Staging: hv: mousevsc: Cleanup alloc_input_device()
[zen-stable.git] / arch / arm / mach-footbridge / dc21285.c
blob1331fff51ae25352803b094a1a678b5a1ed9400e
1 /*
2 * linux/arch/arm/kernel/dec21285.c: PCI functions for DC21285
4 * Copyright (C) 1998-2001 Russell King
5 * Copyright (C) 1998-2000 Phil Blundell
7 * This program is free software; you can redistribute it and/or modify
8 * it under the terms of the GNU General Public License version 2 as
9 * published by the Free Software Foundation.
11 #include <linux/kernel.h>
12 #include <linux/pci.h>
13 #include <linux/interrupt.h>
14 #include <linux/mm.h>
15 #include <linux/slab.h>
16 #include <linux/init.h>
17 #include <linux/ioport.h>
18 #include <linux/irq.h>
19 #include <linux/io.h>
20 #include <linux/spinlock.h>
22 #include <asm/irq.h>
23 #include <asm/system.h>
24 #include <asm/mach/pci.h>
25 #include <asm/hardware/dec21285.h>
27 #define MAX_SLOTS 21
29 #define PCICMD_ABORT ((PCI_STATUS_REC_MASTER_ABORT| \
30 PCI_STATUS_REC_TARGET_ABORT)<<16)
32 #define PCICMD_ERROR_BITS ((PCI_STATUS_DETECTED_PARITY | \
33 PCI_STATUS_REC_MASTER_ABORT | \
34 PCI_STATUS_REC_TARGET_ABORT | \
35 PCI_STATUS_PARITY) << 16)
37 extern int setup_arm_irq(int, struct irqaction *);
38 extern void pcibios_report_status(u_int status_mask, int warn);
40 static unsigned long
41 dc21285_base_address(struct pci_bus *bus, unsigned int devfn)
43 unsigned long addr = 0;
45 if (bus->number == 0) {
46 if (PCI_SLOT(devfn) == 0)
48 * For devfn 0, point at the 21285
50 addr = ARMCSR_BASE;
51 else {
52 devfn -= 1 << 3;
54 if (devfn < PCI_DEVFN(MAX_SLOTS, 0))
55 addr = PCICFG0_BASE | 0xc00000 | (devfn << 8);
57 } else
58 addr = PCICFG1_BASE | (bus->number << 16) | (devfn << 8);
60 return addr;
63 static int
64 dc21285_read_config(struct pci_bus *bus, unsigned int devfn, int where,
65 int size, u32 *value)
67 unsigned long addr = dc21285_base_address(bus, devfn);
68 u32 v = 0xffffffff;
70 if (addr)
71 switch (size) {
72 case 1:
73 asm("ldrb %0, [%1, %2]"
74 : "=r" (v) : "r" (addr), "r" (where) : "cc");
75 break;
76 case 2:
77 asm("ldrh %0, [%1, %2]"
78 : "=r" (v) : "r" (addr), "r" (where) : "cc");
79 break;
80 case 4:
81 asm("ldr %0, [%1, %2]"
82 : "=r" (v) : "r" (addr), "r" (where) : "cc");
83 break;
86 *value = v;
88 v = *CSR_PCICMD;
89 if (v & PCICMD_ABORT) {
90 *CSR_PCICMD = v & (0xffff|PCICMD_ABORT);
91 return -1;
94 return PCIBIOS_SUCCESSFUL;
97 static int
98 dc21285_write_config(struct pci_bus *bus, unsigned int devfn, int where,
99 int size, u32 value)
101 unsigned long addr = dc21285_base_address(bus, devfn);
102 u32 v;
104 if (addr)
105 switch (size) {
106 case 1:
107 asm("strb %0, [%1, %2]"
108 : : "r" (value), "r" (addr), "r" (where)
109 : "cc");
110 break;
111 case 2:
112 asm("strh %0, [%1, %2]"
113 : : "r" (value), "r" (addr), "r" (where)
114 : "cc");
115 break;
116 case 4:
117 asm("str %0, [%1, %2]"
118 : : "r" (value), "r" (addr), "r" (where)
119 : "cc");
120 break;
123 v = *CSR_PCICMD;
124 if (v & PCICMD_ABORT) {
125 *CSR_PCICMD = v & (0xffff|PCICMD_ABORT);
126 return -1;
129 return PCIBIOS_SUCCESSFUL;
132 static struct pci_ops dc21285_ops = {
133 .read = dc21285_read_config,
134 .write = dc21285_write_config,
137 static struct timer_list serr_timer;
138 static struct timer_list perr_timer;
140 static void dc21285_enable_error(unsigned long __data)
142 switch (__data) {
143 case IRQ_PCI_SERR:
144 del_timer(&serr_timer);
145 break;
147 case IRQ_PCI_PERR:
148 del_timer(&perr_timer);
149 break;
152 enable_irq(__data);
156 * Warn on PCI errors.
158 static irqreturn_t dc21285_abort_irq(int irq, void *dev_id)
160 unsigned int cmd;
161 unsigned int status;
163 cmd = *CSR_PCICMD;
164 status = cmd >> 16;
165 cmd = cmd & 0xffff;
167 if (status & PCI_STATUS_REC_MASTER_ABORT) {
168 printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n",
169 instruction_pointer(get_irq_regs()));
170 cmd |= PCI_STATUS_REC_MASTER_ABORT << 16;
173 if (status & PCI_STATUS_REC_TARGET_ABORT) {
174 printk(KERN_DEBUG "PCI: target abort: ");
175 pcibios_report_status(PCI_STATUS_REC_MASTER_ABORT |
176 PCI_STATUS_SIG_TARGET_ABORT |
177 PCI_STATUS_REC_TARGET_ABORT, 1);
178 printk("\n");
180 cmd |= PCI_STATUS_REC_TARGET_ABORT << 16;
183 *CSR_PCICMD = cmd;
185 return IRQ_HANDLED;
188 static irqreturn_t dc21285_serr_irq(int irq, void *dev_id)
190 struct timer_list *timer = dev_id;
191 unsigned int cntl;
193 printk(KERN_DEBUG "PCI: system error received: ");
194 pcibios_report_status(PCI_STATUS_SIG_SYSTEM_ERROR, 1);
195 printk("\n");
197 cntl = *CSR_SA110_CNTL & 0xffffdf07;
198 *CSR_SA110_CNTL = cntl | SA110_CNTL_RXSERR;
201 * back off this interrupt
203 disable_irq(irq);
204 timer->expires = jiffies + HZ;
205 add_timer(timer);
207 return IRQ_HANDLED;
210 static irqreturn_t dc21285_discard_irq(int irq, void *dev_id)
212 printk(KERN_DEBUG "PCI: discard timer expired\n");
213 *CSR_SA110_CNTL &= 0xffffde07;
215 return IRQ_HANDLED;
218 static irqreturn_t dc21285_dparity_irq(int irq, void *dev_id)
220 unsigned int cmd;
222 printk(KERN_DEBUG "PCI: data parity error detected: ");
223 pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1);
224 printk("\n");
226 cmd = *CSR_PCICMD & 0xffff;
227 *CSR_PCICMD = cmd | 1 << 24;
229 return IRQ_HANDLED;
232 static irqreturn_t dc21285_parity_irq(int irq, void *dev_id)
234 struct timer_list *timer = dev_id;
235 unsigned int cmd;
237 printk(KERN_DEBUG "PCI: parity error detected: ");
238 pcibios_report_status(PCI_STATUS_PARITY | PCI_STATUS_DETECTED_PARITY, 1);
239 printk("\n");
241 cmd = *CSR_PCICMD & 0xffff;
242 *CSR_PCICMD = cmd | 1 << 31;
245 * back off this interrupt
247 disable_irq(irq);
248 timer->expires = jiffies + HZ;
249 add_timer(timer);
251 return IRQ_HANDLED;
254 int __init dc21285_setup(int nr, struct pci_sys_data *sys)
256 struct resource *res;
258 if (nr || !footbridge_cfn_mode())
259 return 0;
261 res = kzalloc(sizeof(struct resource) * 2, GFP_KERNEL);
262 if (!res) {
263 printk("out of memory for root bus resources");
264 return 0;
267 res[0].flags = IORESOURCE_MEM;
268 res[0].name = "Footbridge non-prefetch";
269 res[1].flags = IORESOURCE_MEM | IORESOURCE_PREFETCH;
270 res[1].name = "Footbridge prefetch";
272 allocate_resource(&iomem_resource, &res[1], 0x20000000,
273 0xa0000000, 0xffffffff, 0x20000000, NULL, NULL);
274 allocate_resource(&iomem_resource, &res[0], 0x40000000,
275 0x80000000, 0xffffffff, 0x40000000, NULL, NULL);
277 sys->resource[0] = &ioport_resource;
278 sys->resource[1] = &res[0];
279 sys->resource[2] = &res[1];
280 sys->mem_offset = DC21285_PCI_MEM;
282 return 1;
285 struct pci_bus * __init dc21285_scan_bus(int nr, struct pci_sys_data *sys)
287 return pci_scan_bus(0, &dc21285_ops, sys);
290 #define dc21285_request_irq(_a, _b, _c, _d, _e) \
291 WARN_ON(request_irq(_a, _b, _c, _d, _e) < 0)
293 void __init dc21285_preinit(void)
295 unsigned int mem_size, mem_mask;
296 int cfn_mode;
298 pcibios_min_mem = 0x81000000;
299 vga_base = PCIMEM_BASE;
301 mem_size = (unsigned int)high_memory - PAGE_OFFSET;
302 for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1)
303 if (mem_mask >= mem_size)
304 break;
307 * These registers need to be set up whether we're the
308 * central function or not.
310 *CSR_SDRAMBASEMASK = (mem_mask - 1) & 0x0ffc0000;
311 *CSR_SDRAMBASEOFFSET = 0;
312 *CSR_ROMBASEMASK = 0x80000000;
313 *CSR_CSRBASEMASK = 0;
314 *CSR_CSRBASEOFFSET = 0;
315 *CSR_PCIADDR_EXTN = 0;
317 cfn_mode = __footbridge_cfn_mode();
319 printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in "
320 "%s mode\n", *CSR_CLASSREV & 0xff, cfn_mode ?
321 "central function" : "addin");
323 if (footbridge_cfn_mode()) {
325 * Clear any existing errors - we aren't
326 * interested in historical data...
328 *CSR_SA110_CNTL = (*CSR_SA110_CNTL & 0xffffde07) |
329 SA110_CNTL_RXSERR;
330 *CSR_PCICMD = (*CSR_PCICMD & 0xffff) | PCICMD_ERROR_BITS;
333 init_timer(&serr_timer);
334 init_timer(&perr_timer);
336 serr_timer.data = IRQ_PCI_SERR;
337 serr_timer.function = dc21285_enable_error;
338 perr_timer.data = IRQ_PCI_PERR;
339 perr_timer.function = dc21285_enable_error;
342 * We don't care if these fail.
344 dc21285_request_irq(IRQ_PCI_SERR, dc21285_serr_irq, IRQF_DISABLED,
345 "PCI system error", &serr_timer);
346 dc21285_request_irq(IRQ_PCI_PERR, dc21285_parity_irq, IRQF_DISABLED,
347 "PCI parity error", &perr_timer);
348 dc21285_request_irq(IRQ_PCI_ABORT, dc21285_abort_irq, IRQF_DISABLED,
349 "PCI abort", NULL);
350 dc21285_request_irq(IRQ_DISCARD_TIMER, dc21285_discard_irq, IRQF_DISABLED,
351 "Discard timer", NULL);
352 dc21285_request_irq(IRQ_PCI_DPERR, dc21285_dparity_irq, IRQF_DISABLED,
353 "PCI data parity", NULL);
355 if (cfn_mode) {
356 static struct resource csrio;
358 csrio.flags = IORESOURCE_IO;
359 csrio.name = "Footbridge";
361 allocate_resource(&ioport_resource, &csrio, 128,
362 0xff00, 0xffff, 128, NULL, NULL);
365 * Map our SDRAM at a known address in PCI space, just in case
366 * the firmware had other ideas. Using a nonzero base is
367 * necessary, since some VGA cards forcefully use PCI addresses
368 * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards).
370 *CSR_PCICSRBASE = 0xf4000000;
371 *CSR_PCICSRIOBASE = csrio.start;
372 *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET);
373 *CSR_PCIROMBASE = 0;
374 *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER |
375 PCI_COMMAND_INVALIDATE | PCICMD_ERROR_BITS;
376 } else if (footbridge_cfn_mode() != 0) {
378 * If we are not compiled to accept "add-in" mode, then
379 * we are using a constant virt_to_bus translation which
380 * can not hope to cater for the way the host BIOS has
381 * set up the machine.
383 panic("PCI: this kernel is compiled for central "
384 "function mode only");
388 void __init dc21285_postinit(void)
390 register_isa_ports(DC21285_PCI_MEM, DC21285_PCI_IO, 0);