?  search:
summary | log | graphiclog1 | graphiclog2 | commit | commitdiff | tree | refs | edit | fork
blame | history | raw | HEAD
eeepc-wmi: add wlan key found on 1015P
[zen-stable.git] / drivers / i2c / busses / i2c-omap.c
blob58a58c7eaa17d6eb7fac8b2ca6014110e0e3f225
1 /*
2 * TI OMAP I2C master mode driver
3 *
4 * Copyright (C) 2003 MontaVista Software, Inc.
5 * Copyright (C) 2005 Nokia Corporation
6 * Copyright (C) 2004 - 2007 Texas Instruments.
7 *
8 * Originally written by MontaVista Software, Inc.
9 * Additional contributions by:
10 * Tony Lindgren <tony@atomide.com>
11 * Imre Deak <imre.deak@nokia.com>
12 * Juha Yrjölä <juha.yrjola@solidboot.com>
13 * Syed Khasim <x0khasim@ti.com>
14 * Nishant Menon <nm@ti.com>
15 *
16 * This program is free software; you can redistribute it and/or modify
17 * it under the terms of the GNU General Public License as published by
18 * the Free Software Foundation; either version 2 of the License, or
19 * (at your option) any later version.
20 *
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
25 *
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
29 */
30
31 #include <linux/module.h>
32 #include <linux/delay.h>
33 #include <linux/i2c.h>
34 #include <linux/err.h>
35 #include <linux/interrupt.h>
36 #include <linux/completion.h>
37 #include <linux/platform_device.h>
38 #include <linux/clk.h>
39 #include <linux/io.h>
40 #include <linux/slab.h>
41 #include <linux/i2c-omap.h>
42 #include <linux/pm_runtime.h>
43
44 /* I2C controller revisions */
45 #define OMAP_I2C_REV_2 0x20
46
47 /* I2C controller revisions present on specific hardware */
48 #define OMAP_I2C_REV_ON_2430 0x36
49 #define OMAP_I2C_REV_ON_3430 0x3C
50 #define OMAP_I2C_REV_ON_4430 0x40
51
52 /* timeout waiting for the controller to respond */
53 #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
54
55 /* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
56 enum {
57 OMAP_I2C_REV_REG = 0,
58 OMAP_I2C_IE_REG,
59 OMAP_I2C_STAT_REG,
60 OMAP_I2C_IV_REG,
61 OMAP_I2C_WE_REG,
62 OMAP_I2C_SYSS_REG,
63 OMAP_I2C_BUF_REG,
64 OMAP_I2C_CNT_REG,
65 OMAP_I2C_DATA_REG,
66 OMAP_I2C_SYSC_REG,
67 OMAP_I2C_CON_REG,
68 OMAP_I2C_OA_REG,
69 OMAP_I2C_SA_REG,
70 OMAP_I2C_PSC_REG,
71 OMAP_I2C_SCLL_REG,
72 OMAP_I2C_SCLH_REG,
73 OMAP_I2C_SYSTEST_REG,
74 OMAP_I2C_BUFSTAT_REG,
75 OMAP_I2C_REVNB_LO,
76 OMAP_I2C_REVNB_HI,
77 OMAP_I2C_IRQSTATUS_RAW,
78 OMAP_I2C_IRQENABLE_SET,
79 OMAP_I2C_IRQENABLE_CLR,
80 };
81
82 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */
83 #define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */
84 #define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */
85 #define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */
86 #define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */
87 #define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */
88 #define OMAP_I2C_IE_NACK (1 << 1) /* No ack interrupt enable */
89 #define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */
90
91 /* I2C Status Register (OMAP_I2C_STAT): */
92 #define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */
93 #define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */
94 #define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */
95 #define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */
96 #define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */
97 #define OMAP_I2C_STAT_AAS (1 << 9) /* Address as slave */
98 #define OMAP_I2C_STAT_AD0 (1 << 8) /* Address zero */
99 #define OMAP_I2C_STAT_XRDY (1 << 4) /* Transmit data ready */
100 #define OMAP_I2C_STAT_RRDY (1 << 3) /* Receive data ready */
101 #define OMAP_I2C_STAT_ARDY (1 << 2) /* Register access ready */
102 #define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */
103 #define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */
104
105 /* I2C WE wakeup enable register */
106 #define OMAP_I2C_WE_XDR_WE (1 << 14) /* TX drain wakup */
107 #define OMAP_I2C_WE_RDR_WE (1 << 13) /* RX drain wakeup */
108 #define OMAP_I2C_WE_AAS_WE (1 << 9) /* Address as slave wakeup*/
109 #define OMAP_I2C_WE_BF_WE (1 << 8) /* Bus free wakeup */
110 #define OMAP_I2C_WE_STC_WE (1 << 6) /* Start condition wakeup */
111 #define OMAP_I2C_WE_GC_WE (1 << 5) /* General call wakeup */
112 #define OMAP_I2C_WE_DRDY_WE (1 << 3) /* TX/RX data ready wakeup */
113 #define OMAP_I2C_WE_ARDY_WE (1 << 2) /* Reg access ready wakeup */
114 #define OMAP_I2C_WE_NACK_WE (1 << 1) /* No acknowledgment wakeup */
115 #define OMAP_I2C_WE_AL_WE (1 << 0) /* Arbitration lost wakeup */
116
117 #define OMAP_I2C_WE_ALL (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \
118 OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \
119 OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \
120 OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \
121 OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE)
122
123 /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */
124 #define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */
125 #define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */
126 #define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */
127 #define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */
128
129 /* I2C Configuration Register (OMAP_I2C_CON): */
130 #define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */
131 #define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */
132 #define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */
133 #define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */
134 #define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */
135 #define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */
136 #define OMAP_I2C_CON_XA (1 << 8) /* Expand address */
137 #define OMAP_I2C_CON_RM (1 << 2) /* Repeat mode (master only) */
138 #define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */
139 #define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */
140
141 /* I2C SCL time value when Master */
142 #define OMAP_I2C_SCLL_HSSCLL 8
143 #define OMAP_I2C_SCLH_HSSCLH 8
144
145 /* I2C System Test Register (OMAP_I2C_SYSTEST): */
146 #ifdef DEBUG
147 #define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */
148 #define OMAP_I2C_SYSTEST_FREE (1 << 14) /* Free running mode */
149 #define OMAP_I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */
150 #define OMAP_I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */
151 #define OMAP_I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense in */
152 #define OMAP_I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive out */
153 #define OMAP_I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense in */
154 #define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */
155 #endif
156
157 /* OCP_SYSSTATUS bit definitions */
158 #define SYSS_RESETDONE_MASK (1 << 0)
159
160 /* OCP_SYSCONFIG bit definitions */
161 #define SYSC_CLOCKACTIVITY_MASK (0x3 << 8)
162 #define SYSC_SIDLEMODE_MASK (0x3 << 3)
163 #define SYSC_ENAWAKEUP_MASK (1 << 2)
164 #define SYSC_SOFTRESET_MASK (1 << 1)
165 #define SYSC_AUTOIDLE_MASK (1 << 0)
166
167 #define SYSC_IDLEMODE_SMART 0x2
168 #define SYSC_CLOCKACTIVITY_FCLK 0x2
169
170 /* Errata definitions */
171 #define I2C_OMAP_ERRATA_I207 (1 << 0)
172 #define I2C_OMAP3_1P153 (1 << 1)
173
174 struct omap_i2c_dev {
175 struct device *dev;
176 void __iomem *base; /* virtual */
177 int irq;
178 int reg_shift; /* bit shift for I2C register addresses */
179 struct completion cmd_complete;
180 struct resource *ioarea;
181 u32 latency; /* maximum mpu wkup latency */
182 void (*set_mpu_wkup_lat)(struct device *dev,
183 long latency);
184 u32 speed; /* Speed of bus in Khz */
185 u16 cmd_err;
186 u8 *buf;
187 u8 *regs;
188 size_t buf_len;
189 struct i2c_adapter adapter;
190 u8 fifo_size; /* use as flag and value
191 * fifo_size==0 implies no fifo
192 * if set, should be trsh+1
193 */
194 u8 rev;
195 unsigned b_hw:1; /* bad h/w fixes */
196 unsigned idle:1;
197 u16 iestate; /* Saved interrupt register */
198 u16 pscstate;
199 u16 scllstate;
200 u16 sclhstate;
201 u16 bufstate;
202 u16 syscstate;
203 u16 westate;
204 u16 errata;
205 };
206
207 const static u8 reg_map[] = {
208 [OMAP_I2C_REV_REG] = 0x00,
209 [OMAP_I2C_IE_REG] = 0x01,
210 [OMAP_I2C_STAT_REG] = 0x02,
211 [OMAP_I2C_IV_REG] = 0x03,
212 [OMAP_I2C_WE_REG] = 0x03,
213 [OMAP_I2C_SYSS_REG] = 0x04,
214 [OMAP_I2C_BUF_REG] = 0x05,
215 [OMAP_I2C_CNT_REG] = 0x06,
216 [OMAP_I2C_DATA_REG] = 0x07,
217 [OMAP_I2C_SYSC_REG] = 0x08,
218 [OMAP_I2C_CON_REG] = 0x09,
219 [OMAP_I2C_OA_REG] = 0x0a,
220 [OMAP_I2C_SA_REG] = 0x0b,
221 [OMAP_I2C_PSC_REG] = 0x0c,
222 [OMAP_I2C_SCLL_REG] = 0x0d,
223 [OMAP_I2C_SCLH_REG] = 0x0e,
224 [OMAP_I2C_SYSTEST_REG] = 0x0f,
225 [OMAP_I2C_BUFSTAT_REG] = 0x10,
226 };
227
228 const static u8 omap4_reg_map[] = {
229 [OMAP_I2C_REV_REG] = 0x04,
230 [OMAP_I2C_IE_REG] = 0x2c,
231 [OMAP_I2C_STAT_REG] = 0x28,
232 [OMAP_I2C_IV_REG] = 0x34,
233 [OMAP_I2C_WE_REG] = 0x34,
234 [OMAP_I2C_SYSS_REG] = 0x90,
235 [OMAP_I2C_BUF_REG] = 0x94,
236 [OMAP_I2C_CNT_REG] = 0x98,
237 [OMAP_I2C_DATA_REG] = 0x9c,
238 [OMAP_I2C_SYSC_REG] = 0x20,
239 [OMAP_I2C_CON_REG] = 0xa4,
240 [OMAP_I2C_OA_REG] = 0xa8,
241 [OMAP_I2C_SA_REG] = 0xac,
242 [OMAP_I2C_PSC_REG] = 0xb0,
243 [OMAP_I2C_SCLL_REG] = 0xb4,
244 [OMAP_I2C_SCLH_REG] = 0xb8,
245 [OMAP_I2C_SYSTEST_REG] = 0xbC,
246 [OMAP_I2C_BUFSTAT_REG] = 0xc0,
247 [OMAP_I2C_REVNB_LO] = 0x00,
248 [OMAP_I2C_REVNB_HI] = 0x04,
249 [OMAP_I2C_IRQSTATUS_RAW] = 0x24,
250 [OMAP_I2C_IRQENABLE_SET] = 0x2c,
251 [OMAP_I2C_IRQENABLE_CLR] = 0x30,
252 };
253
254 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
255 int reg, u16 val)
256 {
257 __raw_writew(val, i2c_dev->base +
258 (i2c_dev->regs[reg] << i2c_dev->reg_shift));
259 }
260
261 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
262 {
263 return __raw_readw(i2c_dev->base +
264 (i2c_dev->regs[reg] << i2c_dev->reg_shift));
265 }
266
267 static void omap_i2c_unidle(struct omap_i2c_dev *dev)
268 {
269 struct platform_device *pdev;
270 struct omap_i2c_bus_platform_data *pdata;
271
272 WARN_ON(!dev->idle);
273
274 pdev = to_platform_device(dev->dev);
275 pdata = pdev->dev.platform_data;
276
277 pm_runtime_get_sync(&pdev->dev);
278
279 if (cpu_is_omap34xx()) {
280 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
281 omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, dev->pscstate);
282 omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, dev->scllstate);
283 omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, dev->sclhstate);
284 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, dev->bufstate);
285 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, dev->syscstate);
286 omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
287 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
288 }
289 dev->idle = 0;
290
291 /*
292 * Don't write to this register if the IE state is 0 as it can
293 * cause deadlock.
294 */
295 if (dev->iestate)
296 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
297 }
298
299 static void omap_i2c_idle(struct omap_i2c_dev *dev)
300 {
301 struct platform_device *pdev;
302 struct omap_i2c_bus_platform_data *pdata;
303 u16 iv;
304
305 WARN_ON(dev->idle);
306
307 pdev = to_platform_device(dev->dev);
308 pdata = pdev->dev.platform_data;
309
310 dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
311 if (dev->rev >= OMAP_I2C_REV_ON_4430)
312 omap_i2c_write_reg(dev, OMAP_I2C_IRQENABLE_CLR, 1);
313 else
314 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0);
315
316 if (dev->rev < OMAP_I2C_REV_2) {
317 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */
318 } else {
319 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate);
320
321 /* Flush posted write before the dev->idle store occurs */
322 omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
323 }
324 dev->idle = 1;
325
326 pm_runtime_put_sync(&pdev->dev);
327 }
328
329 static int omap_i2c_init(struct omap_i2c_dev *dev)
330 {
331 u16 psc = 0, scll = 0, sclh = 0, buf = 0;
332 u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0;
333 unsigned long fclk_rate = 12000000;
334 unsigned long timeout;
335 unsigned long internal_clk = 0;
336 struct clk *fclk;
337
338 if (dev->rev >= OMAP_I2C_REV_2) {
339 /* Disable I2C controller before soft reset */
340 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
341 omap_i2c_read_reg(dev, OMAP_I2C_CON_REG) &
342 ~(OMAP_I2C_CON_EN));
343
344 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK);
345 /* For some reason we need to set the EN bit before the
346 * reset done bit gets set. */
347 timeout = jiffies + OMAP_I2C_TIMEOUT;
348 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
349 while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) &
350 SYSS_RESETDONE_MASK)) {
351 if (time_after(jiffies, timeout)) {
352 dev_warn(dev->dev, "timeout waiting "
353 "for controller reset\n");
354 return -ETIMEDOUT;
355 }
356 msleep(1);
357 }
358
359 /* SYSC register is cleared by the reset; rewrite it */
360 if (dev->rev == OMAP_I2C_REV_ON_2430) {
361
362 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
363 SYSC_AUTOIDLE_MASK);
364
365 } else if (dev->rev >= OMAP_I2C_REV_ON_3430) {
366 dev->syscstate = SYSC_AUTOIDLE_MASK;
367 dev->syscstate |= SYSC_ENAWAKEUP_MASK;
368 dev->syscstate |= (SYSC_IDLEMODE_SMART <<
369 __ffs(SYSC_SIDLEMODE_MASK));
370 dev->syscstate |= (SYSC_CLOCKACTIVITY_FCLK <<
371 __ffs(SYSC_CLOCKACTIVITY_MASK));
372
373 omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG,
374 dev->syscstate);
375 /*
376 * Enabling all wakup sources to stop I2C freezing on
377 * WFI instruction.
378 * REVISIT: Some wkup sources might not be needed.
379 */
380 dev->westate = OMAP_I2C_WE_ALL;
381 omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, dev->westate);
382 }
383 }
384 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
385
386 if (cpu_class_is_omap1()) {
387 /*
388 * The I2C functional clock is the armxor_ck, so there's
389 * no need to get "armxor_ck" separately. Now, if OMAP2420
390 * always returns 12MHz for the functional clock, we can
391 * do this bit unconditionally.
392 */
393 fclk = clk_get(dev->dev, "fck");
394 fclk_rate = clk_get_rate(fclk);
395 clk_put(fclk);
396
397 /* TRM for 5912 says the I2C clock must be prescaled to be
398 * between 7 - 12 MHz. The XOR input clock is typically
399 * 12, 13 or 19.2 MHz. So we should have code that produces:
400 *
401 * XOR MHz Divider Prescaler
402 * 12 1 0
403 * 13 2 1
404 * 19.2 2 1
405 */
406 if (fclk_rate > 12000000)
407 psc = fclk_rate / 12000000;
408 }
409
410 if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
411
412 /*
413 * HSI2C controller internal clk rate should be 19.2 Mhz for
414 * HS and for all modes on 2430. On 34xx we can use lower rate
415 * to get longer filter period for better noise suppression.
416 * The filter is iclk (fclk for HS) period.
417 */
418 if (dev->speed > 400 || cpu_is_omap2430())
419 internal_clk = 19200;
420 else if (dev->speed > 100)
421 internal_clk = 9600;
422 else
423 internal_clk = 4000;
424 fclk = clk_get(dev->dev, "fck");
425 fclk_rate = clk_get_rate(fclk) / 1000;
426 clk_put(fclk);
427
428 /* Compute prescaler divisor */
429 psc = fclk_rate / internal_clk;
430 psc = psc - 1;
431
432 /* If configured for High Speed */
433 if (dev->speed > 400) {
434 unsigned long scl;
435
436 /* For first phase of HS mode */
437 scl = internal_clk / 400;
438 fsscll = scl - (scl / 3) - 7;
439 fssclh = (scl / 3) - 5;
440
441 /* For second phase of HS mode */
442 scl = fclk_rate / dev->speed;
443 hsscll = scl - (scl / 3) - 7;
444 hssclh = (scl / 3) - 5;
445 } else if (dev->speed > 100) {
446 unsigned long scl;
447
448 /* Fast mode */
449 scl = internal_clk / dev->speed;
450 fsscll = scl - (scl / 3) - 7;
451 fssclh = (scl / 3) - 5;
452 } else {
453 /* Standard mode */
454 fsscll = internal_clk / (dev->speed * 2) - 7;
455 fssclh = internal_clk / (dev->speed * 2) - 5;
456 }
457 scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll;
458 sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh;
459 } else {
460 /* Program desired operating rate */
461 fclk_rate /= (psc + 1) * 1000;
462 if (psc > 2)
463 psc = 2;
464 scll = fclk_rate / (dev->speed * 2) - 7 + psc;
465 sclh = fclk_rate / (dev->speed * 2) - 7 + psc;
466 }
467
468 /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */
469 omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc);
470
471 /* SCL low and high time values */
472 omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll);
473 omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh);
474
475 if (dev->fifo_size) {
476 /* Note: setup required fifo size - 1. RTRSH and XTRSH */
477 buf = (dev->fifo_size - 1) << 8 | OMAP_I2C_BUF_RXFIF_CLR |
478 (dev->fifo_size - 1) | OMAP_I2C_BUF_TXFIF_CLR;
479 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, buf);
480 }
481
482 /* Take the I2C module out of reset: */
483 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN);
484
485 dev->errata = 0;
486
487 if (cpu_is_omap2430() || cpu_is_omap34xx())
488 dev->errata |= I2C_OMAP_ERRATA_I207;
489
490 /* Enable interrupts */
491 dev->iestate = (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY |
492 OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK |
493 OMAP_I2C_IE_AL) | ((dev->fifo_size) ?
494 (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0);
495 omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate);
496 if (cpu_is_omap34xx()) {
497 dev->pscstate = psc;
498 dev->scllstate = scll;
499 dev->sclhstate = sclh;
500 dev->bufstate = buf;
501 }
502 return 0;
503 }
504
505 /*
506 * Waiting on Bus Busy
507 */
508 static int omap_i2c_wait_for_bb(struct omap_i2c_dev *dev)
509 {
510 unsigned long timeout;
511
512 timeout = jiffies + OMAP_I2C_TIMEOUT;
513 while (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG) & OMAP_I2C_STAT_BB) {
514 if (time_after(jiffies, timeout)) {
515 dev_warn(dev->dev, "timeout waiting for bus ready\n");
516 return -ETIMEDOUT;
517 }
518 msleep(1);
519 }
520
521 return 0;
522 }
523
524 /*
525 * Low level master read/write transaction.
526 */
527 static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
528 struct i2c_msg *msg, int stop)
529 {
530 struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
531 int r;
532 u16 w;
533
534 dev_dbg(dev->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
535 msg->addr, msg->len, msg->flags, stop);
536
537 if (msg->len == 0)
538 return -EINVAL;
539
540 omap_i2c_write_reg(dev, OMAP_I2C_SA_REG, msg->addr);
541
542 /* REVISIT: Could the STB bit of I2C_CON be used with probing? */
543 dev->buf = msg->buf;
544 dev->buf_len = msg->len;
545
546 omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len);
547
548 /* Clear the FIFO Buffers */
549 w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG);
550 w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
551 omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
552
553 init_completion(&dev->cmd_complete);
554 dev->cmd_err = 0;
555
556 w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
557
558 /* High speed configuration */
559 if (dev->speed > 400)
560 w |= OMAP_I2C_CON_OPMODE_HS;
561
562 if (msg->flags & I2C_M_TEN)
563 w |= OMAP_I2C_CON_XA;
564 if (!(msg->flags & I2C_M_RD))
565 w |= OMAP_I2C_CON_TRX;
566
567 if (!dev->b_hw && stop)
568 w |= OMAP_I2C_CON_STP;
569
570 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
571
572 /*
573 * Don't write stt and stp together on some hardware.
574 */
575 if (dev->b_hw && stop) {
576 unsigned long delay = jiffies + OMAP_I2C_TIMEOUT;
577 u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
578 while (con & OMAP_I2C_CON_STT) {
579 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
580
581 /* Let the user know if i2c is in a bad state */
582 if (time_after(jiffies, delay)) {
583 dev_err(dev->dev, "controller timed out "
584 "waiting for start condition to finish\n");
585 return -ETIMEDOUT;
586 }
587 cpu_relax();
588 }
589
590 w |= OMAP_I2C_CON_STP;
591 w &= ~OMAP_I2C_CON_STT;
592 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
593 }
594
595 /*
596 * REVISIT: We should abort the transfer on signals, but the bus goes
597 * into arbitration and we're currently unable to recover from it.
598 */
599 r = wait_for_completion_timeout(&dev->cmd_complete,
600 OMAP_I2C_TIMEOUT);
601 dev->buf_len = 0;
602 if (r < 0)
603 return r;
604 if (r == 0) {
605 dev_err(dev->dev, "controller timed out\n");
606 omap_i2c_init(dev);
607 return -ETIMEDOUT;
608 }
609
610 if (likely(!dev->cmd_err))
611 return 0;
612
613 /* We have an error */
614 if (dev->cmd_err & (OMAP_I2C_STAT_AL | OMAP_I2C_STAT_ROVR |
615 OMAP_I2C_STAT_XUDF)) {
616 omap_i2c_init(dev);
617 return -EIO;
618 }
619
620 if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
621 if (msg->flags & I2C_M_IGNORE_NAK)
622 return 0;
623 if (stop) {
624 w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
625 w |= OMAP_I2C_CON_STP;
626 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
627 }
628 return -EREMOTEIO;
629 }
630 return -EIO;
631 }
632
633
634 /*
635 * Prepare controller for a transaction and call omap_i2c_xfer_msg
636 * to do the work during IRQ processing.
637 */
638 static int
639 omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
640 {
641 struct omap_i2c_dev *dev = i2c_get_adapdata(adap);
642 int i;
643 int r;
644
645 omap_i2c_unidle(dev);
646
647 r = omap_i2c_wait_for_bb(dev);
648 if (r < 0)
649 goto out;
650
651 if (dev->set_mpu_wkup_lat != NULL)
652 dev->set_mpu_wkup_lat(dev->dev, dev->latency);
653
654 for (i = 0; i < num; i++) {
655 r = omap_i2c_xfer_msg(adap, &msgs[i], (i == (num - 1)));
656 if (r != 0)
657 break;
658 }
659
660 if (dev->set_mpu_wkup_lat != NULL)
661 dev->set_mpu_wkup_lat(dev->dev, -1);
662
663 if (r == 0)
664 r = num;
665
666 omap_i2c_wait_for_bb(dev);
667 out:
668 omap_i2c_idle(dev);
669 return r;
670 }
671
672 static u32
673 omap_i2c_func(struct i2c_adapter *adap)
674 {
675 return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
676 }
677
678 static inline void
679 omap_i2c_complete_cmd(struct omap_i2c_dev *dev, u16 err)
680 {
681 dev->cmd_err |= err;
682 complete(&dev->cmd_complete);
683 }
684
685 static inline void
686 omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat)
687 {
688 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
689 }
690
691 static inline void i2c_omap_errata_i207(struct omap_i2c_dev *dev, u16 stat)
692 {
693 /*
694 * I2C Errata(Errata Nos. OMAP2: 1.67, OMAP3: 1.8)
695 * Not applicable for OMAP4.
696 * Under certain rare conditions, RDR could be set again
697 * when the bus is busy, then ignore the interrupt and
698 * clear the interrupt.
699 */
700 if (stat & OMAP_I2C_STAT_RDR) {
701 /* Step 1: If RDR is set, clear it */
702 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
703
704 /* Step 2: */
705 if (!(omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
706 & OMAP_I2C_STAT_BB)) {
707
708 /* Step 3: */
709 if (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG)
710 & OMAP_I2C_STAT_RDR) {
711 omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
712 dev_dbg(dev->dev, "RDR when bus is busy.\n");
713 }
714
715 }
716 }
717 }
718
719 /* rev1 devices are apparently only on some 15xx */
720 #ifdef CONFIG_ARCH_OMAP15XX
721
722 static irqreturn_t
723 omap_i2c_rev1_isr(int this_irq, void *dev_id)
724 {
725 struct omap_i2c_dev *dev = dev_id;
726 u16 iv, w;
727
728 if (dev->idle)
729 return IRQ_NONE;
730
731 iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG);
732 switch (iv) {
733 case 0x00: /* None */
734 break;
735 case 0x01: /* Arbitration lost */
736 dev_err(dev->dev, "Arbitration lost\n");
737 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL);
738 break;
739 case 0x02: /* No acknowledgement */
740 omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK);
741 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_STP);
742 break;
743 case 0x03: /* Register access ready */
744 omap_i2c_complete_cmd(dev, 0);
745 break;
746 case 0x04: /* Receive data ready */
747 if (dev->buf_len) {
748 w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
749 *dev->buf++ = w;
750 dev->buf_len--;
751 if (dev->buf_len) {
752 *dev->buf++ = w >> 8;
753 dev->buf_len--;
754 }
755 } else
756 dev_err(dev->dev, "RRDY IRQ while no data requested\n");
757 break;
758 case 0x05: /* Transmit data ready */
759 if (dev->buf_len) {
760 w = *dev->buf++;
761 dev->buf_len--;
762 if (dev->buf_len) {
763 w |= *dev->buf++ << 8;
764 dev->buf_len--;
765 }
766 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
767 } else
768 dev_err(dev->dev, "XRDY IRQ while no data to send\n");
769 break;
770 default:
771 return IRQ_NONE;
772 }
773
774 return IRQ_HANDLED;
775 }
776 #else
777 #define omap_i2c_rev1_isr NULL
778 #endif
779
780 /*
781 * OMAP3430 Errata 1.153: When an XRDY/XDR is hit, wait for XUDF before writing
782 * data to DATA_REG. Otherwise some data bytes can be lost while transferring
783 * them from the memory to the I2C interface.
784 */
785 static int errata_omap3_1p153(struct omap_i2c_dev *dev, u16 *stat, int *err)
786 {
787 unsigned long timeout = 10000;
788
789 while (--timeout && !(*stat & OMAP_I2C_STAT_XUDF)) {
790 if (*stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
791 omap_i2c_ack_stat(dev, *stat & (OMAP_I2C_STAT_XRDY |
792 OMAP_I2C_STAT_XDR));
793 *err |= OMAP_I2C_STAT_XUDF;
794 return -ETIMEDOUT;
795 }
796
797 cpu_relax();
798 *stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
799 }
800
801 if (!timeout) {
802 dev_err(dev->dev, "timeout waiting on XUDF bit\n");
803 return 0;
804 }
805
806 return 0;
807 }
808
809 static irqreturn_t
810 omap_i2c_isr(int this_irq, void *dev_id)
811 {
812 struct omap_i2c_dev *dev = dev_id;
813 u16 bits;
814 u16 stat, w;
815 int err, count = 0;
816
817 if (dev->idle)
818 return IRQ_NONE;
819
820 bits = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG);
821 while ((stat = (omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG))) & bits) {
822 dev_dbg(dev->dev, "IRQ (ISR = 0x%04x)\n", stat);
823 if (count++ == 100) {
824 dev_warn(dev->dev, "Too much work in one IRQ\n");
825 break;
826 }
827
828 err = 0;
829 complete:
830 /*
831 * Ack the stat in one go, but [R/X]DR and [R/X]RDY should be
832 * acked after the data operation is complete.
833 * Ref: TRM SWPU114Q Figure 18-31
834 */
835 omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat &
836 ~(OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
837 OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
838
839 if (stat & OMAP_I2C_STAT_NACK) {
840 err |= OMAP_I2C_STAT_NACK;
841 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
842 OMAP_I2C_CON_STP);
843 }
844 if (stat & OMAP_I2C_STAT_AL) {
845 dev_err(dev->dev, "Arbitration lost\n");
846 err |= OMAP_I2C_STAT_AL;
847 }
848 /*
849 * ProDB0017052: Clear ARDY bit twice
850 */
851 if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
852 OMAP_I2C_STAT_AL)) {
853 omap_i2c_ack_stat(dev, stat &
854 (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR |
855 OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR |
856 OMAP_I2C_STAT_ARDY));
857 omap_i2c_complete_cmd(dev, err);
858 return IRQ_HANDLED;
859 }
860 if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
861 u8 num_bytes = 1;
862
863 if (dev->errata & I2C_OMAP_ERRATA_I207)
864 i2c_omap_errata_i207(dev, stat);
865
866 if (dev->fifo_size) {
867 if (stat & OMAP_I2C_STAT_RRDY)
868 num_bytes = dev->fifo_size;
869 else /* read RXSTAT on RDR interrupt */
870 num_bytes = (omap_i2c_read_reg(dev,
871 OMAP_I2C_BUFSTAT_REG)
872 >> 8) & 0x3F;
873 }
874 while (num_bytes) {
875 num_bytes--;
876 w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG);
877 if (dev->buf_len) {
878 *dev->buf++ = w;
879 dev->buf_len--;
880 /*
881 * Data reg in 2430, omap3 and
882 * omap4 is 8 bit wide
883 */
884 if (cpu_class_is_omap1() ||
885 cpu_is_omap2420()) {
886 if (dev->buf_len) {
887 *dev->buf++ = w >> 8;
888 dev->buf_len--;
889 }
890 }
891 } else {
892 if (stat & OMAP_I2C_STAT_RRDY)
893 dev_err(dev->dev,
894 "RRDY IRQ while no data"
895 " requested\n");
896 if (stat & OMAP_I2C_STAT_RDR)
897 dev_err(dev->dev,
898 "RDR IRQ while no data"
899 " requested\n");
900 break;
901 }
902 }
903 omap_i2c_ack_stat(dev,
904 stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR));
905 continue;
906 }
907 if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) {
908 u8 num_bytes = 1;
909 if (dev->fifo_size) {
910 if (stat & OMAP_I2C_STAT_XRDY)
911 num_bytes = dev->fifo_size;
912 else /* read TXSTAT on XDR interrupt */
913 num_bytes = omap_i2c_read_reg(dev,
914 OMAP_I2C_BUFSTAT_REG)
915 & 0x3F;
916 }
917 while (num_bytes) {
918 num_bytes--;
919 w = 0;
920 if (dev->buf_len) {
921 w = *dev->buf++;
922 dev->buf_len--;
923 /*
924 * Data reg in 2430, omap3 and
925 * omap4 is 8 bit wide
926 */
927 if (cpu_class_is_omap1() ||
928 cpu_is_omap2420()) {
929 if (dev->buf_len) {
930 w |= *dev->buf++ << 8;
931 dev->buf_len--;
932 }
933 }
934 } else {
935 if (stat & OMAP_I2C_STAT_XRDY)
936 dev_err(dev->dev,
937 "XRDY IRQ while no "
938 "data to send\n");
939 if (stat & OMAP_I2C_STAT_XDR)
940 dev_err(dev->dev,
941 "XDR IRQ while no "
942 "data to send\n");
943 break;
944 }
945
946 if ((dev->errata & I2C_OMAP3_1P153) &&
947 errata_omap3_1p153(dev, &stat, &err))
948 goto complete;
949
950 omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
951 }
952 omap_i2c_ack_stat(dev,
953 stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
954 continue;
955 }
956 if (stat & OMAP_I2C_STAT_ROVR) {
957 dev_err(dev->dev, "Receive overrun\n");
958 dev->cmd_err |= OMAP_I2C_STAT_ROVR;
959 }
960 if (stat & OMAP_I2C_STAT_XUDF) {
961 dev_err(dev->dev, "Transmit underflow\n");
962 dev->cmd_err |= OMAP_I2C_STAT_XUDF;
963 }
964 }
965
966 return count ? IRQ_HANDLED : IRQ_NONE;
967 }
968
969 static const struct i2c_algorithm omap_i2c_algo = {
970 .master_xfer = omap_i2c_xfer,
971 .functionality = omap_i2c_func,
972 };
973
974 static int __devinit
975 omap_i2c_probe(struct platform_device *pdev)
976 {
977 struct omap_i2c_dev *dev;
978 struct i2c_adapter *adap;
979 struct resource *mem, *irq, *ioarea;
980 struct omap_i2c_bus_platform_data *pdata = pdev->dev.platform_data;
981 irq_handler_t isr;
982 int r;
983 u32 speed = 0;
984
985 /* NOTE: driver uses the static register mapping */
986 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
987 if (!mem) {
988 dev_err(&pdev->dev, "no mem resource?\n");
989 return -ENODEV;
990 }
991 irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
992 if (!irq) {
993 dev_err(&pdev->dev, "no irq resource?\n");
994 return -ENODEV;
995 }
996
997 ioarea = request_mem_region(mem->start, resource_size(mem),
998 pdev->name);
999 if (!ioarea) {
1000 dev_err(&pdev->dev, "I2C region already claimed\n");
1001 return -EBUSY;
1002 }
1003
1004 dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL);
1005 if (!dev) {
1006 r = -ENOMEM;
1007 goto err_release_region;
1008 }
1009
1010 if (pdata != NULL) {
1011 speed = pdata->clkrate;
1012 dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
1013 } else {
1014 speed = 100; /* Default speed */
1015 dev->set_mpu_wkup_lat = NULL;
1016 }
1017
1018 dev->speed = speed;
1019 dev->idle = 1;
1020 dev->dev = &pdev->dev;
1021 dev->irq = irq->start;
1022 dev->base = ioremap(mem->start, resource_size(mem));
1023 if (!dev->base) {
1024 r = -ENOMEM;
1025 goto err_free_mem;
1026 }
1027
1028 platform_set_drvdata(pdev, dev);
1029
1030 if (cpu_is_omap7xx())
1031 dev->reg_shift = 1;
1032 else if (cpu_is_omap44xx())
1033 dev->reg_shift = 0;
1034 else
1035 dev->reg_shift = 2;
1036
1037 if (cpu_is_omap44xx())
1038 dev->regs = (u8 *) omap4_reg_map;
1039 else
1040 dev->regs = (u8 *) reg_map;
1041
1042 pm_runtime_enable(&pdev->dev);
1043 omap_i2c_unidle(dev);
1044
1045 dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff;
1046
1047 if (dev->rev <= OMAP_I2C_REV_ON_3430)
1048 dev->errata |= I2C_OMAP3_1P153;
1049
1050 if (!(cpu_class_is_omap1() || cpu_is_omap2420())) {
1051 u16 s;
1052
1053 /* Set up the fifo size - Get total size */
1054 s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3;
1055 dev->fifo_size = 0x8 << s;
1056
1057 /*
1058 * Set up notification threshold as half the total available
1059 * size. This is to ensure that we can handle the status on int
1060 * call back latencies.
1061 */
1062 if (dev->rev >= OMAP_I2C_REV_ON_4430) {
1063 dev->fifo_size = 0;
1064 dev->b_hw = 0; /* Disable hardware fixes */
1065 } else {
1066 dev->fifo_size = (dev->fifo_size / 2);
1067 dev->b_hw = 1; /* Enable hardware fixes */
1068 }
1069 /* calculate wakeup latency constraint for MPU */
1070 if (dev->set_mpu_wkup_lat != NULL)
1071 dev->latency = (1000000 * dev->fifo_size) /
1072 (1000 * speed / 8);
1073 }
1074
1075 /* reset ASAP, clearing any IRQs */
1076 omap_i2c_init(dev);
1077
1078 isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr;
1079 r = request_irq(dev->irq, isr, 0, pdev->name, dev);
1080
1081 if (r) {
1082 dev_err(dev->dev, "failure requesting irq %i\n", dev->irq);
1083 goto err_unuse_clocks;
1084 }
1085
1086 dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n",
1087 pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed);
1088
1089 omap_i2c_idle(dev);
1090
1091 adap = &dev->adapter;
1092 i2c_set_adapdata(adap, dev);
1093 adap->owner = THIS_MODULE;
1094 adap->class = I2C_CLASS_HWMON;
1095 strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
1096 adap->algo = &omap_i2c_algo;
1097 adap->dev.parent = &pdev->dev;
1098
1099 /* i2c device drivers may be active on return from add_adapter() */
1100 adap->nr = pdev->id;
1101 r = i2c_add_numbered_adapter(adap);
1102 if (r) {
1103 dev_err(dev->dev, "failure adding adapter\n");
1104 goto err_free_irq;
1105 }
1106
1107 return 0;
1108
1109 err_free_irq:
1110 free_irq(dev->irq, dev);
1111 err_unuse_clocks:
1112 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
1113 omap_i2c_idle(dev);
1114 iounmap(dev->base);
1115 err_free_mem:
1116 platform_set_drvdata(pdev, NULL);
1117 kfree(dev);
1118 err_release_region:
1119 release_mem_region(mem->start, resource_size(mem));
1120
1121 return r;
1122 }
1123
1124 static int
1125 omap_i2c_remove(struct platform_device *pdev)
1126 {
1127 struct omap_i2c_dev *dev = platform_get_drvdata(pdev);
1128 struct resource *mem;
1129
1130 platform_set_drvdata(pdev, NULL);
1131
1132 free_irq(dev->irq, dev);
1133 i2c_del_adapter(&dev->adapter);
1134 omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0);
1135 iounmap(dev->base);
1136 kfree(dev);
1137 mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1138 release_mem_region(mem->start, resource_size(mem));
1139 return 0;
1140 }
1141
1142 #ifdef CONFIG_SUSPEND
1143 static int omap_i2c_suspend(struct device *dev)
1144 {
1145 if (!pm_runtime_suspended(dev))
1146 if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
1147 dev->bus->pm->runtime_suspend(dev);
1148
1149 return 0;
1150 }
1151
1152 static int omap_i2c_resume(struct device *dev)
1153 {
1154 if (!pm_runtime_suspended(dev))
1155 if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
1156 dev->bus->pm->runtime_resume(dev);
1157
1158 return 0;
1159 }
1160
1161 static struct dev_pm_ops omap_i2c_pm_ops = {
1162 .suspend = omap_i2c_suspend,
1163 .resume = omap_i2c_resume,
1164 };
1165 #define OMAP_I2C_PM_OPS (&omap_i2c_pm_ops)
1166 #else
1167 #define OMAP_I2C_PM_OPS NULL
1168 #endif
1169
1170 static struct platform_driver omap_i2c_driver = {
1171 .probe = omap_i2c_probe,
1172 .remove = omap_i2c_remove,
1173 .driver = {
1174 .name = "omap_i2c",
1175 .owner = THIS_MODULE,
1176 .pm = OMAP_I2C_PM_OPS,
1177 },
1178 };
1179
1180 /* I2C may be needed to bring up other drivers */
1181 static int __init
1182 omap_i2c_init_driver(void)
1183 {
1184 return platform_driver_register(&omap_i2c_driver);
1185 }
1186 subsys_initcall(omap_i2c_init_driver);
1187
1188 static void __exit omap_i2c_exit_driver(void)
1189 {
1190 platform_driver_unregister(&omap_i2c_driver);
1191 }
1192 module_exit(omap_i2c_exit_driver);
1193
1194 MODULE_AUTHOR("MontaVista Software, Inc. (and others)");
1195 MODULE_DESCRIPTION("TI OMAP I2C bus adapter");
1196 MODULE_LICENSE("GPL");
1197 MODULE_ALIAS("platform:omap_i2c");