arch/arm/mach-omap1/dma.c

   1 /*
   2  * OMAP1/OMAP7xx - specific DMA driver
   3  *
   4  * Copyright (C) 2003 - 2008 Nokia Corporation
   5  * Author: Juha Yrjölä <juha.yrjola@nokia.com>
   6  * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
   7  * Graphics DMA and LCD DMA graphics tranformations
   8  * by Imre Deak <imre.deak@nokia.com>
   9  * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
  10  * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
  11  *
  12  * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/
  13  * Converted DMA library into platform driver
  14  *                   - G, Manjunath Kondaiah <manjugk@ti.com>
  15  *
  16  * This program is free software; you can redistribute it and/or modify
  17  * it under the terms of the GNU General Public License version 2 as
  18  * published by the Free Software Foundation.
  19  */
  20
  21 #include <linux/err.h>
  22 #include <linux/io.h>
  23 #include <linux/slab.h>
  24 #include <linux/module.h>
  25 #include <linux/init.h>
  26 #include <linux/device.h>
  27
  28 #include <plat/dma.h>
  29 #include <plat/tc.h>
  30 #include <plat/irqs.h>
  31
  32 #define OMAP1_DMA_BASE                  (0xfffed800)
  33 #define OMAP1_LOGICAL_DMA_CH_COUNT      17
  34 #define OMAP1_DMA_STRIDE                0x40
  35
  36 static u32 errata;
  37 static u32 enable_1510_mode;
  38 static u8 dma_stride;
  39 static enum omap_reg_offsets dma_common_ch_start, dma_common_ch_end;
  40
  41 static u16 reg_map[] = {
  42         [GCR]           = 0x400,
  43         [GSCR]          = 0x404,
  44         [GRST1]         = 0x408,
  45         [HW_ID]         = 0x442,
  46         [PCH2_ID]       = 0x444,
  47         [PCH0_ID]       = 0x446,
  48         [PCH1_ID]       = 0x448,
  49         [PCHG_ID]       = 0x44a,
  50         [PCHD_ID]       = 0x44c,
  51         [CAPS_0]        = 0x44e,
  52         [CAPS_1]        = 0x452,
  53         [CAPS_2]        = 0x456,
  54         [CAPS_3]        = 0x458,
  55         [CAPS_4]        = 0x45a,
  56         [PCH2_SR]       = 0x460,
  57         [PCH0_SR]       = 0x480,
  58         [PCH1_SR]       = 0x482,
  59         [PCHD_SR]       = 0x4c0,
  60
  61         /* Common Registers */
  62         [CSDP]          = 0x00,
  63         [CCR]           = 0x02,
  64         [CICR]          = 0x04,
  65         [CSR]           = 0x06,
  66         [CEN]           = 0x10,
  67         [CFN]           = 0x12,
  68         [CSFI]          = 0x14,
  69         [CSEI]          = 0x16,
  70         [CPC]           = 0x18, /* 15xx only */
  71         [CSAC]          = 0x18,
  72         [CDAC]          = 0x1a,
  73         [CDEI]          = 0x1c,
  74         [CDFI]          = 0x1e,
  75         [CLNK_CTRL]     = 0x28,
  76
  77         /* Channel specific register offsets */
  78         [CSSA]          = 0x08,
  79         [CDSA]          = 0x0c,
  80         [COLOR]         = 0x20,
  81         [CCR2]          = 0x24,
  82         [LCH_CTRL]      = 0x2a,
  83 };
  84
  85 static struct resource res[] __initdata = {
  86         [0] = {
  87                 .start  = OMAP1_DMA_BASE,
  88                 .end    = OMAP1_DMA_BASE + SZ_2K - 1,
  89                 .flags  = IORESOURCE_MEM,
  90         },
  91         [1] = {
  92                 .name   = "0",
  93                 .start  = INT_DMA_CH0_6,
  94                 .flags  = IORESOURCE_IRQ,
  95         },
  96         [2] = {
  97                 .name   = "1",
  98                 .start  = INT_DMA_CH1_7,
  99                 .flags  = IORESOURCE_IRQ,
 100         },
 101         [3] = {
 102                 .name   = "2",
 103                 .start  = INT_DMA_CH2_8,
 104                 .flags  = IORESOURCE_IRQ,
 105         },
 106         [4] = {
 107                 .name   = "3",
 108                 .start  = INT_DMA_CH3,
 109                 .flags  = IORESOURCE_IRQ,
 110         },
 111         [5] = {
 112                 .name   = "4",
 113                 .start  = INT_DMA_CH4,
 114                 .flags  = IORESOURCE_IRQ,
 115         },
 116         [6] = {
 117                 .name   = "5",
 118                 .start  = INT_DMA_CH5,
 119                 .flags  = IORESOURCE_IRQ,
 120         },
 121         /* Handled in lcd_dma.c */
 122         [7] = {
 123                 .name   = "6",
 124                 .start  = INT_1610_DMA_CH6,
 125                 .flags  = IORESOURCE_IRQ,
 126         },
 127         /* irq's for omap16xx and omap7xx */
 128         [8] = {
 129                 .name   = "7",
 130                 .start  = INT_1610_DMA_CH7,
 131                 .flags  = IORESOURCE_IRQ,
 132         },
 133         [9] = {
 134                 .name   = "8",
 135                 .start  = INT_1610_DMA_CH8,
 136                 .flags  = IORESOURCE_IRQ,
 137         },
 138         [10] = {
 139                 .name  = "9",
 140                 .start = INT_1610_DMA_CH9,
 141                 .flags = IORESOURCE_IRQ,
 142         },
 143         [11] = {
 144                 .name  = "10",
 145                 .start = INT_1610_DMA_CH10,
 146                 .flags = IORESOURCE_IRQ,
 147         },
 148         [12] = {
 149                 .name  = "11",
 150                 .start = INT_1610_DMA_CH11,
 151                 .flags = IORESOURCE_IRQ,
 152         },
 153         [13] = {
 154                 .name  = "12",
 155                 .start = INT_1610_DMA_CH12,
 156                 .flags = IORESOURCE_IRQ,
 157         },
 158         [14] = {
 159                 .name  = "13",
 160                 .start = INT_1610_DMA_CH13,
 161                 .flags = IORESOURCE_IRQ,
 162         },
 163         [15] = {
 164                 .name  = "14",
 165                 .start = INT_1610_DMA_CH14,
 166                 .flags = IORESOURCE_IRQ,
 167         },
 168         [16] = {
 169                 .name  = "15",
 170                 .start = INT_1610_DMA_CH15,
 171                 .flags = IORESOURCE_IRQ,
 172         },
 173         [17] = {
 174                 .name  = "16",
 175                 .start = INT_DMA_LCD,
 176                 .flags = IORESOURCE_IRQ,
 177         },
 178 };
 179
 180 static void __iomem *dma_base;
 181 static inline void dma_write(u32 val, int reg, int lch)
 182 {
 183         u8  stride;
 184         u32 offset;
 185
 186         stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
 187         offset = reg_map[reg] + (stride * lch);
 188
 189         __raw_writew(val, dma_base + offset);
 190         if ((reg > CLNK_CTRL && reg < CCEN) ||
 191                         (reg > PCHD_ID && reg < CAPS_2)) {
 192                 u32 offset2 = reg_map[reg] + 2 + (stride * lch);
 193                 __raw_writew(val >> 16, dma_base + offset2);
 194         }
 195 }
 196
 197 static inline u32 dma_read(int reg, int lch)
 198 {
 199         u8 stride;
 200         u32 offset, val;
 201
 202         stride = (reg >= dma_common_ch_start) ? dma_stride : 0;
 203         offset = reg_map[reg] + (stride * lch);
 204
 205         val = __raw_readw(dma_base + offset);
 206         if ((reg > CLNK_CTRL && reg < CCEN) ||
 207                         (reg > PCHD_ID && reg < CAPS_2)) {
 208                 u16 upper;
 209                 u32 offset2 = reg_map[reg] + 2 + (stride * lch);
 210                 upper = __raw_readw(dma_base + offset2);
 211                 val |= (upper << 16);
 212         }
 213         return val;
 214 }
 215
 216 static void omap1_clear_lch_regs(int lch)
 217 {
 218         int i = dma_common_ch_start;
 219
 220         for (; i <= dma_common_ch_end; i += 1)
 221                 dma_write(0, i, lch);
 222 }
 223
 224 static void omap1_clear_dma(int lch)
 225 {
 226         u32 l;
 227
 228         l = dma_read(CCR, lch);
 229         l &= ~OMAP_DMA_CCR_EN;
 230         dma_write(l, CCR, lch);
 231
 232         /* Clear pending interrupts */
 233         l = dma_read(CSR, lch);
 234 }
 235
 236 static void omap1_show_dma_caps(void)
 237 {
 238         if (enable_1510_mode) {
 239                 printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
 240         } else {
 241                 u16 w;
 242                 printk(KERN_INFO "OMAP DMA hardware version %d\n",
 243                                                         dma_read(HW_ID, 0));
 244                 printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
 245                         dma_read(CAPS_0, 0), dma_read(CAPS_1, 0),
 246                         dma_read(CAPS_2, 0), dma_read(CAPS_3, 0),
 247                         dma_read(CAPS_4, 0));
 248
 249                 /* Disable OMAP 3.0/3.1 compatibility mode. */
 250                 w = dma_read(GSCR, 0);
 251                 w |= 1 << 3;
 252                 dma_write(w, GSCR, 0);
 253         }
 254         return;
 255 }
 256
 257 static u32 configure_dma_errata(void)
 258 {
 259
 260         /*
 261          * Erratum 3.2/3.3: sometimes 0 is returned if CSAC/CDAC is
 262          * read before the DMA controller finished disabling the channel.
 263          */
 264         if (!cpu_is_omap15xx())
 265                 SET_DMA_ERRATA(DMA_ERRATA_3_3);
 266
 267         return errata;
 268 }
 269
 270 static int __init omap1_system_dma_init(void)
 271 {
 272         struct omap_system_dma_plat_info        *p;
 273         struct omap_dma_dev_attr                *d;
 274         struct platform_device                  *pdev;
 275         int ret;
 276
 277         pdev = platform_device_alloc("omap_dma_system", 0);
 278         if (!pdev) {
 279                 pr_err("%s: Unable to device alloc for dma\n",
 280                         __func__);
 281                 return -ENOMEM;
 282         }
 283
 284         dma_base = ioremap(res[0].start, resource_size(&res[0]));
 285         if (!dma_base) {
 286                 pr_err("%s: Unable to ioremap\n", __func__);
 287                 ret = -ENODEV;
 288                 goto exit_device_put;
 289         }
 290
 291         ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
 292         if (ret) {
 293                 dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 294                         __func__, pdev->name, pdev->id);
 295                 goto exit_device_put;
 296         }
 297
 298         p = kzalloc(sizeof(struct omap_system_dma_plat_info), GFP_KERNEL);
 299         if (!p) {
 300                 dev_err(&pdev->dev, "%s: Unable to allocate 'p' for %s\n",
 301                         __func__, pdev->name);
 302                 ret = -ENOMEM;
 303                 goto exit_device_del;
 304         }
 305
 306         d = kzalloc(sizeof(struct omap_dma_dev_attr), GFP_KERNEL);
 307         if (!d) {
 308                 dev_err(&pdev->dev, "%s: Unable to allocate 'd' for %s\n",
 309                         __func__, pdev->name);
 310                 ret = -ENOMEM;
 311                 goto exit_release_p;
 312         }
 313
 314         d->lch_count            = OMAP1_LOGICAL_DMA_CH_COUNT;
 315
 316         /* Valid attributes for omap1 plus processors */
 317         if (cpu_is_omap15xx())
 318                 d->dev_caps = ENABLE_1510_MODE;
 319         enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
 320
 321         d->dev_caps             |= SRC_PORT;
 322         d->dev_caps             |= DST_PORT;
 323         d->dev_caps             |= SRC_INDEX;
 324         d->dev_caps             |= DST_INDEX;
 325         d->dev_caps             |= IS_BURST_ONLY4;
 326         d->dev_caps             |= CLEAR_CSR_ON_READ;
 327         d->dev_caps             |= IS_WORD_16;
 328
 329
 330         d->chan = kzalloc(sizeof(struct omap_dma_lch) *
 331                                         (d->lch_count), GFP_KERNEL);
 332         if (!d->chan) {
 333                 dev_err(&pdev->dev, "%s: Memory allocation failed"
 334                                         "for d->chan!!!\n", __func__);
 335                 goto exit_release_d;
 336         }
 337
 338         if (cpu_is_omap15xx())
 339                 d->chan_count = 9;
 340         else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
 341                 if (!(d->dev_caps & ENABLE_1510_MODE))
 342                         d->chan_count = 16;
 343                 else
 344                         d->chan_count = 9;
 345         }
 346
 347         p->dma_attr = d;
 348
 349         p->show_dma_caps        = omap1_show_dma_caps;
 350         p->clear_lch_regs       = omap1_clear_lch_regs;
 351         p->clear_dma            = omap1_clear_dma;
 352         p->dma_write            = dma_write;
 353         p->dma_read             = dma_read;
 354         p->disable_irq_lch      = NULL;
 355
 356         p->errata = configure_dma_errata();
 357
 358         ret = platform_device_add_data(pdev, p, sizeof(*p));
 359         if (ret) {
 360                 dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 361                         __func__, pdev->name, pdev->id);
 362                 goto exit_release_chan;
 363         }
 364
 365         ret = platform_device_add(pdev);
 366         if (ret) {
 367                 dev_err(&pdev->dev, "%s: Unable to add resources for %s%d\n",
 368                         __func__, pdev->name, pdev->id);
 369                 goto exit_release_chan;
 370         }
 371
 372         dma_stride              = OMAP1_DMA_STRIDE;
 373         dma_common_ch_start     = CPC;
 374         dma_common_ch_end       = COLOR;
 375
 376         return ret;
 377
 378 exit_release_chan:
 379         kfree(d->chan);
 380 exit_release_d:
 381         kfree(d);
 382 exit_release_p:
 383         kfree(p);
 384 exit_device_del:
 385         platform_device_del(pdev);
 386 exit_device_put:
 387         platform_device_put(pdev);
 388
 389         return ret;
 390 }
 391 arch_initcall(omap1_system_dma_init);