sfc: Don't use enums as a bitmask.

[zen-stable.git] / drivers / s390 / crypto / ap_bus.c

/*
 * linux/drivers/s390/crypto/ap_bus.c
 *
 * Copyright (C) 2006 IBM Corporation
 * Author(s): Cornelia Huck <cornelia.huck@de.ibm.com>
 *            Martin Schwidefsky <schwidefsky@de.ibm.com>
 *            Ralph Wuerthner <rwuerthn@de.ibm.com>
 *            Felix Beck <felix.beck@de.ibm.com>
 *
 * Adjunct processor bus.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2, or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#define KMSG_COMPONENT "ap"
#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt

#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/workqueue.h>
#include <linux/slab.h>
#include <linux/notifier.h>
#include <linux/kthread.h>
#include <linux/mutex.h>
#include <asm/reset.h>
#include <asm/airq.h>
#include <asm/atomic.h>
#include <asm/system.h>
#include <asm/isc.h>
#include <linux/hrtimer.h>
#include <linux/ktime.h>

#include "ap_bus.h"

/* Some prototypes. */
static void ap_scan_bus(struct work_struct *);
static void ap_poll_all(unsigned long);
static enum hrtimer_restart ap_poll_timeout(struct hrtimer *);
static int ap_poll_thread_start(void);
static void ap_poll_thread_stop(void);
static void ap_request_timeout(unsigned long);
static inline void ap_schedule_poll_timer(void);
static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags);
static int ap_device_remove(struct device *dev);
static int ap_device_probe(struct device *dev);
static void ap_interrupt_handler(void *unused1, void *unused2);
static void ap_reset(struct ap_device *ap_dev);
static void ap_config_timeout(unsigned long ptr);
static int ap_select_domain(void);

/*
 * Module description.
 */
MODULE_AUTHOR("IBM Corporation");
MODULE_DESCRIPTION("Adjunct Processor Bus driver, "
                   "Copyright 2006 IBM Corporation");
MODULE_LICENSE("GPL");

/*
 * Module parameter
 */
int ap_domain_index = -1;       /* Adjunct Processor Domain Index */
module_param_named(domain, ap_domain_index, int, 0000);
MODULE_PARM_DESC(domain, "domain index for ap devices");
EXPORT_SYMBOL(ap_domain_index);

static int ap_thread_flag = 0;
module_param_named(poll_thread, ap_thread_flag, int, 0000);
MODULE_PARM_DESC(poll_thread, "Turn on/off poll thread, default is 0 (off).");

static struct device *ap_root_device = NULL;
static DEFINE_SPINLOCK(ap_device_list_lock);
static LIST_HEAD(ap_device_list);

/*
 * Workqueue & timer for bus rescan.
 */
static struct workqueue_struct *ap_work_queue;
static struct timer_list ap_config_timer;
static int ap_config_time = AP_CONFIG_TIME;
static DECLARE_WORK(ap_config_work, ap_scan_bus);

/*
 * Tasklet & timer for AP request polling and interrupts
 */
static DECLARE_TASKLET(ap_tasklet, ap_poll_all, 0);
static atomic_t ap_poll_requests = ATOMIC_INIT(0);
static DECLARE_WAIT_QUEUE_HEAD(ap_poll_wait);
static struct task_struct *ap_poll_kthread = NULL;
static DEFINE_MUTEX(ap_poll_thread_mutex);
static DEFINE_SPINLOCK(ap_poll_timer_lock);
static void *ap_interrupt_indicator;
static struct hrtimer ap_poll_timer;
/* In LPAR poll with 4kHz frequency. Poll every 250000 nanoseconds.
 * If z/VM change to 1500000 nanoseconds to adjust to z/VM polling.*/
static unsigned long long poll_timeout = 250000;

/* Suspend flag */
static int ap_suspend_flag;
/* Flag to check if domain was set through module parameter domain=. This is
 * important when supsend and resume is done in a z/VM environment where the
 * domain might change. */
static int user_set_domain = 0;
static struct bus_type ap_bus_type;

/**
 * ap_using_interrupts() - Returns non-zero if interrupt support is
 * available.
 */
static inline int ap_using_interrupts(void)
{
        return ap_interrupt_indicator != NULL;
}

/**
 * ap_intructions_available() - Test if AP instructions are available.
 *
 * Returns 0 if the AP instructions are installed.
 */
static inline int ap_instructions_available(void)
{
        register unsigned long reg0 asm ("0") = AP_MKQID(0,0);
        register unsigned long reg1 asm ("1") = -ENODEV;
        register unsigned long reg2 asm ("2") = 0UL;

        asm volatile(
                "   .long 0xb2af0000\n"         /* PQAP(TAPQ) */
                "0: la    %1,0\n"
                "1:\n"
                EX_TABLE(0b, 1b)
                : "+d" (reg0), "+d" (reg1), "+d" (reg2) : : "cc" );
        return reg1;
}

/**
 * ap_interrupts_available(): Test if AP interrupts are available.
 *
 * Returns 1 if AP interrupts are available.
 */
static int ap_interrupts_available(void)
{
        return test_facility(2) && test_facility(65);
}

/**
 * ap_test_queue(): Test adjunct processor queue.
 * @qid: The AP queue number
 * @queue_depth: Pointer to queue depth value
 * @device_type: Pointer to device type value
 *
 * Returns AP queue status structure.
 */
static inline struct ap_queue_status
ap_test_queue(ap_qid_t qid, int *queue_depth, int *device_type)
{
        register unsigned long reg0 asm ("0") = qid;
        register struct ap_queue_status reg1 asm ("1");
        register unsigned long reg2 asm ("2") = 0UL;

        asm volatile(".long 0xb2af0000"         /* PQAP(TAPQ) */
                     : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
        *device_type = (int) (reg2 >> 24);
        *queue_depth = (int) (reg2 & 0xff);
        return reg1;
}

/**
 * ap_reset_queue(): Reset adjunct processor queue.
 * @qid: The AP queue number
 *
 * Returns AP queue status structure.
 */
static inline struct ap_queue_status ap_reset_queue(ap_qid_t qid)
{
        register unsigned long reg0 asm ("0") = qid | 0x01000000UL;
        register struct ap_queue_status reg1 asm ("1");
        register unsigned long reg2 asm ("2") = 0UL;

        asm volatile(
                ".long 0xb2af0000"              /* PQAP(RAPQ) */
                : "+d" (reg0), "=d" (reg1), "+d" (reg2) : : "cc");
        return reg1;
}

#ifdef CONFIG_64BIT
/**
 * ap_queue_interruption_control(): Enable interruption for a specific AP.
 * @qid: The AP queue number
 * @ind: The notification indicator byte
 *
 * Returns AP queue status.
 */
static inline struct ap_queue_status
ap_queue_interruption_control(ap_qid_t qid, void *ind)
{
        register unsigned long reg0 asm ("0") = qid | 0x03000000UL;
        register unsigned long reg1_in asm ("1") = 0x0000800000000000UL | AP_ISC;
        register struct ap_queue_status reg1_out asm ("1");
        register void *reg2 asm ("2") = ind;
        asm volatile(
                ".long 0xb2af0000"              /* PQAP(RAPQ) */
                : "+d" (reg0), "+d" (reg1_in), "=d" (reg1_out), "+d" (reg2)
                :
                : "cc" );
        return reg1_out;
}
#endif

static inline struct ap_queue_status __ap_4096_commands_available(ap_qid_t qid,
                                                                  int *support)
{
        register unsigned long reg0 asm ("0") = 0UL | qid | (1UL << 23);
        register struct ap_queue_status reg1 asm ("1");
        register unsigned long reg2 asm ("2") = 0UL;

        asm volatile(
                ".long 0xb2af0000\n"
                "0: la    %1,0\n"
                "1:\n"
                EX_TABLE(0b, 1b)
                : "+d" (reg0), "=d" (reg1), "=d" (reg2)
                :
                : "cc");

        if (reg2 & 0x6000000000000000ULL)
                *support = 1;
        else
                *support = 0;

        return reg1;
}

/**
 * ap_4096_commands_availablen(): Check for availability of 4096 bit RSA
 * support.
 * @qid: The AP queue number
 *
 * Returns 1 if 4096 bit RSA keys are support fo the AP, returns 0 if not.
 */
int ap_4096_commands_available(ap_qid_t qid)
{
        struct ap_queue_status status;
        int i, support = 0;
        status = __ap_4096_commands_available(qid, &support);

        for (i = 0; i < AP_MAX_RESET; i++) {
                switch (status.response_code) {
                case AP_RESPONSE_NORMAL:
                        return support;
                case AP_RESPONSE_RESET_IN_PROGRESS:
                case AP_RESPONSE_BUSY:
                        break;
                case AP_RESPONSE_Q_NOT_AVAIL:
                case AP_RESPONSE_DECONFIGURED:
                case AP_RESPONSE_CHECKSTOPPED:
                case AP_RESPONSE_INVALID_ADDRESS:
                        return 0;
                case AP_RESPONSE_OTHERWISE_CHANGED:
                        break;
                default:
                        break;
                }
                if (i < AP_MAX_RESET - 1) {
                        udelay(5);
                        status = __ap_4096_commands_available(qid, &support);
                }
        }
        return support;
}
EXPORT_SYMBOL(ap_4096_commands_available);

/**
 * ap_queue_enable_interruption(): Enable interruption on an AP.
 * @qid: The AP queue number
 * @ind: the notification indicator byte
 *
 * Enables interruption on AP queue via ap_queue_interruption_control(). Based
 * on the return value it waits a while and tests the AP queue if interrupts
 * have been switched on using ap_test_queue().
 */
static int ap_queue_enable_interruption(ap_qid_t qid, void *ind)
{
#ifdef CONFIG_64BIT
        struct ap_queue_status status;
        int t_depth, t_device_type, rc, i;

        rc = -EBUSY;
        status = ap_queue_interruption_control(qid, ind);

        for (i = 0; i < AP_MAX_RESET; i++) {
                switch (status.response_code) {
                case AP_RESPONSE_NORMAL:
                        if (status.int_enabled)
                                return 0;
                        break;
                case AP_RESPONSE_RESET_IN_PROGRESS:
                case AP_RESPONSE_BUSY:
                        break;
                case AP_RESPONSE_Q_NOT_AVAIL:
                case AP_RESPONSE_DECONFIGURED:
                case AP_RESPONSE_CHECKSTOPPED:
                case AP_RESPONSE_INVALID_ADDRESS:
                        return -ENODEV;
                case AP_RESPONSE_OTHERWISE_CHANGED:
                        if (status.int_enabled)
                                return 0;
                        break;
                default:
                        break;
                }
                if (i < AP_MAX_RESET - 1) {
                        udelay(5);
                        status = ap_test_queue(qid, &t_depth, &t_device_type);
                }
        }
        return rc;
#else
        return -EINVAL;
#endif
}

/**
 * __ap_send(): Send message to adjunct processor queue.
 * @qid: The AP queue number
 * @psmid: The program supplied message identifier
 * @msg: The message text
 * @length: The message length
 * @special: Special Bit
 *
 * Returns AP queue status structure.
 * Condition code 1 on NQAP can't happen because the L bit is 1.
 * Condition code 2 on NQAP also means the send is incomplete,
 * because a segment boundary was reached. The NQAP is repeated.
 */
static inline struct ap_queue_status
__ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length,
          unsigned int special)
{
        typedef struct { char _[length]; } msgblock;
        register unsigned long reg0 asm ("0") = qid | 0x40000000UL;
        register struct ap_queue_status reg1 asm ("1");
        register unsigned long reg2 asm ("2") = (unsigned long) msg;
        register unsigned long reg3 asm ("3") = (unsigned long) length;
        register unsigned long reg4 asm ("4") = (unsigned int) (psmid >> 32);
        register unsigned long reg5 asm ("5") = (unsigned int) psmid;

        if (special == 1)
                reg0 |= 0x400000UL;

        asm volatile (
                "0: .long 0xb2ad0042\n"         /* DQAP */
                "   brc   2,0b"
                : "+d" (reg0), "=d" (reg1), "+d" (reg2), "+d" (reg3)
                : "d" (reg4), "d" (reg5), "m" (*(msgblock *) msg)
                : "cc" );
        return reg1;
}

int ap_send(ap_qid_t qid, unsigned long long psmid, void *msg, size_t length)
{
        struct ap_queue_status status;

        status = __ap_send(qid, psmid, msg, length, 0);
        switch (status.response_code) {
        case AP_RESPONSE_NORMAL:
                return 0;
        case AP_RESPONSE_Q_FULL:
        case AP_RESPONSE_RESET_IN_PROGRESS:
                return -EBUSY;
        case AP_RESPONSE_REQ_FAC_NOT_INST:
                return -EINVAL;
        default:        /* Device is gone. */
                return -ENODEV;
        }
}
EXPORT_SYMBOL(ap_send);

/**
 * __ap_recv(): Receive message from adjunct processor queue.
 * @qid: The AP queue number
 * @psmid: Pointer to program supplied message identifier
 * @msg: The message text
 * @length: The message length
 *
 * Returns AP queue status structure.
 * Condition code 1 on DQAP means the receive has taken place
 * but only partially.  The response is incomplete, hence the
 * DQAP is repeated.
 * Condition code 2 on DQAP also means the receive is incomplete,
 * this time because a segment boundary was reached. Again, the
 * DQAP is repeated.
 * Note that gpr2 is used by the DQAP instruction to keep track of
 * any 'residual' length, in case the instruction gets interrupted.
 * Hence it gets zeroed before the instruction.
 */
static inline struct ap_queue_status
__ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
{
        typedef struct { char _[length]; } msgblock;
        register unsigned long reg0 asm("0") = qid | 0x80000000UL;
        register struct ap_queue_status reg1 asm ("1");
        register unsigned long reg2 asm("2") = 0UL;
        register unsigned long reg4 asm("4") = (unsigned long) msg;
        register unsigned long reg5 asm("5") = (unsigned long) length;
        register unsigned long reg6 asm("6") = 0UL;
        register unsigned long reg7 asm("7") = 0UL;


        asm volatile(
                "0: .long 0xb2ae0064\n"
                "   brc   6,0b\n"
                : "+d" (reg0), "=d" (reg1), "+d" (reg2),
                "+d" (reg4), "+d" (reg5), "+d" (reg6), "+d" (reg7),
                "=m" (*(msgblock *) msg) : : "cc" );
        *psmid = (((unsigned long long) reg6) << 32) + reg7;
        return reg1;
}

int ap_recv(ap_qid_t qid, unsigned long long *psmid, void *msg, size_t length)
{
        struct ap_queue_status status;

        status = __ap_recv(qid, psmid, msg, length);
        switch (status.response_code) {
        case AP_RESPONSE_NORMAL:
                return 0;
        case AP_RESPONSE_NO_PENDING_REPLY:
                if (status.queue_empty)
                        return -ENOENT;
                return -EBUSY;
        case AP_RESPONSE_RESET_IN_PROGRESS:
                return -EBUSY;
        default:
                return -ENODEV;
        }
}
EXPORT_SYMBOL(ap_recv);

/**
 * ap_query_queue(): Check if an AP queue is available.
 * @qid: The AP queue number
 * @queue_depth: Pointer to queue depth value
 * @device_type: Pointer to device type value
 *
 * The test is repeated for AP_MAX_RESET times.
 */
static int ap_query_queue(ap_qid_t qid, int *queue_depth, int *device_type)
{
        struct ap_queue_status status;
        int t_depth, t_device_type, rc, i;

        rc = -EBUSY;
        for (i = 0; i < AP_MAX_RESET; i++) {
                status = ap_test_queue(qid, &t_depth, &t_device_type);
                switch (status.response_code) {
                case AP_RESPONSE_NORMAL:
                        *queue_depth = t_depth + 1;
                        *device_type = t_device_type;
                        rc = 0;
                        break;
                case AP_RESPONSE_Q_NOT_AVAIL:
                        rc = -ENODEV;
                        break;
                case AP_RESPONSE_RESET_IN_PROGRESS:
                        break;
                case AP_RESPONSE_DECONFIGURED:
                        rc = -ENODEV;
                        break;
                case AP_RESPONSE_CHECKSTOPPED:
                        rc = -ENODEV;
                        break;
                case AP_RESPONSE_INVALID_ADDRESS:
                        rc = -ENODEV;
                        break;
                case AP_RESPONSE_OTHERWISE_CHANGED:
                        break;
                case AP_RESPONSE_BUSY:
                        break;
                default:
                        BUG();
                }
                if (rc != -EBUSY)
                        break;
                if (i < AP_MAX_RESET - 1)
                        udelay(5);
        }
        return rc;
}

/**
 * ap_init_queue(): Reset an AP queue.
 * @qid: The AP queue number
 *
 * Reset an AP queue and wait for it to become available again.
 */
static int ap_init_queue(ap_qid_t qid)
{
        struct ap_queue_status status;
        int rc, dummy, i;

        rc = -ENODEV;
        status = ap_reset_queue(qid);
        for (i = 0; i < AP_MAX_RESET; i++) {
                switch (status.response_code) {
                case AP_RESPONSE_NORMAL:
                        if (status.queue_empty)
                                rc = 0;
                        break;
                case AP_RESPONSE_Q_NOT_AVAIL:
                case AP_RESPONSE_DECONFIGURED:
                case AP_RESPONSE_CHECKSTOPPED:
                        i = AP_MAX_RESET;       /* return with -ENODEV */
                        break;
                case AP_RESPONSE_RESET_IN_PROGRESS:
                        rc = -EBUSY;
                case AP_RESPONSE_BUSY:
                default:
                        break;
                }
                if (rc != -ENODEV && rc != -EBUSY)
                        break;
                if (i < AP_MAX_RESET - 1) {
                        udelay(5);
                        status = ap_test_queue(qid, &dummy, &dummy);
                }
        }
        if (rc == 0 && ap_using_interrupts()) {
                rc = ap_queue_enable_interruption(qid, ap_interrupt_indicator);
                /* If interruption mode is supported by the machine,
                * but an AP can not be enabled for interruption then
                * the AP will be discarded.    */
                if (rc)
                        pr_err("Registering adapter interrupts for "
                               "AP %d failed\n", AP_QID_DEVICE(qid));
        }
        return rc;
}

/**
 * ap_increase_queue_count(): Arm request timeout.
 * @ap_dev: Pointer to an AP device.
 *
 * Arm request timeout if an AP device was idle and a new request is submitted.
 */
static void ap_increase_queue_count(struct ap_device *ap_dev)
{
        int timeout = ap_dev->drv->request_timeout;

        ap_dev->queue_count++;
        if (ap_dev->queue_count == 1) {
                mod_timer(&ap_dev->timeout, jiffies + timeout);
                ap_dev->reset = AP_RESET_ARMED;
        }
}

/**
 * ap_decrease_queue_count(): Decrease queue count.
 * @ap_dev: Pointer to an AP device.
 *
 * If AP device is still alive, re-schedule request timeout if there are still
 * pending requests.
 */
static void ap_decrease_queue_count(struct ap_device *ap_dev)
{
        int timeout = ap_dev->drv->request_timeout;

        ap_dev->queue_count--;
        if (ap_dev->queue_count > 0)
                mod_timer(&ap_dev->timeout, jiffies + timeout);
        else
                /*
                 * The timeout timer should to be disabled now - since
                 * del_timer_sync() is very expensive, we just tell via the
                 * reset flag to ignore the pending timeout timer.
                 */
                ap_dev->reset = AP_RESET_IGNORE;
}

/*
 * AP device related attributes.
 */
static ssize_t ap_hwtype_show(struct device *dev,
                              struct device_attribute *attr, char *buf)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->device_type);
}

static DEVICE_ATTR(hwtype, 0444, ap_hwtype_show, NULL);
static ssize_t ap_depth_show(struct device *dev, struct device_attribute *attr,
                             char *buf)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        return snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->queue_depth);
}

static DEVICE_ATTR(depth, 0444, ap_depth_show, NULL);
static ssize_t ap_request_count_show(struct device *dev,
                                     struct device_attribute *attr,
                                     char *buf)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        int rc;

        spin_lock_bh(&ap_dev->lock);
        rc = snprintf(buf, PAGE_SIZE, "%d\n", ap_dev->total_request_count);
        spin_unlock_bh(&ap_dev->lock);
        return rc;
}

static DEVICE_ATTR(request_count, 0444, ap_request_count_show, NULL);

static ssize_t ap_modalias_show(struct device *dev,
                                struct device_attribute *attr, char *buf)
{
        return sprintf(buf, "ap:t%02X", to_ap_dev(dev)->device_type);
}

static DEVICE_ATTR(modalias, 0444, ap_modalias_show, NULL);

static struct attribute *ap_dev_attrs[] = {
        &dev_attr_hwtype.attr,
        &dev_attr_depth.attr,
        &dev_attr_request_count.attr,
        &dev_attr_modalias.attr,
        NULL
};
static struct attribute_group ap_dev_attr_group = {
        .attrs = ap_dev_attrs
};

/**
 * ap_bus_match()
 * @dev: Pointer to device
 * @drv: Pointer to device_driver
 *
 * AP bus driver registration/unregistration.
 */
static int ap_bus_match(struct device *dev, struct device_driver *drv)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        struct ap_driver *ap_drv = to_ap_drv(drv);
        struct ap_device_id *id;

        /*
         * Compare device type of the device with the list of
         * supported types of the device_driver.
         */
        for (id = ap_drv->ids; id->match_flags; id++) {
                if ((id->match_flags & AP_DEVICE_ID_MATCH_DEVICE_TYPE) &&
                    (id->dev_type != ap_dev->device_type))
                        continue;
                return 1;
        }
        return 0;
}

/**
 * ap_uevent(): Uevent function for AP devices.
 * @dev: Pointer to device
 * @env: Pointer to kobj_uevent_env
 *
 * It sets up a single environment variable DEV_TYPE which contains the
 * hardware device type.
 */
static int ap_uevent (struct device *dev, struct kobj_uevent_env *env)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        int retval = 0;

        if (!ap_dev)
                return -ENODEV;

        /* Set up DEV_TYPE environment variable. */
        retval = add_uevent_var(env, "DEV_TYPE=%04X", ap_dev->device_type);
        if (retval)
                return retval;

        /* Add MODALIAS= */
        retval = add_uevent_var(env, "MODALIAS=ap:t%02X", ap_dev->device_type);

        return retval;
}

static int ap_bus_suspend(struct device *dev, pm_message_t state)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        unsigned long flags;

        if (!ap_suspend_flag) {
                ap_suspend_flag = 1;

                /* Disable scanning for devices, thus we do not want to scan
                 * for them after removing.
                 */
                del_timer_sync(&ap_config_timer);
                if (ap_work_queue != NULL) {
                        destroy_workqueue(ap_work_queue);
                        ap_work_queue = NULL;
                }

                tasklet_disable(&ap_tasklet);
        }
        /* Poll on the device until all requests are finished. */
        do {
                flags = 0;
                spin_lock_bh(&ap_dev->lock);
                __ap_poll_device(ap_dev, &flags);
                spin_unlock_bh(&ap_dev->lock);
        } while ((flags & 1) || (flags & 2));

        spin_lock_bh(&ap_dev->lock);
        ap_dev->unregistered = 1;
        spin_unlock_bh(&ap_dev->lock);

        return 0;
}

static int ap_bus_resume(struct device *dev)
{
        int rc = 0;
        struct ap_device *ap_dev = to_ap_dev(dev);

        if (ap_suspend_flag) {
                ap_suspend_flag = 0;
                if (!ap_interrupts_available())
                        ap_interrupt_indicator = NULL;
                if (!user_set_domain) {
                        ap_domain_index = -1;
                        ap_select_domain();
                }
                init_timer(&ap_config_timer);
                ap_config_timer.function = ap_config_timeout;
                ap_config_timer.data = 0;
                ap_config_timer.expires = jiffies + ap_config_time * HZ;
                add_timer(&ap_config_timer);
                ap_work_queue = create_singlethread_workqueue("kapwork");
                if (!ap_work_queue)
                        return -ENOMEM;
                tasklet_enable(&ap_tasklet);
                if (!ap_using_interrupts())
                        ap_schedule_poll_timer();
                else
                        tasklet_schedule(&ap_tasklet);
                if (ap_thread_flag)
                        rc = ap_poll_thread_start();
        }
        if (AP_QID_QUEUE(ap_dev->qid) != ap_domain_index) {
                spin_lock_bh(&ap_dev->lock);
                ap_dev->qid = AP_MKQID(AP_QID_DEVICE(ap_dev->qid),
                                       ap_domain_index);
                spin_unlock_bh(&ap_dev->lock);
        }
        queue_work(ap_work_queue, &ap_config_work);

        return rc;
}

static struct bus_type ap_bus_type = {
        .name = "ap",
        .match = &ap_bus_match,
        .uevent = &ap_uevent,
        .suspend = ap_bus_suspend,
        .resume = ap_bus_resume
};

static int ap_device_probe(struct device *dev)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        struct ap_driver *ap_drv = to_ap_drv(dev->driver);
        int rc;

        ap_dev->drv = ap_drv;
        rc = ap_drv->probe ? ap_drv->probe(ap_dev) : -ENODEV;
        if (!rc) {
                spin_lock_bh(&ap_device_list_lock);
                list_add(&ap_dev->list, &ap_device_list);
                spin_unlock_bh(&ap_device_list_lock);
        }
        return rc;
}

/**
 * __ap_flush_queue(): Flush requests.
 * @ap_dev: Pointer to the AP device
 *
 * Flush all requests from the request/pending queue of an AP device.
 */
static void __ap_flush_queue(struct ap_device *ap_dev)
{
        struct ap_message *ap_msg, *next;

        list_for_each_entry_safe(ap_msg, next, &ap_dev->pendingq, list) {
                list_del_init(&ap_msg->list);
                ap_dev->pendingq_count--;
                ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
        }
        list_for_each_entry_safe(ap_msg, next, &ap_dev->requestq, list) {
                list_del_init(&ap_msg->list);
                ap_dev->requestq_count--;
                ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
        }
}

void ap_flush_queue(struct ap_device *ap_dev)
{
        spin_lock_bh(&ap_dev->lock);
        __ap_flush_queue(ap_dev);
        spin_unlock_bh(&ap_dev->lock);
}
EXPORT_SYMBOL(ap_flush_queue);

static int ap_device_remove(struct device *dev)
{
        struct ap_device *ap_dev = to_ap_dev(dev);
        struct ap_driver *ap_drv = ap_dev->drv;

        ap_flush_queue(ap_dev);
        del_timer_sync(&ap_dev->timeout);
        spin_lock_bh(&ap_device_list_lock);
        list_del_init(&ap_dev->list);
        spin_unlock_bh(&ap_device_list_lock);
        if (ap_drv->remove)
                ap_drv->remove(ap_dev);
        spin_lock_bh(&ap_dev->lock);
        atomic_sub(ap_dev->queue_count, &ap_poll_requests);
        spin_unlock_bh(&ap_dev->lock);
        return 0;
}

int ap_driver_register(struct ap_driver *ap_drv, struct module *owner,
                       char *name)
{
        struct device_driver *drv = &ap_drv->driver;

        drv->bus = &ap_bus_type;
        drv->probe = ap_device_probe;
        drv->remove = ap_device_remove;
        drv->owner = owner;
        drv->name = name;
        return driver_register(drv);
}
EXPORT_SYMBOL(ap_driver_register);

void ap_driver_unregister(struct ap_driver *ap_drv)
{
        driver_unregister(&ap_drv->driver);
}
EXPORT_SYMBOL(ap_driver_unregister);

/*
 * AP bus attributes.
 */
static ssize_t ap_domain_show(struct bus_type *bus, char *buf)
{
        return snprintf(buf, PAGE_SIZE, "%d\n", ap_domain_index);
}

static BUS_ATTR(ap_domain, 0444, ap_domain_show, NULL);

static ssize_t ap_config_time_show(struct bus_type *bus, char *buf)
{
        return snprintf(buf, PAGE_SIZE, "%d\n", ap_config_time);
}

static ssize_t ap_interrupts_show(struct bus_type *bus, char *buf)
{
        return snprintf(buf, PAGE_SIZE, "%d\n",
                        ap_using_interrupts() ? 1 : 0);
}

static BUS_ATTR(ap_interrupts, 0444, ap_interrupts_show, NULL);

static ssize_t ap_config_time_store(struct bus_type *bus,
                                    const char *buf, size_t count)
{
        int time;

        if (sscanf(buf, "%d\n", &time) != 1 || time < 5 || time > 120)
                return -EINVAL;
        ap_config_time = time;
        if (!timer_pending(&ap_config_timer) ||
            !mod_timer(&ap_config_timer, jiffies + ap_config_time * HZ)) {
                ap_config_timer.expires = jiffies + ap_config_time * HZ;
                add_timer(&ap_config_timer);
        }
        return count;
}

static BUS_ATTR(config_time, 0644, ap_config_time_show, ap_config_time_store);

static ssize_t ap_poll_thread_show(struct bus_type *bus, char *buf)
{
        return snprintf(buf, PAGE_SIZE, "%d\n", ap_poll_kthread ? 1 : 0);
}

static ssize_t ap_poll_thread_store(struct bus_type *bus,
                                    const char *buf, size_t count)
{
        int flag, rc;

        if (sscanf(buf, "%d\n", &flag) != 1)
                return -EINVAL;
        if (flag) {
                rc = ap_poll_thread_start();
                if (rc)
                        return rc;
        }
        else
                ap_poll_thread_stop();
        return count;
}

static BUS_ATTR(poll_thread, 0644, ap_poll_thread_show, ap_poll_thread_store);

static ssize_t poll_timeout_show(struct bus_type *bus, char *buf)
{
        return snprintf(buf, PAGE_SIZE, "%llu\n", poll_timeout);
}

static ssize_t poll_timeout_store(struct bus_type *bus, const char *buf,
                                  size_t count)
{
        unsigned long long time;
        ktime_t hr_time;

        /* 120 seconds = maximum poll interval */
        if (sscanf(buf, "%llu\n", &time) != 1 || time < 1 ||
            time > 120000000000ULL)
                return -EINVAL;
        poll_timeout = time;
        hr_time = ktime_set(0, poll_timeout);

        if (!hrtimer_is_queued(&ap_poll_timer) ||
            !hrtimer_forward(&ap_poll_timer, hrtimer_get_expires(&ap_poll_timer), hr_time)) {
                hrtimer_set_expires(&ap_poll_timer, hr_time);
                hrtimer_start_expires(&ap_poll_timer, HRTIMER_MODE_ABS);
        }
        return count;
}

static BUS_ATTR(poll_timeout, 0644, poll_timeout_show, poll_timeout_store);

static struct bus_attribute *const ap_bus_attrs[] = {
        &bus_attr_ap_domain,
        &bus_attr_config_time,
        &bus_attr_poll_thread,
        &bus_attr_ap_interrupts,
        &bus_attr_poll_timeout,
        NULL,
};

/**
 * ap_select_domain(): Select an AP domain.
 *
 * Pick one of the 16 AP domains.
 */
static int ap_select_domain(void)
{
        int queue_depth, device_type, count, max_count, best_domain;
        int rc, i, j;

        /*
         * We want to use a single domain. Either the one specified with
         * the "domain=" parameter or the domain with the maximum number
         * of devices.
         */
        if (ap_domain_index >= 0 && ap_domain_index < AP_DOMAINS)
                /* Domain has already been selected. */
                return 0;
        best_domain = -1;
        max_count = 0;
        for (i = 0; i < AP_DOMAINS; i++) {
                count = 0;
                for (j = 0; j < AP_DEVICES; j++) {
                        ap_qid_t qid = AP_MKQID(j, i);
                        rc = ap_query_queue(qid, &queue_depth, &device_type);
                        if (rc)
                                continue;
                        count++;
                }
                if (count > max_count) {
                        max_count = count;
                        best_domain = i;
                }
        }
        if (best_domain >= 0){
                ap_domain_index = best_domain;
                return 0;
        }
        return -ENODEV;
}

/**
 * ap_probe_device_type(): Find the device type of an AP.
 * @ap_dev: pointer to the AP device.
 *
 * Find the device type if query queue returned a device type of 0.
 */
static int ap_probe_device_type(struct ap_device *ap_dev)
{
        static unsigned char msg[] = {
                0x00,0x06,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x58,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x01,0x00,0x43,0x43,0x41,0x2d,0x41,0x50,
                0x50,0x4c,0x20,0x20,0x20,0x01,0x01,0x01,
                0x00,0x00,0x00,0x00,0x50,0x4b,0x00,0x00,
                0x00,0x00,0x01,0x1c,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x05,0xb8,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x70,0x00,0x41,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x54,0x32,0x01,0x00,0xa0,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0xb8,0x05,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x0a,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,
                0x49,0x43,0x53,0x46,0x20,0x20,0x20,0x20,
                0x50,0x4b,0x0a,0x00,0x50,0x4b,0x43,0x53,
                0x2d,0x31,0x2e,0x32,0x37,0x00,0x11,0x22,
                0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
                0x11,0x22,0x33,0x44,0x55,0x66,0x77,0x88,
                0x99,0x00,0x11,0x22,0x33,0x44,0x55,0x66,
                0x77,0x88,0x99,0x00,0x11,0x22,0x33,0x44,
                0x55,0x66,0x77,0x88,0x99,0x00,0x11,0x22,
                0x33,0x44,0x55,0x66,0x77,0x88,0x99,0x00,
                0x11,0x22,0x33,0x5d,0x00,0x5b,0x00,0x77,
                0x88,0x1e,0x00,0x00,0x57,0x00,0x00,0x00,
                0x00,0x04,0x00,0x00,0x4f,0x00,0x00,0x00,
                0x03,0x02,0x00,0x00,0x40,0x01,0x00,0x01,
                0xce,0x02,0x68,0x2d,0x5f,0xa9,0xde,0x0c,
                0xf6,0xd2,0x7b,0x58,0x4b,0xf9,0x28,0x68,
                0x3d,0xb4,0xf4,0xef,0x78,0xd5,0xbe,0x66,
                0x63,0x42,0xef,0xf8,0xfd,0xa4,0xf8,0xb0,
                0x8e,0x29,0xc2,0xc9,0x2e,0xd8,0x45,0xb8,
                0x53,0x8c,0x6f,0x4e,0x72,0x8f,0x6c,0x04,
                0x9c,0x88,0xfc,0x1e,0xc5,0x83,0x55,0x57,
                0xf7,0xdd,0xfd,0x4f,0x11,0x36,0x95,0x5d,
        };
        struct ap_queue_status status;
        unsigned long long psmid;
        char *reply;
        int rc, i;

        reply = (void *) get_zeroed_page(GFP_KERNEL);
        if (!reply) {
                rc = -ENOMEM;
                goto out;
        }

        status = __ap_send(ap_dev->qid, 0x0102030405060708ULL,
                           msg, sizeof(msg), 0);
        if (status.response_code != AP_RESPONSE_NORMAL) {
                rc = -ENODEV;
                goto out_free;
        }

        /* Wait for the test message to complete. */
        for (i = 0; i < 6; i++) {
                mdelay(300);
                status = __ap_recv(ap_dev->qid, &psmid, reply, 4096);
                if (status.response_code == AP_RESPONSE_NORMAL &&
                    psmid == 0x0102030405060708ULL)
                        break;
        }
        if (i < 6) {
                /* Got an answer. */
                if (reply[0] == 0x00 && reply[1] == 0x86)
                        ap_dev->device_type = AP_DEVICE_TYPE_PCICC;
                else
                        ap_dev->device_type = AP_DEVICE_TYPE_PCICA;
                rc = 0;
        } else
                rc = -ENODEV;

out_free:
        free_page((unsigned long) reply);
out:
        return rc;
}

static void ap_interrupt_handler(void *unused1, void *unused2)
{
        kstat_cpu(smp_processor_id()).irqs[IOINT_APB]++;
        tasklet_schedule(&ap_tasklet);
}

/**
 * __ap_scan_bus(): Scan the AP bus.
 * @dev: Pointer to device
 * @data: Pointer to data
 *
 * Scan the AP bus for new devices.
 */
static int __ap_scan_bus(struct device *dev, void *data)
{
        return to_ap_dev(dev)->qid == (ap_qid_t)(unsigned long) data;
}

static void ap_device_release(struct device *dev)
{
        struct ap_device *ap_dev = to_ap_dev(dev);

        kfree(ap_dev);
}

static void ap_scan_bus(struct work_struct *unused)
{
        struct ap_device *ap_dev;
        struct device *dev;
        ap_qid_t qid;
        int queue_depth, device_type;
        int rc, i;

        if (ap_select_domain() != 0)
                return;
        for (i = 0; i < AP_DEVICES; i++) {
                qid = AP_MKQID(i, ap_domain_index);
                dev = bus_find_device(&ap_bus_type, NULL,
                                      (void *)(unsigned long)qid,
                                      __ap_scan_bus);
                rc = ap_query_queue(qid, &queue_depth, &device_type);
                if (dev) {
                        if (rc == -EBUSY) {
                                set_current_state(TASK_UNINTERRUPTIBLE);
                                schedule_timeout(AP_RESET_TIMEOUT);
                                rc = ap_query_queue(qid, &queue_depth,
                                                    &device_type);
                        }
                        ap_dev = to_ap_dev(dev);
                        spin_lock_bh(&ap_dev->lock);
                        if (rc || ap_dev->unregistered) {
                                spin_unlock_bh(&ap_dev->lock);
                                if (ap_dev->unregistered)
                                        i--;
                                device_unregister(dev);
                                put_device(dev);
                                continue;
                        }
                        spin_unlock_bh(&ap_dev->lock);
                        put_device(dev);
                        continue;
                }
                if (rc)
                        continue;
                rc = ap_init_queue(qid);
                if (rc)
                        continue;
                ap_dev = kzalloc(sizeof(*ap_dev), GFP_KERNEL);
                if (!ap_dev)
                        break;
                ap_dev->qid = qid;
                ap_dev->queue_depth = queue_depth;
                ap_dev->unregistered = 1;
                spin_lock_init(&ap_dev->lock);
                INIT_LIST_HEAD(&ap_dev->pendingq);
                INIT_LIST_HEAD(&ap_dev->requestq);
                INIT_LIST_HEAD(&ap_dev->list);
                setup_timer(&ap_dev->timeout, ap_request_timeout,
                            (unsigned long) ap_dev);
                if (device_type == 0)
                        ap_probe_device_type(ap_dev);
                else
                        ap_dev->device_type = device_type;

                ap_dev->device.bus = &ap_bus_type;
                ap_dev->device.parent = ap_root_device;
                if (dev_set_name(&ap_dev->device, "card%02x",
                                 AP_QID_DEVICE(ap_dev->qid))) {
                        kfree(ap_dev);
                        continue;
                }
                ap_dev->device.release = ap_device_release;
                rc = device_register(&ap_dev->device);
                if (rc) {
                        put_device(&ap_dev->device);
                        continue;
                }
                /* Add device attributes. */
                rc = sysfs_create_group(&ap_dev->device.kobj,
                                        &ap_dev_attr_group);
                if (!rc) {
                        spin_lock_bh(&ap_dev->lock);
                        ap_dev->unregistered = 0;
                        spin_unlock_bh(&ap_dev->lock);
                }
                else
                        device_unregister(&ap_dev->device);
        }
}

static void
ap_config_timeout(unsigned long ptr)
{
        queue_work(ap_work_queue, &ap_config_work);
        ap_config_timer.expires = jiffies + ap_config_time * HZ;
        add_timer(&ap_config_timer);
}

/**
 * ap_schedule_poll_timer(): Schedule poll timer.
 *
 * Set up the timer to run the poll tasklet
 */
static inline void ap_schedule_poll_timer(void)
{
        ktime_t hr_time;

        spin_lock_bh(&ap_poll_timer_lock);
        if (ap_using_interrupts() || ap_suspend_flag)
                goto out;
        if (hrtimer_is_queued(&ap_poll_timer))
                goto out;
        if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
                hr_time = ktime_set(0, poll_timeout);
                hrtimer_forward_now(&ap_poll_timer, hr_time);
                hrtimer_restart(&ap_poll_timer);
        }
out:
        spin_unlock_bh(&ap_poll_timer_lock);
}

/**
 * ap_poll_read(): Receive pending reply messages from an AP device.
 * @ap_dev: pointer to the AP device
 * @flags: pointer to control flags, bit 2^0 is set if another poll is
 *         required, bit 2^1 is set if the poll timer needs to get armed
 *
 * Returns 0 if the device is still present, -ENODEV if not.
 */
static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
{
        struct ap_queue_status status;
        struct ap_message *ap_msg;

        if (ap_dev->queue_count <= 0)
                return 0;
        status = __ap_recv(ap_dev->qid, &ap_dev->reply->psmid,
                           ap_dev->reply->message, ap_dev->reply->length);
        switch (status.response_code) {
        case AP_RESPONSE_NORMAL:
                atomic_dec(&ap_poll_requests);
                ap_decrease_queue_count(ap_dev);
                list_for_each_entry(ap_msg, &ap_dev->pendingq, list) {
                        if (ap_msg->psmid != ap_dev->reply->psmid)
                                continue;
                        list_del_init(&ap_msg->list);
                        ap_dev->pendingq_count--;
                        ap_dev->drv->receive(ap_dev, ap_msg, ap_dev->reply);
                        break;
                }
                if (ap_dev->queue_count > 0)
                        *flags |= 1;
                break;
        case AP_RESPONSE_NO_PENDING_REPLY:
                if (status.queue_empty) {
                        /* The card shouldn't forget requests but who knows. */
                        atomic_sub(ap_dev->queue_count, &ap_poll_requests);
                        ap_dev->queue_count = 0;
                        list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
                        ap_dev->requestq_count += ap_dev->pendingq_count;
                        ap_dev->pendingq_count = 0;
                } else
                        *flags |= 2;
                break;
        default:
                return -ENODEV;
        }
        return 0;
}

/**
 * ap_poll_write(): Send messages from the request queue to an AP device.
 * @ap_dev: pointer to the AP device
 * @flags: pointer to control flags, bit 2^0 is set if another poll is
 *         required, bit 2^1 is set if the poll timer needs to get armed
 *
 * Returns 0 if the device is still present, -ENODEV if not.
 */
static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
{
        struct ap_queue_status status;
        struct ap_message *ap_msg;

        if (ap_dev->requestq_count <= 0 ||
            ap_dev->queue_count >= ap_dev->queue_depth)
                return 0;
        /* Start the next request on the queue. */
        ap_msg = list_entry(ap_dev->requestq.next, struct ap_message, list);
        status = __ap_send(ap_dev->qid, ap_msg->psmid,
                           ap_msg->message, ap_msg->length, ap_msg->special);
        switch (status.response_code) {
        case AP_RESPONSE_NORMAL:
                atomic_inc(&ap_poll_requests);
                ap_increase_queue_count(ap_dev);
                list_move_tail(&ap_msg->list, &ap_dev->pendingq);
                ap_dev->requestq_count--;
                ap_dev->pendingq_count++;
                if (ap_dev->queue_count < ap_dev->queue_depth &&
                    ap_dev->requestq_count > 0)
                        *flags |= 1;
                *flags |= 2;
                break;
        case AP_RESPONSE_Q_FULL:
        case AP_RESPONSE_RESET_IN_PROGRESS:
                *flags |= 2;
                break;
        case AP_RESPONSE_MESSAGE_TOO_BIG:
        case AP_RESPONSE_REQ_FAC_NOT_INST:
                return -EINVAL;
        default:
                return -ENODEV;
        }
        return 0;
}

/**
 * ap_poll_queue(): Poll AP device for pending replies and send new messages.
 * @ap_dev: pointer to the bus device
 * @flags: pointer to control flags, bit 2^0 is set if another poll is
 *         required, bit 2^1 is set if the poll timer needs to get armed
 *
 * Poll AP device for pending replies and send new messages. If either
 * ap_poll_read or ap_poll_write returns -ENODEV unregister the device.
 * Returns 0.
 */
static inline int ap_poll_queue(struct ap_device *ap_dev, unsigned long *flags)
{
        int rc;

        rc = ap_poll_read(ap_dev, flags);
        if (rc)
                return rc;
        return ap_poll_write(ap_dev, flags);
}

/**
 * __ap_queue_message(): Queue a message to a device.
 * @ap_dev: pointer to the AP device
 * @ap_msg: the message to be queued
 *
 * Queue a message to a device. Returns 0 if successful.
 */
static int __ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
        struct ap_queue_status status;

        if (list_empty(&ap_dev->requestq) &&
            ap_dev->queue_count < ap_dev->queue_depth) {
                status = __ap_send(ap_dev->qid, ap_msg->psmid,
                                   ap_msg->message, ap_msg->length,
                                   ap_msg->special);
                switch (status.response_code) {
                case AP_RESPONSE_NORMAL:
                        list_add_tail(&ap_msg->list, &ap_dev->pendingq);
                        atomic_inc(&ap_poll_requests);
                        ap_dev->pendingq_count++;
                        ap_increase_queue_count(ap_dev);
                        ap_dev->total_request_count++;
                        break;
                case AP_RESPONSE_Q_FULL:
                case AP_RESPONSE_RESET_IN_PROGRESS:
                        list_add_tail(&ap_msg->list, &ap_dev->requestq);
                        ap_dev->requestq_count++;
                        ap_dev->total_request_count++;
                        return -EBUSY;
                case AP_RESPONSE_REQ_FAC_NOT_INST:
                case AP_RESPONSE_MESSAGE_TOO_BIG:
                        ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-EINVAL));
                        return -EINVAL;
                default:        /* Device is gone. */
                        ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
                        return -ENODEV;
                }
        } else {
                list_add_tail(&ap_msg->list, &ap_dev->requestq);
                ap_dev->requestq_count++;
                ap_dev->total_request_count++;
                return -EBUSY;
        }
        ap_schedule_poll_timer();
        return 0;
}

void ap_queue_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
        unsigned long flags;
        int rc;

        spin_lock_bh(&ap_dev->lock);
        if (!ap_dev->unregistered) {
                /* Make room on the queue by polling for finished requests. */
                rc = ap_poll_queue(ap_dev, &flags);
                if (!rc)
                        rc = __ap_queue_message(ap_dev, ap_msg);
                if (!rc)
                        wake_up(&ap_poll_wait);
                if (rc == -ENODEV)
                        ap_dev->unregistered = 1;
        } else {
                ap_dev->drv->receive(ap_dev, ap_msg, ERR_PTR(-ENODEV));
                rc = -ENODEV;
        }
        spin_unlock_bh(&ap_dev->lock);
        if (rc == -ENODEV)
                device_unregister(&ap_dev->device);
}
EXPORT_SYMBOL(ap_queue_message);

/**
 * ap_cancel_message(): Cancel a crypto request.
 * @ap_dev: The AP device that has the message queued
 * @ap_msg: The message that is to be removed
 *
 * Cancel a crypto request. This is done by removing the request
 * from the device pending or request queue. Note that the
 * request stays on the AP queue. When it finishes the message
 * reply will be discarded because the psmid can't be found.
 */
void ap_cancel_message(struct ap_device *ap_dev, struct ap_message *ap_msg)
{
        struct ap_message *tmp;

        spin_lock_bh(&ap_dev->lock);
        if (!list_empty(&ap_msg->list)) {
                list_for_each_entry(tmp, &ap_dev->pendingq, list)
                        if (tmp->psmid == ap_msg->psmid) {
                                ap_dev->pendingq_count--;
                                goto found;
                        }
                ap_dev->requestq_count--;
        found:
                list_del_init(&ap_msg->list);
        }
        spin_unlock_bh(&ap_dev->lock);
}
EXPORT_SYMBOL(ap_cancel_message);

/**
 * ap_poll_timeout(): AP receive polling for finished AP requests.
 * @unused: Unused pointer.
 *
 * Schedules the AP tasklet using a high resolution timer.
 */
static enum hrtimer_restart ap_poll_timeout(struct hrtimer *unused)
{
        tasklet_schedule(&ap_tasklet);
        return HRTIMER_NORESTART;
}

/**
 * ap_reset(): Reset a not responding AP device.
 * @ap_dev: Pointer to the AP device
 *
 * Reset a not responding AP device and move all requests from the
 * pending queue to the request queue.
 */
static void ap_reset(struct ap_device *ap_dev)
{
        int rc;

        ap_dev->reset = AP_RESET_IGNORE;
        atomic_sub(ap_dev->queue_count, &ap_poll_requests);
        ap_dev->queue_count = 0;
        list_splice_init(&ap_dev->pendingq, &ap_dev->requestq);
        ap_dev->requestq_count += ap_dev->pendingq_count;
        ap_dev->pendingq_count = 0;
        rc = ap_init_queue(ap_dev->qid);
        if (rc == -ENODEV)
                ap_dev->unregistered = 1;
}

static int __ap_poll_device(struct ap_device *ap_dev, unsigned long *flags)
{
        if (!ap_dev->unregistered) {
                if (ap_poll_queue(ap_dev, flags))
                        ap_dev->unregistered = 1;
                if (ap_dev->reset == AP_RESET_DO)
                        ap_reset(ap_dev);
        }
        return 0;
}

/**
 * ap_poll_all(): Poll all AP devices.
 * @dummy: Unused variable
 *
 * Poll all AP devices on the bus in a round robin fashion. Continue
 * polling until bit 2^0 of the control flags is not set. If bit 2^1
 * of the control flags has been set arm the poll timer.
 */
static void ap_poll_all(unsigned long dummy)
{
        unsigned long flags;
        struct ap_device *ap_dev;

        /* Reset the indicator if interrupts are used. Thus new interrupts can
         * be received. Doing it in the beginning of the tasklet is therefor
         * important that no requests on any AP get lost.
         */
        if (ap_using_interrupts())
                xchg((u8 *)ap_interrupt_indicator, 0);
        do {
                flags = 0;
                spin_lock(&ap_device_list_lock);
                list_for_each_entry(ap_dev, &ap_device_list, list) {
                        spin_lock(&ap_dev->lock);
                        __ap_poll_device(ap_dev, &flags);
                        spin_unlock(&ap_dev->lock);
                }
                spin_unlock(&ap_device_list_lock);
        } while (flags & 1);
        if (flags & 2)
                ap_schedule_poll_timer();
}

/**
 * ap_poll_thread(): Thread that polls for finished requests.
 * @data: Unused pointer
 *
 * AP bus poll thread. The purpose of this thread is to poll for
 * finished requests in a loop if there is a "free" cpu - that is
 * a cpu that doesn't have anything better to do. The polling stops
 * as soon as there is another task or if all messages have been
 * delivered.
 */
static int ap_poll_thread(void *data)
{
        DECLARE_WAITQUEUE(wait, current);
        unsigned long flags;
        int requests;
        struct ap_device *ap_dev;

        set_user_nice(current, 19);
        while (1) {
                if (ap_suspend_flag)
                        return 0;
                if (need_resched()) {
                        schedule();
                        continue;
                }
                add_wait_queue(&ap_poll_wait, &wait);
                set_current_state(TASK_INTERRUPTIBLE);
                if (kthread_should_stop())
                        break;
                requests = atomic_read(&ap_poll_requests);
                if (requests <= 0)
                        schedule();
                set_current_state(TASK_RUNNING);
                remove_wait_queue(&ap_poll_wait, &wait);

                flags = 0;
                spin_lock_bh(&ap_device_list_lock);
                list_for_each_entry(ap_dev, &ap_device_list, list) {
                        spin_lock(&ap_dev->lock);
                        __ap_poll_device(ap_dev, &flags);
                        spin_unlock(&ap_dev->lock);
                }
                spin_unlock_bh(&ap_device_list_lock);
        }
        set_current_state(TASK_RUNNING);
        remove_wait_queue(&ap_poll_wait, &wait);
        return 0;
}

static int ap_poll_thread_start(void)
{
        int rc;

        if (ap_using_interrupts() || ap_suspend_flag)
                return 0;
        mutex_lock(&ap_poll_thread_mutex);
        if (!ap_poll_kthread) {
                ap_poll_kthread = kthread_run(ap_poll_thread, NULL, "appoll");
                rc = IS_ERR(ap_poll_kthread) ? PTR_ERR(ap_poll_kthread) : 0;
                if (rc)
                        ap_poll_kthread = NULL;
        }
        else
                rc = 0;
        mutex_unlock(&ap_poll_thread_mutex);
        return rc;
}

static void ap_poll_thread_stop(void)
{
        mutex_lock(&ap_poll_thread_mutex);
        if (ap_poll_kthread) {
                kthread_stop(ap_poll_kthread);
                ap_poll_kthread = NULL;
        }
        mutex_unlock(&ap_poll_thread_mutex);
}

/**
 * ap_request_timeout(): Handling of request timeouts
 * @data: Holds the AP device.
 *
 * Handles request timeouts.
 */
static void ap_request_timeout(unsigned long data)
{
        struct ap_device *ap_dev = (struct ap_device *) data;

        if (ap_dev->reset == AP_RESET_ARMED) {
                ap_dev->reset = AP_RESET_DO;

                if (ap_using_interrupts())
                        tasklet_schedule(&ap_tasklet);
        }
}

static void ap_reset_domain(void)
{
        int i;

        if (ap_domain_index != -1)
                for (i = 0; i < AP_DEVICES; i++)
                        ap_reset_queue(AP_MKQID(i, ap_domain_index));
}

static void ap_reset_all(void)
{
        int i, j;

        for (i = 0; i < AP_DOMAINS; i++)
                for (j = 0; j < AP_DEVICES; j++)
                        ap_reset_queue(AP_MKQID(j, i));
}

static struct reset_call ap_reset_call = {
        .fn = ap_reset_all,
};

/**
 * ap_module_init(): The module initialization code.
 *
 * Initializes the module.
 */
int __init ap_module_init(void)
{
        int rc, i;

        if (ap_domain_index < -1 || ap_domain_index >= AP_DOMAINS) {
                pr_warning("%d is not a valid cryptographic domain\n",
                           ap_domain_index);
                return -EINVAL;
        }
        /* In resume callback we need to know if the user had set the domain.
         * If so, we can not just reset it.
         */
        if (ap_domain_index >= 0)
                user_set_domain = 1;

        if (ap_instructions_available() != 0) {
                pr_warning("The hardware system does not support "
                           "AP instructions\n");
                return -ENODEV;
        }
        if (ap_interrupts_available()) {
                isc_register(AP_ISC);
                ap_interrupt_indicator = s390_register_adapter_interrupt(
                        &ap_interrupt_handler, NULL, AP_ISC);
                if (IS_ERR(ap_interrupt_indicator)) {
                        ap_interrupt_indicator = NULL;
                        isc_unregister(AP_ISC);
                }
        }

        register_reset_call(&ap_reset_call);

        /* Create /sys/bus/ap. */
        rc = bus_register(&ap_bus_type);
        if (rc)
                goto out;
        for (i = 0; ap_bus_attrs[i]; i++) {
                rc = bus_create_file(&ap_bus_type, ap_bus_attrs[i]);
                if (rc)
                        goto out_bus;
        }

        /* Create /sys/devices/ap. */
        ap_root_device = root_device_register("ap");
        rc = IS_ERR(ap_root_device) ? PTR_ERR(ap_root_device) : 0;
        if (rc)
                goto out_bus;

        ap_work_queue = create_singlethread_workqueue("kapwork");
        if (!ap_work_queue) {
                rc = -ENOMEM;
                goto out_root;
        }

        if (ap_select_domain() == 0)
                ap_scan_bus(NULL);

        /* Setup the AP bus rescan timer. */
        init_timer(&ap_config_timer);
        ap_config_timer.function = ap_config_timeout;
        ap_config_timer.data = 0;
        ap_config_timer.expires = jiffies + ap_config_time * HZ;
        add_timer(&ap_config_timer);

        /* Setup the high resultion poll timer.
         * If we are running under z/VM adjust polling to z/VM polling rate.
         */
        if (MACHINE_IS_VM)
                poll_timeout = 1500000;
        spin_lock_init(&ap_poll_timer_lock);
        hrtimer_init(&ap_poll_timer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
        ap_poll_timer.function = ap_poll_timeout;

        /* Start the low priority AP bus poll thread. */
        if (ap_thread_flag) {
                rc = ap_poll_thread_start();
                if (rc)
                        goto out_work;
        }

        return 0;

out_work:
        del_timer_sync(&ap_config_timer);
        hrtimer_cancel(&ap_poll_timer);
        destroy_workqueue(ap_work_queue);
out_root:
        root_device_unregister(ap_root_device);
out_bus:
        while (i--)
                bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
        bus_unregister(&ap_bus_type);
out:
        unregister_reset_call(&ap_reset_call);
        if (ap_using_interrupts()) {
                s390_unregister_adapter_interrupt(ap_interrupt_indicator, AP_ISC);
                isc_unregister(AP_ISC);
        }
        return rc;
}

static int __ap_match_all(struct device *dev, void *data)
{
        return 1;
}

/**
 * ap_modules_exit(): The module termination code
 *
 * Terminates the module.
 */
void ap_module_exit(void)
{
        int i;
        struct device *dev;

        ap_reset_domain();
        ap_poll_thread_stop();
        del_timer_sync(&ap_config_timer);
        hrtimer_cancel(&ap_poll_timer);
        destroy_workqueue(ap_work_queue);
        tasklet_kill(&ap_tasklet);
        root_device_unregister(ap_root_device);
        while ((dev = bus_find_device(&ap_bus_type, NULL, NULL,
                    __ap_match_all)))
        {
                device_unregister(dev);
                put_device(dev);
        }
        for (i = 0; ap_bus_attrs[i]; i++)
                bus_remove_file(&ap_bus_type, ap_bus_attrs[i]);
        bus_unregister(&ap_bus_type);
        unregister_reset_call(&ap_reset_call);
        if (ap_using_interrupts()) {
                s390_unregister_adapter_interrupt(ap_interrupt_indicator, AP_ISC);
                isc_unregister(AP_ISC);
        }
}

#ifndef CONFIG_ZCRYPT_MONOLITHIC
module_init(ap_module_init);
module_exit(ap_module_exit);
#endif