arch/arm/mach-bcmring/csp/chipc/chipcHw.c

   1 /*****************************************************************************
   2 * Copyright 2003 - 2008 Broadcom Corporation.  All rights reserved.
   3 *
   4 * Unless you and Broadcom execute a separate written software license
   5 * agreement governing use of this software, this software is licensed to you
   6 * under the terms of the GNU General Public License version 2, available at
   7 * http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
   8 *
   9 * Notwithstanding the above, under no circumstances may you combine this
  10 * software in any way with any other Broadcom software provided under a
  11 * license other than the GPL, without Broadcom's express prior written
  12 * consent.
  13 *****************************************************************************/
  14
  15 /****************************************************************************/
  16 /**
  17 *  @file    chipcHw.c
  18 *
  19 *  @brief   Low level Various CHIP clock controlling routines
  20 *
  21 *  @note
  22 *
  23 *   These routines provide basic clock controlling functionality only.
  24 */
  25 /****************************************************************************/
  26
  27 /* ---- Include Files ---------------------------------------------------- */
  28
  29 #include <csp/errno.h>
  30 #include <csp/stdint.h>
  31 #include <csp/module.h>
  32
  33 #include <mach/csp/chipcHw_def.h>
  34 #include <mach/csp/chipcHw_inline.h>
  35
  36 #include <csp/reg.h>
  37 #include <csp/delay.h>
  38
  39 /* ---- Private Constants and Types --------------------------------------- */
  40
  41 /* VPM alignment algorithm uses this */
  42 #define MAX_PHASE_ADJUST_COUNT         0xFFFF   /* Max number of times allowed to adjust the phase */
  43 #define MAX_PHASE_ALIGN_ATTEMPTS       10       /* Max number of attempt to align the phase */
  44
  45 /* Local definition of clock type */
  46 #define PLL_CLOCK                      1        /* PLL Clock */
  47 #define NON_PLL_CLOCK                  2        /* Divider clock */
  48
  49 static int chipcHw_divide(int num, int denom)
  50     __attribute__ ((section(".aramtext")));
  51
  52 /****************************************************************************/
  53 /**
  54 *  @brief   Set clock fequency for miscellaneous configurable clocks
  55 *
  56 *  This function sets clock frequency
  57 *
  58 *  @return  Configured clock frequency in hertz
  59 *
  60 */
  61 /****************************************************************************/
  62 chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock    /*  [ IN ] Configurable clock */
  63     ) {
  64         volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
  65         volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
  66         volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
  67         uint32_t vcoFreqPll1Hz = 0;     /* Effective VCO frequency for PLL1 in Hz */
  68         uint32_t vcoFreqPll2Hz = 0;     /* Effective VCO frequency for PLL2 in Hz */
  69         uint32_t dependentClockType = 0;
  70         uint32_t vcoHz = 0;
  71
  72         /* Get VCO frequencies */
  73         if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
  74                 uint64_t adjustFreq = 0;
  75
  76                 vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
  77                     chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
  78                     ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
  79                      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
  80
  81                 /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
  82                 adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
  83                         (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
  84                         chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
  85                 vcoFreqPll1Hz += (uint32_t) adjustFreq;
  86         } else {
  87                 vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
  88                     chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
  89                     ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
  90                      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
  91         }
  92         vcoFreqPll2Hz =
  93             chipcHw_XTAL_FREQ_Hz *
  94                  chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
  95             ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
  96              chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
  97
  98         switch (clock) {
  99         case chipcHw_CLOCK_DDR:
 100                 pPLLReg = &pChipcHw->DDRClock;
 101                 vcoHz = vcoFreqPll1Hz;
 102                 break;
 103         case chipcHw_CLOCK_ARM:
 104                 pPLLReg = &pChipcHw->ARMClock;
 105                 vcoHz = vcoFreqPll1Hz;
 106                 break;
 107         case chipcHw_CLOCK_ESW:
 108                 pPLLReg = &pChipcHw->ESWClock;
 109                 vcoHz = vcoFreqPll1Hz;
 110                 break;
 111         case chipcHw_CLOCK_VPM:
 112                 pPLLReg = &pChipcHw->VPMClock;
 113                 vcoHz = vcoFreqPll1Hz;
 114                 break;
 115         case chipcHw_CLOCK_ESW125:
 116                 pPLLReg = &pChipcHw->ESW125Clock;
 117                 vcoHz = vcoFreqPll1Hz;
 118                 break;
 119         case chipcHw_CLOCK_UART:
 120                 pPLLReg = &pChipcHw->UARTClock;
 121                 vcoHz = vcoFreqPll1Hz;
 122                 break;
 123         case chipcHw_CLOCK_SDIO0:
 124                 pPLLReg = &pChipcHw->SDIO0Clock;
 125                 vcoHz = vcoFreqPll1Hz;
 126                 break;
 127         case chipcHw_CLOCK_SDIO1:
 128                 pPLLReg = &pChipcHw->SDIO1Clock;
 129                 vcoHz = vcoFreqPll1Hz;
 130                 break;
 131         case chipcHw_CLOCK_SPI:
 132                 pPLLReg = &pChipcHw->SPIClock;
 133                 vcoHz = vcoFreqPll1Hz;
 134                 break;
 135         case chipcHw_CLOCK_ETM:
 136                 pPLLReg = &pChipcHw->ETMClock;
 137                 vcoHz = vcoFreqPll1Hz;
 138                 break;
 139         case chipcHw_CLOCK_USB:
 140                 pPLLReg = &pChipcHw->USBClock;
 141                 vcoHz = vcoFreqPll2Hz;
 142                 break;
 143         case chipcHw_CLOCK_LCD:
 144                 pPLLReg = &pChipcHw->LCDClock;
 145                 vcoHz = vcoFreqPll2Hz;
 146                 break;
 147         case chipcHw_CLOCK_APM:
 148                 pPLLReg = &pChipcHw->APMClock;
 149                 vcoHz = vcoFreqPll2Hz;
 150                 break;
 151         case chipcHw_CLOCK_BUS:
 152                 pClockCtrl = &pChipcHw->ACLKClock;
 153                 pDependentClock = &pChipcHw->ARMClock;
 154                 vcoHz = vcoFreqPll1Hz;
 155                 dependentClockType = PLL_CLOCK;
 156                 break;
 157         case chipcHw_CLOCK_OTP:
 158                 pClockCtrl = &pChipcHw->OTPClock;
 159                 break;
 160         case chipcHw_CLOCK_I2C:
 161                 pClockCtrl = &pChipcHw->I2CClock;
 162                 break;
 163         case chipcHw_CLOCK_I2S0:
 164                 pClockCtrl = &pChipcHw->I2S0Clock;
 165                 break;
 166         case chipcHw_CLOCK_RTBUS:
 167                 pClockCtrl = &pChipcHw->RTBUSClock;
 168                 pDependentClock = &pChipcHw->ACLKClock;
 169                 dependentClockType = NON_PLL_CLOCK;
 170                 break;
 171         case chipcHw_CLOCK_APM100:
 172                 pClockCtrl = &pChipcHw->APM100Clock;
 173                 pDependentClock = &pChipcHw->APMClock;
 174                 vcoHz = vcoFreqPll2Hz;
 175                 dependentClockType = PLL_CLOCK;
 176                 break;
 177         case chipcHw_CLOCK_TSC:
 178                 pClockCtrl = &pChipcHw->TSCClock;
 179                 break;
 180         case chipcHw_CLOCK_LED:
 181                 pClockCtrl = &pChipcHw->LEDClock;
 182                 break;
 183         case chipcHw_CLOCK_I2S1:
 184                 pClockCtrl = &pChipcHw->I2S1Clock;
 185                 break;
 186         }
 187
 188         if (pPLLReg) {
 189                 /* Obtain PLL clock frequency */
 190                 if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
 191                         /* Return crystal clock frequency when bypassed */
 192                         return chipcHw_XTAL_FREQ_Hz;
 193                 } else if (clock == chipcHw_CLOCK_DDR) {
 194                         /* DDR frequency is configured in PLLDivider register */
 195                         return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
 196                 } else {
 197                         /* From chip revision number B0, LCD clock is internally divided by 2 */
 198                         if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
 199                                 vcoHz >>= 1;
 200                         }
 201                         /* Obtain PLL clock frequency using VCO dividers */
 202                         return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
 203                 }
 204         } else if (pClockCtrl) {
 205                 /* Obtain divider clock frequency */
 206                 uint32_t div;
 207                 uint32_t freq = 0;
 208
 209                 if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
 210                         /* Return crystal clock frequency when bypassed */
 211                         return chipcHw_XTAL_FREQ_Hz;
 212                 } else if (pDependentClock) {
 213                         /* Identify the dependent clock frequency */
 214                         switch (dependentClockType) {
 215                         case PLL_CLOCK:
 216                                 if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) {
 217                                         /* Use crystal clock frequency when dependent PLL clock is bypassed */
 218                                         freq = chipcHw_XTAL_FREQ_Hz;
 219                                 } else {
 220                                         /* Obtain PLL clock frequency using VCO dividers */
 221                                         div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK;
 222                                         freq = div ? chipcHw_divide(vcoHz, div) : 0;
 223                                 }
 224                                 break;
 225                         case NON_PLL_CLOCK:
 226                                 if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
 227                                         freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
 228                                 } else {
 229                                         if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) {
 230                                                 /* Use crystal clock frequency when dependent divider clock is bypassed */
 231                                                 freq = chipcHw_XTAL_FREQ_Hz;
 232                                         } else {
 233                                                 /* Obtain divider clock frequency using XTAL dividers */
 234                                                 div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
 235                                                 freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256));
 236                                         }
 237                                 }
 238                                 break;
 239                         }
 240                 } else {
 241                         /* Dependent on crystal clock */
 242                         freq = chipcHw_XTAL_FREQ_Hz;
 243                 }
 244
 245                 div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK;
 246                 return chipcHw_divide(freq, (div ? div : 256));
 247         }
 248         return 0;
 249 }
 250
 251 /****************************************************************************/
 252 /**
 253 *  @brief   Set clock fequency for miscellaneous configurable clocks
 254 *
 255 *  This function sets clock frequency
 256 *
 257 *  @return  Configured clock frequency in Hz
 258 *
 259 */
 260 /****************************************************************************/
 261 chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock,   /*  [ IN ] Configurable clock */
 262                                        uint32_t freq    /*  [ IN ] Clock frequency in Hz */
 263     ) {
 264         volatile uint32_t *pPLLReg = (uint32_t *) 0x0;
 265         volatile uint32_t *pClockCtrl = (uint32_t *) 0x0;
 266         volatile uint32_t *pDependentClock = (uint32_t *) 0x0;
 267         uint32_t vcoFreqPll1Hz = 0;     /* Effective VCO frequency for PLL1 in Hz */
 268         uint32_t desVcoFreqPll1Hz = 0;  /* Desired VCO frequency for PLL1 in Hz */
 269         uint32_t vcoFreqPll2Hz = 0;     /* Effective VCO frequency for PLL2 in Hz */
 270         uint32_t dependentClockType = 0;
 271         uint32_t vcoHz = 0;
 272         uint32_t desVcoHz = 0;
 273
 274         /* Get VCO frequencies */
 275         if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) {
 276                 uint64_t adjustFreq = 0;
 277
 278                 vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
 279                     chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
 280                     ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
 281                      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
 282
 283                 /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */
 284                 adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz *
 285                         (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS *
 286                         chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC));
 287                 vcoFreqPll1Hz += (uint32_t) adjustFreq;
 288
 289                 /* Desired VCO frequency */
 290                 desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
 291                     chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
 292                     (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
 293                       chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1);
 294         } else {
 295                 vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz *
 296                     chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
 297                     ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
 298                      chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
 299         }
 300         vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) *
 301             ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >>
 302              chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT);
 303
 304         switch (clock) {
 305         case chipcHw_CLOCK_DDR:
 306                 /* Configure the DDR_ctrl:BUS ratio settings */
 307                 {
 308                         REG_LOCAL_IRQ_SAVE;
 309                         /* Dvide DDR_phy by two to obtain DDR_ctrl clock */
 310                         pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
 311                                 << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
 312                         REG_LOCAL_IRQ_RESTORE;
 313                 }
 314                 pPLLReg = &pChipcHw->DDRClock;
 315                 vcoHz = vcoFreqPll1Hz;
 316                 desVcoHz = desVcoFreqPll1Hz;
 317                 break;
 318         case chipcHw_CLOCK_ARM:
 319                 pPLLReg = &pChipcHw->ARMClock;
 320                 vcoHz = vcoFreqPll1Hz;
 321                 desVcoHz = desVcoFreqPll1Hz;
 322                 break;
 323         case chipcHw_CLOCK_ESW:
 324                 pPLLReg = &pChipcHw->ESWClock;
 325                 vcoHz = vcoFreqPll1Hz;
 326                 desVcoHz = desVcoFreqPll1Hz;
 327                 break;
 328         case chipcHw_CLOCK_VPM:
 329                 /* Configure the VPM:BUS ratio settings */
 330                 {
 331                         REG_LOCAL_IRQ_SAVE;
 332                         pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1)
 333                                 << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT);
 334                         REG_LOCAL_IRQ_RESTORE;
 335                 }
 336                 pPLLReg = &pChipcHw->VPMClock;
 337                 vcoHz = vcoFreqPll1Hz;
 338                 desVcoHz = desVcoFreqPll1Hz;
 339                 break;
 340         case chipcHw_CLOCK_ESW125:
 341                 pPLLReg = &pChipcHw->ESW125Clock;
 342                 vcoHz = vcoFreqPll1Hz;
 343                 desVcoHz = desVcoFreqPll1Hz;
 344                 break;
 345         case chipcHw_CLOCK_UART:
 346                 pPLLReg = &pChipcHw->UARTClock;
 347                 vcoHz = vcoFreqPll1Hz;
 348                 desVcoHz = desVcoFreqPll1Hz;
 349                 break;
 350         case chipcHw_CLOCK_SDIO0:
 351                 pPLLReg = &pChipcHw->SDIO0Clock;
 352                 vcoHz = vcoFreqPll1Hz;
 353                 desVcoHz = desVcoFreqPll1Hz;
 354                 break;
 355         case chipcHw_CLOCK_SDIO1:
 356                 pPLLReg = &pChipcHw->SDIO1Clock;
 357                 vcoHz = vcoFreqPll1Hz;
 358                 desVcoHz = desVcoFreqPll1Hz;
 359                 break;
 360         case chipcHw_CLOCK_SPI:
 361                 pPLLReg = &pChipcHw->SPIClock;
 362                 vcoHz = vcoFreqPll1Hz;
 363                 desVcoHz = desVcoFreqPll1Hz;
 364                 break;
 365         case chipcHw_CLOCK_ETM:
 366                 pPLLReg = &pChipcHw->ETMClock;
 367                 vcoHz = vcoFreqPll1Hz;
 368                 desVcoHz = desVcoFreqPll1Hz;
 369                 break;
 370         case chipcHw_CLOCK_USB:
 371                 pPLLReg = &pChipcHw->USBClock;
 372                 vcoHz = vcoFreqPll2Hz;
 373                 desVcoHz = vcoFreqPll2Hz;
 374                 break;
 375         case chipcHw_CLOCK_LCD:
 376                 pPLLReg = &pChipcHw->LCDClock;
 377                 vcoHz = vcoFreqPll2Hz;
 378                 desVcoHz = vcoFreqPll2Hz;
 379                 break;
 380         case chipcHw_CLOCK_APM:
 381                 pPLLReg = &pChipcHw->APMClock;
 382                 vcoHz = vcoFreqPll2Hz;
 383                 desVcoHz = vcoFreqPll2Hz;
 384                 break;
 385         case chipcHw_CLOCK_BUS:
 386                 pClockCtrl = &pChipcHw->ACLKClock;
 387                 pDependentClock = &pChipcHw->ARMClock;
 388                 vcoHz = vcoFreqPll1Hz;
 389                 desVcoHz = desVcoFreqPll1Hz;
 390                 dependentClockType = PLL_CLOCK;
 391                 break;
 392         case chipcHw_CLOCK_OTP:
 393                 pClockCtrl = &pChipcHw->OTPClock;
 394                 break;
 395         case chipcHw_CLOCK_I2C:
 396                 pClockCtrl = &pChipcHw->I2CClock;
 397                 break;
 398         case chipcHw_CLOCK_I2S0:
 399                 pClockCtrl = &pChipcHw->I2S0Clock;
 400                 break;
 401         case chipcHw_CLOCK_RTBUS:
 402                 pClockCtrl = &pChipcHw->RTBUSClock;
 403                 pDependentClock = &pChipcHw->ACLKClock;
 404                 dependentClockType = NON_PLL_CLOCK;
 405                 break;
 406         case chipcHw_CLOCK_APM100:
 407                 pClockCtrl = &pChipcHw->APM100Clock;
 408                 pDependentClock = &pChipcHw->APMClock;
 409                 vcoHz = vcoFreqPll2Hz;
 410                 desVcoHz = vcoFreqPll2Hz;
 411                 dependentClockType = PLL_CLOCK;
 412                 break;
 413         case chipcHw_CLOCK_TSC:
 414                 pClockCtrl = &pChipcHw->TSCClock;
 415                 break;
 416         case chipcHw_CLOCK_LED:
 417                 pClockCtrl = &pChipcHw->LEDClock;
 418                 break;
 419         case chipcHw_CLOCK_I2S1:
 420                 pClockCtrl = &pChipcHw->I2S1Clock;
 421                 break;
 422         }
 423
 424         if (pPLLReg) {
 425                 /* Select XTAL as bypass source */
 426                 reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO);
 427                 reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
 428                 /* For DDR settings use only the PLL divider clock */
 429                 if (pPLLReg == &pChipcHw->DDRClock) {
 430                         /* Set M1DIV for PLL1, which controls the DDR clock */
 431                         reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24));
 432                         /* Calculate expected frequency */
 433                         freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256));
 434                 } else {
 435                         /* From chip revision number B0, LCD clock is internally divided by 2 */
 436                         if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) {
 437                                 desVcoHz >>= 1;
 438                                 vcoHz >>= 1;
 439                         }
 440                         /* Set MDIV to change the frequency */
 441                         reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK));
 442                         reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq));
 443                         /* Calculate expected frequency */
 444                         freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256));
 445                 }
 446                 /* Wait for for atleast 200ns as per the protocol to change frequency */
 447                 udelay(1);
 448                 /* Do not bypass */
 449                 reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT);
 450                 /* Return the configured frequency */
 451                 return freq;
 452         } else if (pClockCtrl) {
 453                 uint32_t divider = 0;
 454
 455                 /* Divider clock should not be bypassed  */
 456                 reg32_modify_and(pClockCtrl,
 457                                  ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT);
 458
 459                 /* Identify the clock source */
 460                 if (pDependentClock) {
 461                         switch (dependentClockType) {
 462                         case PLL_CLOCK:
 463                                 divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq);
 464                                 break;
 465                         case NON_PLL_CLOCK:
 466                                 {
 467                                         uint32_t sourceClock = 0;
 468
 469                                         if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) {
 470                                                 sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS);
 471                                         } else {
 472                                                 uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK;
 473                                                 sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256));
 474                                         }
 475                                         divider = chipcHw_divide(sourceClock, freq);
 476                                 }
 477                                 break;
 478                         }
 479                 } else {
 480                         divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq);
 481                 }
 482
 483                 if (divider) {
 484                         REG_LOCAL_IRQ_SAVE;
 485                         /* Set the divider to obtain the required frequency */
 486                         *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK);
 487                         REG_LOCAL_IRQ_RESTORE;
 488                         return freq;
 489                 }
 490         }
 491
 492         return 0;
 493 }
 494
 495 EXPORT_SYMBOL(chipcHw_setClockFrequency);
 496
 497 /****************************************************************************/
 498 /**
 499 *  @brief   Set VPM clock in sync with BUS clock for Chip Rev #A0
 500 *
 501 *  This function does the phase adjustment between VPM and BUS clock
 502 *
 503 *  @return >= 0 : On success (# of adjustment required)
 504 *            -1 : On failure
 505 *
 506 */
 507 /****************************************************************************/
 508 static int vpmPhaseAlignA0(void)
 509 {
 510         uint32_t phaseControl;
 511         uint32_t phaseValue;
 512         uint32_t prevPhaseComp;
 513         int iter = 0;
 514         int adjustCount = 0;
 515         int count = 0;
 516
 517         for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) {
 518                 phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT;
 519                 phaseValue = 0;
 520                 prevPhaseComp = 0;
 521
 522                 /* Step 1: Look for falling PH_COMP transition */
 523
 524                 /* Read the contents of VPM Clock resgister */
 525                 phaseValue = pChipcHw->VPMClock;
 526                 do {
 527                         /* Store previous value of phase comparator */
 528                         prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP;
 529                         /* Change the value of PH_CTRL. */
 530                         reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
 531                         /* Wait atleast 20 ns */
 532                         udelay(1);
 533                         /* Toggle the LOAD_CH after phase control is written. */
 534                         pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
 535                         /* Read the contents of  VPM Clock resgister. */
 536                         phaseValue = pChipcHw->VPMClock;
 537
 538                         if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
 539                                 phaseControl = (0x3F & (phaseControl - 1));
 540                         } else {
 541                                 /* Increment to the Phase count value for next write, if Phase is not stable. */
 542                                 phaseControl = (0x3F & (phaseControl + 1));
 543                         }
 544                         /* Count number of adjustment made */
 545                         adjustCount++;
 546                 } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || /* Look for a transition */
 547                           ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) &&  /* Look for a falling edge */
 548                          (adjustCount < MAX_PHASE_ADJUST_COUNT) /* Do not exceed the limit while trying */
 549                     );
 550
 551                 if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
 552                         /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
 553                         return -1;
 554                 }
 555
 556                 /* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */
 557
 558                 for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
 559                         phaseControl = (0x3F & (phaseControl + 1));
 560                         reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
 561                         /* Wait atleast 20 ns */
 562                         udelay(1);
 563                         /* Toggle the LOAD_CH after phase control is written. */
 564                         pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
 565                         phaseValue = pChipcHw->VPMClock;
 566                         /* Count number of adjustment made */
 567                         adjustCount++;
 568                 }
 569
 570                 if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
 571                         /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
 572                         return -1;
 573                 }
 574
 575                 if (count != 5) {
 576                         /* Detected false transition */
 577                         continue;
 578                 }
 579
 580                 /* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */
 581
 582                 for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) {
 583                         phaseControl = (0x3F & (phaseControl - 1));
 584                         reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
 585                         /* Wait atleast 20 ns */
 586                         udelay(1);
 587                         /* Toggle the LOAD_CH after phase control is written. */
 588                         pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
 589                         phaseValue = pChipcHw->VPMClock;
 590                         /* Count number of adjustment made */
 591                         adjustCount++;
 592                 }
 593
 594                 if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
 595                         /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
 596                         return -1;
 597                 }
 598
 599                 if (count != 3) {
 600                         /* Detected noisy transition */
 601                         continue;
 602                 }
 603
 604                 /* Step 4: Keep moving backward before the original transition took place. */
 605
 606                 for (count = 0; (count < 5); count++) {
 607                         phaseControl = (0x3F & (phaseControl - 1));
 608                         reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
 609                         /* Wait atleast 20 ns */
 610                         udelay(1);
 611                         /* Toggle the LOAD_CH after phase control is written. */
 612                         pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
 613                         phaseValue = pChipcHw->VPMClock;
 614                         /* Count number of adjustment made */
 615                         adjustCount++;
 616                 }
 617
 618                 if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
 619                         /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */
 620                         return -1;
 621                 }
 622
 623                 if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) {
 624                         /* Detected false transition */
 625                         continue;
 626                 }
 627
 628                 /* Step 5: Re discover the valid transition */
 629
 630                 do {
 631                         /* Store previous value of phase comparator */
 632                         prevPhaseComp = phaseValue;
 633                         /* Change the value of PH_CTRL. */
 634                         reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
 635                         /* Wait atleast 20 ns */
 636                         udelay(1);
 637                         /* Toggle the LOAD_CH after phase control is written. */
 638                         pChipcHw->VPMClock ^=
 639                             chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
 640                         /* Read the contents of  VPM Clock resgister. */
 641                         phaseValue = pChipcHw->VPMClock;
 642
 643                         if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) {
 644                                 phaseControl = (0x3F & (phaseControl - 1));
 645                         } else {
 646                                 /* Increment to the Phase count value for next write, if Phase is not stable. */
 647                                 phaseControl = (0x3F & (phaseControl + 1));
 648                         }
 649
 650                         /* Count number of adjustment made */
 651                         adjustCount++;
 652                 } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT));
 653
 654                 if (adjustCount >= MAX_PHASE_ADJUST_COUNT) {
 655                         /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries  */
 656                         return -1;
 657                 } else {
 658                         /* Valid phase must have detected */
 659                         break;
 660                 }
 661         }
 662
 663         /* For VPM Phase should be perfectly aligned. */
 664         phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F);
 665         {
 666                 REG_LOCAL_IRQ_SAVE;
 667
 668                 pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT);
 669                 /* Load new phase value */
 670                 pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
 671
 672                 REG_LOCAL_IRQ_RESTORE;
 673         }
 674         /* Return the status */
 675         return (int)adjustCount;
 676 }
 677
 678 /****************************************************************************/
 679 /**
 680 *  @brief   Set VPM clock in sync with BUS clock
 681 *
 682 *  This function does the phase adjustment between VPM and BUS clock
 683 *
 684 *  @return >= 0 : On success (# of adjustment required)
 685 *            -1 : On failure
 686 *
 687 */
 688 /****************************************************************************/
 689 int chipcHw_vpmPhaseAlign(void)
 690 {
 691
 692         if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) {
 693                 return vpmPhaseAlignA0();
 694         } else {
 695                 uint32_t phaseControl = chipcHw_getVpmPhaseControl();
 696                 uint32_t phaseValue = 0;
 697                 int adjustCount = 0;
 698
 699                 /* Disable VPM access */
 700                 pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
 701                 /* Disable HW VPM phase alignment  */
 702                 chipcHw_vpmHwPhaseAlignDisable();
 703                 /* Enable SW VPM phase alignment  */
 704                 chipcHw_vpmSwPhaseAlignEnable();
 705                 /* Adjust VPM phase */
 706                 while (adjustCount < MAX_PHASE_ADJUST_COUNT) {
 707                         phaseValue = chipcHw_getVpmHwPhaseAlignStatus();
 708
 709                         /* Adjust phase control value */
 710                         if (phaseValue > 0xF) {
 711                                 /* Increment phase control value */
 712                                 phaseControl++;
 713                         } else if (phaseValue < 0xF) {
 714                                 /* Decrement phase control value */
 715                                 phaseControl--;
 716                         } else {
 717                                 /* Enable VPM access */
 718                                 pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
 719                                 /* Return adjust count */
 720                                 return adjustCount;
 721                         }
 722                         /* Change the value of PH_CTRL. */
 723                         reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT));
 724                         /* Wait atleast 20 ns */
 725                         udelay(1);
 726                         /* Toggle the LOAD_CH after phase control is written. */
 727                         pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE;
 728                         /* Count adjustment */
 729                         adjustCount++;
 730                 }
 731         }
 732
 733         /* Disable VPM access */
 734         pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE;
 735         return -1;
 736 }
 737
 738 /****************************************************************************/
 739 /**
 740 *  @brief   Local Divide function
 741 *
 742 *  This function does the divide
 743 *
 744 *  @return divide value
 745 *
 746 */
 747 /****************************************************************************/
 748 static int chipcHw_divide(int num, int denom)
 749 {
 750         int r;
 751         int t = 1;
 752
 753         /* Shift denom and t up to the largest value to optimize algorithm */
 754         /* t contains the units of each divide */
 755         while ((denom & 0x40000000) == 0) {     /* fails if denom=0 */
 756                 denom = denom << 1;
 757                 t = t << 1;
 758         }
 759
 760         /* Initialize the result */
 761         r = 0;
 762
 763         do {
 764                 /* Determine if there exists a positive remainder */
 765                 if ((num - denom) >= 0) {
 766                         /* Accumlate t to the result and calculate a new remainder */
 767                         num = num - denom;
 768                         r = r + t;
 769                 }
 770                 /* Continue to shift denom and shift t down to 0 */
 771                 denom = denom >> 1;
 772                 t = t >> 1;
 773         } while (t != 0);
 774
 775         return r;
 776 }