flags
|= CONFIG_UPDATE_MAC
;
76 if (bssid
|| (!rt2x00dev
->intf_ap_count
&& !rt2x00dev
->intf_sta_count
))
77 flags
|= CONFIG_UPDATE_BSSID
;
79 rt2x00dev
->ops
->lib
->config_intf(rt2x00dev
, intf
, &conf
, flags
);
82 void rt2x00lib_config_erp(struct rt2x00_dev
*rt2x00dev
,
83 struct rt2x00_intf
*intf
,
84 struct ieee80211_bss_conf
*bss_conf
,
87 struct rt2x00lib_erp erp
;
89 memset(&erp
, 0, sizeof(erp
));
91 erp
.short_preamble
= bss_conf
->use_short_preamble
;
92 erp
.cts_protection
= bss_conf
->use_cts_prot
;
94 erp
.slot_time
= bss_conf
->use_short_slot
? SHORT_SLOT_TIME
: SLOT_TIME
;
96 erp
.pifs
= bss_conf
->use_short_slot
? SHORT_PIFS
: PIFS
;
97 erp
.difs
= bss_conf
->use_short_slot
? SHORT_DIFS
: DIFS
;
98 erp
.eifs
= bss_conf
->use_short_slot
? SHORT_EIFS
: EIFS
;
100 erp
.basic_rates
= bss_conf
->basic_rates
;
101 erp
.beacon_int
= bss_conf
->beacon_int
;
103 /* Update the AID, this is needed for dynamic PS support */
104 rt2x00dev
->aid
= bss_conf
->assoc
? bss_conf
->aid
: 0;
105 rt2x00dev
->last_beacon
= bss_conf
->timestamp
;
107 /* Update global beacon interval time, this is needed for PS support */
108 rt2x00dev
->beacon_int
= bss_conf
->beacon_int
;
110 if (changed
& BSS_CHANGED_HT
)
111 erp
.ht_opmode
= bss_conf
->ht_operation_mode
;
113 rt2x00dev
->ops
->lib
->config_erp(rt2x00dev
, &erp
, changed
);
116 void rt2x00lib_config_antenna(struct rt2x00_dev
*rt2x00dev
,
117 struct antenna_setup config
)
119 struct link_ant
*ant
= &rt2x00dev
->link
.ant
;
120 struct antenna_setup
*def
= &rt2x00dev
->default_ant
;
121 struct antenna_setup
*active
= &rt2x00dev
->link
.ant
.active
;
124 * When the caller tries to send the SW diversity,
125 * we must update the ANTENNA_RX_DIVERSITY flag to
126 * enable the antenna diversity in the link tuner.
128 * Secondly, we must guarentee we never send the
129 * software antenna diversity command to the driver.
131 if (!(ant
->flags
& ANTENNA_RX_DIVERSITY
)) {
132 if (config
.rx
== ANTENNA_SW_DIVERSITY
) {
133 ant
->flags
|= ANTENNA_RX_DIVERSITY
;
135 if (def
->rx
== ANTENNA_SW_DIVERSITY
)
136 config
.rx
= ANTENNA_B
;
140 } else if (config
.rx
== ANTENNA_SW_DIVERSITY
)
141 config
.rx
= active
->rx
;
143 if (!(ant
->flags
& ANTENNA_TX_DIVERSITY
)) {
144 if (config
.tx
== ANTENNA_SW_DIVERSITY
) {
145 ant
->flags
|= ANTENNA_TX_DIVERSITY
;
147 if (def
->tx
== ANTENNA_SW_DIVERSITY
)
148 config
.tx
= ANTENNA_B
;
152 } else if (config
.tx
== ANTENNA_SW_DIVERSITY
)
153 config
.tx
= active
->tx
;
156 * Antenna setup changes require the RX to be disabled,
157 * else the changes will be ignored by the device.
159 if (test_bit(DEVICE_STATE_ENABLED_RADIO
, &rt2x00dev
->flags
))
160 rt2x00queue_stop_queue(rt2x00dev
->rx
);
163 * Write new antenna setup to device and reset the link tuner.
164 * The latter is required since we need to recalibrate the
165 * noise-sensitivity ratio for the new setup.
167 rt2x00dev
->ops
->lib
->config_ant(rt2x00dev
, &config
);
169 rt2x00link_reset_tuner(rt2x00dev
, true);
171 memcpy(active
, &config
, sizeof(config
));
173 if (test_bit(DEVICE_STATE_ENABLED_RADIO
, &rt2x00dev
->flags
))
174 rt2x00queue_start_queue(rt2x00dev
->rx
);
177 static u16
rt2x00ht_center_channel(struct rt2x00_dev
*rt2x00dev
,
178 struct ieee80211_conf
*conf
)
180 struct hw_mode_spec
*spec
= &rt2x00dev
->spec
;
185 * Initialize center channel to current channel.
187 center_channel
= spec
->channels
[conf
->channel
->hw_value
].channel
;
190 * Adjust center channel to HT40+ and HT40- operation.
192 if (conf_is_ht40_plus(conf
))
194 else if (conf_is_ht40_minus(conf
))
195 center_channel
-= (center_channel
== 14) ? 1 : 2;
197 for (i
= 0; i
< spec
->num_channels
; i
++)
198 if (spec
->channels
[i
].channel
== center_channel
)
202 return conf
->channel
->hw_value
;
205 void rt2x00lib_config(struct rt2x00_dev
*rt2x00dev
,
206 struct ieee80211_conf
*conf
,
207 unsigned int ieee80211_flags
)
209 struct rt2x00lib_conf libconf
;
211 u16 autowake_timeout
;
215 memset(&libconf
, 0, sizeof(libconf
));
219 if (ieee80211_flags
& IEEE80211_CONF_CHANGE_CHANNEL
) {
220 if (conf_is_ht40(conf
)) {
221 set_bit(CONFIG_CHANNEL_HT40
, &rt2x00dev
->flags
);
222 hw_value
= rt2x00ht_center_channel(rt2x00dev
, conf
);
224 clear_bit(CONFIG_CHANNEL_HT40
, &rt2x00dev
->flags
);
225 hw_value
= conf
->channel
->hw_value
;
229 &rt2x00dev
->spec
.channels
[hw_value
],
232 memcpy(&libconf
.channel
,
233 &rt2x00dev
->spec
.channels_info
[hw_value
],
234 sizeof(libconf
.channel
));
237 if (test_bit(REQUIRE_PS_AUTOWAKE
, &rt2x00dev
->cap_flags
) &&
238 (ieee80211_flags
& IEEE80211_CONF_CHANGE_PS
))
239 cancel_delayed_work_sync(&rt2x00dev
->autowakeup_work
);
242 * Start configuration.
244 rt2x00dev
->ops
->lib
->config(rt2x00dev
, &libconf
, ieee80211_flags
);
247 * Some configuration changes affect the link quality
248 * which means we need to reset the link tuner.
250 if (ieee80211_flags
& IEEE80211_CONF_CHANGE_CHANNEL
)
251 rt2x00link_reset_tuner(rt2x00dev
, false);
253 if (test_bit(REQUIRE_PS_AUTOWAKE
, &rt2x00dev
->cap_flags
) &&
254 (ieee80211_flags
& IEEE80211_CONF_CHANGE_PS
) &&
255 (conf
->flags
& IEEE80211_CONF_PS
)) {
256 beacon_diff
= (long)jiffies
- (long)rt2x00dev
->last_beacon
;
257 beacon_int
= msecs_to_jiffies(rt2x00dev
->beacon_int
);
259 if (beacon_diff
> beacon_int
)
262 autowake_timeout
= (conf
->max_sleep_period
* beacon_int
) - beacon_diff
;
263 queue_delayed_work(rt2x00dev
->workqueue
,
264 &rt2x00dev
->autowakeup_work
,
265 autowake_timeout
- 15);
268 if (conf
->flags
& IEEE80211_CONF_PS
)
269 set_bit(CONFIG_POWERSAVING
, &rt2x00dev
->flags
);
271 clear_bit(CONFIG_POWERSAVING
, &rt2x00dev
->flags
);
273 rt2x00dev
->curr_band
= conf
->channel
->band
;
274 rt2x00dev
->curr_freq
= conf
->channel
->center_freq
;
275 rt2x00dev
->tx_power
= conf
->power_level
;
276 rt2x00dev
->short_retry
= conf
->short_frame_max_tx_count
;
277 rt2x00dev
->long_retry
= conf
->long_frame_max_tx_count
;