drivers/usb/host/ehci-omap.c

   1 /*
   2  * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
   3  *
   4  * Bus Glue for the EHCI controllers in OMAP3/4
   5  * Tested on several OMAP3 boards, and OMAP4 Pandaboard
   6  *
   7  * Copyright (C) 2007-2011 Texas Instruments, Inc.
   8  *      Author: Vikram Pandita <vikram.pandita@ti.com>
   9  *      Author: Anand Gadiyar <gadiyar@ti.com>
  10  *      Author: Keshava Munegowda <keshava_mgowda@ti.com>
  11  *
  12  * Copyright (C) 2009 Nokia Corporation
  13  *      Contact: Felipe Balbi <felipe.balbi@nokia.com>
  14  *
  15  * Based on "ehci-fsl.c" and "ehci-au1xxx.c" ehci glue layers
  16  *
  17  * This program is free software; you can redistribute it and/or modify
  18  * it under the terms of the GNU General Public License as published by
  19  * the Free Software Foundation; either version 2 of the License, or
  20  * (at your option) any later version.
  21  *
  22  * This program is distributed in the hope that it will be useful,
  23  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  24  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  25  * GNU General Public License for more details.
  26  *
  27  * You should have received a copy of the GNU General Public License
  28  * along with this program; if not, write to the Free Software
  29  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
  30  *
  31  * TODO (last updated Feb 27, 2010):
  32  *      - add kernel-doc
  33  *      - enable AUTOIDLE
  34  *      - add suspend/resume
  35  *      - add HSIC and TLL support
  36  *      - convert to use hwmod and runtime PM
  37  */
  38
  39 #include <linux/platform_device.h>
  40 #include <linux/slab.h>
  41 #include <linux/usb/ulpi.h>
  42 #include <plat/usb.h>
  43
  44 /* EHCI Register Set */
  45 #define EHCI_INSNREG04                                  (0xA0)
  46 #define EHCI_INSNREG04_DISABLE_UNSUSPEND                (1 << 5)
  47 #define EHCI_INSNREG05_ULPI                             (0xA4)
  48 #define EHCI_INSNREG05_ULPI_CONTROL_SHIFT               31
  49 #define EHCI_INSNREG05_ULPI_PORTSEL_SHIFT               24
  50 #define EHCI_INSNREG05_ULPI_OPSEL_SHIFT                 22
  51 #define EHCI_INSNREG05_ULPI_REGADD_SHIFT                16
  52 #define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT             8
  53 #define EHCI_INSNREG05_ULPI_WRDATA_SHIFT                0
  54
  55 /*-------------------------------------------------------------------------*/
  56
  57 static const struct hc_driver ehci_omap_hc_driver;
  58
  59
  60 static inline void ehci_write(void __iomem *base, u32 reg, u32 val)
  61 {
  62         __raw_writel(val, base + reg);
  63 }
  64
  65 static inline u32 ehci_read(void __iomem *base, u32 reg)
  66 {
  67         return __raw_readl(base + reg);
  68 }
  69
  70 static void omap_ehci_soft_phy_reset(struct platform_device *pdev, u8 port)
  71 {
  72         struct usb_hcd  *hcd = dev_get_drvdata(&pdev->dev);
  73         unsigned long timeout = jiffies + msecs_to_jiffies(1000);
  74         unsigned reg = 0;
  75
  76         reg = ULPI_FUNC_CTRL_RESET
  77                 /* FUNCTION_CTRL_SET register */
  78                 | (ULPI_SET(ULPI_FUNC_CTRL) << EHCI_INSNREG05_ULPI_REGADD_SHIFT)
  79                 /* Write */
  80                 | (2 << EHCI_INSNREG05_ULPI_OPSEL_SHIFT)
  81                 /* PORTn */
  82                 | ((port + 1) << EHCI_INSNREG05_ULPI_PORTSEL_SHIFT)
  83                 /* start ULPI access*/
  84                 | (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT);
  85
  86         ehci_write(hcd->regs, EHCI_INSNREG05_ULPI, reg);
  87
  88         /* Wait for ULPI access completion */
  89         while ((ehci_read(hcd->regs, EHCI_INSNREG05_ULPI)
  90                         & (1 << EHCI_INSNREG05_ULPI_CONTROL_SHIFT))) {
  91                 cpu_relax();
  92
  93                 if (time_after(jiffies, timeout)) {
  94                         dev_dbg(&pdev->dev, "phy reset operation timed out\n");
  95                         break;
  96                 }
  97         }
  98 }
  99
 100
 101 /* configure so an HC device and id are always provided */
 102 /* always called with process context; sleeping is OK */
 103
 104 /**
 105  * ehci_hcd_omap_probe - initialize TI-based HCDs
 106  *
 107  * Allocates basic resources for this USB host controller, and
 108  * then invokes the start() method for the HCD associated with it
 109  * through the hotplug entry's driver_data.
 110  */
 111 static int ehci_hcd_omap_probe(struct platform_device *pdev)
 112 {
 113         struct device                           *dev = &pdev->dev;
 114         struct ehci_hcd_omap_platform_data      *pdata = dev->platform_data;
 115         struct resource                         *res;
 116         struct usb_hcd                          *hcd;
 117         void __iomem                            *regs;
 118         struct ehci_hcd                         *omap_ehci;
 119         int                                     ret = -ENODEV;
 120         int                                     irq;
 121
 122         if (usb_disabled())
 123                 return -ENODEV;
 124
 125         if (!dev->parent) {
 126                 dev_err(dev, "Missing parent device\n");
 127                 return -ENODEV;
 128         }
 129
 130         irq = platform_get_irq_byname(pdev, "ehci-irq");
 131         if (irq < 0) {
 132                 dev_err(dev, "EHCI irq failed\n");
 133                 return -ENODEV;
 134         }
 135
 136         res =  platform_get_resource_byname(pdev,
 137                                 IORESOURCE_MEM, "ehci");
 138         if (!res) {
 139                 dev_err(dev, "UHH EHCI get resource failed\n");
 140                 return -ENODEV;
 141         }
 142
 143         regs = ioremap(res->start, resource_size(res));
 144         if (!regs) {
 145                 dev_err(dev, "UHH EHCI ioremap failed\n");
 146                 return -ENOMEM;
 147         }
 148
 149         hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
 150                         dev_name(dev));
 151         if (!hcd) {
 152                 dev_err(dev, "failed to create hcd with err %d\n", ret);
 153                 ret = -ENOMEM;
 154                 goto err_io;
 155         }
 156
 157         hcd->rsrc_start = res->start;
 158         hcd->rsrc_len = resource_size(res);
 159         hcd->regs = regs;
 160
 161         ret = omap_usbhs_enable(dev);
 162         if (ret) {
 163                 dev_err(dev, "failed to start usbhs with err %d\n", ret);
 164                 goto err_enable;
 165         }
 166
 167         /*
 168          * An undocumented "feature" in the OMAP3 EHCI controller,
 169          * causes suspended ports to be taken out of suspend when
 170          * the USBCMD.Run/Stop bit is cleared (for example when
 171          * we do ehci_bus_suspend).
 172          * This breaks suspend-resume if the root-hub is allowed
 173          * to suspend. Writing 1 to this undocumented register bit
 174          * disables this feature and restores normal behavior.
 175          */
 176         ehci_write(regs, EHCI_INSNREG04,
 177                                 EHCI_INSNREG04_DISABLE_UNSUSPEND);
 178
 179         /* Soft reset the PHY using PHY reset command over ULPI */
 180         if (pdata->port_mode[0] == OMAP_EHCI_PORT_MODE_PHY)
 181                 omap_ehci_soft_phy_reset(pdev, 0);
 182         if (pdata->port_mode[1] == OMAP_EHCI_PORT_MODE_PHY)
 183                 omap_ehci_soft_phy_reset(pdev, 1);
 184
 185         omap_ehci = hcd_to_ehci(hcd);
 186         omap_ehci->sbrn = 0x20;
 187
 188         /* we know this is the memory we want, no need to ioremap again */
 189         omap_ehci->caps = hcd->regs;
 190         omap_ehci->regs = hcd->regs
 191                         + HC_LENGTH(readl(&omap_ehci->caps->hc_capbase));
 192
 193         dbg_hcs_params(omap_ehci, "reset");
 194         dbg_hcc_params(omap_ehci, "reset");
 195
 196         /* cache this readonly data; minimize chip reads */
 197         omap_ehci->hcs_params = readl(&omap_ehci->caps->hcs_params);
 198
 199         ret = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
 200         if (ret) {
 201                 dev_err(dev, "failed to add hcd with err %d\n", ret);
 202                 goto err_add_hcd;
 203         }
 204
 205         /* root ports should always stay powered */
 206         ehci_port_power(omap_ehci, 1);
 207
 208         return 0;
 209
 210 err_add_hcd:
 211         omap_usbhs_disable(dev);
 212
 213 err_enable:
 214         usb_put_hcd(hcd);
 215
 216 err_io:
 217         return ret;
 218 }
 219
 220
 221 /**
 222  * ehci_hcd_omap_remove - shutdown processing for EHCI HCDs
 223  * @pdev: USB Host Controller being removed
 224  *
 225  * Reverses the effect of usb_ehci_hcd_omap_probe(), first invoking
 226  * the HCD's stop() method.  It is always called from a thread
 227  * context, normally "rmmod", "apmd", or something similar.
 228  */
 229 static int ehci_hcd_omap_remove(struct platform_device *pdev)
 230 {
 231         struct device *dev      = &pdev->dev;
 232         struct usb_hcd *hcd     = dev_get_drvdata(dev);
 233
 234         usb_remove_hcd(hcd);
 235         omap_usbhs_disable(dev);
 236         usb_put_hcd(hcd);
 237         return 0;
 238 }
 239
 240 static void ehci_hcd_omap_shutdown(struct platform_device *pdev)
 241 {
 242         struct usb_hcd *hcd = dev_get_drvdata(&pdev->dev);
 243
 244         if (hcd->driver->shutdown)
 245                 hcd->driver->shutdown(hcd);
 246 }
 247
 248 static struct platform_driver ehci_hcd_omap_driver = {
 249         .probe                  = ehci_hcd_omap_probe,
 250         .remove                 = ehci_hcd_omap_remove,
 251         .shutdown               = ehci_hcd_omap_shutdown,
 252         /*.suspend              = ehci_hcd_omap_suspend, */
 253         /*.resume               = ehci_hcd_omap_resume, */
 254         .driver = {
 255                 .name           = "ehci-omap",
 256         }
 257 };
 258
 259 /*-------------------------------------------------------------------------*/
 260
 261 static const struct hc_driver ehci_omap_hc_driver = {
 262         .description            = hcd_name,
 263         .product_desc           = "OMAP-EHCI Host Controller",
 264         .hcd_priv_size          = sizeof(struct ehci_hcd),
 265
 266         /*
 267          * generic hardware linkage
 268          */
 269         .irq                    = ehci_irq,
 270         .flags                  = HCD_MEMORY | HCD_USB2,
 271
 272         /*
 273          * basic lifecycle operations
 274          */
 275         .reset                  = ehci_init,
 276         .start                  = ehci_run,
 277         .stop                   = ehci_stop,
 278         .shutdown               = ehci_shutdown,
 279
 280         /*
 281          * managing i/o requests and associated device resources
 282          */
 283         .urb_enqueue            = ehci_urb_enqueue,
 284         .urb_dequeue            = ehci_urb_dequeue,
 285         .endpoint_disable       = ehci_endpoint_disable,
 286         .endpoint_reset         = ehci_endpoint_reset,
 287
 288         /*
 289          * scheduling support
 290          */
 291         .get_frame_number       = ehci_get_frame,
 292
 293         /*
 294          * root hub support
 295          */
 296         .hub_status_data        = ehci_hub_status_data,
 297         .hub_control            = ehci_hub_control,
 298         .bus_suspend            = ehci_bus_suspend,
 299         .bus_resume             = ehci_bus_resume,
 300
 301         .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
 302 };
 303
 304 MODULE_ALIAS("platform:omap-ehci");
 305 MODULE_AUTHOR("Texas Instruments, Inc.");
 306 MODULE_AUTHOR("Felipe Balbi <felipe.balbi@nokia.com>");
 307