1 /* ZD1211 USB-WLAN driver for Linux
3 * Copyright (C) 2005-2007 Ulrich Kunitz <kune@deine-taler.de>
4 * Copyright (C) 2006-2007 Daniel Drake <dsd@gentoo.org>
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License as published by
8 * the Free Software Foundation; either version 2 of the License, or
9 * (at your option) any later version.
11 * This program is distributed in the hope that it will be useful,
12 * but WITHOUT ANY WARRANTY; without even the implied warranty of
13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
14 * GNU General Public License for more details.
16 * You should have received a copy of the GNU General Public License
17 * along with this program; if not, write to the Free Software
18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
24 #include <linux/completion.h>
25 #include <linux/netdevice.h>
26 #include <linux/spinlock.h>
27 #include <linux/skbuff.h>
28 #include <linux/usb.h>
32 #define ZD_USB_TX_HIGH 5
33 #define ZD_USB_TX_LOW 2
35 #define ZD_TX_TIMEOUT (HZ * 5)
36 #define ZD_TX_WATCHDOG_INTERVAL round_jiffies_relative(HZ)
37 #define ZD_RX_IDLE_INTERVAL round_jiffies_relative(30 * HZ)
54 USB_MAX_TRANSFER_SIZE
= 4096, /* bytes */
55 /* FIXME: The original driver uses this value. We have to check,
56 * whether the MAX_TRANSFER_SIZE is sufficient and this needs only be
57 * used if one combined frame is split over two USB transactions.
59 USB_MAX_RX_SIZE
= 4800, /* bytes */
60 USB_MAX_IOWRITE16_COUNT
= 15,
61 USB_MAX_IOWRITE32_COUNT
= USB_MAX_IOWRITE16_COUNT
/2,
62 USB_MAX_IOREAD16_COUNT
= 15,
63 USB_MAX_IOREAD32_COUNT
= USB_MAX_IOREAD16_COUNT
/2,
64 USB_MIN_RFWRITE_BIT_COUNT
= 16,
65 USB_MAX_RFWRITE_BIT_COUNT
= 28,
66 USB_MAX_EP_INT_BUFFER
= 64,
67 USB_ZD1211B_BCD_DEVICE
= 0x4810,
70 enum control_requests
{
71 USB_REQ_WRITE_REGS
= 0x21,
72 USB_REQ_READ_REGS
= 0x22,
73 USB_REQ_WRITE_RF
= 0x23,
74 USB_REQ_PROG_FLASH
= 0x24,
75 USB_REQ_EEPROM_START
= 0x0128, /* ? request is a byte */
76 USB_REQ_EEPROM_MID
= 0x28,
77 USB_REQ_EEPROM_END
= 0x0228, /* ? request is a byte */
78 USB_REQ_FIRMWARE_DOWNLOAD
= 0x30,
79 USB_REQ_FIRMWARE_CONFIRM
= 0x31,
80 USB_REQ_FIRMWARE_READ_DATA
= 0x32,
83 struct usb_req_read_regs
{
93 struct usb_req_write_regs
{
95 struct reg_data reg_writes
[0];
104 struct usb_req_rfwrite
{
108 /* 2: other (default) */
111 __le16 bit_values
[0];
112 /* (ZD_CR203 & ~(RF_IF_LE | RF_CLK | RF_DATA)) | (bit ? RF_DATA : 0) */
119 USB_INT_ID_REGS
= 0x90,
120 USB_INT_ID_RETRY_FAILED
= 0xa0,
124 USB_INT_READ_REGS_EN
= 0x01,
127 struct usb_int_header
{
128 u8 type
; /* must always be 1 */
132 struct usb_int_regs
{
133 struct usb_int_header hdr
;
134 struct reg_data regs
[0];
137 struct usb_int_retry_fail
{
138 struct usb_int_header hdr
;
145 struct read_regs_int
{
146 struct completion completion
;
147 /* Stores the USB int structure and contains the USB address of the
148 * first requested register before request.
150 u8 buffer
[USB_MAX_EP_INT_BUFFER
];
165 struct zd_usb_interrupt
{
166 struct read_regs_int read_regs
;
170 dma_addr_t buffer_dma
;
172 u8 read_regs_enabled
:1;
175 static inline struct usb_int_regs
*get_read_regs(struct zd_usb_interrupt
*intr
)
177 return (struct usb_int_regs
*)intr
->read_regs
.buffer
;
180 #define RX_URBS_COUNT 5
184 struct mutex setup_mutex
;
185 struct delayed_work idle_work
;
186 struct tasklet_struct reset_timer_tasklet
;
187 u8 fragment
[2 * USB_MAX_RX_SIZE
];
188 unsigned int fragment_length
;
189 unsigned int usb_packet_size
;
195 * struct zd_usb_tx - structure used for transmitting frames
196 * @enabled: atomic enabled flag, indicates whether tx is enabled
197 * @lock: lock for transmission
198 * @submitted: anchor for URBs sent to device
199 * @submitted_urbs: atomic integer that counts the URBs having sent to the
200 * device, which haven't been completed
201 * @stopped: indicates whether higher level tx queues are stopped
206 struct delayed_work watchdog_work
;
207 struct sk_buff_head submitted_skbs
;
208 struct usb_anchor submitted
;
210 u8 stopped
:1, watchdog_enabled
:1;
213 /* Contains the usb parts. The structure doesn't require a lock because intf
214 * will not be changed after initialization.
217 struct zd_usb_interrupt intr
;
220 struct usb_interface
*intf
;
221 struct usb_anchor submitted_cmds
;
222 struct urb
*urb_async_waiting
;
224 u8 req_buf
[64]; /* zd_usb_iowrite16v needs 62 bytes */
225 u8 is_zd1211b
:1, initialized
:1, was_running
:1, in_async
:1;
228 #define zd_usb_dev(usb) (&usb->intf->dev)
230 static inline struct usb_device
*zd_usb_to_usbdev(struct zd_usb
*usb
)
232 return interface_to_usbdev(usb
->intf
);
235 static inline struct ieee80211_hw
*zd_intf_to_hw(struct usb_interface
*intf
)
237 return usb_get_intfdata(intf
);
240 static inline struct ieee80211_hw
*zd_usb_to_hw(struct zd_usb
*usb
)
242 return zd_intf_to_hw(usb
->intf
);
245 void zd_usb_init(struct zd_usb
*usb
, struct ieee80211_hw
*hw
,
246 struct usb_interface
*intf
);
247 int zd_usb_init_hw(struct zd_usb
*usb
);
248 void zd_usb_clear(struct zd_usb
*usb
);
250 int zd_usb_scnprint_id(struct zd_usb
*usb
, char *buffer
, size_t size
);
252 void zd_tx_watchdog_enable(struct zd_usb
*usb
);
253 void zd_tx_watchdog_disable(struct zd_usb
*usb
);
255 int zd_usb_enable_int(struct zd_usb
*usb
);
256 void zd_usb_disable_int(struct zd_usb
*usb
);
258 int zd_usb_enable_rx(struct zd_usb
*usb
);
259 void zd_usb_disable_rx(struct zd_usb
*usb
);
261 void zd_usb_reset_rx_idle_timer(struct zd_usb
*usb
);
263 void zd_usb_enable_tx(struct zd_usb
*usb
);
264 void zd_usb_disable_tx(struct zd_usb
*usb
);
266 int zd_usb_tx(struct zd_usb
*usb
, struct sk_buff
*skb
);
268 int zd_usb_ioread16v(struct zd_usb
*usb
, u16
*values
,
269 const zd_addr_t
*addresses
, unsigned int count
);
271 static inline int zd_usb_ioread16(struct zd_usb
*usb
, u16
*value
,
272 const zd_addr_t addr
)
274 return zd_usb_ioread16v(usb
, value
, (const zd_addr_t
*)&addr
, 1);
277 void zd_usb_iowrite16v_async_start(struct zd_usb
*usb
);
278 int zd_usb_iowrite16v_async_end(struct zd_usb
*usb
, unsigned int timeout
);
279 int zd_usb_iowrite16v_async(struct zd_usb
*usb
, const struct zd_ioreq16
*ioreqs
,
281 int zd_usb_iowrite16v(struct zd_usb
*usb
, const struct zd_ioreq16
*ioreqs
,
284 int zd_usb_rfwrite(struct zd_usb
*usb
, u32 value
, u8 bits
);
286 int zd_usb_read_fw(struct zd_usb
*usb
, zd_addr_t addr
, u8
*data
, u16 len
);
288 extern struct workqueue_struct
*zd_workqueue
;
290 #endif /* _ZD_USB_H */