Merge branch 'for-greg' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb...
[zen-stable.git] / include / linux / atmel_tc.h
blob53ba65e30caa2b61f9f6ab080ac9c5c1907a4b8e
1 /*
2 * Timer/Counter Unit (TC) registers.
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License as published by
6 * the Free Software Foundation; either version 2 of the License, or
7 * (at your option) any later version.
8 */
10 #ifndef ATMEL_TC_H
11 #define ATMEL_TC_H
13 #include <linux/compiler.h>
14 #include <linux/list.h>
17 * Many 32-bit Atmel SOCs include one or more TC blocks, each of which holds
18 * three general-purpose 16-bit timers. These timers share one register bank.
19 * Depending on the SOC, each timer may have its own clock and IRQ, or those
20 * may be shared by the whole TC block.
22 * These TC blocks may have up to nine external pins: TCLK0..2 signals for
23 * clocks or clock gates, and per-timer TIOA and TIOB signals used for PWM
24 * or triggering. Those pins need to be set up for use with the TC block,
25 * else they will be used as GPIOs or for a different controller.
27 * Although we expect each TC block to have a platform_device node, those
28 * nodes are not what drivers bind to. Instead, they ask for a specific
29 * TC block, by number ... which is a common approach on systems with many
30 * timers. Then they use clk_get() and platform_get_irq() to get clock and
31 * IRQ resources.
34 struct clk;
36 /**
37 * struct atmel_tc - information about a Timer/Counter Block
38 * @pdev: physical device
39 * @iomem: resource associated with the I/O register
40 * @regs: mapping through which the I/O registers can be accessed
41 * @irq: irq for each of the three channels
42 * @clk: internal clock source for each of the three channels
43 * @node: list node, for tclib internal use
45 * On some platforms, each TC channel has its own clocks and IRQs,
46 * while on others, all TC channels share the same clock and IRQ.
47 * Drivers should clk_enable() all the clocks they need even though
48 * all the entries in @clk may point to the same physical clock.
49 * Likewise, drivers should request irqs independently for each
50 * channel, but they must use IRQF_SHARED in case some of the entries
51 * in @irq are actually the same IRQ.
53 struct atmel_tc {
54 struct platform_device *pdev;
55 struct resource *iomem;
56 void __iomem *regs;
57 int irq[3];
58 struct clk *clk[3];
59 struct list_head node;
62 extern struct atmel_tc *atmel_tc_alloc(unsigned block, const char *name);
63 extern void atmel_tc_free(struct atmel_tc *tc);
65 /* platform-specific ATMEL_TC_TIMER_CLOCKx divisors (0 means 32KiHz) */
66 extern const u8 atmel_tc_divisors[5];
70 * Two registers have block-wide controls. These are: configuring the three
71 * "external" clocks (or event sources) used by the timer channels; and
72 * synchronizing the timers by resetting them all at once.
74 * "External" can mean "external to chip" using the TCLK0, TCLK1, or TCLK2
75 * signals. Or, it can mean "external to timer", using the TIOA output from
76 * one of the other two timers that's being run in waveform mode.
79 #define ATMEL_TC_BCR 0xc0 /* TC Block Control Register */
80 #define ATMEL_TC_SYNC (1 << 0) /* synchronize timers */
82 #define ATMEL_TC_BMR 0xc4 /* TC Block Mode Register */
83 #define ATMEL_TC_TC0XC0S (3 << 0) /* external clock 0 source */
84 #define ATMEL_TC_TC0XC0S_TCLK0 (0 << 0)
85 #define ATMEL_TC_TC0XC0S_NONE (1 << 0)
86 #define ATMEL_TC_TC0XC0S_TIOA1 (2 << 0)
87 #define ATMEL_TC_TC0XC0S_TIOA2 (3 << 0)
88 #define ATMEL_TC_TC1XC1S (3 << 2) /* external clock 1 source */
89 #define ATMEL_TC_TC1XC1S_TCLK1 (0 << 2)
90 #define ATMEL_TC_TC1XC1S_NONE (1 << 2)
91 #define ATMEL_TC_TC1XC1S_TIOA0 (2 << 2)
92 #define ATMEL_TC_TC1XC1S_TIOA2 (3 << 2)
93 #define ATMEL_TC_TC2XC2S (3 << 4) /* external clock 2 source */
94 #define ATMEL_TC_TC2XC2S_TCLK2 (0 << 4)
95 #define ATMEL_TC_TC2XC2S_NONE (1 << 4)
96 #define ATMEL_TC_TC2XC2S_TIOA0 (2 << 4)
97 #define ATMEL_TC_TC2XC2S_TIOA1 (3 << 4)
101 * Each TC block has three "channels", each with one counter and controls.
103 * Note that the semantics of ATMEL_TC_TIMER_CLOCKx (input clock selection
104 * when it's not "external") is silicon-specific. AT91 platforms use one
105 * set of definitions; AVR32 platforms use a different set. Don't hard-wire
106 * such knowledge into your code, use the global "atmel_tc_divisors" ...
107 * where index N is the divisor for clock N+1, else zero to indicate it uses
108 * the 32 KiHz clock.
110 * The timers can be chained in various ways, and operated in "waveform"
111 * generation mode (including PWM) or "capture" mode (to time events). In
112 * both modes, behavior can be configured in many ways.
114 * Each timer has two I/O pins, TIOA and TIOB. Waveform mode uses TIOA as a
115 * PWM output, and TIOB as either another PWM or as a trigger. Capture mode
116 * uses them only as inputs.
118 #define ATMEL_TC_CHAN(idx) ((idx)*0x40)
119 #define ATMEL_TC_REG(idx, reg) (ATMEL_TC_CHAN(idx) + ATMEL_TC_ ## reg)
121 #define ATMEL_TC_CCR 0x00 /* Channel Control Register */
122 #define ATMEL_TC_CLKEN (1 << 0) /* clock enable */
123 #define ATMEL_TC_CLKDIS (1 << 1) /* clock disable */
124 #define ATMEL_TC_SWTRG (1 << 2) /* software trigger */
126 #define ATMEL_TC_CMR 0x04 /* Channel Mode Register */
128 /* Both modes share some CMR bits */
129 #define ATMEL_TC_TCCLKS (7 << 0) /* clock source */
130 #define ATMEL_TC_TIMER_CLOCK1 (0 << 0)
131 #define ATMEL_TC_TIMER_CLOCK2 (1 << 0)
132 #define ATMEL_TC_TIMER_CLOCK3 (2 << 0)
133 #define ATMEL_TC_TIMER_CLOCK4 (3 << 0)
134 #define ATMEL_TC_TIMER_CLOCK5 (4 << 0)
135 #define ATMEL_TC_XC0 (5 << 0)
136 #define ATMEL_TC_XC1 (6 << 0)
137 #define ATMEL_TC_XC2 (7 << 0)
138 #define ATMEL_TC_CLKI (1 << 3) /* clock invert */
139 #define ATMEL_TC_BURST (3 << 4) /* clock gating */
140 #define ATMEL_TC_GATE_NONE (0 << 4)
141 #define ATMEL_TC_GATE_XC0 (1 << 4)
142 #define ATMEL_TC_GATE_XC1 (2 << 4)
143 #define ATMEL_TC_GATE_XC2 (3 << 4)
144 #define ATMEL_TC_WAVE (1 << 15) /* true = Waveform mode */
146 /* CAPTURE mode CMR bits */
147 #define ATMEL_TC_LDBSTOP (1 << 6) /* counter stops on RB load */
148 #define ATMEL_TC_LDBDIS (1 << 7) /* counter disable on RB load */
149 #define ATMEL_TC_ETRGEDG (3 << 8) /* external trigger edge */
150 #define ATMEL_TC_ETRGEDG_NONE (0 << 8)
151 #define ATMEL_TC_ETRGEDG_RISING (1 << 8)
152 #define ATMEL_TC_ETRGEDG_FALLING (2 << 8)
153 #define ATMEL_TC_ETRGEDG_BOTH (3 << 8)
154 #define ATMEL_TC_ABETRG (1 << 10) /* external trigger is TIOA? */
155 #define ATMEL_TC_CPCTRG (1 << 14) /* RC compare trigger enable */
156 #define ATMEL_TC_LDRA (3 << 16) /* RA loading edge (of TIOA) */
157 #define ATMEL_TC_LDRA_NONE (0 << 16)
158 #define ATMEL_TC_LDRA_RISING (1 << 16)
159 #define ATMEL_TC_LDRA_FALLING (2 << 16)
160 #define ATMEL_TC_LDRA_BOTH (3 << 16)
161 #define ATMEL_TC_LDRB (3 << 18) /* RB loading edge (of TIOA) */
162 #define ATMEL_TC_LDRB_NONE (0 << 18)
163 #define ATMEL_TC_LDRB_RISING (1 << 18)
164 #define ATMEL_TC_LDRB_FALLING (2 << 18)
165 #define ATMEL_TC_LDRB_BOTH (3 << 18)
167 /* WAVEFORM mode CMR bits */
168 #define ATMEL_TC_CPCSTOP (1 << 6) /* RC compare stops counter */
169 #define ATMEL_TC_CPCDIS (1 << 7) /* RC compare disables counter */
170 #define ATMEL_TC_EEVTEDG (3 << 8) /* external event edge */
171 #define ATMEL_TC_EEVTEDG_NONE (0 << 8)
172 #define ATMEL_TC_EEVTEDG_RISING (1 << 8)
173 #define ATMEL_TC_EEVTEDG_FALLING (2 << 8)
174 #define ATMEL_TC_EEVTEDG_BOTH (3 << 8)
175 #define ATMEL_TC_EEVT (3 << 10) /* external event source */
176 #define ATMEL_TC_EEVT_TIOB (0 << 10)
177 #define ATMEL_TC_EEVT_XC0 (1 << 10)
178 #define ATMEL_TC_EEVT_XC1 (2 << 10)
179 #define ATMEL_TC_EEVT_XC2 (3 << 10)
180 #define ATMEL_TC_ENETRG (1 << 12) /* external event is trigger */
181 #define ATMEL_TC_WAVESEL (3 << 13) /* waveform type */
182 #define ATMEL_TC_WAVESEL_UP (0 << 13)
183 #define ATMEL_TC_WAVESEL_UPDOWN (1 << 13)
184 #define ATMEL_TC_WAVESEL_UP_AUTO (2 << 13)
185 #define ATMEL_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
186 #define ATMEL_TC_ACPA (3 << 16) /* RA compare changes TIOA */
187 #define ATMEL_TC_ACPA_NONE (0 << 16)
188 #define ATMEL_TC_ACPA_SET (1 << 16)
189 #define ATMEL_TC_ACPA_CLEAR (2 << 16)
190 #define ATMEL_TC_ACPA_TOGGLE (3 << 16)
191 #define ATMEL_TC_ACPC (3 << 18) /* RC compare changes TIOA */
192 #define ATMEL_TC_ACPC_NONE (0 << 18)
193 #define ATMEL_TC_ACPC_SET (1 << 18)
194 #define ATMEL_TC_ACPC_CLEAR (2 << 18)
195 #define ATMEL_TC_ACPC_TOGGLE (3 << 18)
196 #define ATMEL_TC_AEEVT (3 << 20) /* external event changes TIOA */
197 #define ATMEL_TC_AEEVT_NONE (0 << 20)
198 #define ATMEL_TC_AEEVT_SET (1 << 20)
199 #define ATMEL_TC_AEEVT_CLEAR (2 << 20)
200 #define ATMEL_TC_AEEVT_TOGGLE (3 << 20)
201 #define ATMEL_TC_ASWTRG (3 << 22) /* software trigger changes TIOA */
202 #define ATMEL_TC_ASWTRG_NONE (0 << 22)
203 #define ATMEL_TC_ASWTRG_SET (1 << 22)
204 #define ATMEL_TC_ASWTRG_CLEAR (2 << 22)
205 #define ATMEL_TC_ASWTRG_TOGGLE (3 << 22)
206 #define ATMEL_TC_BCPB (3 << 24) /* RB compare changes TIOB */
207 #define ATMEL_TC_BCPB_NONE (0 << 24)
208 #define ATMEL_TC_BCPB_SET (1 << 24)
209 #define ATMEL_TC_BCPB_CLEAR (2 << 24)
210 #define ATMEL_TC_BCPB_TOGGLE (3 << 24)
211 #define ATMEL_TC_BCPC (3 << 26) /* RC compare changes TIOB */
212 #define ATMEL_TC_BCPC_NONE (0 << 26)
213 #define ATMEL_TC_BCPC_SET (1 << 26)
214 #define ATMEL_TC_BCPC_CLEAR (2 << 26)
215 #define ATMEL_TC_BCPC_TOGGLE (3 << 26)
216 #define ATMEL_TC_BEEVT (3 << 28) /* external event changes TIOB */
217 #define ATMEL_TC_BEEVT_NONE (0 << 28)
218 #define ATMEL_TC_BEEVT_SET (1 << 28)
219 #define ATMEL_TC_BEEVT_CLEAR (2 << 28)
220 #define ATMEL_TC_BEEVT_TOGGLE (3 << 28)
221 #define ATMEL_TC_BSWTRG (3 << 30) /* software trigger changes TIOB */
222 #define ATMEL_TC_BSWTRG_NONE (0 << 30)
223 #define ATMEL_TC_BSWTRG_SET (1 << 30)
224 #define ATMEL_TC_BSWTRG_CLEAR (2 << 30)
225 #define ATMEL_TC_BSWTRG_TOGGLE (3 << 30)
227 #define ATMEL_TC_CV 0x10 /* counter Value */
228 #define ATMEL_TC_RA 0x14 /* register A */
229 #define ATMEL_TC_RB 0x18 /* register B */
230 #define ATMEL_TC_RC 0x1c /* register C */
232 #define ATMEL_TC_SR 0x20 /* status (read-only) */
233 /* Status-only flags */
234 #define ATMEL_TC_CLKSTA (1 << 16) /* clock enabled */
235 #define ATMEL_TC_MTIOA (1 << 17) /* TIOA mirror */
236 #define ATMEL_TC_MTIOB (1 << 18) /* TIOB mirror */
238 #define ATMEL_TC_IER 0x24 /* interrupt enable (write-only) */
239 #define ATMEL_TC_IDR 0x28 /* interrupt disable (write-only) */
240 #define ATMEL_TC_IMR 0x2c /* interrupt mask (read-only) */
242 /* Status and IRQ flags */
243 #define ATMEL_TC_COVFS (1 << 0) /* counter overflow */
244 #define ATMEL_TC_LOVRS (1 << 1) /* load overrun */
245 #define ATMEL_TC_CPAS (1 << 2) /* RA compare */
246 #define ATMEL_TC_CPBS (1 << 3) /* RB compare */
247 #define ATMEL_TC_CPCS (1 << 4) /* RC compare */
248 #define ATMEL_TC_LDRAS (1 << 5) /* RA loading */
249 #define ATMEL_TC_LDRBS (1 << 6) /* RB loading */
250 #define ATMEL_TC_ETRGS (1 << 7) /* external trigger */
252 #endif